OSDN Git Service
Andrew Lunn [Thu, 25 May 2017 19:42:08 +0000 (21:42 +0200)]
net: phy: marvell: Uniform page names
Bring all the page names together, remove the repeats, and make them
uniform.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 25 May 2017 19:42:07 +0000 (21:42 +0200)]
net: phy: marvell: helper to get and set page
There is a common pattern of first reading the currently selected page
and then changing to another page. Add a helper to do this.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 25 May 2017 19:42:06 +0000 (21:42 +0200)]
net: phy: marvell: More hidden page changes refactored
EXT_ADDR_PAGE is the same meaning as MII_MARVELL_PHY_PAGE, i.e. change
page. Replace it will calls to the helpers.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 25 May 2017 19:42:05 +0000 (21:42 +0200)]
net: phy: marvell: #defines for copper and fibre pages
Replace magic numbers for PHY pages with symbolic names.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prasad Kanneganti [Thu, 25 May 2017 17:54:29 +0000 (10:54 -0700)]
liquidio: fix inaccurate count of napi-processed rx packets reported to Octeon
lio_enable_irq (called by napi poll) is reporting to Octeon an inaccurate
count of processed rx packets causing Octeon to eventually stop forwarding
packets to the host. Fix it by using this formula for an accurate count:
processed rx packets = droq->pkt_count - droq->pkts_pending
Also increase SOFT_COMMAND_BUFFER_SIZE to match what the firmware expects.
Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prasad Kanneganti [Thu, 25 May 2017 17:42:14 +0000 (10:42 -0700)]
liquidio: fix rare pci_driver.probe failure of VF driver
There's a rare pci_driver.probe failure of the VF driver that's caused by
PF/VF handshake going out of sync. The culprit is octeon_mbox_write() who
ignores an ack timeout condition; it just keeps unconditionally writing all
elements of mbox_cmd->data[] even when the other side is not ready for
them. Fix it by making each write of mbox_cmd->data[i] conditional to
having previously received an ack.
Also fix the octeon_mbox_state enum such that each state gets a unique
value. Also add ULL suffix to numeric literals in macro definitions.
Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 May 2017 18:37:42 +0000 (14:37 -0400)]
Merge branch 'phy-sysfs-reciprocal-links'
Florian Fainelli says:
====================
net: phy: Create sysfs reciprocal links for attached_dev/phydev
This patch series addresses a device topology shortcoming where a program
scanning /sys would not be able to establish a mapping between the network
device and the PHY device.
In the process it turned out that no PHY device documentation existed for
sysfs attributes.
Changes in v2:
- document possible phy_interface values in sysfs-class-net-phydev
====================
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 25 May 2017 16:21:43 +0000 (09:21 -0700)]
net: sysfs: Document PHY device sysfs attributes
Document the different sysfs attributes that exist for PHY devices:
attached_dev, phy_has_fixups, phy_id and phy_interface.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 25 May 2017 16:21:42 +0000 (09:21 -0700)]
net: sysfs: Document "phydev" symbolic link
Now that we link the network device to its PHY device, document this
sysfs symbolic link.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 25 May 2017 16:21:41 +0000 (09:21 -0700)]
net: phy: Create sysfs reciprocal links for attached_dev/phydev
There is currently no way for a program scanning /sys to know whether a
network device is attached to a particular PHY device, just like the PHY
device is not pointed back to its attached network device.
Create a symbolic link in the network device's namespace named "phydev"
which points to the PHY device and create a symbolic link in the PHY
device's namespace named "attached_dev" that points back to the network
device. These links are set up during phy_attach_direct() and removed
during phy_detach() for symetry.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 May 2017 18:12:52 +0000 (14:12 -0400)]
Merge branch 'RTM_GETROUTE--return-fib-result'
Roopa Prabhu says:
====================
net: extend RTM_GETROUTE to return fib result
This series adds a new RTM_F_FIB_MATCH flag to return matched fib result
with RTM_GETROUTE. This is useful for applications and protocols in
userspace wanting to query the selected route.
examples (with patched iproute2):
ipv4:
----
$ip route show
default via 192.168.0.2 dev eth0
10.0.14.0/24
nexthop via 172.16.0.3 dev dummy0 weight 1
nexthop via 172.16.1.3 dev dummy1 weight 1
$ip route get 10.0.14.2
10.0.14.2 via 172.16.1.3 dev dummy1 src 172.16.1.1
cache
$ip route get fibmatch 10.0.14.2
10.0.14.0/24
nexthop via 172.16.0.3 dev dummy0 weight 1
nexthop via 172.16.1.3 dev dummy1 weight 1
ipv6:
----
$ip -6 route show
2001:db9:100::/120 metric 1024
nexthop via 2001:db8:2::2 dev dummy0 weight 1
nexthop via 2001:db8:12::2 dev dummy1 weight 1
$ip -6 route get 2001:db9:100::1
2001:db9:100::1 from :: via 2001:db8:12::2 dev dummy1 src 2001:db8:12::1 metric 1024 pref medium
$ip -6 route get fibmatch 2001:db9:100::1
2001:db9:100::/120 metric 1024
nexthop via 2001:db8:12::2 dev dummy1 weight 1
nexthop via 2001:db8:2::2 dev dummy0 weight 1
v2:
- pick up new forward port of patch-01 from david
- inet6_rtm_getroute: use container_of for rt6_info to
dst conversion
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Thu, 25 May 2017 17:42:40 +0000 (10:42 -0700)]
net: ipv6: RTM_GETROUTE: return matched fib result when requested
This patch adds support to return matched fib result when RTM_F_FIB_MATCH
flag is specified in RTM_GETROUTE request. This is useful for user-space
applications/controllers wanting to query a matching route.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Thu, 25 May 2017 17:42:39 +0000 (10:42 -0700)]
net: ipv4: RTM_GETROUTE: return matched fib result when requested
This patch adds support to return matched fib result when RTM_F_FIB_MATCH
flag is specified in RTM_GETROUTE request. This is useful for user-space
applications/controllers wanting to query a matching route.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Thu, 25 May 2017 17:42:38 +0000 (10:42 -0700)]
net: ipv4: add new RTM_F_FIB_MATCH flag for use with RTM_GETROUTE
This flag when specified will return matched fib result in
response to a RTM_GETROUTE query.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 25 May 2017 17:42:37 +0000 (10:42 -0700)]
net: ipv4: Save trie prefix to fib lookup result
Prefix is needed for returning matching route spec on get route request.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 25 May 2017 17:42:36 +0000 (10:42 -0700)]
net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup
Convert inet_rtm_getroute to use ip_route_input_rcu and
ip_route_output_key_hash_rcu passing the fib_result arg to both.
