OSDN Git Service
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:31 +0000 (12:15 -0700)]
staging: comedi: amplc_pci230: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:30 +0000 (12:15 -0700)]
staging: comedi: amplc_pci224: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:29 +0000 (12:15 -0700)]
staging: comedi: drivers: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H Hartley Sweeten [Wed, 4 Mar 2015 19:15:28 +0000 (12:15 -0700)]
staging: comedi: comedi_fops: (!foo) preferred over (foo == NULL)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:07:13 +0000 (22:07 +0300)]
Staging: ste_rmi4: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:05:05 +0000 (22:05 +0300)]
Staging: slicoss: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:03:53 +0000 (22:03 +0300)]
Staging: iio: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:03:05 +0000 (22:03 +0300)]
Staging: rts5208: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:01:38 +0000 (22:01 +0300)]
Staging: comedi: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:00:42 +0000 (22:00 +0300)]
Staging: gdm72xx: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 19:00:10 +0000 (22:00 +0300)]
Staging: media: clean dev_err logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 18:59:04 +0000 (21:59 +0300)]
Staging: fbtft: clean dev_err() logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E, R;
expression msg;
@@
dev_err(E, msg, __func__, R);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "", 1);
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "", 1);
coccinelle.y = m;
elif(e.find("%s:") == True):
m = e.replace("%s:", "", 1);
coccinelle.y = m;
else:
m = e.replace("%s", "",1);
coccinelle.y = m;
@c@
expression a.E, a.msg, a.R;
identifier b.y;
@@
- dev_err(E, msg, __func__, R);
+ dev_err(E, y, R);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Fri, 6 Mar 2015 17:01:07 +0000 (20:01 +0300)]
Staging: media: Replace dev_err with pr_err to avoid null pointer derefrence
This patch replace dev_err with pr_err, for pointer is derefrenced after comparing it to NULL.
This was found using the following coccinelle script:
@disable is_null@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if(E == NULL) S
f(...,E->fld,...);
-if(E == NULL) S;
@@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if(!E) S
f(...,E->fld,...);
-if(!E) S;
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Thu, 5 Mar 2015 10:01:49 +0000 (13:01 +0300)]
Staging: comedi: Clean dev_err() logging
This patch removes __func__ from dev_err. dev_err includes information about:
(devcice, driver, specific instance of device, etc) in the log printout, so there is no need for __func__.
This was done using Coccinelle, with the following semantic patch:
@a@
expression E;
expression msg;
@@
dev_err(E, msg, __func__);
@script:python b@
e << a.msg;
y;
@@
if(e.find("%s: ") == True):
m = e.replace("%s: ", "");
coccinelle.y = m;
elif(e.find("%s ") == True):
m = e.replace("%s ", "");
coccinelle.y = m;
else:
m = e.replace("%s", "");
@c@
expression a.E, a.msg;
identifier b.y;
@@
- dev_err(E, msg, __func__);
+ dev_err(E, y);
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ksenija Stanojevic [Wed, 4 Mar 2015 23:51:46 +0000 (00:51 +0100)]
Staging: rtl8192u: Replace TRUE with true
This patch replaces TRUE by true, since Linux kernel has already a
boolean type, bool, defined in linux/stddef.h
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yeliz Taneroglu [Wed, 4 Mar 2015 21:15:16 +0000 (23:15 +0200)]
Staging: rtl8723au: Fixed error 'else should follow close brace '}".
This patch fixes error 'else should follow close brace '}"
found by checkpatch in driver rtl8723au.
Signed-off-by: Yeliz Taneroglu <yeliztaneroglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yeliz Taneroglu [Wed, 4 Mar 2015 19:32:49 +0000 (21:32 +0200)]
Staging: unisys: Remove unnecessary semicolon
This fixes the checkpatch.pl warning:
WARNING: macros should not use a trailing semicolon.
Signed-off-by: Yeliz Taneroglu <yeliztaneroglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cristina Opriceana [Wed, 4 Mar 2015 10:37:28 +0000 (12:37 +0200)]
Staging: drivers: Bool initializations should use true/false
This patch replaces bool initializations of 1/0 with true/false in order
to increase readability and respect the standards. Warning found by
coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Navya Sri Nizamkari [Wed, 4 Mar 2015 08:45:05 +0000 (14:15 +0530)]
staging: rtl8192e: Remove if conditions.
This patch removes if conditions with no exececutable
statements in the bodies of those ifs and also no variable
assignments in the if conditional checks. The call to
rtllib_act_scanning in the condition doesn't have any side
effects as it too performs conditional checks without changing
any values. Hence, it's safe to remove the if condition.
