OSDN Git Service
Francisco Jerez [Wed, 7 Oct 2015 11:44:02 +0000 (14:44 +0300)]
drm/i915: Hook up ring workaround writes at context creation time on Gen6-7.
intel_rcs_ctx_init() emits all workaround register writes on the list
to the ring, in addition to calling i915_gem_render_state_init(). The
workaround list is currently empty on Gen6-7 so this shouldn't cause
any functional changes.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Francisco Jerez [Wed, 7 Oct 2015 11:44:01 +0000 (14:44 +0300)]
drm/i915: Don't warn if the workaround list is empty.
It's not an error for the workaround list to be empty if no
workarounds are needed. This will avoid spamming the logs
unnecessarily on Gen6 after the workaround list is hooked up on
pre-Gen8 hardware by the following commits.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 1 Oct 2015 16:06:50 +0000 (18:06 +0200)]
drm/i915: Resurrect golden context on gen6/7
In
commit
8f0e2b9d95a88ca5d8349deef2375644faf184ae
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 2 16:19:07 2014 +0100
drm/i915: Move golden context init into ->init_context
I've shuffled around per-ctx init code a bit for legacy contexts but
accidentally dropped the render state init call on gen6/7. Resurrect
it.
Reported-by: Francisco Jerez <currojerez@riseup.net>
Cc: Francisco Jerez <currojerez@riseup.net>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 7 Oct 2015 08:17:46 +0000 (11:17 +0300)]
drm/i915/chv: remove pre-production hardware workarounds
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Appease gcc and remove the unused variable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 7 Oct 2015 08:17:44 +0000 (11:17 +0300)]
drm/i915/snb: remove pre-production hardware workaround
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Akash Goel [Fri, 18 Sep 2015 18:09:51 +0000 (23:39 +0530)]
drm/i915/bxt: Set time interval unit to 0.833us
Note that in Bspec you have to dig around in a section called
"Timestamp bases" and Bspec update request is filed.
Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Add note about state of Bspec.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 6 Oct 2015 10:39:55 +0000 (11:39 +0100)]
drm/i915: Kill DRI1 cliprects
Passing cliprects into the kernel for it to re-execute the batch buffer
with different CMD_DRAWRECT died out long ago. As DRI1 support has been
removed from the kernel, we can now simply reject any execbuf trying to
use this "feature".
To keep Daniel happy with the prospect of being able to reuse these
fields in the next decade, continue to ensure that current userspace is
not passing garbage in through the dead fields.
v2: Fix the cliprects_ptr check
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:18:29 +0000 (12:18 +0100)]
drm/i915: Avoid GPU stalls from kswapd
Exclude active GPU pages from the purview of the background shrinker
(kswapd), as these cause uncontrollable GPU stalls. Given that the
shrinker is rerun until the freelists are satisfied, we should have
opportunity in subsequent passes to recover the pages once idle. If the
machine does run out of memory entirely, we have the forced idling in the
oom-notifier as a means of releasing all the pages we can before an oom
is prematurely executed.
Note that this relies upon an up-front retire_requests to keep the
inactive list in shape, which was added in a previous patch, mostly as
execlist ctx pinning band-aids.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Add note about retire_requests.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:18:28 +0000 (12:18 +0100)]
drm/i915: Remove dead i915_gem_evict_everything()
With UMS gone, we no longer use it during suspend. And with the last
user removed from the shrinker, we can remove the dead code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:18:27 +0000 (12:18 +0100)]
drm/i915: During shrink_all we only need to idle the GPU
We can forgo an evict-everything here as the shrinker operation itself
will unbind any vma as required. If we explicitly idle the GPU through a
switch to the default context, we not only create a request in an
illegal context (e.g. whilst shrinking during execbuf with a request
already allocated), but switching to the default context will not free
up the memory backing the active contexts - unless in the unlikely
situation that context had already been closed (and just kept arrive by
being the current context). The saving is near zero and the danger real.
To compensate for the loss of the forced retire, add a couple of
retire-requests to i915_gem_shirnk() - this should help free up any
transitive cache from the requests.
Note that the second retire_requests is for the benefit of the
hand-rolled execlist ctx active tracking: We need to manually kick
requests to get those unpinned again. Once that's fixed we can try to
remove this again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add summary of why we need a pile of retire_requests.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:18:26 +0000 (12:18 +0100)]
drm/i915: Add a tracepoint for the shrinker
Often it is very useful to know why we suddenly purge vast tracts of
memory and surprisingly up until now we didn't even have a tracepoint
for when we shrink our memory.
Note that there are slab_start/end tracepoints already, but those
don't cover the internal recursion when we directly call into our
shrinker code. Hence a separate tracepoint seems justified. Also note
that we don't really need a separate tracepoint for the actual amount
of pages freed since we already have an unbind tracpoint for that.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add a note that there's also slab_start/end and why they're
insufficient.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Libin Yang [Thu, 1 Oct 2015 09:01:09 +0000 (17:01 +0800)]
drm/i915: DocBook add i915_component.h support
Add the item of i915_component.h in DocBook and add the DOC for
i915_component.h. Explain the struct i915_audio_component_ops and
struct i915_audio_component_audio_ops usage.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Libin Yang [Thu, 1 Oct 2015 09:01:08 +0000 (17:01 +0800)]
drm/i915: add kerneldoc for i915_audio_component
Add the kerneldoc for i915_audio_component in i915_component.h
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 7 Oct 2015 13:34:15 +0000 (15:34 +0200)]
Merge remote-tracking branch 'takashi/topic/drm-sync-audio-rate' into drm-intel-next-queued
Pull in the i915/hda changes for N/CTS setting so I can apply the
follow-up documentation work for drm/i915.
Some conflicts because ofc we had to rework i915 while that N/CTS work
was going on. But not more than adjacent changes really.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Thu, 1 Oct 2015 11:18:25 +0000 (12:18 +0100)]
drm/i915: shrinker_control->nr_to_scan is now unsigned long
As the shrinker_control now passes us unsigned long targets, update our
shrinker functions to match.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 6 Oct 2015 12:47:55 +0000 (14:47 +0200)]
drm/i915: Fix kerneldoc for i915_gem_shrink_all
I've botched this, so let's fix it.
Botched in
commit
eb0b44adc08c0be01a027eb009e9cdadc31e65a2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Mar 18 14:47:59 2015 +0100
drm/i915: kerneldoc for i915_gem_shrinker.c
v2: Be a good citizen^Wmaintainer and add the proper commit citation.
