OSDN Git Service
Desmond Cheong Zhi Xi [Mon, 12 Jul 2021 04:35:08 +0000 (12:35 +0800)]
drm: protect drm_master pointers in drm_lease.c
drm_file->master pointers should be protected by
drm_device.master_mutex or drm_file.master_lookup_lock when being
dereferenced.
However, in drm_lease.c, there are multiple instances where
drm_file->master is accessed and dereferenced while neither lock is
held. This makes drm_lease.c vulnerable to use-after-free bugs.
We address this issue in 2 ways:
1. Add a new drm_file_get_master() function that calls drm_master_get
on drm_file->master while holding on to
drm_file.master_lookup_lock. Since drm_master_get increments the
reference count of master, this prevents master from being freed until
we unreference it with drm_master_put.
2. In each case where drm_file->master is directly accessed and
eventually dereferenced in drm_lease.c, we wrap the access in a call
to the new drm_file_get_master function, then unreference the master
pointer once we are done using it.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-6-desmondcheongzx@gmail.com
Desmond Cheong Zhi Xi [Mon, 12 Jul 2021 04:35:07 +0000 (12:35 +0800)]
drm: serialize drm_file.master with a new spinlock
Currently, drm_file.master pointers should be protected by
drm_device.master_mutex when being dereferenced. This is because
drm_file.master is not invariant for the lifetime of drm_file. If
drm_file is not the creator of master, then drm_file.is_master is
false, and a call to drm_setmaster_ioctl will invoke
drm_new_set_master, which then allocates a new master for drm_file and
puts the old master.
Thus, without holding drm_device.master_mutex, the old value of
drm_file.master could be freed while it is being used by another
concurrent process.
However, it is not always possible to lock drm_device.master_mutex to
dereference drm_file.master. Through the fbdev emulation code, this
might occur in a deep nest of other locks. But drm_device.master_mutex
is also the outermost lock in the nesting hierarchy, so this leads to
potential deadlocks.
To address this, we introduce a new spin lock at the bottom of the
lock hierarchy that only serializes drm_file.master. With this change,
the value of drm_file.master changes only when both
drm_device.master_mutex and drm_file.master_lookup_lock are
held. Hence, any process holding either of those locks can ensure that
the value of drm_file.master will not change concurrently.
Since no lock depends on the new drm_file.master_lookup_lock, when
drm_file.master is dereferenced, but drm_device.master_mutex cannot be
held, we can safely protect the master pointer with
drm_file.master_lookup_lock.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-5-desmondcheongzx@gmail.com
Desmond Cheong Zhi Xi [Mon, 12 Jul 2021 04:35:06 +0000 (12:35 +0800)]
drm: add a locked version of drm_is_current_master
While checking the master status of the DRM file in
drm_is_current_master(), the device's master mutex should be
held. Without the mutex, the pointer fpriv->master may be freed
concurrently by another process calling drm_setmaster_ioctl(). This
could lead to use-after-free errors when the pointer is subsequently
dereferenced in drm_lease_owner().
The callers of drm_is_current_master() from drm_auth.c hold the
device's master mutex, but external callers do not. Hence, we implement
drm_is_current_master_locked() to be used within drm_auth.c, and
modify drm_is_current_master() to grab the device's master mutex
before checking the master status.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-4-desmondcheongzx@gmail.com
Desmond Cheong Zhi Xi [Mon, 12 Jul 2021 04:35:05 +0000 (12:35 +0800)]
drm: avoid blocking in drm_clients_info's rcu section
Inside drm_clients_info, the rcu_read_lock is held to lock
pid_task()->comm. However, within this protected section, a call to
drm_is_current_master is made, which involves a mutex lock in a future
patch. However, this is illegal because the mutex lock might block
while in the RCU read-side critical section.
Since drm_is_current_master isn't protected by rcu_read_lock, we avoid
this by moving it out of the RCU critical section.
The following report came from intel-gfx ci's
igt@debugfs_test@read_all_entries testcase:
=============================
[ BUG: Invalid wait context ]
5.13.0-CI-Patchwork_20515+ #1 Tainted: G W
-----------------------------
debugfs_test/1101 is trying to lock:
ffff888132d901a8 (&dev->master_mutex){+.+.}-{3:3}, at:
drm_is_current_master+0x1e/0x50
other info that might help us debug this:
context-{4:4}
3 locks held by debugfs_test/1101:
#0:
ffff88810fdffc90 (&p->lock){+.+.}-{3:3}, at:
seq_read_iter+0x53/0x3b0
#1:
ffff888132d90240 (&dev->filelist_mutex){+.+.}-{3:3}, at:
drm_clients_info+0x63/0x2a0
#2:
ffffffff82734220 (rcu_read_lock){....}-{1:2}, at:
drm_clients_info+0x1b1/0x2a0
stack backtrace:
CPU: 8 PID: 1101 Comm: debugfs_test Tainted: G W
5.13.0-CI-Patchwork_20515+ #1
Hardware name: Intel Corporation CometLake Client Platform/CometLake S
UDIMM (ERB/CRB), BIOS CMLSFWR1.R00.1263.D00.
1906260926 06/26/2019
Call Trace:
dump_stack+0x7f/0xad
__lock_acquire.cold.78+0x2af/0x2ca
lock_acquire+0xd3/0x300
? drm_is_current_master+0x1e/0x50
? __mutex_lock+0x76/0x970
? lockdep_hardirqs_on+0xbf/0x130
__mutex_lock+0xab/0x970
? drm_is_current_master+0x1e/0x50
? drm_is_current_master+0x1e/0x50
? drm_is_current_master+0x1e/0x50
drm_is_current_master+0x1e/0x50
drm_clients_info+0x107/0x2a0
seq_read_iter+0x178/0x3b0
seq_read+0x104/0x150
full_proxy_read+0x4e/0x80
vfs_read+0xa5/0x1b0
ksys_read+0x5a/0xd0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-3-desmondcheongzx@gmail.com
Desmond Cheong Zhi Xi [Mon, 12 Jul 2021 04:35:04 +0000 (12:35 +0800)]
drm: avoid circular locks in drm_mode_getconnector
In preparation for a future patch to take a lock on
drm_device.master_mutex inside drm_is_current_master(), we first move
the call to drm_is_current_master() in drm_mode_getconnector out from the
section locked by &dev->mode_config.mutex. This avoids creating a
circular lock dependency.
