OSDN Git Service
Ben Cheng [Wed, 5 Jan 2011 20:39:42 +0000 (12:39 -0800)]
More Jit-to-Interp entry point cleanup.
Only register entry points dispatched through [r6+#offset] in
JitToInterpEntries.
For ARM targets check the size of JitToInterpEntries explicitly to
make sure that its last entry is within 128 byte from InterpState
due to the Thumb codegen constraint.
Change-Id: I74184115cb3a3c89afc3a5fe53685671d9cb1027
Ben Cheng [Tue, 4 Jan 2011 23:37:04 +0000 (15:37 -0800)]
Don't treat dvmJitToPatchPredictedChain as a Jit-to-Interp entry point.
It is just a native callout helper function.
Change-Id: I6398b6876f5ba579b76e732107157a4c99337796
Bill Buzbee [Mon, 27 Dec 2010 17:31:21 +0000 (09:31 -0800)]
[Jit] Fix for
3311468 Maps crashed at handleFmt...
Change https://android-git.corp.google.com/g/#change,86452 eliminated unused
chaining cells for direct JNI calls. However, a code path in CodegenDriver.c
assumed all similar invokes would have such cells. Slightly re-arranged the
to avoid relying on the existance of the cell in cases in which it isn't
needed.
Change-Id: Ifc28acf559455a292b4b915ef1302085557e1d81
Carl Shapiro [Thu, 23 Dec 2010 00:22:11 +0000 (16:22 -0800)]
Merge "Restore a few external allocation constants for compatibility."
Ben Cheng [Wed, 22 Dec 2010 20:27:41 +0000 (12:27 -0800)]
Eliminate the chaining cells for direct JNI calls.
The JNI code is dispatched through TEMPLATE_INVOKE_METHOD_NATIVE, so
having a chaining cell for a non-virtual native call simply wastes
space.
Change-Id: Iaf944f745a0723a7772ea168fb35f79e79b21fae
Carl Shapiro [Wed, 22 Dec 2010 20:21:01 +0000 (12:21 -0800)]
Restore a few external allocation constants for compatibility.
Aspects of the external allocation facility were exposed through the
VMDebug getAllocCount method. In a previous change I removed all of
the references to external allocation from getAllocCount. This had
the unfortunate side effect of breaking some CTS tests and causing the
VM to abort if the old constants were provided to getAllocCount on an
asserts enabled dalvik build.
The straight forward workaround seems to be to restore the special
treatment of these values in getAllocCount for as long as we support
the public interfaces of the external allocation facility. An easier
way out may have been to make the failure case of getAllocCount return
0 instead of -1 and aborting on an asserts build. Without some
analysis of API usage in market I would prefer to not change the -1
return value to 0 as it seems the thread counts currently return -1.
This change also eliminates the conditional export of the enum values
related to external allocation. Those values are published API so it
makes no sense to maintain a way to guard their inclusion.
Change-Id: I49c173e0ec305536760c7aec15eebdc29213fc56
Jesse Wilson [Wed, 22 Dec 2010 20:01:23 +0000 (12:01 -0800)]
Revert "Remove inline natives for an unused performance test."
This reverts commit
7ecd89dc02ce00c425788bd4989bdb6cde9a618a.
Change-Id: I427635b7e3f7be45cfde78b8046dab3b23b64562
Jesse Wilson [Wed, 22 Dec 2010 18:06:58 +0000 (10:06 -0800)]
Update DalvikVersion due to removed NativeTestTarget
Change-Id: I891b63a676b6c3f12fdbc5858ef12f235bc1b9c1
Jesse Wilson [Wed, 22 Dec 2010 13:20:31 +0000 (05:20 -0800)]
Remove inline natives for an unused performance test.
Change-Id: I80cfb918bdf174aeb6de83909c840563f6b945dd
Carl Shapiro [Tue, 21 Dec 2010 02:33:24 +0000 (18:33 -0800)]
Simplify the interface for waiting for a concurrent GC to complete.
