OSDN Git Service
Lukas Straub [Fri, 22 May 2020 07:53:51 +0000 (15:53 +0800)]
net/colo-compare.c: Create event_bh with the right AioContext
qemu_bh_new will set the bh to be executed in the main
loop. This causes crashes as colo_compare_handle_event assumes
that it has exclusive access the queues, which are also
concurrently accessed in the iothread.
Create the bh with the AioContext of the iothread to fulfill
these assumptions and fix the crashes. This is safe, because
the bh already takes the appropriate locks.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Derek Su <dereksu@qnap.com>
Tested-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Jason Wang [Mon, 11 May 2020 04:04:53 +0000 (12:04 +0800)]
net: use peer when purging queue in qemu_flush_or_purge_queue_packets()
The sender of packet will be checked in the qemu_net_queue_purge() but
we use NetClientState not its peer when trying to purge the incoming
queue in qemu_flush_or_purge_packets(). This will trigger the assert
in virtio_net_reset since we can't pass the sender check:
hw/net/virtio-net.c:533: void virtio_net_reset(VirtIODevice *): Assertion
`!virtio_net_get_subqueue(nc)->async_tx.elem' failed.
#9 0x55a33fa31b78 in virtio_net_reset hw/net/virtio-net.c:533:13
#10 0x55a33fc88412 in virtio_reset hw/virtio/virtio.c:1919:9
#11 0x55a341d82764 in virtio_bus_reset hw/virtio/virtio-bus.c:95:9
#12 0x55a341dba2de in virtio_pci_reset hw/virtio/virtio-pci.c:1824:5
#13 0x55a341db3e02 in virtio_pci_common_write hw/virtio/virtio-pci.c:1252:13
#14 0x55a33f62117b in memory_region_write_accessor memory.c:496:5
#15 0x55a33f6205e4 in access_with_adjusted_size memory.c:557:18
#16 0x55a33f61e177 in memory_region_dispatch_write memory.c:1488:16
Reproducer:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg701914.html
Fix by using the peer.
Reported-by: "Alexander Bulekov" <alxndr@bu.edu>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Fixes:
ca77d85e1dbf9 ("net: complete all queued packets on VM stop")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tong Ho [Tue, 12 May 2020 14:54:54 +0000 (20:24 +0530)]
net: cadence_gem: Fix RX address filtering
Two defects are fixed:
1/ Detection of multicast frames
2/ Treating drop of mis-addressed frames as non-error
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:53 +0000 (20:24 +0530)]
net: cadence_gem: TX_LAST bit should be set by guest
TX_LAST bit should not be set by hardware, its set by guest to inform
the last bd of the frame.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:52 +0000 (20:24 +0530)]
net: cadence_gem: Update the reset value for interrupt mask register
Mask all interrupt on reset.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:51 +0000 (20:24 +0530)]
net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 reg
Advertise support of clear-on-read for ISR registers.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:50 +0000 (20:24 +0530)]
net: cadence_gem: Add support for jumbo frames
Add a property "jumbo-max-len", which sets default value of jumbo frames
up to 16,383 bytes. Add Frame length checks for standard and jumbo
frames.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:49 +0000 (20:24 +0530)]
net: cadence_gem: Fix up code style
Fix the code style for register definitions.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:48 +0000 (20:24 +0530)]
net: cadence_gem: Move tx/rx packet buffert to CadenceGEMState
Moving this buffers to CadenceGEMState, as their size will be increased
more when JUMBO frames support is added.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:47 +0000 (20:24 +0530)]
net: cadence_gem: Set ISR according to queue in use
Set ISR according to queue in use, added interrupt support for
all queues.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:46 +0000 (20:24 +0530)]
net: cadence_gem: Define access permission for interrupt registers
Q1 to Q7 ISR's are clear-on-read, IER/IDR registers
are write-only, mask reg are read-only.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:45 +0000 (20:24 +0530)]
net: cadence_gem: Fix irq update w.r.t queue
Set irq's specific to a queue, present implementation is setting q1 irq
based on q0 status.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:44 +0000 (20:24 +0530)]
net: cadence_gem: Fix the queue address update during wrap around
During wrap around and reset, queues are pointing to initial base
address of queue 0, irrespective of what queue we are dealing with.
Fix it by assigning proper base address every time.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Sai Pavan Boddu [Tue, 12 May 2020 14:54:43 +0000 (20:24 +0530)]
net: cadence_gem: Fix debug statements
Enabling debug breaks the build, Fix them and make debug statements
always compilable. Fix few statements to use sized integer casting.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Philippe Mathieu-Daudé [Thu, 23 Apr 2020 23:16:43 +0000 (01:16 +0200)]
hw/net/tulip: Log descriptor overflows
Log with GUEST_ERROR what the guest is doing wrong.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Philippe Mathieu-Daudé [Thu, 23 Apr 2020 23:16:42 +0000 (01:16 +0200)]
hw/net/tulip: Fix 'Descriptor Error' definition
Bit #14 is "DE" for 'Descriptor Error':
When set, indicates a frame truncation caused by a frame
that does not fit within the current descriptor buffers,
and that the 21143 does not own the next descriptor.
[Table 4-1. RDES0 Bit Fields Description]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Helge Deller [Sun, 26 Apr 2020 10:55:39 +0000 (12:55 +0200)]
Fix tulip breakage
The tulip network driver in a qemu-system-hppa emulation is broken in
the sense that bigger network packages aren't received any longer and
thus even running e.g. "apt update" inside the VM fails.
The breakage was introduced by commit
8ffb7265af ("check frame size and
r/w data length") which added checks to prevent accesses outside of the
rx/tx buffers.