The rcu lock is held through the creation of the response, so the
rtable/dst does not need to be attached to the skb and is passed
to rt_fill_info directly.
In converting from ip_route_output_key to ip_route_output_key_hash_rcu
the xfrm_lookup_route in ip_route_output_flow is dropped since
flowi4_proto is not set for a route get request.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 25 May 2017 17:42:35 +0000 (10:42 -0700)]
net: ipv4: Remove event arg to rt_fill_info
rt_fill_info has 1 caller with the event set to RTM_NEWROUTE. Given that
remove the arg and use RTM_NEWROUTE directly in rt_fill_info.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 25 May 2017 17:42:34 +0000 (10:42 -0700)]
net: ipv4: refactor ip_route_input_noref
A later patch wants access to the fib result on an input route lookup
with the rcu lock held. Refactor ip_route_input_noref pushing the logic
between rcu_read_lock ... rcu_read_unlock into a new helper that takes
the fib_result as an input arg.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 25 May 2017 17:42:33 +0000 (10:42 -0700)]
net: ipv4: refactor __ip_route_output_key_hash
A later patch wants access to the fib result on an output route lookup
with the rcu lock held. Refactor __ip_route_output_key_hash, pushing
the logic between rcu_read_lock ... rcu_read_unlock into a new helper
with the fib_result as an input arg.
To keep the name length under control remove the leading underscores
from the name and add _rcu to the name of the new helper indicating it
is called with the rcu read lock held.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 26 May 2017 15:01:50 +0000 (11:01 -0400)]
Merge branch 'nfp-devlink-port-implementation'
Jakub Kicinski says:
====================
nfp: devlink port implementation
This series adds basic devlink support. The operations we can perform
are port show and port split/unsplit.
v2:
Register devlink first, and then register all the ports. Port {,un}split
searches the port list, which is protected by a mutex. If port split
is requested before ports are registered we will simply not find the port
and return -EINVAL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 26 May 2017 08:03:36 +0000 (01:03 -0700)]
nfp: support port splitting via devlink
Add support for configuring port split with devlink. Add devlink
callbacks to validate requested config and call NSP helpers.
Getting the right nfp_port structure can be done with simple iteration.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 26 May 2017 08:03:35 +0000 (01:03 -0700)]
nfp: calculate total port lanes for split
For port splitting we will need to know the total number of lanes
in a port. Calculate that based on eth_table information.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 26 May 2017 08:03:34 +0000 (01:03 -0700)]
nfp: register ports as devlink ports
Extend nfp_port to contain devlink_port structures. Register the
ports to allow users inspecting device ports.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 26 May 2017 08:03:33 +0000 (01:03 -0700)]
nfp: add helper for cleaning up vNICs
We will soon have to invoke more clean up for vNICs.
Move the cleanup callbacks into a helper.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Fri, 26 May 2017 08:03:32 +0000 (01:03 -0700)]
nfp: add devlink support
Add initial devlink support. This patch simply switches allocation
of per-adapter structure to devlink's priv and register devlink
with empty ops table. See following patches for implementation
of particular ops.
We should now clear the app pointer on exit, this is how devlink
callbacks will know app is not initialized.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 26 May 2017 08:03:31 +0000 (01:03 -0700)]
nfp: move mutex init out of net code
Move mutex init to main file close to structure allocation.
This will allow mutex to be taken before net code runs (e.g.
from devlink callbacks). While at it remember to destroy
the mutex.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 May 2017 21:46:23 +0000 (17:46 -0400)]
Merge branch 'mlxsw-Support-firmware-flash'
Jiri Pirko says:
====================
mlxsw: Support firmware flash
Add support for device firmware flash on mlxsw spectrum. The firmware files
are expected to be in the Mellanox Firmware Archive version 2 (MFA2)
format.
The firmware flash is triggered on driver initialization time if the device
firmware version does not meet the minimum firmware version supported by
the driver.
Currently, to activate the newly flashed firmware, the user needs to
reboot his system.
The first patch introduces the mlxfw module, which implements common logic
needed for the firmware flash process on Mellanox products, such as the
MFA2 format parsing and the firmware flash state machine logic. As the
module implements common logic which will be needed by various different
Mellanox drivers, it defines a set of callbacks needed to interact with the
specific device.
Patches 1-5 implement the needed mlxfw callbacks in the mlxsw spectrum
driver.
Patches 6 and 7 add boot-time firmware upgrade on the mlxsw spectrum
driver.
Patch 8 adds a fix needed for new firmware versions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 23 May 2017 19:56:30 +0000 (21:56 +0200)]
mlxsw: spectrum_router: Adjust RIF configuration for new firmware versions
In new firmware versions, when configuring a {Port, VID} as a router
interface, the driver is responsible for enabling the STP filter and
disabling learning. Otherwise, packets are discarded.
This change doesn't break existing firmware versions, but is required
for newer firmware versions.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 23 May 2017 19:56:29 +0000 (21:56 +0200)]
mlxsw: spectrum: Validate firmware revision on init
Make the spectrum module check the current device firmware version, and if
it is below the supported version, use the libfirmware API to request a
firmware file with the supported firmware version and flash it to the
device using the mlxfw module.
The firmware file names are expected to be of Mellanox Firmware Archive
version 2 (MFA2) format and their name are expected to be in the following
pattern: "mlxsw_spectrum-<major>.<minor>.<sub-minor>.mfa2".
