OSDN Git Service
Manaf Meethalavalappu Pallikunhi [Tue, 25 Oct 2016 14:41:59 +0000 (20:11 +0530)]
ARM: dts: msm: Add BCL peripheral configs for pmfalcon
Add pmfalcon BCL peripheral related configs to enable the BCL
peripheral driver. Add configs like vbat interrupt, ibat interrupt,
vbat polling delay, ibat polling delay, etc.
Change-Id: I9d7cc82c50c1b09610f5a4eac86af4617389f23f
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Linux Build Service Account [Wed, 7 Dec 2016 05:03:17 +0000 (21:03 -0800)]
Merge "leds: qpnp-wled: Fix the APIs to read/write WLED registers"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:16 +0000 (21:03 -0800)]
Merge "thermal-core: Use rcu for accessing sensor list"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:15 +0000 (21:03 -0800)]
Merge "msm: sensor: Validationg function pointers before using them"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:14 +0000 (21:03 -0800)]
Merge "msm: camera: Notify TZ App about changes of the HW security mode"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:13 +0000 (21:03 -0800)]
Merge "msm: ipa: enable suspend pipe for ODU"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:13 +0000 (21:03 -0800)]
Merge "input: misc: add condition check for ddic reset"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:12 +0000 (21:03 -0800)]
Merge "input: ft5x06_ts: fix uninitialized references in ft5x06_ts"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:11 +0000 (21:03 -0800)]
Merge "coresight: fix 32-bit compilation issues"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:10 +0000 (21:03 -0800)]
Merge "ARM: dts: msm: Update GPUCC clock frequencies for MSMtriton"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:09 +0000 (21:03 -0800)]
Merge "Revert "wil6210: prevent XTAL off in device bootloader""
Linux Build Service Account [Wed, 7 Dec 2016 05:03:08 +0000 (21:03 -0800)]
Merge "clk: Add vdd_class support for handoff and use_max_uV"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:07 +0000 (21:03 -0800)]
Merge "ASoC: msm8998: Add support for HiFi amplifier"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:56 +0000 (14:33 -0800)]
Merge "soc: qcom: Check err_ready before returning from subsys_generic_handler()"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:56 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add BT node for QRD interposer msm8998"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:55 +0000 (14:33 -0800)]
Merge "soc: qcom: implement notify_tx_abort() callback"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:53 +0000 (14:33 -0800)]
Merge "soc: qcom: fix to avoid invalid memory access"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:52 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add the LCDB device node for PM2FALCON"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:51 +0000 (14:33 -0800)]
Merge "defconfig: msm: falcon: enable LCDB driver"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:50 +0000 (14:33 -0800)]
Merge "Revert "input: powerkey: don't send dummy release event""
Linux Build Service Account [Tue, 6 Dec 2016 22:33:49 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add device tree for msmfalcon CDP, MTP & RCM"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:48 +0000 (14:33 -0800)]
Merge "iommu: dma-mapping-fast: add support for DMA sync single APIs"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:47 +0000 (14:33 -0800)]
Merge "clk: qcom: Add additional delay while enabling votable clocks"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:46 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: set dcs commands in hs for mode switch in jdi panel"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:43 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: update micbias regulator in msmfalcon"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:42 +0000 (14:33 -0800)]
Merge "msm: camera: flash: Validate the power setting size"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:41 +0000 (14:33 -0800)]
Merge "msm: camera: sensor: Validate eeprom_name string length"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:40 +0000 (14:33 -0800)]
Merge "msm: camera: eeprom: Validate the power setting size"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:39 +0000 (14:33 -0800)]
Merge "msm: camera: sensor: Add boundary check for cci master"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:36 +0000 (14:33 -0800)]
Merge "regulator: msm_gfx_ldo: Fix the CX voting logic"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:36 +0000 (14:33 -0800)]
Merge "regulator: msm_gfx_ldo: Fix invalid memory accesses"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:35 +0000 (14:33 -0800)]
Merge "regulator: msm_gfx_ldo: Enable CPR sensors in LDO bypass mode"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:35 +0000 (14:33 -0800)]
Merge "regulator: msm_gfx_ldo: Add a property to adjust the open-loop voltage"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:34 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: add mdss dsi nodes for msm8998 v2.1 interposer"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:30 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: update resource id of SSC regulator of PM2FALCON"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:30 +0000 (14:33 -0800)]
Merge "soc: qcom: Add support to restart user PD"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:29 +0000 (14:33 -0800)]
Merge "defconfig: Enable config IP_NF_MATCH_RPFILTER"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:28 +0000 (14:33 -0800)]
