OSDN Git Service
Matthew Brost [Wed, 21 Jul 2021 21:50:56 +0000 (14:50 -0700)]
drm/i915/guc: Disable semaphores when using GuC scheduling
Semaphores are an optimization and not required for basic GuC submission
to work properly. Disable until we have time to do the implementation to
enable semaphores and tune them for performance. Also long direction is
just to delete semaphores from the i915 so another reason to not enable
these for GuC submission.
This patch fixes an existing bugs where I915_ENGINE_HAS_SEMAPHORES was
not honored correctly.
v2: Reword commit message
v3:
(John H)
- Add text to commit indicating this also fixing an existing bug
v4:
(John H)
- s/bug/bugs
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-14-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:55 +0000 (14:50 -0700)]
drm/i915/guc: Ensure request ordering via completion fences
If two requests are on the same ring, they are explicitly ordered by the
HW. So, a submission fence is sufficient to ensure ordering when using
the new GuC submission interface. Conversely, if two requests share a
timeline and are on the same physical engine but different context this
doesn't ensure ordering on the new GuC submission interface. So, a
completion fence needs to be used to ensure ordering.
v2:
(Daniele)
- Don't delete spin lock
v3:
(Daniele)
- Delete forward dec
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-13-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:54 +0000 (14:50 -0700)]
drm/i915: Disable preempt busywait when using GuC scheduling
Disable preempt busywait when using GuC scheduling. This isn't needed as
the GuC controls preemption when scheduling.
v2:
(John H):
- Fix commit message
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-12-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:53 +0000 (14:50 -0700)]
drm/i915/guc: Extend deregistration fence to schedule disable
Extend the deregistration context fence to fence whne a GuC context has
scheduling disable pending.
v2:
(John H)
- Update comment why we check the pin count within spin lock
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-11-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:52 +0000 (14:50 -0700)]
drm/i915/guc: Disable engine barriers with GuC during unpin
Disable engine barriers for unpinning with GuC. This feature isn't
needed with the GuC as it disables context scheduling before unpinning
which guarantees the HW will not reference the context. Hence it is
not necessary to defer unpinning until a kernel context request
completes on each engine in the context engine mask.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-10-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:51 +0000 (14:50 -0700)]
drm/i915/guc: Defer context unpin until scheduling is disabled
With GuC scheduling, it isn't safe to unpin a context while scheduling
is enabled for that context as the GuC may touch some of the pinned
state (e.g. LRC). To ensure scheduling isn't enabled when an unpin is
done, a call back is added to intel_context_unpin when pin count == 1
to disable scheduling for that context. When the response CTB is
received it is safe to do the final unpin.
Future patches may add a heuristic / delay to schedule the disable
call back to avoid thrashing on schedule enable / disable.
v2:
(John H)
- s/drm_dbg/drm_err
(Daneiel)
- Clean up sched state function
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-9-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:50 +0000 (14:50 -0700)]
drm/i915/guc: Insert fence on context when deregistering
Sometimes during context pinning a context with the same guc_id is
registered with the GuC. In this a case deregister must be done before
the context can be registered. A fence is inserted on all requests while
the deregister is in flight. Once the G2H is received indicating the
deregistration is complete the context is registered and the fence is
released.
v2:
(John H)
- Fix commit message
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-8-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:49 +0000 (14:50 -0700)]
drm/i915/guc: Implement GuC context operations for new inteface
Implement GuC context operations which includes GuC specific operations
alloc, pin, unpin, and destroy.
v2:
(Daniel Vetter)
- Use msleep_interruptible rather than cond_resched in busy loop
(Michal)
- Remove C++ style comment
v3:
(Matthew Brost)
- Drop GUC_ID_START
(John Harrison)
- Fix a bunch of typos
- Use drm_err rather than drm_dbg for G2H errors
(Daniele)
- Fix ;; typo
- Clean up sched state functions
- Add lockdep for guc_id functions
- Don't call __release_guc_id when guc_id is invalid
- Use MISSING_CASE
- Add comment in guc_context_pin
- Use shorter path to rpm
(Daniele / CI)
- Don't call release_guc_id on an invalid guc_id in destroy
v4:
(Daniel Vetter)
- Add FIXME comment
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-7-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:48 +0000 (14:50 -0700)]
drm/i915/guc: Add bypass tasklet submission path to GuC
Add bypass tasklet submission path to GuC. The tasklet is only used if H2G
channel has backpresure.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-6-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:47 +0000 (14:50 -0700)]
drm/i915/guc: Implement GuC submission tasklet
Implement GuC submission tasklet for new interface. The new GuC
interface uses H2G to submit contexts to the GuC. Since H2G use a single
channel, a single tasklet is used for the submission path.
Also the per engine interrupt handler has been updated to disable the
rescheduling of the physical engine tasklet, when using GuC scheduling,
as the physical engine tasklet is no longer used.
In this patch the field, guc_id, has been added to intel_context and is
not assigned. Patches later in the series will assign this value.
v2:
(John Harrison)
- Clean up some comments
v3:
(John Harrison)
- More comment cleanups
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-5-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:46 +0000 (14:50 -0700)]
drm/i915/guc: Add LRC descriptor context lookup array
Add LRC descriptor context lookup array which can resolve the
intel_context from the LRC descriptor index. In addition to lookup, it
can determine if the LRC descriptor context is currently registered with
the GuC by checking if an entry for a descriptor index is present.
Future patches in the series will make use of this array.
v2:
(Michal)
- "linux/xarray.h" -> <linux/xarray.h>
- s/lrc/LRC
(John H)
- Fix commit message
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-4-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:45 +0000 (14:50 -0700)]
drm/i915/guc: Remove GuC stage descriptor, add LRC descriptor
Remove old GuC stage descriptor, add LRC descriptor which will be used
by the new GuC interface implemented in this patch series.
v2:
(John Harrison)
- s/lrc/LRC/g
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-3-matthew.brost@intel.com
Matthew Brost [Wed, 21 Jul 2021 21:50:44 +0000 (14:50 -0700)]
drm/i915/guc: Add new GuC interface defines and structures
Add new GuC interface defines and structures while maintaining old ones
in parallel.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-2-matthew.brost@intel.com
Prathap Kumar Valsan [Wed, 21 Jul 2021 22:30:34 +0000 (15:30 -0700)]
drm/i915/xehp: New engine context offsets
The layout of some engine contexts has changed on Xe_HP. Define the new
offsets.
