OSDN Git Service
David S. Miller [Mon, 10 Apr 2006 05:43:55 +0000 (22:43 -0700)]
[IPV4] ip_fragment: Always compute hash with ipfrag_lock held.
Otherwise we could compute an inaccurate hash due to the
random seed changing.
Noticed by Zach Brown and patch is based upon some feedback
from Herbert Xu.
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Mon, 10 Apr 2006 05:38:29 +0000 (22:38 -0700)]
[NETFILTER]: Fix DNAT in LOCAL_OUT
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 10 Apr 2006 05:37:18 +0000 (22:37 -0700)]
[X25]: Restore skb->dev setting in x25_type_trans().
Noticed by Pascal Schlafer.
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergey Vlasov [Mon, 10 Apr 2006 05:32:48 +0000 (22:32 -0700)]
[NET]: Fix hotplug race during device registration.
From: Thomas de Grenier de Latour <degrenier@easyconnect.fr>
On Sun, 9 Apr 2006 21:56:59 +0400,
Sergey Vlasov <vsu@altlinux.ru> wrote:
> However, show_address() does not output anything unless
> dev->reg_state == NETREG_REGISTERED - and this state is set by
> netdev_run_todo() only after netdev_register_sysfs() returns, so in
> the meantime (while netdev_register_sysfs() is busy adding the
> "statistics" attribute group) some process may see an empty "address"
> attribute.
I've tried the attached patch, suggested by Sergey Vlasov on
hotplug-devel@, and as far as i can test it works just fine.
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Mon, 10 Apr 2006 05:29:17 +0000 (22:29 -0700)]
[IPV6]: Unexport secure_ipv6_port_ephemeral
This patch removes the unused EXPORT_SYMBOL(secure_ipv6_port_ephemeral).
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Brian Haley [Fri, 7 Apr 2006 22:00:06 +0000 (15:00 -0700)]
[NETFILTER]: Fix build with CONFIG_NETFILTER=y/m on IA64
Can't build with CONFIG_NETFILTER=y/m on IA64, there's a missing
#include in net/ipv6/netfilter.c
net/ipv6/netfilter.c: In function `nf_ip6_checksum':
net/ipv6/netfilter.c:92: warning: implicit declaration of function
`csum_ipv6_magic'
Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Morton [Fri, 7 Apr 2006 21:52:59 +0000 (14:52 -0700)]
[NET]: More kzalloc conversions.
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo 'Blaisorblade' Giarrusso [Fri, 7 Apr 2006 05:38:28 +0000 (22:38 -0700)]
[NET] kzalloc: use in alloc_netdev
Noticed this use, fixed it.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Fri, 7 Apr 2006 05:24:22 +0000 (22:24 -0700)]
[PKT_SCHED] act_police: Rename methods.
Rename policer specific _generic_ methods to be specific to
_act_police_
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 7 Apr 2006 04:46:34 +0000 (21:46 -0700)]
[TG3]: Speed up SRAM access (2nd version)
Speed up SRAM read and write functions if possible by using MMIO
instead of config. cycles. With this change, the post reset signature
done at the end of D3 power change must now be moved before the D3
power change.
IBM reported a problem on powerpc blades during ethtool self test that
was caused by the memory test taking excessively long. Config. cycles
are very slow on powerpc and the memory test can take more than 10
seconds to complete using config. cycles.
David Miller informed me that an earlier version of the patch caused
problems on sparc64 systems with built-in tg3 chips. This version
fixes the problem by excluding all SUN built-in tg3 chips from doing
MMIO SRAM access.
TG3_FLAG_EEPROM_WRITE_PROT is also set unconditionally when
TG3_FLG2_SUN_570X is set. This should be sane as all SUN chips are
built-in and do not require Vaux switching.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 7 Apr 2006 04:45:39 +0000 (21:45 -0700)]
[TG3]: Kill some less useful flags
Kill the TG3_FLAG_NO_{TX|RX}_PSEUDO_CSUM flags because they are not
very useful. This will free up some bits for new flags.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 6 Apr 2006 23:16:51 +0000 (16:16 -0700)]
[NETFILTER]: H.323 helper: remove changelog
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 6 Apr 2006 21:19:24 +0000 (14:19 -0700)]
[NETFILTER]: Convert conntrack/ipt_REJECT to new checksumming functions
Besides removing lots of duplicate code, all converted users benefit
from improved HW checksum error handling. Tested with and without HW
checksums in almost all combinations.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 6 Apr 2006 21:18:43 +0000 (14:18 -0700)]
[NETFILTER]: Add address family specific checksum helpers
Add checksum operation which takes care of verifying the checksum and
dealing with HW checksum errors and avoids multiple checksum
operations by setting ip_summed to CHECKSUM_UNNECESSARY after
successful verification.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 6 Apr 2006 21:18:09 +0000 (14:18 -0700)]
[NETFILTER]: Introduce infrastructure for address family specific operations
Change the queue rerouter intrastructure to a generic usable
infrastructure for address family specific operations as a base for
some cleanups.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 6 Apr 2006 21:17:27 +0000 (14:17 -0700)]
[NETFILTER]: Fix IP_NF_CONNTRACK_NETLINK dependency
When NAT is built as a module, ip_conntrack_netlink can not be linked
statically.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jing Min Zhao [Thu, 6 Apr 2006 21:15:33 +0000 (14:15 -0700)]
[NETFILTER]: H.323 helper: add parameter 'default_rrq_ttl'
default_rrq_ttl is used when no TTL is included in the RRQ.
