OSDN Git Service
Joey Hess [Fri, 24 Oct 2008 05:48:50 +0000 (01:48 -0400)]
git-daemon: set REMOTE_ADDR to client address
This allows hooks like pre-receive to look at the client's IP
address.
Of course the IP address can't be used to get strong security;
git-daemon isn't the right thing to use if you need that. However,
basic IP address checking can be good enough in some situations.
REMOTE_ADDR is the same environment variable used to communicate the
client's address to CGI scripts.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 22 Oct 2008 19:22:53 +0000 (15:22 -0400)]
submodule: fix some non-portable grep invocations
Not all greps support "-e", but in this case we can easily convert it to a
single extended regex.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Wed, 22 Oct 2008 07:39:47 +0000 (09:39 +0200)]
git-remote: list branches in vertical lists
Previously, branches were listed on a single line in each section. But
if there are many branches, then horizontal, line-wrapped lists are very
inconvenient to scan for a human. This makes the lists vertical, i.e one
branch per line is printed.
Since "git remote" is porcelain, we can easily make this
backwards-incompatible change.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 21 Oct 2008 13:54:19 +0000 (09:54 -0400)]
rm: loosen safety valve for empty files
If a file is different between the working tree copy, the index, and the
HEAD, then we do not allow it to be deleted without --force.
However, this is overly tight in the face of "git add --intent-to-add":
$ git add --intent-to-add file
$ : oops, I don't actually want to stage that yet
$ git rm --cached file
error: 'empty' has staged content different from both the
file and the HEAD (use -f to force removal)
$ git rm -f --cached file
Unfortunately, there is currently no way to distinguish between an empty
file that has been added and an "intent to add" file. The ideal behavior
would be to disallow the former while allowing the latter.
This patch loosens the safety valve to allow the deletion only if we are
deleting the cached entry and the cached content is empty. This covers
the intent-to-add situation, and assumes there is little harm in not
protecting users who have legitimately added an empty file. In many
cases, the file will still be empty, in which case the safety valve does
not trigger anyway (since the content remains untouched in the working
tree). Otherwise, we do remove the fact that no content was staged, but
given that the content is by definition empty, it is not terribly
difficult for a user to recreate it.
However, we still document the desired behavior in the form of two
tests. One checks the correct removal of an intent-to-add file. The other
checks that we still disallow removal of empty files, but is marked as
expect_failure to indicate this compromise. If the intent-to-add feature
is ever extended to differentiate between normal empty files and
intent-to-add files, then the safety valve can be re-tightened.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 22 Oct 2008 00:58:25 +0000 (17:58 -0700)]
Merge branch 'jk/diff-convfilter'
* jk/diff-convfilter:
diff: add filter for converting binary to text
diff: introduce diff.<driver>.binary
diff: unify external diff and funcname parsing code
t4012: use test_cmp instead of cmp
Junio C Hamano [Wed, 22 Oct 2008 00:58:21 +0000 (17:58 -0700)]
Merge branch 'js/maint-fetch-update-head'
* js/maint-fetch-update-head:
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Fix fetch/pull when run without --update-head-ok
Conflicts:
t/t5510-fetch.sh
Junio C Hamano [Wed, 22 Oct 2008 00:58:11 +0000 (17:58 -0700)]
Merge branch 'jc/maint-co-track'
* jc/maint-co-track:
Enhance hold_lock_file_for_{update,append}() API
demonstrate breakage of detached checkout with symbolic link HEAD
Fix "checkout --track -b newbranch" on detached HEAD
Conflicts:
builtin-commit.c
Junio C Hamano [Wed, 22 Oct 2008 00:58:01 +0000 (17:58 -0700)]
Merge branch 'rs/alloc-ref'
* rs/alloc-ref:
make alloc_ref_from_str() the new alloc_ref()
use alloc_ref_from_str() everywhere
add alloc_ref_with_prefix()
Junio C Hamano [Wed, 22 Oct 2008 00:57:56 +0000 (17:57 -0700)]
Merge branch 'jk/fix-ls-files-other'
* jk/fix-ls-files-other:
refactor handling of "other" files in ls-files and status
Junio C Hamano [Tue, 21 Oct 2008 20:48:41 +0000 (13:48 -0700)]
Merge branch 'jc/maint-reset-remove-unmerged-new'
* jc/maint-reset-remove-unmerged-new:
reset --hard/read-tree --reset -u: remove unmerged new paths
Junio C Hamano [Tue, 21 Oct 2008 20:47:22 +0000 (13:47 -0700)]
Merge branch 'maint'
* maint:
GIT 1.6.0.3
rehabilitate 'git index-pack' inside the object store
Junio C Hamano [Tue, 21 Oct 2008 20:37:42 +0000 (13:37 -0700)]
GIT 1.6.0.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Tue, 21 Oct 2008 01:17:07 +0000 (21:17 -0400)]