Merge "clk: qcom: Add RCG support for DP pixel source"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:27 +0000 (14:33 -0800)]
Merge "msm: kgsl: Dump VBIF and few GPU registers before crash dumper"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:26 +0000 (14:33 -0800)]
Merge "mpm-of: Support multiple mpm pin mapping to same gic interrupt"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:26 +0000 (14:33 -0800)]
Merge "soc: qcom: Reduce halt acknowledgment timeout for mss axi port"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:25 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: add the smmu nodes for msmtriton"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:24 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Enable PWM, Haptics and Flash for PM2FALCON"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:23 +0000 (14:33 -0800)]
Merge "arm: dma-mapping: handle IOVA address zero"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:22 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add aggre2_snoc_axi_clk handle in msmfalcon USB3 node"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:22 +0000 (14:33 -0800)]
Merge "USB: dwc3: msm: Add support for vote/devote aggre2_snoc_axi_clk"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:21 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add GPU properties for falcon GPU"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:20 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add qrng device node for msmfalcon"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:19 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add tz-log device node for msmfalcon"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:19 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: refactor smb138x device to its own dtsi"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:16 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Enable CX Ipeak Mitigation for MSMFALCON"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:14 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Make required changes for Modem PIL for MSMFALCON Interposer"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:14 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add vmem slave bus usecase to vmem in msm8998"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:13 +0000 (14:33 -0800)]
Merge "msm: vidc: Fail qbuf and prepare_buf incase of error"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:12 +0000 (14:33 -0800)]
Merge "msm: vidc: change format specifier for size_t"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:11 +0000 (14:33 -0800)]
Merge "clk: msm: clock-osm: set SEQ_REG(32) to L_VAL of corner in LEVEL_3_UP_VC"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:11 +0000 (14:33 -0800)]
Merge "phy: qcom-ufs-qmp-v3: increase the minimum time in hibernate"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:09 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add ERP device definition on msmtriton"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:08 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add ERP device definition on msmfalcon"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:08 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add cpu cache nodes for msmtriton"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:07 +0000 (14:33 -0800)]
Merge "soc: qcom: glink: add NULL check for edge_ctx"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:04 +0000 (14:33 -0800)]
Merge "msm: camera: isp: Check reg update miss only for PIX stream"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:03 +0000 (14:33 -0800)]
Merge "msm: camera: isp: Dual camera sync feature"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:02 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Front camera config for msmfalcon interposer"
Linux Build Service Account [Tue, 6 Dec 2016 22:32:57 +0000 (14:32 -0800)]
Merge "msm: mdss: dp: fix parity byte calculation"
Skylar Chang [Fri, 18 Nov 2016 18:21:33 +0000 (10:21 -0800)]
msm: ipa: enable suspend pipe for ODU
For ODU bridge use case ODU CONS pipe should be suspend
if there is no data activity to make sure IPA clocks will be
voted on downlink traffic
Change-Id: I6625eb082d55456e0f71afa8fc6ebdba3f6024a5
CRs-Fixed:
1095287
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Alexander Kolesnikov [Tue, 6 Dec 2016 10:02:36 +0000 (12:02 +0200)]
msm: camera: Notify TZ App about changes of the HW security mode
The change adds a mechanism to send a notification down to TZ App
upon changes in the camera HW blocks security mode.
Change-Id: Iabc62e9e484717920bfec74a8799de3900a7215e
Signed-off-by: Alexander Kolesnikov <akolesni@codeaurora.org>
Taniya Das [Tue, 6 Dec 2016 10:20:08 +0000 (15:50 +0530)]
ARM: dts: msm: Update GPUCC clock frequencies for MSMtriton
Few frequencies for GPU clock node requires to be updated, so add the same.
Change-Id: Ie3e7929def7b4e77edc33297f8c30a0bcd07bcce
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Jin Fu [Mon, 5 Dec 2016 10:45:07 +0000 (18:45 +0800)]
input: misc: add condition check for ddic reset
LCD can control DDIC reset by itself, so add condition check
and allow not to define DDIC reset pin in device tree.
CRs-Fixed:
1097675
Change-ID: I802bb0ecc86349c7e0380b54811bfae776a41f49
Signed-off-by: Jin Fu <jinf@codeaurora.org>
zhenchao [Thu, 10 Nov 2016 05:28:59 +0000 (13:28 +0800)]
ARM: dts: msm: Add BT node for QRD interposer msm8998
Add bluetooth node for msm8998 interposer platform using
msmfalcon QRD. Configure bluetooth power supply based on
the QRD PMIC PMFALCON/PM2FALCON. Disable qca,wcn3990
Bluetooth node to avoid failure in bootup.
