OSDN Git Service
Michael S. Tsirkin [Mon, 16 Nov 2015 11:55:53 +0000 (13:55 +0200)]
vhost-user: print original request on error
When we get an unexpected response, print out
the original request.
Helps debug protocol errors tremendously.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Mon, 16 Nov 2015 11:33:36 +0000 (13:33 +0200)]
vhost-user-test: support VHOST_USER_SET_VRING_ENABLE
vhost-user-test is broken now: it assumes
QEMU sends RESET_OWNER, and we stopped doing that.
Wait for ENABLE_RING with 0 instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael S. Tsirkin [Sun, 15 Nov 2015 19:25:11 +0000 (21:25 +0200)]
vhost-user: update spec description
Clarify logging setup to make sure all clients comply in a way that is
future-proof. Document how rings are started/stopped.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Victor Kaplansky <victork@redhat.com>
Yuanhan Liu [Fri, 13 Nov 2015 07:24:10 +0000 (15:24 +0800)]
vhost: don't send RESET_OWNER at stop
First of all, RESET_OWNER message is sent incorrectly, as it's sent
before GET_VRING_BASE. And the reset message would let the later call
get nothing correct.
And, sending SET_VRING_ENABLE at stop, which has already been done,
makes more sense than RESET_OWNER.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yuanhan Liu [Fri, 13 Nov 2015 07:24:09 +0000 (15:24 +0800)]
vhost: let SET_VRING_ENABLE message depends on protocol feature
But not depend on PROTOCOL_F_MQ feature bit. So that we could use
SET_VRING_ENABLE to sign the backend on stop, even if MQ is disabled.
That's reasonable, since we will have one queue pair at least.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Fri, 13 Nov 2015 17:10:36 +0000 (17:10 +0000)]
Update version for v2.5.0-rc0 release
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guenter Roeck [Thu, 12 Nov 2015 17:54:55 +0000 (09:54 -0800)]
hw/misc: Add support for ADC controller in Xilinx Zynq 7000
Add support for the Xilinx XADC core used in Zynq 7000.
References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
Dual 12-Bit 1 MSPS Analog-to-Digital Converter
Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
* Changed macro names to match TRM where possible
* Made programmers model macro scheme consistent
* Dropped XADC_ZYNQ_ prefix on local macros
* Fix ALM field width
* Update threshold-comparison interrupts in _update_ints()
* factored out DFIFO pushes into helper. Renamed to "push/pop"
* Changed xadc_reg to 10 bits and added OOB check.
* Reduced scope of MCTL reset to just stop channel coms.
* Added dummy read data to write commands
* Changed _ to - seperators in string names and filenames
* Dropped ------------ in header comment
* Catchall'ed _update_ints() in _write handler.
* Minor whitespace changes.
* Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 12 Nov 2015 18:08:19 +0000 (18:08 +0000)]
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/
20151112' into staging
migration/next for
20151112
# gpg: Signature made Thu 12 Nov 2015 16:56:44 GMT using RSA key ID
5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/
20151112:
migration_init: Fix lock initialisation/make it explicit
migrate-start-postcopy: Improve text
Postcopy: Fix TP!=HP zero case
Finish non-postcopiable iterative devices before package
migration: Make 32bit linux compile with RDMA
migration: print ram_addr_t as RAM_ADDR_FMT not %zx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 12 Nov 2015 17:22:06 +0000 (17:22 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches (rebased Stefan's pull request)
# gpg: Signature made Thu 12 Nov 2015 15:34:16 GMT using RSA key ID
C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (43 commits)
block: Update copyright of the accounting code
scsi-disk: Account for failed operations
macio: Account for failed operations
ide: Account for failed and invalid operations
atapi: Account for failed and invalid operations
xen_disk: Account for failed and invalid operations
virtio-blk: Account for failed and invalid operations
nvme: Account for failed and invalid operations
iotests: Add test for the block device statistics
block: Use QEMU_CLOCK_VIRTUAL for the accounting code in qtest mode
qemu-io: Account for failed, invalid and flush operations
block: New option to define the intervals for collecting I/O statistics
block: Add average I/O queue depth to BlockDeviceTimedStats
block: Compute minimum, maximum and average I/O latencies
block: Allow configuring whether to account failed and invalid ops
block: Add statistics for failed and invalid I/O operations
block: Add idle_time_ns to BlockDeviceStats
util: Infrastructure for computing recent averages
block: define 'clock_type' for the accounting code
ide: Account for write operations correctly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dr. David Alan Gilbert [Thu, 12 Nov 2015 15:38:27 +0000 (15:38 +0000)]
migration_init: Fix lock initialisation/make it explicit
Peter reported a lock error on MacOS after my
a82d593b
patch.
migrate_get_current does one-time initialisation of
a bunch of variables.
migrate_init does reinitialisation even on a 2nd
migrate after a cancel.
The problem here was that I'd initialised the mutex
in migrate_get_current, and the memset in migrate_init
corrupted it.
Remove the memset and replace it by explicit initialisation
of fields that need initialising; this also turns out to be simpler
than the old code that had to preserve some fields.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes:
a82d593b
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Dr. David Alan Gilbert [Thu, 12 Nov 2015 11:34:44 +0000 (11:34 +0000)]
migrate-start-postcopy: Improve text
Improve the text in both the qapi-schema and hmp help to point out
you need to set the postcopy-ram capability prior to issuing
migrate-start-postcopy.