Noticed by Jani.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Thu, 1 Oct 2015 11:34:47 +0000 (12:34 +0100)]
drm/i915: Use a task to cancel the userptr on invalidate_range
Whilst discussing possible ways to trigger an invalidate_range on a
userptr with an aliased GGTT mmapping (and so cause a struct_mutex
deadlock), the conclusion is that we can, and we must, prevent any
possible deadlock by avoiding taking the mutex at all during
invalidate_range. This has numerous advantages all of which stem from
avoid the sleeping function from inside the unknown context. In
particular, it simplifies the invalidate_range because we no longer
have to juggle the spinlock/mutex and can just hold the spinlock
for the entire walk. To compensate, we have to make get_pages a bit more
complicated in order to serialise with a pending cancel_userptr worker.
As we hold the struct_mutex, we have no choice but to return EAGAIN and
hope that the worker is then flushed before we retry after reacquiring
the struct_mutex.
The important caveat is that the invalidate_range itself is no longer
synchronous. There exists a small but definite period in time in which
the old PTE's page remain accessible via the GPU. Note however that the
physical pages themselves are not invalidated by the mmu_notifier, just
the CPU view of the address space. The impact should be limited to a
delay in pages being flushed, rather than a possibility of writing to
the wrong pages. The only race condition that this worsens is remapping
an userptr active on the GPU where fresh work may still reference the
old pages due to struct_mutex contention. Given that userspace is racing
with the GPU, it is fair to say that the results are undefined.
v2: Only queue (and importantly only take one refcnt) the worker once.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:34:46 +0000 (12:34 +0100)]
drm/i915: Fix userptr deadlock with aliased GTT mmappings
Michał Winiarski found a really evil way to trigger a struct_mutex
deadlock with userptr. He found that if he allocated a userptr bo and
then GTT mmaped another bo, or even itself, at the same address as the
userptr using MAP_FIXED, he could then cause a deadlock any time we then
had to invalidate the GTT mmappings (so at will). Tvrtko then found by
repeatedly allocating GTT mmappings he could alias with an old userptr
mmap and also trigger the deadlock.
To counter act the deadlock, we make the observation that we only need
to take the struct_mutex if the object has any pages to revoke, and that
before userspace can alias with the userptr address space, it must have
invalidated the userptr->pages. Thus if we can check for those pages
outside of the struct_mutex, we can avoid the deadlock. To do so we
introduce a separate flag for userptr objects that we can inspect from
the mmu-notifier underneath its spinlock.
The patch makes one eye-catching change. That is the removal serial=0
after detecting a to-be-freed object inside the invalidate walker. I
felt setting serial=0 was a questionable pessimisation: it denies us the
chance to reuse the current iterator for the next loop (before it is
freed) and being explicit makes the reader question the validity of the
locking (since the object-free race could occur elsewhere). The
serialisation of the iterator is through the spinlock, if the object is
freed before the next loop then the notifier.serial will be incremented
and we start the walk from the beginning as we detect the invalid cache.
To try and tame the error paths and interactions with the userptr->active
flag, we have to do a fair amount of rearranging of get_pages_userptr().
v2: Grammar fixes
v3: Reorder set-active so that it is only set when obj->pages is set
(and so needs cancellation). Only the order of setting obj->pages and
the active-flag is crucial. Calling gup after invalidate-range begin
means the userptr sees the new set of backing storage (and so will not
need to invalidate its new pages), but we have to be careful not to set
the active-flag prior to successfully establishing obj->pages.
v4: Take the active->flag early so we know in the mmu-notifier when we
have to cancel a pending gup-worker.
v5: Rearrange the error path so that is not so convoluted
v6: Set pinned to 0 when negative before calling release_pages()
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Testcase: igt/gem_userptr_blits/map-fixed*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 1 Oct 2015 11:34:45 +0000 (12:34 +0100)]
drm/i915: Only update the current userptr worker
The userptr worker allows for a slight race condition where upon there
may two or more threads calling get_user_pages for the same object. When
we have the array of pages, then we serialise the update of the object.
However, the worker should only overwrite the obj->userptr.work pointer
if and only if it is the active one. Currently we clear it for a
secondary worker with the effect that we may rarely force a second
lookup.
v2: Rebase and rename a variable to avoid 80cols
v3: Mention v2
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Fri, 2 Oct 2015 13:16:53 +0000 (14:16 +0100)]
drm/i915: prevent out of range pt in the PDE macros (take 3)
We tried to fix this in commit
fdc454c1484a ("drm/i915: Prevent out of
range pt in gen6_for_each_pde").
But the static analyzer still complains that, just before we break due
to "iter < I915_PDES", we do "pt = (pd)->page_table[iter]" with an
iter value that is bigger than I915_PDES. Of course, this isn't really
a problem since no one uses pt outside the macro. Still, every single
new usage of the macro will create a new issue for us to mark as a
false positive.
Also, Paulo re-started the discussion a while ago [1], but didn't end up
implemented.
In order to "solve" this "problem", this patch takes the ideas from
Chris and Dave, but that check would change the desired behavior of the
code, because the object (for example pdp->page_directory[iter]) can be
null during init/alloc, and C would take this as false, breaking the for
loop immediately.
This has been already verified with "static analysis tools".
[1]http://lists.freedesktop.org/archives/intel-gfx/2015-June/068548.html
v2: Make it a single statement, while preventing the common subexpression
elimination (Chris)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tvrtko Ursulin [Mon, 5 Oct 2015 12:26:36 +0000 (13:26 +0100)]
drm/i915: Clean up associated VMAs on context destruction
Prevent leaking VMAs and PPGTT VMs when objects are imported
via flink.
Scenario is that any VMAs created by the importer will be left
dangling after the importer exits, or destroys the PPGTT context
with which they are associated.
This is caused by object destruction not running when the
importer closes the buffer object handle due the reference held
by the exporter. This also leaks the VM since the VMA has a
reference on it.
In practice these leaks can be observed by stopping and starting
the X server on a kernel with fbcon compiled in. Every time
X server exits another VMA will be leaked against the fbcon's
frame buffer object.
Also on systems where flink buffer sharing is used extensively,
like Android, this leak has even more serious consequences.
This version is takes a general approach from the earlier work
by Rafael Barbalho (drm/i915: Clean-up PPGTT on context
destruction) and tries to incorporate the subsequent discussion
between Chris Wilson and Daniel Vetter.
v2:
Removed immediate cleanup on object retire - it was causing a
recursive VMA unbind via i915_gem_object_wait_rendering. And
it is in fact not even needed since by definition context
cleanup worker runs only after the last context reference has
been dropped, hence all VMAs against the VM belonging to the
context are already on the inactive list.
v3:
Previous version could deadlock since VMA unbind waits on any
rendering on an object to complete. Objects can be busy in a
different VM which would mean that the cleanup loop would do
the wait with the struct mutex held.