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 23 May 2017 19:56:28 +0000 (21:56 +0200)]
mlxsw: core: Create the mlxsw_fw_rev struct
This struct was previously an anonymous struct defined inside the
mlxsw_bus_info struct. Extract it to a struct named mlxsw_fw_rev, as it
will be needed later by the spectrum driver.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 23 May 2017 19:56:27 +0000 (21:56 +0200)]
mlxsw: spectrum: Add the needed callbacks for mlxfw integration
The mlxfw module defines several needed callbacks in order to flash the
device's firmware. As the mlxfw module is shared between several different
drivers, those callbacks are the glue functionality that is responsible
for hardware interaction. Add those callbacks using the MCQI, MCC, MCDA
registers.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 23 May 2017 19:56:26 +0000 (21:56 +0200)]
mlxsw: reg: Add Management Component Data Access register
The MCDA register allows reading and writing a firmware component.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 23 May 2017 19:56:25 +0000 (21:56 +0200)]
mlxsw: reg: Add Management Component Control register
The MCC register allows controlling and querying the firmware flash state
machine (FSM).
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 23 May 2017 19:56:24 +0000 (21:56 +0200)]
mlxsw: reg: Add Management Component Query Information register
The MCQI register queries information about firmware components. It will
be needed by the mlxfw module to query various options about the
components, such as their max size, alignment and max write size.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Tue, 23 May 2017 19:56:23 +0000 (21:56 +0200)]
Add the mlxfw module for Mellanox firmware flash process
The mlxfw module is in charge of common logic needed to flash Mellanox
devices firmware, which consists of:
- Parse the Mellanox Firmware Archive version 2 (MFA2) format, which is
the format used to store the Mellanox firmware. The MFA2 format file can
hold firmware for many different silicon variants, differentiated by a
unique ID called PSID. In addition, the MFA2 file data section is
compressed using xz compression to save both file-system space and
memory at extraction time.
- Implement the firmware flash state machine logic, which is a common
logic for Mellanox products needed to flash the firmware to the device.
As the module is shared between different Mellanox products, it defines a
set of callbacks to be implemented by the specific driver for hardware
interaction.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 May 2017 18:44:50 +0000 (14:44 -0400)]
Merge branch 'be2net-next'
Suresh Reddy says:
====================
be2net: patch-set
Hi Dave, Please consider applying these two patches to net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Suresh Reddy [Thu, 25 May 2017 02:24:39 +0000 (22:24 -0400)]
be2net: Update the driver version to 11.4.0.0
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suresh Reddy [Thu, 25 May 2017 02:24:38 +0000 (22:24 -0400)]
be2net: Fix UE detection logic for BE3
On certain platforms BE3 chips may indicate spurious UEs (unrecoverable
error). Because of the UE detection logic was disabled in the driver
for BE3 chips. Because of this, even in cases of a real UE,
a failover will not occur. This patch re-enables UE detection on BE3
and if a UE is detected, reads the POST register. If the POST register,
reports either a FAT_LOG_STATE or a ARMFW_UE, then it means that a valid
UE occurred in the chip.
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Wed, 24 May 2017 16:02:32 +0000 (17:02 +0100)]
rxrpc: Support network namespacing
Support network namespacing in AF_RXRPC with the following changes:
(1) All the local endpoint, peer and call lists, locks, counters, etc. are
moved into the per-namespace record.
(2) All the connection tracking is moved into the per-namespace record
with the exception of the client connection ID tree, which is kept
global so that connection IDs are kept unique per-machine.
(3) Each namespace gets its own epoch. This allows each network namespace
to pretend to be a separate client machine.
(4) The /proc/net/rxrpc_xxx files are now called /proc/net/rxrpc/xxx and
the contents reflect the namespace.
fs/afs/ should be okay with this patch as it explicitly requires the current
net namespace to be init_net to permit a mount to proceed at the moment. It
will, however, need updating so that cells, IP addresses and DNS records are
per-namespace also.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rosen, Rami [Wed, 24 May 2017 15:34:11 +0000 (18:34 +0300)]
net/packet: remove unused parameter in prb_curr_blk_in_use().
This patch removes unused parameter from prb_curr_blk_in_use() method
in net/packet/af_packet.c.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 May 2017 17:08:36 +0000 (13:08 -0400)]
Merge branch 'stmmac-rework-speed-selection'
Corentin Labbe says:
====================
net-next: stmmac: rework the speed selection
The current stmmac_adjust_link() part which handle speed have
some if (has_platform) code and my dwmac-sun8i will add more of them.
So we need to handle better speed selection.
Moreover the struct link member speed and port are hard to guess their
purpose. And their unique usage are to be combined for writing speed.
My first try was to create an adjust_link() in stmmac_ops but it duplicate some code
The current solution is to have direct value for 10/100/1000 and a mask for them.
The first 4 patchs fix some minor problem found in stmmac_adjust_link() and reported by Florian Fainelli in my previous serie.
The last patch is the real work.
This series is tested on cubieboard2 (dwmac1000) and opipc (dwmac-sun8i).
Changes since v3:
- Added the patch #4 "Convert old_link to bool" as suggested by Joe Perches
- Changed the speedmask
Changes since v2:
- Use true/false for new_state in patch #1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 24 May 2017 07:16:47 +0000 (09:16 +0200)]
net-next: stmmac: rework the speed selection
The current stmmac_adjust_link() part which handle speed have
some if (has_platform) code and my dwmac-sun8i will add more of them.
So we need to handle better speed selection.
Moreover the struct link member speed and port are hard to guess their
purpose. And their unique usage are to be combined for writing speed.
So this patch replace speed/port by simpler
speed10/speed100/speed1000/speed_mask variables.