Signed-off-by: Jing Min Zhao <zhaojingmin@users.sourceforge.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jing Min Zhao [Thu, 6 Apr 2006 21:14:59 +0000 (14:14 -0700)]
[NETFILTER]: H.323 helper: make get_h245_addr() static
Signed-off-by: Jing Min Zhao <zhaojingmin@users.sourceforge.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jing Min Zhao [Thu, 6 Apr 2006 21:14:11 +0000 (14:14 -0700)]
[NETFILTER]: H.323 helper: change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
Signed-off-by: Jing Min Zhao <zhaojingmin@users.sourceforge.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jing Min Zhao [Thu, 6 Apr 2006 21:13:42 +0000 (14:13 -0700)]
[NETFILTER]: H.323 helper: move some function prototypes to ip_conntrack_h323.h
Move prototypes of NAT callbacks to ip_conntrack_h323.h. Because the
use of typedefs as arguments, some header files need to be moved as
well.
Signed-off-by: Jing Min Zhao <zhaojingmin@users.sourceforge.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 6 Apr 2006 21:11:30 +0000 (14:11 -0700)]
[NETFILTER]: Fix section mismatch warnings
Fix section mismatch warnings caused by netfilter's init_or_cleanup
functions used in many places by splitting the init from the cleanup
parts.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 6 Apr 2006 21:09:49 +0000 (14:09 -0700)]
[NETFILTER]: Clean up hook registration
Clean up hook registration by makeing use of the new mass registration and
unregistration helpers.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Thu, 6 Apr 2006 21:09:12 +0000 (14:09 -0700)]
[NETFILTER]: Add helper functions for mass hook registration/unregistration
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Samuel Ortiz [Thu, 6 Apr 2006 05:39:14 +0000 (22:39 -0700)]
[IRDA]: Support for Sigmatel STIR421x chip
This patch enables support for the Sigmatel's STIR421x IrDA chip.
Once patched with Sigmatel's firmware, this chip "almost" follows the
USB-IrDA spec. Thus this patch is against irda-usb.[ch].
The code has been tested by Nick Fedchik on an STIR4210 chipset based
dongle.
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Thu, 6 Apr 2006 05:33:59 +0000 (22:33 -0700)]
[IRDA]: smcinit merged into smsc-ircc driver
This patch integrates the smcinit code into the smsc-ircc driver.
Some laptops have their smsc-ircc chip not properly configured by the
BIOS and needs some preconfiguration. Currently, this can be done from
userspace with smcinit, a utility that comes with the irda-utils
package. It messes with ioports and PCI settings, from userspace. Now
with this patch, if we happen to be on one of the known to be faulty
laptops, we preconfigure the chip from the driver.
Patch from Linus Walleij <triad@df.lth.se>
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Thu, 6 Apr 2006 05:31:19 +0000 (22:31 -0700)]
[INET]: Use port unreachable instead of proto for tunnels
This patch changes GRE and SIT to generate port unreachable instead of
protocol unreachable errors when we can't find a matching tunnel for a
packet.
This removes the ambiguity as to whether the error is caused by no
tunnel being found or by the lack of support for the given tunnel
type.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Sesterhenn [Thu, 6 Apr 2006 05:28:14 +0000 (22:28 -0700)]
[BLUETOOTH] sco: Possible double free.
this fixes coverity bug id #1068.
hci_send_sco() frees skb if (skb->len > hdev->sco_mtu).
Since it returns a negative error value only in this case, we
can directly return here.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Thu, 6 Apr 2006 05:21:04 +0000 (22:21 -0700)]
[TG3]: Fix a memory leak.
This patch fixes a memory leak (buf wasn't freed) spotted by the
Coverity checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Bunk [Thu, 6 Apr 2006 05:19:47 +0000 (22:19 -0700)]
[NET]: Fix an off-by-21-or-49 error.
This patch fixes an off-by-21-or-49 error ;-) spotted by the Coverity
checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Wed, 5 Apr 2006 03:11:56 +0000 (20:11 -0700)]
[NET] netconsole: set .name in struct console
Set .name in netconsole's struct console to identify the
struct's owner.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 4 Apr 2006 20:50:45 +0000 (13:50 -0700)]
[INET]: Move no-tunnel ICMP error to tunnel4/tunnel6
This patch moves the sending of ICMP messages when there are no IPv4/IPv6
tunnels present to tunnel4/tunnel6 respectively. Please note that for now
if xfrm4_tunnel/xfrm6_tunnel is loaded then no ICMP messages will ever be
sent. This is similar to how we handle AH/ESP/IPCOMP.
This move fixes the bug where we always send an ICMP message when there is
no ip6_tunnel device present for a given packet even if it is later handled
by IPsec. It also causes ICMP messages to be sent when no IPIP tunnel is
present.
I've decided to use the "port unreachable" ICMP message over the current
value of "address unreachable" (and "protocol unreachable" by GRE) because
it is not ambiguous unlike the other ones which can be triggered by other
conditions. There seems to be no standard specifying what value must be
used so this change should be OK. In fact we should change GRE to use
this value as well.
Incidentally, this patch also fixes a fairly serious bug in xfrm6_tunnel
where we don't check whether the embedded IPv6 header is present before
dereferencing it for the inside source address.
This patch is inspired by a previous patch by Hugo Santos <hsantos@av.it.pt>.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 4 Apr 2006 20:42:35 +0000 (13:42 -0700)]
[NETFILTER]: Fix fragmentation issues with bridge netfilter
The conntrack code doesn't do re-fragmentation of defragmented packets
anymore but relies on fragmentation in the IP layer. Purely bridged
packets don't pass through the IP layer, so the bridge netfilter code
needs to take care of fragmentation itself.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Olsson [Tue, 4 Apr 2006 19:53:35 +0000 (12:53 -0700)]
[FIB_TRIE]: Fix leaf freeing.
Seems like leaf (end-nodes) has been freed by __tnode_free_rcu and not
by __leaf_free_rcu. This fixes the problem. Only tnode_free is now
used which checks for appropriate node type. free_leaf can be removed.
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 4 Apr 2006 19:51:05 +0000 (12:51 -0700)]
[IPSEC]: Check x->encap before dereferencing it
We need to dereference x->encap before dereferencing it for encap_type.
