OSDN Git Service
Linux Build Service Account [Sat, 10 Dec 2016 03:59:28 +0000 (19:59 -0800)]
Merge "power_supply: Add BOOST_CURRENT property"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:27 +0000 (19:59 -0800)]
Merge "msm: ipa3: check the rx_door_bell value on disable"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:26 +0000 (19:59 -0800)]
Merge "qpnp-fg-gen3: Add support for PMFALCON in Fuel Gauge"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:25 +0000 (19:59 -0800)]
Merge "ASoC: wcd934x-dsp-cntl: fix the reset sequence"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:25 +0000 (19:59 -0800)]
Merge "include: clock: remove ifdef from header file"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:24 +0000 (19:59 -0800)]
Merge "ASoC: qdsp6v2: prevent null pointer dereference for _vol_cmds"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:23 +0000 (19:59 -0800)]
Merge "msm: thermal: Notify LMH DCVSh driver after freq mitigation request"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:21 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Specify coresight trace ID for msm8998"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:21 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Add GPU coresight properties for msm8998"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:20 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: update wcn3990 node for msm8998 interposer"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:19 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Attach device memory to lpass iommu on msmfalcon"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:15 +0000 (19:59 -0800)]
Merge "msm: msm_bus: Reverse QoS Clocks Disabling Order"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:13 +0000 (19:59 -0800)]
Merge "soc: qcom: pil: Use NULL check of resource pointer for restart register"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:12 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Add pinctrl configuration for PMFALCOM L6/9/19"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:12 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Add missing properties for USB node for msmfalcon"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:10 +0000 (19:59 -0800)]
Merge "defconfig: Add missing features for HW Encryption support"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:10 +0000 (19:59 -0800)]
Merge "defconfig: msm: msm8998: enable LCDB driver"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:09 +0000 (19:59 -0800)]
Merge "media: dvb-core: Add feed state check before stop dvbdemux feed"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:08 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Add VOL_UP node for MSMFALCON and interposer"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:07 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Enable core hang detect feature on msmfalcon"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:07 +0000 (19:59 -0800)]
Merge "phy: qcom-ufs: Modify the vdd-phy min-max range"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:05 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Specify the WLED interrupts properly for pmi8998/pm2falcon"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:05 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Add PM support for msmfalcon"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:03 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Update clock mmss node for MSMfalcon/Triton"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:03 +0000 (19:59 -0800)]
Merge "msm-core: use get_user() API to read userspace data/settings"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:02 +0000 (19:59 -0800)]
Merge "ARM: dts: msm: Modify QRD interposer dts file for msm8998"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:01 +0000 (19:59 -0800)]
Merge "ASoc: msm: Add changes to support multiple meta key value pairs"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:00 +0000 (19:59 -0800)]
Merge "iommu: io-pgtable-arm: Use correct bitmask for pgd entry"
Linux Build Service Account [Sat, 10 Dec 2016 03:59:00 +0000 (19:59 -0800)]
Merge "iommu: iommu-debug: Allow full dma_addr_t sized address for atos"
Meng Wang [Mon, 28 Nov 2016 09:25:20 +0000 (17:25 +0800)]
include: clock: remove ifdef from header file
As audio-ext-clk.h is finally included in device tree and
and using ifdef results in compilation failure. Delete
ifdef from audio-ext-clk.h.
CRs-Fixed:
1090500
Change-Id: Ib6f715c3f606770e7e0b1f0f84ab50e442398cd0
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Ashay Jaiswal [Wed, 7 Dec 2016 05:51:32 +0000 (11:21 +0530)]
qpnp-fg-gen3: Add support for PMFALCON in Fuel Gauge
Add support of PMFALCON PMIC in FG driver. PMFALCON
FG core uses same SRAM map as PMI8998v2.0.
While at it, add workaround flag variable to keep track
of all hardware specific workarounds.
CRs-Fixed:
1096793
Change-Id: I8ba73276fd30f6eaf935ed77b75601f1322c0ba6
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Harshdeep Dhatt [Wed, 23 Nov 2016 23:06:06 +0000 (16:06 -0700)]
ARM: dts: msm: Specify coresight trace ID for msm8998
Specify the graphics coresight trace ID in the device tree
file.
