OSDN Git Service
Brandon Casey [Thu, 21 Aug 2008 00:34:30 +0000 (19:34 -0500)]
revision.h: make show_early_output an extern which is defined in revision.c
The variable show_early_output is defined in revision.c and should be
declared extern in revision.h so that the linker does not complain
about multiply defined variables.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Aug 2008 22:19:00 +0000 (15:19 -0700)]
Update draft release notes for 1.6.0.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tarmigan Casebolt [Tue, 19 Aug 2008 19:50:31 +0000 (12:50 -0700)]
Add hints to revert documentation about other ways to undo changes
Based on its name, people may read the 'git revert' documentation when
they want to undo local changes, especially people who have used other
SCM's. 'git revert' may not be what they had in mind, but git
provides several other ways to undo changes to files. We can help
them by pointing them towards the git commands that do what they might
want to do.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Cc: Lea Wiemann <lewiemann@gmail.com>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Wed, 20 Aug 2008 15:36:25 +0000 (17:36 +0200)]
Install templates with the user and group of the installing personality
If 'make install' was run with sufficient privileges, then the installed
templates, which are copied using 'tar', would receive the user and group
of whoever built git. This instructs 'tar' to ignore the user and group
that are recorded in the archive.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Aug 2008 22:09:28 +0000 (15:09 -0700)]
"git-merge": allow fast-forwarding in a stat-dirty tree
We used to refresh the index to clear stat-dirtyness before a fast-forward
merge. Recent C rewrite forgot to do this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Aug 2008 21:13:42 +0000 (14:13 -0700)]
completion: find out supported merge strategies correctly
"git-merge" is a binary executable these days, and looking for assignment
to $all_strategies variable with grep/sed does not work well.
When asked for an unknown strategy, pre-1.6.0 and post-1.6.0 "git merge"
commands respectively say:
$ $HOME/git-snap-v1.5.6.5/bin/git merge -s help
available strategies are: recur recursive octopus resolve stupid ours subtree
$ $HOME/git-snap-v1.6.0/bin/git merge -s help
Could not find merge strategy 'help'.
Available strategies are: recursive octopus resolve ours subtree.
both on their standard error stream. We can use this to learn what
strategies are supported.
The sed script is written in such a way that it catches both old and new
message styles ("Available" vs "available", and the full stop at the end).
It also allows future versions of "git merge" to line-wrap the list of
strategies, and add extra comments, like this:
$ $HOME/git-snap-v1.6.1/bin/git merge -s help
Could not find merge strategy 'help'.
Available strategies are: blame recursive octopus resolve ours
subtree.
Also you have custom strategies: theirs
Make sure you spell strategy names correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 20 Aug 2008 17:55:33 +0000 (13:55 -0400)]
decorate: allow const objects to be decorated
We don't actually modify the struct object, so there is no
reason not to accept const versions (and this allows other
callsites, like the next patch, to use the decoration
machinery).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Aug 2008 19:29:27 +0000 (12:29 -0700)]
for-each-ref: cope with tags with incomplete lines
If you have a tag with a single, incomplete line as its payload, asking
git-for-each-ref for its %(body) element accessed a NULL pointer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Aug 2008 18:47:55 +0000 (11:47 -0700)]
diff --check: do not get confused by new blank lines in the middle
The code remembered that the last diff output it saw was an empty line,
and tried to reset that state whenever it sees a context line, a non-blank
new line, or a new hunk. However, this codepath asks the underlying diff
engine to feed diff without any context, and the "just saw an empty line"
state was not reset if you added a new blank line in the last hunk of your
patch, even if it is not the last line of the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Tue, 19 Aug 2008 18:46:30 +0000 (20:46 +0200)]
remote.c: remove useless if-before-free test
We removed a handful of these useless if-before-free tests several months
ago. This change removes a new one that snuck back in.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 19 Aug 2008 17:28:24 +0000 (13:28 -0400)]
mailinfo: avoid violating strbuf assertion
In handle_from, we calculate the end boundary of a section
to remove from a strbuf using strcspn like this:
el = strcspn(buf, set_of_end_boundaries);
strbuf_remove(&sb, start, el + 1);
This works fine if "el" is the offset of the boundary
character, meaning we remove up to and including that
character. But if the end boundary didn't match (that is, we
hit the end of the string as the boundary instead) then we
want just "el". Asking for "el+1" caught an out-of-bounds
assertion in the strbuf library.