Also fix the text of the migrate_start_postcopy error that
deals with capabilities.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
John Snow [Thu, 12 Nov 2015 16:29:49 +0000 (11:29 -0500)]
configure: check for $cxx before use
I broke this when adding checks for clang++.
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1447345789-840-1-git-send-email-jsnow@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dr. David Alan Gilbert [Wed, 11 Nov 2015 14:02:28 +0000 (14:02 +0000)]
Postcopy: Fix TP!=HP zero case
Where the target page size is different from the host page
we special case it, but I messed up on the zero case check.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Dr. David Alan Gilbert [Wed, 11 Nov 2015 14:02:27 +0000 (14:02 +0000)]
Finish non-postcopiable iterative devices before package
Where we have iterable, but non-postcopiable devices (e.g. htab
or block migration), complete them before forming the 'package'
but with the CPUs stopped. This stops them filling up the package.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 10 Nov 2015 16:43:04 +0000 (17:43 +0100)]
migration: Make 32bit linux compile with RDMA
Rest of the file already use that trick. 64bit offsets make no sense in
32bit archs, but that is ram_addr_t for you.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Juan Quintela [Tue, 10 Nov 2015 16:42:05 +0000 (17:42 +0100)]
migration: print ram_addr_t as RAM_ADDR_FMT not %zx
Not all the wold is 64bits (yet).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Sergey Fedorov [Thu, 12 Nov 2015 15:10:43 +0000 (15:10 +0000)]
target-arm: Update PC before calling gen_helper_check_breakpoints()
PC should be updated in the CPU state before calling check_breakpoints()
helper. Otherwise, the helper would not see the correct PC in the CPU
state if it is not at the start of a TB.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id:
1447176222-16401-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 12 Nov 2015 15:15:30 +0000 (15:15 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost: fixes for 2.5
This fixes a performance regression with virtio 1,
and makes device stop/start more robust for vhost-user.
virtio devices on pcie bus now have pcie and pm
capability, as required by the PCI Express spec.
migration now works better with virtio 9p.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 12 Nov 2015 14:40:42 GMT using RSA key ID
D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
virtio-9p: add savem handlers
hw/virtio: Add PCIe capability to virtio devices
vhost: send SET_VRING_ENABLE at start/stop
vhost: rename RESET_DEVICE backto RESET_OWNER
vhost-user: modify SET_LOG_BASE to pass mmap size and offset
virtio-pci: unbreak queue_enable read
virtio-pci: introduce pio notification capability for modern device
virtio-pci: use zero length mmio eventfd for 1.0 notification cap when possible
KVM: add support for any length io eventfd
memory: don't try to adjust endianness for zero length eventfd
virtio-pci: fix 1.0 virtqueue migration
Conflicts:
include/hw/compat.h
[Fixed a trivial merge conflict in compat.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alberto Garcia [Wed, 28 Oct 2015 15:33:18 +0000 (17:33 +0200)]
block: Update copyright of the accounting code
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
80a2278e3ec2dafd5daab20a7cb2d6a9b83371e4.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:17 +0000 (17:33 +0200)]
scsi-disk: Account for failed operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
0ead7b0e59c22926e033ca12725e3a31985ec46b.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:16 +0000 (17:33 +0200)]
macio: Account for failed operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
ee6f4fde6a7c1071ca96d4ddd53e4934ff812fcd.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:15 +0000 (17:33 +0200)]
ide: Account for failed and invalid operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
bf4d6c9c563877e699b0bf42e7eaf8b096c4a35e.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:14 +0000 (17:33 +0200)]
atapi: Account for failed and invalid operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
59dee4e2921b0c79d41c49b67dfb93d32db9f7f9.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:13 +0000 (17:33 +0200)]
xen_disk: Account for failed and invalid operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
e0cbb96cb0e1f86c37c7ce332efdf02b57b9d365.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:12 +0000 (17:33 +0200)]
virtio-blk: Account for failed and invalid operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
4f623ce52c9d673d35a043fc2959526b41b685c6.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:11 +0000 (17:33 +0200)]
nvme: Account for failed and invalid operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
678dc67da229759d404b44f7cc2bf5ed8bf8ad14.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:10 +0000 (17:33 +0200)]
iotests: Add test for the block device statistics
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
0fb8501bbf3666b3d5d3f67fa899729c88f21baf.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:09 +0000 (17:33 +0200)]
block: Use QEMU_CLOCK_VIRTUAL for the accounting code in qtest mode
This patch switches to QEMU_CLOCK_VIRTUAL for the accounting code in
qtest mode, and makes the latency of the operation constant. This way we
can perform tests on the accounting code with reproducible results.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
35ed0501450fa572684e9b5e92c361ab6cce565b.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:08 +0000 (17:33 +0200)]
qemu-io: Account for failed, invalid and flush operations
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
78a7662a8636e55991737ece50003a2dc5a5f3e0.
