OSDN Git Service
Tom Stellard [Wed, 2 Oct 2013 15:56:20 +0000 (11:56 -0400)]
clover: Use std::numeric_limits<std::size_t>::max() instead of SIZE_MAX
This prevents a build failure on some systems.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Roland Scheidegger [Fri, 18 Oct 2013 18:54:01 +0000 (20:54 +0200)]
llvmpipe: enable seamless cube filtering
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Roland Scheidegger [Fri, 18 Oct 2013 18:52:26 +0000 (20:52 +0200)]
gallivm: implement seamless cube filtering
For seamless cube filtering it is necessary to determine new faces and new
coords per sample. The logic for this is _seriously_ complex (what needs
to happen is very "asymmetric" wrt face, x/y under/overflow), further
complicated by the fact that if the 4 samples are in a corner (meaning we
only have actually 3 samples, and all 3 are on different faces) then
falling off the edge is happening _both_ on x and y axis simultaneously.
There was a noticeable performance hit in mesa's cubemap demo when seamless
filtering was forced on (just below 10 percent or so in a debug build, when
disabling all filtering hacks, otherwise it would probably be a bit more) and
when always doing the logic, hence use a branch which it only does it if any
of the pixels in a quad (or in two quads) actually hit this. With that there
was no measurable performance hit in the cubemap demo (neither in a debug nor
release buidl), but this will vary (cubemap demo very rarely hits edges).
Might also be different on other cpus, as this forces SoA sampling path which
potentially can be quite a bit slower.
Note that as for corners, this code gets all the 3 samples which actually
exist right, and the 4th texel will simply be the same as one of the others,
meaning that filter weights will be a bit wrong. This however should be
enough for full OpenGL (but not d3d10) compliance.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Christian König [Sat, 12 Oct 2013 16:51:25 +0000 (18:51 +0200)]
winsys/radeon: cleanup CS offloading
Using atomic function for ncs is superfluous since it is
protected by a mutex anyway. Also lock the mutex only once
while retrieving the next CS for submission.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Rico Schüller [Sun, 20 Oct 2013 10:39:59 +0000 (12:39 +0200)]
radeon: Enable ARB_texture_mirror_clamp_to_edge.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Rico Schüller <kgbricola@web.de>
Rico Schüller [Sun, 20 Oct 2013 10:39:58 +0000 (12:39 +0200)]
r200: Enable ARB_texture_mirror_clamp_to_edge.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Rico Schüller <kgbricola@web.de>
Rico Schüller [Sun, 20 Oct 2013 10:39:57 +0000 (12:39 +0200)]
gallium: Enable ARB_texture_mirror_clamp_to_edge.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Rico Schüller <kgbricola@web.de>
Rico Schüller [Sun, 20 Oct 2013 10:39:56 +0000 (12:39 +0200)]
swrast: Enable ARB_texture_mirror_clamp_to_edge.
v2: fix commit message
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Rico Schüller <kgbricola@web.de>
Rico Schüller [Sun, 20 Oct 2013 10:39:55 +0000 (12:39 +0200)]
mesa: Add infrastructure for GL_ARB_texture_mirror_clamp_to_edge.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Rico Schüller <kgbricola@web.de>
Alexander von Gluck IV [Sun, 20 Oct 2013 04:31:50 +0000 (23:31 -0500)]
scons: Fix Haiku missing library
* The softpipe add-on needs libtranslation
due to the use of BTranslatorRoster
Reviewed-by: Brian Paul <brianp@vmware.com>
Alexandre Demers [Sun, 20 Oct 2013 17:48:05 +0000 (13:48 -0400)]
docs: Updating forgotten GL feature completion for r600
David Heidelberger [Mon, 7 Oct 2013 16:06:11 +0000 (18:06 +0200)]
r300g/compiler: Fix unsigned comparison with less than zero
rc_find_free_temporary_list() returns signed integer
(in case of lack of free temporary registers returns -1),
so new_index in radeon_rename_regs() should be signed.
https://bugs.freedesktop.org/show_bug.cgi?id=54867
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Vinson Lee [Sat, 19 Oct 2013 02:15:37 +0000 (19:15 -0700)]
r600g/sb: Initialize shader::dce_flags.
Fixes "Uninitialized scalar field" defect reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Vadim Girlin <vadimgirlin@gmail.com>
Kenneth Graunke [Fri, 18 Oct 2013 23:14:05 +0000 (16:14 -0700)]
i965: Mark G45 as having surface tile offset support.
Fixes a regression since
02b632d8e8f2b14c155740d28c276b5869305c60.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Vinson Lee [Sat, 12 Oct 2013 06:14:47 +0000 (23:14 -0700)]
glsl: Initialize per_vertex_accumulator::fields.
Fixes "Uninitialized pointer field" defect reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Vinson Lee [Sat, 19 Oct 2013 00:40:40 +0000 (17:40 -0700)]
mesa: Remove GLXContextID typedef from glx.h.
Fixes this build error.