This manifested itself when we got a 'From' header that had
just an email address with nothing else in it (the end of
the string was the end of the address, rather than, e.g., a
trailing '>' character), causing git-mailinfo to barf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Tue, 19 Aug 2008 18:42:04 +0000 (20:42 +0200)]
git format-patch: avoid underrun when format.headers is empty or all NLs
* builtin-log.c (add_header): Avoid a buffer underrun when
format.headers is empty or all newlines. Reproduce with this:
git config format.headers '' && git format-patch -1
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Mon, 18 Aug 2008 23:17:53 +0000 (18:17 -0500)]
t1002-read-tree-m-u-2way.sh: use 'git diff -U0' rather than 'diff -U0'
Some old platforms have an old diff which doesn't have the -U option.
'git diff' can be used in its place. Adjust the comparison function to
strip git's additional header lines to make this possible.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Robert Schiele [Mon, 18 Aug 2008 14:17:04 +0000 (16:17 +0200)]
adapt git-cvsserver manpage to dash-free syntax
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don Zickus [Thu, 14 Aug 2008 15:35:42 +0000 (11:35 -0400)]
mailinfo: re-fix MIME multipart boundary parsing
Recent changes to is_multipart_boundary() caused git-mailinfo to segfault.
The reason was after handling the end of the boundary the code tried to look
for another boundary. Because the boundary list was empty, dereferencing
the pointer to the top of the boundary caused the program to go boom.
The fix is to check to see if the list is empty and if so go on its merry
way instead of looking for another boundary.
I also fixed a couple of increments and decrements that didn't look correct
relating to content_top.
The boundary test case was updated to catch future problems like this again.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 17 Aug 2008 22:44:11 +0000 (15:44 -0700)]
Start 1.6.0.X maintenance series
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 17 Aug 2008 18:42:10 +0000 (11:42 -0700)]
GIT 1.6.0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 17 Aug 2008 18:40:56 +0000 (11:40 -0700)]
Merge git-gui 0.11.0
Junio C Hamano [Sun, 17 Aug 2008 17:53:57 +0000 (10:53 -0700)]
Merge branch 'ak/p4'
* ak/p4:
Utilise our new p4_read_pipe and p4_write_pipe wrappers
Add p4 read_pipe and write_pipe wrappers
Put in the two other configuration elements found in the source
Put some documentation in about the parameters that have been added
Move git-p4.syncFromOrigin into a configuration parameters section
Consistently use 'git-p4' for the configuration entries
If the user has configured various parameters, use them.
Switch to using 'p4_build_cmd'
If we are in verbose mode, output what we are about to run (or return)
Add a single command that will be used to construct the 'p4' command
Utilise the new 'p4_system' function.
Have a command that specifically invokes 'p4' (via system)
Utilise the new 'p4_read_pipe_lines' command
Create a specific version of the read_pipe_lines command for p4 invocations
Conflicts:
contrib/fast-import/git-p4
Robert Blum [Fri, 1 Aug 2008 19:50:03 +0000 (12:50 -0700)]
git-p4: chdir now properly sets PWD environment variable in msysGit
P4 on Windows expects the PWD environment variable to be set to the
current working dir, but os.chdir in python doesn't do so.
Signed-off-by: Robert Blum <rob.blum@gmail.com>
Acked-by: Simon Hausmann <simon@lst.de>
Acked-by: Han-Wen Nienhuys <hanwen@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Sun, 17 Aug 2008 04:25:43 +0000 (06:25 +0200)]
Improve error output of git-rebase
"git rebase" without arguments on initial startup showed:
fatal: Needed a single revision
invalid upstream
This patch makes it show the ordinary usage string.
If .git/rebase-merge or .git/rebase-apply/rebasing exists, git-rebase
will die with a message saying that a rebase is in progress and the user
should try --skip/--abort/--continue.
If .git/rebase-apply/applying exists, git-rebase will die with a message
saying that git-am is in progress, regardless how many arguments are
given.