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somya Anand [Wed, 4 Mar 2015 08:40:46 +0000 (14:10 +0530)]
Staging: rtl8188eu: Remove unnecessary return statements
This patch removes unnecessary return statement from a void
function.
This issue is identified by checkpatch.pl
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somya Anand [Wed, 4 Mar 2015 08:40:44 +0000 (14:10 +0530)]
Staging: rtl8188eu: Remove redundant local variable
This patch removes a redundant variable "raid" and adds inline
return statements.
This issue is identified by the following coccinelle script:
@@
expression ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 07:00:02 +0000 (09:00 +0200)]
staging: rtl8712: replace memset(x,0,ETH_ALEN)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The aforementioned function replaces
memset. In addition, linux/etherdevice.h was included as a header
since it is the file that defines the inline function eth_zero_addr().
The changes were carried out using the following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:56:45 +0000 (08:56 +0200)]
staging: rtl8188eu: replace memset(x,0,ETH_ALEN)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The aforementioned function replaces
memset. In addition, linux/etherdevice.h was included as a header
since it is the file that define the inline function eth_zero_addr().
The changes were carried out using the following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:20:14 +0000 (08:20 +0200)]
staging: unisys: virthba: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:19:50 +0000 (08:19 +0200)]
staging: slicoss: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:19:24 +0000 (08:19 +0200)]
staging: rts5208: remove extra parentheses around left bit shift operation
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:18:47 +0000 (08:18 +0200)]
staging: ozwpan: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:18:19 +0000 (08:18 +0200)]
staging: lustre: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:35:48 +0000 (07:35 +0200)]
staging: xgifb: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:35:28 +0000 (07:35 +0200)]
staging: speakup: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:34:52 +0000 (07:34 +0200)]
staging: slicoss: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:34:07 +0000 (07:34 +0200)]
staging: rtl8723au: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:33:39 +0000 (07:33 +0200)]
staging: rtl8712: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:33:06 +0000 (07:33 +0200)]
staging: rtl8192u: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:32:30 +0000 (07:32 +0200)]
staging: rtl8192e: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:31:56 +0000 (07:31 +0200)]
staging: rtl8188eu: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:31:19 +0000 (07:31 +0200)]
staging: media: lirc: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:30:49 +0000 (07:30 +0200)]
staging: media: bcm2048: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:30:18 +0000 (07:30 +0200)]
staging: lustre: llite: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:29:28 +0000 (07:29 +0200)]
staging: lustre: lclient: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when the resultant value is assigned
to a variable. The issue was detected and resolved using the
following coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:28:48 +0000 (07:28 +0200)]
staging: comedi: drivers: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The issue was detected and resolved using the following coccinelle
script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaishali Thakkar [Tue, 3 Mar 2015 17:04:22 +0000 (22:34 +0530)]
Staging: rtl8712: Eliminate use of _init_timer
This patch introduces the use of API function setup_timer
instead of driver specific function _init_timer as it is
the preferred and standard way to setup and set the timer.
To be compatible with the change, argument types of
referenced functions are changed. Also, definition of
function _init_timer is removed as it is no longer needed
after this change.
This is done using Coccinelle and semantic patch used for
this is as follows:
@@ expression x, y; identifier a, b;@@
- _init_timer (&x, y, a, b);
+ setup_timer (&x, a, (unsigned long)b);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:08:38 +0000 (16:08 +0200)]
staging: rtl8192u: ieee80211: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:06:19 +0000 (16:06 +0200)]
staging: rtl8192u: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:04:20 +0000 (16:04 +0200)]
staging: rtl8192e: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:03:35 +0000 (16:03 +0200)]
staging: rtl8192e: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaishali Thakkar [Tue, 3 Mar 2015 07:39:23 +0000 (13:09 +0530)]
Staging: rtl8192u: Fix duplicate conditional branch
Replace duplicate branch with correct value. This branch
is supposed to work for low thresh value.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vaishali Thakkar [Tue, 3 Mar 2015 07:38:24 +0000 (13:08 +0530)]
Staging: rtl8192e: Eliminate use of macro IS_NIC_DOWN
This patch eliminates use of unnecessory macro IS_NIC_DOWN
and replaces it with standard code.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dilek Uzulmez [Mon, 2 Mar 2015 21:56:54 +0000 (23:56 +0200)]
Staging: rtl8192u: Fix quoted string split across lines
This patch fixes checkpatch.pl warning in file ieee80211_crypt.c
WARNING: "quoted string split across lines warning"
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Supriya Karanth [Tue, 3 Mar 2015 14:48:21 +0000 (23:48 +0900)]
staging: lustre: remove initialization of static ints
static ints are initialized to 0 by the compiler.
Explicit initialization is not necessary.