Previously, there was no guarantee that a GC would have completed when
the waiting routine returned. This was an oversight, and the workaround
became to wait in a loop that tested the condition that the GC running
flag was not set. The right fix was always to push the loop into the
waiting routine itself to keep the interface simple. This change backs
out the hack, moving the waiting loop to where it belongs.
Change-Id: Idc6ab6e5d4379a5da27e9e115d23d4123c7cacc4
Carl Shapiro [Fri, 17 Dec 2010 23:34:52 +0000 (15:34 -0800)]
Remove the external allocation facility.
Change-Id: Iff508a9173382f29c67ca9e6eb6f65855dce0be4
Dan Bornstein [Thu, 16 Dec 2010 21:17:30 +0000 (13:17 -0800)]
Expose sysCopyFileToFile() and use it.
Moved from ZipArchive.c, with tweaks to for argument order and name. Also
tweaked a related function in ZipArchive to match.
Change-Id: I4d2e3c8b44386d87c5aa1c4565f72da87357fce8
Dan Bornstein [Thu, 16 Dec 2010 00:58:48 +0000 (16:58 -0800)]
Hook up the preexisting RawDexFile opener.
This one is similar in functionality to what's in JarFile.
I also made a couple minor (whitespace/comment/logging) changes to
JarFile where I spotted the opportunities.
This change makes it so that, if you happen to put a plain dex file on
your classpath (e.g., "dalvikvm -classpath /data/local/blort.dex
Blort"), it will actually be able to be used. This was documented as
working, but it was a lie...until now.
Change-Id: I2c93a8fdb40afa2d920904ab1235b7909e5837f8
Dan Bornstein [Thu, 16 Dec 2010 00:06:33 +0000 (16:06 -0800)]
Merge "Initialize my field."
Dan Bornstein [Wed, 15 Dec 2010 23:59:19 +0000 (15:59 -0800)]
Initialize my field.
<self-flagellation/>We can't count on malloc() to hand us zeroed
memory. I should know better by now.</self-flagellation>
Change-Id: If63c9d213982236e6e0362d03a4dd772b15bc73c
Carl Shapiro [Wed, 15 Dec 2010 23:58:13 +0000 (15:58 -0800)]
Merge "Never write an hprof record for a null root."
Carl Shapiro [Wed, 15 Dec 2010 21:36:59 +0000 (13:36 -0800)]
Never write an hprof record for a null root.
The old hprof implementation was never presented with null references
but with the new visitor based implementation null references are a
possibility. With this change, the root visitor short circuits after
encountering a null reference and does write to the hprof file.
Change-Id: I38e8808a6ea43cb4361582ada4714f20ace7bea6
Dan Bornstein [Wed, 15 Dec 2010 00:57:00 +0000 (16:57 -0800)]
Plumbing for loading byte[]-based dex files.
This is obviously incomplete, but it's at least similarly incomplete
to the related code path it's right next to.
Change-Id: I06af6df3a4c2d648bf5b61b30a1ed5bbab4d170e
Brad Fitzpatrick [Tue, 14 Dec 2010 00:53:28 +0000 (16:53 -0800)]
Add a new, optional "is sensitive thread?" hook.
The Android framework implements this hook in Ie6f58d130a29.
Bug:
3226270
Change-Id: I7342248e5699a22b71647e7cfeec52ec871cefaf
Carl Shapiro [Mon, 13 Dec 2010 20:13:47 +0000 (12:13 -0800)]
Fix a bug in hprof that corrupted the root set output.
The root visitor takes an Object ** but the hprof output assumed an
Object *. As such, bad root set object ids were written to the hprof
dump and, by extension, objects reachable only from the roots either
looked like floating garbage or were wholly omitted from the output.
Change-Id: I58b31b6ad145fa9843ecbda630ed8b6ab951d931
Dan Bornstein [Wed, 8 Dec 2010 22:47:11 +0000 (14:47 -0800)]
Various improvements to dexdeps.
This includes:
* Adding an option to only produce lists of dependent classes (and not
also fields and methods).
* Adding the ability to process multiple files on a single invocation.
* Adding a label at the head of the section for each file.
* Neatening up Output a bit by factoring "System.out" into a static field.
