OSDN Git Service
Steven Rostedt (VMware) [Thu, 9 May 2019 19:32:05 +0000 (15:32 -0400)]
ftrace/x86: Remove mcount support
There's two methods of enabling function tracing in Linux on x86. One is
with just "gcc -pg" and the other is "gcc -pg -mfentry". The former will use
calls to a special function "mcount" after the frame is set up in all C
functions. The latter will add calls to a special function called "fentry"
as the very first instruction of all C functions.
At compile time, there is a check to see if gcc supports, -mfentry, and if
it does, it will use that, because it is more versatile and less error prone
for function tracing.
Starting with v4.19, the minimum gcc supported to build the Linux kernel,
was raised to version 4.6. That also happens to be the first gcc version to
support -mfentry. Since on x86, using gcc versions from 4.6 and beyond will
unconditionally enable the -mfentry, it will no longer use mcount as the
method for inserting calls into the C functions of the kernel. This means
that there is no point in continuing to maintain mcount in x86.
Remove support for using mcount. This makes the code less complex, and will
also allow it to be simplified in the future.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Fri, 10 May 2019 16:05:46 +0000 (12:05 -0400)]
ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
When DYNAMIC_FTRACE is enabled in the kernel, all the functions that can be
traced by the function tracer have a "nop" placeholder at the start of the
function. When function tracing is enabled, the nop is converted into a call
to the tracing infrastructure where the functions get traced. This also
allows for specifying specific functions to trace, and a lot of
infrastructure is built on top of this.
When DYNAMIC_FTRACE is not enabled, all the functions have a call to the
ftrace trampoline. A check is made to see if a function pointer is the
ftrace_stub or not, and if it is not, it calls the function pointer to trace
the code. This adds over 10% overhead to the kernel even when tracing is
disabled.
When an architecture supports DYNAMIC_FTRACE there really is no reason to
use the static tracing. I have kept non DYNAMIC_FTRACE available in x86 so
that the generic code for non DYNAMIC_FTRACE can be tested. There is no
reason to support non DYNAMIC_FTRACE for both x86_64 and x86_32. As the non
DYNAMIC_FTRACE for x86_32 does not even support fentry, and we want to
remove mcount completely, there's no reason to keep non DYNAMIC_FTRACE
around for x86_32.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Wed, 20 Mar 2019 17:26:17 +0000 (10:26 -0700)]
tracing: Simplify "if" macro code
Peter Zijlstra noticed that with CONFIG_PROFILE_ALL_BRANCHES, the "if"
macro converts the conditional to an array index. This can cause GCC
to create horrible code. When there are nested ifs, the generated code
uses register values to encode branching decisions.
Josh Poimboeuf found that replacing the define "if" macro from using
the condition as an array index and incrementing the branch statics
with an if statement itself, reduced the asm complexity and shrinks the
generated code quite a bit.
But this can be simplified even further by replacing the internal if
statement with a ternary operator.
Link: https://lkml.kernel.org/r/20190307174802.46fmpysxyo35hh43@treble
Link: http://lkml.kernel.org/r/CAHk-=wiALN3jRuzARpwThN62iKd476Xj-uom+YnLZ4=eqcz7xQ@mail.gmail.com
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Srivatsa S. Bhat (VMware) [Tue, 29 Jan 2019 01:55:53 +0000 (17:55 -0800)]
tracing: Fix documentation about disabling options using trace_options
To disable a tracing option using the trace_options file, the option
name needs to be prefixed with 'no', and not suffixed, as the README
states. Fix it.
Link: http://lkml.kernel.org/r/154872690031.47356.5739053380942044586.stgit@srivatsa-ubuntu
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Gustavo A. R. Silva [Tue, 15 Jan 2019 04:34:08 +0000 (22:34 -0600)]
tracing: Replace kzalloc with kcalloc
Replace kzalloc() function with its 2-factor argument form, kcalloc().
This patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a, b, gfp)
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20190115043408.GA23456@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Elazar Leibovich [Mon, 31 Dec 2018 11:58:37 +0000 (13:58 +0200)]
tracing: Fix partial reading of trace event's id file
When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.
Reading a single byte, and then the next byte would result EOF.
While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399
This code was mentioned as problematic in
commit
cd458ba9d5a5
("tracing: Do not (ab)use trace_seq in event_id_read()")
An example C code that show this bug is:
#include <stdio.h>
#include <stdint.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
int main(int argc, char **argv) {
if (argc < 2)
return 1;
int fd = open(argv[1], O_RDONLY);
char c;
read(fd, &c, 1);
printf("First %c\n", c);
read(fd, &c, 1);
printf("Second %c\n", c);
}
Then run with, e.g.
sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id
You'll notice you're getting the first character twice, instead of the
first two characters in the id file.
Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com
Cc: Orit Wasserman <orit.was@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
23725aeeab10b ("ftrace: provide an id file for each event")
Signed-off-by: Elazar Leibovich <elazar@lightbitslabs.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Anders Roxell [Fri, 30 Nov 2018 14:56:22 +0000 (15:56 +0100)]
tracing: Allow RCU to run between postponed startup tests
When building a allmodconfig kernel for arm64 and boot that in qemu,
CONFIG_FTRACE_STARTUP_TEST gets enabled and that takes time so the
watchdog expires and prints out a message like this:
'watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1]'
Depending on what the what test gets called from init_trace_selftests()
it stays minutes in the loop.
Rework so that function cond_resched() gets called in the
init_trace_selftests loop.
Link: http://lkml.kernel.org/r/20181130145622.26334-1-anders.roxell@linaro.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Colin Ian King [Fri, 9 Nov 2018 13:23:12 +0000 (13:23 +0000)]
tracing: Fix white space issues in parse_pred() function
Trivial fix to clean up an indentation issue, a whole chunk of code
has an extra space in the indentation.
Link: http://lkml.kernel.org/r/20181109132312.20994-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rasmus Villemoes [Wed, 20 Mar 2019 08:17:57 +0000 (09:17 +0100)]
tracing: Eliminate const char[] auto variables
Automatic const char[] variables cause unnecessary code
generation. For example, the this_mod variable leads to
3f04: 48 b8 5f 5f 74 68 69 73 5f 6d movabs $0x6d5f736968745f5f,%rax # __this_m
3f0e: 4c 8d 44 24 02 lea 0x2(%rsp),%r8
3f13: 48 8d 7c 24 10 lea 0x10(%rsp),%rdi
3f18: 48 89 44 24 02 mov %rax,0x2(%rsp)
3f1d: 4c 89 e9 mov %r13,%rcx
3f20: b8 65 00 00 00 mov $0x65,%eax # e
3f25: 48 c7 c2 00 00 00 00 mov $0x0,%rdx
3f28: R_X86_64_32S .rodata.str1.1+0x18d
3f2c: be 48 00 00 00 mov $0x48,%esi
3f31: c7 44 24 0a 6f 64 75 6c movl $0x6c75646f,0xa(%rsp) # odul
3f39: 66 89 44 24 0e mov %ax,0xe(%rsp)
i.e., the string gets built on the stack at runtime. Similar code can be
found for the other instances I'm replacing here. Putting the string
in .rodata reduces the combined .text+.rodata size and saves time and
stack space at runtime.
The simplest fix, and what I've done for the this_mod case, is to just
make the variable static.
However, for the "<faulted>" case where the same string is used twice,
that prevents the linker from merging those two literals, so instead use
a macro - that also keeps the two instances automatically in
sync (instead of only the compile-time strlen expression).
Finally, for the two runs of spaces, it turns out that the "build
these strings on the stack" is not the worst part of what gcc does -
it turns print_func_help_header_irq() into "if (tgid) { /*
print_event_info + five seq_printf calls */ } else { /* print
event_info + another five seq_printf */}". Taking inspiration from a
suggestion from Al Viro, use %.*s to make snprintf either stop after
the first two spaces or print the whole string. As a bonus, the
seq_printfs now fit on single lines (at least, they are not longer
than the existing ones in the function just above), making it easier
to see that the ascii art lines up.
x86-64 defconfig + CONFIG_FUNCTION_TRACER:
$ scripts/stackdelta /tmp/stackusage.{0,1}
./kernel/trace/ftrace.c ftrace_mod_callback 152 136 -16
./kernel/trace/trace.c trace_default_header 56 32 -24
./kernel/trace/trace.c tracing_mark_raw_write 96 72 -24
./kernel/trace/trace.c tracing_mark_write 104 80 -24
bloat-o-meter
add/remove: 1/0 grow/shrink: 0/4 up/down: 14/-375 (-361)
Function old new delta
this_mod - 14 +14
ftrace_mod_callback 577 542 -35
tracing_mark_raw_write 444 374 -70
tracing_mark_write 616 540 -76
trace_default_header 600 406 -194
Link: http://lkml.kernel.org/r/20190320081757.6037-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Yangtao Li [Thu, 1 Nov 2018 15:46:40 +0000 (11:46 -0400)]
ring-buffer: Fix mispelling of Calculate
It's not "Caculate".
Link: http://lkml.kernel.org/r/20181101154640.23162-1-tiny.windzz@gmail.com
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Tue, 7 May 2019 13:56:02 +0000 (22:56 +0900)]
tracing: probeevent: Fix to make the type of $comm string
Fix to make the type of $comm "string". If we set the other type to $comm
argument, it shows meaningless value or wrong data. Currently probe events
allow us to set string array type (e.g. ":string[2]"), or other digit types
like x8 on $comm. But since clearly $comm is just a string data, it should
not be fetched by other types including array.
Link: http://lkml.kernel.org/r/155723736241.9149.14582064184468574539.stgit@devnote2
Cc: Andreas Ziegler <andreas.ziegler@fau.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
533059281ee5 ("tracing: probeevent: Introduce new argument fetching code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Tue, 7 May 2019 13:55:52 +0000 (22:55 +0900)]
tracing: probeevent: Do not accumulate on ret variable
Do not accumulate strlen result on "ret" local variable, because
it is accumulated on "total" local variable for array case.
Link: http://lkml.kernel.org/r/155723735237.9149.3192150444705457531.stgit@devnote2
Fixes:
40b53b771806 ("tracing: probeevent: Add array type support")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Tue, 7 May 2019 13:55:41 +0000 (22:55 +0900)]
tracing: uprobes: Re-enable $comm support for uprobe events
Since commit
533059281ee5 ("tracing: probeevent: Introduce new
argument fetching code") dropped the $comm support from uprobe
events, this re-enables it.