CC clientattrib.lo
In file included from ../../include/GL/glx.h:333,
from glxclient.h:45,
from clientattrib.c:32:
../../include/GL/glxext.h:275: error: redefinition of typedef ‘GLXContextID’
../../include/GL/glx.h:171: note: previous declaration of ‘GLXContextID’ was here
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70591
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Carl Worth [Sat, 19 Oct 2013 00:19:31 +0000 (17:19 -0700)]
docs: Import 9.2.2 release notes, add news item.
Kenneth Graunke [Fri, 18 Oct 2013 06:21:24 +0000 (23:21 -0700)]
docs: Note that we support OpenGL 3.3 in the release notes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Fri, 18 Oct 2013 06:14:23 +0000 (23:14 -0700)]
i965: Enable OpenGL 3.3 and GLSL 3.30.
Everything necessary for these appears to be implemented. We'll want to
add more tests to guard against bugs, but it should be functionally
complete.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Jon TURNEY [Thu, 3 Oct 2013 20:15:11 +0000 (21:15 +0100)]
translate_sse: Fix generated code argument handling for msabi on x86_64
translate_sse.c contains code for msabi on x86_64, but it appears to be
untested.
Currently arguments 1 and 2 passed to the generated code are moved as 32-bit
quantities into the registers used by sysvabi, irrespective of the architecture.
Since these may be pointers, they must be moved as 64-bit quantities to avoid
truncation.
Commit
f4dd0991719ef3e2606920c5100b372181c60899 disabled tranlate_sse.c on MinGW
x86_64, I don't know if was due to this issue, or a different one...
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Brian Paul <brianp@vmware.com>
Jon TURNEY [Thu, 3 Oct 2013 20:11:52 +0000 (21:11 +0100)]
rtasm: Cygwin uses the msabi calling convention on x86_64
Cygwin also uses the msabi calling convention on x86_64, not the sysvabi calling
convention
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Brian Paul <brianp@vmware.com>
ignored, and an empty message aborts the commit.
Jon TURNEY [Sat, 21 Sep 2013 16:16:37 +0000 (17:16 +0100)]
rtasm: The heap is NX on 64-bit Cygwin, so use the rtasm_exec_malloc() implementation which uses mmap()
The heap is NX on 64-bit Cygwin, so use the rtasm_exec_malloc() implementation
which uses mmap() to allocate an anonymous page with execute permission, rather
than the one which just uses malloc().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Brian Paul <brianp@vmware.com>
Alexander von Gluck IV [Thu, 17 Oct 2013 01:24:13 +0000 (20:24 -0500)]
scons: Simplified fix of llvm cxxflags for rtti
* Based on ideas of Jose Fonseca
* A rework of
ce8eadb6e8
Tested-by: Vinson Lee <vlee@freedesktop.org>
Paul Berry [Thu, 17 Oct 2013 20:47:35 +0000 (13:47 -0700)]
glsl: Fix MSVC build (missing strcasecmp())
MSVC doesn't have a strcasecmp() function; it uses _stricmp() instead.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Kenneth Graunke [Tue, 15 Oct 2013 23:17:15 +0000 (16:17 -0700)]
i965: Fold brwInitVtbl() into brwCreateContext().
With most of the virtual functions gone, brwInitVtbl() is now tiny.
Merging it into the caller allows us to delete the entire file.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Tue, 15 Oct 2013 23:13:45 +0000 (16:13 -0700)]
i965: Merge brw_destroy_context() into intelDestroyContext().
Now that i915 and i965 have been split, the separation between
intelDestroyContext and brw_destroy_context is kind of arbitrary.
This patch replaces the only brw->vtbl.destroy() call with the body
of brw_destroy_context (the only implementation of that virtual
function).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Tue, 15 Oct 2013 23:09:22 +0000 (16:09 -0700)]
i965: Replace dri_bo_release with drm_intel_bo_unreference.
dri_bo_release is a helper function that calls drm_intel_bo_unreference
but then also sets the pointer to NULL. This is unnecessary, since
brw_destroy_context is called from intelDestroyContext, which also frees
brw completely.
If you're still trying to access them, you've got bigger problems.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Tue, 15 Oct 2013 23:06:59 +0000 (16:06 -0700)]
i965: Unindent the body of intelDestroyContext.
Having almost the entire body of the function indented one level for a
check that should never happen seems silly. Just early return.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Tue, 15 Oct 2013 23:00:16 +0000 (16:00 -0700)]
i965: Un-virtualize brw_new_batch().
Since the i915/i965 split, there's only one implementation of this
virtual function. We may as well just call it directly.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Tue, 15 Oct 2013 22:55:42 +0000 (15:55 -0700)]
i965: Un-virtualize brw_finish_batch().
Since the i915/i965 split, there's only one implementation of this
virtual function. We may as well just call it directly.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Paul Berry [Tue, 15 Oct 2013 16:43:22 +0000 (09:43 -0700)]
glsl: In update_max_array_access, fix interface instance check.
