OSDN Git Service
Linus Torvalds [Sat, 9 Feb 2019 21:43:12 +0000 (13:43 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"One PM related driver bugfix and a MAINTAINERS update"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
i2c: omap: Use noirq system sleep pm ops to idle device for suspend
Linus Torvalds [Sat, 9 Feb 2019 20:41:14 +0000 (12:41 -0800)]
Merge tag 'mips_fixes_5.0_3' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A batch of MIPS fixes for 5.0, nothing too scary.
- A workaround for a Loongson 3 CPU bug is the biggest change, but
still fairly straightforward. It adds extra memory barriers (sync
instructions) around atomics to avoid a CPU bug that can break
atomicity.
- Loongson64 also sees a fix for powering off some systems which
would incorrectly reboot rather than waiting for the power down
sequence to complete.
- We have DT fixes for the Ingenic JZ4740 SoC & the JZ4780-based Ci20
board, and a DT warning fix for the Nexsys4/MIPSfpga board.
- The Cavium Octeon platform sees a further fix to the behaviour of
the pcie_disable command line argument that was introduced in v3.3.
- The VDSO, introduced in v4.4, sees build fixes for configurations
of GCC that were built using the --with-fp-32= flag to specify a
default 32-bit floating point ABI.
- get_frame_info() sees a fix for configurations with
CONFIG_KALLSYMS=n, for which it previously always returned an
error.
- If the MIPS Coherence Manager (CM) reports an error then we'll now
clear that error correctly so that the GCR_ERROR_CAUSE register
will be updated with information about any future errors"
* tag 'mips_fixes_5.0_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: cm: reprime error cause
mips: loongson64: remove unreachable(), fix loongson_poweroff().
MIPS: Remove function size check in get_frame_info()
MIPS: Use lower case for addresses in nexys4ddr.dts
MIPS: Loongson: Introduce and use loongson_llsc_mb()
MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds
MIPS: VDSO: Use same -m%-float cflag as the kernel proper
MIPS: OCTEON: don't set octeon_dma_bar_type if PCI is disabled
DTS: CI20: Fix bugs in ci20's device tree.
MIPS: DTS: jz4740: Correct interrupt number of DMA core
Linus Torvalds [Sat, 9 Feb 2019 18:26:09 +0000 (10:26 -0800)]
Merge tag 'for-linus-
20190209' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph, fixing namespace locking when
dealing with the effects log, and a rapid add/remove issue (Keith)
- blktrace tweak, ensuring requests with -1 sectors are shown (Jan)
- link power management quirk for a Smasung SSD (Hans)
- m68k nfblock dynamic major number fix (Chengguang)
- series fixing blk-iolatency inflight counter issue (Liu)
- ensure that we clear ->private when setting up the aio kiocb (Mike)
- __find_get_block_slow() rate limit print (Tetsuo)
* tag 'for-linus-
20190209' of git://git.kernel.dk/linux-block:
blk-mq: remove duplicated definition of blk_mq_freeze_queue
Blk-iolatency: warn on negative inflight IO counter
blk-iolatency: fix IO hang due to negative inflight counter
blktrace: Show requests without sector
fs: ratelimit __find_get_block_slow() failure message.
m68k: set proper major_num when specifying module param major_num
libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD
nvme-pci: fix rapid add remove sequence
nvme: lock NS list changes while handling command effects
aio: initialize kiocb private in case any filesystems expect it.
Linus Torvalds [Sat, 9 Feb 2019 18:17:01 +0000 (10:17 -0800)]
Merge tag 'mtd/fixes-for-5.0-rc6' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
- Fix a problem with the imx28 ECC engine
- Remove a debug trace introduced in
2b6f0090a333 ("mtd: Check
add_mtd_device() ret code")
- Make sure partitions of size 0 can be registered
- Fix kernel-doc warning in the rawnand core
- Fix the error path of spinand_init() (missing manufacturer cleanup in
a few places)
- Address a problem with the SPI NAND PROGRAM LOAD operation which does
not work as expected on some parts.
* tag 'mtd/fixes-for-5.0-rc6' of git://git.infradead.org/linux-mtd:
mtd: rawnand: gpmi: fix MX28 bus master lockup problem
mtd: Make sure mtd->erasesize is valid even if the partition is of size 0
mtd: Remove a debug trace in mtdpart.c
mtd: rawnand: fix kernel-doc warnings
mtd: spinand: Fix the error/cleanup path in spinand_init()
mtd: spinand: Handle the case where PROGRAM LOAD does not reset the cache
Linus Torvalds [Sat, 9 Feb 2019 17:44:08 +0000 (09:44 -0800)]
Merge tag 'for-linus-5.0-rc6-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two very minor fixes: one remove of a #include for an unused header
and a fix of the xen ML address in MAINTAINERS"
* tag 'for-linus-5.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: unify reference to xen-devel list
arch/arm/xen: Remove duplicate header
Linus Torvalds [Sat, 9 Feb 2019 00:23:41 +0000 (16:23 -0800)]
Merge tag 'armsoc-fixes-5.0' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a bit larger than normal, as we had not managed to send out a
pull request before traveling for a week without my signing key.
There are multiple code fixes for older bugs, all of which should get
backported into stable kernels:
- tango: one fix for multiplatform configurations broken on other
platforms when tango is enabled
- arm_scmi: device unregistration fix
- iop32x: fix kernel oops from extraneous __init annotation
- pxa: remove a double kfree
- fsl qbman: close an interrupt clearing race
The rest is the usual collection of smaller fixes for device tree
files, on the renesas, allwinner, meson, omap, davinci, qualcomm and
imx platforms.
Some of these are for compile-time warnings, most are for board
specific functionality that fails to work because of incorrect
settings"
* tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: tango: Improve ARCH_MULTIPLATFORM compatibility
firmware: arm_scmi: provide the mandatory device release callback
ARM: iop32x/n2100: fix PCI IRQ mapping
arm64: dts: add msm8996 compatible to gicv3
ARM: dts: am335x-shc.dts: fix wrong cd pin level
ARM: dts: n900: fix mmc1 card detect gpio polarity
ARM: dts: omap3-gta04: Fix graph_port warning
ARM: pxa: ssp: unneeded to free devm_ allocated data
ARM: dts: r8a7743: Convert to new LVDS DT bindings
soc: fsl: qbman: avoid race in clearing QMan interrupt
arm64: dts: renesas: r8a77965: Enable DMA for SCIF2
arm64: dts: renesas: r8a7796: Enable DMA for SCIF2
arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2
ARM: dts: da850: fix interrupt numbers for clocksource
dt-bindings: imx8mq: Number clocks consecutively
arm64: dts: meson: Fix mmc cd-gpios polarity
ARM: dts: imx6sx: correct backward compatible of gpt
ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property
ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3
ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
...
Linus Torvalds [Sat, 9 Feb 2019 00:21:33 +0000 (16:21 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two arm64 fixes for -rc6. They resolve a kernel NULL dereference in
kexec and bogus kernel page table dumping when userspace is configured
for 52-bit virtual addressing.
Summary:
- Fix kernel oops when attemping kexec_file() with a NULL cmdline
- Fix page table output in debugfs when ARM64_USER_VA_BITS_52=y"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kexec_file: handle empty command-line
arm64: ptdump: Don't iterate kernel page tables using PTRS_PER_PXX
Linus Torvalds [Sat, 9 Feb 2019 00:04:12 +0000 (16:04 -0800)]
Merge tag 'powerpc-5.0-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Just two fixes, both going to stable.
- Our support for split pmd page table lock had a bug which could
lead to a crash on mremap() when using the Radix MMU (Power9 only).
- A fix for the PAPR SCM driver (nvdimm) we added last release, which
had a bug where we might mis-handle a hypervisor response leading
to us failing to attach the memory region.
Thanks to: Aneesh Kumar K.V, Oliver O'Halloran"
* tag 'powerpc-5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Use the correct bind address
powerpc/radix: Fix kernel crash with mremap()
Linus Torvalds [Fri, 8 Feb 2019 23:39:28 +0000 (15:39 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull signal fixes from Eric Biederman:
"This contains four small fixes for signal handling. A missing range
check, a regression fix, prioritizing signals we have already started
a signal group exit for, and better detection of synchronous signals.