rehabilitate 'git index-pack' inside the object store
Before commit
d0b92a3f6e it was possible to run 'git index-pack'
directly in the .git/objects/pack/ directory. Restore that ability.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 21 Oct 2008 06:40:21 +0000 (23:40 -0700)]
Merge branch 'maint'
* maint:
Fix testcase failure when extended attributes are in use
Lee Marlow [Mon, 20 Oct 2008 17:35:31 +0000 (11:35 -0600)]
workflows documentation: fix link to git-request-pull[1]
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lee Marlow [Mon, 20 Oct 2008 17:31:38 +0000 (11:31 -0600)]
bash completion: Add 'workflows' to 'git help'
Completion for new workflow documentation introduced in
f948dd8
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 21 Oct 2008 05:16:09 +0000 (22:16 -0700)]
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Turn short SHA1 names into links too
gitk: Regenerate .po files
gitk: New way of constructing menus that allows for Alt+letter accelerators
gitk: Bind Key-Return to create on new branch dialog
gitk: Fix binding for <Return> in sha1 entry field
gitk: Clean up file encoding code and add enable/disable option
gitk: Implement batch lookup and caching of encoding attrs
gitk: Enhance file encoding support
gitk: Add untranslated error messages to translation
gitk: Fix a bug in collapsing deeply nested trees
gitk: Use <Button-2> for context menus on OSX
Jeff King [Tue, 21 Oct 2008 00:36:25 +0000 (20:36 -0400)]
document "intent to add" option to git-add
This was added by
3942581 but never documented.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Mackerras [Mon, 20 Oct 2008 23:18:12 +0000 (10:18 +1100)]
gitk: Turn short SHA1 names into links too
This changes the link detection logic to accept strings of between 6
and 40 hex characters as a possible SHA1 ID of another commit, rather
than insisting on seeing the full 40 hex characters.
To make the logic that turns a possible link into an actual link work
with abbreviated IDs, this changes the way the commitinterest array is
used, and puts the code that deals with it in a pair of new functions.
The commitinterest array is now indexed by just the first 4 characters
of the interesting SHA1 ID, and each element is a list of id + command
pairs. This also pulls out the logic for expanding an abbreviated
SHA1 to the list of matching full IDs into its own function (the way
it is done is still the same slow way it was done before, which should
be improved some day).
This also fixes the bug where clicking on a link would take you to the
wrong commit if the line number of the target had changed since the
link was made.
This is based on a patch by Linus Torvalds, but totally rewritten by me.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano [Mon, 20 Oct 2008 05:51:17 +0000 (22:51 -0700)]
Fix testcase failure when extended attributes are in use
06cbe855 (Make core.sharedRepository more generic, 2008-04-16) made
several testcases in t1301-shared-repo.sh which fail if on a system
which creates files with extended attributes (e.g. SELinux), since ls
appends a '+' sign to the permission set in such cases. In fact,
POSIX.1 allows ls to add a single printable character after the usual
3x3 permission bits to show that an optional alternate/additional access
method is associated with the path.
This fixes the testcase to strip any such sign prior to verifying the
permission set.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Deskin Miller <deskinm@umich.edu>
Junio C Hamano [Sun, 19 Oct 2008 23:07:29 +0000 (16:07 -0700)]
Merge branch 'sh/maint-rebase3'
* sh/maint-rebase3:
rebase--interactive: fix parent rewriting for dropped commits
Junio C Hamano [Sun, 19 Oct 2008 23:07:23 +0000 (16:07 -0700)]
Merge branch 'tr/workflow-doc'
* tr/workflow-doc:
Documentation: add manpage about workflows
Documentation: Refer to git-rebase(1) to warn against rewriting
Documentation: new upstream rebase recovery section in git-rebase
Junio C Hamano [Sun, 19 Oct 2008 23:07:07 +0000 (16:07 -0700)]
Merge branch 'mv/clonev'
* mv/clonev:
Implement git clone -v
Junio C Hamano [Sun, 19 Oct 2008 23:07:02 +0000 (16:07 -0700)]
Merge branch 'ml/cygwin-filemode'
* ml/cygwin-filemode:
compat/cygwin.c - Use cygwin's stat if core.filemode == true
Junio C Hamano [Sun, 19 Oct 2008 23:06:53 +0000 (16:06 -0700)]
Merge branch 'gb/refactor-pathinfo'
* gb/refactor-pathinfo:
gitweb: refactor input parameters parse/validation
Junio C Hamano [Sun, 19 Oct 2008 23:06:47 +0000 (16:06 -0700)]
Merge branch 'dp/checkattr'
* dp/checkattr:
git-check-attr(1): use 'verse' for multi-line synopsis sections
check-attr: Add --stdin option
check-attr: add an internal check_attr() function
Junio C Hamano [Sun, 19 Oct 2008 23:06:44 +0000 (16:06 -0700)]
Merge branch 'gb/formatpatch-autonbr'