But the new checks were implemented wrong. The variable rx_frame_len
counts backwards, from rx_frame_size down to zero, and the variable len
is never bigger than rx_frame_len, so accesses just can't happen and the
checks are unnecessary.
On the contrary the checks now prevented bigger packages to be moved
into the rx buffers.
This patch reverts the wrong checks and were sucessfully tested with a
qemu-system-hppa emulation.
Fixes:
8ffb7265af ("check frame size and r/w data length")
Buglink: https://bugs.launchpad.net/bugs/1874539
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:34 +0000 (15:59 +0300)]
virtio-net: align RSC fields with updated virtio-net header
Removal of duplicated RSC definitions. Changing names of the
fields to ones defined in the Linux header.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:33 +0000 (15:59 +0300)]
virtio-net: add migration support for RSS and hash report
Save and restore RSS/hash report configuration.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:32 +0000 (15:59 +0300)]
vmstate.h: provide VMSTATE_VARRAY_UINT16_ALLOC macro
Similar to VMSTATE_VARRAY_UINT32_ALLOC, but the size is
16-bit field.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:31 +0000 (15:59 +0300)]
virtio-net: reference implementation of hash report
Suggest VIRTIO_NET_F_HASH_REPORT if specified in device
parameters.
If the VIRTIO_NET_F_HASH_REPORT is set,
the device extends configuration space. If the feature
is negotiated, the packet layout is extended to
accomodate the hash information. In this case deliver
packet's hash value and report type in virtio header
extension.
Use for configuration the same procedure as already
used for RSS. We add two fields in rss_data that
controls what the device does with the calculated hash
if rss_data.enabled is set. If field 'populate' is set
the hash is set in the packet, if field 'redirect' is
set the hash is used to decide the queue to place the
packet to.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:30 +0000 (15:59 +0300)]
tap: allow extended virtio header with hash info
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:29 +0000 (15:59 +0300)]
virtio-net: implement RX RSS processing
If VIRTIO_NET_F_RSS negotiated and RSS is enabled, process
incoming packets, calculate packet's hash and place the
packet into respective RX virtqueue.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Yuri Benditovich [Fri, 8 May 2020 12:59:28 +0000 (15:59 +0300)]
virtio-net: implement RSS configuration command
Optionally report RSS feature.
Handle RSS configuration command and keep RSS parameters
in virtio-net device context.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Peter Maydell [Thu, 18 Jun 2020 10:23:15 +0000 (11:23 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/microvm-
20200617-pull-request' into staging
microvm: memory config tweaks
# gpg: Signature made Wed 17 Jun 2020 13:28:44 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/microvm-
20200617-pull-request:
microvm: move virtio base to 0xfeb00000
x86: move max-ram-below-4g to pc
microvm: drop max-ram-below-4g support
microvm: use 3G split unconditionally
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 17 Jun 2020 20:13:08 +0000 (13:13 -0700)]
configure: Add -Wno-psabi
On aarch64, gcc 9.3 is generating
qemu/exec.c: In function ‘address_space_translate_iommu’:
qemu/exec.c:431:28: note: parameter passing for argument of type \
‘MemTxAttrs’ {aka ‘struct MemTxAttrs’} changed in GCC 9.1
and many other repetitions. This structure, and the functions
amongst which it is passed, are not part of a QEMU public API.
Therefore we do not care how the compiler passes the argument,
so long as the compiler is self-consistent.
The only portion of QEMU which does have a public api, and so
must have a stable abi, is "qemu/plugin.h". We test this by
forcing -Wpsabi in tests/plugin/Makefile.
Buglink: https://bugs.launchpad.net/qemu/+bug/1881552
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200617201309.
1640952-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 17 Jun 2020 20:13:07 +0000 (13:13 -0700)]
configure: Disable -Wtautological-type-limit-compare
Clang 10 enables this by default with -Wtype-limit.
All of the instances flagged by this Werror so far have been
cases in which we really do want the compiler to optimize away
the test completely. Disabling the warning will avoid having
to add ifdefs to work around this.
Cc: Eric Blake <eblake@redhat.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1878628
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200617201309.
1640952-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Wed, 17 Jun 2020 20:13:06 +0000 (13:13 -0700)]
configure: Clean up warning flag lists
Use a helper function to tidy the assembly of gcc_flags.
Separate flags that disable warnings from those that enable,
and sort the disable warnings to the end.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200617201309.
1640952-4-richard.henderson@linaro.org
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wei Wang [Wed, 17 Jun 2020 20:13:05 +0000 (13:13 -0700)]
migration: fix xbzrle encoding rate calculation
It's reported an error of implicit conversion from "unsigned long" to
"double" when compiling with Clang 10. Simply make the encoding rate 0
when the encoded_size is 0.
Fixes:
e460a4b1a4
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200617201309.
1640952-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Philippe Mathieu-Daudé [Wed, 17 Jun 2020 20:13:04 +0000 (13:13 -0700)]
fpu/softfloat: Silence 'bitwise negation of boolean expression' warning
When building with clang version 10.0.0-4ubuntu1, we get:
CC lm32-softmmu/fpu/softfloat.o
fpu/softfloat.c:3365:13: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
absZ &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fpu/softfloat.c:3423:18: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
absZ0 &= ~ ( ( (uint64_t) ( absZ1<<1 ) == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
fpu/softfloat.c:4273:18: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
zSig1 &= ~ ( ( zSig2 + zSig2 == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix by rewriting the fishy bitwise AND of two bools as an int.
Suggested-by: Eric Blake <eblake@redhat.com>
Buglink: https://bugs.launchpad.net/bugs/1881004
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20200617201309.