Found by checkpatch.pl - ERROR: do not initialise statics to 0 or NULL
changes made using coccinelle script:
@@
type T;
identifier var;
@@
-static T var = 0;
+static T var;
Signed-off-by: Supriya Karanth <iskaranth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cristina Opriceana [Wed, 4 Mar 2015 00:37:15 +0000 (02:37 +0200)]
Staging: iio: Added define guards where needed
The following files were added define guards to prevent multiple
inclusion.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Tue, 3 Mar 2015 14:27:37 +0000 (16:27 +0200)]
staging: iio: meter: add check on return variables
adds checks on variables that are used to return values. If
the value is less than zero, this indicates that an error
occurred and hence a message is printed through dev_err.
Checks are made on negative values only since spi_* functions
return negative error codes.
The functions were found using the following script but the
aforementioned modification was what was carried out in the end:
@@
identifier len,f;
@@
-int len;
... when != len
when strict
-len =
+return
f(...);
-return len;
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Navya Sri Nizamkari [Tue, 3 Mar 2015 11:38:06 +0000 (17:08 +0530)]
staging: comedi: Remove if condition.
This patch removes a if condition which has a semicolon
after it. As the conditional check is redundant, the comment
before it is also changed. The following
coccinelle script was used to detect the pattern of a
semicolon after if.
@r1@
position p;
@@
if (...);@p
@script:python@
p0 << r1.p;
@@
// Emacs org-mode output
cocci.print_main("", p0)
cocci.print_secs("", p0)
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tina Johnson [Mon, 2 Mar 2015 18:10:26 +0000 (23:40 +0530)]
staging: lustre: lustre: libcfs: Replaced printk() with pr_err() and pr_cont()
The following checkpatch warning was fixed:
Prefer [subsystem eg: netdev]_err([subsystem]dev
with the help of Coccinelle. pr_cont() was used to replace those printk
statements which followed a printk that did not end with a '\n'. The following
semantic patch was used to replace printk() with pr_err():
@a@
expression e;
@@
printk(e,...);
@script:python b@
e << a.e;
y;
@@
import re
match = re.match('KERN_ERR ', e);
if (match == None):
cocci.include_match(False)
else:
m = re.sub('KERN_ERR ', '', e)
coccinelle.y = m;
@c@
expression a.e;
identifier b.y;
@@
- printk(e,
+ pr_err(y,
...);
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tina Johnson [Mon, 2 Mar 2015 18:10:25 +0000 (23:40 +0530)]
staging: lustre: lustre: libcfs: Replaced printk() with pr_err()
The following checkpatch warning was fixed:
Prefer [subsystem eg: netdev]_err([subsystem]dev
with the help of Coccinelle. The following semantic patch was used:
@a@
expression e;
@@
printk(e,...);
@script:python b@
e << a.e;
y;
@@
import re
match = re.match('KERN_ERR ', e);
if (match == None):
cocci.include_match(False)
else:
m = re.sub('KERN_ERR ', '', e)
coccinelle.y = m;
@c@
expression a.e;
identifier b.y;
@@
- printk(e,
+ pr_err(y,
...);
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:25:03 +0000 (15:25 -0500)]
staging: rtl8723au: odm.c: Break some lines down to 80 characters
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:25:02 +0000 (15:25 -0500)]
staging: rtl8723au: ODM_Write_DIG23A(): Cosmetic cleanups
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:25:01 +0000 (15:25 -0500)]
staging: rtl8723au: Clean up odm_RefreshRateAdaptiveMask()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:25:00 +0000 (15:25 -0500)]
staging: rtl8723au: Clean up FindMinimumRSSI()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:59 +0000 (15:24 -0500)]
staging: rtl8723au: Clean up odm_RSSIMonitorCheck()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:58 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_TXPowerTrackingCheck23a(): Remove no-op function
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:57 +0000 (15:24 -0500)]
staging: rtl8723au: Remove write only bIsCurRDLState
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:56 +0000 (15:24 -0500)]
staging: rtl8723au: Remove unused struct pri_cca
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:55 +0000 (15:24 -0500)]
staging: rtl8723au: Remove unused struct odm_fat_t
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:54 +0000 (15:24 -0500)]
staging: rtl8723au: Remove unused Funai TV hack
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:53 +0000 (15:24 -0500)]
staging: rtl8723au: Remove write-only variable ControlChannel
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:52 +0000 (15:24 -0500)]
staging: rtl8723au: SupportInterface is always set to USB
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:51 +0000 (15:24 -0500)]
staging: rtl8723au: Remove no-op ODM_CMNINFO_PLATFORM
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:50 +0000 (15:24 -0500)]
staging: rtl8723au: odm_dtc(): Remove no-op function
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:49 +0000 (15:24 -0500)]
staging: rtl8723au: Make odm_PHY_SaveAFERegisters() readable
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:48 +0000 (15:24 -0500)]
staging: rtl8723au: Remove unused ODM ability flags
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:47 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_RF_CALIBRATION is never set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:46 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_RF_TX_PWR_TRACK is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:45 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_PWR_SAVE is unused
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:44 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_CCK_PD is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:43 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_RSSI_MONITOR is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:42 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_FA_CNT is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:41 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_DYNAMIC_TXPWR isn't used for anything
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:40 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_DIG is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:39 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_BB_RA_MASK is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:38 +0000 (15:24 -0500)]
staging: rtl8723au: ODM_MAC_EDCA_TURBO is always set
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:37 +0000 (15:24 -0500)]
staging: rtl8723au: Avoid zero initializing variables unnecessarily
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 2 Mar 2015 20:24:36 +0000 (15:24 -0500)]
staging: rtl8723au: Variable bbtchange is always false
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 18:38:22 +0000 (21:38 +0300)]
Staging: emxx_udc: Remove custom printk macro ERR
This patch removes custom printk macro ERR.