The confused decision of which signals to handle failed spectacularly
when a timer was pointed at SIGBUS and the stack overflowed. Resulting
in an unkillable process in an infinite loop instead of a SIGSEGV and
core dump"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Better detection of synchronous signals
signal: Always notice exiting tasks
signal: Always attempt to allocate siginfo for SIGSTOP
signal: Make siginmask safe when passed a signal of 0
Linus Torvalds [Fri, 8 Feb 2019 23:37:17 +0000 (15:37 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of five minor fixes (although, tecnhincally, the aicxxx
fix is for a major problem in that the driver won't load without it,
but I think the fact it's taken us since 4.10 to discover this
indicates that the user base for these things has declined)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: cxlflash: Prevent deadlock when adapter probe fails
Revert "scsi: libfc: Add WARN_ON() when deleting rports"
scsi: sd_zbc: Fix zone information messages
scsi: target: make the pi_prot_format ConfigFS path readable
scsi: aic94xx: fix module loading
Linus Torvalds [Fri, 8 Feb 2019 23:34:10 +0000 (15:34 -0800)]
Merge tag 'iommu-fixes-v5.0-rc5' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Intel decided to leave the newly added Scalable Mode Feature
default-disabled for now. The patch here accomplishes that"
* tag 'iommu-fixes-v5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Leave scalable mode default off
Linus Torvalds [Fri, 8 Feb 2019 23:32:10 +0000 (15:32 -0800)]
Merge tag 'pci-v5.0-fixes-4' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX) that
breaks PCIe on I.MX SoCs (Thinh Nguyen)"
* tag 'pci-v5.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX)
Linus Torvalds [Fri, 8 Feb 2019 23:30:02 +0000 (15:30 -0800)]
Merge tag 'acpi-5.0-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This prevents excessive ACPI debug messages from being printed to the
kernel log, which has started to happen after one of the recent ACPICA
commits (Erik Schmauss)"
* tag 'acpi-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Set debug output flags independent of ACPICA
Andrew Lunn [Fri, 8 Feb 2019 16:56:31 +0000 (17:56 +0100)]
MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
The listed maintainer has not been responding to emails for a while.
Add myself as a second maintainer.
Add the platform data include file, which was not listed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Liu Bo [Fri, 25 Jan 2019 00:12:49 +0000 (08:12 +0800)]
blk-mq: remove duplicated definition of blk_mq_freeze_queue
As the prototype has been defined in "include/linux/blk-mq.h", the one
in "block/blk-mq.h" can be removed then.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Liu Bo [Fri, 25 Jan 2019 00:12:48 +0000 (08:12 +0800)]
Blk-iolatency: warn on negative inflight IO counter
This is to catch any unexpected negative value of inflight IO counter.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Liu Bo [Fri, 25 Jan 2019 00:12:47 +0000 (08:12 +0800)]
blk-iolatency: fix IO hang due to negative inflight counter
Our test reported the following stack, and vmcore showed that
->inflight counter is -1.
[
ffffc9003fcc38d0] __schedule at
ffffffff8173d95d
[
ffffc9003fcc3958] schedule at
ffffffff8173de26
[
ffffc9003fcc3970] io_schedule at
ffffffff810bb6b6
[
ffffc9003fcc3988] blkcg_iolatency_throttle at
ffffffff813911cb
[
ffffc9003fcc3a20] rq_qos_throttle at
ffffffff813847f3
[
ffffc9003fcc3a48] blk_mq_make_request at
ffffffff8137468a
[
ffffc9003fcc3b08] generic_make_request at
ffffffff81368b49
[
ffffc9003fcc3b68] submit_bio at
ffffffff81368d7d
[
ffffc9003fcc3bb8] ext4_io_submit at
ffffffffa031be00 [ext4]
[
ffffc9003fcc3c00] ext4_writepages at
ffffffffa03163de [ext4]
[
ffffc9003fcc3d68] do_writepages at
ffffffff811c49ae
[
ffffc9003fcc3d78] __filemap_fdatawrite_range at
ffffffff811b6188
[
ffffc9003fcc3e30] filemap_write_and_wait_range at
ffffffff811b6301
[
ffffc9003fcc3e60] ext4_sync_file at
ffffffffa030cee8 [ext4]
[
ffffc9003fcc3ea8] vfs_fsync_range at
ffffffff8128594b
[
ffffc9003fcc3ee8] do_fsync at
ffffffff81285abd
[
ffffc9003fcc3f18] sys_fsync at
ffffffff81285d50
[
ffffc9003fcc3f28] do_syscall_64 at
ffffffff81003c04
[
ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at
ffffffff81742b8e
The ->inflight counter may be negative (-1) if
1) blk-iolatency was disabled when the IO was issued,
2) blk-iolatency was enabled before this IO reached its endio,
3) the ->inflight counter is decreased from 0 to -1 in endio()
In fact the hang can be easily reproduced by the below script,
H=/sys/fs/cgroup/unified/
P=/sys/fs/cgroup/unified/test
echo "+io" > $H/cgroup.subtree_control
mkdir -p $P
echo $$ > $P/cgroup.procs
xfs_io -f -d -c "pwrite 0 4k" /dev/sdg
echo "`cat /sys/block/sdg/dev` target=
1000000" > $P/io.latency
xfs_io -f -d -c "pwrite 0 4k" /dev/sdg
This fixes the problem by freezing the queue so that while
enabling/disabling iolatency, there is no inflight rq running.
Note that quiesce_queue is not needed as this only updating iolatency
configuration about which dispatching request_queue doesn't care.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 8 Feb 2019 19:21:54 +0000 (11:21 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"This pull request is dedicated to the upcoming snowpocalypse parts 2
and 3 in the Pacific Northwest:
1) Drop profiles are broken because some drivers use dev_kfree_skb*
instead of dev_consume_skb*, from Yang Wei.
2) Fix IWLWIFI kconfig deps, from Luca Coelho.
3) Fix percpu maps updating in bpftool, from Paolo Abeni.
4) Missing station release in batman-adv, from Felix Fietkau.
5) Fix some networking compat ioctl bugs, from Johannes Berg.
6) ucc_geth must reset the BQL queue state when stopping the device,
from Mathias Thore.
7) Several XDP bug fixes in virtio_net from Toshiaki Makita.
8) TSO packets must be sent always on queue 0 in stmmac, from Jose
Abreu.
9) Fix socket refcounting bug in RDS, from Eric Dumazet.
10) Handle sparse cpu allocations in bpf selftests, from Martynas
Pumputis.
11) Make sure mgmt frames have enough tailroom in mac80211, from Felix
Feitkau.
12) Use safe list walking in sctp_sendmsg() asoc list traversal, from
Greg Kroah-Hartman.
13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL
ccid, from Eric Dumazet.
14) Need to reload WoL password into bcmsysport device after deep
sleeps, from Florian Fainelli.
15) Remove filter from mask before freeing in cls_flower, from Petr
Machata.
16) Missing release and use after free in error paths of s390 qeth
code, from Julian Wiedmann.
17) Fix lockdep false positive in dsa code, from Marc Zyngier.
18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn.
19) Fix EQ firmware assert in qed driver, from Manish Chopra.
20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net: dsa: b53: Fix for failure when irq is not defined in dt
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
net: Don't default Cavium PTP driver to 'y'
net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net/mlx5e: Don't overwrite pedit action when multiple pedit used
net/mlx5e: Update hw flows when encap source mac changed
qed*: Advance drivers version to 8.37.0.20
qed: Change verbosity for coalescing message.
qede: Fix system crash on configuring channels.
qed: Consider TX tcs while deriving the max num_queues for PF.
...
Linus Torvalds [Fri, 8 Feb 2019 18:56:31 +0000 (10:56 -0800)]
Merge tag 'char-misc-5.0-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.0-rc6.
Nothing huge here, some more binderfs fixups found as people use it,
and there is a "large" selftest added to validate the binderfs code,
which makes up the majority of this pull request.
There's also some small mei and mic fixes to resolve some reported
issues.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mic: vop: Fix crash on remove
mic: vop: Fix use-after-free on remove
binderfs: remove separate device_initcall()
fpga: stratix10-soc: fix wrong of_node_put() in init function
mic: vop: Fix broken virtqueues
mei: free read cb on ctrl_wr list flush
samples: mei: use /dev/mei0 instead of /dev/mei
mei: me: add ice lake point device id.
binderfs: respect limit on binder control creation
binder: fix CONFIG_ANDROID_BINDER_DEVICES
selftests: add binderfs selftests
Linus Torvalds [Fri, 8 Feb 2019 18:53:44 +0000 (10:53 -0800)]
Merge tag 'driver-core-5.0-rc6' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core fixes for 5.0-rc6.