1446044838.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:07 +0000 (17:33 +0200)]
block: New option to define the intervals for collecting I/O statistics
The BlockAcctStats structure contains a list of BlockAcctTimedStats.
Each one of these collects statistics about the minimum, maximum and
average latencies of all I/O operations in a certain interval of time.
This patch adds a new "stats-intervals" option that allows defining
these intervals.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
41cbcd334a61c6157f0f495cdfd21eff6c156f2a.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:06 +0000 (17:33 +0200)]
block: Add average I/O queue depth to BlockDeviceTimedStats
This patch adds two new fields to BlockDeviceTimedStats that track the
average number of pending read and write requests for a block device.
The values are calculated for the period of time defined for that
interval.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
fd31fef53e2714f2f30d59ed58ca2f67ec9ab926.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:05 +0000 (17:33 +0200)]
block: Compute minimum, maximum and average I/O latencies
This patch keeps track of the minimum, maximum and average latencies
of I/O operations during a certain interval of time.
The values are exposed in the BlockDeviceTimedStats structure.
An option to define the intervals to collect these statistics will be
added in a separate patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
c7382dc89622c64f918d09f32815827772628f8e.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:04 +0000 (17:33 +0200)]
block: Allow configuring whether to account failed and invalid ops
This patch adds two options, "stats-account-invalid" and
"stats-account-failed", that can be used to decide whether invalid and
failed I/O operations must be used when collecting statistics for
latency and last access time.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
ebc7e5966511a342cad428a392c5f5ad56b15213.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:03 +0000 (17:33 +0200)]
block: Add statistics for failed and invalid I/O operations
This patch adds the block_acct_failed() and block_acct_invalid()
functions to allow keeping track of failed and invalid I/O operations.
The number of failed and invalid operations is exposed in
BlockDeviceStats.
We don't keep track of the time spent on invalid operations because
they are cancelled immediately when they are started.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
a7256ccb883a86356b1c6c46b5a29ed5448546a5.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:02 +0000 (17:33 +0200)]
block: Add idle_time_ns to BlockDeviceStats
This patch adds the new field 'idle_time_ns' to the BlockDeviceStats
structure, indicating the time that has passed since the previous I/O
operation.
It also adds the block_acct_idle_time_ns() call, to ensure that all
references to the clock type used for accounting are in the same
place. This will later allow us to use a different clock for iotests.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
7d8cfcf931453e1a2443e6626e8c1edc347c7c8a.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:01 +0000 (17:33 +0200)]
util: Infrastructure for computing recent averages
This module computes the average of a set of values within a time
window, keeping also track of the minimum and maximum values.
In order to produce more accurate results it works internally by
creating two time windows of the same period, offsetted by half of
that period. Values are accounted on both windows and the data is
always returned from the oldest one.
[Add missing util/replay.o to test-timed-average dependencies to fix the
build.
--Stefan]
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id:
201b09c21bbc9c329779d2b2365ee2b9c80dceeb.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:33:00 +0000 (17:33 +0200)]
block: define 'clock_type' for the accounting code
Its value is still QEMU_CLOCK_REALTIME, but having it in a variable will
allow us to change its value easily in the future when running in qtest
mode.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
547485eb841cf9e3b2770c96539ae9ae5996e214.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:32:59 +0000 (17:32 +0200)]
ide: Account for write operations correctly
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
2e71323c0875c2b66a8ae22229545e0c013af8d4.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alberto Garcia [Wed, 28 Oct 2015 15:32:58 +0000 (17:32 +0200)]
xen_disk: Account for flush operations
Currently both BLKIF_OP_WRITE and BLKIF_OP_FLUSH_DISKCACHE are being
accounted as write operations.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id:
7a2a14e3ac62027aa6267a6c02abc70717be9c0a.
1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Thu, 5 Nov 2015 23:13:20 +0000 (18:13 -0500)]
tests: add BlockJobTxn unit test
The BlockJobTxn unit test verifies that both single jobs and pairs of
jobs behave as a transaction group. Either all jobs complete
successfully or the group is cancelled.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Thu, 5 Nov 2015 23:13:19 +0000 (18:13 -0500)]
iotests: 124 - transactional failure test
Use a transaction to request an incremental backup across two drives.
Coerce one of the jobs to fail, and then re-run the transaction.
Verify that no bitmap data was lost due to the partial transaction
failure.
To support the 'err-cancel' QMP argument name it's necessary for
transaction_action() to convert underscores in Python argument names
to hyphens for QMP argument names.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id:
1446765200-3054-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Thu, 5 Nov 2015 23:13:18 +0000 (18:13 -0500)]
block: add transactional properties
Add both transactional properties to the QMP transactional interface,
and add the BlockJobTxn that we create as a result of the err-cancel
property to the BlkActionState structure.
[split up from a patch originally by Stefan and Fam. --js]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Thu, 5 Nov 2015 23:13:17 +0000 (18:13 -0500)]
block: Add BlockJobTxn support to backup_run
Allow a BlockJobTxn to be passed into backup_run, which
will allow the job to join a transactional group if present.
Propagate this new parameter outward into new QMP helper
functions in blockdev.c to allow transaction commands to
pass forward their BlockJobTxn object in a forthcoming patch.