If no arguments are given and .git/rebase-apply/ exists, but neither a
rebasing nor applying file is in that directory, git-rebase dies with a
message saying that rebase-apply exists and no arguments were given.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Sat, 16 Aug 2008 15:17:42 +0000 (17:17 +0200)]
t9300: replace '!' with test_must_fail
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 17 Aug 2008 06:21:07 +0000 (23:21 -0700)]
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Allow safely calling nukefile from a run queue handler
Marcus Griep [Fri, 15 Aug 2008 19:53:59 +0000 (15:53 -0400)]
Git.pm: Make File::Spec and File::Temp requirement lazy
This will ensure that the API at large is accessible to nearly
all Perl versions, while only the temp file caching API is tied to
the File::Temp and File::Spec modules being available.
Signed-off-by: Marcus Griep <marcus@griep.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Sat, 16 Aug 2008 02:14:33 +0000 (04:14 +0200)]
Documentation: document the pager.* configuration setting
It was already documented in RelNotes-1.6.0, but not in the git-config
manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Sat, 16 Aug 2008 03:27:31 +0000 (05:27 +0200)]
git-stash: improve synopsis in help and manual page
"git stash -h" showed some incomplete and ugly usage information.
For example, the useful "--keep-index" option for "save" or the "--index"
option for "apply" were not shown. Also in the documentation synopsis they
were not shown, so that there is no incentive to scroll down and even see
that such options exist.
This patch improves the git-stash synopsis in the documentation by
mentioning that further options to the stash commands and then copies
this synopsis to the usage information string of git-stash.sh.
For the latter, the dashless git command string has to be inserted on the
second and the following usage lines. The code of this is taken from
git-sh-setup so that all lines will show the command string.
Note that the "create" command is not advertised at all now, because
it was not mentioned in git-stash.txt.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Blake [Fri, 15 Aug 2008 15:01:03 +0000 (15:01 +0000)]
Makefile: building git in cygwin 1.7.0
On platforms with $X, make removes any leftover scripts 'a' from
earlier builds if a new binary 'a.exe' is now built. However, on
cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file.
Test for file equality before attempting a remove, in order to avoid
nuking just-built binaries.
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Fri, 8 Aug 2008 23:28:54 +0000 (01:28 +0200)]
git-am: ignore --binary option
The git-apply documentation says that --binary is a historical option.
This patch lets git-am ignore --binary and removes advertisements of this
option.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marcus Griep [Fri, 15 Aug 2008 17:59:28 +0000 (13:59 -0400)]
bash-completion: Add non-command git help files to bash-completion
Git allows access to the gitattributes man page via `git help attributes`,
but this is not discoverable via the bash-completion mechanism. This
patch adds all current non-command man pages to the completion candidate
list.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Riesen [Fri, 15 Aug 2008 07:32:30 +0000 (09:32 +0200)]
Fix t3700 on filesystems which do not support question marks in names
Use square brackets instead.
And the prominent example of the deficiency are, as usual, the filesystems
of Microsoft house.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Thu, 14 Aug 2008 22:40:39 +0000 (23:40 +0100)]
Utilise our new p4_read_pipe and p4_write_pipe wrappers
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Thu, 14 Aug 2008 22:40:38 +0000 (23:40 +0100)]
Add p4 read_pipe and write_pipe wrappers
Two additional wrappers to cover 3 places where we utilise p4 in piped
form. Found by Tor Arvid Lund.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lee Marlow [Thu, 14 Aug 2008 22:41:11 +0000 (16:41 -0600)]
bash completion: Add '--merge' long option for 'git log'
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lee Marlow [Thu, 14 Aug 2008 22:41:10 +0000 (16:41 -0600)]
bash completion: Add completion for 'git mergetool'
The --tool= long option to "git mergetool" can be completed with:
kdiff3 tkdiff meld xxdiff emerge
vimdiff gvimdiff ecmerge opendiff
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Thu, 14 Aug 2008 17:37:41 +0000 (13:37 -0400)]
git format-patch documentation: clarify what --cover-letter does
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Raible [Thu, 14 Aug 2008 17:12:54 +0000 (10:12 -0700)]
bash completion: 'git apply' should use 'fix' not 'strip'
Bring completion up to date with the man page.