Well, not so much "driver core" as "debugfs". There's a lot of
outstanding debugfs cleanup patches coming in through different
subsystem trees, and in that process the debugfs core was found that
it really should return errors when something bad happens, to prevent
random files from showing up in the root of debugfs afterward. So
debugfs was fixed up to handle this properly, and then two fixes for
the relay and blk-mq code was needed as it was making invalid
assumptions about debugfs return values.
There's also a cacheinfo fix in here that resolves a tiny issue.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
blk-mq: protect debugfs_create_files() from failures
relay: check return of create_buf_file() properly
debugfs: debugfs_lookup() should return NULL if not found
debugfs: return error values, not NULL
debugfs: fix debugfs_rename parameter checking
cacheinfo: Keep the old value if of_property_read_u32 fails
Linus Torvalds [Fri, 8 Feb 2019 18:51:59 +0000 (10:51 -0800)]
Merge tag 'staging-5.0-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some small iio and staging driver fixes for 5.0-rc6.
Nothing big, just resolve some reported IIO driver issues, and one
staging driver bug. One staging driver patch was added and then
reverted as well.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()"
staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()
staging: octeon: fix broken phylib usage
iio: ti-ads8688: Update buffer allocation for timestamps
tools: iio: iio_generic_buffer: make num_loops signed
iio: adc: axp288: Fix TS-pin handling
iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
Linus Torvalds [Fri, 8 Feb 2019 18:49:55 +0000 (10:49 -0800)]
Merge tag 'tty-5.0-rc6' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial fixes for 5.0-rc6.
Nothing huge, just a few small fixes for reported issues. The speakup
fix is in here as it is a tty operation issue.
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: fix race between flush_to_ldisc and tty_open
staging: speakup: fix tty-operation NULL derefs
serial: sh-sci: Do not free irqs that have already been freed
serial: 8250_pci: Make PCI class test non fatal
tty: serial: 8250_mtk: Fix potential NULL pointer dereference
Linus Torvalds [Fri, 8 Feb 2019 18:48:26 +0000 (10:48 -0800)]
Merge tag 'usb-5.0-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Grek KH:
"Here are some small USB fixes for 5.0-rc6.
Nothing huge, the normal amount of USB gadget fixes as well as some
USB phy fixes. There's also a typec fix as well. Full details are in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Correct the PPS out_volt calculation
usb: gadget: musb: fix short isoc packets with inventra dma
usb: phy: am335x: fix race condition in _probe
usb: dwc3: exynos: Fix error handling of clk_prepare_enable
usb: phy: fix link errors
usb: gadget: udc: net2272: Fix bitwise and boolean operations
usb: dwc3: gadget: Handle 0 xfer length for OUT EP
Linus Torvalds [Fri, 8 Feb 2019 18:46:14 +0000 (10:46 -0800)]
Merge tag 'xfs-5.0-fixes-1' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are a handful of XFS fixes to fix a data corruption problem, a
crasher bug, and a deadlock.
Summary:
- Fix cache coherency problem with writeback mappings
- Fix buffer deadlock when shutting fs down
- Fix a null pointer dereference when running online repair"
* tag 'xfs-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: set buffer ops when repair probes for btree type
xfs: end sync buffer I/O properly on shutdown error
xfs: eof trim writeback mapping as soon as it is cached
Linus Torvalds [Fri, 8 Feb 2019 18:43:15 +0000 (10:43 -0800)]
Merge tag 'drm-fixes-2019-02-08' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Missed fixes last week as had nothing until amdgpu showed up on
Saturday. Other stuff has since rolled in along with some more amdgpu
fixes, so we have two weeks of those, and some i915, vmwgfx, sun4i,
rockchip and omap fixes.
amdgpu/radeon:
- fix crash on passthrough for SI
- fencing fix for shared buffers
- APU hwmon fix
- API powerplay fix
- eDP freesync fix
- PASID mgr locking fix
- KFD warning fix
- DC/powerplay fix
- raven revision ids fix
- vega20 doorbell fix
i915:
- SNB display fix
- SKL srckey mask fix
- ICL DDI clock selection fix
vmwgfx:
- DMA API fix
- IOMMU detection fix
- display fixes
sun4i:
- tcon clock fix
rockchip:
- SPDX identifier fix
omap:
- DSI fixes"
* tag 'drm-fixes-2019-02-08' of git://anongit.freedesktop.org/drm/drm: (28 commits)
drm/omap: dsi: Hack-fix DSI bus flags
drm/omap: dsi: Fix OF platform depopulate
drm/omap: dsi: Fix crash in DSI debug dumps
drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSen
drm/amd/display: Attach VRR properties for eDP connectors
drm/amdkfd: Fix if preprocessor statement above kfd_fill_iolink_info_for_cpu
drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr
drm/i915: always return something on DDI clock selection
drm/i915: Fix skl srckey mask bits
drm/vmwgfx: Improve on IOMMU detection
drm/vmwgfx: Fix setting of dma masks
drm/vmwgfx: Also check for crtc status while checking for DU active
drm/vmwgfx: Fix an uninitialized fence handle value
drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user
drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init
drm/amdgpu: fix the incorrect external id for raven series
drm/amdgpu: Implement doorbell self-ring for NBIO 7.4
drm/amd/display: Fix fclk idle state
drm/amdgpu: Transfer fences to dmabuf importer
drm/amd/powerplay: Fix missing break in switch
...
Lukas Bulwahn [Sat, 12 Jan 2019 09:07:23 +0000 (10:07 +0100)]
MAINTAINERS: unify reference to xen-devel list
In the linux kernel MAINTAINERS file, largely
"xen-devel@lists.xenproject.org (moderated for non-subscribers)"
is used to refer to the xen-devel mailing list.
The DRM DRIVERS FOR XEN section entry mentions
xen-devel@lists.xen.org instead, but that is just the same
mailing list as the mailing list above.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Arun Parameswaran [Fri, 8 Feb 2019 00:01:18 +0000 (16:01 -0800)]
net: dsa: b53: Fix for failure when irq is not defined in dt
Fixes the issues with non BCM58XX chips in the b53 driver
failing, when the irq is not specified in the device tree.
Removed the check for BCM58XX in b53_srab_prepare_irq(),
so the 'port->irq' will be set to '-EXIO' if the irq is not
specified in the device tree.
Fixes:
16994374a6fc ("net: dsa: b53: Make SRAB driver manage port interrupts")
Fixes:
b2ddc48a81b5 ("net: dsa: b53: Do not fail when IRQ are not initialized")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Fri, 8 Feb 2019 00:32:47 +0000 (10:32 +1000)]
Merge tag 'drm-misc-fixes-2019-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.0-rc6:
- Fixes to omap/dsi encoder.
- Clock fix for sun4i.
- Licensing header fix for rockchip.
- Fix division by zero in the mode when trying to set a mode on
i915 with GVT-g enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84462cef-609f-e2af-084a-f9fe2b05c53e@linux.intel.com
Dave Airlie [Fri, 8 Feb 2019 00:30:29 +0000 (10:30 +1000)]
Merge tag 'drm-intel-fixes-2019-02-07-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.0-rc6:
- SNB DPLL sanitize
- ICL DDI clock selection
- SLK srckey mask
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lg2s6nur.fsf@intel.com
Linus Torvalds [Thu, 7 Feb 2019 22:54:45 +0000 (15:54 -0700)]
Merge tag 'platform-drivers-x86-v5.0-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixlet from Darren Hart:
"Correct Documentation/ABI 4.21 KernelVersion to 5.0"
* tag 'platform-drivers-x86-v5.0-2' of git://git.infradead.org/linux-platform-drivers-x86:
Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0
Linus Torvalds [Thu, 7 Feb 2019 22:53:26 +0000 (15:53 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Three security fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
Linus Torvalds [Thu, 7 Feb 2019 22:44:45 +0000 (15:44 -0700)]
Merge tag 'nfsd-5.0-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two small nfsd bugfixes for 5.0, for an RDMA bug and a file clone bug"
* tag 'nfsd-5.0-1' of git://linux-nfs.org/~bfields/linux:
svcrdma: Remove max_sge check at connect time
nfsd: Fix error return values for nfsd4_clone_file_range()
Linus Torvalds [Thu, 7 Feb 2019 22:42:43 +0000 (15:42 -0700)]
Merge tag 'for-5.0/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Both of these fixes address issues in changes merged for 5.0-rc4:
- Fix DM core's missing memory barrier before waitqueue_active()
calls.