If it's absent then the encap_type is zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Jones [Mon, 3 Apr 2006 06:34:19 +0000 (23:34 -0700)]
[SELINUX] Fix build after ipsec decap state changes.
security/selinux/xfrm.c: In function 'selinux_socket_getpeer_dgram':
security/selinux/xfrm.c:284: error: 'struct sec_path' has no member named 'x'
security/selinux/xfrm.c: In function 'selinux_xfrm_sock_rcv_skb':
security/selinux/xfrm.c:317: error: 'struct sec_path' has no member named 'x'
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sun, 9 Apr 2006 19:14:02 +0000 (12:14 -0700)]
Move request_standard_resources() back to before PCI probing
This effectively undoes the PCI resource allocation changes done in
commit
b408cbc704352eccee301e1103b23203ba1c3a0e, but leaves the cleanups
of that commit in place.
We're going back to marking the resources reported by e820 busy _before_
doing PCI probing, so that any PCI resource that clashes with the BIOS-
reported memory map will be reloacted to a non-clashing area.
The reason? Larry Finger reports that his laptop has the cardbus
controller set up by the BIOS so that it conflicts with the e820 memory
map, and needs to be relocated. See
http://bugzilla.kernel.org/show_bug.cgi?id=6337
for more details.
We'll have to work out how to handle the fbcon problem that caused that
commit in the first place in some other way.
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Antonino A. Daplas <adaplas@pol.net>
Cc: <bjk@luxsci.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:50:34 +0000 (19:50 +0200)]
[PATCH] x86_64: Update 32-bit system call table
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:50:31 +0000 (19:50 +0200)]
[PATCH] x86_64: Eliminate IA32_NR_syscalls define
Or rather compute it based on the table length automatically.
This also has the intended side effect of not warning for new system calls
anymore.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Sam Ravnborg [Fri, 7 Apr 2006 17:50:28 +0000 (19:50 +0200)]
[PATCH] x86_64: fix CONFIG_REORDER
Fix CONFIG_REORDER.
The value of cflags-y was assined to CFLAGS before cflags-y was assigned
the value used for CONFIG_REORDER.
Use cflags-y for all CFLAGS options in the Makefile to avoid this
happening again.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John Blackwood [Fri, 7 Apr 2006 17:50:25 +0000 (19:50 +0200)]
[PATCH] x86_64: Plug GS leak in arch_prctl()
In linux-2.6.16, we have noticed a problem where the gs base value
returned from an arch_prtcl(ARCH_GET_GS, ...) call will be incorrect if:
- the current/calling task has NOT set its own gs base yet to a
non-zero value,
- some other task that ran on the same processor previously set their
own gs base to a non-zero value.
In this situation, the ARCH_GET_GS code will read and return the
MSR_KERNEL_GS_BASE msr register.
However, since the __switch_to() code does NOT load/zero the
MSR_KERNEL_GS_BASE register when the task that is switched IN has a zero
next->gs value, the caller of arch_prctl(ARCH_GET_GS, ...) will get back
the value of some previous tasks's gs base value instead of 0.
Change the arch_prctl() ARCH_GET_GS code to only read and return
the MSR_KERNEL_GS_BASE msr register if the 'gs' register of the calling
task is non-zero.
Side note: Since in addition to using arch_prctl(ARCH_SET_GS, ...),
a task can also setup a gs base value by using modify_ldt() and write
an index value into 'gs' from user space, the patch below reads
'gs' instead of using thread.gs, since in the modify_ldt() case,
the thread.gs value will be 0, and incorrect value would be returned
(the task->thread.gs value).
When the user has not set its own gs base value and the 'gs'
register is zero, then the MSR_KERNEL_GS_BASE register will not be
read and a value of zero will be returned by reading and returning
'task->thread.gs'.
The first patch shown below is an attempt at implementing this
approach.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:50:21 +0000 (19:50 +0200)]
[PATCH] i386: Remove printk about reboot fixups at reboot
Printk doesn't have any value
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jordan Hargrave [Fri, 7 Apr 2006 17:50:18 +0000 (19:50 +0200)]
[PATCH] x86_64: Fix drift with HPET timer enabled
If the HPET timer is enabled, the clock can drift by ~3 seconds a day.
This is due to the HPET timer not being initialized with the correct
setting (still using PIT count).
If HZ changes, this drift can become even more pronounced.
HPET patch initializes tick_nsec with correct tick_nsec settings for
HPET timer.
Vojtech comments:
"It's not entirely correct (it assumes the HPET ticks totally
exactly), but it's significantly better than assuming the PIT error
there."
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:50:15 +0000 (19:50 +0200)]
[PATCH] i386/x86-64: Return defined error value for bad PCI config space accesses
Mostly to get better handling when a extended config space
access has to fallback to Type1.
Cc: gregkh@suse.de
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:50:12 +0000 (19:50 +0200)]
[PATCH] i386/x86_64: Check if MCFG works for the first 16 busses
Previously only the first bus would be checked against Type 1.
Why 16? Checking all would need too much memory and we
can assume that systems with more than 16 busses have better than
average quality BIOS.
This is an additional defense against bad MCFG tables.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ravikiran G Thirumalai [Fri, 7 Apr 2006 17:50:09 +0000 (19:50 +0200)]
[PATCH] x86_64: Fixup read_mostly section on internode cache line size for vSMP
Fixup the read mostly section to start at internode cacheline boundary.
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:50:06 +0000 (19:50 +0200)]
[PATCH] x86_64: Don't return error for HPET initialization in initcall
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:50:03 +0000 (19:50 +0200)]
[PATCH] x86_64: Don't export strlen twice
Fix
WARNING: vmlinux: 'strlen' exported twice. Previous export was in vmlinux
Reported by Mats Johannesson
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:50:00 +0000 (19:50 +0200)]
[PATCH] x86_64: When user could have changed RIP always force IRET
Intel EM64T CPUs handle uncanonical return addresses differently
from AMD CPUs.
The exception is reported in the SYSRET, not the next instruction.
This leads to the kernel exception handler running on the user stack
with the wrong GS because the kernel didn't expect exceptions
on this instruction.
