OSDN Git Service
Linus Torvalds [Thu, 9 Feb 2017 21:22:54 +0000 (13:22 -0800)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"This target series for v4.10 contains fixes which address a few
long-standing bugs that DATERA's QA + automation teams have uncovered
while putting v4.1.y target code into production usage.
We've been running the top three in our nightly automated regression
runs for the last two months, and the COMPARE_AND_WRITE fix Mr. Gary
Guo has been manually verifying against a four node ESX cluster this
past week.
Note all of them have CC' stable tags.
Summary:
- Fix a bug with ESX EXTENDED_COPY + SAM_STAT_RESERVATION_CONFLICT
status, where target_core_xcopy.c logic was incorrectly returning
SAM_STAT_CHECK_CONDITION for all non SAM_STAT_GOOD cases (Nixon
Vincent)
- Fix a TMR LUN_RESET hung task bug while other in-flight TMRs are
being aborted, before the new one had been dispatched into tmr_wq
(Rob Millner)
- Fix a long standing double free OOPs, where a dynamically generated
'demo-mode' NodeACL has multiple sessions associated with it, and
the /sys/kernel/config/target/$FABRIC/$WWN/ subsequently disables
demo-mode, but never converts the dynamic ACL into a explicit ACL
(Rob Millner)
- Fix a long standing reference leak with ESX VAAI COMPARE_AND_WRITE
when the second phase WRITE COMMIT command fails, resulting in
CHECK_CONDITION response never being sent and se_cmd->cmd_kref
never reaching zero (Gary Guo)
Beyond these items on v4.1.y we've reproduced, fixed, and run through
our regression test suite using iscsi-target exports, there are two
additional outstanding list items:
- Remove a >= v4.2 RCU conversion BUG_ON that would trigger when
dynamic node NodeACLs where being converted to explicit NodeACLs.
The patch drops the BUG_ON to follow how pre RCU conversion worked
for this special case (Benjamin Estrabaud)
- Add ibmvscsis target_core_fabric_ops->max_data_sg_nent assignment
to match what IBM's Virtual SCSI hypervisor is already enforcing at
transport layer. (Bryant Ly + Steven Royer)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
ibmvscsis: Add SGL limit
target: Fix COMPARE_AND_WRITE ref leak for non GOOD status
target: Fix multi-session dynamic se_node_acl double free OOPs
target: Fix early transport_generic_handle_tmr abort scenario
target: Use correct SCSI status during EXTENDED_COPY exception
target: Don't BUG_ON during NodeACL dynamic -> explicit conversion
Linus Torvalds [Thu, 9 Feb 2017 20:25:42 +0000 (12:25 -0800)]
Merge tag 'pstore-v4.10-rc8' of git://git./linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"Fix pstore regression (boot Oops) when ftrace disabled, from Brian
Norris"
* tag 'pstore-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: don't OOPS when there are no ftrace zones
Linus Torvalds [Thu, 9 Feb 2017 19:58:05 +0000 (11:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A fix for a crash in uinput, and a fix for build errors when HID-RMI
is built-in but SERIO is a module"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - select 'SERIO' when needed
Input: uinput - fix crash when mixing old and new init style
Brian Norris [Thu, 9 Feb 2017 06:44:44 +0000 (22:44 -0800)]
pstore: don't OOPS when there are no ftrace zones
We'll OOPS in ramoops_get_next_prz() if the platform didn't ask for any
ftrace zones (i.e., cxt->fprzs will be NULL). Let's just skip this
entire FTRACE section if there's no 'fprzs'.
Regression seen on a coreboot/depthcharge-based Chromebook.
Fixes:
2fbea82bbb89 ("pstore: Merge per-CPU ftrace records into one")
Cc: Joel Fernandes <joelaf@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Linus Torvalds [Thu, 9 Feb 2017 19:34:15 +0000 (11:34 -0800)]
Merge tag 'vfio-v4.10-final' of git://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
"Fix regression in attaching groups to existing container for SPAPR
IOMMU backend (Alexey Kardashevskiy)"
* tag 'vfio-v4.10-final' of git://github.com/awilliam/linux-vfio:
vfio/spapr_tce: Set window when adding additional groups to container
Linus Torvalds [Thu, 9 Feb 2017 19:30:56 +0000 (11:30 -0800)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"A couple more fixes for 4.10:
- fix addressing the short regset write issue (Dave Martin)
- fix for LPAE systems which leave a pending imprecise data abort
before entering the kernel (Alexander Sverdlin)"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write
ARM: 8642/1: LPAE: catch pending imprecise abort on unmask
Linus Torvalds [Thu, 9 Feb 2017 02:08:29 +0000 (18:08 -0800)]
Revert "x86/ioapic: Restore IO-APIC irq_chip retrigger callback"
This reverts commit
020eb3daaba2857b32c4cf4c82f503d6a00a67de.
Gabriel C reports that it causes his machine to not boot, and we haven't
tracked down the reason for it yet. Since the bug it fixes has been
around for a longish time, we're better off reverting the fix for now.
Gabriel says:
"It hangs early and freezes with a lot RCU warnings.
I bisected it down to :
> Ruslan Ruslichenko (1):
> x86/ioapic: Restore IO-APIC irq_chip retrigger callback
Reverting this one fixes the problem for me..
The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed"
and Ruslan and Thomas are currently stumped.
Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com>
Cc: Ruslan Ruslichenko <rruslich@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # for the backport of the original commit
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Daney [Wed, 8 Feb 2017 00:23:31 +0000 (16:23 -0800)]
Revert "hwrng: core - zeroize buffers with random data"
This reverts commit
2cc751545854d7bd7eedf4d7e377bb52e176cd07.
With this commit in place I get on a Cavium ThunderX (arm64) system:
$ if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-bad.txt
1+0 records in
1+0 records out
256 bytes (256 B) copied, 9.1171e-05 s, 2.8 MB/s
$ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-bad.txt
1+0 records in
1+0 records out
256 bytes (256 B) copied, 9.6141e-05 s, 2.7 MB/s
$ cat rng-bad.txt
000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000050 00 00 00 00 37 20 46 ae d0 fc 1c 55 25 6e b0 b8
000060 7c 7e d7 d4 00 0f 6f b2 91 1e 30 a8 fa 3e 52 0e
000070 06 2d 53 30 be a1 20 0f aa 56 6e 0e 44 6e f4 35
000080 b7 6a fe d2 52 70 7e 58 56 02 41 ea d1 9c 6a 6a
000090 d1 bd d8 4c da 35 45 ef 89 55 fc 59 d5 cd 57 ba
0000a0 4e 3e 02 1c 12 76 43 37 23 e1 9f 7a 9f 9e 99 24
0000b0 47 b2 de e3 79 85 f6 55 7e ad 76 13 4f a0 b5 41
0000c0 c6 92 42 01 d9 12 de 8f b4 7b 6e ae d7 24 fc 65
0000d0 4d af 0a aa 36 d9 17 8d 0e 8b 7a 3b b6 5f 96 47
0000e0 46 f7 d8 ce 0b e8 3e c6 13 a6 2c b6 d6 cc 17 26
0000f0 e3 c3 17 8e 9e 45 56 1e 41 ef 29 1a a8 65 c8 3a
000100
000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000050 00 00 00 00 f4 90 65 aa 8b f2 5e 31 01 53 b4 d4
000060 06 c0 23 a2 99 3d 01 e4 b0 c1 b1 55 0f 80 63 cf
000070 33 24 d8 3a 1d 5e cd 2c ba c0 d0 18 6f bc 97 46
000080 1e 19 51 b1 90 15 af 80 5e d1 08 0d eb b0 6c ab
000090 6a b4 fe 62 37 c5 e1 ee 93 c3 58 78 91 2a d5 23
0000a0 63 50 eb 1f 3b 84 35 18 cf b2 a4 b8 46 69 9e cf
0000b0 0c 95 af 03 51 45 a8 42 f1 64 c9 55 fc 69 76 63
0000c0 98 9d 82 fa 76 85 24 da 80 07 29 fe 4e 76 0c 61
0000d0 ff 23 94 4f c8 5c ce 0b 50 e8 31 bc 9d ce f4 ca
0000e0 be ca 28 da e6 fa cc 64 1c ec a8 41 db fe 42 bd
0000f0 a0 e2 4b 32 b4 52 ba 03 70 8e c1 8e d0 50 3a c6
000100
To my untrained mental entropy detector, the first several bytes of
each read from /dev/hwrng seem to not be very random (i.e. all zero).
When I revert the patch (apply this patch), I get back to what we have
in v4.9, which looks like (much more random appearing):
$ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-good.txt
1+0 records in
1+0 records out
256 bytes (256 B) copied, 0.
000252233 s, 1.0 MB/s
$ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-good.txt
1+0 records in
1+0 records out
256 bytes (256 B) copied, 0.
000113571 s, 2.3 MB/s
$ cat rng-good.txt
000000 75 d1 2d 19 68 1f d2 26 a1 49 22 61 66 e8 09 e5
000010 e0 4e 10 d0 1a 2c 45 5d 59 04 79 8e e2 b7 2c 2e
000020 e8 ad da 34 d5 56 51 3d 58 29 c7 7a 8e ed 22 67
000030 f9 25 b9 fb c6 b7 9c 35 1f 84 21 35 c1 1d 48 34
000040 45 7c f6 f1 57 63 1a 88 38 e8 81 f0 a9 63 ad 0e
000050 be 5d 3e 74 2e 4e cb 36 c2 01 a8 14 e1 38 e1 bb
000060 23 79 09 56 77 19 ff 98 e8 44 f3 27 eb 6e 0a cb
000070 c9 36 e3 2a 96 13 07 a0 90 3f 3b bd 1d 04 1d 67
000080 be 33 14 f8 02 c2 a4 02 ab 8b 5b 74 86 17 f0 5e
000090 a1 d7 aa ef a6 21 7b 93 d1 85 86 eb 4e 8c d0 4c
0000a0 56 ac e4 45 27 44 84 9f 71 db 36 b9 f7 47 d7 b3
0000b0 f2 9c 62 41 a3 46 2b 5b e3 80 63 a4 35 b5 3c f4
0000c0 bc 1e 3a ad e4 59 4a 98 6c e8 8d ff 1b 16 f8 52
0000d0 05 5c 2f 52 2a 0f 45 5b 51 fb 93 97 a4 49 4f 06
0000e0 f3 a0 d1 1e ba 3d ed a7 60 8f bb 84 2c 21 94 2d
0000f0 b3 66 a6 61 1e 58 30 24 85 f8 c8 18 c3 77 00 22
000100
000000 73 ca cc a1 d9 bb 21 8d c3 5c f3 ab 43 6d a7 a4
000010 4a fd c5 f4 9c ba 4a 0f b1 2e 19 15 4e 84 26 e0
000020 67 c9 f2 52 4d 65 1f 81 b7 8b 6d 2b 56 7b 99 75
000030 2e cd d0 db 08 0c 4b df f3 83 c6 83 00 2e 2b b8
000040 0f af 61 1d f2 02 35 74 b5 a4 6f 28 f3 a1 09 12
000050 f2 53 b5 d2 da 45 01 e5 12 d6 46 f8 0b db ed 51
000060 7b f4 0d 54 e0 63 ea 22 e2 1d d0 d6 d0 e7 7e e0
000070 93 91 fb 87 95 43 41 28 de 3d 8b a3 a8 8f c4 9e
000080 30 95 12 7a b2 27 28 ff 37 04 2e 09 7c dd 7c 12
000090 e1 50 60 fb 6d 5f a8 65 14 40 89 e3 4c d2 87 8f
0000a0 34 76 7e 66 7a 8e 6b a3 fc cf 38 52 2e f9 26 f0
0000b0 98 63 15 06 34 99 b2 88 4f aa d8 14 88 71 f1 81
0000c0 be 51 11 2b f4 7e a0 1e 12 b2 44 2e f6 8d 84 ea
0000d0 63 82 2b 66 b3 9a fd 08 73 5a c2 cc ab 5a af b1
0000e0 88 e3 a6 80 4b fc db ed 71 e0 ae c0 0a a4 8c 35
0000f0 eb 89 f9 8a 4b 52 59 6f 09 7c 01 3f 56 e7 c7 bf
000100
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 9 Feb 2017 00:06:10 +0000 (16:06 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"4 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/slub.c: fix random_seq offset destruction
cpumask: use nr_cpumask_bits for parsing functions
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
kernel/ucount.c: mark user_header with kmemleak_ignore()
Sean Rees [Wed, 8 Feb 2017 22:30:59 +0000 (14:30 -0800)]
mm/slub.c: fix random_seq offset destruction
Commit
210e7a43fa90 ("mm: SLUB freelist randomization") broke USB hub
initialisation as described in
https://bugzilla.kernel.org/show_bug.cgi?id=177551.
