OSDN Git Service
Takashi Iwai [Tue, 18 Feb 2020 11:17:36 +0000 (12:17 +0100)]
ASoC: intel: skl: Fix possible buffer overflow in debug outputs
The debugfs output of intel skl driver writes strings with multiple
snprintf() calls with the fixed size. This was supposed to avoid the
buffer overflow but actually it still would, because snprintf()
returns the expected size to be output, not the actual output size.
Fix it by replacing snprintf() calls with scnprintf().
Fixes:
d14700a01f91 ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Tue, 18 Feb 2020 11:17:35 +0000 (12:17 +0100)]
ASoC: intel: skl: Fix pin debug prints
skl_print_pins() loops over all given pins but it overwrites the text
at the very same position while increasing the returned length.
Fix this to show the all pin contents properly.
Fixes:
d14700a01f91 ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Dan Murphy [Tue, 18 Feb 2020 18:52:52 +0000 (12:52 -0600)]
ASoC: tas2562: Return invalid for when bitwidth is invalid
If the bitwidth passed in to the set_bitwidth function is not supported
then return an error.
Fixes:
29b74236bd57 ("ASoC: tas2562: Introduce the TAS2562 amplifier")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200218185252.26290-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Samuel Holland [Mon, 17 Feb 2020 06:42:22 +0000 (00:42 -0600)]
ASoC: sun8i-codec: Fix setting DAI data format
Use the correct mask for this two-bit field. This fixes setting the DAI
data format to RIGHT_J or DSP_A.
Fixes:
36c684936fae ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200217064250.15516-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Ravulapati Vishnu vardhan rao [Mon, 17 Feb 2020 10:39:19 +0000 (16:09 +0530)]
ASoC: amd: ACP needs to be powered off in BIOS.
Removed this logic because It is BIOS which needs to
power off the ACP power domian through ACP_PGFSM_CTRL
register when you De-initialize ACP Engine.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1581935964-15059-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Mon, 17 Feb 2020 03:16:52 +0000 (11:16 +0800)]
ASoC: hdmi-codec: set plugged_cb to NULL when component removing
Sets plugged_cb to NULL when component removing to notify its consumers
: no further plugged status report is required.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200217105513.1.Icc323daaf71ad02f191fd8d91136b01b61eca5e3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Fri, 14 Feb 2020 10:57:43 +0000 (18:57 +0800)]
ASoC: dapm: remove snd_soc_dapm_put_enum_double_locked
Reverts commit
839284e79482 ("ASoC: dapm: add
snd_soc_dapm_put_enum_double_locked").
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200214105744.82258-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Fri, 14 Feb 2020 10:57:42 +0000 (18:57 +0800)]
ASoC: max98090: revert invalid fix for handling SHDN
Reverts commit
62d5ae4cafb7 ("ASoC: max98090: save and restore
SHDN when changing sensitive registers").
A critical side-effect was observed: when keep playing something,
the recorded sound has chance to break (clipping).
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200214105744.82258-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Samuel Holland [Thu, 13 Feb 2020 06:11:44 +0000 (00:11 -0600)]
ASoC: codec2codec: avoid invalid/double-free of pcm runtime
The PCM runtime was freed during PMU in the case that the event hook
encountered an error. However, it is also unconditionally freed during
PMD. Avoid a double-free by dropping the call to kfree in the PMU hook.
Fixes:
a72706ed8208 ("ASoC: codec2codec: remove ephemeral variables")
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200213061147.29386-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Ravulapati Vishnu vardhan rao [Tue, 11 Feb 2020 13:12:28 +0000 (18:42 +0530)]
ASoC: amd: Buffer Size instead of MAX Buffer
Because of MAX BUFFER size in register,when user/app give small
buffer size produces noise of old data in buffer.
This patch rectifies this noise when using different
buffer sizes less than MAX BUFFER.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1581426768-8937-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Thu, 6 Feb 2020 20:02:23 +0000 (22:02 +0200)]
ASoC: SOF: Intel: hda: move i915 init earlier
To be compliant with i915 display driver requirements, i915 power-up
must be done before any HDA communication takes place, including
parsing the bus capabilities. Otherwise the initial codec probe
may fail.
Move i915 initialization earlier in the SOF HDA sequence. This
sequence is now aligned with the snd-hda-intel driver where the
display_power() call is before snd_hdac_bus_parse_capabilities()
and rest of the capability parsing.
Also remove unnecessary ifdef around hda_codec_i915_init(). There's
a dummy implementation provided if CONFIG_SND_SOC_SOF_HDA is not
enabled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Thu, 6 Feb 2020 20:02:22 +0000 (22:02 +0200)]
ASoC: SOF: Intel: hda: fix ordering bug in resume flow
When HDA controller is resumed from suspend, i915 HDMI/DP
codec requires that following order of actions is kept:
- i915 display power up and configuration of link params
- hda link reset and setup
Current SOF HDA code delegates display codec power control
to the codec driver. This works most of the time, but in
runtime PM sequences, the above constraint may be violated.
On platforms where BIOS values for HDA link parameters do
not match hardware reset defaults, this may lead to errors
in HDA verb transactions after resume.
Fix the issue by explicitly powering the display codec
in the HDA controller resume/suspend calls, thus ensuring
correct ordering. Special handling is needed for the D0i3
flow, where display power must be turned off even though
DSP is left powered.
Now that we have more invocations of the display power helper
functions, the conditional checks surrounding each call have
been moved inside hda_codec_i915_display_power(). The two
special cases of display powering at initial probe are handled
separately. The intent is to avoid powering the display whenever
no display codecs are used.
Note that early powering of display was removed in
commit
687ae9e287b3 ("ASoC: intel: skl: Fix display power regression").
This change was also copied to the SOF driver. No failures
have resulted as hardware default values for link parameters
have worked out of the box. However with recent i915 driver
changes like done in commit
87c1694533c9 ("drm/i915: save
AUD_FREQ_CNTRL state at audio domain suspend"), this does not
hold anymore and errors are hit.
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Thu, 6 Feb 2020 20:02:21 +0000 (22:02 +0200)]
ALSA: hda: do not override bus codec_mask in link_get()
snd_hdac_ext_bus_link_get() does not work correctly in case
there are multiple codecs on the bus. It unconditionally
resets the bus->codec_mask value. As per documentation in
hdaudio.h and existing use in client code, this field should
be used to store bit flag of detected codecs on the bus.
