OSDN Git Service
Xie He [Sat, 31 Oct 2020 18:10:39 +0000 (11:10 -0700)]
net: hdlc_fr: Simpify fr_rx by using "goto rx_drop" to drop frames
When the fr_rx function drops a received frame (because the protocol type
is not supported, or because the PVC virtual device that corresponds to
the DLCI number and the protocol type doesn't exist), the function frees
the skb and returns.
The code for freeing the skb and returning is repeated several times, this
patch uses "goto rx_drop" to replace them so that the code looks cleaner.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lijun Pan [Sat, 31 Oct 2020 09:46:45 +0000 (04:46 -0500)]
ibmvnic: merge do_change_param_reset into do_reset
Commit
b27507bb59ed ("net/ibmvnic: unlock rtnl_lock in reset so
linkwatch_event can run") introduced do_change_param_reset function to
solve the rtnl lock issue. Majority of the code in do_change_param_reset
duplicates do_reset. Also, we can handle the rtnl lock issue in do_reset
itself. Hence merge do_change_param_reset back into do_reset to clean up
the code.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201031094645.17255-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Sat, 31 Oct 2020 00:07:25 +0000 (01:07 +0100)]
mpls: drop skb's dst in mpls_forward()
Commit
394de110a733 ("net: Added pointer check for
dst->ops->neigh_lookup in dst_neigh_lookup_skb") added a test in
dst_neigh_lookup_skb() to avoid a NULL pointer dereference. The root
cause was the MPLS forwarding code, which doesn't call skb_dst_drop()
on incoming packets. That is, if the packet is received from a
collect_md device, it has a metadata_dst attached to it that doesn't
implement any dst_ops function.
To align the MPLS behaviour with IPv4 and IPv6, let's drop the dst in
mpls_forward(). This way, dst_neigh_lookup_skb() doesn't need to test
->neigh_lookup any more. Let's keep a WARN condition though, to
document the precondition and to ease detection of such problems in the
future.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/f8c2784c13faa54469a2aac339470b1049ca6b63.1604102750.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Nov 2020 02:01:45 +0000 (18:01 -0800)]
Merge branch 'net-mac80211-kernel-enable-kcov-remote-coverage-collection-for-802-11-frame-handling'
Aleksandr Nogikh says:
====================
net, mac80211, kernel: enable KCOV remote coverage collection for 802.11 frame handling
This patch series enables remote KCOV coverage collection during
802.11 frames processing. These changes make it possible to perform
coverage-guided fuzzing in search of remotely triggerable bugs.
Normally, KCOV collects coverage information for the code that is
executed inside the system call context. It is easy to identify where
that coverage should go and whether it should be collected at all by
looking at the current process. If KCOV was enabled on that process,
coverage will be stored in a buffer specific to that process.
Howerever, it is not always enough as handling can happen elsewhere
(e.g. in separate kernel threads).
When it is impossible to infer KCOV-related info just by looking at
the currently running process, one needs to manually pass some
information to the code that should be instrumented. The information
takes the form of 64 bit integers (KCOV remote handles). Zero is the
special value that corresponds to an empty handle. More details on
KCOV and remote coverage collection can be found in
Documentation/dev-tools/kcov.rst.
The series consists of three commits.
1. Apply a minor fix to kcov_common_handle() so that it returns a
valid handle (zero) when called in an interrupt context.
2. Take the remote handle from KCOV and attach it to newly allocated
SKBs as an skb extension. If the allocation happens inside a system
call context, the SKB will be tied to the process that issued the
syscall (if that process is interested in remote coverage collection).
3. Annotate the code that processes incoming 802.11 frames with
kcov_remote_start()/kcov_remote_stop().
v5:
* Collecting remote coverate at ieee80211_rx_list() instead of
ieee80211_rx()
v4:
https://lkml.kernel.org/r/
20201028182018.
1780842-1-aleksandrnogikh@gmail.com
* CONFIG_SKB_EXTENSIONS is now automatically selected by CONFIG_KCOV.
* Elaborated on a minor optimization in skb_set_kcov_handle().
v3:
https://lkml.kernel.org/r/
20201026150851.528148-1-aleksandrnogikh@gmail.com
* kcov_handle is now stored in skb extensions instead of sk_buff
itself.
* Updated the cover letter.
v2:
https://lkml.kernel.org/r/
20201009170202.103512-1-a.nogikh@gmail.com
* Moved KCOV annotations from ieee80211_tasklet_handler to
ieee80211_rx.
* Updated kcov_common_handle() to return 0 if it is called in
interrupt context.
* Updated the cover letter.
v1:
https://lkml.kernel.org/r/
20201007101726.
3149375-1-a.nogikh@gmail.com
====================
Link: https://lore.kernel.org/r/20201029173620.2121359-1-aleksandrnogikh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aleksandr Nogikh [Thu, 29 Oct 2020 17:36:20 +0000 (17:36 +0000)]
mac80211: add KCOV remote annotations to incoming frame processing
Add KCOV remote annotations to ieee80211_iface_work() and
ieee80211_rx_list(). This will enable coverage-guided fuzzing of
mac80211 code that processes incoming 802.11 frames.
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aleksandr Nogikh [Thu, 29 Oct 2020 17:36:19 +0000 (17:36 +0000)]
net: add kcov handle to skb extensions
Remote KCOV coverage collection enables coverage-guided fuzzing of the
code that is not reachable during normal system call execution. It is
especially helpful for fuzzing networking subsystems, where it is
common to perform packet handling in separate work queues even for the
packets that originated directly from the user space.
Enable coverage-guided frame injection by adding kcov remote handle to
skb extensions. Default initialization in __alloc_skb and
__build_skb_around ensures that no socket buffer that was generated
during a system call will be missed.
Code that is of interest and that performs packet processing should be
annotated with kcov_remote_start()/kcov_remote_stop().
An alternative approach is to determine kcov_handle solely on the
basis of the device/interface that received the specific socket
buffer. However, in this case it would be impossible to distinguish
between packets that originated during normal background network
processes or were intentionally injected from the user space.
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aleksandr Nogikh [Thu, 29 Oct 2020 17:36:18 +0000 (17:36 +0000)]
kernel: make kcov_common_handle consider the current context
kcov_common_handle is a method that is used to obtain a "default" KCOV
remote handle of the current process. The handle can later be passed
to kcov_remote_start in order to collect coverage for the processing
that is initiated by one process, but done in another. For details see
Documentation/dev-tools/kcov.rst and comments in kernel/kcov.c.
Presently, if kcov_common_handle is called in an IRQ context, it will
return a handle for the interrupted process. This may lead to
unreliable and incorrect coverage collection.
Adjust the behavior of kcov_common_handle in the following way. If it
is called in a task context, return the common handle for the
currently running task. Otherwise, return 0.
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Sat, 31 Oct 2020 15:30:47 +0000 (08:30 -0700)]
net: dsa: mt7530: remove unneeded semicolon
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201031153047.2147341-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Sun, 1 Nov 2020 14:05:28 +0000 (06:05 -0800)]
net/mlx4_core : remove unneeded semicolon
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20201101140528.2279424-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Sun, 1 Nov 2020 14:07:20 +0000 (06:07 -0800)]
net: stmmac: dwmac-meson8b: remove unneeded semicolon
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201101140720.2280013-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Sun, 1 Nov 2020 15:36:47 +0000 (07:36 -0800)]
net: core: remove unneeded semicolon
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20201101153647.2292322-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Sun, 1 Nov 2020 15:56:01 +0000 (07:56 -0800)]
ethtool: remove unneeded semicolon
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201101155601.2294374-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Rix [Sun, 1 Nov 2020 15:58:22 +0000 (07:58 -0800)]
tipc: remove unneeded semicolon
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201101155822.2294856-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Nov 2020 01:41:19 +0000 (17:41 -0800)]
Merge branch 'generic-tx-reallocation-for-dsa'
Vladimir Oltean says:
====================
Generic TX reallocation for DSA
Christian has reported buggy usage of skb_put() in tag_ksz.c, which is
only triggerable in real life using his not-yet-published patches for
IEEE 1588 timestamping on Micrel KSZ switches.