1640952-2-richard.henderson@linaro.org
Message-Id: <
20200528155420.9802-1-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 17 Jun 2020 15:24:24 +0000 (16:24 +0100)]
Merge remote-tracking branch 'remotes/kraxel/tags/usb-
20200617-pull-request' into staging
usb-host: add hostdevice property, workaround libusb bug
# gpg: Signature made Wed 17 Jun 2020 11:47:37 BST
# gpg: using RSA key
4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/usb-
20200617-pull-request:
usb-host: workaround libusb bug
usb: add hostdevice property to usb-host
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Fri, 29 May 2020 07:39:57 +0000 (09:39 +0200)]
microvm: move virtio base to 0xfeb00000
Place virtio-mmio devices near the other mmio regions,
next ioapic is at @ 0xfec00000.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id:
20200529073957.8018-5-kraxel@redhat.com
Gerd Hoffmann [Fri, 29 May 2020 07:39:56 +0000 (09:39 +0200)]
x86: move max-ram-below-4g to pc
Move from X86MachineClass to PCMachineClass so it disappears
from microvm machine type property list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-id:
20200529073957.8018-4-kraxel@redhat.com
Gerd Hoffmann [Fri, 29 May 2020 07:39:55 +0000 (09:39 +0200)]
microvm: drop max-ram-below-4g support
Not useful for microvm and allows users to shoot themself
into the foot (make ram + mmio overlap).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200529073957.8018-3-kraxel@redhat.com
Gerd Hoffmann [Fri, 29 May 2020 07:39:54 +0000 (09:39 +0200)]
microvm: use 3G split unconditionally
Looks like the logic was copied over from q35.
q35 does this for backward compatibility, there is no reason to do this
on microvm though. Also microvm doesn't need much mmio space, 1G is
more than enough. Using an mmio window smaller than 1G is bad for
gigabyte alignment and hugepages though. So split @ 3G unconditionally.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id:
20200529073957.8018-2-kraxel@redhat.com
Gerd Hoffmann [Fri, 29 May 2020 07:22:24 +0000 (09:22 +0200)]
usb-host: workaround libusb bug
libusb seems to no allways call the completion callback for requests
canceled (which it is supposed to do according to the docs). So add
a limit to avoid qemu waiting forever.
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20200529072225.3195-1-kraxel@redhat.com>
Gerd Hoffmann [Fri, 5 Jun 2020 12:59:52 +0000 (14:59 +0200)]
usb: add hostdevice property to usb-host
The new property allows to specify usb host device name. Uses standard
qemu_open(), so both file system path (/dev/bus/usb/$bus/$dev on linux)
and file descriptor passing can be used.
Requires libusb 1.0.23 or newer. The hostdevice property is only
present in case qemu is compiled against a new enough library version,
so the presence of the property can be used for feature detection.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20200605125952.13113-1-kraxel@redhat.com>
Peter Maydell [Tue, 16 Jun 2020 13:57:15 +0000 (14:57 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-160620-2' into staging
Testing and plugin updates
- clear up dtc warnings
- add support for --enable-tsan builds
- re-enable shippable cross builds
- serialise cirrus check steps
- fix check-tcg plugin issues
- add lockstep plugin
# gpg: Signature made Tue 16 Jun 2020 14:50:09 BST
# gpg: using RSA key
6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-plugin-160620-2: (21 commits)
plugins: new lockstep plugin for debugging TCG changes
tests/tcg: ensure -cpu max also used for plugin run
tests/tcg: build plugin list from contents of src directory
cirrus.yml: serialise make check
Revert ".shippable: temporaily disable some cross builds"
tests: Disable select tests under TSan, which hit TSan issue.
docs: Added details on TSan to testing.rst
util: Added tsan annotate for thread name.
include/qemu: Added tsan.h for annotations.
tests/docker: Added docker build support for TSan.
thread: add tsan annotations to QemuSpin
translate-all: call qemu_spin_destroy for PageDesc
tcg: call qemu_spin_destroy for tb->jmp_lock
qht: call qemu_spin_destroy for head buckets
cputlb: destroy CPUTLB with tlb_destroy
thread: add qemu_spin_destroy
cpu: convert queued work to a QSIMPLEQ
configure: add --enable-tsan flag + fiber annotations for coroutine-ucontext
Makefile: remove old compatibility gunks
Makefile: dtc: update, build the libfdt target
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Wed, 10 Jun 2020 15:55:05 +0000 (16:55 +0100)]
plugins: new lockstep plugin for debugging TCG changes
When we make changes to the TCG we sometimes cause regressions that
are deep into the execution cycle of the guest. Debugging this often
requires comparing large volumes of trace information to figure out
where behaviour has diverged.
The lockstep plugin utilises a shared socket so two QEMU's running
with the plugin will write their current execution position and wait
to receive the position of their partner process. When execution
diverges the plugins output where they were and the previous few
blocks before unloading themselves and letting execution continue.
Originally I planned for this to be most useful with -icount but it
turns out you can get divergence pretty quickly due to asynchronous
qemu_cpu_kick_rr_cpus() events causing one side to eventually run into
a short block a few cycles before the other side. For this reason I've
added a bit of tracking and I think the divergence reporting could be
finessed to report only if we really start to diverge in execution.