By overwriting value of the codec_mask, information on all
detected codecs is lost. No current user of hdac is impacted,
but use of bus->codec_mask is planned in future patches
for SOF.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200206200223.7715-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Arnd Bergmann [Thu, 30 Jan 2020 13:05:45 +0000 (15:05 +0200)]
ASoC: atmel: fix atmel_ssc_set_audio link failure
The ssc audio driver can call into both pdc and dma backends. With the
latest rework, the logic to do this in a safe way avoiding link errors
was removed, bringing back link errors that were fixed long ago in commit
061981ff8cc8 ("ASoC: atmel: properly select dma driver state") such as
sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
atmel_ssc_dai.c:(.text+0xac): undefined reference to `atmel_pcm_pdc_platform_register'
Fix it this time using Makefile hacks and a comment to prevent this
from accidentally getting removed again rather than Kconfig hacks.
Fixes:
18291410557f ("ASoC: atmel: enable SOC_SSC_PDC and SOC_SSC_DMA in Kconfig")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200130130545.31148-1-codrin.ciubotariu@microchip.com
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mark Brown <broonie@kernel.org>
Oleksandr Suvorov [Wed, 5 Feb 2020 16:04:36 +0000 (18:04 +0200)]
ASoC: fsl_sai: Fix exiting path on probing failure
If the imx-sdma driver is built as a module, the fsl-sai device doesn't
disable on probing failure, which causes the warning in the next probing:
==================================================================
fsl-sai
308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai
308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai
308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai
308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai
308a0000.sai: Unbalanced pm_runtime_enable!
fsl-sai
308a0000.sai: Unbalanced pm_runtime_enable!
==================================================================
Disabling the device properly fixes the issue.
Fixes:
812ad463e089 ("ASoC: fsl_sai: Add support for runtime pm")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20200205160436.3813642-1-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Geert Uytterhoeven [Tue, 4 Feb 2020 13:18:57 +0000 (14:18 +0100)]
ASoC: wcd934x: Add missing COMMON_CLK dependency to SND_SOC_ALL_CODECS
Just adding a dependency on COMMON_CLK to SND_SOC_WCD934X is not
sufficient, as enabling SND_SOC_ALL_CODECS will still select it,
breaking the build later:
WARNING: unmet direct dependencies detected for SND_SOC_WCD934X
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n] && MFD_WCD934X [=m]
Selected by [m]:
- SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] && MFD_WCD934X [=m]
...
ERROR: "of_clk_add_provider" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
ERROR: "of_clk_src_simple_get" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
ERROR: "clk_hw_register" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
ERROR: "__clk_get_name" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined!
Fix this by adding the missing dependency to SND_SOC_ALL_CODECS
Fixes:
42b716359beca106 ("ASoC: wcd934x: Add missing COMMON_CLK dependency")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200204131857.7634-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Srinivas Kandagatla [Tue, 4 Feb 2020 11:12:41 +0000 (11:12 +0000)]
ASoC: wcd934x: Add missing COMMON_CLK dependency
Looks like some platforms are not yet using COMMON CLK.
PowerPC allyesconfig failed with below error in next
ld: sound/soc/codecs/wcd934x.o:(.toc+0x0):
undefined reference to `of_clk_src_simple_get'
ld: sound/soc/codecs/wcd934x.o: in function `.wcd934x_codec_probe':
wcd934x.c:(.text.wcd934x_codec_probe+0x3d4):
undefined reference to `.__clk_get_name'
ld: wcd934x.c:(.text.wcd934x_codec_probe+0x438):
undefined reference to `.clk_hw_register'
ld: wcd934x.c:(.text.wcd934x_codec_probe+0x474):
undefined reference to `.of_clk_add_provider'
Add the missing COMMON_CLK dependency to fix this errors.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200204111241.6927-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Oder Chiou [Mon, 3 Feb 2020 02:28:21 +0000 (02:28 +0000)]
MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECs
Remove the maintainer "Bard Liao" since he had quitted from Realtek.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/3ae27357f98a406a958304386a1457bc@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jon Hunter [Fri, 31 Jan 2020 09:19:01 +0000 (09:19 +0000)]
ASoC: tegra: Revert 24 and 32 bit support
Commit
f3ee99087c8ca0ecfdd549ef5a94f557c42d5428 ("ASoC: tegra: Allow
24bit and 32bit samples") added 24-bit and 32-bit support for to the
Tegra30 I2S driver. However, there are two additional commits that are
also needed to get 24-bit and 32-bit support to work correctly. These
commits are not yet applied because there are still some review comments
that need to be addressed. With only this change applied, 24-bit and
32-bit support is advertised by the I2S driver, but it does not work and
the audio is distorted. Therefore, revert this patch for now until the
other changes are also ready.