[split up from a patch originally by Stefan and Fam. --js]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Thu, 5 Nov 2015 23:13:16 +0000 (18:13 -0500)]
block/backup: Rely on commit/abort for cleanup
Switch over to the new .commit/.abort handlers for
cleaning up incremental bitmaps.
[split up from a patch originally by Stefan and Fam. --js]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Thu, 5 Nov 2015 23:13:15 +0000 (18:13 -0500)]
block: Add block job transactions
Sometimes block jobs must execute as a transaction group. Finishing
jobs wait until all other jobs are ready to complete successfully.
Failure or cancellation of one job cancels the other jobs in the group.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-10-git-send-email-jsnow@redhat.com
[Rewrite the implementation which is now contained in block_job_completed.
--Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Thu, 5 Nov 2015 23:13:14 +0000 (18:13 -0500)]
blockjob: Simplify block_job_finish_sync
With job->completed and job->ret to replace BlockFinishData.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Thu, 5 Nov 2015 23:13:13 +0000 (18:13 -0500)]
blockjob: Add "completed" and "ret" in BlockJob
They are set when block_job_completed is called.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Thu, 5 Nov 2015 23:13:12 +0000 (18:13 -0500)]
blockjob: Add .commit and .abort block job actions
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Thu, 5 Nov 2015 23:13:11 +0000 (18:13 -0500)]
blockjob: Introduce reference count and fix reference to job->bs
Add reference count to block job, meanwhile move the ownership of the
reference to job->bs from the caller (which is released in two
completion callbacks) to the block job itself. It is necessary for
block_job_complete_sync to work, because block job shouldn't live longer
than its bs, as asserted in bdrv_delete.
Now block_job_complete_sync can be simplified.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Thu, 5 Nov 2015 23:13:10 +0000 (18:13 -0500)]
backup: Extract dirty bitmap handling as a separate function
This will be reused by the coming new transactional completion code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Thu, 5 Nov 2015 23:13:09 +0000 (18:13 -0500)]
block: rename BlkTransactionState and BdrvActionOps
These structures are misnomers, somewhat.
(1) BlockTransactionState is not state for a transaction,
but is rather state for a single transaction action.
Rename it "BlkActionState" to be more accurate.
(2) The BdrvActionOps describes operations for the BlkActionState,
above. This name might imply a 'BdrvAction' or a 'BdrvActionState',
which there isn't.
Rename this to 'BlkActionOps' to match 'BlkActionState'.
Lastly, update the surrounding in-line documentation and comments
to reflect the current nature of how Transactions operate.
This patch changes only comments and names, and should not affect
behavior in any way.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id:
1446765200-3054-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
John Snow [Thu, 5 Nov 2015 23:13:08 +0000 (18:13 -0500)]
iotests: add transactional incremental backup test
Test simple usage cases for using transactions to create
and synchronize incremental backups.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id:
1446765200-3054-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:54 +0000 (18:16 +0800)]
qed: Implement .bdrv_drain
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the
image header after a grace period once metadata update has finished. In
compliance to the bdrv_drain semantics we should make sure it remains
deleted once .bdrv_drain is called.
We cannot reuse qed_need_check_timer_cb because here it doesn't satisfy
the assertion. Do the "plug" and "flush" calls manually.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
1447064214-29930-10-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:53 +0000 (18:16 +0800)]
block: Introduce BlockDriver.bdrv_drain callback
Drivers can have internal request sources that generate IO, like the
need_check_timer in QED. Since we want quiesced periods that contain
nested event loops in block layer, we need to have a way to disable such
event sources.
Block drivers must implement the "bdrv_drain" callback if it has any
internal sources that can generate I/O activity, like a timer or a
worker thread (even in a library) that can schedule QEMUBH in an
asynchronous callback.
Update the comments of bdrv_drain and bdrv_drained_begin accordingly.
Like bdrv_requests_pending(), we should consider all the children of bs.
Before, the while loop just works, as bdrv_requests_pending() already
tracks its children; now we mustn't miss the callback, so recurse down
explicitly.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
1447064214-29930-9-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:52 +0000 (18:16 +0800)]
block: Drop BlockDriver.bdrv_ioctl
Now the callback is not used any more, drop the field along with all
implementations in block drivers, which are iscsi and raw.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
1447064214-29930-8-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:51 +0000 (18:16 +0800)]
block: Emulate bdrv_ioctl with bdrv_aio_ioctl and track both
Currently all drivers that support .bdrv_aio_ioctl also implement
.bdrv_ioctl redundantly. To track ioctl requests in block layer it is
easier if we unify the two paths, because we'll need to run it in a
coroutine, as required by tracked_request_begin. While we're at it, use
.bdrv_aio_ioctl plus aio_poll() to emulate bdrv_ioctl().
