OSDN Git Service
Ido Schimmel [Tue, 16 Mar 2021 15:02:59 +0000 (17:02 +0200)]
mlxsw: spectrum_matchall: Add support for egress sampling
Allow user space to install a matchall classifier with sample action on
egress. This is only supported on Spectrum-2 onwards, so Spectrum-1 will
continue to return an error.
Programming the hardware to sample on egress is identical to ingress
sampling with the sole change of using a different sampling trigger.
Upon receiving a sampled packet, the sampling trigger (ingress vs.
egress) will be encoded in the mirroring reason in the Completion Queue
Element (CQE). The mirroring reason is used to lookup the sampling
parameters (e.g., psample group) which are passed to the psample module.
Note that locally generated packets that are sampled are simply
consumed. This is done for several reasons.
First, such packets do not have an ingress netdev given that their Rx
local port is the CPU port. This breaks several basic assumptions.
Second, sampling using the same interface (tc), but with flower
classifier will not result in locally generated packets being sampled
given that such packets are not subject to the policy engine.
Third, realistically, this is not a big deal given that the vast
majority of the packets being transmitted through the port are not
locally generated packets.
Fourth, if such packets do need to be sampled, they can be sampled with
a 'skip_hw' filter and reported to the same sampling group as the data
path packets. The software sampling rate can also be adjusted to fit the
rate of the locally generated packets which is much lower than the rate
of the data path traffic.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 16 Mar 2021 15:02:58 +0000 (17:02 +0200)]
mlxsw: spectrum: Start using sampling triggers hash table
Start using the previously introduced sampling triggers hash table to
store sampling parameters instead of storing them as attributes of the
sampled port.
This makes it easier to introduce new sampling triggers.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 16 Mar 2021 15:02:57 +0000 (17:02 +0200)]
mlxsw: spectrum: Track sampling triggers in a hash table
Currently, mlxsw supports a single sampling trigger type (i.e., received
packet). When sampling is configured on an ingress port, the sampling
parameters (e.g., pointer to the psample group) are stored as an
attribute of the port, so that they could be passed to
psample_sample_packet() when a sampled packet is trapped to the CPU.
Subsequent patches are going to add more types of sampling triggers,
making it difficult to maintain the current scheme.
Instead, store all the active sampling triggers with their associated
parameters in a hash table. That way, more trigger types can be easily
added.
The next patch will flip mlxsw to use the hash table instead of the
current scheme.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 16 Mar 2021 15:02:56 +0000 (17:02 +0200)]
mlxsw: spectrum_matchall: Pass matchall entry to sampling operations
The entry will be required by the next patches, so pass it. No
functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 16 Mar 2021 15:02:55 +0000 (17:02 +0200)]
mlxsw: spectrum_matchall: Push sampling checks to per-ASIC operations
Push some sampling checks to the per-ASIC operations, as they are no
longer relevant for all ASICs.
The sampling rate validation against the MPSC maximum rate is only
relevant for Spectrum-1, as Spectrum-2 and later ASICs no longer use
MPSC register for sampling.
The ingress / egress validation is pushed down to the per-ASIC
operations since subsequent patches are going to remove it for
Spectrum-2 and later ASICs.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 16 Mar 2021 15:02:54 +0000 (17:02 +0200)]
mlxsw: spectrum_matchall: Propagate extack further
Due to the differences between Spectrum-1 and later ASICs, some of the
checks currently performed at the common code (where extack is
available) will need to be pushed to the per-ASIC operations.
As a preparation, propagate extack further to maintain proper error
reporting.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Mar 2021 22:29:49 +0000 (15:29 -0700)]
Merge branch 'dpaa2-switch-small-cleanup'
Ioana Ciornei says:
====================
dpaa2-switch: small cleanup
This patch set addresses various low-hanging issues in both dpaa2-switch
and dpaa2-eth drivers.
Unused ABI functions are removed from dpaa2-switch, all the kernel-doc
warnings are fixed up in both drivers and the coding style for the
remaining ABIs is fixed-up a bit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Tue, 16 Mar 2021 14:55:12 +0000 (16:55 +0200)]
dpaa2-eth: fixup kdoc warnings
Running kernel-doc over the dpaa2-eth driver generates a bunch of
warnings. Fix them up by removing code comments for macros which are
self-explanatory, respecting the kdoc format for macro documentation and
other small changes like describing the expected return values of
functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Tue, 16 Mar 2021 14:55:11 +0000 (16:55 +0200)]
dpaa2-switch: fit the function declaration on the same line
Multiple ABI function declarations are split unnecessarry on multiple
lines. Fix this so that we have a consistent coding style.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Tue, 16 Mar 2021 14:55:10 +0000 (16:55 +0200)]
dpaa2-switch: reduce the size of the if_id bitmap to 64 bits
The maximum number of DPAA2 switch interfaces, including the control
interface, is 64. Even though this restriction existed from the first
place, the command structures which use an interface id bitmap were
poorly described and even though a single uint64_t is enough, all of
them used an array of 4 uint64_t's.
Fix this by reducing the size of the interface id field to a single
uint64_t.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Tue, 16 Mar 2021 14:55:09 +0000 (16:55 +0200)]
dpaa2-switch: fix kdoc warnings
Running kernel-doc over the dpaa2-switch driver generates a bunch of
warnings. Fix them up by removing code comments for macros which are
self-explanatory and adding a bit more context for the
dpsw_if_get_port_mac_addr() function and the fields of the
dpsw_vlan_if_cfg structure.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Tue, 16 Mar 2021 14:55:08 +0000 (16:55 +0200)]
dpaa2-switch: remove unused ABI functions
Cleanup the dpaa2-switch driver a bit by removing any unused MC firmware
ABI definitions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zihao Tang [Tue, 16 Mar 2021 09:41:06 +0000 (17:41 +0800)]
net: ipa: Remove useless error message
Fix the following coccicheck report:
drivers/net/ipa/gsi.c:1341:2-9:
line 1341 is redundant because platform_get_irq() already prints an error
Remove dev_err() messages after platform_get_irq_byname() failures.