Furthermore, a clock issue with 24-bit support has been identified with
this change and so if we revert this now, we can also fix that in the
updated version.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200131091901.13014-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Yong Zhi [Fri, 31 Jan 2020 20:40:32 +0000 (14:40 -0600)]
ASoC: SOF: Intel: add PCI ID for JasperLake
Mirror ID added for legacy HDaudio.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200131204032.10213-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 27 Jan 2020 19:28:31 +0000 (20:28 +0100)]
ASoC: rt715: Add __maybe_unused to PM callbacks
Fix the compile warnings by adding __maybe_unused to PM callbacks:
sound/soc/codecs/rt715-sdw.c:566:12: warning: ‘rt715_dev_resume’ defined but not used [-Wunused-function]
sound/soc/codecs/rt715-sdw.c:552:12: warning: ‘rt715_dev_suspend’ defined but not used [-Wunused-function]
Fixes:
d1ede0641b05 ("ASoC: rt715: add RT715 codec driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200127192831.14057-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 27 Jan 2020 19:28:30 +0000 (20:28 +0100)]
ASoC: rt711: Add __maybe_unused to PM callbacks
Fix the compile warnings by adding __maybe_unused to PM callbacks:
sound/soc/codecs/rt711-sdw.c:504:12: warning: ‘rt711_dev_resume’ defined but not used [-Wunused-function]
sound/soc/codecs/rt711-sdw.c:490:12: warning: ‘rt711_dev_suspend’ defined but not used [-Wunused-function]
Fixes:
320b8b0d13b8 ("ASoC: rt711: add rt711 codec driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200127192831.14057-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 27 Jan 2020 19:28:29 +0000 (20:28 +0100)]
ASoC: rt700: Add __maybe_unused to PM callbacks
Fix the compile warnings by adding __maybe_unused to PM callbacks:
sound/soc/codecs/rt700-sdw.c:503:12: warning: ‘rt700_dev_resume’ defined but not used [-Wunused-function]
sound/soc/codecs/rt700-sdw.c:489:12: warning: ‘rt700_dev_suspend’ defined but not used [-Wunused-function]
Fixes:
7d2a5f9ae41e ("ASoC: rt700: add rt700 codec driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200127192831.14057-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 27 Jan 2020 19:28:28 +0000 (20:28 +0100)]
ASoC: rt1308-sdw: Add __maybe_unused to PM callbacks
Fix the compile warnings by adding __maybe_unused to PM callbacks:
sound/soc/codecs/rt1308-sdw.c:690:12: warning: ‘rt1308_dev_resume’ defined but not used [-Wunused-function]
sound/soc/codecs/rt1308-sdw.c:676:12: warning: ‘rt1308_dev_suspend’ defined but not used [-Wunused-function]
Fixes:
a87a6653a28c ("ASoC: rt1308-sdw: add rt1308 SdW amplifier driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200127192831.14057-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Akshu Agrawal [Tue, 28 Jan 2020 10:30:22 +0000 (16:00 +0530)]
ASoC: amd: Fix simultaneous playback and capture
Stopping of one stream is killing the other stream when they
are running simultaneously. This is because, IER register is
cleared which disables I2S and overrides any other block enables.
Clearing IER register only when all streams on a channel are disabled,
fixes the issue.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200128103029.128841-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Guennadi Liakhovetski [Fri, 24 Jan 2020 21:36:25 +0000 (15:36 -0600)]
ASoC: Intel: consistent HDMI codec probing code
Multiple Intel ASoC machine drivers repeat the same pattern in their
.late_probe() methods: they first check whether the common HDMI codec
driver is used, if not, they proceed by linking the legacy HDMI
driver to each HDMI port. While doing that they use some
inconsistent code:
1. after the loop they check, whether the list contained at least one
element and if not, they return an error. However, the earlier
code to use the common HDMI driver uses the first element of the
same list without checking. To fix this we move the check to the
top of the function.
2. some of those .late_probe() implementations execute code, only
needed for the common HDMI driver, before checking, whether the
driver is used. Move the code to after the check.
3. Some of those functions also perform a redundant initialisation of
the "err" variable.
This patch fixes those issues.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Bard Liao [Fri, 24 Jan 2020 21:36:24 +0000 (15:36 -0600)]
ASoC: intel: soc-acpi-intel-icl-match: fix rt715 ADR
Fix the part id of rt715 (typo with zero in the wrong place)
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pan Xiuli [Fri, 24 Jan 2020 21:36:23 +0000 (15:36 -0600)]
ASoC: SOF: pci: add missing default_fw_name of JasperLake
jsl_desc missed default_fw_name, this will fail the probe in
nocodec or generice HDA mode due the firmware path is intel/sof/(null)
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Fri, 24 Jan 2020 21:36:22 +0000 (15:36 -0600)]
ASoC: SOF: trace: fix unconditional free in trace release
Check if DMA pages were successfully allocated in initialization
before calling free. For many types of memory (like sgbufs)
the extra free is harmless, but not all backends track allocation
state, so add an explicit check.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Fri, 24 Jan 2020 21:36:21 +0000 (15:36 -0600)]
ASoC: SOF: core: release resources on errors in probe_continue
The initial intent of releasing resources in the .remove does not work
well with HDaudio codecs. If the probe_continue() fails in a work
queue, e.g. due to missing firmware or authentication issues, we don't
release any resources, and as a result the kernel oopses during
suspend operations.
The suggested fix is to release all resources during errors in
probe_continue(), and use fw_state to track resource allocation
state, so that .remove does not attempt to release the same
hardware resources twice. PM operations are also modified so that
no action is done if DSP resources have been freed due to
an error at probe.
Reported-by: Takashi Iwai <tiwai@suse.de>
Co-developed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=
1161246
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200124213625.30186-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Pierre-Louis Bossart [Fri, 24 Jan 2020 21:36:20 +0000 (15:36 -0600)]
ASoC: SOF: core: free trace on errors
free_trace() is not called on probe errors, fix
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Guennadi Liakhovetski [Fri, 24 Jan 2020 21:36:19 +0000 (15:36 -0600)]
ASoC: SOF: fix an Oops, caused by invalid topology
It is possible to create invalid topology that will cause a kernel
Oops when trying to allocate buffers for a NULL substream.
Specifically such an Oops was caused by a topology, where a DAI on a
capture pipeline was referencing the PCM ID from a playback pipeline.
Fix the Oops by explicitly checking for NULL.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200124213625.30186-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Ravulapati Vishnu vardhan rao [Mon, 27 Jan 2020 11:26:03 +0000 (16:56 +0530)]
ASoC: amd: Fix for Subsequent Playback issue.
If we play audio back to back, which kills one playback
and immediately start another, we can hear clicks.
This patch fixes the issue.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1580124397-19842-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Mon, 20 Jan 2020 16:01:16 +0000 (18:01 +0200)]
ASoC: SOF: Intel: do not disable i915 power during probe
Change HDA probe behaviour slightly so that i915 power is not
turned off if i915 audio codecs are found in the initial probe done
by SOF Intel driver, and power is kept on until HDA codec driver
probe runs.
This will reduce number of mode sets on platforms with low
minimum CDCLK (like GLK) and brings the SOF probe sequence closer
to legacy HDA driver in terms of i915 audio codec power management.
BugLink: https://github.com/thesofproject/linux/issues/1642
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200120160117.29130-3-kai.vehmanen@linux.intel.com
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kai Vehmanen [Mon, 20 Jan 2020 16:01:15 +0000 (18:01 +0200)]
ASoC: SOF: Intel: refactor i915_get/put functions
The current interface to control i915 display power is misleading.