Failing to avoid this lock dependency produces the following lockdep
splat:
======================================================
WARNING: possible circular locking dependency detected
5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted
------------------------------------------------------
kms_frontbuffer/1087 is trying to acquire lock:
ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40
but task is already holding lock:
ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&dev->mode_config.mutex){+.+.}-{3:3}:
__mutex_lock+0xab/0x970
drm_client_modeset_probe+0x22e/0xca0
__drm_fb_helper_initial_config_and_unlock+0x42/0x540
intel_fbdev_initial_config+0xf/0x20 [i915]
async_run_entry_fn+0x28/0x130
process_one_work+0x26d/0x5c0
worker_thread+0x37/0x380
kthread+0x144/0x170
ret_from_fork+0x1f/0x30
-> #1 (&client->modeset_mutex){+.+.}-{3:3}:
__mutex_lock+0xab/0x970
drm_client_modeset_commit_locked+0x1c/0x180
drm_client_modeset_commit+0x1c/0x40
__drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0
drm_fb_helper_set_par+0x34/0x40
intel_fbdev_set_par+0x11/0x40 [i915]
fbcon_init+0x270/0x4f0
visual_init+0xc6/0x130
do_bind_con_driver+0x1e5/0x2d0
do_take_over_console+0x10e/0x180
do_fbcon_takeover+0x53/0xb0
register_framebuffer+0x22d/0x310
__drm_fb_helper_initial_config_and_unlock+0x36c/0x540
intel_fbdev_initial_config+0xf/0x20 [i915]
async_run_entry_fn+0x28/0x130
process_one_work+0x26d/0x5c0
worker_thread+0x37/0x380
kthread+0x144/0x170
ret_from_fork+0x1f/0x30
-> #0 (&dev->master_mutex){+.+.}-{3:3}:
__lock_acquire+0x151e/0x2590
lock_acquire+0xd1/0x3d0
__mutex_lock+0xab/0x970
drm_is_current_master+0x1b/0x40
drm_mode_getconnector+0x37e/0x4a0
drm_ioctl_kernel+0xa8/0xf0
drm_ioctl+0x1e8/0x390
__x64_sys_ioctl+0x6a/0xa0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev->mode_config.mutex);
lock(&client->modeset_mutex);
lock(&dev->mode_config.mutex);
lock(&dev->master_mutex);
*** DEADLOCK ***
1 lock held by kms_frontbuffer/1087:
#0:
ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0
stack backtrace:
CPU: 7 PID: 1087 Comm: kms_frontbuffer Not tainted 5.13.0-rc7-CI-CI_DRM_10254+ #1
Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.
1906141750 06/14/2019
Call Trace:
dump_stack+0x7f/0xad
check_noncircular+0x12e/0x150
__lock_acquire+0x151e/0x2590
lock_acquire+0xd1/0x3d0
__mutex_lock+0xab/0x970
drm_is_current_master+0x1b/0x40
drm_mode_getconnector+0x37e/0x4a0
drm_ioctl_kernel+0xa8/0xf0
drm_ioctl+0x1e8/0x390
__x64_sys_ioctl+0x6a/0xa0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712043508.11584-2-desmondcheongzx@gmail.com
Jim Cromie [Wed, 14 Jul 2021 17:51:34 +0000 (11:51 -0600)]
drm/print: fixup spelling in a comment
s/prink/printk/ - no functional changes
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714175138.319514-2-jim.cromie@gmail.com
Guangming Cao [Tue, 20 Jul 2021 10:31:58 +0000 (18:31 +0800)]
dma_buf: remove dmabuf sysfs teardown before release
Dmabuf sysfs stat is used for dmabuf info track.
But these file maybe still in use after buffer released,
should clear it before buffer release.
Signed-off-by: Guangming Cao <Guangming.Cao@mediatek.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720103158.83439-1-guangming.cao@mediatek.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Yang Yingliang [Thu, 15 Jul 2021 13:28:45 +0000 (21:28 +0800)]
drm/bochs: Fix missing pci_disable_device() on error in bochs_pci_probe()
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() will be called in release automatically.
v3:
reformat commit message
update for move to tiny/
v2:
use pcim_enable_device()
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715132845.2415619-1-yangyingliang@huawei.com
KuoHsiang Chou [Fri, 9 Jul 2021 08:09:00 +0000 (16:09 +0800)]
drm/ast: Disable fast reset after DRAM initial
[Bug][AST2500]
V1:
When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization
have to be achieved by VGA driver with P2A (PCI to AHB) enabling.
However, HW suggests disable Fast reset mode after DRAM initializaton,
because fast reset mode is mainly designed for ARM ICE debugger.
Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be
first enabled to avoid system deadlock before disable fast reset mode.
V2:
Use to_pci_dev() to get revision of PCI configuration.
V3:
If SCU00 is not unlocked, just enter its password again.
It is unnecessary to clear AHB lock condition and restore WDT default
setting again, before Fast-reset clearing.
V4:
repatch after "error : could not build fake ancestor" resolved.
V5:
Since CVE_2019_6260 item3, Most of AST2500 have disabled P2A(PCIe to AMBA).
However, for backward compatibility, some patches about P2A, such as items
of v5.2 and v5.3, are considered to be upstreamed with comments.
1. Add define macro to improve source readability.
ast_drv.h, ast_main.c, ast_post.c
2. Add comment about "Fast restet" is enabled for ARM-ICE debugger
ast_post.c
3. Add comment about Reset USB port to patch USB unknown device issue
ast_post.c
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709080900.4056-1-kuohsiang_chou@aspeedtech.com
Ainux.Wang [Fri, 16 Jul 2021 01:56:15 +0000 (09:56 +0800)]
drm/ast: Zero is missing in detect function
The function ast_get_modes() will also return 0, when it try to get the
edid, but it also do not get the edid.
Signed-off-by: Ainux.Wang <ainux.wang@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716015615.9150-1-ainux.wang@gmail.com
Hridya Valsaraju [Tue, 13 Jul 2021 04:07:38 +0000 (21:07 -0700)]
dma-buf: Delete the DMA-BUF attachment sysfs statistics
The DMA-BUF attachment statistics form a subset of the DMA-BUF
sysfs statistics that recently merged to the drm-misc tree. They are not
UABI yet since they have not merged to the upstream Linux kernel.
Since there has been a reported a performance regression due to the
overhead of sysfs directory creation/teardown during
dma_buf_attach()/dma_buf_detach(), this patch deletes the DMA-BUF
attachment statistics from sysfs.
Fixes:
bdb8d06dfefd ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs")
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713040742.2680135-1-hridya@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Thomas Zimmermann [Thu, 15 Jul 2021 10:02:58 +0000 (12:02 +0200)]
drm/ingenic: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
This patch also fixes a bug where the driver didn't release the
IRQ.
v2:
* automatically release IRQ via devm_request_irq() (Paul)
* mention the bugfix (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715100258.6638-1-tzimmermann@suse.de
Xiyu Yang [Mon, 19 Jul 2021 05:59:45 +0000 (13:59 +0800)]
fbmem: Convert from atomic_t to refcount_t on fb_info->count
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1626674392-55857-1-git-send-email-xiyuyang19@fudan.edu.cn
Zheyu Ma [Wed, 14 Jul 2021 04:09:22 +0000 (04:09 +0000)]
video: fbdev: kyro: fix a DoS bug by restricting user input
The user can pass in any value to the driver through the 'ioctl'
interface. The driver dost not check, which may cause DoS bugs.
