OSDN Git Service
Maxim Galaganov [Fri, 3 Dec 2021 22:35:41 +0000 (14:35 -0800)]
mptcp: support TCP_CORK and TCP_NODELAY
First, add cork and nodelay fields to the mptcp_sock structure
so they can be used in sync_socket_options(), and fill them on setsockopt
while holding the msk socket lock.
Then, on setsockopt set proper tcp_sk(ssk)->nonagle values for subflows
by calling __tcp_sock_set_cork() or __tcp_sock_set_nodelay() on the ssk
while holding the ssk socket lock.
tcp_push_pending_frames() will be invoked on the ssk if a cork was cleared
or nodelay was set. Also set MPTCP_PUSH_PENDING bit by calling
mptcp_check_and_set_pending(). This will lead to __mptcp_push_pending()
being called inside mptcp_release_cb() with new tcp_sk(ssk)->nonagle.
Also add getsockopt support for TCP_CORK and TCP_NODELAY.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxim Galaganov [Fri, 3 Dec 2021 22:35:40 +0000 (14:35 -0800)]
mptcp: expose mptcp_check_and_set_pending
Expose the mptcp_check_and_set_pending() function for use inside MPTCP
sockopt code. The next patch will call it when TCP_CORK is cleared or
TCP_NODELAY is set on the MPTCP socket in order to push pending data
from mptcp_release_cb().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxim Galaganov [Fri, 3 Dec 2021 22:35:39 +0000 (14:35 -0800)]
tcp: expose __tcp_sock_set_cork and __tcp_sock_set_nodelay
Expose __tcp_sock_set_cork() and __tcp_sock_set_nodelay() for use in
MPTCP setsockopt code -- namely for syncing MPTCP socket options with
subflows inside sync_socket_options() while already holding the subflow
socket lock.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Fri, 3 Dec 2021 22:35:38 +0000 (14:35 -0800)]
selftests: mptcp: check IP_TOS in/out are the same
Check that getsockopt(IP_TOS) returns what setsockopt(IP_TOS) did set
right before.
Also check that socklen_t == 0 and -1 input values match those
of normal tcp sockets.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Fri, 3 Dec 2021 22:35:37 +0000 (14:35 -0800)]
mptcp: getsockopt: add support for IP_TOS
earlier patch added IP_TOS setsockopt support, this allows to get
the value set by earlier setsockopt.
Extends mptcp_put_int_option to handle u8 input/output by
adding required cast.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Fri, 3 Dec 2021 22:35:36 +0000 (14:35 -0800)]
mptcp: allow changing the "backup" bit by endpoint id
a non-zero 'id' is sufficient to identify MPTCP endpoints: allow changing
the value of 'backup' bit by simply specifying the endpoint id.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Fri, 3 Dec 2021 22:35:35 +0000 (14:35 -0800)]
selftests: mptcp: add inq test case
client & server use a unix socket connection to communicate
outside of the mptcp connection.
This allows the consumer to know in advance how many bytes have been
(or will be) sent by the peer.
This allows stricter checks on the bytecounts reported by TCP_INQ cmsg.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Fri, 3 Dec 2021 22:35:34 +0000 (14:35 -0800)]
mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls
Allows to query in-sequence data ready for read(), total bytes in
write queue and total bytes in write queue that have not yet been sent.
v2: remove unneeded READ_ONCE() (Paolo Abeni)
v3: check for new data unconditionally in SIOCINQ ioctl (Mat Martineau)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Fri, 3 Dec 2021 22:35:33 +0000 (14:35 -0800)]
selftests: mptcp: add TCP_INQ support
Do checks on the returned inq counter.
Fail on:
1. Huge value (> 1 kbyte, test case files are 1 kb)
2. last hint larger than returned bytes when read was short
3. erronenous indication of EOF.
3) happens when a hint of X bytes reads X-1 on next call
but next recvmsg returns more data (instead of EOF).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Fri, 3 Dec 2021 22:35:32 +0000 (14:35 -0800)]
mptcp: add TCP_INQ cmsg support
Support the TCP_INQ setsockopt.
This is a boolean that tells recvmsg path to include the remaining
in-sequence bytes in the cmsg data.
v2: do not use CB(skb)->offset, increment map_seq instead (Paolo Abeni)
v3: adjust CB(skb)->map_seq when taking skb from ofo queue (Paolo Abeni)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/224
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 7 Dec 2021 05:56:03 +0000 (21:56 -0800)]
vrf: use dev_replace_track() for better tracking
vrf_rt6_release() and vrf_rtable_release() changes dst->dev
Instead of
dev_hold(ndev);
dev_put(odev);
We should use
dev_replace_track(odev, ndev, &dst->dev_tracker, GFP_KERNEL);
If we do not transfer dst->dev_tracker to the new device,
we will get warnings from ref_tracker_dir_exit() when odev
is finally dismantled.
Fixes:
9038c320001d ("net: dst: add net device refcount tracking to dst_entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211207055603.1926372-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Lu [Fri, 3 Dec 2021 11:33:31 +0000 (12:33 +0100)]
net/smc: Clear memory when release and reuse buffer
Currently, buffers are cleared when smc connections are created and
buffers are reused. This slows down the speed of establishing new
connections. In most cases, the applications want to establish
connections as quickly as possible.
This patch moves memset() from connection creation path to release and
buffer unuse path, this trades off between speed of establishing and
release.
Test environments:
- CPU Intel Xeon Platinum 8 core, mem 32 GiB, nic Mellanox CX4
- socket sndbuf / rcvbuf: 16384 / 131072 bytes
- w/o first round, 5 rounds, avg, 100 conns batch per round
- smc_buf_create() use bpftrace kprobe, introduces extra latency
Latency benchmarks for smc_buf_create():
w/o patch : 19040.0 ns
w/ patch : 1932.6 ns
ratio : 10.2% (-89.8%)
Latency benchmarks for socket create and connect:
w/o patch : 143.3 us
w/ patch : 102.2 us
ratio : 71.3% (-28.7%)
The latency of establishing connections is reduced by 28.7%.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20211203113331.2818873-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangbin Huang [Sat, 4 Dec 2021 01:24:48 +0000 (09:24 +0800)]
Revert "net: hns3: add void before function which don't receive ret"
This reverts commit
5ac4f180bd07116c1e57858bc3f6741adbca3eb6.