This version of the patch has the teething problems that plagued an earlier
version fixed.
This is CVE-2006-0744
Thanks to Ernie Petrides and Asit B. Mallick for analysis and initial
patches.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:57 +0000 (19:49 +0200)]
[PATCH] x86_64: Don't run NMI watchdog during machine checks
Machine checks can stall the machine for a long time and
it's not good to trigger the nmi watchdog during that.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dave Hansen [Fri, 7 Apr 2006 17:49:54 +0000 (19:49 +0200)]
[PATCH] x86_64: extra NODES_SHIFT definition
The generic linux/numa.h file defines NODES_SHIFT to 0 in case
the architecture did not.
Every architecture which has a NUMA config option defines
NODES_SHIFT in its asm-$ARCH headers, but only if NUMA is
enabled, except for x86_64.
This should make it like all the rest.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jacob Shin [Fri, 7 Apr 2006 17:49:51 +0000 (19:49 +0200)]
[PATCH] x86_64: Proper null pointer check in powernow_k8_get
This prevents crashes on dual core system when enough ticks are lost.
Replaces earlier patch by me.
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:48 +0000 (19:49 +0200)]
[PATCH] x86_64: Revert earlier powernow-k8 change
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:45 +0000 (19:49 +0200)]
[PATCH] i386: Consolidate modern APIC handling
AMD systems have a modern APIC that supports 8 bit IDs, but
don't have a XAPIC version number. Add a new "modern_apic"
subfunction that handles this correctly and use it (nearly)
everywhere where XAPIC is tested for.
I removed one wart: the code specified that external APICs
would use an 8bit APIC ID. But I checked a real 82093 data sheet
and it says clearly that they only use 4bit. So I removed
this special case since it would a bit awkward to implement now.
I removed the valid APIC tests in mptable parsing completely. On any modern
system they only check against the full field width (8bit) anyways
and are no-ops. This also fixes them doing the wrong thing
on >8 core Opterons.
This makes i386 boot again on 16 core Opterons.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:42 +0000 (19:49 +0200)]
[PATCH] x86_64: Clear APIC feature bit when local APIC is disabled
Needed for other checks later in ACPI.
Pointed out by Len Brown
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:39 +0000 (19:49 +0200)]
[PATCH] x86-64/i386: Don't process APICs/IO-APICs in ACPI when APIC is disabled.
When nolapic was passed or the local APIC was disabled
for another reason ACPI would still parse the IO-APICs
until these were explicitely disabled with noapic.
Usually this resulted in a non booting configuration unless
"nolapic noapic" was used.
I also disabled the local APIC parsing in this case, although
that's only cosmetic (suppresses a few printks)
This hopefully makes nolapic work in all cases.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:36 +0000 (19:49 +0200)]
[PATCH] x86_64: Don't sanity check Type 1 PCI bus access on newer systems
Horus systems don't have anything on bus 0 which makes
the Type 1 sanity checks fail. Use the DMI BIOS year to
check for newer systems and always assume Type 1 works on them.
I used 2001 as an pretty arbitary cutoff year.
Cc: gregkh@suse.de
Cc: Navin Boppuri <navin.boppuri@newisys.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:33 +0000 (19:49 +0200)]
[PATCH] x86_64: Fix compilation with CONFIG_PCI=n / allnoconfig
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Fri, 7 Apr 2006 17:49:30 +0000 (19:49 +0200)]
[PATCH] i386/x86-64: Check that MCFG points to an e820 reserved area
This patch introduces a user for the e820_all_mapped function:
There have been several machines that don't have a working MMCONFIG,
often because of a buggy MCFG table in the ACPI bios. This patch adds a
simple sanity check that detects a whole bunch of these cases, and when
it detects it, linux now boots rather than crash-and-burns.
The accuracy of this detection can in principle be improved if there was
a "is this entire range in e820 with THIS attribute", but no such
function exist and the complexity needed for this is not really worth
it; this simple check already catches most cases anyway.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Fri, 7 Apr 2006 17:49:27 +0000 (19:49 +0200)]
[PATCH] x86_64: Introduce e820_all_mapped
Introduce a e820_all_mapped() function which checks if the entire range
<start,end> is mapped with type.
This is done by moving the local start variable to the end of each
known-good region; if at the end of the function the start address is
still before end, there must be a part that's not of the correct type;
otherwise it's a good region.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Fri, 7 Apr 2006 17:49:24 +0000 (19:49 +0200)]
[PATCH] x86_64: Rename e820_mapped to e820_any_mapped
Rename e820_mapped to e820_any_mapped since it tests if any part of the
range is mapped according to the type.
Later steps will introduce e820_all_mapped which will check if the
entire range is mapped with the type. Both have their merit.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:21 +0000 (19:49 +0200)]
[PATCH] x86_64: Handle empty PXMs that only contain hotplug memory
The node setup code would try to allocate the node metadata in the node
itself, but that fails if there is no memory in there.
This can happen with memory hotplug when the hotplug area defines an so
far empty node.
Now use bootmem to try to allocate the mem_map in other nodes.
And if it fails don't panic, but just ignore the node.
To make this work I added a new __alloc_bootmem_nopanic function that
does what its name implies.
TBD should try to use nearby nodes here. Currently we just use any.
It's hard to do it better because bootmem doesn't have proper fallback
lists yet.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:18 +0000 (19:49 +0200)]
[PATCH] x86_64: Reserve SRAT hotadd memory on x86-64
From: Keith Mannthey, Andi Kleen
Implement memory hotadd without sparsemem. The memory in the SRAT
hotadd area is just preserved instead and can be activated later.
There are a few restrictions:
- Only one continuous hotadd area allowed per node
The main problem is dealing with the many buggy SRAT tables
that are out there. The strategy here is to reject anything
suspicious.
Originally from Keith Mannthey, with several hacks and changes by AK
and also contributions from Andrew Morton
[ TBD: Problems pointed out by KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>:
1) Goto's rebuild_zonelist patch will not work if CONFIG_MEMORY_HOTPLUG=n.
