OSDN Git Service
Christian Couder [Wed, 24 Oct 2007 05:01:05 +0000 (07:01 +0200)]
Bisect: refactor "bisect_write_*" functions.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Mon, 22 Oct 2007 05:48:36 +0000 (07:48 +0200)]
Bisect: implement "bisect skip" to mark untestable revisions.
When there are some "skip"ped revisions, we add the '--bisect-all'
option to "git rev-list --bisect-vars". Then we filter out the
"skip"ped revisions from the result of the rev-list command, and we
modify the "bisect_rev" var accordingly.
We don't always use "--bisect-all" because it is slower
than "--bisect-vars" or "--bisect".
When we cannot find for sure the first bad commit because of
"skip"ped commits, we print the hash of each possible first bad
commit and then we exit with code 2.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Christian Couder [Mon, 22 Oct 2007 05:48:23 +0000 (07:48 +0200)]
Bisect: fix some white spaces and empty lines breakages.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Christian Couder [Mon, 22 Oct 2007 05:48:11 +0000 (07:48 +0200)]
rev-list documentation: add "--bisect-all".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Christian Couder [Mon, 22 Oct 2007 05:47:56 +0000 (07:47 +0200)]
rev-list: implement --bisect-all
This is Junio's patch with some stuff to make --bisect-all
compatible with --bisect-vars.
This option makes it possible to see all the potential
bisection points. The best ones are displayed first.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Sat, 27 Oct 2007 06:26:49 +0000 (23:26 -0700)]
Merge branch 'ja/shorthelp'
* ja/shorthelp:
help: remove extra blank line after "See 'git --help'" message
On error, do not list all commands, but point to --help option
Junio C Hamano [Sat, 27 Oct 2007 06:26:41 +0000 (23:26 -0700)]
help: remove extra blank line after "See 'git --help'" message
The double LF were there only because we gave a list of common
commands. WIth the list gone, there is no reason to have the
extra blank line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 27 Oct 2007 06:17:23 +0000 (23:17 -0700)]
Merge branch 'maint'
* maint:
Fix generation of perl/perl.mak
git-remote: fix "Use of uninitialized value in string ne"
Christian Couder [Fri, 26 Oct 2007 04:13:50 +0000 (06:13 +0200)]
Test suite: reset TERM to its previous value after testing.
Using konsole, I get no colored output at the end of "t7005-editor.sh"
without this patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 27 Oct 2007 06:17:14 +0000 (23:17 -0700)]
Merge branch 'ph/color-test'
* ph/color-test:
Support a --quiet option in the test-suite.
Add some fancy colors in the test library when terminal supports it.
Jim Meyering [Fri, 26 Oct 2007 10:48:41 +0000 (12:48 +0200)]
hooks-pre-commit: use \t, rather than a literal TAB in regexp
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Riesen [Thu, 25 Oct 2007 20:17:24 +0000 (22:17 +0200)]
Fix generation of perl/perl.mak
The code generating perl/Makefile from Makefile.PL was causing trouble
because it didn't considered NO_PERL_MAKEMAKER and ran makemaker
unconditionally, rewriting perl.mak. Makemaker is FUBAR in ActiveState Perl,
and perl/Makefile has a replacement for it.
Besides, a changed Git.pm is *NOT* a reason to rebuild all the perl scripts,
so remove the dependency too.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Fri, 26 Oct 2007 07:59:12 +0000 (09:59 +0200)]
fast-import.c: fix regression due to strbuf conversion
Without this strbuf_detach(), it yields a double free later, the
command is in fact stashed, and this is not a memory leak.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Wed, 24 Oct 2007 20:03:39 +0000 (22:03 +0200)]
Support a --quiet option in the test-suite.
This shuts down the "* ok ##: `test description`" messages.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pierre Habouzit [Wed, 24 Oct 2007 20:03:38 +0000 (22:03 +0200)]
Add some fancy colors in the test library when terminal supports it.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 25 Oct 2007 04:59:50 +0000 (21:59 -0700)]
Merge branch 'db/fetch-pack'
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
Miklos Vajna [Mon, 1 Oct 2007 12:42:42 +0000 (14:42 +0200)]
git-send-email: add a new sendemail.to configuration variable
Some projects prefer to receive patches via a given email address.
In these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 24 Oct 2007 11:49:51 +0000 (04:49 -0700)]
git-remote: fix "Use of uninitialized value in string ne"
martin f krafft <madduck@madduck.net> writes:
> piper:~> git remote show origin
> * remote origin
> URL: ssh://git.madduck.net/~/git/etc/mailplate.git
> Use of uninitialized value in string ne at /usr/local/stow/git/bin/git-remote line 248.
This is because there might not be branch.<name>.remote defined but
the code unconditionally dereferences $branch->{$name}{'REMOTE'} and
compares with another string.
