Remove unneeded header files from source files throughout.

2008-04-07  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.tbl: Remove 4 extra blank lines.

* postinstall: Add function print_flags and call where appropriate.
Omit system and cygdrive flag when testing cygdrive flags.

add missing file

Introduce test setup helpers.
        * lib/gdb.exp (build_executable, clean_restart)
        (prepare_for_testing): New.
        * gdb.base/break.exp: Use prepare_for_testing, and clean_restart.
        * gdb.base/return.exp: Likewise.
        * gdb.base/ending-run.exp: Likewise.

Add miscfuncs.h to files as needed throughout.
* mount.cc: New file.
* path.cc: Move mount-specific stuff into mount.cc.  Move common stuff into
miscfuncs.cc.  Remove unneeded includes.
* miscfuncs.cc: Move some common path functions here.
* miscfuncs.h: New file.
* winsup.h: Move miscelleneous functions to miscfuncs.h.
* dcrt0.cc: Remove unneeded includes.
* Makefile.in (DLL_OFILES): Add mount.o.
* include/cygwin/config.h: Fix a minor typo.

Add the missing ymm test in the last checkin.

* postinstall: Set IFS to LF only.  Change while loop in subshell to
for loop in parent shell.  Add code to read system mount points and
system cygdrive prefix from registry and append them to /etc/fstab.

* elf32-spu.c (allocate_spuear_stubs): Ensure _SPUEAR_ symbol
is defined in overlay section before creating a stub.
(build_spuear_stubs): Likewise.
(spu_elf_size_stubs, spu_elf_build_stubs): Adjust calls.

gas/

2008-04-07  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (parse_real_register): Return AVX register
only if AVX is enabled.

gas/testsuite/

2008-04-07  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/att-regs.s: Add AVX register test.
* gas/i386/intel-regs.s: Likewise.

* gas/i386/att-regs.d: Updated.
* gas/i386/intel-regs.d: Likewise.

* alphanbsd-tdep.c: Include "target.h".
* mn10300-tdep.c: Include "target.h".
* Makefile.in (alphanbsd-tdep.o, mn10300-tdep.o): Update.

correctly regenerate configure

oops - omitted from previous delta

PR gas/6043
* config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.

* gas/sh/sh64/eh-1.d: New.
* gas/sh/sh64/eh-1.d: Likewise.

*** empty log message ***

daily update

*** empty log message ***

New test for asynchronous Machine Interface (MI) responses.

* path.cc (struct opt): Rename "system" to "nouser".
* postinsatll: Ditto.

Fix breakpoint condition that use member variables.
        * valops.c (check_field): Remove.
        (check_field_in): Rename to check_field.
        (value_of_this): Use la_name_of_this.
        * value.h (check_field): Adjust prototype.

        * language.h (la_value_of_this): Rename to la_name_of_this.
        * language.c (unknown_language_defn): Specify "this" for
        name_of_this.
        (auto_language_defn): Likewise.
        (local_language_defn): Likewise.
        * ada-lang.c (ada_language_defn): Adjust comment.
        * c-lang.c (c_language_defn): Adjust comment.
        (cplus_language_defn): Specify "this" for name_of_this.
        (asm_language_defn): Adjust comment.
        (minimal_language_defn): Adjust comment.
        * f-lang.c (f_language_defn): Specify NULL for name_of_this.
        * jv-lang.c (java_language_defn): Specify "this" for name_of_this.
        * m2-lang.c (m2_language_defn): Specify "this" for name_of_this.
        * objc-lang.c (objc_language_defn): Specify "self" for
        name_of_this.
        * p-lang.c (pascal_language_defn): Specify "this" for
        name_of_this.
        * scm-lang.c (scm_language_defn): Specify NULL for name_of_this.

        * symtab.c (lookup_symbol_aux): Lookup "this" in the
        proper scope, and check for field in type of "this", without
        trying to create a value.

daily update

*** empty log message ***

* lib/mi-support.exp (mi_expect_stop): New.
(mi_run_cmd): Change the
token.  Use mi_send_resuming_command, use
mi_expect_stop.
(mi_execute_to_helper): Rename to mi_execute_to.
(mi_send_resuming_command): Add more error patterns.
(mi_wait_for_stop): Renamed to...
(mi_get_stop_line): ...this.
(mi_run_inline_test): Adjust.

* gdb.mi/mi-cli.exp: Use mi_execute_to/mi_expect_stop.
* gdb.mi/mi-console.exp: Likewise.
* gdb.mi/mi-pending.exp: Likewise.
* gdb.mi/mi-simplerun.exp: Likewise.
* gdb.mi/mi-stack.exp: Likewise.
* gdb.mi/mi-stepi.exp: Likewise.
* gdb.mi/mi-syn-frame.exp: Add comment.
* gdb.mi/mi-until.exp: Likewise.
* gdb.mi/mi-var-display.exp: Likewise.
* gdb.mi/mi-watch.exp: Likewise.
* gdb.mi/mi2-cli.exp: Likewise.
* gdb.mi/mi2-console.exp: Likewise.
* gdb.mi/mi2-simplerun.exp: Likewise.
* gdb.mi/mi2-stack.exp: Likewise.
* gdb.mi/mi2-stepi.exp: Likewise.
* gdb.mi/mi2-until.exp: Likewise.
* gdb.mi/mi2-var-display.exp: Likewise.
* gdb.mi/mi2-watch.exp: Likewise.

* postinstall: New script.
* Makefile.in (sysconfdir): Define.
(install): Create $(sysconfdir)/postinstall dir.  Install postinstall
script into it.

