OSDN Git Service
James Hogan [Thu, 26 Jun 2014 14:21:11 +0000 (15:21 +0100)]
MIPS: KVM: Drop pr_info messages on init/exit
The information messages when the KVM module is loaded and unloaded are
a bit pointless and out of line with other architectures, so lets drop
them.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
James Hogan [Thu, 26 Jun 2014 12:47:22 +0000 (13:47 +0100)]
MIPS: KVM: Sort kvm_mips_get_reg() registers
Sort the registers in the kvm_mips_get_reg() switch by register number,
which puts ERROREPC after the CONFIG registers.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
James Hogan [Thu, 26 Jun 2014 12:56:52 +0000 (13:56 +0100)]
MIPS: KVM: Implement PRid CP0 register access
Implement access to the guest Processor Identification CP0 register
using the KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls. This allows the
owning process to modify and read back the value that is exposed to the
guest in this register.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
James Hogan [Fri, 6 Feb 2015 16:03:57 +0000 (16:03 +0000)]
MIPS: KVM: Handle TRAP exceptions from guest kernel
Trap instructions are used by Linux to implement BUG_ON(), however KVM
doesn't pass trap exceptions on to the guest if they occur in guest
kernel mode, instead triggering an internal error "Exception Code: 13,
not yet handled". The guest kernel then doesn't get a chance to print
the usual BUG message and stack trace.
Implement handling of the trap exception so that it gets passed to the
guest and the user is left with a more useful log message.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
James Hogan [Tue, 2 Dec 2014 13:44:13 +0000 (13:44 +0000)]
MIPS: Clear [MSA]FPE CSR.Cause after notify_die()
When handling floating point exceptions (FPEs) and MSA FPEs the Cause
bits of the appropriate control and status register (FCSR for FPEs and
MSACSR for MSA FPEs) are read and cleared before enabling interrupts,
presumably so that it doesn't have to go through the pain of restoring
those bits if the process is pre-empted, since writing those bits would
cause another immediate exception while still in the kernel.
The bits aren't normally ever restored again, since userland never
expects to see them set.
However for virtualisation it is necessary for the kernel to be able to
restore these Cause bits, as the guest may have been interrupted in an
FP exception handler but before it could read the Cause bits. This can
be done by registering a die notifier, to get notified of the exception
when such a value is restored, and if the PC was at the instruction
which is used to restore the guest state, the handler can step over it
and continue execution. The Cause bits can then remain set without
causing further exceptions.
For this to work safely a few changes are made:
- __build_clear_fpe and __build_clear_msa_fpe no longer clear the Cause
bits, and now return from exception level with interrupts disabled
instead of enabled.
- do_fpe() now clears the Cause bits and enables interrupts after
notify_die() is called, so that the notifier can chose to return from
exception without this happening.
- do_msa_fpe() acts similarly, but now actually makes use of the second
argument (msacsr) and calls notify_die() with the new DIE_MSAFP,
allowing die notifiers to be informed of MSA FPEs too.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
James Hogan [Fri, 6 Feb 2015 11:11:56 +0000 (11:11 +0000)]
MIPS: KVM: Handle MSA Disabled exceptions from guest
Guest user mode can generate a guest MSA Disabled exception on an MSA
capable core by simply trying to execute an MSA instruction. Since this
exception is unknown to KVM it will be passed on to the guest kernel.
However guest Linux kernels prior to v3.15 do not set up an exception
handler for the MSA Disabled exception as they don't support any MSA
capable cores. This results in a guest OS panic.
Since an older processor ID may be being emulated, and MSA support is
not advertised to the guest, the correct behaviour is to generate a
Reserved Instruction exception in the guest kernel so it can send the
guest process an illegal instruction signal (SIGILL), as would happen
with a non-MSA-capable core.
Fix this as minimally as reasonably possible by preventing
kvm_mips_check_privilege() from relaying MSA Disabled exceptions from
guest user mode to the guest kernel, and handling the MSA Disabled
exception by emulating a Reserved Instruction exception in the guest,
via a new handle_msa_disabled() KVM callback.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.15+
James Hogan [Fri, 27 Mar 2015 19:03:40 +0000 (19:03 +0000)]
Merge branch '4.1-fp' of git://git.linux-mips.org/ralf/upstream-sfr into kvm_mips_queue
MIPS FP/MSA fixes from the MIPS tree. Includes a fix to ensure that the
FPU is properly disabled by lose_fpu() when MSA is in use, and Paul
Burton's "FP/MSA fixes" patchset which is required for FP/MSA support in
KVM:
> This series fixes a bunch of bugs, both build & runtime, with FP & MSA
> support. Most of them only affect systems with the new FP modes & MSA
> support enabled but patch 6 in particular is more general, fixing
> problems for mips64 systems.
James Hogan [Fri, 30 Jan 2015 12:09:39 +0000 (12:09 +0000)]
MIPS: MSA: Fix big-endian FPR_IDX implementation
The maximum word size is 64-bits since MSA state is saved using st.d
which stores two 64-bit words, therefore reimplement FPR_IDX using xor,
and only within each 64-bit word.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9169/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Fri, 30 Jan 2015 12:09:38 +0000 (12:09 +0000)]
Revert "MIPS: Don't assume 64-bit FP registers for context switch"
This reverts commit
02987633df7ba2f62967791dda816eb191d1add3.
The basic premise of the patch was incorrect since MSA context
(including FP state) is saved using st.d which stores two consecutive
64-bit words in memory rather than a single 128-bit word. This means
that even with big endian MSA, the FP state is still in the first 64-bit
word.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9168/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 30 Jan 2015 12:09:37 +0000 (12:09 +0000)]
MIPS: disable FPU if the mode is unsupported
The expected semantics of __enable_fpu are for the FPU to be enabled
in the given mode if possible, otherwise for the FPU to be left
disabled and SIGFPE returned. The FPU was incorrectly being left
enabled in cases where the desired value for FR was unavailable.
Without ensuring the FPU is disabled in this case, it would be
possible for userland to go on to execute further FP instructions
natively in the incorrect mode, rather than those instructions being
trapped & emulated as they need to be.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9167/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 30 Jan 2015 12:09:36 +0000 (12:09 +0000)]
MIPS: prevent FP context set via ptrace being discarded
If a ptracee has not used the FPU and the ptracer sets its FP context
using PTRACE_POKEUSR, PTRACE_SETFPREGS or PTRACE_SETREGSET then that
context will be discarded upon either the ptracee using the FPU or a
further write to the context via ptrace. Prevent this loss by recording
that the task has "used" math once its FP context has been written to.
The context initialisation code that was present for the PTRACE_POKEUSR
case is reused for the other 2 cases to provide consistent behaviour
for the different ptrace requests.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9166/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 30 Jan 2015 12:09:35 +0000 (12:09 +0000)]
MIPS: Ensure FCSR cause bits are clear after invoking FPU emulator
When running the emulator to handle an instruction that raised an FP
unimplemented operation exception, the FCSR cause bits were being
cleared. This is done to ensure that the kernel does not take an FP
exception when later restoring FP context to registers. However, this
was not being done when the emulator is invoked in response to a
coprocessor unusable exception. This happens in 2 cases:
- There is no FPU present in the system. In this case things were
OK, since the FP context is never restored to hardware registers
and thus no FP exception may be raised when restoring FCSR.
- The FPU could not be configured to the mode required by the task.
In this case it would be possible for the emulator to set cause
bits which are later restored to hardware if the task migrates
to a CPU whose associated FPU does support its mode requirements,
or if the tasks FP mode requirements change.
