OSDN Git Service
Jakub Pawlowski [Thu, 4 May 2017 20:22:57 +0000 (20:22 +0000)]
Merge "Add supervision timeout workaround for Nexus Remote" into oc-dev
Jakub Pawlowski [Tue, 28 Mar 2017 19:58:34 +0000 (12:58 -0700)]
Add supervision timeout workaround for Nexus Remote
The Nexus Remote would report 100ms supervision timeout in its preferred
connection parameters. In some noisy environments, this might cause
connection to be dropped. As a workaround, set the timeout to 3s for the
remote.
Test: manual
Bug:
36645397
Bug:
37717216
Change-Id: I665a854e9d55067ec1aca273c31d06c6114c48be
(cherry picked from commit
9e6747537a4a2c0143c26ab31e4597a017372e5f)
Pavlin Radoslavov [Thu, 4 May 2017 05:48:28 +0000 (22:48 -0700)]
Remove 96.0 and 88.2 kHz sample rate from A2DP AAC capability
The A2DP AAC Source capabilty should not include 96.0 and 88.2 kHz
sample rate - those were included unintentionally without being tested.
Bug:
37968743
Test: A2DP AAC streaming
Change-Id: Ia3228d4d14d3288acfda42fbaf8ab248ae530b48
(cherry picked from commit
4b93aeb450c4e42a80d8519528dc8fcfacc1d964)
Andy Hung [Mon, 1 May 2017 22:04:57 +0000 (15:04 -0700)]
audio_a2dp_hw: fix fd leak on open
Open hal fds can be checked by
adb shell lsof | grep audio@2. | grep socket | wc
Test: connect and disconnect BT, check open fd.
Bug:
37726871
Change-Id: Id446c43515eceb0828cfb33807a4c0b4c6145a6d
Jacky Cheung [Mon, 17 Apr 2017 20:38:39 +0000 (13:38 -0700)]
Do not GATT_ERROR on MTU change
Bug:
37305498
Test: manual on MSM8909
Change-Id: I07389620efc914d0ece52262edc2c35b498d5564
(cherry picked from commit
f271c9109e5608acb393c9bef0bca9d2b0177f5d)
TreeHugger Robot [Sat, 29 Apr 2017 21:06:54 +0000 (21:06 +0000)]
Merge "Move ad2p back to system." into oc-dev
Jacky Cheung [Sat, 29 Apr 2017 03:55:00 +0000 (03:55 +0000)]
Merge "DO NOT MERGE ANYWHERE Fix LE disconnecting right after pairing" into cw-f-dev am:
b055f8b68a -s ours
am:
f67b6bfa1b -s ours
Change-Id: I94a81ea270037bd5fc7420a52819421125fc5b5b
Jacky Cheung [Sat, 29 Apr 2017 03:52:59 +0000 (03:52 +0000)]
Merge "DO NOT MERGE ANYWHERE Fix LE disconnecting right after pairing" into cw-f-dev
am:
b055f8b68a -s ours
Change-Id: I7b31a9bb0a09d3e7bbb2b666331f4ac47a93efff
Jacky Cheung [Sat, 29 Apr 2017 03:48:18 +0000 (03:48 +0000)]
Merge "DO NOT MERGE ANYWHERE Fix LE disconnecting right after pairing" into cw-f-dev
Jakub Pawlowski [Thu, 27 Apr 2017 11:52:34 +0000 (04:52 -0700)]
DO NOT MERGE ANYWHERE Fix LE disconnecting right after pairing
When a device connect to android over LE, the default policy is to keep
this connection. If any app "claims" this connnection, and then stop
using it, we'll disconnect from the device after a short timeout.
If pairing is triggered to such device, that is connected but not used
by any app, it will cause disconnect after the pairing is finished. This
is because using SMP over fixed LE L2CAP channel is conseidered as
connecting, using, and disconnecting a channel by the stack. This is
obvious logic error - using fixed channels should not require
"connecting" to them.
As a temporary workaround, do not trigger a timeout when a fixed SMP
channel is closed over LE.
For LE only devices, this means they will stay connected after the
pairing until some app starts using them or they disconnect. For dual
mode devices, Classic connection will be established and SDP will be
performed. The classic connection will be disconnected if no app will
use it, and the LE connection to the device will stay up.
Bug:
37352720
Test: manual
Change-Id: Ic9d688aacf84e0267277b12b28dfa7cc57fdcea6
(cherry picked from commit
7c8bab231328956d3b7569280cb162be4e345422)
Steven Moreland [Thu, 27 Apr 2017 21:14:35 +0000 (14:14 -0700)]
Move ad2p back to system.
Test: built to vendor
Fixes:
37681782
Change-Id: I08542090d6b371e3c6de2e65d5c68d0f14c76737
Philip Cuadra [Fri, 28 Apr 2017 01:31:47 +0000 (01:31 +0000)]
Merge "Revert "Make Bluetooth audio threads use RT scheduling"" into oc-dev
Philip Cuadra [Fri, 28 Apr 2017 01:27:09 +0000 (01:27 +0000)]
Revert "Make Bluetooth audio threads use RT scheduling"
This reverts commit
eaa42774f393eb3ccaee91a958e8df6a8fb09b91.
http://b/
37733903
Test: confirmed switching users does not hang.
Change-Id: Ic54e4ed2dda057e681df225a37a574c221cd8fc3
Jakub Pawlowski [Thu, 27 Apr 2017 22:20:37 +0000 (22:20 +0000)]
Merge changes from topic 'bt5-cherry-pickerry-3' into oc-dev
* changes:
Fix LE disconnecting right after pairing
Handle remote not supporting LL_SLAVE_FEATURE_REQ
Expose LE advertiser address for easier PTS tests (4/6)
Read by UUID for PTS tests (4/5)
Jacky Cheung [Wed, 26 Apr 2017 17:27:41 +0000 (10:27 -0700)]
Fix issue with BLE advertising not started when local privacy is not enabled
Bug:
37282500
Test: manual
Change-Id: I44657d0b3315bc241373c8cbaf6a2b6a6e49f31d
Jakub Pawlowski [Thu, 27 Apr 2017 11:52:34 +0000 (04:52 -0700)]
Fix LE disconnecting right after pairing
When a device connect to android over LE, the default policy is to keep
this connection. If any app "claims" this connnection, and then stop
using it, we'll disconnect from the device after a short timeout.