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Mar 2021 22:13:45 +0000 (15:13 -0700)]
Merge branch 'switchdev-dsa-docs'
Vladimir Oltean says:
====================
Documentation updates for switchdev and DSA
Many changes were made to the code but of course the documentation was
not kept up to date. This is an attempt to update some of the verbiage.
The documentation is still not complete, but it's time to make some more
changes to the code first, before documenting the rest.
Changes in v2:
Integrated feedback from Andrew, Florian, Tobias, Ido, George.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:19 +0000 (13:24 +0200)]
Documentation: networking: switchdev: fix command for static FDB entries
The "bridge fdb add" command provided in the switchdev documentation is
junk now, not only because it is syntactically incorrect and rejected by
the iproute2 bridge program, but also because it was not updated in
light of Arkadi Sharshevsky's radical switchdev refactoring in commit
29ab586c3d83 ("net: switchdev: Remove bridge bypass support from
switchdev"). Try to explain what the intended usage pattern is with the
new kernel implementation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 16 Mar 2021 11:24:18 +0000 (13:24 +0200)]
Documentation: networking: switchdev: clarify device driver behavior
This patch provides details on the expected behavior of switchdev
enabled network devices when operating in a "stand alone" mode, as well
as when being bridge members. This clarifies a number of things that
recently came up during a bug fixing session on the b53 DSA switch
driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:17 +0000 (13:24 +0200)]
Documentation: networking: dsa: add paragraph for the HSR/PRP offload
Add a short summary of the methods that a driver writer must implement
for offloading a HSR/PRP network interface.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:16 +0000 (13:24 +0200)]
Documentation: networking: dsa: add paragraph for the MRP offload
Add a short summary of the methods that a driver writer must implement
for getting an MRP instance to work on top of a DSA switch.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:15 +0000 (13:24 +0200)]
Documentation: networking: dsa: add paragraph for the LAG offload
Add a short summary of the methods that a driver writer must implement
for offloading a link aggregation group, and what is still missing.
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:14 +0000 (13:24 +0200)]
Documentation: networking: dsa: mention integration with devlink
Add a short summary of the devlink features supported by the DSA core.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:13 +0000 (13:24 +0200)]
Documentation: networking: dsa: document the port_bridge_flags method
The documentation was already lagging behind by not mentioning the old
version of port_bridge_flags (port_set_egress_floods). So now we are
skipping one step and just explaining how a DSA driver should configure
address learning and flooding settings.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:12 +0000 (13:24 +0200)]
Documentation: networking: dsa: remove TODO about porting more vendor drivers
On one hand, the link is dead and therefore useless.
On the other hand, there are always more drivers to port, but at this
stage, DSA does not need to affirm itself as the driver model to use for
Ethernet-connected switches (since we already have 15 tagging protocols
supported and probably more switch families from various vendors), so
there is nothing actionable to do.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:11 +0000 (13:24 +0200)]
Documentation: networking: dsa: remove references to switchdev prepare/commit
After the recent series containing commit
bae33f2b5afe ("net: switchdev:
remove the transaction structure from port attributes"), there aren't
prepare/commit transactional phases anymore in most of the switchdev
objects/attributes, and as a result, there aren't any in the DSA driver
API either. So remove this piece.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:10 +0000 (13:24 +0200)]
Documentation: networking: dsa: remove static port count from limitations
After Vivien's series from 2019 containing commits
27d4d19d7c82 ("net:
dsa: remove limitation of switch index value") and
ab8ccae122a4 ("net:
dsa: add ports list in the switch fabric"), this is basically no longer
true.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:09 +0000 (13:24 +0200)]
Documentation: networking: dsa: rewrite chapter about tagging protocol
The chapter about tagging protocols is out of date because it doesn't
mention all taggers that have been added since last documentation
update. But judging based on that, it will always tend to lag behind,
and there's no good reason why we would enumerate the supported
hardware. Instead we could do something more useful and explain what
there is to know about tagging protocols instead.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 Mar 2021 11:24:08 +0000 (13:24 +0200)]
Documentation: networking: update the graphical representation
While preparing some slides for a customer presentation, I found the
existing high-level view to be a bit confusing, so I modified it a
little bit.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Mar 2021 22:04:30 +0000 (15:04 -0700)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-03-15
This series contains updates to e1000e only.
Chen Yu says:
The NIC is put in runtime suspend status when there is no cable connected.
As a result, it is safe to keep non-wakeup NIC in runtime suspended during
s2ram because the system does not rely on the NIC plug event nor WoL to
wake up the system. Besides that, unlike the s2idle, s2ram does not need to
manipulate S0ix settings during suspend.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yejune Deng [Tue, 16 Mar 2021 02:57:36 +0000 (10:57 +0800)]
net: ipv4: route.c: simplify procfs code
proc_creat_seq() that directly take a struct seq_operations,
and deal with network namespaces in ->open.
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Mar 2021 18:57:57 +0000 (11:57 -0700)]
Merge branch 'bridge-m,cast-cleanups'
Nikolay Aleksandrov says:
====================
net: bridge: mcast: simplify allow/block EHT code
The set does two minor cleanups of the EHT allow/block handling code:
patch 01 removes code which is unreachable (it was used in initial EHT
versions, but isn't anymore) and prepares the allow/block functions to be
factored out. Patch 02 factors out common allow/block handling code.