This is an even simpler approach where we just unbind VMAs
without waiting since we know all VMAs belonging to this VM
are idle, and there is nothing in flight, at the point
context destructor runs.
v4:
Double underscore prefix for __915_vma_unbind_no_wait and a
commit message typo fix. (Michel Thierry)
Note that this is just a partial/interim fix since we have a bit a
fundamental issue with cleaning up, e.g.
https://bugs.freedesktop.org/show_bug.cgi?id=87729
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Testcase: igt/gem_ppgtt.c/flink-and-exit-vma-leak
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rafael Barbalho <rafael.barbalho@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
[danvet: Add a note that this isn't everything.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
kbuild test robot [Mon, 5 Oct 2015 08:21:11 +0000 (16:21 +0800)]
drm/i915/bxt: vlv_dsi_reset_clocks() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ander Conselvan de Oliveira [Mon, 5 Oct 2015 07:01:13 +0000 (10:01 +0300)]
drm/i915: Rename DP link training functions
The link training functions had confusing names. The start function
actually does the clock recovery phase of the link training, and the
complete function does the channel equalization. So call them that
instead. Also, every call to intel_dp_start_link_train() was followed
by a call to intel_dp_complete_link_train(), so add a new start
function that calls clock_recory and channel_equalization.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Mon, 5 Oct 2015 11:13:15 +0000 (16:43 +0530)]
drm/i915: Add hot_plug hook for hdmi encoder
This patch adds a separate probe function for HDMI
EDID read over DDC channel. This function has been
registered as a .hot_plug handler for HDMI encoder.
The current implementation of hdmi_detect()
function re-sets the cached HDMI edid (in connector->detect_edid) in
every detect call.This function gets called many times, sometimes
directly from userspace probes, forcing drivers to read EDID every
detect function call.This causes several problems like:
1. Race conditions in multiple hot_plug / unplug cases, between
interrupts bottom halves and userspace detections.
2. Many Un-necessary EDID reads for single hotplug/unplug
3. HDMI complaince failures which expects only one EDID read per hotplug
This function will be serving the purpose of really reading the EDID
by really probing the DDC channel, and updating the cached EDID.
The plan is to:
1. i915 IRQ handler bottom half function already calls
intel_encoder->hotplug() function. Adding This probe function which
will read the EDID only in case of a hotplug / unplug.
2. During init_connector this probe will be called to read the edid
3. Reuse the cached EDID in hdmi_detect() function.
The "< gen7" check is there because this was tested only for >=gen7
platforms. For older platforms the hotplug/reading edid path remains same.
v2: Calling set_edid instead of hdmi_probe during init.
Also, for platforms having DDI, intel_encoder for DP and HDMI is same
(taken from intel_dig_port), so for DP also, hot_plug function gets called
which is not intended here. So, check for HDMI in intel_hdmi_probe
Rely on HPD for updating edid only for platforms gen > 8 and also for VLV.
v3: Dropping the gen < 8 || !VLV check. Now all platforms should rely on
hotplug or init for updating the edid.(Daniel)
Also, calling hdmi_probe in init instead of set_edid
v4: Renaming intel_hdmi_probe to intel_hdmi_hot_plug.
Also calling this hotplug handler from intel_hpd_init to take care of init
resume scenarios.
v5: Moved the call to encoder hotplug during init to separate patch(Daniel)
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
[danvet: Mark intel_hdmi_hot_plug as static.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jordan Justen [Fri, 2 Oct 2015 06:09:58 +0000 (23:09 -0700)]
drm/i915: Add GEN7_GPGPU_DISPATCHDIMX/Y/Z to the register whitelist
This is required to support glDispatchComputeIndirect for gen7.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sagar Arun Kamble [Thu, 1 Oct 2015 14:59:27 +0000 (20:29 +0530)]
drm/i915: Update Promotion timer for RC6 TO Mode
When using RC6 timeout mode, the timeout value
should be written to GEN6_RC6_THRESHOLD.
v2: Updated commit message. (Tom)
v3: Rebase over whitespace differences. (Daniel)
Cc: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Dai [Wed, 30 Sep 2015 16:46:37 +0000 (09:46 -0700)]
drm/i915/guc: Add host2guc notification for suspend and resume
Add host2guc interface to notify GuC power state changes when
enter or resume from power saving state.
v3: Move intel_guc_suspend to i915_drm_suspend for consistency.
v2: Add GuC suspend/resume to runtime suspend/resume too
v1: Change to a more flexible way when fill host to GuC scratch
data in order to remove hard coding.
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 8 Sep 2015 15:05:45 +0000 (18:05 +0300)]
drm/i915: Skip CHV PHY asserts until PHY has been fully reset
The BIOS can leave the CHV display PHY in some odd state where
some of the LDOs/lanes won't power down fully when unused. This
will trigger a host of asserts that were added in:
30142273a3e83936fd7b45aa5339311a9295ca51 drm/i915: Add CHV PHY LDO power sanity checks
6669e39f95b5530ca8cb9137703ceb5e83e5d648 drm/i915: Add some CHV DPIO lane power state asserts
To avoid that, skip the asserts until the PHY power well has been
disabled at least once. That will fully reset the PHY, and once
brought back up, the dynamic power down features will work correctly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 8 Sep 2015 15:05:44 +0000 (18:05 +0300)]
drm/i915: Don't bypass LRC on CHV
The docs are unclear as usual, so it's not clear whether LRC should be
bypassed, performed normally or GRC code should be used as the LRC code.
Some old docs stated that LRC bypass ought to be used, more recent ones
no longer say that. Some docs indicated that we could use GRC as the LRC
code on CHV, but the BIOS doesn't do that, so let's not do it either.
Besides to enable LRC bypass properly, I believe we should set the bit
already before deasserting cmnreset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sonika Jindal [Mon, 5 Oct 2015 11:13:14 +0000 (16:43 +0530)]
drm/i915: Call encoder hotplug for init and resume cases
For all the encoders, call the hot_plug if it is registered.
This is required for connected boot and resume cases to generate
fake hpd resulting in reading of edid.
Removing the initial sdvo hot_plug call too so that it will be called
just once from this loop.
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dan Carpenter [Fri, 2 Oct 2015 15:14:22 +0000 (18:14 +0300)]
drm/i915: unlock on error in i915_ppgtt_info()
We need to call intel_runtime_pm_put() and mutex_unlock() before
returning.