Bspec: 45585, 46256
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-10-matthew.d.roper@intel.com
Stuart Summers [Wed, 21 Jul 2021 22:30:33 +0000 (15:30 -0700)]
drm/i915/xehp: Handle new device context ID format
Xe_HP changes the format of the context ID from past platforms.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-9-matthew.d.roper@intel.com
John Harrison [Wed, 21 Jul 2021 22:30:32 +0000 (15:30 -0700)]
drm/i915/selftests: Allow for larger engine counts
Increasing the engine count causes a couple of local array variables
to exceed the kernel stack limit. So make them dynamic allocations
instead.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-8-matthew.d.roper@intel.com
Venkata Sandeep Dhanalakota [Wed, 21 Jul 2021 22:30:31 +0000 (15:30 -0700)]
drm/i915/gen12: Use fuse info to enable SFC
In Gen12 there are various fuse combinations and in each configuration
vdbox engine may be connected to SFC depending on which engines are
available, so we need to set the SFC capability based on fuse value from
the hardware. Even numbered physical instance always have SFC, odd
numbered physical instances have SFC only if previous even instance is
fused off.
v2:
- Minor style & typo fixes (Tvrtko)
- Drop an unwanted 'inline' (Tvrtko)
Bspec: 48028
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-7-matthew.d.roper@intel.com
Matt Roper [Thu, 22 Jul 2021 16:35:16 +0000 (09:35 -0700)]
Merge branch 'topic/xehp-dg2-definitions-2021-07-21' into drm-intel-gt-next
As we begin applying XeHP and DG2 patches, the basic platform
definitions and macros (like IS_DG2()) will be needed in both
drm-intel-next and drm-intel-gt-next. Those initial definition patches
are applied to a topic branch and merged to both trees.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Matt Roper [Wed, 21 Jul 2021 22:30:28 +0000 (15:30 -0700)]
drm/i915/dg2: add DG2 platform info
DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics.
There are two variants (treated as subplatforms in the code): DG2-G10
and DG2-G11 that require independent programming in some areas (e.g.,
workarounds).
Bspec: 44472, 44474, 46197, 48028, 48077
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-4-matthew.d.roper@intel.com
Lucas De Marchi [Wed, 21 Jul 2021 22:30:27 +0000 (15:30 -0700)]
drm/i915/xehpsdv: add initial XeHP SDV definitions
XeHP SDV is a Intel® dGPU without display. This is just the definition
of some basic platform macros, by large a copy of current state of
Tigerlake which does not reflect the end state of this platform.
v2:
- Switch to intel_step infrastructure for stepping matches. (Jani)
v3:
- Bring earlier in patch series and leave addition of new media engines
to the engine mask for a later patch.
Bspec: 44467, 48077
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-3-matthew.d.roper@intel.com
Lucas De Marchi [Wed, 21 Jul 2021 22:30:26 +0000 (15:30 -0700)]
drm/i915: Add XE_HP initial definitions
Our _FEATURES macro went back to GEN7, extending each other, making it
difficult to grasp what was really enabled/disabled. Take the
opportunity of the GEN -> XE_HP name break and also break with the
feature inheritance.
For XE_HP this basically goes from GEN12 back to GEN7 coalescing the
features making sure the overrides remain, remove all the
display-specific features and sort it.
Then also remove the definitions that would be overridden by
DGFX_FEATURES and those that were 0 (since that is the default).
Exception here is has_master_unit_irq: although it is a feature that
started with DG1 and is true for all DGFX platforms, it's also true for
XE_HP in general.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-2-matthew.d.roper@intel.com
Lucas De Marchi [Wed, 7 Jul 2021 23:59:21 +0000 (16:59 -0700)]
drm/i915: Add release id version
Besides the arch version returned by GRAPHICS_VER(), new platforms
contain a "release id" to make clear the difference from one platform to
another.
The release id number is not formally defined by hardware until future
platforms that will expose it via a new GMD_ID register. For the
platforms we support before that register becomes available we will set
the values in software and we can set them as we please. So the plan is
to set them so we can group different features under a single
GRAPHICS_VER_FULL() check.
After GMD_ID is used, the usefulness of a "full version check" will be
greatly reduced and will be mostly used for deciding workarounds and a
few code paths. So it makes sense to keep it as a separate field from
graphics_ver. Also, as a platform with `release == n` may be closer
feature-wise to `n - 2` than to `n - 1`, use the word "release" rather
than the more common "minor" for this
This is a mix of 2 independent changes: one by me and the other by Matt
Roper.
v2:
- Reword commit message to make it clearer why we don't call it
"minor" (Matt Roper and Tvrtko)
- Rename variables s/*_ver_release/*_rel/ and print them in a single
line formatted as {ver}.{rel:2} (Jani and Matt Roper)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com
(cherry picked from commit
ca6374e267e2735fe382fe95de2a8a9c30c6bdb3)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Lucas De Marchi [Wed, 7 Jul 2021 23:59:20 +0000 (16:59 -0700)]
drm/i915: do not abbreviate version in debugfs
Brevity is not needed here, so just spell out "* version" in the string.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-1-lucas.demarchi@intel.com
(cherry picked from commit
0f9b145a0a0ab0d3d4143c20e2ca347d8a105e33)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Jason Ekstrand [Wed, 21 Jul 2021 15:23:58 +0000 (10:23 -0500)]
drm/i915: Make the kmem slab for i915_buddy_block a global
There's no reason that I can tell why this should be per-i915_buddy_mm
and doing so causes KMEM_CACHE to throw dmesg warnings because it tries
to create a debugfs entry with the name i915_buddy_block multiple times.
We could handle this by carefully giving each slab its own name but that
brings its own pain because then we have to store that string somewhere
and manage the lifetimes of the different slabs. The most likely
outcome would be a global atomic which we increment to get a new name or
something like that.
The much easier solution is to use the i915_globals system like we do
for every other slab in i915. This ensures that we have exactly one of
them for each i915 driver load and it gets neatly created on module load
and destroyed on module unload. Using the globals system also means
that its now tied into the shrink handler so we can properly respond to
low-memory situations.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes:
88be9a0a06b7 ("drm/i915/ttm: add ttm_buddy_man")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
[danvet: Rebase against removal of global shrink code]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-7-jason@jlekstrand.net
Jason Ekstrand [Wed, 21 Jul 2021 15:23:55 +0000 (10:23 -0500)]
drm/i915: Use a table for i915_init/exit (v2)
If the driver was not fully loaded, we may still have globals lying
around. If we don't tear those down in i915_exit(), we'll leak a bunch
of memory slabs. This can happen two ways: use_kms = false and if we've
run mock selftests. In either case, we have an early exit from
i915_init which happens after i915_globals_init() and we need to clean
up those globals.
The mock selftests case is especially sticky. The load isn't entirely
a no-op. We actually do quite a bit inside those selftests including
allocating a bunch of mock objects and running tests on them. Once all
those tests are complete, we exit early from i915_init(). Perviously,
i915_init() would return a non-zero error code on failure and a zero
error code on success. In the success case, we would get to i915_exit()
and check i915_pci_driver.driver.owner to detect if i915_init exited early
and do nothing. In the failure case, we would fail i915_init() but
there would be no opportunity to clean up globals.
The most annoying part is that you don't actually notice the failure as
part of the self-tests since leaking a bit of memory, while bad, doesn't
result in anything observable from userspace. Instead, the next time we
load the driver (usually for next IGT test), i915_globals_init() gets
invoked again, we go to allocate a bunch of new memory slabs, those
implicitly create debugfs entries, and debugfs warns that we're trying
to create directories and files that already exist. Since this all
happens as part of the next driver load, it shows up in the dmesg-warn
of whatever IGT test ran after the mock selftests.
While the obvious thing to do here might be to call i915_globals_exit()
after selftests, that's not actually safe. The dma-buf selftests call
i915_gem_prime_export which creates a file. We call dma_buf_put() on
the resulting dmabuf which calls fput() on the file. However, fput()
isn't immediate and gets flushed right before syscall returns. This
means that all the fput()s from the selftests don't happen until right
before the module load syscall used to fire off the selftests returns
which is after i915_init(). If we call i915_globals_exit() in
i915_init() after selftests, we end up freeing slabs out from under
objects which won't get released until fput() is flushed at the end of
the module load syscall.