In commit
f878d20 (glsl: Update ir_variable::max_ifc_array_access
properly), I accidentally used the wrong kind of check to determine
whether the variable being accessed was an interface instance (I used
var->get_interface_type() != NULL when I should have used
var->is_interface_instance()). As a result, if an unnamed interface
block contained a struct which contained an array,
update_max_array_access() would mistakenly interpret the struct as a
named interface block and try to dereference a null
var->max_ifc_array_access.
This patch corrects the check, fixing the null dereference.
Fixes piglit test interface-block-struct-nesting.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70368
Reviewed-by: Matt Turner <mattst88@gmail.com>
Paul Berry [Wed, 16 Oct 2013 00:25:44 +0000 (17:25 -0700)]
glsl: Treat layout-qualifier-id's as case-insensitive in desktop GLSL.
In desktop GLSL, location qualifiers are case-insensitive. In GLSL
ES, they are case-sensitive. This patch handles the difference by
using a new function to match layout qualifiers,
match_layout_qualifier(), which calls either strcmp() or strcasecmp()
as appropriate.
Fixes piglit tests:
- layout-not-case-sensitive-in.geom
- layout-not-case-sensitive-max-vert.geom
- layout-not-case-sensitive-out.geom
- layout-not-case-sensitive.frag
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Brian Paul [Thu, 17 Oct 2013 18:10:26 +0000 (12:10 -0600)]
mesa: remove PFNGLBLENDCOLORPROC, PFNGLBLENDEQUATIONPROC typedefs in gl.h
Fixes error about duplicated typedefs (also in glext.h) reported on
NetBSD 6.1
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70546
Tested-by: Vinson Lee <vlee@freedesktop.org>
Brian Paul [Thu, 17 Oct 2013 15:28:17 +0000 (09:28 -0600)]
st/mesa: add a few comments in st_create_context_priv()
Dave Airlie [Mon, 14 Oct 2013 07:27:48 +0000 (17:27 +1000)]
st/mesa: handle layer and primitive id output and point size input
This fixes a number of piglit crashes when running on a hacked up llvmpipe.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Dave Airlie [Mon, 14 Oct 2013 02:18:53 +0000 (12:18 +1000)]
st/mesa: add geometry shader ubo support
This just adds the missing bits so the ubo tests don't crash.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Fabian Bieler [Wed, 29 May 2013 22:54:55 +0000 (00:54 +0200)]
mesa/st: Allow geometry shaders without gl_Position export.
From the ARB_geometry_shader4 spec (section Geometry Shader outputs):
"The built-in special variable gl_Position is intended to hold the
homogeneous vertex position. Writing gl_Position is optional."
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Bryan Cain [Fri, 15 Feb 2013 16:02:18 +0000 (10:02 -0600)]
st/mesa, glsl_to_tgsi: add support for geometry shaders
v2 (Bryan Cain <bryancain3@gmail.com>): fix 2D array indexing order.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Bryan Cain [Fri, 15 Feb 2013 14:53:20 +0000 (08:53 -0600)]
mesa/st: Add VARYING_SLOT_TEX[1-7] to st_translate_geometry_program().
v2 (Paul Berry <stereotype441@gmail.com>: Split out to separate patch
(previously this was part of "glsl: add builtins for geometry
shaders.")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Kristian Høgsberg [Thu, 17 Oct 2013 05:09:47 +0000 (22:09 -0700)]
Revert "i965: Create ARGB2101010 DRI configs"
Exposing 10-bit color configs confuses too many applications that try to
use the chooser to pick an 8 bit config. The chooser consider an fbconfig
with more bits a better match and will thus give a 10 bit config when an
application asks for a config with GLX_RED_SIZE 1 or 8.
One key example is glxinfo, which does this, and then doesn't specify that
it needs a config where GLX_DRAWABLE_TYPE has the GLX_WINDOW_BIT set.
This way it ends up with a 10 bit config that it can't use to create a
GLX window and fails to log extensions.
This reverts commit
f354bcc1770e9df88db51eba5a4543a09ca6d128.
https://bugs.freedesktop.org/show_bug.cgi?id=70557
Vadim Girlin [Mon, 14 Oct 2013 13:19:12 +0000 (17:19 +0400)]
r600g/sb: fix issue with DCE between GVN and GCM (v2)
We can't perform DCE using the liveness pass between GVN and GCM
because it relies on the correct schedule, but GVN doesn't care about
preserving correctness - it's rescheduled later by GCM.
This patch makes dce_cleanup pass perform simple DCE
between GVN and GCM instead of relying on liveness pass.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=70088
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Matt Turner [Wed, 16 Oct 2013 19:01:04 +0000 (12:01 -0700)]
glapi: Add missing XML files to Makefile dependencies.
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Matt Turner [Wed, 16 Oct 2013 06:42:19 +0000 (23:42 -0700)]
glsl: Optimize mul(a, -1) into neg(a).
Two extra instructions in some heroesofnewerth shaders, but a win for
everything else.
total instructions in shared programs:
1531352 ->
1530815 (-0.04%)
instructions in affected programs: 121898 -> 121361 (-0.44%)
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 9 Oct 2013 06:30:08 +0000 (23:30 -0700)]
i965/fs: Handle printing HW_REGS in dump_instruction().