An example run would be:
qemu-system-sparc -monitor none -parallel none -net none \
-M SS-20 -m 256 -kernel day11/zImage.elf \
-plugin ./tests/plugin/liblockstep.so,arg=lockstep-sparc.sock \
-d plugin,nochain
with an identical command in another window in the same working
directory.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Tested-by: Robert Foley <robert.foley@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20200610155509.12850-3-alex.bennee@linaro.org>
Alex Bennée [Mon, 15 Jun 2020 14:19:22 +0000 (15:19 +0100)]
tests/tcg: ensure -cpu max also used for plugin run
The check-tcg plugins build was failing because some special case
tests that needed -cpu max failed because the plugin variant hadn't
carried across the QEMU_OPTS tweak.
Guests which globally set QEMU_OPTS=-cpu FOO where unaffected.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200615141922.18829-3-alex.bennee@linaro.org>
Alex Bennée [Mon, 15 Jun 2020 14:19:21 +0000 (15:19 +0100)]
tests/tcg: build plugin list from contents of src directory
If you jump back and forth between branches while developing plugins
you end up debugging failures caused by plugins left in the build
directory. Fix this by basing plugins on the source tree instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200615141922.18829-2-alex.bennee@linaro.org>
Alex Bennée [Fri, 12 Jun 2020 19:02:37 +0000 (20:02 +0100)]
cirrus.yml: serialise make check
We do this on our other platforms to make it easier to see what has
broken.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Li-Wen Hsu <lwhsu@FreeBSD.org>
Message-Id: <
20200612190237.30436-19-alex.bennee@linaro.org>
Alex Bennée [Fri, 12 Jun 2020 19:02:36 +0000 (20:02 +0100)]
Revert ".shippable: temporaily disable some cross builds"
This reverts commit
12d43b5ae916809aad9ccf8aa2a0a06260527340.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200612190237.30436-18-alex.bennee@linaro.org>
Robert Foley [Fri, 12 Jun 2020 19:02:35 +0000 (20:02 +0100)]
tests: Disable select tests under TSan, which hit TSan issue.
Disable a few tests under CONFIG_TSAN, which
run into a known TSan issue that results in a hang.
https://github.com/google/sanitizers/issues/1116
The disabled tests under TSan include all the qtests as well as
the test-char, test-qga, and test-qdev-global-props.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-14-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-17-alex.bennee@linaro.org>
Robert Foley [Fri, 12 Jun 2020 19:02:34 +0000 (20:02 +0100)]
docs: Added details on TSan to testing.rst
Adds TSan details to testing.rst.
This includes background and reference details on TSan,
and details on how to build and test with TSan
both with and without docker.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-13-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-16-alex.bennee@linaro.org>
Robert Foley [Fri, 12 Jun 2020 19:02:33 +0000 (20:02 +0100)]
util: Added tsan annotate for thread name.
This allows us to see the name of the thread in tsan
warning reports such as this:
Thread T7 'CPU 1/TCG' (tid=24317, running) created by main thread at:
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-12-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-15-alex.bennee@linaro.org>
Robert Foley [Fri, 12 Jun 2020 19:02:32 +0000 (20:02 +0100)]
include/qemu: Added tsan.h for annotations.
These annotations will allow us to give tsan
additional hints. For example, we can inform
tsan about reads/writes to ignore to silence certain
classes of warnings.
We can also annotate threads so that the proper thread
naming shows up in tsan warning results.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-11-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-14-alex.bennee@linaro.org>
Robert Foley [Fri, 12 Jun 2020 19:02:31 +0000 (20:02 +0100)]
tests/docker: Added docker build support for TSan.
Added a new docker for ubuntu 20.04.
This docker has support for Thread Sanitizer
including one patch we need in one of the header files.
https://github.com/llvm/llvm-project/commit/
a72dc86cd
This command will build with tsan enabled:
make docker-test-tsan-ubuntu2004 V=1
Also added the TSAN suppresion file to disable certain
cases of TSAN warnings.
Cc: Fam Zheng <fam@euphon.net>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-10-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-13-alex.bennee@linaro.org>
Emilio G. Cota [Fri, 12 Jun 2020 19:02:30 +0000 (20:02 +0100)]
thread: add tsan annotations to QemuSpin
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-9-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-12-alex.bennee@linaro.org>
Emilio G. Cota [Fri, 12 Jun 2020 19:02:29 +0000 (20:02 +0100)]
translate-all: call qemu_spin_destroy for PageDesc
The radix tree is append-only, but we can fail to insert
a PageDesc if the insertion races with another thread.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-8-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-11-alex.bennee@linaro.org>
Emilio G. Cota [Fri, 12 Jun 2020 19:02:28 +0000 (20:02 +0100)]
tcg: call qemu_spin_destroy for tb->jmp_lock
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[RF: minor changes + remove tb_destroy_func]
Message-Id: <
20200609200738.445-7-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-10-alex.bennee@linaro.org>
Emilio G. Cota [Fri, 12 Jun 2020 19:02:27 +0000 (20:02 +0100)]
qht: call qemu_spin_destroy for head buckets
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: add implied cota s-o-b c.f. github.com/cota/qemu/tree/tsan @
1bd1209]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-6-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-9-alex.bennee@linaro.org>
Emilio G. Cota [Fri, 12 Jun 2020 19:02:26 +0000 (20:02 +0100)]
cputlb: destroy CPUTLB with tlb_destroy
I was after adding qemu_spin_destroy calls, but while at
it I noticed that we are leaking some memory.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-5-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-8-alex.bennee@linaro.org>
Emilio G. Cota [Fri, 12 Jun 2020 19:02:25 +0000 (20:02 +0100)]
thread: add qemu_spin_destroy
It will be used for TSAN annotations.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-4-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-7-alex.bennee@linaro.org>
Emilio G. Cota [Fri, 12 Jun 2020 19:02:24 +0000 (20:02 +0100)]
cpu: convert queued work to a QSIMPLEQ
We convert queued work to a QSIMPLEQ, instead of
open-coding it.