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id:
1447064214-29930-7-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:50 +0000 (18:16 +0800)]
block: Add ioctl parameter fields to BlockRequest
The two fields that will be used by ioctl handling code later are added
as union, because it's used exclusively by ioctl code which dosn't need
the four fields in the other struct of the union.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
1447064214-29930-6-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:49 +0000 (18:16 +0800)]
iscsi: Emulate commands in iscsi_aio_ioctl as iscsi_ioctl
iscsi_ioctl emulates SG_GET_VERSION_NUM and SG_GET_SCSI_ID. Now that
bdrv_ioctl() will be emulated with .bdrv_aio_ioctl, replicate the logic
into iscsi_aio_ioctl to make them consistent.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
1447064214-29930-5-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:48 +0000 (18:16 +0800)]
block: Track discard requests
Both bdrv_discard and bdrv_aio_discard will call into bdrv_co_discard,
so add tracked_request_begin/end calls around the loop.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
1447064214-29930-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:47 +0000 (18:16 +0800)]
block: Track flush requests
Both bdrv_flush and bdrv_aio_flush eventually call bdrv_co_flush, add
tracked_request_begin and tracked_request_end pair in that function so
that all flush requests are now tracked.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
1447064214-29930-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Mon, 9 Nov 2015 10:16:46 +0000 (18:16 +0800)]
block: Add more types for tracked request
We'll track more request types besides read and write, change the
boolean field to an enum.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id:
1447064214-29930-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Greg Kurz [Thu, 22 Oct 2015 17:38:42 +0000 (19:38 +0200)]
virtio-9p: add savem handlers
We don't support migration of mounted 9p shares. This is handled by a
migration blocker.
One would expect, however, to be able to migrate if the share is unmounted.
Unfortunately virtio-9p-device does not register savevm handlers at all !
Migration succeeds and leaves the guest with a dangling device...
This patch simply registers migration handlers for virtio-9p-device. Whether
migration is possible or not still depends on the migration blocker.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Marcel Apfelbaum [Tue, 10 Nov 2015 11:41:29 +0000 (13:41 +0200)]
hw/virtio: Add PCIe capability to virtio devices
The virtio devices are converted to PCI-Express
if they are plugged into a PCI-Express bus and
the 'modern' protocol is enabled.
Devices plugged directly into the Root Complex as
Integrated Endpoints remain PCI.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell [Thu, 12 Nov 2015 14:15:32 +0000 (14:15 +0000)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 12 Nov 2015 08:01:55 GMT using RSA key ID
398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: netmap: use error_setg() helpers in place of error_report()
net: netmap: Fix compilation issue
e1000: Introducing backward compatibility command line parameter
e1000: Implementing various counters
e1000: Fixing the packet address filtering procedure
e1000: Fixing the received/transmitted octets' counters
e1000: Fixing the received/transmitted packets' counters
e1000: Trivial implementation of various MAC registers
e1000: Introduced an array to control the access to the MAC registers
e1000: Add support for migrating the entire MAC registers' array
e1000: Cosmetic and alignment fixes
slirp: Fix type casts and format strings in debug code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Yuanhan Liu [Wed, 11 Nov 2015 13:24:41 +0000 (21:24 +0800)]
vhost: send SET_VRING_ENABLE at start/stop
Send SET_VRING_ENABLE at start/stop, to give the backend
an explicit sign of our state.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yuanhan Liu [Wed, 11 Nov 2015 13:24:37 +0000 (21:24 +0800)]
vhost: rename RESET_DEVICE backto RESET_OWNER
This patch basically reverts commit
d1f8b30e.
It turned out that it breaks stuff, so revert it:
http://lists.nongnu.org/archive/html/qemu-devel/2015-10/msg00949.html
CC: "Michael S. Tsirkin" <mst@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Victor Kaplansky [Wed, 11 Nov 2015 14:26:02 +0000 (16:26 +0200)]
vhost-user: modify SET_LOG_BASE to pass mmap size and offset
Unlike the kernel, vhost-user application accesses log table by
mmaping it to its user space. This change adds two new fields to
VhostUserMsg payload: mmap_size, and mmap_offset and make QEMU to
pass the to vhost-user application in VHOST_USER_SET_LOG_BASE
request.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 6 Nov 2015 08:02:49 +0000 (16:02 +0800)]
virtio-pci: unbreak queue_enable read
Guest always get zero when reading queue_enable. This violates
spec. Fixing this by setting the queue_enable to true during any guest
writing and setting it to zero during reset.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 6 Nov 2015 08:02:48 +0000 (16:02 +0800)]
virtio-pci: introduce pio notification capability for modern device
We used to use mmio for notification. This could be slow on some arch
(e.g on x86 without EPT). So this patch introduces pio bar and a pio
notification cap for modern device. This ability is enabled through
property "modern-pio-notify" for virtio pci devices and was disabled
by default. Management can enable when it thinks it was needed.
Benchmarks shows almost no obvious difference compared to legacy
device on machines without ept. Thanks Wenli Quan <wquan@redhat.com>
for the benchmarking.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 6 Nov 2015 08:02:47 +0000 (16:02 +0800)]
virtio-pci: use zero length mmio eventfd for 1.0 notification cap when possible
We use data match eventfd for 1.0 notification currently. This could
be slow since software decoding is needed for mmio exit. To speed this
up, we can switch to use zero length mmio eventfd for 1.0 notification
since we can examine the queue index directly from the writing
address. KVM kernel module can utilize this by registering it to fast
mmio bus which could be as fast as pio on ept capable machine when
fast mmio is supported by host kernel.
