mm, vmscan: consider eligible zones in get_scan_count

commit 71ab6cfe88dcf9f6e6a65eb85cf2bda20a257682 upstream.

get_scan_count() considers the whole node LRU size when

 - doing SCAN_FILE due to many page cache inactive pages
 - calculating the number of pages to scan

In both cases this might lead to unexpected behavior especially on 32b
systems where we can expect lowmem memory pressure very often.

A large highmem zone can easily distort SCAN_FILE heuristic because
there might be only few file pages from the eligible zones on the node
lru and we would still enforce file lru scanning which can lead to
trashing while we could still scan anonymous pages.

The later use of lruvec_lru_size can be problematic as well.  Especially
when there are not many pages from the eligible zones.  We would have to
skip over many pages to find anything to reclaim but shrink_node_memcg
would only reduce the remaining number to scan by SWAP_CLUSTER_MAX at
maximum.  Therefore we can end up going over a large LRU many times
without actually having chance to reclaim much if anything at all.  The
closer we are out of memory on lowmem zone the worse the problem will
be.

Fix this by filtering out all the ineligible zones when calculating the
lru size for both paths and consider only sc->reclaim_idx zones.

The patch would need to be tweaked a bit to apply to 4.10 and older but
I will do that as soon as it hits the Linus tree in the next merge
window.

Link: http://lkml.kernel.org/r/20170117103702.28542-3-mhocko@kernel.org
Fixes: b2e18757f2c9 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: Trevor Cordes <trevor@tecnopolis.ca>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, vmscan: cleanup lru size claculations

commit fd538803731e50367b7c59ce4ad3454426a3d671 upstream.

lruvec_lru_size returns the full size of the LRU list while we sometimes
need a value reduced only to eligible zones (e.g.  for lowmem requests).
inactive_list_is_low is one such user.  Later patches will add more of
them.  Add a new parameter to lruvec_lru_size and allow it filter out
zones which are not eligible for the given context.

Link: http://lkml.kernel.org/r/20170117103702.28542-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm balloon: umount balloon_mnt when removing vb device

commit 9c57b5808c625f4fc93da330b932647eaff321f7 upstream.

With CONFIG_BALLOON_COMPACTION=y the kernel will mount balloon_mnt for
balloon page migration when we probe a virtio_balloon device.  However
we do not unmount it when removing the device.  Fix this.

Fixes: b1123ea6d3b3 ("mm: balloon: use general non-lru movable page feature")
Link: http://lkml.kernel.org/r/1486531318-35189-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Gioh Kim <gi-oh.kim@profitbricks.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: do not access page->mapping directly on page_endio

commit dd8416c47715cf324c9a16f13273f9fda87acfed upstream.

With rw_page, page_endio is used for completing IO on a page and it
propagates write error to the address space if the IO fails.  The
problem is it accesses page->mapping directly which might be okay for
file-backed pages but it shouldn't for anonymous page.  Otherwise, it
can corrupt one of field from anon_vma under us and system goes panic
randomly.

swap_writepage
  bdev_writepage
    ops->rw_page

I encountered the BUG during developing new zram feature and it was
really hard to figure it out because it made random crash, somtime
mmap_sem lockdep, sometime other places where places never related to
zram/zsmalloc, and not reproducible with some configuration.

When I consider how that bug is subtle and people do fast-swap test with
brd, it's worth to add stable mark, I think.

Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: vmpressure: fix sending wrong events on underflow

commit e1587a4945408faa58d0485002c110eb2454740c upstream.

At the end of a window period, if the reclaimed pages is greater than
scanned, an unsigned underflow can result in a huge pressure value and
thus a critical event.  Reclaimed pages is found to go higher than
scanned because of the addition of reclaimed slab pages to reclaimed in
shrink_node without a corresponding increment to scanned pages.

Minchan Kim mentioned that this can also happen in the case of a THP
page where the scanned is 1 and reclaimed could be 512.

Link: http://lkml.kernel.org/r/1486641577-11685-1-git-send-email-vinmenon@codeaurora.org
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Shiraz Hashim <shashim@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_alloc: fix nodes for reclaim in fast path

commit e02dc017c3032dcdce1b993af0db135462e1b4b7 upstream.

When @node_reclaim_node isn't 0, the page allocator tries to reclaim
pages if the amount of free memory in the zones are below the low
watermark.  On Power platform, none of NUMA nodes are scanned for page
reclaim because no nodes match the condition in zone_allows_reclaim().
On Power platform, RECLAIM_DISTANCE is set to 10 which is the distance
of Node-A to Node-A.  So the preferred node even won't be scanned for
page reclaim.

   __alloc_pages_nodemask()
   get_page_from_freelist()
      zone_allows_reclaim()

Anton proposed the test code as below:

   # cat alloc.c
      :
   int main(int argc, char *argv[])
   {
void *p;
unsigned long size;
unsigned long start, end;

start = time(NULL);
size = strtoul(argv[1], NULL, 0);
printf("To allocate %ldGB memory\n", size);

size <<= 30;
p = malloc(size);
assert(p);
memset(p, 0, size);

end = time(NULL);
printf("Used time: %ld seconds\n", end - start);
sleep(3600);
return 0;
   }

The system I use for testing has two NUMA nodes.  Both have 128GB
memory.  In below scnario, the page caches on node#0 should be reclaimed
when it encounters pressure to accommodate request of allocation.

   # echo 2 > /proc/sys/vm/zone_reclaim_mode; \
     sync; \
     echo 3 > /proc/sys/vm/drop_caches; \
   # taskset -c 0 cat file.32G > /dev/null; \
     grep FilePages /sys/devices/system/node/node0/meminfo
     Node 0 FilePages:       33619712 kB
   # taskset -c 0 ./alloc 128
   # grep FilePages /sys/devices/system/node/node0/meminfo
     Node 0 FilePages:       33619840 kB
   # grep MemFree /sys/devices/system/node/node0/meminfo
     Node 0 MemFree:          186816 kB

With the patch applied, the pagecache on node-0 is reclaimed when its
free memory is running out.  It's the expected behaviour.

   # echo 2 > /proc/sys/vm/zone_reclaim_mode; \
     sync; \
     echo 3 > /proc/sys/vm/drop_caches
   # taskset -c 0 cat file.32G > /dev/null; \
     grep FilePages /sys/devices/system/node/node0/meminfo
     Node 0 FilePages:       33605568 kB
   # taskset -c 0 ./alloc 128
   # grep FilePages /sys/devices/system/node/node0/meminfo
     Node 0 FilePages:        1379520 kB
   # grep MemFree /sys/devices/system/node/node0/meminfo
     Node 0 MemFree:           317120 kB

Fixes: 5f7a75acdb24 ("mm: page_alloc: do not cache reclaim distances")
Link: http://lkml.kernel.org/r/1486532455-29613-1-git-send-email-gwshan@linux.vnet.ibm.com
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, devm_memremap_pages: hold device_hotplug lock over mem_hotplug_{begin, done}

commit b5d24fda9c3dce51fcb4eee459550a458eaaf1e2 upstream.

The mem_hotplug_{begin,done} lock coordinates with {get,put}_online_mems()
to hold off "readers" of the current state of memory from new hotplug
actions.  mem_hotplug_begin() expects exclusive access, via the
device_hotplug lock, to set mem_hotplug.active_writer.  Calling
mem_hotplug_begin() without locking device_hotplug can lead to
corrupting mem_hotplug.refcount and missed wakeups / soft lockups.

[dan.j.williams@intel.com: v2]
Link: http://lkml.kernel.org/r/148728203365.38457.17804568297887708345.stgit@dwillia2-desk3.amr.corp.intel.com
Link: http://lkml.kernel.org/r/148693885680.16345.17802627926777862337.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: f931ab479dd2 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: Fix splice read for non-cached files

commit 9c25702cee1405099f982894c865c163de7909a8 upstream.

Currently we call copy_page_to_iter() for uncached reading into a pipe.
This is wrong because it treats pages as VFS cache pages and copies references
rather than actual data. When we are trying to read from the pipe we end up
calling page_cache_pipe_buf_confirm() which returns -ENODATA. This error
is translated into 0 which is returned to a user.

This issue is reproduced by running xfs-tests suite (generic test #249)
against mount points with "cache=none". Fix it by mapping pages manually
and calling copy_to_iter() that copies data into the pipe.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Tylersburg isoch identity map check is done too late.

commit 21e722c4c8377b5bc82ad058fed12165af739c1b upstream.

The check to set identity map for tylersburg is done too late. It needs
to be done before the check for identity_map domain is done.

To: Joerg Roedel <joro@8bytes.org>
To: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: Ashok Raj <ashok.raj@intel.com>
Fixes: 86080ccc22 ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reported-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu

commit aaa59306b0b7e0ca4ba92cc04c5db101cbb1c096 upstream.

Some of the macros are incorrect with wrong bit-shifts resulting in picking
the incorrect invalidation granularity. Incorrect Source-ID in extended
devtlb invalidation caused device side errors.

To: Joerg Roedel <joro@8bytes.org>
To: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: CQ Tang <cq.tang@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Fixes: 2f26e0a9 ("iommu/vt-d: Add basic SVM PASID support")
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm_tis: fix the error handling of init_tis()

commit 5939eaf4f9d432586dd2cdeea778506471e8088e upstream.

Add the missing platform_driver_unregister() and remove the duplicate
platform_device_unregister(force_pdev) in the error handling case.

Fixes: 00194826e6be ("tpm_tis: Clean up the force=1 module parameter")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: Fix regulator_summary for deviceless consumers

commit e42a46b6f52473661ad192f76a128a68fe301df4 upstream.

It is allowed to call regulator_get with a NULL dev argument
(_regulator_get explicitly checks for it) but this causes an error later
when printing /sys/kernel/debug/regulator_summary.

Fix this by explicitly handling "deviceless" consumers in the debugfs code.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: STM: Balance enable/disable

commit 4474f4c40a9c607c7317e686b23619b7b768004f upstream.