In dwmac4_core_init and dwmac1000_core_init, port/speed value was used
directly without using the struct link. This patch convert also their
usage to speedxxx.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 24 May 2017 07:16:46 +0000 (09:16 +0200)]
net-next: stmmac: Convert old_link to bool
This patch convert old_link from int to bool since it store only 1 or 0
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 24 May 2017 07:16:45 +0000 (09:16 +0200)]
net-next: stmmac: use SPEED_xxx instead of raw value
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 24 May 2017 07:16:44 +0000 (09:16 +0200)]
net-next: stmmac: Remove unnecessary parenthesis
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LABBE Corentin [Wed, 24 May 2017 07:16:43 +0000 (09:16 +0200)]
net-next: stmmac: Convert new_state to bool
This patch convert new_state from int to bool since it store only 1 or 0
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthias Kaehlcke [Wed, 24 May 2017 00:27:51 +0000 (17:27 -0700)]
net: jme: Remove unused functions
The functions jme_restart_tx_engine(), jme_pause_rx() and
jme_resume_rx() are not used. Removing them fixes the following warnings
when building with clang:
drivers/net/ethernet/jme.c:694:1: error: unused function
'jme_restart_tx_engine' [-Werror,-Wunused-function]
drivers/net/ethernet/jme.c:2393:20: error: unused function
'jme_pause_rx' [-Werror,-Wunused-function]
drivers/net/ethernet/jme.c:2406:20: error: unused function
'jme_resume_rx' [-Werror,-Wunused-function]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 May 2017 16:54:49 +0000 (12:54 -0400)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-05-23
Here's the first Bluetooth & 802.15.4 pull request targeting the 4.13
kernel release.
- Bluetooth 5.0 improvements (Data Length Extensions and alternate PHY)
- Support for new Intel Bluetooth adapter [[8087:0aaa]
- Various fixes to ieee802154 code
- Various fixes to HCI UART code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König [Tue, 23 May 2017 22:26:07 +0000 (00:26 +0200)]
net: phy: put genphy_config_init's EXPORT_SYMBOL directly after the function
Commit
af6b6967d6e1 ("net: phy: export genphy_config_init()") introduced
this EXPORT_SYMBOL and put it after gen10g_soft_reset() instead of
directly after genphy_config_init. Probably this happend when the patch
was applied because http://patchwork.ozlabs.org/patch/339622/ looks ok.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 23 May 2017 22:24:46 +0000 (15:24 -0700)]
tcp: better validation of received ack sequences
Paul Fiterau Brostean reported :
<quote>
Linux TCP stack we analyze exhibits behavior that seems odd to me.
The scenario is as follows (all packets have empty payloads, no window
scaling, rcv/snd window size should not be a factor):
TEST HARNESS (CLIENT) LINUX SERVER
1. - LISTEN (server listen,
then accepts)
2. - --> <SEQ=100><CTL=SYN> --> SYN-RECEIVED
3. - <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED
4. - --> <SEQ=101><ACK=301><CTL=ACK> --> ESTABLISHED
5. - <-- <SEQ=301><ACK=101><CTL=FIN,ACK> <-- FIN WAIT-1 (server
opts to close the data connection calling "close" on the connection
socket)
6. - --> <SEQ=101><ACK=99999><CTL=FIN,ACK> --> CLOSING (client sends
FIN,ACK with not yet sent acknowledgement number)
7. - <-- <SEQ=302><ACK=102><CTL=ACK> <-- CLOSING (ACK is 102
instead of 101, why?)
... (silence from CLIENT)
8. - <-- <SEQ=301><ACK=102><CTL=FIN,ACK> <-- CLOSING
(retransmission, again ACK is 102)
Now, note that packet 6 while having the expected sequence number,
acknowledges something that wasn't sent by the server. So I would
expect
the packet to maybe prompt an ACK response from the server, and then be
ignored. Yet it is not ignored and actually leads to an increase of the
acknowledgement number in the server's retransmission of the FIN,ACK
packet. The explanation I found is that the FIN in packet 6 was
processed, despite the acknowledgement number being unacceptable.
Further experiments indeed show that the server processes this FIN,
transitioning to CLOSING, then on receiving an ACK for the FIN it had
send in packet 5, the server (or better said connection) transitions
from CLOSING to TIME_WAIT (as signaled by netstat).
</quote>
Indeed, tcp_rcv_state_process() calls tcp_ack() but
does not exploit the @acceptable status but for TCP_SYN_RECV
state.
What we want here is to send a challenge ACK, if not in TCP_SYN_RECV
state. TCP_FIN_WAIT1 state is not the only state we should fix.
Add a FLAG_NO_CHALLENGE_ACK so that tcp_rcv_state_process()
can choose to send a challenge ACK and discard the packet instead
of wrongly change socket state.
With help from Neal Cardwell.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Paul Fiterau Brostean <p.fiterau-brostean@science.ru.nl>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 23 May 2017 16:42:37 +0000 (09:42 -0700)]
net_sched: only create filter chains for new filters/actions
tcf_chain_get() always creates a new filter chain if not found
in existing ones. This is totally unnecessary when we get or
delete filters, new chain should be only created for new filters
(or new actions).
Fixes:
5bc1701881e3 ("net: sched: introduce multichain support for filters")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 23 May 2017 07:11:59 +0000 (09:11 +0200)]
net: sched: cls_api: make reclassify return all the way back to the original tp
With the introduction of chain goto action, the reclassification would
cause the re-iteration of the actual chain. It makes more sense to restart
the whole thing and re-iterate starting from the original tp - start
of chain 0.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 May 2017 16:01:22 +0000 (12:01 -0400)]
Merge tag 'mlx5-update-2017-05-23' of git://git./linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-update-2017-05-23
First patch from Leon, came to remove the redundant usage of mlx5_vzalloc,
and directly use kvzalloc across all mlx5 drivers.
2nd patch from Noa, adds new device IDs into the supported devices list.
3rd and 4th patches from Ilan are adding the basic infrastructure and
support for Mellanox's mlx5 FPGA.
Last two patches from Tariq came to modify the outdated driver version
reported in ethtool and in mlx5_ib to more reflect the current driver state
and remove the redundant date string reported in the version.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 23 May 2017 19:38:35 +0000 (12:38 -0700)]
tcp: fix TCP_SYNCNT flakes
After the mentioned commit, some of our packetdrill tests became flaky.
TCP_SYNCNT socket option can limit the number of SYN retransmits.
retransmits_timed_out() has to compare times computations based on
local_clock() while timers are based on jiffies. With NTP adjustments
and roundings we can observe 999 ms delay for 1000 ms timers.
We end up sending one extra SYN packet.
Gimmick added in commit
6fa12c850314 ("Revert Backoff [v3]: Calculate
TCP's connection close threshold as a time value") makes no
real sense for TCP_SYN_SENT sockets where no RTO backoff can happen at
all.