The concrete problem there is that the driver can end up calling
skb_put() and exceed the end of the skb data area, because even though
it had reallocated the frame once before, it hadn't reallocated it large
enough. Christian explained it in more detail here:
https://lore.kernel.org/netdev/
20201014161719.30289-1-ceggers@arri.de/
https://lore.kernel.org/netdev/
20201016200226.23994-1-ceggers@arri.de/
But actually there's a bigger problem, which is that some taggers which
get more rarely tested tend to do some shenanigans which are uncaught
for the longest time, and in the meanwhile, their code gets copy-pasted
into other taggers, creating a mess. For example, the tail tagging
driver for Marvell
88E6060 currently reallocates _every_single_frame_ on
TX. Is that an obvious indication that nobody is using it? Sure. Is it a
good model to follow when developing a new tail tagging driver? No.
DSA has all the information it needs in order to simplify the job of a
tagger on TX. It knows whether it's a normal or a tail tagger, and what
is the protocol overhead it incurs. So this series performs the
reallocation centrally.
Changes in v3:
- Use dev_kfree_skb_any due to potential hardirq context in xmit path.
Changes in v2:
- Dropped the tx_realloc counters for now, since the patch was pretty
controversial and I lack the time at the moment to introduce new UAPI
for that.
- Do padding for tail taggers irrespective of whether they need to
reallocate the skb or not.
====================
Link: https://lore.kernel.org/r/20201101191620.589272-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:20 +0000 (21:16 +0200)]
net: dsa: tag_ar9331: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Cc: Per Forlin <per.forlin@axis.com>
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:19 +0000 (21:16 +0200)]
net: dsa: tag_gswip: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
This one is interesting, the DSA tag is 8 bytes on RX and 4 bytes on TX.
Because DSA is unaware of asymmetrical tag lengths, the overhead/needed
headroom is declared as 8 bytes and therefore 4 bytes larger than it
needs to be. If this becomes a problem, and the GSWIP driver can't be
converted to a uniform header length, we might need to make DSA aware of
separate RX/TX overhead values.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:18 +0000 (21:16 +0200)]
net: dsa: tag_dsa: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Similar to the EtherType DSA tagger, the old Marvell tagger can
transform an 802.1Q header if present into a DSA tag, so there is no
headroom required in that case. But we are ensuring that it exists,
regardless (practically speaking, the headroom must be 4 bytes larger
than it needs to be).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:17 +0000 (21:16 +0200)]
net: dsa: tag_brcm: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:16 +0000 (21:16 +0200)]
net: dsa: tag_edsa: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Note that the VLAN code path needs a smaller extra headroom than the
regular EtherType DSA path. That isn't a problem, because this tagger
declares the larger tag length (8 bytes vs 4) as the protocol overhead,
so we are covered in both cases.
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:15 +0000 (21:16 +0200)]
net: dsa: tag_lan9303: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:14 +0000 (21:16 +0200)]
net: dsa: tag_mtk: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:13 +0000 (21:16 +0200)]
net: dsa: tag_ocelot: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:12 +0000 (21:16 +0200)]
net: dsa: tag_qca: let DSA core deal with TX reallocation
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Cc: John Crispin <john@phrozen.org>
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Eggers [Sun, 1 Nov 2020 19:16:11 +0000 (21:16 +0200)]
net: dsa: trailer: don't allocate additional memory for padding/tagging
The caller (dsa_slave_xmit) guarantees that the frame length is at least
ETH_ZLEN and that enough memory for tail tagging is available.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Eggers [Sun, 1 Nov 2020 19:16:10 +0000 (21:16 +0200)]
net: dsa: tag_ksz: don't allocate additional memory for padding/tagging
The caller (dsa_slave_xmit) guarantees that the frame length is at least
ETH_ZLEN and that enough memory for tail tagging is available.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 19:16:09 +0000 (21:16 +0200)]
net: dsa: implement a central TX reallocation procedure
At the moment, taggers are left with the task of ensuring that the skb
headers are writable (which they aren't, if the frames were cloned for
TX timestamping, for flooding by the bridge, etc), and that there is
enough space in the skb data area for the DSA tag to be pushed.
Moreover, the life of tail taggers is even harder, because they need to
ensure that short frames have enough padding, a problem that normal
taggers don't have.
The principle of the DSA framework is that everything except for the
most intimate hardware specifics (like in this case, the actual packing
of the DSA tag bits) should be done inside the core, to avoid having
code paths that are very rarely tested.
So provide a TX reallocation procedure that should cover the known needs
of DSA today.
Note that this patch also gives the network stack a good hint about the
headroom/tailroom it's going to need. Up till now it wasn't doing that.
So the reallocation procedure should really be there only for the
exceptional cases, and for cloned packets which need to be unshared.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Christian Eggers <ceggers@arri.de> # For tail taggers only
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YueHaibing [Sat, 31 Oct 2020 06:01:53 +0000 (14:01 +0800)]
openvswitch: Use IS_ERR instead of IS_ERR_OR_NULL
Fix smatch warning:
net/openvswitch/meter.c:427 ovs_meter_cmd_set() warn: passing zero to 'PTR_ERR'
dp_meter_create() never returns NULL, use IS_ERR
instead of IS_ERR_OR_NULL to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Link: https://lore.kernel.org/r/20201031060153.39912-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YueHaibing [Sat, 31 Oct 2020 02:49:40 +0000 (10:49 +0800)]
net: hns3: Remove duplicated include
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20201031024940.29716-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YueHaibing [Sat, 31 Oct 2020 02:47:44 +0000 (10:47 +0800)]
liquidio: cn68xx: Remove duplicated include
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20201031024744.39020-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yuchung Cheng [Sat, 31 Oct 2020 01:34:12 +0000 (18:34 -0700)]
tcp: avoid slow start during fast recovery on new losses
During TCP fast recovery, the congestion control in charge is by
default the Proportional Rate Reduction (PRR) unless the congestion
control module specified otherwise (e.g. BBR).
Previously when tcp_packets_in_flight() is below snd_ssthresh PRR
would slow start upon receiving an ACK that
1) cumulatively acknowledges retransmitted data
and
2) does not detect further lost retransmission
Such conditions indicate the repair is in good steady progress
after the first round trip of recovery. Otherwise PRR adopts the
packet conservation principle to send only the amount that was
newly delivered (indicated by this ACK).
This patch generalizes the previous design principle to include
also the newly sent data beside retransmission: as long as
the delivery is making good progress, both retransmission and
new data should be accounted to make PRR more cautious in slow
starting.
Suggested-by: Matt Mathis <mattmathis@google.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201031013412.1973112-1-ycheng@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Nov 2020 01:09:10 +0000 (17:09 -0800)]
Merge branch 'vlan-improvements-for-ocelot-switch'
Vladimir Oltean says:
====================
VLAN improvements for Ocelot switch
The main reason why I started this work is that deleting the bridge mdb
entries fails when the bridge is deleted, as described here:
https://lore.kernel.org/netdev/
20201015173355.564934-1-vladimir.oltean@nxp.com/
In short, that happens because the bridge mdb entries are added with a
vid of 1, but deletion is attempted with a vid of 0. So the deletion
code fails to find the mdb entries.
The solution is to make ocelot use a pvid of 0 when it is under a bridge
with vlan_filtering 0. When vlan_filtering is 1, the pvid of the bridge
is what is programmed into the hardware.
The patch series also uncovers more bugs and does some more cleanup, but
the above is the main idea behind it.
====================
Link: https://lore.kernel.org/r/20201031102916.667619-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 31 Oct 2020 10:29:16 +0000 (12:29 +0200)]
net: dsa: felix: improve the workaround for multiple native VLANs on NPI port
After the good discussion with Florian from here:
https://lore.kernel.org/netdev/
20200911000337.htwr366ng3nc3a7d@skbuf/
I realized that the VLAN settings on the NPI port (the hardware "CPU port",
in DSA parlance) don't actually make any difference, because that port
is hardcoded in hardware to use what mv88e6xxx would call "unmodified"
egress policy for VLANs.