Change-Id: I30a10a63b320cd3cb6d7cc4ef2fba423f697a66f
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
Lokesh Batra [Tue, 8 Mar 2016 13:40:03 +0000 (05:40 -0800)]
ARM: dts: msm: Add GPU coresight properties for msm8998
Add properties in the GPU device tree for coresight. Define GPU
name and its funnel connections.
CR-fixed: 988516
Change-Id: Ibf2e369c2a4732ebc7471ee103bc8d5d934247ec
Signed-off-by: Lokesh Batra <lbatra@codeaurora.org>
Skylar Chang [Tue, 29 Nov 2016 21:36:24 +0000 (13:36 -0800)]
msm: ipa3: check the rx_door_bell value on disable
In WDI2.0, seeing some issue about rdy_ring_rp_va
is not equal to rdy_comp_ring_wp_va because wlan-fw
still update the doorbell after ipa host-driver
issue the CH_DISABLE cmd to ipa-uc. The fix is
to compare rdy_comp_ring_wp_va and rx_door_bell
values instead.
Change-Id: Ibe57c7d5ba9e45260c12528910f173e347259d7c
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Ram Chandrasekar [Wed, 23 Nov 2016 21:39:13 +0000 (14:39 -0700)]
msm: thermal: Notify LMH DCVSh driver after freq mitigation request
LMH DCVSh hardware doesn't generate a debug interrupt, when HLOS
CPU frequency cap is the only throttling value coming to the hardware
aggregator logic. The LMH DCVSh requires atleast one of the hardware
algorithm to throttle to generate a debug interrupt. So there will be
a case where, LMH DCVS driver won't notify scheduler about the
throttling frequency if HLOS is the only reason for throttling.
LMH DCVSh driver now exposes a new API, to trigger the frequency polling
loop. KTM is updated to use this API to trigger the LMH DCVSh polling,
whenever there is a new software frequency cap. This will ensure that
the LMH DCVSh will notify the scheduler even if software is the only
throttling reason.
Change-Id: I92b1bd9a5efc9810eea721b088dff1bd6eef3838
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Harry Yang [Mon, 5 Dec 2016 17:58:12 +0000 (09:58 -0800)]
power_supply: Add BOOST_CURRENT property
This property will be used to indicate to the boost current
after the boost is turned on.
CRs-Fixed:
1095917
Change-Id: Ie667fa49c4a8e8c008e8866f655e3bbe3e69e156
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Ram Chandrasekar [Wed, 23 Nov 2016 21:21:47 +0000 (14:21 -0700)]
msm: lmh_dcvsh: Support new API to notify scheduler
HLOS can place a mitigation frequency via the LMH DCVSh hardware using
the software cap register and this request doesn't trigger a debug
interrupt. Thus, this frequency mitigation change will not result in
scheduler being notified by LMH DCVSh driver.
Introduce a new API in LMH DCVSh driver, that can be used by other
drivers to trigger the scheduler notification. This API and the
interrupt handler follows the same code path to poll and notify the
scheduler.
Change-Id: Iefcdb57ff598ecb1bafc535958684f75b1f6e645
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Rupesh Tatiya [Mon, 21 Nov 2016 07:26:36 +0000 (12:56 +0530)]
ARM: dts: msm: update wcn3990 node for msm8998 interposer
Disable qca, wcn3990 bluetooth node to avoid failure in bootup.
Change-Id: I7c6700a44c45360acf8aebc0ab9264c2e08abc8f
Signed-off-by: Rupesh Tatiya <rtatiya@codeaurora.org>
Lokesh Batra [Wed, 23 Mar 2016 18:59:12 +0000 (11:59 -0700)]
msm: kgsl: Add trace ID support for graphics coresight
Add the support for trace ID for coresight. This ID is
will be defined in the respective device tree file.
Change-Id: I78ba05ed05b54fdc0f4d4f55c468f90f39c821f1
Signed-off-by: Lokesh Batra <lbatra@codeaurora.org>
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
Vijayavardhan Vennapusa [Tue, 6 Dec 2016 12:37:32 +0000 (18:07 +0530)]
ARM: dts: msm: Attach device memory to lpass iommu on msmfalcon
In order to share the usb audio qmi device iova with lpass usb audio
driver, attach usb audio qmi device to lpass q6 iommu using sid 6.