If pairing is triggered to such device, that is connected but not used
by any app, it will cause disconnect after the pairing is finished. This
is because using SMP over fixed LE L2CAP channel is conseidered as
connecting, using, and disconnecting a channel by the stack. This is
obvious logic error - using fixed channels should not require
"connecting" to them.
As a temporary workaround, do not trigger a timeout when a fixed SMP
channel is closed over LE.
For LE only devices, this means they will stay connected after the
pairing until some app starts using them or they disconnect. For dual
mode devices, Classic connection will be established and SDP will be
performed. The classic connection will be disconnected if no app will
use it, and the LE connection to the device will stay up.
Bug:
37352720
Test: manual
Change-Id: Ic9d688aacf84e0267277b12b28dfa7cc57fdcea6
(cherry picked from commit
7c8bab231328956d3b7569280cb162be4e345422)
Jakub Pawlowski [Mon, 24 Apr 2017 13:34:11 +0000 (06:34 -0700)]
Handle remote not supporting LL_SLAVE_FEATURE_REQ
Test: for PTS
Change-Id: I3030a068c1c4980fa7cbb23b478afbe441584869
(cherry picked from commit
341b6db90d67e76ea9262c5e9f3ba5063cb93598)
Jakub Pawlowski [Wed, 19 Apr 2017 14:05:00 +0000 (07:05 -0700)]
Expose LE advertiser address for easier PTS tests (4/6)
This patchset adds a hidden method getOwnAddress, that lets app with
BLUETOOTH_PRIVILEGED permission to lear their own addreess. This is done
exclusively for PTS tests.
Bug:
35147497
Test: manual
Change-Id: I5ad554d872f2b772f2bf91642a9648c4018d935c
(cherry picked from commit
779b4fd786c571cb8013f4d94ddacfe7116fb05f)
Jakub Pawlowski [Fri, 14 Apr 2017 14:27:49 +0000 (07:27 -0700)]
Read by UUID for PTS tests (4/5)
Add a hidden api for reading characteristic by UUID for PTS.
Bug:
35150313
Test: sl4a GattReadTest.byUuid
Change-Id: I072473c5f7b761707774efd89f8a22bfdf012135
(cherry picked from commit
7dd34f52bc950bae2fb1b30b17da0ff34ee016aa)
Philip Cuadra [Thu, 23 Mar 2017 17:10:34 +0000 (10:10 -0700)]
Make Bluetooth audio threads use RT scheduling
Bluetooth threads that are used in audio have deadline
requirements for glitchless playback. Those threads need to be
scheduled as RT tasks to ensure that they can meet the deadline even if
there is high system load.
Bug
37518404
Test: play Bluetooth audio, check for RT with systrace
Merged-In: I4505fbce55e5a4fe18d00dbda23646a60e482efd
Change-Id: I4505fbce55e5a4fe18d00dbda23646a60e482efd
(cherry picked from commit
96c42e70f5c6a74a737739aa9c297cd93540f43e)
TreeHugger Robot [Tue, 25 Apr 2017 17:39:47 +0000 (17:39 +0000)]
Merge "Add missing library dependency when compiling the unit tests" into oc-dev
Pavlin Radoslavov [Tue, 25 Apr 2017 00:37:20 +0000 (17:37 -0700)]
Add missing library dependency when compiling the unit tests
This fixes a compilation issue when compiling with ASAN enabled.
Bug:
37624756
Test: make -j 40 SANITIZE_TARGET='address coverage' tests
Change-Id: I9caa3d404e60ee105435539744ed2b8ccf353700
(cherry picked from commit
044921b223868595a6f96709020b46349b05fa45)
Hemant Gupta [Wed, 12 Apr 2017 18:26:15 +0000 (23:56 +0530)]
AVRCP 1.6: Limit GetFolderItemResponse
Usecase:
1) Connect from AVRCP Controller supporting browsing
having low L2CAP MTU eg 672.
2) Request for get folder items with large request items,
response for which will exceed MTU size.
Expected Result:
As per AVRCP 1.6 Spec, section 29.20 pg 178, response should be
limited to number of completed get folder items that can fit in
single AVCTP Browsing channel MTU even if the completed items
are less than actually requested by AVRCP Controller.
Observation:
DUT responding with Internal Error.
Root Cause:
When there is no space to fill complete Get Folder Item response
within MTU size, DUT was returning error.
Fix:
Send max completed items which can fit in single MTU packet.
Test: Checked if the remote device can receive the truncated
response and get folder items succeeds when remote device
reissues get folder item request with updated start list count.
Frequency: 5/5
Bug:
37304477
Change-Id: I1963f97075382fc8333038e3efffaf61a9d84a28
(cherry picked from commit
a7c7437bbffe133f9192b9ca82b5b4e1f6d9835a)
Stanley Tng [Tue, 18 Apr 2017 05:38:38 +0000 (22:38 -0700)]
Allow the Bluetooth MAC address to be updated asynchronously (3/3)
There are intermittent issues where either the returned Bluetooth
MAC address to Java framework is uninitialized or this address update
arrives too late. This fix will do 2 things:
(1) Returns error when MAC address is unavailable in the native code.
(2) Updates the MAC address later by adding a new broadcast event.
Test: Check address for these cases: factory reset, system reboot, and
Bluetooth re-enable.