Sorry for taking no notice that the function devlink_register() has been
already declared as void, so it is needs to revert this patch.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/20211204012448.51360-1-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
José Expósito [Sat, 4 Dec 2021 17:13:49 +0000 (18:13 +0100)]
net: prestera: replace zero-length array with flexible-array member
One-element and zero-length arrays are deprecated and should be
replaced with flexible-array members:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Replace zero-length array with flexible-array member and make use
of the struct_size() helper.
Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Tested-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211204171349.22776-1-jose.exposito89@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Sat, 4 Dec 2021 17:40:25 +0000 (18:40 +0100)]
net: wwan: iosm: select CONFIG_RELAY
The iosm driver started using relayfs, but is missing the Kconfig
logic to ensure it's built into the kernel:
x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_create_buf_file_handler':
iosm_ipc_trace.c:(.text+0x16): undefined reference to `relay_file_operations'
x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_subbuf_start_handler':
iosm_ipc_trace.c:(.text+0x31): undefined reference to `relay_buf_full'
x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_ctrl_file_write':
iosm_ipc_trace.c:(.text+0xd5): undefined reference to `relay_flush'
x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_port_rx':
Fixes:
00ef32565b9b ("net: wwan: iosm: device trace collection using relayfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Link: https://lore.kernel.org/r/20211204174033.950528-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sat, 4 Dec 2021 04:53:56 +0000 (20:53 -0800)]
net: fix recent csum changes
Vladimir reported csum issues after my recent change in skb_postpull_rcsum()
Issue here is the following:
initial skb->csum is the csum of
[part to be pulled][rest of packet]
Old code:
skb->csum = csum_sub(skb->csum, csum_partial(pull, pull_length, 0));
New code:
skb->csum = ~csum_partial(pull, pull_length, ~skb->csum);
This is broken if the csum of [pulled part]
happens to be equal to skb->csum, because end
result of skb->csum is 0 in new code, instead
of being 0xffffffff
David Laight suggested to use
skb->csum = -csum_partial(pull, pull_length, -skb->csum);
I based my patches on existing code present in include/net/seg6.h,
update_csum_diff4() and update_csum_diff16() which might need
a similar fix.
I guess that my tests, mostly pulling 40 bytes of IPv6 header
were not providing enough entropy to hit this bug.
v2: added wsum_negate() to make sparse happy.
Fixes:
29c3002644bd ("net: optimize skb_postpull_rcsum()")
Fixes:
0bd28476f636 ("gro: optimize skb_gro_postpull_rcsum()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Cc: David Lebrun <dlebrun@google.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211204045356.3659278-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 7 Dec 2021 00:06:03 +0000 (16:06 -0800)]
Merge branch 'net-add-preliminary-netdev-refcount-tracking'
Eric Dumazet says:
====================
net: add preliminary netdev refcount tracking
Two first patches add a generic infrastructure, that will be used
to get tracking of refcount increments/decrements.
The general idea is to be able to precisely pair each decrement with
a corresponding prior increment. Both share a cookie, basically
a pointer to private data storing stack traces.
The third patch adds dev_hold_track() and dev_put_track() helpers
(CONFIG_NET_DEV_REFCNT_TRACKER)
Then a series of 20 patches converts some dev_hold()/dev_put()
pairs to new hepers : dev_hold_track() and dev_put_track().
Hopefully this will be used by developpers and syzbot to
root cause bugs that cause netdevice dismantles freezes.
With CONFIG_PCPU_DEV_REFCNT=n option, we were able to detect
some class of bugs, but too late (when too many dev_put()
were happening).
Another series will be sent after this one is merged.
v3: moved NET_DEV_REFCNT_TRACKER to net/Kconfig.debug
added "depends on DEBUG_KERNEL && STACKTRACE_SUPPORT"
to hopefully get rid of kbuild reports for ARCH=nios2
Reworded patch 3 changelog.
Added missing htmldocs (Jakub)
v2: added four additional patches,
added netdev_tracker_alloc() and netdev_tracker_free()
addressed build error (kernel bots),
use GFP_ATOMIC in test_ref_tracker_timer_func()
====================
Link: https://lore.kernel.org/r/20211205042217.982127-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:17 +0000 (20:22 -0800)]
netpoll: add net device refcount tracker to struct netpoll
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:16 +0000 (20:22 -0800)]
ipmr, ip6mr: add net device refcount tracker to struct vif_device
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:15 +0000 (20:22 -0800)]
net: failover: add net device refcount tracker
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:14 +0000 (20:22 -0800)]
net: linkwatch: add net device refcount tracker
Add a netdevice_tracker inside struct net_device, to track
the self reference when a device is in lweventlist.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:13 +0000 (20:22 -0800)]
net/sched: add net device refcount tracker to struct Qdisc
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:12 +0000 (20:22 -0800)]
ipv4: add net device refcount tracker to struct in_device
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:11 +0000 (20:22 -0800)]
ipv6: add net device refcount tracker to struct inet6_dev
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:10 +0000 (20:22 -0800)]
net: add net device refcount tracker to struct netdev_adjacent
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:09 +0000 (20:22 -0800)]
net: add net device refcount tracker to struct neigh_parms
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:08 +0000 (20:22 -0800)]
net: add net device refcount tracker to struct pneigh_entry
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:07 +0000 (20:22 -0800)]
net: add net device refcount tracker to struct neighbour
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:06 +0000 (20:22 -0800)]
ipv6: add net device refcount tracker to struct ip6_tnl
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:05 +0000 (20:22 -0800)]
sit: add net device refcount tracking to ip_tunnel
Note that other ip_tunnel users do not seem to hold a reference
on tunnel->dev. Probably needs some investigations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:04 +0000 (20:22 -0800)]
ipv6: add net device refcount tracker to rt6_probe_deferred()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:03 +0000 (20:22 -0800)]
net: dst: add net device refcount tracking to dst_entry
We want to track all dev_hold()/dev_put() to ease leak hunting.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:02 +0000 (20:22 -0800)]
drop_monitor: add net device refcount tracker
We want to track all dev_hold()/dev_put() to ease leak hunting.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:01 +0000 (20:22 -0800)]
net: add net device refcount tracker to dev_ifsioc()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:22:00 +0000 (20:22 -0800)]
net: add net device refcount tracker to ethtool_phys_id()
This helper might hold a netdev reference for a long time,
lets add reference tracking.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:21:59 +0000 (20:21 -0800)]
net: add net device refcount tracker to struct netdev_queue
This will help debugging pesky netdev reference leaks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:21:58 +0000 (20:21 -0800)]
net: add net device refcount tracker to struct netdev_rx_queue
This helps debugging net device refcount leaks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:21:57 +0000 (20:21 -0800)]
net: add net device refcount tracker infrastructure
net device are refcounted. Over the years we had numerous bugs
caused by imbalanced dev_hold() and dev_put() calls.