While at it, make sure that all accesses to the list are
performed while holding the list's lock.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-3-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-6-alex.bennee@linaro.org>
Lingfeng Yang [Fri, 12 Jun 2020 19:02:23 +0000 (20:02 +0100)]
configure: add --enable-tsan flag + fiber annotations for coroutine-ucontext
We tried running QEMU under tsan in 2016, but tsan's lack of support for
longjmp-based fibers was a blocker:
https://groups.google.com/forum/#!topic/thread-sanitizer/se0YuzfWazw
Fortunately, thread sanitizer gained fiber support in early 2019:
https://reviews.llvm.org/D54889
This patch brings tsan support upstream by importing the patch that annotated
QEMU's coroutines as tsan fibers in Android's QEMU fork:
https://android-review.googlesource.com/c/platform/external/qemu/+/844675
Tested with '--enable-tsan --cc=clang-9 --cxx=clang++-9 --disable-werror'
configure flags.
Signed-off-by: Lingfeng Yang <lfy@google.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[cota: minor modifications + configure changes]
Signed-off-by: Robert Foley <robert.foley@linaro.org>
[RF: configure changes, coroutine fix + minor modifications]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200609200738.445-2-robert.foley@linaro.org>
Message-Id: <
20200612190237.30436-5-alex.bennee@linaro.org>
Claudio Fontana [Fri, 12 Jun 2020 19:02:22 +0000 (20:02 +0100)]
Makefile: remove old compatibility gunks
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200518160319.18861-3-cfontana@suse.de>
Message-Id: <
20200612190237.30436-4-alex.bennee@linaro.org>
Claudio Fontana [Fri, 12 Jun 2020 19:02:21 +0000 (20:02 +0100)]
Makefile: dtc: update, build the libfdt target
dtc submodule update, now call the libfdt target from the new
dtc Makefile, which has been changed to not require bison, flex, etc.
This removes warnings during the build.
scripts/ symlink and tests directory creation are not necessary,
and neither is calling the clean rule explicitly.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <
20200518160319.18861-2-cfontana@suse.de>
Message-Id: <
20200612190237.30436-3-alex.bennee@linaro.org>
Alex Bennée [Fri, 12 Jun 2020 19:02:20 +0000 (20:02 +0100)]
tests/docker: bump fedora to 32
We should be keeping this up to date as Fedora goes out of support
quite quickly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20200612190237.30436-2-alex.bennee@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 12:36:31 +0000 (13:36 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20200616' into staging
* hw: arm: Set vendor property for IMX SDHCI emulations
* sd: sdhci: Implement basic vendor specific register support
* hw/net/imx_fec: Convert debug fprintf() to trace events
* target/arm/cpu: adjust virtual time for all KVM arm cpus
* Implement configurable descriptor size in ftgmac100
* hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
* target/arm: More Neon decodetree conversion work
# gpg: Signature made Tue 16 Jun 2020 10:56:10 BST
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20200616: (23 commits)
hw: arm: Set vendor property for IMX SDHCI emulations
sd: sdhci: Implement basic vendor specific register support
hw/net/imx_fec: Convert debug fprintf() to trace events
target/arm/cpu: adjust virtual time for all KVM arm cpus
Implement configurable descriptor size in ftgmac100
hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
target/arm: Convert Neon VDUP (scalar) to decodetree
target/arm: Convert Neon VTBL, VTBX to decodetree
target/arm: Convert Neon VEXT to decodetree
target/arm: Convert Neon 2-reg-scalar long multiplies to decodetree
target/arm: Convert Neon 2-reg-scalar VQRDMLAH, VQRDMLSH to decodetree
target/arm: Convert Neon 2-reg-scalar VQDMULH, VQRDMULH to decodetree
target/arm: Convert Neon 2-reg-scalar float multiplies to decodetree
target/arm: Convert Neon 2-reg-scalar integer multiplies to decodetree
target/arm: Add missing TCG temp free in do_2shift_env_64()
target/arm: Add 'static' and 'const' annotations to VSHLL function arrays
target/arm: Convert Neon 3-reg-diff polynomial VMULL
target/arm: Convert Neon 3-reg-diff saturating doubling multiplies
target/arm: Convert Neon 3-reg-diff long multiplies
target/arm: Convert Neon 3-reg-diff VABAL, VABDL to decodetree
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/fsl-imx25.c
# hw/arm/fsl-imx6.c
# hw/arm/fsl-imx6ul.c
# hw/arm/fsl-imx7.c
Peter Maydell [Tue, 16 Jun 2020 10:48:22 +0000 (11:48 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging
QOM patches for 2020-06-15
# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key
354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qom-2020-06-15: (84 commits)
MAINTAINERS: Make section QOM cover hw/core/*bus.c as well
qdev: qdev_init_nofail() is now unused, drop
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
qdev: Use qdev_realize() in qdev_device_add()
qdev: Make qdev_realize() support bus-less devices
s390x/event-facility: Simplify creation of SCLP event devices
microbit: Eliminate two local variables in microbit_init()
sysbus: sysbus_init_child_obj() is now unused, drop
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 4
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
qdev: Drop qdev_realize() support for null bus
sysbus: Convert to sysbus_realize() etc. with Coccinelle
sysbus: New sysbus_realize(), sysbus_realize_and_unref()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2
hw/arm/armsse: Pass correct child size to sysbus_init_child_obj()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1
microbit: Tidy up sysbus_init_child_obj() @child argument
sysbus: Drop useless OBJECT() in sysbus_init_child_obj() calls
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 10:00:28 +0000 (11:00 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-15-2020' into staging
MIPS + misc queue for June 15th, 2020