Scheduling debugging now prints:
Instructions before scheduling (reg_alloc 1)
0: linterp vgrf20, hw_reg2, hw_reg3, hw_reg4,
1: linterp vgrf21, hw_reg2, hw_reg3, hw_reg4+16,
Reviewed-by: Eric Anholt <eric@anholt.net>
Matt Turner [Wed, 9 Oct 2013 06:03:41 +0000 (23:03 -0700)]
i965: Print instructions' children during scheduling debugging.
Useful for tracking down problems in dependency calculations.
Scheduling debugging now prints:
clock 2, scheduled: linterp vgrf5, hw_reg2, hw_reg3, hw_reg0,
child 0, 53 parents: fb_write (null), (null), (null), (null),
child 1, 2 parents: tex vgrf4, vgrf5, (null), (null),
child 2, 52 parents: placeholder_halt (null), (null), (null), (null),
clock 4, scheduled: linterp vgrf5+1, hw_reg2, hw_reg3, hw_reg0+16,
child 0, 52 parents: fb_write (null), (null), (null), (null),
child 1, 1 parents: tex vgrf4, vgrf5, (null), (null),
now available
child 2, 51 parents: placeholder_halt (null), (null), (null), (null),
Reviewed-by: Eric Anholt <eric@anholt.net>
José Fonseca [Wed, 16 Oct 2013 22:05:51 +0000 (15:05 -0700)]
Revert "scons: Fix build when rtti is disabled"
This reverts commit
94d05bf87a21bd364e84f699a0064e5fba58a6f9 as it has a
few problems:
- it breaks windows builds becuase env[LLVM_CXXFLAGS] is never set there
- it is merging not only rtti, but the whole cxxflags (defines etc)
which has proven to be a source of troubles (breaks debugging etc.)
Tom Stellard [Thu, 3 Oct 2013 14:56:35 +0000 (07:56 -0700)]
radeonsi: Use 'SI' as the LLVM processor for CIK on LLVM <= 3.3
LLVM 3.3 does not know about CIK processors, and the codes paths for SI
and CIK are the same.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Tom Stellard [Tue, 17 Sep 2013 22:47:34 +0000 (15:47 -0700)]
r600g/compute Improve debugging output
Tom Stellard [Mon, 16 Sep 2013 17:32:59 +0000 (10:32 -0700)]
clover: Link libclc before running any optimizations
This is required in order for clang to correctly handle the OpenCL C
barrier() builtin which has the following restrictions acording to
the OpenCL 1.1 Specification:
If barrier is inside a conditional statement, then all work-items must
enter the conditional if any work-item enters the conditional statement
and executes the barrier.
If barrier is inside a loop, all work-items must execute the barrier for
each iteration of the loop before any are allowed to continue execution
beyond the barrier.
By linking before otimizations, we can replace calls to barrier() with
calls to a target specific intrinsic which has the noduplicate attribute
This attribute prevents clang from performing optimizations which could
violate the above rules.
This attribute must be applied to the call instruction that invokes
the function, so it is not enough to add this attribute the barrier()
declaration.
As a bonus this will probably speed up compile times since we will no
longer need to run link-time optimizations.
Brian Paul [Wed, 16 Oct 2013 14:43:21 +0000 (08:43 -0600)]
mesa: change glTexImage[23]DMultisample() internalformat to GLenum
To match glext.h and the GL_ARB_texture_multisample extension.
However, the GL 4.0 spec and man page say it's GLint.
An OpenGL spec bug will be filed.
Brian Paul [Wed, 16 Oct 2013 14:26:42 +0000 (08:26 -0600)]
svga: minor fix-ups in svga_get_shader_param()
Fix debug error message. Add switch case for PIPE_SHADER_COMPUTE.
Trivial.
Brian Paul [Tue, 15 Oct 2013 23:09:22 +0000 (17:09 -0600)]
cso: fix incorrect sampler view count in cso_restore_sampler_views()
During the recent bind_sampler_states() interface change in gallium
we changed the CSO single_sampler_done() function so that if we were
decreasing the number of sampler states bound in the driver, we'd
null-out the "extra/old" sampler states to unbind them. See commit
1e2fbf265.
However, we didn't make the corresponding fix for sampler views.
This caused an assertion to fail in the svga driver which checked
that the number of sampler views matched the number of sampler states.
This patch fixes cso_restore_sampler_views() so that it nulls-out
the extra/old sampler views if the number of new views is less than
the number of current/old views.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Brian Paul [Tue, 15 Oct 2013 15:11:30 +0000 (09:11 -0600)]
mesa: update glxext.h to version
20131008
The diff is huge but the actual changes are few:
* Whitespace changes
* Items are reordered
* extern qualifiers dropped
Brian Paul [Tue, 15 Oct 2013 15:05:17 +0000 (09:05 -0600)]
mesa: update glext.h to version
20131008
Only two notable changes in this revision:
* GLvoid has been replaced by void.