For $comm support, uses strlcpy() instead of strncpy_from_user()
to copy current task's comm. Because it is in the kernel space,
strncpy_from_user() always fails to copy the comm.
This also uses strlen() instead of strnlen_user() to measure the
length of the comm.
Note that this uses -ECOMM as a token value to fetch the comm
string. If the user-space pointer points -ECOMM, it will be
translated to task->comm.
Link: http://lkml.kernel.org/r/155723734162.9149.4042756162201097965.stgit@devnote2
Fixes:
533059281ee5 ("tracing: probeevent: Introduce new argument fetching code")
Reported-by: Andreas Ziegler <andreas.ziegler@fau.de>
Acked-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Peter Zijlstra [Wed, 1 May 2019 13:11:17 +0000 (15:11 +0200)]
ftrace/x86_64: Emulate call function while updating in breakpoint handler
Nicolai Stange discovered[1] that if live kernel patching is enabled, and the
function tracer started tracing the same function that was patched, the
conversion of the fentry call site during the translation of going from
calling the live kernel patch trampoline to the iterator trampoline, would
have as slight window where it didn't call anything.
As live kernel patching depends on ftrace to always call its code (to
prevent the function being traced from being called, as it will redirect
it). This small window would allow the old buggy function to be called, and
this can cause undesirable results.
Nicolai submitted new patches[2] but these were controversial. As this is
similar to the static call emulation issues that came up a while ago[3].
But after some debate[4][5] adding a gap in the stack when entering the
breakpoint handler allows for pushing the return address onto the stack to
easily emulate a call.
[1] http://lkml.kernel.org/r/
20180726104029.7736-1-nstange@suse.de
[2] http://lkml.kernel.org/r/
20190427100639.15074-1-nstange@suse.de
[3] http://lkml.kernel.org/r/
3cf04e113d71c9f8e4be95fb84a510f085aa4afa.
1541711457.git.jpoimboe@redhat.com
[4] http://lkml.kernel.org/r/CAHk-=wh5OpheSU8Em_Q3Hg8qw_JtoijxOdPtHru6d+5K8TWM=A@mail.gmail.com
[5] http://lkml.kernel.org/r/CAHk-=wjvQxY4DvPrJ6haPgAa6b906h=MwZXO6G8OtiTGe=N7_w@mail.gmail.com
[
Live kernel patching is not implemented on x86_32, thus the emulate
calls are only for x86_64.
]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes:
b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ Changed to only implement emulated calls for x86_64 ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Peter Zijlstra [Wed, 1 May 2019 13:11:17 +0000 (15:11 +0200)]
x86_64: Allow breakpoints to emulate call instructions
In order to allow breakpoints to emulate call instructions, they need to push
the return address onto the stack. The x86_64 int3 handler adds a small gap
to allow the stack to grow some. Use this gap to add the return address to
be able to emulate a call instruction at the breakpoint location.
These helper functions are added:
int3_emulate_jmp(): changes the location of the regs->ip to return there.
(The next two are only for x86_64)
int3_emulate_push(): to push the address onto the gap in the stack
int3_emulate_call(): push the return address and change regs->ip
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes:
b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ Modified to only work for x86_64 and added comment to int3_emulate_push() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Josh Poimboeuf [Fri, 30 Nov 2018 18:39:17 +0000 (12:39 -0600)]
x86_64: Add gap to int3 to allow for call emulation
To allow an int3 handler to emulate a call instruction, it must be able to
push a return address onto the stack. Add a gap to the stack to allow the
int3 handler to push the return address and change the return from int3 to
jump straight to the emulated called function target.
Link: http://lkml.kernel.org/r/20181130183917.hxmti5josgq4clti@treble
Link: http://lkml.kernel.org/r/20190502162133.GX2623@hirez.programming.kicks-ass.net
[
Note, this is needed to allow Live Kernel Patching to not miss calling a
patched function when tracing is enabled. -- Steven Rostedt
]
Cc: stable@vger.kernel.org
Fixes:
b700e7f03df5 ("livepatch: kernel: add support for live patching")
Tested-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Douglas Anderson [Tue, 19 Mar 2019 17:12:06 +0000 (10:12 -0700)]
tracing: kdb: Allow ftdump to skip all but the last few entries
The 'ftdump' command in kdb is currently a bit of a last resort, at
least if you have lots of traces turned on. It's going to print a
whole boatload of data out your serial port which is probably running
at 115200. This could easily take many, many minutes.
Usually you're most interested in what's at the _end_ of the ftrace
buffer, AKA what happened most recently. That means you've got to
wait the full time for the dump. The 'ftdump' command does attempt to
help you a little bit by allowing you to skip a fixed number of
entries. Unfortunately it provides no way for you to know how many
entries you should skip.
Let's do similar to python and allow you to use a negative number to
indicate that you want to skip all entries except the last few. This
allows you to quickly see what you want.
Note that we also change the printout in ftdump to print the
(positive) number of entries actually skipped since that could be
helpful to know when you've specified a negative skip count.
Link: http://lkml.kernel.org/r/20190319171206.97107-3-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Douglas Anderson [Tue, 19 Mar 2019 17:12:05 +0000 (10:12 -0700)]
tracing: Add trace_total_entries() / trace_total_entries_cpu()
These two new exported functions will be used in a future patch by
kdb_ftdump() to quickly skip all but the last few trace entries.
Link: http://lkml.kernel.org/r/20190319171206.97107-2-dianders@chromium.org
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Douglas Anderson [Tue, 19 Mar 2019 17:12:04 +0000 (10:12 -0700)]
tracing: kdb: The skip_lines parameter should have been skip_entries
The things skipped by kdb's "ftdump" command when you pass it a
parameter has always been entries, not lines. The difference usually
doesn't matter but when the trace buffer has multi-line entries (like
a stack dump) it can matter.
Let's fix this both in the help text for ftdump and also in the local
variable names.
Link: http://lkml.kernel.org/r/20190319171206.97107-1-dianders@chromium.org
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Wed, 24 Apr 2019 16:34:46 +0000 (12:34 -0400)]
function_graph: Place ftrace_graph_entry_stub() prototype in include/linux/ftrace.h
ftrace_graph_entry_stub() is defined in generic code, its prototype should
be in the generic header and not defined throughout architecture specific
code in order to use it.
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Sun, 21 Apr 2019 23:40:44 +0000 (19:40 -0400)]
function_graph: Have selftest also emulate tr->reset() as it did with tr->init()
The function_graph boot up self test emulates the tr->init() function in
order to add a wrapper around the function graph tracer entry code to test
for lock ups and such. But it does not emulate the tr->reset(), and just
calls the function_graph tracer tr->reset() function which will use its own
fgraph_ops to unregister function tracing with. As the fgraph_ops is
becoming more meaningful with the register_ftrace_graph() and
unregister_ftrace_graph() functions, the two need to be the same. The
emulated tr->init() uses its own fgraph_ops descriptor, which means the
unregister_ftrace_graph() must use the same ftrace_ops, which the selftest
currently does not do. By emulating the tr->reset() as the selftest does
with the tr->init() it will be able to pass the same fgraph_ops descriptor
to the unregister_ftrace_graph() as it did with the register_ftrace_graph().
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Thu, 11 Apr 2019 15:46:13 +0000 (11:46 -0400)]
ftrace: Do not process STUB functions in ftrace_ops_list_func()
The function_graph tracer has a stub function and its ops flag has the
FTRACE_OPS_FL_STUB set. As the function graph does not use the
ftrace_ops->func pointer but instead is called by a separate part of the
ftrace trampoline. The function_graph tracer still requires to pass in a
ftrace_ops that may also hold the hash of the functions to call. But there's
no reason to test that hash in the function tracing portion. Instead of
testing to see if we should call the stub function, just test if the ops has
FTRACE_OPS_FL_STUB set, and just skip it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Wed, 10 Apr 2019 14:45:38 +0000 (10:45 -0400)]
ftrace: Remove ASSIGN_OPS_HASH() macro from ftrace.c
The ASSIGN_OPS_HASH() macro was moved to fgraph.c where it was used, but for
some reason it wasn't removed from ftrace.c, as it is no longer referenced
there.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Yafang Shao [Tue, 26 Mar 2019 12:13:11 +0000 (20:13 +0800)]
rcu: validate arguments for rcu tracepoints
When CONFIG_RCU_TRACE is not set, all these tracepoints are defined as
do-nothing macro.
We'd better make those inline functions that take proper arguments.
As RCU_TRACE() is defined as do-nothing marco as well when
CONFIG_RCU_TRACE is not set, so we can clean it up.
Link: http://lkml.kernel.org/r/1553602391-11926-4-git-send-email-laoar.shao@gmail.com
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Yafang Shao [Tue, 26 Mar 2019 12:13:10 +0000 (20:13 +0800)]
sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set
The tracepoints trace_sched_stat_{iowait, blocked, wait, sleep} should
be not exposed to user if CONFIG_SCHEDSTATS is not set.
Link: http://lkml.kernel.org/r/1553602391-11926-3-git-send-email-laoar.shao@gmail.com
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Yafang Shao [Tue, 26 Mar 2019 12:13:09 +0000 (20:13 +0800)]
tracing: introduce TRACE_EVENT_NOP()
Sometimes we want to define a tracepoint as a do-nothing function.
So I introduce TRACE_EVENT_NOP, DECLARE_EVENT_CLASS_NOP and
DEFINE_EVENT_NOP for this kind of usage.
Link: http://lkml.kernel.org/r/1553602391-11926-2-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:25 +0000 (18:48 -0500)]
tracing: Add error_log to README
Add brief blurb about error_log to the 'Important files' section.
Link: http://lkml.kernel.org/r/c81e60f9aded495081231a32d2d1023c4d043a7a.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:24 +0000 (18:48 -0500)]
tracing: Add tracing/error_log Documentation
Move most of the hist trigger extended error documentation to
ftrace.rst and expand on it to fully document tracing/error_log.
Link: http://lkml.kernel.org/r/c5d53c8f643ef6844d6ad8d0200c116936730b01.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:23 +0000 (18:48 -0500)]
selftests/ftrace: Add tracing/error_log testcase
Add a testcase verifying basic tracing/error_log functionality.
