OSDN Git Service
Liu Bo [Thu, 13 Sep 2018 17:46:08 +0000 (01:46 +0800)]
Btrfs: assert page dirty bit on extent buffer pages
Just in case that someone breaks the rule that pages are dirty as long
as eb is dirty. The next patch will dirty the pages conditionally.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 11 Sep 2018 22:06:23 +0000 (06:06 +0800)]
Btrfs: remove unnecessary level check in balance_level
In the callchain:
btrfs_search_slot()
if (level != 0)
setup_nodes_for_search()
balance_level()
It is just impossible to have level=0 in balance_level, we can drop the
check.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 11 Sep 2018 22:06:26 +0000 (06:06 +0800)]
Btrfs: unify error handling of btrfs_lookup_dir_item
Unify the error handling of directory item lookups using IS_ERR_OR_NULL.
No functional changes.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Fri, 7 Sep 2018 20:41:40 +0000 (04:41 +0800)]
Btrfs: use args in the correct order for kcalloc in btrfsic_read_block
kcalloc is defined as:
kcalloc(size_t n, size_t size, gfp_t flags)
Although this won't cause problems in practice, btrfsic_read_block()
uses kcalloc with n and size in the opposite order.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Sep 2018 09:46:14 +0000 (12:46 +0300)]
btrfs: Make btrfs_find_device_by_devspec return btrfs_device directly
Instead of returning an error value and using one of the parameters for
returning the actual object we are interested in just refactor the
function to directly return btrfs_device *. Also bubble up the error
handling for the special BTRFS_ERROR_DEV_MISSING_NOT_FOUND value into
btrfs_rm_device. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Sep 2018 09:46:13 +0000 (12:46 +0300)]
btrfs: Make btrfs_find_device_missing_or_by_path return directly a device
This function returns a numeric error value and additionally the
device found in one of its input parameters. Simplify this by making
the function directly return a pointer to btrfs_device. Additionally
adjust the caller to handle the case when we want to remove the
'missing' device and ENOENT is returned to return the expected
positive error value, parsed by progs. Finally, unexport the function
since it's not called outside of volume.c. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 3 Sep 2018 09:46:12 +0000 (12:46 +0300)]
btrfs: Make btrfs_find_device_by_path return struct btrfs_device
Currently this function returns an error code as well as uses one of
its arguments as a return value for struct btrfs_device. Change the
function so that it returns btrfs_device directly and use the usual
"encode error in pointer" mechanics if something goes wrong. No
functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Thu, 6 Sep 2018 20:59:33 +0000 (16:59 -0400)]
btrfs: fix error handling in free_log_tree
When we hit an I/O error in free_log_tree->walk_log_tree during file system
shutdown we can crash due to there not being a valid transaction handle.
Use btrfs_handle_fs_error when there's no transaction handle to use.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000060
IP: free_log_tree+0xd2/0x140 [btrfs]
PGD 0 P4D 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
Modules linked in: <modules>
CPU: 2 PID: 23544 Comm: umount Tainted: G W 4.12.14-kvmsmall #9 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
task:
ffff96bfd3478880 task.stack:
ffffa7cf40d78000
RIP: 0010:free_log_tree+0xd2/0x140 [btrfs]
RSP: 0018:
ffffa7cf40d7bd10 EFLAGS:
00010282
RAX:
00000000fffffffb RBX:
00000000fffffffb RCX:
0000000000000002
RDX:
0000000000000000 RSI:
ffff96c02f07d4c8 RDI:
0000000000000282
RBP:
ffff96c013cf1000 R08:
ffff96c02f07d4c8 R09:
ffff96c02f07d4d0
R10:
0000000000000000 R11:
0000000000000002 R12:
0000000000000000
R13:
ffff96c005e800c0 R14:
ffffa7cf40d7bdb8 R15:
0000000000000000
FS:
00007f17856bcfc0(0000) GS:
ffff96c03f600000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000060 CR3:
0000000045ed6002 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
? wait_for_writer+0xb0/0xb0 [btrfs]
btrfs_free_log+0x17/0x30 [btrfs]
btrfs_drop_and_free_fs_root+0x9a/0xe0 [btrfs]
btrfs_free_fs_roots+0xc0/0x130 [btrfs]
? wait_for_completion+0xf2/0x100
close_ctree+0xea/0x2e0 [btrfs]
? kthread_stop+0x161/0x260
generic_shutdown_super+0x6c/0x120
kill_anon_super+0xe/0x20
btrfs_kill_super+0x13/0x100 [btrfs]
deactivate_locked_super+0x3f/0x70
cleanup_mnt+0x3b/0x70
task_work_run+0x78/0x90
exit_to_usermode_loop+0x77/0xa6
do_syscall_64+0x1c5/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f1784f90827
RSP: 002b:
00007ffdeeb03118 EFLAGS:
00000246 ORIG_RAX:
00000000000000a6
RAX:
0000000000000000 RBX:
0000556a60c62970 RCX:
00007f1784f90827
RDX:
0000000000000001 RSI:
0000000000000000 RDI:
0000556a60c62b50
RBP:
0000000000000000 R08:
0000000000000005 R09:
00000000ffffffff
R10:
0000556a60c63900 R11:
0000000000000246 R12:
0000556a60c62b50
R13:
00007f17854a81c4 R14:
0000000000000000 R15:
0000000000000000
RIP: free_log_tree+0xd2/0x140 [btrfs] RSP:
ffffa7cf40d7bd10
CR2:
0000000000000060
Fixes:
681ae50917df9 ("Btrfs: cleanup reserved space when freeing tree log on error")
CC: <stable@vger.kernel.org> # v3.13
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Misono Tomohiro [Thu, 30 Aug 2018 01:59:16 +0000 (10:59 +0900)]
btrfs: remove redundant variable from btrfs_cross_ref_exist
Since commit
d7df2c796d7e ("Btrfs attach delayed ref updates to delayed
ref heads"), check_delayed_ref() won't return -ENOENT.
In btrfs_cross_ref_exist(), two variables 'ret' and 'ret2' are
originally used to handle -ENOENT error case. Since the code is not
needed anymore, let's just remove 'ret2'.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Sat, 25 Aug 2018 05:47:09 +0000 (13:47 +0800)]
Btrfs: set leave_spinning in btrfs_get_extent
Unless it's going to read inline extents from btree leaf to page,
btrfs_get_extent won't sleep during the period of holding path lock.
This sets leave_spinning at first and sets path to blocking mode right
before reading inline extent if that's the case. The benefit is that a
path in spinning mode typically has lower impact (faster) on waiters
rather than that in the blocking mode.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Sat, 25 Aug 2018 05:47:59 +0000 (13:47 +0800)]
Btrfs: fix alignment in declaration and prototype of btrfs_get_extent
This fixes btrfs_get_extent to be consistent with our existing
declaration style.
Note: For the record, indentation styles that are accepted are both,
aligning under the opening ( and tab or double tab indentation on the
next line. Preferrably not spliting the type or long expressions in the
argument lists.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Colin Ian King [Tue, 28 Aug 2018 13:21:01 +0000 (14:21 +0100)]
btrfs: remove unused pointer 'tree' in btrfs_submit_compressed_read
Pointer 'tree' is being assigned but is never used hence it is redundant
and can be removed. This is a leftover from cleanup patch
00032d38eaa89c76de7 ("btrfs: drop extent_io_ops::merge_bio_hook
callback").
Cleans up clang warning:
warning: variable 'tree' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Colin Ian King [Tue, 28 Aug 2018 10:45:21 +0000 (11:45 +0100)]
btrfs: remove unused pointer inode in relink_file_extents
Pointer inode is being assigned but is never used hence it is redundant
and can be removed. It's been unused since the introduction in
38c227d87c49a ("Btrfs: snapshot-aware defrag").
Cleans up clang warning:
variable ‘inode’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Su Yue [Wed, 5 Sep 2018 03:07:33 +0000 (11:07 +0800)]
btrfs: defrag: use btrfs_mod_outstanding_extents in cluster_pages_for_defrag
Since commit
8b62f87bad9c ("Btrfs: rework outstanding_extents"),
manual operations of outstanding_extent in btrfs_inode are replaced by
btrfs_mod_outstanding_extents().
The one in cluster_pages_for_defrag seems to be lost, so replace it
of btrfs_mod_outstanding_extents().