Lets use a simpler logic for TCP_SYN_SENT sockets and remove @syn_set
parameter from retransmits_timed_out()
Fixes:
9a568de4818d ("tcp: switch TCP TS option (RFC 7323) to 1ms clock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Tue, 23 May 2017 19:20:59 +0000 (15:20 -0400)]
net: dsa: support cross-chip ageing time
Now that the switchdev bridge ageing time attribute is propagated to all
switch chips of the fabric, each switch can check if the requested value
is valid and program itself, so that the whole fabric shares a common
ageing time setting.
This is especially needed for switch chips in between others, containing
no bridge port members but evidently used in the data path.
To achieve that, remove the condition which skips the other switches. We
also don't need to identify the target switch anymore, thus remove the
sw_index member of the dsa_notifier_ageing_time_info notifier structure.
On ZII Dev Rev B (with two
88E6352 and one
88E6185) and ZII Dev Rev C
(with two 88E6390X), we have the following hardware configuration:
# ip link add name br0 type bridge
# ip link set master br0 dev lan6
br0: port 1(lan6) entered blocking state
br0: port 1(lan6) entered disabled state
# echo 2000 > /sys/class/net/br0/bridge/ageing_time
Before this patch:
zii-rev-b# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time
300000
300000
15000
zii-rev-c# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time
300000
18750
After this patch:
zii-rev-b# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time
15000
15000
15000
zii-rev-c# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time
18750
18750
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 24 May 2017 20:22:13 +0000 (16:22 -0400)]
Merge branch 'mlxsw-tcpflags'
Jiri Pirko says:
====================
net: add tcp flags match support to flower and offload it
This patch adds support to dissect tcp flags, match on them using
flower classifier and offload such rules to mlxsw Spectrum devices.
v1->v2:
- removed no longer relevant comment from patch 1 as suggested by Or
- sent correct patches this time
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 23 May 2017 16:40:48 +0000 (18:40 +0200)]
mlxsw: spectrum_flower: Add support for tcp flags
Allow to offload rules that contain tcp flags within the mask.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 23 May 2017 16:40:47 +0000 (18:40 +0200)]
mlxsw: spectrum: Add acl block containing tcp flags for ipv4
Add acl block called "ipv4" which contains tcp flags.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 23 May 2017 16:40:46 +0000 (18:40 +0200)]
mlxsw: acl: Add tcp flags acl element
Define new element for tcp flags and place it into scratch area.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 23 May 2017 16:40:45 +0000 (18:40 +0200)]
net/sched: flower: add support for matching on tcp flags
Benefit from the support of tcp flags dissection and allow user to
insert rules matching on tcp flags.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 23 May 2017 16:40:44 +0000 (18:40 +0200)]
net: flow_dissector: add support for dissection of tcp flags
Add support for dissection of tcp flags. Uses similar function call to
tcp dissection function as arp, mpls and others.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 24 May 2017 19:17:22 +0000 (15:17 -0400)]
Merge branch 'qed-next'
Yuval Mintz says:
====================
qed/qede: Mostly-cleanup series
This series contains some cleanup of the qed and qede code:
- #1 contains mostly static/endian changes in order to allow qede to
pass sparse compilation cleanly.
- #2, #5 and #6 are either semantic or remove dead-code from driver.
- #9, #10 and #11 relate to printing and slightly change some APIs
between qed and the protocol drivers for that end [sharing the
interface names and information regarding device].
The rest of the patches are minor changes/fixes to various flows
in qed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 23 May 2017 06:41:28 +0000 (09:41 +0300)]
qed: Replace set_id() api with set_name()
Current API between qed and protocol modules allows passing an
additional private string - but it doesn't get utilized by qed
anywhere.
Clarify the API by removing it and renaming it 'set_name'.
CC: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 23 May 2017 06:41:27 +0000 (09:41 +0300)]
qede: Log probe of PCI device
Replace meaningless logged print ('Ending successfully qede probe')
with a single-liner containing interesting information about probed
device.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Tue, 23 May 2017 06:41:26 +0000 (09:41 +0300)]
qed: Provide MBI information in dev_info
Pass additional information about package installed on persistent memory
so that protocol drivers would be able to log it.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Tue, 23 May 2017 06:41:25 +0000 (09:41 +0300)]
qed: Enable RoCE parser searching on fp init
Since we're closing the parser searching for RDMA when stoping the
fastpath, we need to re-enable it when starting the fastpath once again.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Tue, 23 May 2017 06:41:24 +0000 (09:41 +0300)]
qed: Flush slowpath tasklet on stop
Today, driver has a synchronization point while closing
the device which synchronizes its slowpath interrupt line.
However, that's insufficient as that ISR would schedule the
slowpath-tasklet - so even after ISR is over it's possible the
handling of the interrupt has not completed.
By doing a disable/enable on the taskelt we guarantee that all
HW events that should no longer be genereated from that point
onward in the flow are truly behind us.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 23 May 2017 06:41:23 +0000 (09:41 +0300)]
qed: Remove BB_A0 references
A0 never went public, so no need to protect against it.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Tue, 23 May 2017 06:41:22 +0000 (09:41 +0300)]
qed: Drop the 's' from num_ports_in_engines
The parameter reflects the number of physical ports connected to a single
engine, not all.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Tue, 23 May 2017 06:41:21 +0000 (09:41 +0300)]
qed: Log incorrectly installed board
In case nvram layout of board is incorrect, board may exhibit peculiar
oddities. Log such a rare event.
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Tue, 23 May 2017 06:41:20 +0000 (09:41 +0300)]
qed: !main_ptt for tunnel configuration
Flows configuring tunnel ports in HW use the main_ptt which should
be reserved for core-functionality.
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 23 May 2017 06:41:19 +0000 (09:41 +0300)]
qed: Align DP_ERR style with other DP macros
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Tue, 23 May 2017 06:41:18 +0000 (09:41 +0300)]
qede: Fix sparse warnings
Solves the following warning in qede -
- Several cases of missing cpu_to_le16() conversions
- Adds 'static' to one function declaration
- Removes dcbnl operation that's currently getting populated twice
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Tue, 23 May 2017 18:11:47 +0000 (13:11 -0500)]
net: ieee802154: fix potential null pointer dereference
Null check at line 918: if (!spi) {, implies spi might be NULL.