* path.cc: Add temorary comments to note later function removal.
(conv_fstab_spaces): New inline function to handle \040 to space
conversion.
(struct opt): Add "system" and "user" mount options.
(mount_info::from_fstab_line): Only allow # to start a comment at
the beginning of the line.  Call conv_fstab_spaces on native_path and
posix_path fields.  Don't enforce system mounts in /etc/fstab.
Drop last argument in call to add_item.
(mount_info::from_fstab): Create a default cygdrive entry.  Load
user mount points from fstab.<username> instead of fstab.<sid>.
(mount_info::read_mounts): Drop last argument in call to add_item.
(mount_info::add_reg_mount): Remove.
(mount_info::del_reg_mount): Remove.
(mount_info::write_cygdrive_info): Rename from
mount_info::write_cygdrive_info_to_registry.  Don't write to registry.
Disallow to overwrite a system cygdrive prefix.
(mount_info::remove_cygdrive_info_from_registry): Remove.
(mount_info::get_cygdrive_info): Just fetch current cygdrive prefix and
flags.
(mount_info::add_item): Drop last argument.  Don't write to registry.
Disallow to overwrite a system mount point.
(mount_info::del_item): Drop last argument.  Don't write to registry.
Disallow to remove a system mount point.
(mount): Enforce user mount.
(cygwin_umount): Ditto.
* shared_info.h (mount_info::add_item): Drop last argument.
(mount_info::del_item): Ditto.
(mount_info::add_reg_mount): Remove.
(mount_info::del_reg_mount): Remove.
(mount_info::write_cygdrive_info): Rename from
mount_info::write_cygdrive_info_to_registry.
(mount_info::remove_cygdrive_info_from_registry): Remove.

*** empty log message ***

2008-04-04  Adrian Bunk  <bunk@stusta.de>
    Bob Wilson  <bob.wilson@acm.org>

* config/tc-xtensa.c (xg_apply_fix_value): Check return code from
call to decode_reloc.

daily update

* gdb.base/watch_thread_num.exp: Use gdb_compile_pthreads.

* gdb.cp/mb-templates.exp: Skip test on spu*-*-* targets.

gdb/
2008-04-04  Pedro Alves  <pedro@codesourcery.com>

* mi/mi-cmds.h (enum mi_cmd_result): Delete MI_CMD_ERROR.
(mi_error_message): Delete declaration.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Call error instead of
returning MI_CMD_ERROR.
* mi/mi-main.c (mi_error_message): Delete.
(mi_cmd_exec_interrupt):
(mi_cmd_thread_select, mi_cmd_thread_list_ids)
(mi_cmd_thread_info): Call error instead of returning
MI_CMD_ERROR.
(mi_cmd_data_list_register_values): Call error instead of
returning MI_CMD_ERROR.  Adapt to new get_register interface.
(get_register): Change return typo to void.  Call error instead of
returning MI_CMD_ERROR.
(mi_cmd_data_write_register_values): Call error instead of
returning MI_CMD_ERROR.
(mi_cmd_list_features): Return MI_CMD_DONE.
(captured_mi_execute_command): Remove MI_CMD_ERROR handling.
(mi_execute_command): Always print exceptions with -error.

gdb/testsuite/
2008-04-04  Pedro Alves  <pedro@codesourcery.com>

* gdb.mi/mi-disassemble.exp, gdb.mi/mi-stack.exp,
gdb.mi/mi-syn-frame.exp, gdb.mi/mi-var-block.exp,
gdb.mi/mi-var-cmd.exp, gdb.mi/mi-var-display.exp,
gdb.mi/mi2-disassemble.exp, gdb.mi/mi2-stack.exp,
gdb.mi/mi2-syn-frame.exp, gdb.mi/mi2-var-block.exp,
gdb.mi/mi2-var-cmd.exp, gdb.mi/mi2-var-display.exp: Update to not
expect an mi error duplicated in stderr.

[newlib]
* libm/machine/spu/configure: Regenerate with autoconf 2.61.
* libc/sys/configure: Regenerate with autoconf 2.61.
* libc/machine/configure: Regenerate with autoconf 2.61.
[libgloss]
* hp74x/configure: Regenerate with autoconf 2.61.
* fr30/configure: Regenerate with autoconf 2.61.
* mips/configure: Regenerate with autoconf 2.61.
* xstormy16/configure: Regenerate with autoconf 2.61.
* rs6000/configure: Regenerate with autoconf 2.61.
* d30v/configure: Regenerate with autoconf 2.61.
* i386/configure: Regenerate with autoconf 2.61.
* configure: Regenerate with autoconf 2.61.
* wince/configure: Regenerate with autoconf 2.61.
* pa/configure: Regenerate with autoconf 2.61.
* m32r/configure: Regenerate with autoconf 2.61.
* mn10200/configure: Regenerate with autoconf 2.61.
* iq2000/configure: Regenerate with autoconf 2.61.
* cris/configure: Regenerate with autoconf 2.61.
* m68k/configure: Regenerate with autoconf 2.61.
* spu/configure: Regenerate with autoconf 2.61.
* m32c/configure: Regenerate with autoconf 2.61.
* mn10300/configure: Regenerate with autoconf 2.61.
* i960/configure: Regenerate with autoconf 2.61.
* arm/configure: Regenerate with autoconf 2.61.
* libnosys/configure: Regenerate with autoconf 2.61.
* m68hc11/configure: Regenerate with autoconf 2.61.
* bfin/configure: Regenerate with autoconf 2.61.
* crx/configure: Regenerate with autoconf 2.61.
* mt/configure: Regenerate with autoconf 2.61.
* sparc/configure: Regenerate with autoconf 2.61.
* sparc/libsys/configure: Regenerate with autoconf 2.61.
* mcore/configure: Regenerate with autoconf 2.61.
* mep/configure: Regenerate with autoconf 2.61.
* frv/configure: Regenerate with autoconf 2.61.
* doc/configure: Regenerate with autoconf 2.61.