The following log reveals it:
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:SetOverlayViewPort+0x133/0x5f0 drivers/video/fbdev/kyro/STG4000OverlayDevice.c:476
Call Trace:
kyro_dev_overlay_viewport_set drivers/video/fbdev/kyro/fbdev.c:378 [inline]
kyrofb_ioctl+0x2eb/0x330 drivers/video/fbdev/kyro/fbdev.c:603
do_fb_ioctl+0x1f3/0x700 drivers/video/fbdev/core/fbmem.c:1171
fb_ioctl+0xeb/0x130 drivers/video/fbdev/core/fbmem.c:1185
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x19b/0x220 fs/ioctl.c:739
do_syscall_64+0x32/0x80 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1626235762-2590-1-git-send-email-zheyuma97@gmail.com
Antonio Borneo [Tue, 13 Jul 2021 14:49:41 +0000 (16:49 +0200)]
drm/stm: dsi: compute the transition time from LP to HS and back
The driver uses a conservative set of hardcoded values for the
maximum time delay of the transitions between LP and HS, either
for data and clock lanes.
By using the info in STM32MP157 datasheet, valid also for other ST
devices, compute the actual delay from the lane's bps.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713144941.3599-1-antonio.borneo@foss.st.com
Jagan Teki [Sun, 4 Jul 2021 13:59:14 +0000 (19:29 +0530)]
drm/stm: ltdc: Silence -EPROBE_DEFER till bridge attached
As dw-mipi-dsi supported all possible ways to find the DSI
devices. It can take multiple iterations for ltdc to find
all components attached to the DSI bridge.
The current ltdc driver failed to find the endpoint as
it returned -EINVAL for the first iteration itself. This leads
to following error:
[ 3.099289] [drm:ltdc_load] *ERROR* init encoder endpoint 0
So, check the return value and cleanup the encoder only if it's
not -EPROBE_DEFER. This make all components in the attached DSI
bridge found properly.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210704135914.268308-1-jagan@amarulasolutions.com
Linus Walleij [Wed, 14 Jul 2021 22:50:02 +0000 (00:50 +0200)]
drm/panel: ws2401: Add driver for WideChips WS2401
This adds a driver for panels based on the WideChips WS2401 display
controller. This display controller is used in the Samsung LMS380KF01
display found in the Samsung GT-I8160 (Codina) mobile phone and
possibly others.
As is common with Samsung displays manufacturer commands are necessary
to configure the display to a working state.
The display optionally supports internal backlight control, but can
also use an external backlight.
This driver re-uses the DBI infrastructure to communicate with the
display.
Cc: phone-devel@vger.kernel.org
Cc: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714225002.1065107-2-linus.walleij@linaro.org
Linus Walleij [Wed, 14 Jul 2021 22:50:01 +0000 (00:50 +0200)]
drm/panel: Add DT bindings for Samsung LMS380KF01
This adds device tree bindings for the Samsung Mobile Displays
LMS380KF01 RGB DPI display panel.
Cc: devicetree@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714225002.1065107-1-linus.walleij@linaro.org
Douglas Anderson [Wed, 14 Jul 2021 17:17:46 +0000 (10:17 -0700)]
drm/dp: For drm_panel_dp_aux_backlight(), init backlight as disabled
Even after the DP AUX backlight on my board worked OK after applying
the patch ("drm/panel-simple: Power the panel when probing DP AUX
backlight") [1], I still noticed some strange timeouts being reported
by ti_sn_aux_transfer(). Digging, I realized the problem was this:
* Even though `enabled` in `struct dp_aux_backlight` was false, the
base backlight structure (`base` in that structure) thought that the
backlight was powered on.
* If userspace wrote to sysfs in this state then we'd try to enable
the backlight.
* Unfortunatley, enabling the backlight didn't work because the panel
itself wasn't powered.
We can only use the backlight if the panel is on and the panel is not
officially on when we probe (it's temporarily just on enough for us to
talk to it).
The important thing we want here is to get `BL_CORE_FBBLANK` set since
userspace can't mess with that. This will keep us disabled until
drm_panel enables us, which means that the panel is enabled
first. Ideally we'd just set this in our `props` before calling
devm_backlight_device_register() but the comments in the header file
are pretty explicit that we're not supposed to much with the `state`
ourselves. Because of this, there may be a small window where the
backlight device is registered and someone could try to tweak with the
backlight. This isn't likely to happen and even if it did, I don't
believe this causes any huge problem.
[1] https://lore.kernel.org/lkml/
20210714093334.1.Idb41f87e5abae4aee0705db7458b0097fc50e7ab@changeid/
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714101744.1.Ifc22696b27930749915e383f0108b7bcdc015a6e@changeid
Douglas Anderson [Wed, 14 Jul 2021 16:33:50 +0000 (09:33 -0700)]
drm/panel-simple: Power the panel when probing DP AUX backlight
When I tried booting up a device that needed the DP AUX backlight, I
found an error in the logs:
panel-simple-dp-aux: probe of aux-ti_sn65dsi86.aux.0 failed with error -110
The aux transfers were failing because the panel wasn't powered. Just
like when reading the EDID we need to power the panel when trying to
talk to it. Add the needed pm_runtime calls.
After I do this I can successfully probe the panel and adjust the
backlight on my board.
Fixes:
bfd451403d70 ("drm/panel-simple: Support DP AUX backlight")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714093334.1.Idb41f87e5abae4aee0705db7458b0097fc50e7ab@changeid
Steven Price [Wed, 14 Jul 2021 14:33:00 +0000 (15:33 +0100)]
drm/of: free the iterator object on failure
When bailing out due to the sanity check the iterator value needs to be
freed because the early return prevents for_each_child_of_node() from
doing the dereference itself.
Fixes:
6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714143300.20632-1-steven.price@arm.com
Thomas Zimmermann [Tue, 6 Jul 2021 07:31:25 +0000 (09:31 +0200)]
drm/omapdrm: Remove outdated comment
The comment refers to drm_irq_install() et al, which are not used by
omapdrm. The functions are part of the DRM IRQ midlayer and shouldn't
be used any longer. Remove the comment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706073125.7689-1-tzimmermann@suse.de
Thomas Zimmermann [Tue, 6 Jul 2021 07:50:11 +0000 (09:50 +0200)]
drm/vbox: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706075011.9009-1-tzimmermann@suse.de
Thomas Zimmermann [Tue, 6 Jul 2021 07:47:35 +0000 (09:47 +0200)]
drm/qxl: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706074735.8849-1-tzimmermann@suse.de
Maxime Ripard [Wed, 7 Jul 2021 14:19:30 +0000 (16:19 +0200)]
drm/vc4: hdmi: Remove drm_encoder->crtc usage
The drm_encoder crtc pointer isn't really fit for an atomic driver,
let's rely on the connector state instead.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707141930.1811128-1-maxime@cerno.tech
Maxime Ripard [Wed, 7 Jul 2021 09:51:12 +0000 (11:51 +0200)]
drm/vc4: hdmi: Only call into DRM framework if registered
Our hotplug handler will currently call the drm_kms_helper_hotplug_event
every time a hotplug interrupt is called.