* gb/formatpatch-autonbr:
format-patch: autonumber by default
Junio C Hamano [Sun, 19 Oct 2008 23:06:39 +0000 (16:06 -0700)]
Merge branch 'sp/describe-lwtag'
* sp/describe-lwtag:
describe: Make --tags and --all match lightweight tags more often
Junio C Hamano [Sun, 19 Oct 2008 23:06:31 +0000 (16:06 -0700)]
Merge branch 'ae/preservemerge'
* ae/preservemerge:
rebase: Support preserving merges in non-interactive mode
Junio C Hamano [Sun, 19 Oct 2008 23:06:21 +0000 (16:06 -0700)]
Merge branch 'mv/merge-noff'
* mv/merge-noff:
builtin-commit: use reduce_heads() only when appropriate
Conflicts:
builtin-commit.c
t/t7600-merge.sh
Junio C Hamano [Sun, 19 Oct 2008 23:05:58 +0000 (16:05 -0700)]
Merge branch 'ns/rebase-noverify'
* ns/rebase-noverify:
rebase: Document --no-verify option to bypass pre-rebase hook
rebase --no-verify
Junio C Hamano [Sun, 19 Oct 2008 22:53:46 +0000 (15:53 -0700)]
Merge branch 'maint'
* maint:
Documentation: Clarify '--signoff' for git-commit
Junio C Hamano [Sun, 19 Oct 2008 22:32:35 +0000 (15:32 -0700)]
Fix mismerge at
cdb22c4 in builtin-checkout.c
The code to complain when -b is not given but an explicit --track/--no-track
override was given from the command line was unchanged on one branch and
reworked on the other branch. The merge result incorrectly kept it.
Spotted by Matt McCutchen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matt McCutchen [Sun, 19 Oct 2008 00:40:50 +0000 (20:40 -0400)]
git-merge-recursive: honor merge.conflictstyle once again
This was originally implemented in
c236bcd06138bcbc929b86ad1a513635bf4847b2
but was lost to a mismerge in
9ba929ed652f5ed7707f1c684999af4ad02c4925.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Sun, 19 Oct 2008 15:20:21 +0000 (17:20 +0200)]
Documentation: add manpage about workflows
This attempts to make a manpage about workflows that is both handy to
point people at it and as a beginner's introduction.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fredrik Skolmli [Sun, 19 Oct 2008 16:09:43 +0000 (18:09 +0200)]
Documentation: Spelling fix
Signed-off-by: Fredrik Skolmli <fredrik@frsk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 19 Oct 2008 19:38:50 +0000 (12:38 -0700)]
Merge branch 'pb/rename-rowin32'
* pb/rename-rowin32:
Do not rename read-only files during a push
Looks-fine-to-me-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Johannes Sixt <johannes.sixt@telecom.at>
Junio C Hamano [Fri, 17 Oct 2008 22:44:39 +0000 (15:44 -0700)]
Enhance hold_lock_file_for_{update,append}() API
This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 17 Oct 2008 22:56:11 +0000 (15:56 -0700)]
demonstrate breakage of detached checkout with symbolic link HEAD
When core.prefersymlinkrefs is in use, detaching the HEAD by
checkout incorrectly clobbers the tip of the current branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Abhijit Bhopatkar [Sun, 19 Oct 2008 04:19:23 +0000 (09:49 +0530)]
Documentation: Clarify '--signoff' for git-commit
'--signoff' uses commiter name always to add the signoff line,
make it explicit in the documentation.
Signed-off-by: Abhijit Bhopatkar <bain@devslashzero.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 15 Oct 2008 23:00:06 +0000 (16:00 -0700)]
reset --hard/read-tree --reset -u: remove unmerged new paths
When aborting a failed merge that has brought in a new path using "git
reset --hard" or "git read-tree --reset -u", we used to first forget about
the new path (via read_cache_unmerged) and then matched the working tree
to what is recorded in the index, thus ending up leaving the new path in
the work tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 18 Oct 2008 15:30:39 +0000 (08:30 -0700)]
Update draft release notes for 1.6.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 18 Oct 2008 15:26:44 +0000 (08:26 -0700)]
Merge branch 'maint'
* maint:
Hopefully the final draft release notes update before 1.6.0.3
diff(1): clarify what "T"ypechange status means
contrib: update packinfo.pl to not use dashed commands
force_object_loose: Fix memory leak
tests: shell negation portability fix
Junio C Hamano [Sat, 18 Oct 2008 15:26:39 +0000 (08:26 -0700)]
Hopefully the final draft release notes update before 1.6.0.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 18 Oct 2008 15:20:51 +0000 (08:20 -0700)]
diff(1): clarify what "T"ypechange status means
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 18 Oct 2008 15:18:11 +0000 (08:18 -0700)]
Merge branch 'db/maint-checkout-b' into maint
* db/maint-checkout-b:
Check early that a new branch is new and valid
Jeff King [Sun, 5 Oct 2008 21:43:45 +0000 (17:43 -0400)]
diff: add filter for converting binary to text
When diffing binary files, it is sometimes nice to see the
differences of a canonical text form rather than either a
binary patch or simply "binary files differ."