The stm is automatically enabled when an application sets the policy
via ->link() call back by using coresight_enable(), which keeps the
refcount of the current users of the STM. However, the unlink() callback
issues stm_disable() directly, which leaves the STM turned off, without
the coresight layer knowing about it. This prevents any further uses
of the STM hardware as the coresight layer still thinks the STM is
turned on and doesn't enable the hardware when required. Even manually
enabling the STM via sysfs can't really enable the hw.

e.g,

 $ echo 1 > $CS_DEVS/$ETR/enable_sink
 $ mkdir -p $CONFIG_FS/stp-policy/$source.0/stm_test/
 $ echo 32768 65535 > $CONFIG_FS/stp-policy/$source.0/stm_test/channels
 $ echo 64 > $CS_DEVS/$source/traceid
 $ ./stm_app
 Sending 64000 byte blocks of pattern 0 at 0us intervals
 Success to map channel(32768~32783) to 0xffffa95fa000
 Sending on channel 32768
 $ dd if=/dev/$ETR of=~/trace.bin.1
 597+1 records in
 597+1 records out
 305920 bytes (306 kB) copied, 0.399952 s, 765 kB/s
 $ ./stm_app
 Sending 64000 byte blocks of pattern 0 at 0us intervals
 Success to map channel(32768~32783) to 0xffff7e9e2000
 Sending on channel 32768
 $ dd if=/dev/$ETR of=~/trace.bin.2
 0+0 records in
 0+0 records out
 0 bytes (0 B) copied, 0.0232083 s, 0.0 kB/s

 Note that we don't get any data from the ETR for the second session.

 Also dmesg shows :

 [   77.520458] coresight-tmc 20800000.etr: TMC-ETR enabled
 [   77.537097] coresight-replicator etr_replicator@20890000: REPLICATOR enabled
 [   77.558828] coresight-replicator main_replicator@208a0000: REPLICATOR enabled
 [   77.581068] coresight-funnel 208c0000.main_funnel: FUNNEL inport 0 enabled
 [   77.602217] coresight-tmc 20840000.etf: TMC-ETF enabled
 [   77.618422] coresight-stm 20860000.stm: STM tracing enabled
 [  139.554252] coresight-stm 20860000.stm: STM tracing disabled
  # End of first tracing session
 [  146.351135] coresight-tmc 20800000.etr: TMC read start
 [  146.514486] coresight-tmc 20800000.etr: TMC read end
  # Note that the STM is not turned on via stm_generic_link()->coresight_enable()
  # and hence none of the components are turned on.
 [  152.479080] coresight-tmc 20800000.etr: TMC read start
 [  152.542632] coresight-tmc 20800000.etr: TMC read end

This patch fixes the problem by balancing the unlink operation by using
the coresight_disable(), keeping the coresight layer in sync with the
hardware state and thus allowing normal usage of the STM component.

Fixes: commit 237483aa5cf43 ("coresight: stm: adding driver for CoreSight STM component")
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reported-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl: fix possible NULL pointer dereference

commit 6e017006022abfea5d2466cad936065f45763ad1 upstream.

gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with
a destination argument that an earlier function call may have set to NULL:

staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr':
staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull]
staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr':
staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull]

I'm fixing this by adding a NULL pointer check and returning failure
from the function, which is hopefully already handled properly.

This seems to date back to when the drivers were originally added,
so backporting the fix to stable seems appropriate. There are other
related realtek drivers in the kernel, but none of them contain a
function with a similar name or produce this warning.

Fixes: 1cc18a22b96b ("staging: r8188eu: Add files for new driver - part 5")
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lnet: Fix allocation size for sv_cpt_data

commit dc7ffefdcc28a45214aa707fdc3df6a5e611ba09 upstream.

This is unbreaking another of those "stealth" janitor
patches that got in and subtly broke some things.

sv_cpt_data is a pointer to pointer, so need to
dereference it twice to allocate the correct structure size.

Fixes: 9899cb68c6c2 ("Staging: lustre: rpc: Use sizeof type *pointer instead of sizeof type.")
CC: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: loopback: fix broken udelay

commit 33b8807a6fe10d0e675e0704444373a6fad93188 upstream.

The loopback driver allows the user to set a minimum delay of up to one
second to be inserted between test iterations (i.e. request
submissions). The delay is currently specified in microseconds and is
implemented using udelay.

Busy looping for long periods is not just anti-social; udelay must not
be used for delays longer than a few milliseconds due to the risk of
integer overflow.

Replace the broken udelay with a usleep_range with a 100 us range for
short delays (< 20 ms) and otherwise revert to using msleep.

Fixes: b36f04fa9417 ("greybus: loopback: Convert thread delay to microseconds")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (it87) Ensure that pwm control cache is current before updating values

commit 82dbe987b70042b340f851bdc969a971081e5f02 upstream.

If sensor attributes were never read, the pwm control data has not been
initiialized, which can cause wrong driver behavior. Ensure that cached
data is current before acting on it.

Reported-by: Kevin Folz <kfolz@evertz.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers

commit 4c7b8ca1ae5ed9e27014732c8a918ba11a86cf09 upstream.

In IT8620E, after setting pwm control to manual, it was observed that
pwm values for fan 4..6 have reversed results (writing 0 results in fans
running at full speed, writing 255 results in fans turned off).

With the new PWM control, pwm polarity for pwm control 4..6 is specified
in its pwm control registers. Those registers are overwritten when setting
the pwm mode or the temperature mapping. Do not touch bit 2..6 of pwm
control registers on register writes to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine

commit 29693efcea0f38cf40d0055d2401490a4f9bf8be upstream.

On this machine, the micmute button is connected to Line2 of the
codec and the micmute led is connected to GPIO2 of the codec.

After applying this quirk, both hotkey and led work well.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming

commit 493de342748cc6f52938096f5480cf291da58a0b upstream.

Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like
Inspiron 7599 to support its subwoofer speaker.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix link corruption by event error handling

commit f3ac9f737603da80c2da3e84b89e74429836bb6d upstream.

The sequencer FIFO management has a bug that may lead to a corruption
(shortage) of the cell linked list.  When a sequencer client faces an
error at the event delivery, it tries to put back the dequeued cell.
When the first queue was put back, this forgot the tail pointer
tracking, and the link will be screwed up.

Although there is no memory corruption, the sequencer client may stall
forever at exit while flushing the pending FIFO cells in
snd_seq_pool_done(), as spotted by syzkaller.

This patch addresses the missing tail pointer tracking at
snd_seq_fifo_cell_putback().  Also the patch makes sure to clear the
cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar
mess-up of the FIFO linked list.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ctxfi: Fallback DMA mask to 32bit

commit 15c75b09f8d190f89ab4db463b87d411ca349dfe upstream.

Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit
architectures, and bails out if it fails.  This causes a problem on
some platforms since the 64bit DMA isn't always guaranteed.  We should
fall back to the default 32bit DMA when 64bit DMA fails.

Fixes: 6d74b86d3c0f ("ALSA: ctxfi - Allow 64bit DMA")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Reject user params with too small ticks

commit 71321eb3f2d0df4e6c327e0b936eec4458a12054 upstream.

When a user sets a too small ticks with a fine-grained timer like
hrtimer, the kernel tries to fire up the timer irq too frequently.
This may lead to the condensed locks, eventually the kernel spinlock
lockup with warnings.

For avoiding such a situation, we define a lower limit of the
resolution, namely 1ms.  When the user passes a too small tick value
that results in less than that, the kernel returns -EINVAL now.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - fix Lewisburg audio issue

commit e7480b34ad1ab84a63540b2c884cb92c0764ab74 upstream.

Like for Sunrise Point, the total stream number of Lewisburg's
input and output stream exceeds 15 (GCAP is 0x9701), which will
cause some streams do not work because of the overflow on
SDxCTL.STRM field if using the legacy stream tag allocation method.

Fixes: 5cf92c8b3dc5 ("ALSA: hda - Add Intel Lewisburg device IDs Audio")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Cannot adjust speaker's volume on a Dell AIO

commit 9f1bc2c4c58fcb2d86e0e26437dc8f3a18ac3276 upstream.

The issue is the same as "dd9aa335c880 ALSA: hda/realtek - Can't adjust
speaker's volume on a Dell AIO", the output requires to connect to a node
with Amp-out capability.

Applying the same fixup "ALC298_FIXUP_SPK_VOLUME" can fix the issue.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: Enable DMA on sama5d2_xplained console

commit 78162d48466d23c45a784034630c5928af631e3d upstream.

Enable DMA on uart1 to get a more reliable console.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: Enable DMA on sama5d4_xplained console

commit ef8d02d4a2c36f7a93e74c95a9c419353b310117 upstream.

Enable DMA on usart3 to get a more reliable console. This is especially
useful for automation and kernelci were a kernel with PROVE_LOCKING enabled
is quite susceptible to character loss, resulting in tests failure.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91: define LPDDR types

commit e3f0a4017c2143b4b813df6a93e8cf79e3f76936 upstream.

The Atmel MPDDR controller support LPDDR2 and LPDDR3 memories, add their
types.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: s3c64xx: fix inconsistency between binding and driver

commit 379f831a927817c130a62e3ca0082ae685557324 upstream.

Commit a92e7c3d82a1 ("spi: s3c64xx: consider the case when the CS
line is not connected") introduced an inconsistency between the
binding, where the disconnected CS line was marked as
'no-cs-readback', and the driver.

The driver is erroneously checking for that attribute with
property name of 'broken-cs'.

Check for 'no-cs-readback' in the driver as well.

Fixes: a92e7c3d82a1 ("spi: s3c64xx: consider the case when the CS line is not connected")
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()

commit c755e251357a0cee0679081f08c3f4ba797a8009 upstream.

The xattr_sem deadlock problems fixed in commit 2e81a4eeedca: "ext4:
avoid deadlock when expanding inode size" didn't include the use of
xattr_sem in fs/ext4/inline.c.  With the addition of project quota
which added a new extra inode field, this exposed deadlocks in the
inline_data code similar to the ones fixed by 2e81a4eeedca.