The solution here is to let i915_init() return success early and detect
the early success in i915_exit() and only tear down globals and nothing
else. This way the module loads successfully, regardless of the success
or failure of the tests. Because we've not enumerated any PCI devices,
no device nodes are created and it's entirely useless from userspace.
The only thing the module does at that point is hold on to a bit of
memory until we unload it and i915_exit() is called. Importantly, this
means that everything from our selftests has the ability to properly
flush out between i915_init() and i915_exit() because there is at least
one syscall boundary in between.
In order to handle all the delicate init/exit cases, we convert the
whole thing to a table of init/exit pairs and track the init status in
the new init_progress global. This allows us to ensure that i915_exit()
always tears down exactly the things that i915_init() successfully
initialized. We also allow early-exit of i915_init() without failure by
an init function returning > 0. This is useful for nomodeset, and
selftests. For the mock selftests, we convert them to always return 1
so we get the desired behavior of the driver always succeeding to load
the driver and then properly tearing down the partially loaded driver.
v2 (Tvrtko Ursulin):
- Guard init_funcs[i].exit with GEM_BUG_ON(i >= ARRAY_SIZE(init_funcs))
v2 (Daniel Vetter):
- Update the docstring for i915.mock_selftests
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-4-jason@jlekstrand.net
Jason Ekstrand [Wed, 21 Jul 2021 15:23:54 +0000 (10:23 -0500)]
drm/i915: Call i915_globals_exit() if pci_register_device() fails
In the unlikely event that pci_register_device() fails, we were tearing
down our PMU setup but not globals. This leaves a bunch of memory slabs
lying around.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes:
32eb6bcfdda9 ("drm/i915: Make request allocation caches global")
[danvet: Fix conflicts against removal of the globals_flush
infrastructure.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-3-jason@jlekstrand.net
Jason Ekstrand [Wed, 21 Jul 2021 15:23:53 +0000 (10:23 -0500)]
drm/i915: Call i915_globals_exit() after i915_pmu_exit()
We should tear down in the opposite order we set up.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-2-jason@jlekstrand.net
Daniel Vetter [Wed, 21 Jul 2021 18:32:29 +0000 (20:32 +0200)]
drm/i915: Ditch i915 globals shrink infrastructure
This essentially reverts
commit
84a1074920523430f9dc30ff907f4801b4820072
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jan 24 11:36:08 2018 +0000
drm/i915: Shrink the GEM kmem_caches upon idling
mm/vmscan.c:do_shrink_slab() is a thing, if there's an issue with it
then we need to fix that there, not hand-roll our own slab shrinking
code in i915.
Also when this was added there was only one other caller of
kmem_cache_shrink (added 2005 to the acpi code). Now there's a 2nd one
outside of i915 code in a kunit test, which seems legit since that
wants to very carefully control what's in the kmem_cache. This out of
a total of over 500 calls to kmem_cache_create. This alone should have
been warning sign enough that we're doing something silly.
Noticed while reviewing a patch set from Jason to fix up some issues
in our i915_init() and i915_exit() module load/cleanup code. Now that
i915_globals.c isn't any different than normal init/exit functions, we
should convert them over to one unified table and remove
i915_globals.[hc] entirely.
v2: Improve commit message (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721183229.4136488-1-daniel.vetter@ffwll.ch
Matt Roper [Sat, 17 Jul 2021 05:14:26 +0000 (22:14 -0700)]
drm/i915: Make GT workaround upper bounds exclusive
Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround). This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.
Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does. This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code. If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.
We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds. But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.
[mattrope: Split out GT changes to apply through gt-next tree]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com
Matt Roper [Sat, 17 Jul 2021 05:14:22 +0000 (22:14 -0700)]
drm/i915: Program DFR enable/disable as a GT workaround
DFR programming (which we enable as an optimization on gen11, but must
ensure is disabled on gen12) should be handled as a GT workaround rather
than clock gating initialization. This will ensure that the programming
of these registers is verified with our typical workaround checks.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-4-matthew.d.roper@intel.com
Matt Roper [Sat, 17 Jul 2021 05:14:21 +0000 (22:14 -0700)]
drm/i915/icl: Drop a couple unnecessary workarounds
While doing a quick sanity check of the ICL workarounds in the driver I
noticed a few things that should be updated:
* There's no mention in the bspec that WaPipelineFlushCoherentLines
is needed on gen11 (both the current WA database and the old,
deprecated page 20196 were checked); it appears this might have just
been copied from the gen9 list? Even if this were needed, it doesn't
seem like this was the correct implementation anyway since the gen9
workaround is supposed to be implemented in the indirect context bb
(as we do in gen8_emit_flush_coherentl3_wa() on gen8/gen9).
* WaForwardProgressSoftReset does not appear in the current workaround
database. The old deprecated workaround list has a note indicating
the workaround was dropped in 2017, so we should be safe to drop it
from the code too.
While we're at it, add the formal workaround ID number to
WaDisableBankHangMode (our hardware team made a transition from
text-based workaround names to ID numbers partway through the
development of ICL, which is why some workarounds only have names, some
only have numbers, and some have both).
Bspec: 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-3-matthew.d.roper@intel.com
Matt Roper [Sat, 17 Jul 2021 05:14:20 +0000 (22:14 -0700)]
drm/i915: Fix application of WaInPlaceDecompressionHang
On SKL we've been applying this workaround on H0+ steppings, which is
actually backwards; H0 is supposed to be the first stepping where the
workaround is no longer needed. Flip the bounds so that the workaround
applies to all steppings _before_ H0.
On BXT we've been applying this workaround to all steppings, but the
bspec tells us it's only needed until C0. Pre-C0 GT steppings only
appeared in pre-production hardware, which we no longer support in the
driver, so we can drop the workaround completely for this platform.
On ICL we've been applying this workaround to all steppings, but there
doesn't seem to be any indication that this workaround was ever needed
for this platform (even now-deprecated page 20196 of the bspec doesn't
mention it). We can go ahead and drop it.
I also don't see any mention of this workaround being needed for KBL,
although this may be an oversight since the workaround is needed for all
steppings of CFL. I'll leave the workaround in place for KBL to be
safe.
Bspec: 14091, 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-2-matthew.d.roper@intel.com
Maarten Lankhorst [Wed, 14 Jul 2021 12:28:33 +0000 (14:28 +0200)]
drm/i915: Add TTM offset argument to mmap.
The FIXED mapping is only used for ttm, and tells userspace that the
mapping type is pre-defined. This disables the other type of mmap
offsets when discrete memory is used, so fix the selftests as well.
Document the struct as well, so it shows up in docbook.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mauld: Included minor fixes from the review comments]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714122833.766586-1-maarten.lankhorst@linux.intel.com
Jason Ekstrand [Tue, 20 Jul 2021 18:21:08 +0000 (13:21 -0500)]
drm/i915: Correct the docs for intel_engine_cmd_parser
In
93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous
cmdparser""), the parameters to intel_engine_cmd_parser() were altered
without updating the docs, causing Fi.CI.DOCS to start failing.