However, since the device is registered after all the drivers have
finished their bind callback, we have a window between when we install
our interrupt handler and when drm_dev_register() is eventually called
where our handler can run and call drm_kms_helper_hotplug_event but the
device hasn't been registered yet, causing a null pointer dereference.
Fix this by making sure we only call drm_kms_helper_hotplug_event if our
device has been properly registered.
Fixes:
f4790083c7c2 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-4-maxime@cerno.tech
Maxime Ripard [Wed, 7 Jul 2021 09:51:11 +0000 (11:51 +0200)]
drm/vc4: hdmi: Drop devm interrupt handler for hotplug interrupts
The hotplugs interrupt handlers are registered through the
devm_request_threaded_irq function. However, while free_irq is indeed
called properly when the device is unbound or bind fails, it's called
after unbind or bind is done.
In our particular case, it means that on failure it creates a window
where our interrupt handler can be called, but we're freeing every
resource (CEC adapter, DRM objects, etc.) it might need.
In order to address this, let's switch to the non-devm variant to
control better when the handler will be unregistered and allow us to
make it safe.
Fixes:
f4790083c7c2 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-3-maxime@cerno.tech
Christophe Branchereau [Fri, 25 Jun 2021 12:10:45 +0000 (13:10 +0100)]
drm/panel: Add Innolux EJ030NA 3.0" 320x480 panel
Add support for the Innolux/Chimei EJ030NA 3.0"
320x480 TFT panel.
This panel can be found in the LDKs, RS97 V2.1 and RG300 (non IPS)
handheld gaming consoles.
While being 320x480, it is actually a horizontal 4:3
panel with non-square pixels in delta arrangement.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625121045.81711-2-paul@crapouillou.net
Paul Cercueil [Fri, 25 Jun 2021 12:10:44 +0000 (13:10 +0100)]
dt-bindings: display/panel: Add Innolux EJ030NA
Add binding for the Innolux EJ030NA panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625121045.81711-1-paul@crapouillou.net
Daniel Vetter [Thu, 3 Jun 2021 16:41:12 +0000 (18:41 +0200)]
drm/shmem-helper: Align to page size in dumb_create
shmem helpers seem a bit sloppy here by automatically rounding up when
actually creating the buffer, which results in under-reporting of what
we actually have. Caught by igt/vgem_basic tests.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603164113.1433476-4-daniel.vetter@ffwll.ch
Douglas Anderson [Mon, 12 Jul 2021 15:00:44 +0000 (08:00 -0700)]
drm/dp: Move panel DP AUX backlight support to drm_dp_helper
We were getting a depmod error:
depmod: ERROR: Cycle detected: drm_kms_helper -> drm -> drm_kms_helper
It looks like the rule is that drm_kms_helper can call into drm, but
drm can't call into drm_kms_helper. That means we've got to move the
DP AUX backlight support into drm_dp_helper.
NOTE: as part of this, I didn't try to do any renames of the main
registration function. Even though it's in the drm_dp_helper, it still
feels very parallel to drm_panel_of_backlight().
Fixes:
10f7b40e4f30 ("drm/panel: add basic DP AUX backlight support")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rajeev Nandan <rajeevny@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210712075933.v2.1.I23eb4cc5a680341e7b3e791632a635566fa5806a@changeid
Thomas Zimmermann [Mon, 5 Jul 2021 07:46:33 +0000 (09:46 +0200)]
drm/vkms: Use dma-buf mapping from shadow-plane state for composing
Store the shadow-buffer mapping's address in struct vkms_composer and
use the value when composing the output. It's the same value as stored
in the GEM SHMEM BO, but frees the composer code from its dependency
on GEM SHMEM.
Using struct dma_buf_map is how framebuffer access is supposed to be.
The long-term plan is to perform all framebuffer access via struct
dma_buf_map and avoid the details of accessing I/O and system memory.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-5-tzimmermann@suse.de
Thomas Zimmermann [Mon, 5 Jul 2021 07:46:32 +0000 (09:46 +0200)]
drm/vkms: Let shadow-plane helpers prepare the plane's FB
Replace vkms' prepare_fb and cleanup_fb functions with the generic
code for shadow-buffered planes. No functional changes.
This change also fixes a problem where IGT kms_flip tests would
create a segmentation fault within vkms. The driver's prepare_fb
function did not report an error if a BO's vmap operation failed.
The kernel later tried to operate on the non-mapped memory areas.
The shared shadow-plane helpers handle errors correctly, so that
the driver now avoids the segmantation fault.
v2:
* include paragraph about IGT tests in commit message (Melissa)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-4-tzimmermann@suse.de
Thomas Zimmermann [Mon, 5 Jul 2021 07:46:31 +0000 (09:46 +0200)]
drm/vkms: Inherit plane state from struct drm_shadow_plane_state
Subclass struct drm_shadow_plane_state for VKMS planes and update
all plane-state callbacks accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-3-tzimmermann@suse.de
Thomas Zimmermann [Mon, 5 Jul 2021 07:46:30 +0000 (09:46 +0200)]
drm/gem: Export implementation of shadow-plane helpers
Export the implementation of duplicate, destroy and reset helpers for
shadow-buffered plane state. Useful for drivers that subclass struct
drm_shadow_plane_state.
The exported functions are wrappers around plane-state implementation,
but using them is the correct thing to do for drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705074633.9425-2-tzimmermann@suse.de
Thomas Zimmermann [Tue, 13 Jul 2021 09:02:35 +0000 (11:02 +0200)]
Revert "drm/vgem: Implement mmap as GEM object function"
Commit
375cca1cfeb5 ("drm/vgem: Implement mmap as GEM object function")
broke several IGT tests in vgem_basic. [1] Attempts to fix the issue
have not worked out so far. [2][3] Revert the change for now.
Note that there is a patch that converts vgem to shmem helpers. [4]
Merging this change would be preferable to modifying vgem's mmap code.
v2:
* fix spelling error in commit message (Daniel)
[1] https://intel-gfx-ci.01.org/tree/drm-tip/igt@vgem_basic@unload.html
[2] https://lore.kernel.org/intel-gfx/
20210709154256.12005-1-tzimmermann@suse.de/
[3] https://lore.kernel.org/intel-gfx/
20210712123321.3658-1-tzimmermann@suse.de/
[4] https://patchwork.freedesktop.org/series/90671/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
375cca1cfeb5 ("drm/vgem: Implement mmap as GEM object function")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Qinglang Miao <miaoqinglang@huawei.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713090235.26372-1-tzimmermann@suse.de
Sam Ravnborg [Sat, 10 Jul 2021 08:42:40 +0000 (10:42 +0200)]
drm: bridge: Mark deprecated operations in drm_bridge_funcs
drm_bridge_funcs includes several duplicated operations as atomic
variants have been added over time.
