OSDN Git Service
Ido Schimmel [Thu, 16 Mar 2017 08:08:16 +0000 (09:08 +0100)]
mlxsw: spectrum_router: Associate RIFs with correct VR
When a router interface (RIF) is created due to a netdev being enslaved
to a VRF master, then it should be associated with the appropriate
virtual router (VR) and not the default one.
If netdev is a VRF slave, lookup the VR based on the VRF's table ID.
Otherwise default to the MAIN table.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 16 Mar 2017 08:08:15 +0000 (09:08 +0100)]
net: vrf: Set slave's private flag before linking
Allow listeners of the subsequent CHANGEUPPER notification to retrieve
the VRF's table ID by calling l3mdev_fib_table() with the slave netdev.
Without this change, the netdev won't be considered an L3 slave and the
function would return 0.
This is consistent with other master device such as bridge and bond that
set the slave's private flag before linking. It also makes
do_vrf_{add,del}_slave() symmetric.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 16 Mar 2017 08:08:14 +0000 (09:08 +0100)]
ipv4: fib_rules: Dump FIB rules when registering FIB notifier
In commit
c3852ef7f2f8 ("ipv4: fib: Replay events when registering FIB
notifier") we dumped the FIB tables and replayed the events to the
passed notification block.
However, we merely sent a RULE_ADD notification in case custom rules
were in use. As explained in previous patches, this approach won't work
anymore. Instead, we should notify the caller about all the FIB rules
and let it act accordingly.
Upon registration to the FIB notification chain, replay a RULE_ADD
notification for each programmed FIB rule, custom or not. The integrity
of the dump is ensured by the mechanism introduced in the above
mentioned commit.
Prevent regressions by making sure current listeners correctly sanitize
the notified rules.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 16 Mar 2017 08:08:13 +0000 (09:08 +0100)]
ipv4: fib_rules: Add notifier info to FIB rules notifications
Whenever a FIB rule is added or removed, a notification is sent in the
FIB notification chain. However, listeners don't have a way to tell
which rule was added or removed.
This is problematic as we would like to give listeners the ability to
decide which action to execute based on the notified rule. Specifically,
offloading drivers should be able to determine if they support the
reflection of the notified FIB rule and flush their LPM tables in case
they don't.
Do that by adding a notifier info to these notifications and embed the
common FIB rule struct in it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 16 Mar 2017 08:08:12 +0000 (09:08 +0100)]
ipv4: fib_rules: Check if rule is a default rule
Currently, when non-default (custom) FIB rules are used, devices capable
of layer 3 offloading flush their tables and let the kernel do the
forwarding instead.
When these devices' drivers are loaded they register to the FIB
notification chain, which lets them know about the existence of any
custom FIB rules. This is done by sending a RULE_ADD notification based
on the value of 'net->ipv4.fib_has_custom_rules'.
This approach is problematic when VRF offload is taken into account, as
upon the creation of the first VRF netdev, a l3mdev rule is programmed
to direct skbs to the VRF's table.
Instead of merely reading the above value and sending a single RULE_ADD
notification, we should iterate over all the FIB rules and send a
detailed notification for each, thereby allowing offloading drivers to
sanitize the rules they don't support and potentially flush their
tables.
While l3mdev rules are uniquely marked, the default rules are not.
Therefore, when they are being notified they might invoke offloading
drivers to unnecessarily flush their tables.
Solve this by adding an helper to check if a FIB rule is a default rule.
Namely, its selector should match all packets and its action should
point to the local, main or default tables.
As noted by David Ahern, uniquely marking the default rules is
insufficient. When using VRFs, it's common to avoid false hits by moving
the rule for the local table to just before the main table:
Default configuration:
$ ip rule show
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
Common configuration with VRFs:
$ ip rule show
1000: from all lookup [l3mdev-table]
32765: from all lookup local
32766: from all lookup main
32767: from all lookup default
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hayeswang [Thu, 16 Mar 2017 06:32:22 +0000 (14:32 +0800)]
r8152: simply the arguments
Replace &tp->napi with napi and tp->netdev with netdev.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 16 Mar 2017 04:52:53 +0000 (21:52 -0700)]
Merge branch 'xgene-bug-fixes'
Iyappan Subramanian says:
====================
drivers: net: xgene: Bug fixes and errata workarounds
This patch set addresses bug fixes and errata workarounds.
====================
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Wed, 15 Mar 2017 20:27:21 +0000 (13:27 -0700)]
MAINTAINERS: Update X-Gene SoC ethernet maintainer
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Wed, 15 Mar 2017 20:27:20 +0000 (13:27 -0700)]
drivers: net: xgene: Add workaround for errata 10GE_8/ENET_11
This patch implements workaround for errata 10GE_8 and ENET_11:
"HW reports length error for valid 64 byte frames with len <46 bytes"
by recovering them from error.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Toan Le <toanle@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quan Nguyen [Wed, 15 Mar 2017 20:27:19 +0000 (13:27 -0700)]
drivers: net: xgene: Add workaround for errata 10GE_1
This patch implements workaround for errata 10GE_1:
10Gb Ethernet port FIFO threshold default values are incorrect.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Toan Le <toanle@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Tested-by: Fushen Chen <fchen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iyappan Subramanian [Wed, 15 Mar 2017 20:27:18 +0000 (13:27 -0700)]
drivers: net: xgene: Fix Rx checksum validation logic
This patch fixes Rx checksum validation logic and
adds NETIF_F_RXCSUM flag.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quan Nguyen [Wed, 15 Mar 2017 20:27:17 +0000 (13:27 -0700)]
drivers: net: xgene: Fix wrong logical operation
This patch fixes the wrong logical OR operation by changing it to
bit-wise OR operation.
Fixes:
3bb502f83080 ("drivers: net: xgene: fix statistics counters race condition")
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quan Nguyen [Wed, 15 Mar 2017 20:27:16 +0000 (13:27 -0700)]
drivers: net: xgene: Fix hardware checksum setting
This patch fixes the hardware checksum settings by properly program
the classifier. Otherwise, packet may be received with checksum error
on X-Gene1 SoC.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quan Nguyen [Wed, 15 Mar 2017 20:27:15 +0000 (13:27 -0700)]
drivers: net: phy: xgene: Fix mdio write
This patches fixes a typo in the argument to xgene_enet_wr_mdio_csr().
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Mar 2017 22:34:14 +0000 (15:34 -0700)]
Merge branch 'dsa-check-out-of-range-ageing-time'
Vivien Didelot says:
====================
net: dsa: check out-of-range ageing time
The ageing time limits supported by DSA drivers vary depending on the
switch model. If a driver returns -ERANGE for out-of-range values, the
switchdev commit phase will fail with the following stacktrace:
# brctl setageing br0 4
[ 8530.082179] WARNING: CPU: 0 PID: 910 at net/switchdev/switchdev.c:291 switchdev_port_attr_set_now+0xbc/0xc0
[ 8530.090679] br0: Commit of attribute (id=5) failed.