Signed-off-by: Eric Raible <raible@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 14 Aug 2008 02:22:29 +0000 (19:22 -0700)]
Merge branch 'maint'
* maint:
t5304-prune: adjust file mtime based on system time rather than file mtime
Fix escaping of glob special characters in pathspecs
Brandon Casey [Thu, 14 Aug 2008 00:49:30 +0000 (19:49 -0500)]
t5304-prune: adjust file mtime based on system time rather than file mtime
test-chmtime can adjust the mtime of a file based on the file's mtime, or
based on the system time. For files accessed over NFS, the file's mtime is
set by the NFS server, and as such may vary a great deal from the NFS
client's system time if the clocks of the client and server are out of
sync. Since these tests are testing the expire feature of git-prune, an
incorrect mtime could cause a file to be expired or not expired incorrectly
and produce a test failure.
Avoid this NFS pitfall by modifying the calls to test-chmtime so that the
mtime is adjusted based on the system time, rather than the file's mtime.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 14 Aug 2008 00:48:57 +0000 (19:48 -0500)]
test-parse-options: use appropriate cast in length_callback
OPT_CALLBACK() is passed &integer which is now an "int" rather than
"unsigned long". Update the length_callback function.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Ballard [Wed, 13 Aug 2008 22:34:34 +0000 (15:34 -0700)]
Fix escaping of glob special characters in pathspecs
match_one implements an optimized pathspec match where it only uses
fnmatch if it detects glob special characters in the pattern. Unfortunately
it didn't treat \ as a special character, so attempts to escape a glob
special character would fail even though fnmatch() supports it.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Wed, 13 Aug 2008 21:41:24 +0000 (23:41 +0200)]
rebase -i -p: fix parent rewriting
The existing parent rewriting did not handle the case where a previous
commit was amended (via edit or squash). Fix by always putting the
new sha1 of the last commit into the $REWRITTEN map.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Thomas Rast [Wed, 13 Aug 2008 21:41:23 +0000 (23:41 +0200)]
rebase -i -p: handle index and workdir correctly
'git rebase -i -p' forgot to update the index and working directory
during fast forwards. Fix this. Makes 'GIT_EDITOR=true rebase -i -p
<ancestor>' a no-op again.
Also, it attempted to do a fast forward even if it was instructed not
to commit (via -n). Fall back to the cherry-pick code path and let
that handle the issue for us.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Junio C Hamano [Wed, 13 Aug 2008 04:42:22 +0000 (21:42 -0700)]
GIT 1.6.0-rc3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 13 Aug 2008 05:46:22 +0000 (22:46 -0700)]
Merge branch 'maint'
* maint:
Do not talk about "diff" in rev-list documentation.
Junio C Hamano [Mon, 11 Aug 2008 18:46:56 +0000 (11:46 -0700)]
Do not talk about "diff" in rev-list documentation.
Since
8c02eee (git-rev-list(1): group options; reformat; document more
options, 2006-09-01), git-rev-list documentation talks as if it supports
any kind of diff output. It doesn't.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 13 Aug 2008 04:41:29 +0000 (21:41 -0700)]
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git-svn: Reduce temp file usage when dealing with non-links
git-svn: Make it incrementally faster by minimizing temp files
Git.pm: Add faculties to allow temp files to be cached
Marcus Griep [Tue, 12 Aug 2008 16:45:39 +0000 (12:45 -0400)]
git-svn: Reduce temp file usage when dealing with non-links
Currently, in sub 'close_file', git-svn creates a temporary file and
copies the contents of the blob to be written into it. This is useful
for symlinks because svn stores symlinks in the form:
link $FILE_PATH
Git creates a blob only out of '$FILE_PATH' and uses file mode to
indicate that the blob should be interpreted as a symlink.
As git-hash-object is invoked with --stdin-paths, a duplicate of the
link from svn must be created that leaves off the first five bytes,
i.e. 'link '. However, this is wholly unnecessary for normal blobs,
though, as we already have a temp file with their contents. Copying
the entire file gains nothing, and effectively requires a file to be
written twice before making it into the object db.
This patch corrects that issue, holding onto the substr-like
duplication for symlinks, but skipping it altogether for normal blobs
by reusing the existing temp file.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
Marcus Griep [Tue, 12 Aug 2008 16:00:53 +0000 (12:00 -0400)]
git-svn: Make it incrementally faster by minimizing temp files
Currently, git-svn would create a temp file on four occasions:
1. Reading a blob out of the object db
2. Creating a delta from svn
3. Hashing and writing a blob into the object db
4. Reading a blob out of the object db (in another place in code)
Any time git-svn did the above, it would dutifully create and then
delete said temp file. Unfortunately, this means that between 2-4
temporary files are created/deleted per file 'add/modify'-ed in
svn (O(n)). This causes significant overhead and helps the inode
counter to spin beautifully.