So earlier patch
183be6f967fe ("net: dsa: felix: send VLANs on CPU port
as egress-tagged") was incorrect in the sense that it didn't actually
make the VLANs be sent on the NPI port as egress-tagged. It only made
ocelot_port_set_native_vlan shut up.
Now that we have moved the check from ocelot_port_set_native_vlan to
ocelot_vlan_prepare, we can simply shunt ocelot_vlan_prepare from DSA,
and avoid calling it. This is the correct way to deal with things,
because the NPI port configuration is DSA-specific, so the ocelot switch
library should not have the check for multiple native VLANs refined in
any way, it is correct the way it is.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 31 Oct 2020 10:29:15 +0000 (12:29 +0200)]
net: mscc: ocelot: deny changing the native VLAN from the prepare phase
Put the preparation phase of switchdev VLAN objects to some good use,
and move the check we already had, for preventing the existence of more
than one egress-untagged VLAN per port, to the preparation phase of the
addition.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 31 Oct 2020 10:29:14 +0000 (12:29 +0200)]
net: mscc: ocelot: move the logic to drop 802.1p traffic to the pvid deletion
Currently, the ocelot_port_set_native_vlan() function starts dropping
untagged and prio-tagged traffic when the native VLAN is removed?
What is the native VLAN? It is the only egress-untagged VLAN that ocelot
supports on a port. If the port is a trunk with 100 VLANs, one of those
VLANs can be transmitted as egress-untagged, and that's the native VLAN.
Is it wrong to drop untagged and prio-tagged traffic if there's no
native VLAN? Yes and no.
In this case, which is more typical, it's ok to apply that drop
configuration:
$ bridge vlan add dev swp0 vid 1 pvid untagged <- this is the native VLAN
$ bridge vlan add dev swp0 vid 100
$ bridge vlan add dev swp0 vid 101
$ bridge vlan del dev swp0 vid 1 <- delete the native VLAN
But only because the pvid and the native VLAN have the same ID.
In this case, it isn't:
$ bridge vlan add dev swp0 vid 1 pvid
$ bridge vlan add dev swp0 vid 100 untagged <- this is the native VLAN
$ bridge vlan del dev swp0 vid 101
$ bridge vlan del dev swp0 vid 100 <- delete the native VLAN
It's wrong, because the switch will drop untagged and prio-tagged
traffic now, despite having a valid pvid of 1.
The confusion seems to stem from the fact that the native VLAN is an
egress setting, while the PVID is an ingress setting. It would be
correct to drop untagged and prio-tagged traffic only if there was no
pvid on the port. So let's do just that.
Background:
https://lore.kernel.org/netdev/CA+h21hrRMrLH-RjBGhEJSTZd6_QPRSd3RkVRQF-wNKkrgKcRSA@mail.gmail.com/#t
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 31 Oct 2020 10:29:13 +0000 (12:29 +0200)]
net: mscc: ocelot: add a "valid" boolean to struct ocelot_vlan
Currently we are checking in some places whether the port has a native
VLAN on egress or not, by comparing the ocelot_port->vid value with zero.
That works, because VID 0 can never be a native VLAN configured by the
bridge, but now we want to make similar checks for the pvid. That won't
work, because there are cases when we do have the pvid set to 0 (not by
the bridge, by ourselves, but still.. it's confusing). And we can't
encode a negative value into an u16, so add a bool to the structure.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 31 Oct 2020 10:29:12 +0000 (12:29 +0200)]
net: mscc: ocelot: transform the pvid and native vlan values into a structure
This is a mechanical patch only.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 31 Oct 2020 10:29:11 +0000 (12:29 +0200)]
net: mscc: ocelot: don't reset the pvid to 0 when deleting it
I have no idea why this code is here, but I have 2 hypotheses:
1.
A desperate attempt to keep untagged traffic working when the bridge
deletes the pvid on a port.
There was a fairly okay discussion here:
https://lore.kernel.org/netdev/CA+h21hrRMrLH-RjBGhEJSTZd6_QPRSd3RkVRQF-wNKkrgKcRSA@mail.gmail.com/#t
which established that in vlan_filtering=1 mode, the absence of a pvid
should denote that the ingress port should drop untagged and priority
tagged traffic. While in vlan_filtering=0 mode, nothing should change.
So in vlan_filtering=1 mode, we should simply let things happen, and not
attempt to save the day. And in vlan_filtering=0 mode, the pvid is 0
anyway, no need to do anything.
2.
The driver encodes the native VLAN (ocelot_port->vid) value of 0 as
special, meaning "not valid". There are checks based on that. But there
are no such checks for the ocelot_port->pvid value of 0. In fact, that's
a perfectly valid value, which is used in standalone mode. Maybe there
was some confusion and the author thought that 0 means "invalid" here as
well.
In conclusion, delete the code*.
*in fact we'll add it back later, in a slightly different form, but for
an entirely different reason than the one for which this exists now.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sat, 31 Oct 2020 10:29:10 +0000 (12:29 +0200)]
net: mscc: ocelot: use the pvid of zero when bridged with vlan_filtering=0
Currently, mscc_ocelot ports configure pvid=0 in standalone mode, and
inherit the pvid from the bridge when one is present.
When the bridge has vlan_filtering=0, the software semantics are that
packets should be received regardless of whether there's a pvid
configured on the ingress port or not. However, ocelot does not observe
those semantics today.
Moreover, changing the PVID is also a problem with vlan_filtering=0.
We are privately remapping the VID of FDB, MDB entries to the port's
PVID when those are VLAN-unaware (i.e. when the VID of these entries
comes to us as 0). But we have no logic of adjusting that remapping when
the user changes the pvid and vlan_filtering is 0. So stale entries
would be left behind, and untagged traffic will stop matching on them.
And even if we were to solve that, there's an even bigger problem. If
swp0 has pvid 1, and swp1 has pvid 2, and both are under a vlan_filtering=0
bridge, they should be able to forward traffic between one another.
However, with ocelot they wouldn't do that.
The simplest way of fixing this is to never configure the pvid based on
what the bridge is asking for, when vlan_filtering is 0. Only if there
was a VLAN that the bridge couldn't mangle, that we could use as pvid....
So, turns out, there's 0 just for that. And for a reason: IEEE
802.1Q-2018, page 247, Table 9-2-Reserved VID values says:
The null VID. Indicates that the tag header contains only
priority information; no VID is present in the frame.
This VID value shall not be configured as a PVID or a member
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
of a VID Set, or configured in any FDB entry, or used in any
Management operation.
So, aren't we doing exactly what 802.1Q says not to? Well, in a way, but
what we're doing here is just driver-level bookkeeping, all for the
better. The fact that we're using a pvid of 0 is not observable behavior
from the outside world: the network stack does not see the classified
VLAN that the switch uses, in vlan_filtering=0 mode. And we're also more
consistent with the standalone mode now.
And now that we use the pvid of 0 in this mode, there's another advantage:
we don't need to perform any VID remapping for FDB and MDB entries either,
we can just use the VID of 0 that the bridge is passing to us.
The only gotcha is that every time we change the vlan_filtering setting,
we need to reapply the pvid (either to 0, or to the value from the bridge).
A small side-effect visible in the patch is that ocelot_port_set_pvid
needs to be moved above ocelot_port_vlan_filtering, so that it can be
called from there without forward-declarations.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 3 Nov 2020 00:41:09 +0000 (16:41 -0800)]
Merge branch 'net-ethernet-ti-am65-cpsw-add-multi-port-support-in-mac-only-mode'
Grygorii Strashko says:
====================
net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode
This series adds multi-port support in mac-only mode (multi MAC mode) to TI
AM65x CPSW driver in preparation for enabling support for multi-port devices,
like Main CPSW0 on K3 J721E SoC or future CPSW3g on K3 AM64x SoC.