Bail out early from init_cache_random_seq if s->random_seq is already
initialised. This prevents destroying the previously computed
random_seq offsets later in the function.
If the offsets are destroyed, then shuffle_freelist will truncate
page->freelist to just the first object (orphaning the rest).
Fixes:
210e7a43fa90 ("mm: SLUB freelist randomization")
Link: http://lkml.kernel.org/r/20170207140707.20824-1-sean@erifax.org
Signed-off-by: Sean Rees <sean@erifax.org>
Reported-by: <userwithuid@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Wed, 8 Feb 2017 22:30:56 +0000 (14:30 -0800)]
cpumask: use nr_cpumask_bits for parsing functions
Commit
513e3d2d11c9 ("cpumask: always use nr_cpu_ids in formatting and
parsing functions") converted both cpumask printing and parsing
functions to use nr_cpu_ids instead of nr_cpumask_bits. While this was
okay for the printing functions as it just picked one of the two output
formats that we were alternating between depending on a kernel config,
doing the same for parsing wasn't okay.
nr_cpumask_bits can be either nr_cpu_ids or NR_CPUS. We can always use
nr_cpu_ids but that is a variable while NR_CPUS is a constant, so it can
be more efficient to use NR_CPUS when we can get away with it.
Converting the printing functions to nr_cpu_ids makes sense because it
affects how the masks get presented to userspace and doesn't break
anything; however, using nr_cpu_ids for parsing functions can
incorrectly leave the higher bits uninitialized while reading in these
masks from userland. As all testing and comparison functions use
nr_cpumask_bits which can be larger than nr_cpu_ids, the parsed cpumasks
can erroneously yield false negative results.
This made the taskstats interface incorrectly return -EINVAL even when
the inputs were correct.
Fix it by restoring the parse functions to use nr_cpumask_bits instead
of nr_cpu_ids.
Link: http://lkml.kernel.org/r/20170206182442.GB31078@htj.duckdns.org
Fixes:
513e3d2d11c9 ("cpumask: always use nr_cpu_ids in formatting and parsing functions")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Martin Steigerwald <martin.steigerwald@teamix.de>
Debugged-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 8 Feb 2017 22:30:53 +0000 (14:30 -0800)]
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.
Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.
Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis R. Rodriguez [Wed, 8 Feb 2017 22:30:50 +0000 (14:30 -0800)]
kernel/ucount.c: mark user_header with kmemleak_ignore()
The user_header gets caught by kmemleak with the following splat as
missing a free:
unreferenced object 0xffff99667a733d80 (size 96):
comm "swapper/0", pid 1, jiffies
4294892317 (age 62191.468s)
hex dump (first 32 bytes):
a0 b6 92 b4 ff ff ff ff 00 00 00 00 01 00 00 00 ................
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
kmemleak_alloc+0x4a/0xa0
__kmalloc+0x144/0x260
__register_sysctl_table+0x54/0x5e0
register_sysctl+0x1b/0x20
user_namespace_sysctl_init+0x17/0x34
do_one_initcall+0x52/0x1a0
kernel_init_freeable+0x173/0x200
kernel_init+0xe/0x100
ret_from_fork+0x2c/0x40
The BUG_ON()s are intended to crash so no need to clean up after
ourselves on error there. This is also a kernel/ subsys_init() we don't
need a respective exit call here as this is never modular, so just white
list it.
Link: http://lkml.kernel.org/r/20170203211404.31458-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 8 Feb 2017 20:23:49 +0000 (12:23 -0800)]
Merge tag 'pci-v4.10-fixes-3' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- check MSI affinity vs. number of vectors to avoid memory corruption
- drop runtime power management for PCIe hotplug ports for now to avoid
regressing hotplug via sysfs
* tag 'pci-v4.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: pciehp: Add runtime PM support for PCIe hotplug ports"
PCI/MSI: Don't apply affinity if there aren't enough vectors left
Bryant G. Ly [Mon, 6 Feb 2017 16:04:28 +0000 (10:04 -0600)]
ibmvscsis: Add SGL limit
This patch adds internal LIO sgl limit since the driver already
sets a max transfer limit on transport layer of 1MB to the client.
Cc: stable@vger.kernel.org
Tested-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Wed, 8 Feb 2017 18:01:39 +0000 (10:01 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
- A relatively large patch restores booting on i.MX platforms that
failed to boot after a cleanup was merged for v4.10.
- A quirk for USB needs to be enabled on the STi platform
- On the Meson platform, we saw memory corruption with part of the
memory used by the secure monitor, so we have to stay out of that
area.
- The same platform also has a problem with ethernet under load, which
is fixed by disabling EEE negotiation.
- imx6dl has an incorrect pin configuration, which prevents SPI from
working.
- Two maintainers have lost their access to their email addresses, so
we should update the MAINTAINERS file before the release
- Renaming one of the orion5x linkstation models to help simplify the
debian install.
- A couple of fixes for build warnings that were introduced during
v4.10-rc.
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in
MAINTAINERS: socfpga: update email for Dinh Nguyen
ARM: orion5x: fix Makefile for linkstation-lschl.dtb
ARM: dts: orion5x-lschl: More consistent naming on linkstation series
ARM: dts: orion5x-lschl: Fix model name
MAINTAINERS: change email address from atmel to microchip
MAINTAINERS: at91: change email address
ARM64: dts: meson-gx: Add firmware reserved memory zones
ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage
ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk
ARM: dts: imx: Pass 'chosen' and 'memory' nodes
ARM: dts: imx6dl: fix GPIO4 range
ARM: imx: hide unused variable in #ifdef
Linus Torvalds [Wed, 8 Feb 2017 17:59:45 +0000 (09:59 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull selinux fix from James Morris:
"Fix off-by-one in setprocattr"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: fix off-by-one in setprocattr
Linus Torvalds [Wed, 8 Feb 2017 17:56:15 +0000 (09:56 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"A single fix that should go into 4.10, fixing a regression on some
devices with the WRITE_SAME command"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: don't try Write Same from __blkdev_issue_zeroout
Nicholas Bellinger [Mon, 6 Feb 2017 22:28:09 +0000 (14:28 -0800)]
target: Fix COMPARE_AND_WRITE ref leak for non GOOD status
This patch addresses a long standing bug where the commit phase
of COMPARE_AND_WRITE would result in a se_cmd->cmd_kref reference
leak if se_cmd->scsi_status returned non SAM_STAT_GOOD.
This would manifest first as a lost SCSI response, and eventual
hung task during fabric driver logout or re-login, as existing
shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref
to reach zero.
To address this bug, compare_and_write_post() has been changed
to drop the incorrect !cmd->scsi_status conditional that was
preventing *post_ret = 1 for being set during non SAM_STAT_GOOD
status.
This patch has been tested with SAM_STAT_CHECK_CONDITION status
from normal target_complete_cmd() callback path, as well as the
incoming __target_execute_cmd() submission failure path when
se_cmd->execute_cmd() returns non zero status.
Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Tested-by: Gary Guo <ghg@datera.io>
Cc: Gary Guo <ghg@datera.io>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Wed, 7 Dec 2016 20:55:54 +0000 (12:55 -0800)]
target: Fix multi-session dynamic se_node_acl double free OOPs
This patch addresses a long-standing bug with multi-session
(eg: iscsi-target + iser-target) se_node_acl dynamic free
withini transport_deregister_session().
This bug is caused when a storage endpoint is configured with
demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1)
initiators, and initiator login creates a new dynamic node acl
and attaches two sessions to it.
After that, demo-mode for the storage instance is disabled via
configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and
the existing dynamic acl is never converted to an explicit ACL.
The end result is dynamic acl resources are released twice when
the sessions are shutdown in transport_deregister_session().
If the storage instance is not changed to disable demo-mode,
or the dynamic acl is converted to an explict ACL, or there
is only a single session associated with the dynamic ACL,
the bug is not triggered.
To address this big, move the release of dynamic se_node_acl
memory into target_complete_nacl() so it's only freed once
when se_node_acl->acl_kref reaches zero.
(Drop unnecessary list_del_init usage - HCH)
Reported-by: Rob Millner <rlm@daterainc.com>
Tested-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Wed, 7 Dec 2016 06:45:46 +0000 (22:45 -0800)]
target: Fix early transport_generic_handle_tmr abort scenario
This patch fixes a bug where incoming task management requests
can be explicitly aborted during an active LUN_RESET, but who's
struct work_struct are canceled in-flight before execution.
This occurs when core_tmr_drain_tmr_list() invokes cancel_work_sync()
for the incoming se_tmr_req->task_cmd->work, resulting in cmd->work
for target_tmr_work() never getting invoked and the aborted TMR
waiting indefinately within transport_wait_for_tasks().
To address this case, perform a CMD_T_ABORTED check early in
transport_generic_handle_tmr(), and invoke the normal path via
transport_cmd_check_stop_to_fabric() to complete any TMR kthreads
blocked waiting for CMD_T_STOP in transport_wait_for_tasks().
Also, move the TRANSPORT_ISTATE_PROCESSING assignment earlier
into transport_generic_handle_tmr() so the existing check in
core_tmr_drain_tmr_list() avoids attempting abort the incoming
se_tmr_req->task_cmd->work if it has already been queued into
se_device->tmr_wq.