The general idea is to be able to precisely pair each decrement with
a corresponding prior increment. Both share a cookie, basically
a pointer to private data storing stack traces.
This patch adds dev_hold_track() and dev_put_track().
To use these helpers, each data structure owning a refcount
should also use a "netdevice_tracker" to pair the hold and put.
netdevice_tracker dev_tracker;
...
dev_hold_track(dev, &dev_tracker, GFP_ATOMIC);
...
dev_put_track(dev, &dev_tracker);
Whenever a leak happens, we will get precise stack traces
of the point dev_hold_track() happened, at device dismantle phase.
We will also get a stack trace if too many dev_put_track() for the same
netdevice_tracker are attempted.
This is guarded by CONFIG_NET_DEV_REFCNT_TRACKER option.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:21:56 +0000 (20:21 -0800)]
lib: add tests for reference tracker
This module uses reference tracker, forcing two issues.
1) Double free of a tracker
2) leak of two trackers, one being allocated from softirq context.
"modprobe test_ref_tracker" would emit the following traces.
(Use scripts/decode_stacktrace.sh if necessary)
[ 171.648681] reference already released.
[ 171.653213] allocated in:
[ 171.656523] alloctest_ref_tracker_alloc2+0x1c/0x20 [test_ref_tracker]
[ 171.656526] init_module+0x86/0x1000 [test_ref_tracker]
[ 171.656528] do_one_initcall+0x9c/0x220
[ 171.656532] do_init_module+0x60/0x240
[ 171.656536] load_module+0x32b5/0x3610
[ 171.656538] __do_sys_init_module+0x148/0x1a0
[ 171.656540] __x64_sys_init_module+0x1d/0x20
[ 171.656542] do_syscall_64+0x4a/0xb0
[ 171.656546] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.656549] freed in:
[ 171.659520] alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659522] init_module+0xec/0x1000 [test_ref_tracker]
[ 171.659523] do_one_initcall+0x9c/0x220
[ 171.659525] do_init_module+0x60/0x240
[ 171.659527] load_module+0x32b5/0x3610
[ 171.659529] __do_sys_init_module+0x148/0x1a0
[ 171.659532] __x64_sys_init_module+0x1d/0x20
[ 171.659534] do_syscall_64+0x4a/0xb0
[ 171.659536] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659575] ------------[ cut here ]------------
[ 171.659576] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:112 ref_tracker_free+0x224/0x270
[ 171.659581] Modules linked in: test_ref_tracker(+)
[ 171.659591] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S 5.16.0-smp-DEV #290
[ 171.659595] RIP: 0010:ref_tracker_free+0x224/0x270
[ 171.659599] Code: 5e 41 5f 5d c3 48 c7 c7 04 9c 74 a6 31 c0 e8 62 ee 67 00 83 7b 14 00 75 1a 83 7b 18 00 75 30 4c 89 ff 4c 89 f6 e8 9c 00 69 00 <0f> 0b bb ea ff ff ff eb ae 48 c7 c7 3a 0a 77 a6 31 c0 e8 34 ee 67
[ 171.659601] RSP: 0018:
ffff89058ba0bbd0 EFLAGS:
00010286
[ 171.659603] RAX:
0000000000000029 RBX:
ffff890586b19780 RCX:
08895bff57c7d100
[ 171.659604] RDX:
c0000000ffff7fff RSI:
0000000000000282 RDI:
ffffffffc0407000
[ 171.659606] RBP:
ffff89058ba0bc88 R08:
0000000000000000 R09:
ffffffffa6f342e0
[ 171.659607] R10:
00000000ffff7fff R11:
0000000000000000 R12:
000000008f000000
[ 171.659608] R13:
0000000000000014 R14:
0000000000000282 R15:
ffffffffc0407000
[ 171.659609] FS:
00007f97ea29d740(0000) GS:
ffff8923ff940000(0000) knlGS:
0000000000000000
[ 171.659611] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 171.659613] CR2:
00007f97ea299000 CR3:
0000000186b4a004 CR4:
00000000001706e0
[ 171.659614] Call Trace:
[ 171.659615] <TASK>
[ 171.659631] ? alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659633] ? init_module+0x105/0x1000 [test_ref_tracker]
[ 171.659636] ? do_one_initcall+0x9c/0x220
[ 171.659638] ? do_init_module+0x60/0x240
[ 171.659641] ? load_module+0x32b5/0x3610
[ 171.659644] ? __do_sys_init_module+0x148/0x1a0
[ 171.659646] ? __x64_sys_init_module+0x1d/0x20
[ 171.659649] ? do_syscall_64+0x4a/0xb0
[ 171.659652] ? entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659656] ? 0xffffffffc040a000
[ 171.659658] alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659660] init_module+0x105/0x1000 [test_ref_tracker]
[ 171.659663] do_one_initcall+0x9c/0x220
[ 171.659666] do_init_module+0x60/0x240
[ 171.659669] load_module+0x32b5/0x3610
[ 171.659672] __do_sys_init_module+0x148/0x1a0
[ 171.659676] __x64_sys_init_module+0x1d/0x20
[ 171.659678] do_syscall_64+0x4a/0xb0
[ 171.659694] ? exc_page_fault+0x6e/0x140
[ 171.659696] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659698] RIP: 0033:0x7f97ea3dbe7a
[ 171.659700] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48
[ 171.659701] RSP: 002b:
00007ffea67ce608 EFLAGS:
00000246 ORIG_RAX:
00000000000000af
[ 171.659703] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f97ea3dbe7a
[ 171.659704] RDX:
00000000013a0ba0 RSI:
0000000000002808 RDI:
00007f97ea299000
[ 171.659705] RBP:
00007ffea67ce670 R08:
0000000000000003 R09:
0000000000000000
[ 171.659706] R10:
0000000000000000 R11:
0000000000000246 R12:
00000000013a1048
[ 171.659707] R13:
00000000013a0ba0 R14:
0000000001399930 R15:
00000000013a1030
[ 171.659709] </TASK>
[ 171.659710] ---[ end trace
f5dbd6afa41e60a9 ]---
[ 171.659712] leaked reference.