By its nature, git-svn is a serial beast. Thus, reusing a temp file
does not pose significant problems. "truncate and seek" takes much
less time than "unlink and create". This patch centralizes the
tempfile creation and holds onto the tempfile until they are deleted
on exit. This significantly reduces file overhead, now requiring
at most three (3) temp files per run (O(1)).
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
Marcus Griep [Tue, 12 Aug 2008 16:00:18 +0000 (12:00 -0400)]
Git.pm: Add faculties to allow temp files to be cached
This patch offers a generic interface to allow temp files to be
cached while using an instance of the 'Git' package. If many
temp files are created and destroyed during the execution of a
program, this caching mechanism can help reduce the amount of
files created and destroyed by the filesystem.
The temp_acquire method provides a weak guarantee that a temp
file will not be stolen by subsequent requests. If a file is
locked when another acquire request is made, a simple error is
thrown.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
Thomas Rast [Mon, 11 Aug 2008 23:55:36 +0000 (01:55 +0200)]
Documentation: rev-list-options: Rewrite simplification descriptions for clarity
This completely rewrites the documentation of --full-history with lots
of examples.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gustaf Hendeby [Tue, 12 Aug 2008 14:24:26 +0000 (16:24 +0200)]
Teach git diff about BibTeX head hunk patterns
All BibTeX entries starts with an @ followed by an entry type. Since
there are many entry types and own can be defined, the pattern matches
legal entry type names instead of just the default types (which would
be a long list). The pattern also matches strings and comments since
they will also be useful to position oneself in a bib-file.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gustaf Hendeby [Tue, 12 Aug 2008 14:24:25 +0000 (16:24 +0200)]
gitattributes: Document built in hunk header patterns
Since the hunk header pattern text was written patterns for Ruby and
Pascal/Delphi have been added. For users to be able to find them they
should be documented not only in code.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen R. van den Berg [Tue, 12 Aug 2008 19:36:13 +0000 (21:36 +0200)]
git-daemon: SysV needs the signal handler reinstated.
Fixes the bug on (amongst others) Solaris that only the first
child ever is reaped.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 12 Aug 2008 05:15:28 +0000 (22:15 -0700)]
diff --check: do not unconditionally complain about trailing empty lines
Recently "git diff --check" learned to detect new trailing blank lines
just like "git apply --whitespace" does. However this check should not
trigger unconditionally. This patch makes it honor the whitespace
settings from core.whitespace and gitattributes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 12 Aug 2008 02:24:28 +0000 (19:24 -0700)]
Merge branch 'maint'
* maint:
git-bisect: fix wrong usage of read(1)
Anand Kumria [Sun, 10 Aug 2008 18:26:35 +0000 (19:26 +0100)]
Put in the two other configuration elements found in the source
I am not entirely clear what these parameters do but felt it
useful to call them out in the documentation.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:34 +0000 (19:26 +0100)]
Put some documentation in about the parameters that have been added
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:33 +0000 (19:26 +0100)]
Move git-p4.syncFromOrigin into a configuration parameters section
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:32 +0000 (19:26 +0100)]
Consistently use 'git-p4' for the configuration entries
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:31 +0000 (19:26 +0100)]
If the user has configured various parameters, use them.
Some repositories require authentication and access to certain
hosts. Allow git-p4 to pull this information from the configuration
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:30 +0000 (19:26 +0100)]
Switch to using 'p4_build_cmd'
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:29 +0000 (19:26 +0100)]
If we are in verbose mode, output what we are about to run (or return)
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:28 +0000 (19:26 +0100)]
Add a single command that will be used to construct the 'p4' command
Rather than having three locations where the 'p4' command is built up,
refactor this into the one place. This will, eventually, allow us to
have one place where we modify the evironment or pass extra
command-line options to the 'p4' binary.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:27 +0000 (19:26 +0100)]
Utilise the new 'p4_system' function.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:26 +0000 (19:26 +0100)]
Have a command that specifically invokes 'p4' (via system)
Similiar to our 'p4_read_pipe_lines' command, we can isolate
specific changes to the invocation method in the one location
with this change.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:25 +0000 (19:26 +0100)]
Utilise the new 'p4_read_pipe_lines' command
Now that we have the new command, we can utilise it and then
eventually, isolate any changes required to the one place.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anand Kumria [Sun, 10 Aug 2008 18:26:24 +0000 (19:26 +0100)]
Create a specific version of the read_pipe_lines command for p4 invocations
This will make it easier to isolate changes to how 'p4' is invoked
(whether with parameters or not, etc.).