Change-Id: Id9a691d23afd18f82ab3790cb760cfd12e14bc86
Elliott Hughes [Sat, 4 Dec 2010 01:59:32 +0000 (17:59 -0800)]
Throw useful detail messages when Method.invoke fails.
Part of my general push for better exceptions.
(Cherry-pick from dalvik-dev of https://android-git.corp.google.com/g/83287.)
Change-Id: I0cd47b492fbdc52db2eef8e2a02f31bda2a086eb
Brian Carlstrom [Mon, 6 Dec 2010 22:23:09 +0000 (14:23 -0800)]
Merge remote branch 'goog/dalvik-dev' into dalvik-dev-to-master
Andy McFadden [Sun, 5 Dec 2010 07:42:21 +0000 (23:42 -0800)]
am
91b93ea4: Fix monitor verification.
* commit '
91b93ea496e8c86f410f302a94c2adf0fc9d8189':
Fix monitor verification.
Dan Bornstein [Sat, 4 Dec 2010 01:58:01 +0000 (17:58 -0800)]
Minor simplification.
Change-Id: Ie17ba83ead45028a8b7b32c1cc5763f9dd6d684c
Dan Bornstein [Sat, 4 Dec 2010 01:49:46 +0000 (17:49 -0800)]
Merge "Fix stupid copy-paste error." into dalvik-dev
Dan Bornstein [Sat, 4 Dec 2010 01:48:27 +0000 (17:48 -0800)]
Fix stupid copy-paste error.
Change-Id: I1ad1e8c26ec47b9b148fc6a4292afa2ee25e58e2
Dan Bornstein [Sat, 4 Dec 2010 01:32:04 +0000 (17:32 -0800)]
Merge "These asserts are no longer pointless." into dalvik-dev
Dan Bornstein [Sat, 4 Dec 2010 01:24:34 +0000 (17:24 -0800)]
These asserts are no longer pointless.
Change-Id: I32cfd2334de344156a41d1c2d7c10a8d96e970c4
Elliott Hughes [Sat, 4 Dec 2010 00:37:54 +0000 (16:37 -0800)]
Make the inlined String.charAt throw detailed exceptions.
Part of my general push for better exceptions. I'll add a unit test to libcore,
but until we lose the dexopt brain damage, we won't be able to see it (dexopt
can't optimize JUnit tests, so we get no coverage of inline natives on our
continuous builds; http://b/
3003994).
Change-Id: I3af757751534747fa4b3cc725b0914a8f7b3d45d
Dan Bornstein [Sat, 4 Dec 2010 00:07:33 +0000 (16:07 -0800)]
Merge "Another clarifying rename and a bit more automation." into dalvik-dev
Dan Bornstein [Fri, 3 Dec 2010 23:32:40 +0000 (15:32 -0800)]
Another clarifying rename and a bit more automation.
kNumDalvikInstructions is now kNumPackedOpcodes, there is a new
kMaxOpcodeValue, and both are generated by opcode-gen.
Change-Id: Ic46f1f52d2d21382452c8e777024f4a985ad31d3
Bonus: Reworded the switch and array data comment for clarity.
Elliott Hughes [Fri, 3 Dec 2010 23:40:14 +0000 (15:40 -0800)]
Merge "Use dvmHumanReadableDescriptor in -Xjnitrace." into dalvik-dev
Dan Bornstein [Fri, 3 Dec 2010 23:11:55 +0000 (15:11 -0800)]
Regular-expression compatibility.
The most compatible way of indicating that a dash is part of a
character range is to put a single dash at the end of the range
expression.
Change-Id: I1e118038dfacffbc004c97be0ae1c3dfe97e861d
Dan Bornstein [Fri, 3 Dec 2010 21:16:08 +0000 (13:16 -0800)]
Small fixes.
I had unpackOpcode() slightly wrong, and I made the libcore opcode
numbers always be four hex digits.
Change-Id: I4f988b8794b4b6c48ef91698a8e567fa46b96dac
Dan Bornstein [Fri, 3 Dec 2010 21:01:06 +0000 (13:01 -0800)]
Clean up the opcode-gen script.