The deadlock can be reproduced via:

   dmesg -n 7
   mke2fs -t ext4 -O inline_data -Fq -I 256 /dev/vdc 32768
   mount -t ext4 -o debug_want_extra_isize=24 /dev/vdc /vdc
   mkdir /vdc/a
   umount /vdc
   mount -t ext4 /dev/vdc /vdc
   echo foo > /vdc/a/foo

and looks like this:

[   11.158815]
[   11.160276] =============================================
[   11.161960] [ INFO: possible recursive locking detected ]
[   11.161960] 4.10.0-rc3-00015-g011b30a8a3cf #160 Tainted: G        W
[   11.161960] ---------------------------------------------
[   11.161960] bash/2519 is trying to acquire lock:
[   11.161960]  (&ei->xattr_sem){++++..}, at: [<c1225a4b>] ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]
[   11.161960] but task is already holding lock:
[   11.161960]  (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152
[   11.161960]
[   11.161960] other info that might help us debug this:
[   11.161960]  Possible unsafe locking scenario:
[   11.161960]
[   11.161960]        CPU0
[   11.161960]        ----
[   11.161960]   lock(&ei->xattr_sem);
[   11.161960]   lock(&ei->xattr_sem);
[   11.161960]
[   11.161960]  *** DEADLOCK ***
[   11.161960]
[   11.161960]  May be due to missing lock nesting notation
[   11.161960]
[   11.161960] 4 locks held by bash/2519:
[   11.161960]  #0:  (sb_writers#3){.+.+.+}, at: [<c11a2414>] mnt_want_write+0x1e/0x3e
[   11.161960]  #1:  (&type->i_mutex_dir_key){++++++}, at: [<c119508b>] path_openat+0x338/0x67a
[   11.161960]  #2:  (jbd2_handle){++++..}, at: [<c123314a>] start_this_handle+0x582/0x622
[   11.161960]  #3:  (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152
[   11.161960]
[   11.161960] stack backtrace:
[   11.161960] CPU: 0 PID: 2519 Comm: bash Tainted: G        W       4.10.0-rc3-00015-g011b30a8a3cf #160
[   11.161960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014
[   11.161960] Call Trace:
[   11.161960]  dump_stack+0x72/0xa3
[   11.161960]  __lock_acquire+0xb7c/0xcb9
[   11.161960]  ? kvm_clock_read+0x1f/0x29
[   11.161960]  ? __lock_is_held+0x36/0x66
[   11.161960]  ? __lock_is_held+0x36/0x66
[   11.161960]  lock_acquire+0x106/0x18a
[   11.161960]  ? ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  down_write+0x39/0x72
[   11.161960]  ? ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  ? _raw_read_unlock+0x22/0x2c
[   11.161960]  ? jbd2_journal_extend+0x1e2/0x262
[   11.161960]  ? __ext4_journal_get_write_access+0x3d/0x60
[   11.161960]  ext4_mark_inode_dirty+0x17d/0x26d
[   11.161960]  ? ext4_add_dirent_to_inline.isra.12+0xa5/0xb2
[   11.161960]  ext4_add_dirent_to_inline.isra.12+0xa5/0xb2
[   11.161960]  ext4_try_add_inline_entry+0x69/0x152
[   11.161960]  ext4_add_entry+0xa3/0x848
[   11.161960]  ? __brelse+0x14/0x2f
[   11.161960]  ? _raw_spin_unlock_irqrestore+0x44/0x4f
[   11.161960]  ext4_add_nondir+0x17/0x5b
[   11.161960]  ext4_create+0xcf/0x133
[   11.161960]  ? ext4_mknod+0x12f/0x12f
[   11.161960]  lookup_open+0x39e/0x3fb
[   11.161960]  ? __wake_up+0x1a/0x40
[   11.161960]  ? lock_acquire+0x11e/0x18a
[   11.161960]  path_openat+0x35c/0x67a
[   11.161960]  ? sched_clock_cpu+0xd7/0xf2
[   11.161960]  do_filp_open+0x36/0x7c
[   11.161960]  ? _raw_spin_unlock+0x22/0x2c
[   11.161960]  ? __alloc_fd+0x169/0x173
[   11.161960]  do_sys_open+0x59/0xcc
[   11.161960]  SyS_open+0x1d/0x1f
[   11.161960]  do_int80_syscall_32+0x4f/0x61
[   11.161960]  entry_INT80_32+0x2f/0x2f
[   11.161960] EIP: 0xb76ad469
[   11.161960] EFLAGS: 00000286 CPU: 0
[   11.161960] EAX: ffffffda EBX: 08168ac8 ECX: 00008241 EDX: 000001b6
[   11.161960] ESI: b75e46bc EDI: b7755000 EBP: bfbdb108 ESP: bfbdafc0
[   11.161960]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b

Reported-by: George Spelvin <linux@sciencehorizons.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: Properly pass through media entity types in entity enumeration

commit 98d85f3cb912fde14593ead54dea4c1a00b3966f upstream.

When the functions replaced media entity types, the range which was
allowed for the types was incorrect. This meant that media entity types
for specific devices were not passed correctly to the userspace through
MEDIA_IOC_ENUM_ENTITIES. Fix it.

Fixes: commit b2cd27448b33 ("[media] media-device: map new functions into old types for legacy API")
Reported-and-tested-by: Antti Laakso <antti.laakso@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lirc_dev: LIRC_{G,S}ET_REC_MODE do not work

commit bd291208d7f5d6b2d6a033fee449a429230b06df upstream.

Since "273b902 [media] lirc_dev: use LIRC_CAN_REC() define" these
ioctls no longer work.

Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxd2820r: fix gpio null pointer dereference

commit 0ffb94b6cc5df6376ab6bff5b80075641f6716f8 upstream.

Setting GPIOs during probe causes null pointer deference when
GPIOLIB was not selected by Kconfig. Initialize driver private
field before calling set gpios.

It is regressing bug since 4.9.

Fixes: 07fdf7d9f19f ("[media] cxd2820r: add I2C driver bindings")

Reported-by: Chris Rankin <rankincj@gmail.com>
Tested-by: Chris Rankin <rankincj@gmail.com>
Tested-by: Håkan Lennestål <hakan.lennestal@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: fix dm1105.c build error

commit e3bb3cddd177550d63a3e4909cf1a7782f13414d upstream.

Fix dm1105 build error when CONFIG_I2C_ALGOBIT=m and
CONFIG_DVB_DM1105=y.

drivers/built-in.o: In function `dm1105_probe':
dm1105.c:(.text+0x2836e7): undefined reference to `i2c_bit_add_bus'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uvcvideo: Fix a wrong macro

commit 17c341ec0115837a610b2da15e32546e26068234 upstream.

Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes.

Fixes: 6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc")

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

am437x-vpfe: always assign bpp variable

commit 6ebf75774f823ddbdbd10921006989d4df222f4a upstream.

In vpfe_s_fmt(), when the sensor format and the requested format were
the same, bpp was assigned to vpfe->bpp without being initialized first.

Grab the bpp value that is currently used by using __vpfe_get_format()
instead of its wrapper, vpfe_try_fmt().

This use of uninitialized variable has been found by compiling the
kernel with clang.

Fixes: 417d2e507edc ("[media] media: platform: add VPFE capture driver
support for AM437X")

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-acpi: support deferred probe

commit e28d6f048799acb0014491e6b74e580d84bd7916 upstream.

With commit 67bf5156edc4 ("gpio / ACPI: fix returned error from
acpi_dev_gpio_irq_get()"), mmc_gpiod_request_cd() returns -EPROBE_DEFER if
GPIO is not ready when sdhci-acpi driver is probed, and sdhci-acpi driver
should be probed again later in this case.

This fixes an order issue when both GPIO and sdhci-acpi drivers are built
as modules.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177101
Tested-by: Jonas Aaberg <cja@gmx.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Handle microMIPS jumps in the same way as MIPS32/MIPS64 jumps

commit 096a0de427ea333f56f0ee00328cff2a2731bcf1 upstream.

is_jump_ins() checks for plain jump ("j") instructions since commit
e7438c4b893e ("MIPS: Fix sibling call handling in get_frame_info") but
that commit didn't make the same change to the microMIPS code, leaving
it inconsistent with the MIPS32/MIPS64 code. Handle the microMIPS
encoding of the jump instruction too such that it behaves consistently.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: e7438c4b893e ("MIPS: Fix sibling call handling in get_frame_info")
Cc: Tony Wu <tung7970@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14533/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Calculate microMIPS ra properly when unwinding the stack

commit bb9bc4689b9c635714fbcd5d335bad9934a7ebfc upstream.

get_frame_info() calculates the offset of the return address within a
stack frame simply by dividing a the bottom 16 bits of the instruction,
treated as a signed integer, by the size of a long. Whilst this works
for MIPS32 & MIPS64 ISAs where the sw or sd instructions are used, it's
incorrect for microMIPS where encodings differ. The result is that we
typically completely fail to unwind the stack on microMIPS.

Fix this by adjusting is_ra_save_ins() to calculate the return address
offset, and take into account the various different encodings there in
the same place as we consider whether an instruction is storing the
ra/$31 register.