Fixes:
8b62f87bad9c ("Btrfs: rework outstanding_extents")
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 5 Sep 2018 01:55:27 +0000 (09:55 +0800)]
Btrfs: remove confusing tracepoint in btrfs_add_reserved_bytes
Here we're not releasing any space, but transferring bytes from
->bytes_may_use to ->bytes_reserved. The last change to the code in
commit
18513091af9483ba8 ("btrfs: update btrfs_space_info's
bytes_may_use timely") removed a conditional tracepoint and the logic
changed too but the tracepiont remained.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 23:36:17 +0000 (07:36 +0800)]
btrfs: free path at an earlier point in btrfs_get_extent
trace_btrfs_get_extent() has nothing to do with path, place
btrfs_free_path ahead so that we can unlock path on error.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 22 Aug 2018 19:14:53 +0000 (03:14 +0800)]
Btrfs: use next_state in find_first_extent_bit
As next_state() is already defined to get the next state, use it in
find_first_extent_bit. No functional changes.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 21 Aug 2018 01:53:47 +0000 (09:53 +0800)]
btrfs: locking: Add extra check in btrfs_init_new_buffer() to avoid deadlock
[BUG]
For certain crafted image, whose csum root leaf has missing backref, if
we try to trigger write with data csum, it could cause deadlock with the
following kernel WARN_ON():
WARNING: CPU: 1 PID: 41 at fs/btrfs/locking.c:230 btrfs_tree_lock+0x3e2/0x400
CPU: 1 PID: 41 Comm: kworker/u4:1 Not tainted 4.18.0-rc1+ #8
Workqueue: btrfs-endio-write btrfs_endio_write_helper
RIP: 0010:btrfs_tree_lock+0x3e2/0x400
Call Trace:
btrfs_alloc_tree_block+0x39f/0x770
__btrfs_cow_block+0x285/0x9e0
btrfs_cow_block+0x191/0x2e0
btrfs_search_slot+0x492/0x1160
btrfs_lookup_csum+0xec/0x280
btrfs_csum_file_blocks+0x2be/0xa60
add_pending_csums+0xaf/0xf0
btrfs_finish_ordered_io+0x74b/0xc90
finish_ordered_fn+0x15/0x20
normal_work_helper+0xf6/0x500
btrfs_endio_write_helper+0x12/0x20
process_one_work+0x302/0x770
worker_thread+0x81/0x6d0
kthread+0x180/0x1d0
ret_from_fork+0x35/0x40
[CAUSE]
That crafted image has missing backref for csum tree root leaf. And
when we try to allocate new tree block, since there is no
EXTENT/METADATA_ITEM for csum tree root, btrfs consider it's free slot
and use it.
The extent tree of the image looks like:
Normal image | This fuzzed image
----------------------------------+--------------------------------
BG
29360128 | BG
29360128
One empty slot | One empty slot
29364224: backref to UUID tree |
29364224: backref to UUID tree
Two empty slots | Two empty slots
29376512: backref to CSUM tree | One empty slot (bad type) <<<
29380608: backref to D_RELOC tree |
29380608: backref to D_RELOC tree
... | ...
Since bytenr
29376512 has no METADATA/EXTENT_ITEM, when btrfs try to
alloc tree block, it's an valid slot for btrfs.
And for finish_ordered_write, when we need to insert csum, we try to CoW
csum tree root.
By accident, empty slots at bytenr BG_OFFSET, BG_OFFSET + 8K,
BG_OFFSET + 12K is already used by tree block COW for other trees, the
next empty slot is BG_OFFSET + 16K, which should be the backref for CSUM
tree.
But due to the bad type, btrfs can recognize it and still consider it as
an empty slot, and will try to use it for csum tree CoW.
Then in the following call trace, we will try to lock the new tree
block, which turns out to be the old csum tree root which is already
locked:
btrfs_search_slot() called on csum tree root, which is at
29376512
|- btrfs_cow_block()
|- btrfs_set_lock_block()
| |- Now locks tree block
29376512 (old csum tree root)
|- __btrfs_cow_block()
|- btrfs_alloc_tree_block()
|- btrfs_reserve_extent()
| Now it returns tree block
29376512, which extent tree
| shows its empty slot, but it's already hold by csum tree
|- btrfs_init_new_buffer()
|- btrfs_tree_lock()
| Triggers WARN_ON(eb->lock_owner == current->pid)
|- wait_event()
Wait lock owner to release the lock, but it's
locked by ourself, so it will deadlock
[FIX]
This patch will do the lock_owner and current->pid check at
btrfs_init_new_buffer().
So above deadlock can be avoided.
Since such problem can only happen in crafted image, we will still
trigger kernel warning for later aborted transaction, but with a little
more meaningful warning message.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200405
Reported-by: Xu Wen <wen.xu@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 21 Aug 2018 01:42:03 +0000 (09:42 +0800)]
btrfs: Handle owner mismatch gracefully when walking up tree
[BUG]
When mounting certain crafted image, btrfs will trigger kernel BUG_ON()
when trying to recover balance:
kernel BUG at fs/btrfs/extent-tree.c:8956!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 662 Comm: mount Not tainted 4.18.0-rc1-custom+ #10
RIP: 0010:walk_up_proc+0x336/0x480 [btrfs]
RSP: 0018:
ffffb53540c9b890 EFLAGS:
00010202
Call Trace:
walk_up_tree+0x172/0x1f0 [btrfs]
btrfs_drop_snapshot+0x3a4/0x830 [btrfs]
merge_reloc_roots+0xe1/0x1d0 [btrfs]
btrfs_recover_relocation+0x3ea/0x420 [btrfs]
open_ctree+0x1af3/0x1dd0 [btrfs]
btrfs_mount_root+0x66b/0x740 [btrfs]
mount_fs+0x3b/0x16a
vfs_kern_mount.part.9+0x54/0x140
btrfs_mount+0x16d/0x890 [btrfs]
mount_fs+0x3b/0x16a
vfs_kern_mount.part.9+0x54/0x140
do_mount+0x1fd/0xda0
ksys_mount+0xba/0xd0
__x64_sys_mount+0x21/0x30
do_syscall_64+0x60/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[CAUSE]
Extent tree corruption. In this particular case, reloc tree root's
owner is DATA_RELOC_TREE (should be TREE_RELOC), thus its backref is
corrupted and we failed the owner check in walk_up_tree().
[FIX]
It's pretty hard to take care of every extent tree corruption, but at
least we can remove such BUG_ON() and exit more gracefully.
And since in this particular image, DATA_RELOC_TREE and TREE_RELOC share
the same root (which is obviously invalid), we needs to make
__del_reloc_root() more robust to detect such invalid sharing to avoid
possible NULL dereference as root->node can be NULL in this case.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200411
Reported-by: Xu Wen <wen.xu@gatech.edu>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
zhong jiang [Thu, 16 Aug 2018 16:37:15 +0000 (00:37 +0800)]
btrfs: change btrfs_pin_log_trans to return void
btrfs_pin_log_trans defines the variable "ret" for return value, but it
is not modified after initialization. Further, I find that none of the
callers do handles the return value, so it is safe to drop the unneeded
"ret" and make it return void.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
zhong jiang [Thu, 16 Aug 2018 16:37:14 +0000 (00:37 +0800)]
btrfs: change btrfs_free_reserved_bytes to return void
btrfs_free_reserved_bytes uses the variable "ret" for return value,
but it is not modified after initialzation. Further, I find that any of
the callers do not handle the return value, so it is safe to drop the
unneeded "ret" and return void. There are no callees that would need the
function to handle or pass the value either.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Thu, 16 Aug 2018 21:05:28 +0000 (05:05 +0800)]
Btrfs: remove always true if branch in btrfs_get_extent
@path is always NULL when it comes to the if branch.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 10 Aug 2018 02:20:26 +0000 (10:20 +0800)]
btrfs: qgroup: Dirty all qgroups before rescan
[BUG]
In the following case, rescan won't zero out the number of qgroup 1/0:
$ mkfs.btrfs -fq $DEV
$ mount $DEV /mnt
$ btrfs quota enable /mnt
$ btrfs qgroup create 1/0 /mnt
$ btrfs sub create /mnt/sub
$ btrfs qgroup assign 0/257 1/0 /mnt
$ dd if=/dev/urandom of=/mnt/sub/file bs=1k count=1000
$ btrfs sub snap /mnt/sub /mnt/snap
$ btrfs quota rescan -w /mnt
$ btrfs qgroup show -pcre /mnt
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16.00KiB 16.00KiB none none --- ---
0/257 1016.00KiB 16.00KiB none none 1/0 ---
0/258 1016.00KiB 16.00KiB none none --- ---
1/0 1016.00KiB 16.00KiB none none --- 0/257
So far so good, but:
$ btrfs qgroup remove 0/257 1/0 /mnt
WARNING: quotas may be inconsistent, rescan needed
$ btrfs quota rescan -w /mnt
$ btrfs qgroup show -pcre /mnt
qgoupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16.00KiB 16.00KiB none none --- ---
0/257 1016.00KiB 16.00KiB none none --- ---
0/258 1016.00KiB 16.00KiB none none --- ---
1/0 1016.00KiB 16.00KiB none none --- ---
^^^^^^^^^^ ^^^^^^^^ not cleared
[CAUSE]
Before rescan we call qgroup_rescan_zero_tracking() to zero out all
qgroups' accounting numbers.