Until now, the only option for doing this was to define an
external diff command to perform the diff. This was a lot of
work, since the external command needed to take care of
doing the diff itself (including mode changes), and lost the
benefit of git's colorization and other options.
This patch adds a text conversion option, which converts a
file to its canonical format before performing the diff.
This is less flexible than an arbitrary external diff, but
is much less work to set up. For example:
$ echo '*.jpg diff=exif' >>.gitattributes
$ git config diff.exif.textconv exiftool
$ git config diff.exif.binary false
allows one to see jpg diffs represented by the text output
of exiftool.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Sun, 5 Oct 2008 21:43:36 +0000 (17:43 -0400)]
diff: introduce diff.<driver>.binary
The "diff" gitattribute is somewhat overloaded right now. It
can say one of three things:
1. this file is definitely binary, or definitely not
(i.e., diff or !diff)
2. this file should use an external diff engine (i.e.,
diff=foo, diff.foo.command = custom-script)
3. this file should use particular funcname patterns
(i.e., diff=foo, diff.foo.(x?)funcname = some-regex)
Most of the time, there is no conflict between these uses,
since using one implies that the other is irrelevant (e.g.,
an external diff engine will decide for itself whether the
file is binary).
However, there is at least one conflicting situation: there
is no way to say "use the regular rules to determine whether
this file is binary, but if we do diff it textually, use
this funcname pattern." That is, currently setting diff=foo
indicates that the file is definitely text.
This patch introduces a "binary" config option for a diff
driver, so that one can explicitly set diff.foo.binary. We
default this value to "don't know". That is, setting a diff
attribute to "foo" and using "diff.foo.funcname" will have
no effect on the binaryness of a file. To get the current
behavior, one can set diff.foo.binary to true.
This patch also has one additional advantage: it cleans up
the interface to the userdiff code a bit. Before, calling
code had to know more about whether attributes were false,
true, or unset to determine binaryness. Now that binaryness
is a property of a driver, we can represent these situations
just by passing back a driver struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Sun, 5 Oct 2008 21:43:21 +0000 (17:43 -0400)]
diff: unify external diff and funcname parsing code
Both sets of code assume that one specifies a diff profile
as a gitattribute via the "diff=foo" attribute. They then
pull information about that profile from the config as
diff.foo.*.
The code for each is currently completely separate from the
other, which has several disadvantages:
- there is duplication as we maintain code to create and
search the separate lists of external drivers and
funcname patterns
- it is difficult to add new profile options, since it is
unclear where they should go
- the code is difficult to follow, as we rely on the
"check if this file is binary" code to find the funcname
pattern as a side effect. This is the first step in
refactoring the binary-checking code.
This patch factors out these diff profiles into "userdiff"
drivers. A file with "diff=foo" uses the "foo" driver, which
is specified by a single struct.
Note that one major difference between the two pieces of
code is that the funcname patterns are always loaded,
whereas external drivers are loaded only for the "git diff"
porcelain; the new code takes care to retain that situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Sun, 5 Oct 2008 21:42:35 +0000 (17:42 -0400)]
t4012: use test_cmp instead of cmp
This makes erroneous output slightly easier to see. We also
flip the argument order to match our usual style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brian Gernhardt [Thu, 2 Oct 2008 20:55:39 +0000 (16:55 -0400)]
format-patch: autonumber by default
format-patch is most commonly used for multiple patches at once when
sending a patchset, in which case we want to number the patches; on
the other hand, single patches are not usually expected to be
numbered.
In other words, the typical behavior expected from format-patch is the
one obtained by enabling autonumber, so we set it to be the default.