With this we are now able to unwind the stack for kernels targetting the
microMIPS ISA, for example we can produce:

    Call Trace:
    [<80109e1f>] show_stack+0x63/0x7c
    [<8011ea17>] __warn+0x9b/0xac
    [<8011ea45>] warn_slowpath_fmt+0x1d/0x20
    [<8013fe53>] register_console+0x43/0x314
    [<8067c58d>] of_setup_earlycon+0x1dd/0x1ec
    [<8067f63f>] early_init_dt_scan_chosen_stdout+0xe7/0xf8
    [<8066c115>] do_early_param+0x75/0xac
    [<801302f9>] parse_args+0x1dd/0x308
    [<8066c459>] parse_early_options+0x25/0x28
    [<8066c48b>] parse_early_param+0x2f/0x38
    [<8066e8cf>] setup_arch+0x113/0x488
    [<8066c4f3>] start_kernel+0x57/0x328
    ---[ end trace 0000000000000000 ]---

Whereas previously we only produced:

    Call Trace:
    [<80109e1f>] show_stack+0x63/0x7c
    ---[ end trace 0000000000000000 ]---

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14532/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix is_jump_ins() handling of 16b microMIPS instructions

commit 67c75057709a6d85c681c78b9b2f9b71191f01a2 upstream.

is_jump_ins() checks 16b instruction fields without verifying that the
instruction is indeed 16b, as is done by is_ra_save_ins() &
is_sp_move_ins(). Add the appropriate check.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix get_frame_info() handling of microMIPS function size

commit b6c7a324df37bf05ef7a2c1580683cf10d082d97 upstream.

get_frame_info() is meant to iterate over up to the first 128
instructions within a function, but for microMIPS kernels it will not
reach that many instructions unless the function is 512 bytes long since
we calculate the maximum number of instructions to check by dividing the
function length by the 4 byte size of a union mips_instruction. In
microMIPS kernels this won't do since instructions are variable length.

Fix this by instead checking whether the pointer to the current
instruction has reached the end of the function, and use max_insns as a
simple constant to check the number of iterations against.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14530/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Prevent unaligned accesses during stack unwinding

commit a3552dace7d1d0cabf573e88fc3025cb90c4a601 upstream.

During stack unwinding we call a number of functions to determine what
type of instruction we're looking at. The union mips_instruction pointer
provided to them may be pointing at a 2 byte, but not 4 byte, aligned
address & we thus cannot directly access the 4 byte wide members of the
union mips_instruction. To avoid this is_ra_save_ins() copies the
required half-words of the microMIPS instruction to a correctly aligned
union mips_instruction on the stack, which it can then access safely.
The is_jump_ins() & is_sp_move_ins() functions do not correctly perform
this temporary copy, and instead attempt to directly dereference 4 byte
fields which may be misaligned and lead to an address exception.

Fix this by copying the instruction halfwords to a temporary union
mips_instruction in get_frame_info() such that we can provide a 4 byte
aligned union mips_instruction to the is_*_ins() functions and they do
not need to deal with misalignment themselves.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Clear ISA bit correctly in get_frame_info()

commit ccaf7caf2c73c6db920772bf08bf1d47b2170634 upstream.

get_frame_info() can be called in microMIPS kernels with the ISA bit
already clear. For example this happens when unwind_stack_by_address()
is called because we begin with a PC that has the ISA bit set & subtract
the (odd) offset from the preceding symbol (which does not have the ISA
bit set). Since get_frame_info() unconditionally subtracts 1 from the PC
in microMIPS kernels it incorrectly misaligns the address it then
attempts to access code at, leading to an address error exception.

Fix this by using msk_isa16_mode() to clear the ISA bit, which allows
get_frame_info() to function regardless of whether it is provided with a
PC that has the ISA bit set or not.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14528/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Lantiq: Keep ethernet enabled during boot

commit 774f0c6419bb8f9d83901d33582c7fe3ba6a6cb3 upstream.

Disabling ethernet during reboot (only to enable it again when the
ethernet driver attaches) can put the chip into a faulty state where it
corrupts the header of all incoming packets.

This happens if packets arrive during the time window where the core is
disabled, and it can be easily reproduced by rebooting while sending a
flood ping to the broadcast address.

Fixes: 95135bfa7ead ("MIPS: Lantiq: Deactivate most of the devices by default")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: John Crispin <john@phrozen.org>
Cc: hauke.mehrtens@lantiq.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15078/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: OCTEON: Fix copy_from_user fault handling for large buffers

commit 884b426917e4b3c85f33b382c792a94305dfdd62 upstream.

If copy_from_user is called with a large buffer (>= 128 bytes) and the
userspace buffer refers partially to unreadable memory, then it is
possible for Octeon's copy_from_user to report the wrong number of bytes
have been copied. In the case where the buffer size is an exact multiple
of 128 and the fault occurs in the last 64 bytes, copy_from_user will
report that all the bytes were copied successfully but leave some
garbage in the destination buffer.

The bug is in the main __copy_user_common loop in octeon-memcpy.S where
in the middle of the loop, src and dst are incremented by 128 bytes. The
l_exc_copy fault handler is used after this but that assumes that
"src < THREAD_BUADDR($28)". This is not the case if src has already been
incremented.

Fix by adding an extra fault handler which rewinds the src and dst
pointers 128 bytes before falling though to l_exc_copy.

Thanks to the pwritev test from the strace test suite for originally
highlighting this bug!

Fixes: 5b3b16880f40 ("MIPS: Add Cavium OCTEON processor support ...")
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14978/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: BCM47XX: Fix button inversion for Asus WL-500W

commit bdfdaf1a016ef09cb941f2edad485a713510b8d5 upstream.

The Asus WL-500W buttons are active high, but the software treats them
as active low. Fix the inverted logic.

Fixes: 3be972556fa1 ("MIPS: BCM47XX: Import buttons database from OpenWrt")
Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15295/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix special case in 64 bit IP checksumming.

commit 66fd848cadaa6be974a8c780fbeb328f0af4d3bd upstream.

For certain arguments such as saddr = 0xc0a8fd60, daddr = 0xc0a8fda1,
len = 80, proto = 17, sum = 0x7eae049d there will be a carry when
folding the intermediate 64 bit checksum to 32 bit but the code doesn't
add the carry back to the one's complement sum, thus an incorrect result
will be generated.

Reported-by: Mark Zhang <bomb.zhang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()

commit a726f1d2dd4fee179aa4513176d688ad309de6cc upstream.

Early clock API pic32_get_pbclk() is defined in early_clk.c and used by
time.c and early_console.c. When CONFIG_EARLY_PRINTK isn't set,
early_clk.c isn't compiled and time.c fails to link.

Fix it by compiling early_clk.c always. Also sort files in alphabetical
order.

Fixes: 6e4ad1b41360 ("MIPS: pic32mzda: fix getting timer clock rate.")
Reported-by: Harvey Hunt <harvey.hunt@imgtec.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Joshua Henderson <digitalpeer@digitalpeer.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13383/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.13

xfs: clear delalloc and cache on buffered write failure

commit fa7f138ac4c70dc00519c124cf7cd4862a0a5b0e upstream.

The buffered write failure handling code in
xfs_file_iomap_end_delalloc() has a couple minor problems. First, if
written == 0, start_fsb is not rounded down and it fails to kill off a
delalloc block if the start offset is block unaligned. This results in a
lingering delalloc block and broken delalloc block accounting detected
at unmount time. Fix this by rounding down start_fsb in the unlikely
event that written == 0.

Second, it is possible for a failed overwrite of a delalloc extent to
leave dirty pagecache around over a hole in the file. This is because is
possible to hit ->iomap_end() on write failure before the iomap code has
attempted to allocate pagecache, and thus has no need to clean it up. If
the targeted delalloc extent was successfully written by a previous
write, however, then it does still have dirty pages when ->iomap_end()
punches out the underlying blocks. This ultimately results in writeback
over a hole. To fix this problem, unconditionally punch out the
pagecache from XFS before the associated delalloc range.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down

commit 575ddce0507789bf9830d089557d2199d2f91865 upstream.

In the function rtl_usb_start we pre-allocate a certain number of urbs
for RX path but they will not be freed when calling rtl_usb_stop. This
results in leaking urbs when doing ifconfig up and down. Eventually,
the system has no available urbs.

Signed-off-by: Michael Schenk <michael.schenk@albis-elcon.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix double-free in the failure path of cgwb_bdi_init()

commit 5f478e4ea5c5560b4e40eb136991a09f9389f331 upstream.

When !CONFIG_CGROUP_WRITEBACK, bdi has single bdi_writeback_congested
at bdi->wb_congested.  cgwb_bdi_init() allocates it with kzalloc() and
doesn't do further initialization.  This usually works fine as the
reference count gets bumped to 1 by wb_init() and the put from
wb_exit() releases it.

However, when wb_init() fails, it puts the wb base ref automatically
freeing the wb and the explicit kfree() in cgwb_bdi_init() error path
ends up trying to free the same pointer the second time causing a
double-free.

Fix it by explicitly initilizing the refcnt to 1 and putting the base
ref from cgwb_bdi_destroy().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: a13f35e87140 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPICA: Linuxize: Restore and fix Intel compiler build

commit ffab9188e444854882dbc291500d576d6bad7b7b upstream.

ACPICA commit b59347d0b8b676cb555fe8da5cad08fcd4eeb0d3

The following commit cleans up compiler specific inclusions:

  Commit: 9fa1cebdbfff3db8953cebca8ee327d75edefc40
  Subject: ACPICA: OSL: Cleanup the inclusion order of the compiler-specific headers

But breaks one thing due to the following old issue:

 Buidling Linux kernel with Intel compiler originally depends on acgcc.h
 not acintel.h.

So after making Intel compiler build working in ACPICA upstream by
correctly using acintel.h, it becomes unable to build Linux kernel using
Intel compiler as there is no acintel.h in the kernel source tree.

This patch releases acintel.h to Linux kernel and fixes its inclusion in
acenv.h.

Fixes: 9fa1cebdbfff (ACPICA: OSL: Cleanup the inclusion order of the compiler-specific headers)
Link: https://github.com/acpica/acpica/commit/b59347d0
Tested-by: Stepan M Mishura <stepan.m.mishura@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_ct_helper: warn when not applying default helper assignment

commit dfe75ff8ca74f54b0fa5a326a1aa9afa485ed802 upstream.

Commit 3bb398d925 ("netfilter: nf_ct_helper: disable automatic helper
assignment") is causing behavior regressions in firewalls, as traffic
handled by conntrack helpers is now by default not passed through even
though it was before due to missing CT targets (which were not necessary
before this commit).