However we don't mark all qgroups dirty, but rely on rescan to do so.
If we have any high level qgroup without children, it won't be marked
dirty during rescan, since we cannot reach that qgroup.
This will cause QGROUP_INFO items of childless qgroups never get updated
in the quota tree, thus their numbers will stay the same in "btrfs
qgroup show" output.
[FIX]
Just mark all qgroups dirty in qgroup_rescan_zero_tracking(), so even if
we have childless qgroups, their QGROUP_INFO items will still get
updated during rescan.
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Tested-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Tue, 14 Aug 2018 18:09:52 +0000 (11:09 -0700)]
Btrfs: clean up scrub is_dev_replace parameter
struct scrub_ctx has an ->is_dev_replace member, so there's no point in
passing around is_dev_replace where sctx is available.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Fri, 10 Aug 2018 05:53:21 +0000 (13:53 +0800)]
btrfs: add helper to obtain number of devices with ongoing dev-replace
When the replace is running the fs_devices::num_devices also includes
the replaced device, however in some operations like device delete and
balance it needs the actual num_devices without the repalced devices.
The function btrfs_num_devices() just provides that.
And here is a scenario how balance and repalce items could co-exist:
Consider balance is started and paused, now start the replace followed
by a unmount or system power-cycle. During following mount, the
open_ctree() first restarts the balance so it must check for the device
replace otherwise our num_devices calculation will be wrong.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Fri, 10 Aug 2018 05:53:20 +0000 (13:53 +0800)]
btrfs: add assertions where number of devices could go below 0
In preparation to add helper function to deduce the num_devices with
replace running, use assert instead of BUG_ON or WARN_ON. The number of
devices would not normally drop to 0 due to other checks so the assert
is sufficient.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog, adjust the assert condition ]
Signed-off-by: David Sterba <dsterba@suse.com>
zhong jiang [Mon, 13 Aug 2018 06:06:08 +0000 (14:06 +0800)]
btrfs: remove unneeded NULL checks before kfree
Kfree has taken the NULL pointer into account. So remove the check
before kfree.
The issue is detected with the help of Coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Tue, 14 Aug 2018 02:46:53 +0000 (10:46 +0800)]
Btrfs: do not unnecessarily pass write_lock_level when processing leaf
As we're going to return right after the call, it's not necessary to get
update the new write_lock_level from unlock_up.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Misono Tomohiro [Mon, 6 Aug 2018 05:25:24 +0000 (14:25 +0900)]
btrfs: Remove 'objectid' member from struct btrfs_root
There are two members in struct btrfs_root which indicate root's
objectid: objectid and root_key.objectid.
They are both set to the same value in __setup_root():
static void __setup_root(struct btrfs_root *root,
struct btrfs_fs_info *fs_info,
u64 objectid)
{
...
root->objectid = objectid;
...
root->root_key.objectid = objecitd;
...
}
and not changed to other value after initialization.
grep in btrfs directory shows both are used in many places:
$ grep -rI "root->root_key.objectid" | wc -l
133
$ grep -rI "root->objectid" | wc -l
55
(4.17, inc. some noise)
It is confusing to have two similar variable names and it seems
that there is no rule about which should be used in a certain case.
Since ->root_key itself is needed for tree reloc tree, let's remove
'objecitd' member and unify code to use ->root_key.objectid in all places.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lu Fengqi [Sat, 4 Aug 2018 13:10:56 +0000 (21:10 +0800)]
btrfs: remove a useless return statement in btrfs_block_rsv_add
Since ret must be 0 here, don't have to return. No functional change
and code readability is not hurt.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lu Fengqi [Sat, 4 Aug 2018 13:10:57 +0000 (21:10 +0800)]
btrfs: Remove root parameter from btrfs_insert_dir_item
All callers pass the root tree of dir, we can push that down to the
function itself.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lu Fengqi [Sat, 4 Aug 2018 13:10:55 +0000 (21:10 +0800)]
btrfs: switch update_size to bool in btrfs_block_rsv_migrate and btrfs_rsv_add_bytes
Using true and false here is closer to the expected semantic than using
0 and 1. No functional change.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lu Fengqi [Sat, 4 Aug 2018 13:10:53 +0000 (21:10 +0800)]
btrfs: simplify the send_in_progress check in btrfs_delete_subvolume
Only when send_in_progress, we have to do something different such as
btrfs_warn() and return -EPERM. Therefore, we could check
send_in_progress first and process error handling, after the
root_item_lock has been got.
Just for better readability. No functional change.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Greg Kroah-Hartman [Mon, 15 Oct 2018 05:20:24 +0000 (07:20 +0200)]
Linux 4.19-rc8
Greg Kroah-Hartman [Sun, 14 Oct 2018 06:34:31 +0000 (08:34 +0200)]
Merge tag 'libnvdimm-fixes-4.19-rc8' of git://git./linux/kernel/git/nvdimm/nvdimm
Dan writes:
"libnvdimm/dax 4.19-rc8
* Fix a livelock in dax_layout_busy_page() present since v4.18. The
lockup triggers when truncating an actively mapped huge page out of
a mapping pinned for direct-I/O.
* Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5
mprotect() clears this flag that is needed to communicate the
liveness of device pages to the get_user_pages() path."
* tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm: Preserve _PAGE_DEVMAP across mprotect() calls
filesystem-dax: Fix dax_layout_busy_page() livelock
Greg Kroah-Hartman [Sun, 14 Oct 2018 06:33:35 +0000 (08:33 +0200)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Wolfram writes:
"i2c fix for 4.19:
I2C has one documentation bugfix for something we changed during the
v4.19 cycle"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: Fix kerneldoc for renamed i2c dma put function
Greg Kroah-Hartman [Sat, 13 Oct 2018 13:11:15 +0000 (15:11 +0200)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Paolo writes:
"KVM fixes for 4.19-rc8
Leftover bugfixes."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
KVM: x86: support CONFIG_KVM_AMD=y with CONFIG_CRYPTO_DEV_CCP_DD=m
ARM: KVM: Correctly order SGI register entries in the cp15 array
Vitaly Kuznetsov [Thu, 11 Oct 2018 10:03:12 +0000 (12:03 +0200)]
KVM: vmx: hyper-v: don't pass EPT configuration info to vmx_hv_remote_flush_tlb()
I'm observing random crashes in multi-vCPU L2 guests running on KVM on
Hyper-V. I bisected the issue to the commit
877ad952be3d ("KVM: vmx: Add
tlb_remote_flush callback support"). Hyper-V TLFS states:
"AddressSpace specifies an address space ID (an EPT PML4 table pointer)"
So apparently, Hyper-V doesn't expect us to pass naked EPTP, only PML4
pointer should be used. Strip off EPT configuration information before
calling into vmx_hv_remote_flush_tlb().
Fixes:
877ad952be3d ("KVM: vmx: Add tlb_remote_flush callback support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Richard Weinberger [Sat, 13 Oct 2018 08:18:41 +0000 (10:18 +0200)]
ubifs: Fix WARN_ON logic in exit path
ubifs_assert() is not WARN_ON(), so we have to invert
the checks.