The multi MAC mode is implemented by configuring every enabled port in "mac-only"
mode (all ingress packets are sent only to the Host port and egress packets
directed to target Ext. Port) and creating separate net_device for
every enabled Ext. port.
This series does not affect on existing CPSW2g one Ext. Port devices and xmit
path changes are done only for multi-port devices by splitting xmit path for
one-port and multi-port devices.
Patches 1-3: Preparation patches to improve K3 CPSW configuration depending on DT
Patches 4-5: Fix VLAN offload for multi MAC mode
Patch 6: Fixes CPTS context lose issue during PM runtime transition
Patch 7: Fixes TX csum offload for multi MAC mode
Patches 8-9: add multi-port support to TI AM65x CPSW
Patch 10: handle deferred probe with new dev_err_probe() API
changes in v3:
- rebased
- added Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
- added Patch 10 which is minor optimization
changes in v2:
- patch 8: xmit path split for one-port and multi-port devices to avoid
performance losses
- patch 9: fixed the case when Port 1 is disabled
- Patch 7: added fix for TX csum offload
v2: https://lore.kernel.org/patchwork/cover/
1321608/
v1: https://lore.kernel.org/patchwork/cover/
1315766/
====================
Link: https://lore.kernel.org/r/20201030200707.24294-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:07:07 +0000 (22:07 +0200)]
net: ethernet: ti: am65-cpsw: handle deferred probe with dev_err_probe()
Use new dev_err_probe() API to handle deferred probe properly and simplify
the code.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:07:06 +0000 (22:07 +0200)]
net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode
This patch adds final multi-port support to TI AM65x CPSW driver path in
preparation for adding support for multi-port devices, like Main CPSW0 on
K3 J721E SoC or future CPSW3g on K3 AM64x SoC.
- the separate netdev is created for every enabled external Port;
- DMA channels are common/shared for all external Ports and the RX/TX NAPI
and DMA processing assigned to first available netdev;
- external Ports are configured in mac-only mode, which is similar to TI
"dual-mac" mode for legacy TI CPSW - packets are sent to the Host port only
in ingress and directly to the Port on egress. No packet switching between
external ports happens.
- every port supports the same features as current AM65x CPSW on external
device.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:07:05 +0000 (22:07 +0200)]
net: ethernet: ti: am65-cpsw: prepare xmit/rx path for multi-port devices in mac-only mode
This patch adds multi-port support to TI AM65x CPSW driver xmit/rx path in
preparation for adding support for multi-port devices, like Main CPSW0 on
K3 J721E SoC or future CPSW3g on K3 AM64x SoC.
Hence DMA channels are common/shared for all ext Ports and the RX/TX NAPI
and DMA processing going to be assigned to first available netdev this patch:
- ensures all RX descriptors fields are initialized;
- adds synchronization for TX DMA push/pop operation (locking) as
Networking core locks are not enough any more;
- updates TX bql processing for every packet in
am65_cpsw_nuss_tx_compl_packets() as every completed TX skb can have
different ndev assigned (come from different netdevs).
To avoid performance issues for existing one-port CPSW2g devices the above
changes are done only for multi-port devices by splitting xmit path for
one-port and multi-port devices.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:07:04 +0000 (22:07 +0200)]
net: ethernet: ti: am65-cpsw: fix tx csum offload for multi mac mode
The current implementation uses .ndo_set_features() callback to track
NETIF_F_HW_CSUM feature changes and update generic
CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option accordingly. It's not going to
work in case of multi-port devices as TX csum offload can be changed per
netdev.
On K3 CPSWxG devices TX csum offload enabled in the following way:
- the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option enables TX csum offload in
generic and affects all TX DMA channels and packets;
- corresponding fields in TX DMA descriptor have to be filed properly when
upper layer wants to offload TX csum (skb->ip_summed == CHECKSUM_PARTIAL)
and it's per-packet option.
The Linux Network core is expected to never request TX csum offload if
netdev NETIF_F_HW_CSUM feature is disabled, and, as result, TX DMA
descriptors should not be modified, and per-packet TX csum offload will be
disabled (or enabled) on per-netdev basis. Which, in turn, makes it safe to
enable the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option unconditionally.
Hence, fix TX csum offload for multi-port devices by:
- enabling the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option in
am65_cpsw_nuss_common_open() unconditionally
- and removing .ndo_set_features() callback implementation, which was used
only NETIF_F_HW_CSUM feature update purposes
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:07:03 +0000 (22:07 +0200)]
net: ethernet: ti: am65-cpsw: keep active if cpts enabled
Some K3 CPSW NUSS instances can lose context after PM runtime ON->OFF->ON
transition depending on integration (including all submodules: CPTS, MDIO,
etc), like J721E Main CPSW (CPSW9G).
In case CPTS is enabled it's initialized during probe and does not expect
to be reset. Hence, keep K3 CPSW active by forbidding PM runtime if CPTS is
enabled.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:07:02 +0000 (22:07 +0200)]
net: ethernet: ti: am65-cpsw: fix vlan offload for multi mac mode
The VLAN offload for AM65x CPSW2G is implemented using existing ALE APIs,
which are also used by legacy CPSW drivers.
So, now it always adds current Ext. Port and Host as VLAN members when VLAN
is added by 8021Q core (.ndo_vlan_rx_add_vid) and forcibly removes VLAN
from ALE table in .ndo_vlan_rx_kill_vid(). This works as for AM65x CPSW2G
(which has only one Ext. Port) as for legacy CPSW devices (which can't
support same VLAN on more then one Port in multi mac (dual-mac) mode). But
it doesn't work for the new J721E and AM64x multi port CPSWxG versions
doesn't have such restrictions and allow to offload the same VLAN on any
number of ports.
Now the attempt to add same VLAN on two (or more) K3 CPSWxG Ports will
cause:
- VLAN members mask overwrite when VLAN is added
- VLAN removal from ALE table when any Port removes VLAN
This patch fixes an issue by:
- switching to use cpsw_ale_vlan_add_modify() instead of
cpsw_ale_add_vlan() when VLAN is added to ALE table, so VLAN members
mask will not be overwritten;
- Updates cpsw_ale_del_vlan() as:
if more than one ext. Port is in VLAN member mask
then remove only current port from VLAN member mask
else remove VLAN ALE entry
Example:
add: P1 | P0 (Host) -> members mask: P1 | P0
add: P2 | P0 -> members mask: P2 | P1 | P0
rem: P1 | P0 -> members mask: P2 | P0
rem: P2 | P0 -> members mask: -
The VLAN is forcibly removed if port_mask=0 passed to cpsw_ale_del_vlan()
to preserve existing legacy CPSW drivers functionality.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:07:01 +0000 (22:07 +0200)]
net: ethernet: ti: cpsw_ale: add cpsw_ale_vlan_del_modify()
Add/export cpsw_ale_vlan_del_modify() and use it in cpsw_switchdev instead
of generic cpsw_ale_del_vlan() to avoid mixing 8021Q and switchdev VLAN
offload. This is preparation patch equired by follow up changes.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:07:00 +0000 (22:07 +0200)]
net: ethernet: ti: am65-cpsw: use cppi5_desc_is_tdcm()
Use cppi5_desc_is_tdcm() helper for teardown indicator detection instead of
hard-coded value.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:06:59 +0000 (22:06 +0200)]
net: ethernet: ti: am65-cpsw: move free desc queue mode selection in pdata
In preparation of adding more multi-port K3 CPSW versions move free
descriptor queue mode selection in am65_cpsw_pdata, so it can be selected
basing on DT compatibility property.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Fri, 30 Oct 2020 20:06:58 +0000 (22:06 +0200)]
net: ethernet: ti: am65-cpsw: move ale selection in pdata
In preparation of adding more multi-port K3 CPSW versions move ALE
selection in am65_cpsw_pdata, so it can be selected basing on DT
compatibility property.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Sat, 31 Oct 2020 18:30:44 +0000 (19:30 +0100)]
net: ipv6: For kerneldoc warnings with W=1