The hda_codec_i915_get() and hda_codec_i915_put() names suggest
a refcounting based interface. This is confusing as no refcounting
is done and the underlying HDAC library interface does not support
refcounts eithers.
Clarify the code by replacing the functions with a single
hda_codec_i915_display_power() that is aligned with
snd_hdac_display_power().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200120160117.29130-2-kai.vehmanen@linux.intel.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Nathan Chancellor [Fri, 24 Jan 2020 15:57:50 +0000 (08:57 -0700)]
ASoC: rt1015: Remove unnecessary const
Clang warns:
../sound/soc/codecs/rt1015.c:392:14: warning: duplicate 'const'
declaration specifier [-Wduplicate-decl-specifier]
static const SOC_ENUM_SINGLE_DECL(rt1015_boost_mode_enum, 0, 0,
^
../include/sound/soc.h:355:2: note: expanded from macro
'SOC_ENUM_SINGLE_DECL'
SOC_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xtexts)
^
../include/sound/soc.h:352:2: note: expanded from macro
'SOC_ENUM_DOUBLE_DECL'
const struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
^
1 warning generated.
Remove the const after static to fix it.
Fixes:
df31007400c3 ("ASoC: rt1015: add rt1015 amplifier driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/845
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200124155750.33753-1-natechancellor@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marek Szyprowski [Thu, 23 Jan 2020 13:40:46 +0000 (14:40 +0100)]
ASoC: max98090: silence lockdep warning
Commit
08df0d9a00f7 ("ASoC: max98090: revert "ASoC: max98090: fix lockdep
warning"") provided a good rationale for removing separate lock for the
SHDN register access. However it restored the lockdep warning during the
system boot. To silence the lockdep warning, mark the mutex taken in the
max98090_shdn_save() function with the lockdep class dedicated for the
runtime DAPM operations: SND_SOC_DAPM_CLASS_RUNTIME. This finally fixes
the following lockdep warning observed on Exynos4412-based Odroid U3
board:
======================================================
WARNING: possible circular locking dependency detected
5.5.0-rc7-next-
20200123 #7329 Not tainted
------------------------------------------------------
alsactl/1105 is trying to acquire lock:
ed4f7cf4 (&card->dapm_mutex){+.+.}, at: max98090_shdn_save+0x1c/0x28
but task is already holding lock:
edb8d49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&card->controls_rwsem){++++}:
snd_ctl_add_replace+0x3c/0x84
dapm_create_or_share_kcontrol+0x24c/0x2e0
snd_soc_dapm_new_widgets+0x308/0x594
snd_soc_bind_card+0x834/0xa94
devm_snd_soc_register_card+0x34/0x6c
odroid_audio_probe+0x288/0x34c
platform_drv_probe+0x6c/0xa4
really_probe+0x200/0x48c
driver_probe_device+0x78/0x1f8
bus_for_each_drv+0x74/0xb8
__device_attach+0xd4/0x16c
bus_probe_device+0x88/0x90
deferred_probe_work_func+0x3c/0xd0
process_one_work+0x230/0x7bc
worker_thread+0x44/0x524
kthread+0x130/0x164
ret_from_fork+0x14/0x20
0x0
-> #0 (&card->dapm_mutex){+.+.}:
lock_acquire+0xe8/0x270
__mutex_lock+0x9c/0xb18
mutex_lock_nested+0x1c/0x24
max98090_shdn_save+0x1c/0x28
max98090_put_enum_double+0x20/0x40
snd_ctl_ioctl+0x190/0xbb8
ksys_ioctl+0x484/0xb10
ret_fast_syscall+0x0/0x28
0xbede0564
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
lock(&card->controls_rwsem);
lock(&card->dapm_mutex);
*** DEADLOCK ***
1 lock held by alsactl/1105:
#0:
edb8d49c (&card->controls_rwsem){++++}, at: snd_ctl_ioctl+0xcc/0xbb8
stack backtrace:
CPU: 2 PID: 1105 Comm: alsactl Not tainted 5.5.0-rc7-next-
20200123 #7329
Hardware name: Samsung Exynos (Flattened Device Tree)
[<
c01126f0>] (unwind_backtrace) from [<
c010e1e8>] (show_stack+0x10/0x14)
[<
c010e1e8>] (show_stack) from [<
c0b5234c>] (dump_stack+0xb4/0xe0)
[<
c0b5234c>] (dump_stack) from [<
c018a610>] (check_noncircular+0x1ec/0x208)
[<
c018a610>] (check_noncircular) from [<
c018ca2c>] (__lock_acquire+0x1210/0x25ec)
[<
c018ca2c>] (__lock_acquire) from [<
c018e728>] (lock_acquire+0xe8/0x270)
[<
c018e728>] (lock_acquire) from [<
c0b71928>] (__mutex_lock+0x9c/0xb18)
[<
c0b71928>] (__mutex_lock) from [<
c0b723c0>] (mutex_lock_nested+0x1c/0x24)
[<
c0b723c0>] (mutex_lock_nested) from [<
c086097c>] (max98090_shdn_save+0x1c/0x28)
[<
c086097c>] (max98090_shdn_save) from [<
c08613f8>] (max98090_put_enum_double+0x20/0x40)
[<
c08613f8>] (max98090_put_enum_double) from [<
c0833f20>] (snd_ctl_ioctl+0x190/0xbb8)
[<
c0833f20>] (snd_ctl_ioctl) from [<
c02cae14>] (ksys_ioctl+0x484/0xb10)
[<
c02cae14>] (ksys_ioctl) from [<
c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed331fa8 to 0xed331ff0)
...
Fixes:
08df0d9a00f7 ("ASoC: max98090: revert "ASoC: max98090: fix lockdep warning"")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200123134046.9769-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 22 Jan 2020 00:45:00 +0000 (09:45 +0900)]
ASoC: soc-core: remove null_snd_soc_ops
All rtd->dai_link callback functions are controlled by soc_rtd_xxxx(),
and checking rtd->dai_link->ops.