Randy faced this warning with UBIFS being a module, since
most users use UBIFS as builtin because UBIFS is the rootfs
nobody noticed so far. :-(
Including me.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes:
54169ddd382d ("ubifs: Turn two ubifs_assert() into a WARN_ON()")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:31:19 +0000 (09:31 +0200)]
Merge branch 'akpm'
Fixes from Andrew:
* akpm:
fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
ocfs2: fix a GCC warning
Khazhismel Kumykov [Sat, 13 Oct 2018 04:34:40 +0000 (21:34 -0700)]
fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
On non-preempt kernels this loop can take a long time (more than 50 ticks)
processing through entries.
Link: http://lkml.kernel.org/r/20181010172623.57033-1-khazhy@google.com
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jérôme Glisse [Sat, 13 Oct 2018 04:34:36 +0000 (21:34 -0700)]
mm/thp: fix call to mmu_notifier in set_pmd_migration_entry() v2
Inside set_pmd_migration_entry() we are holding page table locks and thus
we can not sleep so we can not call invalidate_range_start/end()
So remove call to mmu_notifier_invalidate_range_start/end() because they
are call inside the function calling set_pmd_migration_entry() (see
try_to_unmap_one()).
Link: http://lkml.kernel.org/r/20181012181056.7864-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Sat, 13 Oct 2018 04:34:32 +0000 (21:34 -0700)]
mm/mmap.c: don't clobber partially overlapping VMA with MAP_FIXED_NOREPLACE
Daniel Micay reports that attempting to use MAP_FIXED_NOREPLACE in an
application causes that application to randomly crash. The existing check
for handling MAP_FIXED_NOREPLACE looks up the first VMA that either
overlaps or follows the requested region, and then bails out if that VMA
overlaps *the start* of the requested region. It does not bail out if the
VMA only overlaps another part of the requested region.
Fix it by checking that the found VMA only starts at or after the end of
the requested region, in which case there is no overlap.
Test case:
user@debian:~$ cat mmap_fixed_simple.c
#include <sys/mman.h>
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#ifndef MAP_FIXED_NOREPLACE
#define MAP_FIXED_NOREPLACE 0x100000
#endif
int main(void) {
char *p;
errno = 0;
p = mmap((void*)0x10001000, 0x4000, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
printf("p1=%p err=%m\n", p);
errno = 0;
p = mmap((void*)0x10000000, 0x2000, PROT_READ,
MAP_PRIVATE|MAP_ANONYMOUS|MAP_FIXED_NOREPLACE, -1, 0);
printf("p2=%p err=%m\n", p);
char cmd[100];
sprintf(cmd, "cat /proc/%d/maps", getpid());
system(cmd);
return 0;
}
user@debian:~$ gcc -o mmap_fixed_simple mmap_fixed_simple.c
user@debian:~$ ./mmap_fixed_simple
p1=0x10001000 err=Success
p2=0x10000000 err=Success
10000000-
10002000 r--p
00000000 00:00 0
10002000-
10005000 ---p
00000000 00:00 0
564a9a06f000-
564a9a070000 r-xp
00000000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a26f000-
564a9a270000 r--p
00000000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a270000-
564a9a271000 rw-p
00001000 fe:01 264004
/home/user/mmap_fixed_simple
564a9a54a000-
564a9a56b000 rw-p
00000000 00:00 0 [heap]
7f8eba447000-
7f8eba5dc000 r-xp
00000000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba5dc000-
7f8eba7dc000 ---p
00195000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7dc000-
7f8eba7e0000 r--p
00195000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e0000-
7f8eba7e2000 rw-p
00199000 fe:01 405885
/lib/x86_64-linux-gnu/libc-2.24.so
7f8eba7e2000-
7f8eba7e6000 rw-p
00000000 00:00 0
7f8eba7e6000-
7f8eba809000 r-xp
00000000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8eba9e9000-
7f8eba9eb000 rw-p
00000000 00:00 0
7f8ebaa06000-
7f8ebaa09000 rw-p
00000000 00:00 0
7f8ebaa09000-
7f8ebaa0a000 r--p
00023000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0a000-
7f8ebaa0b000 rw-p
00024000 fe:01 405876
/lib/x86_64-linux-gnu/ld-2.24.so
7f8ebaa0b000-
7f8ebaa0c000 rw-p
00000000 00:00 0
7ffcc99fa000-
7ffcc9a1b000 rw-p
00000000 00:00 0 [stack]
7ffcc9b44000-
7ffcc9b47000 r--p
00000000 00:00 0 [vvar]
7ffcc9b47000-
7ffcc9b49000 r-xp
00000000 00:00 0 [vdso]
ffffffffff600000-
ffffffffff601000 r-xp
00000000 00:00 0
[vsyscall]
user@debian:~$ uname -a
Linux debian 4.19.0-rc6+ #181 SMP Wed Oct 3 23:43:42 CEST 2018 x86_64 GNU/Linux
user@debian:~$
As you can see, the first page of the mapping at 0x10001000 was clobbered.
Link: http://lkml.kernel.org/r/20181010152736.99475-1-jannh@google.com
Fixes:
a4ff8e8620d3 ("mm: introduce MAP_FIXED_NOREPLACE")
Signed-off-by: Jann Horn <jannh@google.com>
Reported-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhong jiang [Sat, 13 Oct 2018 04:34:26 +0000 (21:34 -0700)]
ocfs2: fix a GCC warning
Fix the following compile warning:
fs/ocfs2/dlmglue.c:99:30: warning:
\91lockdep_keys
\92 defined but not used [-Wunused-variable]
static struct lock_class_key lockdep_keys[OCFS2_NUM_LOCK_TYPES];
Link: http://lkml.kernel.org/r/1536938148-32110-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:07:23 +0000 (09:07 +0200)]
Merge tag 'for-linus-
20181012' of git://git.kernel.dk/linux-block
Jens writes:
"block fix for 4.19-rc
Just a single fix that should go in, fixing a regression introduced
in the blk-wbt code."
* tag 'for-linus-
20181012' of git://git.kernel.dk/linux-block:
blk-wbt: wake up all when we scale up, not down
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:06:27 +0000 (09:06 +0200)]
Merge tag 'gfs2-4.19.fixes3' of git://git./linux/kernel/git/gfs2/linux-gfs2
Andreas writes:
"gfs2 4.19 fixes
Fix iomap buffered write support for journaled files"
* tag 'gfs2-4.19.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix iomap buffered write support for journaled files (2)
Greg Kroah-Hartman [Sat, 13 Oct 2018 07:05:37 +0000 (09:05 +0200)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Will writes:
"More arm64 fixes
- Reject CHAIN PMU events when they are not part of a 64-bit counter
- Fix WARN_ON_ONCE() that triggers for reserved regions that don't
correspond to mapped memory"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: Reject stand-alone CHAIN events for PMUv3
arm64: Fix /proc/iomem for reserved but not memory regions
Greg Kroah-Hartman [Fri, 12 Oct 2018 15:41:27 +0000 (17:41 +0200)]
Merge tag 'armsoc-fixes-4.19' of git://git./linux/kernel/git/arm/arm-soc
Arnd writes:
"ARM: SoC fixes for 4.19
Two last minute bugfixes, both for NXP platforms:
* The Layerscape 'qbman' infrastructure suffers from probe ordering
bugs in some configurations, a two-patch series adds a hotfix for
this. 4.20 will have a longer set of patches to rework it.
* The old imx53-qsb board regressed in 4.19 after the addition
of cpufreq support, adding a set of explicit operating points
fixes this."
* tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
soc: fsl: qman_portals: defer probe after qman's probe
soc: fsl: qbman: add APIs to retrieve the probing status
ARM: dts: imx53-qsb: disable 1.2GHz OPP
David Howells [Fri, 12 Oct 2018 13:00:57 +0000 (14:00 +0100)]
afs: Fix afs_server struct leak
Fix a leak of afs_server structs. The routine that installs them in the
various lookup lists and trees gets a ref on leaving the function, whether
it added the server or a server already exists. It shouldn't increment
the refcount if it added the server.
The effect of this that "rmmod kafs" will hang waiting for the leaked
server to become unused.
Fixes:
d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Rosin [Fri, 12 Oct 2018 14:46:46 +0000 (14:46 +0000)]
MAINTAINERS: use the correct location for dt-bindings includes for mux
Just drop the "linux" part of the path, it was never correct.