Users that want to disable numbering for a particular patchset can do
so with the existing -N command-line switch. Users that want to
change the default behavior can use the format.numbering config key.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Test-updates-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Petr Baudis [Fri, 3 Oct 2008 10:20:43 +0000 (12:20 +0200)]
Do not rename read-only files during a push
Win32 does not allow renaming read-only files (at least on a Samba
share), making push into a local directory to fail. Thus, defer
the chmod() call in index-pack.c:final() only after
move_temp_to_file() was called.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Sat, 18 Oct 2008 14:07:23 +0000 (07:07 -0700)]
Merge branch 'pb/commit-where'
* pb/commit-where:
tutorial: update output of git commit
reformat informational commit message
git commit: Reformat output somewhat
builtin-commit.c: show on which branch a commit was added
René Scharfe [Sat, 18 Oct 2008 08:44:18 +0000 (10:44 +0200)]
make alloc_ref_from_str() the new alloc_ref()
With all calls to alloc_ref() gone, we can remove it and then we're free
to give alloc_ref_from_str() the shorter name. It's a much nicer
interface, as the callers always need to have a name string when they
allocate a ref anyway and don't need to calculate and pass its length+1
any more.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 18 Oct 2008 08:41:33 +0000 (10:41 +0200)]
use alloc_ref_from_str() everywhere
Replace pairs of alloc_ref() and strcpy() with alloc_ref_from_str(),
simplifying the code.
In connect.c, also a pair of alloc_ref() and memcpy() is replaced --
the additional cost of a strlen() call should not have too much of an
impact. Consistency and simplicity are more important.
In remote.c, the code was allocating 11 bytes more than needed for
the name part, but I couldn't see them being used for anything.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 18 Oct 2008 08:37:40 +0000 (10:37 +0200)]
add alloc_ref_with_prefix()
In three cases in remote.c, a "raw" ref is allocated using alloc_ref()
and then its is constructed using sprintf(). Clean it up by adding a
helper function, alloc_ref_with_prefix(), which creates a composite
name. Use it in alloc_ref_from_str(), too, as it simplifies the code.
Open code alloc_ref() in alloc_ref_with_prefix(), as the former is
going to be removed in the patch after the next.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dan McGee [Sat, 18 Oct 2008 02:41:18 +0000 (21:41 -0500)]
contrib: update packinfo.pl to not use dashed commands
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Björn Steinbrink [Sat, 18 Oct 2008 00:37:31 +0000 (02:37 +0200)]
force_object_loose: Fix memory leak
read_packed_sha1 expectes its caller to free the buffer it returns, which
force_object_loose didn't do.
This leak is eventually triggered by "git gc", when it is manually invoked
or there are too many packs around, making gc totally unusable when there
are lots of unreachable objects.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Mackerras [Sat, 18 Oct 2008 05:24:46 +0000 (16:24 +1100)]
gitk: Regenerate .po files
This is the result of running make update-po and removing or fixing
the strings that were fuzzily matched. The ones that were fixed were
the ones where the only change was "git rev-list" to "git log", and
the "about gitk" message where the copyright year got updated.
To get xgettext to see the menu labels as needing translation, it
was necessary for arrange for them to be preceded by "mc". This
therefore changes makemenu to ignore the first element in each
menu item so that it can be "mc" in the makemenu call.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano [Fri, 17 Oct 2008 06:37:44 +0000 (23:37 -0700)]
Fix "checkout --track -b newbranch" on detached HEAD
The test to make sure that checkout fails when --track was asked for and
we cannot set up tracking information in t7201 was wrong, and it turns out
that the implementation for that feature itself was buggy. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 17 Oct 2008 20:03:52 +0000 (13:03 -0700)]
Merge branch 'jk/maint-ls-files-other' into jk/fix-ls-files-other
* jk/maint-ls-files-other:
refactor handling of "other" files in ls-files and status
Conflicts:
read-cache.c
Jeff King [Thu, 16 Oct 2008 15:07:26 +0000 (11:07 -0400)]
refactor handling of "other" files in ls-files and status
When the "git status" display code was originally converted
to C, we copied the code from ls-files to discover whether a
pathname returned by read_directory was an "other", or
untracked, file.
Much later,
5698454e updated the code in ls-files to handle
some new cases caused by gitlinks. This left the code in
wt-status.c broken: it would display submodule directories
as untracked directories. Nobody noticed until now, however,
because unless status.showUntrackedFiles was set to "all",
submodule directories were not actually reported by
read_directory. So the bug was only triggered in the
presence of a submodule _and_ this config option.
This patch pulls the ls-files code into a new function,
cache_name_is_other, and uses it in both places. This should
leave the ls-files functionality the same and fix the bug
in status.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Mon, 13 Oct 2008 14:39:46 +0000 (07:39 -0700)]
describe: Make --tags and --all match lightweight tags more often
If the caller supplies --tags they want the lightweight, unannotated
tags to be searched for a match. If a lightweight tag is closer
in the history, it should be matched, even if an annotated tag is
reachable further back in the commit chain.