[ 171.663393] alloctest_ref_tracker_alloc0+0x1c/0x20 [test_ref_tracker]
[ 171.663395] test_ref_tracker_timer_func+0x9/0x20 [test_ref_tracker]
[ 171.663397] call_timer_fn+0x31/0x140
[ 171.663401] expire_timers+0x46/0x110
[ 171.663403] __run_timers+0x16f/0x1b0
[ 171.663404] run_timer_softirq+0x1d/0x40
[ 171.663406] __do_softirq+0x148/0x2d3
[ 171.663408] leaked reference.
[ 171.667101] alloctest_ref_tracker_alloc1+0x1c/0x20 [test_ref_tracker]
[ 171.667103] init_module+0x81/0x1000 [test_ref_tracker]
[ 171.667104] do_one_initcall+0x9c/0x220
[ 171.667106] do_init_module+0x60/0x240
[ 171.667108] load_module+0x32b5/0x3610
[ 171.667111] __do_sys_init_module+0x148/0x1a0
[ 171.667113] __x64_sys_init_module+0x1d/0x20
[ 171.667115] do_syscall_64+0x4a/0xb0
[ 171.667117] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.667131] ------------[ cut here ]------------
[ 171.667132] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:30 ref_tracker_dir_exit+0x104/0x130
[ 171.667136] Modules linked in: test_ref_tracker(+)
[ 171.667144] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S W 5.16.0-smp-DEV #290
[ 171.667147] RIP: 0010:ref_tracker_dir_exit+0x104/0x130
[ 171.667150] Code: 01 00 00 00 00 ad de 48 89 03 4c 89 63 08 48 89 df e8 20 a0 d5 ff 4c 89 f3 4d 39 ee 75 a8 4c 89 ff 48 8b 75 d0 e8 7c 05 69 00 <0f> 0b eb 0c 4c 89 ff 48 8b 75 d0 e8 6c 05 69 00 41 8b 47 08 83 f8
[ 171.667151] RSP: 0018:
ffff89058ba0bc68 EFLAGS:
00010286
[ 171.667154] RAX:
08895bff57c7d100 RBX:
ffffffffc0407010 RCX:
000000000000003b
[ 171.667156] RDX:
000000000000003c RSI:
0000000000000282 RDI:
ffffffffc0407000
[ 171.667157] RBP:
ffff89058ba0bc98 R08:
0000000000000000 R09:
ffffffffa6f342e0
[ 171.667159] R10:
00000000ffff7fff R11:
0000000000000000 R12:
dead000000000122
[ 171.667160] R13:
ffffffffc0407010 R14:
ffffffffc0407010 R15:
ffffffffc0407000
[ 171.667162] FS:
00007f97ea29d740(0000) GS:
ffff8923ff940000(0000) knlGS:
0000000000000000
[ 171.667164] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 171.667166] CR2:
00007f97ea299000 CR3:
0000000186b4a004 CR4:
00000000001706e0
[ 171.667169] Call Trace:
[ 171.667170] <TASK>
[ 171.667171] ? 0xffffffffc040a000
[ 171.667173] init_module+0x126/0x1000 [test_ref_tracker]
[ 171.667175] do_one_initcall+0x9c/0x220
[ 171.667179] do_init_module+0x60/0x240
[ 171.667182] load_module+0x32b5/0x3610
[ 171.667186] __do_sys_init_module+0x148/0x1a0
[ 171.667189] __x64_sys_init_module+0x1d/0x20
[ 171.667192] do_syscall_64+0x4a/0xb0
[ 171.667194] ? exc_page_fault+0x6e/0x140
[ 171.667196] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.667199] RIP: 0033:0x7f97ea3dbe7a
[ 171.667200] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48
[ 171.667201] RSP: 002b:
00007ffea67ce608 EFLAGS:
00000246 ORIG_RAX:
00000000000000af
[ 171.667203] RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f97ea3dbe7a
[ 171.667204] RDX:
00000000013a0ba0 RSI:
0000000000002808 RDI:
00007f97ea299000
[ 171.667205] RBP:
00007ffea67ce670 R08:
0000000000000003 R09:
0000000000000000
[ 171.667206] R10:
0000000000000000 R11:
0000000000000246 R12:
00000000013a1048
[ 171.667207] R13:
00000000013a0ba0 R14:
0000000001399930 R15:
00000000013a1030
[ 171.667209] </TASK>
[ 171.667210] ---[ end trace
f5dbd6afa41e60aa ]---
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 5 Dec 2021 04:21:55 +0000 (20:21 -0800)]
lib: add reference counting tracking infrastructure
It can be hard to track where references are taken and released.
In networking, we have annoying issues at device or netns dismantles,
and we had various proposals to ease root causing them.
This patch adds new infrastructure pairing refcount increases
and decreases. This will self document code, because programmers
will have to associate increments/decrements.
This is controled by CONFIG_REF_TRACKER which can be selected
by users of this feature.