New bridge drivers shall use the atomic variants - mark the deprecated
operations to try to avoid usage in new bridge drivers.
v2:
- Drop out-dated comment about state in mode_set (Laurent)
- Added missing "the" in a description
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210710084240.281063-1-sam@ravnborg.org
Julia Lawall [Fri, 9 Jul 2021 20:07:17 +0000 (22:07 +0200)]
drm/of: free the right object
There is no need to free a NULL value. Instead, free the object
that is leaking due to the iterator.
The semantic patch that finds this problem is as follows:
// <smpl>
@@
expression x,e;
identifier f;
@@
x = f(...);
if (x == NULL) {
... when any
when != x = e
* of_node_put(x);
...
}
// </smpl>
Fixes:
6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200717.3676376-1-Julia.Lawall@inria.fr
ChunyouTang [Thu, 8 Jul 2021 07:34:06 +0000 (15:34 +0800)]
drm/panfrost:fix the exception name always "UNKNOWN"
The exception_code in register is only 8 bits,So if
fault_status in panfrost_gpu_irq_handler() don't
(& 0xFF),it can't get correct exception reason.
and it's better to show all of the register value
to custom,so it's better fault_status don't (& 0xFF).
Signed-off-by: ChunyouTang <tangchunyou@icubecorp.cn>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708073407.2015-1-tangchunyou@163.com
Jagan Teki [Sun, 4 Jul 2021 09:34:33 +0000 (15:04 +0530)]
drm: bridge: nwl-dsi: Drop unused nwl_dsi_plat_clk_config
nwl_dsi_plat_clk_config structure added in below commit but not
used anywhere in the driver.
commit <
44cfc6233447c> ("drm/bridge: Add NWL MIPI DSI host controller
support")
Drop it.
Cc: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210704093433.27717-1-jagan@amarulasolutions.com
Stefan Riedmueller [Fri, 9 Jul 2021 20:03:49 +0000 (22:03 +0200)]
drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
panel to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200349.2665205-2-y.bas@phytec.de
Stefan Riedmueller [Fri, 9 Jul 2021 20:03:48 +0000 (22:03 +0200)]
drm/panel: simple: Add support for EDT ETMV570G2DHU panel
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200349.2665205-1-y.bas@phytec.de
Yunus Bas [Fri, 9 Jul 2021 20:09:13 +0000 (22:09 +0200)]
dt-bindings: display: simple: Add EDT ETM0350G0DH6
The Emerging Display Technology ETM0350G0DH6 is a 3.5" WVGA TFT panel
with capacitive multitouch. Add it to the list of compatibles.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200913.2666570-2-y.bas@phytec.de
Yunus Bas [Fri, 9 Jul 2021 20:09:12 +0000 (22:09 +0200)]
dt-bindings: display: simple: Add EDT ETMV570G2DHU
The Emerging Display Technology ETMV570G2DHU is a 5.7" VGA TFT panel.
Add it to the list of compatibles.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709200913.2666570-1-y.bas@phytec.de
Jing Xiangfeng [Tue, 29 Jun 2021 11:59:56 +0000 (19:59 +0800)]
drm/gma500: Add the missed drm_gem_object_put() in psb_user_framebuffer_create()
psb_user_framebuffer_create() misses to call drm_gem_object_put() in an
error path. Add the missed function call to fix it.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629115956.15160-1-jingxiangfeng@huawei.com
Linus Walleij [Thu, 1 Jul 2021 21:36:18 +0000 (23:36 +0200)]
drm/panel: Fix up DT bindings for Samsung lms397kf04
Improve the bindings and make them more usable:
- Pick in spi-cpha and spi-cpol from the SPI node parent,
this will specify that we are "type 3" in the device tree
rather than hardcoding it in the operating system.
- Drop the u32 ref from the SPI frequency: comes in from
the SPI host bindings.
- Make spi-cpha, spi-cpol and port compulsory.
- Update the example with a real-world SPI controller,
spi-gpio.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701213618.3818821-1-linus.walleij@linaro.org
Rajeev Nandan [Sat, 26 Jun 2021 16:51:08 +0000 (22:21 +0530)]
drm/panel-simple: Add Samsung ATNA33XC20
Add Samsung 13.3" FHD eDP AMOLED panel.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-7-git-send-email-rajeevny@codeaurora.org
Rajeev Nandan [Sat, 26 Jun 2021 16:51:07 +0000 (22:21 +0530)]
dt-bindings: display: simple: Add Samsung ATNA33XC20
Add Samsung 13.3" FHD eDP AMOLED panel.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-6-git-send-email-rajeevny@codeaurora.org
Rajeev Nandan [Sat, 26 Jun 2021 16:51:06 +0000 (22:21 +0530)]
drm/panel-simple: Update validation warnings for eDP panel description
Do not give a warning for the eDP panels if the "bus_format" is
not specified, since most eDP panels can support more than one
bus formats and this can be auto-detected.
Also, update the check to include bpc=10 for the eDP panel.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-5-git-send-email-rajeevny@codeaurora.org
Rajeev Nandan [Sat, 26 Jun 2021 16:51:05 +0000 (22:21 +0530)]
drm/panel-simple: Support for delays between GPIO & regulator
Some panels datasheets may specify a delay between the enable GPIO and
the regulator. Support this in panel-simple.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-4-git-send-email-rajeevny@codeaurora.org
Rajeev Nandan [Sat, 26 Jun 2021 16:51:04 +0000 (22:21 +0530)]
drm/panel-simple: Support DP AUX backlight
If there is no backlight specified in the device tree and the panel
has access to the DP AUX channel then create a DP AUX backlight if
supported by the panel.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-3-git-send-email-rajeevny@codeaurora.org
Rajeev Nandan [Sat, 26 Jun 2021 16:51:03 +0000 (22:21 +0530)]
drm/panel: add basic DP AUX backlight support
Some panels support backlight control over DP AUX channel using
VESA's standard backlight control interface.
Using new DRM eDP backlight helpers, add support to create and
register a backlight for those panels in drm_panel to simplify
the panel drivers.
The panel driver with access to "struct drm_dp_aux" can create and
register a backlight device using following code snippet in its
probe() function:
err = drm_panel_dp_aux_backlight(panel, aux);
if (err)
return err;
Then drm_panel will handle backlight_(enable|disable) calls
similar to the case when drm_panel_of_backlight() is used.