Fixes:
7cb5dff8d59d ('drm/i915: fix task reference leak in i915_debugfs.c')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sunil Kamath [Wed, 30 Sep 2015 17:04:57 +0000 (22:34 +0530)]
drm/i915/bxt: Modify BXT BLC according to VBT changes
Latest VBT mentions which set of registers will be used for BLC,
as controller number field. Making use of this field in BXT
BLC implementation. Also, the registers are used in case control
pin indicates display DDI. Adding a check for this.
According to Bspec, BLC_PWM_*_2 uses the display utility pin for output.
To use backlight 2, enable the utility pin with mode = PWM
v2: Jani's review comments
addressed
- Add a prefix _ to BXT BLC registers definitions.
- Add "bxt only" comment for u8 controller
- Remove control_pin check for DDI controller
- Check for valid controller values
- Set pipe bits in UTIL_PIN_CTL
- Enable/Disable UTIL_PIN_CTL in enable/disable_backlight()
- If BLC 2 is used, read active_low_pwm from UTIL_PIN polarity
Satheesh's review comment addressed
- If UTIL PIN is already enabled, BIOS would have programmed it. No
need to disable and enable again.
v3: Jani's review comments
- add UTIL_PIN_PIPE_MASK and UTIL_PIN_MODE_MASK
- Disable UTIL_PIN if controller 1 is used
- Mask out UTIL_PIN_PIPE_MASK and UTIL_PIN_MODE_MASK before enabling
UTIL_PIN
- check valid controller value in intel_bios.c
- add backlight.util_pin_active_low
- disable util pin before enabling
v4: Change for BXT-PO branch:
Stubbed unwanted definition which was existing before
because of DC6 patch.
UTIL_PIN_MODE_PWM (0x1b << 24)
v2: Fixed Jani's review comment.
v3: Split the backight PWM frequency programming into separate patch,
in cases BIOS doesn't initializes it.
v4: Starting afresh and not modifying existing state for backlight, as
per Jani's recommendation.
v5: Fixed Jani's review comment wrt util pin enable
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Tue, 1 Sep 2015 14:11:46 +0000 (19:41 +0530)]
drm/i915/bxt: get DSI pixelclock
BXT's DSI PLL is different from that of VLV. So this patch
adds a new function to get the current DSI pixel clock based
on the PLL divider ratio and lane count.
This function is required for intel_dsi_get_config() function.
v2: Fixed Jani's review comments.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Tue, 1 Sep 2015 14:11:45 +0000 (19:41 +0530)]
drm/i915/bxt: get_hw_state for BXT
Pick appropriate port control register (BXT or VLV), based on device.
Get the current hw state wrt Mipi port.
v2: Rebased on latest drm nightly branch.
v3: Removed the GET_DSI_PORT_CTRL Macro for consistency with earlier
implementations as per Jani's suggestion.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Tue, 1 Sep 2015 14:11:44 +0000 (19:41 +0530)]
drm/i915/bxt: DSI disable and post-disable
This patch contains changes to support DSI disble sequence in BXT.
The changes are:
1. BXT specific changes in clear_device_ready function.
2. BXT specific changes in DSI disable and post-disable functions.
3. Add a new function to reset BXT Dphy clock and dividers
(bxt_dsi_reset_clocks).
4. Moved some part of the vlv clock reset code, in a new function
(vlv_dsi_reset_clocks) maintaining the exact same sequence.
5. Wrapper function to call corresponding reset clock function.
v2: Fixed Jani's review comments.
v3: Removed the GET_DSI_PORT_CTRL Macro for consistency with earlier
implementations as per Jani's suggestion.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Wed, 23 Sep 2015 17:57:17 +0000 (23:27 +0530)]
drm/i915/bxt: Program Tx Rx and Dphy clocks
BXT DSI clocks are different than previous platforms. So adding a
new function to program following clocks and dividers:
1. Program variable divider to generate input to Tx clock divider
(Output value must be < 39.5Mhz)
2. Select divide by 2 option to get < 20Mhz for Tx clock
3. Program 8by3 divider to generate Rx clock
v2: Fixed Jani's review comments. Adjusted the Macro definition as
per convention. Simplified the logic for bit definitions for
MIPI PORT A and PORT C in same registers.
v3: Refactored the macros for TX, RX Escape and DPHY clocks as per
Jani's suggestion.
v4: Addressed Jani's review comments.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Tue, 1 Sep 2015 14:11:42 +0000 (19:41 +0530)]
drm/i915/bxt: DSI enable for BXT
This patch contains following changes:
1. MIPI device ready changes to support dsi_pre_enable. Changes
are specific to BXT device ready sequence. Added check for
ULPS mode(No effects on VLV).
2. Changes in dsi_enable to pick BXT port control register.
3. Changes in dsi_pre_enable to restrict DPIO programming for VLV
v2: Fixed Jani's review comments. Removed the changes in VLV/CHV
code. Fixed the macros to get proper port offsets.
v3: Rebased on latest drm-nightly branch. Fixed Jani's review comments.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shashank Sharma [Thu, 1 Oct 2015 16:53:49 +0000 (22:23 +0530)]
drm/i915/bxt: DSI encoder support in CRTC modeset
SKL and BXT qualifies the HAS_DDI() check, and hence haswell
modeset functions are re-used for modeset sequence. But DDI
interface doesn't include support for DSI.
This patch adds:
1. cases for DSI encoder, in those modeset functions and allows
a CRTC modeset
2. Adds call to pre_pll enabled from CRTC modeset function. Nothing
needs to be done as such in CRTC for DSI encoder, as PLL, clock
and and transcoder programming will be taken care in encoder's
pre_enable and pre_pll_enable function.
v2: Fixed Jani's review comments. Added INVALID_PORT for non DDI
encoder like DSI for platforms having HAS_DDI as true.
v3: Rebased on latest drm-nightly branch. Added a WARN_ON for invalid
encoder.
v4: WARN_ON for invalid encoder is refactored as per Jani's suggestion.