Reported-by: Rob Millner <rlm@daterainc.com>
Tested-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Mon, 31 Oct 2016 07:54:40 +0000 (00:54 -0700)]
target: Use correct SCSI status during EXTENDED_COPY exception
This patch adds the missing target_complete_cmd() SCSI status
parameter change in target_xcopy_do_work(), that was originally
missing in commit
926317de33.
It correctly propigates up the correct SCSI status during
EXTENDED_COPY exception cases, instead of always using the
hardcoded SAM_STAT_CHECK_CONDITION from original code.
This is required for ESX host environments that expect to
hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios,
and SAM_STAT_CHECK_CONDITION results in non-retriable
status for these cases.
Reported-by: Nixon Vincent <nixon.vincent@calsoftinc.com>
Tested-by: Nixon Vincent <nixon.vincent@calsoftinc.com>
Cc: Nixon Vincent <nixon.vincent@calsoftinc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Sun, 23 Oct 2016 21:28:15 +0000 (14:28 -0700)]
target: Don't BUG_ON during NodeACL dynamic -> explicit conversion
After the v4.2+ RCU conversion to se_node_acl->lun_entry_hlist,
a BUG_ON() was added in core_enable_device_list_for_node() to
detect when the located orig->se_lun_acl contains an existing
se_lun_acl pointer reference.
However, this scenario can happen when a dynamically generated
NodeACL is being converted to an explicit NodeACL, when the
explicit NodeACL contains a different LUN mapping than the
default provided by the WWN endpoint.
So instead of triggering BUG_ON(), go ahead and fail instead
following the original pre RCU conversion logic.
Reported-by: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com>
Cc: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Stephen Smalley [Tue, 31 Jan 2017 16:54:04 +0000 (11:54 -0500)]
selinux: fix off-by-one in setprocattr
SELinux tries to support setting/clearing of /proc/pid/attr attributes
from the shell by ignoring terminating newlines and treating an
attribute value that begins with a NUL or newline as an attempt to
clear the attribute. However, the test for clearing attributes has
always been wrong; it has an off-by-one error, and this could further
lead to reading past the end of the allocated buffer since commit
bb646cdb12e75d82258c2f2e7746d5952d3e321a ("proc_pid_attr_write():
switch to memdup_user()"). Fix the off-by-one error.
Even with this fix, setting and clearing /proc/pid/attr attributes
from the shell is not straightforward since the interface does not
support multiple write() calls (so shells that write the value and
newline separately will set and then immediately clear the attribute,
requiring use of echo -n to set the attribute), whereas trying to use
echo -n "" to clear the attribute causes the shell to skip the
write() call altogether since POSIX says that a zero-length write
causes no side effects. Thus, one must use echo -n to set and echo
without -n to clear, as in the following example:
$ echo -n unconfined_u:object_r:user_home_t:s0 > /proc/$$/attr/fscreate
$ cat /proc/$$/attr/fscreate
unconfined_u:object_r:user_home_t:s0
$ echo "" > /proc/$$/attr/fscreate
$ cat /proc/$$/attr/fscreate
Note the use of /proc/$$ rather than /proc/self, as otherwise
the cat command will read its own attribute value, not that of the shell.
There are no users of this facility to my knowledge; possibly we
should just get rid of it.
UPDATE: Upon further investigation it appears that a local process
with the process:setfscreate permission can cause a kernel panic as a
result of this bug. This patch fixes CVE-2017-2618.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: added the update about CVE-2017-2618 to the commit description]
Cc: stable@vger.kernel.org # 3.5: d6ea83ec6864e
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Arnd Bergmann [Tue, 7 Feb 2017 17:59:21 +0000 (09:59 -0800)]
Input: synaptics-rmi4 - select 'SERIO' when needed
With CONFIG_SERIO=m, we get a build error for the rmi4-f03 driver,
added in linux-4.10:
warning: (HID_RMI) selects RMI4_F03 which has unmet direct dependencies (!UML && INPUT && RMI4_CORE && (SERIO=y || RMI4_CORE=SERIO))
drivers/input/built-in.o: In function `rmi_f03_attention':
rmi_f03.c:(.text+0xcfe0): undefined reference to `serio_interrupt'
rmi_f03.c:(.text+0xd055): undefined reference to `serio_interrupt'
drivers/input/built-in.o: In function `rmi_f03_remove':
rmi_f03.c:(.text+0xd115): undefined reference to `serio_unregister_port'
drivers/input/built-in.o: In function `rmi_f03_probe':
rmi_f03.c:(.text+0xd209): undefined reference to `__serio_register_port'
An earlier patch tried to fix this, but missed the HID_RMI driver that
does a 'select' on the F03 backend.
This adds a hidden Kconfig symbol that enforces 'serio' to be enabled
when RMI4-F03 is, which covers all cases.
Fixes:
d7ddad0acc4a ("Input: synaptics-rmi4 - fix F03 build error when serio is module")
Fixes:
c5e8848fc98e ("Input: synaptics-rmi4 - add support for F03")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Tue, 7 Feb 2017 20:10:57 +0000 (12:10 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Load correct firmware in rtl8192ce wireless driver, from Jurij
Smakov.
2) Fix leak of tx_ring and tx_cq due to overwriting in mlx4 driver,
from Martin KaFai Lau.
3) Need to reference count PHY driver module when it is attached, from
Mao Wenan.
4) Don't do zero length vzalloc() in ethtool register dump, from
Stanislaw Gruszka.
5) Defer net_disable_timestamp() to a workqueue to get out of locking
issues, from Eric Dumazet.
6) We cannot drop the SKB dst when IP options refer to them, fix also
from Eric Dumazet.
7) Incorrect packet header offset calculations in ip6_gre, again from
Eric Dumazet.
8) Missing tcp_v6_restore_cb() causes use-after-free, from Eric too.
9) tcp_splice_read() can get into an infinite loop with URG, and hey
it's from Eric once more.
10) vnet_hdr_sz can change asynchronously, so read it once during
decision making in macvtap and tun, from Willem de Bruijn.
11) Can't use kernel stack for DMA transfers in USB networking drivers,
from Ben Hutchings.
12) Handle csum errors properly in UDP by calling the proper destructor,
from Eric Dumazet.
13) For non-deterministic softirq run when scheduling NAPI from a
workqueue in mlx4, from Benjamin Poirier.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits)
sctp: check af before verify address in sctp_addr_id2transport
sctp: avoid BUG_ON on sctp_wait_for_sndbuf
mlx4: Invoke softirqs after napi_reschedule
udp: properly cope with csum errors
catc: Use heap buffer for memory size test
catc: Combine failure cleanup code in catc_probe()
rtl8150: Use heap buffers for all register access
pegasus: Use heap buffers for all register access
macvtap: read vnet_hdr_size once
tun: read vnet_hdr_sz once
tcp: avoid infinite loop in tcp_splice_read()
hns: avoid stack overflow with CONFIG_KASAN
ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches
ipv6: tcp: add a missing tcp_v6_restore_cb()
nl80211: Fix mesh HT operation check
mac80211: Fix adding of mesh vendor IEs
mac80211: Allocate a sync skcipher explicitly for FILS AEAD
mac80211: Fix FILS AEAD protection in Association Request frame
ip6_gre: fix ip6gre_err() invalid reads
netlabel: out of bound access in cipso_v4_validate()
...
Hugh Dickins [Tue, 7 Feb 2017 19:11:16 +0000 (11:11 -0800)]
mm: fix KPF_SWAPCACHE in /proc/kpageflags
Commit
6326fec1122c ("mm: Use owner_priv bit for PageSwapCache, valid
when PageSwapBacked") aliased PG_swapcache to PG_owner_priv_1 (and
depending on PageSwapBacked being true).
As a result, the KPF_SWAPCACHE bit in '/proc/kpageflags' should now be
synthesized, instead of being shown on unrelated pages which just happen
to have PG_owner_priv_1 set.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xin Long [Tue, 7 Feb 2017 12:56:08 +0000 (20:56 +0800)]
sctp: check af before verify address in sctp_addr_id2transport
Commit
6f29a1306131 ("sctp: sctp_addr_id2transport should verify the
addr before looking up assoc") invoked sctp_verify_addr to verify the
addr.
But it didn't check af variable beforehand, once users pass an address
with family = 0 through sockopt, sctp_get_af_specific will return NULL
and NULL pointer dereference will be caused by af->sockaddr_len.
This patch is to fix it by returning NULL if af variable is NULL.
Fixes:
6f29a1306131 ("sctp: sctp_addr_id2transport should verify the addr before looking up assoc")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kardashevskiy [Tue, 7 Feb 2017 06:26:57 +0000 (17:26 +1100)]
vfio/spapr_tce: Set window when adding additional groups to container
If a container already has a group attached, attaching a new group
should just program already created IOMMU tables to the hardware via
the iommu_table_group_ops::set_window() callback.
However commit
6f01cc692a16 ("vfio/spapr: Add a helper to create
default DMA window") did not just simplify the code but also removed
the set_window() calls in the case of attaching groups to a container
which already has tables so it broke VFIO PCI hotplug.
This reverts set_window() bits in tce_iommu_take_ownership_ddw().
Fixes:
6f01cc692a16 ("vfio/spapr: Add a helper to create default DMA window")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Vineet Gupta [Tue, 7 Feb 2017 17:44:58 +0000 (09:44 -0800)]
ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixup
Reported-by: Jo-Philipp Wich <jo@mein.io>
Fixes:
9aed02feae57bf7 ("ARC: [arcompact] handle unaligned access delay slot")
Cc: linux-kernel@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marcelo Ricardo Leitner [Mon, 6 Feb 2017 20:10:31 +0000 (18:10 -0200)]
sctp: avoid BUG_ON on sctp_wait_for_sndbuf
Alexander Popov reported that an application may trigger a BUG_ON in
sctp_wait_for_sndbuf if the socket tx buffer is full, a thread is
waiting on it to queue more data and meanwhile another thread peels off
the association being used by the first thread.
This patch replaces the BUG_ON call with a proper error handling. It
will return -EPIPE to the original sendmsg call, similarly to what would
have been done if the association wasn't found in the first place.
Acked-by: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Mon, 6 Feb 2017 18:14:31 +0000 (10:14 -0800)]
mlx4: Invoke softirqs after napi_reschedule
mlx4 may schedule napi from a workqueue. Afterwards, softirqs are not run
in a deterministic time frame and the following message may be logged:
NOHZ: local_softirq_pending 08
The problem is the same as what was described in commit
ec13ee80145c
("virtio_net: invoke softirqs after __napi_schedule") and this patch
applies the same fix to mlx4.
Fixes:
07841f9d94c1 ("net/mlx4_en: Schedule napi when RX buffers allocation fails")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 5 Feb 2017 17:25:24 +0000 (09:25 -0800)]
udp: properly cope with csum errors
Dmitry reported that UDP sockets being destroyed would trigger the
WARN_ON(atomic_read(&sk->sk_rmem_alloc)); in inet_sock_destruct()
It turns out we do not properly destroy skb(s) that have wrong UDP
checksum.