[ 8530.094256] Modules linked in:
[ 8530.096032] CPU: 0 PID: 910 Comm: kworker/0:4 Tainted: G W 4.10.0 #361
[ 8530.102412] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
[ 8530.107571] Workqueue: events switchdev_deferred_process_work
[ 8530.112039] Backtrace:
[ 8530.113224] [<
8010ca34>] (dump_backtrace) from [<
8010cd3c>] (show_stack+0x20/0x24)
[ 8530.119521] r6:
00000000 r5:
80834da0 r4:
80ca7e48 r3:
8120ca3c
[ 8530.123908] [<
8010cd1c>] (show_stack) from [<
8037ad40>] (dump_stack+0x24/0x28)
[ 8530.129873] [<
8037ad1c>] (dump_stack) from [<
80118de4>] (__warn+0xf4/0x10c)
[ 8530.135545] [<
80118cf0>] (__warn) from [<
80118e44>] (warn_slowpath_fmt+0x48/0x50)
[ 8530.141760] r9:
00000000 r8:
81252bec r7:
80f19d90 r6:
9dc3c000 r5:
80ca7e7c r4:
80834de8
[ 8530.148235] [<
80118e00>] (warn_slowpath_fmt) from [<
80670b20>] (switchdev_port_attr_set_now+0xbc/0xc0)
[ 8530.156240] r3:
9dc3c000 r2:
80834de8
[ 8530.158539] r4:
ffffffde
[ 8530.159788] [<
80670a64>] (switchdev_port_attr_set_now) from [<
80670b44>] (switchdev_port_attr_set_deferred+0x20/0x6c)
[ 8530.169118] r7:
806705a8 r6:
9dc3c000 r5:
80f19d90 r4:
80f19d80
[ 8530.173500] [<
80670b24>] (switchdev_port_attr_set_deferred) from [<
80670580>] (switchdev_deferred_process+0x50/0xe8)
[ 8530.182742] r6:
80ca6000 r5:
81252bec r4:
80f19d80 r3:
80670b24
[ 8530.187115] [<
80670530>] (switchdev_deferred_process) from [<
80670930>] (switchdev_deferred_process_work+0x1c/0x24)
[ 8530.196277] r8:
00000000 r7:
9ffdc100 r6:
8120ad6c r5:
9ddefc00 r4:
81252bf4 r3:
9de343c0
[ 8530.202756] [<
80670914>] (switchdev_deferred_process_work) from [<
8012f770>] (process_one_work+0x120/0x3b0)
[ 8530.211231] [<
8012f650>] (process_one_work) from [<
8012fa70>] (worker_thread+0x70/0x534)
[ 8530.218046] r10:
9ddefc00 r9:
8120ad6c r8:
80ca6038 r7:
8120ad80 r6:
81211f80 r5:
9ddefc18
[ 8530.224579] r4:
8120ad6c
[ 8530.225830] [<
8012fa00>] (worker_thread) from [<
80135640>] (kthread+0x114/0x144)
[ 8530.231955] r10:
9f4e9e94 r9:
9de1fe58 r8:
8012fa00 r7:
9ddefc00 r6:
9de1fdc0 r5:
00000000
[ 8530.238497] r4:
9de1fe40
[ 8530.239750] [<
8013552c>] (kthread) from [<
80108cd8>] (ret_from_fork+0x14/0x3c)
[ 8530.245679] r10:
00000000 r9:
00000000 r8:
00000000 r7:
00000000 r6:
00000000 r5:
8013552c
[ 8530.252234] r4:
9de1fdc0 r3:
80ca6000
[ 8530.254512] ---[ end trace
87475cc71b80ef73 ]---
[ 8530.257852] br0: failed (err=-34) to set attribute (id=5)
This patchset fixes this by adding ageing_time_min and ageing_time_max
fields to the dsa_switch structure, which can optionally be set by a DSA
driver.
If provided, the DSA core will check for out-of-range values in the
SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME prepare phase and return -ERANGE
accordingly.
Finally set these limits in the mv88e6xxx driver.
====================
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Wed, 15 Mar 2017 19:53:50 +0000 (15:53 -0400)]
net: dsa: mv88e6xxx: specify ageing time limits
Now that DSA has ageing time limits, specify them when registering a
switch so that out-of-range values are handled correctly by the core.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reported-by: Jason Cobham <jcobham@questertangent.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Wed, 15 Mar 2017 19:53:49 +0000 (15:53 -0400)]
net: dsa: check out-of-range ageing time value
If a DSA switch driver cannot program an ageing time value due to it
being out-of-range, switchdev will raise a stack trace before failing.
To fix this, add ageing_time_min and ageing_time_max members to the
dsa_switch in order for the switch drivers to optionally specify their
supported ageing time limits.
The DSA core will now check for provided ageing time limits and return
-ERANGE from the switchdev prepare phase if the value is out-of-range.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Wed, 15 Mar 2017 19:53:48 +0000 (15:53 -0400)]
net: dsa: dsa_fastest_ageing_time return unsigned
The ageing time is defined as unsigned int, so make
dsa_fastest_ageing_time return an unsigned int instead of int.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Mar 2017 22:20:28 +0000 (15:20 -0700)]
Merge branch 'mqprio-offload-more-info'
Alexander Duyck says:
====================
Add support for passing more information in mqprio offload
This patch series lays the groundwork for future work to allow us to make
full use of the mqprio options when offloading them to hardware.
Currently when we specify the hardware offload for mqprio the queue
configuration is completely ignored and the hardware is only notified of
the total number of traffic classes. The problem is this leads to multiple
issues, one specific issue being you can pass the queue configuration you
want and it is totally ignored by the hardware.
What I am planning to do is add support for "hw" values in the
configuration greater than 1. So for example we might have one mode of
mqprio offload that uses 1 and only offloads the TC counts like we
currently do. Then we might look at adding an option 2 which would factor
in the TCs and the queue count information. This way we can select between
the type of offload we actually want and existing drivers that don't
support this can just fall back to their legacy configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amritha Nambiar [Wed, 15 Mar 2017 17:39:25 +0000 (10:39 -0700)]
mqprio: Modify mqprio to pass user parameters via ndo_setup_tc.
The configurable priority to traffic class mapping and the user specified
queue ranges are used to configure the traffic class, overriding the
hardware defaults when the 'hw' option is set to 0. However, when the 'hw'
option is non-zero, the hardware QOS defaults are used.
This patch makes it so that we can pass the data the user provided to
ndo_setup_tc. This allows us to pull in the queue configuration if the
user requested it as well as any additional hardware offload type
requested by using a value other than 1 for the hw value.
Finally it also provides a means for the device driver to return the level
supported for the offload type via the qopt->hw value. Previously we were
just always assuming the value to be 1, in the future values beyond just 1
may be supported.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 15 Mar 2017 17:39:18 +0000 (10:39 -0700)]
mqprio: Change handling of hw u8 to allow for multiple hardware offload modes
This patch is meant to allow for support of multiple hardware offload type
for a single device. There is currently no bounds checking for the hw
member of the mqprio_qopt structure. This results in us being able to pass
values from 1 to 255 with all being treated the same. On retreiving the
value it is returned as 1 for anything 1 or greater being set.