There are no functional changes.
v2: send patch 02 and the proper version of both patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Mon, 15 Mar 2021 17:13:42 +0000 (19:13 +0200)]
net: bridge: mcast: factor out common allow/block EHT handling
We hande EHT state change for ALLOW messages in INCLUDE mode and for
BLOCK messages in EXCLUDE mode similarly - create the new set entries
with the proper filter mode. We also handle EHT state change for ALLOW
messages in EXCLUDE mode and for BLOCK messages in INCLUDE mode in a
similar way - delete the common entries (current set and new set).
Factor out all the common code as follows:
- ALLOW/INCLUDE, BLOCK/EXCLUDE: call __eht_create_set_entries()
- ALLOW/EXCLUDE, BLOCK/INCLUDE: call __eht_del_common_set_entries()
The set entries creation can be reused in __eht_inc_exc() as well.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Mon, 15 Mar 2021 17:13:41 +0000 (19:13 +0200)]
net: bridge: mcast: remove unreachable EHT code
In the initial EHT versions there were common functions which handled
allow/block messages for both INCLUDE and EXCLUDE modes, but later they
were separated. It seems I've left some common code which cannot be
reached because the filter mode is checked before calling the respective
functions, i.e. the host filter is always in EXCLUDE mode when using
__eht_allow_excl() and __eht_block_excl() thus we can drop the host_excl
checks inside and simplify the code a bit.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Mon, 15 Mar 2021 17:09:40 +0000 (01:09 +0800)]
net: dsa: mt7530: support MDB and bridge flag operations
Support port MDB and bridge flag operations.
As the hardware can manage multicast forwarding itself, offload_fwd_mark
can be unconditionally set to true.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Mar 2021 18:52:18 +0000 (11:52 -0700)]
Merge branch 'bcm6368'
Álvaro Fernández Rojas says:
====================
net: mdio: Add BCM6368 MDIO mux bus controller
This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
SoCs.
v2: add changes suggested by Andrew Lunn and Jakub Kicinski.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Álvaro Fernández Rojas [Mon, 15 Mar 2021 15:45:28 +0000 (16:45 +0100)]
net: mdio: Add BCM6368 MDIO mux bus controller
This controller is present on BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268
SoCs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Álvaro Fernández Rojas [Mon, 15 Mar 2021 15:45:27 +0000 (16:45 +0100)]
dt-bindings: net: Add bcm6368-mdio-mux bindings
Add documentations for bcm6368 mdio mux driver.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Thu, 11 Mar 2021 07:23:09 +0000 (23:23 -0800)]
net: lapbether: Prevent racing when checking whether the netif is running
There are two "netif_running" checks in this driver. One is in
"lapbeth_xmit" and the other is in "lapbeth_rcv". They serve to make
sure that the LAPB APIs called in these functions are called before
"lapb_unregister" is called by the "ndo_stop" function.
However, these "netif_running" checks are unreliable, because it's
possible that immediately after "netif_running" returns true, "ndo_stop"
is called (which causes "lapb_unregister" to be called).
This patch adds locking to make sure "lapbeth_xmit" and "lapbeth_rcv" can
reliably check and ensure the netif is running while doing their work.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Mar 2021 18:17:59 +0000 (11:17 -0700)]
Merge branch 'ipa-qmi-fixes'
Alex Elder says:
====================
net: ipa: QMI fixes
Mani Sadhasivam discovered some errors in the definitions of some
QMI messages used for IPA. This series addresses those errors,
and extends the definition of one message type to include some
newly-defined fields.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 15:21:12 +0000 (10:21 -0500)]
net: ipa: extend the INDICATION_REGISTER request
The specified format of the INDICATION_REGISTER QMI request message
has been extended to support two more optional fields:
endpoint_desc_ind:
sender wishes to receive endpoint descriptor information via
an IPA ENDP_DESC indication QMI message
bw_change_ind:
sender wishes to receive bandwidth change information via
an IPA BW_CHANGE indication QMI message
Add definitions that permit these fields to be formatted and parsed
by the QMI library code.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 15:21:11 +0000 (10:21 -0500)]
net: ipa: fix another QMI message definition
The ipa_init_modem_driver_req_ei[] encoding array for the
INIT_MODEM_DRIVER request message has some errors in it.
First, the tlv_type associated with the hw_stats_quota_size field is
wrong; it duplicates the valiue used for the hw_stats_quota_base_addr
field (0x1f) and should use 0x20 instead. The tlv_type value for
the hw_stats_drop_size field also uses the same duplicate value; it
should use 0x22 instead.
Second, there is no definition for the hw_stats_drop_base_addr
field. It is an optional 32-bit enumerated type value.
Finally, the hw_stats_quota_base_addr, hw_stats_quota_size, and
hw_stats_drop_size fields are defined as enumerated types; they
should be unsigned 4-byte values.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 15:21:10 +0000 (10:21 -0500)]
net: ipa: fix a duplicated tlv_type value
In the ipa_indication_register_req_ei[] encoding array, the tlv_type
associated with the ipa_mhi_ready_ind field is wrong. It duplicates
the value used for the data_usage_quota_reached field (0x11) and
should use value 0x12 instead. Fix this bug.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Mon, 15 Mar 2021 14:43:23 +0000 (14:43 +0000)]
net: dsa: sja1105: fix error return code in sja1105_cls_flower_add()
The return value 'rc' maybe overwrite to 0 in the flow_action_for_each
loop, the error code from the offload not support error handling will
not set. This commit fix it to return -EOPNOTSUPP.