Change-Id: I6b3c9b49ac973f2472391b3f702908212e3f6e7d
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Charan Teja Reddy [Thu, 1 Dec 2016 10:22:12 +0000 (15:52 +0530)]
ARM: dts: msm: update the smmu device node configuration for msmfalcon
Update the SMMU device node configuration for correct operation of SMMU
on msmfalcon.
Change-Id: I29fa8f488df800d38f6403646e58a19e555ba1cd
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Ashay Jaiswal [Wed, 7 Dec 2016 11:09:53 +0000 (16:39 +0530)]
defconfig: msm: msm8998: enable LCDB driver
LCDB driver exposes regulators to control the positive and
negative voltage bias for the LCD display panel. It also
allows configurability for the various bias-voltage parameters.
CRs-Fixed:
1074468
Change-Id: I68958c5ecfb71a11f346c5c46884948e4b36eea0
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Anirudh Ghayal [Wed, 7 Dec 2016 10:24:32 +0000 (15:54 +0530)]
ARM: dts: msm: Add pinctrl configuration for PMFALCOM L6/9/19
BT and WLAN vote for the regulator-mode via pinctrl. Add
support for this.
Change-Id: I95158cce1b20778547615141ffbbb7d81d5e10a1
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Gaurav Kohli [Tue, 6 Dec 2016 06:11:39 +0000 (11:41 +0530)]
soc: qcom: pil: Use NULL check of resource pointer for restart register
In failure case pointer to resource for restart register may be used while
it is uninitialized. So use proper NULL check for the same.
Change-Id: I3fc77b72e825f4b11724808239eea16aa126de42
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
AnilKumar Chimata [Tue, 6 Dec 2016 13:07:16 +0000 (18:37 +0530)]
defconfig: Add missing features for HW Encryption support
Enable SCSI_UFS_QCOM_ICE for msmfalcon_32 which is required
for hardware encryption.
Change-Id: I6f9afca5bebd5ad0745b064bb7d1a33f78fe6941
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
AnilKumar Chimata [Wed, 7 Dec 2016 09:21:13 +0000 (14:51 +0530)]
defconfig: Enable ext4 ICE encryption for msmfalcon_32
Enable EXT4_FS_ICE_ENCRYPTION feature for msmfalcon_32
to use ICE for FBE.
Change-Id: I991f3550720526b097c009dc852e9caaabf4860b
Signed-off-by: AnilKumar Chimata <anilc@codeaurora.org>
Vijayavardhan Vennapusa [Wed, 30 Nov 2016 09:58:40 +0000 (15:28 +0530)]
ARM: dts: msm: Add missing properties for USB node for msmfalcon
Add missing required properties for USB node for msmfalcon for
USB functionality to be working.
Change-Id: I602cac95616da34ffe6462c8cf3af85ce973085b
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Asutosh Das [Mon, 5 Dec 2016 06:11:40 +0000 (11:41 +0530)]
phy: qcom-ufs: Modify the vdd-phy min-max range
There are 2 issues with setting the vdd-phy voltage:
1. The min & max range that's defined is 1v, whereas
0.925 (+/- 5%) is the required voltage. A range of
0.8v to 0.925v would suffice.
2. This defined range is over-ridden with the current
rail-voltage. This assumes that some consumer has
set the regulator to the correct voltage.
This change corrects the defined min/max range to
0.8v-0.925v for vdd-phy.
It also removes the code that's causing [2].
CRs-fixed:
1095116
Change-Id: I943bc4f38385036b21c1f9a2e479d6e94ac12813
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Anirudh Ghayal [Wed, 7 Dec 2016 08:14:01 +0000 (13:44 +0530)]
ARM: dts: msm: Add VOL_UP node for MSMFALCON and interposer
PM2FALCON GPIO 7 is connected to VOL_UP key. Add the
PMIC and GPIO key configuration for GPIO 7.
Change-Id: Ie1dcc85f579e0b9817a104be86bbb9e91771b15c
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Udaya Mallavarapu [Wed, 7 Dec 2016 07:46:21 +0000 (13:16 +0530)]
media: dvb-core: Add feed state check before stop dvbdemux feed
Add feed state check whether any filter is configured on dvbdemux
feed before feed stop is called. If any filter is started the feed
status should be set to DMX_STATE_GO.