Link: http://lkml.kernel.org/r/bf1c0d47a24672df945331462682d96296d1ab28.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:22 +0000 (18:48 -0500)]
selftests/ftrace: Remove trigger-extended-error-support testcase
Error handling has been moved to the common tracing/error_log, so this
test is no longer valid.
Link: http://lkml.kernel.org/r/876a98b21018814cbf46f0a3605ae0906c51d53c.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:21 +0000 (18:48 -0500)]
selftests/ftrace: Move kprobe/uprobe check_error() to test.d/functions
The k/uprobe_sytax_errors test case defines a check_error() function
used to run a command and check the position of the caret in the
output.
This would be useful for other ftrace facilities too, so move it to
test.d/functions for use by anyone. In the process, rename it to
ftrace_errlog_check() and parametrize it for general use.
Link: http://lkml.kernel.org/r/9f88080a06f1755811f69081926afe7e5cb53178.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Sun, 31 Mar 2019 23:48:20 +0000 (18:48 -0500)]
selftests/ftrace: Add error_log testcase for probe errors
Add error_log testcase for error logs on probe events.
This tests most of error cases and checks the error position
is correct.
Link: http://lkml.kernel.org/r/63d695b74e0965988fa54ffa12beeb2c3475250d.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[tom.zanussi@linux.intel.com: changed >& redirection to 2>]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Tue, 2 Apr 2019 02:52:21 +0000 (22:52 -0400)]
tracing: Have the error logs show up in the proper instances
As each instance has their own error_log file, it makes more sense that the
instances show the errors of their own instead of all error_logs having the
same data. Make it that the errors show up in the instance error_log file
that the error happens in. If no instance trace_array is available, then
NULL can be passed in which will create the error in the top level instance
(the one at the top of the tracefs directory).
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Tue, 2 Apr 2019 02:30:22 +0000 (22:30 -0400)]
tracing: Have histogram code pass around trace_array for error handling
Have the trace_array that associates the trace instance of the histogram
passed around to functions so that error handling can display the error
message in the proper instance.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Mon, 1 Apr 2019 20:07:48 +0000 (16:07 -0400)]
tracing: Add trace_array parameter to create_event_filter()
Pass in the trace_array that represents the instance the filter being
changed is in to create_event_filter(). This will allow for error messages
that happen when writing to the filter can be displayed in the proper
instance "error_log" file.
Note, for calls to create_filter() (that was also modified to support
create_event_filter()), that changes filters that do not exist in a instance
(for perf for example), NULL may be passed in, which means that there will
not be any message to log for that filter.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Sun, 31 Mar 2019 23:48:19 +0000 (18:48 -0500)]
tracing: Use tracing error_log with probe events
Use tracing error_log with probe events for logging error more
precisely. This also makes all parse error returns -EINVAL
(except for -ENOMEM), because user can see better error message
in error_log file now.
Link: http://lkml.kernel.org/r/6a4d90e141d138040ea61f4776b991597077451e.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:18 +0000 (18:48 -0500)]
tracing: Use tracing error_log with trace event filters
Use tracing_log_err() from the new tracing error_log mechanism to send
filter parse errors to tracing/error_log.
With this change, users will be able to see filter errors by looking
at tracing/error_log.
The same errors will also be available in the filter file, as
expected.
Link: http://lkml.kernel.org/r/1d942c419941539a11d78a6810fc5740a99b2974.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:17 +0000 (18:48 -0500)]
tracing: Use tracing error_log with hist triggers
Replace hist_err() and hist_err_event() with tracing_log_err() from
the new tracing error_log mechanism.
Also add a couple related helper functions and remove most of the old
hist_err()-related code.
With this change, users no longer read the hist files for hist trigger
error information, but instead look at tracing/error_log for the same
information.
Link: http://lkml.kernel.org/r/c98f77a97c9715d18b623eeb5741057b330d5ac0.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:16 +0000 (18:48 -0500)]
tracing: Save the last hist command's associated event name
In preparation for making use of the new trace error log, save the
subsystem and event name associated with the last hist command - it
will be passed as the location param in the event_log_err() calls.
Link: http://lkml.kernel.org/r/eb0fd1362be8f39facb86c83eecf441b7a5876f8.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi [Sun, 31 Mar 2019 23:48:15 +0000 (18:48 -0500)]
tracing: Add tracing error log
Introduce a new ftrace file, tracing/error_log, for ftrace commands to
log errors. This is useful for allowing more complex commands such as
hist trigger and kprobe_event commands to point out specifically where
something may have gone wrong without forcing them to resort to more
ad hoc methods such as tacking error messages onto existing output
files.
To log a tracing error, call the event_log_err() function, passing it
a location string describing where it came from e.g. kprobe_events or
system:event, the command that caused the error, an array of static
error strings describing errors and an index within that array which
describes the specific error, along with the position to place the
error caret.
Reading the log displays the last (currently) 8 errors logged in the
following format:
[timestamp] <loc>: error: <static error text>
Command: <command that caused the error>
^
Memory for the error log isn't allocated unless there has been a trace
event error, and the error log can be cleared and have its memory
freed by writing the empty string in truncation mode to it:
# echo > tracing/error_log.
Link: http://lkml.kernel.org/r/0c2c82571fd38c5f3a88ca823627edff250e9416.1554072478.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Improvements-suggested-by: Steve Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Divya Indi [Wed, 20 Mar 2019 18:28:51 +0000 (11:28 -0700)]
tracing: Kernel access to Ftrace instances
Ftrace provides the feature “instances” that provides the capability to
create multiple Ftrace ring buffers. However, currently these buffers
are created/accessed via userspace only. The kernel APIs providing these
features are not exported, hence cannot be used by other kernel
components.
This patch aims to extend this infrastructure to provide the
flexibility to create/log/remove/ enable-disable existing trace events
to these buffers from within the kernel.
Link: http://lkml.kernel.org/r/1553106531-3281-2-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Reviewed-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
YueHaibing [Sun, 23 Sep 2018 12:11:33 +0000 (12:11 +0000)]
ring-buffer: Fix ring buffer size in rb_write_something()
'cnt' should be used to calculate ring buffer size rather than data->cnt
Link: http://lkml.kernel.org/r/1537704693-184237-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Sun, 31 Mar 2019 21:39:29 +0000 (14:39 -0700)]
Linux 5.1-rc3
Linus Torvalds [Sun, 31 Mar 2019 15:55:59 +0000 (08:55 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A collection of x86 and ARM bugfixes, and some improvements to
documentation.
On top of this, a cleanup of kvm_para.h headers, which were exported
by some architectures even though they not support KVM at all. This is
responsible for all the Kbuild changes in the diffstat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
KVM: doc: Document the life cycle of a VM and its resources
KVM: selftests: complete IO before migrating guest state
KVM: selftests: disable stack protector for all KVM tests
KVM: selftests: explicitly disable PIE for tests
KVM: selftests: assert on exit reason in CR4/cpuid sync test
KVM: x86: update %rip after emulating IO
x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
kvm: don't redefine flags as something else
kvm: mmu: Used range based flushing in slot_handle_level_range
KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
KVM: Reject device ioctls from processes other than the VM's creator
KVM: doc: Fix incorrect word ordering regarding supported use of APIs
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
...
Linus Torvalds [Sun, 31 Mar 2019 15:40:15 +0000 (08:40 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 updates:
- Prevent exceeding he valid physical address space in the /dev/mem
limit checks.
- Move all header content inside the header guard to prevent compile
failures.
- Fix the bogus __percpu annotation in this_cpu_has() which makes
sparse very noisy.
- Disable switch jump tables completely when retpolines are enabled.
- Prevent leaking the trampoline address"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/realmode: Make set_real_mode_mem() static inline
x86/cpufeature: Fix __percpu annotation in this_cpu_has()
x86/mm: Don't exceed the valid physical address space
x86/retpolines: Disable switch jump tables when retpolines are enabled
x86/realmode: Don't leak the trampoline kernel address
x86/boot: Fix incorrect ifdeffery scope
x86/resctrl: Remove unused variable
Linus Torvalds [Sun, 31 Mar 2019 15:37:04 +0000 (08:37 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
"Core libraries:
- Fix max perf_event_attr.precise_ip detection.
- Fix parser error for uncore event alias
- Fixup ordering of kernel maps after obtaining the main kernel map
address.
Intel PT:
- Fix TSC slip where A TSC packet can slip past MTC packets so that
the timestamp appears to go backwards.
- Fixes for exported-sql-viewer GUI conversion to python3.
ARM coresight:
- Fix the build by adding a missing case value for enumeration value
introduced in newer library, that now is the required one.
tool headers:
- Syncronize kernel headers with the kernel, getting new io_uring and
pidfd_send_signal syscalls so that 'perf trace' can handle them"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf pmu: Fix parser error for uncore event alias
perf scripts python: exported-sql-viewer.py: Fix python3 support
perf scripts python: exported-sql-viewer.py: Fix never-ending loop
perf machine: Update kernel map address and re-order properly
tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources
tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd
tools headers uapi: Update drm/i915_drm.h
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition
tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h
perf evsel: Fix max perf_event_attr.precise_ip detection
perf intel-pt: Fix TSC slip
perf cs-etm: Add missing case value
Linus Torvalds [Sun, 31 Mar 2019 15:22:12 +0000 (08:22 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull CPU hotplug fixes from Thomas Gleixner:
"Two SMT/hotplug related fixes:
- Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup
aborts. This is triggered with the 'nosmt' command line option, but
can happen by any abort condition. As the real unplug code is not
compiled in, prevent the fail by keeping the CPU in zombie state.
- Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation
completely. With 'nosmt' being a popular option it's required to
unplug the half brought up sibling CPUs (due to the MCE wreckage)
completely"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y
cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n
Linus Torvalds [Sun, 31 Mar 2019 14:48:58 +0000 (07:48 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixlet from Thomas Gleixner:
"Trivial update to the maintainers file"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove deleted file from futex file pattern
Linus Torvalds [Sun, 31 Mar 2019 14:47:21 +0000 (07:47 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
"A small set of core updates:
- Make the watchdog respect the selected CPU mask again. That was
broken by the rework of the watchdog thread management and caused
inconsistent state and NMI watchdog being unstoppable.
- Ensure that the objtool build can find the libelf location.
- Remove dead kcore stub code"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Respect watchdog cpumask on CPU hotplug
objtool: Query pkg-config for libelf location
proc/kcore: Remove unused kclist_add_remap()
Linus Torvalds [Sun, 31 Mar 2019 14:44:13 +0000 (07:44 -0700)]
Merge tag 'powerpc-5.1-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Three non-regression fixes.