net/ipv6/addrconf.c:2005: warning: Function parameter or member 'dev' not described in 'ipv6_dev_find'
net/ipv6/ip6_vti.c:138: warning: Function parameter or member 'ip6n' not described in 'vti6_tnl_bucket'
net/ipv6/ip6_tunnel.c:218: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_bucket'
net/ipv6/ip6_tunnel.c:238: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_link'
net/ipv6/ip6_tunnel.c:254: warning: Function parameter or member 'ip6n' not described in 'ip6_tnl_unlink'
net/ipv6/ip6_tunnel.c:427: warning: Function parameter or member 'raw' not described in 'ip6_tnl_parse_tlv_enc_lim'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'skb' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'ipproto' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'opt' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'type' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'code' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'msg' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'info' not described in 'ip6_tnl_err'
net/ipv6/ip6_tunnel.c:499: warning: Function parameter or member 'offset' not described in 'ip6_tnl_err'
ip6_tnl_err() is an internal function, so remove the kerneldoc. For
the others, add the missing parameters.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201031183044.1082193-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Sat, 31 Oct 2020 18:17:00 +0000 (19:17 +0100)]
net: driver: hamradio: Fix potential unterminated string
With W=1 the following error is reported:
In function ‘strncpy’,
inlined from ‘hdlcdrv_ioctl’ at drivers/net/hamradio/hdlcdrv.c:600:4:
./include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
297 | #define __underlying_strncpy __builtin_strncpy
| ^
./include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
307 | return __underlying_strncpy(p, q, size);
Replace strncpy with strlcpy to guarantee the string is terminated.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201031181700.1081693-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Sat, 31 Oct 2020 18:14:17 +0000 (19:14 +0100)]
drivers: net: wan: lmc: Fix W=1 set but used variable warnings
drivers/net/wan/lmc/lmc_main.c: In function ‘lmc_ioctl’:
drivers/net/wan/lmc/lmc_main.c:356:25: warning: variable ‘mii’ set but not used [-Wunused-but-set-variable]
356 | u16 mii;
| ^~~
drivers/net/wan/lmc/lmc_main.c:427:25: warning: variable ‘mii’ set but not used [-Wunused-but-set-variable]
427 | u16 mii;
| ^~~
drivers/net/wan/lmc/lmc_main.c: In function ‘lmc_interrupt’:
drivers/net/wan/lmc/lmc_main.c:1188:9: warning: variable ‘firstcsr’ set but not used [-Wunused-but-set-variable]
1188 | u32 firstcsr;
This file has funky indentation, and makes little use of tabs. Keep
with this style in the patch, but that makes checkpatch unhappy.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201031181417.1081511-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Sat, 31 Oct 2020 18:04:35 +0000 (19:04 +0100)]
drivers: net: xen-netfront: Fixed W=1 set but unused warnings
drivers/net/xen-netfront.c:2416:16: warning: variable ‘target’ set but not used [-Wunused-but-set-variable]
2416 | unsigned long target;
Remove target and just discard the return value from simple_strtoul().
This patch does give a checkpatch warning, but the warning was there
before anyway, as this file has lots of checkpatch warnings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201031180435.1081127-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 2 Nov 2020 23:52:23 +0000 (15:52 -0800)]
Merge branch 'davicom-w-1-fixes'
Andrew Lunn says:
====================
davicom W=1 fixes
Fixup various W=1 warnings, and then add COMPILE_TEST support, which
explains why these where missed on the previous pass.
====================
Link: https://lore.kernel.org/r/20201031005833.1060316-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Sat, 31 Oct 2020 00:58:33 +0000 (01:58 +0100)]
drivers: net: davicom Add COMPILE_TEST support
Improve the build testing of this davicom driver by enabling it when
COMPILE_TEST is selected.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Sat, 31 Oct 2020 00:58:32 +0000 (01:58 +0100)]
drivers: net: davicom: Fixed unused but set variable with W=1
drivers/net/ethernet/davicom//dm9000.c: In function ‘dm9000_dumpblk_8bit’:
drivers/net/ethernet/davicom//dm9000.c:235:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
The driver needs to read packet data from the device even when the
packet is known bad. There is no need to assign the data to a variable
during this discard operation.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Sat, 31 Oct 2020 00:54:45 +0000 (01:54 +0100)]
drivers: net: tulip: Fix set but not used with W=1
When compiled for platforms other than __i386__ or __x86_64__:
drivers/net/ethernet/dec/tulip/tulip_core.c: In function ‘tulip_init_one’:
drivers/net/ethernet/dec/tulip/tulip_core.c:1296:13: warning: variable ‘last_irq’ set but not used [-Wunused-but-set-variable]
1296 | static int last_irq;
Add more #if defined() to totally remove the code when not needed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201031005445.1060112-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault [Fri, 30 Oct 2020 20:10:54 +0000 (21:10 +0100)]
selftests: add test script for bareudp tunnels
Test different encapsulation modes of the bareudp module:
* Unicast MPLS,
* IPv4 only,
* IPv4 in multiproto mode (that is, IPv4 and IPv6),
* IPv6.
Each mode is tested with both an IPv4 and an IPv6 underlay.
v2:
* Add build dependencies in config file (Willem de Bruijn).
* The MPLS test now uses its own IP addresses. This minimises
the amount of cleanup between tests and simplifies the script.
* Verify that iproute2 supports bareudp tunnels before running the
script (and other minor usability improvements).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/8abc0e58f8a7eeb404f82466505a73110bc43ab8.1604088587.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 2 Nov 2020 23:10:55 +0000 (15:10 -0800)]
Merge branch 'add-ast2400-2500-phy-handle-support'
Ivan Mikhaylov says:
====================
add ast2400/2500 phy-handle support
This patch introduces ast2400/2500 phy-handle support with an embedded
MDIO controller. At the current moment it is not possible to set options
with this format on ast2400/2500:
mac {
phy-handle = <&phy>;
phy-mode = "rgmii";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: ethernet-phy@0 {
compatible = "ethernet-phy-idxxxx.yyyy";
reg = <0>;
};
};
};
The patch fixes it and gets possible PHYs and register them with
of_mdiobus_register.
Changes from v3:
1. add dt-bindings description of MDIO node and phy-handle option
with example.
Changes from v2:
1. change manual phy interface type check on phy_interface_mode_is_rgmii
function.
2. add err_phy_connect label.
3. split ftgmac100_destroy_mdio into ftgmac100_phy_disconnect and
ftgmac100_destroy_mdio.
4. remove unneeded mdio_np checks.
Changes from v1:
1. split one patch into two.
====================
Link: https://lore.kernel.org/r/20201030133707.12099-1-i.mikhaylov@yadro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Mikhaylov [Fri, 30 Oct 2020 13:37:07 +0000 (16:37 +0300)]
dt-bindings: net: ftgmac100: describe phy-handle and MDIO
Add the phy-handle and MDIO description and add the example with
PHY and MDIO nodes.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Mikhaylov [Fri, 30 Oct 2020 13:37:06 +0000 (16:37 +0300)]
net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500
phy-handle can't be handled well for ast2400/2500 which has an embedded
MDIO controller. Add ftgmac100_mdio_setup for ast2400/2500 and initialize
PHYs from mdio child node with of_mdiobus_register.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Mikhaylov [Fri, 30 Oct 2020 13:37:05 +0000 (16:37 +0300)]
net: ftgmac100: move phy connect out from ftgmac100_setup_mdio
Split MDIO registration and PHY connect into ftgmac100_setup_mdio and
ftgmac100_mii_probe.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Grygorii Strashko [Thu, 29 Oct 2020 19:09:31 +0000 (21:09 +0200)]
selftests/net: timestamping: add ptp v2 support
The timestamping tool is supporting now only PTPv1 (IEEE-1588 2002) while
modern HW often supports also/only PTPv2.
Hence timestamping tool is still useful for sanity testing of PTP drivers
HW timestamping capabilities it's reasonable to upstate it to support
PTPv2. This patch adds corresponding support which can be enabled by using
new parameter "PTPV2".