* server.c (handle_query): Never return "unsupported" for
qXfer:features:read queries.

2008-04-04  Cary Coutant  <ccoutant@google.com>

* symtab.h (Symbol::is_weak_undefined): New function.
(Symbol::is_strong_undefined): New function.
(Symbol::is_absolute): New function.
(Symbol::needs_plt_entry): Exclude weak undefined symbols.
(Symbol::needs_dynamic_reloc): Exclude weak undefined and
absolute symbols.
* testsuite/Makefile.am (check_PROGRAMS): Add weak_undef_test.
(weak_undef_test): New target.
* testsuite/Makefile.in: Rebuild.
* testsuite/weak_undef_file1.cc: New file.
* testsuite/weak_undef_file2.cc: New file.
* testsuite/weak_undef_test.cc: New file.

gas/

2008-04-04  H.J. Lu  <hongjiu.lu@intel.com>

* NEWS: Mention XSAVE.  Change CLMUL to PCLMUL.

* config/tc-i386.c (cpu_arch): Add .pclmul.
(md_show_usage): Replace clmul with pclmul.
* doc/c-i386.texi: Likewise.

gas/testsuite/

2008-04-04  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/arch-10-1.l: Replace CLMUL with PCLMUL.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/arch-10.s: Likewise.
* gas/i386/clmul-intel.d: Likewise.
* gas/i386/clmul.d: Likewise.
* gas/i386/clmul.s: Likewise.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/x86-64-clmul-intel.d: Likewise.
* gas/i386/x86-64-clmul.d: Likewise.
* gas/i386/x86-64-clmul.s: Likewise.

* gas/i386/arch-10.d: Replace clmul with pclmul.
* gas/i386/x86-64-arch-2.d: Likewise.

opcodes/

2008-04-04  H.J. Lu  <hongjiu.lu@intel.com>

* i386-gen.c (cpu_flag_init): Replace CPU_CLMUL_FLAGS/CpuCLMUL
with CPU_PCLMUL_FLAGS/CpuPCLMUL.
(cpu_flags): Replace CpuCLMUL with CpuPCLMUL.
* i386-opc.tbl: Likewise.

* i386-opc.h (CpuCLMUL): Renamed to ...
(CpuPCLMUL): This.
(CpuFMA): Updated.
(i386_cpu_flags): Replace cpuclmul with cpupclmul.

* i386-init.h: Regenerated.

    * NEWS: Mention new commands set/show multiple-symbols.

    PR binutils/4334
        * acx.m4 (ACX_CHECK_CYGWIN_CAT_WORKS): New macro to check that
        cygwin builds are not running in textmode.

        * configure.ac: Run ACX_CHECK_CYGWIN_CAT_WORKS for cygwin hosted
        builds.
        * configure: Regenerate.

PR other/35151
        * configure.ac: Combine rules for mingw32 and mingw64.
        * configure: Regenerate.

PR other/35151
       * configure.ac: Combine rules for mingw32 and mingw64.
       * configure: Regenerate.

* po/sk.po: Updated Slovak translation.

*** empty log message ***

* elfcpp_swap.h (Swap_unaligned<64, true>::writeval): Correct
byte order.

daily update

    * gdb.texinfo (Breakpoint Menus): Delete. Contents moved inside
        new node "Ambiguous Expressions".  Replace references to this
        node by references to "Ambiguous Expressions" throughout.
        (Ambiguous Expressions): New node.

    * gdb.cp/ovldbreak.cc: Add missing bodies for methods foo::foofunc.
        * gdb.cp/ovldbreak.exp: Set multiple-symbols to "ask".
        Add a couple of tests that verify the behavior when the new setting
        is set to "cancel" and "all".
        * gdb.cp/method2.exp, gdb.cp/templates.exp: Set multiple-symbols to
        "ask" before we start the testing.

    * symtab.c (multiple_symbols_ask, multiple_symbols_all)
        (multiple_symbols_cancel): New constants.
        (multiple_symbols_modes, multiple_symbols_mode): New static globals.
        (multiple_symbols_select_mode): New function.
        (_initialize_symtab): Add new set/show multiple-symbols commands.
        * symtab.h (multiple_symbols_ask, multiple_symbols_all)
        (multiple_symbols_cancel, multiple_symbols_select_mode): Declare.
        * ada-lang.c (user_select_syms): Add handling of new multiple-symbols
        setting.
        * linespec.c (decode_line_2): Likewise.

Fix ChangeLog entry.

* path.cc (mount_info::from_fstab_line): Simplify.
(mount_info::from_fstab): Create a default root dir.

* symtab.h (enum free_code): Delete free_contents, unused.
* symmisc.c (free_symtab_block): Delete.
(free_symtab, case free_code): Delete.

* dcrt0.cc (insert_file): Fix potential buffer overflow.

* path.cc (mount_info::from_fstab): Get module path name of the Cygwin
DLL, not the path of the application.