The same applies with --all when matching any other type of ref.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-By: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 13 Oct 2008 09:35:59 +0000 (05:35 -0400)]
tests: shell negation portability fix
Commit
969c8775 introduced a test which uses the non-portable construct:
command1 && ! command2 | command3
which must be
command1 && ! (command2 | command3)
to work on bsd shells (this is another example of
bbf08124, which fixed
several similar cases).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 14 Oct 2008 22:32:20 +0000 (15:32 -0700)]
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Some misguided documents floating on the Net suggest this sequence:
mkdir newdir && cd newdir
git init
git remote add origin $url
git pull origin master:master
"git pull" has known about misguided "pull" that lets the underlying fetch
update the current branch for a long time. It also has known about
"git pull origin master" into a branch yet to be born.
These two workarounds however were not aware of the existence of each
other and did not work well together. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paul Mackerras [Fri, 17 Oct 2008 11:44:42 +0000 (22:44 +1100)]
gitk: New way of constructing menus that allows for Alt+letter accelerators
This is inspired by patches from Robin Rosenberg but takes a different
approach. This adds a "makemenu" procedure for constructing menus
that allows the menu layout to be specified in a clear fashion, and
provides one place where the alt+letter accelerators can be detected
and handled.
The alt+letter accelerator is specified by putting an ampersand (&)
before the letter for the accelerator in the menu item name. (Two
ampersands in succession produce one ampersand in the menu item as
it appears on screen.) This is handled in makemenu.
We also add an mca procedure which is like mc but also does the
ampersand translation, for use when we want to refer to a menu item
by name. The mca name and the locations where we use it were
shamelessly stolen from Robin Rosenberg's patch.
This doesn't actually add any alt+letter accelerators yet.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano [Fri, 17 Oct 2008 08:52:32 +0000 (01:52 -0700)]
Merge branch 'maint'
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Conflicts:
t/t7600-merge.sh
Matt McCutchen [Fri, 17 Oct 2008 02:32:14 +0000 (22:32 -0400)]
t1301-shared-repo.sh: don't let a default ACL interfere with the test
This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail. To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephen Haberman [Mon, 6 Oct 2008 04:26:52 +0000 (23:26 -0500)]
rebase--interactive: fix parent rewriting for dropped commits
`rebase -i -p` got its rev-list of commits to keep by --left-right and
--cherry-pick. Adding --cherry-pick would drop commits that duplicated changes
already in the rebase target.
The dropped commits were then forgotten about when it came to rewriting the
parents of their descendents, so the descendents would get cherry-picked with
their old, unwritten parents and essentially make the rebase a no-op.
This commit adds a $DOTEST/dropped directory to remember dropped commits and
rewrite their children's parent as the dropped commit's possibly-rewritten
first-parent.
Signed-off-by: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jonas Fonseca [Wed, 15 Oct 2008 07:11:52 +0000 (09:11 +0200)]
git-check-attr(1): use 'verse' for multi-line synopsis sections
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonas Fonseca [Wed, 15 Oct 2008 07:10:58 +0000 (09:10 +0200)]
git-check-attr(1): add output and example sections
Plumbing tools should document what output can be expected.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Wed, 1 Oct 2008 19:28:26 +0000 (14:28 -0500)]
xdiff-interface.c: strip newline (and cr) from line before pattern matching
POSIX doth sayeth:
"In the regular expression processing described in IEEE Std 1003.1-2001,
the <newline> is regarded as an ordinary character and both a period and
a non-matching list can match one. ... Those utilities (like grep) that
do not allow <newline>s to match are responsible for eliminating any
<newline> from strings before matching against the RE."
Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brandon Casey [Thu, 16 Oct 2008 00:58:50 +0000 (19:58 -0500)]
t4018-diff-funcname: demonstrate end of line funcname matching flaw
Since the newline is not removed from lines before pattern matching, a
pattern cannot match to the end of the line using the '$' operator without
using an additional operator which will indirectly match the '\n' character.
Introduce a test which should pass, but which does not due to this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Thu, 16 Oct 2008 00:58:49 +0000 (19:58 -0500)]
t4018-diff-funcname: rework negated last expression test
This test used the non-zero exit status of 'git diff' to indicate that a
negated funcname pattern, when placed last, was correctly rejected.
The problem with this is that 'git diff' always returns non-zero if it
finds differences in the files it is comparing, and the files must
contain differences in order to trigger the funcname pattern codepath.
Instead of checking for non-zero exit status, make sure the expected
error message is printed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mikael Magnusson [Fri, 19 Sep 2008 13:48:08 +0000 (15:48 +0200)]
Typo "does not exists" when git remote update remote.
Richard Quirk [Tue, 14 Oct 2008 20:53:25 +0000 (22:53 +0200)]
gitk: Bind Key-Return to create on new branch dialog
The Return key can now be used as well as pressing the Create button
from the dialog box that is shown when selecting "Create new branch".