Tested-by: Martin F Krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 23 Oct 2007 19:10:55 +0000 (12:10 -0700)]
k.org git toppage: Add link to 1.5.3 release notes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jari Aalto [Sat, 20 Oct 2007 22:41:41 +0000 (01:41 +0300)]
On error, do not list all commands, but point to --help option
- Remove out call to list_common_cmds_help()
- Send error message to stderr, not stdout.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Sun, 21 Oct 2007 09:36:19 +0000 (11:36 +0200)]
git-cherry-pick: improve description of -x.
Reword the first sentence of the description of -x, in order to
make it easier to read and understand.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
René Scharfe [Sun, 21 Oct 2007 09:23:49 +0000 (11:23 +0200)]
Correct some sizeof(size_t) != sizeof(unsigned long) typing errors
Fix size_t vs. unsigned long pointer mismatch warnings introduced
with the addition of strbuf_detach().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 21 Oct 2007 04:51:09 +0000 (00:51 -0400)]
Use PRIuMAX instead of 'unsigned long long' in show-index
Elsewhere in Git we already use PRIuMAX and cast to uintmax_t when
we need to display a value that is 'very big' and we're not exactly
sure what the largest display size is for this platform.
This particular fix is needed so we can do the incredibly crazy
temporary hack of:
diff --git a/cache.h b/cache.h
index
e0abcd6..
6637fd8 100644
--- a/cache.h
+++ b/cache.h
@@ -6,6 +6,7 @@
#include SHA1_HEADER
#include <zlib.h>
+#define long long long
#if ZLIB_VERNUM < 0x1200
#define deflateBound(c,s) ((s) + (((s) + 7) >> 3) + (((s) + 63) >> 6) + 11)
allowing us to more easily look for locations where we are passing
a pointer to an 8 byte value to a function that expects a 4 byte
value. This can occur on some platforms where sizeof(long) == 8
and sizeof(size_t) == 4.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 21 Oct 2007 06:11:45 +0000 (02:11 -0400)]
Merge branch 'maint'
* maint:
Describe more 1.5.3.5 fixes in release notes
Fix diffcore-break total breakage
Fix directory scanner to correctly ignore files without d_type
Improve receive-pack error message about funny ref creation
fast-import: Fix argument order to die in file_change_m
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
gitk.txt: Fix markup.
send-pack: respect '+' on wildcard refspecs
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Avoid using bold text in entire gui for some fonts
Shawn O. Pearce [Sun, 21 Oct 2007 03:40:06 +0000 (23:40 -0400)]
Describe more 1.5.3.5 fixes in release notes
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Linus Torvalds [Sat, 20 Oct 2007 19:31:31 +0000 (12:31 -0700)]
Fix diffcore-break total breakage
Ok, so on the kernel list, some people noticed that "git log --follow"
doesn't work too well with some files in the x86 merge, because a lot of
files got renamed in very special ways.
In particular, there was a pattern of doing single commits with renames
that looked basically like
- rename "filename.h" -> "filename_64.h"
- create new "filename.c" that includes "filename_32.h" or
"filename_64.h" depending on whether we're 32-bit or 64-bit.
which was preparatory for smushing the two trees together.
Now, there's two issues here:
- "filename.c" *remained*. Yes, it was a rename, but there was a new file
created with the old name in the same commit. This was important,
because we wanted each commit to compile properly, so that it was
bisectable, so splitting the rename into one commit and the "create
helper file" into another was *not* an option.
So we need to break associations where the contents change too much.
Fine. We have the -B flag for that. When we break things up, then the
rename detection will be able to figure out whether there are better
alternatives.
- "git log --follow" didn't with with -B.
Now, the second case was really simple: we use a different "diffopt"
structure for the rename detection than the basic one (which we use for
showing the diffs). So that second case is trivially fixed by a trivial
one-liner that just copies the break_opt values from the "real" diffopts
to the one used for rename following. So now "git log -B --follow" works
fine:
diff --git a/tree-diff.c b/tree-diff.c
index
26bdbdd..
7c261fd 100644
--- a/tree-diff.c
+++ b/tree-diff.c
@@ -319,6 +319,7 @@ static void try_to_follow_renames(struct tree_desc *t1, struct tree_desc *t2, co
diff_opts.detect_rename = DIFF_DETECT_RENAME;
diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT;
diff_opts.single_follow = opt->paths[0];
+ diff_opts.break_opt = opt->break_opt;
paths[0] = NULL;
diff_tree_setup_paths(paths, &diff_opts);
if (diff_setup_done(&diff_opts) < 0)
however, the end result does *not* work. Because our diffcore-break.c
logic is totally bogus!
In particular:
- it used to do
if (base_size < MINIMUM_BREAK_SIZE)
return 0; /* we do not break too small filepair */
which basically says "don't bother to break small files". But that
"base_size" is the *smaller* of the two sizes, which means that if some
large file was rewritten into one that just includes another file, we
would look at the (small) result, and decide that it's smaller than the
break size, so it cannot be worth it to break it up! Even if the other
side was ten times bigger and looked *nothing* like the samell file!
That's clearly bogus. I replaced "base_size" with "max_size", so that
we compare the *bigger* of the filepair with the break size.