Rebuilding zonelist is necessary when the system has just memory <
4G at boot, and hot add memory > 4G. because x86_64 has DMA32,
ZONE_NORAML is not included into zonelist at boot time if system
doesn't have memory >4G at boot.
[AK: should just force the higher zones at boot time when SRAT tells us]
2) zone and node's spanned_pages and present_pages are not incremented.
They should be.
For example, our server (ia64/Fujitsu PrimeQuest) can equip memory
from 4G to 1T(maybe 2T in future), and SRAT will *always* say we have
possible 1T +memory. (Microsoft requires "write all possible memory
in SRAT") When we reserve memmap for possible 1T memory, Linux will
not work well in +minimum 4G configuraion ;)
[AK: needs limiting to 5-10% of max memory]
]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:15 +0000 (19:49 +0200)]
[PATCH] x86_64: Support memory hotadd without sparsemem
Memory hotadd doesn't need SPARSEMEM, but can be handled by just preallocating
mem_maps. This only needs some untangling of ifdefs to enable the necessary
code even without SPARSEMEM.
Originally from Keith Mannthey, hacked by AK.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:12 +0000 (19:49 +0200)]
[PATCH] x86_64: Clean up execve path
Just call IRET always, no need for any special cases.
Needed for the next bug fix.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen [Fri, 7 Apr 2006 17:49:09 +0000 (19:49 +0200)]
[PATCH] x86_64: Update defconfig
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Mon, 3 Apr 2006 03:22:10 +0000 (20:22 -0700)]
Linux v2.6.17-rc1
Close of the merge window..
Linus Torvalds [Sun, 2 Apr 2006 21:37:36 +0000 (14:37 -0700)]
Update dummy snd_power_wait() function for new calling convention
Apparently nobody had tried to compile the ALSA CVS tree without power
management enabled.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sun, 2 Apr 2006 21:22:06 +0000 (14:22 -0700)]
Merge branch 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] splice: fix page stealing LRU handling.
[PATCH] splice: page stealing needs to wait_on_page_writeback()
[PATCH] splice: export generic_splice_sendpage
[PATCH] splice: add a SPLICE_F_MORE flag
[PATCH] splice: add comments documenting more of the code
[PATCH] splice: improve writeback and clean up page stealing
[PATCH] splice: fix shadow[] filling logic
Jens Axboe [Sun, 2 Apr 2006 21:11:04 +0000 (23:11 +0200)]
[PATCH] splice: fix page stealing LRU handling.
Originally from Nick Piggin, just adapted to the newer branch.
You can't check PageLRU without holding zone->lru_lock. The page
release code can get away with it only because the page refcount is 0 at
that point. Also, you can't reliably remove pages from the LRU unless
the refcount is 0. Ever.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Jens Axboe <axboe@suse.de>
Jens Axboe [Sun, 2 Apr 2006 21:10:32 +0000 (23:10 +0200)]
[PATCH] splice: page stealing needs to wait_on_page_writeback()
Thanks to Andrew for the good explanation of why this is so. akpm writes:
If a page is under writeback and we remove it from pagecache, it's still
going to get written to disk. But the VFS no longer knows about that page,
nor that this page is about to modify disk blocks.
So there might be scenarios in which those
blocks-which-are-about-to-be-written-to get reused for something else.
When writeback completes, it'll scribble on those blocks.
This won't happen in ext2/ext3-style filesystems in normal mode because the
page has buffers and try_to_release_page() will fail.
But ext2 in nobh mode doesn't attach buffers at all - it just sticks the
page in a BIO, finds some new blocks, points the BIO at those blocks and
lets it rip.
While that write IO's in flight, someone could truncate the file. Truncate
won't block on the writeout because the page isn't in pagecache any more.
So truncate will the free the blocks from the file under the page's feet.
Then something else can reallocate those blocks. Then write data to them.
Now, the original write completes, corrupting the filesystem.
Signed-off-by: Jens Axboe <axboe@suse.de>
Jens Axboe [Sun, 2 Apr 2006 21:06:05 +0000 (23:06 +0200)]
[PATCH] splice: export generic_splice_sendpage
Forgot that one, thanks Jeff. Also move the other EXPORT_SYMBOL
to right below the functions.
Signed-off-by: Jens Axboe <axboe@suse.de>
Jens Axboe [Sun, 2 Apr 2006 21:05:41 +0000 (23:05 +0200)]
[PATCH] splice: add a SPLICE_F_MORE flag
This lets userspace indicate whether more data will be coming in a
subsequent splice call.
Signed-off-by: Jens Axboe <axboe@suse.de>
Jens Axboe [Sun, 2 Apr 2006 21:05:09 +0000 (23:05 +0200)]
[PATCH] splice: add comments documenting more of the code
Hopefully this will make Andrew a little more happy.
Signed-off-by: Jens Axboe <axboe@suse.de>
Jens Axboe [Sun, 2 Apr 2006 21:04:46 +0000 (23:04 +0200)]
[PATCH] splice: improve writeback and clean up page stealing
By cleaning up the writeback logic (killing write_one_page() and the manual
set_page_dirty()), we can get rid of ->stolen inside the pipe_buffer and
just keep it local in pipe_to_file().
This also adds dirty page balancing logic and O_SYNC handling.
Signed-off-by: Jens Axboe <axboe@suse.de>
Jens Axboe [Sun, 2 Apr 2006 21:04:21 +0000 (23:04 +0200)]
[PATCH] splice: fix shadow[] filling logic
Clear the entire range, and don't increment pidx or we keep filling
the same position again and again.
Thanks to KAMEZAWA Hiroyuki.