Function spi_get_drvdata() dereference pointer spi.
Move pointer priv assignment after the null check.
Addresses-Coverity-ID:
1408888
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Lin Zhang [Tue, 23 May 2017 05:29:39 +0000 (13:29 +0800)]
net: ieee802154: fix net_device reference release too early
This patch fixes the kernel oops when release net_device reference in
advance. In function raw_sendmsg(i think the dgram_sendmsg has the same
problem), there is a race condition between dev_put and dev_queue_xmit
when the device is gong that maybe lead to dev_queue_ximt to see
an illegal net_device pointer.
My test kernel is 3.13.0-32 and because i am not have a real 802154
device, so i change lowpan_newlink function to this:
/* find and hold real wpan device */
real_dev = dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK]));
if (!real_dev)
return -ENODEV;
// if (real_dev->type != ARPHRD_IEEE802154) {
// dev_put(real_dev);
// return -EINVAL;
// }
lowpan_dev_info(dev)->real_dev = real_dev;
lowpan_dev_info(dev)->fragment_tag = 0;
mutex_init(&lowpan_dev_info(dev)->dev_list_mtx);
Also, in order to simulate preempt, i change the raw_sendmsg function
to this:
skb->dev = dev;
skb->sk = sk;
skb->protocol = htons(ETH_P_IEEE802154);
dev_put(dev);
//simulate preempt
schedule_timeout_uninterruptible(30 * HZ);
err = dev_queue_xmit(skb);
if (err > 0)
err = net_xmit_errno(err);
and this is my userspace test code named test_send_data:
int main(int argc, char **argv)
{
char buf[127];
int sockfd;
sockfd = socket(AF_IEEE802154, SOCK_RAW, 0);
if (sockfd < 0) {
printf("create sockfd error: %s\n", strerror(errno));
return -1;
}
send(sockfd, buf, sizeof(buf), 0);
return 0;
}
This is my test case:
root@zhanglin-x-computer:~/develop/802154# uname -a
Linux zhanglin-x-computer 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15
03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
root@zhanglin-x-computer:~/develop/802154# ip link add link eth0 name
lowpan0 type lowpan
root@zhanglin-x-computer:~/develop/802154#
//keep the lowpan0 device down
root@zhanglin-x-computer:~/develop/802154# ./test_send_data &
//wait a while
root@zhanglin-x-computer:~/develop/802154# ip link del link dev lowpan0
//the device is gone
//oops
[381.303307] general protection fault: 0000 [#1]SMP
[381.303407] Modules linked in: af_802154 6lowpan bnep rfcomm
bluetooth nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek
rts5139(C) snd_hda_intel
snd_had_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi
snd_seq_midi_event snd_rawmidi snd_req intel_rapl snd_seq_device
coretemp i915 kvm_intel
kvm snd_timer snd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel
cypted drm_kms_helper drm i2c_algo_bit soundcore video mac_hid
parport_pc ppdev ip parport hid_generic
usbhid hid ahci r8169 mii libahdi
[381.304286] CPU:1 PID: 2524 Commm: 1 Tainted: G C 0 3.13.0-32-generic
[381.304409] Hardware name: Haier Haier DT Computer/Haier DT Codputer,
BIOS FIBT19H02_X64 06/09/2014
[381.304546] tasks:
ffff000096965fc0 ti:
ffffB0013779c000 task.ti:
ffffB8013779c000
[381.304659] RIP: 0010:[<
ffffffff01621fe1>] [<
ffffffff81621fe1>]
__dev_queue_ximt+0x61/0x500
[381.304798] RSP: 0018:
ffffB8013779dca0 EFLAGS:
00010202
[381.304880] RAX:
272b031d57565351 RBX:
0000000000000000 RCX:
ffff8800968f1a00
[381.304987] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff8800968f1a00
[381.305095] RBP:
ffff8e013773dce0 R08:
0000000000000266 R09:
0000000000000004
[381.305202] R10:
0000000000000004 R11:
0000000000000005 R12:
ffff88013902e000
[381.305310] R13:
000000000000007f R14:
000000000000007f R15:
ffff8800968f1a00
[381.305418] FS:
00007fc57f50f740(0000) GS:
ffff88013fc80000(0000)
knlGS:
0000000000000000
[381.305540] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[381.305627] CR2:
00007fad0841c000 CR3:
00000001368dd000 CR4:
00000000001007e0
[361.905734] Stack:
[381.305768]
00000000002052d0 000000003facb30a ffff88013779dcc0
ffff880137764000
[381.305898]
ffff88013779de70 000000000000007f 000000000000007f
ffff88013902e000
[381.306026]
ffff88013779dcf0 ffffffff81622490 ffff88013779dd39
ffffffffa03af9f1
[381.306155] Call Trace:
[381.306202] [<
ffffffff81622490>] dev_queue_xmit+0x10/0x20
[381.306294] [<
ffffffffa03af9f1>] raw_sendmsg+0x1b1/0x270 [af_802154]
[381.306396] [<
ffffffffa03af054>] ieee802154_sock_sendmsg+0x14/0x20 [af_802154]
[381.306512] [<
ffffffff816079eb>] sock_sendmsg+0x8b/0xc0
[381.306600] [<
ffffffff811d52a5>] ? __d_alloc+0x25/0x180
[381.306687] [<
ffffffff811a1f56>] ? kmem_cache_alloc_trace+0x1c6/0x1f0
[381.306791] [<
ffffffff81607b91>] SYSC_sendto+0x121/0x1c0
[381.306878] [<
ffffffff8109ddf4>] ? vtime_account_user+x54/0x60
[381.306975] [<
ffffffff81020d45>] ? syscall_trace_enter+0x145/0x250
[381.307073] [<
ffffffff816086ae>] SyS_sendto+0xe/0x10
[381.307156] [<
ffffffff8172c87f>] tracesys+0xe1/0xe6
[381.307233] Code: c6 a1 a4 ff 41 8b 57 78 49 8b 47 20 85 d2 48 8b 80
78 07 00 00 75 21 49 8b 57 18 48 85 d2 74 18 48 85 c0 74 13 8b 92 ac
01 00 00 <3b> 50 10 73 08 8b 44 90 14 41 89 47 78 41 f6 84 24 d5 00 00
00
[381.307801] RIP [<
ffffffff81621fe1>] _dev_queue_xmit+0x61/0x500
[381.307901] RSP <
ffff88013779dca0>
[381.347512] Kernel panic - not syncing: Fatal exception in interrupt
[381.347747] drm_kms_helper: panic occurred, switching back to text console
In my opinion, there is always exist a chance that the device is gong
before call dev_queue_xmit.