- Our optimised memcmp could read past the end of one of the buffers
and potentially trigger a page fault leading to an oops.
- Some of our code to read energy management data on PowerVM had an
endian bug leading to bogus results.
- When reporting a machine check exception we incorrectly reported
TLB multihits as D-Cache multhits due to a missing entry in the
array of causes.
Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar,
Segher Boessenkool, Vaidyanathan Srinivasan"
* tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/mce: Fix misleading print for TLB mutlihit
powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes
powerpc/64: Fix memcmp reading past the end of src/dest
Linus Torvalds [Sun, 31 Mar 2019 14:42:39 +0000 (07:42 -0700)]
Merge tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- Revert "dmaengine: stm32-mdma: Add a check on read_u32_array" as that
caused regression
- Fix MAINTAINER file uniphier-mdmac.c file path
* tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma:
MAINTAINERS: Fix uniphier-mdmac.c file path
dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
Linus Torvalds [Sat, 30 Mar 2019 19:12:56 +0000 (12:12 -0700)]
Merge tag 'led-fixes-for-5.1-rc3' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
- fix refcnt leak on interface rename
- use memcpy in device_name_store() to avoid including garbage from a
previous, longer value in the device_name
- fix a potential NULL pointer dereference in case of_match_device()
cannot find a match
* tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: trigger: netdev: use memcpy in device_name_store
leds: pca9532: fix a potential NULL pointer dereference
leds: trigger: netdev: fix refcnt leak on interface rename
Linus Torvalds [Sat, 30 Mar 2019 18:33:34 +0000 (11:33 -0700)]
Merge tag 'gpio-v5.1-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"As you can see [in the git history] I was away on leave and Bartosz
kindly stepped in and collected a slew of fixes, I pulled them into my
tree in two sets and merged some two more fixes (fixing my own caused
bugs) on top.
Summary:
- Revert the extended use of gpio_set_config() and think about how we
can do this properly.
- Fix up the SPI CS GPIO handling so it now works properly on the SPI
bus children, as intended.
- Error paths and driver fixes"
* tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mockup: use simple_read_from_buffer() in debugfs read callback
gpio: of: Fix of_gpiochip_add() error path
gpio: of: Check for "spi-cs-high" in child instead of parent node
gpio: of: Check propname before applying "cs-gpios" quirks
gpio: mockup: fix debugfs read
Revert "gpio: use new gpio_set_config() helper in more places"
gpio: aspeed: fix a potential NULL pointer dereference
gpio: amd-fch: Fix bogus SPDX identifier
gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input
gpio: exar: add a check for the return value of ida_simple_get fails
Rasmus Villemoes [Thu, 14 Mar 2019 14:06:14 +0000 (15:06 +0100)]
leds: trigger: netdev: use memcpy in device_name_store
If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example
# cat device_name
# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32
I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.
This is also preparation for future patches.
Fixes:
06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Kangjie Lu [Sat, 9 Mar 2019 06:04:11 +0000 (00:04 -0600)]
leds: pca9532: fix a potential NULL pointer dereference
In case of_match_device cannot find a match, return -EINVAL to avoid
NULL pointer dereference.
Fixes:
fa4191a609f2 ("leds: pca9532: Add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Linus Torvalds [Sat, 30 Mar 2019 17:35:20 +0000 (10:35 -0700)]
Merge tag 'staging-5.1-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.1-rc3, and one driver
removal.
The biggest thing here is the removal of the mt7621-eth driver as a
"real" network driver was merged in 5.1-rc1 for this hardware, so this
old driver can now be removed.
Other than that, there are just a number of small fixes, all resolving
reported issues and some potential corner cases for error handling
paths.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt6655: Remove vif check from vnt_interrupt
staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()
staging: octeon-ethernet: fix incorrect PHY mode
staging: vc04_services: Fix an error code in vchiq_probe()
staging: erofs: fix error handling when failed to read compresssed data
staging: vt6655: Fix interrupt race condition on device start up.
staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc
staging: rtl8712: uninitialized memory in read_bbreg_hdl()
staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference
staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc
staging, mt7621-pci: fix build without pci support
staging: speakup_soft: Fix alternate speech with other synths
staging: axis-fifo: add CONFIG_OF dependency
staging: olpc_dcon_xo_1: add missing 'const' qualifier
staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest
staging: erofs: fix to handle error path of erofs_vmap()
staging: mt7621-dts: update ethernet settings.
staging: remove mt7621-eth
Linus Torvalds [Sat, 30 Mar 2019 17:30:38 +0000 (10:30 -0700)]
Merge tag 'tty-5.1-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.1-rc3.
Nothing major here, just a number of potential problems fixes for
error handling paths, as well as some other minor bugfixes for
reported issues with 5.1-rc1.
All of these have been in linux-next with no reported issues"
* tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix NULL pointer issue when tty_port ops is not set
Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
dt-bindings: serial: Add compatible for Mediatek MT8183
tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
tty/serial: atmel: Add is_half_duplex helper
serial: sh-sci: Fix setting SCSCR_TIE while transferring data
serial: ar933x_uart: Fix build failure with disabled console
tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup
sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()
tty: mxs-auart: fix a potential NULL pointer dereference
tty: atmel_serial: fix a potential NULL pointer dereference
serial: max310x: Fix to avoid potential NULL pointer dereference
serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
Linus Torvalds [Sat, 30 Mar 2019 17:26:36 +0000 (10:26 -0700)]
Merge tag 'usb-5.1-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.1-rc3.
Nothing major at all here, just a small collection of fixes for
reported issues, and potential problems with error handling paths.
Also a few new device ids, as normal.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Olicard 600
USB: serial: cp210x: add new device id
usb: u132-hcd: fix resource leak
usb: cdc-acm: fix race during wakeup blocking TX traffic
usb: mtu3: fix EXTCON dependency
usb: usb251xb: fix to avoid potential NULL pointer dereference
usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
xhci: Don't let USB3 ports stuck in polling state prevent suspend
usb: xhci: dbc: Don't free all memory with spinlock held
xhci: Fix port resume done detection for SS ports with LPM enabled
USB: serial: mos7720: fix mos_parport refcount imbalance on error path
USB: gadget: f_hid: fix deadlock in f_hidg_write()
usb: gadget: net2272: Fix net2272_dequeue()
usb: gadget: net2280: Fix net2280_dequeue()
usb: gadget: net2280: Fix overrun of OUT messages
usb: dwc3: pci: add support for Comet Lake PCH ID
usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0
usb: common: Consider only available nodes for dr_mode
usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps
...
Linus Torvalds [Sat, 30 Mar 2019 17:09:11 +0000 (10:09 -0700)]
Merge tag 'acpi-5.1-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This corrects a previous attempt to make Linux use its own set of ACPI
debug flags different from the upstream ACPICA's default (Erik
Schmauss)"
* tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: use different default debug value than ACPICA
Linus Torvalds [Sat, 30 Mar 2019 17:06:09 +0000 (10:06 -0700)]
Merge tag 'pm-5.1-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix CPU base frequency reporting in the intel_pstate driver and
a use-after-free in the scpi-cpufreq driver.
Specifics:
- Fix the ACPI CPPC library to actually follow the specification when
decoding the guaranteed performance register information and make
the intel_pstate driver to fall back to the nominal frequency when
reporting the base frequency if the guaranteed performance register
information is not there (Srinivas Pandruvada).
- Fix use-after-free in the exit callback of the scpi-cpufreq left
after an update during the 5.0 development cycle (Vincent Stehlé)"
* tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scpi: Fix use after free
cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency
ACPI / CPPC: Fix guaranteed performance handling
Linus Torvalds [Sat, 30 Mar 2019 16:19:09 +0000 (09:19 -0700)]
Merge branch 'fixes-v5.1-a' of git://git./linux/kernel/git/jmorris/linux-security
Pull security layer fixes from James Morris:
"Yama and LSM config fixes"
* 'fixes-v5.1-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig"
Yama: mark local symbols as static
Linus Torvalds [Fri, 29 Mar 2019 23:02:28 +0000 (16:02 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
fs: fs_parser: fix printk format warning
checkpatch: add %pt as a valid vsprintf extension
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
drivers/block/zram/zram_drv.c: fix idle/writeback string compare
mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()
mm/memory_hotplug.c: fix notification in offline error path
ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK
fs/proc/kcore.c: make kcore_modules static
include/linux/list.h: fix list_is_first() kernel-doc
mm/debug.c: fix __dump_page when mapping->host is not set
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
include/linux/hugetlb.h: convert to use vm_fault_t
iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging
mm: add support for kmem caches in DMA32 zone
ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
mm/hotplug: fix offline undo_isolate_page_range()
fs/open.c: allow opening only regular files during execve()
mailmap: add Changbin Du
mm/debug.c: add a cast to u64 for atomic64_read()
...
Linus Torvalds [Fri, 29 Mar 2019 22:44:11 +0000 (15:44 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Use memblock_alloc() instead of memblock_alloc_low() in
request_standard_resources(), the latter being limited to the low 4G
memory range on arm64"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: replace memblock_alloc_low with memblock_alloc
Linus Torvalds [Fri, 29 Mar 2019 22:37:10 +0000 (15:37 -0700)]
Merge tag 'iommu-fixes-v5.1-rc3' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a bug in the AMD IOMMU driver not handling exclusion ranges
correctly. In fact the driver did not reserve these ranges for IOVA
allocations, so that dma-handles could be allocated in an exclusion
range, leading to data corruption. Exclusion ranges have not been
used by any firmware up to now, so this issue remained undiscovered
for quite some time.
- Fix wrong warning messages that the IOMMU core code prints when it
tries to allocate the default domain for an iommu group and the
driver does not support any of the default domain types (like Intel
VT-d).
* tag 'iommu-fixes-v5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Reserve exclusion range in iova-domain
iommu: Don't print warning when IOMMU driver only supports unmanaged domains
Linus Torvalds [Fri, 29 Mar 2019 22:07:29 +0000 (15:07 -0700)]
Merge tag 'driver-core-5.1-rc3' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core patch for 5.1-rc3.
After 5.1-rc1, all of the users of BUS_ATTR() are finally removed, so
we can now drop this macro from include/linux/device.h so that no more
new users will be created.