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Mon, 11 Aug 2008 23:55:35 +0000 (01:55 +0200)]
Documentation: rev-list-options: Fix a typo
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Petr Baudis [Mon, 11 Aug 2008 22:34:46 +0000 (00:34 +0200)]
Adjust for the new way of enabling the default post-update hook
The post-update hook, which is required to be enabled in order for
the repository to be accessible over HTTP, is not enabled by
chmod a+x anymore, but instead by dropping the .sample suffix.
This patch emphasizes this change in the release notes (since
I believe this is rather noticeable backwards-incompatible change).
It also adjusts the documentation which still described the old way
and fixes t/t5540-http-push.sh, which was broken for 1.5 month
but apparently noone ever runs this test.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Francis Moreau [Mon, 11 Aug 2008 17:37:46 +0000 (19:37 +0200)]
git-bisect: fix wrong usage of read(1)
Signed-off-by: Francis Moreau <francis.moro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nguyễn Thái Ngọc Duy [Sun, 10 Aug 2008 15:26:23 +0000 (22:26 +0700)]
Fix typo in comments of longest_ancestor_length()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 11 Aug 2008 21:28:35 +0000 (14:28 -0700)]
Merge branch 'maint'
* maint:
Re-fix rev-list-options documentation
Junio C Hamano [Mon, 11 Aug 2008 21:24:51 +0000 (14:24 -0700)]
Re-fix rev-list-options documentation
18a2197 (Documentation: rev-list-options: Fix -g paragraph formatting,
2008-08-10) introduced the third paragraph that is continued, but it seems
to confuse docbook toolchain on FC9 machines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 11 Aug 2008 07:53:31 +0000 (00:53 -0700)]
Merge branch 'maint'
* maint:
Documentation: fix invalid reference to 'mybranch' in user manual
Fix deleting reflog entries from HEAD reflog
reflog test: add more tests for 'reflog delete'
Documentation: rev-list-options: Fix -g paragraph formatting
Conflicts:
Documentation/user-manual.txt
Ivan Stankovic [Sun, 10 Aug 2008 16:22:14 +0000 (18:22 +0200)]
Documentation: fix invalid reference to 'mybranch' in user manual
Signed-off-by: Ivan Stankovic <pokemon@fly.srk.fer.hr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 11 Aug 2008 06:21:25 +0000 (23:21 -0700)]
Fix deleting reflog entries from HEAD reflog
dwim_ref() used to resolve HEAD symbolic ref to its target (i.e. current
branch). This incorrectly removed the reflog entry from the current
branch when 'git reflog delete HEAD@{1}' was asked for.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pieter de Bie [Sat, 9 Aug 2008 23:33:29 +0000 (01:33 +0200)]
reflog test: add more tests for 'reflog delete'
This adds more tests for 'reflog delete' and marks it as
broken, as currently a call to 'git reflog delete HEAD@{1}'
deletes entries in the currently checked out branch's log,
not the HEAD log.
Noticed by John Wiegley
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Sun, 10 Aug 2008 13:04:34 +0000 (15:04 +0200)]
Documentation: rev-list-options: Fix -g paragraph formatting
- Add an escape to @{now}. Without the escape, the brace does
something magic and eats half the sentence up to the closing brace
at 'timestamp}'.
- Join the last paragraph with a '+'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alexander Gavrilov [Sat, 9 Aug 2008 10:41:50 +0000 (14:41 +0400)]
gitk: Allow safely calling nukefile from a run queue handler
Originally dorunq assumed that the queue entry remained first
in the queue after the script eval, and blindly removed it.
However, if the handler calls nukefile, it may not be the
case anymore, and a random queue entry gets dropped instead.
