OSDN Git Service
Kevin Wolf [Thu, 25 Oct 2018 13:18:58 +0000 (14:18 +0100)]
file-posix: Avoid aio_worker() for QEMU_AIO_COPY_RANGE
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 25 Oct 2018 13:18:58 +0000 (14:18 +0100)]
file-posix: Avoid aio_worker() for QEMU_AIO_TRUNCATE
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 26 Oct 2018 15:53:47 +0000 (16:53 +0100)]
file-posix: Factor out raw_thread_pool_submit()
Getting the thread pool of the AioContext of a block node and scheduling
some work in it is an operation that is already done twice, and we'll
get more instances. Factor it out into a separate function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 25 Oct 2018 15:21:14 +0000 (16:21 +0100)]
file-posix: Reorganise RawPosixAIOData
RawPosixAIOData contains a lot of fields for several separate operations
that are to be processed in a worker thread and that need different
parameters. The struct is currently rather unorganised, with unions that
cover some, but not all operations, and even one #define for field names
instead of a union.
Clean this up to have some common fields and a single union. As a side
effect, on x86_64 the struct shrinks from 72 to 48 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 1 Nov 2018 18:27:38 +0000 (21:27 +0300)]
qcow2: do decompression in threads
Do decompression in threads, like it is already done for compression.
This improves asynchronous compressed reads performance.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 1 Nov 2018 18:27:37 +0000 (21:27 +0300)]
qcow2: aio support for compressed cluster read
Allocate buffers locally and release qcow2 lock. Than, reads inside
qcow2_co_preadv_compressed may be done in parallel, however all
decompression is still done synchronously. Let's improve it in the
following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 1 Nov 2018 18:27:36 +0000 (21:27 +0300)]
qcow2: use byte-based read in qcow2_decompress_cluster
We are gradually moving away from sector-based interfaces, towards
byte-based. Get rid of it here too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 1 Nov 2018 18:27:35 +0000 (21:27 +0300)]
qcow2: refactor decompress_buffer
- make it look more like a pair of qcow2_compress - rename the function
and its parameters
- drop extra out_len variable, check filling of output buffer by strm
structure itself
- fix code style
- add some documentation
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 1 Nov 2018 18:27:34 +0000 (21:27 +0300)]
qcow2: move decompression from qcow2-cluster.c to qcow2.c
Compression is done in threads in qcow2.c. We want to do decompression
in the same way, so, firstly, move it to the same file.
The only change is braces around if-body in decompress_buffer, to
satisfy checkpatch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 1 Nov 2018 18:27:33 +0000 (21:27 +0300)]
qcow2: make more generic interface for qcow2_compress
Give explicit size both for source and destination buffers, to make it
similar with decompression path and than cleanly reuse parameter
structure for decompression threads.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 1 Nov 2018 18:27:32 +0000 (21:27 +0300)]
qcow2: use Z_OK instead of 0 for deflateInit2 return code check
Use appropriate macro, corresponding to deflateInit2 spec.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Wed, 19 Sep 2018 12:43:43 +0000 (15:43 +0300)]
block/backup: drop unused synchronization interface
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Wed, 19 Sep 2018 12:43:42 +0000 (15:43 +0300)]
block/replication: drop extra synchronization
After commit
f8d59dfb40
"block/backup: fix fleecing scheme: use serialized writes" fleecing
(specifically reading from backup target, when backup source is in
backing chain of backup target) is safe, because all backup-job writes
to target are serialized. Therefore we don't need additional
synchronization for these reads.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Julio Faracco [Mon, 5 Nov 2018 15:08:06 +0000 (13:08 -0200)]
dmg: exchanging hardcoded dmg UDIF block types to enum.
This change is better to understand what kind of block type is being
handled by the code. Using a syntax similar to the DMG documentation is
easier than tracking all hex values assigned to a block type.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Julio Faracco [Mon, 5 Nov 2018 15:08:05 +0000 (13:08 -0200)]
dmg: including dmg-lzfse module inside dmg block driver.
This commit includes the support to new module dmg-lzfse into dmg block
driver. It includes the support for block type ULFO (0x80000007).
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Julio Faracco [Mon, 5 Nov 2018 15:08:04 +0000 (13:08 -0200)]
configure: adding support to lzfse library.
This commit includes the support to lzfse opensource library. With this
library dmg block driver can decompress images with this type of
compression inside.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Julio Faracco [Mon, 5 Nov 2018 15:08:03 +0000 (13:08 -0200)]
block: adding lzfse decompressing support as a module.