Fixes:
93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"")
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Added 'Fixes:' tag and corrected the hash for the ancestor]
Matthew Auld [Thu, 15 Jul 2021 10:15:34 +0000 (11:15 +0100)]
drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc
Add the missing kernel-doc.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-3-matthew.auld@intel.com
Matthew Auld [Thu, 15 Jul 2021 10:15:33 +0000 (11:15 +0100)]
drm/i915/uapi: reject caching ioctls for discrete
It's a noop on DG1, and in the future when need to support other devices
which let us control the coherency, then it should be an immutable
creation time property for the BO. This will likely be controlled
through a new gem_create_ext extension.
v2: add some kernel doc for the discrete changes, and document the
implicit rules
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-2-matthew.auld@intel.com
Jason Ekstrand [Wed, 14 Jul 2021 19:34:19 +0000 (14:34 -0500)]
Revert "drm/i915: Skip over MI_NOOP when parsing"
This reverts
a6c5e2aea704 ("drm/i915: Skip over MI_NOOP when parsing").
It complicates the batch parsing code a bit and increases indentation
for no reason other than fast-skipping a command that userspace uses
only rarely. Sure, there may be IGT tests that fill batches with NOOPs
but that's not a case we should optimize for in the kernel. We should
optimize for code clarity instead.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-6-jason@jlekstrand.net
Jason Ekstrand [Wed, 14 Jul 2021 19:34:18 +0000 (14:34 -0500)]
drm/i915: Drop error handling from dma_fence_work
Asynchronous command parsing was the only thing which ever returned a
non-zero error. With that gone, we can drop the error handling from
dma_fence_work.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-5-jason@jlekstrand.net
Jason Ekstrand [Wed, 14 Jul 2021 19:34:17 +0000 (14:34 -0500)]
drm/i915: Remove allow_alloc from i915_gem_object_get_sg*
This reverts the rest of
0edbb9ba1bfe ("drm/i915: Move cmd parser
pinning to execbuffer"). Now that the only user of i915_gem_object_get_sg
without allow_alloc has been removed, we can drop the parameter. This
portion of the revert was broken into its own patch to aid review.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-4-jason@jlekstrand.net
Jason Ekstrand [Wed, 14 Jul 2021 19:34:16 +0000 (14:34 -0500)]
Revert "drm/i915: Propagate errors on awaiting already signaled fences"
This reverts commit
9e31c1fe45d555a948ff66f1f0e3fe1f83ca63f7. Ever
since that commit, we've been having issues where a hang in one client
can propagate to another. In particular, a hang in an app can propagate
to the X server which causes the whole desktop to lock up.
Error propagation along fences sound like a good idea, but as your bug
shows, surprising consequences, since propagating errors across security
boundaries is not a good thing.
What we do have is track the hangs on the ctx, and report information to
userspace using RESET_STATS. That's how arb_robustness works. Also, if my
understanding is still correct, the EIO from execbuf is when your context
is banned (because not recoverable or too many hangs). And in all these
cases it's up to userspace to figure out what is all impacted and should
be reported to the application, that's not on the kernel to guess and
automatically propagate.
What's more, we're also building more features on top of ctx error
reporting with RESET_STATS ioctl: Encrypted buffers use the same, and the
userspace fence wait also relies on that mechanism. So it is the path
going forward for reporting gpu hangs and resets to userspace.
So all together that's why I think we should just bury this idea again as
not quite the direction we want to go to, hence why I think the revert is
the right option here.
For backporters: Please note that you _must_ have a backport of
https://lore.kernel.org/dri-devel/
20210602164149.391653-2-jason@jlekstrand.net/
for otherwise backporting just this patch opens up a security bug.
v2: Augment commit message. Also restore Jason's sob that I
accidentally lost.
v3: Add a note for backporters
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reported-by: Marcin Slusarz <marcin.slusarz@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Marcin Slusarz <marcin.slusarz@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3080
Fixes:
9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-3-jason@jlekstrand.net
Jason Ekstrand [Wed, 14 Jul 2021 19:34:15 +0000 (14:34 -0500)]
drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"
This reverts
686c7c35abc2 ("drm/i915/gem: Asynchronous cmdparser"). The
justification for this commit in the git history was a vague comment
about getting it out from under the struct_mutex. While this may
improve perf for some workloads on Gen7 platforms where we rely on the
command parser for features such as indirect rendering, no numbers were
provided to prove such an improvement. It claims to closed two
gitlab/bugzilla issues but with no explanation whatsoever as to why or
what bug it's fixing.
Meanwhile, by moving command parsing off to an async callback, it leaves
us with a problem of what to do on error. When things were synchronous,
EXECBUFFER2 would fail with an error code if parsing failed. When
moving it to async, we needed another way to handle that error and the
solution employed was to set an error on the dma_fence and then trust
that said error gets propagated to the client eventually. Moving back
to synchronous will help us untangle the fence error propagation mess.
This also reverts most of
0edbb9ba1bfe ("drm/i915: Move cmd parser
pinning to execbuffer") which is a refactor of some of our allocation
paths for asynchronous parsing. Now that everything is synchronous, we
don't need it.
v2 (Daniel Vetter):
- Add stabel Cc and Fixes tag
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: <stable@vger.kernel.org> # v5.6+
Fixes:
9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-2-jason@jlekstrand.net
Maarten Lankhorst [Fri, 9 Jul 2021 11:38:42 +0000 (13:38 +0200)]
drm/i915: Fix missing docbook chapters for i915 uapi.
I noticed when grepping for DOC: that those were defined
in the header, but not actually used. Fix it by removing
all chapters and the internal annotation, so the docbook
generated chapters are used.
This reverts the changes to driver-uapi.rst by the referenced commit
577729533cdc ("drm/i915: Document the Virtual Engine uAPI")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715120842.806605-1-maarten.lankhorst@linux.intel.com
Fixes:
577729533cdc ("drm/i915: Document the Virtual Engine uAPI")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Matt Roper [Thu, 15 Jul 2021 00:54:25 +0000 (17:54 -0700)]
Merge branch 'topic/revid_steppings' into drm-intel-gt-next
The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards). To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Matt Roper [Tue, 13 Jul 2021 19:36:35 +0000 (12:36 -0700)]
drm/i915/icl: Drop workarounds that only apply to pre-production steppings
We're past the point at which we usually drop workarounds that were
never needed on production hardware. The driver will already print an
error and apply taint if loaded on pre-production hardware.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-13-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:34 +0000 (12:36 -0700)]
drm/i915/cnl: Drop all workarounds
All of the Cannon Lake hardware that came out had graphics fused off,
and our userspace drivers have already dropped their support for the
platform; CNL-specific code in i915 that isn't inherited by subsequent
platforms is effectively dead code. Let's remove all of the
CNL-specific workarounds as a quick and easy first step.
References: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6899
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-12-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:33 +0000 (12:36 -0700)]
drm/i915/dg1: Use revid->stepping tables
Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.
This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.
v2:
- Use COMMON_STEP() macro in table. (Anusha)
Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:32 +0000 (12:36 -0700)]
drm/i915/rkl: Use revid->stepping tables
Switch RKL to use a revid->stepping table as we're trying to do on all
platforms going forward.