Reported-by: Joe Perches <joe@perches.com>
Fixes:
256ac0375098 ("dt-bindings: document devicetree bindings for mux-controllers and gpio-mux")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Rosin [Fri, 12 Oct 2018 14:46:40 +0000 (14:46 +0000)]
mux: adgs1408: use the correct MODULE_LICENSE
The file is GPL v2 or later.
Acked-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Gruenbacher [Wed, 10 Oct 2018 20:18:18 +0000 (21:18 +0100)]
gfs2: Fix iomap buffered write support for journaled files (2)
It turns out that the fix in commit
6636c3cc56 is bad; the assertion
that the iomap code no longer creates buffer heads is incorrect for
filesystems that set the IOMAP_F_BUFFER_HEAD flag.
Instead, what's happening is that gfs2_iomap_begin_write treats all
files that have the jdata flag set as journaled files, which is
incorrect as long as those files are inline ("stuffed"). We're handling
stuffed files directly via the page cache, which is why we ended up with
pages without buffer heads in gfs2_page_add_databufs.
Fix this by handling stuffed journaled files correctly in
gfs2_iomap_begin_write.
This reverts commit
6636c3cc5690c11631e6366cf9a28fb99c8b25bb.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Will Deacon [Fri, 5 Oct 2018 12:24:36 +0000 (13:24 +0100)]
arm64: perf: Reject stand-alone CHAIN events for PMUv3
It doesn't make sense for a perf event to be configured as a CHAIN event
in isolation, so extend the arm_pmu structure with a ->filter_match()
function to allow the backend PMU implementation to reject CHAIN events
early.
Cc: <stable@vger.kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 11 Oct 2018 10:29:14 +0000 (11:29 +0100)]
arm64: Fix /proc/iomem for reserved but not memory regions
We describe ranges of 'reserved' memory to userspace via /proc/iomem.
Commit
50d7ba36b916 ("arm64: export memblock_reserve()d regions via
/proc/iomem") updated the logic to export regions that were reserved
because their contents should be preserved. This allowed kexec-tools
to tell the difference between 'reserved' memory that must be
preserved and not overwritten, (e.g. the ACPI tables), and 'nomap'
memory that must not be touched without knowing the memory-attributes
(e.g. RAS CPER regions).
The above commit wrongly assumed that memblock_reserve() would not
be used to reserve regions that aren't memory. It turns out this is
exactly what early_init_dt_reserve_memory_arch() will do if it finds
a DT reserved-memory that was also carved out of the memory node, which
results in a WARN_ON_ONCE() and the region being reserved instead of
ignored. The ramoops description on hikey and dragonboard-410c both do
this, so we can't simply write this configuration off as "buggy firmware".
Avoid this issue by rewriting reserve_memblock_reserved_regions() so
that only the portions of reserved regions which overlap with mapped
memory are actually reserved.
Fixes:
50d7ba36b916 ("arm64: export memblock_reserve()d regions via /proc/iomem")
Reported-by: John Stultz <john.stultz@linaro.org>
Reported-by: Paolo Pisati <p.pisati@gmail.com>
CC: Akashi Takahiro <takahiro.akashi@linaro.org>
CC: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
David Howells [Thu, 11 Oct 2018 21:45:49 +0000 (22:45 +0100)]
afs: Fix cell proc list
Access to the list of cells by /proc/net/afs/cells has a couple of
problems:
(1) It should be checking against SEQ_START_TOKEN for the keying the
header line.
(2) It's only holding the RCU read lock, so it can't just walk over the
list without following the proper RCU methods.
Fix these by using an hlist instead of an ordinary list and using the
appropriate accessor functions to follow it with RCU.
Since the code that adds a cell to the list must also necessarily change,
sort the list on insertion whilst we're at it.
Fixes:
989782dcdc91 ("afs: Overhaul cell database management")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:57:05 +0000 (12:57 +0200)]
Merge tag 'mmc-v4.19-rc7' of git://git./linux/kernel/git/ulfh/mmc
Ulf writes:
"MMC core:
- Avoid fragile multiblock reads for the last sector in SPI mode
WIFI/SDIO:
- libertas: Fixup suspend sequence for the SDIO card"
* tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
libertas: call into generic suspend code before turning off power
mmc: block: avoid multiblock reads for the last sector in SPI mode
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:56:25 +0000 (12:56 +0200)]
Merge tag 'gpio-v4.19-4' of git://git./linux/kernel/git/linusw/linux-gpio
Linus writes:
"GPIO fix for the v4.19 series:
- Fix up the interrupt parent for the irqdomains."
* tag 'gpio-v4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Assign gpio_irq_chip::parents to non-stack pointer
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:55:47 +0000 (12:55 +0200)]
Merge tag 'pinctrl-v4.19-5' of git://git./linux/kernel/git/linusw/linux-pinctrl
Linus writes:
"pin control fix for v4.19:
A single pin control fix for v4.19:
- Interrupt setup in the MCP23S08 driver."
* tag 'pinctrl-v4.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mcp23s08: fix irq and irqchip setup order
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:54:26 +0000 (12:54 +0200)]
Merge tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd
Boris writes:
"mdt: fix for 4.19-rc8
* Fix a stack overflow in lib/bch.c"
* tag 'mtd/fixes-for-4.19-rc8' of git://git.infradead.org/linux-mtd:
lib/bch: fix possible stack overrun
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:53:48 +0000 (12:53 +0200)]
Merge tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19-rc8
single nouveau runtime reference and mst change"
* tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:53:06 +0000 (12:53 +0200)]
Merge tag 'for-gkh' of git://git./linux/kernel/git/rdma/rdma
Doug writes:
"RDMA fixes:
Final for-rc pull request for 4.19
We only have one bug to submit this time around. It fixes a DMA
unmap issue where we unmapped the DMA address from the IOMMU before
we did from the card, resulting in a DMAR error with IOMMU enabled,
or possible crash without."
* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Unmap DMA addr from HCA before IOMMU
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:35:02 +0000 (12:35 +0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Dmitry writes:
"Input updates for v4.19-rc7
- we added a few scheduling points into various input interfaces to
ensure that large writes will not cause RCU stalls
- fixed configuring PS/2 keyboards as wakeup devices on newer
platforms
- added a new Xbox gamepad ID."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: uinput - add a schedule point in uinput_inject_events()
Input: evdev - add a schedule point in evdev_write()
Input: mousedev - add a schedule point in mousedev_write()
Input: i8042 - enable keyboard wakeups by default when s2idle is used
Input: xpad - add support for Xbox1 PDP Camo series gamepad
Greg Kroah-Hartman [Fri, 12 Oct 2018 10:33:54 +0000 (12:33 +0200)]
Merge tag 'next-fixes-
20181012' of git://git./linux/kernel/git/sfr/next-fixes
Stephen writes:
"A couple of warning fixes:
Two fixes from Peter Oberparleiter <oberpar@linux.ibm.com>:
Commit
6b7dca401cb1 ("tracing: Allow gcov profiling on only ftrace subsystem")
uncovered linker problems when using gcov kernel profiling on some
architectures. These problems were likely introduced earlier, and are
possibly related to compiler changes."
* tag 'next-fixes-
20181012' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
vmlinux.lds.h: Fix linker warnings about orphan .LPBX sections
vmlinux.lds.h: Fix incomplete .text.exit discards
Arnd Bergmann [Thu, 11 Oct 2018 11:06:17 +0000 (13:06 +0200)]
lib/bch: fix possible stack overrun
The previous patch introduced very large kernel stack usage and a Makefile
change to hide the warning about it.
From what I can tell, a number of things went wrong here:
- The BCH_MAX_T constant was set to the maximum value for 'n',
not the maximum for 't', which is much smaller.
- The stack usage is actually larger than the entire kernel stack
on some architectures that can use 4KB stacks (m68k, sh, c6x), which
leads to an immediate overrun.
- The justification in the patch description claimed that nothing
changed, however that is not the case even without the two points above:
the configuration is machine specific, and most boards never use the
maximum BCH_ECC_WORDS() length but instead have something much smaller.
That maximum would only apply to machines that use both the maximum
block size and the maximum ECC strength.
The largest value for 't' that I could find is '32', which in turn leads
to a 60 byte array instead of 2048 bytes. Making it '64' for future
extension seems also worthwhile, with 120 bytes for the array. Anything
larger won't fit into the OOB area on NAND flash.