Thanks again to syzkaller team.
Fixes :
7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 7 Feb 2017 15:07:03 +0000 (10:07 -0500)]
Merge branch 'net-Fix-on-stack-USB-buffers'
Ben Hutchings says:
====================
net: Fix on-stack USB buffers
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default). This
series fixes all the instances I could find where USB networking
drivers do that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Sat, 4 Feb 2017 16:57:04 +0000 (16:57 +0000)]
catc: Use heap buffer for memory size test
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Sat, 4 Feb 2017 16:56:56 +0000 (16:56 +0000)]
catc: Combine failure cleanup code in catc_probe()
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Sat, 4 Feb 2017 16:56:32 +0000 (16:56 +0000)]
rtl8150: Use heap buffers for all register access
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Sat, 4 Feb 2017 16:56:03 +0000 (16:56 +0000)]
pegasus: Use heap buffers for all register access
Allocating USB buffers on the stack is not portable, and no longer
works on x86_64 (with VMAP_STACK enabled as per default).
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
References: https://bugs.debian.org/852556
Reported-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org>
Tested-by: Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 7 Feb 2017 03:41:27 +0000 (22:41 -0500)]
Merge branch 'read-vnet_hdr_sz-once'
Willem de Bruijn says:
====================
read vnet_hdr_sz once
Tuntap devices allow concurrent use and update of field vnet_hdr_sz.
Read the field once to avoid TOCTOU.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Fri, 3 Feb 2017 23:20:49 +0000 (18:20 -0500)]
macvtap: read vnet_hdr_size once
When IFF_VNET_HDR is enabled, a virtio_net header must precede data.
Data length is verified to be greater than or equal to expected header
length tun->vnet_hdr_sz before copying.
Macvtap functions read the value once, but unless READ_ONCE is used,
the compiler may ignore this and read multiple times. Enforce a single
read and locally cached value to avoid updates between test and use.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Fri, 3 Feb 2017 23:20:48 +0000 (18:20 -0500)]
tun: read vnet_hdr_sz once
When IFF_VNET_HDR is enabled, a virtio_net header must precede data.
Data length is verified to be greater than or equal to expected header
length tun->vnet_hdr_sz before copying.
Read this value once and cache locally, as it can be updated between
the test and use (TOCTOU).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
CC: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 3 Feb 2017 22:59:38 +0000 (14:59 -0800)]
tcp: avoid infinite loop in tcp_splice_read()
Splicing from TCP socket is vulnerable when a packet with URG flag is
received and stored into receive queue.
__tcp_splice_read() returns 0, and sk_wait_data() immediately
returns since there is the problematic skb in queue.
This is a nice way to burn cpu (aka infinite loop) and trigger
soft lockups.
Again, this gem was found by syzkaller tool.
Fixes:
9c55e01c0cc8 ("[TCP]: Splice receive support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 7 Feb 2017 03:36:04 +0000 (19:36 -0800)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"None of these are showstoppers for 4.10 and could wait for 4.11 merge
window, but they are low enough risk for this late in the cycle and
the fixes have waiting users . They have received a build success
notification from the 0day robot, pass the latest ndctl unit tests,
and appeared in next:
- Fix a crash that can result when SIGINT is sent to a process that
is awaiting completion of an address range scrub command. We were
not properly cleaning up the workqueue after
wait_event_interruptible().
- Fix a memory hotplug failure condition that results from not
reserving enough space out of persistent memory for the memmap. By
default we align to 2M allocations that the memory hotplug code
assumes, but if the administrator specifies a non-default
4K-alignment then we can fail to correctly size the reservation.
- A one line fix to improve the predictability of libnvdimm block
device names. A common operation is to reconfigure /dev/pmem0 into
a different mode. For example, a reconfiguration might set a new
mode that reserves some of the capacity for a struct page memmap
array. It surprises users if the device name changes to
"/dev/pmem0.1" after the mode change and then back to /dev/pmem0
after a reboot.
- Add 'const' to some function pointer tables"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, pfn: fix memmap reservation size versus 4K alignment
acpi, nfit: fix acpi_nfit_flush_probe() crash
libnvdimm, namespace: do not delete namespace-id 0
nvdimm: constify device_type structures
Linus Torvalds [Mon, 6 Feb 2017 23:11:04 +0000 (15:11 -0800)]
Merge tag 'pm-4.10-rc8' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These add a quirk to intel_pstate to work around a firmware setting
that leads to frequency scaling issues (discovered recently) on some
Intel Kaby Lake processors, fix up the recently added brcmstb-avs
cpufreq driver and avoid false-positive warnings from the runtime PM
framework triggered by recent changes in i915.
Specifics:
- Add an intel_pstate driver quirk to work around a firmware setting
that leads to frequency scaling issues on desktop Intel Kaby Lake
processors in some configurations if the hardware-managed P-states
(HWP) feature is in use (Srinivas Pandruvada)
- Fix up the recently added brcmstb-avs cpufreq driver: fix a bug
related to system suspend and change the sysfs interface to match
the user space expectations (Markus Mayer)
- Modify the runtime PM framework to avoid false-positive warnings
from the might_sleep_if() assertions in it (Rafael Wysocki)"
* tag 'pm-4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / runtime: Avoid false-positive warnings from might_sleep_if()
cpufreq: intel_pstate: Disable energy efficiency optimization
cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend
cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap
Linus Torvalds [Mon, 6 Feb 2017 22:42:34 +0000 (14:42 -0800)]
Merge tag 'dm-4.10-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a fix for a race in .request_fn request-based DM request handling vs
DM device destruction
- an RCU fix for dm-crypt's kernel keyring support that was included in
4.10-rc1
- a -Wbool-operation warning fix for DM multipath
* tag 'dm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: replace RCU read-side section with rwsem
dm rq: cope with DM device destruction while in dm_old_request_fn()
dm mpath: cleanup -Wbool-operation warning in choose_pgpath()
Linus Torvalds [Mon, 6 Feb 2017 22:37:55 +0000 (14:37 -0800)]
Merge tag 'media/v4.10-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A few documentation fixes at CEC (with got promoted from staging for
4.10), and one fix on its core."
* tag 'media/v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cec: fix wrong last_la determination
[media] cec-intro.rst: mention the v4l-utils package and CEC utilities
[media] cec rst: remove "This API is not yet finalized" notice
Linus Torvalds [Mon, 6 Feb 2017 22:16:23 +0000 (14:16 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- use-after-free in algif_aead
- modular aesni regression when pcbc is modular but absent
- bug causing IO page faults in ccp
- double list add in ccp
- NULL pointer dereference in qat (two patches)
- panic in chcr
- NULL pointer dereference in chcr
- out-of-bound access in chcr
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: chcr - Fix key length for RFC4106
crypto: algif_aead - Fix kernel panic on list_del
crypto: aesni - Fix failure when pcbc module is absent
crypto: ccp - Fix double add when creating new DMA command
crypto: ccp - Fix DMA operations when IOMMU is enabled
crypto: chcr - Check device is allocated before use
crypto: chcr - Fix panic on dma_unmap_sg
crypto: qat - zero esram only for DH85x devices
crypto: qat - fix bar discovery for c62x
Arnd Bergmann [Fri, 3 Feb 2017 16:35:46 +0000 (17:35 +0100)]
hns: avoid stack overflow with CONFIG_KASAN
The use of ACCESS_ONCE() looks like a micro-optimization to force gcc to use
an indexed load for the register address, but it has an absolutely detrimental
effect on builds with gcc-5 and CONFIG_KASAN=y, leading to a very likely
kernel stack overflow aside from very complex object code:
hisilicon/hns/hns_dsaf_gmac.c: In function 'hns_gmac_update_stats':
hisilicon/hns/hns_dsaf_gmac.c:419:1: error: the frame size of 2912 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_ppe.c: In function 'hns_ppe_reset_common':
hisilicon/hns/hns_dsaf_ppe.c:390:1: error: the frame size of 1184 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_ppe.c: In function 'hns_ppe_get_regs':
hisilicon/hns/hns_dsaf_ppe.c:621:1: error: the frame size of 3632 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_rcb.c: In function 'hns_rcb_get_common_regs':
hisilicon/hns/hns_dsaf_rcb.c:970:1: error: the frame size of 2784 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_gmac.c: In function 'hns_gmac_get_regs':
hisilicon/hns/hns_dsaf_gmac.c:641:1: error: the frame size of 5728 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_rcb.c: In function 'hns_rcb_get_ring_regs':
hisilicon/hns/hns_dsaf_rcb.c:1021:1: error: the frame size of 2208 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_comm_init':
hisilicon/hns/hns_dsaf_main.c:1209:1: error: the frame size of 1904 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_xgmac.c: In function 'hns_xgmac_get_regs':
hisilicon/hns/hns_dsaf_xgmac.c:748:1: error: the frame size of 4704 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_update_stats':
hisilicon/hns/hns_dsaf_main.c:2420:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_regs':
hisilicon/hns/hns_dsaf_main.c:2753:1: error: the frame size of 10768 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This does not seem to happen any more with gcc-7, but removing the ACCESS_ONCE
seems safe anyway and it avoids a serious issue for some people. I have verified
that with gcc-5.3.1, the object code we get is better in the new version
both with and without CONFIG_KASAN, as we no longer allocate a 1344 byte
stack frame for hns_dsaf_get_regs() but otherwise have practically identical
object code.
With gcc-7.0.0, removing ACCESS_ONCE has no effect, the object code is already
good either way.
This patch is probably not urgent to get into 4.11 as only KASAN=y builds
with certain compilers are affected, but I still think it makes sense to
backport into older kernels.
Cc: stable@vger.kernel.org
Fixes:
511e6bc ("net: add Hisilicon Network Subsystem DSAF support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Fri, 3 Feb 2017 07:11:03 +0000 (08:11 +0100)]
ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches
When for instance a mobile Linux device roams from one access point to
another with both APs sharing the same broadcast domain and a
multicast snooping switch in between:
1) (c) <~~~> (AP1) <--[SSW]--> (AP2)
2) (AP1) <--[SSW]--> (AP2) <~~~> (c)
Then currently IPv6 multicast packets will get lost for (c) until an
MLD Querier sends its next query message. The packet loss occurs
because upon roaming the Linux host so far stayed silent regarding
MLD and the snooping switch will therefore be unaware of the
multicast topology change for a while.
This patch fixes this by always resending MLD reports when an interface
change happens, for instance from NO-CARRIER to CARRIER state.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Fri, 3 Feb 2017 08:58:24 +0000 (09:58 +0100)]
ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in
The symbols can no longer be used as loadable modules, leading to a harmless Kconfig
warning:
arch/arm/configs/imote2_defconfig:60:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/arm/configs/imote2_defconfig:59:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
arch/arm/configs/ezx_defconfig:68:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE
arch/arm/configs/ezx_defconfig:67:warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP
Let's make them built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Christoph Hellwig [Sun, 5 Feb 2017 17:10:35 +0000 (18:10 +0100)]
block: don't try Write Same from __blkdev_issue_zeroout
Write Same can return an error asynchronously if it turns out the
underlying SCSI device does not support Write Same, which makes a
proper fallback to other methods in __blkdev_issue_zeroout impossible.