This makes dorunq remove the entry before calling the
script, and adds a global variable to allow other functions
to determine if they are called from within a dorunq handler.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Shawn O. Pearce [Sun, 10 Aug 2008 07:02:08 +0000 (00:02 -0700)]
git-gui 0.11
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Sat, 9 Aug 2008 22:11:48 +0000 (15:11 -0700)]
Update draft RelNotes for 1.6.0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 9 Aug 2008 08:40:08 +0000 (01:40 -0700)]
Merge branch 'maint'
* maint:
asciidoc markup fixes
Fail properly when cloning from invalid HTTP URL
Conflicts:
Documentation/git-push.txt
Junio C Hamano [Sat, 9 Aug 2008 08:17:24 +0000 (01:17 -0700)]
mailinfo: fix MIME multi-part message boundary handling
After finding a MIME multi-part message boundary line, the handle_body()
function is supposed to first flush any accumulated contents from the
previous part to the output stream. However, the code mistakenly output
the boundary line it found.
The old code that used one global, fixed-length buffer line[] used an
alternate static buffer newline[] for keeping track of this accumulated
contents and flushed newline[] upon seeing the boundary; when
3b6121f
(git-mailinfo: use strbuf's instead of fixed buffers, 2008-07-13)
converted a fixed-length buffer in this program to use strbuf,these two
buffers were converted to "line" and "prev" (the latter of which now has a
much more sensible name) strbufs, but the code mistakenly flushed "line"
(which contains the boundary we have just found), instead of "prev".
This resulted in the first boundary to be output in front of the first
line of the message.
The rewritten implementation of handle_boundary() lost the terminating
newline; this would then result in the second line of the message to be
stuck with the first line.
The is_multipart_boundary() was designed to catch both the internal
boundary and the terminating one (the one with trailing "--"); this also
was broken with the rewrite, and the code in the handle_boundary() to
handle the terminating boundary was never triggered.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pieter de Bie [Fri, 8 Aug 2008 22:37:02 +0000 (00:37 +0200)]
builtin-rm: Add a --force flag
This adds a --force flag to git-rm, making it somewhat easier for
subversion people to switch.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Fri, 8 Aug 2008 08:41:58 +0000 (01:41 -0700)]
git-svn: wrap long lines in a few places
Oops, I let a few patches slip by with long lines in them.
Extracted from an unrelated patch by: Marcus Griep <marcus@griep.us>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marcus Griep [Fri, 8 Aug 2008 08:41:57 +0000 (01:41 -0700)]
git-svn: Allow deep branch names by supporting multi-globs
Some repositories use a deep branching strategy, such as:
branches/1.0/1.0.rc1
branches/1.0/1.0.rc2
branches/1.0/1.0.rtm
branches/1.0/1.0.gold
Only allowing a single glob stiffles this.
This change allows for a single glob 'set' to accept this deep
branching strategy.
The ref glob depth must match the branch glob depth. When using
the -b or -t options for init or clone, this is automatically
done.
For example, using the above branches:
svn-remote.svn.branches = branches/*/*:refs/remote/*/*
gives the following branch names:
1.0/1.0.rc1
1.0/1.0.rc2
1.0/1.0.rtm
1.0/1.0.gold
[ew:
* removed unrelated line-wrapping changes
* fixed line-wrapping in a few more places
* removed trailing whitespace
* fixed bashism in test
* removed unnecessary httpd startup in test
* changed copyright on tests to 2008 Marcus Griep
* added executable permissions to new tests
]
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marcus Griep [Fri, 8 Aug 2008 08:41:56 +0000 (01:41 -0700)]
Fix multi-glob assertion in git-svn
Fixes bad regex match check for multiple globs (would always return
one glob regardless of actual number).
[ew: fixed a bashism in the test and some minor line-wrapping]
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Thu, 7 Aug 2008 23:50:31 +0000 (01:50 +0200)]
filter-branch: be more helpful when an annotated tag changes
Previously, git-filter-branch failed if it attempted to update an
annotated tag. Now we ignore this condition if --tag-name-filter is
given, so that we can later rewrite the tag. If no such option was
provided, we warn the user that he might want to run with
"--tag-name-filter cat" to achieve the intended effect.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Thu, 7 Aug 2008 14:16:03 +0000 (16:16 +0200)]
Documentation: filter-branch: document how to filter all refs
Document the '--' option that can be used to pass rev-list options
(not just arguments), and give an example usage of '-- --all'. Remove
reference to "the new branch name"; filter-branch takes arbitrary
arguments to rev-list since
dfd05e3.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 7 Aug 2008 19:06:26 +0000 (14:06 -0500)]
Makefile: add a target which will abort compilation with ancient shells
This adds a make target which can be used to try to execute certain shell
constructs which are required for compiling and running git.