- Fix DM core's clone_bio() to work when cloning a subset of a bio
with an integrity payload; bio_integrity_trim() wasn't getting
called due to bio_trim()'s early return"
* tag 'for-5.0/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: don't use bio_trim() afterall
dm: add memory barrier before waitqueue_active
Jan Kara [Thu, 7 Feb 2019 10:55:39 +0000 (11:55 +0100)]
blktrace: Show requests without sector
Currently, blktrace will not show requests that don't have any data as
rq->__sector is initialized to -1 which is out of device range and thus
discarded by act_log_check(). This is most notably the case for cache
flush requests sent to the device. Fix the problem by making
blk_rq_trace_sector() return 0 for requests without initialized sector.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Vladimir Kondratiev [Wed, 6 Feb 2019 11:46:17 +0000 (13:46 +0200)]
mips: cm: reprime error cause
Accordingly to the documentation
---cut---
The GCR_ERROR_CAUSE.ERR_TYPE field and the GCR_ERROR_MULT.ERR_TYPE
fields can be cleared by either a reset or by writing the current
value of GCR_ERROR_CAUSE.ERR_TYPE to the
GCR_ERROR_CAUSE.ERR_TYPE register.
---cut---
Do exactly this. Original value of cm_error may be safely written back;
it clears error cause and keeps other bits untouched.
Fixes:
3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v4.3+
Yifeng Li [Wed, 6 Feb 2019 07:07:21 +0000 (15:07 +0800)]
mips: loongson64: remove unreachable(), fix loongson_poweroff().
On my Yeeloong 8089, I noticed the machine fails to shutdown
properly, and often, the function mach_prepare_reboot() is
unexpectedly executed, thus the machine reboots instead. A
wait loop is needed to ensure the system is in a well-defined
state before going down.
In commit
997e93d4df16 ("MIPS: Hang more efficiently on
halt/powerdown/restart"), a general superset of the wait loop for all
platforms is already provided, so we don't need to implement our own.
This commit simply removes the unreachable() compiler marco after
mach_prepare_reboot(), thus allowing the execution of machine_hang().
My test shows that the machine is now able to shutdown successfully.
Please note that there are two different bugs preventing the machine
from shutting down, another work-in-progress commit is needed to
fix a lockup in cpufreq / i8259 driver, please read Reference, this
commit does not fix that bug.
Reference: https://lkml.org/lkml/2019/2/5/908
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org # v4.17+
David S. Miller [Thu, 7 Feb 2019 18:48:42 +0000 (10:48 -0800)]
Merge branch 'ipv6-fixes'
Hangbin Liu says:
====================
fix two kernel panics when disabled IPv6 on boot up
When disabled IPv6 on boot up, since there is no ipv6 route tables, we should
not call rt6_lookup. Fix them by checking if we have inet6_dev pointer on
netdevice.
v2: Fix idev reference leak, declarations and code mixing as Stefano,
Eric pointed. Since we only want to check if idev exists and not
reference it, use __in6_dev_get() insteand of in6_dev_get().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 7 Feb 2019 10:36:11 +0000 (18:36 +0800)]
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should
not call ip6_err_gen_icmpv6_unreach(). This:
ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1
ip link set sit1 up
ip addr add 198.51.100.1/24 dev sit1
ping 198.51.100.2
if IPv6 is disabled at boot time, will crash the kernel.
v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead,
as we only need to check that idev exists and we are under
rcu_read_lock() (from netif_receive_skb_internal()).
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes:
ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error")
Cc: Oussama Ghorbel <ghorbel@pivasoftware.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 7 Feb 2019 10:36:10 +0000 (18:36 +0800)]
geneve: should not call rt6_lookup() when ipv6 was disabled
When we add a new GENEVE device with IPv6 remote, checking only for
IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the
kernel command line (ipv6.disable=1), and calling rt6_lookup() would
cause a NULL pointer dereference.
v2:
- don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet)
- there's no need to use in6_dev_get() as we only need to check that
idev exists (reported by David Ahern). This is under RTNL, so we can
simply use __in6_dev_get() instead (Stefano, Eric).
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes:
c40e89fd358e9 ("geneve: configure MTU based on a lower device")
Cc: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Shier [Thu, 11 Oct 2018 18:46:46 +0000 (11:46 -0700)]
KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
Bugzilla:
1671904
There are multiple code paths where an hrtimer may have been started to
emulate an L1 VMX preemption timer that can result in a call to free_nested
without an intervening L2 exit where the hrtimer is normally
cancelled. Unconditionally cancel in free_nested to cover all cases.
Embargoed until Feb 7th 2019.
Signed-off-by: Peter Shier <pshier@google.com>
Reported-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Cc: stable@kernel.org
Message-Id: <
20181011184646.154065-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Jan 2019 17:41:16 +0000 (18:41 +0100)]
KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
Bugzilla:
1671930
Emulation of certain instructions (VMXON, VMCLEAR, VMPTRLD, VMWRITE with
memory operand, INVEPT, INVVPID) can incorrectly inject a page fault
when passed an operand that points to an MMIO address. The page fault
will use uninitialized kernel stack memory as the CR2 and error code.
The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just
ensure that the error code and CR2 are zero.
Embargoed until Feb 7th 2019.
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jann Horn [Sat, 26 Jan 2019 00:54:33 +0000 (01:54 +0100)]
kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
kvm_ioctl_create_device() does the following:
1. creates a device that holds a reference to the VM object (with a borrowed
reference, the VM's refcount has not been bumped yet)
2. initializes the device
3. transfers the reference to the device to the caller's file descriptor table
4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real
reference
The ownership transfer in step 3 must not happen before the reference to the VM
becomes a proper, non-borrowed reference, which only happens in step 4.
After step 3, an attacker can close the file descriptor and drop the borrowed
reference, which can cause the refcount of the kvm object to drop to zero.
This means that we need to grab a reference for the device before
anon_inode_getfd(), otherwise the VM can disappear from under us.
Fixes:
852b6d57dc7f ("kvm: add device control API")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eric W. Biederman [Wed, 6 Feb 2019 23:51:47 +0000 (17:51 -0600)]
signal: Better detection of synchronous signals
Recently syzkaller was able to create unkillablle processes by
creating a timer that is delivered as a thread local signal on SIGHUP,
and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing
to deliver SIGHUP but always trying.
When the stack overflows delivery of SIGHUP fails and force_sigsegv is
called. Unfortunately because SIGSEGV is numerically higher than
SIGHUP next_signal tries again to deliver a SIGHUP.
From a quality of implementation standpoint attempting to deliver the
timer SIGHUP signal is wrong. We should attempt to deliver the
synchronous SIGSEGV signal we just forced.
We can make that happening in a fairly straight forward manner by
instead of just looking at the signal number we also look at the
si_code. In particular for exceptions (aka synchronous signals) the
si_code is always greater than 0.
That still has the potential to pick up a number of asynchronous
signals as in a few cases the same si_codes that are used
for synchronous signals are also used for asynchronous signals,
and SI_KERNEL is also included in the list of possible si_codes.
Still the heuristic is much better and timer signals are definitely
excluded. Which is enough to prevent all known ways for someone
sending a process signals fast enough to cause unexpected and
arguably incorrect behavior.
Cc: stable@vger.kernel.org
Fixes:
a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals")
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Eric W. Biederman [Thu, 7 Feb 2019 00:39:40 +0000 (18:39 -0600)]
signal: Always notice exiting tasks
Recently syzkaller was able to create unkillablle processes by
creating a timer that is delivered as a thread local signal on SIGHUP,
and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop
failing to deliver SIGHUP but always trying.
Upon examination it turns out part of the problem is actually most of
the solution. Since 2.5 signal delivery has found all fatal signals,
marked the signal group for death, and queued SIGKILL in every threads
thread queue relying on signal->group_exit_code to preserve the
information of which was the actual fatal signal.
The conversion of all fatal signals to SIGKILL results in the
synchronous signal heuristic in next_signal kicking in and preferring
SIGHUP to SIGKILL. Which is especially problematic as all
fatal signals have already been transformed into SIGKILL.
Instead of dequeueing signals and depending upon SIGKILL to
be the first signal dequeued, first test if the signal group
has already been marked for death. This guarantees that
nothing in the signal queue can prevent a process that needs
to exit from exiting.