CRs-Fixed:
1088153
Change-Id: I00527f465b9251d1329ca3c783cafeafadfce8f2
Signed-off-by: zhenchao <zhenchao@codeaurora.org>
Taniya Das [Tue, 6 Dec 2016 06:01:31 +0000 (11:31 +0530)]
clk: qcom: gpucc: Update gpu clock support for msmtriton
The gpu clock frequencies are different from the current supported
frequencies, so update the same.
Change-Id: I78e3b241390f9f5c7d8600d8ce933d9ffc9845fa
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Himanshu Aggarwal [Tue, 6 Dec 2016 05:49:26 +0000 (11:19 +0530)]
input: ft5x06_ts: fix uninitialized references in ft5x06_ts
Fix uninitialized references in ft5x06_ts driver, found
during static analysis of the code.
Change-Id: I15e248dd9bb3673c21d31acea69a1e892eff51b0
Signed-off-by: Himanshu Aggarwal <haggarwa@codeaurora.org>
Taniya Das [Sat, 3 Dec 2016 13:36:59 +0000 (19:06 +0530)]
clk: Add vdd_class support for handoff and use_max_uV
Some dedicated power rails do not require a max voltage vote during bootup.
Allow clock drivers to skip handoff for the corresponding VDD classes.
Multiple vdd_class structures might share same set of regulators. If the
FMAXes for these different vdd_class structures do not have the same level
vote, there could be a conflict when setting voltage on the regulator.
Add a flag use_max_uV to vote for INT_MAX as max_uV when calling
regulator_set_voltage(). Constraints in the regulator driver make sure that
the final voltage meets the requirement of that regulator's operational
range.
Change-Id: I15c9dc3ecf907723a136cbe90597ccafeba91af0
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Liam Mark [Thu, 1 Dec 2016 21:05:31 +0000 (13:05 -0800)]
iommu: dma-mapping-fast: add support for DMA sync single APIs
Implement the fast map DMA sync single APIs.
Change-Id: I1b785c7c441e53fa0b2e0fa784ff8afed8afceb9
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Subbaraman Narayanamurthy [Fri, 2 Dec 2016 22:24:52 +0000 (14:24 -0800)]
Revert "input: powerkey: don't send dummy release event"
This reverts commit
d796ae6e8878daecf855d23658c546aeef506142
("input: powerkey: don't send dummy release event") which was
added as a workaround to ensure that keys held during resume
were not artificially released by the input framework. This
issue is already resolved by commit
768d9aa55740
("Input: don't call input_dev_release_keys() in resume").
Change-Id: I542837eddce7cb1ffba55c3e5d6b2e5bd12c9e62
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Subbaraman Narayanamurthy [Fri, 2 Dec 2016 22:15:08 +0000 (14:15 -0800)]
input: qpnp-power-on: Configure debounce delay for PON GEN2 properly
Debounce delay range and hence the bit encodings got changed in
PON GEN2 peripheral. Fix qpnp_pon_set_dbc() to configure the
debounce delay properly.
CRs-Fixed:
1097089
Change-Id: Ia3d474a04e11c7d16a1507d65e99001cf844947b
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Sudheer Papothi [Thu, 20 Oct 2016 17:11:06 +0000 (22:41 +0530)]
ASoC: msm8998: Add support for HiFi amplifier
HiFi amplifier uses lineout path and routed to headphones.
This is used for better quality of audio on headphones. Add
support to enable HiFi amplifier on msm8998.
Change-Id: I3f2cadbb74b3a68d91938f20afff2ab0ab42b4bd
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Sudheer Papothi [Fri, 4 Nov 2016 17:57:20 +0000 (23:27 +0530)]
ARM: dts: msm: Add pinctrl device nodes for HiFi amplifier on MSM8998
HiFi amplifier uses lineout path in the codec to be routed to
headphone amplifiers. This routing needs two gpios to be
toggled. Add pinctrl device nodes to control gpios for
HiFi amplifier usecase.
Change-Id: I8d34eecd562ab50a8ec89f241406092d1b763a9a
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Hamad Kadmany [Mon, 5 Dec 2016 14:20:16 +0000 (16:20 +0200)]
Revert "wil6210: prevent XTAL off in device bootloader"
This reverts commit
05f7adbb9d9d37ba39058942d87d62941c733cd1
("wil6210: prevent XTAL off in device bootloader").
Original commit was found to be causing flood of WMI MBOX
interrupts while device is being reset.