Lots of improvements were seen on a ept capable machine:
Guest RX:(TCP)
size/session/+throughput%/+cpu%/-+per cpu%/
64/1/+1.6807%/[-16.2421%]/[+21.3984%]/
64/2/+0.6091%/[-11.0187%]/[+13.0678%]/
64/4/+0.0553%/[-5.9768%]/[+6.4155%]/
64/8/+0.1206%/[-4.0057%]/[+4.2984%]/
256/1/-0.0031%/[-10.1166%]/[+11.2517%]/
256/2/-0.5058%/[-6.1656%]/+6.0317%]/
...
Guest TX:(TCP)
size/session/+throughput%/+cpu%/-+per cpu%/
64/1/[+18.9183%]/-0.2823%/[+19.2550%]/
64/2/[+13.5714%]/[+2.2675%]/[+11.0533%]/
64/4/[+13.1070%]/[+2.1817%]/[+10.6920%]/
64/8/[+13.0426%]/[+2.0887%]/[+10.7299%]/
256/1/[+36.2761%]/+6.3434%/[+28.1471%]/
...
1024/1/[+44.8873%]/+2.0811%/[+41.9335%]/
...
1024/4/+0.0228%/[-2.2044%]/[+2.2774%]/
...
16384/2/+0.0127%/[-5.0346%]/[+5.3148%]/
...
65535/1/[+0.0062%]/[-4.1183%]/[+4.3017%]/
65535/2/+0.0004%/[-4.2311%]/[+4.4185%]/
65535/4/+0.0107%/[-4.6106%]/[+4.8446%]/
65535/8/-0.0090%/[-5.5178%]/[+5.8306%]/
Latency:(TCP_RR)
size/session/+transaction rate%/+cpu%/-+per cpu%/
64/1/[+6.5248%]/[-9.2882%]/[+17.4322%]/
64/25/[+11.0854%]/[+0.8000%]/[+10.2038%]/
64/50/[+12.1076%]/[+2.4627%]/[+9.4131%]/
256/1/[+5.3677%]/[+10.5669%]/-4.7024%/
256/25/[+5.6402%]/-0.8962%/[+6.5955%]/
256/50/[+5.9685%]/[+1.7766%]/[+4.1188%]/
4096/1/+0.2508%/[-10.4941%]/[+12.0047%]/
4096/25/[+1.8533%]/-0.0273%/+1.8812%/
4096/50/[+1.2156%]/-1.4134%/+2.6667%/
Notes: data with '[]' is the one whose significance is greater than 95%.
Thanks Wenli Quan <wquan@redhat.com> for the benchmarking.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 6 Nov 2015 08:02:46 +0000 (16:02 +0800)]
KVM: add support for any length io eventfd
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Jason Wang [Fri, 6 Nov 2015 08:02:45 +0000 (16:02 +0800)]
memory: don't try to adjust endianness for zero length eventfd
There's no need to adjust endianness for zero length eventfd since the
data wrote was actually ignored by kernel. So skip the adjust in this
case to fix a possible crash when trying to use wildcard mmio eventfd
in ppc.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 6 Nov 2015 08:02:44 +0000 (16:02 +0800)]
virtio-pci: fix 1.0 virtqueue migration
We don't migrate the followings fields for virtio-pci:
uint32_t dfselect;
uint32_t gfselect;
uint32_t guest_features[2];
struct {
uint16_t num;
bool enabled;
uint32_t desc[2];
uint32_t avail[2];
uint32_t used[2];
} vqs[VIRTIO_QUEUE_MAX];
This will confuse driver if migrating during initialization. Solves
this issue by:
- introduce transport specific callbacks to load and store extra
virtqueue states.
- add a new subsection for virtio to migrate transport specific modern
device state.
- implement pci specific callbacks.
- add a new property for virtio-pci for whether or not to migrate
extra state.
- compat the migration for 2.4 and elder machine types
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Peter Maydell [Thu, 12 Nov 2015 13:41:44 +0000 (13:41 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-next-
20151112' into staging
ppc patch queue -2015-11-12
Highlights:
- A number of fixes for MacOS 9 compatibility based on the old MOL
(Mac-On-Linux) code and a GSoC project.
- Cleaner and more general way of handling register access from the
monitor
# gpg: Signature made Thu 12 Nov 2015 04:33:26 GMT using RSA key ID
20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-next-
20151112:
monitor/target-ppc: Define target_get_monitor_def
cuda.c: add delay to setting of SR_INT bit
cuda.c: fix T2 timer and enable its interrupt
cuda.c: rename get_counter() state variable from s to ti for consistency
cuda.c: refactor get_tb() so that the time can be passed in
cuda.c: add defines for CUDA registers
cuda.c: fix CUDA SR interrupt clearing
cuda.c: implement dummy IIC access commands
cuda.c: implement simple CUDA_GET_6805_ADDR command
cuda.c: fix CUDA_PACKET response packet format
cuda.c: fix CUDA ADB error packet format
PPC: mac99: Always add USB controller
PPC: Fix lswx bounds checks
PPC: Allow Rc bit to be set on mtspr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 12 Nov 2015 13:11:06 +0000 (13:11 +0000)]
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-11-11-tag' into staging
qemu-ga patch queue
* fix for unintended overwriting of data on w32 using
guest-file-open with append mode
# gpg: Signature made Wed 11 Nov 2015 22:14:52 GMT using RSA key ID
F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
* remotes/mdroth/tags/qga-pull-2015-11-11-tag:
qga: fix append file open modes for win32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marc-André Lureau [Thu, 12 Nov 2015 11:10:18 +0000 (12:10 +0100)]
tests: classify some ivshmem tests as slow
Some tests may take long to run, move them under g_test_slow()
condition.