Cc: stable@vger.kernel.org
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Ref:
ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Linus Torvalds [Thu, 7 Feb 2019 11:51:31 +0000 (11:51 +0000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
"A fix for a bug in hid-debug that can lock up the kernel in infinite
loop (CVE-2019-3819), from Vladis Dronov"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: debug: fix the ring buffer implementation
Erik Schmauss [Wed, 6 Feb 2019 00:14:00 +0000 (16:14 -0800)]
ACPI: Set debug output flags independent of ACPICA
There was a divergence between Linux and ACPICA on the definition of
ACPI_DEBUG_DEFAULT. This divergence was solved by taking ACPICA's
definition in
4c1379d7bb42. After resolving the divergence, it was
clear that Linux users wanted to use their old set of debug flags.
This change fixes the divergence by setting these debug flags during
acpi_early_init() rather than during global variable initialization
in acpixf.h (owned by ACPICA).
Fixes:
4c1379d7bb42 ("ACPICA: Debug output: Add option to display method/object evaluation")
Reported-by: Michael J Ruhl <michael.j.ruhl@intel.com>
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Thu, 7 Feb 2019 08:33:56 +0000 (08:33 +0000)]
Merge tag 'sound-5.0-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of a few small fixes.
The most significant one is the fix for the possible race at loading
HD-audio drivers. This has been present for long time and surfaced
only in a rare occasion, but finally spotted out"
* tag 'sound-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/ca0132 - Fix build error without CONFIG_PCI
ALSA: compress: Fix stop handling on compressed capture streams
ALSA: usb-audio: Add support for new T+A USB DAC
ALSA: hda - Serialize codec registrations
ALSA: hda/realtek - Use a common helper for hp pin reference
ALSA: hda/realtek - Fix lose hp_pins for disable auto mute
ALSA: hda/realtek - Headset microphone support for System76 darp5
Linus Torvalds [Thu, 7 Feb 2019 08:05:28 +0000 (08:05 +0000)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A small fix for a uapi header, and a fix for VDPA for non-x86 guests"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: drop internal struct from UAPI
virtio: support VIRTIO_F_ORDER_PLATFORM
Linus Torvalds [Thu, 7 Feb 2019 07:59:01 +0000 (07:59 +0000)]
Merge tag 'trace-v5.0-rc3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This has two fixes for uprobe code.
- Cut and paste fix to have uprobe printks say "uprobe" and not
"kprobe"
- Add terminating '\0' byte when copying function arguments"
* tag 'trace-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/uprobes: Fix output for multiple string arguments
tracing: uprobes: Fix typo in pr_fmt string
Linus Torvalds [Thu, 7 Feb 2019 07:52:08 +0000 (07:52 +0000)]
Merge tag 'fuse-fixes-5.0-rc6' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"A fix for a CUSE regression introduced in v4.20, as well as fixes for
a couple of old bugs"
* tag 'fuse-fixes-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: decrement NR_WRITEBACK_TEMP on the right page
fuse: call pipe_buf_release() under pipe lock
cuse: fix ioctl
fuse: handle zero sized retrieve correctly
Linus Torvalds [Thu, 7 Feb 2019 07:47:08 +0000 (07:47 +0000)]
Merge tag 'pinctrl-v5.0-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Mediatek Kconfig fix
- Sunxi regulator, IRQ banks and pin base fixup
- Intel Cherryview Strago DMI workaround
- Potential regmap problem on mcp23s08
* tag 'pinctrl-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: Correct number of IRQ banks on H6 main pin controller
pinctrl: mcp23s08: spi: Fix regmap allocation for mcp23s18
pinctrl: cherryview: fix Strago DMI workaround
pinctrl: sunxi: Consider pin_base when calculating regulator array index
pinctrl: sunxi: Fix and simplify pin bank regulator handling
pinctrl: mediatek: fix Kconfig build errors for moore core
Bjorn Helgaas [Tue, 5 Feb 2019 20:47:21 +0000 (14:47 -0600)]
net: Don't default Cavium PTP driver to 'y'
8c56df372bc1 ("net: add support for Cavium PTP coprocessor") added the
Cavium PTP coprocessor driver and enabled it by default. Remove the
"default y" because the driver only applies to Cavium ThunderX processors.
Fixes:
8c56df372bc1 ("net: add support for Cavium PTP coprocessor")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:25:54 +0000 (00:25 +0800)]
net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in sbdma_tx_process() when
skb xmit done. It makes drop profiles(dropwatch, perf) more
friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:22:54 +0000 (00:22 +0800)]
net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in velocity_free_tx_buf()
when skb xmit done. It makes drop profiles(dropwatch, perf) more
friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:21:31 +0000 (00:21 +0800)]
net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in bdx_tx_cleanup() when skb
xmit done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:19:44 +0000 (00:19 +0800)]
net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called when skb xmit done. It makes
drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:14:51 +0000 (00:14 +0800)]
net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in hdlc_tx_done() when skb
xmit done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:12:04 +0000 (00:12 +0800)]
net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in mpc52xx_fec_tx_interrupt()
when skb xmit done. It makes drop profiles(dropwatch, perf) more
friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:09:41 +0000 (00:09 +0800)]
net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in epic_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:07:03 +0000 (00:07 +0800)]
net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in dscc4_tx_irq() when skb
xmit done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:03:51 +0000 (00:03 +0800)]
net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in de_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Tue, 5 Feb 2019 16:01:04 +0000 (00:01 +0800)]
net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
dev_consume_skb_irq() should be called in dfx_xmt_done() when skb
xmit done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tonghao Zhang [Mon, 28 Jan 2019 23:28:06 +0000 (15:28 -0800)]
net/mlx5e: Don't overwrite pedit action when multiple pedit used
In some case, we may use multiple pedit actions to modify packets.
The command shown as below: the last pedit action is effective.
$ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \
flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \
action pedit ex munge ip dst set 192.168.1.100 pipe \
action pedit ex munge eth src set 00:00:00:00:00:01 pipe \
action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \
action csum ip pipe \
action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \
action mirred egress redirect dev vxlan0
To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction,
max_mod_hdr_actions will store the max pedit action number we support and
num_mod_hdr_actions indicates how many pedit action we used, and store all
pedit action to mod_hdr_actions.
Fixes:
d79b6df6b10a ("net/mlx5e: Add parsing of TC pedit actions to HW format")
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tonghao Zhang [Mon, 28 Jan 2019 23:28:05 +0000 (15:28 -0800)]
net/mlx5e: Update hw flows when encap source mac changed
When we offload tc filters to hardware, hardware flows can
be updated when mac of encap destination ip is changed.
But we ignore one case, that the mac of local encap ip can
be changed too, so we should also update them.
To fix it, add route_dev in mlx5e_encap_entry struct to save
the local encap netdevice, and when mac changed, kernel will
flush all the neighbour on the netdevice and send NETEVENT_NEIGH_UPDATE
event. The mlx5 driver will delete the flows and add them when neighbour
available again.
Fixes:
232c001398ae ("net/mlx5e: Add support to neighbour update flow")
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Feb 2019 00:53:33 +0000 (16:53 -0800)]
Merge branch 'qed-Bug-fixes'
Manish Chopra says:
====================
qed*: Bug fixes.
This series contains general qed/qede fixes.
Please consider applying this to "net"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Wed, 6 Feb 2019 22:43:47 +0000 (14:43 -0800)]
qed*: Advance drivers version to 8.37.0.20
Version update for qed/qede modules.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Verma [Wed, 6 Feb 2019 22:43:46 +0000 (14:43 -0800)]
qed: Change verbosity for coalescing message.
Fix unnecessary logging of message in an expected
default case where coalescing value read (via ethtool -c)
migh not be valid unless they are configured explicitly
in the hardware using ethtool -C.
Signed-off-by: Rahul Verma <rverma@marvell.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudarsana Reddy Kalluru [Wed, 6 Feb 2019 22:43:45 +0000 (14:43 -0800)]
qede: Fix system crash on configuring channels.
Under heavy traffic load, when changing number of channels via
ethtool (ethtool -L) which will cause interface to be reloaded,
it was observed that some packets gets transmitted on old TX
channel/queue id which doesn't really exist after the channel
configuration leads to system crash.
Add a safeguard in the driver by validating queue id through
ndo_select_queue() which is called before the ndo_start_xmit().
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudarsana Reddy Kalluru [Wed, 6 Feb 2019 22:43:44 +0000 (14:43 -0800)]
qed: Consider TX tcs while deriving the max num_queues for PF.
Max supported queues is derived incorrectly in the case of multi-CoS.
Need to consider TCs while calculating num_queues for PF.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudarsana Reddy Kalluru [Wed, 6 Feb 2019 22:43:43 +0000 (14:43 -0800)]
qed: Assign UFP TC value to vlan priority in UFP mode.