Fixes:
6a56e19902af ("flow_offload: reject configuration of packet-per-second policing in offload drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Álvaro Fernández Rojas [Mon, 15 Mar 2021 14:14:23 +0000 (15:14 +0100)]
net: dsa: b53: spi: allow device tree probing
Add missing of_match_table to allow device tree probing.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calvin Johnson [Mon, 15 Mar 2021 10:49:05 +0000 (16:19 +0530)]
net: mdio: Alphabetically sort header inclusion
Alphabetically sort header inclusion
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Mar 2021 04:27:06 +0000 (21:27 -0700)]
Merge branch 'ionic-tx-updates'
Shannon Nelson says:
====================
ionic Tx updates
Just as the Rx path recently got a face lift, it is time for the Tx path to
get some attention. The original TSO-to-descriptor mapping was ugly and
convoluted and needed some deep work. This series pulls the dma mapping
out of the descriptor frag mapping loop and makes the dma mapping more
generic for use in the non-TSO case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 16 Mar 2021 02:31:36 +0000 (19:31 -0700)]
ionic: aggregate Tx byte counting calls
Gather the Tx packet and byte counts and call
netdev_tx_completed_queue() only once per clean cycle.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 16 Mar 2021 02:31:35 +0000 (19:31 -0700)]
ionic: simplify tx clean
The descriptor mappings are set up the same way whether
or not it is a TSO, so we don't need separate logic for
the two cases.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 16 Mar 2021 02:31:34 +0000 (19:31 -0700)]
ionic: generic tx skb mapping
Make the new ionic_tx_map_tso() usable by the non-TSO paths,
and pull the call up a level into ionic_tx() before calling
the csum or no-csum routines.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 16 Mar 2021 02:31:33 +0000 (19:31 -0700)]
ionic: simplify TSO descriptor mapping
One issue with the original TSO code was that it was working too
hard to deal with skb layouts that were never going to show up,
such as an skb->data that was longer than a single descriptor's
length. The other issue was trying to arrange the fragment dma
mapping at the same time as figuring out the descriptors needed.
There was just too much going on at the same time.
Now we do the dma mapping first, which sets up the buffers with
skb->data in buf[0] and the remaining frags in buf[1..n-1].
Next we spread the bufs across the descriptors needed, where
each descriptor gets up to mss number of bytes.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Mar 2021 03:41:59 +0000 (20:41 -0700)]
Merge branch 'net-qualcomm-rmnet-stop-using-C-bit-fields'
Alex Elder says:
====================
net: qualcomm: rmnet: stop using C bit-fields
Version 6 is the same as version 5, but has been rebased on updated
net-next/master. With any luck, the patches I'm sending out this
time won't contain garbage.
Version 5 of this series responds to a suggestion made by Alexander
Duyck, to determine the offset to the checksummed range of a packet
using skb_network_header_len() on patch 2. I have added his
Reviewed-by tag to all (other) patches, and removed Bjorn's from
patch 2.
The change required some updates to the subsequent patches, and I
reordered some assignments in a minor way in the last patch.
I don't expect any more discussion on this series (but will respond
if there is any). So at this point I would really appreciate it
if KS and/or Sean would offer a review, or at least acknowledge it.
I presume you two are able to independently test the code as well,
so I request that, and hope you are willing to do so.
Version 4 of this series is here:
https://lore.kernel.org/netdev/
20210315133455.
1576188-1-elder@linaro.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 21:51:51 +0000 (16:51 -0500)]
net: qualcomm: rmnet: don't use C bit-fields in rmnet checksum header
Replace the use of C bit-fields in the rmnet_map_ul_csum_header
structure with a single two-byte (big endian) structure member,
and use masks to encode or get values within it. The content of
these fields can be accessed using simple bitwise AND and OR
operations on the (host byte order) value of the new structure
member.
Previously rmnet_map_ipv4_ul_csum_header() would update C bit-field
values in host byte order, then forcibly fix their byte order using
a combination of byte swap operations and types.
Instead, just compute the value that needs to go into the new
structure member and save it with a simple byte-order conversion.
Make similar simplifications in rmnet_map_ipv6_ul_csum_header().
Finally, in rmnet_map_checksum_uplink_packet() a set of assignments
zeroes every field in the upload checksum header. Replace that with
a single memset() operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 21:51:50 +0000 (16:51 -0500)]
net: qualcomm: rmnet: don't use C bit-fields in rmnet checksum trailer
Replace the use of C bit-fields in the rmnet_map_dl_csum_trailer
structure with a single one-byte field, using constant field masks
to encode or get at embedded values.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 21:51:49 +0000 (16:51 -0500)]
net: qualcomm: rmnet: use masks instead of C bit-fields
The actual layout of bits defined in C bit-fields (e.g. int foo : 3)
is implementation-defined. Structures defined in <linux/if_rmnet.h>
address this by specifying all bit-fields twice, to cover two
possible layouts.
I think this pattern is repetitive and noisy, and I find the whole
notion of compiler "bitfield endianness" to be non-intuitive.
Stop using C bit-fields for the command/data flag and the pad length
fields in the rmnet_map structure, and define a single-byte flags
field instead. Define a mask for the single-bit "command" flag,
and another mask for the encoded pad length. The content of both
fields can be accessed using a simple bitwise AND operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 21:51:48 +0000 (16:51 -0500)]
net: qualcomm: rmnet: kill RMNET_MAP_GET_*() accessor macros
The following macros, defined in "rmnet_map.h", assume a socket
buffer is provided as an argument without any real indication this
is the case.
RMNET_MAP_GET_MUX_ID()
RMNET_MAP_GET_CD_BIT()
RMNET_MAP_GET_PAD()
RMNET_MAP_GET_CMD_START()
RMNET_MAP_GET_LENGTH()
What they hide is pretty trivial accessing of fields in a structure,
and it's much clearer to see this if we do these accesses directly.
So rather than using these accessor macros, assign a local
variable of the map header pointer type to the socket buffer data
pointer, and derereference that pointer variable.