Bug:
36709382
Change-Id: I7b1c526ee227897c003ac921078f317f96b92604
(cherry picked from commit
7dc0525365025e17e289869288b1b7d5146306cc)
Zach Johnson [Fri, 21 Apr 2017 21:07:06 +0000 (21:07 +0000)]
Merge "DO NOT MERGE ANYWHERE Allow blocking AG SCO connects by policy" into cw-f-dev am:
b53535d61b -s ours
am:
1238329f28 -s ours
Change-Id: I5995614654f92977a6118ea365f1575e97acfbc1
Zach Johnson [Fri, 21 Apr 2017 21:06:23 +0000 (21:06 +0000)]
DO NOT MERGE ANYWHERE Allow blocking AG SCO connects by policy am:
c61ef79a79 -s ours
am:
31dfa53ba0 -s ours
Change-Id: Ic94d0bb3152b25c3d4c4b4d033c9a80a358727f3
Zach Johnson [Fri, 21 Apr 2017 21:04:06 +0000 (21:04 +0000)]
Merge "DO NOT MERGE ANYWHERE Allow blocking AG SCO connects by policy" into cw-f-dev
am:
b53535d61b -s ours
Change-Id: I2399d1832fe643ef0057c2c4d0b0fa4bf860e760
Zach Johnson [Fri, 21 Apr 2017 21:03:23 +0000 (21:03 +0000)]
DO NOT MERGE ANYWHERE Allow blocking AG SCO connects by policy
am:
c61ef79a79 -s ours
Change-Id: I9704dd064ab5f37ca0ecb310be1cf73826737665
Zach Johnson [Fri, 21 Apr 2017 20:58:11 +0000 (20:58 +0000)]
Merge "DO NOT MERGE ANYWHERE Allow blocking AG SCO connects by policy" into cw-f-dev
Zach Johnson [Wed, 19 Apr 2017 04:03:07 +0000 (21:03 -0700)]
DO NOT MERGE ANYWHERE Allow blocking AG SCO connects by policy
Needed for devices that support both HFP AG and HFP HF.
btsnoop logs show the sequence of events leading to failure:
(corroborated by bt logcat)
1. ACL connection with remote phone established on handle 0x01
2. ACL connection with remote headset established on handle 0x02
3. Incoming call in HF role from phone
4. Phone call locally published to telecom
5. Answer incoming call
6. SCO connection established with phone in HF role
7. AG role with headset picks up on call state change to answered
via BTA_AG_IN_CALL_CONN_RES
8. Inside handler for BTA_AG_IN_CALL_CONN_RES, bta_ag_sco_open called
to establish the SCO connection in the AG role with the headset,
stomping on the previous (wanted) SCO connection with the phone.
Fix is to publish the SCO audio route policy to fluoride, so we can
stop 8 from happening.
Bug:
32958838
Test: manual:
received incoming call in HF role, audio worked both ways;
recieved incoming MT call, headset audio in AG role worked both ways
Change-Id: I12961598e8200bd1d5adb46ee8ec3a802114b80a
TreeHugger Robot [Thu, 20 Apr 2017 01:47:33 +0000 (01:47 +0000)]
Merge "AVRC: Configure absolute volume to false if remove device not support it" into oc-dev
TreeHugger Robot [Thu, 20 Apr 2017 00:07:09 +0000 (00:07 +0000)]
Merge "Add default AVRCP version to prevent confusing log message" into oc-dev
Tsuyoshi Kamata [Tue, 7 Mar 2017 06:46:34 +0000 (15:46 +0900)]
AVRC: Configure absolute volume to false if remove device not support it
Some AVRCP(ver>1.4) devices don't support absolute volume, when connected
to such device, volume control doesn't work properly on phone.
This patch fix the problem as bellow:
- check category of remote device
when add absolute volume feature flag.
- remove absolute volume feature flag
if remote device responses REJECT or NOT_IMPLEMENT.
Bug:
33441894
Test: manual
Change-Id: Icfd6f61699490efd937fa6d2383f333eb0f0144a
(cherry picked from commit
a4fcd238aedee87384fa164e9465302aa4b69035)
TreeHugger Robot [Wed, 19 Apr 2017 22:40:13 +0000 (22:40 +0000)]
Merge "test_vendor: Remove unused libbt-vendor files" into oc-dev
Ajay Panicker [Fri, 31 Mar 2017 16:53:12 +0000 (09:53 -0700)]
Add default AVRCP version to prevent confusing log message
Bug:
37509042
Test: Log message shows more info
Change-Id: Ic042d1cf1489e391fe6e9cc3d6239acb79917b01
Jacky Cheung [Wed, 19 Apr 2017 21:40:33 +0000 (21:40 +0000)]
Do not GATT_ERROR on MTU change am:
a365626943
am:
f21c3dede7 -s ours
Change-Id: I34f636613c211a859da4e2a095e02ca801944b61
Jacky Cheung [Wed, 19 Apr 2017 21:35:03 +0000 (21:35 +0000)]
Do not GATT_ERROR on MTU change
am:
a365626943
Change-Id: I956c4ca2e31d5c98e986738be0890c17e21b1186
Hemant Gupta [Thu, 13 Apr 2017 14:34:36 +0000 (20:04 +0530)]
AVRCP TG: Get Item Attribute command not working
Usecase:
1) Connect from carkit supporting AVRCP 1.4/1.5 CT to DUT
2) Issue get item attribute command with valid attribute list.
Expected behaviour:
Get item attribute command succeeds and returns the requested
attributes of particular item
Observed result:
Get Item attribute command fails with BAD Param Error
Root Cause:
Wrong structure from tAVRC_COMMAND was being passed to fill_attribute_id_array
which was leading to error being returned.
Fix:
Use get_attrs of type tAVRC_GET_ATTRS_CMD instead of get_elem_attrs of type
tAVRC_GET_ELEM_ATTRS_CMD when remote device requests for get item attributes.
Test: Checked that now bad param error is not returned in response for
get item attribute command from remote device.
Bug:
37302234
Bug:
36055995
Change-Id: I9245f726f37ffd666d143d2232dac868a2cc3268
(cherry picked from commit
6510a471696f24a051b79ca9fd7a210bf7e293bc)
Myles Watson [Mon, 17 Apr 2017 20:43:05 +0000 (13:43 -0700)]
test_vendor: Remove unused libbt-vendor files
Bug:
36810308
Test: builds
Change-Id: I50b4a3efaac622959dbf25c0f854d455057e6f3e
(cherry picked from commit
10b43d2fa0f408dbe465febb27aace0e111b01ff)
Myles Watson [Tue, 7 Mar 2017 12:57:03 +0000 (04:57 -0800)]
Remove libbt-vendor from system/bt/main/Android.bp
Platforms that need libbt-vendor, which is deprecated, should include the
build dependency in device.mk.