This patch provides a test for the $() notation for command substition
which is used in the Makefile and extensively in the git scripts.
The make target is named in such a way as to be a hint to the user that
SHELL_PATH should be set to an appropriate shell. If the shell command
fails, the user should receive a message similar to the following:
make: *** [please_set_SHELL_PATH_to_a_more_modern_shell] Error 2
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 6 Aug 2008 15:45:23 +0000 (17:45 +0200)]
bash: remove redundant check for 'git stash apply' options
It will never trigger anyway because of the first check, and even if it
would, it would not offer the command line option.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 8 Aug 2008 20:31:27 +0000 (13:31 -0700)]
GIT-VERSION-GEN: mark the version 'dirty' only if there are modified files
We used to mark the version string with '-dirty' if the cache was not up
to date, but the only thing we want to know is if the binaries are built
from modified source. Refresh the cache to avoid false dirtyness.
Christian Jaeger noticed this issue while building under fakeroot
environment (without -u) that lies about the file ownership data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 7 Aug 2008 19:03:42 +0000 (14:03 -0500)]
Makefile: set SHELL to value of SHELL_PATH
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Wed, 6 Aug 2008 21:22:00 +0000 (16:22 -0500)]
Documentation: user-manual: "git commit -a" doesn't motivate .gitignore
"git commit -a" ignores untracked files and follows all tracked
files, regardless of whether they are listed in .gitignore. So
don't use it to motivate gitignore.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Thu, 7 Aug 2008 09:06:16 +0000 (02:06 -0700)]
git-svn: add ability to specify --commit-url for dcommit
This allows one to use public svn:// URLs for fetch and
svn+ssh:// URLs for committing (without using the complicated
rewriteRoot option, reimporting or git-filter-branch).
Using this can also help avoid unnecessary server
authentication/encryption overhead on busy SVN servers.
Along with the new --revision option, this can also be allowed
to override the branch detection in dcommit, too. This is
potentially dangerous and not recommended! (And also purposely
undocumented, but the loaded gun is there in case somebody
wants to make it safe).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Fri, 8 Aug 2008 07:52:55 +0000 (09:52 +0200)]
Documentation: commit-tree: remove 16 parents restriction
ef98c5ca lifted the 16 parents restriction in builtin-commit-tree.c,
but forgot to update the documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Aug 2008 23:05:25 +0000 (16:05 -0700)]
asciidoc markup fixes
I see quite a few pages on k.org site, e.g.
http://www.kernel.org/pub/software/scm/git/docs/git-rerere.html
(scroll down to find "After this test merge")
are misformatted to lose teletype text '+' that is followed by a comma,
and turns the following paragraph all typeset in teletype.
This patch seems to fix the issue at the site (meaning, with the
particular vintage of asciidoc and docbook toolchain), without breaking
things with the version I have at my primary development machine, but
wider testing is very much appreciated.
After this patch,
git grep '`+`,' -- Documentation
should report noting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Fri, 8 Aug 2008 02:29:35 +0000 (04:29 +0200)]
clone --mirror: avoid storing repeated tags
With --mirror, clone asks for refs/* already, so it does not need to
ask for ref/tags/*, too.
Noticed by Cesar Eduardo Barros.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Aug 2008 01:56:23 +0000 (18:56 -0700)]
Merge branch 'lt/config-fsync' into maint
* lt/config-fsync:
Add config option to enable 'fsync()' of object files
Split up default "i18n" and "branch" config parsing into helper routines
Split up default "user" config parsing into helper routine
Split up default "core" config parsing into helper routine
Junio C Hamano [Thu, 7 Aug 2008 01:52:50 +0000 (18:52 -0700)]
Merge branch 'jc/reflog-expire' into maint
* jc/reflog-expire:
Make default expiration period of reflog used for stash infinite
Per-ref reflog expiry configuration