QEMU dmg support includes zlib and bzip2, but it does not contains lzfse
support. This commit adds the source file to extend compression support
for new DMGs.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Thu, 13 Dec 2018 18:45:18 +0000 (18:45 +0000)]
Merge remote-tracking branch 'remotes/berrange/tags/qcrypto-next-pull-request' into staging
Merge crypto patches 2018/12/12
- Fix documentation about default LUKS algorithms
- Support for multi-threaded block crypto
# gpg: Signature made Wed 12 Dec 2018 11:21:52 GMT
# gpg: using RSA key
BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/qcrypto-next-pull-request:
crypto: support multiple threads accessing one QCryptoBlock
crypto/block: introduce qcrypto_block_*crypt_helper functions
crypto/block: rename qcrypto_block_*crypt_helper
crypto/block: refactor qcrypto_block_*crypt_helper functions
crypto/block-luks: fix memory leak in qcrypto_block_luks_create
crypto: Fix defaults in QCryptoBlockCreateOptionsLUKS
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 13 Dec 2018 17:50:45 +0000 (17:50 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Pull request
Minor tracing improvements.
# gpg: Signature made Wed 12 Dec 2018 10:15:30 GMT
# gpg: using RSA key
9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: simple style changes
tracetool: Include thread id information in log backend
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 13 Dec 2018 13:41:44 +0000 (13:41 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-12-12' into staging
Monitor patches for 2018-12-12
# gpg: Signature made Wed 12 Dec 2018 10:08:15 GMT
# gpg: using RSA key
3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-monitor-2018-12-12:
tests: add oob functional test for test-qmp-cmds
Revert "tests: Add parameter to qtest_init_without_qmp_handshake"
monitor: Remove "x-oob", offer capability "oob" unconditionally
monitor: Suspend monitor instead dropping commands
monitor: avoid potential dead-lock when cleaning up
monitor: prevent inserting new monitors after cleanup
colo: check chardev can switch context
monitor: check if chardev can switch gcontext for OOB
char: add a QEMU_CHAR_FEATURE_GCONTEXT flag
monitor: accept chardev input from iothread
monitor: inline ambiguous helper functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 13 Dec 2018 13:06:09 +0000 (13:06 +0000)]
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-
20181212' into staging
s390x patches for 4.0:
- add 4.0 machine type
- various fixes and small changes
# gpg: Signature made Wed 12 Dec 2018 09:52:04 GMT
# gpg: using RSA key
DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-
20181212:
hw/s390x/virtio-ccw.c: Don't take address of fields in packed structs
vfio-ap: flag as compatible with balloon
s390x/tod: Properly stop the KVM TOD while the guest is not running
s390/MAINTAINERS: Add Halil as kvm and machine maintainer
s390x: introduce 4.0 compat machine
s390x/zpci: drop msix.available
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 13 Dec 2018 11:35:42 +0000 (11:35 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
Minor virtio-blk fixes.
# gpg: Signature made Wed 12 Dec 2018 09:50:17 GMT
# gpg: using RSA key
9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
virtio-blk: fix comment for virtio_blk_rw_complete as nalloc is initially -1
virtio-blk: rename iov to out_iov in virtio_blk_handle_request()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 13 Dec 2018 09:27:30 +0000 (09:27 +0000)]
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-12-04-1' into staging
Merge tpm 2018/12/04 v1
# gpg: Signature made Tue 04 Dec 2018 15:25:52 GMT
# gpg: using RSA key
75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2018-12-04-1:
tpm: Make sure the locality received from backend is valid
tpm: Make sure new locality passed to tpm_tis_prep_abort() is valid
tpm: Remove unused locty parameter from tpm_tis_abort()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 12 Dec 2018 21:11:49 +0000 (21:11 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2018-12-11
* New CPU features: MOVDIRI, MOVDIR64B (Liu Jingqi);
STIBP (Eduardo Habkost)
* Fix clang build warning (Peter Maydell)
# gpg: Signature made Tue 11 Dec 2018 20:52:56 GMT
# gpg: using RSA key
2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Add "stibp" flag name
target/i386/kvm.c: Don't mark cpuid_data as QEMU_PACKED
x86/cpu: Enable MOVDIR64B cpu feature
x86/cpu: Enable MOVDIRI cpu feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Vladimir Sementsov-Ogievskiy [Fri, 7 Dec 2018 16:13:51 +0000 (19:13 +0300)]
crypto: support multiple threads accessing one QCryptoBlock
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 7 Dec 2018 16:13:50 +0000 (19:13 +0300)]
crypto/block: introduce qcrypto_block_*crypt_helper functions
Introduce QCryptoBlock-based functions and use them where possible.