Bug:
36810308
Test: Angler Bluetooth starts/stops
Change-Id: I0e37bf48536ca134493aaa3a496bafb3b80cd882
Pavlin Radoslavov [Wed, 19 Apr 2017 17:50:16 +0000 (10:50 -0700)]
Print the LDAC adaptive bit rate adjustments
A2DP LDAC State:
...
LDAC quality mode : ABR
LDAC transmission bitrate (Kbps) : 990
LDAC saved transmit queue length : 0
LDAC adaptive bit rate encode quality mode index : 0
LDAC adaptive bit rate adjustments : 4
Test: A2DP streaming to headsets that support LDAC
Bug:
37287785
Change-Id: Ife8017ca129fa9b06ea85f6029c553a52a306cc2
(cherry picked from commit
a825f565504fa17d5458c57092f4c0ec0e539128)
Pavlin Radoslavov [Wed, 19 Apr 2017 03:05:39 +0000 (20:05 -0700)]
Fix/update the computation of the total dropped packets for LDAC and AAC
Also:
* Print the "LDAC transmission bitrate (Kbps)"
* Print the "LDAC adaptive bit rate encode quality mode index"
when the LDAC quality mode is ABR
A2DP LDAC State:
...
LDAC quality mode : ABR
LDAC transmission bitrate (Kbps) : 990
LDAC saved transmit queue length : 0
LDAC adaptive bit rate encode quality mode index : 0
Test: A2DP streaming to headsets that support LDAC
Bug:
37287785
Change-Id: I83b22090b087eb8a1e49d1853468b7dbbf9d9ad3
(cherry picked from commit
648ea508c95ade2d8cb8b2928c70ae123fab8334)
Hemant Gupta [Fri, 14 Apr 2017 06:37:37 +0000 (12:07 +0530)]
stack: AVRCP: add missing debug arguments
Fixes a crash while sending AVRCP Get Item Attribute response due to missing
function arguments.
Test: test with BMW kit, Crysler kit which trigger this bug
Bug:
37334553
Fixes:
37474772
Change-Id: Ie129e22e427896028a50e6b0ae8c2cdd151b0ea1
(cherry picked from commit
2dc048b0ed2684d8e538f0eaf67cd2b7ea79ce96)
TreeHugger Robot [Tue, 18 Apr 2017 13:42:18 +0000 (13:42 +0000)]
Merge "AVRCP CT: Only call handle_rc_features if target registered" into oc-dev
Pavlin Radoslavov [Fri, 14 Apr 2017 10:45:18 +0000 (03:45 -0700)]
Add missing NULL pointer assignment after fixed_queue_free and alarm_free
Bug:
37285767
Test: Code compilation
Change-Id: I53f759ea477079b0b6aed4bcbeefb645886263d6
(cherry picked from commit
86ae6c0200347fb5734491555be4a4d59eaabfea)
Bailey Forrest [Fri, 31 Mar 2017 04:43:28 +0000 (21:43 -0700)]
AVRCP CT: Only call handle_rc_features if target registered
If target is not registered, handle_rc_features would clear feature
flags before handle_rc_ctrl_features can use them.
Bug: b/
35807779
Test: AVRCP controller track info works on iOS.
Change-Id: Iee781f2fc926a053ba9cf30089d3a49e56b94539
(cherry picked from commit
7745e29576703a84f4a6b47f13b3cec068033e28)
Sanket Agarwal [Wed, 22 Feb 2017 19:55:34 +0000 (11:55 -0800)]
BTA HF_CLIENT: Always reply to +BCS
Phones don't like when we don't reply to +BCS codec-negotiation. We were
having this behavior because not always do we want to accept a
connection request over SCO. Instead of not replying to +BCS (which is
essentially a codec negotiation) we rather refuse the SCO request when
it comes in. This creates other issues such as some phones trying to
connect SCO in an infinite loop but it still keeps interoperability with
other devices such as iPhones and Microsoft phones intact
Bug: b/
35469963
Bug: b/
35431871
Bug: b/
35419773
Test: SCO (Phone Audio) test with iPhone, Microsoft and Nexus phones
Change-Id: I5319edcb4da9d66c6d6b3a49742248c90dee98e6
(cherry picked from commit
ad372cfa3376f882046284a5655ed9c6fdf24daf)
Jacky Cheung [Fri, 14 Apr 2017 20:49:23 +0000 (13:49 -0700)]
Do not GATT_ERROR on MTU change
Bug:
37305498
Test: manual on MSM8909
Change-Id: Iabec87375da1e8cd05356a7be490a66205d24e78
Pavlin Radoslavov [Thu, 13 Apr 2017 21:33:30 +0000 (14:33 -0700)]
Fix a race condition during HCI module shutdown
If an HCI event (e.g., incoming event) happens during
HCI module shutdown, and the processing of that event
calls update_command_response_timer() right after
"alarm_free(command_response_timer)" in the beginning
of hci_module_shut_down(), then update_command_response_timer()
will try to schedule an alarm on command_response_timer that is NULL.
Test: Enable/disable Bluetooth, added unit tests
Bug:
37241256
Change-Id: I7fd58446caedc135e906953644201f88b5df32bb
(cherry picked from commit
a3292051d9c088769b0f4e46ffaf7c66b1127194)
Andre Eisenbach [Thu, 13 Apr 2017 21:49:36 +0000 (14:49 -0700)]
Do not remove device security record on LMP timeout
If an LMP timeout is encountered in the middle of authentication, the
link key is removed from the controller (but not from NVRAM). This can
result in a follow up connction triggering a LINK_KEY_MISSING reply,
which in turn can cause a remote device to initiate pairing which will
then finally remove the link key stored in NVRAM as well.
This change prevents the link key from being removed from the Bluetooth
controller in case of a timeout during link authentication.