- It calculated a "merge_score", which was the score needed to merge it
back together if nothing else wanted it. But even if it was *so*
different that we would never want to merge it back, we wouldn't
consider it a break! That makes no sense. So I added
if (*merge_score_p > break_score)
return 1;
to make it clear that if we wouldn't want to merge it at the end, it
was *definitely* a break.
- It compared the whole "extent of damage", counting all inserts and
deletes, but it based this score on the "base_size", and generated the
damage score with
delta_size = src_removed + literal_added;
damage_score = delta_size * MAX_SCORE / base_size;
but that makes no sense either, since quite often, this will result in
a number that is *bigger* than MAX_SCORE! Why? Because base_size is
(again) the smaller of the two files we compare, and when you start out
from a small file and add a lot (or start out from a large file and
remove a lot), the base_size is going to be much smaller than the
damage!
Again, the fix was to replace "base_size" with "max_size", at which
point the damage actually becomes a sane percentage of the whole.
With these changes in place, not only does "git log -B --follow" work for
the case that triggered this in the first place, ie now
git log -B --follow arch/x86/kernel/vmlinux_64.lds.S
actually gives reasonable results. But I also wanted to verify it in
general, by doing a full-history
git log --stat -B -C
on my kernel tree with the old code and the new code.
There's some tweaking to be done, but generally, the new code generates
much better results wrt breaking up files (and then finding better rename
candidates). Here's a few examples of the "--stat" output:
- This:
include/asm-x86/Kbuild | 2 -
include/asm-x86/debugreg.h | 79 +++++++++++++++++++++++++++++++++++------
include/asm-x86/debugreg_32.h | 64 ---------------------------------
include/asm-x86/debugreg_64.h | 65 ---------------------------------
4 files changed, 68 insertions(+), 142 deletions(-)
Becomes:
include/asm-x86/Kbuild | 2 -
include/asm-x86/{debugreg_64.h => debugreg.h} | 9 +++-
include/asm-x86/debugreg_32.h | 64 -------------------------
3 files changed, 7 insertions(+), 68 deletions(-)
- This:
include/asm-x86/bug.h | 41 +++++++++++++++++++++++++++++++++++++++--
include/asm-x86/bug_32.h | 37 -------------------------------------
include/asm-x86/bug_64.h | 34 ----------------------------------
3 files changed, 39 insertions(+), 73 deletions(-)
Becomes
include/asm-x86/{bug_64.h => bug.h} | 20 +++++++++++++-----
include/asm-x86/bug_32.h | 37 -----------------------------------
2 files changed, 14 insertions(+), 43 deletions(-)
Now, in some other cases, it does actually turn a rename into a real
"delete+create" pair, and then the diff is usually bigger, so truth in
advertizing: it doesn't always generate a nicer diff. But for what -B was
meant for, I think this is a big improvement, and I suspect those cases
where it generates a bigger diff are tweakable.
So I think this diff fixes a real bug, but we might still want to tweak
the default values and perhaps the exact rules for when a break happens.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Linus Torvalds [Fri, 19 Oct 2007 17:59:22 +0000 (10:59 -0700)]
Fix directory scanner to correctly ignore files without d_type
On Fri, 19 Oct 2007, Todd T. Fries wrote:
> If DT_UNKNOWN exists, then we have to do a stat() of some form to
> find out the right type.
That happened in the case of a pathname that was ignored, and we did
not ask for "dir->show_ignored". That test used to be *together*
with the "DTYPE(de) != DT_DIR", but splitting the two tests up
means that we can do that (common) test before we even bother to
calculate the real dtype.
Of course, that optimization only matters for systems that don't
have, or don't fill in DTYPE properly.
I also clarified the real relationship between "exclude" and
"dir->show_ignored". It used to do
if (exclude != dir->show_ignored) {
..
which wasn't exactly obvious, because it triggers for two different
cases:
- the path is marked excluded, but we are not interested in ignored
files: ignore it
- the path is *not* excluded, but we *are* interested in ignored
files: ignore it unless it's a directory, in which case we might
have ignored files inside the directory and need to recurse
into it).
so this splits them into those two cases, since the first case
doesn't even care about the type.
I also made a the DT_UNKNOWN case a separate helper function,
and added some commentary to the cases.
Linus
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 21 Oct 2007 04:12:12 +0000 (00:12 -0400)]
Improved const correctness for strings
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 21 Oct 2007 03:41:20 +0000 (23:41 -0400)]
Merge git://git.kernel.org/pub/scm/gitk/gitk
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix "can't unset prevlines(...)" Tcl error
gitk: Avoid an error when cherry-picking if HEAD has moved on
gitk: Check that we are running on at least Tcl/Tk 8.4
gitk: Do not pick up file names of "copy from" lines
gitk: Add support for OS X mouse wheel
gitk: disable colours when calling git log
Shawn O. Pearce [Sun, 21 Oct 2007 03:19:22 +0000 (23:19 -0400)]
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Avoid using bold text in entire gui for some fonts
Paul Mackerras [Sun, 21 Oct 2007 02:58:42 +0000 (12:58 +1000)]
gitk: Fix "can't unset prevlines(...)" Tcl error
This fixes the error reported by Michele Ballabio, where gitk will
throw a Tcl error "can't unset prevlines(...)" when displaying a
commit that has a parent commit listed more than once, and the commit
is the first child of that parent.