In the case of Unified Fabric Port (UFP) mode, switch provides
the traffic class (TC) value to be used for the traffic.
Configure hardware to use this TC value for vlan priority.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Wed, 6 Feb 2019 22:43:42 +0000 (14:43 -0800)]
qed: Fix EQ full firmware assert.
When slowpath messages are sent with high rate, the resulting
events can lead to a FW assert in case they are not handled fast
enough (Event Queue Full assert). Attempt to send queued slowpath
messages only after the newly evacuated entries in the EQ ring
are indicated to FW.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Thu, 7 Feb 2019 00:36:43 +0000 (10:36 +1000)]
Merge branch 'vmwgfx-fixes-5.0-2' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A patch set from Christoph for vmwgfx dma mode detection breakage with the
new dma code restructuring in 5.0
A couple of fixes also CC'd stable
Finally an improved IOMMU detection that automatically enables dma mapping
also with other vIOMMUS than the intel one if present and enabled.
Currently trying to start a VM in that case would fail catastrophically.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206194735.4663-1-thellstrom@vmware.com
Dave Airlie [Thu, 7 Feb 2019 00:25:27 +0000 (10:25 +1000)]
Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- Fix missing freesync properties on eDP
- Fix locking in pasid mgr
- Fix clang warning in kfd
- DC/powerplay fix
- Fix reported rev ids on raven
- Doorbell fix for vega20
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205231301.3815-1-alexander.deucher@amd.com
Thinh Nguyen [Wed, 6 Feb 2019 23:17:27 +0000 (17:17 -0600)]
PCI: Work around Synopsys duplicate Device ID (HAPS USB3, NXP i.MX)
There are at least four different parts with the same Vendor and Device
ID ([16c3:abcd]):
1) Synopsys HAPS USB3 controller
2) Synopsys PCIe Root Port in Freescale/NXP i.MX6Q (reported by Lucas)
3) Synopsys PCIe Root Port in Freescale/NXP i.MX6QP (reported by Lukas)
4) Synopsys PCIe Root Port in Freescale/NXP i.MX7D (reported by Trent)
The HAPS USB3 controller has a Class Code of PCI_CLASS_SERIAL_USB_XHCI,
which means the XHCI driver would normally claim it. Previously,
quirk_synopsys_haps() changed the Class Code of all [16c3:abcd] devices,
including the Root Ports, to PCI_CLASS_SERIAL_USB_DEVICE to prevent the
XHCI driver from claiming them so dwc3-haps can claim them instead.
Changing the Class Code of the Root Ports prevents the PCI core from
handling them as bridges, so devices below them don't work.
Restrict the quirk so it only changes the Class Code for devices that start
with the PCI_CLASS_SERIAL_USB_XHCI Class Code, leaving the Root Ports
alone.
Fixes:
03e6742584af ("PCI: Override Synopsys USB 3.x HAPS device class")
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Reported-by: Trent Piepho <tpiepho@impinj.com>
Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Mike Snitzer [Tue, 5 Feb 2019 22:07:58 +0000 (17:07 -0500)]
dm: don't use bio_trim() afterall
bio_trim() has an early return, which makes it _not_ idempotent, if the
offset is 0 and the bio's bi_size already matches the requested size.
Prior to DM, all users of bio_trim() were fine with this. But DM has
exposed the fact that bio_trim()'s early return is incompatible with a
cloned bio whose integrity payload must be trimmed via
bio_integrity_trim().
Fix this by reverting DM back to doing the equivalent of bio_trim() but
in an idempotent manner (so bio_integrity_trim is always performed).
Follow-on work is needed to assess what benefit bio_trim()'s early
return is providing to its existing callers.
Reported-by: Milan Broz <gmazyland@gmail.com>
Fixes:
57c36519e4b94 ("dm: fix clone_bio() to trigger blk_recount_segments()")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Mikulas Patocka [Tue, 5 Feb 2019 10:09:00 +0000 (05:09 -0500)]
dm: add memory barrier before waitqueue_active
Block core changes to switch bio-based IO accounting to be percpu had a
side-effect of altering DM core to now rely on calling waitqueue_active
(in both bio-based and request-based) to check if another task is in
dm_wait_for_completion().
A memory barrier is needed before calling waitqueue_active(). DM core
doesn't piggyback on a preceding memory barrier so it must explicitly
use its own.
For more details on why using waitqueue_active() without a preceding
barrier is unsafe, please see the comment before the waitqueue_active()
definition in include/linux/wait.h.
Add the missing memory barrier by switching to using wq_has_sleeper().
Fixes:
6f75723190d8 ("dm: remove the pending IO accounting")
Fixes:
c4576aed8d85 ("dm: fix request-based dm's use of dm_wait_for_completion")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Dan Carpenter [Wed, 6 Feb 2019 15:35:15 +0000 (18:35 +0300)]
net: dsa: Fix NULL checking in dsa_slave_set_eee()
This function can't succeed if dp->pl is NULL. It will Oops inside the
call to return phylink_ethtool_get_eee(dp->pl, e);
Fixes:
1be52e97ed3e ("dsa: slave: eee: Allow ports to use phylink")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chuck Lever [Fri, 25 Jan 2019 21:54:54 +0000 (16:54 -0500)]
svcrdma: Remove max_sge check at connect time
Two and a half years ago, the client was changed to use gathered
Send for larger inline messages, in commit
655fec6987b ("xprtrdma:
Use gathered Send for large inline messages"). Several fixes were
required because there are a few in-kernel device drivers whose
max_sge is 3, and these were broken by the change.
Apparently my memory is going, because some time later, I submitted
commit
25fd86eca11c ("svcrdma: Don't overrun the SGE array in
svc_rdma_send_ctxt"), and after that, commit
f3c1fd0ee294 ("svcrdma:
Reduce max_send_sges"). These too incorrectly assumed in-kernel
device drivers would have more than a few Send SGEs available.
The fix for the server side is not the same. This is because the
fundamental problem on the server is that, whether or not the client
has provisioned a chunk for the RPC reply, the server must squeeze
even the most complex RPC replies into a single RDMA Send. Failing
in the send path because of Send SGE exhaustion should never be an
option.
Therefore, instead of failing when the send path runs out of SGEs,
switch to using a bounce buffer mechanism to handle RPC replies that
are too complex for the device to send directly. That allows us to
remove the max_sge check to enable drivers with small max_sge to
work again.
Reported-by: Don Dutile <ddutile@redhat.com>
Fixes:
25fd86eca11c ("svcrdma: Don't overrun the SGE array in ...")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Trond Myklebust [Mon, 21 Jan 2019 20:58:38 +0000 (15:58 -0500)]
nfsd: Fix error return values for nfsd4_clone_file_range()
If the parameter 'count' is non-zero, nfsd4_clone_file_range() will
currently clobber all errors returned by vfs_clone_file_range() and
replace them with EINVAL.
Fixes:
42ec3d4c0218 ("vfs: make remap_file_range functions take and...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Tetsuo Handa [Mon, 21 Jan 2019 13:49:37 +0000 (22:49 +0900)]
fs: ratelimit __find_get_block_slow() failure message.
When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.
[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.873324][T15342] b_state=0x00000029, b_size=512
[ 399.878403][T15342] device loop0 blocksize: 4096
[ 399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.890400][T15342] b_state=0x00000029, b_size=512
[ 399.895595][T15342] device loop0 blocksize: 4096
[ 399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
[ 399.907471][T15342] b_state=0x00000029, b_size=512
[ 399.912506][T15342] device loop0 blocksize: 4096
This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.
[ 399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Russell King [Wed, 6 Feb 2019 10:54:54 +0000 (10:54 +0000)]
MAINTAINERS: add maintainer for SFF/SFP/SFP+ support
Add maintainer entry for SFF/SFP/SFP+ support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chengguang Xu [Fri, 1 Feb 2019 03:26:02 +0000 (11:26 +0800)]
m68k: set proper major_num when specifying module param major_num
When calling register_blkdev() with specified major
device number, the return code is 0 on success.
So it seems not correct direct assign return code to
variable major_num in this case.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans de Goede [Sun, 3 Feb 2019 09:02:07 +0000 (10:02 +0100)]
libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD
We've received a bugreport that using LPM with a SAMSUNG
MZ7TE512HMHP-000L1 SSD leads to system instability, we already have
a quirk for the MZ7TD256HAFV-000L9, which is also a Samsun EVO 840 /
PM851 OEM model, so it seems some of these models have a LPM issue.