This is needed to implement thread-safe encrypt/decrypt operations.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 7 Dec 2018 16:13:49 +0000 (19:13 +0300)]
crypto/block: rename qcrypto_block_*crypt_helper
Rename qcrypto_block_*crypt_helper to qcrypto_block_cipher_*crypt_helper,
as it's not about QCryptoBlock. This is needed to introduce
qcrypto_block_*crypt_helper in the next commit, which will have
QCryptoBlock pointer and than will be able to use additional fields of
it, which in turn will be used to implement thread-safe QCryptoBlock
operations.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 7 Dec 2018 16:13:48 +0000 (19:13 +0300)]
crypto/block: refactor qcrypto_block_*crypt_helper functions
qcrypto_block_encrypt_helper and qcrypto_block_decrypt_helper are
almost identical, let's reduce code duplication and simplify further
improvements.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Vladimir Sementsov-Ogievskiy [Fri, 7 Dec 2018 16:13:47 +0000 (19:13 +0300)]
crypto/block-luks: fix memory leak in qcrypto_block_luks_create
Free block->cipher and block->ivgen on error path.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alberto Garcia [Fri, 5 Oct 2018 14:52:02 +0000 (16:52 +0200)]
crypto: Fix defaults in QCryptoBlockCreateOptionsLUKS
The values specified in the documentation don't match the actual
defaults set in qcrypto_block_luks_create().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Larry Dewey [Tue, 27 Nov 2018 19:08:49 +0000 (12:08 -0700)]
trace: simple style changes
This changes two lines in simple.c that end with a comma, and replaces them
with a semi-colon.
Signed-off-by: Larry Dewey <ldewey@suse.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id:
20181127190849.10558-1-ldewey@suse.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fabiano Rosas [Thu, 4 Oct 2018 14:30:09 +0000 (11:30 -0300)]
tracetool: Include thread id information in log backend
Currently the log backend prints the process id of QEMU at the start
of each output line, but since threads share the same PID there is no
clear distinction between their outputs.
Having the thread id present in the log makes it easier to see when
output comes from different threads. E.g.:
12423@
1538597569.672527:qemu_mutex_lock waiting on mutex 0x1103ee60 (/root/qemu/util/main-loop.c:236)
...
12430@
1538597569.503928:qemu_mutex_unlock released mutex 0x1103ee60 (/root/qemu/cpus.c:1238)
12431@
1538597569.503937:qemu_mutex_locked taken mutex 0x1103ee60 (/root/qemu/cpus.c:1257)
^here
In the above, 12423 is the main process id and 12430 & 12431 are the
two vcpu threads.
(qemu) info cpus
* CPU #0: thread_id=12430
CPU #1: thread_id=12431
Suggested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Mon, 10 Dec 2018 12:04:36 +0000 (12:04 +0000)]
hw/s390x/virtio-ccw.c: Don't take address of fields in packed structs
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
Patch produced with scripts/coccinelle/inplace-byteswaps.cocci
(with a couple of long lines manually wrapped).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20181210120436.30522-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Cornelia Huck [Wed, 5 Dec 2018 14:35:03 +0000 (15:35 +0100)]
vfio-ap: flag as compatible with balloon
vfio-ap devices do not pin any pages in the host. Therefore, they
are compatible with memory ballooning.
Flag them as compatible, so both vfio-ap and a balloon can be
used simultaneously.
Cc: qemu-stable@nongnu.org
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
David Hildenbrand [Fri, 30 Nov 2018 09:49:57 +0000 (10:49 +0100)]
s390x/tod: Properly stop the KVM TOD while the guest is not running
Just like on other architectures, we should stop the clock while the guest
is not running. This is already properly done for TCG. Right now, doing an
offline migration (stop, migrate, cont) can easily trigger stalls in the
guest.
Even doing a
(hmp) stop
... wait 2 minutes ...
(hmp) cont
will already trigger stalls.
So whenever the guest stops, backup the KVM TOD. When continuing to run
the guest, restore the KVM TOD.