The problem was basically that we had two variables, prevlines and
lineends, and were relying on the invariant that prevlines($id) was
set iff $id was in the lineends($r) list for some $r. But having
a duplicate parent breaks that invariant since we end up with the
parent listed twice in lineends.
This fixes it by simplifying the logic to use only a single variable,
lineend. It also rearranges things a little so that we don't try to
draw the line for the duplicated parent twice.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Shawn O. Pearce [Sat, 20 Oct 2007 20:03:49 +0000 (16:03 -0400)]
Define compat version of mkdtemp for systems lacking it
Solaris 9 doesn't have mkdtemp() so we need to emulate it for the
rsync transport implementation. Since Solaris 9 is lacking this
function we can also reasonably assume it is not available on
Solaris 8 either. The new Makfile definition NO_MKDTEMP can be
set to enable the git compat version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Sat, 20 Oct 2007 07:21:34 +0000 (08:21 +0100)]
Deduce exec_path also from calls to git with a relative path
There is already logic in the git wrapper to deduce the exec_path from
argv[0], when the git wrapper was called with an absolute path. Extend
that logic to handle relative paths as well.
For example, when you call "../../hello/world/git", it will not turn
"../../hello/world" into an absolute path, and use that.
Initial implementation by Scott R Parish.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Joakim Tjernlund [Sat, 20 Oct 2007 19:31:46 +0000 (21:31 +0200)]
Improve receive-pack error message about funny ref creation
receive-pack is only executed remotely so when
reporting errors, say so.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Julian Phillips [Sat, 20 Oct 2007 16:15:38 +0000 (17:15 +0100)]
fast-import: Fix argument order to die in file_change_m
The arguments to the "Not a blob" die call in file_change_m were
transposed, so that the command was printed as the type, and the type
as the command. Switch them around so that the error message comes
out correctly.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sun, 21 Oct 2007 00:42:01 +0000 (20:42 -0400)]
git-gui: Don't display CR within console windows
Git progress bars from tools like git-push and git-fetch use CR
to skip back to the start of the current line and redraw it with
an updated progress. We were doing this in our Tk widget but had
failed to skip the CR, which Tk doesn't draw well.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Sat, 20 Oct 2007 18:16:15 +0000 (14:16 -0400)]
git-gui: Handle progress bars from newer gits
Post Git 1.5.3 a new style progress bar has been introduced that
uses only one line rather than two. The formatting of the completed
and total section is also slightly different so we must adjust our
regexp to match. Unfortunately both styles are in active use by
different versions of Git so we need to look for both.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Chris Pettitt [Tue, 16 Oct 2007 05:15:06 +0000 (22:15 -0700)]
git-p4 support for perforce renames.
The current git-p4 implementation does support file renames. However, because
it does not use the "p4 integrate" command, the history for the renamed file is
not linked to the new file.
This changeset adds support for perforce renames with the integrate command.
Currently this feature is only enabled when calling git-p4 submit with the -M
option. This is intended to look and behave similar to the "detect renames"
feature of other git commands.
The following sequence is used for renamed files:
p4 integrate -Dt x x'
p4 edit x'
rm x'
git apply
p4 delete x
By default, perforce will not allow an integration with a target file that has
been deleted. That is, if x' in the example above is the name of a previously
deleted file then perforce will fail the integrate. The -Dt option tells
perforce to allow the target of integrate to be a previously deleted file.
Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
Simon Hausmann [Thu, 13 Sep 2007 20:10:18 +0000 (22:10 +0200)]
git-p4: When skipping a patch as part of "git-p4 submit" make sure we correctly revert to the previous state of the files using "p4 revert".
Signed-off-by: Simon Hausmann <simon@lst.de>
Paul Mackerras [Sat, 20 Oct 2007 12:10:52 +0000 (22:10 +1000)]
gitk: Avoid an error when cherry-picking if HEAD has moved on
This fixes an error reported by Adam Piątyszek: if the current HEAD
is not in the graph that gitk knows about when we do a cherry-pick
using gitk, then gitk hits an error when trying to update its
internal representation of the topology. This avoids the error by
not doing that update if the HEAD before the cherry-pick was a
commit that gitk doesn't know about.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sat, 20 Oct 2007 11:21:03 +0000 (21:21 +1000)]
gitk: Check that we are running on at least Tcl/Tk 8.4
This checks that we have Tcl/Tk 8.4 or later, and puts up an error
message in a window and quits if not.
This was prompted by a patch submitted by Steffen Prohaska, but is
done a bit differently (this uses package require rather than
looking at [info tclversion], and uses show_error to display the
error rather than printing it to stderr).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Shawn O. Pearce [Sat, 20 Oct 2007 05:42:01 +0000 (01:42 -0400)]
git-gui: Correctly report failures from git-write-tree
If git-write-tree fails (such as if the index file is currently
locked and it wants to write to it) we were not getting the error
message as $tree_id was always the empty string so we shortcut
through the catch and never got the output from stderr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Fri, 19 Oct 2007 17:24:43 +0000 (19:24 +0200)]
gitk.txt: Fix markup.