This adds both cpu and memory costs, and thus should probably be
used with care.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 4 Dec 2021 02:24:23 +0000 (18:24 -0800)]
Merge branch 'qed-enhancements'
Manish Chopra says:
====================
qed*: enhancements
This series adds below enhancements for qed/qede drivers
patch 1: Improves tx timeout debug data logs.
patch 2: Add ESL(Enhanced system lockdown) priv flag cap/status support.
v2:
* Fixed cosmetic issues in both patches
* Added ESL feature description in patch #2
Please consider applying it to "net-next"
====================
Link: https://lore.kernel.org/r/20211202210157.25530-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manish Chopra [Thu, 2 Dec 2021 21:01:57 +0000 (13:01 -0800)]
qed*: esl priv flag support through ethtool
ESL(Enhanced System Lockdown) was designed to lock PCI adapter firmware
images and prevent changes to critical non-volatile configuration data
so that uncontrolled, malicious or unintentional modification to the
adapters are avoided, ensuring it's operational state. Once this feature is
enabled, the device is locked, rejecting any modification to non-volatile
images. Once unlocked, the protection is off such that firmware and
non-volatile configurations may be altered.
Driver just reflects the capability and status of this through
the ethtool private flag.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manish Chopra [Thu, 2 Dec 2021 21:01:56 +0000 (13:01 -0800)]
qed*: enhance tx timeout debug info
This patch add some new qed APIs to query status block
info and report various data to MFW on tx timeout event
Along with that it enhances qede to dump more debug logs
(not just specific to the queue which was reported by stack)
on tx timeout which includes various other basic metadata about
all tx queues and other info (like status block etc.)
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Fri, 3 Dec 2021 09:55:31 +0000 (12:55 +0300)]
net: lan966x: fix a IS_ERR() vs NULL check in lan966x_create_targets()
The devm_ioremap() function does not return error pointers. It returns
NULL.
Fixes:
db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Fri, 3 Dec 2021 07:04:18 +0000 (15:04 +0800)]
net: prestera: acl: fix return value check in prestera_acl_rule_entry_find()
rhashtable_lookup_fast() returns NULL pointer not ERR_PTR().
Return rhashtable_lookup_fast() directly to fix this.
Fixes:
47327e198d42 ("net: prestera: acl: migrate to new vTCAM api")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Thu, 2 Dec 2021 21:00:29 +0000 (23:00 +0200)]
net: dsa: vsc73xxx: Get rid of duplicate of_node assignment
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.
For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Mi [Wed, 1 Dec 2021 13:31:53 +0000 (15:31 +0200)]
net/sched: act_ct: Offload only ASSURED connections
Short-lived connections increase the insertion rate requirements,
fill the offload table and provide very limited offload value since
they process a very small amount of packets. The ct ASSURED flag is
designed to filter short-lived connections for early expiration.
Offload connections when they are ESTABLISHED and ASSURED.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 3 Dec 2021 11:01:00 +0000 (11:01 +0000)]
Merge branch 'hns3-cleanups'
Guangbin Huang says:
====================
net: hns3: some cleanups for -next
To improve code readability and simplicity, this series add some cleanup
patches for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Fri, 3 Dec 2021 09:20:59 +0000 (17:20 +0800)]
net: hns3: fix hns3 driver header file not self-contained issue
The hns3 driver header file uses the structure of other files, but does
not include corresponding file, which causes a check warning that the
header file is not self-contained.
Therefore, the required header file is included in the header file, and
the structure declaration is added to the header file to avoid cyclic
dependency of the header file.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Fri, 3 Dec 2021 09:20:58 +0000 (17:20 +0800)]
net: hns3: replace one tab with space in for statement
Replace one tab with space between symbol ')' and '{' in for statement of
function hclge_map_tqp().
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Fri, 3 Dec 2021 09:20:57 +0000 (17:20 +0800)]
net: hns3: remove rebundant line for hclge_dbg_dump_tm_pg()
Return value judgment should follow the function call, so remove line
between them.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Fri, 3 Dec 2021 09:20:56 +0000 (17:20 +0800)]
net: hns3: add comments for hclge_dbg_fill_content()
When we use hclge_dbg_fill_content() to fill contents with
specific format according to struct hclge_dbg_item *items,
it may cause content cover due to unreasonable items.
So add comments to explain how to avoid it.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Fri, 3 Dec 2021 09:20:55 +0000 (17:20 +0800)]
net: hns3: add void before function which don't receive ret
Add void before function which don't receive ret to improve code
readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Fri, 3 Dec 2021 09:20:54 +0000 (17:20 +0800)]
net: hns3: align return value type of atomic_read() with its output
Change output value type of atomic_read() from %u to %d.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Fri, 3 Dec 2021 09:20:53 +0000 (17:20 +0800)]
net: hns3: modify one argument type of function hclge_ncl_config_data_print
The argument len will not be changed in hclge_ncl_config_data_print(), it
is no need to declare as a pointer, so modify it into int type.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Fri, 3 Dec 2021 09:20:52 +0000 (17:20 +0800)]
net: hns3: Align type of some variables with their print type
The c language has a set of implicit type conversions, when
two variables perform bitwise or arithmetic operations.
For example, variable A (type u16/u8) -1, its output is int type variable.
u16/u8 will convert to int type implicitly before it does arithmetic
operations. So, change 1 to unsigned type.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Fri, 3 Dec 2021 09:20:51 +0000 (17:20 +0800)]
net: hns3: add print vport id for failed message of vlan
This patch adds print vport id when failed to get or set vlan
filter parameters.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Fri, 3 Dec 2021 09:20:50 +0000 (17:20 +0800)]
net: hns3: refactor function hclge_set_vlan_filter_hw
Function hclge_set_vlan_filter_hw() is a bit too long, so add a new
function hclge_need_update_port_vlan() to simplify code and improve
code readability.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Fri, 3 Dec 2021 09:20:49 +0000 (17:20 +0800)]
net: hns3: optimize function hclge_cfg_common_loopback()
hclge_cfg_common_loopback() is a bit too long, so
encapsulate hclge_cfg_common_loopback_cmd_send() and
hclge_cfg_common_loopback_wait() two functions to
improve readability.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Dec 2021 03:00:17 +0000 (19:00 -0800)]
Merge tag 'mlx5-updates-2021-12-02' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-12-02
Misc updates to mlx5 driver
1) Various code cleanups
2) Error path handling fixes of latest features
3) Print more information on pci error handling
4) Dynamically resize flow counters query buffer
====================
Link: https://lore.kernel.org/r/20211203005622.183325-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avihai Horon [Thu, 28 Oct 2021 13:03:06 +0000 (16:03 +0300)]
net/mlx5: Dynamically resize flow counters query buffer
The flow counters bulk query buffer is allocated once during
mlx5_fc_init_stats(). For PFs and VFs this buffer usually takes a little
more than 512KB of memory, which is aligned to the next power of 2, to
1MB. For SFs, this buffer is reduced and takes around 128 Bytes.