This patch has been in linux-next for a while, with no reported
issues"
* tag 'driver-core-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: remove BUS_ATTR()
Linus Torvalds [Fri, 29 Mar 2019 22:03:30 +0000 (15:03 -0700)]
Merge tag 'char-misc-5.1-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some binder, habanalabs, and vboxguest driver fixes for
5.1-rc3.
The Binder fixes resolve some reported issues found by testing, first
by the selinux developers, and then earlier today by syzbot.
The habanalabs fixes are all minor, resolving a number of tiny things.
The vboxguest patches are a bit larger. They resolve the fact that
virtual box decided to change their api in their latest release in a
way that broke the existing kernel code, despite saying that they were
never going to do that. So this is a bit of a "new feature", but is
good to get merged so that 5.1 will work with the latest release. The
changes are not large and of course virtual box "swears" they will not
break this again, but no one is holding their breath here.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x
binder: fix race between munmap() and direct reclaim
binder: fix BUG_ON found by selinux-testsuite
habanalabs: cast to expected type
habanalabs: prevent host crash during suspend/resume
habanalabs: perform accounting for active CS
habanalabs: fix mapping with page size bigger than 4KB
habanalabs: complete user context cleanup before hard reset
habanalabs: fix bug when mapping very large memory area
habanalabs: fix MMU number of pages calculation
Linus Torvalds [Fri, 29 Mar 2019 21:58:49 +0000 (14:58 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirteen fixes, seven of which are for IBM fibre channel and three
additional for fairly serious bugs in drivers (qla2xxx, mpt3sas,
aacraid).
Of the three core fixes, the most significant is probably the missed
run queue causing an indefinite hang. The others are fixing a
potential use after free on device close and silencing an incorrect
warning"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvfc: Clean up transport events
scsi: ibmvfc: Byte swap status and error codes when logging
scsi: ibmvfc: Add failed PRLI to cmd_status lookup array
scsi: ibmvfc: Remove "failed" from logged errors
scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN
scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices
scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host
scsi: sd: Quiesce warning if device does not report optimal I/O size
scsi: sd: Fix a race between closing an sd device and sd I/O
scsi: core: Run queue when state is set to running after being blocked
scsi: qla4xxx: fix a potential NULL pointer dereference
scsi: aacraid: Insure we don't access PCIe space during AER/EEH
scsi: mpt3sas: Fix kernel panic during expander reset
Linus Torvalds [Fri, 29 Mar 2019 21:56:53 +0000 (14:56 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A new ID for the i801 driver and some Documentation fixes to make it
easier for people to find the bindings (which is also a basis for
further improvements in that area)"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: wmt: make bindings file name match the driver
i2c: sun6i-p2wi: make bindings file name match the driver
i2c: stu300: make bindings file name match the driver
i2c: mt65xx: make bindings file name match the driver
i2c: iop3xx: make bindings file name match the driver
i2c: i801: Add support for Intel Comet Lake
Linus Torvalds [Fri, 29 Mar 2019 21:53:33 +0000 (14:53 -0700)]
Merge tag 'sound-5.1-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The important fixes at this time are a couple fixes in ALSA core: a
fix for PCM is about the OOB access in PCM OSS plugins that has been
for long time, but hasn't hit so often until now just because we
allocated a large buffer via vmalloc(), and surfaced more often after
switching to kvmalloc(). Another fix is for a long-standing PCM
problem wrt racy PM resume.
Others are trivial nospec coverage and usual HD-audio quirks"
* tag 'sound-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fix speakers on Acer Predator Helios 500 Ryzen laptops
ALSA: pcm: Don't suspend stream in unrecoverable PCM state
ALSA: hda/ca0132 - Simplify alt firmware loading code
ALSA: pcm: Fix possible OOB access in PCM oss plugins
ALSA: hda/realtek: Enable headset MIC of ASUS X430UN and X512DK with ALC256
ALSA: hda/realtek: Enable headset mic of ASUS P5440FF with ALC256
ALSA: hda/realtek: Enable ASUS X441MB and X705FD headset MIC with ALC256
ALSA: hda/realtek - Add support for Acer Aspire E5-523G/ES1-432 headset mic
ALSA: hda/realtek: Enable headset MIC of Acer Aspire Z24-890 with ALC286
ALSA: seq: oss: Fix Spectre v1 vulnerability
ALSA: rawmidi: Fix potential Spectre v1 vulnerability
Linus Torvalds [Fri, 29 Mar 2019 21:46:00 +0000 (14:46 -0700)]
Merge tag 'kbuild-fixes-v5.1' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove harmful -Oz option of Clang
- Get back the original behavior (no recursion for in-tree build) for
GNU Make 4.x
- Some minor fixes for coccinelle patches
- Do not overwrite .gitignore in the output directory in case it is
version-controlled
- Fix missed record-mcount bug for dynamic ftrace
- Fix endianness bug in modversions for relative CRC
- Cater to '^H' key code in Kconfig ncurses programs
* tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig/[mn]conf: handle backspace (^H) key
kbuild: modversions: Fix relative CRC byte order interpretation
scripts: coccinelle: Fix description of badty.cocci
kbuild: strip whitespace in cmd_record_mcount findstring
kbuild: do not overwrite .gitignore in output directory
kbuild: skip parsing pre sub-make code for recursion
coccinelle: put_device: reduce false positives
kbuild: skip sub-make for in-tree build with GNU Make 4.x
Revert "kbuild: use -Oz instead of -Os when using clang"
Linus Torvalds [Fri, 29 Mar 2019 21:43:07 +0000 (14:43 -0700)]
Merge tag 'for-linus-
20190329' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Small set of fixes that should go into this series. This contains:
- compat signal mask fix for io_uring (Arnd)
- EAGAIN corner case for direct vs buffered writes for io_uring
(Roman)
- NVMe pull request from Christoph with various little fixes
- sbitmap ws_active fix, which caused a perf regression for shared
tags (me)
- sbitmap bit ordering fix (Ming)
- libata on-stack DMA fix (Raymond)"
* tag 'for-linus-
20190329' of git://git.kernel.dk/linux-block:
nvmet: fix error flow during ns enable
nvmet: fix building bvec from sg list
nvme-multipath: relax ANA state check
nvme-tcp: fix an endianess miss-annotation
libata: fix using DMA buffers on stack
io_uring: offload write to async worker in case of -EAGAIN
sbitmap: order READ/WRITE freed instance and setting clear bit
blk-mq: fix sbitmap ws_active for shared tags
io_uring: fix big-endian compat signal mask handling
blk-mq: update comment for blk_mq_hctx_has_pending()
blk-mq: use blk_mq_put_driver_tag() to put tag
Linus Torvalds [Fri, 29 Mar 2019 21:41:09 +0000 (14:41 -0700)]
Merge tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to avoid choking on multipage bvecs in the messenger and a
small use-after-free fix"
* tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client:
ceph: fix use-after-free on symlink traversal
libceph: fix breakage caused by multipage bvecs
Linus Torvalds [Fri, 29 Mar 2019 21:36:57 +0000 (14:36 -0700)]
Merge tag 'xfs-5.1-fixes-1' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are a few fixes for some corruption bugs and uninitialized
variable problems. The few patches here have gone through a few days
worth of fstest runs with no new problems observed.
Changes since last update:
- Fix a bunch of static checker complaints about uninitialized
variables and insufficient range checks.
- Avoid a crash when incore extent map data are corrupt.
- Disallow FITRIM when we haven't recovered the log and know the
metadata are stale.
- Fix a data corruption when doing unaligned overlapping dio writes"
* tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: serialize unaligned dio writes against all other dio writes
xfs: prohibit fstrim in norecovery mode
xfs: always init bma in xfs_bmapi_write
xfs: fix btree scrub checking with regards to root-in-inode
xfs: dabtree scrub needs to range-check level
xfs: don't trip over uninitialized buffer on extent read of corrupted inode
Kees Cook [Fri, 29 Mar 2019 19:36:04 +0000 (12:36 -0700)]
LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig"
Commit
70b62c25665f636c ("LoadPin: Initialize as ordered LSM") removed
CONFIG_DEFAULT_SECURITY_{SELINUX,SMACK,TOMOYO,APPARMOR,DAC} from
security/Kconfig and changed CONFIG_LSM to provide a fixed ordering as a
default value. That commit expected that existing users (upgrading from
Linux 5.0 and earlier) will edit CONFIG_LSM value in accordance with
their CONFIG_DEFAULT_SECURITY_* choice in their old kernel configs. But
since users might forget to edit CONFIG_LSM value, this patch revives
the choice (only for providing the default value for CONFIG_LSM) in order
to make sure that CONFIG_LSM reflects CONFIG_DEFAULT_SECURITY_* from their
old kernel configs.
Note that since TOMOYO can be fully stacked against the other legacy
major LSMs, when it is selected, it explicitly disables the other LSMs
to avoid them also initializing since TOMOYO does not expect this
currently.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes:
70b62c25665f636c ("LoadPin: Initialize as ordered LSM")
Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Thomas Gleixner [Fri, 29 Mar 2019 20:28:58 +0000 (21:28 +0100)]
Merge tag 'perf-urgent-for-mingo-5.1-
20190329' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo:
Core libraries:
Jiri Olsa:
- Fix max perf_event_attr.precise_ip detection.
Kan Liang:
- Fix parser error for uncore event alias
Wei Lin:
- Fixup ordering of kernel maps after obtaining the main kernel map address.
Intel PT:
Adrian Hunter:
- Fix TSC slip where A TSC packet can slip past MTC packets so that the
timestamp appears to go backwards.
- Fixes for exported-sql-viewer GUI conversion to python3.