For the manpage, avoid generating an em dash in code.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt [Tue, 2 Oct 2007 14:16:54 +0000 (16:16 +0200)]
gitk: Do not pick up file names of "copy from" lines
A file copy would be detected only if the original file was modified in the
same commit. This implies that there will be a patch listed under the
original file name, and we would expect that clicking the original file
name in the file list warps the patch window to that file's patch. (If the
original file was not modified, the copy would not be detected in the first
place, the copied file would be listed as "new file", and this whole matter
would not apply.)
However, if the name of the copy is sorted after the original file's patch,
then the logic introduced by commit
d1cb298b0b (which picks up the link
information from the "copy from" line) would overwrite the link
information that is already present for the original file name, which was
parsed earlier. Hence, this patch reverts part of said commit.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jonathan del Strother [Mon, 15 Oct 2007 09:33:07 +0000 (10:33 +0100)]
gitk: Add support for OS X mouse wheel
(Väinö Järvelä supplied this patch a while ago for 1.5.2. It no longer
applied cleanly, so I'm reposting it.)
MacBook doesn't seem to recognize MouseRelease-4 and -5 events, at all.
So i added a support for the MouseWheel event, which i limited to Tcl/tk
aqua, as i couldn't test it neither on Linux or Windows. Tcl/tk needs to
be updated from the version that is shipped with OS X 10.4 Tiger, for
this patch to work.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Fri, 19 Oct 2007 09:04:00 +0000 (05:04 -0400)]
send-pack: respect '+' on wildcard refspecs
When matching source and destination refs, we were failing
to pull the 'force' parameter from wildcard refspecs (but
not explicit ones) and attach it to the ref struct.
This adds a test for explicit and wildcard refspecs; the
latter fails without this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 19 Oct 2007 04:54:59 +0000 (00:54 -0400)]
Avoid scary errors about tagged trees/blobs during git-fetch
This is the same bug as
42a32174b600f139b489341b1281fb1bfa14c252.
The warning "Object $X is a tree, not a commit" is bogus and is
not relevant here. If its not a commit we just need to make sure
we don't mark it for merge as we fill out FETCH_HEAD.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 19 Oct 2007 06:18:21 +0000 (02:18 -0400)]
Merge branch 'maint'
* maint:
Paper bag fix diff invocation in 'git stash show'
Shawn O. Pearce [Fri, 19 Oct 2007 06:18:14 +0000 (02:18 -0400)]
Paper bag fix diff invocation in 'git stash show'
In
89d750bf6fa025edeb31ad258cdd09a27a5c02fa I got a little too
aggressive with changing "git diff" to "git diff-tree". This is
shown to the user, who expects to see a full diff on their console,
and will want to see the output of their custom diff drivers (if
any) as the whole point of this call site is to show the diff to
the end-user.
Noticed by Johannes Sixt <j.sixt@viscovery.net>.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 19 Oct 2007 05:18:55 +0000 (01:18 -0400)]
Merge branch 'maint'
* maint:
Further 1.5.3.5 fixes described in release notes
Avoid invoking diff drivers during git-stash
attr: fix segfault in gitattributes parsing code
Define NI_MAXSERV if not defined by operating system
Ensure we add directories in the correct order
Avoid scary errors about tagged trees/blobs during git-fetch
Shawn O. Pearce [Fri, 19 Oct 2007 05:18:29 +0000 (01:18 -0400)]
Further 1.5.3.5 fixes described in release notes
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Fri, 19 Oct 2007 02:05:10 +0000 (22:05 -0400)]
Documentation/git-gc: improve description of --auto
This patch tries to make the description of --auto a little
more clear for new users, especially those referred by the
"git-gc --auto" notification message.
It also cleans up some grammatical errors and typos in the
original description, as well as rewording for clarity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Fri, 19 Oct 2007 02:01:11 +0000 (22:01 -0400)]
Documentation/git-gc: explain --auto in description
Now that git-gc --auto tells the user to look at the man
page, it makes sense to mention the auto behavior near the
top (since this is likely to be most users' first exposure
to git-gc).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Fri, 19 Oct 2007 01:12:11 +0000 (21:12 -0400)]
git-gc: improve wording of --auto notification
The previous message had too much of a "boy, you should
really turn off this annoying gc" flair to it. Instead,
let's make sure the user understands what is happening, that
they can run it themselves, and where to find more info.
Suggested by Brian Gernhardt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 19 Oct 2007 01:28:43 +0000 (21:28 -0400)]
Avoid invoking diff drivers during git-stash
git-stash needs to restrict itself to plumbing when running automated
diffs as part of its operation as the user may have configured a
custom diff driver that opens an interactive UI for certain/all
files. Doing that during scripted actions is very unfriendly to
the end-user and may cause git-stash to fail to work.