There was way too much string duplication, and it needed at least
a bit more commenting.
Change-Id: Id31ee1fd260db6f4afe301764c60de7c63b3f729
Elliott Hughes [Fri, 3 Dec 2010 18:57:15 +0000 (10:57 -0800)]
Use dvmHumanReadableDescriptor in -Xjnitrace.
This made the output more readable while debugging a zlib issue.
Bug:
3220923
Change-Id: Ie360516a8a7a92b5b75fe70feb5c9722289bed78
Carl Shapiro [Fri, 3 Dec 2010 01:37:48 +0000 (17:37 -0800)]
Merge "Eliminate the GC.h header file." into dalvik-dev
Carl Shapiro [Fri, 3 Dec 2010 01:27:01 +0000 (17:27 -0800)]
Eliminate the GC.h header file.
Change-Id: Ieda8b819032fc6aac80b390960d9c6f4864795ab
Dan Bornstein [Fri, 3 Dec 2010 01:09:33 +0000 (17:09 -0800)]
Merge "Add a note." into dalvik-dev
Dan Bornstein [Fri, 3 Dec 2010 01:08:56 +0000 (17:08 -0800)]
Add a note.
Change-Id: I55362cbc8bfbb22ebcd493db7cdeb34fc3394e3a
Carl Shapiro [Fri, 3 Dec 2010 01:07:52 +0000 (17:07 -0800)]
Merge "Get rid of the ugly macros inside the bitmap sweep routine." into dalvik-dev
Dan Bornstein [Fri, 3 Dec 2010 01:07:38 +0000 (17:07 -0800)]
Merge "Make opcode 00ff be called "dispatch-ff"." into dalvik-dev
Dan Bornstein [Fri, 3 Dec 2010 01:07:04 +0000 (17:07 -0800)]
Merge "Inching closer to having extended opcodes in the vm." into dalvik-dev
Carl Shapiro [Fri, 3 Dec 2010 00:41:28 +0000 (16:41 -0800)]
Get rid of the ugly macros inside the bitmap sweep routine.
Thanks to recent simplifications the implementation macrology can be
expanded out. While we are here, fix the comments about the treatment
of max. This edit should have happened in the previous change to the
sweeper.
Change-Id: Ia18ee580f5955dca8c27b96f7badbfb067a0a1cb
Carl Shapiro [Fri, 3 Dec 2010 00:59:54 +0000 (16:59 -0800)]
Merge "Drive all root scanning by the root visitor." into dalvik-dev
Dan Bornstein [Fri, 3 Dec 2010 00:46:25 +0000 (16:46 -0800)]
Make opcode 00ff be called "dispatch-ff".
With this change, it's still implemented as an unused opcode, but
it's now ready for its new life!
Change-Id: Ic70d311704925067e47d87b657d133a792144e65
Andy McFadden [Thu, 2 Dec 2010 21:13:22 +0000 (13:13 -0800)]
Fix monitor verification.
An earlier change inadvertently disabled the basic register type check
when the fancier checks were disabled. This restores the type check,
and replaces a "TODO: add an assert" with an actual assert.
Bug
3246598.
(cherry-pick from dalvik-dev)
Change-Id: Iddfb33d2a3f0c03f5a06c3f6e4a47644ca640736
buzbee [Fri, 3 Dec 2010 00:24:14 +0000 (16:24 -0800)]
Merge "Replace dalvik test local mode with new host mode" into dalvik-dev
Dan Bornstein [Fri, 3 Dec 2010 00:05:51 +0000 (16:05 -0800)]
Inching closer to having extended opcodes in the vm.
Change-Id: If6578a0686ac8fe5e6d1a26509d8a5c748bed179
Carl Shapiro [Fri, 3 Dec 2010 00:16:01 +0000 (16:16 -0800)]
Drive all root scanning by the root visitor.
The root visitor has been used by the concurrent collector during the
re-mark phase. This change makes both the initial mark use the same
visitor routine and obsoletes all of the one-off markers scattered
throughout the runtime sources.