Signed-off-by: Jens Axboe <axboe@suse.de>
Linus Torvalds [Sun, 2 Apr 2006 20:34:00 +0000 (13:34 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (27 commits)
[ARM] 3433/1: ARM: OMAP: 8/8 Update board files
[ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2
[ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2
[ARM] 3430/1: ARM: OMAP: 5/8 Update PM
[ARM] 3429/1: ARM: OMAP: 4/8 Update GPIO
[ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexing
[ARM] 3427/1: ARM: OMAP: 2/8 Update timers
[ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework
[ARM] 3396/2: AT91RM9200 Platform devices update
[ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selection
[ARM] 3393/2: AT91RM9200 LED support
[ARM] 3453/1: Poodle: Correctly set the memory size
[ARM] 3446/1: i.MX: MMC/SD SDHC controller registration for i.MX/MX1 MX1ADS board
[ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1
[ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platform
[ARM] 3450/1: ep93xx: use the ep93xx rtc driver
[ARM] 3452/1: [S3C2410] RX3715 - add nand information
[ARM] 3449/1: [S3C2410] Anubis - fix NAND timings
[ARM] 3448/1: [S3C2410] Settle delay when _enabling_ USB PLL
[ARM] 3442/1: [S3C2410] SMDK: NAND device setup
...
Linus Torvalds [Sun, 2 Apr 2006 20:32:55 +0000 (13:32 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc
* master.kernel.org:/home/rmk/linux-2.6-mmc:
[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1
[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)
Linus Torvalds [Sun, 2 Apr 2006 20:11:25 +0000 (13:11 -0700)]
Merge git://oss.sgi.com:8090/oss/git/xfs-2.6
* git://oss.sgi.com:8090/oss/git/xfs-2.6:
[XFS] Provide XFS support for the splice syscall.
[XFS] Reenable write barriers by default.
[XFS] Make project quota enforcement return an error code consistent with
[XFS] Implement the silent parameter to fill_super, previously ignored.
[XFS] Cleanup comment to remove reference to obsoleted function
Linus Torvalds [Sun, 2 Apr 2006 20:08:49 +0000 (13:08 -0700)]
Merge /pub/scm/linux/kernel/git/perex/alsa
* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (28 commits)
[ALSA] Kconfig SND_SEQUENCER_OSS help text fix
[ALSA] Add Aux input switch control for Aureon Universe
[ALSA] pcxhr - Fix the crash with REV01 board
[ALSA] sound/pci/hda: use create_singlethread_workqueue()
[ALSA] hda-intel - Add support of ATI SB600
[ALSA] cs4281 - Fix the check of timeout in probe
[ALSA] cs4281 - Fix the check of right channel
[ALSA] Test volume resolution of usb audio at initialization
[ALSA] maestro3.c: fix BUG, optimization
[ALSA] HDA/Realtek: multiple input mux definitions and pin mode additions
[ALSA] AdLib FM card driver
[ALSA] Fix / clean up PCM-OSS setup hooks
[ALSA] Clean up PCM codes (take 2)
[ALSA] Tiny clean up of PCM codes
[ALSA] ISA drivers bailing on first !enable[i]
[ALSA] Remove obsolete kfree_nocheck call
[ALSA] Remove obsolete kfree_nocheck call
[ALSA] Add snd-als300 driver for Avance Logic ALS300/ALS300+ soundcards
[ALSA] Add snd-riptide driver for Conexant Riptide chip
[ALSA] hda-codec - Fix noisy output wtih
AD1986A 3stack model
...
Greg Kroah-Hartman [Fri, 31 Mar 2006 23:37:06 +0000 (15:37 -0800)]
[PATCH] sysfs: zero terminate sysfs write buffers
No one should be writing a PAGE_SIZE worth of data to a normal sysfs
file, so properly terminate the buffer.
Thanks to Al Viro for pointing out my supidity here.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Sun, 2 Apr 2006 17:24:57 +0000 (19:24 +0200)]
[PATCH] revert incorrect mutex conversion in hdaps driver
This reverts the mutex conversion that was recently done to the hdaps
driver; this coversion was buggy because the hdaps driver started using
this semaphore in IRQ context, which mutexes do not allow. Easiest
solution for now is to just revert the patch (the patch was part of a
bigger GIT commit,
9a61bf6300533d3b64d7ff29adfec00e596de67d but this
only reverts this one file)
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sun, 2 Apr 2006 20:01:11 +0000 (13:01 -0700)]
Merge /linux/kernel/git/wim/linux-2.6-watchdog
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] at91_wdt.c - Atmel AT91RM9200 watchdog driver
[WATCHDOG] pcwd_usb.c: fix a NULL pointer dereference
[WATCHDOG] pcwd.c sprintf/strcpy fix
[WATCHDOG] pcwd.c general clean-up after patches
[WATCHDOG] pcwd.c add debug info
[WATCHDOG] pcwd.c pcwd_cleanup_module patch
[WATCHDOG] pcwd.c firmware-info patch
[WATCHDOG] pcwd.c control status patch
Linus Torvalds [Sun, 2 Apr 2006 19:58:45 +0000 (12:58 -0700)]
Merge git://git./linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits)
Documentation: fix minor kernel-doc warnings
BUG_ON() Conversion in drivers/net/
BUG_ON() Conversion in drivers/s390/net/lcs.c
BUG_ON() Conversion in mm/slab.c
BUG_ON() Conversion in mm/highmem.c
BUG_ON() Conversion in kernel/signal.c
BUG_ON() Conversion in kernel/signal.c
BUG_ON() Conversion in kernel/ptrace.c
BUG_ON() Conversion in ipc/shm.c
BUG_ON() Conversion in fs/freevxfs/
BUG_ON() Conversion in fs/udf/
BUG_ON() Conversion in fs/sysv/
BUG_ON() Conversion in fs/inode.c
BUG_ON() Conversion in fs/fcntl.c
BUG_ON() Conversion in fs/dquot.c
BUG_ON() Conversion in md/raid10.c
BUG_ON() Conversion in md/raid6main.c
BUG_ON() Conversion in md/raid5.c
Fix minor documentation typo
BFP->BPF in Documentation/networking/tuntap.txt
...