The default had to be switched off due to security reasons [1] [2] and
therefore should stay the way it is, but let's be friendly to firewall
admins and issue a warning the first time we're in situation where packet
would be likely passed through with the old default but we're likely going
to drop it on the floor now.

Rewrite the code a little bit as suggested by Linus, so that we avoid
spaghettiing the code even more -- namely the whole decision making
process regarding helper selection (either automatic or not) is being
separated, so that the whole logic can be simplified and code (condition)
duplication reduced.

[1] https://cansecwest.com/csw12/conntrack-attack.pdf
[2] https://home.regit.org/netfilter-en/secure-use-of-helpers/

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

goldfish: Sanitize the broken interrupt handler

commit 6cf18e6927c0b224f972e3042fb85770d63cb9f8 upstream.

This interrupt handler is broken in several ways:

  - It loops forever when the op code is not decodeable

  - It never returns IRQ_HANDLED because the only way to exit the loop
    returns IRQ_NONE unconditionally.

The whole concept of this is broken. Creating devices in an interrupt
handler is beyond any point of sanity.

Make it at least behave halfways sane so accidental users do not have to
deal with a hard to debug lockup.

Fixes: e809c22b8fb028 ("goldfish: add the goldfish virtual bus")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/platform/goldfish: Prevent unconditional loading

commit 47512cfd0d7a8bd6ab71d01cd89fca19eb2093eb upstream.

The goldfish platform code registers the platform device unconditionally
which causes havoc in several ways if the goldfish_pdev_bus driver is
enabled:

 - Access to the hardcoded physical memory region, which is either not
   available or contains stuff which is completely unrelated.

 - Prevents that the interrupt of the serial port can be requested

 - In case of a spurious interrupt it goes into a infinite loop in the
   interrupt handler of the pdev_bus driver (which needs to be fixed
   seperately).

Add a 'goldfish' command line option to make the registration opt-in when
the platform is compiled in.

I'm seriously grumpy about this engineering trainwreck, which has seven
SOBs from Intel developers for 50 lines of code. And none of them figured
out that this is broken. Impressive fail!

Fixes: ddd70cf93d78 ("goldfish: platform device for x86")
Reported-by: Gabriel C <nix.or.die@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: console: fix uninitialised spinlock

commit 14816b16fa0adac24f82492f18fa62c55acabbbe upstream.

Since commit 4a510969374a ("tty: Make tty_files_lock per-tty") a new
tty_struct spin lock is taken in the tty release path, but the
USB-serial-console hack was never updated hence leaving the lock of its
"fake" tty uninitialised. This was eventually detected by lockdep.

Make sure to initialise the new lock also for the fake tty to address
this regression.

Yes, this code is a mess, but cleaning it up is left for another day.

Fixes: 4a510969374a ("tty: Make tty_files_lock per-tty")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ark3116: fix register-accessor error handling

commit 9fef37d7cf170522fb354d6d0ea6de09b9b16678 upstream.

The current implementation failed to detect short transfers, something
which could lead to bits of the uninitialised heap transfer buffer
leaking to user space.

Fixes: 149fc791a452 ("USB: ark3116: Setup some basic infrastructure for new ark3116 driver.")
Fixes: f4c1e8d597d1 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: opticon: fix CTS retrieval at open

commit 2eee05020a0e7ee7c04422cbacdb07859e45dce6 upstream.

The opticon driver used a control request at open to trigger a CTS
status notification to be sent over the bulk-in pipe. When the driver
was converted to using the generic read implementation, an inverted test
prevented this request from being sent, something which could lead to
TIOCMGET reporting an incorrect CTS state.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 7a6ee2b02751 ("USB: opticon: switch to generic read implementation")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: spcp8x5: fix modem-status handling

commit 5ed8d41023751bdd3546f2fe4118304357efe8d2 upstream.

Make sure to detect short control transfers and return zero on success
when retrieving the modem status.

This fixes the TIOCMGET implementation which since e1ed212d8593 ("USB:
spcp8x5: add proper modem-status support") has returned TIOCM_LE on
successful retrieval, and avoids leaking bits from the stack on short
transfers.

This also fixes the carrier-detect implementation which since the above
mentioned commit unconditionally has returned true.

Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix line-status over-reporting

commit a6bb1e17a39818b01b55d8e6238b4b5f06d55038 upstream.

FTDI devices use a receive latency timer to periodically empty the
receive buffer and report modem and line status (also when the buffer is
empty).

When a break or error condition is detected the corresponding status
flags will be set on a packet with nonzero data payload and the flags
are not updated until the break is over or further characters are
received.

In order to avoid over-reporting break and error conditions, these flags
must therefore only be processed for packets with payload.

This specifically fixes the case where after an overrun, the error
condition is continuously reported and NULL-characters inserted until
further data is received.

Reported-by: Michael Walle <michael@walle.cc>
Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on
break")
Fixes: 166ceb690750 ("USB: ftdi_sio: clean up line-status handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix extreme low-latency setting

commit c6dce2626606ef16434802989466636bc28c1419 upstream.

Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") the FTDI driver has been using a receive latency-timer value of
1 ms instead of the device default of 16 ms.

The latency timer is used to periodically empty a non-full receive
buffer, but a status header is always sent when the timer expires
including when the buffer is empty. This means that a two-byte bulk
message is received every millisecond also for an otherwise idle port as
long as it is open.

Let's restore the pre-2009 behaviour which reduces the rate of the
status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to
62.5 Hz) by not setting ASYNC_LOW_LATENCY by default.

Anyone willing to pay the price for the minimum-latency behaviour should
set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool
such as setserial (e.g. setserial /dev/ttyUSB0 low_latency).

Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove
tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but
to set a minimal latency timer.

Reported-by: Antoine Aubert <a.aubert@overkiz.com>
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: fix modem-status error handling

commit 427c3a95e3e29e65f59d99aaf320d7506f3eed57 upstream.

Make sure to detect short responses when fetching the modem status in
order to avoid parsing uninitialised buffer data and having bits of it
leak to user space.

Note that we still allow for short 1-byte responses.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add new IDs for GE Bx50v3 boards

commit 9a593656def0dc2f6c227851e8e602077267a5f1 upstream.

Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design
change.

Signed-off-by: Ken Lin <yungching0725@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7840: fix another NULL-deref at open

commit 5182c2cf2a9bfb7f066ef0bdd2bb6330b94dd74e upstream.

Fix another NULL-pointer dereference at open should a malicious device
lack an interrupt-in endpoint.

Note that the driver has a broken check for an interrupt-in endpoint
which means that an interrupt URB has never even been submitted.

Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: msm: Fix module autoload

commit abe81f3b8ed2996e1712d26d38ff6b73f582c616 upstream.

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/tty/serial/msm_serial.ko | grep alias
$

After this patch:

$ modinfo drivers/tty/serial/msm_serial.ko | grep alias
alias:          of:N*T*Cqcom,msm-uartdmC*
alias:          of:N*T*Cqcom,msm-uartdm
alias:          of:N*T*Cqcom,msm-uartC*
alias:          of:N*T*Cqcom,msm-uart

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: socket: fix recvmmsg not returning error from sock_error

[ Upstream commit e623a9e9dec29ae811d11f83d0074ba254aba374 ]

Commit 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path"),
changed the exit path of recvmmsg to always return the datagrams
variable and modified the error paths to set the variable to the error
code returned by recvmsg if necessary.

However in the case sock_error returned an error, the error code was
then ignored, and recvmmsg returned 0.

Change the error path of recvmmsg to correctly return the error code
of sock_error.

The bug was triggered by using recvmmsg on a CAN interface which was
not up. Linux 4.6 and later return 0 in this case while earlier
releases returned -ENETDOWN.

Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path")
Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip: fix IP_CHECKSUM handling

[ Upstream commit ca4ef4574f1ee5252e2cd365f8f5d5bafd048f32 ]

The skbs processed by ip_cmsg_recv() are not guaranteed to
be linear e.g. when sending UDP packets over loopback with
MSGMORE.
Using csum_partial() on [potentially] the whole skb len
is dangerous; instead be on the safe side and use skb_checksum().

Thanks to syzkaller team to detect the issue and provide the
reproducer.

v1 -> v2:
 - move the variable declaration in a tighter scope

Fixes: ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptr_ring: fix race conditions when resizing

[ Upstream commit e71695307114335be1ed912f4a347396c2ed0e69 ]

Resizing currently drops consumer lock.  This can cause entries to be
reordered, which isn't good in itself.  More importantly, consumer can
detect a false ring empty condition and block forever.

Further, nesting of consumer within producer lock is problematic for
tun, since it produces entries in a BH, which causes a lock order
reversal:

       CPU0                    CPU1
       ----                    ----
  consume:
  lock(&(&r->consumer_lock)->rlock);
                               resize:
                               local_irq_disable();
                               lock(&(&r->producer_lock)->rlock);
                               lock(&(&r->consumer_lock)->rlock);
  <Interrupt>
  produce:
  lock(&(&r->producer_lock)->rlock);

To fix, nest producer lock within consumer lock during resize,
and keep consumer lock during the whole swap operation.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irda: Fix lockdep annotations in hashbin_delete().

[ Upstream commit 4c03b862b12f980456f9de92db6d508a4999b788 ]

A nested lock depth was added to the hasbin_delete() code but it
doesn't actually work some well and results in tons of lockdep splats.

Fix the code instead to properly drop the lock around the operation
and just keep peeking the head of the hashbin queue.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: fix oops in dev_fill_metadata_dst

[ Upstream commit 22f0708a718daea5e79de2d29b4829de016a4ff4 ]

Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device")
vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL
dst_cache pointer, so the latter should explicitly check for
valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add
dst_cache to ovs vxlan lwtunnel") removed said check.

As a result is possible to trigger a null pointer access calling
vxlan_fill_metadata_dst(), e.g. with:

ovs-vsctl add-br ovs-br0
ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \
type=vxlan options:remote_ip=192.168.1.1 \
options:key=1234 options:dst_port=4789 ofport_request=10
ip address add dev ovs-br0 172.16.1.2/24
ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \
targets=\"172.16.1.1:1234\" sampling=1
iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234

This commit addresses the issue passing to vxlan_get_route() the
dst_cache already available into the lwt info processed by
vxlan_fill_metadata_dst().

Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: fix freeing skb too early for IPV6_RECVPKTINFO

[ Upstream commit 5edabca9d4cff7f1f2b68f0bac55ef99d9798ba4 ]

In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.

However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.

Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.

Similar fixes for TCP:

fb7e2399ec17f1004c0e0ccfd17439f8759ede01 [TCP]: skb is unexpectedly freed.
0aea76d35c9651d55bbaf746e7914e5f9ae5a25d tcp: SYN packets are now
simply consumed

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification

[ Upstream commit 7627ae6030f56a9a91a5b3867b21f35d79c16e64 ]

When setting a neigh related sysctl parameter, we always send a
NETEVENT_DELAY_PROBE_TIME_UPDATE netevent. For instance, when
executing

sysctl net.ipv6.neigh.wlp3s0.retrans_time_ms=2000

a NETEVENT_DELAY_PROBE_TIME_UPDATE netevent is generated.

This is caused by commit 2a4501ae18b5 ("neigh: Send a
notification when DELAY_PROBE_TIME changes"). According to the
commit's description, it was intended to generate such an event
when setting the "delay_first_probe_time" sysctl parameter.

In order to fix this, only generate this event when actually
setting the "delay_first_probe_time" sysctl parameter. This fix
should not have any unintended side-effects, because all but one
registered netevent callbacks check for other netevent event
types (the registered callbacks were obtained by grepping for
"register_netevent_notifier"). The only callback that uses the
NETEVENT_DELAY_PROBE_TIME_UPDATE event is
mlxsw_sp_router_netevent_event() (in
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c): in case
of this event, it only accesses the DELAY_PROBE_TIME of the
passed neigh_parms.

Fixes: 2a4501ae18b5 ("neigh: Send a notification when DELAY_PROBE_TIME changes")
Signed-off-by: Marcus Huewe <suse-tux@gmx.de>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: Do not call fanout_release from atomic contexts

[ Upstream commit 2bd624b4611ffee36422782d16e1c944d1351e98 ]

Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a
netdev"), unfortunately, introduced the following issues.

1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside
rcu_read-side critical section. rcu_read_lock disables preemption, most often,
which prohibits calling sleeping functions.

[  ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section!
[  ]
[  ] rcu_scheduler_active = 1, debug_locks = 0
[  ] 4 locks held by ovs-vswitchd/1969:
[  ]  #0:  (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40
[  ]  #1:  (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch]
[  ]  #2:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20
[  ]  #3:  (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0
[  ]
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110
[  ]  [<ffffffff810a2da7>] ___might_sleep+0x57/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30
[  ]  [<ffffffff81186e88>] ? printk+0x4d/0x4f
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock).
"sleeping function called from invalid context"

[  ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[  ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810a2f52>] ___might_sleep+0x202/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

3. calling dev_remove_pack(&fanout->prot_hook), from inside
spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack()
-> synchronize_net(), which might sleep.

[  ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff81186274>] __schedule_bug+0x64/0x73
[  ]  [<ffffffff8162b8cb>] __schedule+0x6b/0xd10
[  ]  [<ffffffff8162c5db>] schedule+0x6b/0x80
[  ]  [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410
[  ]  [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810
[  ]  [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10
[  ]  [<ffffffff8154eab5>] synchronize_net+0x35/0x50
[  ]  [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20
[  ]  [<ffffffff8161077e>] fanout_release+0xbe/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

4. fanout_release() races with calls from different CPU.

To fix the above problems, remove the call to fanout_release() under
rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and
netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order
to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to
__fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure
fanout->prot_hook is removed as well.

Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: fix races in fanout_add()

[ Upstream commit d199fab63c11998a602205f7ee7ff7c05c97164b ]

Multiple threads can call fanout_add() at the same time.

We need to grab fanout_mutex earlier to avoid races that could
lead to one thread freeing po->rollover that was set by another thread.

Do the same in fanout_release(), for peace of mind, and to help us
finding lockdep issues earlier.

Fixes: dc99f600698d ("packet: Add fanout support.")
Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: ti: cpsw: fix cpsw assignment in resume

[ Upstream commit a60ced990e309666915d21445e95347d12406694 ]

There is a copy-paste error, which hides breaking of resume
for CPSW driver: there was replaced netdev_priv() to ndev_to_cpsw(ndev)
in suspend, but left it unchanged in resume.

Fixes: 606f39939595a4d4540406bfc11f265b2036af6d
(ti: cpsw: move platform data and slaves info to cpsw_common)

Reported-by: Alexey Starikovskiy <AStarikovskiy@topcon.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/llc: avoid BUG_ON() in skb_orphan()

[ Upstream commit 8b74d439e1697110c5e5c600643e823eb1dd0762 ]

It seems nobody used LLC since linux-3.12.

Fortunately fuzzers like syzkaller still know how to run this code,
otherwise it would be no fun.

Setting skb->sk without skb->destructor leads to all kinds of
bugs, we now prefer to be very strict about it.

Ideally here we would use skb_set_owner() but this helper does not exist yet,
only CAN seems to have a private helper for that.

Fixes: 376c7311bdb6 ("net: add a temporary sanity check in skb_orphan()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Disable preemption when doing TC statistics upcall

[ Upstream commit fed06ee89b78d3af32e235e0e89ad0d946fcb95d ]

When called by HW offloading drivers, the TC action (e.g
net/sched/act_mirred.c) code uses this_cpu logic, e.g

 _bstats_cpu_update(this_cpu_ptr(a->cpu_bstats), bytes, packets)

per the kernel documention, preemption should be disabled, add that.

Before the fix, when running with CONFIG_PREEMPT set, we get a

BUG: using smp_processor_id() in preemptible [00000000] code: tc/3793

asserion from the TC action (mirred) stats_update callback.

Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcm: fix a null pointer dereference in kcm_sendmsg()

[ Upstream commit cd27b96bc13841ee7af25837a6ae86fee87273d6 ]

In commit 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()")
I tried to avoid skb allocation for 0-length case, but missed
a check for NULL pointer in the non EOR case.

Fixes: 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcm: fix 0-length case for kcm_sendmsg()

[ Upstream commit 98e3862ca2b1ae595a13805dcab4c3a6d7718f4d ]

Dmitry reported a kernel warning:

 WARNING: CPU: 3 PID: 2936 at net/kcm/kcmsock.c:627
 kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
 CPU: 3 PID: 2936 Comm: a.out Not tainted 4.10.0-rc6+ #209
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 Call Trace:
  __dump_stack lib/dump_stack.c:15 [inline]
  dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
  panic+0x1fb/0x412 kernel/panic.c:179
  __warn+0x1c4/0x1e0 kernel/panic.c:539
  warn_slowpath_null+0x2c/0x40 kernel/panic.c:582
  kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
  kcm_sendmsg+0x163a/0x2200 net/kcm/kcmsock.c:1029
  sock_sendmsg_nosec net/socket.c:635 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:645
  sock_write_iter+0x326/0x600 net/socket.c:848
  new_sync_write fs/read_write.c:499 [inline]
  __vfs_write+0x483/0x740 fs/read_write.c:512
  vfs_write+0x187/0x530 fs/read_write.c:560
  SYSC_write fs/read_write.c:607 [inline]
  SyS_write+0xfb/0x230 fs/read_write.c:599
  entry_SYSCALL_64_fastpath+0x1f/0xc2

when calling syscall(__NR_write, sock2, 0x208aaf27ul, 0x0ul) on a KCM
seqpacket socket. It appears that kcm_sendmsg() does not handle len==0
case correctly, which causes an empty skb is allocated and queued.
Fix this by skipping the skb allocation for len==0 case.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.12

videodev2.h: go back to limited range Y'CbCr for SRGB and, ADOBERGB

commit 35879ee4769099905fa3bda0b21e73d434e2df6a upstream.

This reverts 'commit 7e0739cd9c40 ("[media] videodev2.h: fix
sYCC/AdobeYCC default quantization range").

The problem is that many drivers can convert R'G'B' content (often
from sensors) to Y'CbCr, but they all produce limited range Y'CbCr.

To stay backwards compatible the default quantization range for
sRGB and AdobeRGB Y'CbCr encoding should be limited range, not full
range, even though the corresponding standards specify full range.

Update the V4L2_MAP_QUANTIZATION_DEFAULT define accordingly and
also update the documentation.

Fixes: 7e0739cd9c40 ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range")
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: Make gc wakeup sane, remove set_task_state()

commit be628be09563f8f6e81929efbd7cf3f45c344416 upstream.

Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb_transport: Pick an unused queue

commit 8fcd0950c021d7be8493280541332b924b9de962 upstream.

Fix typo causing ntb_transport_create_queue to select the first
queue every time, instead of using the next free queue.

Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntb: ntb_perf missing dmaengine_unmap_put

commit 9644347c5240d0ee3ba7472ef332aaa4ff4db398 upstream.

In the normal I/O execution path, ntb_perf is missing a call to
dmaengine_unmap_put() after submission. That causes us to leak
unmap objects.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 8a7b6a77 ("ntb: ntb perf tool")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NTB: ntb_transport: fix debugfs_remove_recursive

commit dd62245e73de9138333cb0e7a42c8bc1215c3ce6 upstream.

The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level
directory must not be later than
debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory.
Otherwise, the sub-level directory will not exist, and it would be
invalid (panic) to attempt to remove it.  This removes the top-level
directory last, after sub-level directories have been cleaned up.

Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timekeeping: Use deferred printk() in debug code

commit f222449c9dfad7c9bb8cb53e64c5c407b172ebbc upstream.