Currently, we are not supporting one feature where the source
device can combine the backlight brightness levels set through
DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not
required for the basic backlight controls, it can be added later.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[dianders: added blank line for warning when applying]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-2-git-send-email-rajeevny@codeaurora.org
Christian König [Fri, 2 Jul 2021 11:16:42 +0000 (13:16 +0200)]
drm/msm: always wait for the exclusive fence
Drivers also need to to sync to the exclusive fence when
a shared one is present.
Completely untested since the driver won't even compile on !ARM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702111642.17259-5-christian.koenig@amd.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Harshvardhan Jha [Fri, 9 Jul 2021 07:39:59 +0000 (13:09 +0530)]
drm/gma500: Fix end of loop tests for list_for_each_entry
The list_for_each_entry() iterator, "connector" in this code, can never be
NULL. If we exit the loop without finding the correct connector then
"connector" points invalid memory that is an offset from the list head.
This will eventually lead to memory corruption and presumably a kernel
crash.
Fixes:
9bd81acdb648 ("gma500: Convert Oaktrail to work with new output handling")
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709073959.11443-1-harshvardhan.jha@oracle.com
Beatriz Martins de Carvalho [Thu, 8 Jul 2021 09:20:02 +0000 (10:20 +0100)]
drm/vkms: Create a debugfs file to get vkms config data
Creating a vkms_config debugfs file in vkms_drv.c to get/track vkms config
data, for the long-term plan of making vkms configurable and have multiple
different instances.
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708092002.11847-1-martinsdecarvalhobeatriz@gmail.com
Christian König [Sun, 6 Jun 2021 09:50:15 +0000 (11:50 +0200)]
drm/nouveau: always wait for the exclusive fence
Drivers also need to to sync to the exclusive fence when
a shared one is present.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702111642.17259-4-christian.koenig@amd.com
Christian König [Sun, 6 Jun 2021 09:46:33 +0000 (11:46 +0200)]
dma-buf: fix dma_resv_test_signaled test_all handling v2
As the name implies if testing all fences is requested we
should indeed test all fences and not skip the exclusive
one because we see shared ones.
v2: fix logic once more
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702111642.17259-3-christian.koenig@amd.com
Noralf Trønnes [Sat, 3 Jul 2021 14:13:21 +0000 (16:13 +0200)]
drm/gud: Add async_flush module parameter
Provide a way for userspace to choose synchronous flushing/pageflips.
This helps save CPU and power.
It is also useful for test scripts since userspace can know when a flush
has happended and wait before doing the next visual test.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20210703141321.35494-2-noralf@tronnes.org
Noralf Trønnes [Sat, 3 Jul 2021 14:13:20 +0000 (16:13 +0200)]
drm/gud: Add Raspberry Pi Pico ID
Add VID/PID for the Raspberry Pi Pico implementation.
Source: https://github.com/notro/gud-pico
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20210703141321.35494-1-noralf@tronnes.org
Noralf Trønnes [Thu, 1 Jul 2021 17:07:48 +0000 (19:07 +0200)]
drm/gud: Use scatter-gather USB bulk transfer
There'a limit to how big a kmalloc buffer can be, and as memory gets
fragmented it becomes more difficult to get big buffers. The downside of
smaller buffers is that the driver has to split the transfer up which
hampers performance. Compression might also take a hit because of the
splitting.
Solve this by allocating the transfer buffer using vmalloc and create a
SG table to be passed on to the USB subsystem. vmalloc_32() is used to
avoid DMA bounce buffers on USB controllers that can only access 32-bit
addresses.
This also solves the problem that split transfers can give host side
tearing since flushing is decoupled from rendering.
usb_sg_wait() doesn't have timeout handling builtin, so it is wrapped in
a timer like 4 out of 6 users in the kernel have done.
v2:
- Use DIV_ROUND_UP (Linus)
- Add timeout note to the commit log (Linus)
- Expand note about upper buffer limit (Linus)
- Change var name s/timer/ctx/ in gud_usb_bulk_timeout()
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-2-noralf@tronnes.org
Noralf Trønnes [Thu, 1 Jul 2021 17:07:47 +0000 (19:07 +0200)]
drm/gud: Free buffers on device removal
Free transfer and compression buffers on device removal instead of at
DRM device removal time. This ensures that the usual 2x8MB buffers are
released when the device is unplugged and not kept around should
userspace keep the DRM device fd open.
At least Ubuntu 20.04 doesn't release the DRM device on unplug.
The damage_lock mutex is not destroyed because it is used outside the
drm_dev_enter/exit block in gud_pipe_update(). AFAICT it's possible for
an open fbdev descriptor to trigger a commit after the USB device is gone.
v2: Don't destroy damage_lock
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701170748.58009-1-noralf@tronnes.org
Thomas Zimmermann [Tue, 6 Jul 2021 07:54:25 +0000 (09:54 +0200)]
drm/hisilicon/hibmc: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706075425.9257-1-tzimmermann@suse.de
Thomas Zimmermann [Tue, 6 Jul 2021 07:22:53 +0000 (09:22 +0200)]
drm/vmwgfx: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Vmwgfx already uses Linux IRQ functions. All that's left to replace
is the reference to struct drm_device.irq. Use irq value of struct
pci_dev instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706072253.6844-1-tzimmermann@suse.de
Thomas Zimmermann [Tue, 6 Jul 2021 07:27:12 +0000 (09:27 +0200)]
drm/arm/komeda: Don't include drm_irq.h
The header file is not required. Don't include it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706072712.7558-1-tzimmermann@suse.de
Thomas Zimmermann [Tue, 6 Jul 2021 07:45:45 +0000 (09:45 +0200)]
drm/meson: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706074545.8763-1-tzimmermann@suse.de
Thomas Zimmermann [Thu, 24 Jun 2021 09:05:00 +0000 (11:05 +0200)]
drm/qxl: Remove empty qxl_gem_prime_mmap()
The function qxl_gem_prime_mmap() returns an error. The two callers
of gem_prime_mmap are drm_fbdev_fb_mmap() and drm_gem_dmabuf_mmap(),
which both already handle NULL-callbacks with an error code. So clear
gem_prime_mmap in qxl and remove qxl_gem_prime_mmap().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624090500.8320-1-tzimmermann@suse.de
Beatriz Martins de Carvalho [Tue, 6 Jul 2021 15:45:10 +0000 (16:45 +0100)]
drm/vkms: replace macro in vkms_release()
Replace macro in vkms_release()
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706154510.224695-1-martinsdecarvalhobeatriz@gmail.com
Tim Gover [Mon, 28 Jun 2021 13:05:33 +0000 (15:05 +0200)]
drm: vc4: Fix pixel-wrap issue with DVP teardown
Adjust the DVP enable/disable sequence to avoid a pixel getting stuck
in an internal, non resettable FIFO within PixelValve when changing
HDMI resolution.