Stefan Richter [Sat, 1 Apr 2006 19:11:41 +0000 (21:11 +0200)]
[PATCH] sbp2: fix spinlock recursion
sbp2util_mark_command_completed takes a lock which was already taken by
sbp2scsi_complete_all_commands. This is a regression in Linux 2.6.15.
Reported by Kristian Harms at
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187394
[ More complete commentary, as response to questions by Andrew: ]
> This changes the call environment for all implementations of
> ->Current_done(). Are they all safe to call under this lock?
Short answer: Yes, trust me. ;-) Long answer:
The done() callbacks are passed on to sbp2 from the SCSI stack along
with each SCSI command via the queuecommand hook. The done() callback
is safe to call in atomic context. So does
Documentation/scsi/scsi_mid_low_api.txt say, and many if not all SCSI
low-level handlers rely on this fact. So whatever this callback does,
it is "self-contained" and it won't conflict with sbp2's internal ORB
list handling. In particular, it won't race with the
sbp2_command_orb_lock.
Moreover, sbp2 already calls the done() handler with
sbp2_command_orb_lock taken in sbp2scsi_complete_all_commands(). I
admit this is ultimately no proof of correctness, especially since this
portion of code introduced the spinlock recursion in the first place and
we didn't realize it since this code's submission before 2.6.15 until
now. (I have learned a lesson from this.)
I stress-tested my patch on x86 uniprocessor with a preemptible SMP
kernel (alas I have no SMP machine yet) and made sure that all code
paths which involve the sbp2_command_orb_lock were gone through multiple
times.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sun, 2 Apr 2006 19:53:57 +0000 (12:53 -0700)]
Merge /pub/scm/linux/kernel/git/mchehab/v4l-dvb
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (49 commits)
V4L/DVB (3667b): cpia2: fix function prototype
V4L/DVB (3702): Make msp3400 routing defines more consistent
V4L/DVB (3700): Remove obsolete commands from tvp5150.c
V4L/DVB (3697): More msp3400 and bttv fixes
V4L/DVB (3696): Previous change for cx2341X boards broke the remote support
V4L/DVB (3693): Fix msp3400c and bttv stereo/mono/bilingual detection/handling
V4L/DVB (3692): Keep experimental SLICED_VBI defines under an #if 0
V4L/DVB (3689): Kconfig: fix VP-3054 Secondary I2C Bus build configuration menu dependencies
V4L/DVB (3673): Fix budget-av CAM reset
V4L/DVB (3672): Fix memory leak in dvr open
V4L/DVB (3671): New module parameter 'tv_standard' (dvb-ttpci driver)
V4L/DVB (3670): Fix typo in comment
V4L/DVB (3669): Configurable dma buffer size for saa7146-based budget dvb cards
V4L/DVB (3653h): Move usb v4l docs into Documentation/video4linux
V4L/DVB (3667a): Fix SAP + stereo mode at msp3400
V4L/DVB (3666): Remove trailing newlines
V4L/DVB (3665): Add new NEC uPD64031A and uPD64083 i2c drivers
V4L/DVB (3663): Fix msp3400c wait time and better audio mode fallbacks
V4L/DVB (3662): Don't set msp3400c-non-existent register
V4L/DVB (3661): Add wm8739 stereo audio ADC i2c driver
...
Linus Torvalds [Sun, 2 Apr 2006 19:51:22 +0000 (12:51 -0700)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/ipath: kbuild infrastructure
IB/ipath: infiniband verbs support
IB/ipath: misc infiniband code, part 2
IB/ipath: misc infiniband code, part 1
IB/ipath: infiniband RC protocol support
IB/ipath: infiniband UC and UD protocol support
IB/ipath: infiniband header files
IB/ipath: layering interfaces used by higher-level driver code
IB/ipath: support for userspace apps using core driver
IB/ipath: sysfs and ipathfs support for core driver
IB/ipath: misc driver support code
IB/ipath: chip initialisation code, and diag support
IB/ipath: support for PCI Express devices
IB/ipath: support for HyperTransport devices
IB/ipath: core driver header files
IB/ipath: core device driver
Linus Torvalds [Sun, 2 Apr 2006 19:49:59 +0000 (12:49 -0700)]
Merge /pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits)
[PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error)
[PATCH] pcmcia: fix pcmcia_device_remove oops
[PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45
[PATCH] pcmcia: pseudo device handling update
[PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present
[PATCH] pcmcia: use bitfield instead of p_state and state
[PATCH] pcmcia: remove unused p_dev->state flags
[PATCH] pcmcia: make pcmcia_release_{io,irq} static
[PATCH] pcmcia: add return value to _config() functions
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
[PATCH] pcmcia: rename pcmcia_device.state
[PATCH] pcmcia: remove unneeded Vcc pseudo setting
[PATCH] pcmcia: remove export of pcmcia_release_configuration
[PATCH] pcmcia: default suspend and resume handling
[PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq
[PATCH] pcmcia: add pcmcia_disable_device
[PATCH] serial_cs: add Merlin U630 IDs
[PATCH] pcmcia: AT91RM9200 Compact Flash driver
[PATCH] pcmcia: socket.functions starts with 1
...
Linus Torvalds [Sun, 2 Apr 2006 19:49:19 +0000 (12:49 -0700)]
Merge /pub/scm/linux/kernel/git/dtor/input
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (26 commits)
Input: add support for Braille devices
Input: synaptics - limit rate to 40pps on Toshiba Protege M300
Input: gamecon - add SNES mouse support
Input: make modalias code respect allowed buffer size
Input: convert /proc handling to seq_file
Input: limit attributes' output to PAGE_SIZE
Input: gameport - fix memory leak
Input: serio - fix memory leak
Input: zaurus keyboard driver updates
Input: i8042 - fix logic around pnp_register_driver()
Input: ns558 - fix logic around pnp_register_driver()
Input: pcspkr - separate device and driver registration
Input: atkbd - allow disabling on X86_PC (if EMBEDDED)
Input: atkbd - disable softrepeat for dumb keyboards
Input: atkbd - fix complaints about 'releasing unknown key 0x7f'
Input: HID - fix duplicate key mapping for Logitech UltraX remote
Input: use kzalloc() throughout the code
Input: fix input_free_device() implementation
Input: initialize serio and gameport at subsystem level
Input: uinput - semaphore to mutex conversion
...