We don't need to have null_snd_soc_ops anymore.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhegl3oz.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 22 Jan 2020 00:44:56 +0000 (09:44 +0900)]
ASoC: soc-pcm: add soc_rtd_trigger()
Add soc_rtd_trigger() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rrsmi9j.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 22 Jan 2020 00:44:52 +0000 (09:44 +0900)]
ASoC: soc-pcm: add soc_rtd_hw_free()
Add soc_rtd_hw_free() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736c8mi9n.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 22 Jan 2020 00:44:48 +0000 (09:44 +0900)]
ASoC: soc-pcm: add soc_rtd_hw_params()
Add soc_rtd_hw_params() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kwomi9r.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 22 Jan 2020 00:44:44 +0000 (09:44 +0900)]
ASoC: soc-pcm: add soc_rtd_prepare()
Add soc_rtd_prepare() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zh4mi9v.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 22 Jan 2020 00:44:40 +0000 (09:44 +0900)]
ASoC: soc-pcm: add soc_rtd_shutdown()
Add soc_rtd_shutdown() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e1kmi9z.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Wed, 22 Jan 2020 00:44:35 +0000 (09:44 +0900)]
ASoC: soc-pcm: add soc_rtd_startup()
Add soc_rtd_startup() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878sm0mia4.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jack Yu [Wed, 15 Jan 2020 11:25:19 +0000 (19:25 +0800)]
ASoC: rt1015: add rt1015 amplifier driver
This is initial amplifier driver for rt1015.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20200115112519.22050-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Wed, 22 Jan 2020 10:45:59 +0000 (10:45 +0000)]
ASoC: madera: Correct some kernel doc
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200122104559.17043-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jeff Chang [Thu, 16 Jan 2020 05:46:37 +0000 (13:46 +0800)]
ASoC: Add MediaTek MT6660 Speaker Amp Driver
The MT6660 is a boosted BTL class-D amplifier with V/I sensing.
A built-in DC-DC step-up converter is used to provide efficient
power for class-D amplifier with multi-level class-G operation.
The digital audio interface supports I2S, left-justified,
right-justified, TDM and DSP A/B format for audio in with a data
out used for chip information like voltage sense and current
sense, which are able to be monitored via DATAO through proper
Signed-off-by: Jeff Chang <jeff_chang@richtek.com>
Link: https://lore.kernel.org/r/1579153597-23286-1-git-send-email-richtek.jeff.chang@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Matthias Brugger [Tue, 14 Jan 2020 15:01:50 +0000 (16:01 +0100)]
ASoC: dt-bindings: rt5645: add suppliers
The rt5645 and rt5650 have two suppliers, document them.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200114150151.8537-1-matthias.bgg@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Fri, 17 Jan 2020 07:38:14 +0000 (15:38 +0800)]
ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double()
Commit
62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when
changing sensitive registers SHDN bit") uses dapm_mutex to protect SHDN
bit. However, snd_soc_dapm_put_enum_double() in
max98090_dapm_put_enum_double() acquires the dapm_mutex again which
cause a deadlock.
Use snd_soc_dapm_put_enum_double_locked() instead to fix the deadlock.
Fixes:
62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when changing sensitive registers SHDN bit")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200117073814.82441-4-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Fri, 17 Jan 2020 07:38:13 +0000 (15:38 +0800)]
ASoC: dapm: add snd_soc_dapm_put_enum_double_locked
Adds snd_soc_dapm_put_enum_double_locked() for those use cases if
dapm_mutex has already locked.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200117073814.82441-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Fri, 17 Jan 2020 07:38:12 +0000 (15:38 +0800)]
ASoC: max98090: revert "ASoC: max98090: fix lockdep warning"
Commit
2dc98af62c32 ("ASoC: max98090: fix lockdep warning") introduced
a helpful-less small lock: shdn_lock. Reverts the commit.
Reasons:
1. Lockdep should not be happy by either the original or current code.
From lockdep's point of view, there is a lock inversion anyway.
Let d = dapm_mutex, c = controls_rwsem, s = shdn_lock,
From the reported calling stack: lock acquisition order of
snd_soc_register_card() is: d -> c.
> snd_ctl_add_replace+0x3c/0x84
> dapm_create_or_share_kcontrol+0x24c/0x2e0
> snd_soc_dapm_new_widgets+0x308/0x594
> snd_soc_bind_card+0x80c/0xad4
> devm_snd_soc_register_card+0x34/0x6c
If calling snd_soc_dapm_put_enum_double() in kcontrol's put (e.g.
SOC_DAPM_ENUM_EXT), lock acquisition order is: c -> d. Note that,
snd_soc_dapm_put_enum_double() acquires d.
The possible lock inversion is always there if registering sound card
and putting mixer control happen at the same time. In fact, it never
happens because the control device don't show up to the userspace until
the sound card build success.
Commit
2dc98af62c32 ("ASoC: max98090: fix lockdep warning") changes the
order to: c -> s -> d. The lock inversion is still there.
2. Commit
62d5ae4cafb7 ("ASoC: max98090: save and restore SHDN when
changing sensitive registers SHDN bit") designed to use dapm_mutex to
protect SHDN bit. Use a separate lock breaks the protection.
DAPM changes SHDN bit automatically when it finds the path. Thus, any
code wants to change the SHDN bit, need to acquire the dapm_mutex first.
> SND_SOC_DAPM_SUPPLY("SHDN", M98090_REG_DEVICE_SHUTDOWN,
> M98090_SHDNN_SHIFT, 0, NULL, 0),
Fixes:
2dc98af62c32 ("ASoC: max98090: fix lockdep warning")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200117073814.82441-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:05:07 +0000 (10:05 +0900)]
ASoC: soc-core: remove bus_control
Now, snd_soc_dai_driver::bus_control is used for how to resume.
But, no driver which has bus_control has DAI driver suspend/resume
support.
This patch removes pointless bus_control from ALSA SoC.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnffx7i4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:05:03 +0000 (10:05 +0900)]
ASoC: soc-core: remove DAI suspend/resume
Historically, CPU and Codec were implemented different, but now it is
merged as Component.
ALSA SoC is supporting suspend/resume at DAI and Component level.
The method is like below.
1) Suspend/Resume all CPU DAI if bus-control was 0
2) Suspend/Resume all Component
3) Suspend/Resume all CPU DAI if bus-control was 1
Historically 2) was Codec special operation.