Fixed the sequence for pre_pll_enable.
v5: Protected DDI code paths in case of DSI encoder calls.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Wed, 30 Sep 2015 20:00:44 +0000 (23:00 +0300)]
drm/i915: rename INSTDONE1 to GEN4_INSTDONE1
This register was added on GEN4, by the name INSTDONE_1 whereas the GEN6
specification calls it INSTDONE_2. Keep the original name with a
platform prefix to make it clearer which INSTDONE register instance this
is. Also add a comment about the SNB alternative name.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Wed, 30 Sep 2015 20:00:43 +0000 (23:00 +0300)]
drm/i915: rename INSTDONE to GEN2_INSTDONE
We have a bunch of INSTDONE registers for different platforms and
purposes and it's not immediately clear which instance they are just by
looking at the register name. This one was added on GEN2, where it was
the only INSTDONE register, so mark it as such.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Wed, 30 Sep 2015 20:00:42 +0000 (23:00 +0300)]
drm/i915: remove duplicate names for the render ring INSTDONE register
We use 3 different names to refer to the same render ring INSTDONE
register. This can be confusing when comparing two parts of the code
accessing the register via different names. Although the GEN4 version's
layout is different, we treat it the same way as the GEN7+ version, in
that we simply read it out during error capture. So remove the
duplicates and leave a comment about the GEN4 difference.
Note that there is also a GEN2 version of this register, but that's on a
different address so not handled in this patch.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Thu, 1 Oct 2015 12:33:57 +0000 (13:33 +0100)]
drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset
There are some allocations that must be only referenced by 32-bit
offsets. To limit the chances of having the first 4GB already full,
objects not requiring this workaround use DRM_MM_SEARCH_BELOW/
DRM_MM_CREATE_TOP flags
In specific, any resource used with flat/heapless (0x00000000-0xfffff000)
General State Heap (GSH) or Instruction State Heap (ISH) must be in a
32-bit range, because the General State Offset and Instruction State
Offset are limited to 32-bits.
Objects must have EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag to indicate if
they can be allocated above the 32-bit address range. To limit the
chances of having the first 4GB already full, objects will use
DRM_MM_SEARCH_BELOW + DRM_MM_CREATE_TOP flags when possible.
The libdrm user of the EXEC_OBJECT_SUPPORTS_48B_ADDRESS flag is here:
http://lists.freedesktop.org/archives/intel-gfx/2015-September/075836.html
v2: Changed flag logic from neeeds_32b, to supports_48b.
v3: Moved 48-bit support flag back to exec_object. (Chris, Daniel)
v4: Split pin flags into PIN_ZONE_4G and PIN_HIGH; update PIN_OFFSET_MASK
to use last PIN_ defined instead of hard-coded value; use correct limit
check in eb_vma_misplaced. (Chris)
v5: Don't touch PIN_OFFSET_MASK and update workaround comment (Chris)
v6: Apply pin-high for ggtt too (Chris)
v7: Handle simultaneous pin-high and pin-mappable end correctly (Akash)
Fix check for entries currently using +4GB addresses, use min_t and
other polish in object_bind_to_vm (Chris)
v8: Commit message updated to point to libdrm patch.
v9: vmas are allocated in the correct ozone, so only check flag when the
vma has not been allocated. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v4)
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sagar Arun Kamble [Wed, 30 Sep 2015 16:57:37 +0000 (09:57 -0700)]
drm/i915/guc: Don't forward flip interrupts to GuC
Due to flip interrupts GuC stays awake always and GT does not enter
RC6. Do not route those interrupts to GuC for now. Driver won't touch
DE_GUCRMR register and leave it as what default value.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 30 Sep 2015 14:06:43 +0000 (17:06 +0300)]
drm/i915: s/GET_CFG_CR1_REG/DPLL_CFGCR1/ etc.
v2: Use SKL_DPLLx symbolic names instead of raw numbers
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:18 +0000 (15:53 -0700)]
drm/i915: Calculate watermark configuration during atomic check (v2)
v2: Don't forget to actually check the cstate->active value when
tallying up the number of active CRTC's. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:17 +0000 (15:53 -0700)]
drm/i915: Don't set plane visible during HW readout if CRTC is off
We already ensure that pstate->visible = false when crtc->active = false
during runtime programming; make sure we follow the same logic when
reading out initial hardware state.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:16 +0000 (15:53 -0700)]
drm/i915: Calculate ILK-style watermarks during atomic check (v3)
Calculate pipe watermarks during atomic calculation phase, based on the
contents of the atomic transaction's state structure. We still program
the watermarks at the same time we did before, but the computation now
happens much earlier.
While this patch isn't too exciting by itself, it paves the way for
future patches. The eventual goal (which will be realized in future
patches in this series) is to calculate multiple sets up watermark
values up front, and then program them at different times (pre- vs
post-vblank) on the platforms that need a two-step watermark update.
While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since
this function only applies to ILK-style watermarks and we have a
completely different function for SKL-style watermarks.
Note that the original code had a memcmp() in ilk_update_wm() to avoid
calling ilk_program_watermarks() if the watermarks hadn't changed. This
memcmp vanishes here, which means we may do some unnecessary result
generation and merging in cases where watermarks didn't change, but the
lower-level function ilk_write_wm_values already makes sure that we
don't actually try to program the watermark registers again.
v2: Squash a few commits from the original series together; no longer
leave pre-calculated wm's in a separate temporary structure since
it's easier to follow the logic if we just cut over to using the
pre-calculated values directly.
v3:
- Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint
and use intel_atomic_get_crtc_state() to avoid need for extra
casting. (Ander)
- Drop unused intel_check_crtc() function prototype. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:15 +0000 (15:53 -0700)]
drm/i915: Calculate pipe watermarks into CRTC state (v3)
A future patch will calculate these during the atomic 'check' phase
rather than at WM programming time, so let's store the watermark
values we're planning to use in the CRTC state; the values actually
active on the hardware remains in intel_crtc.
While we're at it, do some minor restructuring to keep ILK and SKL
values in a union.
v2: Don't move cxsr_allowed to state (Maarten)
v3: Only calculate watermarks in state. Still keep active watermarks in
intel_crtc itself. (Ville)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Sep 2015 22:53:14 +0000 (15:53 -0700)]
drm/i915: Refactor ilk_update_wm (v3)
Split ilk_update_wm() into two parts; one doing the programming
and the other the calculations.
v2: Fix typo in commit message
v3 (by Matt): Heavily rebased for current codebase.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:13 +0000 (15:53 -0700)]
drm/i915: Drop intel_update_sprite_watermarks
The only platform that still has an update_sprite_wm entrypoint is SKL;
on SKL, intel_update_sprite_watermarks just updates intel_plane->wm and
then performs a regular watermark update. However intel_plane->wm is
only used to update a couple fields in intel_wm_config, and those fields
are never used by the SKL code, so on SKL an update_sprite_wm is
effectively identical to an update_wm call. Since we're already
ensuring that the regular intel_update_wm is called any time we'd try to
call intel_update_sprite_watermarks, the whole call is redundant and can
be dropped.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:12 +0000 (15:53 -0700)]
drm/i915/ivb: Move WaCxSRDisabledForSpriteScaling w/a to atomic check
Determine whether we need to apply this workaround at atomic check time
and just set a flag that will be used by the main watermark update
routine.