In "rmnet_map_data.c", use sizeof(object) rather than sizeof(type)
in one spot. Also, there's no need to byte swap 0; it's all zeros
irrespective of endianness.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 21:51:47 +0000 (16:51 -0500)]
net: qualcomm: rmnet: simplify some byte order logic
In rmnet_map_ipv4_ul_csum_header() and rmnet_map_ipv6_ul_csum_header()
the offset within a packet at which checksumming should commence is
calculated. This calculation involves byte swapping and a forced type
conversion that makes it hard to understand.
Simplify this by computing the offset in host byte order, then
converting the result when assigning it into the header field.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 15 Mar 2021 21:51:46 +0000 (16:51 -0500)]
net: qualcomm: rmnet: mark trailer field endianness
The fields in the checksum trailer structure used for QMAP protocol
RX packets are all big-endian format, so define them that way.
It turns out these fields are never actually used by the RMNet code.
The start offset is always assumed to be zero, and the length is
taken from the other packet headers. So making these fields
explicitly big endian has no effect on the behavior of the code.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chen Yu [Tue, 1 Dec 2020 01:22:09 +0000 (09:22 +0800)]
e1000e: Remove the runtime suspend restriction on CNP+
Although there is platform issue of runtime suspend support
on CNP, it would be more flexible to let the user decide whether
to disable runtime or not because:
1. This can be done in userspace via
echo on > /sys/devices/pci0000\:00/0000\:00\:1f.d/power/control
2. More and more NICs would support runtime suspend, disabling the
runtime suspend on them by default would impact the validation.
Only disable runtime suspend on CNP in case of any user space regression.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Chen Yu [Tue, 1 Dec 2020 01:21:50 +0000 (09:21 +0800)]
e1000e: Leverage direct_complete to speed up s2ram
The NIC is put in runtime suspend status when there is no cable connected.
As a result, it is safe to keep non-wakeup NIC in runtime suspended during
s2ram because the system does not rely on the NIC plug event nor WoL to wake
up the system. Besides that, unlike the s2idle, s2ram does not need to
manipulate S0ix settings during suspend.
This patch introduces the .prepare() for e1000e so that if the NIC is runtime
suspended the subsequent suspend/resume hooks will be skipped so as to speed
up the s2ram. The pm core will check whether the NIC is a wake up device so
there's no need to check it again in .prepare(). DPM_FLAG_SMART_PREPARE flag
should be set during probe to ask the pci subsystem to honor the driver's
prepare() result. Besides, the NIC remains runtime suspended after resumed
from s2ram as there is no need to resume it.
Tested on i7-2600K with 82579V NIC
Before the patch:
e1000e 0000:00:19.0: pci_pm_suspend+0x0/0x160 returned 0 after 225146 usecs
e1000e 0000:00:19.0: pci_pm_resume+0x0/0x90 returned 0 after 140588 usecs
After the patch:
echo disabled > //sys/devices/pci0000\:00/0000\:00\:19.0/power/wakeup
becomes 0 usecs because the hooks will be skipped.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alex Elder [Mon, 15 Mar 2021 15:01:18 +0000 (10:01 -0500)]
net: ipa: make ipa_table_hash_support() inline
In review, Alexander Duyck suggested that ipa_table_hash_support()
was trivial enough that it could be implemented as a static inline
function in the header file. But the patch had already been
accepted. Implement his suggestion.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Bornyakov [Mon, 15 Mar 2021 14:19:26 +0000 (17:19 +0300)]
net: phy: add Marvell 88X2222 transceiver support
Add basic support for the Marvell 88X2222 multi-speed ethernet
transceiver.
This PHY provides data transmission over fiber-optic as well as Twinax
copper links. The 88X2222 supports 2 ports of 10GBase-R and 1000Base-X
on the line-side interface. The host-side interface supports 4 ports of
10GBase-R, RXAUI, 1000Base-X and 2 ports of XAUI.
This driver, however, supports only XAUI on the host-side and
1000Base-X/10GBase-R on the line-side, for now. The SGMII is also
supported over 1000Base-X. Interrupts are not supported.
Internal registers access compliant with the Clause 45 specification.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Mar 2021 21:46:34 +0000 (14:46 -0700)]
Merge branch 'stmmac-clocks'
Joakim Zhang says:
====================
net: stmmac: implement clocks management
This patch set tries to implement clocks management, and takes i.MX platform as an example.
---
ChangeLogs:
V1->V2:
* change to pm runtime mechanism.
* rename function: _enable() -> _config()
* take MDIO bus into account, it needs clocks when interface
is closed.
* reverse Christmass tree.
V2->V3:
* slightly simple the code according to Andrew's suggesstion
and also add tag: Reviewed-by: Andrew Lunn <andrew@lunn.ch>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang [Mon, 15 Mar 2021 12:16:48 +0000 (20:16 +0800)]
net: stmmac: dwmac-imx: add platform level clocks management for i.MX
Split clocks settings from init callback into clks_config callback,
which could support platform level clocks management.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang [Mon, 15 Mar 2021 12:16:47 +0000 (20:16 +0800)]
net: stmmac: add platform level clocks management
This patch intends to add platform level clocks management. Some
platforms may have their own special clocks, they also need to be
managed dynamically. If you want to manage such clocks, please implement
clks_config callback.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang [Mon, 15 Mar 2021 12:16:46 +0000 (20:16 +0800)]
net: stmmac: add clocks management for gmac driver
This patch intends to add clocks management for stmmac driver:
If CONFIG_PM enabled:
1. Keep clocks disabled after driver probed.
2. Enable clocks when up the net device, and disable clocks when down
the net device.
If CONFIG_PM disabled:
Keep clocks always enabled after driver probed.
Note:
1. It is fine for ethtool, since the way of implementing ethtool_ops::begin
in stmmac is only can be accessed when interface is enabled, so the clocks
are ticked.