The blank pixels features of the DVP can prevent signals back to
pixelvalve causing it to not clear the FIFO. Adjust the ordering
and timing of operations to ensure the clear signal makes it through to
pixelvalve.
Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210628130533.144617-1-maxime@cerno.tech
Nicolas Saenz Julienne [Tue, 29 Jun 2021 12:17:23 +0000 (14:17 +0200)]
drm/vc4: hdmi: Limit noise when deferring snd card registration
We don't want to print an error message each time
devm_snd_soc_register_card() returns -EPROBE_DEFER, the function will
most likely succeed some time in the future, once the missing resources
are available. So use dev_err_probe(), which will redirect the messages
to the debug log level in such case.
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629121723.11523-1-nsaenzju@redhat.com
Thomas Zimmermann [Thu, 24 Jun 2021 09:52:38 +0000 (11:52 +0200)]
drm/vgem: Implement mmap as GEM object function
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective vgem functions are being removed. The file_operations
structure vgem_driver_fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624095238.8804-1-tzimmermann@suse.de
Thomas Zimmermann [Fri, 2 Jul 2021 07:56:42 +0000 (09:56 +0200)]
drm/mgag200: Constify LUT for programming bpp
Declare constant LUT for bpp programming as static const. Removes mutable
data from device structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-5-tzimmermann@suse.de
Thomas Zimmermann [Fri, 2 Jul 2021 07:56:41 +0000 (09:56 +0200)]
drm/mgag200: Extract device type and flags in mgag200_pci_probe()
The type and flags values are stored in the PCI ID list. Extract them
in the probe function. Makes the device initialization more readable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-4-tzimmermann@suse.de
Thomas Zimmermann [Fri, 2 Jul 2021 07:56:40 +0000 (09:56 +0200)]
drm/mgag200: Inline mgag200_device_init()
Inline mgag200_device_init() into mgag200_device_create(), which is
the only caller. Also remove a duplicate error message for
mgag200_modeset_init(). The function will print an error if/where it
failed.
v2:
* include a note about the removed error message in
changelog (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-3-tzimmermann@suse.de
Thomas Zimmermann [Fri, 2 Jul 2021 07:56:39 +0000 (09:56 +0200)]
drm/mgag200: Don't pass flags to drm_dev_register()
The flags argument is only relevant for UMS drivers. Pass 0.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075642.27834-2-tzimmermann@suse.de
Thomas Zimmermann [Fri, 2 Jul 2021 07:54:34 +0000 (09:54 +0200)]
drm/vram-helper: Unexport drm_vram_helper_{alloc,release}_mm()
All GEM-VRAM-based drivers use auto-cleanup via drmm_vram_helper_init().
Unexport the manual APIs and make them internal implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075434.27677-4-tzimmermann@suse.de
Thomas Zimmermann [Fri, 2 Jul 2021 07:54:33 +0000 (09:54 +0200)]
drm/bochs: Use managed initialization for GEM VRAM helpers
Convert to managed GEM VRAM initialization and switch bochs to
full autocleanup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075434.27677-3-tzimmermann@suse.de
Thomas Zimmermann [Fri, 2 Jul 2021 07:54:32 +0000 (09:54 +0200)]
drm/bochs: Move to tiny/
The bochs driver is only ~600 lines of code. Putting it into tiny/
cleans up the DRM directory slightly. Some style problems were fixed
and unneeded include statements were removed. No functional changes.
v2:
* make bochs_mode_funcs static (Daniel, kernel test robot)
* rebase onto aperture API changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702075434.27677-2-tzimmermann@suse.de
Linus Walleij [Fri, 2 Jul 2021 13:56:01 +0000 (15:56 +0200)]
drm/dbi: Print errors for mipi_dbi_command()
The macro mipi_dbi_command() does not report errors unless you wrap it
in another macro to do the error reporting.
Report a rate-limited error so we know what is going on.
After this any code wishing to send command arrays can rely on
mipi_dbi_command() providing an appropriate error message if something
goes wrong.
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702135601.3952726-1-linus.walleij@linaro.org
Melissa Wen [Sat, 26 Jun 2021 09:26:55 +0000 (10:26 +0100)]
drm/vkms: update the current status of todo list
Update:
- debugging issues on igt testcases
- plane composition features: add primary plane improvements
- suggestions of good tasks to start working on vkms
Drop:
- syzkaller bug report:
what triggered the warning was replaced by shmem functions at
https://patchwork.freedesktop.org/patch/394614/
- overlay plane: this feature was added by
https://patchwork.freedesktop.org/patch/430941/
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626092655.ghmmt2yux5klrne7@smtp.gmail.com
Thomas Zimmermann [Tue, 29 Jun 2021 13:58:33 +0000 (15:58 +0200)]
drm/aperture: Pass DRM driver structure instead of driver name
Print the name of the DRM driver when taking over fbdev devices. Makes
the output to dmesg more consistent. Note that the driver name is only
used for printing a string to the kernel log. No UAPI is affected by this
change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i
Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson
Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
Boris Brezillon [Wed, 30 Jun 2021 06:27:51 +0000 (08:27 +0200)]
drm/panfrost: Increase the AS_ACTIVE polling timeout
Experience has shown that 1ms is sometimes not enough, even when the GPU
is running at its maximum frequency, not to mention that an MMU operation
might take longer if the GPU is running at a lower frequency, which is
likely to be the case if devfreq is active.
Let's pick a significantly bigger timeout value (1ms -> 100ms) to be on
the safe side.
v5:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-17-boris.brezillon@collabora.com
Steven Price [Wed, 30 Jun 2021 06:27:50 +0000 (08:27 +0200)]
drm/panfrost: Queue jobs on the hardware
The hardware has a set of '_NEXT' registers that can hold a second job
while the first is executing. Make use of these registers to enqueue a
second job per slot.
v5:
* Fix a comment in panfrost_job_init()
v3:
* Fix the done/err job dequeuing logic to get a valid active state
* Only enable the second slot on GPUs supporting jobchain disambiguation
* Split interrupt handling in sub-functions
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-16-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:49 +0000 (08:27 +0200)]
drm/panfrost: Kill in-flight jobs on FD close
If the process who submitted these jobs decided to close the FD before
the jobs are done it probably means it doesn't care about the result.
v5:
* Add a panfrost_exception_is_fault() helper and the
DRM_PANFROST_EXCEPTION_MAX_NON_FAULT value
v4:
* Don't disable/restore irqs when taking the job_lock (not needed since
this lock is never taken from an interrupt context)
v3:
* Set fence error to ECANCELED when a TERMINATED exception is received
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-15-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:48 +0000 (08:27 +0200)]
drm/panfrost: Don't reset the GPU on job faults unless we really have to
If we can recover from a fault without a reset there's no reason to
issue one.
v3:
* Drop the mention of Valhall requiring a reset on JOB_BUS_FAULT
* Set the fence error to -EINVAL instead of having per-exception
error codes
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-14-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:47 +0000 (08:27 +0200)]
drm/panfrost: Reset the GPU when the AS_ACTIVE bit is stuck
Things are unlikely to resolve until we reset the GPU. Let's not wait
for other faults/timeout to happen to trigger this reset.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-13-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:46 +0000 (08:27 +0200)]
drm/panfrost: Disable the AS on unhandled page faults
If we don't do that, we have to wait for the job timeout to expire
before the fault jobs gets killed.
v3:
* Make sure the AS is re-enabled when new jobs are submitted to the
context
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-12-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:45 +0000 (08:27 +0200)]
drm/panfrost: Make sure job interrupts are masked before resetting
This is not yet needed because we let active jobs be killed during by
the reset and we don't really bother making sure they can be restarted.