With this change we are currently adding limited bounds checking by
defining an enum and using those values to limit the reported hardware
offloads.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 15 Mar 2017 15:31:58 +0000 (15:31 +0000)]
netxen_nic: remove redundant check if retries is zero
At the end of the timeout loop, retries will always be zero so
the check for zero is redundant so remove it. Also replace
printk with pr_err as recommended by checkpatch.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Mar 2017 21:44:33 +0000 (14:44 -0700)]
Merge branch 'stmmac-dma-ops-multiqueue'
Joao Pinto says:
====================
net: stmmac: prepare dma operations for multiple queues
As agreed with David Miller, this patch-set is the second of 3 to enable
multiple queues in stmmac.
This second one concentrates on dma operations adding functionalities as:
a) DMA Operation Mode configuration per channel and done in the multiple
queues configuration function
b) DMA IRQ enable and Disable by channel
c) DMA start and stop by channel
d) RX and TX ring length configuration by channel
e) RX and TX set tail pointer by channel
f) DMA Channel initialization broke into Channel comon, RX and TX
initialization
g) TSO being configured for all available channels
h) DMA interrupt treatment by channel
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:55 +0000 (11:04 +0000)]
net: stmmac: stmmac interrupt treatment prepared for multiple queues
This patch prepares the main ISR for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:54 +0000 (11:04 +0000)]
net: stmmac: tso init prepared for multiple queues
This patch configures TSO for all available tx queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:53 +0000 (11:04 +0000)]
net: stmmac: dma channel init prepared for multiple queues
This patch prepares the DMA initialization process for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:52 +0000 (11:04 +0000)]
net: stmmac: prepare rx/tx set tail function for multiple queues
This patch prepares RX and TX set tail functions for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:51 +0000 (11:04 +0000)]
net: stmmac: rx and tx ring length prepared for multiple queues
This patch prepares tx and rx ring length configuration for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:50 +0000 (11:04 +0000)]
net: stmmac: rx watchdog config prepared for multiple queues
This patch adds rx watchdog configuration for all queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:49 +0000 (11:04 +0000)]
net: stmmac: prepare dma interrupt treatment for multiple queues
This patch prepares DMA interrupts treatment for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:48 +0000 (11:04 +0000)]
net: stmmac: prepare stmmac_tx_err for multiple queues
This patch prepares stmmac_err for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:47 +0000 (11:04 +0000)]
net: stmmac: rx/tx dma start/stop prepared for multiple queues
This patch prepares the RX/TX DMA stop/start process for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:46 +0000 (11:04 +0000)]
net: stmmac: enable/disable dma irq prepared for multiple queues
This patch prepares the DMA IRQ enable/disable process for multiple queues.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joao Pinto [Wed, 15 Mar 2017 11:04:45 +0000 (11:04 +0000)]
net: stmmac: prepare dma op mode config for multiple queues
This patch prepares DMA Operation Mode configuration for multiple queues.
The work consisted on breaking the DMA operation Mode configuration function
into RX and TX scope and adapting its mechanism in stmmac_main.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Mar 2017 20:00:28 +0000 (13:00 -0700)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-03-15
This series contains updates to i40e and i40evf only.
Aaron fixes an issue on x710 devices where simultaneous read accesses
were interfering with each other, so make sure all devices acquire the
NVM lock before reads on all devices.
Shannon adds Wake On LAN support feature for x722 devices and cleaned
up the opcodes so that they are in numerical order.
Mitch adds a client interface to the VF driver, in preparation for the
upcoming RDMA-capable hardware (and client driver). Cleaned up the
client interface in the PF driver, since it was originally over
engineered to handle multiple clients on multiple netdevs, but that
did not happen and now there will be one client per driver, so apply
the "KISS" (Keep It Simple & Stupid) to the i40e client interface.
Bumped the number of MAC filters an untrusted VF can create.
Jake fixes an issue where a recent refactor of queue pairs accidentally
added all remaining vecotrs to the num_lan_msix which can adversely
affect performance.
Lihong fixes an ethtool issue with x722 devices where "-e" will error
out since its EEPROM has a scope limit at offset 0x5B9FFF, so set the
EEPROM length to the scope limit. Also fixed an issue where RSS
offloading only worked on PF0.
Filip cleans up and clarifies code comment so there is no confusion
about MAC/VLAN filter initialization routine.
Alex adds support for DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING,
which improves performance on architectures that implement either one.
Harshitha cleans up confusion on flags disabled due to hardware limitation
versus featured disabled by the user, so rename auto_disable_flags to
hw_disabled_flags to avoid the confusion.
v2: Merged patch #1 and #4 in first version to make patch #3 in this
series based on feedback from David Miller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 15 Mar 2017 18:59:10 +0000 (11:59 -0700)]
Merge git://git./linux/kernel/git/davem/net
Conflicts:
drivers/net/ethernet/broadcom/genet/bcmgenet.c
net/core/sock.c
Conflicts were overlapping changes in bcmgenet and the
lockdep handling of sockets.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 15 Mar 2017 17:44:19 +0000 (10:44 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a rather large set of fixes. The bulk are for lpfc correcting
a lot of issues in the new NVME driver code which just went in in the
merge window.
The others are:
- fix a hang in the vmware paravirt driver caused by incorrect
handling of the new MSI vector allocation
- long standing bug in storvsc, which recent block changes turned
from being a harmless annoyance into a hang
- yet more fallout (in mpt3sas) from the changes to device blocking
The remainder are small fixes and updates"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits)
scsi: lpfc: Add shutdown method for kexec
scsi: storvsc: Workaround for virtual DVD SCSI version
scsi: lpfc: revise version number to 11.2.0.10
scsi: lpfc: code cleanups in NVME initiator discovery
scsi: lpfc: code cleanups in NVME initiator base
scsi: lpfc: correct rdp diag portnames
scsi: lpfc: remove dead sli3 nvme code
scsi: lpfc: correct double print
scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT
scsi: lpfc: Rework lpfc Kconfig for NVME options
scsi: lpfc: add transport eh_timed_out reference
scsi: lpfc: Fix eh_deadline setting for sli3 adapters.
scsi: lpfc: add NVME exchange aborts
scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport
scsi: lpfc: Fix IO submission if WQ is full
scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem
scsi: lpfc: Fix RCTL value on NVME LS request and response
scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
scsi: lpfc: fix missing spin_unlock on sql_list_lock
scsi: lpfc: don't dereference dma_buf->iocbq before null check
...
Linus Torvalds [Wed, 15 Mar 2017 16:33:15 +0000 (09:33 -0700)]
Merge tag 'gfs2-4.11-rc3.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Bob Peterson:
"This is an emergency patch for 4.11-rc3
The GFS2 developers uncovered a really nasty problem that can lead to
random corruption and kernel panic, much like the last one. Andreas
Gruenbacher wrote a simple one-line patch to fix the problem."
* tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Avoid alignment hole in struct lm_lockname
Linus Torvalds [Wed, 15 Mar 2017 16:26:04 +0000 (09:26 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- self-test failure of crc32c on powerpc
- regressions of ecb(aes) when used with xts/lrw in s5p-sss
- a number of bugs in the omap RNG driver
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s5p-sss - Fix spinlock recursion on LRW(AES)
hwrng: omap - Do not access INTMASK_REG on EIP76
hwrng: omap - use devm_clk_get() instead of of_clk_get()
hwrng: omap - write registers after enabling the clock
crypto: s5p-sss - Fix completing crypto request in IRQ handler
crypto: powerpc - Fix initialisation of crc32c context
Andreas Gruenbacher [Mon, 6 Mar 2017 17:58:42 +0000 (12:58 -0500)]
gfs2: Avoid alignment hole in struct lm_lockname
Commit
88ffbf3e03 switches to using rhashtables for glocks, hashing over
the entire struct lm_lockname instead of its individual fields. On some
architectures, struct lm_lockname contains a hole of uninitialized
memory due to alignment rules, which now leads to incorrect hash values.
Get rid of that hole.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
CC: <stable@vger.kernel.org> #v4.3+
Harshitha Ramamurthy [Fri, 3 Feb 2017 18:57:42 +0000 (10:57 -0800)]
i40e: rename auto_disable_flags to hw_disabled_flags
A previous commit introduced a field that tracks the features
that are disabled due to HW resource limitations as opposed
to the featured disabled by the user. This patch changes the
name of the field to make it more readable since it might get
confusing when looking at code containing both the flags
field and the auto_disable_features field together.
Change-ID: Idcc9888659698f6fe3ccff17c8c3f09b5026f708
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Bimmy Pujari [Mon, 30 Jan 2017 20:29:37 +0000 (12:29 -0800)]
i40e/i40evf: Change version from 1.6.27 to 2.1.7
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Mon, 30 Jan 2017 20:29:36 +0000 (12:29 -0800)]
i40e: Allow untrusted VFs to have more filters
Our original filter limit of 8 was based on behavior that we saw from
Linux VMs. Now we're running Other Operating Systems under KVM and we
see that they commonly use more MAC filters. Since it seems weird to
require people to enable trusted VFs just to boot their OS, bump the
number of filters allowed by default.
Change-ID: I76b2dcb2ad6017e39231ad3096c3fb6f065eef5e
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Mon, 30 Jan 2017 20:29:35 +0000 (12:29 -0800)]
i40e/i40evf: Add support for mapping pages with DMA attributes
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC and
DMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we
are able to see performance improvements on architectures that implement
either one due to the fact that page mapping and unmapping only has to
sync what is actually being used instead of the entire buffer. In addition
by enabling the weak ordering attribute enables a performance improvement
for architectures that can associate a memory ordering with a DMA buffer
such as Sparc.
Change-ID: If176824e8231c5b24b8a5d55b339a6026738fc75
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Filip Sadowski [Mon, 30 Jan 2017 20:29:34 +0000 (12:29 -0800)]
i40e: Clarify steps in MAC/VLAN filters initialization routine
This patch clarifies the reason for removal of automatically
firmware-generated filter and explicit addition of filter which
accepts frames with any VLAN id.
Change-ID: Iabf180b6d61c4d8a36d3bcf8457c377a6f2aca0e
Signed-off-by: Filip Sadowski <filip.sadowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Lihong Yang [Mon, 30 Jan 2017 20:29:33 +0000 (12:29 -0800)]
i40e: fix RSS queues only operating on PF0
This patch fixes the issue that RSS offloading only works on PF0 by
using the direct register writing of the hash keys for the VFs instead
of using the admin queue command to do so.
Change-ID: Ia02cda7dbaa23def342e8786097a2c03db6f580b
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Lihong Yang [Mon, 30 Jan 2017 20:29:32 +0000 (12:29 -0800)]
i40e: fix ethtool to get EEPROM data from X722 interface
Currently ethtool -e will error out with a X722 interface
as its EEPROM has a scope limit at offset 0x5B9FFF.
This patch fixes the issue by setting the EEPROM length to
the scope limit to avoid NVM read failure beyond that.
Change-ID: I0b7d4dd6c7f2a57cace438af5dffa0f44c229372
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Tue, 24 Jan 2017 18:24:01 +0000 (10:24 -0800)]
i40e: don't add more vectors to num_lan_msix than number of CPUs
This is a solution to avoid adding too many queues to num_lan_msix.
A recent refactor of queue pairs accidentally added all remaining
vectors to the num_lan_msix which can have adverse performance issues,
due to enabling more queues than the number of CPU cores.
This patch removes the old calculation, and replaces it with a simple
algorithm.
1) add queue pairs up to num_online_cpus(), but capped at half of total
vectors
2) then add alternative features such as flow directory and similar
3) finally, add the remaining vectors back to queue pairs, but capped
such that the total number of queue pairs does not exceed
num_online_cpus().
Change-ID: I668abf67d5011a1248866daba8885f4ff00cb8d9
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 24 Jan 2017 18:24:00 +0000 (10:24 -0800)]
i40e: KISS the client interface
(KISS is Keep It Simple, Stupid. Or is it?)
The client interface vastly overengineered for what it needs to do.
It was originally designed to support multiple clients on multiple
netdevs, possibly even with multiple drivers. None of this happened,
and now we know that there will only ever be one client for i40e
(i40iw) and one for i40evf (i40iwvf). So, time for some KISS. Since
i40e and i40evf are a Dynasty, we'll simplify this one to match the
VF interface.
First, be a Destroyer and remove all of the lists and locks required
to support multiple clients. Keep one static around to keep track of
one client, and track the client instances for each netdev in the
driver's pf (or adapter) struct. Now it's Almost Human.
Since we already know the client type is iWarp, get rid of any checks
for this. Same for VSI type - it's always going to be the same type,
so it's just a Parasite.
While we're at it, fix up some comments. This makes the function
headers actually match the functions.
These changes reduce code complexity, simplify maintenance,
squash some lurking timing bugs, and allow us to Rock and Roll All
Nite.
Change-ID: I1ea79948ad73b8685272451440a34507f9a9012e
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 24 Jan 2017 18:23:59 +0000 (10:23 -0800)]
i40evf: add client interface
In preparation for upcoming RDMA-capable hardware, add a client
interface to the VF driver. This is a slightly-simplified version
of the PF client interface, with the names changed to protect the
innocent.
Due to the nature of the VF<->PF interactions, the client interface
sometimes needs to call back into itself to pass messages. Because
of this, we can't use the coarse-grained locking like the PF's
client interface uses. Instead, we handle all client interactions
in a separate thread so the watchdog can still run and process
virtual channel messages.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Wed, 15 Mar 2017 04:31:23 +0000 (21:31 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
from Steffen Klassert.
