Merge tag 'qcom-drivers-for-6.3-3' of https://git./linux/kernel/git/qcom/linux into soc/drivers

One more Qualcomm driver update for 6.3

This introduces the power-supply driver providing battery and power
supply status on many recent Qualcomm platforms, including the Qualcomm
SC8180X and SC8280XP laptop platforms and the SM8350 mobile platform.

It's introduced through the Qualcomm tree due to its dependencies on the
pmic_glink driver, which was merged already for v6.3.

* tag 'qcom-drivers-for-6.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  power: supply: Introduce Qualcomm PMIC GLINK power supply

Link: https://lore.kernel.org/r/20230215043658.1156472-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

power: supply: Introduce Qualcomm PMIC GLINK power supply

The PMIC GLINK service, running on a coprocessor of modern Qualcomm
platforms, deals with battery charging and fuel gauging, as well as
reporting status of AC and wireless power supplies.

As this is just one of the functionalities provided by the PMIC GLINK
service, this power supply driver is implemented as an auxilirary bus
driver, spawned by the main "pmic glink" driver when the PMIC GLINK
service is detected.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP & SM8450-HDK
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230207144241.1767973-1-quic_bjorande@quicinc.com

soc: apple: rtkit: Do not copy the reg state structure to the stack

The register state struct is 848 bytes, which ends up bloating the
apple_rtkit_crashlog_dump_regs stack frame beyond 1024 on some
32-bit platforms, triggering compile warnings.

This doesn't matter for 64BIT/ARM64, but there's also no good reason to
copy the structure to the stack in this case. We can use __packed to
avoid alignment issues, there are no double-read hazards, and this is a
fatal error path so performance does not matter.

Fixes: 22991d8d5725 ("soc: apple: rtkit: Add register dump decoding to crashlog")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-drivers-for-6.3-2' of https://git./linux/kernel/git/qcom/linux into soc/drivers

More Qualcomm driver updates for 6.3

The qcom_scm.h file is moved into firmware/qcom, to avoid having any
Qualcomm-specific files directly in include/linux.

Support for PMIC GLINK is introduced, which on newer Qualcomm platforms
provides an interface to the firmware implementing battery management
and USB Type-C handling. Together with the base driver comes the custom
altmode support driver.

SMD RPM gains support for IPQ9574, and socinfo is extended with support
for revision 17 of the information format and soc_id for IPQ5332 and
IPQ8064 are added.

The qcom_stats  is changes not to fail when not all parts are
initialized.

* tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
  dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
  dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
  firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
  MAINTAINERS: Update qcom CPR maintainer entry
  dt-bindings: firmware: document Qualcomm SM8550 SCM
  dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
  soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
  dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
  soc: qcom: socinfo: Add support for new field in revision 17
  soc: qcom: smd-rpm: Add IPQ9574 compatible
  soc: qcom: pmic_glink: remove redundant calculation of svid
  soc: qcom: stats: Populate all subsystem debugfs files
  dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
  soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
  soc: qcom: pmic_glink: Introduce altmode support
  soc: qcom: pmic_glink: Introduce base PMIC GLINK driver
  dt-bindings: soc: qcom: Introduce PMIC GLINK binding
  soc: qcom: dcc: Drop driver for now

Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-drivers-for-6.3' of https://git./linux/kernel/git/qcom/linux into soc/drivers

Qualcomm driver updates for v6.3

This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.

The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.

The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.

Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.

Lastly a driver to program the ramp controller in MSM8976 is introduced.

* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
  firmware: qcom: scm: Add wait-queue handling logic
  dt-bindings: firmware: qcom,scm: Add optional interrupt
  Revert "dt-bindings: power: rpmpd: Add SM4250 support"
  Revert "soc: qcom: rpmpd: Add SM4250 support"
  soc: qcom: socinfo: Add a bunch of older SoCs
  dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
  dt-bindings: arm: qcom,ids: Add QRD board ID
  soc: qcom: socinfo: Fix soc_id order
  dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
  dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
  soc: qcom: rmtfs: Optionally map RMTFS to more VMs
  dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
  dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
  dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
  dt-bindings: firmware: qcom,scm: document MSM8226 clocks
  soc: qcom: ramp_controller: Make things static
  soc: qcom: rmphpd: add power domains for sa8775p
  dt-bindings: power: qcom,rpmpd: document sa8775p
  PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
  soc: qcom: dcc: rewrite description of dcc sysfs files
  ...

Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc: sunxi: SUN20I_PPU should depend on PM

An $ARCH or a platform should select PM. Single device drivers
should only depend on PM, not select it.

Having SUN20I_PPU depend on PM removes a kconfig warning:

WARNING: unmet direct dependencies detected for PM
  Depends on [n]: !MMU [=y]
  Selected by [y]:
  - SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])

Fixes: 0ad2185dcb5e ("soc: sunxi: select CONFIG_PM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

memory: renesas-rpc-if: Remove redundant division of dummy

The dummy cycles value was wrongly calculated if dummy.buswidth > 1,
which affects QSPI, OSPI, HyperFlash on various SoCs. We're lucky in
Single SPI case since its dummy.buswidth equals to 1, so the result of
the division is unchanged

This issue can be reproduced using something like the following commands
A. QSPI mode: Mount device with jffs2 format
    jffs2: CLEANMARKER node found at 0x00000004, not first node in block (0x00000000)

B. QSPI mode: Write data to mtd10, where mtd10 is a parition on SPI Flash
storage, defined properly in a device tree

[Correct fragment, read from SPI Flash]

  root@v3x:~# echo "hello" > /dev/mtd10
  root@v3x:~# hexdump -C -n100 /dev/mtd10
  00000000  68 65 6c 6c 6f 0a ff ff  ff ff ff ff ff ff ff ff  |hello...........|
  00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|

[Incorrect read of the same fragment: see the difference at offsets 0-3]

  root@v3x:~# echo "hello" > /dev/mtd10
  root@v3x:~# hexdump -C -n100 /dev/mtd10
  00000000  00 00 00 00 68 65 6c 6c  6f 0a ff ff ff ff ff ff  |....hello.......|
  00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|

As seen from the result, 4 NULL bytes were inserted before the test data.
Wrong calculation in rpcif_prepare() led to miss of some dummy cycle. A
division by bus width is redundant because it had been performed already
in spi-rpc-if.c::rpcif_spi_mem_prepare()

Fix this by removing the redundant division.

Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230112090655.43367-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230207173051.449151-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc: qcom: socinfo: Add IDs for IPQ5332 and its variant

Add SOC ID for Qualcomm IPQ5332 and IPQ5322 variants.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208055709.13162-3-quic_kathirav@quicinc.com

dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant

Add SOC ID for Qualcomm IPQ5332 and IPQ5322 variants.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208055709.13162-2-quic_kathirav@quicinc.com

dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1

Add define for another power saving state used on SM8350 for the GPU.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206145707.122937-3-dmitry.baryshkov@linaro.org

firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/

Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.

Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com

MAINTAINERS: Update qcom CPR maintainer entry

I do no longer have access to qcom CPR hardware, nor the documentation for
said hardware.

Based on past and recent activity, I propose Bjorn and Konrad as the new
qcom CPR maintainers.

Signed-off-by: Niklas Cassel <nks@flawful.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123104305.44641-1-niklas.cassel@wdc.com

dt-bindings: firmware: document Qualcomm SM8550 SCM

Document the compatible for Qualcomm SM8550 SCM.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230207-topic-sm8550-upstream-scm-bindings-v2-1-ca12bd33fa1c@linaro.org

dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible

Add a compatible for the sa8775p platform's Secure Channel Manager
firmware interface.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127192139.299228-1-brgl@bgdev.pl

soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants

Add Soc IDs table entries for Qualcomm IPQ8064 and variants.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124143236.1038-2-ansuelsmth@gmail.com

dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants

Add Soc IDs for Qualcomm IPQ8064 and variants.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124143236.1038-1-ansuelsmth@gmail.com

soc: qcom: socinfo: Add support for new field in revision 17

Add support for new field coming with socinfo structure under v17 to get
hardware platform's oem variant id. This is to enable OEMs to have minor
changes in the board, but to use the same platform subtype as the one
supported by Qualcomm. The new field is to be used in platform overlay
file. Default value is 0, reserved for Qualcomm platforms. Also, add
debugfs support to read this field for a device.

Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127041200.29094-1-quic_namajain@quicinc.com

soc: qcom: smd-rpm: Add IPQ9574 compatible

Adding compatible string to support RPM communication over SMD for
IPQ9574 SoC

Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113150310.29709-2-quic_devipriy@quicinc.com

soc: qcom: pmic_glink: remove redundant calculation of svid

gcc with W=1 reports
drivers/soc/qcom/pmic_glink_altmode.c:223:13: error: variable ‘svid’ set but not used [-Werror=unused-but-set-variable]
  223 |         u16 svid;

From reviewing the code, the setting of alt_port->svid does the same calculation.
Both are not needed.  For debuggablity, keep the setting of local svid.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206135831.1794583-1-trix@redhat.com

soc: qcom: stats: Populate all subsystem debugfs files

This driver relies on SMEM to populate items for each subsystem before
the device probes. The items in SMEM that are being looked for are
populated by the subsystems lazily, and therefore may not exist until
the device has booted. For example, if I build this driver into the
kernel on Trogdor Lazor and boot up, I don't see a 'modem' debugfs file
populated, because the modem boots and populates the SMEM item after
this driver probes.

Always populate the files for the subsystems if they're in SMEM, and
make the qcom_subsystem_sleep_stats_show() function return 0 if the SMEM
items still isn't there. This way we can run a simple command like

grep ^ /sys/kernel/debug/qcom_stats/*

and collect the subsystem sleep stats without interspersed errors or
missing details entirely because this driver probed first.

Fixes: 1d7724690344 ("soc: qcom: Add Sleep stats driver")
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119032329.2909383-1-swboyd@chromium.org

dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes

Update the bindings to allow for generic regulator nodes instead of
device-specific node names.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112203653.23139-1-quic_molvera@quicinc.com

soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies

QMI is a network protocol, so anything using requires CONFIG_NET
to be enabled as well:

WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS
  Depends on [n]: NET [=n]
  Selected by [m]:
  - QCOM_PDR_HELPERS [=m]
arm-linux-gnueabi-ld: drivers/soc/qcom/qmi_interface.o: in function `qmi_send_new_lookup':
qmi_interface.c:(.text+0xf0): undefined reference to `kernel_sendmsg'

Add the dependency to both QCOM_PDR_HELPERS and QCOM_PMIC_GLINK to make
it clearly what the dependency is when another PDR user is added.

pmic_glink also needs CONFIG_OF:

drivers/soc/qcom/pmic_glink_altmode.c: In function 'pmic_glink_altmode_probe':
drivers/soc/qcom/pmic_glink_altmode.c:418:33: error: 'struct drm_bridge' has no member named 'of_node'

Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206193804.191343-1-arnd@kernel.org

Merge tag 'asahi-soc-rtkit-pmgr-6.3' of https://github.com/AsahiLinux/linux into soc/drivers

Apple SoC RTKit/PMGR updates for 6.3.