The buffer size determines the maximum number of flow counters that
can be queried at a time. Thus, having a bigger buffer can improve
performance for users that need to query many flow counters.
There are cases that don't use many flow counters and don't need a big
buffer (e.g. SFs, VFs). Since this size is critical with large scale,
in these cases the buffer size should be reduced.
In order to reduce memory consumption while maintaining query
performance, change the query buffer's allocation scheme to the
following:
- First allocate the buffer with small initial size.
- If the number of counters surpasses the initial size, resize the
buffer to the maximum size.
The buffer only grows and isn't shrank, because users with many flow
counters don't care about the buffer size and we don't want to add
resize overhead if the current number of counters drops.
This solution is preferable to the current one, which is less accurate
and only addresses SFs.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 9 Nov 2021 12:07:49 +0000 (14:07 +0200)]
net/mlx5e: TC, Set flow attr ip_version earlier
Setting flow attr ip_version is not related to parsing tc flow actions.
It needs to be set after parsing flower matches which changes the spec.
So move it outside parse_tc_fdb_actions() and set it in
__mlx5e_add_fdb_flow().
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Thu, 28 Oct 2021 12:50:49 +0000 (15:50 +0300)]
net/mlx5e: TC, Move common flow_action checks into function
Remove duplicate checks on flow_action by using common function.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 3 Aug 2021 12:14:55 +0000 (15:14 +0300)]
net/mlx5e: Remove redundant actions arg from vlan push/pop funcs
Passing actions is redundant and can be retrieved from flow attr.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 3 Aug 2021 11:50:42 +0000 (14:50 +0300)]
net/mlx5e: Remove redundant actions arg from validate_goto_chain()
Passing actions is redundant and can be retrieved from flow.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Tue, 26 Oct 2021 08:19:39 +0000 (11:19 +0300)]
net/mlx5e: TC, Remove redundant action stack var
Remove the action stack var from parse tc fdb actions
and prase tc nic actions, use the flow attr action var directly.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Sun, 12 Sep 2021 13:12:05 +0000 (16:12 +0300)]
net/mlx5e: Hide function mlx5e_num_channels_changed
No calls for mlx5e_num_channels_changed() out of en_main.c,
turn it static and remove from header.
Keep the wrapper function mlx5e_num_channels_changed_ctx exposed.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Ben Ben-Ishay [Wed, 10 Nov 2021 16:10:44 +0000 (18:10 +0200)]
net/mlx5e: SHAMPO, clean MLX5E_MAX_KLM_PER_WQE macro
This commit reduces unused variable from MLX5E_MAX_KLM_PER_WQE macro that
introduced by commit
d7b896acbdcb ("net/mlx5e: Add support to klm_umr_wqe").
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed [Tue, 5 Oct 2021 01:39:51 +0000 (18:39 -0700)]
net/mlx5: Print more info on pci error handlers
In case mlx5_pci_err_detected was called with state equals to
pci_channel_io_perm_failure, the driver will never come back up.
It is nice to know why the driver went to zombie land, so print some
useful information on pci err handlers.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Dan Carpenter [Sat, 27 Nov 2021 14:19:53 +0000 (17:19 +0300)]
net/mlx5: SF, silence an uninitialized variable warning
This code sometimes calls mlx5_sf_hw_table_hwc_init() when "ext_base_id"
is uninitialized. It's not used on that path, but it generates a static
checker warning to pass uninitialized variables to another function.
It may also generate runtime UBSan warnings depending on if the
mlx5_sf_hw_table_hwc_init() function is inlined or not.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Christophe JAILLET [Sat, 6 Nov 2021 17:08:11 +0000 (18:08 +0100)]
net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
All the error handling paths of 'mlx5e_tc_add_fdb_flow()' end to 'err_out'
where 'flow_flag_set(flow, FAILED);' is called.
All but the new error handling paths added by the commits given in the
Fixes tag below.
Fix these error handling paths and branch to 'err_out'.
Fixes:
166f431ec6be ("net/mlx5e: Add indirect tc offload of ovs internal port")
Fixes:
b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Wei Yongjun [Tue, 23 Nov 2021 08:36:16 +0000 (08:36 +0000)]
net/mlx5: Fix error return code in esw_qos_create()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
85c5f7c9200e ("net/mlx5: E-switch, Create QoS on demand")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Arnd Bergmann [Mon, 8 Nov 2021 11:10:33 +0000 (12:10 +0100)]
mlx5: fix mlx5i_grp_sw_update_stats() stack usage
The mlx5e_sw_stats structure has grown to the point of triggering
a warning when put on the stack of a function:
mlx5/core/ipoib/ipoib.c: In function 'mlx5i_grp_sw_update_stats':
mlx5/core/ipoib/ipoib.c:136:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
In this case, only five of the structure members are actually set,
so it's sufficient to have those as separate local variables.
As en_rep.c uses 'struct rtnl_link_stats64' for this, just use
the same one here for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Arnd Bergmann [Mon, 8 Nov 2021 11:10:32 +0000 (12:10 +0100)]
mlx5: fix psample_sample_packet link error
When PSAMPLE is a loadable module, built-in drivers cannot use it:
aarch64-linux-ld: drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.o: in function `mlx5e_tc_sample_skb':
sample.c:(.text+0xd68): undefined reference to `psample_sample_packet'
Add the same dependency here that is used for MLXSW
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jakub Kicinski [Thu, 2 Dec 2021 19:44:56 +0000 (11:44 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 2 Dec 2021 19:22:06 +0000 (11:22 -0800)]
Merge tag 'net-5.16-rc4' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and wireguard.
Mostly scattered driver changes this week, with one big clump in
mv88e6xxx. Nothing of note, really.