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20201029190931.30883-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrew Lunn [Sat, 31 Oct 2020 18:26:55 +0000 (19:26 +0100)]
net: 9p: Fix kerneldoc warnings of missing parameters etc
net/9p/client.c:420: warning: Function parameter or member 'c' not described in 'p9_client_cb'
net/9p/client.c:420: warning: Function parameter or member 'req' not described in 'p9_client_cb'
net/9p/client.c:420: warning: Function parameter or member 'status' not described in 'p9_client_cb'
net/9p/client.c:568: warning: Function parameter or member 'uidata' not described in 'p9_check_zc_errors'
net/9p/trans_common.c:23: warning: Function parameter or member 'nr_pages' not described in 'p9_release_pages'
net/9p/trans_common.c:23: warning: Function parameter or member 'pages' not described in 'p9_release_pages'
net/9p/trans_fd.c:132: warning: Function parameter or member 'rreq' not described in 'p9_conn'
net/9p/trans_fd.c:132: warning: Function parameter or member 'wreq' not described in 'p9_conn'
net/9p/trans_fd.c:56: warning: Function parameter or member 'privport' not described in 'p9_fd_opts'
net/9p/trans_rdma.c:113: warning: Function parameter or member 'cqe' not described in 'p9_rdma_context'
net/9p/trans_rdma.c:129: warning: Function parameter or member 'privport' not described in 'p9_rdma_opts'
net/9p/trans_virtio.c:215: warning: Function parameter or member 'limit' not described in 'pack_sg_list_p'
net/9p/trans_virtio.c:83: warning: Function parameter or member 'chan_list' not described in 'virtio_chan'
net/9p/trans_virtio.c:83: warning: Function parameter or member 'p9_max_pages' not described in 'virtio_chan'
net/9p/trans_virtio.c:83: warning: Function parameter or member 'ring_bufs_avail' not described in 'virtio_chan'
net/9p/trans_virtio.c:83: warning: Function parameter or member 'tag' not described in 'virtio_chan'
net/9p/trans_virtio.c:83: warning: Function parameter or member 'vc_wq' not described in 'virtio_chan'
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
Link: https://lore.kernel.org/r/20201031182655.1082065-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Sun, 1 Nov 2020 00:08:45 +0000 (02:08 +0200)]
net: bridge: mcast: fix stub definition of br_multicast_querier_exists
The commit cited below has changed only the functional prototype of
br_multicast_querier_exists, but forgot to do that for the stub
prototype (the one where CONFIG_BRIDGE_IGMP_SNOOPING is disabled).
Fixes:
955062b03fa6 ("net: bridge: mcast: add support for raw L2 multicast groups")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201101000845.190009-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 29 Oct 2020 18:02:53 +0000 (19:02 +0100)]
r8169: use pm_runtime_put_sync in rtl_open error path
We can safely runtime-suspend the chip if rtl_open() fails. Therefore
switch the error path to use pm_runtime_put_sync() as well.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/aa093b1e-f295-5700-1cb7-954b54dd8f17@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 29 Oct 2020 17:56:06 +0000 (18:56 +0100)]
r8169: remove unneeded memory barrier in rtl_tx
tp->dirty_tx isn't changed outside rtl_tx(). Therefore I see no need
to guarantee a specific order of reading tp->dirty_tx and tp->cur_tx.
Having said that we can remove the memory barrier.
In addition use READ_ONCE() when reading tp->cur_tx because it can
change in parallel to rtl_tx().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/2264563a-fa9e-11b0-2c42-31bc6b8e2790@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Armin Wolf [Thu, 29 Oct 2020 14:33:57 +0000 (15:33 +0100)]
ne2k: Fix Typo in RW-Bugfix
Correct a typo in ne.c and ne2k-pci.c which
prevented activation of the RW-Bugfix.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20201029143357.7008-1-W_Armin@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parshuram Thombare [Thu, 29 Oct 2020 12:47:07 +0000 (13:47 +0100)]
net: macb: add support for high speed interface
This patch adds support for 10GBASE-R interface to the linux driver for
Cadence's ethernet controller.
This controller has separate MAC's and PCS'es for low and high speed paths.
High speed PCS supports 100M, 1G, 2.5G, 5G and 10G through rate adaptation
implementation. However, since it doesn't support auto negotiation, linux
driver is modified to support 10GBASE-R instead of USXGMII.
Signed-off-by: Parshuram Thombare <pthombar@cadence.com>
Link: https://lore.kernel.org/r/1603975627-18338-1-git-send-email-pthombar@cadence.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karsten Graul [Sat, 31 Oct 2020 18:19:38 +0000 (19:19 +0100)]
net/smc: improve return codes for SMC-Dv2
To allow better problem diagnosis the return codes for SMC-Dv2 are
improved by this patch. A few more CLC DECLINE codes are defined and
sent to the peer when an SMC connection cannot be established.
There are now multiple SMC variations that are offered by the client and
the server may encounter problems to initialize all of them.
Because only one diagnosis code can be sent to the client the decision
was made to send the first code that was encountered. Because the server
tries the variations in the order of importance (SMC-Dv2, SMC-D, SMC-R)
this makes sure that the diagnosis code of the most important variation
is sent.
v2: initialize rc in smc_listen_v2_check().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20201031181938.69903-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 31 Oct 2020 21:16:49 +0000 (14:16 -0700)]
Merge branch 'support-for-octeontx2-98xx-silcion'
Subbaraya Sundeep says:
====================
Support for OcteonTx2 98xx silicon
OcteonTx2 series of silicons have multiple variants, the
98xx variant has two network interface controllers (NIX blocks)
each of which supports upto 100Gbps. Similarly 98xx supports
two crypto blocks (CPT) to double the crypto performance.
The current RVU drivers support a single NIX and
CPT blocks, this patchset adds support for multiple
blocks of same type to be active at the same time.
Also the number of serdes controllers (CGX) have increased
from three to five on 98xx. Each of the CGX block supports
upto 4 physical interfaces depending on the serdes mode ie
upto 20 physical interfaces. At a time each CGX block can
be mapped to a single NIX. The HW configuration to map CGX
and NIX blocks is done by firmware.
NPC has two new interfaces added NIX1_RX and NIX1_TX
similar to NIX0 interfaces. Also MCAM entries is increased
from 4k to 16k. To support the 16k entries extended set
is added in hardware which are at completely different
register offsets. Fortunately new constant registers
can be read to figure out the extended set is present
or not.
This patch set modifies existing AF and PF drivers
in below order to support 98xx:
- Prepare for supporting multiple blocks of same type.
Functions which operate with block type to get or set
resources count are modified to operate with block address
- Manage allocating and freeing LFs from new NIX1 and CPT1 RVU blocks.
- NIX block specific initialization and teardown for NIX1
- Based on the mapping set by Firmware, assign the NIX block
LFs to a PF/VF.
- Multicast entries context is setup for NIX1 along with NIX0
- NPC changes to support extended set of MCAM entries, counters
and NIX1 interfaces to NPC.
- All the mailbox changes required for the new blocks in 98xx.
- Since there are more CGX links in 98xx the hardcoded LBK
link value needed by netdev drivers is not sufficient any
more. Hence AF consumers need to get the number of all links
and calculate the LBK link.
- Debugfs changes to display NIX1 contexts similar to NIX0
- Debugfs change to display mapping between CGX, NIX and PF.
====================
Link: https://lore.kernel.org/r/1603948549-781-1-git-send-email-sundeep.lkml@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rakesh Babu [Thu, 29 Oct 2020 05:15:49 +0000 (10:45 +0530)]
octeontx2-af: Display CGX, NIX and PF map in debugfs.
Unlike earlier silicon variants, OcteonTx2 98xx
silicon has 2 NIX blocks and each of the CGX is
mapped to either of the NIX blocks. Each NIX
block supports 100G. Mapping btw NIX blocks and
CGX is done by firmware based on CGX speed config
to have a maximum possible network bandwidth.
Since the mapping is not fixed, it's difficult
for a user to figure out. Hence added a debugfs
entry which displays mapping between CGX LMAC,
NIX block and RVU PF.