Change-Id: I08ea86d875f235cc628754240ad30ea5dfe2ce70
buzbee [Thu, 2 Dec 2010 23:37:06 +0000 (15:37 -0800)]
Replace dalvik test local mode with new host mode
To run the dalvik tests with host mode:
1. build with WITH_HOST_DALVIK=true
2. run-all-tests --host, or run-test <num> --host
Change-Id: Ic20df0b0720571b5a4ae11b5a1f6ce760d921d4b
Dan Bornstein [Thu, 2 Dec 2010 23:21:59 +0000 (15:21 -0800)]
Give the awk script its own file.
The embedded awk script totally dwarfed the shell script driver. It
was getting pretty ridiculous. (Ok ok, maybe the fact that this uses
awk in the first place is itself ridiculous.)
Change-Id: Ia53dbbff636eab7aeb44ff24013c62494ef86da0
Dan Bornstein [Thu, 2 Dec 2010 23:15:54 +0000 (15:15 -0800)]
Merge "Extremely minor cleanup." into dalvik-dev
Dan Bornstein [Thu, 2 Dec 2010 23:15:21 +0000 (15:15 -0800)]
Extremely minor cleanup.
Change-Id: Ia302597d27773aa72f675509e9b4f844db65cc85
buzbee [Thu, 2 Dec 2010 23:14:51 +0000 (15:14 -0800)]
Merge "x86-mterp bug fix; support host mode in tests" into dalvik-dev
Dan Bornstein [Thu, 2 Dec 2010 20:45:00 +0000 (12:45 -0800)]
Rename some instruction/opcode types and utilities.
A lot of this is more about properties of opcodes as opposed to
inspecting instructions per se, and the new naming attempts to
make it clear what is being queried and what sort of data is being
returned.
Change-Id: Ice6f9f2ebf4f1cfa8c99597419aa13d1134a33b2
Andy McFadden [Thu, 2 Dec 2010 22:49:30 +0000 (14:49 -0800)]
Merge "Fix monitor verification." into dalvik-dev
buzbee [Thu, 2 Dec 2010 22:29:16 +0000 (14:29 -0800)]
x86-mterp bug fix; support host mode in tests
A recent x86 housecleaning change introduced a bug in OP_FILLED_ARRAY.
Fixed that, plus hacked up dalvik test scripts to support host
mode operation (with --host)
Change-Id: Iaf8b1ab753f93fa344e64f984a3c4696433ec9aa
Carl Shapiro [Thu, 2 Dec 2010 22:04:22 +0000 (14:04 -0800)]
Get rid of QUIET_ZYGOTE_GC and make it the default.
Change-Id: Ib9af028cfa46ca6041d716085ed3a78ef591bbc8
Carl Shapiro [Thu, 2 Dec 2010 21:36:58 +0000 (13:36 -0800)]
Move a stray forward declaration of HeapSource to where it's needed.
Change-Id: I10dcc065c90ce40685b20a362470a32e213bf28f
Andy McFadden [Thu, 2 Dec 2010 21:13:22 +0000 (13:13 -0800)]
Fix monitor verification.
An earlier change inadvertently disabled the basic register type check
when the fancier checks were disabled. This restores the type check,
and replaces a "TODO: add an assert" with an actual assert.
Bug
3246598.
Change-Id: I842c392e1e3aa8525235d873726c840f39703ff3
Dan Bornstein [Thu, 2 Dec 2010 20:31:20 +0000 (12:31 -0800)]
Merge "Make the enums typedeffed as such." into dalvik-dev
Dan Bornstein [Thu, 2 Dec 2010 18:35:48 +0000 (10:35 -0800)]
Make the enums typedeffed as such.
This makes these definitions C++-friendly. I also tried to clean up
and generally improve the documentation in this area. (Maybe you can
guess what's coming next.)
Change-Id: I76ab3087dcde5cc255288a993ec7b2963f2b733b
Elliott Hughes [Thu, 2 Dec 2010 18:32:19 +0000 (10:32 -0800)]
am
f0badd23: Merge "Fix dvmHumanReadableDescriptor("B")."