Cleanup.
* exceptions.cc (windows_system_directory): Make static.  Convert to
WCHAR.
(_cygtls::inside_kernel): Accommodate above change.  Check module
path name for leading \\?\ and skip, if so.
(try_to_debug): Call GetEnvironmentStringsW and convert evaluation to
WCHAR to avoid truncated environment problem.
(has_visible_window_station): Call GetUserObjectInformationW.
(events_init): Accommodate above conversion of windows_system_directory.
* init.cc (respawn_wow64_process): Use WCHAR functions to start new
process.
* net.cc (__dup_ent): Drop Windows 9x consideration.
(load_ipv6_funcs): Use WCHAR functions to load IPv6 libs.
* syscalls.cc (syscalls.cc): Remove call to GetDiskFreeSpace.

Kai Tietz  <kai.tietz@onevision.com>

PR ld/6026
* pe-dll.c (make_head): Fix iat and thunk addend offset.

* compressed_output.h (class Output_compressed_section): Use
unsigned buffer.
* compressed_output.cc (zlib_compress): Use unsigned buffers,
add zlib header.
(zlib_compressed_suffix): Removed.
(Output_compressed_section::set_final_data_size): Use unsigned
buffers.
* testsuite/Makefile.am (flagstest_compress_debug_sections):
Fix linker invocation.
(flagstest_o_specialfile_and_compress_debug_sections):
Likewise.
* testsuite/Makefile.in: Regenerated.

binutils/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

* dwarf.c (dwarf_regnames_i386): Add AVX registers.
(dwarf_regnames_x86_64): Likewise.

gas/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

* NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.

* doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
Document -msse2avx, .avx, .aes, .clmul and .fma.

* config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
(vex_prefix): Likewise.
(sse2avx): Likewise.
(CPU_FLAGS_ARCH_MATCH): Likewise.
(CPU_FLAGS_64BIT_MATCH): Likewise.
(CPU_FLAGS_32BIT_MATCH): Likewise.
(CPU_FLAGS_PERFECT_MATCH): Likewise.
(regymm): Likewise.
(vex_imm4): Likewise.
(fits_in_imm4): Likewise.
(build_vex_prefix): Likewise.
(VEX_check_operands): Likewise.
(bad_implicit_operand): Likewise.
(OPTION_MSSE2AVX): Likewise.
(T_YMMWORD): Likewise.
(_i386_insn): Add vex.
(cpu_arch): Add .avx, .aes, .clmul and .fma.
(cpu_flags_match): Changed to take a pointer to const template.
Enable encoding SSE instructions with VEX prefix for -msse2avx.
(match_mem_size): Also check ymmword.
(operand_type_match): Clear ymmword.
(md_begin): Allow '_' in mnemonic.
(type_names): Add OPERAND_TYPE_VEX_IMM4.
(process_immext): Update assert.
(md_assemble): Don't call process_immext if sse2avx and immext
are true.  Call build_vex_prefix if vex is true.
(parse_insn): Updated for cpu_flags_match.
(swap_operands): Handle 5 operands.
(match_template): Handle 5 operands. Updated for cpu_flags_match.
Check regymm.  Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
(process_suffix): Handle YMMWORD_MNEM_SUFFIX.
(check_byte_reg): Check regymm.
(process_operands): Duplicate the destination register for
-msse2avx if needed.
(build_modrm_byte): Updated for instructions with VEX encoding.
(output_insn): Output VEX prefix if needed.
(md_longopts): Add msse2avx.
(md_parse_option): Handle OPTION_MSSE2AVX.
(md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
(intel_e09): Support YMMWORD.
(intel_e11): Likewise.
(intel_get_token): Likewise.

gas/testsuite/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run aes, aes-intel, x86-64-aes,
x86-64-aes-intel, avx, avx-intel, inval-avx, x86-64-avx,
x86-64-avx-intel and x86-64-inval-avx.

* gas/cfi/cfi-i386.s: Add tests for AVX register maps.
* gas/cfi/cfi-x86_64.s: Likewise.

* gas/i386/aes.d: New.
* gas/i386/aes.s: Likewise.
* gas/i386/aes-intel.d: Likewise.
* gas/i386/avx.d: Likewise.
* gas/i386/avx.s: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/clmul.d: Likewise.
* gas/i386/clmul-intel.d: Likewise.
* gas/i386/clmul.s: Likewise.
* gas/i386/i386.exp: Likewise.
* gas/i386/inval-avx.l: Likewise.
* gas/i386/inval-avx.s: Likewise.
* gas/i386/sse2avx.d: Likewise.
* gas/i386/sse2avx.s: Likewise.
* gas/i386/x86-64-aes.d: Likewise.
* gas/i386/x86-64-aes.s: Likewise.
* gas/i386/x86-64-aes-intel.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx.s: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
* gas/i386/x86-64-clmul.d: Likewise.
* gas/i386/x86-64-clmul-intel.d: Likewise.
* gas/i386/x86-64-clmul.s: Likewise.
* gas/i386/x86-64-inval-avx.l: Likewise.
* gas/i386/x86-64-inval-avx.s: Likewise.
* gas/i386/x86-64-sse2avx.d: Likewise.
* gas/i386/x86-64-sse2avx.s: Likewise.

* gas/i386/arch-10.s: Add tests for AVX, AES, CLMUL and FMA.
* gas/i386/x86-64-arch-2.s: Likewise.

* gas/i386/rexw.s: Add AVX tests.

* gas/i386/x86-64-opcode-inval.s: Remove lds/les test.