Consistently clear the cause bits after invoking the emulator, by moving
the clearing to process_fpemu_return and ensuring this is always called
before the tasks FP context is restored. This will make it easier to
catch further paths invoking the emulator in future, as will be
introduced in further patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9165/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 30 Jan 2015 12:09:34 +0000 (12:09 +0000)]
MIPS: clear MSACSR cause bits when handling MSA FP exception
Much like for traditional scalar FP exceptions, the cause bits in the
MSACSR register need to be cleared following an MSA FP exception.
Without doing so the exception will simply be raised again whenever
the kernel restores MSACSR from a tasks saved context, leading to
undesirable spurious exceptions. Clear the cause bits from the
handle_msa_fpe function, mirroring the way handle_fpe clears the
cause bits in FCSR.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9164/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 30 Jan 2015 12:09:33 +0000 (12:09 +0000)]
MIPS: wrap cfcmsa & ctcmsa accesses for toolchains with MSA support
Uses of the cfcmsa & ctcmsa instructions were not being wrapped by a
macro in the case where the toolchain supports MSA, since the arguments
exactly match a typical use of the instructions. However using current
toolchains this leads to errors such as:
arch/mips/kernel/genex.S:437: Error: opcode not supported on this processor: mips32r2 (mips32r2) `cfcmsa $5,1'
Thus uses of the instructions must be in the context of a ".set msa"
directive, however doing that from the users of the instructions would
be messy due to the possibility that the toolchain does not support
MSA. Fix this by renaming the macros (prepending an underscore) in order
to avoid recursion when attempting to emit the instructions, and provide
implementations for the TOOLCHAIN_SUPPORTS_MSA case which ".set msa" as
appropriate.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9163/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 30 Jan 2015 12:09:32 +0000 (12:09 +0000)]
MIPS: remove MSA macro recursion
Recursive macros made the code more concise & worked great for the
case where the toolchain doesn't support MSA. However, with toolchains
which do support MSA they lead to build failures such as:
arch/mips/kernel/r4k_switch.S: Assembler messages:
arch/mips/kernel/r4k_switch.S:148: Error: invalid operands `insert.w $w(0+1)[2],$1'
arch/mips/kernel/r4k_switch.S:148: Error: invalid operands `insert.w $w(0+1)[3],$1'
arch/mips/kernel/r4k_switch.S:148: Error: invalid operands `insert.w $w((0+1)+1)[2],$1'
arch/mips/kernel/r4k_switch.S:148: Error: invalid operands `insert.w $w((0+1)+1)[3],$1'
...
Drop the recursion from msa_init_all_upper invoking the msa_init_upper
macro explicitly for each vector register.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9162/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 30 Jan 2015 12:09:31 +0000 (12:09 +0000)]
MIPS: assume at as source/dest of MSA copy/insert instructions
Assuming at ($1) as the source or destination register of copy or
insert instructions:
- Simplifies the macros providing those instructions for toolchains
without MSA support.
- Avoids an unnecessary move instruction when at is used as the source
or destination register anyway.
- Is sufficient for the uses to be introduced in the kernel by a
subsequent patch.
Note that due to a patch ordering snafu on my part this also fixes the
currently broken build with MSA support enabled. The build has been
broken since commit
c9017757c532 "MIPS: init upper 64b of vector
registers when MSA is first used", which this patch should have
preceeded.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9161/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Fri, 27 Mar 2015 17:00:03 +0000 (17:00 +0000)]
MIPS: Push .set mips64r* into the functions needing it
The {save,restore}_fp_context{,32} functions require that the assembler
allows the use of sdc instructions on any FP register, and this is
acomplished by setting the arch to mips64r2 or mips64r6
(using MIPS_ISA_ARCH_LEVEL_RAW).
However this has the effect of enabling the assembler to use mips64
instructions in the expansion of pseudo-instructions. This was done in
the (now-reverted) commit
eec43a224cf1 "MIPS: Save/restore MSA context
around signals" which led to my mistakenly believing that there was an
assembler bug, when in reality the assembler was just emitting mips64
instructions. Avoid the issue for future commits which will add code to
r4k_fpu.S by pushing the .set MIPS_ISA_ARCH_LEVEL_RAW directives into
the functions that require it, and remove the spurious assertion
declaring the assembler bug.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[james.hogan@imgtec.com: Rebase on v4.0-rc1 and reword commit message to
reflect use of MIPS_ISA_ARCH_LEVEL_RAW]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9612/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Wed, 25 Feb 2015 13:08:05 +0000 (13:08 +0000)]
MIPS: lose_fpu(): Disable FPU when MSA enabled
The lose_fpu() function only disables the FPU in CP0_Status.CU1 if the
FPU is in use and MSA isn't enabled.
This isn't necessarily a problem because KSTK_STATUS(current), the
version of CP0_Status stored on the kernel stack on entry from user
mode, does always get updated and gets restored when returning to user
mode, but I don't think it was intended, and it is inconsistent with the
case of only the FPU being in use. Sometimes leaving the FPU enabled may
also mask kernel bugs where FPU operations are executed when the FPU
might not be enabled.
So lets disable the FPU in the MSA case too.
Fixes:
33c771ba5c5d ("MIPS: save/disable MSA in lose_fpu")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9323/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Jan Kiszka [Mon, 23 Mar 2015 18:27:19 +0000 (19:27 +0100)]
KVM: nVMX: Add support for rdtscp
If the guest CPU is supposed to support rdtscp and the host has rdtscp
enabled in the secondary execution controls, we can also expose this
feature to L1. Just extend nested_vmx_exit_handled to properly route
EXIT_REASON_RDTSCP.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Radim Krčmář [Thu, 19 Mar 2015 20:52:41 +0000 (21:52 +0100)]
KVM: x86: inline kvm_ioapic_handles_vector()
An overhead from function call is not appropriate for its size and
frequency of execution.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Marcelo Tosatti [Mon, 23 Mar 2015 23:32:02 +0000 (20:32 -0300)]
Merge tag 'kvm-s390-next-
20150318' of git://git./linux/kernel/git/kvms390/linux into queue
KVM: s390: Features and fixes for 4.1 (kvm/next)
1. Fixes
2. Implement access register mode in KVM
3. Provide a userspace post handler for the STSI instruction
4. Provide an interface for compliant memory accesses
5. Provide an interface for getting/setting the guest storage key
6. Fixup for the vector facility patches: do not announce the
vector facility in the guest for old QEMUs.
1-5 were initially shown as RFC in
http://www.spinics.net/lists/kvm/msg114720.html
some small review changes
- added some ACKs
- have the AR mode patches first
- get rid of unnecessary AR_INVAL define
- typos and language
6. two new patches
The two new patches fixup the vector support patches that were
introduced in the last pull request for QEMU versions that dont
know about vector support and guests that do. (We announce the
facility bit, but dont enable the facility so vector aware guests
will crash on vector instructions).
Marcelo Tosatti [Mon, 23 Mar 2015 23:21:51 +0000 (20:21 -0300)]
x86: kvm: Revert "remove sched notifier for cross-cpu migrations"
The following point:
2. per-CPU pvclock time info is updated if the
underlying CPU changes.
Is not true anymore since "KVM: x86: update pvclock area conditionally,
on cpu migration".
Add task migration notification back.
Problem noticed by Andy Lutomirski.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: stable@kernel.org # 3.11+
Takuya Yoshikawa [Tue, 17 Mar 2015 07:19:58 +0000 (16:19 +0900)]
KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()
When all bits in mask are not set,
kvm_arch_mmu_enable_log_dirty_pt_masked() has nothing to do. But since
it needs to be called from the generic code, it cannot be inlined, and
a few function calls, two when PML is enabled, are wasted.