This time around we have a PMGR change to allow IRQ-safe usage, RTKit
crash register dump decoding, and a bunch of RTKit API changes used by
upcoming drivers.

* tag 'asahi-soc-rtkit-pmgr-6.3' of https://github.com/AsahiLinux/linux:
  soc: apple: rtkit: Add register dump decoding to crashlog
  soc: apple: rtkit: Export non-devm init/free functions
  soc: apple: rtkit: Add a private pointer to apple_rtkit_shmem
  soc: apple: apple-pmgr-pwrstate: Switch to IRQ-safe mode
  soc: apple: rtkit: Add apple_rtkit_idle() function

Link: https://lore.kernel.org/r/4790bdc4-b6e2-228b-771f-023363f65fb3@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-drivers-6.3-2' of https://git./linux/kernel/git/krzk/linux into soc/drivers

Samsung SoC driver changes for v6.3

Deprecate syscon phandle to the PMU node in MIPI and DP video phy
drivers in favor of putting the device nodes directly under the PMU
nodes.  This better reflects device hierarchy and allows later to solve
dtc W=1 and dtbs_check warnings.

* tag 'samsung-drivers-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  phy: samsung,mipi-video-phy: deprecate syscon phandle
  phy: samsung,dp-video-phy: deprecate syscon phandle
  dt-bindings: phy: samsung,mipi-video-phy: deprecate syscon phandle
  dt-bindings: phy: samsung,dp-video-phy: deprecate syscon phandle
  MAINTAINERS: arm64: tesla: correct pattern for directory
  dt-bindings: soc: samsung: exynos-sysreg: correct indentation for deprecated
  dt-bindings: soc: samsung: exynos-sysreg: add dedicated SYSREG compatibles to Exynosautov9
  dt-bindings: soc: samsung: exynos-sysreg: add dedicated SYSREG compatibles to Exynos850
  dt-bindings: soc: samsung: exynos-sysreg: Add tesla FSD sysreg compatibles
  dt-bindings: soc: samsung: exynos-sysreg: add clocks for Exynos850
  dt-bindings: soc: samsung: exynos-sysreg: add dedicated SYSREG compatibles to Exynos5433
  dt-bindings: soc: samsung: exynos-sysreg: split from syscon

Link: https://lore.kernel.org/r/20230205144657.951749-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge branch '20230201041853.1934355-1-quic_bjorande@quicinc.com' into drivers-for-6.3

soc: qcom: pmic_glink: Introduce altmode support

With the PMIC GLINK service, the host OS subscribes to USB-C altmode
messages, which are sent by the firmware to notify the host OS about
state updates and HPD interrupts.

The pmic_glink_altmode driver registers for these notifications and
propagates the notifications as typec_mux, typec_switch and DRM OOB
notifications as necessary to implement DisplayPort altmode support.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP & SM8450-HDK
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201041853.1934355-4-quic_bjorande@quicinc.com

soc: qcom: pmic_glink: Introduce base PMIC GLINK driver

The PMIC GLINK service runs on one of the co-processors of some modern
Qualcomm platforms and implements USB-C and battery managements. It uses
a message based protocol over GLINK for communication with the OS, hence
the name.

The driver implemented provides the rpmsg device for communication and
uses auxiliary bus to spawn off individual devices in respective
subsystem. The auxiliary devices are spawned off from a
platform_device, so that the drm_bridge is available early, to allow the
DisplayPort driver to probe even before the remoteproc has spun up.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-MTP & SM8450-HDK
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201041853.1934355-3-quic_bjorande@quicinc.com

dt-bindings: soc: qcom: Introduce PMIC GLINK binding

The PMIC GLINK service, running on a coprocessor on some modern Qualcomm
platforms and implement USB Type-C handling and battery management.
This binding describes the component in the OS used to communicate with
the firmware and connect it's resources to those described in the
Devicetree, particularly the USB Type-C controllers relationship with
USB and DisplayPort components.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM8350 PDX215
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201041853.1934355-2-quic_bjorande@quicinc.com

phy: samsung,mipi-video-phy: deprecate syscon phandle

The MIPI phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.

Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

phy: samsung,dp-video-phy: deprecate syscon phandle

The DisplayPort phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.

Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: phy: samsung,mipi-video-phy: deprecate syscon phandle

The MIPI phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: phy: samsung,dp-video-phy: deprecate syscon phandle

The DisplayPort phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.

Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Merge tag 'v6.2-next-soc' of https://git./linux/kernel/git/matthias.bgg/linux into soc/drivers

Introduce MediaTek regulator coupler driver to ensure that the SRAM
voltage in par with the GPU voltage. This allows for a stable use of the
GPU.

mtk-mutex:
- add support for MT8188 vdosys0 path
- allow it to be build as module
- add support for MT8195 vdosys1 path

mmsys:
- add MT8188 vdosys0 path
- allow to be build as a module
- add MT8195 vdosys1 path
- add support for CMDQ
- allow for up to 64 reset bits
- add supprot for the MT8195 vppsys[0,1] pathes

pm-domains:
- keep power for the MT8186 ADSP on by default
- add support for MT8188
- add support for buck isolation needed in specific pm-domains for
  MT8188 and MT8192

mtk-svs:
- enable IRQ later to allow using kexec
- several improvments on the code base
- fix modalias

pmic wrapper:
- convert binding to yaml. As this is thightly coupled to the MT6357
  PMIC, I took patches regarding it as well.