* gas/cfi/cfi-i386.d: Updated.
* gas/cfi/cfi-x86_64.d: Likewise.
* gas/i386/arch-10.d:  Likewise.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/rexw.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.

include/opcode/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

* i386.h (MAX_OPERANDS): Set to 5.
(MAX_MNEM_SIZE): Changed to 20.

opcodes/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (OP_E_register): New.
(OP_E_memory): Likewise.
(OP_VEX): Likewise.
(OP_EX_Vex): Likewise.
(OP_EX_VexW): Likewise.
(OP_XMM_Vex): Likewise.
(OP_XMM_VexW): Likewise.
(OP_REG_VexI4): Likewise.
(PCLMUL_Fixup): Likewise.
(VEXI4_Fixup): Likewise.
(VZERO_Fixup): Likewise.
(VCMP_Fixup): Likewise.
(VPERMIL2_Fixup): Likewise.
(rex_original): Likewise.
(rex_ignored): Likewise.
(Mxmm): Likewise.
(XMM): Likewise.
(EXxmm): Likewise.
(EXxmmq): Likewise.
(EXymmq): Likewise.
(Vex): Likewise.
(Vex128): Likewise.
(Vex256): Likewise.
(VexI4): Likewise.
(EXdVex): Likewise.
(EXqVex): Likewise.
(EXVexW): Likewise.
(EXdVexW): Likewise.
(EXqVexW): Likewise.
(XMVex): Likewise.
(XMVexW): Likewise.
(XMVexI4): Likewise.
(PCLMUL): Likewise.
(VZERO): Likewise.
(VCMP): Likewise.
(VPERMIL2): Likewise.
(xmm_mode): Likewise.
(xmmq_mode): Likewise.
(ymmq_mode): Likewise.
(vex_mode): Likewise.
(vex128_mode): Likewise.
(vex256_mode): Likewise.
(USE_VEX_C4_TABLE): Likewise.
(USE_VEX_C5_TABLE): Likewise.
(USE_VEX_LEN_TABLE): Likewise.
(VEX_C4_TABLE): Likewise.
(VEX_C5_TABLE): Likewise.
(VEX_LEN_TABLE): Likewise.
(REG_VEX_XX): Likewise.
(MOD_VEX_XXX): Likewise.
(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
(PREFIX_0F3A44): Likewise.
(PREFIX_0F3ADF): Likewise.
(PREFIX_VEX_XXX): Likewise.
(VEX_OF): Likewise.
(VEX_OF38): Likewise.
(VEX_OF3A): Likewise.
(VEX_LEN_XXX): Likewise.
(vex): Likewise.
(need_vex): Likewise.
(need_vex_reg): Likewise.
(vex_i4_done): Likewise.
(vex_table): Likewise.
(vex_len_table): Likewise.
(OP_REG_VexI4): Likewise.
(vex_cmp_op): Likewise.
(pclmul_op): Likewise.
(vpermil2_op): Likewise.
(m_mode): Updated.
(es_reg): Likewise.
(PREFIX_0F38F0): Likewise.
(PREFIX_0F3A60): Likewise.
(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
and PREFIX_VEX_XXX entries.
(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
PREFIX_0F3ADF.
(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
Add MOD_VEX_XXX entries.
(ckprefix): Initialize rex_original and rex_ignored.  Store the
REX byte in rex_original.
(get_valid_dis386): Handle the implicit prefix in VEX prefix
bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
calling get_valid_dis386.  Use rex_original and rex_ignored when
printing out REX.
(putop): Handle "XY".
(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
ymmq_mode.
(OP_E_extended): Updated to use OP_E_register and
OP_E_memory.
(OP_XMM): Handle VEX.
(OP_EX): Likewise.
(XMM_Fixup): Likewise.
(CMP_Fixup): Use ARRAY_SIZE.

* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
CPU_FMA_FLAGS and CPU_AVX_FLAGS.
(operand_type_init): Add OPERAND_TYPE_REGYMM and
OPERAND_TYPE_VEX_IMM4.
(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
VexImmExt and SSE2AVX.
(operand_types): Add RegYMM, Ymmword and Vex_Imm4.

* i386-opc.h (CpuAVX): New.
(CpuAES): Likewise.
(CpuCLMUL): Likewise.
(CpuFMA): Likewise.
(Vex): Likewise.
(Vex256): Likewise.
(VexNDS): Likewise.
(VexNDD): Likewise.
(VexW0): Likewise.
(VexW1): Likewise.
(Vex0F): Likewise.
(Vex0F38): Likewise.
(Vex0F3A): Likewise.
(Vex3Sources): Likewise.
(VexImmExt): Likewise.
(SSE2AVX): Likewise.
(RegYMM): Likewise.
(Ymmword): Likewise.
(Vex_Imm4): Likewise.
(Implicit1stXmm0): Likewise.
(CpuXsave): Updated.
(CpuLM): Likewise.
(ByteOkIntel): Likewise.
(OldGcc): Likewise.
(Control): Likewise.
(Unspecified): Likewise.
(OTMax): Likewise.
(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
vex3sources, veximmext and sse2avx.
(i386_operand_type): Add regymm, ymmword and vex_imm4.

* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.

* i386-reg.tbl: Add AVX registers, ymm0..ymm15.

* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.

*  dwarf_reader.cc (Sized_dwarf_line_info::read_header_prolog,
Sized_dwarf_line_info::process_one_opcode): Use Swap_unaligned.

* TODO: New file.