One special case is starting a simple VM: Reading the TOD from KVM to
stop it right away until the guest is actually started means that the
time of any simple VM will already differ to the host time. We can
simply leave the TOD running and the guest won't be able to recognize
it.
For migration, we actually want to keep the TOD stopped until really
starting the guest. To be able to catch most errors, we should however
try to set the TOD in addition to simply storing it. So we can still
catch basic migration problems.
If anything goes wrong while backing up/restoring the TOD, we have to
ignore it (but print a warning). This is then basically a fallback to
old behavior (TOD remains running).
I tested this very basically with an initrd:
1. Start a simple VM. Observed that the TOD is kept running. Old
behavior.
2. Ordinary live migration. Observed that the TOD is temporarily
stopped on the destination when setting the new value and
correctly started when finally starting the guest.
3. Offline live migration. (stop, migrate, cont). Observed that the
TOD will be stopped on the source with the "stop" command. On the
destination, the TOD is temporarily stopped when setting the new
value and correctly started when finally starting the guest via
"cont".
4. Simple stop/cont correctly stops/starts the TOD. (multiple stops
or conts in a row have no effect, so works as expected)
In the future, we might want to send the guest a special kind of time sync
interrupt under some conditions, so it can synchronize its tod to the
host tod. This is interesting for migration scenarios but also when we
get time sync interrupts ourselves. This however will most probably have
to be handled in KVM (e.g. when the tods differ too much) and is not
desired e.g. when debugging the guest (single stepping should not
result in permanent time syncs). I consider something like that an add-on
on top of this basic "don't break the guest" handling.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181130094957.4121-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Christian Borntraeger [Tue, 4 Dec 2018 13:38:02 +0000 (14:38 +0100)]
s390/MAINTAINERS: Add Halil as kvm and machine maintainer
Halil does more work in this area than I do right now. Lets add Halil.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <
20181204133802.100998-1-borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Cornelia Huck [Mon, 19 Nov 2018 10:58:53 +0000 (11:58 +0100)]
s390x: introduce 4.0 compat machine
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
David Hildenbrand [Mon, 5 Nov 2018 11:03:10 +0000 (12:03 +0100)]
s390x/zpci: drop msix.available
I fail to see why this is useful as we require MSIX always and
completely fail adding a device.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181105110313.29312-2-david@redhat.com>
Fixes:
4f6482bfe3da1e6b51ad4722a0c22f22f0d54a3b
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Peter Xu [Tue, 9 Oct 2018 06:27:17 +0000 (14:27 +0800)]
tests: add oob functional test for test-qmp-cmds
Straightforward test just to let the test-qmp-cmds be complete.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20181009062718.1914-6-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Xu [Tue, 9 Oct 2018 06:27:16 +0000 (14:27 +0800)]
Revert "tests: Add parameter to qtest_init_without_qmp_handshake"
This reverts commit
ddee57e0176f6ab53b13c6c97605b62737a8fd7a.
Meanwhile, revert one line from
fa198ad9bdef to make sure
qtest_init_without_qmp_handshake() will only pass in one parameter.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20181009062718.1914-5-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Xu [Tue, 9 Oct 2018 06:27:15 +0000 (14:27 +0800)]
monitor: Remove "x-oob", offer capability "oob" unconditionally
Out-of-band command execution was introduced in commit
cf869d53172.
Unfortunately, we ran into a regression, and had to turn it into an
experimental option for 2.12 (commit
be933ffc23).
http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html
The regression has since been fixed (commit
951702f39c7 "monitor: bind
dispatch bh to iohandler context"). A thorough re-review of OOB
commands led to a few more issues, which have also been addressed.
This patch partly reverts
be933ffc23 (monitor: new parameter "x-oob"),
and makes QMP monitors again offer capability "oob" whenever they can
provide it, i.e. when the monitor's character device is capable of
running in an I/O thread.