Bspec: 44501
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-10-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:31 +0000 (12:36 -0700)]
drm/i915/jsl_ehl: Use revid->stepping tables
Switch JSL/EHL to use a revid->stepping table as we're trying to do on
all platforms going forward.
v2:
- Use COMMON_STEP(). (Anusha)
Bspec: 29153
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:30 +0000 (12:36 -0700)]
drm/i915/icl: Use revid->stepping tables
Switch ICL to use a revid->stepping table as we're trying to do on all
platforms going forward. While we're at it, let's include some
additional steppings that have popped up, even if we don't yet have any
workarounds tied to those steppings (we probably need to audit our
workaround list soon to see if any of the bounds have moved or if new
workarounds have appeared).
Note that the current bspec table is missing information about how to
map PCI revision ID to GT/display steppings; it only provides an SoC
stepping. The mapping to GT/display steppings (which aren't always the
same as the SoC stepping) used to be in the bspec, but was apparently
dropped during an update in Nov 2019; I've made my changes here based on
an older bspec snapshot that still had the necessary information. We've
requested that the missing information be restored.
I'm only including the production revids in the table here since we're
past the point at which we usually stop trying to support pre-production
hardware. An appropriate check is added to
intel_detect_preproduction_hw() to print an error and taint the kernel
just in case someone still tries to load the driver on old
pre-production hardware.
v2:
- Drop pre-production steppings and add error/taint at startup when
loading on pre-production hardware.
Bspec: 21141 # pre-Nov 2019 snapshot
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:29 +0000 (12:36 -0700)]
drm/i915/glk: Use revid->stepping tables
Switch GLK to use a revid->stepping table as we're trying to do on all
platforms going forward. Pre-production and placeholder revisions are
omitted.
Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.
Bspec: 19131
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-7-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:28 +0000 (12:36 -0700)]
drm/i915/bxt: Use revid->stepping tables
Switch BXT to use a revid->stepping table as we're trying to do on all
platforms going forward. Note that the REVID macros we had before
weren't being used anywhere in the code and weren't even correct; the
table values come from the bspec (and omits all the placeholder and
preproduction revisions).
Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.
Bspec: 13620
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-6-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:27 +0000 (12:36 -0700)]
drm/i915/kbl: Drop pre-production revision from stepping table
We're long past the point where we need to care about pre-production
hardware, and we already warn the user and taint the kernel if we detect
the driver is being loaded on pre-production hardware.
Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-5-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:26 +0000 (12:36 -0700)]
drm/i915/skl: Use revid->stepping tables
Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward. Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.
Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1). Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.
v2:
- Since GT and display steppings are always identical on SKL use a
macro to set both values at once in a more readable manner. (Anusha)
- Drop preproduction steppings.
Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com
Matt Roper [Tue, 13 Jul 2021 19:36:25 +0000 (12:36 -0700)]
drm/i915: Make pre-production detection use direct revid comparison
Although we're converting our workarounds to use a revid->stepping
lookup table, the function that detects pre-production hardware should
continue to compare against PCI revision ID values directly. These are
listed in the bspec as integers, so it's easier to confirm their
correctness if we just use an integer literal rather than a symbolic
name anyway.
Bspec: 13620, 19131, 13626, 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-3-matthew.d.roper@intel.com
Anusha Srivatsa [Tue, 13 Jul 2021 19:36:24 +0000 (12:36 -0700)]
drm/i915/step: s/<platform>_revid_tbl/<platform>_revids
Simplify the stepping info array name.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-2-matthew.d.roper@intel.com
Matthew Auld [Tue, 13 Jul 2021 13:04:31 +0000 (14:04 +0100)]
drm/i915/gtt: drop the page table optimisation
We skip filling out the pt with scratch entries if the va range covers
the entire pt, since we later have to fill it with the PTEs for the
object pages anyway. However this might leave open a small window where
the PTEs don't point to anything valid for the HW to consume.
When for example using 2M GTT pages this fill_px() showed up as being
quite significant in perf measurements, and ends up being completely
wasted since we ignore the pt and just use the pde directly.
Anyway, currently we have our PTE construction split between alloc and
insert, which is probably slightly iffy nowadays, since the alloc
doesn't actually allocate anything anymore, instead it just sets up the
page directories and points the PTEs at the scratch page. Later when we
do the insert step we re-program the PTEs again. Better might be to
squash the alloc and insert into a single step, then bringing back this
optimisation(along with some others) should be possible.
Fixes:
14826673247e ("drm/i915: Only initialize partially filled pagetables")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713130431.2392740-1-matthew.auld@intel.com
Matthew Auld [Mon, 5 Jul 2021 13:53:09 +0000 (14:53 +0100)]
drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc
Convert all the drm_i915_gem_set_domain bits to proper kernel doc.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-4-matthew.auld@intel.com
Matthew Auld [Mon, 5 Jul 2021 13:53:07 +0000 (14:53 +0100)]
drm/i915/uapi: convert drm_i915_gem_caching to kernel doc
Convert all the drm_i915_gem_caching bits to proper kernel doc.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-2-matthew.auld@intel.com
John Harrison [Thu, 8 Jul 2021 16:20:55 +0000 (09:20 -0700)]
drm/i915/guc: Module load failure test for CT buffer creation
Add several module failure load inject points in the CT buffer creation
code path.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-8-matthew.brost@intel.com
Matthew Brost [Thu, 8 Jul 2021 16:20:54 +0000 (09:20 -0700)]
drm/i915/guc: Optimize CTB writes and reads
CTB writes are now in the path of command submission and should be
optimized for performance. Rather than reading CTB descriptor values
(e.g. head, tail) which could result in accesses across the PCIe bus,
store shadow local copies and only read/write the descriptor values when
absolutely necessary. Also store the current space in the each channel
locally.
v2:
(Michal)
- Add additional sanity checks for head / tail pointers
- Use GUC_CTB_HDR_LEN rather than magic 1
v3:
(Michal / John H)
- Drop redundant check of head value
v4:
(John H)
- Drop redundant checks of tail / head values
v5:
(Michal)
- Address more nits
v6:
(Michal)
- Add GEM_BUG_ON sanity check on ctb->space
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-7-matthew.brost@intel.com
Matthew Brost [Thu, 8 Jul 2021 16:20:53 +0000 (09:20 -0700)]
drm/i915/guc: Add stall timer to non blocking CTB send function
Implement a stall timer which fails H2G CTBs once a period of time
with no forward progress is reached to prevent deadlock.
v2:
(Michal)
- Improve error message in ct_deadlock()
- Set broken when ct_deadlock() returns true
- Return -EPIPE on ct_deadlock()
v3:
(Michal)
- Add ms to stall timer comment
(Matthew)
- Move broken check to intel_guc_ct_send()
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-6-matthew.brost@intel.com
Matthew Brost [Thu, 8 Jul 2021 16:20:52 +0000 (09:20 -0700)]
drm/i915/guc: Add non blocking CTB send function
Add non blocking CTB send function, intel_guc_send_nb. GuC submission
will send CTBs in the critical path and does not need to wait for these
CTBs to complete before moving on, hence the need for this new function.
The non-blocking CTB now must have a flow control mechanism to ensure
the buffer isn't overrun. A lazy spin wait is used as we believe the
flow control condition should be rare with a properly sized buffer.