2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
Alexei Starovoitov.
3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
Michal Schmidt.
4) We can get a divide by zero when TCP socket are morphed into
listening state, fix from Eric Dumazet.
5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
skb_complete_tx_timestamp(). From Eric Dumazet.
6) Use after free in dccp_feat_activate_values(), also from Eric
Dumazet.
7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
Jarod Wilson.
8) Fix use after free in vrf_xmit(), from David Ahern.
9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
Alexey Kodanev.
10) Properly check napi_complete_done() return value in order to decide
whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
Lendacky.
11) Fix double free of hwmon device in marvell phy driver, from Andrew
Lunn.
12) Don't crash on malformed netlink attributes in act_connmark, from
Etienne Noss.
13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
from Sabrina Dubroca.
14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
Florian Westphal.
15) Fix routing redirect races in dccp and tcp, basically the ICMP
handler can't modify the socket's cached route in it's locked by the
user at this moment. From Jon Maxwell.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
qed: Enable iSCSI Out-of-Order
qed: Correct out-of-bound access in OOO history
qed: Fix interrupt flags on Rx LL2
qed: Free previous connections when releasing iSCSI
qed: Fix mapping leak on LL2 rx flow
qed: Prevent creation of too-big u32-chains
qed: Align CIDs according to DORQ requirement
mlxsw: reg: Fix SPVMLR max record count
mlxsw: reg: Fix SPVM max record count
net: Resend IGMP memberships upon peer notification.
dccp: fix memory leak during tear-down of unsuccessful connection request
tun: fix premature POLLOUT notification on tun devices
dccp/tcp: fix routing redirect race
ucc/hdlc: fix two little issue
vxlan: fix ovs support
net: use net->count to check whether a netns is alive or not
bridge: drop netfilter fake rtable unconditionally
ipv6: avoid write to a possibly cloned skb
net: wimax/i2400m: fix NULL-deref at probe
isdn/gigaset: fix NULL-deref at probe
...
Shannon Nelson [Tue, 24 Jan 2017 18:23:58 +0000 (10:23 -0800)]
i40e: fix up recent proxy and wol bits for X722_SUPPORT
Some opcodes added & reordered to be in numerical order with the
rest of the opcodes.
This patch adds admin queue structs to support Wake on LAN feature
for X722.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Aaron Salter [Fri, 2 Dec 2016 20:33:02 +0000 (12:33 -0800)]
i40e: Acquire NVM lock before reads on all devices
Acquire NVM lock before reads on all devices. Previously, locks were
only used for X722 and later. Fixes an issue where simultaneous X710
NVM accesses were interfering with each other.
Change-ID: If570bb7acf958cef58725ec2a2011cead6f80638
Signed-off-by: Aaron Salter <aaron.k.salter@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Tue, 14 Mar 2017 22:11:19 +0000 (15:11 -0700)]
Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Three cgroup fixes. Nothing critical:
- the pids controller could trigger suspicious RCU warning
spuriously. Fixed.
- in the debug controller, %p -> %pK to protect kernel pointer
from getting exposed.
- documentation formatting fix"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroups: censor kernel pointer in debug files
cgroup/pids: remove spurious suspicious RCU usage warning
cgroup: Fix indenting in PID controller documentation
Linus Torvalds [Tue, 14 Mar 2017 22:00:43 +0000 (15:00 -0700)]
Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Three libata fixes:
- fix for a circular reference bug in sysfs code which prevented
pata_legacy devices from being released after probe failure, which
in turn prevented devres from releasing the associated resources.
- drop spurious WARN in the command issue path which can be triggered
by a legitimate passthrough command.
- an ahci_qoriq specific fix"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: qoriq: correct the sata ecc setting error
libata: drop WARN from protocol error in ata_sff_qc_issue()
libata: transport: Remove circular dependency at free time
Linus Torvalds [Tue, 14 Mar 2017 21:52:08 +0000 (14:52 -0700)]
Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"If a delayed work is queued with NULL @wq, workqueue code explodes
after the timer expires at which point it's difficult to tell who the
culprit was.
This actually happened and the offender was net/smc this time.
Add an explicit sanity check for it in the queueing path"
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
Linus Torvalds [Tue, 14 Mar 2017 21:48:50 +0000 (14:48 -0700)]
Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/percpu
Pull percpu fixes from Tejun Heo:
- the allocation path was updating pcpu_nr_empty_pop_pages without the
required locking which can lead to incorrect handling of empty chunks
(e.g. keeping too many around), which is buggy but shouldn't lead to
critical failures. Fixed by adding the locking
- a trivial patch to drop an unused param from pcpu_get_pages()
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: remove unused chunk_alloc parameter from pcpu_get_pages()
percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
Mintz, Yuval [Tue, 14 Mar 2017 14:23:54 +0000 (16:23 +0200)]
qed*: Add support for QL41xxx adapters
This adds the necessary infrastructure changes for initializing
and working with the new series of QL41xxx adapaters.
It also adds 2 new PCI device-IDs to qede:
- 0x8070 for QL41xxx PFs
- 0x8090 for VFs spawning from QL41xxx PFs
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Mar 2017 18:37:06 +0000 (11:37 -0700)]
Merge branch 'qed-fixes'
Yuval Mintz says:
====================
qed: Fixes series
This address several different issues in qed.
The more significant portions:
Patch #1 would cause timeout when qedr utilizes the highest
CIDs availble for it [or when future qede adapters would utilize
queues in some constellations].
Patch #4 fixes a leak of mapped addresses; When iommu is enabled,
offloaded storage protocols might eventually run out of resources
and fail to map additional buffers.
Patches #6,#7 were missing in the initial iSCSI infrastructure
submissions, and would hamper qedi's stability when it reaches
out-of-order scenarios.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 14 Mar 2017 13:26:04 +0000 (15:26 +0200)]
qed: Enable iSCSI Out-of-Order
Missing in the initial submission, qed fails to propagate qedi's
request to enable OOO to firmware.
Fixes:
fc831825f99e ("qed: Add support for hardware offloaded iSCSI")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 14 Mar 2017 13:26:03 +0000 (15:26 +0200)]
qed: Correct out-of-bound access in OOO history
Need to set the number of entries in database, otherwise the logic
would quickly surpass the array.
Fixes:
1d6cff4fca43 ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ram Amrani [Tue, 14 Mar 2017 13:26:02 +0000 (15:26 +0200)]
qed: Fix interrupt flags on Rx LL2
Before iterating over the the LL2 Rx ring, the ring's
spinlock is taken via spin_lock_irqsave().
The actual processing of the packet [including handling
by the protocol driver] is done without said lock,
so qed releases the spinlock and re-claims it afterwards.
Problem is that the final spin_lock_irqrestore() at the end
of the iteration uses the original flags saved from the
initial irqsave() instead of the flags from the most recent
irqsave(). So it's possible that the interrupt status would
be incorrect at the end of the processing.