Sample result of this entry ::
~# cat /sys/kernel/debug/octeontx2/rvu_pf_cgx_map
PCI dev RVU PF Func NIX block CGX LMAC
0002:02:00.0 0x400 NIX0 CGX0 LMAC0
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rakesh Babu [Thu, 29 Oct 2020 05:15:48 +0000 (10:45 +0530)]
octeontx2-af: Display NIX1 also in debugfs
If NIX1 block is also implemented then add a new
directory for NIX1 in debugfs root. Stats of
NIX1 block can be read/writen from/to the files
in directory "/sys/kernel/debug/octeontx2/nix1/".
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep [Thu, 29 Oct 2020 05:15:47 +0000 (10:45 +0530)]
octeontx2-pf: Calculate LBK link instead of hardcoding
CGX links are followed by LBK links but number of
CGX and LBK links varies between platforms. Hence
get the number of links present in hardware from
AF and use it to calculate LBK link number.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep [Thu, 29 Oct 2020 05:15:46 +0000 (10:45 +0530)]
octeontx2-af: Mbox changes for 98xx
This patch puts together all mailbox changes
for 98xx silicon:
Attach ->
Modify resource attach mailbox handler to
request LFs from a block address out of multiple
blocks of same type. If a PF/VF need LFs from two
blocks of same type then attach mbox should be
called twice.
Example:
struct rsrc_attach *attach;
.. Allocate memory for message ..
attach->cptlfs = 3; /* 3 LFs from CPT0 */
.. Send message ..
.. Allocate memory for message ..
attach->modify = 1;
attach->cpt_blkaddr = BLKADDR_CPT1;
attach->cptlfs = 2; /* 2 LFs from CPT1 */
.. Send message ..
Detach ->
Update detach mailbox and its handler to detach
resources from CPT1 and NIX1 blocks.
MSIX ->
Updated the MSIX mailbox and its handler to return
MSIX offsets for the new block CPT1.
Free resources ->
Update free_rsrc mailbox and its handler to return
the free resources count of new blocks NIX1 and CPT1
Links ->
Number of CGX,LBK and SDP links may vary between
platforms. For example, in 98xx number of CGX and LBK
links are more than 96xx. Hence the info about number
of links present in hardware is useful for consumers to
request link configuration properly. This patch sends
this info in nix_lf_alloc_rsp.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep [Thu, 29 Oct 2020 05:15:45 +0000 (10:45 +0530)]
octeontx2-af: Add NIX1 interfaces to NPC
On 98xx silicon, NPC block has additional
mcam entries, counters and NIX1 interfaces.
Extended set of registers are present for the
new mcam entries and counters.
This patch does the following:
- updates the register accessing macros
to use extended set if present.
- configures the MKEX profile for NIX1 interfaces also.
- updates mcam entry write functions to use assigned
NIX0/1 interfaces for the PF/VF.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep [Thu, 29 Oct 2020 05:15:44 +0000 (10:45 +0530)]
octeontx2-af: Setup MCE context for assigned NIX
Initialize MCE context for the assigned NIX0/1
block for a CGX mapped PF. Modified rvu_nix_aq_enq_inst
function to work with nix_hw so that MCE contexts
for both NIX blocks can be inited.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep [Thu, 29 Oct 2020 05:15:43 +0000 (10:45 +0530)]
octeontx2-af: Map NIX block from CGX connection
Firmware configures NIX block mapping for all CGXs
to achieve maximum throughput. This patch reads
the configuration and create mapping between RVU
PF and NIX blocks. And for LBK VFs assign NIX0 for
even numbered VFs and NIX1 for odd numbered VFs.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rakesh Babu [Thu, 29 Oct 2020 05:15:42 +0000 (10:45 +0530)]
octeontx2-af: Initialize NIX1 block
This patch modifies NIX functions to operate
with nix_hw context so that existing functions
can be used for both NIX0 and NIX1 blocks. And
the NIX blocks present in the system are initialized
during driver init and freed during exit.
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rakesh Babu [Thu, 29 Oct 2020 05:15:41 +0000 (10:45 +0530)]
octeontx2-af: Manage new blocks in 98xx
AF manages the tasks of allocating, freeing
LFs from RVU blocks to PF and VFs. With new
NIX1 and CPT1 blocks in 98xx, this patch
adds support for handling new blocks too.
Co-developed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subbaraya Sundeep [Thu, 29 Oct 2020 05:15:40 +0000 (10:45 +0530)]
octeontx2-af: Update get/set resource count functions
Since multiple blocks of same type are present in
98xx, modify functions which get resource count and
which update resource count to work with individual
block address instead of block type.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Robert Hancock [Wed, 28 Oct 2020 17:14:29 +0000 (11:14 -0600)]
net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode
Update the axienet driver to properly support the Xilinx PCS/PMA PHY
component which is used for 1000BaseX and SGMII modes, including
properly configuring the auto-negotiation mode of the PHY and reading
the negotiated state from the PHY.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20201028171429.1699922-1-robert.hancock@calian.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Sat, 31 Oct 2020 15:15:24 +0000 (10:15 -0500)]
net: ipa: avoid a bogus warning
The previous commit added support for IPA having up to six source
and destination resources. But currently nothing uses more than
four. (Five of each are used in a newer version of the hardware.)
I find that in one of my build environments the compiler complains
about newly-added code in two spots. Inspection shows that the
warnings have no merit, but this compiler does not recognize that.
ipa_main.c:457:39: warning: array index 5 is past the end of the
array (which contains 4 elements) [-Warray-bounds]
(and the same warning at line 483)
We can make this warning go away by changing the number of elements
in the source and destination resource limit arrays--now rather than
waiting until we need it to support the newer hardware. This change
was coming soon anyway; make it now to get rid of the warning.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201031151524.32132-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 31 Oct 2020 17:23:03 +0000 (10:23 -0700)]
Merge branch 'net-add-functionality-to-net-core-byte-packet-counters-and-use-it-in-r8169'
Heiner Kallweit says:
====================
net: add functionality to net core byte/packet counters and use it in r8169
This series adds missing functionality to the net core handling of
byte/packet counters and statistics. The extensions are then used
to remove private rx/tx byte/packet counters in r8169 driver.
====================
Link: https://lore.kernel.org/r/1fdb8ecd-be0a-755d-1d92-c62ed8399e77@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 29 Oct 2020 17:34:39 +0000 (18:34 +0100)]
r8169: remove no longer needed private rx/tx packet/byte counters
After switching to the net core rx/tx byte/packet counters we can
remove the now unused private version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 29 Oct 2020 17:33:46 +0000 (18:33 +0100)]
r8169: use struct pcpu_sw_netstats for rx/tx packet/byte counters
Switch to the net core rx/tx byte/packet counter infrastructure.
This simplifies the code, only small drawback is some memory overhead
because we use just one queue, but allocate the counters per cpu.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 29 Oct 2020 17:31:21 +0000 (18:31 +0100)]
net: core: add devm_netdev_alloc_pcpu_stats
We have netdev_alloc_pcpu_stats(), and we have devm_alloc_percpu().
Add a managed version of netdev_alloc_pcpu_stats, e.g. for allocating
the per-cpu stats in the probe() callback of a driver. It needs to be
a macro for dealing properly with the type argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Thu, 29 Oct 2020 17:29:59 +0000 (18:29 +0100)]
net: core: add dev_sw_netstats_tx_add
Add dev_sw_netstats_tx_add(), complementing already existing
dev_sw_netstats_rx_add(). Other than dev_sw_netstats_rx_add allow to
pass the number of packets as function argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 31 Oct 2020 16:55:44 +0000 (09:55 -0700)]
Merge branch 'in_interrupt-cleanup-part-2'
Sebastian Andrzej Siewior says:
====================
in_interrupt() cleanup, part 2
in the discussion about preempt count consistency across kernel configurations:
https://lore.kernel.org/r/
20200914204209.