With that changed, the warning can be enabled again.
Only linux-4.19+ contains the breakage, so this is only needed
as a stable backport if it does not make it into the release.
Fixes:
02361bc77888 ("lib/bch: Remove VLA usage")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Greg Kroah-Hartman [Fri, 12 Oct 2018 07:01:59 +0000 (09:01 +0200)]
Merge git://git./linux/kernel/git/davem/net
David writes:
"Networking
1) RXRPC receive path fixes from David Howells.
2) Re-export __skb_recv_udp(), from Jiri Kosina.
3) Fix refcounting in u32 classificer, from Al Viro.
4) Userspace netlink ABI fixes from Eugene Syromiatnikov.
5) Don't double iounmap on rmmod in ena driver, from Arthur
Kiyanovski.
6) Fix devlink string attribute handling, we must pull a copy into a
kernel buffer if the lifetime extends past the netlink request.
From Moshe Shemesh.
7) Fix hangs in RDS, from Ka-Cheong Poon.
8) Fix recursive locking lockdep warnings in tipc, from Ying Xue.
9) Clear RX irq correctly in socionext, from Ilias Apalodimas.
10) bcm_sf2 fixes from Florian Fainelli."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
net: dsa: bcm_sf2: Call setup during switch resume
net: dsa: bcm_sf2: Fix unbind ordering
net: phy: sfp: remove sfp_mutex's definition
r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
net: socionext: clear rx irq correctly
net/mlx4_core: Fix warnings during boot on driverinit param set failures
tipc: eliminate possible recursive locking detected by LOCKDEP
selftests: udpgso_bench.sh explicitly requires bash
selftests: rtnetlink.sh explicitly requires bash.
qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
tipc: queue socket protocol error messages into socket receive buffer
tipc: set link tolerance correctly in broadcast link
net: ipv4: don't let PMTU updates increase route MTU
net: ipv4: update fnhe_pmtu when first hop's MTU changes
net/ipv6: stop leaking percpu memory in fib6 info
rds: RDS (tcp) hangs on sendto() to unresponding address
net: make skb_partial_csum_set() more robust against overflows
devlink: Add helper function for safely copy string param
devlink: Fix param cmode driverinit for string type
devlink: Fix param set handling for string type
...
David S. Miller [Thu, 11 Oct 2018 22:20:00 +0000 (15:20 -0700)]
Merge branch 'net-dsa-bcm_sf2-Couple-of-fixes'
Florian Fainelli says:
====================
net: dsa: bcm_sf2: Couple of fixes
Here are two fixes for the bcm_sf2 driver that were found during
testing unbind and analysing another issue during system
suspend/resume.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 9 Oct 2018 23:48:58 +0000 (16:48 -0700)]
net: dsa: bcm_sf2: Call setup during switch resume
There is no reason to open code what the switch setup function does, in
fact, because we just issued a switch reset, we would make all the
register get their default values, including for instance, having unused
port be enabled again and wasting power and leading to an inappropriate
switch core clock being selected.
Fixes:
8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 9 Oct 2018 23:48:57 +0000 (16:48 -0700)]
net: dsa: bcm_sf2: Fix unbind ordering
The order in which we release resources is unfortunately leading to bus
errors while dismantling the port. This is because we set
priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now
permissible to clock gate the switch. Later on, when dsa_slave_destroy()
comes in from dsa_unregister_switch() and calls
dsa_switch_ops::port_disable, we perform the same dismantling again, and
this time we hit registers that are clock gated.
Make sure that dsa_unregister_switch() is the first thing that happens,
which takes care of releasing all user visible resources, then proceed
with clock gating hardware. We still need to set priv->wol_ports_mask to
0 to make sure that an enabled port properly gets disabled in case it
was previously used as part of Wake-on-LAN.
Fixes:
d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Oberparleiter [Thu, 13 Sep 2018 11:00:00 +0000 (13:00 +0200)]
vmlinux.lds.h: Fix linker warnings about orphan .LPBX sections
Enabling both CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y and
CONFIG_GCOV_PROFILE_ALL=y results in linker warnings:
warning: orphan section `.data..LPBX1' being placed in
section `.data..LPBX1'.
LD_DEAD_CODE_DATA_ELIMINATION adds compiler flag -fdata-sections. This
option causes GCC to create separate data sections for data objects,
including those generated by GCC internally for gcov profiling. The
names of these objects start with a dot (.LPBX0, .LPBX1), resulting in
section names starting with 'data..'.
As section names starting with 'data..' are used for specific purposes
in the Linux kernel, the linker script does not automatically include
them in the output data section, resulting in the "orphan section"
linker warnings.
Fix this by specifically including sections named "data..LPBX*" in the
data section.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Peter Oberparleiter [Thu, 13 Sep 2018 10:59:59 +0000 (12:59 +0200)]
vmlinux.lds.h: Fix incomplete .text.exit discards
Enabling CONFIG_GCOV_PROFILE_ALL=y causes linker errors on ARM:
`.text.exit' referenced in section `.ARM.exidx.text.exit':
defined in discarded section `.text.exit'
`.text.exit' referenced in section `.fini_array.00100':
defined in discarded section `.text.exit'
And related errors on NDS32:
`.text.exit' referenced in section `.dtors.65435':
defined in discarded section `.text.exit'
The gcov compiler flags cause certain compiler versions to generate
additional destructor-related sections that are not yet handled by the
linker script, resulting in references between discarded and
non-discarded sections.
Since destructors are not used in the Linux kernel, fix this by
discarding these additional sections.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Greentime Hu <green.hu@gmail.com>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Stephen Boyd [Mon, 8 Oct 2018 14:55:20 +0000 (07:55 -0700)]
i2c: Fix kerneldoc for renamed i2c dma put function
This function was renamed in commit
82fe39a6bc7b ("i2c: refactor
function to release a DMA safe buffer") but this kernel doc wasn't
updated to point at the new function. Rename it.
Fixes:
82fe39a6bc7b ("i2c: refactor function to release a DMA safe buffer")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Josef Bacik [Thu, 11 Oct 2018 19:29:30 +0000 (15:29 -0400)]
blk-wbt: wake up all when we scale up, not down
Tetsuo brought to my attention that I screwed up the scale_up/scale_down
helpers when I factored out the rq-qos code. We need to wake up all the
waiters when we add slots for requests to make, not when we shrink the
slots. Otherwise we'll end up things waiting forever. This was a
mistake and simply puts everything back the way it was.
cc: stable@vger.kernel.org
Fixes:
a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
eported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sebastian Andrzej Siewior [Thu, 11 Oct 2018 15:06:21 +0000 (17:06 +0200)]
net: phy: sfp: remove sfp_mutex's definition
The sfp_mutex variable is defined but never used in this file. Not even
in the commit that introduced that variable.
Remove sfp_mutex, it has no purpose.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej S. Szmigiero [Thu, 11 Oct 2018 14:02:10 +0000 (16:02 +0200)]
r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips
It has been reported that since
commit
05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from
suspend.
The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig
register.
We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F
chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36
and RTL_GIGA_MAC_VER_38.
Curiously, the NIC seems to work fine after a system boot without having
this bit set as long as the system isn't suspended and resumed.
Fixes:
05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices")
Reported-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Thu, 11 Oct 2018 12:28:26 +0000 (15:28 +0300)]
net: socionext: clear rx irq correctly
commit
63ae7949e94a ("net: socionext: Use descriptor info instead of MMIO reads on Rx")
removed constant mmio reads from the driver and started using a descriptor
field to check if packet should be processed.
This lead the napi rx handler being constantly called while no packets
needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read
to clear the irq correcty after processing packets
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Moshe Shemesh [Thu, 11 Oct 2018 12:01:19 +0000 (15:01 +0300)]
net/mlx4_core: Fix warnings during boot on driverinit param set failures
During boot, mlx4_core sets the driverinit configuration parameters and
updates the devlink module on the initial values calling
devlink_param_driverinit_value_set().
If devlink_param_driverinit_value_set() returns an error mlx4_core
reports kernel module warning.
This caused false alarm during boot in case kernel was compiled with
CONFIG_NET_DEVLINK off.
Fix by removing warning reported in case
devlink_param_driverinit_value_set() fails.