*** empty log message ***

daily update

* fileread.cc (File_read::find_view): Add byteshift and vshifted
parameters.  Update for new key type to views_.  Change all
callers.
(File_read::read): Adjust for byteshift in returned view.
(File_read::add_view): New function, broken out of
find_and_make_view.
(File_read::make_view): New function, broken out of
find_and_make_view.
(File_read::find_or_make_view): Add offset and aligned
parameters.  Rewrite accordingly.  Change all callers.
(File_read::get_view): Add offset and aligned parameters.  Adjust
for byteshift in return value.
(File_read::get_lasting_view): Likewise.
* fileread.h (class File_read): Update declarations.
(class File_read::View): Add byteshift_ field.  Add byteshift to
constructor.  Add byteshift method.
* archive.h (Archive::clear_uncached_views): New function.
(Archive::get_view): Add aligned parameter.  Change all callers.
* object.h (Object::get_view): Add aligned parameter.  Change all
callers.
(Object::get_lasting_view): Likewise.

* fileread.cc (File_read::release): Don't call clear_views if
there are multiple objects.
* fileread.h (File_read::clear_uncached_views): New function.
* archive.cc (Add_archive_symbols::run): Call clear_uncached_views
on the archive.

* path.cc (mount_info::init): First try to fetch mount points from
fstab files.  Fallback to registry if none exists.
(skip_ws): New inline function.
(find_ws): Ditto.
(struct opt): New structure for mount options.
(read_flags): New static function to convert a mount flags string into
a flag value.
(mount_info::from_fstab_line): New method to create a mount table
entry from a fstab line.
(mount_info::from_fstab): New method to read fstab file.
* shared_info.h (mount_info::from_fstab_line): Declare.
(mount_info::from_fstab): Declare.

* path.cc (enum symlink_t): Rename from shortcut_t.

* path.cc (symlink_info::check_reparse_point): Use NtFsControlFile
to read reparse points.
(enum shortcut_t): New type.
(symlink_info::check): Convert sym_check to shortcut_t.  Use shortcut_t
enum values throughout.  Check reparse point before checking for
sysfile shortcut.  Open reparse points with READ_CONTROL only to
accommodate special Vista reparse points.  Add comments.

* flock.cc (get_lock_parent_dir): Drop call to NtOpenDirectoryObject
and utilize OBJ_OPENIF flag in call to NtCreateDirectoryObject.
(inode_t::inode_t): Ditto.  Same for NtOpenMutant/NtCreateMutant.

* posix.sgml: Change lockf to being implemented.

* dcrt0.cc (insert_file): Convert filename to WCHAR and call
CreateFileW to allow UTF-8 filenames.

*** empty log message ***

* elf32-spu.c (insert_callee): Reorder call list so most recent
call is always first.
(interesting_section): Move.
(mark_functions_via_relocs): Fold interesting_section and
reloc_count tests in callers to here.  Simplify output section
owner test.
(discover_functions): Set "gaps" when no symbols and some
"interesting_section".  Run pasted_function loop for no symbol
bfds.
(for_each_node, transfer_calls): New functions.
(mark_non_root): Adjust to suit for_each_node.
(call_graph_traverse): Likewise.  Fix memory leak.  Rename to..
(remove_cycles): ..this.
(build_call_tree): Use for_each_node and transfer_calls.
(struct _sum_stack_param): New.
(sum_stack): Adjust to suit for_each_node.  Return error on
malloc failure.  Move code to print root node cumulative stack from..
(spu_elf_stack_analysis): ..here.  Use for_each_node.

daily update

2008-03-31  Cary Coutant  <ccoutant@google.com>

Add thin archive support.
* archive.cc (Archive::armagt): New const.
(Archive::setup): Remove task parameter and calls to unlock.
(Archive::unlock_nested_archives): New function.
(Archive::read_header): Add nested_off parameter. Change
all callers.
(Archive::interpret_header): Likewise.
(Archive::include_all_members): Change to handle thin
archives.
(Archive::include_member): Likewise.
* archive.h (Archive::Archive): Add new parameters and
initializers.
(Archive::armagt): New const.
(Archive::setup): Remove task parameter.
(Archive::unlock_nested_archives): New function.
(Archive::read_header): Add nested_off parameter.
(Archive::interpret_header): Likewise.
(Archive::Nested_archive_table): New typedef.
(Archive::is_thin_archive_): New field.
(Archive::nested_archives_): New field.
(Archive::options_): New field.
(Archive::dirpath_): New field.
(Archive::task_): New field.
* readsyms.cc (Read_symbols::do_read_symbols): Add check
for thin archives.  Pass additional parameters to
Archive::Archive.  Unlock the archive file after calling
Archive::setup.

2008-04-01 Patrick Mansfield <patmans@us.ibm.com>

        * libc/machine/spu/memcmp.c: New file for SPU optimized memcmp.
        * libc/machine/spu/strncmp.h: New file supply _strncmp_internal.
        * libc/machine/spu/Makefile.am: Add memcmp.c.
        * libc/machine/spu/Makefile.in: Rebuild.
        * libc/machine/spu/strncmp.c: Use _strncmp_internal.

2008-04-01 Patrick Mansfield <patmans@us.ibm.com>

        * configure.host: Build SPU with -DREENTRANT_SYSCALLS_PROVIDED and
          -DMISSING_SYSCALL_NAMES.

2008-03-27 Patrick Mansfield <patmans@us.ibm.com>

* libc/machine/spu/Makefile.am: Add assert.c.
* libc/machine/spu/Makefile.in: Regenerate.
* libc/machine/spu/assert.c: New file.

* gdb.cp/casts.cc: Add class reference variables.
* gdb.cp/casts.exp: New test cases for up/down casting references.