2. The MDIO bus has a different life cycle to the MAC, need ensure
clocks are enabled when _mdio_read/write() need clocks, because these
functions can be called while the interface it not opened.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Mar 2021 19:53:12 +0000 (12:53 -0700)]
Merge branch 'net-pcs-stmmac=add-C37-AN-SGMII-support'
Ong Boon Leong says:
====================
net: pcs, stmmac: add C37 AN SGMII support
This patch series adds MAC-side SGMII support to stmmac driver and it is
changed as follow:-
1/6: Refactor the current C73 implementation in pcs-xpcs to prepare for
adding C37 AN later.
2/6: Add MAC-side SGMII C37 AN support to pcs-xpcs
3,4/6: make phylink_parse_mode() to work for non-DT platform so that
we can use stmmac platform_data to set it.
5/6: Make stmmac_open() to only skip PHY init if C73 is used, otherwise
C37 AN will need phydev to be connected to phylink.
6/6: Finally, add pcs-xpcs SGMII interface support to Intel mGbE
controller.
The patch series have been tested on EHL CRB PCH TSN (eth2) controller
that has Marvell
88E1512 PHY attached over SGMII interface and the
iterative tests of speed change (AN) + ping test have been successful.
[63446.009295] intel-eth-pci 0000:00:1e.4 eth2: Link is Down
[63449.986365] intel-eth-pci 0000:00:1e.4 eth2: Link is Up - 1Gbps/Full - flow control off
[63449.987625] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[63451.248064] intel-eth-pci 0000:00:1e.4 eth2: Link is Down
[63454.082366] intel-eth-pci 0000:00:1e.4 eth2: Link is Up - 100Mbps/Full - flow control off
[63454.083650] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[63456.465179] intel-eth-pci 0000:00:1e.4 eth2: Link is Down
[63459.202367] intel-eth-pci 0000:00:1e.4 eth2: Link is Up - 10Mbps/Full - flow control off
[63459.203639] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[63460.882832] intel-eth-pci 0000:00:1e.4 eth2: Link is Down
[63464.322366] intel-eth-pci 0000:00:1e.4 eth2: Link is Up - 1Gbps/Full - flow control off
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ong Boon Leong [Mon, 15 Mar 2021 05:27:11 +0000 (13:27 +0800)]
stmmac: intel: add pcs-xpcs for Intel mGbE controller
Intel mGbE controller such as those in EHL & TGL uses pcs-xpcs driver for
SGMII interface. To ensure mdio bus scanning does not assign phy_device
to MDIO-addressable entities like intel serdes and pcs-xpcs, we set up
to phy_mask to skip them.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ong Boon Leong [Mon, 15 Mar 2021 05:27:10 +0000 (13:27 +0800)]
net: stmmac: ensure phydev is attached to phylink for C37 AN
As the support for MAC-side SGMII C37 AN is added to pcs-xpcs, phydev
should be attached to phylink during driver's open(). So, we change the
condition to "Not C73 AN" instead.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ong Boon Leong [Mon, 15 Mar 2021 05:27:09 +0000 (13:27 +0800)]
net: stmmac: make in-band AN mode parsing is supported for non-DT
Not all platform uses DT, so phylink_parse_mode() will skip in-band setup
of pl->supported and pl->link_config.advertising entirely. So, we add the
setting of ovr_an_inband flag to make it works for non-DT platform.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ong Boon Leong [Mon, 15 Mar 2021 05:27:08 +0000 (13:27 +0800)]
net: phylink: make phylink_parse_mode() support non-DT platform
Certain platform does not support DT, so we make phylink_parse_mode() to
allow non-DT platform to use it to setup in-band AN advertising.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ong Boon Leong [Mon, 15 Mar 2021 05:27:07 +0000 (13:27 +0800)]
net: pcs: add C37 SGMII AN support for intel mGbE controller
XPCS IP supports C37 SGMII AN process and it is used in intel multi-GbE
controller as MAC-side SGMII.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ong Boon Leong [Mon, 15 Mar 2021 05:27:06 +0000 (13:27 +0800)]
net: pcs: rearrange C73 functions to prepare for C37 support later
The current implementation for XPCS is validated for C73, so we rename them
to have _c73 suffix and introduce a set of functions to use an_mode flag
to switch between C73 and C37 AN later.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhaskar Chowdhury [Mon, 15 Mar 2021 01:53:22 +0000 (07:23 +0530)]
net: ethernet: neterion: Fix a typo in the file s2io.c
s/structue/structure/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhaskar Chowdhury [Mon, 15 Mar 2021 01:48:47 +0000 (07:18 +0530)]
net: ethernet: intel: igb: Typo fix in the file igb_main.c
s/structue/structure/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhaskar Chowdhury [Sun, 14 Mar 2021 22:22:21 +0000 (03:52 +0530)]
ethernet: amazon: ena: A typo fix in the file ena_com.h
Mundane typo fix.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Dobriyan [Sun, 14 Mar 2021 15:24:02 +0000 (18:24 +0300)]
atm: delete include/linux/atm_suni.h
This file has been effectively empty since 2.3.99-pre3 !
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianlin Lv [Sun, 14 Mar 2021 14:56:29 +0000 (22:56 +0800)]
bonding: Added -ENODEV interpret for slaves option
When the incorrect interface name is stored in the slaves/active_slave
option of the bonding sysfs, the kernel does not record the log that
interface does not exist.
This patch adds a log for -ENODEV error, which will facilitate users to
figure out such issue.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sun, 14 Mar 2021 14:49:19 +0000 (15:49 +0100)]
net: export dev_set_threaded symbol
For wireless devices (e.g. mt76 driver) multiple net_devices belongs to
the same wireless phy and the napi object is registered in a dummy
netdevice related to the wireless phy.