Because CPU and Codec were merged into Component,
CPU suspend/resume has 3 chance to suspend(= 1/2/3), but
Codec suspend/resume has 1 chance (= 2).
Here, DAI side suspend/resume is caring bus-control, but no driver
which is supporting suspend/resume is setting bus-control.
This means 3) was never used.
Here, used parameter for suspend/resume component->dev and dai->dev are
same pointer.
For that reason, we can merge DAI and Component suspend/resume.
One note is that we should use 2), because it is caring BIAS level.
This patch removes 1) and 3).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1zvx7i8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:59 +0000 (10:04 +0900)]
ASoC: pxa: pxa2xx-i2s: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgkbx7ic.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:52 +0000 (10:04 +0900)]
ASoC: pxa: pxa-ssp: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can swtcih all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv4rx7ij.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:47 +0000 (10:04 +0900)]
ASoC: ux500: ux500_msp_dai: remove unused DAI .suspend/.resume
This patch removes unused DAI driver .suspend/.resume
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9p7x7io.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:42 +0000 (10:04 +0900)]
ASoC: samsung: i2s: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wo9nx7it.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:37 +0000 (10:04 +0900)]
ASoC: dwc: dwc-i2s: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2u3x7iy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:31 +0000 (10:04 +0900)]
ASoC: uniphier: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhejx7j4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:26 +0000 (10:04 +0900)]
ASoC: ti: omap-mcpdm: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/871rrvym3p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:18 +0000 (10:04 +0900)]
ASoC: sti: sti_uniperif: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736cbym3x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:13 +0000 (10:04 +0900)]
ASoC: samsung: spdif: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kwrym42.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:07 +0000 (10:04 +0900)]
ASoC: samsung: s3c24xx-i2s: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zh7ym48.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:04:01 +0000 (10:04 +0900)]
ASoC: mediatek: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e1nym4e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:03:56 +0000 (10:03 +0900)]
ASoC: jz4740: jz4740-i2s: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878sm3ym4j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:03:50 +0000 (10:03 +0900)]
ASoC: cirrus: ep93xx-i2s: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a76jym4p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:03:36 +0000 (10:03 +0900)]
ASoC: atmel: atmel_ssc_dai: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87d0bfym53.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 20 Jan 2020 01:03:43 +0000 (10:03 +0900)]
ASoC: bcm: cygnus-ssp: move .suspend/.resume to component
There is no big difference at implementation for .suspend/.resume
between DAI driver and Component driver.
But because some driver is using DAI version, thus ALSA SoC needs
to keep supporting it, hence, framework becoming verbose.
If we can switch all DAI driver .suspend/.resume to Component driver,
we can remove verbose code from ALSA SoC.
Driver is getting its private data via dai->dev.
But dai->dev and component->dev are same dev, thus, we can convert
these. For same reason, we can convert dai->active to
component->active if necessary.
This patch moves DAI driver .suspend/.resume to Component driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blqzym4w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Damian van Soelen [Wed, 15 Jan 2020 16:46:19 +0000 (17:46 +0100)]
ASoC: Intel: cht_bsw_rt5645: Remove unnecessary string buffers and snprintf calls
The snprintf calls filling cht_rt5645_cpu_dai_name /
cht_rt5645_codec_aif_name always fill them with the same string
("ssp0-port" resp "rt5645-aif2") so instead of keeping these buffers
around and making cpus->dai_name / codecs->dai_name point to this,
simply update the *->dai_name pointers to directly point to a string
constant containing the desired string.
Signed-off-by: Damian van Soelen <dj.vsoelen@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115164619.101705-5-hdegoede@redhat.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jordy Ubink [Wed, 15 Jan 2020 16:46:18 +0000 (17:46 +0100)]
ASoC: Intel: bytcr_rt5651: Remove unnecessary string buffers and snprintf calls
The snprintf calls filling byt_rt56*_codec_aif_name/byt_rt56*_cpu_dai_name
always fill them with the same string ("rt56*-aif2" resp. ssp0-port").
So instead of keeping these buffers around and making codecs->dai_name /
cpus->dai_name point to them, simply update the *->dai_name pointers to
directly point to a string constant containing the desired string.
Signed-off-by: Jordy Ubink <jordyubink@hotmail.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115164619.101705-4-hdegoede@redhat.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Nariman Etemadi [Wed, 15 Jan 2020 16:46:17 +0000 (17:46 +0100)]
ASoC: Intel: bytcr_rt5640: Remove unnecessary string buffers and snprintf calls
The snprintf calls filling byt_rt56*_codec_aif_name/byt_rt56*_cpu_dai_name
always fill them with the same string ("rt56*-aif2" resp. ssp0-port").
So instead of keeping these buffers around and making codecs->dai_name /
cpus->dai_name point to them, simply update the *->dai_name pointers to
directly point to a string constant containing the desired string.
Signed-off-by: Nariman Etemadi <narimantos@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115164619.101705-3-hdegoede@redhat.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Erik Bussing [Wed, 15 Jan 2020 16:46:16 +0000 (17:46 +0100)]
ASoC: Intel: bytcr_rt5640: Remove code duplication in byt_rt5640_codec_fixup
The 16 and 24 bit paths in byt_rt5640_codec_fixup are mostly identical,
introduce a local bits variable to address the only difference and move
the common bits out of the if ... else ... .
Signed-off-by: Erik Bussing <eabbussing@outlook.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200115164619.101705-2-hdegoede@redhat.com
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Stephan Gerhold [Tue, 14 Jan 2020 18:12:29 +0000 (19:12 +0100)]
ASoC: msm8916-wcd-analog: Add MIC BIAS Internal3
PM8916 has three TX inputs that each have an (optional) internal
RBIAS resistor. MIC BIAS Internal1/2 (for TX1/2) are already supported.
TX3 does not have its own MIC BIAS supply, instead it is also supplied
from MIC_BIAS1.
Now that we have simplified the MIC BIAS Internal* implementation
we can easily add support for it:
Add a MIC BIAS Internal3 supply that enables the internal RBIAS
resistor on TX3, and make sure to also enable the MIC_BIAS1 supply.
Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # longcheer-l8150
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200114181229.42302-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Stephan Gerhold [Tue, 14 Jan 2020 18:12:28 +0000 (19:12 +0100)]
ASoC: msm8916-wcd-analog: Simplify MIC BIAS Internal
At the moment, MIC BIAS Internal* and MIC BIAS External* both reference
the same register, and have a part of their initialization sequence
duplicated.
For example, the sequence for enabling MIC BIAS Internal1 is:
I1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN)
I2. Enable internal RBIAS (TX1_INT_RBIAS_EN bit in CDC_A_MICB_1_INT_RBIAS)
The sequence for enabling MIC BIAS External1 is:
E1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN)
(E2. Ideally, make sure internal RBIAS is disabled. However, this should
not happen in practice because DAPM will disable unused supplies...)
Right now we have:
SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_EN, 7, 0, ...) // I1
SND_SOC_DAPM_SUPPLY("MIC BIAS External1", CDC_A_MICB_1_EN, 7, 0, ...) // E1
and I2 is done in the PM event handler (pm8916_wcd_analog_enable_micbias_int1).
We can simplify this by defining a common DAPM supply for I1/E1 ("MIC_BIAS1"),
and one DAPM supply for I2 ("MIC BIAS Internal1"). Additional DAPM routes
ensure that we also enable the MIC_BIAS1 supply for the internal and external
pull up resistor.
Another advantage of this is that we now disable the internal RBIAS
when it is not needed. This makes it much easier to add support for
MIC BIAS Internal3 as a next step.
Tested-by: Nikita Travkin <nikitos.tr@gmail.com> # longcheer-l8150
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200114181229.42302-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Fri, 17 Jan 2020 15:38:56 +0000 (15:38 +0000)]
Merge tag 'asoc-fix-v5.5-rc6' into asoc-5.6
ASoC: Fixes for v5.5
This is mostly driver specific fixes, plus an error handling fix
in the core. There is a rather large diffstat for the stm32 SAI
driver, this is a very large but mostly mechanical update which
wraps every register access in the driver to allow a fix to the
locking which avoids circular locks, the active change is much
smaller and more reasonably sized.
Ravulapati Vishnu vardhan rao [Fri, 17 Jan 2020 11:45:09 +0000 (17:15 +0530)]
ASoC: amd: Additional DAI for I2S SP instance.
I2S SP instance has separate BCLK and LRCLK for Tx and Rx.
Creating additional DAI for Rx.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1579261510-12580-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Yongjun [Fri, 17 Jan 2020 02:41:49 +0000 (02:41 +0000)]
ASoC: rt715: fix return value check in rt715_sdw_probe()
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Fixes:
d1ede0641b05 ("ASoC: rt715: add RT715 codec driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200117024149.75515-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Yongjun [Wed, 15 Jan 2020 14:30:34 +0000 (14:30 +0000)]
ASoC: rt711: fix return value check in rt711_sdw_probe()
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Fixes:
320b8b0d13b8 ("ASoC: rt711: add rt711 codec driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200115143034.94492-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Yongjun [Wed, 15 Jan 2020 14:30:27 +0000 (14:30 +0000)]
ASoC: rt700: fix return value check in rt700_sdw_probe()
In case of error, the function devm_regmap_init() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Fixes:
7d2a5f9ae41e ("ASoC: rt700: add rt700 codec driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200115143027.94364-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
YueHaibing [Thu, 16 Jan 2020 02:11:42 +0000 (02:11 +0000)]
ASoC: rt715: remove unused including <linux/version.h>
Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200116021142.149000-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shuming Fan [Thu, 16 Jan 2020 09:18:54 +0000 (17:18 +0800)]
ASoC: rt1011: set the different setting for QFN/WLCSP package
The QFN package is a new one.
There is a different initial setting to the chip of QFN and WLCSP package.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200116091854.18095-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Tue, 14 Jan 2020 16:18:40 +0000 (16:18 +0000)]
ASoC: madera: Correct error path handling in madera_out1_demux_put
Should the write to MADERA_OUTPUT_ENABLES_1 fail and out_clamp[0] not be
set an additional error message will be printed. Clear the ret variable
to avoid this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200114161841.451-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Wed, 15 Jan 2020 14:12:12 +0000 (14:12 +0000)]
Merge branch 'topic/equal' of https://git./linux/kernel/git/broonie/regulator into asoc-5.6
Stephen Rothwell [Wed, 15 Jan 2020 01:02:58 +0000 (12:02 +1100)]
regulator fix for "regulator: core: Add regulator_is_equal() helper"
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200115120258.0e535fcb@canb.auug.org.au
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Marek Vasut [Thu, 19 Dec 2019 21:32:19 +0000 (22:32 +0100)]
ASoC: sgtl5000: add multi endpoint support
Support multiple endpoints on SGTL5000 codec port when used in
of_graph context.
This patch allows to share the codec port between two CPU DAIs.
Example:
Custom STM32MP157C board uses SGTL5000 audio codec. This codec is
connected to two serial audio interfaces, which are configured
either as rx or tx.
From AsoC point of view the topolgy is the following:
// 2 CPU DAIs (SAI2A/B), 1 Codec (SGTL5000)
Playback: CPU-A-DAI(slave) -> (master)CODEC-DAI/port0
Record: CPU-B-DAI(slave) <- (master)CODEC-DAI/port0
In the DT two endpoints have to be associated to the codec port:
sgtl5000_port: port {
sgtl5000_tx_endpoint: endpoint@0 {
remote-endpoint = <&sai2a_endpoint>;
};
sgtl5000_rx_endpoint: endpoint@1 {
remote-endpoint = <&sai2b_endpoint>;
};
};
However, when the audio graph card parses the codec nodes, it expects
to find DAI interface indexes matching the endpoints indexes.
The current patch forces the use of DAI id 0 for both endpoints,
which allows to share the codec DAI between the two CPU DAIs
for playback and capture streams respectively.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191219213219.366073-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Shengjiu Wang [Wed, 4 Dec 2019 12:00:19 +0000 (20:00 +0800)]
ASoC: fsl_asrc: Add support for imx8qm & imx8qxp
There are two asrc module in imx8qm & imx8qxp, each module has
different clock configuration, and the DMA type is EDMA.
So in this patch, we define the new clocks, refine the clock map,
and include struct fsl_asrc_soc_data for different soc usage.