Some trivial touch-up in the test code is required to make sure qmp-test
won't break.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20181009062718.1914-4-peterx@redhat.com>
[Conflict with "monitor: check if chardev can switch gcontext for OOB"
resolved, commit message updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Dongli Zhang [Tue, 6 Nov 2018 04:52:32 +0000 (12:52 +0800)]
virtio-blk: fix comment for virtio_blk_rw_complete as nalloc is initially -1
The initial value of nalloc is -1, but not 1.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id:
1541479952-32355-1-git-send-email-dongli.zhang@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Dongli Zhang [Tue, 6 Nov 2018 16:09:16 +0000 (00:09 +0800)]
virtio-blk: rename iov to out_iov in virtio_blk_handle_request()
In virtio_blk_handle_request(), in_iov is used for input header while iov
is used for output header. Rename iov to out_iov to pair output header's
name with in_iov to avoid confusing people when reading source code.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-id:
1541520556-8334-1-git-send-email-dongli.zhang@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Xu [Tue, 9 Oct 2018 06:27:13 +0000 (14:27 +0800)]
monitor: Suspend monitor instead dropping commands
When a QMP client sends in-band commands more quickly that we can
process them, we can either queue them without limit (QUEUE), drop
commands when the queue is full (DROP), or suspend receiving commands
when the queue is full (SUSPEND). None of them is ideal:
* QUEUE lets a misbehaving client make QEMU eat memory without bounds.
Not such a hot idea.
* With DROP, the client has to cope with dropped in-band commands. To
inform the client, we send a COMMAND_DROPPED event then. The event is
flawed by design in two ways: it's ambiguous (see commit
d621cfe0a17),
and it brings back the "eat memory without bounds" problem.
* With SUSPEND, the client has to manage the flow of in-band commands to
keep the monitor available for out-of-band commands.
We currently DROP. Switch to SUSPEND.
Managing the flow of in-band commands to keep the monitor available for
out-of-band commands isn't really hard: just count the number of
"outstanding" in-band commands (commands sent minus replies received),
and if it exceeds the limit, hold back additional ones until it drops
below the limit again.
Note that we need to be careful pairing the suspend with a resume, or
else the monitor will hang, possibly forever. And here since we need to
make sure both:
(1) popping request from the req queue, and
(2) reading length of the req queue
will be in the same critical section, we let the pop function take the
corresponding queue lock when there is a request, then we release the
lock from the caller.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <
20181009062718.1914-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Marc-André Lureau [Wed, 5 Dec 2018 20:37:37 +0000 (00:37 +0400)]
monitor: avoid potential dead-lock when cleaning up
When a monitor is connected to a Spice chardev, the monitor cleanup
can dead-lock:
#0 0x00007f43446637fd in __lll_lock_wait () at /lib64/libpthread.so.0
#1 0x00007f434465ccf4 in pthread_mutex_lock () at /lib64/libpthread.so.0
#2 0x0000556dd79f22ba in qemu_mutex_lock_impl (mutex=0x556dd81c9220 <monitor_lock>, file=0x556dd7ae3648 "/home/elmarco/src/qq/monitor.c", line=645) at /home/elmarco/src/qq/util/qemu-thread-posix.c:66
#3 0x0000556dd7431bd5 in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x556dd9abc850, errp=0x7fffb7bbddd8) at /home/elmarco/src/qq/monitor.c:645
#4 0x0000556dd79d476b in qapi_event_send_spice_disconnected (server=0x556dd98ee760, client=0x556ddaaa8560, errp=0x556dd82180d0 <error_abort>) at qapi/qapi-events-ui.c:149
#5 0x0000556dd7870fc1 in channel_event (event=3, info=0x556ddad1b590) at /home/elmarco/src/qq/ui/spice-core.c:235
#6 0x00007f434560a6bb in reds_handle_channel_event (reds=<optimized out>, event=3, info=0x556ddad1b590) at reds.c:316
#7 0x00007f43455f393b in main_dispatcher_self_handle_channel_event (info=0x556ddad1b590, event=3, self=0x556dd9a7d8c0) at main-dispatcher.c:197
#8 0x00007f43455f393b in main_dispatcher_channel_event (self=0x556dd9a7d8c0, event=event@entry=3, info=0x556ddad1b590) at main-dispatcher.c:197
#9 0x00007f4345612833 in red_stream_push_channel_event (s=s@entry=0x556ddae2ef40, event=event@entry=3) at red-stream.c:414
#10 0x00007f434561286b in red_stream_free (s=0x556ddae2ef40) at red-stream.c:388
#11 0x00007f43455f9ddc in red_channel_client_finalize (object=0x556dd9bb21a0) at red-channel-client.c:347
#12 0x00007f434b5f9fb9 in g_object_unref () at /lib64/libgobject-2.0.so.0
#13 0x00007f43455fc212 in red_channel_client_push (rcc=0x556dd9bb21a0) at red-channel-client.c:1341