This actually makes the function mlx4_devlink_set_init_value()
redundant to using directly devlink_param_driverinit_value_set() and so
removed.
It fixes the following kernel trace:
mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95)
mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95)
Fixes:
bd1b51dc66df ("mlx4: Add mlx4 initial parameters table and register it")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Thu, 11 Oct 2018 17:24:01 +0000 (19:24 +0200)]
Merge branch 'for-4.19-fixes' of git://git./linux/kernel/git/tj/cgroup
Tejun writes:
"cgroup fixes for v4.19-rc7
One cgroup2 threaded mode fix for v4.19-rc7. While threaded mode
isn't used widely (yet) and the bug requires somewhat convoluted
sequence of operations, it causes a userland visible malfunction -
EINVAL on a valid attempt to enable threaded mode. This pull request
contains the fix"
* 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix dom_cgrp propagation when enabling threaded mode
Ying Xue [Thu, 11 Oct 2018 11:57:56 +0000 (19:57 +0800)]
tipc: eliminate possible recursive locking detected by LOCKDEP
When booting kernel with LOCKDEP option, below warning info was found:
WARNING: possible recursive locking detected
4.19.0-rc7+ #14 Not tainted
--------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh
include/linux/spinlock.h:334 [inline]
00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850
but task is already holding lock:
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh
include/linux/spinlock.h:334 [inline]
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&list->lock)->rlock#4);
lock(&(&list->lock)->rlock#4);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by swapper/0/1:
#0:
00000000f7539d34 (pernet_ops_rwsem){+.+.}, at:
register_pernet_subsys+0x19/0x40 net/core/net_namespace.c:1051
#1:
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
spin_lock_bh include/linux/spinlock.h:334 [inline]
#1:
00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at:
tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849
stack backtrace:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7+ #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1af/0x295 lib/dump_stack.c:113
print_deadlock_bug kernel/locking/lockdep.c:1759 [inline]
check_deadlock kernel/locking/lockdep.c:1803 [inline]
validate_chain kernel/locking/lockdep.c:2399 [inline]
__lock_acquire+0xf1e/0x3c60 kernel/locking/lockdep.c:3411
lock_acquire+0x1db/0x520 kernel/locking/lockdep.c:3900
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline]
_raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168
spin_lock_bh include/linux/spinlock.h:334 [inline]
tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850
tipc_link_bc_create+0xb5/0x1f0 net/tipc/link.c:526
tipc_bcast_init+0x59b/0xab0 net/tipc/bcast.c:521
tipc_init_net+0x472/0x610 net/tipc/core.c:82
ops_init+0xf7/0x520 net/core/net_namespace.c:129
__register_pernet_operations net/core/net_namespace.c:940 [inline]
register_pernet_operations+0x453/0xac0 net/core/net_namespace.c:1011
register_pernet_subsys+0x28/0x40 net/core/net_namespace.c:1052
tipc_init+0x83/0x104 net/tipc/core.c:140
do_one_initcall+0x109/0x70a init/main.c:885
do_initcall_level init/main.c:953 [inline]
do_initcalls init/main.c:961 [inline]
do_basic_setup init/main.c:979 [inline]
kernel_init_freeable+0x4bd/0x57f init/main.c:1144
kernel_init+0x13/0x180 init/main.c:1063
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413
The reason why the noise above was complained by LOCKDEP is because we
nested to hold l->wakeupq.lock and l->inputq->lock in tipc_link_reset
function. In fact it's unnecessary to move skb buffer from l->wakeupq
queue to l->inputq queue while holding the two locks at the same time.
Instead, we can move skb buffers in l->wakeupq queue to a temporary
list first and then move the buffers of the temporary list to l->inputq
queue, which is also safe for us.
Fixes:
3f32d0be6c16 ("tipc: lock wakeup & inputq at tipc_link_reset()")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Thu, 11 Oct 2018 17:23:07 +0000 (19:23 +0200)]
Merge tag 'kbuild-fixes-v4.19-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Masahiro writes:
"Kbuild fixes for v4.19 (2nd)
- Fix warnings from recordmcount.pl when building with Clang
- Allow Clang to use GNU toolchains correctly
- Disable CONFIG_SAMPLES for UML to avoid build error"
* tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: disable CONFIG_SAMPLES for UML
kbuild: allow to use GCC toolchain not in Clang search path
ftrace: Build with CPPFLAGS to get -Qunused-arguments
David S. Miller [Thu, 11 Oct 2018 17:19:46 +0000 (10:19 -0700)]
Merge branch 'net-explicitly-requires-bash-when-needed'
Paolo Abeni says:
====================
net: explicitly requires bash when needed.
Some test scripts require bash-only features but use the default shell.
This may cause random failures if the default shell is not bash.
Instead of doing a potentially complex rewrite of such scripts, these patches
require the bash interpreter, where needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 11 Oct 2018 08:54:53 +0000 (10:54 +0200)]
selftests: udpgso_bench.sh explicitly requires bash
The udpgso_bench.sh script requires several bash-only features. This
may cause random failures if the default shell is not bash.
Address the above explicitly requiring bash as the script interpreter
Fixes:
3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 11 Oct 2018 08:54:52 +0000 (10:54 +0200)]
selftests: rtnetlink.sh explicitly requires bash.
the script rtnetlink.sh requires a bash-only features (sleep with sub-second
precision). This may cause random test failure if the default shell is not
bash.
Address the above explicitly requiring bash as the script interpreter.
Fixes:
33b01b7b4f19 ("selftests: add rtnetlink test script")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Thu, 11 Oct 2018 17:10:30 +0000 (19:10 +0200)]
Merge tag 'alloc-args-v4.19-rc8' of https://git./linux/kernel/git/kees/linux
Kees writes:
"Fix open-coded multiplication arguments to allocators
- Fixes several new open-coded multiplications added in the 4.19
merge window."
* tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Replace more open-coded allocation size multiplications
Greg Kroah-Hartman [Thu, 11 Oct 2018 10:28:23 +0000 (12:28 +0200)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Ingo writes:
"x86 fixes
An intel_rdt memory access fix and a VLA fix in pgd_alloc()."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Avoid VLA in pgd_alloc()
x86/intel_rdt: Fix out-of-bounds memory access in CBM tests
Greg Kroah-Hartman [Thu, 11 Oct 2018 10:27:47 +0000 (12:27 +0200)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Ingo writes:
"scheduler fix:
Cleanup of dead code left over from the recent sched/numa fixes."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm, sched/numa: Remove remaining traces of NUMA rate-limiting
Greg Kroah-Hartman [Thu, 11 Oct 2018 10:27:03 +0000 (12:27 +0200)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Ingo, a man of few words, writes:
"perf fixes:
misc perf tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf record: Use unmapped IP for inline callchain cursors
perf python: Use -Wno-redundant-decls to build with PYTHON=python3
perf report: Don't try to map ip to invalid map
perf script python: Fix export-to-sqlite.py sample columns
perf script python: Fix export-to-postgresql.py occasional failure
Giacinto Cifelli [Wed, 10 Oct 2018 18:05:53 +0000 (20:05 +0200)]
qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface
Added support for Gemalto's Cinterion ALASxx WWAN interfaces
by adding QMI_FIXED_INTF with Cinterion's VID and PID.
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parthasarathy Bhuvaragan [Wed, 10 Oct 2018 15:50:23 +0000 (17:50 +0200)]
tipc: queue socket protocol error messages into socket receive buffer
In tipc_sk_filter_rcv(), when we detect protocol messages with error we
call tipc_sk_conn_proto_rcv() and let it reset the connection and notify
the socket by calling sk->sk_state_change().
However, tipc_sk_filter_rcv() may have been called from the function
tipc_backlog_rcv(), in which case the socket lock is held and the socket
already awake. This means that the sk_state_change() call is ignored and
the error notification lost. Now the receive queue will remain empty and
the socket sleeps forever.
In this commit, we convert the protocol message into a connection abort
message and enqueue it into the socket's receive queue. By this addition
to the above state change we cover all conditions.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Wed, 10 Oct 2018 15:34:01 +0000 (17:34 +0200)]
tipc: set link tolerance correctly in broadcast link
In the patch referred to below we added link tolerance as an additional
criteria for declaring broadcast transmission "stale" and resetting the
affected links.