ARM coresight:
Solomon Tan:
- Fix the build by adding a missing case value for enumeration value introduced
in newer library, that now is the required one.
tool headers:
Arnaldo Carvalho de Melo:
- Syncronize kernel headers with the kernel, getting new io_uring and
pidfd_send_signal syscalls so that 'perf trace' can handle them.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 29 Mar 2019 18:12:45 +0000 (11:12 -0700)]
Merge tag 'drm-fixes-2019-03-29' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes roundup, nothing two serious, some usb device regressions
are fixed, and i915 GVT has a bigger fix but otherwise not really much
happening here.
core:
- fb bpp check regression fix
- release/unplug fix
- use after free fixes
i915:
- fix mmap range checks
- fix gvt ppgtt mm LRU list access races
- fix selftest error pointer check
- fix a macro definition (pre-emptive for potential further backports)
- fix one AML SKU ULX status
amdgpu:
- one variable refresh rate fix
udl:
- fix EDID reading
tegra:
- build/warning fixes
meson:
- cleanup path fixes
- TMDS clock filter fix
rockchip:
- NV12 buffers and scalar fix"
* tag 'drm-fixes-2019-03-29' of git://anongit.freedesktop.org/drm/drm: (22 commits)
drm/i915/icl: Fix VEBOX mismatch BUG_ON()
drm/i915/selftests: Fix an IS_ERR() vs NULL check
drm/i915: Mark AML 0x87CA as ULX
drm/meson: fix TMDS clock filtering for DMT monitors
drm/meson: Uninstall IRQ handler
drm/meson: Fix invalid pointer in meson_drv_unbind()
drm/udl: Refactor edid retrieving in UDL driver (v2)
drm: Fix drm_release() and device unplug
drm/fb: avoid setting 0 depth.
drm/tegra: vic: Fix implicit function declaration warning
drm/tegra: hub: Fix dereference before check
drm/i915/icl: Fix the TRANS_DDI_FUNC_CTL2 bitfield macro
drm/amd/display: Only allow VRR when vrefresh is within supported range
drm/rockchip: vop: reset scale mode when win is disabled
drm/vkms: fix use-after-free when drm_gem_handle_create() fails
drm/vgem: fix use-after-free when drm_gem_handle_create() fails
drm/i915/gvt: Add mutual lock for ppgtt mm LRU list
drm/i915/gvt: Only assign ppgtt root at dispatch time
drm/i915/gvt: Don't submit request for error workload dispatch
drm/i915/gvt: stop scheduling workload when vgpu is inactive
...
YueHaibing [Fri, 29 Mar 2019 03:44:40 +0000 (20:44 -0700)]
fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
Syzkaller reports:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 5373 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:put_links+0x101/0x440 fs/proc/proc_sysctl.c:1599
Code: 00 0f 85 3a 03 00 00 48 8b 43 38 48 89 44 24 20 48 83 c0 38 48 89 c2 48 89 44 24 28 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 fe 02 00 00 48 8b 74 24 20 48 c7 c7 60 2a 9d 91
RSP: 0018:
ffff8881d828f238 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
ffff8881e01b1140 RCX:
ffffffff8ee98267
RDX:
0000000000000007 RSI:
ffffc90001479000 RDI:
ffff8881e01b1178
RBP:
dffffc0000000000 R08:
ffffed103ee27259 R09:
ffffed103ee27259
R10:
0000000000000001 R11:
ffffed103ee27258 R12:
fffffffffffffff4
R13:
0000000000000006 R14:
ffff8881f59838c0 R15:
dffffc0000000000
FS:
00007f072254f700(0000) GS:
ffff8881f7100000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fff8b286668 CR3:
00000001f0542002 CR4:
00000000007606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
drop_sysctl_table+0x152/0x9f0 fs/proc/proc_sysctl.c:1629
get_subdir fs/proc/proc_sysctl.c:1022 [inline]
__register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335
br_netfilter_init+0xbc/0x1000 [br_netfilter]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f072254ec58 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
RDX:
0000000000000000 RSI:
0000000020000280 RDI:
0000000000000003
RBP:
00007f072254ec70 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f072254f6bc
R13:
00000000004bcefa R14:
00000000006f6fb0 R15:
0000000000000004
Modules linked in: br_netfilter(+) dvb_usb_dibusb_mc_common dib3000mc dibx000_common dvb_usb_dibusb_common dvb_usb_dw2102 dvb_usb classmate_laptop palmas_regulator cn videobuf2_v4l2 v4l2_common snd_soc_bd28623 mptbase snd_usb_usx2y snd_usbmidi_lib snd_rawmidi wmi libnvdimm lockd sunrpc grace rc_kworld_pc150u rc_core rtc_da9063 sha1_ssse3 i2c_cros_ec_tunnel adxl34x_spi adxl34x nfnetlink lib80211 i5500_temp dvb_as102 dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops udc_core lnbp22 leds_lp3952 hid_roccat_ryos s1d13xxxfb mtd vport_geneve openvswitch nf_conncount nf_nat_ipv6 nsh geneve udp_tunnel ip6_udp_tunnel snd_soc_mt6351 sis_agp phylink snd_soc_adau1761_spi snd_soc_adau1761 snd_soc_adau17x1 snd_soc_core snd_pcm_dmaengine ac97_bus snd_compress snd_soc_adau_utils snd_soc_sigmadsp_regmap snd_soc_sigmadsp raid_class hid_roccat_konepure hid_roccat_common hid_roccat c2port_duramar2150 core mdio_bcm_unimac iptable_security iptable_raw iptable_mangle
iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim devlink vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel joydev mousedev ide_pci_generic piix aesni_intel aes_x86_64 ide_core crypto_simd atkbd cryptd glue_helper serio_raw ata_generic pata_acpi i2c_piix4 floppy sch_fq_codel ip_tables x_tables ipv6 [last unloaded: lm73]
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace
770020de38961fd0 ]---
A new dir entry can be created in get_subdir and its 'header->parent' is
set to NULL. Only after insert_header success, it will be set to 'dir',
otherwise 'header->parent' is set to NULL and drop_sysctl_table is called.
However in err handling path of get_subdir, drop_sysctl_table also be
called on 'new->header' regardless its value of parent pointer. Then
put_links is called, which triggers NULL-ptr deref when access member of
header->parent.
In fact we have multiple error paths which call drop_sysctl_table() there,
upon failure on insert_links() we also call drop_sysctl_table().And even
in the successful case on __register_sysctl_table() we still always call
drop_sysctl_table().This patch fix it.
Link: http://lkml.kernel.org/r/20190314085527.13244-1-yuehaibing@huawei.com
Fixes:
0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org> [3.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 29 Mar 2019 03:44:36 +0000 (20:44 -0700)]
fs: fs_parser: fix printk format warning
Fix printk format warning (seen on i386 builds) by using ptrdiff format
specifier (%t):
fs/fs_parser.c:413:6: warning: format `%lu' expects argument of type `long unsigned int', but argument 3 has type `int' [-Wformat=]
Link: http://lkml.kernel.org/r/19432668-ffd3-fbb2-af4f-1c8e48f6cc81@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Belloni [Fri, 29 Mar 2019 03:44:32 +0000 (20:44 -0700)]
checkpatch: add %pt as a valid vsprintf extension
Commit
4d42c44727a0 ("lib/vsprintf: Print time and date in human
readable format via %pt") introduced a new extension, %pt.
Add it in the list of valid extensions.
Link: http://lkml.kernel.org/r/20190314203719.29130-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lars Persson [Fri, 29 Mar 2019 03:44:28 +0000 (20:44 -0700)]
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
Our MIPS 1004Kc SoCs were seeing random userspace crashes with SIGILL
and SIGSEGV that could not be traced back to a userspace code bug. They
had all the magic signs of an I/D cache coherency issue.
Now recently we noticed that the /proc/sys/vm/compact_memory interface
was quite efficient at provoking this class of userspace crashes.
Studying the code in mm/migrate.c there is a distinction made between
migrating a page that is mapped at the instant of migration and one that
is not mapped. Our problem turned out to be the non-mapped pages.
For the non-mapped page the code performs a copy of the page content and
all relevant meta-data of the page without doing the required D-cache
maintenance. This leaves dirty data in the D-cache of the CPU and on
the 1004K cores this data is not visible to the I-cache. A subsequent
page-fault that triggers a mapping of the page will happily serve the
process with potentially stale code.
What about ARM then, this bug should have seen greater exposure? Well
ARM became immune to this flaw back in 2010, see commit
c01778001a4f
("ARM: 6379/1: Assume new page cache pages have dirty D-cache").
My proposed fix moves the D-cache maintenance inside move_to_new_page to
make it common for both cases.
Link: http://lkml.kernel.org/r/20190315083502.11849-1-larper@axis.com
Fixes:
97ee0524614 ("flush cache before installing new page at migraton")
Signed-off-by: Lars Persson <larper@axis.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Fri, 29 Mar 2019 03:44:24 +0000 (20:44 -0700)]
drivers/block/zram/zram_drv.c: fix idle/writeback string compare
Makoto report a below KASAN error: zram does out-of-bounds read. Because
strscpy copies from source up to count bytes unconditionally. It could
cause out-of-bounds read on next object in slab.
To prevent it, use strlcpy which checks source's length automatically.
BUG: KASAN: slab-out-of-bounds in strscpy+0x68/0x154
Read of size 8 at addr
ffffffc0c3495a00 by task system_server/1314
..
Call trace:
strscpy+0x68/0x154
idle_store+0xc4/0x34c
dev_attr_store+0x50/0x6c
sysfs_kf_write+0x98/0xb4
kernfs_fop_write+0x198/0x260
__vfs_write+0x10c/0x338
vfs_write+0x114/0x238
SyS_write+0xc8/0x168
__sys_trace_return+0x0/0x4
Allocated by task 1314:
__kmalloc+0x280/0x318
kernfs_fop_write+0xac/0x260
__vfs_write+0x10c/0x338
vfs_write+0x114/0x238
SyS_write+0xc8/0x168
__sys_trace_return+0x0/0x4
Freed by task 2855:
kfree+0x138/0x630
kernfs_put_open_node+0x10c/0x124
kernfs_fop_release+0xd8/0x114
__fput+0x130/0x2a4
____fput+0x1c/0x28
task_work_run+0x16c/0x1c8
do_notify_resume+0x2bc/0x107c
work_pending+0x8/0x10
The buggy address belongs to the object at
ffffffc0c3495a00
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 0 bytes inside of
128-byte region [
ffffffc0c3495a00,
ffffffc0c3495a80)
The buggy address belongs to the page:
page:
ffffffbf030d2500 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x4000000000010200(slab|head)
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffc0c3495900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0c3495980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>
ffffffc0c3495a00: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffffc0c3495a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc0c3495b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Link: http://lkml.kernel.org/r/20190319231911.145968-1-minchan@kernel.org
Cc: <stable@vger.kernel.org> [5.0]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Makoto Wu <makotowu@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 29 Mar 2019 03:44:21 +0000 (20:44 -0700)]
mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()
Due to has_unmovable_pages() taking an incorrect irqsave flag instead of
the isolation flag in set_migratetype_isolate(), there are issues with
HWPOSION and error reporting where dump_page() is not called when there
is an unmovable page.