* gdb.cp/casts.cc: Add class reference variables.
* gdb.cp/casts.exp: New test cases for up/down casting references.

* valops.c (value_cast_structs): New function. Cast related
STRUCT types up/down and return cast value. The body of this
function comes mostly from value_cast_pointers.
(value_cast_pointers): Code for actual cast STRUCT-STRUCT moved
to value_cast_structs. Now value_cast_pointers needs only create
appropriate reference after using value_cast_structs for actual
casting.
(value_cast): Handle references.

2008-04-01  Marc Khouzam  <marc.khouzam@ericsson.com>

* gdb.mi/mi-var-display.exp: Stop at end of do_special_tests
instead of beginning to make an extra test pass.
* gdb.mi/mi2-var-display.exp: Likewise.

2008-04-01  Marc Khouzam  <marc.khouzam@ericsson.com>

* MAINTAINERS: Added myself to section Write After Approval.

* Fix copyright dates.

Throughout, call fcntl64 instead of fcntl or fcntl_worker.
* fcntl.cc (fcntl_worker): Remove.
(fcntl64): Add fault handler.  Move fcntl_worker stuff here.  Add case
for locking and call fhandler's lock method directly.  Make sure that
F_FLOCK flag isn't set in lock call.
(_fcntl): Add fault handler.
* fhandler.cc (fhandler_base::fcntl): Drop lock cases.
* flock.cc (flock): Add fault handler.  Simplify code.  Call fhandlers
lock method directly instead of fcntl_worker.  Add debug output.
(lockf): Add fault handler.  Call fhandlers lock method directly
instead of fcntl_worker.  Add debug output.
* winsup.h (fcntl_worker): Drop declaration.
(fcntl64): Declare.

*** empty log message ***

PR 6006
* archive.c (_bfd_slurp_extended_name_table): Change
ARFMAG[0] to ARFMAG[1].
(_bfd_construct_extended_name_table): Likewise.

daily update

merge from gcc

* smallprint.cc (__small_vswprintf): Fix uninitialized usage of `w'.

Revamp advisory file locking to avoid cross reference pointers as well
as to allow BSD flock semantics.  More agressively delete unused nodes
and sync objects.
* fhandler.h (fhandler_base::ino): Rename from namehash.  Fix comment.
(fhandler_base::node): Remove.
(fhandler_base::unique_id): Add.
(fhandler_base::del_my_locks): New method.
(get_ino): Rename from get_namehash.  Change usage throughout Cygwin.
(get_unique_id): New method.
* fhandler.cc (fhandler_base::close): Call own del_my_locks method.
Fix comment.
(fhandler_base::fhandler_base): Accommodate new and changed members.
(fhandler_base::fixup_after_fork): Call del_my_locks.
(fhandler_base::fixup_after_exec): Ditto for files with close-on-exec
flag set.
* fhandler_disk_file.cc (get_ino_by_handle): Rename from
readdir_get_ino_by_handle.  Accommodate throughout.
(fhandler_base::open_fs): Fill ino with inode number if FS has good
inodes.  Allocate a LUID and store in unique_id to recognize file
descriptors referencing the same file object.
* flock.cc: Drop flock TODO comments.  Use explicit types __dev32_t
and __ino64_t instead of dev_t and ino_t.
(LOCK_OBJ_NAME_LEN): Change to reflect longer lf_id length.
(get_obj_handle_count): New method.
(lockf_t::lf_id): Change type to long long.
(inode_t::get_lock_obj_handle_count): Drop in favor of static function
get_obj_handle_count.
(inode_t::del_locks): Remove.
(inode_t::get): Add create_if_missing flag argument.
(inode_t::del_my_locks): Reimplement to handle POSIX and BSD flock
locks.  Return if node can be deleted or not.
(inode_t::~inode_t): Ditto.  Close handles to i_dir and i_mtx.
(fixup_lockf_after_fork): Remove.
(fhandler_base::del_my_locks): New method.
(fixup_lockf_after_exec): Check if node can be deleted.
(inode_t::get): Only create node if create_if_missing is set.  Lock
the returned node here before unlocking the node list.
(inode_t::get_all_locks_list): Accommodate new lf_id length.
(inode_t::create_lock_obj): Ditto.
(lockf_t::open_lock_obj): Ditto.  Change return type to bool.  De-const.
Set lf_obj instead of returning a handle.
(lockf_t::del_lock_obj): Call SetEvent only if new incoming parameters
allow it.  Explain how it's supposed to work.
(fhandler_disk_file::lock): Only fetch file length in SEEK_END case.
Use NtQueryInformationFile(FileStandardInformation) instead of
calling fstat_by_handle.  Always unlock node before returning.
Use fhandler's unique id to create lf_id for BSD flock locks.
Rely on node lock from inode_t::get.  Call del_lock_obj on removed
locks here to allow explicit unlocking.  Delete node if no lock exists
on the file anymore.
(lf_setlock): Get file handle as additional parameter.  Handle the fact
that lf_getblock now always opens the attached event object.  Reactivate
erroneously applied patch which deactivates setting thread priority.
Additionally handle blocking on BSD flock locks.
(lf_clearlock): Get file handle as additional parameter.
(lf_getlock): Close event handle opened by lf_getblock.
(lf_getblock): Open potentially blocking event object here and check
its signal state if it's a BSD flock lock.
(lf_wakelock): Get file handle as additional parameter.
* fork.cc (frok::child): Drop call to fixup_lockf_after_fork.
* ntdll.h (struct _EVENT_BASIC_INFORMATION): Define.
(enum _EVENT_INFORMATION_CLASS): Define.
(NtQueryEvent): Declare.