I think the latest kernel is have the same problem and that
dev_put should be behind of the dev_queue_xmit.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Lin Zhang [Tue, 23 May 2017 05:21:05 +0000 (13:21 +0800)]
net: ieee802154: remove explicit set skb->sk
Explicit set skb->sk is needless, sock_alloc_send_skb is already set it.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Jürg Billeter [Tue, 23 May 2017 16:46:25 +0000 (18:46 +0200)]
Bluetooth: btintel: Add MODULE_FIRMWARE entries for iBT 3.5 controllers
The iBT 3.5 controllers (Intel 8265, Windstorm Peak) need
intel/ibt-12-16.sfi and intel/ibt-12-16.ddc firmware files from
linux-firmware repository.
Signed-off-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexey Dobriyan [Mon, 22 May 2017 21:21:39 +0000 (00:21 +0300)]
net: make struct request_sock_ops::obj_size unsigned
This field is sizeof of corresponding kmem_cache so it can't be negative.
Space will be saved after 32-bit kmem_cache_create() patch.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Mon, 22 May 2017 21:20:26 +0000 (00:20 +0300)]
net: make struct inet_frags::qsize unsigned
This field is sizeof of corresponding kmem_cache so it can't be negative.
Prepare for 32-bit kmem_cache_create().
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Govindarajulu Varadarajan [Mon, 22 May 2017 19:19:48 +0000 (12:19 -0700)]
enic: unmask intr only when napi is complete
In case of busy poll, napi_complete_done returns false and does not
dequeue napi. In this case do not unmask the intr. We are guaranteed
napi is called again. This reduces unnecessary iowrites.
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 20 May 2017 13:01:32 +0000 (15:01 +0200)]
net/sched: fix filter flushing
When user instructs to remove all filters from chain, we cannot destroy
the chain as other actions may hold a reference. Also the put in errout
would try to destroy it again. So instead, just walk the chain and remove
all existing filters.
Fixes:
5bc1701881e3 ("net: sched: introduce multichain support for filters")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 20 May 2017 13:01:31 +0000 (15:01 +0200)]
net/sched: properly assign RCU pointer in tcf_chain_tp_insert/remove
*p_filter_chain is rcu-dereferenced on reader path. So here in writer,
property assign the pointer.
Fixes:
2190d1d0944f ("net: sched: introduce helpers to work with filter chains")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Loic Poulain [Tue, 23 May 2017 09:51:00 +0000 (11:51 +0200)]
Bluetooth: btwilink: Fix unexpected skb free
The caller (hci_core) still owns the skb in case of error, releasing
it inside the send function can lead to use-after-free errors.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Guodong Xu [Mon, 22 May 2017 13:50:42 +0000 (21:50 +0800)]
Bluetooth: hci_ll: Fix download_firmware() return when __hci_cmd_sync fails
When __hci_cmd_sync() fails, download_firmware() should also fail, and
the same error value should be returned as PTR_ERR(skb).
Without this fix, download_firmware() will return a success when it actually
failed in __hci_cmd_sync().
Fixes:
371805522f87 ("bluetooth: hci_uart: add LL protocol serdev driver support")
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
David S. Miller [Tue, 23 May 2017 03:32:48 +0000 (23:32 -0400)]
Merge git://git./linux/kernel/git/davem/net
Linus Torvalds [Tue, 23 May 2017 02:31:07 +0000 (19:31 -0700)]
Merge tag 'pstore-v4.12-rc3' of git://git./linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"Marta noticed another misbehavior in EFI pstore, which this fixes.
Hopefully this is the last of the v4.12 fixes for pstore!"
* tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
efi-pstore: Fix write/erase id tracking
Linus Torvalds [Tue, 23 May 2017 02:26:33 +0000 (19:26 -0700)]
Merge tag 'acpi-4.12-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert a 4.11 change that turned out to be problematic and add a
.gitignore file.
Specifics:
- Revert a 4.11 commit related to the ACPI-based handling of laptop
lids that made changes incompatible with existing user space stacks
and broke things there (Lv Zheng).
- Add .gitignore to the ACPI tools directory (Prarit Bhargava)"
* tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / button: Remove lid_init_state=method mode"
tools/power/acpi: Add .gitignore file
Linus Torvalds [Tue, 23 May 2017 02:24:32 +0000 (19:24 -0700)]
Merge tag 'pm-4.12-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix RTC wakeup from suspend-to-idle broken recently, fix CPU
idleness detection condition in the schedutil cpufreq governor, fix a
cpufreq driver build failure, fix an error code path in the power
capping framework, clean up the hibernate core and update the
intel_pstate documentation.
Specifics:
- Fix RTC wakeup from suspend-to-idle broken by the recent rework of
ACPI wakeup handling (Rafael Wysocki).
- Update intel_pstate driver documentation to reflect the current
code and explain how it works in more detail (Rafael Wysocki).
- Fix an issue related to CPU idleness detection on systems with
shared cpufreq policies in the schedutil governor (Juri Lelli).
- Fix a possible build issue in the dbx500 cpufreq driver (Arnd
Bergmann).
- Fix a function in the power capping framework core to return an
error code instead of 0 when there's an error (Dan Carpenter).