Since it is common to see many pages remain clean, e.g. framebuffers can
stay calm for a long time, it is worth eliminating this overhead.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Bandan Das [Mon, 16 Mar 2015 21:18:25 +0000 (17:18 -0400)]
KVM: SVM: Fix confusing message if no exit handlers are installed
I hit this path on a AMD box and thought
someone was playing a April Fool's joke on me.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Fri, 13 Mar 2015 09:39:45 +0000 (17:39 +0800)]
KVM: x86: For the symbols used locally only should be static type
This patch fix the following sparse warnings:
for arch/x86/kvm/x86.c:
warning: symbol 'emulator_read_write' was not declared. Should it be static?
warning: symbol 'emulator_write_emulated' was not declared. Should it be static?
warning: symbol 'emulator_get_dr' was not declared. Should it be static?
warning: symbol 'emulator_set_dr' was not declared. Should it be static?
for arch/x86/kvm/pmu.c:
warning: symbol 'fixed_pmc_events' was not declared. Should it be static?
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Fri, 13 Mar 2015 09:39:44 +0000 (17:39 +0800)]
KVM: x86: Avoid using plain integer as NULL pointer warning
This patch fix the following sparse warning:
for file arch/x86/kvm/x86.c:
warning: Using plain integer as NULL pointer
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Michael Mueller [Mon, 16 Mar 2015 15:05:41 +0000 (16:05 +0100)]
KVM: s390: represent SIMD cap in kvm facility
The patch represents capability KVM_CAP_S390_VECTOR_REGISTERS by means
of the SIMD facility bit. This allows to a) disable the use of SIMD when
used in conjunction with a not-SIMD-aware QEMU, b) to enable SIMD when
used with a SIMD-aware version of QEMU and c) finally by means of a QEMU
version using the future cpu model ioctls.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Tested-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Michael Mueller [Tue, 17 Mar 2015 10:03:07 +0000 (11:03 +0100)]
KVM: s390: drop SIMD bit from kvm_s390_fac_list_mask
Setting the SIMD bit in the KVM mask is an issue because it makes the
facility visible but not usable to the guest, thus it needs to be
removed again.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Jason J. Herne [Tue, 23 Sep 2014 13:23:01 +0000 (09:23 -0400)]
KVM: s390: Create ioctl for Getting/Setting guest storage keys
Provide the KVM_S390_GET_SKEYS and KVM_S390_SET_SKEYS ioctl which can be used
to get/set guest storage keys. This functionality is needed for live migration
of s390 guests that use storage keys.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Ekaterina Tumanova [Fri, 30 Jan 2015 15:55:56 +0000 (16:55 +0100)]
KVM: s390: introduce post handlers for STSI
The Store System Information (STSI) instruction currently collects all
information it relays to the caller in the kernel. Some information,
however, is only available in user space. An example of this is the
guest name: The kernel always sets "KVMGuest", but user space knows the
actual guest name.
This patch introduces a new exit, KVM_EXIT_S390_STSI, guarded by a
capability that can be enabled by user space if it wants to be able to
insert such data. User space will be provided with the target buffer
and the requested STSI function code.
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Thomas Huth [Fri, 6 Feb 2015 14:01:21 +0000 (15:01 +0100)]
KVM: s390: Add MEMOP ioctls for reading/writing guest memory
On s390, we've got to make sure to hold the IPTE lock while accessing
logical memory. So let's add an ioctl for reading and writing logical
memory to provide this feature for userspace, too.
The maximum transfer size of this call is limited to 64kB to prevent
that the guest can trigger huge copy_from/to_user transfers. QEMU
currently only requests up to one or two pages so far, so 16*4kB seems
to be a reasonable limit here.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Alexander Yarygin [Mon, 9 Mar 2015 11:17:25 +0000 (14:17 +0300)]
KVM: s390: Add access register mode
Access register mode is one of the modes that control dynamic address
translation. In this mode the address space is specified by values of
the access registers. The effective address-space-control element is
obtained from the result of the access register translation. See
the "Access-Register Introduction" section of the chapter 5 "Program
Execution" in "Principles of Operations" for more details.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Alexander Yarygin [Thu, 22 Jan 2015 09:44:11 +0000 (12:44 +0300)]
KVM: s390: Optimize paths where get_vcpu_asce() is invoked
During dynamic address translation the get_vcpu_asce()
function can be invoked several times. It's ok for usual modes, but will
be slow if CPUs are in AR mode. Let's call the get_vcpu_asce() once and
pass the result to the called functions.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Alexander Yarygin [Mon, 19 Jan 2015 10:24:51 +0000 (13:24 +0300)]
KVM: s390: Guest's memory access functions get access registers
In access register mode, the write_guest() read_guest() and other
functions will invoke the access register translation, which
requires an ar, designated by one of the instruction fields.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Alexander Yarygin [Tue, 3 Mar 2015 11:26:14 +0000 (14:26 +0300)]
KVM: s390: Fix low-address protection for real addresses
The kvm_s390_check_low_addr_protection() function is used only with real
addresses. According to the POP (the "Low-Address Protection"
paragraph in chapter 3), if the effective address is real or absolute,
the low-address protection procedure should raise a PROTECTION exception
only when the low-address protection is enabled in the control register
0 and the address is low.
This patch removes ASCE checks from the function and renames it to
better reflect its behavior.
Cc: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Dominik Dingel [Thu, 12 Mar 2015 12:55:53 +0000 (13:55 +0100)]
KVM: s390: cleanup jump lables in kvm_arch_init_vm
As all cleanup functions can handle their respective NULL case
there is no need to have more than one error jump label.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Geert Uytterhoeven [Mon, 9 Mar 2015 20:27:12 +0000 (21:27 +0100)]
KVM: s390: Spelling s/intance/instance/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-Id: <
1425932832-6244-1-git-send-email-geert+renesas@glider.be>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Jan Kiszka [Mon, 9 Mar 2015 19:56:43 +0000 (20:56 +0100)]
KVM: nVMX: Do not emulate #UD while in guest mode
While in L2, leave all #UD to L2 and do not try to emulate it. If L1 is
interested in doing this, it reports its interest via the exception
bitmap, and we never get into handle_exception of L0 anyway.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Mon, 9 Mar 2015 19:27:43 +0000 (20:27 +0100)]
KVM: x86: Fix re-execution of patched vmmcall
For a very long time (since
2b3d2a20), the path handling a vmmcall
instruction of the guest on an Intel host only applied the patch but no
longer handled the hypercall. The reverse case, vmcall on AMD hosts, is
fine. As both em_vmcall and em_vmmcall actually have to do the same, we
can fix the issue by consolidating both into the same handler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
David Kaplan [Fri, 6 Mar 2015 20:44:35 +0000 (14:44 -0600)]
x86: svm: use cr_interception for SVM_EXIT_CR0_SEL_WRITE
Another patch in my war on emulate_on_interception() use as a svm exit handler.
These were pulled out of a larger patch at the suggestion of Radim Krcmar, see
https://lkml.org/lkml/2015/2/25/559
Changes since v1:
* fixed typo introduced after test, retested
Signed-off-by: David Kaplan <david.kaplan@amd.com>
[separated out just cr_interception part from larger removal of
INTERCEPT_CR0_WRITE, forward ported, tested]
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Marcelo Tosatti [Fri, 13 Mar 2015 01:09:35 +0000 (22:09 -0300)]
Merge tag 'kvm-s390-next-
20150306' of git://git./linux/kernel/git/kvms390/linux into queue
KVM: s390: Features and Fixes for 4.1 (kvm/next)
1. Several Fixes and enhancements
---------------------------------
- These 3 patches have cc stable:
b75f4c9 KVM: s390: Zero out current VMDB of STSI before including level3 data.