#14 0x0000556dd76081ba in spice_port_set_fe_open (chr=0x556dd9925e20, fe_open=0) at /home/elmarco/src/qq/chardev/spice.c:241
#15 0x0000556dd796d74a in qemu_chr_fe_set_open (be=0x556dd9a37c00, fe_open=0) at /home/elmarco/src/qq/chardev/char-fe.c:340
#16 0x0000556dd796d4d9 in qemu_chr_fe_set_handlers (b=0x556dd9a37c00, fd_can_read=0x0, fd_read=0x0, fd_event=0x0, be_change=0x0, opaque=0x0, context=0x0, set_open=true) at /home/elmarco/src/qq/chardev/char-fe.c:280
#17 0x0000556dd796d359 in qemu_chr_fe_deinit (b=0x556dd9a37c00, del=false) at /home/elmarco/src/qq/chardev/char-fe.c:233
#18 0x0000556dd7432240 in monitor_data_destroy (mon=0x556dd9a37c00) at /home/elmarco/src/qq/monitor.c:786
#19 0x0000556dd743b968 in monitor_cleanup () at /home/elmarco/src/qq/monitor.c:4683
#20 0x0000556dd75ce776 in main (argc=3, argv=0x7fffb7bbe458, envp=0x7fffb7bbe478) at /home/elmarco/src/qq/vl.c:4660
Because spice code tries to emit a "disconnected" signal on the
monitors. Fix this dead-lock by releasing the monitor lock for
flush/destroy.
monitor_lock protects mon_list, monitor_qapi_event_state and
monitor_destroyed. monitor_flush() and monitor_data_destroy() don't
access any of those variables.
monitor_cleanup()'s loop is safe because it uses
QTAILQ_FOREACH_SAFE(), and no further monitor can be added after
calling monitor_cleanup() thanks to monitor_destroyed check in
monitor_list_append().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20181205203737.9011-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Marc-André Lureau [Wed, 5 Dec 2018 20:37:36 +0000 (00:37 +0400)]
monitor: prevent inserting new monitors after cleanup
monitor_cleanup() is one of the last things main() calls before it
returns. In the following patch, monitor_cleanup() will release the
monitor_lock during flushing. There may be pending commands to insert
new monitors, which would modify the mon_list during iteration, and
the clean-up could thus miss those new insertions.
Add a monitor_destroyed global to check if monitor_cleanup() has been
already called. In this case, don't insert the new monitor in the
list, but free it instead. A cleaner solution would involve the main
thread telling other threads to terminate, waiting for their
termination.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20181205203737.9011-7-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Marc-André Lureau [Wed, 5 Dec 2018 20:37:35 +0000 (00:37 +0400)]
colo: check chardev can switch context
COLO uses a worker context (iothread) to drive the chardev. All
backends are not able to switch the context, let's report an error in
this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20181205203737.9011-6-marcandre.lureau@redhat.com>
Reviewed-by: Li Zhijian <lizhiian@cn.fujitsu.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Marc-André Lureau [Wed, 5 Dec 2018 20:37:34 +0000 (00:37 +0400)]
monitor: check if chardev can switch gcontext for OOB
Not all backends are able to switch gcontext. Those backends cannot
drive a OOB monitor (the monitor would then be blocking on main
thread).
For example, ringbuf, spice, or more esoteric input chardevs like
braille or MUX.
We already forbid MUX because not all frontends are ready to run outside
main loop. Replace that by a context-switching feature check.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20181205203737.9011-5-marcandre.lureau@redhat.com>
[Error condition simplified, commit message adjusted accordingly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Marc-André Lureau [Wed, 5 Dec 2018 20:37:33 +0000 (00:37 +0400)]
char: add a QEMU_CHAR_FEATURE_GCONTEXT flag
QEMU_CHAR_FEATURE_GCONTEXT declares the character device can switch
GMainContext.
Assert we don't switch context when the character device doesn't
provide this feature. Character device users must not violate this
restriction. In particular, user configurations that violate them
must be rejected.
Existing frontend that rely on context switching would now assert() if
the backend doesn't allow it (instead of silently producing undesired
events in the default context). Following patches improve the
situation by reporting an error earlier instead, on the frontend side.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <
20181205203737.9011-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Marc-André Lureau [Wed, 5 Dec 2018 20:37:32 +0000 (00:37 +0400)]
monitor: accept chardev input from iothread
Chardev backends may not handle safely IO events from concurrent
threads (may not handle I/O events from concurrent threads safely,
only the write path is since commit >
9005b2a7589540a3733b3abdcfbccfe7746cd1a1). Better to wake up the
chardev from the monitor IO thread if it's being used as the chardev
context.