Bug:
36798442
Test: manual
Change-Id: Ic89a16b45756e3d40b2e374c645c8f245f6ce3fc
(cherry picked from commit
1f5ec7304fc4e297f9f9868b5bd9382c2a26c8cc)
TreeHugger Robot [Fri, 14 Apr 2017 02:45:48 +0000 (02:45 +0000)]
Merge "Move audio.a2dp.default to vendor" into oc-dev
TreeHugger Robot [Thu, 13 Apr 2017 20:05:37 +0000 (20:05 +0000)]
Merge "HFP: Disable BTRH feature" into oc-dev
Po-Chien Hsueh [Tue, 7 Mar 2017 02:27:21 +0000 (10:27 +0800)]
Move audio.a2dp.default to vendor
Default HAL should go to /vendor/.
Bug:
35907904
Bug:
35979581
Test: Compiled and checked install path. Verified on Sailfish with
$ lsof | grep default. MP3 playback over my BT headset.
Change-Id: I93a341cc96b8d991dea52070f633566bf71f0dc0
Yoshiharu Kurita [Wed, 25 Nov 2015 09:00:30 +0000 (18:00 +0900)]
HFP: Disable BTRH feature
Fluoride does not notify application layer upon AT+BTRH, and always
sends error response (BTRH is not supported) to remote device.
That is, Fluoride does not support BTRH feature.
But BTRH is enabled by default, so OK is sent to remote device by mistake
before the error response is sent. This makes some carkits unstable.
Bug:
29587048
Test: make, PTS test
Change-Id: If1aa32291491982851ecd480c4ba8390f39a27a2
Merged-In: If1aa32291491982851ecd480c4ba8390f39a27a2
(cherry picked from commit
a25ef0b60b4ca10385dac02334dc3e4e2ad23edb)
Jack He [Fri, 3 Feb 2017 01:42:40 +0000 (17:42 -0800)]
Add support for inband ringing feature
* Change HFP init API so that the HFP feature bit field depends on
whether in-band ringing is supported on the device
* Feature disabled by default unless system property enables it
Bug:
19171297
Test: mm -j 40, HFP regression test, testplans/82144
Change-Id: Ib8ba28ac6e70eb23b2a2ad11c5805793911a4e43
(cherry picked from commit
7a9892c63bad8f8d93681fb74d5532a79387b60e)
Pavlin Radoslavov [Wed, 5 Apr 2017 23:38:42 +0000 (16:38 -0700)]
Reduce the audio A2DP HAL output audio stream buffer size
Reduce the audio A2DP HAL output audio stream buffer size
(per constant AUDIO_STREAM_OUTPUT_BUFFER_PERIODS) from 4 to 2.
After the change, the output buffer size is double the buffer period.
Bug:
35849921
Test: A2DP streaming with various codec settings. Testplans/83305.
Change-Id: I2a15d468e748a03b481bf2117903ab06cddd02a3
(cherry picked from commit
5e9f56940e1865d16892639e4c9144a65547626e)
Jack He [Tue, 11 Apr 2017 22:49:06 +0000 (22:49 +0000)]
Check LE advertising data length before caching advertising records am:
1bef3546a6 am:
e6620d18cf am:
585e0c08f5 am:
005eb1d305 am:
7752061901 am:
0ddb124e6e am:
2feb43b5b1 am:
72270d976b
am:
e0702cd5b8 -s ours
Change-Id: I3157998e2357ece35235b6636d9ab45bcc60ef60
Jack He [Tue, 11 Apr 2017 22:38:39 +0000 (22:38 +0000)]
Check LE advertising data length before caching advertising records am:
1bef3546a6 am:
e6620d18cf am:
585e0c08f5 am:
005eb1d305 am:
7752061901 am:
0ddb124e6e am:
2feb43b5b1
am:
72270d976b
Change-Id: I6dbf93e14a6c31092d2ecce2738b7680b738220c
Jack He [Tue, 11 Apr 2017 22:33:09 +0000 (22:33 +0000)]
Check LE advertising data length before caching advertising records am:
1bef3546a6 am:
e6620d18cf am:
585e0c08f5 am:
005eb1d305 am:
7752061901 am:
0ddb124e6e
am:
2feb43b5b1
Change-Id: I3d16a2939976a326ca20056b29818e2df550ee67
Jack He [Tue, 11 Apr 2017 22:28:08 +0000 (22:28 +0000)]
Check LE advertising data length before caching advertising records am:
1bef3546a6 am:
e6620d18cf am:
585e0c08f5 am:
005eb1d305 am:
7752061901
am:
0ddb124e6e
Change-Id: I61b9f5741d5fd6035fb7d472b83dc9df54eb3483
Jack He [Tue, 11 Apr 2017 22:23:08 +0000 (22:23 +0000)]
Check LE advertising data length before caching advertising records am:
1bef3546a6 am:
e6620d18cf am:
585e0c08f5 am:
005eb1d305
am:
7752061901
Change-Id: I1f821df2a72958ed17ce5bf8baed431a52dfb087
Jack He [Tue, 11 Apr 2017 22:18:07 +0000 (22:18 +0000)]
Check LE advertising data length before caching advertising records am:
1bef3546a6 am:
e6620d18cf am:
585e0c08f5
am:
005eb1d305
Change-Id: Ic4f826e4f963f969c360fe39c6e720c3fb013d23
Jack He [Tue, 11 Apr 2017 22:13:06 +0000 (22:13 +0000)]
Check LE advertising data length before caching advertising records am:
1bef3546a6 am:
e6620d18cf
am:
585e0c08f5
Change-Id: If70a5f9b56845e758c2a2a3150936a72cac9f438
Jack He [Tue, 11 Apr 2017 22:08:06 +0000 (22:08 +0000)]
Check LE advertising data length before caching advertising records am:
1bef3546a6
am:
e6620d18cf
Change-Id: I412c0dd7854d7f6157e1974e285078909543bb41
Jack He [Tue, 11 Apr 2017 22:03:05 +0000 (22:03 +0000)]
Check LE advertising data length before caching advertising records
am:
1bef3546a6
Change-Id: Ibbf6183833d7f00937742fa337a04569c4ef3c2f
Jack He [Thu, 6 Apr 2017 00:59:58 +0000 (17:59 -0700)]
Check LE advertising data length before caching advertising records
Bug:
33899337
Test: make, receive LE advertising
Change-Id: I06b249ac5cabdef64528deda07b8bae749e1d2fd
(cherry picked from commit
d57adbc350fdee4f27b82c9e39a14bd745d92320)
Jakub Pawlowski [Mon, 10 Apr 2017 20:00:27 +0000 (13:00 -0700)]
Build fix for BLE_PRIVACY_SPT == FALSE
Bug:
30622771
Test: manual
Change-Id: I9a418b8c0477ac50ec2a81e318895c2788e5ceec
(cherry picked from commit
b0aca861fee4f0fbab809b5a1ef75c31d10055bd)
Jakub Pawlowski [Tue, 4 Apr 2017 11:08:19 +0000 (04:08 -0700)]
Advertising manager improvements
* Keep track wether advertiser is enabled.