# gpg: Signature made Mon 15 Jun 2020 20:05:25 BST
# gpg: using RSA key
D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full]
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jun-15-2020:
translations: Add Swedish language
MAINTAINERS: Adjust sh4 maintainership
target/mips: msa: Split helpers for MULV.<B|H|W|D>
target/mips: msa: Split helpers for SUBV.<B|H|W|D>
target/mips: msa: Split helpers for SUBSUU_S.<B|H|W|D>
target/mips: msa: Split helpers for SUBSUS_U.<B|H|W|D>
target/mips: msa: Split helpers for SUBS_U.<B|H|W|D>
target/mips: msa: Split helpers for SUBS_S.<B|H|W|D>
target/mips: msa: Split helpers for DOTP_U.<H|W|D>
target/mips: msa: Split helpers for DOTP_S.<H|W|D>
target/mips: msa: Split helpers for DPSUB_U.<H|W|D>
target/mips: msa: Split helpers for DPSUB_S.<H|W|D>
target/mips: msa: Split helpers for DPADD_U.<H|W|D>
target/mips: msa: Split helpers for DPADD_S.<H|W|D>
target/mips: msa: Split helpers for MSUBV.<B|H|W|D>
target/mips: msa: Split helpers for MADDV.<B|H|W|D>
target/mips: Add comments for vendor-specific ASEs
target/mips: Legalize Loongson insn flags
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guenter Roeck [Tue, 16 Jun 2020 09:32:29 +0000 (10:32 +0100)]
hw: arm: Set vendor property for IMX SDHCI emulations
Set vendor property to IMX to enable IMX specific functionality
in sdhci code.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id:
20200603145258.195920-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guenter Roeck [Tue, 16 Jun 2020 09:32:29 +0000 (10:32 +0100)]
sd: sdhci: Implement basic vendor specific register support
The Linux kernel's IMX code now uses vendor specific commands.
This results in endless warnings when booting the Linux kernel.
sdhci-esdhc-imx
2194000.usdhc: esdhc_wait_for_card_clock_gate_off:
card clock still not gate off in 100us!.
Implement support for the vendor specific command implemented in IMX hardware
to be able to avoid this warning.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id:
20200603145258.195920-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Tue, 16 Jun 2020 09:32:29 +0000 (10:32 +0100)]
hw/net/imx_fec: Convert debug fprintf() to trace events
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Fixed 32-bit format string using PRIx32/PRIx64]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fangying [Tue, 16 Jun 2020 09:32:29 +0000 (10:32 +0100)]
target/arm/cpu: adjust virtual time for all KVM arm cpus
Virtual time adjustment was implemented for virt-5.0 machine type,
but the cpu property was enabled only for host-passthrough and max
cpu model. Let's add it for any KVM arm cpu which has the generic
timer feature enabled.
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id:
20200608121243.2076-1-fangying1@huawei.com
[PMM: minor commit message tweak, removed inaccurate
suggested-by tag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Erik Smit [Tue, 16 Jun 2020 09:32:29 +0000 (10:32 +0100)]
Implement configurable descriptor size in ftgmac100
The hardware supports configurable descriptor sizes, configured in the DBLAC
register.
Most drivers use the default 4 word descriptor, which is currently hardcoded,
but Aspeed SDK configures 8 words to store extra data.
Signed-off-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[PMM: removed unnecessary parens]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Jean-Christophe Dubois [Tue, 16 Jun 2020 09:32:28 +0000 (10:32 +0100)]
hw/misc/imx6ul_ccm: Implement non writable bits in CCM registers
Some bits of the CCM registers are non writable.
This was left undone in the initial commit (all bits of registers were
writable).
This patch adds the required code to protect the non writable bits.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id:
20200608133508.550046-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:28 +0000 (10:32 +0100)]
target/arm: Convert Neon VDUP (scalar) to decodetree
Convert the Neon VDUP (scalar) insn to decodetree. (Note that we
can't call this just "VDUP" as we used that already in vfp.decode for
the "VDUP (general purpose register" insn.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:28 +0000 (10:32 +0100)]
target/arm: Convert Neon VTBL, VTBX to decodetree
Convert the Neon VTBL, VTBX instructions to decodetree. The actual
implementation of the insn is copied across to the new trans function
unchanged except for renaming 'tmp5' to 'tmp4'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:28 +0000 (10:32 +0100)]
target/arm: Convert Neon VEXT to decodetree
Convert the Neon VEXT insn to decodetree. Rather than keeping the
old implementation which used fixed temporaries cpu_V0 and cpu_V1
and did the extraction with by-hand shift and logic ops, we use
the TCG extract2 insn.
We don't need to special case 0 or 8 immediates any more as the
optimizer is smart enough to throw away the dead code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:28 +0000 (10:32 +0100)]
target/arm: Convert Neon 2-reg-scalar long multiplies to decodetree
Convert the Neon 2-reg-scalar long multiplies to decodetree.
These are the last instructions in the group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:27 +0000 (10:32 +0100)]
target/arm: Convert Neon 2-reg-scalar VQRDMLAH, VQRDMLSH to decodetree
Convert the VQRDMLAH and VQRDMLSH insns in the 2-reg-scalar
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:27 +0000 (10:32 +0100)]
target/arm: Convert Neon 2-reg-scalar VQDMULH, VQRDMULH to decodetree
Convert the VQDMULH and VQRDMULH insns in the 2-reg-scalar group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:27 +0000 (10:32 +0100)]
target/arm: Convert Neon 2-reg-scalar float multiplies to decodetree
Convert the float versions of VMLA, VMLS and VMUL in the Neon
2-reg-scalar group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
As noted in the comment on the WRAP_FP_FN macro, we could have
had a do_2scalar_fp() function, but for 3 insns it seemed
simpler to just do the wrapping to get hold of the fpstatus ptr.