The function, intel_guc_send_nb, is exported in this patch but unused.
Several patches later in the series make use of this function.
v2:
(Michal)
- Use define for H2G room calculations
- Move INTEL_GUC_SEND_NB define
(Daniel Vetter)
- Use msleep_interruptible rather than cond_resched
v3:
(Michal)
- Move includes to following patch
- s/INTEL_GUC_SEND_NB/INTEL_GUC_CT_SEND_NB/g
v4:
(John H)
- Update comment, add type local variable
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-5-matthew.brost@intel.com
Matthew Brost [Thu, 8 Jul 2021 16:20:51 +0000 (09:20 -0700)]
drm/i915/guc: Increase size of CTB buffers
With the introduction of non-blocking CTBs more than one CTB can be in
flight at a time. Increasing the size of the CTBs should reduce how
often software hits the case where no space is available in the CTB
buffer.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-4-matthew.brost@intel.com
Matthew Brost [Thu, 8 Jul 2021 16:20:50 +0000 (09:20 -0700)]
drm/i915/guc: Improve error message for unsolicited CT response
Improve the error message when a unsolicited CT response is received by
printing fence that couldn't be found, the last fence, and all requests
with a response outstanding.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-3-matthew.brost@intel.com
Matthew Brost [Thu, 8 Jul 2021 16:20:49 +0000 (09:20 -0700)]
drm/i915/guc: Relax CTB response timeout
In upcoming patch we will allow more CTB requests to be sent in
parallel to the GuC for processing, so we shouldn't assume any more
that GuC will always reply without 10ms.
Use bigger value hardcoded value of 1s instead.
v2: Add CONFIG_DRM_I915_GUC_CTB_TIMEOUT config option
v3:
(Daniel Vetter)
- Use hardcoded value of 1s rather than config option
v4:
(Michal)
- Use defines for timeout values
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-2-matthew.brost@intel.com
Rodrigo Vivi [Tue, 13 Jul 2021 19:52:51 +0000 (15:52 -0400)]
Merge drm/drm-next into drm-intel-gt-next
Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"
Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
José Roberto de Souza [Tue, 13 Jul 2021 00:38:52 +0000 (17:38 -0700)]
drm/i915/adl_s: Extend Wa_1406941453
BSpec: 54370
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-4-jose.souza@intel.com
José Roberto de Souza [Tue, 13 Jul 2021 00:38:51 +0000 (17:38 -0700)]
drm/i915: Implement Wa_1508744258
Same bit was required for Wa_14012131227 in DG1 now it is also
required as Wa_1508744258 to TGL, RKL, DG1, ADL-S and ADL-P.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-3-jose.souza@intel.com
José Roberto de Souza [Tue, 13 Jul 2021 00:38:50 +0000 (17:38 -0700)]
drm/i915: Settle on "adl-x" in WA comments
Most of the places are using this format so lets consolidate it.
v2:
- split patch in two: display and non-display because of conflicts
between drm-intel-gt-next x drm-intel-next
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-2-jose.souza@intel.com
Linus Torvalds [Sun, 11 Jul 2021 22:07:40 +0000 (15:07 -0700)]
Linux 5.14-rc1
Hugh Dickins [Wed, 7 Jul 2021 20:13:33 +0000 (13:13 -0700)]
mm/rmap: try_to_migrate() skip zone_device !device_private
I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:11:24 +0000 (13:11 -0700)]
mm/rmap: fix new bug: premature return from page_mlock_one()
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.
Fixes:
cd62734ca60d ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:08:53 +0000 (13:08 -0700)]
mm/rmap: fix old bug: munlocking THP missed other mlocks
The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.
It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped. Refine the tests.
There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.
(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)
Fixes:
9a73f61bdb8a ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 7 Jul 2021 20:06:17 +0000 (13:06 -0700)]
mm/rmap: fix comments left over from recent changes
Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.
TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Jul 2021 18:17:57 +0000 (11:17 -0700)]
Merge tag 'irq-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
Linus Torvalds [Sun, 11 Jul 2021 18:13:57 +0000 (11:13 -0700)]
Merge tag 'sched-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Three fixes:
- Fix load tracking bug/inconsistency
- Fix a sporadic CFS bandwidth constraints enforcement bug
- Fix a uclamp utilization tracking bug for newly woken tasks"
* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Ignore max aggregation if rq is idle
sched/fair: Fix CFS bandwidth hrtimer expiry type
sched/fair: Sync load_sum with load_avg after dequeue
Linus Torvalds [Sun, 11 Jul 2021 18:10:48 +0000 (11:10 -0700)]
Merge tag 'perf-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A fix and a hardware-enablement addition:
- Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup
- Add cstate event support for Intel ICELAKE_X and ICELAKE_D"
* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Clean up error handling path of iio mapping
perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
Linus Torvalds [Sun, 11 Jul 2021 18:06:09 +0000 (11:06 -0700)]
Merge tag 'locking-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
- Fix a Sparc crash
- Fix a number of objtool warnings
- Fix /proc/lockdep output on certain configs
- Restore a kprobes fail-safe
* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: sparc: Fix arch_cmpxchg64_local()
kprobe/static_call: Restore missing static_call_text_reserved()
static_call: Fix static_call_text_reserved() vs __init
jump_label: Fix jump_label_text_reserved() vs __init
locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
Linus Torvalds [Sun, 11 Jul 2021 17:59:53 +0000 (10:59 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
Linus Torvalds [Sun, 11 Jul 2021 17:54:24 +0000 (10:54 -0700)]
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git./linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"
* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...
Ville Syrjälä [Wed, 30 Jun 2021 16:44:13 +0000 (19:44 +0300)]
drm/i915/gt: Fix -EDEADLK handling regression
The conversion to ww mutexes failed to address the fence code which
already returns -EDEADLK when we run out of fences. Ww mutexes on
the other hand treat -EDEADLK as an internal errno value indicating
a need to restart the operation due to a deadlock. So now when the
fence code returns -EDEADLK the higher level code erroneously
restarts everything instead of returning the error to userspace
as is expected.
To remedy this let's switch the fence code to use a different errno
value for this. -ENOBUFS seems like a semi-reasonable unique choice.
Apart from igt the only user of this I could find is sna, and even
there all we do is dump the current fence registers from debugfs
into the X server log. So no user visible functionality is affected.
If we really cared about preserving this we could of course convert
back to -EDEADLK higher up, but doesn't seem like that's worth
the hassle here.
Not quite sure which commit specifically broke this, but I'll
just attribute it to the general gem ww mutex work.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Testcase: igt/gem_pread/exhaustion
Testcase: igt/gem_pwrite/basic-exhaustion
Testcase: igt/gem_fenced_exec_thrash/too-many-fences
Fixes:
80f0b679d6f0 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630164413.25481-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Linus Torvalds [Sat, 10 Jul 2021 23:19:10 +0000 (16:19 -0700)]
Merge tag 'rtc-5.14' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Mostly documentation/comment changes and non urgent fixes.