Current release - regressions:
- smc: keep smc_close_final()'s error code during active close
Current release - new code bugs:
- iwlwifi: various static checker fixes (int overflow, leaks, missing
error codes)
- rtw89: fix size of firmware header before transfer, avoid crash
- mt76: fix timestamp check in tx_status; fix pktid leak;
- mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set()
Previous releases - regressions:
- smc: fix list corruption in smc_lgr_cleanup_early
- ipv4: convert fib_num_tclassid_users to atomic_t
Previous releases - always broken:
- tls: fix authentication failure in CCM mode
- vrf: reset IPCB/IP6CB when processing outbound pkts, prevent
incorrect processing
- dsa: mv88e6xxx: fixes for various device errata
- rds: correct socket tunable error in rds_tcp_tune()
- ipv6: fix memory leak in fib6_rule_suppress
- wireguard: reset peer src endpoint when netns exits
- wireguard: improve resilience to DoS around incoming handshakes
- tcp: fix page frag corruption on page fault which involves TCP
- mpls: fix missing attributes in delete notifications
- mt7915: fix NULL pointer dereference with ad-hoc mode
Misc:
- rt2x00: be more lenient about EPROTO errors during start
- mlx4_en: update reported link modes for 1/10G"
* tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: dsa: b53: Add SPI ID table
gro: Fix inconsistent indenting
selftests: net: Correct case name
net/rds: correct socket tunable error in rds_tcp_tune()
mctp: Don't let RTM_DELROUTE delete local routes
net/smc: Keep smc_close_final rc during active close
ibmvnic: drop bad optimization in reuse_tx_pools()
ibmvnic: drop bad optimization in reuse_rx_pools()
net/smc: fix wrong list_del in smc_lgr_cleanup_early
Fix Comment of ETH_P_802_3_MIN
ethernet: aquantia: Try MAC address from device tree
ipv4: convert fib_num_tclassid_users to atomic_t
net: avoid uninit-value from tcp_conn_request
net: annotate data-races on txq->xmit_lock_owner
octeontx2-af: Fix a memleak bug in rvu_mbox_init()
net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
...
Linus Torvalds [Thu, 2 Dec 2021 19:07:41 +0000 (11:07 -0800)]
Merge tag 'trace-v5.16-rc3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three tracing fixes:
- Allow compares of strings when using signed and unsigned characters
- Fix kmemleak false positive for histogram entries
- Handle negative numbers for user defined kretprobe data sizes"
* tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kprobes: Limit max data_size of the kretprobe instances
tracing: Fix a kmemleak false positive in tracing_map
tracing/histograms: String compares should not care about signed values
Linus Torvalds [Thu, 2 Dec 2021 18:56:16 +0000 (10:56 -0800)]
Merge tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Some changes that went in 5.16 had issues. When working on the design
a piece was redesigned and things got missed. And the message type was
not being initialized when it was allocated, resulting in crashes.
In addition, the IPMI driver has had a shutdown issue where it could
still have an item in a system workqueue after it had been shutdown.
Move to a private workqueue to avoid that problem"
* tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi:
ipmi:ipmb: Fix unknown command response
ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking
ipmi: fix oob access due to uninit smi_msg type
ipmi: msghandler: Make symbol 'remove_work_wq' static
ipmi: Move remove_work to dedicated workqueue
Li Zhijian [Thu, 2 Dec 2021 02:29:53 +0000 (10:29 +0800)]
selftests: net: remove meaningless help option
$ ./fcnal-test.sh -t help
Test names: help
Looks it intent to list the available tests but it didn't do the right
thing. I will add another option the do that in the later patch.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xu Wang [Thu, 2 Dec 2021 07:55:35 +0000 (07:55 +0000)]
mctp: Remove redundant if statements
The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xu Wang [Thu, 2 Dec 2021 07:51:48 +0000 (07:51 +0000)]
net: openvswitch: Remove redundant if statements
The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xu Wang [Thu, 2 Dec 2021 07:53:59 +0000 (07:53 +0000)]
ipvlan: Remove redundant if statements
The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 2 Dec 2021 04:17:20 +0000 (20:17 -0800)]
net: dsa: b53: Add SPI ID table
Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.
Fixes:
96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Thu, 2 Dec 2021 08:15:11 +0000 (09:15 +0100)]
net: lan966x: Fix builds for lan966x driver
The lan966x is using the function 'packing' to create/extract the
information for the IFH, that is used to be added in front of the frames
when they are injected/extracted.
Therefore update the Kconfig to select config option 'PACKING' whenever
lan966x driver is enabled.
Fixes:
db8bcaad539314 ("net: lan966x: add the basic lan966x driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Thu, 2 Dec 2021 11:05:04 +0000 (12:05 +0100)]
dt-bindings: net: lan966x: Add additional properties for lan966x
This patch updates the dt-bindings for lan966x switch.
It adds the properties 'additionalProperties' and
'unevaluatedProperties' for ethernet-ports and ports nodes. In this way
it is not possible to add more properties to these nodes.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prabhakar Kushwaha [Thu, 2 Dec 2021 10:41:56 +0000 (10:41 +0000)]
qed: Enhance rammod debug prints to provide pretty details
Instead of printing numbers of protocol IDs and rammod commands,
enhance debug prints to provide names. s_protocol_types[] and
s_ramrod_cmd_ids arrays[] are added to support along with APIs.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiapeng Chong [Thu, 2 Dec 2021 08:30:42 +0000 (16:30 +0800)]
gro: Fix inconsistent indenting
Eliminate the follow smatch warning:
net/ipv6/ip6_offload.c:249 ipv6_gro_receive() warn: inconsistent
indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zhijian [Thu, 2 Dec 2021 02:28:41 +0000 (10:28 +0800)]
selftests: net: Correct case name
ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names
Fixes:
34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Fixes:
75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Wed, 1 Dec 2021 14:53:51 +0000 (15:53 +0100)]
net: lan966x: Fix duplicate check in frame extraction
The blamed commit generates the following smatch static checker warning:
drivers/net/ethernet/microchip/lan966x/lan966x_main.c:515 lan966x_xtr_irq_handler()
warn: duplicate check 'sz < 0' (previous on line 502)
This patch fixes this issue removing the duplicate check 'sz < 0'
Fixes:
d28d6d2e37d10d ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Kucharski [Wed, 1 Dec 2021 14:45:22 +0000 (07:45 -0700)]
net/rds: correct socket tunable error in rds_tcp_tune()
Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would
instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched.