Linus Torvalds [Sun, 2 Apr 2006 19:48:36 +0000 (12:48 -0700)]
Merge /pub/scm/linux/kernel/git/paulus/powerpc
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
[PATCH] powerpc: iSeries needs slb_initialize to be called
powerpc: hook up the splice syscall
[PATCH] powerpc/cell: compile fixes
[PATCH] powerpc: trivial spelling fixes in fault.c
[PATCH] powerpc/pseries: EEH Cleanup
[PATCH] powerpc/pseries: misc lparcfg fixes
[PATCH] powerpc/pseries: fix device name printing, again.
[PATCH] powerpc: Extends HCALL interface for InfiniBand usage
[PATCH] powerpc/pseries: Change H_StudlyCaps to H_SHOUTING_CAPS
[PATCH] powerpc/pseries: print message if EEH recovery fails
[PATCH] powerpc/pseries: mutex lock to serialize EEH event processing
powerpc: converted embedded platforms to use new define_machine support
powerpc: merge machine_check_exception between ppc32 & ppc64
Linus Torvalds [Sun, 2 Apr 2006 19:48:07 +0000 (12:48 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC]: Wire up sys_sync_file_range() into syscall tables.
[SPARC]: Wire up sys_splice() into the syscall tables.
[SPARC64]: Update defconfig.
[SPARC64]: Align address in huge_pte_alloc().
[SPARC64]: Document the instruction checks we do in do_sparc64_fault().
[SPARC64]: Make tsb_sync() mm comparison more precise.
Linus Torvalds [Sun, 2 Apr 2006 19:47:12 +0000 (12:47 -0700)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[NET]: Fully fix the memory leaks in sys_accept().
[NETFILTER]: iptables 32bit compat layer
[NETFILTER]: {ip,nf}_conntrack_netlink: fix expectation notifier unregistration
[NETFILTER]: fix ifdef for connmark support in nf_conntrack_netlink
[NETFILTER]: x_tables: unify IPv4/IPv6 multiport match
[NETFILTER]: x_tables: unify IPv4/IPv6 esp match
[NET]: Fix dentry leak in sys_accept().
[IPSEC]: Kill unused decap state structure
[IPSEC]: Kill unused decap state argument
[NET]: com90xx kmalloc fix
[TG3]: Update driver version and reldate.
[TG3]: Revert "Speed up SRAM access"
Linus Torvalds [Sun, 2 Apr 2006 19:46:35 +0000 (12:46 -0700)]
splice: add SPLICE_F_NONBLOCK flag
It doesn't make the splice itself necessarily nonblocking (because the
actual file descriptors that are spliced from/to may block unless they
have the O_NONBLOCK flag set), but it makes the splice pipe operations
nonblocking.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pavel Pisa [Sun, 2 Apr 2006 18:27:07 +0000 (19:27 +0100)]
[ARM] 3457/1: i.MX: SD/MMC support for i.MX/MX1
Patch from Pavel Pisa
This patch adds support of i.MX/MX1 SD/MMC controller.
It has been significantly redesigned from the original Sascha Hauer's
version to support scatter-gather DMA, to conform to latest Pierre Ossman's
and Russell King's MMC-SD Linux 2.6.x infrastructure.
The handling of all events has been moved to the softirq context
and is designed with no busy-looping in mind. Unfortunately
some controller bugs has to be overcome by limited looping
about 2-20 usec but these are observed only for initial card
recognition phase.
There are still some missing/missed IRQs problems under heavy load.
Help of somebody with access to the full SDHC design information
is probably necessary.
Regenerated against 2.6.16-git-060402 to solve clash with other patches.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Andrew Victor [Sun, 2 Apr 2006 18:18:51 +0000 (19:18 +0100)]
[ARM] 3456/1: AT91RM9200 support for 2.6 (MMC/SD driver)
Patch from Andrew Victor
This patch adds support for the MMC/SD card interface on the Atmel
AT91RM9200 processor.
Original driver was by Nick Randell, but a number of people have
subsequently worked on it. It's currently maintained by Malcolm Noyes.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Sun, 2 Apr 2006 17:44:36 +0000 (10:44 -0700)]
ppc64: actually add sys_splice() to the system call table
(We'd only added the number, which meant that actually trying
to use splice just went off into la-la-land)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Victor [Tue, 14 Mar 2006 09:11:04 +0000 (11:11 +0200)]
[WATCHDOG] at91_wdt.c - Atmel AT91RM9200 watchdog driver
Watchdog driver for the Atmel AT91RM9200 processor.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Adrian Bunk [Fri, 10 Mar 2006 18:04:38 +0000 (19:04 +0100)]
[WATCHDOG] pcwd_usb.c: fix a NULL pointer dereference
The Coverity checker noted that this resulted in a NULL pointer
reference if we were coming from
if (usb_pcwd == NULL) {
printk(KERN_ERR PFX "Out of memory\n");
goto error;
}
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Wim Van Sebroeck [Thu, 2 Mar 2006 19:05:16 +0000 (20:05 +0100)]
[WATCHDOG] pcwd.c sprintf/strcpy fix
change sprintf(pcwd_private.fw_ver_str, "ERROR");
to strcpy... as pointed out by Andrew Morton.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Wim Van Sebroeck [Sun, 12 Feb 2006 16:44:57 +0000 (17:44 +0100)]
[WATCHDOG] pcwd.c general clean-up after patches
removal of includes (since we don't use kmalloc and
TASK_INTERRUPTABLE anymore).
Addition of missing commands.
Printk that lets the user know when the module was
unloaded.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Sun, 12 Feb 2006 16:12:55 +0000 (17:12 +0100)]
[WATCHDOG] pcwd.c add debug info
Add debugging info for the pcwd.c module.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>