* commit '
f0badd239ba1d4a65adebcf2df100ec7e1e54786':
Fix dvmHumanReadableDescriptor("B").
Elliott Hughes [Thu, 2 Dec 2010 18:26:57 +0000 (10:26 -0800)]
Merge "Fix dvmHumanReadableDescriptor("B")."
Elliott Hughes [Thu, 2 Dec 2010 00:59:21 +0000 (16:59 -0800)]
Fix dvmHumanReadableDescriptor("B").
dvmHumanReadableDescriptor was failing for primitive scalars in
libdvm_assert.so --- there was an assertion that wasn't true,
because we wouldn't have copied the ';' into the result (in the
other cases, we'd copy the ';' and then overwrite it).
This patch rewrites dvmHumanReadableDescriptor to be a little
less tasteless, removes the asserts, behave better when out of
memory, and to include unit tests (currently only runnable on
the device).
Bug:
3245572
Change-Id: I57b06c774a5bc61c2d374cce6285553c3c5f388b
Carl Shapiro [Thu, 2 Dec 2010 03:51:36 +0000 (19:51 -0800)]
Fix the typing of the assert macro as required by C++.
Change-Id: Iff70db8bf4f1ae8d1c4abbe565fa7993b0fe0df9
Carl Shapiro [Thu, 2 Dec 2010 03:32:05 +0000 (19:32 -0800)]
Move reference processing next to its implementation.
With this change, all of the reference processing now happens in the
same module. As such, we can make all of the implementation routines
static.
Change-Id: If3f1ff2e48f49b57b75cfc9d0af61ad892435c47
Carl Shapiro [Thu, 2 Dec 2010 03:33:11 +0000 (19:33 -0800)]
Merge "Return the value at the top of the mark stack straight away." into dalvik-dev
Carl Shapiro [Thu, 2 Dec 2010 02:54:19 +0000 (18:54 -0800)]
Return the value at the top of the mark stack straight away.
Change-Id: I9ce87b1e72bb3e8a0b876ab9ba05569260cd93e8
Dan Bornstein [Thu, 2 Dec 2010 01:02:26 +0000 (17:02 -0800)]
It's "opcode" not "opCode".
Similarly "Opcode" not "OpCode".
This appears to be the general worldwide consensus on the matter. Other
residents of my office didn't seem to mind one way or the other how it's
spelled in our code, but for whatever reason, it really bugged me.
Change-Id: Ia0b73d19c54aefc0f543a9c9451dda22ee876a59
Dan Bornstein [Thu, 2 Dec 2010 00:34:22 +0000 (16:34 -0800)]
Rename OpCodeNames.c -> DexOpcodes.c.
Change-Id: I9e22543740129f4a8fd50ff246a165d6358ed9b5
Dan Bornstein [Thu, 2 Dec 2010 00:28:49 +0000 (16:28 -0800)]
Clarify the spec slightly.
And, importantly, fix a lingering naming issue.
Change-Id: I2b0d2008aae32679430910dfe5fa58a86f0a59df
Andy McFadden [Thu, 2 Dec 2010 00:17:24 +0000 (16:17 -0800)]
Merge "Minor tweaks." into dalvik-dev
Dan Bornstein [Thu, 2 Dec 2010 00:17:12 +0000 (16:17 -0800)]
Merge "Rename OpCode.h -> DexOpcodes.h." into dalvik-dev
Dan Bornstein [Wed, 1 Dec 2010 22:23:44 +0000 (14:23 -0800)]
Rename OpCode.h -> DexOpcodes.h.
Also incorporate the former contents of OpCodeNames.h. This is a small
attempt to increase naming consistency in libdex. There will be a bit
more to come, in a follow-up.
Change-Id: Ia7ab06042dde2e19eda02ef1fee72fb4260e899d
Andy McFadden [Mon, 29 Nov 2010 15:38:01 +0000 (07:38 -0800)]
Minor tweaks.
Use dexOpCodeFromCodeUnit instead of (*insns & 0xff). (Not strictly
necessary in its current incarnation, but the code will soon be checking
opcode flags.)
Mark some local functions "static".