CRs-Fixed:
1090466
Change-Id: If9e87065bb9fb82befb398f2a3a0d0da2f76efa5
Signed-off-by: Udaya Mallavarapu <udaym@codeaurora.org>
Venkatesh Yadav Abbarapu [Thu, 1 Sep 2016 05:19:48 +0000 (10:49 +0530)]
ARM: dts: msm: Enable core hang detect feature on msmfalcon
Add core hang detect node for msmfalcon which enables the
core hang detect feature. Enable the same for msmtriton
also.
Change-Id: I108451bae429c8e4c858f7f549c4202f3d59a6d2
Signed-off-by: Venkatesh Yadav Abbarapu <vabbar@codeaurora.org>
Raju P.L.S.S.S.N [Thu, 4 Aug 2016 13:47:31 +0000 (19:17 +0530)]
ARM: dts: msm: Add PM support for msmfalcon
Add initial PM configuration necessary for SPM, LPM, MPM,
RPM stats to support msmfalcon.
Change-Id: Ia1e83fe40710e80156b049982e9a8421d04902a1
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Mohammed Khajapasha [Tue, 28 Jun 2016 06:25:34 +0000 (11:55 +0530)]
msm-core: use get_user() API to read userspace data/settings
Currently userspace data is getting accessed directly
and leading to crash, So use get_user() API to copy
userspace data/settings to kernel space.
Change-Id: I3a75ec9503d8207829640bf88e1c3160bf72c9f0
Signed-off-by: Mohammed Khajapasha <mkhaja@codeaurora.org>
Zhenhua Huang [Wed, 30 Nov 2016 10:29:15 +0000 (18:29 +0800)]
ARM: dts: msm: Modify QRD interposer dts file for msm8998
Update regulators for clocks and usb phy.
CRs-Fixed:
1096674
Change-Id: Ib205ccebaec612fd9d1d6bb1a02a4f14be8f21c1
Signed-off-by: Zhenhua Huang <zhenhuah@codeaurora.org>
Taniya Das [Mon, 5 Dec 2016 13:18:31 +0000 (18:48 +0530)]
ARM: dts: msm: Update clock mmss node for MSMfalcon/Triton
Modify the clock_mmss dummy clock to use the real clock controller for MMSS
clock controller client. Use dummy clocks for RUMI platform.
Change-Id: I1ec9fe1d473be79ec0a54f2b8cacfc891f5be5bb
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Taniya Das [Mon, 5 Dec 2016 10:17:59 +0000 (15:47 +0530)]
defconfig: Add support to enable MMCC clocks
Multimedia clock controller is required to be enabled for clocks
supported by multimedia clock controller clients.
Change-Id: I7fa2748c113870a20f0e01ae98faf391d195003c
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Linux Build Service Account [Wed, 7 Dec 2016 05:03:17 +0000 (21:03 -0800)]
Merge "leds: qpnp-wled: Fix the APIs to read/write WLED registers"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:16 +0000 (21:03 -0800)]
Merge "thermal-core: Use rcu for accessing sensor list"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:15 +0000 (21:03 -0800)]
Merge "msm: sensor: Validationg function pointers before using them"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:14 +0000 (21:03 -0800)]
Merge "msm: camera: Notify TZ App about changes of the HW security mode"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:13 +0000 (21:03 -0800)]
Merge "msm: ipa: enable suspend pipe for ODU"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:13 +0000 (21:03 -0800)]
Merge "input: misc: add condition check for ddic reset"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:12 +0000 (21:03 -0800)]
Merge "input: ft5x06_ts: fix uninitialized references in ft5x06_ts"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:11 +0000 (21:03 -0800)]
Merge "coresight: fix 32-bit compilation issues"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:10 +0000 (21:03 -0800)]
Merge "ARM: dts: msm: Update GPUCC clock frequencies for MSMtriton"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:09 +0000 (21:03 -0800)]
Merge "Revert "wil6210: prevent XTAL off in device bootloader""
Linux Build Service Account [Wed, 7 Dec 2016 05:03:08 +0000 (21:03 -0800)]
Merge "clk: Add vdd_class support for handoff and use_max_uV"
Linux Build Service Account [Wed, 7 Dec 2016 05:03:07 +0000 (21:03 -0800)]
Merge "ASoC: msm8998: Add support for HiFi amplifier"
Bhalchandra Gajare [Wed, 7 Dec 2016 01:30:36 +0000 (17:30 -0800)]
ASoC: wcd934x-dsp-cntl: fix the reset sequence
Currently, whenever the codec DSP is reset, the CPAR hardware block
is not reset. This causes failure to boot DSP in good state. Update
CPAR reset sequence to ensure CPAR is put to reset when not in use.