All the calls to this macro were replaced by de_err and pr_err.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 18:37:38 +0000 (21:37 +0300)]
Staging: emxx_udc: Replace custom printk macro ERR with dev_err or pr_err
This patch removes the use of custom printk macros ERR and replace it
with dev_err, or pr_err in the following cases:
- if no appropriate struct device *dev field where found for dev_err.
- or dev could be null eg. "dev_err(udc->dev" not possible inside "if
(udc == null)"
Issue addressed by checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 18:33:18 +0000 (21:33 +0300)]
Staging: emxx_udc: Remove argument test from function
This patch removes the test statement for an argument to _nbu2ss_pullup
function, for it can't be null due to previous derefrences.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 17:01:42 +0000 (20:01 +0300)]
Staging: emxx_udc: Fix do not add new typedefs and remove volatile
This patch fixes the following checkpatch.pl warnings:"do not add new
typedefs" and "Use of volatile is usually wrong".
Remove typedefs keyword and rename identifiers appropriately.
Remove volatile from union usb_regs_access
Update related files.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dilek Uzulmez [Mon, 2 Mar 2015 21:28:14 +0000 (23:28 +0200)]
Staging: fbtft: Remove unnecessary 'out of memory' message.
This patch fixes checkpatch.pl warning in file fb_ssd1351.c
WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dilek Uzulmez [Mon, 2 Mar 2015 20:56:53 +0000 (22:56 +0200)]
Staging: fbtft: Remove unnecessary 'out of memory' message.
This patch fixes checkpatch.pl warning in file fbtft-core.c
WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yeliz Taneroglu [Mon, 2 Mar 2015 15:49:59 +0000 (17:49 +0200)]
Staging: fbtft-core: remove unnecessary line continuations
This fixes the checkpatch.pl warning:
WARNING: Avoid unnecessary line continuations
Signed-off-by: Yeliz Taneroglu <yeliztaneroglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Alessandrelli [Sun, 22 Feb 2015 19:28:44 +0000 (20:28 +0100)]
staging: rtl8723au: rtl8723a_hal_init.c: remove unnecessary braces
Fix all checkpatch "braces {} are not necessary" warnings for
rtl8723au/hal/rtl8723a_hal_init.c
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:34 +0000 (15:45 -0500)]
staging: rtl8723au: MAX_AGGR_NUM is not used
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:33 +0000 (15:45 -0500)]
staging: rtl8723au: The RF on an 8723au is always a 6052
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:32 +0000 (15:45 -0500)]
staging: rtl8723au: Remove rf type from struct hal_version
This gets rid of yet another duplicated copy of the RF type
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:31 +0000 (15:45 -0500)]
staging: rtl8723au: Be more consistent in checking for 2 TX paths
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Fri, 27 Feb 2015 20:45:30 +0000 (15:45 -0500)]
staging: rtl8723au: No need for two copies of rf_type
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:21 +0000 (17:52 -0500)]
staging: rtl8723au: Firmware always handles adaptive rates
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:20 +0000 (17:52 -0500)]
staging: rtl8723au: hal_com.h: Remove some unused #defines
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:19 +0000 (17:52 -0500)]
staging: rtl8723au: Remove more unused #defines
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Mon, 9 Feb 2015 22:52:18 +0000 (17:52 -0500)]
staging: rtl8723au: rtl8723a_add_rateatid() simplyfy code
No point shifting raid right, just to shift it left again before
re-adding it.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OSDN Git Service