Reported by Johannes Sixt
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Steffen Prohaska [Thu, 18 Oct 2007 20:02:35 +0000 (22:02 +0200)]
attr: fix segfault in gitattributes parsing code
git may segfault if gitattributes contains an invalid
entry. A test is added to t0020 that triggers the segfault.
The parsing code is fixed to avoid the crash.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Patrick Welche [Thu, 18 Oct 2007 17:17:39 +0000 (18:17 +0100)]
Define NI_MAXSERV if not defined by operating system
I found I needed NI_MAXSERV as it is defined in netdb.h, which is
not included by daemon.c. Rather than including the whole header
we can define a reasonable fallback value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Alex Bennee [Thu, 18 Oct 2007 16:15:44 +0000 (17:15 +0100)]
Ensure we add directories in the correct order
CVS gets understandably upset if you try and add a subdirectory
before it's parent directory. This patch fixes that.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Linus Torvalds [Thu, 18 Oct 2007 23:24:47 +0000 (16:24 -0700)]
Avoid scary errors about tagged trees/blobs during git-fetch
Ok, what is going on is:
- append_fetch_head() looks up the SHA1 for all heads (including tags):
if (get_sha1(head, sha1))
return error("Not a valid object name: %s", head);
- it then wants to check if it's a candidate for merging (because
fetching also does the whole "list which heads to merge" in case
it is going to be part of a "pull"):
commit = lookup_commit_reference(sha1);
if (!commit)
not_for_merge = 1;
- and that "lookup_commit_reference()" is just very vocal about the
case where it fails. It really shouldn't be, and it shouldn't
affect the actual end result, but that basically explains why
you get that scary warning.
In short, the warning is just bogus, and should be harmless, but
I agree that it's ugly. I think the appended patch should fix it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Thu, 18 Oct 2007 07:45:05 +0000 (03:45 -0400)]
Merge branch 'jc/am-quiet'
* jc/am-quiet:
git-am: fix typo in the previous one.
git-am: make the output quieter.
Shawn O. Pearce [Thu, 18 Oct 2007 07:11:17 +0000 (03:11 -0400)]
Merge branch 'maint'
* maint:
Yet more 1.5.3.5 fixes mentioned in release notes
cvsserver: Use exit 1 instead of die when req_Root fails.
git-blame shouldn't crash if run in an unmerged tree
git-config: print error message if the config file cannot be read
fixing output of non-fast-forward output of post-receive-email
Shawn O. Pearce [Thu, 18 Oct 2007 07:11:03 +0000 (03:11 -0400)]
Yet more 1.5.3.5 fixes mentioned in release notes
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Brian Gernhardt [Wed, 17 Oct 2007 14:05:47 +0000 (10:05 -0400)]
cvsserver: Use exit 1 instead of die when req_Root fails.
This was causing test failures because die was exiting 255.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Linus Torvalds [Thu, 18 Oct 2007 06:31:30 +0000 (02:31 -0400)]
git-blame shouldn't crash if run in an unmerged tree
If we are in the middle of resolving a merge conflict there may be
one or more files whose entries in the index represent an unmerged
state (index entries in the higher-order stages).
Attempting to run git-blame on any file in such a working directory
resulted in "fatal: internal error: ce_mode is 0" as we use the magic
marker for an unmerged entry is 0 (set up by things like diff-lib.c's
do_diff_cache() and builtin-read-tree.c's read_tree_unmerged())
and the ce_match_stat_basic() function gets upset about this.
I'm not entirely sure that the whole "ce_mode = 0" case is a good
idea to begin with, and maybe the right thing to do is to remove
that horrid freakish special case, but removing the internal error
seems to be the simplest fix for now.
Linus
[sp: Thanks to Björn Steinbrink for the test case]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Marius Storm-Olsen [Wed, 17 Oct 2007 10:57:47 +0000 (12:57 +0200)]
Teach core.autocrlf to 'git blame'
Pass the fake commit through convert_to_git, so that the
file is adjusted for local line-ending convention.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Gerrit Pape [Fri, 12 Oct 2007 11:40:57 +0000 (11:40 +0000)]
git-config: print error message if the config file cannot be read
Instead of simply exiting with 255, print an error message including
the reason why a config file specified through --file cannot be opened
or read.
The problem was noticed by Joey Hess, reported through
http://bugs.debian.org/445208
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Thu, 18 Oct 2007 05:30:19 +0000 (01:30 -0400)]
Merge branch 'lt/diff-rename'
* lt/diff-rename:
optimize diffcore-delta by sorting hash entries.
koreth@midwinter.com [Thu, 18 Oct 2007 04:41:43 +0000 (21:41 -0700)]
Add a message explaining that automatic GC is about to start
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Robert Schiele [Wed, 17 Oct 2007 22:27:51 +0000 (00:27 +0200)]
fixing output of non-fast-forward output of post-receive-email
post-receive-email has one place where the variable fast_forward is not
spelled correctly. At the same place the logic was reversed. The
combination of both bugs made the script work correctly for fast-forward
commits but not for non-fast-forward ones. This change fixes this to
be correct in both cases.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sam Vilain [Tue, 16 Oct 2007 22:33:04 +0000 (11:33 +1300)]
gitk: disable colours when calling git log
If the user specifies 'diff.color = 1' in their configuration file,
then gitk will not start. Disable colours when calling git log.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:52 +0000 (16:36 +0200)]
git-svn: simplify the handling of fatal errors
* git-svn.perl (&fatal): Append the newline at the end of the error
message.