* tag 'v6.2-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (41 commits)
  soc: mediatek: mtk-svs: add missing MODULE_DEVICE_TABLE
  soc: mediatek: mtk-devapc: Switch to devm_clk_get_enabled()
  soc: mtk-svs: mt8183: refactor o_slope calculation
  soc: mediatek: mtk-svs: delete superfluous platform data entries
  soc: mediatek: mtk-svs: move svs_platform_probe into probe
  soc: mediatek: mtk-svs: improve readability of platform_probe
  soc: mediatek: mtk-svs: clean up platform probing
  soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported
  soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01()
  soc: mediatek: mtk-svs: reset svs when svs_resume() fail
  soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail
  soc: mediatek: mmsys: add support for MT8195 VPPSYS
  dt-bindings: arm: mediatek: mmsys: Add support for MT8195 VPPSYS
  soc: mediatek: Introduce mediatek-regulator-coupler driver
  soc: mediatek: mtk-svs: Enable the IRQ later
  soc: mediatek: add mtk-mutex support for mt8195 vdosys1
  soc: mediatek: add mtk-mutex component - dp_intf1
  soc: mediatek: mmsys: add reset control for MT8195 vdosys1
  soc: mediatek: mmsys: add mmsys for support 64 reset bits
  soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
  ...

Link: https://lore.kernel.org/r/396d51fc-81f3-4a2b-d7a7-b966bfe3002a@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'zynqmp-soc-for-v6.3' of https://github.com/Xilinx/linux-xlnx into soc/drivers

arm64: ZynqMP SoC changes for v6.3

Firmware changes
- fix memory leak in error path inside notification code
- trivial comment cleanup
- add workaround for SD tap delay programming with old PMUFW

* tag 'zynqmp-soc-for-v6.3' of https://github.com/Xilinx/linux-xlnx:
  firmware: xilinx: Clear IOCTL_SET_SD_TAPDELAY using PM_MMIO_WRITE
  firmware: xilinx: Remove kernel-doc marking in the code
  driver: soc: xilinx: fix memory leak in xlnx_add_cb_for_notify_event()

Link: https://lore.kernel.org/r/42be5129-3ca2-ddbc-ac3b-6448245b61c2@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc: nuvoton: Add SoC info driver for WPCM450

Add a SoC information driver for Nuvoton WPCM450 SoCs. It provides
information such as the SoC revision.

Usage example:

  # grep . /sys/devices/soc0/*
  /sys/devices/soc0/family:Nuvoton NPCM
  /sys/devices/soc0/revision:A3
  /sys/devices/soc0/soc_id:WPCM450

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20221031223926.241641-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230201051717.1005938-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc: mediatek: mtk-svs: add missing MODULE_DEVICE_TABLE

This patch adds missing MODULE_DEVICE_TABLE definition
which generates correct modalias for automatic loading
of this driver when it is built as an external module.

Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20220928151346.1942977-1-zengheng4@huawei.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-devapc: Switch to devm_clk_get_enabled()

This driver does exactly devm_clk_get() and clk_prepare_enable() right
after, which is exactly what devm_clk_get_enabled() does: clean that
up by switching to the latter.

This commit brings no functional changes.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221006110935.59695-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mtk-svs: mt8183: refactor o_slope calculation

The o_slope value is dependent of the o_slope_sign, refactor code to get
rid of unnecessary if constructs.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230111074528.29354-15-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-svs: delete superfluous platform data entries

The platform name and efuse parsing function pointer are only used while
probing the device. Use them from the svs_platform_data struct instead.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-12-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-svs: move svs_platform_probe into probe

Moving svs_platform_probe into driver probe function will allow us to
reduce svs_platform members. This will be done in a follow-up patch.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-11-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-svs: improve readability of platform_probe

If a compatible misses a match data entry, then something is wrong in
the development phase, we don't need to check for that at runtime.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-10-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-svs: clean up platform probing

We only ever call the SoC specific probe function from
svs_platform_probe. No need to carry that function in a global
datastructure around.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-9-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported

Some projects might not support CONFIG_DEBUG_FS but still needs svs to be
alive. Therefore, enclose debug cmd codes with CONFIG_DEBUG_FS to make sure
svs can be alive when CONFIG_DEBUG_FS not supported.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-8-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01()

svs_init01() calls pm_runtime_get_sync() and added fail path as
svs_init01_finish to put usage_counter. However, pm_runtime_get_sync()
will increment usage_counter even it failed. Fix it by replacing it with
pm_runtime_resume_and_get() to keep usage counter balanced.

Fixes: 681a02e95000 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230111074528.29354-5-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-svs: reset svs when svs_resume() fail

Add svs reset when svs_resume() fail.

Fixes: a825d72f74a3 ("soc: mediatek: fix missing clk_disable_unprepare() on err in svs_resume()")
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-3-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail

If svs init02 fail, it means we cannot rely on svs bank voltages anymore.
We need to disable svs function and restore DVFS opp voltages back to the
default voltages for making sure we have enough DVFS voltages.

Fixes: 681a02e95000 ("soc: mediatek: SVS: introduce MTK SVS engine")
Fixes: 0bbb09b2af9d ("soc: mediatek: SVS: add mt8192 SVS GPU driver")
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-2-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: apple: rtkit: Add register dump decoding to crashlog

When the coprocessor crashes, it's useful to get a proper register dump
so we can find out what the firmware was doing. Add a decoder for this.

Originally this had ESR decoding by reusing the ARM64 arch header for
this, but that introduces some module linking and cross-arch compilation
issues, so let's leave that out for now.

Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Hector Martin <marcan@marcan.st>

soc: apple: rtkit: Export non-devm init/free functions

While we normally encourage devm usage by drivers, some consumers (and
in particular the upcoming Rust abstractions) might want to manually
manage memory. Export the raw functions to make this possible.

Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Hector Martin <marcan@marcan.st>

soc: apple: rtkit: Add a private pointer to apple_rtkit_shmem

This allows downstream consumers to keep track of private data for shmem
mappings. In particular, the Rust abstraction will use this to safely
drop data associated with a mapping when it is unmapped.

Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Hector Martin <marcan@marcan.st>

soc: apple: apple-pmgr-pwrstate: Switch to IRQ-safe mode

This requires changing the reset path locking primitives to the spinlock
path in genpd, instead of the mutex path.

Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>

soc: apple: rtkit: Add apple_rtkit_idle() function

This is yet another low power mode, used by DCP.

Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>

soc: qcom: dcc: Drop driver for now

Arnd asks for the DCC driver to be dropped for now, in order to allow
for more thorough review, by a wider audience, of the ABI introduced.

The Devicetree binding is adequately describing the hardware block, so
this is kept.

Requested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

soc: sunxi: select CONFIG_PM

Selecting CONFIG_PM_GENERIC_DOMAINS without CONFIG_PM leads to a
build failure:

WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS
  Depends on [n]: PM [=n]
  Selected by [y]:
  - SUN20I_PPU [=y] && (ARCH_SUNXI [=n] || COMPILE_TEST [=y])

drivers/base/power/domain_governor.c: In function 'default_suspend_ok':
drivers/base/power/domain_governor.c:85:24: error: 'struct dev_pm_info' has no member named 'ignore_children'
   85 |         if (!dev->power.ignore_children)
      |                        ^
drivers/base/power/domain.c: In function 'genpd_queue_power_off_work':
drivers/base/power/domain.c:657:20: error: 'pm_wq' undeclared (first use in this function)
  657 |         queue_work(pm_wq, &genpd->power_off_work);
      |                    ^~~~~

Unfortunately platforms are inconsistent between using 'select PM'
and 'depends on PM' here. CONFIG_PM is a user-visible symbol, so
in principle we should be using 'depends on', but on the other hand
using 'select' here is more common among drivers/soc. Go with the
majority for now, as this has a smaller risk of introducing circular
dependencies. We may need to clean this up for consistency later.

Fixes: 0e30ca5ab0a8 ("soc: sunxi: Add Allwinner D1 PPU driver")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-drivers-for-v6.3' of https://git./linux/kernel/git/amlogic/linux into soc/drivers

Amlogic Drivers changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- Addition of NNA power domain for A311D SoC
- meson_sm.txt  conversionto dt-schema
- mark amlogic,meson-gx-pwrc bindings as deprecated
- fix of meson_sm driver by using NULL instead of 0

* tag 'amlogic-drivers-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  firmware: meson_sm: stop using 0 as NULL pointer
  dt-bindings: power: amlogic,meson-gx-pwrc: mark bindings as deprecated
  dt-bindings: firmware: convert meson_sm.txt to dt-schema
  soc: amlogic: meson-pwrc: Add NNA power domain for A311D
  dt-bindings: power: Add G12A NNA power domain
  dt-bindings: reset: meson-g12a: Add missing NNA reset

Link: https://lore.kernel.org/r/ec9552d8-96df-a677-ab94-9723f5c30f1c@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-drivers-6.3' of git://git./linux/kernel/git/shawnguo/linux into soc/drivers

i.MX drivers change for 6.3:

- A couple of cleanups to drop device_driver owner setting from i.MX93
  PD and SRC driver.
- A series from Lucas Stach to add high performance PLL clock support
  for imx8mp-blk-ctrl driver.
- A couple of changes to set LCDIF panic read hurry level for i.MX8M
  blk-ctrl drivers.
- Use devm_platform_get_and_ioremap_resource() for imx-weim bus driver.

* tag 'imx-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: imx8mp-blk-ctrl: set HDMI LCDIF panic read hurry level
  soc: imx: imx93-src: No need to set device_driver owner
  soc: imx: imx93-pd: No need to set device_driver owner
  soc: imx: imx8m-blk-ctrl: set LCDIF panic read hurry level
  soc: imx: imx8mp-blk-ctrl: expose high performance PLL clock
  soc: imx: imx8mp-blk-ctrl: add instance specific probe function
  soc: imx: add Kconfig symbols for blk-ctrl drivers
  bus: imx-weim: use devm_platform_get_and_ioremap_resource()

Link: https://lore.kernel.org/r/20230130023947.11780-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-6.3/drivers' of https://github.com/Broadcom/stblinux into soc/drivers

This pull request contains Broadcom ARM/ARM64 SoCs drivers updates for
6.3, please pull the following:

- Uwe removes an empty platform driver remove function in the
  bcm2835-power driver

* tag 'arm-soc/for-6.3/drivers' of https://github.com/Broadcom/stblinux:
  soc: bcm: bcm2835-power: Drop empty platform remove function

Link: https://lore.kernel.org/r/20230128193844.1628888-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-drivers-for-6.3-1' of https://git./linux/kernel/git/sunxi/linux into soc/drivers

- introduce Allwinner PPU driver
- limit iteration in sram debugfs

* tag 'sunxi-drivers-for-6.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  soc: sunxi: Add Allwinner D1 PPU driver
  dt-bindings: power: Add Allwinner D1 PPU
  soc: sunxi: sram: Only iterate over SRAM children

Link: https://lore.kernel.org/r/Y9RXXATRNqEv0GJT@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-drivers-for-v6.3-tag2' of git://git./linux/kernel/git/geert/renesas-devel into soc/drivers

Renesas driver updates for v6.3 (take two)

  - Add support for the Renesas RZ/V2M External Power Sequence
    Controller (PWC).