The 5s timeout for the "server" test will have to be adjusted to the worst
known time (for the records, it takes ~0.2s on my host). The "pair"
test takes ~1.7, a quickest version could be implemented.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id:
1447326618-11686-1-git-send-email-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 12 Nov 2015 10:09:14 +0000 (10:09 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-11-11' into staging
error: More error_setg() usage
# gpg: Signature made Wed 11 Nov 2015 17:57:15 GMT using RSA key ID
EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-11-11:
error: More error_setg() usage
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Vincenzo Maffione [Tue, 10 Nov 2015 09:47:22 +0000 (10:47 +0100)]
net: netmap: use error_setg() helpers in place of error_report()
This update was required to align error reporting of netmap backend
initialization to the modifications introduced by commit
a30ecde.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Vincenzo Maffione [Tue, 10 Nov 2015 09:47:21 +0000 (10:47 +0100)]
net: netmap: Fix compilation issue
Reorganization of struct NetClientOptions (commit
e4ba22b) caused a
compilation failure of the netmap backend. This patch fixes the issue
by properly accessing the union field.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:47 +0000 (15:52 +0200)]
e1000: Introducing backward compatibility command line parameter
This follows the previous patches, where support for migrating the
entire MAC registers' array, and some new MAC registers were introduced.
This patch introduces the e1000-specific boolean parameter
"extra_mac_registers", which is on by default. Setting it to off will
enable migration to older versions of QEMU, but will disable the read
and write access to the new registers, that were introduced since adding
the ability to migrate the entire MAC array.
Example for usage to enable backward compatibility and to disable the
new MAC registers:
qemu-system-x86_64 -device e1000,extra_mac_registers=off,... ...
As mentioned above, the default value is "on".
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:46 +0000 (15:52 +0200)]
e1000: Implementing various counters
This implements the following Statistic registers (various counters)
according to Intel's specs:
TSCTC GOTCL GOTCH GORCL GORCH MPRC BPRC RUC ROC
BPTC MPTC PTC... PRC...
PLEASE NOTE: these registers will not be active, nor will migrate, until
a compatibility flag will be set (in the next patch in this series).
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:45 +0000 (15:52 +0200)]
e1000: Fixing the packet address filtering procedure
Previously, if promiscuous unicast was enabled, a packet was received
straight away, even if it was a multicast or a broadcast packet. This
patch fixes that behavior, while making the filtering procedure a bit
more human-readable.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:44 +0000 (15:52 +0200)]
e1000: Fixing the received/transmitted octets' counters
Previously, these 64-bit registers did not stick at their maximal
values when (and if) they reached them, as they should do, according to
the specs.
This patch introduces a function that takes care of such registers,
avoiding code duplication, making the relevant parts more compatible
with the QEMU coding style, while ensuring that in the unlikely case
of reaching the maximal value, the counter will stick there, as it
supposed to.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:43 +0000 (15:52 +0200)]
e1000: Fixing the received/transmitted packets' counters
According to Intel's specs, these counters (as the other Statistic
registers) stick at 0xffffffff when this maximal value is reached.
Previously, they would reset after the max. value.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:42 +0000 (15:52 +0200)]
e1000: Trivial implementation of various MAC registers
These registers appear in Intel's specs, but were not implemented.
These registers are now implemented trivially, i.e. they are initiated
with zero values, and if they are RW, they can be written or read by the
driver, or read only if they are R (essentially retaining their zero
values). For these registers no other procedures are performed.
For the trivially implemented Diagnostic registers, a debug warning is
produced on read/write attempts.
PLEASE NOTE: these registers will not be active, nor will migrate, until
a compatibility flag will be set (in a later patch in this series).
The registers implemented here are:
Transmit:
RW: AIT
Management:
RW: WUC WUS IPAV IP6AT* IP4AT* FFLT* WUPM* FFMT* FFVT*
Diagnostic:
RW: RDFH RDFT RDFHS RDFTS RDFPC PBM* TDFH TDFT TDFHS
TDFTS TDFPC
Statistic:
RW: FCRUC
R: RNBC TSCTFC MGTPRC MGTPDC MGTPTC RFC RJC SCC ECOL
LATECOL MCC COLC DC TNCRS SEC CEXTERR RLEC XONRXC
XONTXC XOFFRXC XOFFTXC
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:41 +0000 (15:52 +0200)]
e1000: Introduced an array to control the access to the MAC registers
The array of uint8_t's which is introduced here, contains access metadata
about the MAC registers: if a register is accessible, but partly implemented,
or if a register requires a certain compatibility flag in order to be
accessed. Currently, 6 hypothetical flags are supported (3 exist for e1000
so far) but in the future, if more than 6 flags will be needed, the datatype
of this array can simply be swapped for a larger one.