Export dev_set_threaded in order to be reused in device drivers enabling
threaded NAPI.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Kanzenbach [Sun, 14 Mar 2021 12:52:08 +0000 (13:52 +0100)]
net: dsa: hellcreek: Offload bridge port flags
The switch implements unicast and multicast filtering per port.
Add support for it. By default filtering is disabled.
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 14 Mar 2021 22:00:44 +0000 (15:00 -0700)]
Merge branch 'psample-Add-additional-metadata-attributes'
Ido Schimmel says:
====================
psample: Add additional metadata attributes
This series extends the psample module to expose additional metadata to
user space for packets sampled via act_sample. The new metadata (e.g.,
transit delay) can then be consumed by applications such as hsflowd [1]
for better network observability.
netdevsim is extended with a dummy psample implementation that
periodically reports "sampled" packets to the psample module. In
addition to testing of the psample module, it enables the development
and demonstration of user space applications (e.g., hsflowd) that are
interested in the new metadata even without access to specialized
hardware (e.g., Spectrum ASIC) that can provide it.
mlxsw is also extended to provide the new metadata to psample.
A Wireshark dissector for psample netlink packets [2] will be submitted
upstream after the kernel patches are accepted. In addition, a libpcap
capture module for psample is currently in the works. Eventually, users
should be able to run:
# tshark -i psample
In order to consume sampled packets along with their metadata.
Series overview:
Patch #1 makes it easier to extend the metadata provided to psample
Patch #2 adds the new metadata attributes to psample
Patch #3 extends netdevsim to periodically report "sampled" packets to
psample. Various debugfs knobs are added to control the reporting
Patch #4 adds a selftest over netdevsim
Patches #5-#10 gradually add support for the new metadata in mlxsw
Patch #11 adds a selftest over mlxsw
[1] https://sflow.org/draft4_sflow_transit.txt
[2] https://gitlab.com/amitcohen1/wireshark/-/commit/
3d711143024e032aef1b056dd23f0266c54fab56
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:40 +0000 (14:19 +0200)]
selftests: mlxsw: Add tc sample tests
Test that packets are sampled when tc-sample is used and that reported
metadata is correct. Two sets of hosts (with and without LAG) are used,
since metadata extraction in mlxsw is a bit different when LAG is
involved.
# ./tc_sample.sh
TEST: tc sample rate (forward) [ OK ]
TEST: tc sample rate (local receive) [ OK ]
TEST: tc sample maximum rate [ OK ]
TEST: tc sample group conflict test [ OK ]
TEST: tc sample iif [ OK ]
TEST: tc sample lag iif [ OK ]
TEST: tc sample oif [ OK ]
TEST: tc sample lag oif [ OK ]
TEST: tc sample out-tc [ OK ]
TEST: tc sample out-tc-occ [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:39 +0000 (14:19 +0200)]
mlxsw: spectrum: Report extra metadata to psample module
Make use of the previously added metadata and report it to the psample
module. The metadata is read from the skb's control block, which was
initialized by the bus driver (i.e., 'mlxsw_pci') after decoding the
packet's Completion Queue Element (CQE).
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:38 +0000 (14:19 +0200)]
mlxsw: spectrum: Remove mlxsw_sp_sample_receive()
The function resolves the psample sampling group from the Rx port
because this is the only form of sampling the driver currently supports.
Subsequent patches are going to add support for Tx-based and
policy-based sampling, in which case the sampling group would not be
resolved from the Rx port.
Therefore, move this code to the Rx-specific sampling listener.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:37 +0000 (14:19 +0200)]
mlxsw: spectrum: Remove unnecessary RCU read-side critical section
Since commit
7d8e8f3433dc ("mlxsw: core: Increase scope of RCU read-side
critical section"), all Rx handlers are called from an RCU read-side
critical section.
Remove the unnecessary rcu_read_lock() / rcu_read_unlock().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:36 +0000 (14:19 +0200)]
mlxsw: pci: Set extra metadata in skb control block
Packets that are mirrored / sampled to the CPU have extra metadata
encoded in their corresponding Completion Queue Element (CQE). Retrieve
this metadata from the CQE and set it in the skb control block so that
it could be accessed by the switch driver (i.e., 'mlxsw_spectrum').
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:35 +0000 (14:19 +0200)]
mlxsw: Create dedicated field for Rx metadata in skb control block
Next patch will need to encode more Rx metadata in the skb control
block, so create a dedicated field for it and move the cookie index
there.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:34 +0000 (14:19 +0200)]
mlxsw: pci: Add more metadata fields to CQEv2
The Completion Queue Element version 2 (CQEv2) includes various metadata
fields for packets that are mirrored / sampled to the CPU.
Add these fields so that they could be used by a later patch.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:33 +0000 (14:19 +0200)]
selftests: netdevsim: Test psample functionality
Test various aspects of psample functionality over netdevsim and in
particular test that the psample module correctly reports the provided
metadata.
Example:
# ./psample.sh
TEST: psample enable / disable [ OK ]
TEST: psample group number [ OK ]
TEST: psample metadata [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:32 +0000 (14:19 +0200)]
netdevsim: Add dummy psample implementation
Allow netdevsim to report "sampled" packets to the psample module by
periodically generating packets from a work queue. The behavior can be
enabled / disabled (default) and the various meta data attributes can be
controlled via debugfs knobs.
This implementation enables both testing of the psample module with all
the optional attributes as well as development of user space
applications on top of psample such as hsflowd and a Wireshark dissector
for psample generic netlink packets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:31 +0000 (14:19 +0200)]
psample: Add additional metadata attributes
Extend psample to report the following attributes when available:
* Output traffic class as a 16-bit value
* Output traffic class occupancy in bytes as a 64-bit value
* End-to-end latency of the packet in nanoseconds resolution
* Software timestamp in nanoseconds resolution (always available)
* Packet's protocol. Needed for packet dissection in user space (always
available)
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Sun, 14 Mar 2021 12:19:30 +0000 (14:19 +0200)]
psample: Encapsulate packet metadata in a struct
Currently, callers of psample_sample_packet() pass three metadata
attributes: Ingress port, egress port and truncated size. Subsequent
patches are going to add more attributes (e.g., egress queue occupancy),
which also need an indication whether they are valid or not.