CRs-Fixed:
1097247
Change-Id: If7cee7d36230225621ea74bca8ebb0e1077b94e6
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Srinivas Ramana [Mon, 5 Dec 2016 08:14:01 +0000 (13:44 +0530)]
ARM: dts: msm: Add device tree for msmfalcon CDP, MTP & RCM
Add initial device tree support for CDP, MTP and RCM
platforms of msmfalcon.
Change-Id: I2e4591c50fe3db61ed3a4364647579bf254d0edd
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Anirudh Ghayal [Mon, 5 Dec 2016 12:43:22 +0000 (18:13 +0530)]
ARM: dts: msm: Add the LCDB device node for PM2FALCON
LCDB supports the LCD display +ve/-ve bias. Add the device
node for it.
While at it, disable the LCDB module for PM3FALCON and remove
the dummy bias regulator nodes from falcon interposer.
CRs-Fixed:
1074468
Change-Id: I0aa4736aa0f2d6c6fe3b2e0d19c41df80c0975fe
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Ashay Jaiswal [Sat, 3 Dec 2016 17:27:53 +0000 (22:57 +0530)]
defconfig: msm: falcon: enable LCDB driver
LCDB driver exoses regulators to control the positive and
negative voltage bias for the LCD display panel. It also
allows configurability for the various bias-voltage parameters.
CRs-Fixed:
1074468
Change-Id: Id3c0eccd95d5e510489ee74b3043082b7e473daa
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Anirudh Ghayal [Wed, 5 Oct 2016 09:50:41 +0000 (15:20 +0530)]
regulator: qpnp-lcdb: Add the QPNP LCDB regulator driver
QPNP LCDB regulator driver supports the LCD display
bias configuration. It exposes 2 regulators to control
the positive and negative voltage biases.
CRs-Fixed:
1074468
Change-Id: I069dc61ee4fc5d56aff2b836f06fa7246285e42a
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Ashish Garg [Mon, 5 Dec 2016 11:13:22 +0000 (16:43 +0530)]
ARM: dts: msm: add mdss dsi nodes for msm8998 v2.1 interposer
Add the power supplies to vote for max supported voltage on the
regulator for mdss dsi. Also add mdss dsi node for the msm8998
v2.1 interposer.
Change-Id: I84cae6e7816834dfce0839faa41903f2f871782d
Signed-off-by: Ashish Garg <ashigarg@codeaurora.org>
Ashwanth Goli [Mon, 28 Nov 2016 06:46:55 +0000 (12:16 +0530)]
defconfig: Enable config IP_NF_MATCH_RPFILTER
Enable config IP_NF_MATCH_RPFILTER.
This option allows you to match packets whose replies would go out via
the interface the packet came in
Change-Id: I2a23346e726a8df8487aeb664d6316b3cf2b9d77
Signed-off-by: Ashwanth Goli <ashwanth@codeaurora.org>
Rajesh Kemisetti [Thu, 1 Dec 2016 18:11:56 +0000 (23:41 +0530)]
msm: kgsl: Dump VBIF and few GPU registers before crash dumper
Triggering Crash Dumper might actually change the values of
few GPU registers including VBIF. Hence dump those registers
ahead and skip them from the list which goes to crash dumper.
Change-Id: I37a53983a65bd8abfefa780053819de71df7f24f
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Rajesh Kemisetti [Thu, 1 Dec 2016 16:19:33 +0000 (21:49 +0530)]
msm: kgsl: Add support to disable CP Crash Dumper
By default A5xx GPUs use CP crash dumper to get GPU
snapshot in case of any fault.
At times it is required to disable crash dumper
in case of any abnormalities, add support to do so.
Change-Id: Iea6497778bcd711e769f0e509103bd3bd0fd8574
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Laxminath Kasam [Tue, 29 Nov 2016 12:37:44 +0000 (18:07 +0530)]
ARM: dts: msm: update micbias regulator in msmfalcon
Power regulator pm2falcon_bob is used to supply micbias
to WCD codec. Add the supply in codec supplies list.
As external buck supply is from VPH_PWR, remove
entries of s4 rail.
Change-Id: I24791396fff9bf612985ff2073e2a74356570a35
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Avaneesh Kumar Dwivedi [Mon, 21 Nov 2016 06:38:28 +0000 (12:08 +0530)]
soc: qcom: Reduce halt acknowledgment timeout for mss axi port
Reduce halt ack timeout to 25 ms from 100 ms to reduce delay in
mss shutdown path.