Thus only issue a Write Same from blkdev_issue_zeroout an don't try it
at all from __blkdev_issue_zeroout as a non-invasive workaround.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com>
Fixes:
e73c23ff ("block: add async variant of blkdev_issue_zeroout")
Tested-by: Junichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Arnd Bergmann [Mon, 6 Feb 2017 16:33:51 +0000 (17:33 +0100)]
Merge tag 'mvebu-fixes-4.10-1' of git://git.infradead.org/linux-mvebu into fixes
Pull "mvebu fixes for 4.10 (part 1)" from Gregory CLEMENT:
More consistent naming for some orion5x based boards helping the
switch to device tree for debian users.
* tag 'mvebu-fixes-4.10-1' of git://git.infradead.org/linux-mvebu:
ARM: orion5x: fix Makefile for linkstation-lschl.dtb
ARM: dts: orion5x-lschl: More consistent naming on linkstation series
ARM: dts: orion5x-lschl: Fix model name
Dinh Nguyen [Fri, 3 Feb 2017 15:29:07 +0000 (09:29 -0600)]
MAINTAINERS: socfpga: update email for Dinh Nguyen
My opensource.altera.com email will be going away soon.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
David S. Miller [Mon, 6 Feb 2017 16:20:48 +0000 (11:20 -0500)]
Merge tag 'wireless-drivers-for-davem-2017-02-06' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.10
Only one important fix for rtlwifi which fixes a regression introduced
in 4.9 and which caused problems for many users.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 6 Feb 2017 15:55:08 +0000 (10:55 -0500)]
Merge tag 'mac80211-for-davem-2017-02-06' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A few simple fixes:
* fix FILS AEAD cipher usage to use the correct AAD vectors
and to use synchronous algorithms
* fix using mesh HT operation data from userspace
* fix adding mesh vendor elements to beacons & plink frames
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 6 Feb 2017 04:23:22 +0000 (20:23 -0800)]
ipv6: tcp: add a missing tcp_v6_restore_cb()
Dmitry reported use-after-free in ip6_datagram_recv_specific_ctl()
A similar bug was fixed in commit
8ce48623f0cf ("ipv6: tcp: restore
IP6CB for pktoptions skbs"), but I missed another spot.
tcp_v6_syn_recv_sock() can indeed set np->pktoptions from ireq->pktopts
Fixes:
971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafael J. Wysocki [Mon, 6 Feb 2017 13:52:10 +0000 (14:52 +0100)]
Merge branches 'pm-core-fixes' and 'pm-cpufreq-fixes'
* pm-core-fixes:
PM / runtime: Avoid false-positive warnings from might_sleep_if()
* pm-cpufreq-fixes:
cpufreq: intel_pstate: Disable energy efficiency optimization
cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend
cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap
Masashi Honma [Wed, 25 Jan 2017 23:56:13 +0000 (08:56 +0900)]
nl80211: Fix mesh HT operation check
A previous change to fix checks for NL80211_MESHCONF_HT_OPMODE
missed setting the flag when replacing FILL_IN_MESH_PARAM_IF_SET
with checking codes. This results in dropping the received HT
operation value when called by nl80211_update_mesh_config(). Fix
this by setting the flag properly.
Fixes:
9757235f451c ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value")
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
[rewrite commit message to use Fixes: line]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Thorsten Horstmann [Fri, 3 Feb 2017 13:38:29 +0000 (14:38 +0100)]
mac80211: Fix adding of mesh vendor IEs
The function ieee80211_ie_split_vendor doesn't return 0 on errors. Instead
it returns any offset < ielen when WLAN_EID_VENDOR_SPECIFIC is found. The
return value in mesh_add_vendor_ies must therefore be checked against
ifmsh->ie_len and not 0. Otherwise all ifmsh->ie starting with
WLAN_EID_VENDOR_SPECIFIC will be rejected.
Fixes:
082ebb0c258d ("mac80211: fix mesh beacon format")
Signed-off-by: Thorsten Horstmann <thorsten@defutech.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[sven@narfation.org: Add commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jouni Malinen [Sat, 4 Feb 2017 16:08:42 +0000 (18:08 +0200)]
mac80211: Allocate a sync skcipher explicitly for FILS AEAD
The skcipher could have been of the async variant which may return from
skcipher_encrypt() with -EINPROGRESS after having queued the request.
The FILS AEAD implementation here does not have code for dealing with
that possibility, so allocate a sync cipher explicitly to avoid
potential issues with hardware accelerators.
This is based on the patch sent out by Ard.
Fixes:
39404feee691 ("mac80211: FILS AEAD protection for station mode association frames")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jouni Malinen [Sat, 4 Feb 2017 11:59:22 +0000 (13:59 +0200)]
mac80211: Fix FILS AEAD protection in Association Request frame
Incorrect num_elem parameter value (1 vs. 5) was used in the
aes_siv_encrypt() call. This resulted in only the first one of the five
AAD vectors to SIV getting included in calculation. This does not
protect all the contents correctly and would not interoperate with a
standard compliant implementation.
Fix this by using the correct number. A matching fix is needed in the AP
side (hostapd) to get FILS authentication working properly.
Fixes:
39404feee691 ("mac80211: FILS AEAD protection for station mode association frames")
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Linus Torvalds [Sun, 5 Feb 2017 23:10:58 +0000 (15:10 -0800)]
Linux 4.10-rc7
Eric Dumazet [Sun, 5 Feb 2017 07:18:55 +0000 (23:18 -0800)]
ip6_gre: fix ip6gre_err() invalid reads
Andrey Konovalov reported out of bound accesses in ip6gre_err()
If GRE flags contains GRE_KEY, the following expression
*(((__be32 *)p) + (grehlen / 4) - 1)
accesses data ~40 bytes after the expected point, since
grehlen includes the size of IPv6 headers.
Let's use a "struct gre_base_hdr *greh" pointer to make this
code more readable.
p[1] becomes greh->protocol.
grhlen is the GRE header length.
Fixes:
c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 3 Feb 2017 08:03:26 +0000 (00:03 -0800)]
netlabel: out of bound access in cipso_v4_validate()
syzkaller found another out of bound access in ip_options_compile(),
or more exactly in cipso_v4_validate()
Fixes:
20e2a8648596 ("cipso: handle CIPSO options correctly when NetLabel is disabled")
Fixes:
446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 4 Feb 2017 19:16:52 +0000 (11:16 -0800)]
ipv4: keep skb->dst around in presence of IP options
Andrey Konovalov got crashes in __ip_options_echo() when a NULL skb->dst
is accessed.
ipv4_pktinfo_prepare() should not drop the dst if (evil) IP options
are present.
We could refine the test to the presence of ts_needtime or srr,
but IP options are not often used, so let's be conservative.
Thanks to syzkaller team for finding this bug.
Fixes:
d826eb14ecef ("ipv4: PKTINFO doesnt need dst reference")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Sat, 4 Feb 2017 22:47:31 +0000 (14:47 -0800)]
libnvdimm, pfn: fix memmap reservation size versus 4K alignment
When vmemmap_populate() allocates space for the memmap it does so in 2MB
sized chunks. The libnvdimm-pfn driver incorrectly accounts for this
when the alignment of the device is set to 4K. When this happens we
trigger memory allocation failures in altmap_alloc_block_buf() and
trigger warnings of the form:
WARNING: CPU: 0 PID: 3376 at arch/x86/mm/init_64.c:656 arch_add_memory+0xe4/0xf0
[..]
Call Trace:
dump_stack+0x86/0xc3
__warn+0xcb/0xf0
warn_slowpath_null+0x1d/0x20
arch_add_memory+0xe4/0xf0
devm_memremap_pages+0x29b/0x4e0
Fixes:
315c562536c4 ("libnvdimm, pfn: add 'align' attribute, default to HPAGE_SIZE")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linus Torvalds [Sat, 4 Feb 2017 20:18:01 +0000 (12:18 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Prevent double activation of interrupt lines, which causes problems
on certain interrupt controllers
- Handle the fallout of the above because x86 (ab)uses the activation
function to reconfigure interrupts under the hood.
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Make irq activate operations symmetric
irqdomain: Avoid activating interrupts more than once
Linus Torvalds [Sat, 4 Feb 2017 20:07:54 +0000 (12:07 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fix from Radim Krčmář:
"Fix a regression that prevented migration between hosts with different
XSAVE features even if the missing features were not used by the guest
(for stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: do not save guest-unsupported XSAVE state
Linus Torvalds [Sat, 4 Feb 2017 18:44:15 +0000 (10:44 -0800)]
Merge tag 'char-misc-4.10-rc7' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two bugfixes that resolve some reported issues. One in the
firmware loader, that should fix the much-reported problem of crashes
with it. The other is a hyperv fix for a reported regression.
Both have been in linux-next for a week or so with no reported issues"
* tag 'char-misc-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()
firmware: fix NULL pointer dereference in __fw_load_abort()
Linus Torvalds [Sat, 4 Feb 2017 18:38:09 +0000 (10:38 -0800)]
Merge tag 'staging-4.10-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a few small IIO and one staging driver fix for 4.10-rc7. They
fix some reported issues with the drivers.
All of them have been in linux-next for a week or so with no reported
issues"
* tag 'staging-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: greybus: timesync: validate platform state callback
iio: dht11: Use usleep_range instead of msleep for start signal
iio: adc: palmas_gpadc: retrieve a valid iio_dev in suspend/resume
iio: health: max30100: fixed parenthesis around FIFO count check
iio: health:
afe4404: retrieve a valid iio_dev in suspend/resume
iio: health:
afe4403: retrieve a valid iio_dev in suspend/resume
Linus Torvalds [Sat, 4 Feb 2017 18:35:55 +0000 (10:35 -0800)]
Merge tag 'usb-4.10-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported issues, and the usual
number of new device ids for 4.10-rc7.
All of these, except the last new device id, have been in linux-next
for a while with no reported issues"
* tag 'usb-4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: pl2303: add ATEN device ID
usb: gadget: f_fs: Assorted buffer overflow checks.
USB: Add quirk for WORLDE easykey.25 MIDI keyboard
usb: musb: Fix external abort on non-linefetch for musb_irq_work()
usb: musb: Fix host mode error -71 regression
USB: serial: option: add device ID for HP lt2523 (Novatel E371)
USB: serial: qcserial: add Dell DW5570 QDL
Linus Torvalds [Sat, 4 Feb 2017 00:18:51 +0000 (16:18 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix this time: a fix for a virtqueue removal bug which only
appears to affect S390, but which results in the queue hanging forever
thus causing the machine to fail shutdown"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: virtio_scsi: Reject commands when virtqueue is broken
Rafael J. Wysocki [Fri, 3 Feb 2017 23:44:36 +0000 (00:44 +0100)]
PM / runtime: Avoid false-positive warnings from might_sleep_if()
The might_sleep_if() assertions in __pm_runtime_idle(),
__pm_runtime_suspend() and __pm_runtime_resume() may generate
false-positive warnings in some situations. For example, that
happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair
is executed with disabled interrupts within an outer
pm_runtime_get_sync()/pm_runtime_put() section for the same device.