But once we start adding soft-stop support, controlling when we deal
with the remaining interrrupts and making sure those are handled before
the reset is issued gets tricky if we keep job interrupts active.
Let's prepare for that and mask+flush job IRQs before issuing a reset.
v4:
* Add a comment explaining why we WARN_ON(!job) in the irq handler
* Keep taking the job_lock when evicting stalled jobs
v3:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-11-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:44 +0000 (08:27 +0200)]
drm/panfrost: Simplify the reset serialization logic
Now that we can pass our own workqueue to drm_sched_init(), we can use
an ordered workqueue on for both the scheduler timeout tdr and our own
reset work (which we use when the reset is not caused by a fault/timeout
on a specific job, like when we have AS_ACTIVE bit stuck). This
guarantees that the timeout handlers and reset handler can't run
concurrently which drastically simplifies the locking.
v5:
* Don't call cancel_delayed_timeout() in the reset path (those works
are canceled in drm_sched_stop())
v4:
* Actually pass the reset workqueue to drm_sched_init()
* Don't call cancel_work_sync() in panfrost_reset(). It will deadlock
since it might be called from the reset work, which is executing and
cancel_work_sync() will wait for the handler to return. Checking the
reset pending status should avoid spurious resets
v3:
* New patch
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-10-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:43 +0000 (08:27 +0200)]
drm/panfrost: Use a threaded IRQ for job interrupts
This should avoid switching to interrupt context when the GPU is under
heavy use.
v3:
* Don't take the job_lock in panfrost_job_handle_irq()
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-9-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:42 +0000 (08:27 +0200)]
drm/panfrost: Expose a helper to trigger a GPU reset
Expose a helper to trigger a GPU reset so we can easily trigger reset
operations outside the job timeout handler.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-8-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:41 +0000 (08:27 +0200)]
drm/panfrost: Do the exception -> string translation using a table
Do the exception -> string translation using a table. This way we get
rid of those magic numbers and can easily add new fields if we need
to attach extra information to exception types.
v4:
* Don't expose exception type to userspace
* Merge the enum definition and the enum -> string table declaration
in the same patch
v3:
* Drop the error field
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-7-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:40 +0000 (08:27 +0200)]
drm/panfrost: Drop the pfdev argument passed to panfrost_exception_name()
Currently unused. We'll add it back if we need per-GPU definitions.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-6-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:39 +0000 (08:27 +0200)]
drm/panfrost: Get rid of the unused JS_STATUS_EVENT_ACTIVE definition
Exception types will be defined as an enum.
v4:
* Fix typo in the commit message
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-5-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:38 +0000 (08:27 +0200)]
drm/panfrost: Make ->run_job() return an ERR_PTR() when appropriate
If the fence creation fail, we can return the error pointer directly.
The core will update the fence error accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-4-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:37 +0000 (08:27 +0200)]
drm/sched: Allow using a dedicated workqueue for the timeout/fault tdr
Mali Midgard/Bifrost GPUs have 3 hardware queues but only a global GPU
reset. This leads to extra complexity when we need to synchronize timeout
works with the reset work. One solution to address that is to have an
ordered workqueue at the driver level that will be used by the different
schedulers to queue their timeout work. Thanks to the serialization
provided by the ordered workqueue we are guaranteed that timeout
handlers are executed sequentially, and can thus easily reset the GPU
from the timeout handler without extra synchronization.
v5:
* Add a new paragraph to the timedout_job() method
v3:
* New patch
v4:
* Actually use the timeout_wq to queue the timeout work
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-3-boris.brezillon@collabora.com
Boris Brezillon [Wed, 30 Jun 2021 06:27:36 +0000 (08:27 +0200)]
drm/sched: Document what the timedout_job method should do
The documentation is a bit vague and doesn't really describe what the
->timedout_job() is expected to do. Let's add a few more details.
v5:
* New patch
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-2-boris.brezillon@collabora.com
Mikel Rychliski [Thu, 24 Jun 2021 04:51:20 +0000 (00:51 -0400)]
drm/radeon: Fix NULL dereference when updating memory stats
radeon_ttm_bo_destroy() is attempting to access the resource object to
update memory counters. However, the resource object is already freed when
ttm calls this function via the destroy callback. This causes an oops when
a bo is freed:
BUG: kernel NULL pointer dereference, address:
0000000000000010
RIP: 0010:radeon_ttm_bo_destroy+0x2c/0x100 [radeon]
Call Trace:
radeon_bo_unref+0x1a/0x30 [radeon]
radeon_gem_object_free+0x33/0x50 [radeon]
drm_gem_object_release_handle+0x69/0x70 [drm]
drm_gem_handle_delete+0x62/0xa0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
drm_ioctl_kernel+0xb2/0xf0 [drm]
drm_ioctl+0x30a/0x3c0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
radeon_drm_ioctl+0x49/0x80 [radeon]
__x64_sys_ioctl+0x8e/0xd0
Avoid the issue by updating the counters in the delete_mem_notify callback
instead. Also, fix memory statistic updating in radeon_bo_move() to
identify the source type correctly. The source type needs to be saved
before the move, because the moved from object may be altered by the move.
Fixes:
bfa3357ef9ab ("drm/ttm: allocate resource object instead of embedding it v2")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624045121.15643-1-mikel@mikelr.com
Thomas Zimmermann [Fri, 25 Jun 2021 08:22:22 +0000 (10:22 +0200)]
drm/zte: Don't set struct drm_device.irq_enabled
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in zte.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-28-tzimmermann@suse.de
Thomas Zimmermann [Fri, 25 Jun 2021 08:22:21 +0000 (10:22 +0200)]
drm/xlnx: Don't set struct drm_device.irq_enabled
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in xlnx.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-27-tzimmermann@suse.de
Thomas Zimmermann [Fri, 25 Jun 2021 08:22:20 +0000 (10:22 +0200)]
drm/vmwgfx: Don't set struct drm_device.irq_enabled
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in vmxgfx. All usage of
the field within vmwgfx can safely be removed.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-26-tzimmermann@suse.de