- Clean up variable definition in the hibernation core (Pushkar
Jambhlekar)"
* tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: dbx500: add a Kconfig symbol
PM / hibernate: Declare variables as static
PowerCap: Fix an error code in powercap_register_zone()
RTC: rtc-cmos: Fix wakeup from suspend-to-idle
PM / wakeup: Fix up wakeup_source_report_event()
cpufreq: intel_pstate: Document the current behavior and user interface
cpufreq: schedutil: use now as reference when aggregating shared policy requests
Jan Kiszka [Mon, 22 May 2017 05:46:55 +0000 (07:46 +0200)]
i2c: designware: Fix bogus sda_hold_time due to uninitialized vars
We need to initializes those variables to 0 for platforms that do not
provide ACPI parameters. Otherwise, we set sda_hold_time to random
values, breaking e.g. Galileo and IOT2000 boards.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Fixes:
9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Thu, 18 May 2017 20:07:49 +0000 (13:07 -0700)]
efi-pstore: Fix write/erase id tracking
Prior to the pstore interface refactoring, the "id" generated during
a backend pstore_write() was only retained by the internal pstore
inode tracking list. Additionally the "part" was ignored, so EFI
would encode this in the id. This corrects the misunderstandings
and correctly sets "id" during pstore_write(), and uses "part"
directly during pstore_erase().
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Fixes:
76cc9580e3fb ("pstore: Replace arguments for write() API")
Fixes:
a61072aae693 ("pstore: Replace arguments for erase() API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
David S. Miller [Mon, 22 May 2017 23:37:40 +0000 (19:37 -0400)]
Merge branch 'dsa-distribute-switch-events'
Vivien Didelot says:
====================
net: dsa: distribute switch events
DSA is by nature the support for a switch fabric, which can be composed
of a single, or multiple interconnected Ethernet switch chips.
The current DSA core behavior is to identify the slave port targeted by
a request (e.g. adding a VLAN entry), and program the switch chip to
which it belongs accordingly.
This is problematic in a multi-chip environment, since all chips of a
fabric must be aware of most configuration changes. Here are some
concrete examples in a 3-chip environment:
[CPU].................... (mdio)
(eth0) | : : :
_|_____ _______ _______
[__sw0__]--[__sw1__]--[__sw2__]
| | | | | | | | |
v v v v v v v v v
p1 p2 p3 p4 p5 p6 p7 p8 p9
If you add a VLAN entry on p7, sw2 gets programmed, but frames won't
reach the CPU interface in a VLAN filtered setup. sw0 and sw1 also need
to be programmed. The same problem comes with MAC addresses (FDB, MDB),
or ageing time changes for instance.
This patch series uses the notification chain introduced for bridging,
to notify not only bridge, but switchdev attributes and objects events
to all switch chips of the fabric.
An ugly debug message printing the ignored event and switch info in the
code handling the switch VLAN events would give us:
# bridge vlan add dev p7 vid 42
sw0: ignoring DSA_NOTIFIER_VLAN_ADD for sw2 (prepare phase)
sw1: ignoring DSA_NOTIFIER_VLAN_ADD for sw2 (prepare phase)
sw0: ignoring DSA_NOTIFIER_VLAN_ADD for sw2 (commit phase)
sw1: ignoring DSA_NOTIFIER_VLAN_ADD for sw2 (commit phase)
To achieve that, patches 1-8 change the scope of the bridge and
switchdev callbacks from the DSA slave device to the generic DSA port,
so that the port-wide API can be used later for switch ports not exposed
to userspace, such as CPU and DSA links.
Patches 9-15 move the DSA port specific functions in a new port.c file.
Patches 16-20 introduce new events to notify the fabric about switchdev
attributes and objects manipulation.
This patch series only adds the plumbing to support a distributed
configuration, but for the moment, each switch chip ignores events from
other chips of the fabric, to keep the current behavior.
The next patch series will add support for cross-chip configuration of
bridge ageing time, VLAN and MAC address databases operations, etc.
====================
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:55 +0000 (17:00 -0400)]
net: dsa: add VLAN notifier
Add two new DSA_NOTIFIER_VLAN_ADD and DSA_NOTIFIER_VLAN_DEL events to
notify not only a single switch, but all switches of a the fabric when
an VLAN entry is added or removed.
For the moment, keep the current behavior and ignore other switches.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:54 +0000 (17:00 -0400)]
net: dsa: add MDB notifier
Add two new DSA_NOTIFIER_MDB_ADD and DSA_NOTIFIER_MDB_DEL events to
notify not only a single switch, but all switches of a the fabric when
an MDB entry is added or removed.
For the moment, keep the current behavior and ignore other switches.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:53 +0000 (17:00 -0400)]
net: dsa: add FDB notifier
Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to
notify not only a single switch, but all switches of a the fabric when
an FDB entry is added or removed.
For the moment, keep the current behavior and ignore other switches.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:52 +0000 (17:00 -0400)]
net: dsa: add notifier for ageing time
This patch keeps the port-wide ageing time handling code in
dsa_port_ageing_time, pushes the requested ageing time value in a new
switch fabric notification, and moves the switch-wide ageing time
handling code in dsa_switch_ageing_time.
This has the effect that now not only the switch that the target port
belongs to can be programmed, but all switches composing the switch
fabric. For the moment, keep the current behavior and ignore other
switches.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:51 +0000 (17:00 -0400)]
net: dsa: move notifier info to private header
The DSA notifier events and info structure definitions are not meant for
DSA drivers and users, but only used internally by the DSA core files.
Move them from the public net/dsa.h file to the private dsa_priv.h file.
Also use this opportunity to turn the events into an anonymous enum,
because we don't care about the values, and this will prevent future
conflicts when adding (and sorting) new events.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:50 +0000 (17:00 -0400)]
net: dsa: move VLAN handlers
Move the DSA port code which handles VLAN objects in port.c, where it
belongs.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:49 +0000 (17:00 -0400)]
net: dsa: move MDB handlers
Move the DSA port code which handles MDB objects in port.c, where it
belongs.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:48 +0000 (17:00 -0400)]
net: dsa: move FDB handlers
Move the DSA port code which handles FDB objects in port.c, where it
belongs.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 19 May 2017 21:00:47 +0000 (17:00 -0400)]
net: dsa: move ageing time setter
Move the DSA port code which sets a port ageing time in port.c, where it
belongs.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>