CRs-fixed:
1091032
Change-Id: I77fea396fda6ee0eaaf0c68b11cf90f268ac1481
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Bhalchandra Gajare [Wed, 7 Dec 2016 01:34:35 +0000 (17:34 -0800)]
ASoC: wcd-spi: fix clock disable request during shutdown
It is possible that there could be pending delayed request to disable
the clock while the manager driver has already raised shutdown event.
In such cases, the delayed clock disable request will be made after
shutdown, resulting in unclocked access on the SPI bus. Fix this by
intercepting the shutdown event to flush the clock votes and disable
the clock.
CRs-Fixed:
1091032
Change-Id: I53a3a9aa540c10932eed7fa29ce7c6050504a9a0
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Linux Build Service Account [Tue, 6 Dec 2016 22:33:56 +0000 (14:33 -0800)]
Merge "soc: qcom: Check err_ready before returning from subsys_generic_handler()"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:56 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add BT node for QRD interposer msm8998"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:55 +0000 (14:33 -0800)]
Merge "soc: qcom: implement notify_tx_abort() callback"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:53 +0000 (14:33 -0800)]
Merge "soc: qcom: fix to avoid invalid memory access"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:52 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add the LCDB device node for PM2FALCON"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:51 +0000 (14:33 -0800)]
Merge "defconfig: msm: falcon: enable LCDB driver"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:50 +0000 (14:33 -0800)]
Merge "Revert "input: powerkey: don't send dummy release event""
Linux Build Service Account [Tue, 6 Dec 2016 22:33:49 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Add device tree for msmfalcon CDP, MTP & RCM"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:48 +0000 (14:33 -0800)]
Merge "iommu: dma-mapping-fast: add support for DMA sync single APIs"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:47 +0000 (14:33 -0800)]
Merge "clk: qcom: Add additional delay while enabling votable clocks"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:46 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: set dcs commands in hs for mode switch in jdi panel"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:43 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: update micbias regulator in msmfalcon"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:42 +0000 (14:33 -0800)]
Merge "msm: camera: flash: Validate the power setting size"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:41 +0000 (14:33 -0800)]
Merge "msm: camera: sensor: Validate eeprom_name string length"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:40 +0000 (14:33 -0800)]
Merge "msm: camera: eeprom: Validate the power setting size"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:39 +0000 (14:33 -0800)]
Merge "msm: camera: sensor: Add boundary check for cci master"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:36 +0000 (14:33 -0800)]
Merge "regulator: msm_gfx_ldo: Fix the CX voting logic"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:36 +0000 (14:33 -0800)]
Merge "regulator: msm_gfx_ldo: Fix invalid memory accesses"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:35 +0000 (14:33 -0800)]
Merge "regulator: msm_gfx_ldo: Enable CPR sensors in LDO bypass mode"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:35 +0000 (14:33 -0800)]
Merge "regulator: msm_gfx_ldo: Add a property to adjust the open-loop voltage"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:34 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: add mdss dsi nodes for msm8998 v2.1 interposer"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:30 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: update resource id of SSC regulator of PM2FALCON"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:30 +0000 (14:33 -0800)]
Merge "soc: qcom: Add support to restart user PD"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:29 +0000 (14:33 -0800)]
Merge "defconfig: Enable config IP_NF_MATCH_RPFILTER"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:28 +0000 (14:33 -0800)]
Merge "clk: qcom: Add RCG support for DP pixel source"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:27 +0000 (14:33 -0800)]
Merge "msm: kgsl: Dump VBIF and few GPU registers before crash dumper"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:26 +0000 (14:33 -0800)]
Merge "mpm-of: Support multiple mpm pin mapping to same gic interrupt"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:26 +0000 (14:33 -0800)]
Merge "soc: qcom: Reduce halt acknowledgment timeout for mss axi port"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:25 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: add the smmu nodes for msmtriton"
Linux Build Service Account [Tue, 6 Dec 2016 22:33:24 +0000 (14:33 -0800)]
Merge "ARM: dts: msm: Enable PWM, Haptics and Flash for PM2FALCON"