Moving this workaround into the atomic framework reduces
ilk_update_sprite_wm() to just a standard watermark update, so drop it
completely and just ensure that ilk_update_wm() is called whenever a
sprite plane is updated in a way that would affect watermarks.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:11 +0000 (15:53 -0700)]
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v3)
Just pull the info out of the state structures rather than staging
it in an additional set of structures. To make this more
straightforward, we change the signature of several internal WM
functions to take the crtc state as a parameter.
v2:
- Don't forget to skip cursor planes on a loop in the DDB allocation
function to match original behavior. (Ander)
- Change a use of intel_crtc->active to cstate->active. They should
be identical, but it's better to be consistent. (Ander)
- Rework more function signatures to pass states rather than crtc for
consistency. (Ander)
v3:
- Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten)
- Packed formats should pass '0' to drm_format_plane_cpp(), not 1.
(Maarten)
- Drop unwanted WARN_ON() for disabled planes when calculating data
rate for SKL. (Maarten)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:10 +0000 (15:53 -0700)]
drm/i915/skl: Simplify wm structures slightly (v2)
A bunch of SKL watermark-related structures have the cursor plane as a
separate entry from the rest of the planes. Since a previous patch
updated I915_MAX_PLANES such that those plane arrays now have a slot for
the cursor, update the code to use the new slot in the existing plane
arrays and kill off the cursor-specific structures.
There shouldn't be any functional change here; this is just shuffling
around how the data is stored in some of the data structures. The whole
patch is generated with Coccinelle via the following semantic patch:
@@ struct skl_pipe_wm_parameters WMP; @@
- WMP.cursor
+ WMP.plane[PLANE_CURSOR]
@@ struct skl_pipe_wm_parameters *WMP; @@
- WMP->cursor
+ WMP->plane[PLANE_CURSOR]
@@ @@
struct skl_pipe_wm_parameters {
...
- struct intel_plane_wm_parameters cursor;
...
};
@@
struct skl_ddb_allocation DDB;
expression E;
@@
- DDB.cursor[E]
+ DDB.plane[E][PLANE_CURSOR]
@@
struct skl_ddb_allocation *DDB;
expression E;
@@
- DDB->cursor[E]
+ DDB->plane[E][PLANE_CURSOR]
@@ @@
struct skl_ddb_allocation {
...
- struct skl_ddb_entry cursor[I915_MAX_PIPES];
...
};
@@
struct skl_wm_values WMV;
expression E1, E2;
@@
(
- WMV.cursor[E1][E2]
+ WMV.plane[E1][PLANE_CURSOR][E2]
|
- WMV.cursor_trans[E1]
+ WMV.plane_trans[E1][PLANE_CURSOR]
)
@@
struct skl_wm_values *WMV;
expression E1, E2;
@@
(
- WMV->cursor[E1][E2]
+ WMV->plane[E1][PLANE_CURSOR][E2]
|
- WMV->cursor_trans[E1]
+ WMV->plane_trans[E1][PLANE_CURSOR]
)
@@ @@
struct skl_wm_values {
...
- uint32_t cursor[I915_MAX_PIPES][8];
...
- uint32_t cursor_trans[I915_MAX_PIPES];
...
};
@@ struct skl_wm_level WML; @@
(
- WML.cursor_en
+ WML.plane_en[PLANE_CURSOR]
|
- WML.cursor_res_b
+ WML.plane_res_b[PLANE_CURSOR]
|
- WML.cursor_res_l
+ WML.plane_res_l[PLANE_CURSOR]
)
@@ struct skl_wm_level *WML; @@
(
- WML->cursor_en
+ WML->plane_en[PLANE_CURSOR]
|
- WML->cursor_res_b
+ WML->plane_res_b[PLANE_CURSOR]
|
- WML->cursor_res_l
+ WML->plane_res_l[PLANE_CURSOR]
)
@@ @@
struct skl_wm_level {
...
- bool cursor_en;
...
- uint16_t cursor_res_b;
- uint8_t cursor_res_l;
...
};
v2: Use a PLANE_CURSOR enum entry rather than making the code reference
I915_MAX_PLANES or I915_MAX_PLANES+1, which was confusing. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:09 +0000 (15:53 -0700)]
drm/i915: Determine I915_MAX_PLANES from plane enum
Let the compiler figure out what I915_MAX_PLANES is from 'enum plane' so
that we don't need a separate #define.
While we're at it, add the cursor plane to the enum. This will cause
I915_MAX_PLANES to now include the cursor plane in its count (it didn't
previously). This change is safe since we currently only use this
value in array declarations (never in the actual code logic); we just
wind up allocating slightly more memory than we need to. A followup
patch will cause various parts of the code to start using the extra
array element where appropriate.
(This patch probably should have been squashed with the followup patch,
but I couldn't figure out how to get Coccinelle to modify enum
declarations...)
Suggested-by: Ander Conselvan De Oliveira <conselvan2@gmail.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:08 +0000 (15:53 -0700)]
drm/i915: Eliminate usage of pipe_wm_parameters from ILK-style WM (v2)
Just pull the info out of the CRTC state structure rather than staging
it in an additional structure.
Note that we use cstate->active rather than intel_crtc->active which may
appear to be a change in behavior. However since we're no longer trying
to recalculate watermarks during the "pipe off" stage of a modeset,
intel_crtc->active and cstate->active should always be identical when
watermarks are calculated (at least for ILK-style platforms).
v2: Clarify reasoning for cstate->active and add a WARN_ON to the code
to assert that it really is always identical to intel_crtc->active
as expected.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:07 +0000 (15:53 -0700)]
drm/i915: Eliminate usage of plane_wm_parameters from ILK-style WM code (v2)
Just pull the info out of the plane state structure rather than staging
it in an additional structure.
v2: Add 'visible' condition to sprites_scaled so that we don't limit the
WM level when the sprite isn't enabled. (Ville)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by(v1): Ander Conselvan de Oliveira <conselvan2@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 24 Sep 2015 22:53:06 +0000 (15:53 -0700)]
drm/i915: Drop redundant watermark programming
In commit
commit
e4ca061275ec6a48b66c6edebe08644e666994c0
Author: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Date: Wed Jul 8 15:31:52 2015 +0200
drm/i915: Don't forget to mark crtc as inactive after disable
we added extra watermark updates to all of the .crtc_disable()
entrypoints to avoid problems problems with system resume on SKL. Those
disable entrypoints are currently called in just two places in the
driver: intel_atomic_commit (i.e., during a modeset) and
intel_crtc_disable_noatomic (which is called during hardware readout).