256266093@linutronix.de/
Linus clearly requested that code in drivers and libraries which changes
behaviour based on execution context should either be split up so that
e.g. task context invocations and BH invocations have different interfaces
or if that's not possible the context information has to be provided by the
caller which knows in which context it is executing.
This includes conditional locking, allocation mode (GFP_*) decisions and
avoidance of code paths which might sleep.
In the long run, usage of 'preemptible, in_*irq etc.' should be banned from
driver code completely.
This is part two addressing remaining drivers except for orinoco-usb.
====================
Cherry picking only Ethernet changes.
Link: https://lore.kernel.org/r/20201027225454.3492351-1-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior [Tue, 27 Oct 2020 22:54:44 +0000 (23:54 +0100)]
net: tlan: Replace in_irq() usage
The driver uses in_irq() to determine if the tlan_priv::lock has to be
acquired in tlan_mii_read_reg() and tlan_mii_write_reg().
The interrupt handler acquires the lock outside of these functions so the
in_irq() check is meant to prevent a lock recursion deadlock. But this
check is incorrect when interrupt force threading is enabled because then
the handler runs in thread context and in_irq() correctly returns false.
The usage of in_*() in drivers is phased out and Linus clearly requested
that code which changes behaviour depending on context should either be
seperated or the context be conveyed in an argument passed by the caller,
which usually knows the context.
tlan_set_timer() has this conditional as well, but this function is only
invoked from task context or the timer callback itself. So it always has to
lock and the check can be removed.
tlan_mii_read_reg(), tlan_mii_write_reg() and tlan_phy_print() are invoked
from interrupt and other contexts.
Split out the actual function body into helper variants which are called
from interrupt context and make the original functions wrappers which
acquire tlan_priv::lock unconditionally.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Samuel Chessman <chessman@tux.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior [Tue, 27 Oct 2020 22:54:42 +0000 (23:54 +0100)]
net: forcedeth: Replace context and lock check with a lockdep_assert()
nv_update_stats() triggers a WARN_ON() when invoked from hard interrupt
context because the locks in use are not hard interrupt safe. It also has
an assert_spin_locked() which was the lock check before the lockdep era.
Lockdep has way broader locking correctness checks and covers both issues,
so replace the warning and the lock assert with lockdep_assert_held().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Rain River <rain.1986.08.12@gmail.com>
Cc: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior [Tue, 27 Oct 2020 22:54:41 +0000 (23:54 +0100)]
net: neterion: s2io: Replace in_interrupt() for context detection
wait_for_cmd_complete() uses in_interrupt() to detect whether it is safe to
sleep or not.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be seperated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
in_interrupt() also is only partially correct because it fails to chose the
correct code path when just preemption or interrupts are disabled.
Add an argument 'may_block' to both functions and adjust the callers to
pass the context information.
The following call chains which end up invoking wait_for_cmd_complete()
were analyzed to be safe to sleep:
s2io_card_up()
s2io_set_multicast()
init_nic()
init_tti()
s2io_close()
do_s2io_delete_unicast_mc()
do_s2io_add_mac()
s2io_set_mac_addr()
do_s2io_prog_unicast()
do_s2io_add_mac()
s2io_reset()
do_s2io_restore_unicast_mc()
do_s2io_add_mc()
do_s2io_add_mac()
s2io_open()
do_s2io_prog_unicast()
do_s2io_add_mac()
The following call chains which end up invoking wait_for_cmd_complete()
were analyzed to be safe to sleep:
__dev_set_rx_mode()
s2io_set_multicast()
s2io_txpic_intr_handle()
s2io_link()
init_tti()
Add a may_sleep argument to wait_for_cmd_complete(), s2io_set_multicast()
and init_tti() and hand the context information in from the call sites.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 31 Oct 2020 01:26:01 +0000 (18:26 -0700)]
Merge branch 'l2-multicast-forwarding-for-ocelot-switch'
Vladimir Oltean says:
====================
L2 multicast forwarding for Ocelot switch
This series enables the mscc_ocelot switch to forward raw L2 (non-IP)
mdb entries as configured by the bridge driver after this patch:
https://patchwork.ozlabs.org/project/netdev/patch/
20201028233831.610076-1-vladimir.oltean@nxp.com/
====================
Link: https://lore.kernel.org/r/20201029022738.722794-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 29 Oct 2020 02:27:38 +0000 (04:27 +0200)]
net: mscc: ocelot: support L2 multicast entries
There is one main difference in mscc_ocelot between IP multicast and L2
multicast. With IP multicast, destination ports are encoded into the
upper bytes of the multicast MAC address. Example: to deliver the
address 01:00:5E:11:22:33 to ports 3, 8, and 9, one would need to
program the address of 00:03:08:11:22:33 into hardware. Whereas for L2
multicast, the MAC table entry points to a Port Group ID (PGID), and
that PGID contains the port mask that the packet will be forwarded to.
As to why it is this way, no clue. My guess is that not all port
combinations can be supported simultaneously with the limited number of
PGIDs, and this was somehow an issue for IP multicast but not for L2
multicast. Anyway.
Prior to this change, the raw L2 multicast code was bogus, due to the
fact that there wasn't really any way to test it using the bridge code.
There were 2 issues:
- A multicast PGID was allocated for each MDB entry, but it wasn't in
fact programmed to hardware. It was dummy.
- In fact we don't want to reserve a multicast PGID for every single MDB
entry. That would be odd because we can only have ~60 PGIDs, but
thousands of MDB entries. So instead, we want to reserve a multicast
PGID for every single port combination for multicast traffic. And
since we can have 2 (or more) MDB entries delivered to the same port
group (and therefore PGID), we need to reference-count the PGIDs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 29 Oct 2020 02:27:37 +0000 (04:27 +0200)]
net: mscc: ocelot: make entry_type a member of struct ocelot_multicast
This saves a re-classification of the MDB address on deletion.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 29 Oct 2020 02:27:36 +0000 (04:27 +0200)]
net: mscc: ocelot: remove the "new" variable in ocelot_port_mdb_add
It is Not Needed, a comment will suffice.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 29 Oct 2020 02:27:35 +0000 (04:27 +0200)]
net: mscc: ocelot: use ether_addr_copy
Since a helper is available for copying Ethernet addresses, let's use it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Thu, 29 Oct 2020 02:27:34 +0000 (04:27 +0200)]
net: mscc: ocelot: classify L2 mdb entries as LOCKED
ocelot.h says:
/* MAC table entry types.
* ENTRYTYPE_NORMAL is subject to aging.
* ENTRYTYPE_LOCKED is not subject to aging.
* ENTRYTYPE_MACv4 is not subject to aging. For IPv4 multicast.
* ENTRYTYPE_MACv6 is not subject to aging. For IPv6 multicast.
*/
We don't want the permanent entries added with 'bridge mdb' to be
subject to aging.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 28 Oct 2020 23:48:15 +0000 (01:48 +0200)]
net: bridge: explicitly convert between mdb entry state and port group flags
When creating a new multicast port group, there is implicit conversion
between the __u8 state member of struct br_mdb_entry and the unsigned
char flags member of struct net_bridge_port_group. This implicit
conversion relies on the fact that MDB_PERMANENT is equal to
MDB_PG_FLAGS_PERMANENT.
Let's be more explicit and convert the state to flags manually.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201028234815.613226-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Wed, 28 Oct 2020 23:38:31 +0000 (01:38 +0200)]
net: bridge: mcast: add support for raw L2 multicast groups
Extend the bridge multicast control and data path to configure routes
for L2 (non-IP) multicast groups.
The uapi struct br_mdb_entry union u is extended with another variant,
mac_addr, which does not change the structure size, and which is valid
when the proto field is zero.
To be compatible with the forwarding code that is already in place,
which acts as an IGMP/MLD snooping bridge with querier capabilities, we
need to declare that for L2 MDB entries (for which there exists no such
thing as IGMP/MLD snooping/querying), that there is always a querier.
Otherwise, these entries would be flooded to all bridge ports and not
just to those that are members of the L2 multicast group.
Needless to say, only permanent L2 multicast groups can be installed on
a bridge port.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201028233831.610076-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>