However, the 'tolerance' field of the broadcast link is never set, and
remains at zero. This renders the whole commit without the intended
improving effect, but luckily also with no negative effect.
In this commit we add the missing initialization.
Fixes:
a4dc70d46cf1 ("tipc: extend link reset criteria for stale packet retransmission")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Oct 2018 05:44:47 +0000 (22:44 -0700)]
Merge branch 'net-ipv4-fixes-for-PMTU-when-link-MTU-changes'
Sabrina Dubroca says:
====================
net: ipv4: fixes for PMTU when link MTU changes
The first patch adapts the changes that commit
e9fa1495d738 ("ipv6:
Reflect MTU changes on PMTU of exceptions for MTU-less routes") did in
IPv6 to IPv4: lower PMTU when the first hop's MTU drops below it, and
raise PMTU when the first hop was limiting PMTU discovery and its MTU
is increased.
The second patch fixes bugs introduced in commit
d52e5a7e7ca4 ("ipv4:
lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") that
only appear once the first patch is applied.
Selftests for these cases were introduced in net-next commit
e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests")
v2: add cover letter, and fix a few small things in patch 1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 9 Oct 2018 15:48:15 +0000 (17:48 +0200)]
net: ipv4: don't let PMTU updates increase route MTU
When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is
received, we must clamp its value. However, we can receive a PMTU
exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an
increase in PMTU.
To fix this, take the smallest of the old MTU and ip_rt_min_pmtu.
Before this patch, in case of an update, the exception's MTU would
always change. Now, an exception can have only its lock flag updated,
but not the MTU, so we need to add a check on locking to the following
"is this exception getting updated, or close to expiring?" test.
Fixes:
d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 9 Oct 2018 15:48:14 +0000 (17:48 +0200)]
net: ipv4: update fnhe_pmtu when first hop's MTU changes
Since commit
5aad1de5ea2c ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.
As Stefano described in commit
e9fa1495d738 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
- if the local MTU is now lower than the PMTU, that PMTU is now
incorrect
- if the local MTU was the lowest value in the path, and is increased,
we might discover a higher PMTU
Similarly to what commit
e9fa1495d738 did for IPv6, update PMTU in those
cases.
If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.
To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.
Fixes:
5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Rapoport [Tue, 9 Oct 2018 04:02:01 +0000 (07:02 +0300)]
net/ipv6: stop leaking percpu memory in fib6 info
The fib6_info_alloc() function allocates percpu memory to hold per CPU
pointers to rt6_info, but this memory is never freed. Fix it.
Fixes:
a64efe142f5e ("net/ipv6: introduce fib6_info struct and helpers")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Oct 2018 05:27:38 +0000 (22:27 -0700)]
Merge tag 'rxrpc-fixes-
20181008' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix packet reception code
Here are a set of patches that prepares for and fix problems in rxrpc's
package reception code. There serious problems are:
(A) There's a window between binding the socket and setting the data_ready
hook in which packets can find their way into the UDP socket's receive
queues.
(B) The skb_recv_udp() will return an error (and clear the error state) if
there was an error on the Tx side. rxrpc doesn't handle this.
(C) The rxrpc data_ready handler doesn't fully drain the UDP receive
queue.
(D) The rxrpc data_ready handler assumes it is called in a non-reentrant
state.
The second patch fixes (A) - (C); the third patch renders (B) and (C)
non-issues by using the recap_rcv hook instead of data_ready - and the
final patch fixes (D). That last is the most complex.
The preparatory patches are:
(1) Fix some places that are doing things in the wrong net namespace.
(2) Stop taking the rcu read lock as it's held by the IP input routine in
the call chain.
(3) Only end the Tx phase if *we* rotated the final packet out of the Tx
buffer.
(4) Don't assume that the call state won't change after dropping the
call_state lock.
(5) Only take receive window and MTU suze parameters from an ACK packet if
it's the latest ACK packet.
(6) Record connection-level abort information correctly.
(7) Fix a trace line.
And then there are three main patches - note that these are mixed in with
the preparatory patches somewhat:
(1) Fix the setup window (A), skb_recv_udp() error check (B) and packet
drainage (C).
(2) Switch to using the encap_rcv instead of data_ready to cut out the
effects of the UDP read queues and get the packets delivered directly.
(3) Add more locking into the various packet input paths to defend against
re-entrance (D).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ka-Cheong Poon [Mon, 8 Oct 2018 16:17:11 +0000 (09:17 -0700)]
rds: RDS (tcp) hangs on sendto() to unresponding address
In rds_send_mprds_hash(), if the calculated hash value is non-zero and
the MPRDS connections are not yet up, it will wait. But it should not
wait if the send is non-blocking. In this case, it should just use the
base c_path for sending the message.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Thu, 11 Oct 2018 05:18:39 +0000 (07:18 +0200)]
Merge tag 'for-4.19/dm-fixes-4' of git://git./linux/kernel/git/device-mapper/linux-dm
Mike writes:
"device mapper fix for 4.19 final
- Fix for earlier 4.19 final DM linear change that incorrectly
checked for CONFIG_DM_ZONED rather than CONFIG_BLK_DEV_ZONED."
* tag 'for-4.19/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm linear: fix linear_end_io conditional definition
Greg Kroah-Hartman [Thu, 11 Oct 2018 05:17:42 +0000 (07:17 +0200)]
Merge tag 'xfs-fixes-for-4.19-rc7' of git://git./fs/xfs/xfs-linux
Dave writes:
"xfs: fixes for 4.19-rc7
Update for 4.19-rc7 to fix numerous file clone and deduplication issues."
* tag 'xfs-fixes-for-4.19-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix data corruption w/ unaligned reflink ranges
xfs: fix data corruption w/ unaligned dedupe ranges
xfs: update ctime and remove suid before cloning files
xfs: zero posteof blocks when cloning above eof
xfs: refactor clonerange preparation into a separate helper
Damien Le Moal [Thu, 11 Oct 2018 02:45:30 +0000 (11:45 +0900)]
dm linear: fix linear_end_io conditional definition
The dm-linear target is independent of the dm-zoned target. For code
requiring support for zoned block devices, use CONFIG_BLK_DEV_ZONED
instead of CONFIG_DM_ZONED.
While at it, similarly to dm linear, also enable the DM_TARGET_ZONED_HM
feature in dm-flakey only if CONFIG_BLK_DEV_ZONED is defined.
Fixes:
beb9caac211c1 ("dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled")
Fixes:
0be12c1c7fce7 ("dm linear: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Greg Kroah-Hartman [Wed, 10 Oct 2018 20:13:20 +0000 (22:13 +0200)]
Merge tag 'for-4.19/dm-fixes-3' of git://git./linux/kernel/git/device-mapper/linux-dm
Mike writes:
"device mapper fixes for 4.19 final
- Fix a DM cache module init error path bug that doesn't properly
cleanup a KMEM_CACHE if target registration fails.
- Two stable@ fixes for DM zoned target; 4.20 will have changes that
eliminate this code entirely but <= 4.19 needs these changes."
* tag 'for-4.19/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled
dm: fix report zone remapping to account for partition offset
dm cache: destroy migration_cache if cache target registration failed
Greg Kroah-Hartman [Wed, 10 Oct 2018 20:09:44 +0000 (22:09 +0200)]
Merge tag 'trace-v4.19-rc5' of git://git./linux/kernel/git/rostedt/linux-trace
Steven writes:
"vsprint fix:
It was reported that trace_printk() was not reporting properly
values that came after a dereference pointer.
trace_printk() utilizes vbin_printf() and bstr_printf() to keep the
overhead of tracing down. vbin_printf() does not do any conversions
and just stors the string format and the raw arguments into the
buffer. bstr_printf() is used to read the buffer and does the
conversions to complete the printf() output.
This can be troublesome with dereferenced pointers because the
reference may be different from the time vbin_printf() is called to
the time bstr_printf() is called. To fix this, a prior commit changed
vbin_printf() to convert dereferenced pointers into strings and load
the converted string into the buffer. But the change to bstr_printf()
had an off-by-one error and didn't account for the nul character at
the end of the string and this corrupted the rest of the values in
the format that came after a dereferenced pointer."
* tag 'trace-v4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
vsprintf: Fix off-by-one bug in bstr_printf() processing dereferenced pointers