261520d KVM: s390: fix handling of write errors in the tpi handler
15462e3 KVM: s390: reinjection of irqs can fail in the tpi handler
2. SIMD support the kernel part (introduced with z13)
-----------------------------------------------------
- two KVM-generic changes in kvm.h:
1. New capability that can be enabled: KVM_CAP_S390_VECTOR_REGISTERS
2. increased padding size for sync regs in struct kvm_run to clarify that
sync regs can be larger than 1k. This is fine as this is the last
element in the structure.
Christian Borntraeger [Thu, 12 Mar 2015 13:59:26 +0000 (14:59 +0100)]
KVM: MAINTAINERS: add file arch/x86/kernel/kvm.c|kvmclock.c
The KVM list should be CCed on changes for arch/x86/kernel/kvm.c
and arch/x86/kernel/kvmclock.c
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
David Kaplan [Mon, 2 Mar 2015 19:43:37 +0000 (13:43 -0600)]
kvm: svm: make wbinvd faster
No need to re-decode WBINVD since we know what it is from the intercept.
Signed-off-by: David Kaplan <David.Kaplan@amd.com>
[extracted from larger unlrelated patch, forward ported, tested,style cleanup]
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Joel Schopp [Mon, 2 Mar 2015 19:43:31 +0000 (13:43 -0600)]
kvm: x86: make kvm_emulate_* consistant
Currently kvm_emulate() skips the instruction but kvm_emulate_* sometimes
don't. The end reult is the caller ends up doing the skip themselves.
Let's make them consistant.
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Thu, 26 Feb 2015 06:58:26 +0000 (14:58 +0800)]
KVM: Use pr_info/pr_err in kvm_main.c
WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
+ printk(KERN_INFO "kvm: exiting hardware virtualization\n");
WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then
dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
+ printk(KERN_ERR "kvm: misc device register failed\n");
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Thu, 26 Feb 2015 06:58:25 +0000 (14:58 +0800)]
KVM: Fix indentation in kvm_main.c
ERROR: code indent should use tabs where possible
+ const struct kvm_io_range *r2)$
WARNING: please, no spaces at the start of a line
+ const struct kvm_io_range *r2)$
This patch fixes this ERROR & WARNING to reduce noise when checking new
patches in kvm_main.c.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Thu, 26 Feb 2015 06:58:24 +0000 (14:58 +0800)]
KVM: no space before tabs in kvm_main.c
WARNING: please, no space before tabs
+ * ^I^Ikvm->lock --> kvm->slots_lock --> kvm->irq_lock$
WARNING: please, no space before tabs
+^I^I * ^I- gfn_to_hva (kvm_read_guest, gfn_to_pfn)$
WARNING: please, no space before tabs
+^I^I * ^I- kvm_is_visible_gfn (mmu_check_roots)$
This patch fixes these warnings to reduce noise when checking new
patches in kvm_main.c.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Thu, 26 Feb 2015 06:58:23 +0000 (14:58 +0800)]
KVM: Missing blank line after declarations in kvm_main.c
There are many Warnings like this:
WARNING: Missing a blank line after declarations
+ struct kvm_coalesced_mmio_zone zone;
+ r = -EFAULT;
This patch fixes these warnings to reduce noise when checking new
patches in kvm_main.c.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Thu, 26 Feb 2015 06:58:22 +0000 (14:58 +0800)]
KVM: EXPORT_SYMBOL should immediately follow its function
WARNING: EXPORT_SYMBOL(foo); should immediately follow its
function/variable
+EXPORT_SYMBOL_GPL(gfn_to_page);
This patch fixes these warnings to reduce noise when checking new
patches in kvm_main.c.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Thu, 26 Feb 2015 06:58:21 +0000 (14:58 +0800)]
KVM: Fix ERROR: do not initialise statics to 0 or NULL in kvm_main.c
ERROR: do not initialise statics to 0 or NULL
+static int kvm_usage_count = 0;
The kvm_usage_count will be placed to .bss segment when linking, so
not need to set it to 0 here obviously.
This patch fixes this ERROR to reduce noise when checking new patches
in kvm_main.c.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Thu, 26 Feb 2015 06:58:20 +0000 (14:58 +0800)]
KVM: Fix WARNING: labels should not be indented in kvm_main.c
WARNING: labels should not be indented
+ out_free_irq_routing:
This patch fixes this WARNING to reduce noise when checking new patches
in kvm_main.c.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Xiubo Li [Thu, 26 Feb 2015 06:58:19 +0000 (14:58 +0800)]
KVM: Fix WARNINGs for 'sizeof(X)' instead of 'sizeof X' in kvm_main.c
There are many WARNINGs like this:
WARNING: sizeof tr should be sizeof(tr)
+ if (copy_from_user(&tr, argp, sizeof tr))
In kvm_main.c many places are using 'sizeof(X)', and the other places
are using 'sizeof X', while the kernel recommands to use 'sizeof(X)',
so this patch will replace all 'sizeof X' to 'sizeof(X)' to make them
consistent and at the same time to reduce the WARNINGs noise when we
are checking new patches.
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Thomas Huth [Tue, 24 Feb 2015 20:29:25 +0000 (21:29 +0100)]
KVM: Get rid of kvm_kvfree()
kvm_kvfree() provides exactly the same functionality as the
new common kvfree() function - so let's simply replace the
kvm function with the common function.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Christian Borntraeger [Fri, 27 Feb 2015 15:50:10 +0000 (16:50 +0100)]
KVM: make halt_poll_ns static
halt_poll_ns is used only locally. Make it static.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Wincy Van [Wed, 24 Dec 2014 03:14:29 +0000 (11:14 +0800)]
KVM: ioapic: Record edge-triggered interrupts delivery status
This patch fixes the bug discussed in
https://www.mail-archive.com/kvm@vger.kernel.org/msg109813.html
This patch uses a new field named irr_delivered to record the
delivery status of edge-triggered interrupts, and clears the
delivered interrupts in kvm_get_ioapic. So it has the same effect
of commit
0bc830b05c667218d703f2026ec866c49df974fc
("KVM: ioapic: clear IRR for edge-triggered interrupts at delivery")
while avoids the bug of Windows guests.
Signed-off-by: Wincy Van <fanwenyi0529@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Kevin Mulvey [Fri, 20 Feb 2015 13:21:37 +0000 (08:21 -0500)]
KVM: fix checkpatch.pl errors in kvm/irqchip.c
Fix whitespace around while
Signed-off-by: Kevin Mulvey <kmulvey@linux.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Kevin Mulvey [Fri, 20 Feb 2015 13:21:36 +0000 (08:21 -0500)]
KVM: white space formatting in kvm_main.c
Better alignment of loop using tabs rather than spaces, this
makes checkpatch.pl happier.