Adjust all callers.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:51 +0000 (16:36 +0200)]
git-svn: add git svn proplist
This allows one to easily retrieve a list of svn properties from within
git-svn without requiring svn or knowing the URL of a repository.
* git-svn.perl (%cmd): Add the command `proplist'.
(&cmd_proplist): New.
* t/t9101-git-svn-props.sh: Test git svn proplist.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:50 +0000 (16:36 +0200)]
git-svn: add git svn propget
This allows one to easily retrieve a single SVN property from within
git-svn without requiring svn or remembering the URL of a repository
* git-svn.perl (%cmd): Add the new command `propget'.
($cmd_dir_prefix): New global.
(&get_svnprops): New helper.
(&cmd_propget): New. Use &get_svnprops.
* t/t9101-git-svn-props.sh: Add a test case for propget.
[ew: make sure the rev-parse --show-prefix call doesn't break
the `git-svn clone' command]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:49 +0000 (16:36 +0200)]
git-svn: implement git svn create-ignore
git svn create-ignore (to create one .gitignore per directory
from the svn:ignore properties. This has the disadvantage of
committing the .gitignore during the next dcommit, but when you
import a repo with tons of ignores (>1000), using git svn show-ignore
to build .git/info/exclude is *not* a good idea, because things like
git-status will end up doing >1000 fnmatch *per file* in the repo,
which leads to git-status taking more than 4s on my Core2Duo 2Ghz 2G
RAM)
* git-svn.perl (%cmd): Add the new command `create-ignore'.
(&cmd_create_ignore): New.
* t/t9101-git-svn-props.sh: Adjust the test-case for show-ignore and
add a test case for create-ignore.
[ew: added commit message from
<
05CAB148-56ED-4FF1-8AAB-
4BA2A0B70C2C@lrde.epita.fr> ]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Benoit Sigoure [Tue, 16 Oct 2007 14:36:48 +0000 (16:36 +0200)]
git-svn: add a generic tree traversal to fetch SVN properties
* git-svn.perl (&traverse_ignore): Remove.
(&prop_walk): New.
(&cmd_show_ignore): Use prop_walk.
[ew: This will ease the implementation of the `create-ignore',
`propget', and `proplist' commands]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Luke Lu [Wed, 17 Oct 2007 03:45:25 +0000 (20:45 -0700)]
gitweb: speed up project listing on large work trees by limiting find depth
Signed-off-by: Luke Lu <git@vicaya.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 17 Oct 2007 03:32:03 +0000 (23:32 -0400)]
Merge branch 'maint'
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
Shawn O. Pearce [Wed, 17 Oct 2007 03:31:58 +0000 (23:31 -0400)]
Document additional 1.5.3.5 fixes in release notes
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael Witten [Tue, 16 Oct 2007 08:08:14 +0000 (04:08 -0400)]
git-cvsexportcommit.perl: git-apply no longer needs --binary
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 17 Oct 2007 01:33:11 +0000 (21:33 -0400)]
Avoid 'expr index' on Mac OS X as it isn't supported
This fixes git-instaweb so it can start an httpd without warning
about an invalid test command. Yes its ugly, but its also quite
portable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Wed, 17 Oct 2007 02:23:10 +0000 (03:23 +0100)]
filter-branch: update current branch when rewritten
Earlier, "git filter-branch --<options> HEAD" would not update the
working tree after rewriting the branch. This commit fixes it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Wed, 17 Oct 2007 02:22:25 +0000 (03:22 +0100)]
fix filter-branch documentation
The man page for filter-branch still talked about writing the result
to the branch "newbranch". This is hopefully the last place where the
old behaviour was described.
Noticed by Bill Lear.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Andrew Clausen [Tue, 16 Oct 2007 21:16:05 +0000 (17:16 -0400)]
helpful error message when send-pack finds no refs in common.
Signed-off-by: Andrew Clausen <clausen@econ.upenn.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Eygene Ryabinkin [Mon, 15 Oct 2007 07:19:12 +0000 (11:19 +0400)]
git-svn: use "no warnings 'once'" to disable false-positives
Some variables coming from the Subversion's Perl bindings are used
in our code only once, so the interpreter warns us about it. These
warnings are false-positives, because the variables themselves are
initialized in the binding's guts, that are made by SWIG.
Credits to Sam Vilain for his note about "no warnings 'once'".
[ew: minor formatting change]
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Tue, 16 Oct 2007 23:37:36 +0000 (00:37 +0100)]
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
There are a few programs, such as config and diff, which allow running
without a git repository. Therefore, they have to call
setup_git_directory_gently().
However, when GIT_DIR and GIT_WORK_TREE were set, and the current
directory was a subdirectory of the work tree,
setup_git_directory_gently() would return a bogus NULL prefix.