* tag 'renesas-drivers-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: Add PWC support for RZ/V2M

Link: https://lore.kernel.org/r/cover.1674815095.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'riscv-soc-for-v6.3-mw0' of https://git./linux/kernel/git/conor/linux into soc/drivers

RISC-V SoC drivers for v6.3-mw0

It's all StarFive stuff this time:
Their new JH7110 SoC uses a SiFive core complex, and therefore a
SiFive cache controller too. That needed a compatible added to both the
binding and driver.
The JH7110 also has power domains, which are supported by a new driver
and a corresponding dt-binding.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-for-v6.3-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  soc: starfive: Add StarFive JH71XX pmu driver
  dt-bindings: power: Add starfive,jh7110-pmu
  soc: sifive: ccache: Add StarFive JH7110 support
  dt-bindings: sifive,ccache0: Support StarFive JH7110 SoC

Link: https://lore.kernel.org/r/Y9LNIm9pkr+Owv/e@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

soc: mediatek: mmsys: add support for MT8195 VPPSYS

Add MT8195 VPPSYS0 and VPPSYS1 driver data.

Signed-off-by: Roy-CW.Yeh <roy-cw.yeh@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118031509.29834-5-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

dt-bindings: arm: mediatek: mmsys: Add support for MT8195 VPPSYS

For MT8195, VPPSYS0 and VPPSYS1 are 2 display pipes with
hardware differences in power domains, clocks and subsystem counts,
which should be determined by compatible names.

Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230118031509.29834-3-moudy.ho@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: Introduce mediatek-regulator-coupler driver

This driver currently deals with GPU-SRAM regulator coupling, ensuring
that the SRAM voltage is always between a specific range of distance to
the GPU voltage, depending on the SoC, necessary in order to achieve
system stability across the full range of supported GPU frequencies.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Link: https://lore.kernel.org/r/20221006115816.66853-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: imx: imx8mp-blk-ctrl: set HDMI LCDIF panic read hurry level

Same as done for both LCDIF interfaces in the MEDIA domain, set
the panic priority of the LCDIF instance in the HDMI domain to
the maximium NoC priority of 7 to minimize chances of display
underflows.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

soc: sunxi: Add Allwinner D1 PPU driver

The PPU contains a series of identical MMIO register ranges, one for
each power domain. Each range contains control/status bits for a clock
gate, reset line, output gates, and a power switch. (The clock and reset
are separate from, and in addition to, the bits in the CCU.) It also
contains a hardware power sequence engine to control the other bits.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230126063419.15971-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

dt-bindings: power: Add Allwinner D1 PPU

The Allwinner D1 family of SoCs contain a PPU power domain controller
separate from the PRCM. It can power down the video engine and DSP, and
it contains special logic for hardware-assisted CPU idle. Other recent
Allwinner SoCs (e.g. TV303) have a PPU with a different set of domains.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230126063419.15971-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

soc: mediatek: mtk-svs: Enable the IRQ later

If the system does not come from reset (like when is booted via
kexec()), the peripheral might triger an IRQ before the data structures
are initialised.

Fixes:

[    0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08
[    0.227913] Call trace:
[    0.227918]  svs_isr+0x8c/0x538

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20221127-mtk-svs-v2-0-145b07663ea8@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: add mtk-mutex support for mt8195 vdosys1

Add mtk-mutex support for mt8195 vdosys1.
The vdosys1 path component contains ovl_adaptor, merge5,
and dp_intf1. Ovl_adaptor is composed of several sub-elements
which include MDP_RDMA0~7, MERGE0~3, and ETHDR.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-12-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: add mtk-mutex component - dp_intf1

Add mtk-mutex DDP_COMPONENT_DP_INTF1 component. The MT8195 vdosys1 path
component contains ovl_adaptor, merge5, and dp_intf1. It is a preparation
for adding support for MT8195 vdosys1 path component.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-11-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mmsys: add reset control for MT8195 vdosys1

MT8195 vdosys1 has more than 32 reset bits and a different reset base
than other chips. Add the number of reset bits and reset base in mmsys
private data.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-10-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: mmsys: add mmsys for support 64 reset bits

Add mmsys for support 64 reset bits. It is a preparation for MT8195
vdosys1 HW reset. MT8195 vdosys1 has more than 32 reset bits.

1. Add the number of reset bits in mmsys private data
2. move the whole "reset register code section" behind the
"get mmsys->data" code section for getting the num_resets in mmsys->data.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230113104434.28023-9-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1

Add cmdq support for mtk-mmsys config API.
The mmsys config register settings need to take effect with the other
HW settings(like OVL_ADAPTOR...) at the same vblanking time.

If we use CPU to write the mmsys reg, we can't guarantee all the
settings can be written in the same vblanking time.
Cmdq is used for this purpose. We prepare all the related HW settings
in one cmdq packet. The first command in the packet is "wait stream done",
and then following with all the HW settings. After the cmdq packet is
flush to GCE HW. The GCE waits for the "stream done event" to coming
and then starts flushing all the HW settings. This can guarantee all
the settings flush in the same vblanking.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-8-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1

Add four mmsys config APIs. The config APIs are used for config
mmsys reg. Some mmsys regs need to be set according to the
HW engine binding to the mmsys simultaneously.