* Make sure that random address for connectable advertisers is updated
when advertising is disabled, as per ESR11-E7716.
* Make sure that the local variable holding the address is properly
updated after the address is pushed to the controller.
* Use "LE Remove Advertising Set" command to free advertiser after use.
Bug:
35935853
Bug:
30622771
Test: manual
Change-Id: I1415f7272dd99e5e81ce1e2b7ef2bf98f7229cf9
(cherry picked from commit
1f62c122e908573497a8c69ccd7bd829ce02a0b9)
Jakub Pawlowski [Mon, 10 Apr 2017 09:19:29 +0000 (02:19 -0700)]
Linux build fix
Test: manual
Change-Id: I5c86e96b9bb1cee5b535ea1fa6ba0b6d078a9b09
(cherry picked from commit
17f449dab52a6092422a0405e6fe589488661594)
Jakub Pawlowski [Fri, 7 Apr 2017 13:19:50 +0000 (06:19 -0700)]
Use device privacy mode as default
This change configures device privacy mode for each
remote device added to the resolving list.
Before exercising the privacy command it confirms
whether the set privacy HCI command is supported.
This patch is based on CAF patch by niarora@codeaurora.org
36fa3c528d2ae58e0b3f969665e3d25986dcdbaa
Test: manual
Bug:
35935853
Change-Id: I839045ccc3ddb73dc9c0cbe05d87c25dae9b9236
(cherry picked from commit
f6db7cb9a30b34493df8658d59b2fe2232bc828a)
Jakub Pawlowski [Fri, 7 Apr 2017 12:50:16 +0000 (05:50 -0700)]
ESR11-E7716: Disable scans while setting local RPA
This change is required to disable any ongoing classic
advertisement or any scan before setting the RPA for the
DUT, and reenable them after the Set RPA command.
If a direct connection is ongoing, the RPA is not set.
A background connection is suspended and resumed for
sending the "Set RPA" HCI command.
This patch is based on CAF patch by niarora@codeaurora.org
690c2db21f650f74c202fd380cca4ca74cbdf83c
Test: manual
Bug:
35935853
Change-Id: Ifbc90d0c52c8f1fa627ac80c20a69149e89cb794
(cherry picked from commit
6bd467a004f4416aafc7fbd4da19b1e54578fd18)
Jakub Pawlowski [Mon, 20 Mar 2017 22:38:56 +0000 (15:38 -0700)]
Support for H7 function for key derivation
This change sets bit 5 of the auth req to 1 to display
the support for H7 function, for key derivation.
Also, it adds the implementation of the h7 function as
defined in the spec (ERRATA E7301]
H7 is used if both host and remote devices exhibit
their support for H7 function in the auth request,
else the key derivation falls back to the H6
implementation.
The method is similar for derivation from either
transports with the only difference being in the first
byte of the SAL used in h7.
This patch is based on CAF patch by niarora@codeaurora.org
70668ad34ff15d0a53aea612d3c488fa575176ca
Test: manual
Bug:
35935853
Change-Id: I2fa29b2f3d2b3ac007b2f5f024871f81220237d8
(cherry picked from commit
e7f14a682d57811d9df0d64372f222bcc143ec86)
Pavlin Radoslavov [Thu, 6 Apr 2017 22:13:16 +0000 (15:13 -0700)]
Add A2DP codec-specific information to dumpsys output
Now we print the following information:
* Current codec name
* Info for each supported codec:
- Priority
- Encoder interval (ms)
- Codec Config: Sampling rate, Bits per sample, Channel mode (MONO/STEREO)
- Selectable codec configuration
- Codec's local capability
- Packet counts (expected/dropped)
- PCM read counts (expected/actual)
- PCM read bytes (expected/actual)
* LDAC codec-specific info:
- LDAC quality mode: HIGH/MID/LOW/ABR
- LDAC saved transmit queue length [used in ABR mode]
* SBC codec-specific info:
- Frames counts (expected/dropped)
Sample of the new format is below:
---
A2DP Codecs State:
Current Codec: LDAC
A2DP LDAC State:
Priority:
1000000
Encoder interval (ms): 20
Config: Rate=96000 Bits=32 Mode=STEREO
Selectable: Rate=44100|48000|88200|96000 Bits=16|24|32 Mode=MONO|STEREO
Local capability: Rate=44100|48000|88200|96000 Bits=16|24|32 Mode=MONO|STEREO
Packet counts (expected/dropped) : 596 / 161
PCM read counts (expected/actual) : 2488 / 2488
PCM read bytes (expected/actual) :
2547712 /
2547712
LDAC quality mode : ABR
LDAC saved transmit queue length : 0
A2DP aptX-HD State:
Priority: 4001
Encoder interval (ms): 0
Config: Invalid
Selectable: Invalid
Local capability: Rate=44100|48000 Bits=24 Mode=STEREO
Packet counts (expected/dropped) : 0 / 0
PCM read counts (expected/actual) : 0 / 0
PCM read bytes (expected/actual) : 0 / 0
A2DP aptX State:
Priority: 3001
Encoder interval (ms): 0
Config: Rate=44100 Bits=16 Mode=STEREO
Selectable: Rate=44100|48000 Bits=16 Mode=STEREO
Local capability: Rate=44100|48000 Bits=16 Mode=STEREO
Packet counts (expected/dropped) : 0 / 0
PCM read counts (expected/actual) : 0 / 0
PCM read bytes (expected/actual) : 0 / 0
A2DP AAC State:
Priority: 2001
Encoder interval (ms): 20
Config: Rate=44100 Bits=16 Mode=STEREO
Selectable: Rate=44100|48000 Bits=16 Mode=STEREO
Local capability: Rate=44100|48000|88200|96000 Bits=16 Mode=STEREO
Packet counts (expected/dropped) : 0 / 0
PCM read counts (expected/actual) : 0 / 0
PCM read bytes (expected/actual) : 0 / 0
A2DP SBC State:
Priority: 1001
Encoder interval (ms): 20
Config: Rate=44100 Bits=16 Mode=STEREO
Selectable: Rate=44100 Bits=16 Mode=STEREO
Local capability: Rate=44100 Bits=16 Mode=STEREO
Packet counts (expected/dropped) : 580 / 0
PCM read counts (expected/actual) : 2900 / 2900
PCM read bytes (expected/actual) :
1484800 /
1484800
Frames counts (expected/dropped) : 3724 / 0
---
Bug:
36567128
Test: Stream A2DP and "adb shell dumpsys bluetooth_manager"
Change-Id: Idd86005b842a4e569b7df91b8bbaf0632ed7f7c9
(cherry picked from commit
302113d4e44f06e90f90a5903e33ae830edb58a3)
Pavlin Radoslavov [Wed, 5 Apr 2017 23:18:26 +0000 (16:18 -0700)]
Create unit test framework for audio_a2dp_hw
Create unit test framework for audio_a2dp_hw and implement a unit test
for function audio_a2dp_hw_stream_compute_buffer_size()
Also:
* Remove obsolete check for mixer unit size inside out_get_buffer_size()
* Reorganize the file structure inside directory audio_a2dp_hw/ :
- Moved the source code files *.cc to audio_a2dp_hw/src/
- Moved the header file(s) *.h to audio_a2dp_hw/include/
- The unit test file(s) are stored in audio_a2dp_hw/test/
Bug:
35849921
Test: This is the unit test. Code compilation and unit test succeed
Change-Id: I3dcc508cb6799462b7103cb2ee452b4399843899
(cherry picked from commit
304ceeb5202060a9c625a55369cbf28d72f5e2d9)
Jacky Cheung [Fri, 7 Apr 2017 23:57:19 +0000 (23:57 +0000)]
DO NOT MERGE ANYWHERE Mark AutoConnParamUpdateAddr on first auto connection param update am:
dd467f108f -s ours
am:
1386ae5d92 -s ours
Change-Id: Ieea4194c4ea69e72f92a21dbd08eff94d390a02d
Jacky Cheung [Fri, 7 Apr 2017 23:53:48 +0000 (23:53 +0000)]
DO NOT MERGE ANYWHERE Mark AutoConnParamUpdateAddr on first auto connection param update
am:
dd467f108f -s ours
Change-Id: Iae88352c83d7f3b1430c02e2af3a683bebae3bb2
Jakub Pawlowski [Thu, 6 Apr 2017 13:59:20 +0000 (06:59 -0700)]
Fix "LE Read Maximum Advertising Data Length" response parsing
The value is uint16_t, not uint8_t
Bug:
30622771
Test: manual
Change-Id: I93e8687fa74cb0f5877f9921a860b2ba83106691
(cherry picked from commit
16899e9d1ef49aedba8435ff3a5e4476f036427a)
Myles Watson [Tue, 7 Mar 2017 13:00:04 +0000 (05:00 -0800)]
Finish conversion to Android.bp
Bug:
35651902,
35672576,
36810308
Test: build, Android Cloud Bluetooth net_test_bluetooth
Change-Id: Ie99966d610ea35ab8caf8a084d92c43618e90b94
TreeHugger Robot [Wed, 5 Apr 2017 17:51:07 +0000 (17:51 +0000)]
Merge "test: Add a simulated Bluetooth HAL implementation" into oc-dev
Myles Watson [Tue, 7 Mar 2017 12:28:51 +0000 (04:28 -0800)]
test: Add a simulated Bluetooth HAL implementation
Bug:
35672576
Test: Angler Bluetooth starts/stops with test HAL
Android Cloud net_test_bluetooth tests pass
Change-Id: I104e0dd3946f0efff9709e05c056bee3538394f7
Pavlin Radoslavov [Tue, 4 Apr 2017 18:31:29 +0000 (11:31 -0700)]
Compute the audio data buffer size based on stream characteristics
Use the audio data stream characteristics (sample rate, bits per sample,
channel mode) to compute the audio stream output buffer size from
the Audio A2DP HAL to the Bluetooth stack.
Previously, the buffer size was pre-computed based on the original
(44.1kHz, 16 bits per sample, Stereo) PCM audio stream used by SBC.
NOTE: We cannot change the buffer size on the receiver side (Bluetooth),
because SO_RCVBUF option does not have effect for Domain Sockets.
Also, removed uipc_linux.h header file, because it is not used.
Test: A2DP streaming and switching the codecs, sample rate, bits per sample
Bug:
35849921
Change-Id: Ib6772f7564442ac18a02876a5aa5e3208e5aade1
(cherry picked from commit
b32704f424e0ab4cd33ad670173997f8e3a0a31c)
Jorge E. Moreira [Mon, 27 Mar 2017 22:44:55 +0000 (15:44 -0700)]
test-vendor-lib: Enable building for 64 bits
Removes LOCAL_MODULE_PATH which is not supported for 64 bit builds.
Uses LOCAL_PROPRIETARY_MODULE to let the build system know it should
go in the vendor directory.
Test: builds
Change-Id: Iba55d497d8cbe97911a41a5623248306a8954ec2
(cherry picked from commit
77c6bc5886da34011fc6b6bfcc15cf19dc4b5b68)
Andy Hung [Thu, 30 Mar 2017 23:28:46 +0000 (16:28 -0700)]
audio_a2dp_hw: add device lock
Prevent conflict between closing a stream (adev_close_output_stream)
and setting parameters (adev_set_parameters).