Fixes:
0a7fb11c23c0 ("qed: Add Light L2 support");
CC: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 14 Mar 2017 13:26:01 +0000 (15:26 +0200)]
qed: Free previous connections when releasing iSCSI
Fixes:
fc831825f99e ("qed: Add support for hardware offloaded iSCSI")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Tue, 14 Mar 2017 13:26:00 +0000 (15:26 +0200)]
qed: Fix mapping leak on LL2 rx flow
When receiving an Rx LL2 packet, qed fails to unmap the previous buffer.
Fixes:
0a7fb11c23c0 ("qed: Add Light L2 support");
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tomer Tayar [Tue, 14 Mar 2017 13:25:59 +0000 (15:25 +0200)]
qed: Prevent creation of too-big u32-chains
Current Logic would allow the creation of a chain with U32_MAX + 1
elements, when the actual maximum supported by the driver infrastructure
is U32_MAX.
Fixes:
a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ram Amrani [Tue, 14 Mar 2017 13:25:58 +0000 (15:25 +0200)]
qed: Align CIDs according to DORQ requirement
The Doorbell HW block can be configured at a granularity
of 16 x CIDs, so we need to make sure that the actual number
of CIDs configured would be a multiplication of 16.
Today, when RoCE is enabled - given that the number is unaligned,
doorbelling the higher CIDs would fail to reach the firmware and
would eventually timeout.
Fixes:
dbb799c39717 ("qed: Initialize hardware for new protocols")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Mar 2017 18:35:11 +0000 (11:35 -0700)]
Merge branch 'mlxsw-small-fixes'
Jiri Pirko says:
====================
mlxsw: Couple of fixes
Couple or small fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 14 Mar 2017 13:00:01 +0000 (14:00 +0100)]
mlxsw: reg: Fix SPVMLR max record count
The num_rec field is 8 bit, so the maximal count number is 255.
This fixes vlans learning not being enabled for wider ranges than 255.
Fixes:
a4feea74cd7a ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Tue, 14 Mar 2017 13:00:00 +0000 (14:00 +0100)]
mlxsw: reg: Fix SPVM max record count
The num_rec field is 8 bit, so the maximal count number is 255. This
fixes vlans not being enabled for wider ranges than 255.
Fixes:
b2e345f9a454 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Tue, 14 Mar 2017 12:58:08 +0000 (08:58 -0400)]
net: Resend IGMP memberships upon peer notification.
When we notify peers of potential changes, it's also good to update
IGMP memberships. For example, during VM migration, updating IGMP
memberships will redirect existing multicast streams to the VM at the
new location.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Tue, 14 Mar 2017 06:04:48 +0000 (23:04 -0700)]
lwtunnel: remove unused but set variable
silences the below warning:
net/core/lwtunnel.c: In function ‘lwtunnel_valid_encap_type_attr’:
net/core/lwtunnel.c:165:17: warning: variable ‘nla’ set but not used
[-Wunused-but-set-variable]
Fixes:
9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Mar 2017 06:20:06 +0000 (23:20 -0700)]
Merge branch 'rds-ib-trivial-patches'
Zhu Yanjun says:
====================
rds: ib: trivial patches
v2 -> v3
remove err from messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Mon, 13 Mar 2017 05:43:48 +0000 (01:43 -0400)]
rds: ib: unmap the scatter/gather list when error
When some errors occur, the scatter/gather list mapped to DMA addresses
should be handled.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Mon, 13 Mar 2017 05:43:47 +0000 (01:43 -0400)]
rds: ib: add the static type to the function
The function rds_ib_map_fmr is used only in the ib_fmr.c
file. As such, the static type is added to limit it in this file.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Mon, 13 Mar 2017 05:43:46 +0000 (01:43 -0400)]
rds: ib: remove redundant ib_dealloc_fmr
The function ib_dealloc_fmr will never be called. As such, it should
be removed.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhu Yanjun [Mon, 13 Mar 2017 05:43:45 +0000 (01:43 -0400)]
rds: ib: drop unnecessary rdma_reject
When rdma_accept fails, rdma_reject is called in it. As such, it is
not necessary to execute rdma_reject again.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Sun, 12 Mar 2017 23:01:30 +0000 (00:01 +0100)]
dccp: fix memory leak during tear-down of unsuccessful connection request
This patch fixes a memory leak, which happens if the connection request
is not fulfilled between parsing the DCCP options and handling the SYN
(because e.g. the backlog is full), because we forgot to free the
list of ack vectors.
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Sun, 12 Mar 2017 23:00:26 +0000 (00:00 +0100)]
tun: fix premature POLLOUT notification on tun devices
aszlig observed failing ssh tunnels (-w) during initialization since
commit
cc9da6cc4f56e0 ("ipv6: addrconf: use stable address generator for
ARPHRD_NONE"). We already had reports that the mentioned commit breaks
Juniper VPN connections. I can't clearly say that the Juniper VPN client
has the same problem, but it is worth a try to hint to this patch.
Because of the early generation of link local addresses, the kernel now
can start asking for routers on the local subnet much earlier than usual.
Those router solicitation packets arrive inside the ssh channels and
should be transmitted to the tun fd before the configuration scripts
might have upped the interface and made it ready for transmission.
ssh polls on the interface and receives back a POLL_OUT. It tries to send
the earily router solicitation packet to the tun interface. Unfortunately
it hasn't been up'ed yet by config scripts, thus failing with -EIO. ssh
doesn't retry again and considers the tun interface broken forever.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121131
Fixes:
cc9da6cc4f56 ("ipv6: addrconf: use stable address generator for ARPHRD_NONE")
Cc: Bjørn Mork <bjorn@mork.no>
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Reported-by: Jonas Lippuner <jonas@lippuner.ca>
Cc: Jonas Lippuner <jonas@lippuner.ca>
Reported-by: aszlig <aszlig@redmoonstudios.org>
Cc: aszlig <aszlig@redmoonstudios.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maxwell [Fri, 10 Mar 2017 05:40:33 +0000 (16:40 +1100)]
dccp/tcp: fix routing redirect race
As Eric Dumazet pointed out this also needs to be fixed in IPv6.
v2: Contains the IPv6 tcp/Ipv6 dccp patches as well.
We have seen a few incidents lately where a dst_enty has been freed
with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that
dst_entry. If the conditions/timings are right a crash then ensues when the
freed dst_entry is referenced later on. A Common crashing back trace is:
#8 [] page_fault at
ffffffff8163e648
[exception RIP: __tcp_ack_snd_check+74]
.
.