This patch fixes that.
Noticed by REPLeffect on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 17 Oct 2007 00:09:21 +0000 (20:09 -0400)]
Correct typos in release notes for 1.5.3.5
Noticed by Michele Ballabio.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Thu, 11 Oct 2007 00:47:55 +0000 (01:47 +0100)]
fetch: if not fetching from default remote, ignore default merge
When doing "git fetch <remote>" on a remote that does not have the
branch referenced in branch.<current-branch>.merge, git fetch failed.
It failed because it tried to add the "merge" ref to the refs to be
fetched.
Fix that. And add a test case.
Incidentally, this unconvered a bug in our own test suite, where
"git pull <some-path>" was expected to merge the ref given in the
defaults, even if not pulling from the default remote.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Schindelin [Mon, 15 Oct 2007 22:32:45 +0000 (23:32 +0100)]
cvsexportcommit: get rid of temporary directory
Since commit
e86ad71fe5f53ae4434566bd09ea4256090e5a3a we do not use
a temporary directory in cvsexportcommit. So there is no need to set
one up.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Jeff King [Mon, 15 Oct 2007 04:47:30 +0000 (00:47 -0400)]
git-rebase: document suppression of duplicate commits
git-rebase uses format-patch's --ignore-if-in-upstream
option, but we never document the user-visible behavior. The
example is placed near the top of the example list rather
than at the bottom because it is:
a. a simple example
b. a reasonably common scenario for many projects (mail
some patches which get accepted upstream, then rebase)
[sp: Corrected direction of 'HEAD..<upstream>' set comparsion]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael Olson [Mon, 15 Oct 2007 17:51:30 +0000 (13:51 -0400)]
Documentation/git-tag.txt: Document how to backdate tags
Added a new section beneath "On Automatic following" called "On
Backdating Tags". This includes an explanation of when to use this
method, a brief explanation of the kind of date that can be used in
GIT_AUTHOR_DATE, and an example invocation of git-tag using a custom
setting of GIT_AUTHOR_DATE.
[sp: Corrected s/you/your/, noticed by Jeff King]
Signed-off-by: Michael W. Olson <mwolson@gnu.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Michael W. Olson [Mon, 15 Oct 2007 17:48:27 +0000 (13:48 -0400)]
git-rebase--interactive.sh: Quote arguments to test
If /bin/sh is /bin/dash, then the script will display an error if
$parent_sha1 is undefined. This patch works fixes the issue by
quoting both arguments to `test'. Arguments composed solely of
variable expansions should always be quoted, unless we know for
certain that the contents are defined.
Signed-off-by: Michael W. Olson <mwolson@gnu.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 16 Oct 2007 04:35:22 +0000 (00:35 -0400)]
Support 'push --dry-run' for http transport
If the end-user requested a dry-run push we need to pass that flag
over to http-push and additionally make sure it does not actually
upload any changes to the remote server.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 16 Oct 2007 04:28:32 +0000 (00:28 -0400)]
Support 'push --dry-run' for rsync transport
If the end-user requested a dry-run push we should pass that flag
though to rsync so that the rsync command can show what it would do
(or not do) if push was to be executed without the --dry-run flag.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 16 Oct 2007 04:25:34 +0000 (00:25 -0400)]
Fix 'push --all branch...' error handling
The builtin-fetch topic changed push's handling of --all to setting
the new TRANSPORT_PUSH_ALL flag before starting the push subroutine
for the given transport. Unfortunately not all references within
builtin-push were changed to test this flag therefore allowing push
to incorrectly accept refspecs and --all.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 16 Oct 2007 04:15:25 +0000 (00:15 -0400)]
Merge branch 'master' into db/fetch-pack
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
Shawn O. Pearce [Tue, 16 Oct 2007 02:31:47 +0000 (22:31 -0400)]
Merge branch 'maint'
* maint:
Whip post 1.5.3.4 maintenance series into shape.
rebase -i: use diff plumbing instead of porcelain
Do not remove distributed configure script
git-archive: document --exec
git-reflog: document --verbose
git-config: handle --file option with relative pathname properly
clear_commit_marks(): avoid deep recursion
git add -i: Remove unused variables
git add -i: Fix parsing of abbreviated hunk headers
git-config: don't silently ignore options after --list
Clean up "git log" format with DIFF_FORMAT_NO_OUTPUT
Fix embarrassing "git log --follow" bug
Conflicts:
RelNotes
git-rebase--interactive.sh
Shawn O. Pearce [Tue, 16 Oct 2007 02:29:50 +0000 (22:29 -0400)]
Whip post 1.5.3.4 maintenance series into shape.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Josh England [Tue, 9 Oct 2007 16:04:42 +0000 (10:04 -0600)]
Minor usage update in setgitperms.perl
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Tue, 9 Oct 2007 21:03:55 +0000 (23:03 +0200)]
manual: use 'URL' instead of 'url'.
Just for consistency, use the spelling URL everywhere.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Ralf Wildenhues [Tue, 9 Oct 2007 21:03:11 +0000 (23:03 +0200)]
manual: add some markup.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>