Signed-off-by: Kevin Mulvey <kmulvey@linux.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
David Kaplan [Fri, 20 Feb 2015 22:02:10 +0000 (16:02 -0600)]
KVM: SVM: use kvm_register_write()/read()
KVM has nice wrappers to access the register values, clean up a few places
that should use them but currently do not.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
[forward port and testing]
Signed-off-by: Joel Schopp <joel.schopp@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Linus Torvalds [Tue, 10 Mar 2015 01:59:50 +0000 (18:59 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm/s390 bugfixes from Marcelo Tosatti.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: non-LPAR case obsolete during facilities mask init
KVM: s390: include guest facilities in kvm facility test
KVM: s390: fix in memory copy of facility lists
KVM: s390/cpacf: Fix kernel bug under z/VM
KVM: s390/cpacf: Enable key wrapping by default
Linus Torvalds [Tue, 10 Mar 2015 01:55:52 +0000 (18:55 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"One performance optimization for page_clear and a couple of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: fix incorrect ASCE after crst_table_downgrade
s390/ftrace: fix crashes when switching tracers / add notrace to cpu_relax()
s390/pci: unify pci_iomap symbol exports
s390/pci: fix [un]map_resources sequence
s390: let the compiler do page clearing
s390/pci: fix possible information leak in mmio syscall
s390/dcss: array index 'i' is used before limits check.
s390/scm_block: fix off by one during cluster reservation
s390/jump label: improve and fix sanity check
s390/jump label: add missing jump_label_apply_nops() call
Linus Torvalds [Tue, 10 Mar 2015 01:44:06 +0000 (18:44 -0700)]
Merge tag 'trace-fixes-v4.0-rc2-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull seq-buf/ftrace fixes from Steven Rostedt:
"This includes fixes for seq_buf_bprintf() truncation issue. It also
contains fixes to ftrace when /proc/sys/kernel/ftrace_enabled and
function tracing are started. Doing the following causes some issues:
# echo 0 > /proc/sys/kernel/ftrace_enabled
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
# echo 1 > /proc/sys/kernel/ftrace_enabled
# echo nop > /sys/kernel/debug/tracing/current_tracer
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
As well as with function tracing too. Pratyush Anand first reported
this issue to me and supplied a patch. When I tested this on my x86
test box, it caused thousands of backtraces and warnings to appear in
dmesg, which also caused a denial of service (a warning for every
function that was listed). I applied Pratyush's patch but it did not
fix the issue for me. I looked into it and found a slight problem
with trampoline accounting. I fixed it and sent Pratyush a patch, but
he said that it did not fix the issue for him.
I later learned tha Pratyush was using an ARM64 server, and when I
tested on my ARM board, I was able to reproduce the same issue as
Pratyush. After applying his patch, it fixed the problem. The above
test uncovered two different bugs, one in x86 and one in ARM and
ARM64. As this looked like it would affect PowerPC, I tested it on my
PPC64 box. It too broke, but neither the patch that fixed ARM or x86
fixed this box (the changes were all in generic code!). The above
test, uncovered two more bugs that affected PowerPC. Again, the
changes were only done to generic code. It's the way the arch code
expected things to be done that was different between the archs. Some
where more sensitive than others.
The rest of this series fixes the PPC bugs as well"
* tag 'trace-fixes-v4.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled
ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl
ftrace: Clear REGS_EN and TRAMP_EN flags on disabling record via sysctl
seq_buf: Fix seq_buf_bprintf() truncation
seq_buf: Fix seq_buf_vprintf() truncation
Linus Torvalds [Tue, 10 Mar 2015 01:17:21 +0000 (18:17 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) nft_compat accidently truncates ethernet protocol to 8-bits, from
Arturo Borrero.
2) Memory leak in ip_vs_proc_conn(), from Julian Anastasov.
3) Don't allow the space required for nftables rules to exceed the
maximum value representable in the dlen field. From Patrick
McHardy.
4) bcm63xx_enet can accidently leave interrupts permanently disabled
due to errors in the NAPI polling exit logic. Fix from Nicolas
Schichan.
5) Fix OOPSes triggerable by the ping protocol module, due to missing
address family validations etc. From Lorenzo Colitti.
6) Don't use RCU locking in sleepable context in team driver, from Jiri
Pirko.
7) xen-netback miscalculates statistic offset pointers when reporting
the stats to userspace. From David Vrabel.
8) Fix a leak of up to 256 pages per VIF destroy in xen-netaback, also
from David Vrabel.
9) ip_check_defrag() cannot assume that skb_network_offset(),
particularly when it is used by the AF_PACKET fanout defrag code.
From Alexander Drozdov.
10) gianfar driver doesn't query OF node names properly when trying to
determine the number of hw queues available. Fix it to explicitly
check for OF nodes named queue-group. From Tobias Waldekranz.
11) MID field in macb driver should be 12 bits, not 16. From Punnaiah
Choudary Kalluri.
12) Fix unintentional regression in traceroute due to timestamp socket
option changes. Empty ICMP payloads should be allowed in
non-timestamp cases. From Willem de Bruijn.
13) When devices are unregistered, we have to get rid of AF_PACKET
multicast list entries that point to it via ifindex. Fix from
Francesco Ruggeri.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
tipc: fix bug in link failover handling
net: delete stale packet_mclist entries
net: macb: constify macb configuration data
MAINTAINERS: add Marc Kleine-Budde as co maintainer for CAN networking layer
MAINTAINERS: linux-can moved to github
can: kvaser_usb: Read all messages in a bulk-in URB buffer
can: kvaser_usb: Avoid double free on URB submission failures
can: peak_usb: fix missing ctrlmode_ init for every dev
can: add missing initialisations in CAN related skbuffs
ip: fix error queue empty skb handling
bgmac: Clean warning messages
tcp: align tcp_xmit_size_goal() on tcp_tso_autosize()
net: fec: fix unbalanced clk disable on driver unbind
net: macb: Correct the MID field length value
net: gianfar: correctly determine the number of queue groups
ipv4: ip_check_defrag should not assume that skb_network_offset is zero
net: bcmgenet: properly disable password matching
net: eth: xgene: fix booting with devicetree
bnx2x: Force fundamental reset for EEH recovery
xen-netback: refactor xenvif_handle_frag_list()
...
Linus Torvalds [Tue, 10 Mar 2015 01:06:13 +0000 (18:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"Miscellaneous driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: psmouse - disable "palm detection" in the focaltech driver
Input: psmouse - disable changing resolution/rate/scale for FocalTech
Input: psmouse - ensure that focaltech reports consistent coordinates
Input: psmouse - remove hardcoded touchpad size from the focaltech driver
Input: tc3589x-keypad - set IRQF_ONESHOT flag to ensure IRQ request
Input: ALPS - fix memory leak when detection fails
Input: sun4i-ts - add thermal driver dependency
Input: cyapa - remove superfluous type check in cyapa_gen5_read_idac_data()
Input: cyapa - fix unaligned functions redefinition error
Input: mma8450 - add parent device
Linus Torvalds [Tue, 10 Mar 2015 01:00:25 +0000 (18:00 -0700)]
Merge tag 'regulator-v4.0-rc2' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of driver specific fixes plus a fix for a regression in the
core where the updates to use sysfs group registration were overly
enthusiastic in eliding properties and removed some that had been
previously present"
* tag 'regulator-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix regression due to NULL constraints check
regulator: rk808: Set the enable time for LDOs
regulator: da9210: Mask all interrupt sources to deassert interrupt line
Linus Torvalds [Tue, 10 Mar 2015 00:50:02 +0000 (17:50 -0700)]
Merge tag 'spi-v4.0-rc2' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes to which the usual comments
about them being important if you see them mostly apply (except for
the comment fix). The pl022 one is particularly nasty for anyone
affected by it"
* tag 'spi-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: pl022: Fix race in giveback() leading to driver lock-up
spi: dw-mid: avoid potential NULL dereference
spi: img-spfi: Verify max spfi transfer length
spi: fix a typo in comment.
spi: atmel: Fix interrupt setup for PDC transfers
spi: dw: revisit FIFO size detection again
spi: dw-pci: correct number of chip selects
drivers: spi: ti-qspi: wait for busy bit clear before data write/read
Linus Torvalds [Tue, 10 Mar 2015 00:45:34 +0000 (17:45 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull tpm fixes from James Morris:
"fixes for the TPM driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: fix call order in tpm-chip.c
tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_send
Linus Torvalds [Tue, 10 Mar 2015 00:35:29 +0000 (17:35 -0700)]
Merge tag 'fbdev-fixes-4.0' of git://git./linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- Fix regression in with omapdss when using i2c displays
- Fix possible null deref in fbmon
- Check kalloc return value in AMBA CLCD
* tag 'fbdev-fixes-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
OMAPDSS: fix regression with display sysfs files
video: fbdev: fix possible null dereference
video: ARM CLCD: Add missing error check for devm_kzalloc
Linus Torvalds [Tue, 10 Mar 2015 00:30:09 +0000 (17:30 -0700)]
Merge branch 'for-4.0-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"The cgroup iteration update two years ago and the recent cpuset
restructuring introduced regressions in subset of cpuset
configurations. Three patches to fix them.