#9 [] tcp_rcv_established at
ffffffff81580b64
#10 [] tcp_v4_do_rcv at
ffffffff8158b54a
#11 [] tcp_v4_rcv at
ffffffff8158cd02
#12 [] ip_local_deliver_finish at
ffffffff815668f4
#13 [] ip_local_deliver at
ffffffff81566bd9
#14 [] ip_rcv_finish at
ffffffff8156656d
#15 [] ip_rcv at
ffffffff81566f06
#16 [] __netif_receive_skb_core at
ffffffff8152b3a2
#17 [] __netif_receive_skb at
ffffffff8152b608
#18 [] netif_receive_skb at
ffffffff8152b690
#19 [] vmxnet3_rq_rx_complete at
ffffffffa015eeaf [vmxnet3]
#20 [] vmxnet3_poll_rx_only at
ffffffffa015f32a [vmxnet3]
#21 [] net_rx_action at
ffffffff8152bac2
#22 [] __do_softirq at
ffffffff81084b4f
#23 [] call_softirq at
ffffffff8164845c
#24 [] do_softirq at
ffffffff81016fc5
#25 [] irq_exit at
ffffffff81084ee5
#26 [] do_IRQ at
ffffffff81648ff8
Of course it may happen with other NIC drivers as well.
It's found the freed dst_entry here:
224 static bool tcp_in_quickack_mode(struct sock *sk)↩
225 {↩
226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩
227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩
228 ↩
229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩
230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩
231 }↩
But there are other backtraces attributed to the same freed dst_entry in
netfilter code as well.
All the vmcores showed 2 significant clues:
- Remote hosts behind the default gateway had always been redirected to a
different gateway. A rtable/dst_entry will be added for that host. Making
more dst_entrys with lower reference counts. Making this more probable.
- All vmcores showed a postitive LockDroppedIcmps value, e.g:
LockDroppedIcmps 267
A closer look at the tcp_v4_err() handler revealed that do_redirect() will run
regardless of whether user space has the socket locked. This can result in a
race condition where the same dst_entry cached in sk->sk_dst_entry can be
decremented twice for the same socket via:
do_redirect()->__sk_dst_check()-> dst_release().
Which leads to the dst_entry being prematurely freed with another socket
pointing to it via sk->sk_dst_cache and a subsequent crash.
To fix this skip do_redirect() if usespace has the socket locked. Instead let
the redirect take place later when user space does not have the socket
locked.
The dccp/IPv6 code is very similar in this respect, so fixing it there too.
As Eric Garver pointed out the following commit now invalidates routes. Which
can set the dst->obsolete flag so that ipv4_dst_check() returns null and
triggers the dst_release().
Fixes:
ceb3320610d6 ("ipv4: Kill routes during PMTU/redirect updates.")
Cc: Eric Garver <egarver@redhat.com>
Cc: Hannes Sowa <hsowa@redhat.com>
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhao Qiang [Tue, 14 Mar 2017 01:38:33 +0000 (09:38 +0800)]
ucc/hdlc: fix two little issue
1. modify bd_status from u32 to u16 in function hdlc_rx_done,
because bd_status register is 16bits
2. write bd_length register before writing bd_status register
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Mar 2017 04:51:51 +0000 (21:51 -0700)]
Merge branch 'bcmgenet-add-support-for-GENETv5'
Doug Berger says:
====================
net: bcmgenet: add support for GENETv5
This collection of patches contains changes related to adding
support for the BCM7260, BCM7268, and BCM7271 devices that
contain a new version of the GENET MAC IP block (v5) and a new
fast ethernet (10/100BASE-T) internal PHY.
These patches were originally developed on top of the bug fixes
of the "[PATCH v2 net 0/8] net: bcmgenet: minor bug fixes" patch
set previously accepted into the net repository, but this
submission is designed to be applied to the current net-next
that does not yet include them. As a result there will be some
merge conflicts that I would be happy to help resolve if desired.
Specifically, conflicts should occur with these patches from the
minor bug fixes set:
[PATCH v2 net 3/8] net: bcmgenet: reserved phy revisions must be checked first
[PATCH v2 net 5/8] net: bcmgenet: synchronize irq0 status between the isr and task
[PATCH v2 net 8/8] net: bcmgenet: decouple flow control from bcmgenet_tx_reclaim
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:42 +0000 (17:41 -0700)]
net: bcmgenet: add support for the GENETv5 hardware
This commit adds support for the GENETv5 implementation.
The GENETv5 reports a major version of 6 instead of 5 so compensate
for this when verifying the configuration of the driver. Also the
EPHY revision is now contained in the MDIO registers of the PHY so
the EPHY revision of 0 in GENET_VER_FMT is expected for GENETv5.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:41 +0000 (17:41 -0700)]
dt-bindings: net: update bcmgenet binding for GENETv5
The device tree documentation must be updated to reflect the new compatible
strings "brcm,genet-v5" and "brcm,genet-mdio-v5" used by the GENETv5 driver.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:40 +0000 (17:41 -0700)]
dt-bindings: net: document bcmgenet WoL interrupt
A third interrupt cell can be provided to optionally specify
the interrupt used for handling Wake on LAN events.
Typically the wake up handling uses a separate interrupt
controller, so the interrupts-extended property is used to
accommodate this.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:39 +0000 (17:41 -0700)]
net: bcmgenet: return EOPNOTSUPP for unknown ioctl commands
This commit changes the ioctl handling behavior to return the
EOPNOTSUPP error code instead of the EINVAL error code when an
unknown ioctl command value is detected.
It also removes some redundant parsing of the ioctl command value
and allows the SIOCSHWTSTAMP value to be handled.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:38 +0000 (17:41 -0700)]
net: bcmgenet: correct return value of __bcmgenet_tx_reclaim
The reclaim function should return the number of buffer descriptors
reclaimed, not just the number corresponding to skb packets.
Also, remove the unnecessary computation when updating the consumer
index.
While this is not a functional problem it could degrade performance
of napi in a fragmented transmit stream.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:37 +0000 (17:41 -0700)]
net: bcmgenet: clear status to reduce spurious interrupts
Since the DMA interrupt status is latched and the DMA servicing can be
polled, it is a good idea to clear the latched status of a DMA interrupt
before performing the service that would be invoked by the interrupt.
This prevents old status from causing spurious interrupts when the
interrupt is unmasked at a later time.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:36 +0000 (17:41 -0700)]
net: bcmgenet: remove handling of wol interrupts from isr0
The bcmgenet_wol_isr() handler performs the necessary processing for
waking from a GENET event. There is no necessary functionality behind
servicing the UMAC_IRQ_MPD_R event in the handling of isr0. Therefore
the code that unmasks and masks this interrupt and that gets invoked
in response to it is removed by this commit.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:35 +0000 (17:41 -0700)]
net: bcmgenet: manage dma interrupts in napi code
This commit moves DMA interrupt enabling out of init_umac() and adds
the masking of these interrupts to the napi enable and disable code.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:34 +0000 (17:41 -0700)]
net: bcmgenet: remove meaningless lines
An assortment of non-functional lines are removed to reduce confusion
and some typos in comments are corrected.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:33 +0000 (17:41 -0700)]
net: bcmgenet: simplify circular pointer arithmetic
A 2's complement subtraction will always do a borrow, so masking
off the sign bits is the same as conditionally adding (mask+1).