This patch is intended to solve the following current problems:
1) In a scenario of migration between different versions of QEMU, which
differ by the MAC registers implemented in them, some registers need not to
be active if a compatibility flag is set, in order to preserve the machine's
state perfectly for the older version. Checking this for each register
individually, would create a lot of clutter in the code.
2) Some registers are (or may be) only partly implemented (e.g.
placeholders that allow reading and writing, but lack other functions).
In such cases it is better to print a debug warning on read/write attempts.
As above, dealing with this functionality on a per-register level, would
require longer and more messy code.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:40 +0000 (15:52 +0200)]
e1000: Add support for migrating the entire MAC registers' array
This patch makes the migration of the entire array of MAC registers
possible during live migration. The entire array is just 128 KB long, so
practically no penalty should be felt when transmitting it, additionally
to the previously transmitted individual registers. The advantage here is
eliminating the need to introduce new vmstate subsections in the future,
when additional MAC registers will be implemented.
Backward compatibility is preserved by introducing a e1000-specific
boolean parameter (in a later patch), which will be on by default.
Setting it to off would enable migration to older versions of QEMU.
Additionally, this parameter will be used to control the access to the
extra MAC registers in the future.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Leonid Bloch [Wed, 11 Nov 2015 13:52:39 +0000 (15:52 +0200)]
e1000: Cosmetic and alignment fixes
This fixes some alignment and cosmetic issues. The changes are made
in order that the following patches in this series will look like
integral parts of the code surrounding them, while conforming to the
coding style. Although some changes in unrelated areas are also made.
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Stefan Weil [Sat, 29 Aug 2015 07:12:35 +0000 (09:12 +0200)]
slirp: Fix type casts and format strings in debug code
Casting pointers to long won't work on 64 bit Windows.
It is not needed with the right format strings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Alexey Kardashevskiy [Thu, 12 Nov 2015 03:44:23 +0000 (14:44 +1100)]
monitor/target-ppc: Define target_get_monitor_def
At the moment get_monitor_def() returns only registers from statically
defined monitor_defs array. However there is a lot of BOOK3S SPRs
which are not in the list and cannot be printed from the monitor.
This adds a new target platform hook - target_get_monitor_def().
The hook is called if a register was not found in the static
array returned by the target_monitor_defs() hook.
The hook is only defined for POWERPC, it returns registered
SPRs and fails on unregistered ones providing the user with information
on what is actually supported on the running CPU. The register value is
saved as uint64_t as it is the biggest supported register size;
target_ulong cannot be used because of the stub - it is in a "common"
code and cannot include "cpu.h", etc; this is also why the hook prototype
is redefined in the stub instead of being included from some header.
This replaces static descriptors for GPRs, FPRs, SRs with a helper which
looks for a value in a corresponding array in the CPUPPCState.
The immediate effect is that all 32 SRs can be printed now (instead of 16);
later this can be reused for VSX or TM registers.
This replaces callbacks for MSR and XER with static descriptors in
monitor_defs as they are stored in CPUPPCState.
While we are here, this adds "cr" as a synonym of "ccr".
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:51 +0000 (22:49 +0000)]
cuda.c: add delay to setting of SR_INT bit
MacOS 9 is racy when it comes to accessing the shift register. Fix this by
introducing a small delay between data accesses and raising the SR_INT
interrupt bit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:50 +0000 (22:49 +0000)]
cuda.c: fix T2 timer and enable its interrupt
Fix the counter loading logic and enable the T2 interrupt when the timer
expires. Otherwise MacOS 9 hangs on boot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:49 +0000 (22:49 +0000)]
cuda.c: rename get_counter() state variable from s to ti for consistency
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:48 +0000 (22:49 +0000)]
cuda.c: refactor get_tb() so that the time can be passed in
This is in preparation for sharing the code between timers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:47 +0000 (22:49 +0000)]
cuda.c: add defines for CUDA registers
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:46 +0000 (22:49 +0000)]
cuda.c: fix CUDA SR interrupt clearing
Make sure that we also clear the data and clock interrupts at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:45 +0000 (22:49 +0000)]
cuda.c: implement dummy IIC access commands
These are used by MacOS 9 on boot. Here we return an error except for 4-byte
commands which write to the IIC bus in a similar manner to MOL.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:44 +0000 (22:49 +0000)]
cuda.c: implement simple CUDA_GET_6805_ADDR command
This simply returns an empty response with no error status as implemented by
MOL to allow MacOS 9 boot to proceed further.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:43 +0000 (22:49 +0000)]
cuda.c: fix CUDA_PACKET response packet format
According to comments in MOL, the response to a CUDA_PACKET should be one of
the following:
Reply: (CUDA_PACKET, status, cmd)
Error: (ERROR_PACKET, status, CUDA_PACKET, cmd)
Update cuda_receive_packet() accordingly to reflect this in order to make
MacOS 9 happy.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Mark Cave-Ayland [Wed, 11 Nov 2015 22:49:42 +0000 (22:49 +0000)]
cuda.c: fix CUDA ADB error packet format
According to MOL, ADB error packets should be of the form (type, status, cmd)
rather than just (type, status). This fixes ADB device detection under MacOS 9.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>