* Added the GL_NV_blend_equation_advanced extension.
Brian Paul [Mon, 14 Oct 2013 23:36:06 +0000 (17:36 -0600)]
vbo: access VBO memory more efficiently when building display lists
Use GL_MAP_INVALIDATE_RANGE, UNSYNCHRONIZED and FLUSH_EXPLICIT flags
when mapping VBOs during display list compilation. This mirrors what
we do for immediate-mode VBO building in vbo_exec_vtx_map().
This improves performance for applications which interleave display
list compilation with execution. For example:
glNewList(A);
glBegin/End prims;
glEndList();
glCallList(A);
glNewList(B);
glBegin/End prims;
glEndList();
glCallList(B);
Mesa's vbo module tries to combine the vertex data from lists A and B
into the same VBO when there's room. Before, when we mapped the VBO for
building list B, we did so with GL_MAP_WRITE_BIT only. Even though we
were writing to an unused part of the buffer, the map would stall until
the preceeding drawing call finished.
Use the extra map flags and FlushMappedBufferRange() to avoid the stall.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Brian Paul [Mon, 14 Oct 2013 16:26:41 +0000 (10:26 -0600)]
mesa: consolidate cube width=height error checking
Instead of checking width==height in four places, just do it in
_mesa_legal_texture_dimensions() where we do the other width, height,
depth checks. Similarly, move the check that cube map array depth is
a multiple of 6.
This change also fixes some missing cube dimension checks for the
glTexStorage[23]D() functions.
Remove width==height assertion in _mesa_get_tex_max_num_levels() since
that's called before the other size checks for glTexStorage.
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Kristian Høgsberg [Sun, 15 Sep 2013 06:32:44 +0000 (23:32 -0700)]
gbm: Add support for gbm bos and surfaces using GBM_FORMAT_ARGB2101010
We can now add GBM support for the 10 bit/channel formats which lets us
create a gbm surface that we can use with KMS for display hardware that
support the format.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Kristian Høgsberg [Sun, 15 Sep 2013 06:31:08 +0000 (23:31 -0700)]
dri: Add __DRIimage support for the ARGB2101010 format
We add support for the ARGB2101010 color format to the DRI image extension,
which allows DRI loaders to create a __DRIimage with this color format.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Kristian Høgsberg [Sun, 15 Sep 2013 06:28:55 +0000 (23:28 -0700)]
i965: Create ARGB2101010 DRI configs
This commit enables ARGB2101010 system framebuffers (that is, DRI drawables)
for the i965 drivers. This is done by generating DRI configs that advertise
this color format as well as teaching intelCreateBuffer to pick the right
color format when it sees such a DRI config.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Kristian Høgsberg [Sun, 15 Sep 2013 06:25:54 +0000 (23:25 -0700)]
dri/common: Add support for creating ARGB2101010 configs
This extends the common dri driver infrastructure with the ability to create
__DRIconfigs for 10 bits/channel + 2 bit alphs formats. This still has
to be supported and requested by a driver, so this doesn't enable anthing yet.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Kristian Høgsberg [Wed, 25 Sep 2013 21:57:22 +0000 (14:57 -0700)]
egl_dri2: Set NativeVisualID to the matching GBM config for the gbm platform
The EGLConfig doesn't have the rgba masks, only the rgba sizes. To
make sure a config is usable with a given GBM/KMS format, we need a way
to make sure the formats really match.
Kristian Høgsberg [Sun, 15 Sep 2013 06:13:22 +0000 (23:13 -0700)]
egl_dri2: Remove depth argument from dri2_add_config()
All callers now use the more correct rgba mask mechanism for filtering
out mathcing DRI configs. Even if depth and buffer size match, the
color component layout can be different, or in case or ARGB8888 and
ARGB2101010 the color components can even be different sizes.
Since anything that the depth check would reject is also rejected by
the rgba mask comparison, the depth parameter is redundant and not
specific enough. We should probably have removed it when the rgba
masks argument was introduced, but better late than never.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Kristian Høgsberg [Sun, 15 Sep 2013 06:06:36 +0000 (23:06 -0700)]
egl_dri2: Match X11 visuals using rgba masks instead of depth
Matching on visual depth to buffer size makes 8 bpc RGBA look similar to
10 bit RGB with 2 bit alphs - both have buffer size 32. Instead, build
the rgba masks from the visual data and use that for finding matching
DRI configs.
We need to keep the special case that allows us to match 24 bit visuals
to DRI configs with buffer size 32. We do that by creating an alpha
mask of "all the non-rgb bits" for 24 bit visuals and matching a second
time with that.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Singh, Satyeshwar [Wed, 16 Oct 2013 01:11:02 +0000 (01:11 +0000)]
i965: Add support for RGB565 __DRIimage
Add information for RGB565 to the table of image formats so that we can
create a __DRIimage for that format. This in turn enables RGB565
wayland clients.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Singh, Satyeshwar [Wed, 16 Oct 2013 01:10:12 +0000 (01:10 +0000)]
egl-wayland: Add support for RGB565 pixel format for Wayland clients
With this patch Wayland clients can now ask EGL for RGB 565 format buffers
and attach them to a Wayland compositor.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Alexander von Gluck IV [Tue, 15 Oct 2013 17:08:59 +0000 (12:08 -0500)]
scons: Fix build when rtti is disabled
* The rtti fix actually dug up a bug in the scons build scripts.