1. mtk_mmsys_merge_async_config: config merge async width/height.
   async is used for cross-clock domain synchronization.
2. mtk_mmsys_hdr_confing: config hdr backend async width/height.
3. mtk_mmsys_mixer_in_config and mtk_mmsys_mixer_in_config:
   config mixer related settings.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-7-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: refine code to use mtk_mmsys_update_bits API

Simplify code for update  mmsys reg.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230113104434.28023-6-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: add mtk-mmsys support for mt8195 vdosys1

Add mt8195 vdosys1 routing table to the driver data of mtk-mmsys.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-5-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

soc: mediatek: add mtk-mmsys ethdr and mdp_rdma components

Add new mmsys component: ethdr_mixer and mdp_rdma. These components will
use in mt8195 vdosys1.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230113104434.28023-4-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

dt-bindings: reset: mt8195: add vdosys1 reset control bit

Add vdosys1 reset control bit for MT8195 platform.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230113104434.28023-3-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible for MT8195

Add vdosys1 mmsys compatible for MT8195 platform.

For MT8195, VDOSYS0 and VDOSYS1 are 2 display HW pipelines binding to
2 different power domains, different clock drivers and different
mediatek-drm drivers.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230113104434.28023-2-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Merge tag 'memory-controller-drv-6.3-2' of https://git./linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers

Memory controller drivers for v6.3

1. TI Emif: simplify device_get_match_data().
2. Renesas RPC IF:
   - Few fixes (decouple driver's private data structure from other
     drivers; unbind and rebind due to triggering managed resources
     allocation from other drivers);
   - Bigger rework around improved runtime Power Management.

* tag 'memory-controller-drv-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: ti-emif-pm: Use device_get_match_data() to simplify the code
  memory: renesas-rpc-if: Remove Runtime PM wrappers
  memory: renesas-rpc-if: Pass device instead of rpcif to rpcif_*()
  memory: renesas-rpc-if: Improve Runtime PM handling
  memory: renesas-rpc-if: Always use dev in rpcif_probe()
  memory: renesas-rpc-if: Move resource acquisition to .probe()
  memory: renesas-rpc-if: Split-off private data from struct rpcif

Link: https://lore.kernel.org/r/20230123105330.63709-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-updates-6.3' of git://git./linux/kernel/git/sudeep.holla/linux into soc/drivers

Arm SCMI updates for v6.3

The main addition is a unified userspace interface for SCMI irrespective
of the underlying transport and along with some changed to refactor the
SCMI stack probing sequence.

1. SCMI unified userspace interface

   This is to have a unified way of testing an SCMI platform firmware
   implementation for compliance, fuzzing etc., from the perspective of
   the non-secure OSPM irrespective of the underlying transport supporting
   SCMI. It is just for testing/development and not a feature intended fo
   use in production.

   Currently an SCMI Compliance Suite[1] can only work by injecting SCMI
   messages using the mailbox test driver only which makes it transport
   specific and can't be used with any other transport like virtio,
   smc/hvc, optee, etc. Also the shared memory can be transport specific
   and it is better to even abstract/hide those details while providing
   the userspace access. So in order to scale with any transport, we need
   a unified interface for the same.

   In order to achieve that, SCMI "raw mode support" is being added through
   debugfs which is more configurable as well. A userspace application
   can inject bare SCMI binary messages into the SCMI core stack; such
   messages will be routed by the SCMI regular kernel stack to the backend
   platform firmware using the configured transport transparently. This
   eliminates the to know about the specific underlying transport
   internals that will be taken care of by the SCMI core stack itself.
   Further no additional changes needed in the device tree like in the
   mailbox-test driver.

[1] https://gitlab.arm.com/tests/scmi-tests

2. Refactoring of the SCMI stack probing sequence

   On some platforms, SCMI transport can be provide by OPTEE/TEE which
   introduces certain dependency in the probe ordering. In order to address
   the same, the SCMI bus is split into its own module which continues to
   be initialized at subsys_initcall, while the SCMI core stack, including
   its various transport backends (like optee, mailbox, virtio, smc), is
   now moved into a separate module at module_init level.

   This allows the other possibly dependent subsystems to register and/or
   access SCMI bus well before the core SCMI stack and its dependent
   transport backends.

* tag 'scmi-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
  firmware: arm_scmi: Clarify raw per-channel ABI documentation
  firmware: arm_scmi: Add per-channel raw injection support
  firmware: arm_scmi: Add the raw mode co-existence support
  firmware: arm_scmi: Call raw mode hooks from the core stack
  firmware: arm_scmi: Reject SCMI drivers when configured in raw mode
  firmware: arm_scmi: Add debugfs ABI documentation for raw mode
  firmware: arm_scmi: Add core raw transmission support
  firmware: arm_scmi: Add debugfs ABI documentation for common entries
  firmware: arm_scmi: Populate a common SCMI debugfs root
  debugfs: Export debugfs_create_str symbol
  include: trace: Add platform and channel instance references
  firmware: arm_scmi: Add internal platform/channel identifiers
  firmware: arm_scmi: Move errors defs and code to common.h
  firmware: arm_scmi: Add xfer helpers to provide raw access
  firmware: arm_scmi: Add flags field to xfer
  firmware: arm_scmi: Refactor scmi_wait_for_message_response
  firmware: arm_scmi: Refactor polling helpers
  firmware: arm_scmi: Refactor xfer in-flight registration routines
  firmware: arm_scmi: Split bus and driver into distinct modules
  firmware: arm_scmi: Introduce a new lifecycle for protocol devices
  ...

Link: https://lore.kernel.org/r/20230120162152.1438456-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-drivers-for-v6.3-tag1' of git://git./linux/kernel/git/geert/renesas-devel into soc/drivers

Renesas driver updates for v6.3

  - Add missing A3DUL power domain on R-Car V4H.

* tag 'renesas-drivers-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: r8a779g0-sysc: Add missing A3DUL power domain
  dt-bindings: power: r8a779g0: Add missing A3DUL power domain

Link: https://lore.kernel.org/r/cover.1673702291.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

memory: ti-emif-pm: Use device_get_match_data() to simplify the code

Directly get the match data with device_get_match_data().