We cannot do printk() from tk_debug_account_sleep_time(), because
tk_debug_account_sleep_time() is called under tk_core seq lock.
The reason why printk() is unsafe there is that console_sem may
invoke scheduler (up()->wake_up_process()->activate_task()), which,
in turn, can return back to timekeeping code, for instance, via
get_time()->ktime_get(), deadlocking the system on tk_core seq lock.

[   48.950592] ======================================================
[   48.950622] [ INFO: possible circular locking dependency detected ]
[   48.950622] 4.10.0-rc7-next-20170213+ #101 Not tainted
[   48.950622] -------------------------------------------------------
[   48.950622] kworker/0:0/3 is trying to acquire lock:
[   48.950653]  (tk_core){----..}, at: [<c01cc624>] retrigger_next_event+0x4c/0x90
[   48.950683]
               but task is already holding lock:
[   48.950683]  (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90
[   48.950714]
               which lock already depends on the new lock.

[   48.950714]
               the existing dependency chain (in reverse order) is:
[   48.950714]
               -> #5 (hrtimer_bases.lock){-.-...}:
[   48.950744]        _raw_spin_lock_irqsave+0x50/0x64
[   48.950775]        lock_hrtimer_base+0x28/0x58
[   48.950775]        hrtimer_start_range_ns+0x20/0x5c8
[   48.950775]        __enqueue_rt_entity+0x320/0x360
[   48.950805]        enqueue_rt_entity+0x2c/0x44
[   48.950805]        enqueue_task_rt+0x24/0x94
[   48.950836]        ttwu_do_activate+0x54/0xc0
[   48.950836]        try_to_wake_up+0x248/0x5c8
[   48.950836]        __setup_irq+0x420/0x5f0
[   48.950836]        request_threaded_irq+0xdc/0x184
[   48.950866]        devm_request_threaded_irq+0x58/0xa4
[   48.950866]        omap_i2c_probe+0x530/0x6a0
[   48.950897]        platform_drv_probe+0x50/0xb0
[   48.950897]        driver_probe_device+0x1f8/0x2cc
[   48.950897]        __driver_attach+0xc0/0xc4
[   48.950927]        bus_for_each_dev+0x6c/0xa0
[   48.950927]        bus_add_driver+0x100/0x210
[   48.950927]        driver_register+0x78/0xf4
[   48.950958]        do_one_initcall+0x3c/0x16c
[   48.950958]        kernel_init_freeable+0x20c/0x2d8
[   48.950958]        kernel_init+0x8/0x110
[   48.950988]        ret_from_fork+0x14/0x24
[   48.950988]
               -> #4 (&rt_b->rt_runtime_lock){-.-...}:
[   48.951019]        _raw_spin_lock+0x40/0x50
[   48.951019]        rq_offline_rt+0x9c/0x2bc
[   48.951019]        set_rq_offline.part.2+0x2c/0x58
[   48.951049]        rq_attach_root+0x134/0x144
[   48.951049]        cpu_attach_domain+0x18c/0x6f4
[   48.951049]        build_sched_domains+0xba4/0xd80
[   48.951080]        sched_init_smp+0x68/0x10c
[   48.951080]        kernel_init_freeable+0x160/0x2d8
[   48.951080]        kernel_init+0x8/0x110
[   48.951080]        ret_from_fork+0x14/0x24
[   48.951110]
               -> #3 (&rq->lock){-.-.-.}:
[   48.951110]        _raw_spin_lock+0x40/0x50
[   48.951141]        task_fork_fair+0x30/0x124
[   48.951141]        sched_fork+0x194/0x2e0
[   48.951141]        copy_process.part.5+0x448/0x1a20
[   48.951171]        _do_fork+0x98/0x7e8
[   48.951171]        kernel_thread+0x2c/0x34
[   48.951171]        rest_init+0x1c/0x18c
[   48.951202]        start_kernel+0x35c/0x3d4
[   48.951202]        0x8000807c
[   48.951202]
               -> #2 (&p->pi_lock){-.-.-.}:
[   48.951232]        _raw_spin_lock_irqsave+0x50/0x64
[   48.951232]        try_to_wake_up+0x30/0x5c8
[   48.951232]        up+0x4c/0x60
[   48.951263]        __up_console_sem+0x2c/0x58
[   48.951263]        console_unlock+0x3b4/0x650
[   48.951263]        vprintk_emit+0x270/0x474
[   48.951293]        vprintk_default+0x20/0x28
[   48.951293]        printk+0x20/0x30
[   48.951324]        kauditd_hold_skb+0x94/0xb8
[   48.951324]        kauditd_thread+0x1a4/0x56c
[   48.951324]        kthread+0x104/0x148
[   48.951354]        ret_from_fork+0x14/0x24
[   48.951354]
               -> #1 ((console_sem).lock){-.....}:
[   48.951385]        _raw_spin_lock_irqsave+0x50/0x64
[   48.951385]        down_trylock+0xc/0x2c
[   48.951385]        __down_trylock_console_sem+0x24/0x80
[   48.951385]        console_trylock+0x10/0x8c
[   48.951416]        vprintk_emit+0x264/0x474
[   48.951416]        vprintk_default+0x20/0x28
[   48.951416]        printk+0x20/0x30
[   48.951446]        tk_debug_account_sleep_time+0x5c/0x70
[   48.951446]        __timekeeping_inject_sleeptime.constprop.3+0x170/0x1a0
[   48.951446]        timekeeping_resume+0x218/0x23c
[   48.951477]        syscore_resume+0x94/0x42c
[   48.951477]        suspend_enter+0x554/0x9b4
[   48.951477]        suspend_devices_and_enter+0xd8/0x4b4
[   48.951507]        enter_state+0x934/0xbd4
[   48.951507]        pm_suspend+0x14/0x70
[   48.951507]        state_store+0x68/0xc8
[   48.951538]        kernfs_fop_write+0xf4/0x1f8
[   48.951538]        __vfs_write+0x1c/0x114
[   48.951538]        vfs_write+0xa0/0x168
[   48.951568]        SyS_write+0x3c/0x90
[   48.951568]        __sys_trace_return+0x0/0x10
[   48.951568]
               -> #0 (tk_core){----..}:
[   48.951599]        lock_acquire+0xe0/0x294
[   48.951599]        ktime_get_update_offsets_now+0x5c/0x1d4
[   48.951629]        retrigger_next_event+0x4c/0x90
[   48.951629]        on_each_cpu+0x40/0x7c
[   48.951629]        clock_was_set_work+0x14/0x20
[   48.951660]        process_one_work+0x2b4/0x808
[   48.951660]        worker_thread+0x3c/0x550
[   48.951660]        kthread+0x104/0x148
[   48.951690]        ret_from_fork+0x14/0x24
[   48.951690]
               other info that might help us debug this:

[   48.951690] Chain exists of:
                 tk_core --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock

[   48.951721]  Possible unsafe locking scenario:

[   48.951721]        CPU0                    CPU1
[   48.951721]        ----                    ----
[   48.951721]   lock(hrtimer_bases.lock);
[   48.951751]                                lock(&rt_b->rt_runtime_lock);
[   48.951751]                                lock(hrtimer_bases.lock);
[   48.951751]   lock(tk_core);
[   48.951782]
                *** DEADLOCK ***

[   48.951782] 3 locks held by kworker/0:0/3:
[   48.951782]  #0:  ("events"){.+.+.+}, at: [<c0156590>] process_one_work+0x1f8/0x808
[   48.951812]  #1:  (hrtimer_work){+.+...}, at: [<c0156590>] process_one_work+0x1f8/0x808
[   48.951843]  #2:  (hrtimer_bases.lock){-.-...}, at: [<c01cc610>] retrigger_next_event+0x38/0x90
[   48.951843]   stack backtrace:
[   48.951873] CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.10.0-rc7-next-20170213+
[   48.951904] Workqueue: events clock_was_set_work
[   48.951904] [<c0110208>] (unwind_backtrace) from [<c010c224>] (show_stack+0x10/0x14)
[   48.951934] [<c010c224>] (show_stack) from [<c04ca6c0>] (dump_stack+0xac/0xe0)
[   48.951934] [<c04ca6c0>] (dump_stack) from [<c019b5cc>] (print_circular_bug+0x1d0/0x308)
[   48.951965] [<c019b5cc>] (print_circular_bug) from [<c019d2a8>] (validate_chain+0xf50/0x1324)
[   48.951965] [<c019d2a8>] (validate_chain) from [<c019ec18>] (__lock_acquire+0x468/0x7e8)
[   48.951995] [<c019ec18>] (__lock_acquire) from [<c019f634>] (lock_acquire+0xe0/0x294)
[   48.951995] [<c019f634>] (lock_acquire) from [<c01d0ea0>] (ktime_get_update_offsets_now+0x5c/0x1d4)
[   48.952026] [<c01d0ea0>] (ktime_get_update_offsets_now) from [<c01cc624>] (retrigger_next_event+0x4c/0x90)
[   48.952026] [<c01cc624>] (retrigger_next_event) from [<c01e4e24>] (on_each_cpu+0x40/0x7c)
[   48.952056] [<c01e4e24>] (on_each_cpu) from [<c01cafc4>] (clock_was_set_work+0x14/0x20)
[   48.952056] [<c01cafc4>] (clock_was_set_work) from [<c015664c>] (process_one_work+0x2b4/0x808)
[   48.952087] [<c015664c>] (process_one_work) from [<c0157774>] (worker_thread+0x3c/0x550)
[   48.952087] [<c0157774>] (worker_thread) from [<c015d644>] (kthread+0x104/0x148)
[   48.952087] [<c015d644>] (kthread) from [<c0107830>] (ret_from_fork+0x14/0x24)

Replace printk() with printk_deferred(), which does not call into
the scheduler.

Fixes: 0bf43f15db85 ("timekeeping: Prints the amounts of time spent during suspend")
Reported-and-tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: use rcuidle console tracepoint

commit fc98c3c8c9dcafd67adcce69e6ce3191d5306c9c upstream.