All are marked for -stable"
* 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: Fix cpuset sched_relax_domain_level
cpuset: fix a warning when clearing configured masks in old hierarchy
cpuset: initialize effective masks when clone_children is enabled
Linus Torvalds [Tue, 10 Mar 2015 00:23:30 +0000 (17:23 -0700)]
Merge branch 'for-4.0-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fixlet from Tejun Heo:
"Speed limiting fix for sata_fsl"
* 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
sata-fsl: Apply link speed limits
Linus Torvalds [Tue, 10 Mar 2015 00:00:54 +0000 (17:00 -0700)]
Merge branch 'for-4.0-fixes' of git://git./linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"One fix patch for a subtle livelock condition which can happen on
PREEMPT_NONE kernels involving two racing cancel_work calls. Whoever
comes in the second has to wait for the previous one to finish. This
was implemented by making the later one block for the same condition
that the former would be (work item completion) and then loop and
retest; unfortunately, depending on the wake up order, the later one
could lock out the former one to finish by busy looping on the cpu.
This is fixed by implementing explicit wait mechanism. Work item
might not belong anywhere at this point and there's remote possibility
of thundering herd problem. I originally tried to use bit_waitqueue
but it didn't work for static work items on modules. It's currently
using single wait queue with filtering wake up function and exclusive
wakeup. If this ever becomes a problem, which is not very likely, we
can try to figure out a way to piggy back on bit_waitqueue"
* 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for PREEMPT_NONE
Jon Paul Maloy [Mon, 9 Mar 2015 20:16:22 +0000 (16:16 -0400)]
tipc: fix bug in link failover handling
In commit
c637c1035534867b85b78b453c38c495b58e2c5a
("tipc: resolve race problem at unicast message reception") we
introduced a new mechanism for delivering buffers upwards from link
to socket layer.
That code contains a bug in how we handle the new link input queue
during failover. When a link is reset, some of its users may be blocked
because of congestion, and in order to resolve this, we add any pending
wakeup pseudo messages to the link's input queue, and deliver them to
the socket. This misses the case where the other, remaining link also
may have congested users. Currently, the owner node's reference to the
remaining link's input queue is unconditionally overwritten by the
reset link's input queue. This has the effect that wakeup events from
the remaining link may be unduely delayed (but not lost) for a
potentially long period.
We fix this by adding the pending events from the reset link to the
input queue that is currently referenced by the node, whichever one
it is.
This commit should be applied to both net and net-next.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Francesco Ruggeri [Mon, 9 Mar 2015 18:51:04 +0000 (11:51 -0700)]
net: delete stale packet_mclist entries
When an interface is deleted from a net namespace the ifindex in the
corresponding entries in PF_PACKET sockets' mclists becomes stale.
This can create inconsistencies if later an interface with the same ifindex
is moved from a different namespace (not that unlikely since ifindexes are
per-namespace).
In particular we saw problems with dev->promiscuity, resulting
in "promiscuity touches roof, set promiscuity failed. promiscuity
feature of device might be broken" warnings and EOVERFLOW failures of
setsockopt(PACKET_ADD_MEMBERSHIP).
This patch deletes the mclist entries for interfaces that are deleted.
Since this now causes setsockopt(PACKET_DROP_MEMBERSHIP) to fail with
EADDRNOTAVAIL if called after the interface is deleted, also make
packet_mc_drop not fail.
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josh Cartwright [Mon, 9 Mar 2015 16:14:39 +0000 (11:14 -0500)]
net: macb: constify macb configuration data
The configurations are not modified by the driver. Make them 'const' so
that they may be placed in a read-only section.
Signed-off-by: Josh Cartwright <joshc@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Mar 2015 19:41:00 +0000 (15:41 -0400)]
Merge tag 'linux-can-fixes-for-4.0-
20150309' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2015-03-09
this is a pull request for net/master for the 4.0 release cycle, it consists of
6 patches:
A patch by Oliver Hartkopp fixes a long outstanding bug in the infrastructure,
which leads to skb_under_panics when CAN interfaces are used by AF_PACKET
sockets e.g. by dhclient. Stephane Grosjean contributes a patch for the
peak_usb driver which adds a missing initialization. Two patches by Ahmed S.
Darwish fix problems in the kvaser_usb driver. Followed by two patches by
myself, updating the MAINTAINERS file
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steven Rostedt (Red Hat) [Sat, 7 Mar 2015 00:55:13 +0000 (19:55 -0500)]
ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled
Some archs (specifically PowerPC), are sensitive with the ordering of
the enabling of the calls to function tracing and setting of the
function to use to be traced.
That is, update_ftrace_function() sets what function the ftrace_caller
trampoline should call. Some archs require this to be set before
calling ftrace_run_update_code().
Another bug was discovered, that ftrace_startup_sysctl() called
ftrace_run_update_code() directly. If the function the ftrace_caller
trampoline changes, then it will not be updated. Instead a call
to ftrace_startup_enable() should be called because it tests to see
if the callback changed since the code was disabled, and will
tell the arch to update appropriately. Most archs do not need this
notification, but PowerPC does.
The problem could be seen by the following commands:
# echo 0 > /proc/sys/kernel/ftrace_enabled
# echo function > /sys/kernel/debug/tracing/current_tracer
# echo 1 > /proc/sys/kernel/ftrace_enabled
# cat /sys/kernel/debug/tracing/trace
The trace will show that function tracing was not active.
Cc: stable@vger.kernel.org # 2.6.27+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pratyush Anand [Fri, 6 Mar 2015 18:28:06 +0000 (23:58 +0530)]
ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl
When ftrace is enabled globally through the proc interface, we must check if
ftrace_graph_active is set. If it is set, then we should also pass the
FTRACE_START_FUNC_RET command to ftrace_run_update_code(). Similarly, when
ftrace is disabled globally through the proc interface, we must check if
ftrace_graph_active is set. If it is set, then we should also pass the
FTRACE_STOP_FUNC_RET command to ftrace_run_update_code().
Consider the following situation.
# echo 0 > /proc/sys/kernel/ftrace_enabled
After this ftrace_enabled = 0.
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
Since ftrace_enabled = 0, ftrace_enable_ftrace_graph_caller() is never
called.
# echo 1 > /proc/sys/kernel/ftrace_enabled
Now ftrace_enabled will be set to true, but still
ftrace_enable_ftrace_graph_caller() will not be called, which is not
desired.
Further if we execute the following after this:
# echo nop > /sys/kernel/debug/tracing/current_tracer
Now since ftrace_enabled is set it will call
ftrace_disable_ftrace_graph_caller(), which causes a kernel warning on
the ARM platform.
On the ARM platform, when ftrace_enable_ftrace_graph_caller() is called,
it checks whether the old instruction is a nop or not. If it's not a nop,
then it returns an error. If it is a nop then it replaces instruction at
that address with a branch to ftrace_graph_caller.
ftrace_disable_ftrace_graph_caller() behaves just the opposite. Therefore,
if generic ftrace code ever calls either ftrace_enable_ftrace_graph_caller()
or ftrace_disable_ftrace_graph_caller() consecutively two times in a row,
then it will return an error, which will cause the generic ftrace code to
raise a warning.