It seems that this extra watermark recalculation should only be
important in the latter case (which happens during a resume operation);
the former case should always have appropriate watermark programming
happening at other points in the modeset sequence.
Let's move the watermark update out of the .crtc_disable() entrypoints
and place it directly in intel_crtc_disable_noatomic() so that it only
happens on S3 resume and not during a regular modeset (since the
existing watermark handling should properly update watermarks during
normal atomic commits).
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Tue, 29 Sep 2015 13:28:46 +0000 (16:28 +0300)]
drm/i915/bxt: fix RC6 residency time calculation
The RC6 residency time unit is 833.33ns on BXT according to the
specification, so update the calculation accordingly. Use the same way
as CHV/VLV to divide by the corresponding frequency, as I think this is
the more natural unit for what the HW does internally.
v2:
- add missing IS_BROXTON check (Ville)
Testcase: igt/pm_rc6_residency
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex Dai [Fri, 25 Sep 2015 18:46:56 +0000 (11:46 -0700)]
drm/i915/guc: Media domain bit needed when notify GuC rc6 state
GuC expects two bits for Render and Media domain separately when
driver sends data via host2guc SAMPLE_FORCEWAKE. Bit 0 is for
Render and bit 1 is for Media domain.
v2: Keep sync with code for WaRsDoubleRc6WrlWithCoarsePowerGating
v1: Add parameters definition to avoid magic value
Signed-off-by: Alex Dai <yu.dai@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:31 +0000 (20:03 +0300)]
drm/i915: s/_TRANSA_CHICKEN/TRANS_CHICKEN(PIPE_A)/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:30 +0000 (20:03 +0300)]
drm/i915: s/_FDI_RXA_.../FDI_RX_...(PIPE_A)/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Takashi Iwai [Wed, 30 Sep 2015 07:39:01 +0000 (09:39 +0200)]
drm/i915: Add missing const to audio_rate_need_prog()
The lack of const leads to a compile warning after merging i915
upstream tree:
drivers/gpu/drm/i915/intel_audio.c:147:13: note: expected 'struct drm_display_mode *' but argument is of type 'const struct drm_display_mode *'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Łukasz Daniluk [Fri, 25 Sep 2015 09:54:58 +0000 (11:54 +0200)]
drm/i915/bdw: Check for slice, subslice and EU count for BDW
Added checks for available slices, subslices and EUs for Broadwell. This
information is filled in intel_device_info and is available to user with
GET_PARAM.
Added checks for enabled slices, subslices and EU for Broadwell. This
information is based on available counts but takes power gated slices
into account. It can be read in debugfs.
Introduce new register defines that contain information on slices on
Broadwell.
v2:
- Introduce GT_SLICE_INFO register
- Change Broadwell sseu_device_status function to use GT_SLICE_INFO
register instead of RPCS register
- Undo removal of dev_priv variables in Cherryview and Gen9
sseu_device_satus functions
v3:
- Fix style issues
v4:
- Corrected comment
- Reverted reordering of defines
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Łukasz Daniluk <lukasz.daniluk@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Julia Lawall [Sun, 13 Sep 2015 12:15:25 +0000 (14:15 +0200)]
drm: i915: drop null test before destroy functions
Remove unneeded NULL test.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@ expression x; @@
-if (x != NULL)
\(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Mon, 14 Sep 2015 11:03:48 +0000 (14:03 +0300)]
drm/i915: make backlight hooks connector specific
Previously we've relied on having basically one backlight and one
backlight type per platform. This is already a bit quirky with PMIC PWM
support on VLV/CHV platforms with MIPI DSI. In the foreseeable future
we'll have at least DPCD based backlight control on eDP and DCS command
based backlight control on MIPI DSI. Backlight is becoming more and more
connector specific, so reflect this fact by making the backlight control
hooks connector specific.
This enables further work to reuse generic backlight code in
intel_panel.c while adding more specific backlight code accessed via the
hooks.
Cc: Deepak M <m.deepak@intel.com>
Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Deepak M <m.deepak@intel.com>
Reviewed-by: Yetunde Adebisi <yetundex.adebisi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 29 Sep 2015 07:24:26 +0000 (10:24 +0300)]
drm/i915/ddi: use switch case instead of if ladder for ddi_get_encoder_port
Make the alternatives stand out better.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 29 Sep 2015 07:24:25 +0000 (10:24 +0300)]
drm/i915/ddi: warn instead of oops on invalid ddi encoder type
It's more useful to limp on than bring the kernel down. Hitting this is
a more likely event with BXT DSI, although care should be taken not to
call the function for DSI.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Sep 2015 20:29:20 +0000 (23:29 +0300)]
drm/i915: Use czclk_freq in vlv c0 residency calculations
Replace the use of mem_freq/4 with czclk_freq in the vlv c0 residency
calculations.
Also deal with VLV_COUNT_RANGE_HIGH which affects all RCx residency
counters. We have just enough bits to do this without intermediate
divisions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 28 Sep 2015 20:43:43 +0000 (23:43 +0300)]
drm/i915: Simplify vlv/chv rc6 residency calculation
We have the czclk frequency in dev_priv now, so let's just use it
when converting the rc6 counters to milliseconds. This eliminates
a bunch of hairy code that essentially tries to extract the czclk
frequency using yet another method.
v2: Fix typos in commit message (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Sep 2015 20:29:18 +0000 (23:29 +0300)]
drm/i915: Read czclk from CCK on vlv/chv
As with the cdclk, read out czclk from CCK as well. This gives us the
real current value and avoids having to decode fuses and whatnot.
Also store it in kHz under dev_priv like we do for cdlck since it's not
just an rps related clock, and having it in kHz is more
standard/convenient for some things.
Imre also pointed out that we currently fail to read czclk on VLV, which
means the PFI credit programming isn't working as expected.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Vandana Kannan [Thu, 24 Sep 2015 20:29:17 +0000 (23:29 +0300)]
drm/i915: Renaming CCK related reg definitions
Rename the DISPLAY_TRUNK_* and DISPLAY_FREQUENCY_* bits to CCK_... instead
of DISPLAY_... to make it clear they apply to all CCK clock control registers.
Suggested by Ville.
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rasmus Villemoes [Mon, 28 Sep 2015 21:08:50 +0000 (23:08 +0200)]
drm/i915: Fix comparison bug
->stolen->start has type u64 aka unsigned long long; relying on the
difference (effectively cast to int) for sorting is wrong.