* Autotools took the LLVM cpp and cxx flags, while scons only took
the cpp flags.
* This grabs the cxx flags and applies them where needed. We may
want to make the same change for the llvm cpp flags in scons.
* The only linux platform I can find with LLVM no-rtti is Ubuntu.
* Fixes bug #70471
Tested-by: Vinson Lee <vlee@freedesktop.org>
José Fonseca [Wed, 16 Oct 2013 01:08:26 +0000 (18:08 -0700)]
llvmpipe: Advertise PIPE_CAP_DEPTH_CLIP_DISABLE.
Actually implemented by draw module.
Tested piglit ARB_depth_clamp tests, which pass 100%.
Trivial.
José Fonseca [Thu, 12 Sep 2013 14:15:24 +0000 (15:15 +0100)]
draw: make vs_slot signed.
Otherwise (vs_slot < 0) will never be true.
Trivial.
Emil Velikov [Fri, 11 Oct 2013 23:19:55 +0000 (00:19 +0100)]
configure.ac: drop obsolete variable HAVE_COMMON_DRI
The original intent of the variable was to prevent adding
libdrm dependency for non drm drivers (swrast). This is
already handled with __NOT_HAVE_DRM_H, and with the recent
merge of the dri_util and drisw_util code this variable has
started causing build issues.
Eg. the following will fail
$ ./autogen.sh --with-dri-drivers=swrast --with-gallium-drivers=
$ make
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Emil Velikov [Mon, 14 Oct 2013 16:14:41 +0000 (17:14 +0100)]
swrast: add correct include for out-of-tree builds
The xmlpool/options.h file was not accessible when building
out-of-tree leading to failure.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70378
Reported-by: Fabio Pedretti <fabio.ped@libero.it>
Tested-by: Fabio Pedretti <fabio.ped@libero.it>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Bryan Cain [Tue, 16 Apr 2013 20:56:28 +0000 (15:56 -0500)]
mesa: fix transform feedback when a geometry shader is active.
When a geometry shader is active, the transform feedback primitive
type ("mode") needs to be validated against the geometry shader output
primitive type, not the primitive type passed to the glDraw*()
function.
Fixes the following piglit tests:
- glsl-1.50-geometry-primitive-types GL_LINES
- glsl-1.50-geometry-primitive-types GL_LINES_ADJACENCY
- glsl-1.50-geometry-primitive-types GL_LINE_STRIP
- glsl-1.50-geometry-primitive-types GL_LINE_STRIP_ADJACENCY
- glsl-1.50-geometry-primitive-types GL_TRIANGLES
- glsl-1.50-geometry-primitive-types GL_TRIANGLES_ADJACENCY
- glsl-1.50-geometry-primitive-types GL_TRIANGLE_FAN
Exposes previously hidden failures in the following piglit tests:
- glsl-1.50-geometry-primitive-id-restart GL_LINES other
- glsl-1.50-geometry-primitive-id-restart GL_LINES_ADJACENCY other
- glsl-1.50-geometry-primitive-id-restart GL_LINE_LOOP ffs
- glsl-1.50-geometry-primitive-id-restart GL_LINE_LOOP other
- glsl-1.50-geometry-primitive-id-restart GL_LINE_STRIP other
- glsl-1.50-geometry-primitive-id-restart GL_LINE_STRIP_ADJACENCY other
- glsl-1.50-geometry-primitive-id-restart GL_TRIANGLES other
- glsl-1.50-geometry-primitive-id-restart GL_TRIANGLES_ADJACENCY other
- glsl-1.50-geometry-primitive-id-restart GL_TRIANGLE_FAN ffs
- glsl-1.50-geometry-primitive-id-restart GL_TRIANGLE_FAN other
- glsl-1.50-geometry-primitive-id-restart GL_TRIANGLE_STRIP other
- glsl-1.50-geometry-primitive-id-restart GL_TRIANGLE_STRIP_ADJACENCY other
(These failures were previously hidden due to a flaw in the test: it
doesn't check for GL errors. I'll fix the test shortly).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Paul Berry [Wed, 28 Aug 2013 21:25:31 +0000 (14:25 -0700)]
i965/gs: Set the REORDER bit in 3DSTATE_GS.
Ivy Bridge's "reorder enable" bit gives us a binary choice for the
order in which vertices from triangle strips are delivered to the
geometry shader. Neither choice follows the OpenGL spec, but setting
the bit is better, because it gets triangle orientation correct.
Haswell replaces the "reorder enable" bit with a new "reorder mode"
bit (which occupies the same location in the command packet). This
bit gives us a different binary choice, which affects both triangle
strips and triangle strips with adjacency. Setting the bit ("reorder
trailing") gives the proper order according to the OpenGL spec.