Test: Manual - Bluetooth A2DP streaming and changing codec parameters
Bug:
36723276
Change-Id: Id8b9fcdf594e3d5fde139719d324420468c4c0aa
Jakub Pawlowski [Fri, 31 Mar 2017 03:41:02 +0000 (20:41 -0700)]
Bluetooth 5 advertising duration refactoring (1/4)
Expose both duration and maximum extended advertising events to limit
advertising time.
Test: manual
Bug:
30622771
Change-Id: I4475c322347899946b39e65026d8009e02c93759
(cherry picked from commit
5204c62f137de9b6c2834391fd329457d3fdbc84)
Jakub Pawlowski [Thu, 30 Mar 2017 18:52:53 +0000 (11:52 -0700)]
Include flags in all connectable packets
According to Bluetooth CSSv7, the flags field shall be included in all
connectable packets, not only legacy packets.
Test: manal
Bug:
30622771
Change-Id: I006f9bd6d31ca0673d78405f320b18623e6e5b16
(cherry picked from commit
9389b64629776238e6ee69b1f37bdec97187e75e)
Jakub Pawlowski [Wed, 29 Mar 2017 21:28:43 +0000 (14:28 -0700)]
Bluetooth 5 periodic scan (2/3)
This patch wires calls/callbacks through stack to prepare for actual
implementation.
Test: manual
Bug:
30622771
Change-Id: Iac8c74a228f34f5ea4231a76848e22ea64f11d06
(cherry picked from commit
f685bfb7b1f6da17165a33590b18f559476e670f)
Ajay Panicker [Thu, 30 Mar 2017 17:33:19 +0000 (10:33 -0700)]
Delete bt_snoop.log when snoop logging is disabled
This patch will immediatly delete the snoop log if Bluetooth is on. If Bluetooth
is off it will delete the log as soon as Bluetooth starts again.
Test: Turn off logging while Bluetooth is on and off
Bug:
36718948
Change-Id: Ib660cd442c93f1a34c948d51c5cffc38695558d5
TreeHugger Robot [Thu, 30 Mar 2017 02:40:54 +0000 (02:40 +0000)]
Merge "l2cap: Use CHECK for memory allocation errors" into oc-dev
TreeHugger Robot [Thu, 30 Mar 2017 01:39:52 +0000 (01:39 +0000)]
Merge "osi: Update error messages" into oc-dev
TreeHugger Robot [Thu, 30 Mar 2017 01:36:05 +0000 (01:36 +0000)]
Merge "hci: Update error messages" into oc-dev
Myles Watson [Tue, 21 Mar 2017 17:28:20 +0000 (10:28 -0700)]
osi: Update error messages
Test: build
Change-Id: I5af34f01c47d8037d56c27e7e3fab3cc2f5fd2bc
(cherry picked from commit
1dc4b361ddc16ec8d917b052c8a3d9bdb28bbd1c)
Myles Watson [Tue, 21 Mar 2017 17:16:44 +0000 (10:16 -0700)]
l2cap: Use CHECK for memory allocation errors
Test: LE connection
Change-Id: I43c170b40b125345b91e1c91a7993f0d138ac1c5
(cherry picked from commit
1d418ba650480d99cdf10ee814b6224de4ee88ce)
Myles Watson [Tue, 21 Mar 2017 17:21:15 +0000 (10:21 -0700)]
hci: Update error messages
Test: builds
Change-Id: I33544572122a166523a40dde090f276b102df247
(cherry picked from commit
ec728d3136aabcd7675aba4a672d932e0709c509)
Pavlin Radoslavov [Fri, 24 Feb 2017 18:35:30 +0000 (10:35 -0800)]
Add new internal API: enableOptionalCodecs()/disableOptionalCodecs()
This API can be used to enable the optional codecs, or disable them
and use only the mandatory SBC.
Internally, it is implemented by raising the SBC priority to
highest (so SBC will be used/selected), or reducing the SBC priority
to its default value (lowest).
Test: A2DP streaming and enabling/disabling/selecting optional codecs
Bug:
35873828
Change-Id: Ia1311d790441b7b5471c9fda7aeee8aa3306b16e
(cherry picked from commit
2073c3eb61f69864e645c50005f11c4e8b5e2588)
Pavlin Radoslavov [Wed, 29 Mar 2017 01:40:32 +0000 (18:40 -0700)]
Add missing dependency on the Sony LDAC ABR library libldacBT_abr.so
Test: Code compilation
Bug:
35381097
Change-Id: Ib347319942aef4fef6bfd7edc23a4df004fc19fa
(cherry picked from commit
e4f2b615678ccb1fe7e13da4f166c9a45fd16136)
fen wang [Tue, 28 Mar 2017 05:20:02 +0000 (05:20 +0000)]
Integration of LDAC Adaptive Bit Rate mechanism am:
dfc02a91a1 am:
2bbd84b0e3
am:
66d7309640
Change-Id: I53f5b3af71ff05c24c40e428665dde981712df7a
fen wang [Tue, 28 Mar 2017 05:11:49 +0000 (05:11 +0000)]
Integration of LDAC Adaptive Bit Rate mechanism am:
dfc02a91a1
am:
2bbd84b0e3
Change-Id: Iae3bb76449af74af89a37be6ef4445fc828996f7
fen wang [Tue, 28 Mar 2017 05:03:51 +0000 (05:03 +0000)]
Integration of LDAC Adaptive Bit Rate mechanism
am:
dfc02a91a1
Change-Id: I5a82550e3f70768063f811c64b7d68e4a85e7ce6
fen wang [Wed, 15 Mar 2017 05:52:52 +0000 (14:52 +0900)]
Integration of LDAC Adaptive Bit Rate mechanism
LDAC ABR controls LDAC encoder bit rate based on A2DP transmit queue
length.
It can be used if the LDAC ABR library is installed on the device:
libldacBT_abr.so
Test: manual
Bug:
35381097
Change-Id: Idcc2fabe86acaf441f5a71f5d2bb66ad29252cdb
Jakub Pawlowski [Mon, 27 Mar 2017 20:54:21 +0000 (20:54 +0000)]
Add option to specify initial LE connection PHY (1/3) am:
96fb273d92 am:
f0b97cad96
am:
4ee5145383
Change-Id: I49a3c0d17f3987cbff52ddbdbbfd7fab4a8ecaea