Link: http://lkml.kernel.org/r/20190320204941.53731-1-cai@lca.pw
Fixes:
d381c54760dc ("mm: only report isolation failures when offlining memory")
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org> [5.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 29 Mar 2019 03:44:16 +0000 (20:44 -0700)]
mm/memory_hotplug.c: fix notification in offline error path
When start_isolate_page_range() returned -EBUSY in __offline_pages(), it
calls memory_notify(MEM_CANCEL_OFFLINE, &arg) with an uninitialized
"arg". As the result, it triggers warnings below. Also, it is only
necessary to notify MEM_CANCEL_OFFLINE after MEM_GOING_OFFLINE.
page:
ffffea0001200000 count:1 mapcount:0 mapping:
0000000000000000
index:0x0
flags: 0x3fffe000001000(reserved)
raw:
003fffe000001000 ffffea0001200008 ffffea0001200008 0000000000000000
raw:
0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: unmovable page
WARNING: CPU: 25 PID: 1665 at mm/kasan/common.c:665
kasan_mem_notifier+0x34/0x23b
CPU: 25 PID: 1665 Comm: bash Tainted: G W 5.0.0+ #94
Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20
10/25/2017
RIP: 0010:kasan_mem_notifier+0x34/0x23b
RSP: 0018:
ffff8883ec737890 EFLAGS:
00010206
RAX:
0000000000000246 RBX:
ff10f0f4435f1000 RCX:
f887a7a21af88000
RDX:
dffffc0000000000 RSI:
0000000000000020 RDI:
ffff8881f221af88
RBP:
ffff8883ec737898 R08:
ffff888000000000 R09:
ffffffffb0bddcd0
R10:
ffffed103e857088 R11:
ffff8881f42b8443 R12:
dffffc0000000000
R13:
00000000fffffff9 R14:
dffffc0000000000 R15:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000560fbd31d730 CR3:
00000004049c6003 CR4:
00000000001606a0
Call Trace:
notifier_call_chain+0xbf/0x130
__blocking_notifier_call_chain+0x76/0xc0
blocking_notifier_call_chain+0x16/0x20
memory_notify+0x1b/0x20
__offline_pages+0x3e2/0x1210
offline_pages+0x11/0x20
memory_block_action+0x144/0x300
memory_subsys_offline+0xe5/0x170
device_offline+0x13f/0x1e0
state_store+0xeb/0x110
dev_attr_store+0x3f/0x70
sysfs_kf_write+0x104/0x150
kernfs_fop_write+0x25c/0x410
__vfs_write+0x66/0x120
vfs_write+0x15a/0x4f0
ksys_write+0xd2/0x1b0
__x64_sys_write+0x73/0xb0
do_syscall_64+0xeb/0xb78
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f14f75cc3b8
RSP: 002b:
00007ffe84d01d68 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
0000000000000008 RCX:
00007f14f75cc3b8
RDX:
0000000000000008 RSI:
0000563f8e433d70 RDI:
0000000000000001
RBP:
0000563f8e433d70 R08:
000000000000000a R09:
00007ffe84d018f0
R10:
000000000000000a R11:
0000000000000246 R12:
00007f14f789e780
R13:
0000000000000008 R14:
00007f14f7899740 R15:
0000000000000008
Link: http://lkml.kernel.org/r/20190320204255.53571-1-cai@lca.pw
Fixes:
7960509329c2 ("mm, memory_hotplug: print reason for the offlining failure")
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org> [5.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrei Vagin [Fri, 29 Mar 2019 03:44:13 +0000 (20:44 -0700)]
ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK
There are a few system calls (pselect, ppoll, etc) which replace a task
sigmask while they are running in a kernel-space
When a task calls one of these syscalls, the kernel saves a current
sigmask in task->saved_sigmask and sets a syscall sigmask.
On syscall-exit-stop, ptrace traps a task before restoring the
saved_sigmask, so PTRACE_GETSIGMASK returns the syscall sigmask and
PTRACE_SETSIGMASK does nothing, because its sigmask is replaced by
saved_sigmask, when the task returns to user-space.
This patch fixes this problem. PTRACE_GETSIGMASK returns saved_sigmask
if it's set. PTRACE_SETSIGMASK drops the TIF_RESTORE_SIGMASK flag.
Link: http://lkml.kernel.org/r/20181120060616.6043-1-avagin@gmail.com
Fixes:
29000caecbe8 ("ptrace: add ability to get/set signal-blocked mask")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
YueHaibing [Fri, 29 Mar 2019 03:44:09 +0000 (20:44 -0700)]
fs/proc/kcore.c: make kcore_modules static
Fix sparse warning:
fs/proc/kcore.c:591:19: warning:
symbol 'kcore_modules' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20190320135417.13272-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: James Morse <james.morse@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Fri, 29 Mar 2019 03:44:05 +0000 (20:44 -0700)]
include/linux/list.h: fix list_is_first() kernel-doc
Fix typo of kernel-doc parameter notation (there should be no space
between '@' and the parameter name).
Also fixes bogus kernel-doc notation output formatting.
Link: http://lkml.kernel.org/r/ddce8b80-9a8a-d52d-3546-87b2211c089a@infradead.org
Fixes:
70b44595eafe9 ("mm, compaction: use free lists to quickly locate a migration source")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oscar Salvador [Fri, 29 Mar 2019 03:44:01 +0000 (20:44 -0700)]
mm/debug.c: fix __dump_page when mapping->host is not set
While debugging something, I added a dump_page() into do_swap_page(),
and I got the splat from below. The issue happens when dereferencing
mapping->host in __dump_page():
...
else if (mapping) {
pr_warn("%ps ", mapping->a_ops);
if (mapping->host->i_dentry.first) {
struct dentry *dentry;
dentry = container_of(mapping->host->i_dentry.first, struct dentry, d_u.d_alias);
pr_warn("name:\"%pd\" ", dentry);
}
}
...
Swap address space does not contain an inode information, and so
mapping->host equals NULL.
Although the dump_page() call was added artificially into
do_swap_page(), I am not sure if we can hit this from any other path, so
it looks worth fixing it. We can easily do that by checking
mapping->host first.
Link: http://lkml.kernel.org/r/20190318072931.29094-1-osalvador@suse.de
Fixes:
1c6fb1d89e73c ("mm: print more information about mapping in __dump_page")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Fri, 29 Mar 2019 03:43:55 +0000 (20:43 -0700)]
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
When MPOL_MF_STRICT was specified and an existing page was already on a
node that does not follow the policy, mbind() should return -EIO. But
commit
6f4576e3687b ("mempolicy: apply page table walker on
queue_pages_range()") broke the rule.
And commit
c8633798497c ("mm: mempolicy: mbind and migrate_pages support
thp migration") didn't return the correct value for THP mbind() too.
If MPOL_MF_STRICT is set, ignore vma_migratable() to make sure it
reaches queue_pages_to_pte_range() or queue_pages_pmd() to check if an
existing page was already on a node that does not follow the policy.
And, non-migratable vma may be used, return -EIO too if MPOL_MF_MOVE or
MPOL_MF_MOVE_ALL was specified.
Tested with https://github.com/metan-ucw/ltp/blob/master/testcases/kernel/syscalls/mbind/mbind02.c
[akpm@linux-foundation.org: tweak code comment]
Link: http://lkml.kernel.org/r/1553020556-38583-1-git-send-email-yang.shi@linux.alibaba.com
Fixes:
6f4576e3687b ("mempolicy: apply page table walker on queue_pages_range()")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Cyril Hrubis <chrubis@suse.cz>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Souptick Joarder [Fri, 29 Mar 2019 03:43:51 +0000 (20:43 -0700)]
include/linux/hugetlb.h: convert to use vm_fault_t
kbuild produces the below warning:
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head:
5453a3df2a5eb49bc24615d4cf0d66b2aae05e5f
commit
3d3539018d2c ("mm: create the new vm_fault_t type")
reproduce:
# apt-get install sparse
git checkout
3d3539018d2cbd12e5af4a132636ee7fd8d43ef0
make ARCH=x86_64 allmodconfig
make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
>> mm/memory.c:3968:21: sparse: incorrect type in assignment (different
>> base types) @@ expected restricted vm_fault_t [usertype] ret @@
>> got e] ret @@
mm/memory.c:3968:21: expected restricted vm_fault_t [usertype] ret
mm/memory.c:3968:21: got int
This patch converts to return vm_fault_t type for hugetlb_fault() when
CONFIG_HUGETLB_PAGE=n.
Regarding the sparse warning, Luc said:
: This is the expected behaviour. The constant 0 is magic regarding bitwise
: types but ({ ...; 0; }) is not, it is just an ordinary expression of type
: 'int'.
:
: So, IMHO, Souptick's patch is the right thing to do.
Link: http://lkml.kernel.org/r/20190318162604.GA31553@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Boichat [Fri, 29 Mar 2019 03:43:46 +0000 (20:43 -0700)]
iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging
IOMMUs using ARMv7 short-descriptor format require page tables (level 1
and 2) to be allocated within the first 4GB of RAM, even on 64-bit
systems.
For level 1/2 pages, ensure GFP_DMA32 is used if CONFIG_ZONE_DMA32 is
defined (e.g. on arm64 platforms).
For level 2 pages, allocate a slab cache in SLAB_CACHE_DMA32. Note that
we do not explicitly pass GFP_DMA[32] to kmem_cache_zalloc, as this is
not strictly necessary, and would cause a warning in mm/sl*b.c, as we
did not update GFP_SLAB_BUG_MASK.
Also, print an error when the physical address does not fit in
32-bit, to make debugging easier in the future.
Link: http://lkml.kernel.org/r/20181210011504.122604-3-drinkcat@chromium.org
Fixes:
ad67f5a6545f ("arm64: replace ZONE_DMA with ZONE_DMA32")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Huaisheng Ye <yehs1@lenovo.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sasha Levin <Alexander.Levin@microsoft.com>
Cc: Tomasz Figa <tfiga@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Boichat [Fri, 29 Mar 2019 03:43:42 +0000 (20:43 -0700)]
mm: add support for kmem caches in DMA32 zone
Patch series "iommu/io-pgtable-arm-v7s: Use DMA32 zone for page tables",
v6.
This is a followup to the discussion in [1], [2].