So in either case we want to set the bit.
On Ivy Bridge, fixes piglit test "triangle-strip-orientation".
On Haswell, fixes piglit tests "glsl-1.50-geometry-primitive-types
{GL_TRIANGLE_STRIP,GL_TRIANGLE_STRIP_ADJACENCY}" and
"glsl-1.50-geometry-tri-strip-ordering-with-prim-restart *".
v2: Rename the bit to "REORDER_TRAILING" for consistency with Haswell
docs.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Paul Berry [Sun, 1 Sep 2013 12:49:17 +0000 (05:49 -0700)]
i965/fs: Remove bogus field prog_data->dispatch_width.
Despite the name, this field wasn't being set to the dispatch width at
all; it was always 8. The only place it was used was that the
constant buffer read length was aligned to it, and as far as I can
tell from the docs, there is no need to align this value to the
dispatch width; aligning it to a multiple of 8 is sufficient. So I've
just replaced it with a hardcoded 8.
v2: In gen6_wm_state, use brw->wm.base.push_const_size for consistency
with VS and GS state upload.
Reviewed-by: Eric Anholt <eric@anholt.net>
Paul Berry [Fri, 26 Jul 2013 18:55:52 +0000 (11:55 -0700)]
glsl: Add new GLSL 1.50 constants.
This patch populates the following built-in GLSL 1.50 variables based
on constants stored in ctx->Const:
- gl_MaxVertexOutputComponents
- gl_MaxGeometryInputComponents
- gl_MaxGeometryOutputComponents
- gl_MaxFragmentInputComponents
- gl_MaxGeometryTextureImageUnits
- gl_MaxGeometryOutputVertices
- gl_MaxGeometryTotalOutputComponents
- gl_MaxGeometryUniformComponents
- gl_MaxGeometryVaryingComponents
On i965/gen7, fixes all Piglit tests in "spec/glsl-1.50/built-in
constants/*" except for gl_MaxCombinedTextureImageUnits and
gl_MaxGeometryUniformComponents.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Eric Anholt [Thu, 3 Oct 2013 16:58:43 +0000 (09:58 -0700)]
i965: Move the common binding table offset code to brw_shader.cpp.
Now that both vec4 and fs are dynamically assigning offsets, a lot of the
code is the same.
v2: Avoid passing around the next offset through the class. (Review by
Paul)
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Eric Anholt [Thu, 3 Oct 2013 16:55:06 +0000 (09:55 -0700)]
i965/vec4: Dynamically assign the VS/GS binding table offsets.
Note that the dropped comment in brw_context.h is mostly (better written)
in brw_binding_table.c as well.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Eric Anholt [Thu, 3 Oct 2013 01:53:04 +0000 (18:53 -0700)]
i965/fs: Dynamically set up the WM binding table offsets.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Eric Anholt [Wed, 2 Oct 2013 21:07:40 +0000 (14:07 -0700)]
i965: Make a brw_stage_prog_data for storing the SURF_INDEX information.
It would be nice to be able to pack our binding table so that programs
that use 1 render target don't upload an extra BRW_MAX_DRAW_BUFFERS - 1
binding table entries. To do that, we need the compiled program to have
information on where its surfaces go.
v2: Rename size to size_bytes to be more explicit.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Eric Anholt [Thu, 3 Oct 2013 17:30:07 +0000 (10:30 -0700)]
i965: Always have the struct gl_program * in the backend visitor.
vec4 already had it, so put it in the FS, too.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Eric Anholt [Thu, 3 Oct 2013 16:56:45 +0000 (09:56 -0700)]
i965: Drop a couple of unused defines.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Eric Anholt [Wed, 2 Oct 2013 21:37:26 +0000 (14:37 -0700)]
i965: Remove dead arguments from prog_data_compare.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Alexander von Gluck IV [Sat, 12 Oct 2013 17:12:31 +0000 (17:12 +0000)]
build: remove forced -fno-rtti
* As discussed on the mailing list,
forced no-rtti breaks C++ public
API's such as the Haiku C++ libGL.so
* -fno-rtti *can* be still set however
instead of blindly forcing -fno-rtti,
we can rely on the llvm-config
--cppflags output.
If the system llvm is built without
rtti (default), the no-rtti flag will be
present in llvm-config --cppflags
(which we pick up on)
If llvm is built with rtti
(REQUIRES_RTTI=1), then -fno-rtti is
removed from llvm-config --cppflags.
* We could selectively add / remove rtti
from various components, however mixing
rtti and non-rtti code is tricky and
could introduce missing symbols.
* This needs impact tested.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Matt Turner [Fri, 11 Oct 2013 04:00:08 +0000 (21:00 -0700)]
configure.ac: Don't check for awk, grep, nm.
Not used since
d53901c6.
Matt Turner [Fri, 11 Oct 2013 21:39:54 +0000 (14:39 -0700)]
configure.ac: Don't check for cross compiling.