Use rcuidle console tracepoint because, apparently, it may be issued
from an idle CPU:

  hw-breakpoint: Failed to enable monitor mode on CPU 0.
  hw-breakpoint: CPU 0 failed to disable vector catch

  ===============================
  [ ERR: suspicious RCU usage.  ]
  4.10.0-rc8-next-20170215+ #119 Not tainted
  -------------------------------
  ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  RCU used illegally from idle CPU!
  rcu_scheduler_active = 2, debug_locks = 0
  RCU used illegally from extended quiescent state!
  2 locks held by swapper/0/0:
   #0:  (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
   #1:  (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
  Hardware name: Generic OMAP4 (Flattened Device Tree)
    console_unlock
    vprintk_emit
    vprintk_default
    printk
    reset_ctrl_regs
    dbg_cpu_pm_notify
    notifier_call_chain
    cpu_pm_exit
    omap_enter_idle_coupled
    cpuidle_enter_state
    cpuidle_enter_state_coupled
    do_idle
    cpu_startup_entry
    start_kernel

This RCU warning, however, is suppressed by lockdep_off() in printk().
lockdep_off() increments the ->lockdep_recursion counter and thus
disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want
lockdep to be enabled "current->lockdep_recursion == 0".

Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/PME: Restore pcie_pme_driver.remove

commit afe3e4d11bdf50a4c3965eb6465ba6bebbcf5dcf upstream.

In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make
explicitly non-modular") removed the pcie_pme_driver .remove() method,
pcie_pme_remove().

pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe().
The fact that we don't free the IRQ after d7def2040077 causes the following
crash when removing a PCIe port device via /sys:

  ------------[ cut here ]------------
  kernel BUG at drivers/pci/msi.c:370!
  invalid opcode: 0000 [#1] SMP
  Modules linked in:
  CPU: 1 PID: 14509 Comm: sh Tainted: G    W  4.8.0-rc1-yh-00012-gd29438d
  RIP: 0010:[<ffffffff9758bbf5>]  free_msi_irqs+0x65/0x190
  ...
  Call Trace:
   [<ffffffff9758cda4>] pci_disable_msi+0x34/0x40
   [<ffffffff97583817>] cleanup_service_irqs+0x27/0x30
   [<ffffffff97583e9a>] pcie_port_device_remove+0x2a/0x40
   [<ffffffff97584250>] pcie_portdrv_remove+0x40/0x50
   [<ffffffff97576d7b>] pci_device_remove+0x4b/0xc0
   [<ffffffff9785ebe6>] __device_release_driver+0xb6/0x150
   [<ffffffff9785eca5>] device_release_driver+0x25/0x40
   [<ffffffff975702e4>] pci_stop_bus_device+0x74/0xa0
   [<ffffffff975704ea>] pci_stop_and_remove_bus_device_locked+0x1a/0x30
   [<ffffffff97578810>] remove_store+0x50/0x70
   [<ffffffff9785a378>] dev_attr_store+0x18/0x30
   [<ffffffff97260b64>] sysfs_kf_write+0x44/0x60
   [<ffffffff9725feae>] kernfs_fop_write+0x10e/0x190
   [<ffffffff971e13f8>] __vfs_write+0x28/0x110
   [<ffffffff970b0fa4>] ? percpu_down_read+0x44/0x80
   [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0
   [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0
   [<ffffffff971e1f04>] vfs_write+0xc4/0x180
   [<ffffffff971e3089>] SyS_write+0x49/0xa0
   [<ffffffff97001a46>] do_syscall_64+0xa6/0x1b0
   [<ffffffff9819201e>] entry_SYSCALL64_slow_path+0x25/0x25
  ...
   RIP  [<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190
   RSP <ffff89ad3085bc48>
  ---[ end trace f4505e1dac5b95d3 ]---
  Segmentation fault

Restore pcie_pme_remove().

[bhelgaas: changelog]
Fixes: d7def2040077 ("PCI/PME: Make explicitly non-modular")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "i2c: designware: detect when dynamic tar update is possible"

commit 12688dc21f71f4dcc9e2b8b5556b0c6cc8df1491 upstream.

This reverts commit 63d0f0a6952a1a02bc4f116b7da7c7887e46efa3.

It caused a regression on platforms where I2C controller is synthesized
with dynamic TAR update disabled. Detection code is testing is bit
DW_IC_CON_10BITADDR_MASTER in register DW_IC_CON read-only but fails to
restore original value in case bit is read-write.

Instead of fixing this we revert the commit since it was preparation for
the commit 0317e6c0f1dc ("i2c: designware: do not disable adapter after
transfer") which was also reverted.

Reported-by: Shah Nehal-Bakulchandra <Nehal-bakulchandra.Shah@amd.com>
Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: 63d0f0a6952a ("i2c: designware: detect when dynamic tar update is possible")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()

commit 9e3440481845b2ec22508f60837ee2cab2b6054f upstream.

The 64-bit get_user() wasn't clearing the high word due to a typo in the
error handler. The exception handler entry was already correct, though.
Noticed during recent usercopy test additions in lib/test_user_copy.c.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Move futex_init() to core_initcall

commit 25f71d1c3e98ef0e52371746220d66458eac75bc upstream.

The UEVENT user mode helper is enabled before the initcalls are executed
and is available when the root filesystem has been mounted.

The user mode helper is triggered by device init calls and the executable
might use the futex syscall.

futex_init() is marked __initcall which maps to device_initcall, but there
is no guarantee that futex_init() is invoked _before_ the first device init
call which triggers the UEVENT user mode helper.

If the user mode helper uses the futex syscall before futex_init() then the
syscall crashes with a NULL pointer dereference because the futex subsystem
has not been initialized yet.

Move futex_init() to core_initcall so futexes are initialized before the
root filesystem is mounted and the usermode helper becomes available.

[ tglx: Rewrote changelog ]

Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: jiang.biao2@zte.com.cn
Cc: jiang.zhengxiong@zte.com.cn
Cc: zhong.weidong@zte.com.cn
Cc: deng.huali@zte.com.cn
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cn
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/dp/mst: fix kernel oops when turning off secondary monitor

commit bb08c04dc867b5f392caec635c097d5d5fcd8c9f upstream.

100% reproducible issue found on SKL SkullCanyon NUC with two external
DP daisy-chained monitors in DP/MST mode. When turning off or changing
the input of the second monitor the machine stops with a kernel
oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly.

This issue is traced to an inconsistent control flow in
drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the
same time as 'req_payload.num_slots' is set to zero, but the pointer is
dereferenced even when req_payload.num_slot is zero.

The problematic dereference was introduced in commit dfda0df34
("drm/mst: rework payload table allocation to conform better") and may
impact all versions since v3.18

The fix suggested by Chris Wilson removes the kernel oops and was found to
work well after 10mn of monkey-testing with the second monitor power and
input buttons

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990
Fixes: dfda0df34264 ("drm/mst: rework payload table allocation to conform better.")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor

commit d74c67dd7800fc7aae381f272875c337f268806c upstream.

The crtc_h/vdisplay fields may not match the CRTC viewport dimensions
with special modes such as interlaced ones.

Fixes the HW cursor disappearing in the bottom half of the screen with
interlaced modes.

Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds")
Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0605 to the ACPI table

commit 722c5ac708b4f5c1fcfad5fed4c95234c8b06590 upstream.

ELAN0605 has been confirmed to be a variant of ELAN0600, which is
blacklisted in the hid-core to be managed by elan_i2c. This device can be
found in Lenovo ideapad 310s (80U4000).

Signed-off-by: Hiroka IHARA <ihara_h@live.jp>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix missing sanity check in /dev/sg

commit 137d01df511b3afe1f05499aea05f3bafc0fb221 upstream.

What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len.  Or with ->dxferp pointing
to an array full of empty iovecs.

Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...

Found by Dmitry Vyukov and syzkaller.

[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
  underlying issue.  - Linus ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: don't BUG_ON() empty DMA transfers

commit fd3fc0b4d7305fa7246622dcc0dec69c42443f45 upstream.

Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.

Found by Dmitry Vyukov and syzkaller.

[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
  cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
  might still be a cause of excessive log spamming.

  NOTE! If this warning ever triggers, we may end up leaking resources,
  since this doesn't bother to try to clean the command up. So this
  WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
  much worse.

  People really need to stop using BUG_ON() for "this shouldn't ever
  happen". It makes pretty much any bug worse.     - Linus ]

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64: Disable use of radix under a hypervisor

commit 3f91a89d424a79f8082525db5a375e438887bb3e upstream.

Currently, if the kernel is running on a POWER9 processor under a
hypervisor, it may try to use the radix MMU even though it doesn't have
the necessary code to do so (it doesn't negotiate use of radix, and it
doesn't do the H_REGISTER_PROC_TBL hcall).  If the hypervisor supports
both radix and HPT, then it will set up the guest to use HPT (since the
guest doesn't request radix in the CAS call), but if the radix feature
bit is set in the ibm,pa-features property (which is valid, since
ibm,pa-features is defined to represent the capabilities of the
processor) the guest will try to use radix, resulting in a crash when
it turns the MMU on.

This makes the minimal fix for the current code, which is to disable
radix unless we are running in hypervisor mode.

Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: fix multi-bit bus width without high-speed mode

commit 3d4ef329757cfd5e0b23cce97cdeca7e2df89c99 upstream.

Commit 577fb13199b1 ("mmc: rework selection of bus speed mode")
refactored bus width selection code to mmc_select_bus_width().

However, it also altered the behavior to not call the selection code in
non-high-speed modes anymore.

This causes 1-bit mode to always be used when the high-speed mode is not
enabled, even though 4-bit and 8-bit bus are valid bus widths in the
backwards-compatibility (legacy) mode as well (see e.g. 5.3.2 Bus Speed
Modes in JEDEC 84-B50). This results in a significant regression in
transfer speeds.

Fix the code to allow 4-bit and 8-bit widths even without high-speed
mode, as before.

Tested with a Zynq-7000 PicoZed 7020 board.

Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix uninitialized flags in pipe_buffer

commit 84588a93d097bace24b9233930f82511d4f34210 upstream.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>