Fixes:
c6a58ffed536 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Johnston [Wed, 1 Dec 2021 08:07:42 +0000 (16:07 +0800)]
mctp: Don't let RTM_DELROUTE delete local routes
We need to test against the existing route type, not
the rtm_type in the netlink request.
Fixes:
83f0a0b7285b ("mctp: Specify route types, require rtm_type in RTM_*ROUTE messages")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lu [Wed, 1 Dec 2021 06:42:16 +0000 (14:42 +0800)]
net/smc: Keep smc_close_final rc during active close
When smc_close_final() returns error, the return code overwrites by
kernel_sock_shutdown() in smc_close_active(). The return code of
smc_close_final() is more important than kernel_sock_shutdown(), and it
will pass to userspace directly.
Fix it by keeping both return codes, if smc_close_final() raises an
error, return it or kernel_sock_shutdown()'s.
Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes:
606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 1 Dec 2021 05:48:36 +0000 (21:48 -0800)]
ibmvnic: drop bad optimization in reuse_tx_pools()
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes:
bbd809305bc7 ("ibmvnic: Reuse tx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 1 Dec 2021 05:48:35 +0000 (21:48 -0800)]
ibmvnic: drop bad optimization in reuse_rx_pools()
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes:
489de956e7a2 ("ibmvnic: Reuse rx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dust Li [Wed, 1 Dec 2021 03:02:30 +0000 (11:02 +0800)]
net/smc: fix wrong list_del in smc_lgr_cleanup_early
smc_lgr_cleanup_early() meant to delete the link
group from the link group list, but it deleted
the list head by mistake.
This may cause memory corruption since we didn't
remove the real link group from the list and later
memseted the link group structure.
We got a list corruption panic when testing:
[ 231.277259] list_del corruption. prev->next should be
ffff8881398a8000, but was
0000000000000000
[ 231.278222] ------------[ cut here ]------------
[ 231.278726] kernel BUG at lib/list_debug.c:53!
[ 231.279326] invalid opcode: 0000 [#1] SMP NOPTI
[ 231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435
[ 231.280466] Hardware name: Alibaba Cloud ECS, BIOS
8c24b4c 04/01/2014
[ 231.281248] Workqueue: events smc_link_down_work
[ 231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90
[ 231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c
60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f>
0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc
[ 231.284146] RSP: 0018:
ffffc90000033d58 EFLAGS:
00010292
[ 231.284685] RAX:
0000000000000054 RBX:
ffff8881398a8000 RCX:
0000000000000000
[ 231.285415] RDX:
0000000000000001 RSI:
ffff88813bc18040 RDI:
ffff88813bc18040
[ 231.286141] RBP:
ffffffff8305ad40 R08:
0000000000000003 R09:
0000000000000001
[ 231.286873] R10:
ffffffff82803da0 R11:
ffffc90000033b90 R12:
0000000000000001
[ 231.287606] R13:
0000000000000000 R14:
ffff8881398a8000 R15:
0000000000000003
[ 231.288337] FS:
0000000000000000(0000) GS:
ffff88813bc00000(0000) knlGS:
0000000000000000
[ 231.289160] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 231.289754] CR2:
0000000000e72058 CR3:
000000010fa96006 CR4:
00000000003706f0
[ 231.290485] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 231.291211] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 231.291940] Call Trace:
[ 231.292211] smc_lgr_terminate_sched+0x53/0xa0
[ 231.292677] smc_switch_conns+0x75/0x6b0
[ 231.293085] ? update_load_avg+0x1a6/0x590
[ 231.293517] ? ttwu_do_wakeup+0x17/0x150
[ 231.293907] ? update_load_avg+0x1a6/0x590
[ 231.294317] ? newidle_balance+0xca/0x3d0
[ 231.294716] smcr_link_down+0x50/0x1a0
[ 231.295090] ? __wake_up_common_lock+0x77/0x90
[ 231.295534] smc_link_down_work+0x46/0x60
[ 231.295933] process_one_work+0x18b/0x350
Fixes:
a0a62ee15a829 ("net/smc: separate locks for SMCD and SMCR link group lists")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiayu Zhang [Wed, 1 Dec 2021 02:57:13 +0000 (10:57 +0800)]
Fix Comment of ETH_P_802_3_MIN
The description of ETH_P_802_3_MIN is misleading.
The value of EthernetType in Ethernet II frame is more than 0x0600,
the value of Length in 802.3 frame is less than 0x0600.
Signed-off-by: Xiayu Zhang <Xiayu.Zhang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tianhao Chai [Wed, 1 Dec 2021 02:57:06 +0000 (20:57 -0600)]
ethernet: aquantia: Try MAC address from device tree
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the
card, but instead need to obtain MAC addresses from the device tree. In
this case the hardware will report an invalid MAC.
Currently atlantic driver does not query the DT for MAC address and will
randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in.
This patch causes the driver to perfer a valid MAC address from OF (if
present) over HW self-reported MAC and only fall back to a random MAC
address when neither of them is valid.
Signed-off-by: Tianhao Chai <cth451@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Tue, 30 Nov 2021 21:16:25 +0000 (22:16 +0100)]
dt-bindings: net: dsa: qca8k: improve port definition documentation
Clean and improve port definition for qca8k documentation by referencing
the dsa generic port definition and adding the additional specific port
definition.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Tue, 30 Nov 2021 21:16:24 +0000 (22:16 +0100)]
dt-bindings: net: dsa: split generic port definition from dsa.yaml
Some switch may require to add additional binding to the node port.
Move DSA generic port definition to a dedicated yaml to permit this.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 2 Dec 2021 02:26:35 +0000 (18:26 -0800)]
ipv4: convert fib_num_tclassid_users to atomic_t
Before commit
faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
changes to net->ipv4.fib_num_tclassid_users were protected by RTNL.
After the change, this is no longer the case, as free_fib_info_rcu()
runs after rcu grace period, without rtnl being held.
Fixes:
faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>