[Generally, pm_runtime_get_sync() may sleep, so it should not be
called with disabled interrupts, but in this particular case the
previous pm_runtime_get_sync() guarantees that the device will not
be suspended, so the inner pm_runtime_get_sync() will return
immediately after incrementing the device's usage counter.]
That started to happen in the i915 driver in 4.10-rc, leading to
the following splat:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032
in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg
1 lock held by Xorg/1500:
#0: (&dev->struct_mutex){+.+.+.}, at:
[<
ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915]
CPU: 0 PID: 1500 Comm: Xorg Not tainted
Call Trace:
dump_stack+0x85/0xc2
___might_sleep+0x196/0x260
__might_sleep+0x53/0xb0
__pm_runtime_resume+0x7a/0x90
intel_runtime_pm_get+0x25/0x90 [i915]
aliasing_gtt_bind_vma+0xaa/0xf0 [i915]
i915_vma_bind+0xaf/0x1e0 [i915]
i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915]
i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915]
? trace_hardirqs_on+0xd/0x10
? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915]
? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915]
i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915]
? __might_fault+0x4e/0xb0
i915_gem_execbuffer2+0xc5/0x260 [i915]
? __might_fault+0x4e/0xb0
drm_ioctl+0x206/0x450 [drm]
? i915_gem_execbuffer+0x340/0x340 [i915]
? __fget+0x5/0x200
do_vfs_ioctl+0x91/0x6f0
? __fget+0x111/0x200
? __fget+0x5/0x200
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc6
even though the code triggering it is correct.
Unfortunately, the might_sleep_if() assertions in question are
too coarse-grained to cover such cases correctly, so make them
a bit less sensitive in order to avoid the false-positives.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Fri, 3 Feb 2017 23:43:30 +0000 (15:43 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio/vhost fixes from Michael S. Tsirkin:
"Last minute fixes:
- ARM DMA fix revert
- vhost endian-ness fix
- MAINTAINERS: email address change for Amit"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
MAINTAINERS: update email address for Amit Shah
vhost: fix initialization for vq->is_le
Revert "vring: Force use of DMA API for ARM-based systems with legacy devices"
Linus Torvalds [Fri, 3 Feb 2017 23:38:53 +0000 (15:38 -0800)]
Merge tag 'vfio-v4.10-rc7' of git://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
"Fix an error path in SPAPR IOMMU backend (Alexey Kardashevskiy)"
* tag 'vfio-v4.10-rc7' of git://github.com/awilliam/linux-vfio:
vfio/spapr: Fix missing mutex unlock when creating a window
Srinivas Pandruvada [Fri, 3 Feb 2017 22:18:39 +0000 (14:18 -0800)]
cpufreq: intel_pstate: Disable energy efficiency optimization
Some Kabylake desktop processors may not reach max turbo when running in
HWP mode, even if running under sustained 100% utilization.
This occurs when the HWP.EPP (Energy Performance Preference) is set to
"balance_power" (0x80) -- the default on most systems.
It occurs because the platform BIOS may erroneously enable an
energy-efficiency setting -- MSR_IA32_POWER_CTL BIT-EE, which is not
recommended to be enabled on this SKU.
On the failing systems, this BIOS issue was not discovered when the
desktop motherboard was tested with Windows, because the BIOS also
neglects to provide the ACPI/CPPC table, that Windows requires to enable
HWP, and so Windows runs in legacy P-state mode, where this setting has
no effect.
Linux' intel_pstate driver does not require ACPI/CPPC to enable HWP, and
so it runs in HWP mode, exposing this incorrect BIOS configuration.
There are several ways to address this problem.
First, Linux can also run in legacy P-state mode on this system.
As intel_pstate is how Linux enables HWP, booting with
"intel_pstate=disable"
will run in acpi-cpufreq/ondemand legacy p-state mode.
Or second, the "performance" governor can be used with intel_pstate,
which will modify HWP.EPP to 0.
Or third, starting in 4.10, the
/sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference
attribute in can be updated from "balance_power" to "performance".
Or fourth, apply this patch, which fixes the erroneous setting of
MSR_IA32_POWER_CTL BIT_EE on this model, allowing the default
configuration to function as designed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Fri, 3 Feb 2017 22:50:42 +0000 (14:50 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, fs: check for fatal signals in do_generic_file_read()
fs: break out of iomap_file_buffered_write on fatal signals
base/memory, hotplug: fix a kernel oops in show_valid_zones()
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
jump label: pass kbuild_cflags when checking for asm goto support
shmem: fix sleeping from atomic context
kasan: respect /proc/sys/kernel/traceoff_on_warning
zswap: disable changing params if init fails
Michal Hocko [Fri, 3 Feb 2017 21:13:29 +0000 (13:13 -0800)]
mm, fs: check for fatal signals in do_generic_file_read()
do_generic_file_read() can be told to perform a large request from
userspace. If the system is under OOM and the reading task is the OOM
victim then it has an access to memory reserves and finishing the full
request can lead to the full memory depletion which is dangerous. Make
sure we rather go with a short read and allow the killed task to
terminate.
Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 3 Feb 2017 21:13:26 +0000 (13:13 -0800)]
fs: break out of iomap_file_buffered_write on fatal signals
Tetsuo has noticed that an OOM stress test which performs large write
requests can cause the full memory reserves depletion. He has tracked
this down to the following path
__alloc_pages_nodemask+0x436/0x4d0
alloc_pages_current+0x97/0x1b0
__page_cache_alloc+0x15d/0x1a0 mm/filemap.c:728
pagecache_get_page+0x5a/0x2b0 mm/filemap.c:1331
grab_cache_page_write_begin+0x23/0x40 mm/filemap.c:2773
iomap_write_begin+0x50/0xd0 fs/iomap.c:118
iomap_write_actor+0xb5/0x1a0 fs/iomap.c:190
? iomap_write_end+0x80/0x80 fs/iomap.c:150
iomap_apply+0xb3/0x130 fs/iomap.c:79
iomap_file_buffered_write+0x68/0xa0 fs/iomap.c:243
? iomap_write_end+0x80/0x80
xfs_file_buffered_aio_write+0x132/0x390 [xfs]
? remove_wait_queue+0x59/0x60
xfs_file_write_iter+0x90/0x130 [xfs]
__vfs_write+0xe5/0x140
vfs_write+0xc7/0x1f0
? syscall_trace_enter+0x1d0/0x380
SyS_write+0x58/0xc0
do_syscall_64+0x6c/0x200
entry_SYSCALL64_slow_path+0x25/0x25
the oom victim has access to all memory reserves to make a forward
progress to exit easier. But iomap_file_buffered_write and other
callers of iomap_apply loop to complete the full request. We need to
check for fatal signals and back off with a short write instead.
As the iomap_apply delegates all the work down to the actor we have to
hook into those. All callers that work with the page cache are calling
iomap_write_begin so we will check for signals there. dax_iomap_actor
has to handle the situation explicitly because it copies data to the
userspace directly. Other callers like iomap_page_mkwrite work on a
single page or iomap_fiemap_actor do not allocate memory based on the
given len.
Fixes:
68a9f5e7007c ("xfs: implement iomap based buffered write path")
Link: http://lkml.kernel.org/r/20170201092706.9966-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toshi Kani [Fri, 3 Feb 2017 21:13:23 +0000 (13:13 -0800)]
base/memory, hotplug: fix a kernel oops in show_valid_zones()
Reading a sysfs "memoryN/valid_zones" file leads to the following oops
when the first page of a range is not backed by struct page.
show_valid_zones() assumes that 'start_pfn' is always valid for
page_zone().
BUG: unable to handle kernel paging request at
ffffea017a000000
IP: show_valid_zones+0x6f/0x160
This issue may happen on x86-64 systems with 64GiB or more memory since
their memory block size is bumped up to 2GiB. [1] An example of such
systems is desribed below. 0x3240000000 is only aligned by 1GiB and
this memory block starts from 0x3200000000, which is not backed by
struct page.
BIOS-e820: [mem 0x0000003240000000-0x000000603fffffff] usable
Since test_pages_in_a_zone() already checks holes, fix this issue by
extending this function to return 'valid_start' and 'valid_end' for a
given range. show_valid_zones() then proceeds with the valid range.
[1] 'Commit
bdee237c0343 ("x86: mm: Use 2GB memory block size on
large-memory x86-64 systems")'
Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Zhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org> [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Toshi Kani [Fri, 3 Feb 2017 21:13:20 +0000 (13:13 -0800)]
mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()
Patch series "fix a kernel oops when reading sysfs valid_zones", v2.
A sysfs memory file is created for each 2GiB memory block on x86-64 when
the system has 64GiB or more memory. [1] When the start address of a
memory block is not backed by struct page, i.e. a memory range is not
aligned by 2GiB, reading its 'valid_zones' attribute file leads to a
kernel oops. This issue was observed on multiple x86-64 systems with
more than 64GiB of memory. This patch-set fixes this issue.
Patch 1 first fixes an issue in test_pages_in_a_zone(), which does not
test the start section.
Patch 2 then fixes the kernel oops by extending test_pages_in_a_zone()
to return valid [start, end).
Note for stable kernels: The memory block size change was made by commit
bdee237c0343 ("x86: mm: Use 2GB memory block size on large-memory x86-64
systems"), which was accepted to 3.9. However, this patch-set depends
on (and fixes) the change to test_pages_in_a_zone() made by commit
5f0f2887f4de ("mm/memory_hotplug.c: check for missing sections in
test_pages_in_a_zone()"), which was accepted to 4.4.
So, I recommend that we backport it up to 4.4.
[1] 'Commit
bdee237c0343 ("x86: mm: Use 2GB memory block size on
large-memory x86-64 systems")'
This patch (of 2):
test_pages_in_a_zone() does not check 'start_pfn' when it is aligned by
section since 'sec_end_pfn' is set equal to 'pfn'. Since this function
is called for testing the range of a sysfs memory file, 'start_pfn' is
always aligned by section.
Fix it by properly setting 'sec_end_pfn' to the next section pfn.
Also make sure that this function returns 1 only when the range belongs
to a zone.
Link: http://lkml.kernel.org/r/20170127222149.30893-2-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@vger.kernel.org> [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Lin [Fri, 3 Feb 2017 21:13:18 +0000 (13:13 -0800)]
jump label: pass kbuild_cflags when checking for asm goto support
Some versions of ARM GCC compiler such as Android toolchain throws in a
'-fpic' flag by default. This causes the gcc-goto check script to fail
although some config would have '-fno-pic' flag in the KBUILD_CFLAGS.