Note, x86 does not have an issue with this because the architecture
specific code for ftrace_enable_ftrace_graph_caller() and
ftrace_disable_ftrace_graph_caller() does not check the previous state,
and calling either of these functions twice in a row has no ill effect.
Link: http://lkml.kernel.org/r/e4fbe64cdac0dd0e86a3bf914b0f83c0b419f146.1425666454.git.panand@redhat.com
Cc: stable@vger.kernel.org # 2.6.31+
Signed-off-by: Pratyush Anand <panand@redhat.com>
[
removed extra if (ftrace_start_up) and defined ftrace_graph_active as 0
if CONFIG_FUNCTION_GRAPH_TRACER is not set.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt (Red Hat) [Thu, 5 Mar 2015 04:10:28 +0000 (23:10 -0500)]
ftrace: Clear REGS_EN and TRAMP_EN flags on disabling record via sysctl
When /proc/sys/kernel/ftrace_enabled is set to zero, all function
tracing is disabled. But the records that represent the functions
still hold information about the ftrace_ops that are hooked to them.
ftrace_ops may request "REGS" (have a full set of pt_regs passed to
the callback), or "TRAMP" (the ops has its own trampoline to use).
When the record is updated to represent the state of the ops hooked
to it, it sets "REGS_EN" and/or "TRAMP_EN" to state that the callback
points to the correct trampoline (REGS has its own trampoline).
When ftrace_enabled is set to zero, all ftrace locations are a nop,
so they do not point to any trampoline. But the _EN flags are still
set. This can cause the accounting to go wrong when ftrace_enabled
is cleared and an ops that has a trampoline is registered or unregistered.
For example, the following will cause ftrace to crash:
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
# echo 0 > /proc/sys/kernel/ftrace_enabled
# echo nop > /sys/kernel/debug/tracing/current_tracer
# echo 1 > /proc/sys/kernel/ftrace_enabled
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
As function_graph uses a trampoline, when ftrace_enabled is set to zero
the updates to the record are not done. When enabling function_graph
again, the record will still have the TRAMP_EN flag set, and it will
look for an op that has a trampoline other than the function_graph
ops, and fail to find one.
Cc: stable@vger.kernel.org # 3.17+
Reported-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
James Morris [Mon, 9 Mar 2015 13:38:16 +0000 (00:38 +1100)]
Merge branch 'for-current' of https://github.com/PeterHuewe/linux-tpmdd into for-linus
Marc Kleine-Budde [Fri, 6 Mar 2015 08:00:38 +0000 (09:00 +0100)]
MAINTAINERS: add Marc Kleine-Budde as co maintainer for CAN networking layer
This patch adds Marc Kleine-Budde as a co maintainer for the CAN networking
layer.
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Fri, 6 Mar 2015 07:58:33 +0000 (08:58 +0100)]
MAINTAINERS: linux-can moved to github
As gitorious will shut down at the end of May 2015, the linux-can website moved
to github. This patch reflects this change.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ahmed S. Darwish [Thu, 26 Feb 2015 15:22:02 +0000 (10:22 -0500)]
can: kvaser_usb: Read all messages in a bulk-in URB buffer
The Kvaser firmware can only read and write messages that are
not crossing the USB endpoint's wMaxPacketSize boundary. While
receiving commands from the CAN device, if the next command in
the same URB buffer crossed that max packet size boundary, the
firmware puts a zero-length placeholder command in its place
then moves the real command to the next boundary mark.
The driver did not recognize such behavior, leading to missing
a good number of rx events during a heavy rx load session.
Moreover, a tx URB context only gets freed upon receiving its
respective tx ACK event. Over time, the free tx URB contexts
pool gets depleted due to the missing ACK events. Consequently,
the netif transmission queue gets __permanently__ stopped; no
frames could be sent again except after restarting the CAN
newtwork interface.
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ahmed S. Darwish [Thu, 26 Feb 2015 15:20:11 +0000 (10:20 -0500)]
can: kvaser_usb: Avoid double free on URB submission failures
Upon a URB submission failure, the driver calls usb_free_urb()
but then manually frees the URB buffer by itself. Meanwhile
usb_free_urb() has alredy freed out that transfer buffer since
we're the only code path holding a reference to this URB.
Remove two of such invalid manual free().
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stephane Grosjean [Mon, 2 Mar 2015 10:54:38 +0000 (11:54 +0100)]
can: peak_usb: fix missing ctrlmode_ init for every dev
Fixes a missing initialization of ctrlmode and ctrlmode_supported fields,
for all other CAN devices than the first one. This fix only concerns
the PCAN-USB Pro FD dual-channels CAN-FD device made by PEAK-System.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Mon, 23 Feb 2015 19:37:54 +0000 (20:37 +0100)]
can: add missing initialisations in CAN related skbuffs
When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient
this can lead to a skb_under_panic due to missing skb initialisations.
Add the missing initialisations at the CAN skbuff creation times on driver
level (rx path) and in the network layer (tx path).
Reported-by: Austin Schuh <austin@peloton-tech.com>
Reported-by: Daniel Steer <daniel.steer@mclaren.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Willem de Bruijn [Sun, 8 Mar 2015 01:33:22 +0000 (20:33 -0500)]
ip: fix error queue empty skb handling
When reading from the error queue, msg_name and msg_control are only
populated for some errors. A new exception for empty timestamp skbs
added a false positive on icmp errors without payload.
`traceroute -M udpconn` only displayed gateways that return payload
with the icmp error: the embedded network headers are pulled before
sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise.
Fix this regression by refining when msg_name and msg_control
branches are taken. The solutions for the two fields are independent.
msg_name only makes sense for errors that configure serr->port and
serr->addr_offset. Test the first instead of skb->len. This also fixes
another issue. saddr could hold the wrong data, as serr->addr_offset
is not initialized in some code paths, pointing to the start of the
network header. It is only valid when serr->port is set (non-zero).
msg_control support differs between IPv4 and IPv6. IPv4 only honors
requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The
skb->len test can simply be removed, because skb->dev is also tested
and never true for empty skbs. IPv6 honors requests for all errors
aside from local errors and timestamps on empty skbs.
In both cases, make the policy more explicit by moving this logic to
a new function that decides whether to process msg_control and that
optionally prepares the necessary fields in skb->cb[]. After this
change, the IPv4 and IPv6 paths are more similar.
The last case is rxrpc. Here, simply refine to only match timestamps.
Fixes:
49ca0d8bfaf3 ("net-timestamp: no-payload option")
Reported-by: Jan Niehusmann <jan@gondor.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
Changes
v1->v2
- fix local origin test inversion in ip6_datagram_support_cmsg
- make v4 and v6 code paths more similar by introducing analogous
ipv4_datagram_support_cmsg
- fix compile bug in rxrpc
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Senna Tschudin [Sat, 7 Mar 2015 11:10:26 +0000 (12:10 +0100)]
bgmac: Clean warning messages
On my test environment the throughput of a file transfer drops
from 4.4MBps to 116KBps due the number of repeated warning
messages. This patch removes the warning messages as DMA works
correctly with addresses using 0xC0000000 bits.
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 8 Mar 2015 23:09:09 +0000 (16:09 -0700)]
Linux 4.0-rc3
Al Viro [Sat, 7 Mar 2015 21:08:46 +0000 (21:08 +0000)]
sunrpc: fix braino in ->poll()
POLL_OUT isn't what callers of ->poll() are expecting to see; it's
actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap
bit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Cc: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 8 Mar 2015 19:47:18 +0000 (12:47 -0700)]
Merge tag 'usb-4.0-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here's a round of USB fixes for 4.0-rc3.
Nothing major, the usual gadget, xhci and usb-serial fixes and a few
new device ids as well.