Encapsulate packet metadata in a struct in order to keep the number of
arguments reasonable.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 14 Mar 2021 21:48:26 +0000 (14:48 -0700)]
Merge branch 'skbuff-micro-optimize-flow-dissection'
Alexander Lobakin says:
====================
skbuff: micro-optimize flow dissection
This little number makes all of the flow dissection functions take
raw input data pointer as const (1-5) and shuffles the branches in
__skb_header_pointer() according to their hit probability.
The result is +20 Mbps per flow/core with one Flow Dissector pass
per packet. This affects RPS (with software hashing), drivers that
use eth_get_headlen() on their Rx path and so on.
From v2 [1]:
- reword some commit messages as a potential fix for NIPA;
- no functional changes.
From v1 [0]:
- rebase on top of the latest net-next. This was super-weird, but
I double-checked that the series applies with no conflicts, and
then on Patchwork it didn't;
- no other changes.
[0] https://lore.kernel.org/netdev/
20210312194538.337504-1-alobakin@pm.me
[1] https://lore.kernel.org/netdev/
20210313113645.5949-1-alobakin@pm.me
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sun, 14 Mar 2021 11:11:50 +0000 (11:11 +0000)]
skbuff: micro-optimize {,__}skb_header_pointer()
{,__}skb_header_pointer() helpers exist mainly for preventing
accesses-beyond-end of the linear data.
In the vast majorify of cases, they bail out on the first condition.
All code going after is mostly a fallback.
Mark the most common branch as 'likely' one to move it in-line.
Also, skb_copy_bits() can return negative values only when the input
arguments are invalid, e.g. offset is greater than skb->len. It can
be safely marked as 'unlikely' branch, assuming that hotpath code
provides sane input to not fail here.
These two bump the throughput with a single Flow Dissector pass on
every packet (e.g. with RPS or driver that uses eth_get_headlen())
on 20 Mbps per flow/core.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sun, 14 Mar 2021 11:11:41 +0000 (11:11 +0000)]
ethernet: constify eth_get_headlen()'s data argument
It's used only for flow dissection, which now takes constant data
pointers.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sun, 14 Mar 2021 11:11:32 +0000 (11:11 +0000)]
linux/etherdevice.h: misc trailing whitespace cleanup
Caught by the text editor. Fix it separately from the actual changes.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sun, 14 Mar 2021 11:11:23 +0000 (11:11 +0000)]
flow_dissector: constify raw input data argument
Flow Dissector code never modifies the input buffer, neither skb nor
raw data.
Make 'data' argument const for all of the Flow dissector's functions.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sun, 14 Mar 2021 11:11:14 +0000 (11:11 +0000)]
skbuff: make __skb_header_pointer()'s data argument const
The function never modifies the input buffer, so 'data' argument
can be marked as const.
This implies one harmless cast-away.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sun, 14 Mar 2021 11:11:00 +0000 (11:11 +0000)]
flow_dissector: constify bpf_flow_dissector's data pointers
BPF Flow dissection programs are read-only and don't touch input
buffers.
Mark 'data' and 'data_end' in struct bpf_flow_dissector as const
in preparation for global input constifying.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 14 Mar 2021 21:41:09 +0000 (14:41 -0700)]
Merge branch 'gro-micro-optimize-dev_gro_receive'
Alexander Lobakin says:
====================
gro: micro-optimize dev_gro_receive()
This random series addresses some of suboptimal constructions used
in the main GRO entry point.
The main body is gro_list_prepare() simplification and pointer usage
optimization in dev_gro_receive() itself. Being mostly cosmetic, it
gives like +10 Mbps on my setup to both TCP and UDP (both single- and
multi-flow).
Since v1 [0]:
- drop the replacement of bucket index calculation with
reciprocal_scale() since it makes absolutely no sense (Eric);
- improve stack usage in dev_gro_receive() (Eric);
- reverse the order of patches to avoid changes superseding.
[0] https://lore.kernel.org/netdev/
20210312162127.239795-1-alobakin@pm.me
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sat, 13 Mar 2021 20:30:14 +0000 (20:30 +0000)]
gro: give 'hash' variable in dev_gro_receive() a less confusing name
'hash' stores not the flow hash, but the index of the GRO bucket
corresponding to it.
Change its name to 'bucket' to avoid confusion while reading lines
like '__set_bit(hash, &napi->gro_bitmask)'.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sat, 13 Mar 2021 20:30:10 +0000 (20:30 +0000)]
gro: consistentify napi->gro_hash[x] access in dev_gro_receive()
GRO bucket index doesn't change through the entire function.
Store a pointer to the corresponding bucket instead of its member
and use it consistently through the function.
It is performance-safe since &gro_list->list == gro_list.
Misc: remove superfluous braces around single-line branches.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Sat, 13 Mar 2021 20:30:05 +0000 (20:30 +0000)]
gro: simplify gro_list_prepare()
gro_list_prepare() always returns &napi->gro_hash[bucket].list,
without any variations. Moreover, it uses 'napi' argument only to
have access to this list, and calculates the bucket index for the
second time (firstly it happens at the beginning of
dev_gro_receive()) to do that.
Given that dev_gro_receive() already has an index to the needed
list, just pass it as the first argument to eliminate redundant
calculations, and make gro_list_prepare() return void.
Also, both arguments of gro_list_prepare() can be constified since
this function can only modify the skbs from the bucket list.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>