Unify code paths by using a BH in all cases.
Drop the now redundant aio_notify() call.
Clean up control flow not to rely on mon->use_io_thread implying
monitor_is_qmp(mon).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20181205203737.9011-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Marc-André Lureau [Wed, 5 Dec 2018 20:37:31 +0000 (00:37 +0400)]
monitor: inline ambiguous helper functions
The function were not named with "mon_iothread", or following the AIO
vs GMainContext distinction. Inline them instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20181205203737.9011-2-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Maydell [Tue, 11 Dec 2018 22:26:44 +0000 (22:26 +0000)]
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging
Trivial patches (2018-12-11)
# gpg: Signature made Tue 11 Dec 2018 18:02:20 GMT
# gpg: using RSA key
F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-patches-pull-request: (30 commits)
Fixes i386 xchgq test
maint: Grammar fix to mailmap
MAINTAINERS: Update email address for Fam Zheng
cutils: Assert in-range base for string-to-integer conversions
util: vfio-helpers: use ARRAY_SIZE in qemu_vfio_init_pci()
target: hax: fix errors in comment
MAINTAINERS: Use my work email to review Build and test automation patches
MAINTAINERS: Add a missing entry for the NVDIMM device
MAINTAINERS: Add a missing entry to the QMP section
MAINTAINERS: Add a missing entry to SPICE
MAINTAINERS: Add missing entries for the MPS2 machine
MAINTAINERS: Add missing entries for the Canon DIGIC machine
MAINTAINERS: Add missing entries to the vhost section
MAINTAINERS: Add missing entries to the PC Chipset section
MAINTAINERS: Add a missing entry for the sun4m machines
MAINTAINERS: Add a missing entry for the Old World machines
MAINTAINERS: Add a missing entry for the Xilinx S3A-DSP 1800 machine
MAINTAINERS: Add missing entries for the Jazz machine
MAINTAINERS: Add missing entries for the Xilinx ZynqMP machine
MAINTAINERS: Add a missing entry to the SPARC CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eduardo Habkost [Mon, 10 Dec 2018 18:02:50 +0000 (16:02 -0200)]
i386: Add "stibp" flag name
The STIBP flag may be supported by the host KVM module, so QEMU
can allow it to be configured manually, and it can be exposed to
guests when using "-cpu host".
No additional migration code is required because the whole
contents of spec_ctrl is already migrated in the "cpu/spec_ctrl"
section.
Corresponding KVM patch was submitted at:
https://lore.kernel.org/lkml/
20181205191956.31480-1-ehabkost@redhat.com/
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181210180250.31299-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Mon, 10 Dec 2018 11:46:54 +0000 (11:46 +0000)]
target/i386/kvm.c: Don't mark cpuid_data as QEMU_PACKED
clang complains about taking the address of a packed
member of a struct:
target/i386/kvm.c:1245:27: warning: taking address of packed member 'cpuid' of class or structure '' may result in an unaligned pointer value [-Waddress-of-packed-member]
c = cpuid_find_entry(&cpuid_data.cpuid, 1, 0);
^~~~~~~~~~~~~~~~
target/i386/kvm.c:1297:31: warning: taking address of packed member 'cpuid' of class or structure '' may result in an unaligned pointer value [-Waddress-of-packed-member]
c = cpuid_find_entry(&cpuid_data.cpuid, kvm_base, 0);
^~~~~~~~~~~~~~~~
The kernel's definitions of struct kvm_cpuid2 and struct
kvm_cpuid_entry2 are carefully set up with padding fields
so that there is no between-struct padding anyway, so
the QEMU_PACKED annotation is unnecessary and might result
in the compiler generating worse code. Drop it, and instead
assert at build time that there is no stray padding.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20181210114654.31433-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Liu Jingqi [Tue, 6 Nov 2018 07:13:27 +0000 (15:13 +0800)]
x86/cpu: Enable MOVDIR64B cpu feature
MOVDIR64B moves 64-bytes as direct-store with 64-bytes write atomicity.
Direct store is implemented by using write combining (WC) for writing
data directly into memory without caching the data.