All have been in linux-next successfully"
* tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits)
xhci: Workaround for PME stuck issues in Intel xhci
xhci: fix reporting of 0-sized URBs in control endpoint
usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards
USB: ch341: set tty baud speed according to tty struct
USB: serial: cp210x: Adding Seletek device id's
USB: pl2303: disable break on shutdown
USB: mxuport: fix null deref when used as a console
USB: serial: clean up bus probe error handling
USB: serial: fix port attribute-creation race
USB: serial: fix tty-device error handling at probe
USB: serial: fix potential use-after-free after failed probe
USB: console: add dummy __module_get
USB: ftdi_sio: add PIDs for Actisense USB devices
Revert "USB: serial: make bulk_out_size a lower limit"
cdc-acm: Add support for Denso cradle CU-321
usb-storage: support for more than 8 LUNs
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539
USB: usbfs: don't leak kernel data in siginfo
xhci: Clear the host side toggle manually when endpoint is 'soft reset'
xhci: Allocate correct amount of scratchpad buffers
...
Linus Torvalds [Sun, 8 Mar 2015 19:25:40 +0000 (12:25 -0700)]
Merge tag 'tty-4.0-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for 4.0-rc3.
Along with the atime fix that you know about, here are some other
serial driver bugfixes as well. Most notable is a wait_until_sent
bugfix that was traced back to being around since before 2.6.12 that
Johan has fixed up.
All have been in linux-next successfully"
* tag 'tty-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
TTY: fix tty_wait_until_sent maximum timeout
TTY: fix tty_wait_until_sent on 64-bit machines
USB: serial: fix infinite wait_until_sent timeout
TTY: bfin_jtag_comm: remove incorrect wait_until_sent operation
net: irda: fix wait_until_sent poll timeout
serial: uapi: Declare all userspace-visible io types
serial: core: Fix iotype userspace breakage
serial: sprd: Fix missing spin_unlock in sprd_handle_irq()
console: Fix console name size mismatch
tty: fix up atime/mtime mess, take four
serial: 8250_dw: Fix get_mctrl behaviour
serial:8250:8250_pci: delete unneeded quirk entries
serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S
Change email address for 8250_pci
serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO"
Revert "tty/serial: of_serial: add DT alias ID handling"
Linus Torvalds [Sun, 8 Mar 2015 19:20:10 +0000 (12:20 -0700)]
Merge tag 'staging-4.0-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some IIO and staging driver fixes for 4.0-rc3.
Details are in the shortlog, nothing major, mostly IIO fixes for
reported issues.
All have been in linux-next successfully"
* tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
staging: comedi: adv_pci1710: fix AI INSN_READ for non-zero channel
staging: comedi: vmk80xx: remove "firmware version" kernel messages
staging: comedi: comedi_isadma: fix "stalled" detect in comedi_isadma_disable_on_sample()
iio: ak8975: fix AK09911 dependencies
iio: common: ssp_sensors: Protect PM-only functions to kill warning
IIO: si7020: Allocate correct amount of memory in devm_iio_device_alloc
Revert "iio:humidity:si7020: fix pointer to i2c client"
iio: light: gp2ap020a00f: Select REGMAP_I2C
iio: light: jsa1212: Select REGMAP_I2C
iio: ad5686: fix optional reference voltage declaration
iio:adc:mcp3422 Fix incorrect scales table
iio: mxs-lradc: fix iio channel map regression
iio: imu: adis16400: Fix sign extension
staging: iio: ad2s1200: Fix sign extension
iio: mxs-lradc: only update the buffer when its conversions have finished
iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions
iio: mxs-lradc: make ADC reads not disable touchscreen interrupts
iio: mxs-lradc: separate touchscreen and buffer virtual channels
iio: imu: inv_mpu6050: Prevent dereferencing NULL
iio: iadc: wait_for_completion_timeout time in jiffies
...
Linus Torvalds [Sun, 8 Mar 2015 19:15:47 +0000 (12:15 -0700)]
Merge tag 'char-misc-4.0-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two char/misc fixes for 4.0-rc3.
One is a reported binder driver fix needed due to a change in the mm
core that happened in 4.0-rc1. Another is a mei driver fix that
resolves a reported issue in that driver.
Both have been in linux-next for a while"
* tag 'char-misc-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: make device disabled on stop unconditionally
android: binder: fix binder mmap failures
Linus Torvalds [Sun, 8 Mar 2015 18:51:04 +0000 (11:51 -0700)]
Merge tag 'cc-4.0-rc2' of git://git./linux/kernel/git/gregkh/char-misc
Pull "code of conflict" from Greg KH:
"This file tries to set the rational basis for our code reviews, gives
some advice on how to conduct them, and provides an excalation channel
for any kernel developers if they so desire it"
[ Let's see how this works ]
* tag 'cc-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Code of Conflict
Mathias Gottschlag [Sat, 7 Mar 2015 21:38:52 +0000 (13:38 -0800)]
Input: psmouse - disable "palm detection" in the focaltech driver
Apparently, the threshold for large contact area seems to be rather low on
some devices, causing the touchpad to frequently freeze during normal
usage. Because we do now know how we are supposed to use the value in
question, this commit just drops the related code completely.
Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Mathias Gottschlag [Sat, 7 Mar 2015 21:32:10 +0000 (13:32 -0800)]
Input: psmouse - disable changing resolution/rate/scale for FocalTech
These PS/2 commands make some touchpads stop responding, so this commit
adds some dummy functions to replace the generic implementation. Because
scale changes were not encapsulated in a method of struct psmouse yet, this
commit adds a method set_scale to psmouse.
Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Mathias Gottschlag [Sat, 7 Mar 2015 21:27:08 +0000 (13:27 -0800)]
Input: psmouse - ensure that focaltech reports consistent coordinates
We don't know whether x_max or y_max really hold the maximum possible
coordinates, and we don't know for sure whether we correctly interpret the
coordinates sent by the touchpad, so we clamp the reported values to
prevent confusion in userspace code.
Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Mathias Gottschlag [Sat, 7 Mar 2015 21:26:31 +0000 (13:26 -0800)]
Input: psmouse - remove hardcoded touchpad size from the focaltech driver
The size has in most cases already been fetched from the touchpad, the
hardcoded values should have been removed.
Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Sat, 7 Mar 2015 19:56:30 +0000 (11:56 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of updates and bugfixes for the new designware-baytrail driver.
And a documentation bugfix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: add required clocks property to binding
i2c: designware-baytrail: baytrail_i2c_acquire() might sleep
i2c: designware-baytrail: cross-check lock functions
i2c: designware-baytrail: fix sparse warnings
i2c: designware-baytrail: fix typo in error path
i2c: designware-baytrail: describe magic numbers
Linus Torvalds [Sat, 7 Mar 2015 19:52:03 +0000 (11:52 -0800)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
"This contains small fixes spread across the drivers"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mmp_pdma: fix warning about slave caps
dmaengine: qcom_bam_dma: fix wrong register offsets
dmaengine: bam-dma: fix a warning about missing capabilities
dmaengine: ioatdma: workaround for incorrect DMACAP register
dmaengine: at_xdmac: fix for chan conf simplification
dmaengine: dw: don't handle interrupt when dmaengine is not used
dma: mmp-tdma: refine dma disable and dma-pos update
dmaengine: shdma: Move DMA stop to (runtime) suspend callbacks
dmaenegine: mmp-pdma: fix irq handler overwrite physical chan issue
Linus Torvalds [Sat, 7 Mar 2015 19:31:17 +0000 (11:31 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"arm64 and generic kernel/module.c (acked by Rusty) fixes for
CONFIG_DEBUG_SET_MODULE_RONX"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kernel/module.c: Update debug alignment after symtable generation
arm64: Don't use is_module_addr in setting page attributes