Signed-off-by: Richard Quirk <richard.quirk@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Wed, 15 Oct 2008 22:57:02 +0000 (09:57 +1100)]
gitk: Fix binding for <Return> in sha1 entry field
This adds a break so that gitk doesn't go and execute the global
binding for <Return> (i.e. find next) when the user presses the
return key in the sha1 entry field to indicate that gitk should
jump to the commit identified by what they just put into the
sha1 field.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Wed, 15 Oct 2008 11:23:03 +0000 (22:23 +1100)]
gitk: Clean up file encoding code and add enable/disable option
This adds an option allowing the user to select whether gitk should
look up per-file encoding settings using git check-attr or not. If
not, gitk uses the global encoding set in the git config (as reported
by git config --get gui.encoding) for all files, or if that is not
set, then the system encoding.
The option is controlled by a checkbox in the Edit->Preferences
window, and defaults to off for now because git check-attr is so
slow. When the user turns it on we discard any cached diff file
lists in treediffs, because we may not have encodings cached for
the files listed in those lists, meaning that getblobdiffline will
do it for each file, which will be really really slow.
This adjusts the limit of how many paths cache_gitattr passes to each
instance of git check-attr depending on whether we're running under
windows or not. Passing only 30 doesn't effectively amortize the
startup costs of git check-attr, but it's all we can do under windows
because of the 32k limit on arguments to a command. Under other OSes
we pass up to 1000.
Similarly we adjust how many lines gettreediffline processes depending
on whether we are doing per-file encodings so that we don't run for
too long. When we are, 500 seems to be a reasonable limit, leading
to gettreediffline taking about 60-70ms under Linux (almost all of
which is in cache_gitattr, unfortunately). This means that we can
take out the update call in cache_gitattr.
This adds a simple cache on [tclencoding]. Now that we get repeated
calls to translate the same encoding, this is useful.
This reindents the new code added in the last couple of commits to
conform to the gitk 4-space indent and makes various other improvements:
use regexp in gitattr and cache_gitattr instead of split + join + regsub,
make gui_encoding be the value from [tclencoding] to avoid having to
do [tcl_encoding $gui_encoding] in each call to get_path_encoding,
and print a warning message at startup if $gui_encoding isn't
supported by Tcl.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Brandon Casey [Tue, 14 Oct 2008 20:30:21 +0000 (15:30 -0500)]
remote.c: correct the check for a leading '/' in a remote name
This test is supposed to disallow remote entries in the config file of the
form:
[remote "/foobar"]
...
The leading slash in '/foobar' is not acceptable.
Instead it was incorrectly testing that the subkey had no leading '/', which
had no effect since the subkey pointer was made to point at a '.' in the
preceding lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Mon, 13 Oct 2008 20:54:25 +0000 (22:54 +0200)]
Add testcase to ensure merging an early part of a branch is done properly
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nanako Shiraishi [Mon, 13 Oct 2008 23:17:16 +0000 (08:17 +0900)]
rebase: Document --no-verify option to bypass pre-rebase hook
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Miklos Vajna [Tue, 14 Oct 2008 14:42:45 +0000 (16:42 +0200)]
Add Linux PPC support to the pre-auto-gc example hook
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Tue, 14 Oct 2008 20:22:10 +0000 (15:22 -0500)]
t4018-diff-funcname: add objective-c xfuncname pattern to syntax test
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alexander Gavrilov [Mon, 13 Oct 2008 08:12:33 +0000 (12:12 +0400)]
gitk: Implement batch lookup and caching of encoding attrs
When the diff contains thousands of files, calling git-check-attr once
per file is very slow. With this patch gitk does attribute lookup in
batches of 30 files while reading the diff file list, which leads to a
very noticeable speedup.
It may be possible to reimplement this even more efficiently, if
git-check-attr is modified to support a --stdin-paths option.
Additionally, it should quote the ':' character in file paths, or
provide a more robust way of column separation.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Alexander Gavrilov [Mon, 13 Oct 2008 08:12:31 +0000 (12:12 +0400)]
gitk: Enhance file encoding support
This allows the encoding to be specified for file contents and used
when displaying files and diffs in the bottom-left pane. When
displaying diffs, the encoding for each diff hunk is that for the file
that the diff hunk is from, so it can change through the course of the
diff.
The encoding for file contents is determined as follows:
- File encoding defaults to the system encoding.
- It can be overridden by setting the gui.encoding option.
- Finally, the 'encoding' attribute is checked on
per-file basis; it has the last word.
Note: Since git-check-attr does not provide support for reading
attributes from trees, attribute lookup is done using files from the
working directory.
This also extends the range of supported encoding names, adding
ShiftJIS and Shift-JIS as aliases for Shift_JIS, and allowing
cp-*, cp_*, ibm-*, ibm_*, jis-* and jis_* as aliases for cp*,
ibm* and jis* respectively.