IOMMUs using ARMv7 short-descriptor format require page tables (level 1
and 2) to be allocated within the first 4GB of RAM, even on 64-bit
systems.
For L1 tables that are bigger than a page, we can just use
__get_free_pages with GFP_DMA32 (on arm64 systems only, arm would still
use GFP_DMA).
For L2 tables that only take 1KB, it would be a waste to allocate a full
page, so we considered 3 approaches:
1. This series, adding support for GFP_DMA32 slab caches.
2. genalloc, which requires pre-allocating the maximum number of L2 page
tables (4096, so 4MB of memory).
3. page_frag, which is not very memory-efficient as it is unable to reuse
freed fragments until the whole page is freed. [3]
This series is the most memory-efficient approach.
stable@ note:
We confirmed that this is a regression, and IOMMU errors happen on 4.19
and linux-next/master on MT8173 (elm, Acer Chromebook R13). The issue
most likely starts from commit
ad67f5a6545f ("arm64: replace ZONE_DMA
with ZONE_DMA32"), i.e. 4.15, and presumably breaks a number of Mediatek
platforms (and maybe others?).
[1] https://lists.linuxfoundation.org/pipermail/iommu/2018-November/030876.html
[2] https://lists.linuxfoundation.org/pipermail/iommu/2018-December/031696.html
[3] https://patchwork.codeaurora.org/patch/671639/
This patch (of 3):
IOMMUs using ARMv7 short-descriptor format require page tables to be
allocated within the first 4GB of RAM, even on 64-bit systems. On arm64,
this is done by passing GFP_DMA32 flag to memory allocation functions.
For IOMMU L2 tables that only take 1KB, it would be a waste to allocate
a full page using get_free_pages, so we considered 3 approaches:
1. This patch, adding support for GFP_DMA32 slab caches.
2. genalloc, which requires pre-allocating the maximum number of L2
page tables (4096, so 4MB of memory).
3. page_frag, which is not very memory-efficient as it is unable
to reuse freed fragments until the whole page is freed.
This change makes it possible to create a custom cache in DMA32 zone using
kmem_cache_create, then allocate memory using kmem_cache_alloc.
We do not create a DMA32 kmalloc cache array, as there are currently no
users of kmalloc(..., GFP_DMA32). These calls will continue to trigger a
warning, as we keep GFP_DMA32 in GFP_SLAB_BUG_MASK.
This implies that calls to kmem_cache_*alloc on a SLAB_CACHE_DMA32
kmem_cache must _not_ use GFP_DMA32 (it is anyway redundant and
unnecessary).
Link: http://lkml.kernel.org/r/20181210011504.122604-2-drinkcat@chromium.org
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Sasha Levin <Alexander.Levin@microsoft.com>
Cc: Huaisheng Ye <yehs1@lenovo.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tomasz Figa <tfiga@google.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Darrick J. Wong [Fri, 29 Mar 2019 03:43:38 +0000 (20:43 -0700)]
ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that
we always grab cluster locks in order of increasing inode number.
Unfortunately, we forget to swap the inode record buffer head pointers
when we've done this, which leads to incorrect bookkeepping when we're
trying to make the two inodes have the same refcount tree.
This has the effect of causing filesystem shutdowns if you're trying to
reflink data from inode 100 into inode 97, where inode 100 already has a
refcount tree attached and inode 97 doesn't. The reflink code decides
to copy the refcount tree pointer from 100 to 97, but uses inode 97's
inode record to open the tree root (which it doesn't have) and blows up.
This issue causes filesystem shutdowns and metadata corruption!
Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia
Fixes:
29ac8e856cb369 ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 29 Mar 2019 03:43:34 +0000 (20:43 -0700)]
mm/hotplug: fix offline undo_isolate_page_range()
Commit
f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded
memory to zones until online") introduced move_pfn_range_to_zone() which
calls memmap_init_zone() during onlining a memory block.
memmap_init_zone() will reset pagetype flags and makes migrate type to
be MOVABLE.
However, in __offline_pages(), it also call undo_isolate_page_range()
after offline_isolated_pages() to do the same thing. Due to commit
2ce13640b3f4 ("mm: __first_valid_page skip over offline pages") changed
__first_valid_page() to skip offline pages, undo_isolate_page_range()
here just waste CPU cycles looping around the offlining PFN range while
doing nothing, because __first_valid_page() will return NULL as
offline_isolated_pages() has already marked all memory sections within
the pfn range as offline via offline_mem_sections().
Also, after calling the "useless" undo_isolate_page_range() here, it
reaches the point of no returning by notifying MEM_OFFLINE. Those pages
will be marked as MIGRATE_MOVABLE again once onlining. The only thing
left to do is to decrease the number of isolated pageblocks zone counter
which would make some paths of the page allocation slower that the above
commit introduced.
Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages
on ppc64, an "int" should still be enough to represent the number of
pageblocks there. Fix an incorrect comment along the way.
[cai@lca.pw: v4]
Link: http://lkml.kernel.org/r/20190314150641.59358-1-cai@lca.pw
Link: http://lkml.kernel.org/r/20190313143133.46200-1-cai@lca.pw
Fixes:
2ce13640b3f4 ("mm: __first_valid_page skip over offline pages")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Fri, 29 Mar 2019 03:43:30 +0000 (20:43 -0700)]
fs/open.c: allow opening only regular files during execve()
syzbot is hitting lockdep warning [1] due to trying to open a fifo
during an execve() operation. But we don't need to open non regular
files during an execve() operation, for all files which we will need are
the executable file itself and the interpreter programs like /bin/sh and
ld-linux.so.2 .
Since the manpage for execve(2) says that execve() returns EACCES when
the file or a script interpreter is not a regular file, and the manpage
for uselib(2) says that uselib() can return EACCES, and we use
FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non
regular file is requested with FMODE_EXEC set.
Since this deadlock followed by khungtaskd warnings is trivially
reproducible by a local unprivileged user, and syzbot's frequent crash
due to this deadlock defers finding other bugs, let's workaround this
deadlock until we get a chance to find a better solution.
[1] https://syzkaller.appspot.com/bug?id=
b5095bfec44ec84213bac54742a82483aad578ce
Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Reported-by: syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com>
Fixes:
8924feff66f35fe2 ("splice: lift pipe_lock out of splice_to_pipe()")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changbin Du [Fri, 29 Mar 2019 03:43:27 +0000 (20:43 -0700)]
mailmap: add Changbin Du
Add my email in the mailmap file to have a consistent shortlog output.
Link: http://lkml.kernel.org/r/20190308142103.4929-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 29 Mar 2019 03:43:23 +0000 (20:43 -0700)]
mm/debug.c: add a cast to u64 for atomic64_read()
atomic64_read() on ppc64le returns "long int", so fix the same way as
commit
d549f545e690 ("drm/virtio: use %llu format string form
atomic64_t") by adding a cast to u64, which makes it work on all arches.
In file included from ./include/linux/printk.h:7,
from ./include/linux/kernel.h:15,
from mm/debug.c:9:
mm/debug.c: In function 'dump_mm':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 19 has type 'long int' [-Wformat=]
#define KERN_SOH "A" /* ASCII Start Of Header */
^~~~~~
./include/linux/kern_levels.h:8:20: note: in expansion of macro
'KERN_SOH'
#define KERN_EMERG KERN_SOH "0" /* system is unusable */
^~~~~~~~
./include/linux/printk.h:297:9: note: in expansion of macro 'KERN_EMERG'
printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
mm/debug.c:133:2: note: in expansion of macro 'pr_emerg'
pr_emerg("mm %px mmap %px seqnum %llu task_size %lu"
^~~~~~~~
mm/debug.c:140:17: note: format string is defined here
"pinned_vm %llx data_vm %lx exec_vm %lx stack_vm %lx"
~~~^
%lx
Link: http://lkml.kernel.org/r/20190310183051.87303-1-cai@lca.pw
Fixes:
70f8a3ca68d3 ("mm: make mm->pinned_vm an atomic64 counter")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Fri, 29 Mar 2019 03:43:19 +0000 (20:43 -0700)]
mm/memory.c: fix modifying of page protection by insert_pfn()
Aneesh has reported that PPC triggers the following warning when
excercising DAX code:
IP set_pte_at+0x3c/0x190
LR insert_pfn+0x208/0x280
Call Trace:
insert_pfn+0x68/0x280
dax_iomap_pte_fault.isra.7+0x734/0xa40
__xfs_filemap_fault+0x280/0x2d0
do_wp_page+0x48c/0xa40
__handle_mm_fault+0x8d0/0x1fd0
handle_mm_fault+0x140/0x250
__do_page_fault+0x300/0xd60
handle_page_fault+0x18
Now that is WARN_ON in set_pte_at which is
VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep));
The problem is that on some architectures set_pte_at() cannot cope with
a situation where there is already some (different) valid entry present.
Use ptep_set_access_flags() instead to modify the pfn which is built to
deal with modifying existing PTE.
Link: http://lkml.kernel.org/r/20190311084537.16029-1-jack@suse.cz
Fixes:
b2770da64254 "mm: add vm_insert_mixed_mkwrite()"
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Chandan Rajendra <chandan@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 29 Mar 2019 03:43:15 +0000 (20:43 -0700)]
kasan: fix variable 'tag' set but not used warning
set_tag() compiles away when CONFIG_KASAN_SW_TAGS=n, so make
arch_kasan_set_tag() a static inline function to fix warnings below.
mm/kasan/common.c: In function '__kasan_kmalloc':
mm/kasan/common.c:475:5: warning: variable 'tag' set but not used [-Wunused-but-set-variable]
u8 tag;
^~~
Link: http://lkml.kernel.org/r/20190307185244.54648-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Malcolm Priestley [Wed, 27 Mar 2019 18:45:26 +0000 (18:45 +0000)]
staging: vt6655: Remove vif check from vnt_interrupt
A check for vif is made in vnt_interrupt_work.
There is a small chance of leaving interrupt disabled while vif
is NULL and the work hasn't been scheduled.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
CC: stable@vger.kernel.org # v4.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Thu, 28 Mar 2019 20:14:58 +0000 (04:14 +0800)]
staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()
After commit
419d6efc50e9, kernel cannot be crashed in the namei
path. However, corrupted nameoff can do harm in the process of
readdir for scenerios without dm-verity as well. Fix it now.
Fixes:
3aa8ec716e52 ("staging: erofs: add directory operations")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>