(These are the only fp insns in the group.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:27 +0000 (10:32 +0100)]
target/arm: Convert Neon 2-reg-scalar integer multiplies to decodetree
Convert the VMLA, VMLS and VMUL insns in the Neon "2 registers and a
scalar" group to decodetree. These are 32x32->32 operations where
one of the inputs is the scalar, followed by a possible accumulate
operation of the 32-bit result.
The refactoring removes some of the oddities of the old decoder:
* operands to the operation and accumulation were often
reversed (taking advantage of the fact that most of these ops
are commutative); the new code follows the pseudocode order
* the Q bit in the insn was in a local variable 'u'; in the
new code it is decoded into a->q
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:26 +0000 (10:32 +0100)]
target/arm: Add missing TCG temp free in do_2shift_env_64()
In commit
37bfce81b10450071 we accidentally introduced a leak of a TCG
temporary in do_2shift_env_64(); free it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:26 +0000 (10:32 +0100)]
target/arm: Add 'static' and 'const' annotations to VSHLL function arrays
Mark the arrays of function pointers in trans_VSHLL_S_2sh() and
trans_VSHLL_U_2sh() as both 'static' and 'const'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:26 +0000 (10:32 +0100)]
target/arm: Convert Neon 3-reg-diff polynomial VMULL
Convert the Neon 3-reg-diff insn polynomial VMULL. This is the last
insn in this group to be converted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:26 +0000 (10:32 +0100)]
target/arm: Convert Neon 3-reg-diff saturating doubling multiplies
Convert the Neon 3-reg-diff insns VQDMULL, VQDMLAL and VQDMLSL:
these are all saturating doubling long multiplies with a possible
accumulate step.
These are the last insns in the group which use the pass-over-each
elements loop, so we can delete that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:26 +0000 (10:32 +0100)]
target/arm: Convert Neon 3-reg-diff long multiplies
Convert the Neon 3-reg-diff insns VMULL, VMLAL and VMLSL; these perform
a 32x32->64 multiply with possible accumulate.
Note that for VMLSL we do the accumulate directly with a subtraction
rather than doing a negate-then-add as the old code did.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:25 +0000 (10:32 +0100)]
target/arm: Convert Neon 3-reg-diff VABAL, VABDL to decodetree
Convert the Neon 3-reg-diff insns VABAL and VABDL to decodetree.
Like almost all the remaining insns in this group, these are
a combination of a two-input operation which returns a double width
result and then a possible accumulation of that double width
result into the destination.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:25 +0000 (10:32 +0100)]
target/arm: Convert Neon 3-reg-diff narrowing ops to decodetree
Convert the narrow-to-high-half insns VADDHN, VSUBHN, VRADDHN,
VRSUBHN in the Neon 3-registers-different-lengths group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:25 +0000 (10:32 +0100)]
target/arm: Convert Neon 3-reg-diff prewidening ops to decodetree
Convert the "pre-widening" insns VADDL, VSUBL, VADDW and VSUBW
in the Neon 3-registers-different-lengths group to decodetree.
These insns work by widening one or both inputs to double their
size, performing an add or subtract at the doubled size and
then storing the double-size result.
As usual, rather than copying the loop of the original decoder
(which needs awkward code to avoid problems when source and
destination registers overlap) we just unroll the two passes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 16 Jun 2020 09:32:25 +0000 (10:32 +0100)]
target/arm: Fix missing temp frees in do_vshll_2sh
The widenfn() in do_vshll_2sh() does not free the input 32-bit
TCGv, so we need to do this in the calling code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Peter Maydell [Tue, 16 Jun 2020 09:06:57 +0000 (10:06 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-06-16' into staging
* Latest fuzzer patches from Alexander
* Fixes for the qtest bios-tables-test
* LGPL information cleanup in qtest code
* sh4 acceptance test
* Improved submodule handling for the s390x CI test
# gpg: Signature made Tue 16 Jun 2020 08:56:10 BST
# gpg: using RSA key
27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-06-16:
configure: Let SLOF be initialized by ./scripts/git-submodule.sh
tests/acceptance: Add boot tests for sh4 QEMU advent calendar image
tests/qtest: Fix LGPL information in the file headers
fuzz: add oss-fuzz build-script
fuzz: Add support for logging QTest commands
fuzz: skip QTest serialization
bios-tables-test: Fix "-tpmdev: invalid option"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Markus Armbruster [Wed, 10 Jun 2020 05:32:47 +0000 (07:32 +0200)]
MAINTAINERS: Make section QOM cover hw/core/*bus.c as well
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-59-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:46 +0000 (07:32 +0200)]
qdev: qdev_init_nofail() is now unused, drop
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-58-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:45 +0000 (07:32 +0200)]
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-57-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:44 +0000 (07:32 +0200)]
qdev: Use qdev_realize() in qdev_device_add()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-56-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:43 +0000 (07:32 +0200)]
qdev: Make qdev_realize() support bus-less devices
So far, qdev_realize() supports only devices that plug into a bus:
argument @bus cannot be null. Extend it to support bus-less devices,
too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-55-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:42 +0000 (07:32 +0200)]
s390x/event-facility: Simplify creation of SCLP event devices
init_event_facility() creates the SCLP events bus with two SCLP event
devices (sclpquiesce and sclp-cpu-hotplug). It leaves the devices
unrealized. A comment explains they will be realized "via the bus".