This patch passes the KBUILD_CFLAGS to the check script so that the
script does not rely on the default config from different compilers.
Link: http://lkml.kernel.org/r/20170120234329.78868-1-dtwlin@google.com
Signed-off-by: David Lin <dtwlin@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 3 Feb 2017 21:13:15 +0000 (13:13 -0800)]
shmem: fix sleeping from atomic context
Syzkaller fuzzer managed to trigger this:
BUG: sleeping function called from invalid context at mm/shmem.c:852
in_atomic(): 1, irqs_disabled(): 0, pid: 529, name: khugepaged
3 locks held by khugepaged/529:
#0: (shrinker_rwsem){++++..}, at: [<
ffffffff818d7ef1>] shrink_slab.part.59+0x121/0xd30 mm/vmscan.c:451
#1: (&type->s_umount_key#29){++++..}, at: [<
ffffffff81a63630>] trylock_super+0x20/0x100 fs/super.c:392
#2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<
ffffffff818fd83e>] spin_lock include/linux/spinlock.h:302 [inline]
#2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<
ffffffff818fd83e>] shmem_unused_huge_shrink+0x28e/0x1490 mm/shmem.c:427
CPU: 2 PID: 529 Comm: khugepaged Not tainted 4.10.0-rc5+ #201
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
shmem_undo_range+0xb20/0x2710 mm/shmem.c:852
shmem_truncate_range+0x27/0xa0 mm/shmem.c:939
shmem_evict_inode+0x35f/0xca0 mm/shmem.c:1030
evict+0x46e/0x980 fs/inode.c:553
iput_final fs/inode.c:1515 [inline]
iput+0x589/0xb20 fs/inode.c:1542
shmem_unused_huge_shrink+0xbad/0x1490 mm/shmem.c:446
shmem_unused_huge_scan+0x10c/0x170 mm/shmem.c:512
super_cache_scan+0x376/0x450 fs/super.c:106
do_shrink_slab mm/vmscan.c:378 [inline]
shrink_slab.part.59+0x543/0xd30 mm/vmscan.c:481
shrink_slab mm/vmscan.c:2592 [inline]
shrink_node+0x2c7/0x870 mm/vmscan.c:2592
shrink_zones mm/vmscan.c:2734 [inline]
do_try_to_free_pages+0x369/0xc80 mm/vmscan.c:2776
try_to_free_pages+0x3c6/0x900 mm/vmscan.c:2982
__perform_reclaim mm/page_alloc.c:3301 [inline]
__alloc_pages_direct_reclaim mm/page_alloc.c:3322 [inline]
__alloc_pages_slowpath+0xa24/0x1c30 mm/page_alloc.c:3683
__alloc_pages_nodemask+0x544/0xae0 mm/page_alloc.c:3848
__alloc_pages include/linux/gfp.h:426 [inline]
__alloc_pages_node include/linux/gfp.h:439 [inline]
khugepaged_alloc_page+0xc2/0x1b0 mm/khugepaged.c:750
collapse_huge_page+0x182/0x1fe0 mm/khugepaged.c:955
khugepaged_scan_pmd+0xfdf/0x12a0 mm/khugepaged.c:1208
khugepaged_scan_mm_slot mm/khugepaged.c:1727 [inline]
khugepaged_do_scan mm/khugepaged.c:1808 [inline]
khugepaged+0xe9b/0x1590 mm/khugepaged.c:1853
kthread+0x326/0x3f0 kernel/kthread.c:227
ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
The iput() from atomic context was a bad idea: if after igrab() somebody
else calls iput() and we left with the last inode reference, our iput()
would lead to inode eviction and therefore sleeping.
This patch should fix the situation.
Link: http://lkml.kernel.org/r/20170131093141.GA15899@node.shutemov.name
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Fri, 3 Feb 2017 21:13:12 +0000 (13:13 -0800)]
kasan: respect /proc/sys/kernel/traceoff_on_warning
After much waiting I finally reproduced a KASAN issue, only to find my
trace-buffer empty of useful information because it got spooled out :/
Make kasan_report honour the /proc/sys/kernel/traceoff_on_warning
interface.
Link: http://lkml.kernel.org/r/20170125164106.3514-1-aryabinin@virtuozzo.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Streetman [Fri, 3 Feb 2017 21:13:09 +0000 (13:13 -0800)]
zswap: disable changing params if init fails
Add zswap_init_failed bool that prevents changing any of the module
params, if init_zswap() fails, and set zswap_enabled to false. Change
'enabled' param to a callback, and check zswap_init_failed before
allowing any change to 'enabled', 'zpool', or 'compressor' params.
Any driver that is built-in to the kernel will not be unloaded if its
init function returns error, and its module params remain accessible for
users to change via sysfs. Since zswap uses param callbacks, which
assume that zswap has been initialized, changing the zswap params after
a failed initialization will result in WARNING due to the param
callbacks expecting a pool to already exist. This prevents that by
immediately exiting any of the param callbacks if initialization failed.
This was reported here:
https://marc.info/?l=linux-mm&m=
147004228125528&w=4
And fixes this WARNING:
[ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
The warning is just noise, and not serious. However, when init fails,
zswap frees all its percpu dstmem pages and its kmem cache. The kmem
cache might be serious, if kmem_cache_alloc(NULL, gfp) has problems; but
the percpu dstmem pages are definitely a problem, as they're used as
temporary buffer for compressed pages before copying into place in the
zpool.
If the user does get zswap enabled after an init failure, then zswap
will likely Oops on the first page it tries to compress (or worse, start
corrupting memory).
Fixes:
90b0fc26d5db ("zswap: change zpool/compressor at runtime")
Link: http://lkml.kernel.org/r/20170124200259.16191-2-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Reported-by: Marcin Miroslaw <marcin@mejor.pl>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 3 Feb 2017 21:46:38 +0000 (13:46 -0800)]
Merge tag 'regulator-fix-v4.10-rc6' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Three changes here: two run of the mill driver specific fixes and a
change from Mark Rutland which reverts some new device specific ACPI
binding code which was added during the merge window as there are
concerns about this sending the wrong signal about usage of regulators
in ACPI systems"
* tag 'regulator-fix-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fixed: Revert support for ACPI interface
regulator: axp20x: AXP806: Fix dcdcb being set instead of dcdce
regulator: twl6030: fix range comparison, allowing vsel = 59
Amit Shah [Fri, 3 Feb 2017 11:18:14 +0000 (16:48 +0530)]
MAINTAINERS: update email address for Amit Shah
I'm leaving my job at Red Hat, this email address will stop working next week.
Update it to one that I will have access to later.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Halil Pasic [Mon, 30 Jan 2017 10:09:36 +0000 (11:09 +0100)]
vhost: fix initialization for vq->is_le
Currently, under certain circumstances vhost_init_is_le does just a part
of the initialization job, and depends on vhost_reset_is_le being called
too. For this reason vhost_vq_init_access used to call vhost_reset_is_le
when vq->private_data is NULL. This is not only counter intuitive, but
also real a problem because it breaks vhost_net. The bug was introduced to
vhost_net with commit
2751c9882b94 ("vhost: cross-endian support for
legacy devices"). The symptom is corruption of the vq's used.idx field
(virtio) after VHOST_NET_SET_BACKEND was issued as a part of the vhost
shutdown on a vq with pending descriptors.
Let us make sure the outcome of vhost_init_is_le never depend on the state
it is actually supposed to initialize, and fix virtio_net by removing the
reset from vhost_vq_init_access.
With the above, there is no reason for vhost_reset_is_le to do just half
of the job. Let us make vhost_reset_is_le reinitialize is_le.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reported-by: Michael A. Tebolt <miket@us.ibm.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: commit
2751c9882b94 ("vhost: cross-endian support for legacy devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Michael A. Tebolt <miket@us.ibm.com>
Michael S. Tsirkin [Fri, 3 Feb 2017 03:43:52 +0000 (05:43 +0200)]
Revert "vring: Force use of DMA API for ARM-based systems with legacy devices"
This reverts commit
c7070619f3408d9a0dffbed9149e6f00479cf43b.
This has been shown to regress on some ARM systems:
by forcing on DMA API usage for ARM systems, we have inadvertently
kicked open a hornets' nest in terms of cache-coherency. Namely that
unless the virtio device is explicitly described as capable of coherent
DMA by firmware, the DMA APIs on ARM and other DT-based platforms will
assume it is non-coherent. This turns out to cause a big problem for the
likes of QEMU and kvmtool, which generate virtio-mmio devices in their
guest DTs but neglect to add the often-overlooked "dma-coherent"
property; as a result, we end up with the guest making non-cacheable
accesses to the vring, the host doing so cacheably, both talking past
each other and things going horribly wrong.
We are working on a safer work-around.
Fixes:
c7070619f340 ("vring: Force use of DMA API for ARM-based systems with legacy devices")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Greg Kroah-Hartman [Fri, 3 Feb 2017 21:19:15 +0000 (22:19 +0100)]
Merge tag 'usb-serial-4.10-rc7' of git://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.10-rc7
One more device ID for pl2303.
Signed-off-by: Johan Hovold <johan@kernel.org>
Eric Dumazet [Thu, 2 Feb 2017 18:31:35 +0000 (10:31 -0800)]
net: use a work queue to defer net_disable_timestamp() work
Dmitry reported a warning [1] showing that we were calling
net_disable_timestamp() -> static_key_slow_dec() from a non
process context.
Grabbing a mutex while holding a spinlock or rcu_read_lock()
is not allowed.
As Cong suggested, we now use a work queue.
It is possible netstamp_clear() exits while netstamp_needed_deferred
is not zero, but it is probably not worth trying to do better than that.
netstamp_needed_deferred atomic tracks the exact number of deferred
decrements.