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:32 +0000 (17:41 -0700)]
net: phy: bcm7xxx: add support for 28nm EPHY
This commit adds support for the internal fast ethernet 10/100 PHY
found in the BCM7260, BCM7268, and BCM7271 devices.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Doug Berger [Tue, 14 Mar 2017 00:41:31 +0000 (17:41 -0700)]
net: phy: bcm-phylib: replace obsolete EEE macro references
The macros MDIO_AN_EEE_ADV_100TX and MDIO_AN_EEE_ADV_1000T are now
considered obsolete and are replaced in the kernel with the generic
macros MDIO_EEE_100TX and MDIO_EEE_1000T respectively.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 14 Mar 2017 02:48:22 +0000 (19:48 -0700)]
Merge tag 'powerpc-4.11-4' of git://git./linux/kernel/git/powerpc/linux
Pull some more powerpc fixes from Michael Ellerman:
"The main item is the addition of the Power9 Machine Check handler.
This was delayed to make sure some details were correct, and is as
minimal as possible.
The rest is small fixes, two for the Power9 PMU, two dealing with
obscure toolchain problems, two for the PowerNV IOMMU code (used by
VFIO), and one to fix a crash on 32-bit machines with macio devices
due to missing dma_ops.
Thanks to:
Alexey Kardashevskiy, Cyril Bur, Larry Finger, Madhavan Srinivasan,
Nicholas Piggin"
* tag 'powerpc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: POWER9 machine check handler
powerpc/64s: allow machine check handler to set severity and initiator
powerpc/64s: fix handling of non-synchronous machine checks
powerpc/pmac: Fix crash in dma-mapping.h with NULL dma_ops
powerpc/powernv/ioda2: Update iommu table base on ownership change
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
selftests/powerpc: Replace stxvx and lxvx with stxvd2x/lxvd2x
powerpc/perf: Handle sdar_mode for marked event in power9
powerpc/perf: Fix perf_get_data_addr() for power9 DD1
powerpc/boot: Fix zImage TOC alignment
Nicolas Dichtel [Mon, 13 Mar 2017 15:24:03 +0000 (16:24 +0100)]
vxlan: fix ovs support
The required changes in the function vxlan_dev_create() were missing
in commit
8bcdc4f3a20b.
The vxlan device is not registered anymore after this patch and the error
path causes an stack dump:
WARNING: CPU: 3 PID: 1498 at net/core/dev.c:6713 rollback_registered_many+0x9d/0x3f0
Fixes:
8bcdc4f3a20b ("vxlan: add changelink support")
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Vagin [Mon, 13 Mar 2017 04:36:18 +0000 (21:36 -0700)]
net: use net->count to check whether a netns is alive or not
The previous idea was to check whether a net namespace is in
net_exit_list or not. It doesn't work, because net->exit_list is used in
__register_pernet_operations and __unregister_pernet_operations where
all namespaces are added to a temporary list to make cleanup in a error
case, so list_empty(&net->exit_list) always returns false.
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Fixes:
002d8a1a6c11 ("net: skip genenerating uevents for network namespaces that are exiting")
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Francois Romieu [Sun, 12 Mar 2017 00:41:36 +0000 (19:41 -0500)]
atm: remove an unnecessary loop
Andrey reported this kernel warning:
WARNING: CPU: 0 PID: 4114 at kernel/sched/core.c:7737 __might_sleep+0x149/0x1a0
do not call blocking ops when !TASK_RUNNING; state=1 set at
[<
ffffffff813fcb22>] prepare_to_wait+0x182/0x530
The deeply nested alloc_skb is a problem.
Diagnosis: nesting is wrong. It makes zero sense. Fix it and the
implicit task state change problem automagically goes away.
alloc_skb() does not need to be in the "while" loop.
alloc_skb() does not need to be in the {prepare_to_wait/add_wait_queue ...
finish_wait/remove_wait_queue} block.
I claim that:
- alloc_tx() should only perform the "wait_for_decent_tx_drain" part
- alloc_skb() ought to be done directly in vcc_sendmsg
- alloc_skb() failure can be handled gracefully in vcc_sendmsg
- alloc_skb() may use a (m->msg_flags & MSG_DONTWAIT) dependent
GFP_{KERNEL / ATOMIC} flag
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-and-Tested-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sat, 11 Mar 2017 16:39:18 +0000 (18:39 +0200)]
qed*: Utilize Firmware 8.15.3.0
This patch advances the qed* drivers into using the newer firmware -
This solves several firmware bugs, mostly related [but not limited to]
various init/deinit issues in various offloaded protocols.
It also introduces a major 4-Cached SGE change in firmware, which can be
seen in the storage drivers' changes.
In addition, this firmware is required for supporting the new QL41xxx
series of adapters; While this patch doesn't add the actual support,
the firmware contains the necessary initialization & firmware logic to
operate such adapters [actual support would be added later on].
Changes from Previous versions:
-------------------------------
- V2 - fix kbuild-test robot warnings
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 13 Mar 2017 22:29:23 +0000 (15:29 -0700)]
Merge branch 'mpls-ttl-propagation'
Robert Shearman says:
====================
mpls: allow TTL propagation from IP packets to be configured
Allow TTL propagation from IP packets to MPLS packets to be
configured. Add a new optional LWT attribute, MPLS_IPTUNNEL_TTL, which
allows the TTL to be set in the resulting MPLS packet, with the value
of 0 having the semantics of enabling propagation of the TTL from the
IP header (i.e. non-zero values disable propagation).
Also allow the configuration to be overridden globally by reusing the
same sysctl to control whether the TTL is propagated from IP packets
into the MPLS header. If the per-LWT attribute is set then it
overrides the global configuration. If the TTL isn't propagated then a
default TTL value is used which can be configured via a new sysctl,
"net.mpls.default_ttl". This is kept separate from the configuration
of whether IP TTL propagation is enabled as it can be used in the
future when non-IP payloads are supported (i.e. where there is no
payload TTL that can be propagated).
====================
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Shearman [Fri, 10 Mar 2017 20:43:25 +0000 (20:43 +0000)]
mpls: allow TTL propagation from IP packets to be configured
Allow TTL propagation from IP packets to MPLS packets to be
configured. Add a new optional LWT attribute, MPLS_IPTUNNEL_TTL, which
allows the TTL to be set in the resulting MPLS packet, with the value
of 0 having the semantics of enabling propagation of the TTL from the
IP header (i.e. non-zero values disable propagation).
Also allow the configuration to be overridden globally by reusing the
same sysctl to control whether the TTL is propagated from IP packets
into the MPLS header. If the per-LWT attribute is set then it
overrides the global configuration. If the TTL isn't propagated then a
default TTL value is used which can be configured via a new sysctl,
"net.mpls.default_ttl". This is kept separate from the configuration
of whether IP TTL propagation is enabled as it can be used in the
future when non-IP payloads are supported (i.e. where there is no
payload TTL that can be propagated).
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>