Make instruction widths >= 65536 a warning rather than an error. I
don't think you can get there with converted Java bytecode because of
the method size limit, but it's possible in directly-generated DEX.
Change-Id: Ic9714b855c606f8b5c618793b271436e1c2cdc44
Brian Carlstrom [Wed, 1 Dec 2010 22:04:47 +0000 (14:04 -0800)]
am
33dab964: Improve "No new threads in -Xzygote mode" message to include thread name.
* commit '
33dab964ac38c05472b734a2d36f6a2aacf9b731':
Improve "No new threads in -Xzygote mode" message to include thread name.
Brian Carlstrom [Wed, 1 Dec 2010 21:46:50 +0000 (13:46 -0800)]
Improve "No new threads in -Xzygote mode" message to include thread name.
Change-Id: I5335d86dc1e4cd3f7fd4270ff1f10cdc70f87e92
Dan Bornstein [Wed, 1 Dec 2010 20:30:21 +0000 (12:30 -0800)]
Add more "extended opcode" structure to libdex.
Although we don't yet generate any of the extended opcodes, this
change makes it a bit easier to add them.
In particular, we now differentiate between the raw opcode in a code
unit and an associated "packed opcode number." The packed opcode space
is densely populated in the range 0x000-0x1ff (though there will still
be a few unused slots), whereas the raw opcode values are sparse
throughout the range 0x0000-0xffff.
The OpCode enum is redefined/clarified to have packed, not sparse,
opcode values.
Change-Id: Ie3208a258648fbf044d344646f66c49ad24c31b2
buzbee [Wed, 1 Dec 2010 11:43:41 +0000 (03:43 -0800)]
am
94a6213f: am
b83b4c88: am
ebcd8646: Fix for Issue
3161543 - Remove stray line of code in JIT
* commit '
94a6213f5693c3cd994f9734c6a085003692a5ba':
Fix for Issue
3161543 - Remove stray line of code in JIT
buzbee [Wed, 1 Dec 2010 11:36:44 +0000 (03:36 -0800)]
am
b83b4c88: am
ebcd8646: Fix for Issue
3161543 - Remove stray line of code in JIT
* commit '
b83b4c8876262cac96cf65c4cc27f83174b5bd00':
Fix for Issue
3161543 - Remove stray line of code in JIT
Brian Carlstrom [Wed, 1 Dec 2010 06:29:11 +0000 (22:29 -0800)]
am
a1d0e5ed: Merge remote branch \'goog/dalvik-dev\' into dalvik-dev-to-master
* commit '
a1d0e5ed9c6879d29382d0bdb287c9a9a2234127':
Dan Bornstein [Wed, 1 Dec 2010 06:14:50 +0000 (22:14 -0800)]
Add a link to the dex-format doc.
For ease of clicking around when browsing and easier discoverability
in general.
Change-Id: Ia50507df454dd65526e99ef14194c310bb11edb1
Carl Shapiro [Wed, 1 Dec 2010 05:19:01 +0000 (21:19 -0800)]
Merge "Remove excess generality from the bitmap sweep walking routine." into dalvik-dev
Carl Shapiro [Wed, 1 Dec 2010 04:55:32 +0000 (20:55 -0800)]
Remove excess generality from the bitmap sweep walking routine.
The bitmaps that are passed to the sweep walking routine always have
the same base, bitsLen, and max values. As such, there is no need to
account for situations where these values may be different. This is
guarnateed because bitmaps being swept are actually private copies of
the global bitmaps which are initialized with common parameters.
Furthermore, the sweep callback does not change the max values, so we
do not need a clean-up loop to accomodate changes to max. The sweep
routine operates on garbage objects and therefore has no need to set
bits in a bitmap and, by extension, update the max value.
Also eliminated was an obsolete TODO regarding the unrolling of a
loop. We will leave that class of optimization to the compiler.
Change-Id: Iff6ede3d0ac68f88d381a06911fb6bd9cada926d
Brian Carlstrom [Wed, 1 Dec 2010 01:25:51 +0000 (17:25 -0800)]
Merge remote branch 'goog/dalvik-dev' into dalvik-dev-to-master
Dan Bornstein [Wed, 1 Dec 2010 00:46:20 +0000 (16:46 -0800)]
Bring 00x and 20bc into the fold.