This commits adds a NOLPM quirk for the model string from the new
bugeport, to avoid the reported stability issues.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eric Dumazet [Mon, 4 Feb 2019 16:36:06 +0000 (08:36 -0800)]
rxrpc: bad unlock balance in rxrpc_recvmsg
When either "goto wait_interrupted;" or "goto wait_error;"
paths are taken, socket lock has already been released.
This patch fixes following syzbot splat :
WARNING: bad unlock balance detected!
5.0.0-rc4+ #59 Not tainted
-------------------------------------
syz-executor223/8256 is trying to release lock (sk_lock-AF_RXRPC) at:
[<
ffffffff86651353>] rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598
but there are no more locks to release!
other info that might help us debug this:
1 lock held by syz-executor223/8256:
#0:
00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline]
#0:
00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2798
stack backtrace:
CPU: 1 PID: 8256 Comm: syz-executor223 Not tainted 5.0.0-rc4+ #59
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_unlock_imbalance_bug kernel/locking/lockdep.c:3391 [inline]
print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3368
__lock_release kernel/locking/lockdep.c:3601 [inline]
lock_release+0x67e/0xa00 kernel/locking/lockdep.c:3860
sock_release_ownership include/net/sock.h:1471 [inline]
release_sock+0x183/0x1c0 net/core/sock.c:2808
rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598
sock_recvmsg_nosec net/socket.c:794 [inline]
sock_recvmsg net/socket.c:801 [inline]
sock_recvmsg+0xd0/0x110 net/socket.c:797
__sys_recvfrom+0x1ff/0x350 net/socket.c:1845
__do_sys_recvfrom net/socket.c:1863 [inline]
__se_sys_recvfrom net/socket.c:1859 [inline]
__x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:1859
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446379
Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007fe5da89fd98 EFLAGS:
00000246 ORIG_RAX:
000000000000002d
RAX:
ffffffffffffffda RBX:
00000000006dbc28 RCX:
0000000000446379
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000003
RBP:
00000000006dbc20 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000006dbc2c
R13:
0000000000000000 R14:
0000000000000000 R15:
20c49ba5e353f7cf
Fixes:
248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jens Axboe [Wed, 6 Feb 2019 15:43:07 +0000 (08:43 -0700)]
Merge branch 'nvme-5.0' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph for this release.
* 'nvme-5.0' of git://git.infradead.org/nvme:
nvme-pci: fix rapid add remove sequence
nvme: lock NS list changes while handling command effects
Keith Busch [Thu, 24 Jan 2019 01:46:11 +0000 (18:46 -0700)]
nvme-pci: fix rapid add remove sequence
A surprise removal may fail to tear down request queues if it is racing
with the initial asynchronous probe. If that happens, the remove path
won't see the queue resources to tear down, and the controller reset
path may create a new request queue on a removed device, but will not
be able to make forward progress, deadlocking the pci removal.
Protect setting up non-blocking resources from a shutdown by holding the
same mutex, and transition to the CONNECTING state after these resources
are initialized so the probe path may see the dead controller state
before dispatching new IO.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Mon, 28 Jan 2019 16:46:07 +0000 (09:46 -0700)]
nvme: lock NS list changes while handling command effects
If a controller supports the NS Change Notification, the namespace
scan_work is automatically triggered after attaching a new namespace.
Occasionally the namespace scan_work may append the new namespace to the
list before the admin command effects handling is completed. The effects
handling unfreezes namespaces, but if it unfreezes the newly attached
namespace, its request_queue freeze depth will be off and we'll hit the
warning in blk_mq_unfreeze_queue().
On the next namespace add, we will fail to freeze that queue due to the
previous bad accounting and deadlock waiting for frozen.
Fix that by preventing scan work from altering the namespace list while
command effects handling needs to pair freeze with unfreeze.
Reported-by: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Mike Marshall [Tue, 5 Feb 2019 19:13:35 +0000 (14:13 -0500)]
aio: initialize kiocb private in case any filesystems expect it.
A recent optimization had left private uninitialized.
Fixes:
2bc4ca9bb600 ("aio: don't zero entire aio_kiocb aio_get_req()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tomi Valkeinen [Fri, 11 Jan 2019 03:50:35 +0000 (05:50 +0200)]
drm/omap: dsi: Hack-fix DSI bus flags
Since commit
b4935e3a3cfa ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.
To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.
Fixes:
b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
Tomi Valkeinen [Fri, 11 Jan 2019 03:50:34 +0000 (05:50 +0200)]
drm/omap: dsi: Fix OF platform depopulate
Commit
edb715dffdee ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.
Fixes:
edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
Tomi Valkeinen [Fri, 11 Jan 2019 03:50:33 +0000 (05:50 +0200)]
drm/omap: dsi: Fix crash in DSI debug dumps
Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.
Fixes:
f3ed97f9ae7d ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
Martin Kepplinger [Tue, 5 Feb 2019 15:52:51 +0000 (16:52 +0100)]
mtd: rawnand: gpmi: fix MX28 bus master lockup problem
Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft
reset may cause bus master lock up") for MX28 too. It has the same
problem.
Observed problem: once per 100,000+ MX28 reboots NAND read failed on
DMA timeout errors:
[ 1.770823] UBI: attaching mtd3 to ubi0
[ 2.768088] gpmi_nand: DMA timeout, last DMA :1
[ 3.958087] gpmi_nand: BCH timeout, last DMA :1
[ 4.156033] gpmi_nand: Error in ECC-based read: -110
[ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64
bytes from PEB 0:0, read only 0 bytes, retry
[ 4.171283] step 1 error
[ 4.173846] gpmi_nand: Chip: 0, Error -1
Without BCH soft reset we successfully executed 1,000,000 MX28 reboots.
I have a quote from NXP regarding this problem, from July 18th 2016:
"As the i.MX23 and i.MX28 are of the same generation, they share many
characteristics. Unfortunately, also the erratas may be shared.
In case of the documented erratas and the workarounds, you can also
apply the workaround solution of one device on the other one. This have
been reported, but I’m afraid that there are not an estimated date for
updating the Errata documents.
Please accept our apologies for any inconveniences this may cause."
Fixes:
6f2a6a52560a ("mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems")
Cc: stable@vger.kernel.org
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Ville Syrjälä [Tue, 5 Feb 2019 14:18:46 +0000 (16:18 +0200)]
drm/i915: Try to sanitize bogus DPLL state left over by broken SNB BIOSen
Certain SNB machines (eg. ASUS K53SV) seem to have a broken BIOS
which misprograms the hardware badly when encountering a suitably
high resolution display. The programmed pipe timings are somewhat
bonkers and the DPLL is totally misprogrammed (P divider == 0).
That will result in atomic commit timeouts as apparently the pipe
is sufficiently stuck to not signal vblank interrupts.
IIRC something like this was also observed on some other SNB
machine years ago (might have been a Dell XPS 8300) but a BIOS
update cured it. Sadly looks like this was never fixed for the
ASUS K53SV as the latest BIOS (K53SV.320 11/11/2011) is still
broken.
The quickest way to deal with this seems to be to shut down
the pipe+ports+DPLL. Unfortunately doing this during the
normal sanitization phase isn't quite soon enough as we
already spew several WARNs about the bogus hardware state.
But it's better than hanging the boot for a few dozen seconds.
Since this is limited to a few old machines it doesn't seem
entirely worthwile to try and rework the readout+sanitization
code to handle it more gracefully.
v2: Fix potential NULL deref (kbuild test robot)
Constify has_bogus_dpll_config()
Cc: stable@vger.kernel.org # v4.20+
Cc: Daniel Kamil Kozar <dkk089@gmail.com>
Reported-by: Daniel Kamil Kozar <dkk089@gmail.com>
Tested-by: Daniel Kamil Kozar <dkk089@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109245
Fixes:
516a49cc1946 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111174950.10681-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit
7bed8adcd9f86231bb69bbc02f88ad89330f99e3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205141846.6053-1-ville.syrjala@linux.intel.com
Takashi Iwai [Tue, 5 Feb 2019 16:57:27 +0000 (17:57 +0100)]
ALSA: hda/ca0132 - Fix build error without CONFIG_PCI
A call of pci_iounmap() call without CONFIG_PCI leads to a build error
on some architectures. We tried to address this and add a check of
IS_ENABLED(CONFIG_PCI), but this still doesn't seem enough for sh.
Ideally we should fix it globally, it's really a corner case, so let's
paper over it with a simpler ifdef.