[1]
[ INFO: suspicious RCU usage. ]
4.10.0-rc5+ #192 Not tainted
-------------------------------
./include/linux/rcupdate.h:561 Illegal context switch in RCU read-side
critical section!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 0
2 locks held by syz-executor14/23111:
#0: (sk_lock-AF_INET6){+.+.+.}, at: [<
ffffffff83a35c35>] lock_sock
include/net/sock.h:1454 [inline]
#0: (sk_lock-AF_INET6){+.+.+.}, at: [<
ffffffff83a35c35>]
rawv6_sendmsg+0x1e65/0x3ec0 net/ipv6/raw.c:919
#1: (rcu_read_lock){......}, at: [<
ffffffff83ae2678>] nf_hook
include/linux/netfilter.h:201 [inline]
#1: (rcu_read_lock){......}, at: [<
ffffffff83ae2678>]
__ip6_local_out+0x258/0x840 net/ipv6/output_core.c:160
stack backtrace:
CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4452
rcu_preempt_sleep_check include/linux/rcupdate.h:560 [inline]
___might_sleep+0x560/0x650 kernel/sched/core.c:7748
__might_sleep+0x95/0x1a0 kernel/sched/core.c:7739
mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752
atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060
__static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149
static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174
net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728
sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403
__sk_destruct+0x27d/0x6b0 net/core/sock.c:1441
sk_destruct+0x47/0x80 net/core/sock.c:1460
__sk_free+0x57/0x230 net/core/sock.c:1468
sock_wfree+0xae/0x120 net/core/sock.c:1645
skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655
skb_release_all+0x15/0x60 net/core/skbuff.c:668
__kfree_skb+0x15/0x20 net/core/skbuff.c:684
kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705
inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
inet_frag_put include/net/inet_frag.h:133 [inline]
nf_ct_frag6_gather+0x1106/0x3840
net/ipv6/netfilter/nf_conntrack_reasm.c:617
ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline]
nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
nf_hook include/linux/netfilter.h:212 [inline]
__ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160
ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
rawv6_push_pending_frames net/ipv6/raw.c:613 [inline]
rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
sock_sendmsg_nosec net/socket.c:635 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:645
sock_write_iter+0x326/0x600 net/socket.c:848
do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695
do_readv_writev+0x42c/0x9b0 fs/read_write.c:872
vfs_writev+0x87/0xc0 fs/read_write.c:911
do_writev+0x110/0x2c0 fs/read_write.c:944
SYSC_writev fs/read_write.c:1017 [inline]
SyS_writev+0x27/0x30 fs/read_write.c:1014
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x445559
RSP: 002b:
00007f6f46fceb58 EFLAGS:
00000292 ORIG_RAX:
0000000000000014
RAX:
ffffffffffffffda RBX:
0000000000000005 RCX:
0000000000445559
RDX:
0000000000000001 RSI:
0000000020f1eff0 RDI:
0000000000000005
RBP:
00000000006e19c0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000292 R12:
0000000000700000
R13:
0000000020f59000 R14:
0000000000000015 R15:
0000000000020400
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:752
in_atomic(): 1, irqs_disabled(): 0, pid: 23111, name: syz-executor14
INFO: lockdep is turned off.
CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
___might_sleep+0x47e/0x650 kernel/sched/core.c:7780
__might_sleep+0x95/0x1a0 kernel/sched/core.c:7739
mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752
atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060
__static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149
static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174
net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728
sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403
__sk_destruct+0x27d/0x6b0 net/core/sock.c:1441
sk_destruct+0x47/0x80 net/core/sock.c:1460
__sk_free+0x57/0x230 net/core/sock.c:1468
sock_wfree+0xae/0x120 net/core/sock.c:1645
skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655
skb_release_all+0x15/0x60 net/core/skbuff.c:668
__kfree_skb+0x15/0x20 net/core/skbuff.c:684
kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705
inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
inet_frag_put include/net/inet_frag.h:133 [inline]
nf_ct_frag6_gather+0x1106/0x3840
net/ipv6/netfilter/nf_conntrack_reasm.c:617
ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline]
nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
nf_hook include/linux/netfilter.h:212 [inline]
__ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160
ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
rawv6_push_pending_frames net/ipv6/raw.c:613 [inline]
rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
sock_sendmsg_nosec net/socket.c:635 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:645
sock_write_iter+0x326/0x600 net/socket.c:848
do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695
do_readv_writev+0x42c/0x9b0 fs/read_write.c:872
vfs_writev+0x87/0xc0 fs/read_write.c:911
do_writev+0x110/0x2c0 fs/read_write.c:944
SYSC_writev fs/read_write.c:1017 [inline]
SyS_writev+0x27/0x30 fs/read_write.c:1014
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x445559
Fixes:
b90e5794c5bd ("net: dont call jump_label_dec from irq context")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 3 Feb 2017 20:01:54 +0000 (12:01 -0800)]
Merge tag 'mmc-v4.10-rc6' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"MMC host: sdhci: Avoid hang when receiving spurious CARD_INT
interrupts"
* tag 'mmc-v4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Ignore unexpected CARD_INT interrupts
Dan Williams [Thu, 2 Feb 2017 18:31:00 +0000 (10:31 -0800)]
acpi, nfit: fix acpi_nfit_flush_probe() crash
We queue an on-stack work item to 'nfit_wq' and wait for it to complete
as part of a 'flush_probe' request. However, if the user cancels the
wait we need to make sure the item is flushed from the queue otherwise
we are leaving an out-of-scope stack address on the work list.
BUG: unable to handle kernel paging request at
ffffbcb3c72f7cd0
IP: [<
ffffffffa9413a7b>] __list_add+0x1b/0xb0
[..]
RIP: 0010:[<
ffffffffa9413a7b>] [<
ffffffffa9413a7b>] __list_add+0x1b/0xb0
RSP: 0018:
ffffbcb3c7ba7c00 EFLAGS:
00010046
[..]
Call Trace:
[<
ffffffffa90bb11a>] insert_work+0x3a/0xc0
[<
ffffffffa927fdda>] ? seq_open+0x5a/0xa0
[<
ffffffffa90bb30a>] __queue_work+0x16a/0x460
[<
ffffffffa90bbb08>] queue_work_on+0x38/0x40
[<
ffffffffc0cf2685>] acpi_nfit_flush_probe+0x95/0xc0 [nfit]
[<
ffffffffc0cf25d0>] ? nfit_visible+0x40/0x40 [nfit]
[<
ffffffffa9571495>] wait_probe_show+0x25/0x60
[<
ffffffffa9546b30>] dev_attr_show+0x20/0x50
Fixes:
7ae0fa439faf ("nfit, libnvdimm: async region scrub workqueue")
Cc: <stable@vger.kernel.org>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linus Torvalds [Fri, 3 Feb 2017 19:32:25 +0000 (11:32 -0800)]
Merge tag 'drm-fixes-for-v4.10-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Another fixes pull for v4.10, it's a bit big due to the backport of
the VMA fixes for i915 that should fix the oops on shutdown problems
that you've worked around.
There are also two drm core connector registration fixes, a bunch of
nouveau regression fixes and two AMD fixes"
* tag 'drm-fixes-for-v4.10-rc7' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl
drm/amdgpu/si: fix crash on headless asics
drm/i915: Track pinned vma in intel_plane_state
drm/atomic: Unconditionally call prepare_fb.
drm/atomic: Fix double free in drm_atomic_state_default_clear
drm/nouveau/kms/nv50: request vblank events for commits that send completion events
drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval
drm/nouveau/disp/gt215: Fix HDA ELD handling (thus, HDMI audio) on gt215
drm/nouveau/nouveau/led: prevent compiling the led-code if nouveau=y and leds=m
drm/nouveau/disp/mcp7x: disable dptmds workaround
drm/nouveau: prevent userspace from deleting client object
drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers
drm: Don't race connector registration
drm: prevent double-(un)registration for connectors
Linus Torvalds [Fri, 3 Feb 2017 19:10:06 +0000 (11:10 -0800)]
Merge tag 'powerpc-4.10-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"The main change is we're reverting the initial stack protector support
we merged this cycle. It turns out to not work on toolchains built
with libc support, and fixing it will be need to wait for another
release.
And the rest are all fairly minor:
- Some pasemi machines were not booting due to a missing error check
in prom_find_boot_cpu()
- In EEH we were checking a pointer rather than the bool it pointed
to
- The clang build was broken by a BUILD_BUG_ON() we added.
- The radix (Power9 only) version of map_kernel_page() was broken if
our memory size was a multiple of 2MB, which it generally isn't
Thanks to: Darren Stevens, Gavin Shan, Reza Arbab"
* tag 'powerpc-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Use the correct pointer when setting a 2MB pte
powerpc: Fix build failure with clang due to BUILD_BUG_ON()
powerpc: Revert the initial stack protector support
powerpc/eeh: Fix wrong flag passed to eeh_unfreeze_pe()
powerpc: Add missing error check to prom_find_boot_cpu()
Linus Torvalds [Fri, 3 Feb 2017 19:06:59 +0000 (11:06 -0800)]
Merge tag 'trace-v4.10-rc2-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Simple fix of s/static struct __init/static __init struct/"
* tag 'trace-v4.10-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Fix __init annotation
Linus Torvalds [Fri, 3 Feb 2017 18:30:27 +0000 (10:30 -0800)]
Merge branch 'modversions' (modversions fixes for powerpc from Ard)
Merge kcrctab entry fixes from Ard Biesheuvel:
"This is a followup to [0] 'modversions: redefine kcrctab entries as
relative CRC pointers', but since relative CRC pointers do not work in
modules, and are actually only needed by powerpc with
CONFIG_RELOCATABLE=y, I have made it a Kconfig selectable feature
instead.
First it introduces the MODULE_REL_CRCS Kconfig symbol, and adds the
kbuild handling of it, i.e., modpost, genksyms and kallsyms.
Then it switches all architectures to 32-bit CRC entries in kcrctab,
where all architectures except powerpc with CONFIG_RELOCATABLE=y use
absolute ELF symbol references as before"
[0] http://marc.info/?l=linux-arch&m=
148493613415294&w=2
* emailed patches from Ard Biesheuvel:
module: unify absolute krctab definitions for 32-bit and 64-bit
modversions: treat symbol CRCs as 32 bit quantities
kbuild: modversions: add infrastructure for emitting relative CRCs
Ard Biesheuvel [Thu, 2 Feb 2017 18:05:26 +0000 (18:05 +0000)]
log2: make order_base_2() behave correctly on const input value zero
The function order_base_2() is defined (according to the comment block)
as returning zero on input zero, but subsequently passes the input into
roundup_pow_of_two(), which is explicitly undefined for input zero.
This has gone unnoticed until now, but optimization passes in GCC 7 may
produce constant folded function instances where a constant value of
zero is passed into order_base_2(), resulting in link errors against the
deliberately undefined '____ilog2_NaN'.
So update order_base_2() to adhere to its own documented interface.
[ See
http://marc.info/?l=linux-kernel&m=
147672952517795&w=2
and follow-up discussion for more background. The gcc "optimization
pass" is really just broken, but now the GCC trunk problem seems to
have escaped out of just specially built daily images, so we need to
work around it in mainline. - Linus ]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Radim Krčmář [Wed, 1 Feb 2017 13:19:53 +0000 (14:19 +0100)]
KVM: x86: do not save guest-unsupported XSAVE state
Saving unsupported state prevents migration when the new host does not
support a XSAVE feature of the original host, even if the feature is not
exposed to the guest.
We've masked host features with guest-visible features before, with
4344ee981e21 ("KVM: x86: only copy XSAVE state for the supported
features") and dropped it when implementing XSAVES. Do it again.
Fixes:
df1daba7d1cb ("KVM: x86: support XSAVES usage in the host")
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Ard Biesheuvel [Fri, 3 Feb 2017 09:54:07 +0000 (09:54 +0000)]
module: unify absolute krctab definitions for 32-bit and 64-bit
The previous patch introduced a separate inline asm version of the
krcrctab declaration template for use with 64-bit architectures, which
cannot refer to ELF symbols using 32-bit quantities.
This declaration should be equivalent to the C one for 32-bit
architectures, but just in case - unify them in a separate patch, which
can simply be dropped if it turns out to break anything.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>