Change-Id: I935e35d5d848e564aad5987b1652546046f0927d
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Taniya Das [Mon, 21 Nov 2016 06:05:12 +0000 (11:35 +0530)]
clk: qcom: Add RCG support for DP pixel source
Add a new RCG clock ops specific for the DP pixel clock source.
Change-Id: I2ec5ddcfd47af8362f76d76d153e30d4e2f45370
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Anirudh Ghayal [Thu, 27 Oct 2016 14:46:59 +0000 (20:16 +0530)]
regulator: msm_gfx_ldo: Fix the CX voting logic
Vote on the CX rail only if the gfx_ldo regulator
is enabled.
CRs-Fixed:
1078568
Change-Id: Ice3a527b9952c0fdee813d8ad152d4c1deea7ecd
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Anirudh Ghayal [Sat, 15 Oct 2016 10:09:23 +0000 (15:39 +0530)]
regulator: msm_gfx_ldo: Fix invalid memory accesses
A few gfx_ldo memory read/write calls use an invalid ldo
base address leading to other corruptions in the system.
Fix this by using the correct LDO base address.
CRs-Fixed:
1078353
Change-Id: I034d473e86b3fe7164d1c9ddad326c9dd77a188f
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Anirudh Ghayal [Thu, 26 May 2016 09:49:19 +0000 (15:19 +0530)]
regulator: msm_gfx_ldo: Enable CPR sensors in LDO bypass mode
Enable the configuration which keeps the CPR sensors active
when LDO is in auto-bypass mode. The sensors only stay
bypassed when LDO is regulating.
CRs-Fixed:
1027469
Change-Id: I6b8c2a3fd8fe22a64b6d24c458a7c60641195e45
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Anirudh Ghayal [Fri, 29 Apr 2016 09:23:44 +0000 (14:53 +0530)]
regulator: msm_gfx_ldo: Add a property to adjust the open-loop voltage
Add a DT property to adjust the open-loop voltage for the LDO
corners, this will be useful for voltage adjustments after
LDO characterization.
While at it, update the LDO MIN_VOLTAGE value for 8953.
CRs-Fixed:
1010052
Change-Id: I7479ebbf0ac7253eb355246d36f15a91ce96cd9a
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Anirudh Ghayal [Thu, 10 Mar 2016 16:13:00 +0000 (21:43 +0530)]
regulator: msm_gfx_ldo: Update the fusing scheme for GFX LDO
Change the LDO_EN bit definition for GFX LDO on MSM8953 and
remove the LDO bypass fusing logic as it is not supported.
While at it, add the debugfs node to disable ldo_mode.
Disable LDO mode: echo 1 > /d/msm_gfx_ldo/ldo_mode_disable
Enable LDO mode: echo 0 > /d/msm_gfx_ldo/ldo_mode_disable
CRs-Fixed: 989270
Change-Id: Ibc7aa921380e89da4963571408b89bc417dec245
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Tirupathi Reddy [Mon, 5 Dec 2016 04:41:26 +0000 (10:11 +0530)]
regulator: Remove internal code name of msmtitanium for msm8953
Remove all reference to internal code name msmtitanium
and replace them with msm8953, as there is an official
announcement for msm8953 SoC.
Change-Id: If99bbf20756a524c5a3bd7ba49366c29e158289e
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Anirudh Ghayal [Sat, 3 Dec 2016 16:29:27 +0000 (21:59 +0530)]
ARM: dts: msm: Enable PWM, Haptics and Flash for PM2FALCON
Enable the PWMs mapped to the RGB module and specify
the lpg-lut-size.
While at it, enable the haptics and flash node.
Change-Id: I83cf7882d1abb96c343973894c2a7ab3f932dfb1
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Maulik Shah [Fri, 4 Mar 2016 06:14:46 +0000 (11:44 +0530)]
mpm-of: Support multiple mpm pin mapping to same gic interrupt
Currently one gic interrupt is mapped to one mpm pin.
Support multiple mpm pins to get enabled with single irq
with client drivers using enable_irq_wake API.
Change-Id: Iea575079c24ed0986b74fb6e86c7b8100474f19e
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Amey Telawane [Tue, 25 Oct 2016 10:40:13 +0000 (16:10 +0530)]
coresight: fix 32-bit compilation issues
Compilation issues were observed on 32-bit as header files
were not present. Add support to resolve the issue.
Change-Id: I8071405a888cd2b23a068ca5b9c3a7808d13821a
CRs-fixed:
1089405
Signed-off-by: Amey Telawane <ameyt@codeaurora.org>
Linux Build Service Account [Sun, 4 Dec 2016 13:55:31 +0000 (05:55 -0800)]
Merge "msm: vidc: Align release buffers with V4L2 states"