Fixes:
1e73359a24fa ("ALSA: hda/ca0132 - make pci_iounmap() call conditional")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Eric Dumazet [Tue, 5 Feb 2019 23:38:44 +0000 (15:38 -0800)]
mISDN: fix a race in dev_expire_timer()
Since mISDN_close() uses dev->pending to iterate over active
timers, there is a chance that one timer got removed from the
->pending list in dev_expire_timer() but that the thread
has not called yet wake_up_interruptible()
So mISDN_close() could miss this and free dev before
completion of at least one dev_expire_timer()
syzbot was able to catch this race :
BUG: KASAN: use-after-free in register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
Write of size 8 at addr
ffff88809fc18948 by task syz-executor1/24769
CPU: 1 PID: 24769 Comm: syz-executor1 Not tainted 5.0.0-rc5 #60
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_store8_noabort+0x17/0x20 mm/kasan/generic_report.c:140
register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
__lock_acquire+0x11f/0x4700 kernel/locking/lockdep.c:3224
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3841
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
__wake_up_common_lock+0xc7/0x190 kernel/sched/wait.c:120
__wake_up+0xe/0x10 kernel/sched/wait.c:145
dev_expire_timer+0xe4/0x3b0 drivers/isdn/mISDN/timerdev.c:174
call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
protocol 88fb is buggy, dev hsr_slave_0
protocol 88fb is buggy, dev hsr_slave_1
expire_timers kernel/time/timer.c:1362 [inline]
__run_timers kernel/time/timer.c:1681 [inline]
__run_timers kernel/time/timer.c:1649 [inline]
run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
__do_softirq+0x266/0x95a kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x180/0x1d0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
</IRQ>
RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:101
Code: 90 90 90 90 55 48 89 e5 48 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 98 12 92 7e 81 e2 00 01 1f 00 75 2b 8b 90 d8 12 00 00 <83> fa 02 75 20 48 8b 88 e0 12 00 00 8b 80 dc 12 00 00 48 8b 11 48
RSP: 0018:
ffff8880589b7a60 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffff13
RAX:
ffff888087ce25c0 RBX:
0000000000000001 RCX:
ffffffff818f8ca3
RDX:
0000000000000000 RSI:
ffffffff818f8b48 RDI:
0000000000000001
RBP:
ffff8880589b7a60 R08:
ffff888087ce25c0 R09:
ffffed1015d25bd0
R10:
ffffed1015d25bcf R11:
ffff8880ae92de7b R12:
ffffea0001ae4680
R13:
ffffea0001ae4688 R14:
0000000000000000 R15:
ffffea0001b41648
PageIdle include/linux/page-flags.h:398 [inline]
page_is_idle include/linux/page_idle.h:29 [inline]
mark_page_accessed+0x618/0x1140 mm/swap.c:398
touch_buffer fs/buffer.c:59 [inline]
__find_get_block+0x312/0xcc0 fs/buffer.c:1298
sb_find_get_block include/linux/buffer_head.h:338 [inline]
recently_deleted fs/ext4/ialloc.c:682 [inline]
find_inode_bit.isra.0+0x202/0x510 fs/ext4/ialloc.c:722
__ext4_new_inode+0x14ad/0x52c0 fs/ext4/ialloc.c:914
ext4_symlink+0x3f8/0xbe0 fs/ext4/namei.c:3096
vfs_symlink fs/namei.c:4126 [inline]
vfs_symlink+0x378/0x5d0 fs/namei.c:4112
do_symlinkat+0x22b/0x290 fs/namei.c:4153
__do_sys_symlink fs/namei.c:4172 [inline]
__se_sys_symlink fs/namei.c:4170 [inline]
__x64_sys_symlink+0x59/0x80 fs/namei.c:4170
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457b67
Code: 0f 1f 00 b8 5c 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 6d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 58 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 4d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007fff045ce0f8 EFLAGS:
00000202 ORIG_RAX:
0000000000000058
RAX:
ffffffffffffffda RBX:
0000000000000001 RCX:
0000000000457b67
RDX:
00007fff045ce173 RSI:
00000000004bd63f RDI:
00007fff045ce160
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000013
R10:
0000000000000075 R11:
0000000000000202 R12:
0000000000000000
R13:
0000000000000001 R14:
000000000000029b R15:
0000000000000001
Allocated by task 24763:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:496 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
kmalloc include/linux/slab.h:545 [inline]
mISDN_open+0x9a/0x270 drivers/isdn/mISDN/timerdev.c:59
misc_open+0x398/0x4c0 drivers/char/misc.c:141
chrdev_open+0x247/0x6b0 fs/char_dev.c:417
do_dentry_open+0x47d/0x1130 fs/open.c:771
vfs_open+0xa0/0xd0 fs/open.c:880
do_last fs/namei.c:3418 [inline]
path_openat+0x10d7/0x4690 fs/namei.c:3534
do_filp_open+0x1a1/0x280 fs/namei.c:3564
do_sys_open+0x3fe/0x5d0 fs/open.c:1063
__do_sys_openat fs/open.c:1090 [inline]
__se_sys_openat fs/open.c:1084 [inline]
__x64_sys_openat+0x9d/0x100 fs/open.c:1084
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 24762:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
__cache_free mm/slab.c:3487 [inline]
kfree+0xcf/0x230 mm/slab.c:3806
mISDN_close+0x2a1/0x390 drivers/isdn/mISDN/timerdev.c:97
__fput+0x2df/0x8d0 fs/file_table.c:278
____fput+0x16/0x20 fs/file_table.c:309
task_work_run+0x14a/0x1c0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:166
prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff88809fc18900
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 72 bytes inside of
192-byte region [
ffff88809fc18900,
ffff88809fc189c0)
The buggy address belongs to the page:
page:
ffffea00027f0600 count:1 mapcount:0 mapping:
ffff88812c3f0040 index:0xffff88809fc18000
flags: 0x1fffc0000000200(slab)
raw:
01fffc0000000200 ffffea000269f648 ffffea00029f7408 ffff88812c3f0040
raw:
ffff88809fc18000 ffff88809fc18000 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88809fc18800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88809fc18880: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>
ffff88809fc18900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88809fc18980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809fc18a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 5 Feb 2019 23:02:58 +0000 (00:02 +0100)]
net: dsa: mv88e6xxx: Fix counting of ATU violations
The ATU port vector contains a bit per port of the switch. The code
wrongly used it as a port number, and incremented a port counter. This
resulted in the wrong interfaces counter being incremented, and
potentially going off the end of the array of ports.
Fix this by using the source port ID for the violation, which really
is a port number.
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Tested-by: Chris Healy <Chris.Healy@zii.aero>
Fixes:
65f60e4582bd ("net: dsa: mv88e6xxx: Keep ATU/VTU violation statistics")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicholas Kazlauskas [Thu, 31 Jan 2019 18:58:21 +0000 (13:58 -0500)]
drm/amd/display: Attach VRR properties for eDP connectors
[Why]
eDP was missing in the checks for supported VRR connectors.
[How]
Attach the properties for eDP connectors too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202449
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nathan Chancellor [Mon, 21 Jan 2019 23:52:15 +0000 (16:52 -0700)]
drm/amdkfd: Fix if preprocessor statement above kfd_fill_iolink_info_for_cpu
Clang warns:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_crat.c:866:5: warning:
'CONFIG_X86_64' is not defined, evaluates to 0 [-Wundef]
^
1 warning generated.
Fixes:
d1c234e2cd10 ("drm/amdkfd: Allow building KFD on ARM64 (v2)")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 30 Jan 2019 20:21:16 +0000 (15:21 -0500)]
drm/amdgpu: use spin_lock_irqsave to protect vm_manager.pasid_idr
amdgpu_vm_get_task_info is called from interrupt handler and sched timeout
workqueue, we should use irq version spin_lock to avoid deadlock.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Boris Brezillon [Wed, 30 Jan 2019 11:55:52 +0000 (12:55 +0100)]
mtd: Make sure mtd->erasesize is valid even if the partition is of size 0
Commit
33f45c44d68b ("mtd: Do not allow MTD devices with inconsistent
erase properties") introduced a check to make sure ->erasesize and
->_erase values are consistent with the MTD_NO_ERASE flag.
This patch did not take the 0 bytes partition case into account which
can happen when the defined partition is outside the flash device memory
range. Fix that by setting the partition erasesize to the parent
erasesize.
Fixes:
33f45c44d68b ("mtd: Do not allow MTD devices with inconsistent erase properties")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>