This also fixes some bugs in handling of non-ASCII filenames. Core
git apparently supports only locale-encoded filenames, so processing
is done using the system encoding.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano [Tue, 14 Oct 2008 00:05:45 +0000 (17:05 -0700)]
Update draft release notes to 1.6.1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 13 Oct 2008 22:41:49 +0000 (15:41 -0700)]
Merge branch 'maint'
* maint:
Update draft release notes to 1.6.0.3
Junio C Hamano [Mon, 13 Oct 2008 22:41:36 +0000 (15:41 -0700)]
Update draft release notes to 1.6.0.3
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Levedahl [Mon, 13 Oct 2008 04:33:31 +0000 (00:33 -0400)]
compat/cygwin.c - Use cygwin's stat if core.filemode == true
Cygwin's POSIX emulation allows use of core.filemode true, unlike native
Window's implementation of stat / lstat, and Cygwin/git users who have
configured core.filemode true in various repositories will be very
unpleasantly surprised to find that git is no longer honoring that option.
So, this patch forces use of Cygwin's stat functions if core.filemode is
set true, regardless of any other considerations.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Schindelin [Mon, 13 Oct 2008 09:36:52 +0000 (11:36 +0200)]
Fix fetch/pull when run without --update-head-ok
Some confusing tutorials suggested that it would be a good idea to fetch
into the current branch with something like this:
git fetch origin master:master
(or even worse: the same command line with "pull" instead of "fetch").
While it might make sense to store what you want to pull, it typically is
plain wrong when the current branch is "master". This should only be
allowed when (an incorrect) "git pull origin master:master" tries to work
around by giving --update-head-ok to underlying "git fetch", and otherwise
we should refuse it, but somewhere along the lines we lost that behavior.
The check for the current branch is now _only_ performed in non-bare
repositories, which is an improvement from the original behaviour.
Some newer tests were depending on the broken behaviour of "git fetch"
this patch fixes, and have been adjusted.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 13 Oct 2008 09:35:59 +0000 (05:35 -0400)]
tests: shell negation portability fix
Commit
969c8775 introduced a test which uses the non-portable construct:
command1 && ! command2 | command3
which must be
command1 && ! (command2 | command3)
to work on bsd shells (this is another example of
bbf08124, which fixed
several similar cases).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giuseppe Bilotta [Fri, 10 Oct 2008 18:42:26 +0000 (20:42 +0200)]
gitweb: refactor input parameters parse/validation
Since input parameters can be obtained both from CGI parameters and
PATH_INFO, we would like most of the code to be agnostic about the way
parameters were retrieved. We thus collect all the parameters into the
new %input_params hash, delaying validation after the collection is
completed.
Although the kludge removal is minimal at the moment, it makes life much
easier for future expansions such as more extensive PATH_INFO use or
other form of input such as command-line support.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Dmitry Potapov [Tue, 7 Oct 2008 00:16:52 +0000 (04:16 +0400)]
check-attr: Add --stdin option
This allows multiple paths to be specified on stdin.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Dmitry Potapov [Tue, 7 Oct 2008 00:14:18 +0000 (04:14 +0400)]
check-attr: add an internal check_attr() function
This step is preparation to introducing --stdin-paths option.
I have also added maybe_flush_or_die() at the end of main() to ensure that
we exit with the zero code only when we flushed the output successfully.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 12 Oct 2008 20:21:17 +0000 (13:21 -0700)]
Merge branch 'maint'
* maint:
test-lib: fix broken printf
git apply --directory broken for new files
Shawn O. Pearce [Sun, 12 Oct 2008 20:13:59 +0000 (13:13 -0700)]
test-lib: fix broken printf
b8eecafd888d219633f4c29e8b6a90fc21a46dfd introduced usage of
printf without a format string.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Matt McCutchen [Sat, 11 Oct 2008 01:56:15 +0000 (21:56 -0400)]
"git diff <tree>{3,}": do not reverse order of arguments
According to the message of commit
0fe7c1de16f71312e6adac4b85bddf0d62a47168,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brandon Casey [Thu, 9 Oct 2008 19:12:12 +0000 (14:12 -0500)]
Replace calls to strbuf_init(&foo, 0) with STRBUF_INIT initializer
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Dmitry Potapov [Sat, 11 Oct 2008 16:39:37 +0000 (20:39 +0400)]
print an error message for invalid path
If verification of path failed, it is always better to print an
error message saying this than relying on the caller function to
print a meaningful error message (especially when the callee already
prints error message for another situation).
Because the callers of add_index_entry_with_check() did not print
any error message, it resulted that the user would not notice the
problem when checkout of an invalid path failed.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Thomas Rast [Sun, 12 Oct 2008 11:21:48 +0000 (13:21 +0200)]
Documentation: remove stale howto/rebase-and-edit.txt
The "rebase and edit" howto predates the much easier solution 'git
rebase -i' by two years.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>