It wouldn't be a problem in practice if the values compared are always
within INT_MAX of each other (so that the difference is actually
representable in an int), but
440fd5283a87 ("drm/mm: Support 4 GiB and
larger ranges") strongly suggests that's not the case.
Note: atm we don't support more than about 1G of stolen, so this is
impossible currenlty.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[danvet: Add note that this is impossible currently.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:46 +0000 (17:40 +0100)]
drm/i915/gen8: Move WaHdcDisableFetchWhenMasked to common init fn
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:45 +0000 (17:40 +0100)]
drm/i915/gen8: Move WaForceEnableNonCoherent to common init fn
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:44 +0000 (17:40 +0100)]
drm/i915/gen8: Move GEN7_GT_MODE WA to common init fn
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:43 +0000 (17:40 +0100)]
drm/i915/gen8: Move Wa4x4STCOptimizationDisable to common init fn
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:42 +0000 (17:40 +0100)]
drm/i915/gen8: Move HiZ RAW stall optimization disable WA to common init fn
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:40 +0000 (17:40 +0100)]
drm/i915/gen8: Move WaDisablePartialInstShootdown to common init fn
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:39 +0000 (17:40 +0100)]
drm/i915/gen8: Move WaDisableAsyncFlipPerfMode to common init fn
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:38 +0000 (17:40 +0100)]
drm/i915/gen8: Move INSTPM WA to common function
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 16:40:37 +0000 (17:40 +0100)]
drm/i915/gen8: Add gen8_init_workarounds for common WA
WA in this function should be ordered based on register address.
The following order is suggested (Ville),
instpm
mi_mode
row chicken
half slice chicken
common slice chicken
hdc chicken
cache_mode_0
cache_mode_1
gt_mode
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 13:33:44 +0000 (14:33 +0100)]
drm/i915/skl: Remove WaDisableVFUnitClockGating
Dropping it because it is for pre-production stepping, also removed
bit definition in i915_reg.h as it is not used anywhere else.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Keep #define as Ville suggested.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 13:33:43 +0000 (14:33 +0100)]
drm/i915/skl: Remove WaSetGAPSunitClckGateDisable
Dropping it because it is for pre-production stepping, also removed
bit definition in i915_reg as it is not used anywhere else.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Keep define as Ville suggested.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 13:33:42 +0000 (14:33 +0100)]
drm/i915/skl: Remove WaDisableSDEUnitClockGating
Dropping it because it is for pre-production stepping.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 13:33:40 +0000 (14:33 +0100)]
drm/i915/bxt: Add WaStoreMultiplePTEenable name
Updated WA with the name.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 13:33:37 +0000 (14:33 +0100)]
drm/i915/gen9: Merge two WA as they part of same register
Merge Wa4x4STCOptimizationDisable and WaDisablePartialResolveInVc to save
an entry in WA array.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arun Siluvery [Fri, 25 Sep 2015 13:33:35 +0000 (14:33 +0100)]
drm/i915/gen9: Handle error returned by gen9_init_workarounds
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kahola [Fri, 25 Sep 2015 11:00:32 +0000 (14:00 +0300)]
drm/i915: Add CD and pixel clock information
This patch adds information of current and maximum CD clock
frequency and pixel clock frequency information on 'i915_debugfs.c'.
v2:
- combined seperate patches for current CD clock, maximum CD clock
and maximum pixel clock
- space added between the frequency value and the unit
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:35 +0000 (20:03 +0300)]
drm/i915: s/DDI_BUF_CTL_A/DDI_BUF_CTL(PORT_A)/
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:34 +0000 (20:03 +0300)]
drm/i915: Add VLV_HDMIB etc. which already include VLV_DISPLAY_BASE
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 22 Sep 2015 16:47:51 +0000 (19:47 +0300)]
drm/i915: s/_CURACNTR/CURCNTR(PIPE_A)/
v2: Deal with _CURABASE too
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:28 +0000 (20:03 +0300)]
drm/i915: Parametrize PALETTE and LGC_PALETTE
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:27 +0000 (20:03 +0300)]
drm/i915: Include MCHBAR_MIRROR_BASE in ILK_GDSR
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:26 +0000 (20:03 +0300)]
drm/i915: Always use GEN8_RING_PDP_{LDW, UDW} instead of hand rolling the register offsets
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:25 +0000 (20:03 +0300)]
drm/i915: Add LO/HI PRIVATE_PAT registers
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 18 Sep 2015 17:03:24 +0000 (20:03 +0300)]
drm/i915: Parametrize UOS_RSA_SCRATCH
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 25 Sep 2015 13:39:30 +0000 (16:39 +0300)]
drm/i915: Add HDMI aspect ratio property for SDVO
Handle the HDMI aspect ratio property the same way in the SDVO code
as we handle it in the HDMI code.
v2: Remove stray whitespace change
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 8 Sep 2015 10:40:49 +0000 (13:40 +0300)]
drm/i915: Constify adjusted_mode
Make adjusted_mode const whereever we don't have to modify it. This only
covers cases when we have a local adjusted_mode variable, and doesn't
make any difference for cases where we just dereference
pipe_config->adjusted_mode.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 8 Sep 2015 10:40:48 +0000 (13:40 +0300)]
drm/i915: Move HDMI aspect ratio setup to .compute_config()
We shouldn't frob adjusted_mode after .compute_config(), so move the
infoframe aspect ratio setup to .compute_config() from
intel_hdmi_set_avi_infoframe().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 25 Sep 2015 13:38:56 +0000 (16:38 +0300)]
drm/i915: Always use crtc_ timings when dealing with adjustead_mode
The adjustead_mode crtc_ timings are what we will program into the hardware,
so it's those timings we should be looking practically everywhere.
The normal and crtc_ timings should differ only when stere doubling is
used. In that case the normal timings are the orignal non-doubled
timigns, and crtc_ timings are the doubled timings used by the hardware.
The only case where we continue to look at the normal timings is when we
pass the adjusted_mode to drm_match_{cea,hdmi}_mode() to find the VIC.
drm_edid keeps the modes aronund in the non-double form only, so it
needs the non-double timings to match against.
Done with sed
's/adjusted_mode->\([vhVH]\)/adjusted_mode->crtc_\1/g'
's/adjusted_mode->clock/adjusted_mode->crtc_clock/g'
with a manual s/VDisplay/vdisplay/ within the comment in intel_dvo.c
v2: Update due to intel_dsi.c changes
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>