Dead since
c845140a.
Matt Turner [Fri, 20 Sep 2013 02:48:22 +0000 (19:48 -0700)]
i965: Don't copy prop source mods into instructions that can't take them.
Constantin Baranov [Sat, 12 Oct 2013 22:17:15 +0000 (01:17 +0300)]
mesa: Add missing switch break in invalidate_framebuffer_storage()
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70411
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Grigori Goronzy [Sun, 13 Oct 2013 16:08:45 +0000 (18:08 +0200)]
st/vdpau: add format conversions for GetBitsYCbCr
Add simple plain C routines for NV12<->YV12 and YUYV<->UYVY
conversions. The NV12->YV12 conversion is commonly used, for instance
by VLC.
Reviewed-by: Christian König <christian.koenig@amd.com>
Grigori Goronzy [Sun, 13 Oct 2013 16:08:44 +0000 (18:08 +0200)]
radeon: use staging for mapping linear textures
Textures that likely reside in VRAM, are mapped for reading and
don't require direct mapping should be staged into GTT, to avoid bad
performance. This fixes readback performance of VDPAU surfaces.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Grigori Goronzy [Sun, 13 Oct 2013 16:08:43 +0000 (18:08 +0200)]
radeon/uvd: use PIPE_BIND_LINEAR for video surfaces
This new bind flag forces linear storage, but does not have other
side effects like R600_RESOURCE_FLAG_TRANSFER.
Reviewed-by: Christian König <christian.koenig@amd.com>
Vincent Lejeune [Sat, 5 Oct 2013 14:04:48 +0000 (16:04 +0200)]
radeonsi: Allow Sinking pass to move preloaded const/res/sampl
This fixes a crash in Unigine Heaven 3.0, and probably in some
others apps.
Vadim Girlin [Sun, 13 Oct 2013 15:53:54 +0000 (19:53 +0400)]
radeonsi: pass alpha_ref value to PS in the user sgpr
Currently it's hardcoded in the shader, so every change requires
compilation of the shader variant, killing the performance
in Serious Sam 3 and probably other apps.
This patch passes alpha_ref in the user sgpr and removes it from
the shader key.
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Vadim Girlin [Thu, 10 Oct 2013 04:09:37 +0000 (08:09 +0400)]
r600g: fix tgsi_op2_s with trans-only instructions
This fixes the issue when dst and src is the same reg and operation on one
channel overwrites the source for other channels, e.g.:
UMUL TEMP[2].xyz, TEMP[0].xyzz, TEMP[2].xxxx
In this example the result of the operation on channel x is written in
TEMP[2].x and then used as a second source operand for channels y and z
instead of original value in TEMP[2].x.
This patch stores the results in temp reg and moves them to
dst after performing operation on all channels.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=70327
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
Kenneth Graunke [Fri, 27 Sep 2013 23:11:36 +0000 (16:11 -0700)]
i965: Merge intel_context.h into brw_context.h.
v2: Keep the random 32-bit only version of memcpy, since Ian says I
can't delete it without data proving it isn't useful.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Fri, 27 Sep 2013 22:32:20 +0000 (15:32 -0700)]
i965: Delete our copy of likely/unlikely macros.
brw_context.h includes imports.h which includes compiler.h which already
defines these.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Mon, 8 Jul 2013 01:44:12 +0000 (18:44 -0700)]
mesa: Move U_FIXED/S_FIXED macros from i965 to macros.h.
These make it easy to convert a floating point value to a fixed point
numbers. The second parameter is the number of bits used for the
fractional part of the number.
It looks like core Mesa has similar functions already, but none that
allows an arbitrary number of fractional bits. The more generic version
is probably useful to everyone.
r600g apparently has an identical copy of the S_FIXED macro, but doesn't
include this file. I'm not sure what to do about that, so I'm just
going to leave it for now.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Mon, 8 Jul 2013 01:38:38 +0000 (18:38 -0700)]
mesa: Move ROUND_DOWN_TO() macro from i915/i965 to macros.h.
This seems generally useful, so it may as well live in core Mesa.
In fact, the comment for ALIGN() in macros.h actually says to "see also"
ROUND_DOWN_TO, which...was in a driver somewhere.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Fri, 27 Sep 2013 22:29:00 +0000 (15:29 -0700)]
i965: Move need_workaround_flush = true to intel_batchbuffer_init.
intel_batchbuffer_init() sets up initial batchbuffer state; it seems
like a reasonable place to initialize this flag.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Fri, 27 Sep 2013 22:00:22 +0000 (15:00 -0700)]
i965: Move DriverFlag initialization to brw_init_state().
Configuring which dirty flags we want sounds like a job for
brw_init_state().
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Fri, 27 Sep 2013 21:57:47 +0000 (14:57 -0700)]
i965: Merge intelInitContext into brwCreateContext.
The split here was completely arbitrary.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Fri, 27 Sep 2013 21:52:06 +0000 (14:52 -0700)]
i965: Move viewport driver hook setup to brw_init_driver_functions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>