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202211171939327684154@zte.com.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

memory: renesas-rpc-if: Remove Runtime PM wrappers

Now the rpcif_{en,dis}able_rpm() wrappers just take a pointer to a
device structure, there is no point in keeping them.  Remove them, and
update the callers to call Runtime PM directly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/d87aa5d7e4a39b18f7e2e0649fee0a45b45d371f.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

memory: renesas-rpc-if: Pass device instead of rpcif to rpcif_*()

Most rpcif_*() API functions do not need access to any other fields in
the rpcif structure than the device pointer.  Simplify dependencies by
passing the device pointer instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/0460fe82ba348cedec7a9a75a8eff762c50e817b.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

memory: renesas-rpc-if: Improve Runtime PM handling

Convert from the deprecated pm_runtime_get_sync() to the new
pm_runtime_resume_and_get(), and add error checking.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6f2bd3b2b3d98c5bed541d969900b2ad04f93943.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

memory: renesas-rpc-if: Always use dev in rpcif_probe()

rpcif_probe() already has a "dev" variable pointing to the right device
structure, so there is no need to take a detour through the platform
device.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/298009c43ad119703f564c0f1864743914b4beeb.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

memory: renesas-rpc-if: Move resource acquisition to .probe()

While the acquired resources are tied to the lifetime of the RPC-IF core
device (through the use of managed resource functions), the actual
resource acquisition is triggered from the HyperBus and SPI child
drivers.  Due to this mismatch, unbinding and rebinding the child
drivers manually fails with -EBUSY:

    # echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/unbind
    # echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/bind
    rpc-if ee200000.spi: can't request region for resource [mem 0xee200000-0xee2001ff]
    rpc-if-hyperflash: probe of rpc-if-hyperflash failed with error -16

The same is true for rpc-if-spi.

Fix this by moving all resource acquisition to the core driver's probe
routine.

Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c1012ef1de799e08a70817ab7313794e2d8d7bfb.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

memory: renesas-rpc-if: Split-off private data from struct rpcif

The rpcif structure is used as a common data structure, shared by the
RPC-IF core driver and by the HyperBus and SPI child drivers.
This poses several problems:
  - Most structure members describe private core driver state, which
    should not be accessible by the child drivers,
  - The structure's lifetime is controlled by the child drivers,
    complicating use by the core driver.

Fix this by moving the private core driver state to its own structure,
managed by the RPC-IF core driver, and store it in the core driver's
private data field.  This requires absorbing the child's platform
device, as that was stored in the driver's private data field before.

Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/09fbb6fa67d5a8cd48a08808c9afa2f6a499aa42.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

soc: renesas: Add PWC support for RZ/V2M

The Renesas RZ/V2M External Power Sequence Controller (PWC)
IP is capable of:
* external power supply on/off sequence generation
* on/off signal generation for the LPDDR4 core power supply (LPVDD)
* key input signals processing
* general-purpose output pins

Add the corresponding device driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230106125816.10600-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge patch series "JH7110 PMU Support"

Walker Chen <walker.chen@starfivetech.com> says:

Add the PMU (Power Management Unit) controller driver for the
StarFive JH7110 SoC. In order to meet low power requirements, PMU is
designed for including multiple PM domains that can be used for power
gating of selected IP blocks for power saving by reduced leakage
current.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

soc: starfive: Add StarFive JH71XX pmu driver

Add pmu driver for the StarFive JH71XX SoC.

As the power domains provider, the Power Management Unit (PMU) is
designed for including multiple PM domains that can be used for power
gating of selected IP blocks for power saving by reduced leakage
current. It accepts software encourage command to switch the power mode
of SoC.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

dt-bindings: power: Add starfive,jh7110-pmu

Add bindings for the Power Management Unit on the StarFive JH7110 SoC.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

firmware: arm_scmi: Clarify raw per-channel ABI documentation

Explain more in detail how the per-channel <m> identifier is chosen.

Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230120122326.1932614-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Add per-channel raw injection support

On a system configured with multiple transport channels, expose a few
additional debugfs per-channel entries to allow a user to explicitly select
which transport channel to use for the SCMI message injection.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-18-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Add the raw mode co-existence support

When the raw support is enabled and configured in co-existence mode the
normal SCMI drivers are allowed to register with the SCMI core and
operate as usual alongside the raw operations.

SCMI normal and raw messages will be kept segregated from each other,
but only at the transaction level. Any further possible interference at
the protocol layer will have instead to be handled by the user to attain
reliable results while using the raw transactions.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-17-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Call raw mode hooks from the core stack

Add a few call sites where, if SCMI raw mode access had been enabled in
Kconfig, the needed SCMI raw initialization and hooks are called.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-16-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Reject SCMI drivers when configured in raw mode

Reject SCMI driver registration when SCMI raw mode support is configured,
so as to avoid interferences between the SCMI raw mode transactions and the
normal SCMI stack operations.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-15-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Add debugfs ABI documentation for raw mode

Add description of the debugfs SCMI raw mode ABI.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-14-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Add core raw transmission support

Add SCMI raw mode support which exposes a userspace interface to allow for
bare SCMI command injection and snooping from userspace.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-13-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Add debugfs ABI documentation for common entries

Add description of the debugfs SCMI common ABI.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-12-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

firmware: arm_scmi: Populate a common SCMI debugfs root

Create a common SCMI debugfs root directory and populate it with some
common SCMI data for each discovered SCMI platform instance if SCMI
debugfs is needed by any configured SCMI facility.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-11-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>