Change-Id: I12fde7eb665c9f3b75684018457f9464b0990156
Dan Bornstein [Wed, 1 Dec 2010 00:29:42 +0000 (16:29 -0800)]
Explain a bit.
Change-Id: I845f34924249b6c5f34ad9ef7b9ebd3bc44f1aac
Dan Bornstein [Tue, 30 Nov 2010 22:58:53 +0000 (14:58 -0800)]
invoke-direct-empty doesn't actually invoke anything.
Update bytecode.txt as well as a couple bits in the JIT in recognition
of this fact.
Change-Id: I989556d39b40a879021eaf841404e015076073be
Dan Bornstein [Tue, 30 Nov 2010 22:31:07 +0000 (14:31 -0800)]
Merge "Punch opcode info access from libcore to the vm." into dalvik-dev
Andy McFadden [Tue, 30 Nov 2010 21:55:44 +0000 (13:55 -0800)]
Merge "Fix DexFile cookie check." into dalvik-dev
Dan Bornstein [Tue, 30 Nov 2010 20:21:28 +0000 (12:21 -0800)]
Punch opcode info access from libcore to the vm.
I looked at doing this as a native file in libcore, but that seemed to
pull in too many dependencies.
Change-Id: I1753b9b78bc593b9467a877a5fea0ba5d5161cfe
Andy McFadden [Tue, 30 Nov 2010 19:29:51 +0000 (11:29 -0800)]
Fix DexFile cookie check.
We use a "cookie" rather than just accepting a raw pointer so that the
VM doesn't crash if something weird gets passed in. Unfortunately the
cookie verify function was dereferencing the cookie to compute a value
for the hash table lookup, defeating the purpose. Since we don't deal
with opening the same DEX file in a constructive way, we can just take
the low part of the pointer itself and use that as the hash. (Hashing
isn't really necessary given the number of DEX files we expect to have
open; mostly it's just a convenient synchronized data structure.)
Bug
3238298
Change-Id: I1a545d4154b58159acdc21809b55b098c1419644
buzbee [Tue, 30 Nov 2010 19:48:56 +0000 (11:48 -0800)]
am
ebcd8646: Fix for Issue
3161543 - Remove stray line of code in JIT
* commit '
ebcd86461f9d61a1a5f25a8f6dde5a9ded5ba275':
Fix for Issue
3161543 - Remove stray line of code in JIT
buzbee [Wed, 3 Nov 2010 17:44:15 +0000 (10:44 -0700)]
Fix for Issue
3161543 - Remove stray line of code in JIT
During Change 22370 "Thumb/Thumb2 instruction selection rework"
line 1689 of Codegen.c was inadvertently duplicated and deposited
in the unrelated function genPuntToInterp() at line 1732.
genPuntToInterp() is rarely used and half of the time (if the
roll-back Dalvik PC was word-aligned) the error would have been
benign. However, if the Dalvik PC is not word-aligned, the result
would be a seg fault.
The fix is to remove the line of code.
Change-Id: Ib2ffb80059a639923c342a36797eb6c4995c5218
Dan Bornstein [Tue, 30 Nov 2010 18:45:02 +0000 (10:45 -0800)]
Clean up the opcode maintenance instructions.
Change-Id: Ic9d7fcfd234116099ef510e4339a9af0bc3fcb1d
Carl Shapiro [Tue, 30 Nov 2010 04:05:40 +0000 (20:05 -0800)]
Merge "Make the scan and the visit routines look more alike." into dalvik-dev
Carl Shapiro [Tue, 30 Nov 2010 01:24:50 +0000 (17:24 -0800)]
Make the scan and the visit routines look more alike.
This code shares a common origin but the implementations eventually
diverged. Alas, a forthcoming change may cause the scan routines to
permanently diverge from the visitor. Until that happens, we should
try to keep these routines as similar as possible.
Change-Id: Icf95b3bb4db704c8c7b4ab5aab84d9e091675bab