The bus's realize method sclp_events_bus_realize() indeed realizes all
unrealized devices on this bus. It carries a TODO comment claiming
this "has to be done in common code". No other bus realize method
realizes its devices.
The common code in question is bus_set_realized(), which has a TODO
comment asking for recursive realization. It's been asking for years.
The only devices sclp_events_bus_realize() will ever realize are the
two init_event_facility() puts there.
Simplify as follows:
* Make the devices members of the event facility instance struct, just
like the bus. object_initialize_child() is simpler than
object_property_add_child() and object_unref().
* Realize them in the event facility realize method.
This is in line with how such things are done elsewhere.
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-54-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:41 +0000 (07:32 +0200)]
microbit: Eliminate two local variables in microbit_init()
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-53-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:40 +0000 (07:32 +0200)]
sysbus: sysbus_init_child_obj() is now unused, drop
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-52-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:39 +0000 (07:32 +0200)]
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 4
This is still the same transformation as in the previous commits, but
here the sysbus_init_child_obj() and its matching realize in are in
separate files. Fortunately, there's just one realize left to
convert.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-51-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:38 +0000 (07:32 +0200)]
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
These are init/realize pairs produced by the previous commit's
Coccinelle script where the argument test doesn't quite match. They
need even more careful review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-50-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:37 +0000 (07:32 +0200)]
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2
This is the same transformation as in the previous commit, except
sysbus_init_child_obj() and realize are too separated for the commit's
Coccinelle script to handle, typically because sysbus_init_child_obj()
is in a device's instance_init() method, and the matching realize is
in its realize() method.
Perhaps a Coccinelle wizard could make it transform that pattern, but
I'm just a bungler, and the best I can do is transforming the two
separate parts separately:
@@
expression errp;
expression child;
symbol true;
@@
- object_property_set_bool(OBJECT(child), true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression errp;
expression child;
symbol true;
@@
- object_property_set_bool(child, true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
@@
- qdev_init_nofail(DEVICE(child));
+ sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
expression dev;
@@
dev = DEVICE(child);
...
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
identifier dev;
@@
DeviceState *dev = DEVICE(child);
...
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression parent, name, size, type;
expression child;
symbol true;
@@
- sysbus_init_child_obj(parent, name, child, size, type);
+ sysbus_init_child_XXX(parent, name, child, size, type);
@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
+ object_initialize_child(parent, propname, child, type)
@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
+ object_initialize_child(parent, propname, &child, type)
This script is *unsound*: we need to manually verify init and realize
conversions are properly paired.
This commit has only the pairs where object_initialize_child()'s
@child and sysbus_realize()'s @dev argument text match exactly within
the same source file.
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-49-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:36 +0000 (07:32 +0200)]
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
I'm converting from qdev_set_parent_bus()/realize to qdev_realize();
recent commit "qdev: Convert uses of qdev_set_parent_bus() with
Coccinelle" explains why.
sysbus_init_child_obj() is a wrapper around
object_initialize_child_with_props() and qdev_set_parent_bus(). It
passes no properties.
Convert sysbus_init_child_obj()/realize to object_initialize_child()/
qdev_realize().
Coccinelle script:
@@
expression parent, name, size, type, errp;
expression child;
symbol true;
@@
- sysbus_init_child_obj(parent, name, &child, size, type);
+ sysbus_init_child_XXX(parent, name, &child, size, type);
...
- object_property_set_bool(OBJECT(&child), true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(&child), errp);
@@
expression parent, name, size, type, errp;
expression child;
symbol true;
@@
- sysbus_init_child_obj(parent, name, child, size, type);
+ sysbus_init_child_XXX(parent, name, child, size, type);
...
- object_property_set_bool(OBJECT(child), true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
@@
expression parent, name, size, type;
expression child;
expression dev;
expression expr;
@@
- sysbus_init_child_obj(parent, name, child, size, type);
+ sysbus_init_child_XXX(parent, name, child, size, type);
...
dev = DEVICE(child);
... when != dev = expr;
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
+ object_initialize_child(parent, propname, child, type)
@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
+ object_initialize_child(parent, propname, &child, type)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-48-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:35 +0000 (07:32 +0200)]
qdev: Drop qdev_realize() support for null bus
The "null @bus means main system bus" convenience feature is no longer
used. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-47-armbru@redhat.com>
Markus Armbruster [Wed, 10 Jun 2020 05:32:34 +0000 (07:32 +0200)]
sysbus: Convert to sysbus_realize() etc. with Coccinelle
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus
argument to sysbus_realize(), sysbus_realize_and_unref().
Coccinelle script:
@@
expression dev, errp;
@@
- qdev_realize(DEVICE(dev), NULL, errp);
+ sysbus_realize(SYS_BUS_DEVICE(dev), errp);
@@
expression sysbus_dev, dev, errp;
@@
+ sysbus_dev = SYS_BUS_DEVICE(dev);
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(sysbus_dev, errp);
- sysbus_dev = SYS_BUS_DEVICE(dev);
@@
expression sysbus_dev, dev, errp;
expression expr;
@@
sysbus_dev = SYS_BUS_DEVICE(dev);
... when != dev = expr;
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(sysbus_dev, errp);
@@
expression dev, errp;
@@
- qdev_realize_and_unref(DEVICE(dev), NULL, errp);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);
@@
expression dev, errp;
@@
- qdev_realize_and_unref(dev, NULL, errp);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp);
Whitespace changes minimized manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <
20200610053247.
1583243-46-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]