- add or fix SPDX identifiers
- NXP pcf*: fix datasheet URLs
- imxdi: add wakeup support
- pcf2127: handle timestamp interrupts, this fixes a possible
interrupt storm
-
bd70528: Drop
BD70528 support"
* tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: pcf8523: rename register and bit defines
rtc: pcf2127: handle timestamp interrupts
rtc: at91sam9: Remove unnecessary offset variable checks
rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
rtc: spear: convert to SPDX identifier
rtc: tps6586x: convert to SPDX identifier
rtc: tps80031: convert to SPDX identifier
rtc: rtd119x: Fix format of SPDX identifier
rtc: sc27xx: Fix format of SPDX identifier
rtc: palmas: convert to SPDX identifier
rtc: max6900: convert to SPDX identifier
rtc: ds1374: convert to SPDX identifier
rtc: au1xxx: convert to SPDX identifier
rtc: pcf85063: Update the PCF85063A datasheet revision
dt-bindings: rtc: ti,bq32k: take maintainership
rtc: pcf8563: Fix the datasheet URL
rtc: pcf85063: Fix the datasheet URL
rtc: pcf2127: Fix the datasheet URL
dt-bindings: rtc: ti,bq32k: Convert to json-schema
dt-bindings: rtc: rx8900: Convert to YAML schema
...
Mel Gorman [Mon, 5 Jul 2021 09:51:17 +0000 (10:51 +0100)]
mm/page_alloc: Revert pahole zero-sized workaround
Commit
dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.
A superior workaround is achieved with commit
a0b8200d06ad ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").
This patch reverts the dummy field and the pahole version check.
Fixes:
dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Belloni [Sat, 10 Jul 2021 21:14:31 +0000 (23:14 +0200)]
rtc: pcf8523: rename register and bit defines
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.
Fixes:
7fd70c65faac ("ARM: irqstat: Get rid of duplicated declaration")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com
Linus Torvalds [Sat, 10 Jul 2021 19:04:58 +0000 (12:04 -0700)]
Merge tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"13 cifs/smb3 fixes. Most are to address minor issues pointed out by
Coverity.
Also includes a packet signing enhancement and mount improvement"
* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: prevent NULL deref in cifs_compose_mount_options()
SMB3.1.1: Add support for negotiating signing algorithm
cifs: use helpers when parsing uid/gid mount options and validate them
CIFS: Clarify SMB1 code for POSIX Lock
CIFS: Clarify SMB1 code for rename open file
CIFS: Clarify SMB1 code for delete
CIFS: Clarify SMB1 code for SetFileSize
smb3: fix typo in header file
CIFS: Clarify SMB1 code for UnixSetPathInfo
CIFS: Clarify SMB1 code for UnixCreateSymLink
cifs: clarify SMB1 code for UnixCreateHardLink
cifs: make locking consistent around the server session status
Linus Torvalds [Sat, 10 Jul 2021 18:57:57 +0000 (11:57 -0700)]
Merge tag 'pci-v5.14-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
broke ppc:sam460ex (Bjorn Helgaas)"
* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Coalesce host bridge contiguous apertures"
Linus Torvalds [Sat, 10 Jul 2021 18:53:06 +0000 (11:53 -0700)]
Merge tag 'i3c/for-5.14' of git://git./linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- two small fixes to the svc driver
* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix doc warning in svc-i3c-master.c
i3c: master: svc: drop free_irq of devm_request_irq allocated irq
Linus Torvalds [Sat, 10 Jul 2021 18:43:25 +0000 (11:43 -0700)]
Merge tag 'thermal-v5.14-rc1' of git://git./linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add rk3568 sensor support (Finley Xiao)
- Add missing MODULE_DEVICE_TABLE for the Spreadtrum sensor (Chunyan
Zhang)
- Export additionnal attributes for the int340x thermal processor
(Srinivas Pandruvada)
- Add SC7280 compatible for the tsens driver (Rajeshwari Ravindra
Kamble)
- Fix kernel documentation for thermal_zone_device_unregister() and use
devm_platform_get_and_ioremap_resource() (Yang Yingliang)
- Fix coefficient calculations for the rcar_gen3 sensor driver (Niklas
Söderlund)
- Fix shadowing variable rcar_gen3_ths_tj_1 (Geert Uytterhoeven)
- Add missing of_node_put() for the iMX and Spreadtrum sensors
(Krzysztof Kozlowski)
- Add tegra3 thermal sensor DT bindings (Dmitry Osipenko)
- Stop the thermal zone monitoring when unregistering it to prevent a
temperature update without the 'get_temp' callback (Dmitry Osipenko)
- Add rk3568 DT bindings, convert bindings to yaml schemas and add the
corresponding compatible in the Rockchip sensor (Ezequiel Garcia)
- Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)
- Use the find_first_zero_bit() function instead of custom code (Andy
Shevchenko)
- Fix the kernel doc for the device cooling device (Yang Li)
- Reorg the processor thermal int340x to set the scene for the PCI mmio
driver (Srinivas Pandruvada)
- Add PCI MMIO driver for the int340x processor thermal driver
(Srinivas Pandruvada)
- Add hwmon sensors for the mediatek sensor (Frank Wunderlich)
- Fix warning for return value reported by Smatch for the int340x
thermal processor (Srinivas Pandruvada)
- Fix wrong register access and decoding for the int340x thermal
processor (Srinivas Pandruvada)
* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
thermal/drivers/int340x/processor_thermal: Fix tcc setting
thermal/drivers/int340x/processor_thermal: Fix warning for return value
thermal/drivers/mediatek: Add sensors-support
thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
thermal: devfreq_cooling: Fix kernel-doc
thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
dt-bindings: thermal: tsens: Add sc8180x compatible
dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
dt-bindings: thermal: convert rockchip-thermal to json-schema
thermal/core/thermal_of: Stop zone device before unregistering it
dt-bindings: thermal: Add binding for Tegra30 thermal sensor
thermal/drivers/sprd: Add missing of_node_put for loop iteration
thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
thermal/core: Correct function name thermal_zone_device_unregister()
dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
thermal/drivers/int340x: processor_thermal: Export additional attributes
...
Linus Torvalds [Sat, 10 Jul 2021 18:01:38 +0000 (11:01 -0700)]
Merge tag 'kbuild-v5.14' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
Linus Torvalds [Sat, 10 Jul 2021 17:46:14 +0000 (10:46 -0700)]
Merge tag 's390-5.14-2' of git://git./linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix preempt_count initialization.
- Rework call_on_stack() macro to add proper type handling and avoid
possible register corruption.
- More error prone "register asm" removal and fixes.
- Fix syscall restarting when multiple signals are coming in. This adds
minimalistic trampolines to vdso so we can return from signal without
using the stack which requires pgm check handler hacks when NX is
enabled.
- Remove HAVE_IRQ_EXIT_ON_IRQ_STACK since this is no longer true after
switch to generic entry.
- Fix protected virtualization secure storage access exception
handling.
- Make machine check C handler always enter with DAT enabled and move
register validation to C code.
- Fix tinyconfig boot problem by avoiding MONITOR CALL without
CONFIG_BUG.
- Increase asm symbols alignment to 16 to make it consistent with
compilers.
- Enable concurrent access to the CPU Measurement Counter Facility.
- Add support for dynamic AP bus size limit and rework ap_dqap to deal
with messages greater than recv buffer.
* tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390: preempt: Fix preempt_count initialization
s390/linkage: increase asm symbols alignment to 16
s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
s390: add type checking to CALL_ON_STACK_NORETURN() macro
s390: remove old CALL_ON_STACK() macro
s390/softirq: use call_on_stack() macro
s390/lib: use call_on_stack() macro
s390/smp: use call_on_stack() macro
s390/kexec: use call_on_stack() macro
s390/irq: use call_on_stack() macro
s390/mm: use call_on_stack() macro
s390: introduce proper type handling call_on_stack() macro
s390/irq: simplify on_async_stack()
s390/irq: inline do_softirq_own_stack()
s390/irq: simplify do_softirq_own_stack()
s390/ap: get rid of register asm in ap_dqap()
s390: rename PIF_SYSCALL_RESTART to PIF_EXECVE_PGSTE_RESTART
s390: move restart of execve() syscall
s390/signal: remove sigreturn on stack
s390/signal: switch to using vdso for sigreturn and syscall restart
...
Linus Torvalds [Sat, 10 Jul 2021 17:36:33 +0000 (10:36 -0700)]
Merge tag 'mips_5.14_1' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for accesing gic via vdso
- two build fixes
* tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vdso: Invalid GIC access through VDSO
mips: disable branch profiling in boot/decompress.o
mips: always link byteswap helpers into decompressor
Linus Torvalds [Sat, 10 Jul 2021 17:29:35 +0000 (10:29 -0700)]
Merge tag 'arm-defconfig-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM defconfig updates from "Olof Johansson
"A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out.
These changes are almost exclusively turning on new drivers for
various platforms, or turning on modules for new drivers for the
shared generic configs"
* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
arm64: defconfig: Enable renesas usb xhci pci host controller
arm64: defconfig: Visconti: Enable GPIO
arm64: defconfig: Visconti: Enable PWM
arm64: defconfig: add drivers needed for DragonBoard410c
ARM: config: aspeed: Add DEBUG_FS and EXT4
ARM: ixp4xx_defconfig: add MTD_PHYSMAP
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
ARM: exynos_defconfig: restore framebuffer support
arm64: defconfig: Enable ARCH_R9A07G044
ARM: configs: at91_dt_defconfig: configs for sam9x60
arm64: defconfig: Enable Exynos UFS driver
arm64: defconfig: qcom: enable interconnect for SM8350
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
arm64: defconfig: enable Layerscape EDAC driver
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
ARM: shmobile: defconfig: Refresh for v5.13-rc1
arm64: defconfig: Allow Mediatek boards to boot from the mmc
...
Linus Torvalds [Sat, 10 Jul 2021 16:46:20 +0000 (09:46 -0700)]
Merge tag 'arm-drivers-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Linus Torvalds [Sat, 10 Jul 2021 16:33:54 +0000 (09:33 -0700)]
Merge tag 'arm-dt-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM devicetree updates from Olof Johansson:
"Like always, the DT branch is sizable. There are numerous additions
and fixes to existing platforms, but also a handful of new ones
introduced. Less than some other releases, but there's been
significant work on cleanups, refactorings and device enabling on
existing platforms.
A non-exhaustive list of new material:
- Refactoring of BCM2711 dtsi structure to add support for the
Raspberry Pi 400
- Rockchip: RK3568 SoC and EVB, video codecs for
rk3036/3066/3188/322x
- Qualcomm: SA8155p Automotive platform (SM8150 derivative),
SM8150/8250 enhancements and support for Sony Xperia 1/1II and
5/5II
- TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
definitions
- TI OMAP: Various cleanups
- Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194
- Qualcomm: lots of additions for peripherals across several SoCs,
and new support for Microsoft Surface Duo (SM8150-based), Huawei
Ascend G7.
- i.MX: Numerous additions of features across SoCs and boards.
- Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
NanoPi R1S H5 boards
- MediaTek: More device bindings for mt8167, new Chromebook system
variants for mt8183
- Renesas: RZ/G2L SoC and EVK added
- Amlogic: BananaPi BPI-M5 board added"
* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
...
Linus Torvalds [Sat, 10 Jul 2021 16:22:44 +0000 (09:22 -0700)]
Merge tag 'arm-soc-5.14' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
Linus Torvalds [Sat, 10 Jul 2021 16:17:13 +0000 (09:17 -0700)]
Merge tag 'fixes-2021-07-09' of git://git./linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"This is a fix for the rework of ARM's pfn_valid() implementation
merged during this merge window.
Don't abuse pfn_valid() to check if pfn is in RAM
The semantics of pfn_valid() is to check presence of the memory map
for a PFN and not whether a PFN is in RAM. The memory map may be
present for a hole in the physical memory and if such hole corresponds
to an MMIO range, __arm_ioremap_pfn_caller() will produce a WARN() and
fail.
Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN
is in RAM or not"
* tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM
Linus Torvalds [Sat, 10 Jul 2021 16:06:41 +0000 (09:06 -0700)]
Merge branch 'for-5.14-fixes' of git://git./linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This is just a single change to fix percpu depopulation. The code
relied on depopulation code written specifically for the free path and
relied on vmalloc to do the tlb flush lazily. As we're modifying the
backing pages during the lifetime of a chunk, we need to also flush
the tlb accordingly.
Guenter Roeck reported this issue in [1] on mips. I believe we just
happen to be lucky given the much larger chunk sizes on x86 and
consequently less churning of this memory"
Link: https://lore.kernel.org/lkml/20210702191140.GA3166599@roeck-us.net/
* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: flush tlb in pcpu_reclaim_populated()
Mian Yousaf Kaukab [Tue, 29 Jun 2021 15:06:43 +0000 (17:06 +0200)]
rtc: pcf2127: handle timestamp interrupts
commit
03623b4b041c ("rtc: pcf2127: add tamper detection support")
added support for timestamp interrupts. However they are not being
handled in the irq handler. If a timestamp interrupt occurs it
results in kernel disabling the interrupt and displaying the call
trace:
[ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option)
...
[ 121.238087] [<
00000000c4d69393>] irq_default_primary_handler threaded [<
000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127]
[ 121.248971] Disabling IRQ #78
Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp
before clearing TSF1 and TSF2 flags so that it can't be overwritten.
Set a flag to mark if the timestamp is valid and only report to sysfs
if the flag is set. To mimic the hardware behavior, don’t save
another timestamp until the first one has been read by the userspace.
However, if the alarm irq is not configured, keep the old way of
handling timestamp interrupt in the timestamp0 sysfs calls.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
Nobuhiro Iwamatsu [Thu, 8 Jul 2021 05:13:40 +0000 (14:13 +0900)]
rtc: at91sam9: Remove unnecessary offset variable checks
The offset variable is checked by at91_rtc_readalarm(), but this check
is unnecessary because the previous check knew that the value of this
variable was not 0.
This removes that unnecessary offset variable checks.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210708051340.341345-1-nobuhiro1.iwamatsu@toshiba.co.jp
Nobuhiro Iwamatsu [Thu, 8 Jul 2021 05:13:04 +0000 (14:13 +0900)]
rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return
value, but doesn't use it.
This modifies using the s5m_check_peding_alarm_interrupt()"s return value
as the s5m_rtc_read_alarm()'s return value.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210708051304.341278-1-nobuhiro1.iwamatsu@toshiba.co.jp