The EDMA channel is fixed with each dma request, one dma request
corresponding to one dma channel. So we need to request dma
channel with dma request of asrc module.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/f33dfe3157b5ab200e09ccbf9ab73d31fac6664b.1575452454.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shengjiu Wang [Wed, 4 Dec 2019 12:00:18 +0000 (20:00 +0800)]
ASoC: dt-bindings: fsl_asrc: add compatible string for imx8qm & imx8qxp
Add compatible string "fsl,imx8qm-asrc" for imx8qm platform,
"fsl,imx8qxp-asrc" for imx8qxp platform.
There are two asrc modules in imx8qm & imx8qxp, the clock mapping is
different for each other, so add new property "fsl,asrc-clk-map"
to distinguish them.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/b9352edb014c1ee8530c0fd8829c2b044b3da649.1575452454.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marek Vasut [Fri, 20 Dec 2019 16:44:50 +0000 (17:44 +0100)]
ASoC: sgtl5000: Fix VDDA and VDDIO comparison
Comparing the voltage of VDDA and VDDIO to determine whether or not to
enable VDDC manual override is insufficient. This is a problem in case
the VDDA is supplied from different regulator than VDDIO, while both
report the same voltage to the regulator framework. In that case where
VDDA and VDDIO is supplied by different regulators, the VDDC manual
override must not be applied.
Fixes:
b6319b061ba2 ("ASoC: sgtl5000: Fix charge pump source assignment")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20191220164450.1395038-2-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Tue, 14 Jan 2020 15:52:48 +0000 (15:52 +0000)]
Merge tag 'regulator-eq' of https://git./linux/kernel/git/broonie/regulator into asoc-5.6
regulator: add regulator_equal()
Marek Vasut [Fri, 20 Dec 2019 16:44:49 +0000 (17:44 +0100)]
regulator: core: Add regulator_is_equal() helper
Add regulator_is_equal() helper to compare whether two regulators are
the same. This is useful for checking whether two separate regulators
in a driver are actually the same supply.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20191220164450.1395038-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Paul Cercueil [Tue, 24 Dec 2019 00:27:08 +0000 (01:27 +0100)]
ASoC: codecs: Add jz4770-codec driver
Add jz4770-codec driver to support the internal CODEC found in the
JZ4770 SoC from Ingenic.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Link: https://lore.kernel.org/r/20191224002708.1207884-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Paul Cercueil [Tue, 24 Dec 2019 00:27:07 +0000 (01:27 +0100)]
dt-bindings: sound: Convert jz47*-codec doc to YAML
Convert ingenic,jz4740-codec.txt and ingenic,jz4725b-codec.txt to one
single ingenic,codec.yaml file, since they share the same binding.
Add the ingenic,jz4770-codec compatible string in the process.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191224002708.1207884-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Dmitry Torokhov [Fri, 3 Jan 2020 01:17:54 +0000 (17:17 -0800)]
ASoC: Intel: bytcr_rt5651: switch to using devm_fwnode_gpiod_get()
devm_fwnode_get_index_gpiod_from_child() is going away as the name is
too unwieldy, let's switch to using the new devm_fwnode_gpiod_get().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20200103011754.GA260926@dtor-ws
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 13 Jan 2020 21:04:28 +0000 (15:04 -0600)]
ASoC: Intel: bytcr_rt5651: remove unused variable
Fix GCC warning with W=1
sound/soc/intel//boards/bytcr_rt5651.c:659:40: warning:
‘byt_rt5651_dai_params’ defined but not used
[-Wunused-const-variable=]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 13 Jan 2020 21:04:27 +0000 (15:04 -0600)]
ASoC: Intel: bytcr_rt5640: remove unused variable
Fix GCC warning with W=1
sound/soc/intel//boards/bytcr_rt5640.c:936:40: warning:
‘byt_rt5640_dai_params’ defined but not used
[-Wunused-const-variable=]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 13 Jan 2020 21:04:26 +0000 (15:04 -0600)]
ASoC: Intel: bytcht_es8316: removed unused variable
fix GCC warning with W=1
sound/soc/intel//boards/bytcht_es8316.c:237:40: warning:
‘byt_cht_es8316_dai_params’ defined but not used
[-Wunused-const-variable=]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 13 Jan 2020 21:04:25 +0000 (15:04 -0600)]
ASoC: Intel: skl_rt286: rename shadowed variable
Fix cppcheck warning:
[sound/soc/intel/boards/skl_rt286.c:171] ->
[sound/soc/intel/boards/skl_rt286.c:214]: (style) Local variable
'channels' shadows outer variable
[sound/soc/intel/boards/skl_rt286.c:171] ->
[sound/soc/intel/boards/skl_rt286.c:250]: (style) Local variable
'channels' shadows outer variable
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 13 Jan 2020 21:04:24 +0000 (15:04 -0600)]
ASoC: Intel: skl_nau88l25_ssm4567: rename shadowed variable
Fix cppcheck warning
[sound/soc/intel/boards/skl_nau88l25_ssm4567.c:277] ->
[sound/soc/intel/boards/skl_nau88l25_ssm4567.c:320]: (style) Local
variable 'channels' shadows outer variable
[sound/soc/intel/boards/skl_nau88l25_ssm4567.c:277] ->
[sound/soc/intel/boards/skl_nau88l25_ssm4567.c:337]: (style) Local
variable 'channels' shadows outer variable
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 13 Jan 2020 21:04:23 +0000 (15:04 -0600)]
ASoC: Intel: skl_nau88l25_max98357a: rename shadowed variable
Fix cppcheck warning:
[sound/soc/intel/boards/skl_nau88l25_max98357a.c:257] ->
[sound/soc/intel/boards/skl_nau88l25_max98357a.c:142]: (style) Local
variable 'channels' shadows outer variable
[sound/soc/intel/boards/skl_nau88l25_max98357a.c:257] ->
[sound/soc/intel/boards/skl_nau88l25_max98357a.c:318]: (style) Local
variable 'channels' shadows outer variable
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 13 Jan 2020 21:04:22 +0000 (15:04 -0600)]
ASOC: Intel: kbl_rt5663_rt5514_max98927: remove useless initialization
Fix cppcheck warning:
[sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c:764]: (style)
Variable 'ret' is assigned a value that is never used.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113210428.27457-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>