* fhandler.h (fhandler_base::fs_flags): Remove.
(fhandler_base::set_fs_flags): Remove.
(fhandler_base::get_fs_flags): Remove.
* fhandler.cc (fhandler_base::write): Check for sparse file using
pc.fs_flags().
* fhandler_disk_file.cc (fhandler_disk_file::ftruncate): Ditto.

The return of the volume serial number in fs_info.
* fhandler.h (get_dev): New method.
* fhandler_disk_file.cc (fhandler_base::fstat_by_handle): Drop call to
NtQueryVolumeInformationFile(FileFsVolumeInformation).  Just use
get_dev() method.
* fhandler_fifo.cc (fhandler_fifo::open) Use device ID and inode number
to generate fifo name.
* path.h (fs_info::sernum): New member.
(fs_info::serial_number): New method.
(path_conv::fs_serial_number): New method.
* path.cc (fs_info::update): Fetch volume serial number and store in
sernum.

* elfxx-mips.c (mips_elf_record_got_page_entry): Update comment.
(_bfd_mips_elf_check_relocs): Update comments.  Always call
mips_elf_record_got_page_entry for R_MIPS_GOT_PAGE.

* gdb.base/break.exp: Mark failures as such.  Fix formatting.

Updated French translations.

2008-03-31  Markus Deuling  <deuling@de.ibm.com>
    Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

* gdb.arch/spu-info.exp (info spu mailbox): Check for correct initial
value.  Add xfail for older kernels.

* ia64-tdep.c (examine_prologue): Correct array access.

*** empty log message ***

daily update

*** empty log message ***

daily update

* symtab.cc (Symbol_table::do_define_as_constant): Don't force a
version symbol to be local.
* testsuite/ver_test_4.sh: New file.
* testsuite/Makefile.am (check_SCRIPTS): Add ver_test_4.sh.
(check_DATA): Add ver_test_4.syms.
(ver_test_4.syms): New target.
* testsuite/Makefile.in: Rebuild.

* output.cc
(Output_section::Input_section_sort_entry::has_priority): New
function.
(Output_section::Input_section_sort_entry::match_file_name): New
function.
(Output_section::Input_section_sort_entry::match_section_name):
Remove.
(Output_section::Input_section_sort_entry::match_section_name_prefix):
Remove.
(Output_section::Input_section_sort_entry::match_section_file):
Remove.
(Output_section::Input_section_sort_compare::operator()): Rewrite
using new Input_section_sort_entry functions.  Sort crtbegin and
crtend first.  Sort sections with no priority before sections with
a priority.
* testsuite/initpri1.c (d3): Check j != 4.
(cd5): New constructor/destructor function.
(main): Check j != 2.

* symtab.cc (Symbol_table::add_from_object): If we don't use the
new symbol when resolving, don't call set_is_default.
* testsuite/ver_test_7.cc: New file.
* testsuite/ver_test_7.sh: New file.
* testsuite/Makefile.am (ver_test_7.so): New target.
(ver_test_7.o): New target.
(check_SCRIPTS): Add ver_test_7.sh.
(check_DATA): Add ver_test_7.syms.
(ver_test_7.syms): New target.

*** empty log message ***

daily update

* layout.cc (Layout::layout): If we see an input section with a
name that needs sorting, set the must_sort flag for the output
section.
(Layout::make_output_section): If the name of the output section
indicates that it might require sorting, set the may_sort flag.
* output.h (Output_section::may_sort_attached_input_sections): New
function.
(Output_section::set_may_sort_attached_input_sections): New
function.
(Output_section::must_sort_attached_input_sections): New
function.
(Output_section::set_must_sort_attached_input_sections): New
function.
(class Output_section): Declare Input_section_sort_entry.  Define
Input_section_sort_compare.  Declare
sort_attached_input_sections.  Add new fields:
may_sort_attached_input_sections_,
must_sort_attached_input_sections_,
attached_input_sections_are_sorted_.
* output.cc (Output_section::Output_section): Initialize new
fields.
(Output_section::add_input_section): Add an entry to
input_sections_ if may_sort or must_sort are true.
(Output_section::set_final_data_size): Call
sort_attached_input_sections if necessary.
(Output_section::Input_section_sort_entry): Define new class.
(Output_section::Input_section_sort_compare::operator()): New
function.
(Output_section::sort_attached_input_sections): New function.
* configure.ac: Check whether the compiler supports constructor
priorities.  Define a CONSTRUCTOR_PRIORITY automake conditional.
* testsuite/initpri1.c: New file.
* testsuite/Makefile.am (check_PROGRAMS): Add initpri1 if
CONSTRUCTOR_PRIORITY.
(initpri1_SOURCES, initpri1_DEPENDENCIES): New variables.
(initpri1_LDFLAGS): New variable.
* configure, Makefile.in, testsuite/Makefile.in: Rebuild.

/gas:
2008-03-28  Eric B. Weddington  <eric.weddington@atmel.com>

* config/tc-avr.c (mcu_types): Add attiny167.
* doc/c-avr.texi: Likewise.

/include:
2008-03-28  Eric B. Weddington  <eric.weddington@atmel.com>

* opcode/avr.h (AVR_ISA_TINY3): Define new opcode set for attiny167.

/gas:
2008-03-28  Eric B. Weddington  <eric.weddington@atmel.com>

* config/tc-avr.c (mcu_types): Add atmega32u4.
* doc/c-avr.texi: Likewise.