The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 28] MOVDIR64B
The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Cc: Xu Tao <tao3.xu@intel.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Message-Id: <
1541488407-17045-3-git-send-email-jingqi.liu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Liu Jingqi [Tue, 6 Nov 2018 07:13:26 +0000 (15:13 +0800)]
x86/cpu: Enable MOVDIRI cpu feature
MOVDIRI moves doubleword or quadword from register to memory through
direct store which is implemented by using write combining (WC) for
writing data directly into memory without caching the data.
The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 27] MOVDIRI
The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Cc: Xu Tao <tao3.xu@intel.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Message-Id: <
1541488407-17045-2-git-send-email-jingqi.liu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Tue, 11 Dec 2018 19:18:58 +0000 (19:18 +0000)]
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine queue post-3.1.0 (including 4.0 machine-types)
Features:
* Add 4.0 machine-types to q35/440fx/arm/spapr (Alex Williamson)
Documentation:
* Document vCPU hotplug procedure (Kashyap Chamarthy)
* Deprecate `cpu-add` monitor commands (Kashyap Chamarthy)
Bug fixes:
* A small sun4v_rtc_write() tracing fix that fell through the cracks
(Eduardo Habkost)
* Validation of "host-nodes" option on memory backends (Eduardo Habkost)
* memory-device fixes and cleanups (David Hildenbrand)
Cleanups:
* Machine-type code cleanup (remove unnecessary instance_init functions)
(Eduardo Habkost)
* qdev, qom, and global property code cleanups (Marc-André Lureau)
* PCMachineState field renames (Corey Minyard)
* numa: Match struct to typedef name (Eric Blake)
* hostmem-file: remove object id from pmem error message (Zhang Yi)
# gpg: Signature made Tue 11 Dec 2018 17:58:03 GMT
# gpg: using RSA key
2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request: (24 commits)
qom: remove unimplemented class_finalize
qdev: move qdev_prop_register_global_list() to tests
accel: register global_props like machine globals
qom: make user_creatable_complete() specific to UserCreatable
qom: make interface types abstract
tests: qdev_prop_check_globals() doesn't return "all_used"
pc: Use default_machine_opts to set suppress_vmdesc
spapr: Delete instance_options functions
spapr: Use default_machine_opts to set suppress_vmdesc
spapr: Use default_machine_opts to set use_hotplug_event_source
virt: Eliminate separate instance_init functions
q35/440fx/arm/spapr: Add QEMU 4.0 machine type
hostmem: Validate host-nodes before setting bitmap
numa: Match struct to typedef name
i386: Rename bools in PCMachineState to end in _enabled
move ObjectClass to typedefs.h
memory-device: avoid overflows on very huge devices
memory-device: use QEMU_IS_ALIGNED
range: pass const pointer where possible
Deprecate HMP `cpu-add`
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marc-André Lureau [Tue, 4 Dec 2018 14:20:10 +0000 (18:20 +0400)]
qom: remove unimplemented class_finalize
Instead of trying to implement something that isn't well specified,
remove it. (it would be tricky to implement, since a class struct is
memcpy on children types...)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181204142023.15982-7-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Marc-André Lureau [Tue, 4 Dec 2018 14:20:09 +0000 (18:20 +0400)]
qdev: move qdev_prop_register_global_list() to tests
The function is only used by a test, move it there.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20181204142023.15982-6-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Marc-André Lureau [Tue, 4 Dec 2018 14:20:08 +0000 (18:20 +0400)]
accel: register global_props like machine globals
global_props is only used for Xen xen_compat_props. It's a static
array of GlobalProperty, like machine globals in SET_MACHINE_COMPAT().
Let's register the globals the same way, without extra copy allocation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
20181204142023.15982-5-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Marc-André Lureau [Tue, 4 Dec 2018 14:20:07 +0000 (18:20 +0400)]
qom: make user_creatable_complete() specific to UserCreatable
Instead of accepting any Object*, change user_creatable_complete() to
require a UserCreatable*. Modify the callers to pass the appropriate
argument, removing redundant dynamic cast checks in object creation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181204142023.15982-4-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Marc-André Lureau [Tue, 4 Dec 2018 14:20:06 +0000 (18:20 +0400)]
qom: make interface types abstract
Interfaces don't have instance, let's make the interface type really
abstract to avoid confusion.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181204142023.15982-3-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Marc-André Lureau [Tue, 4 Dec 2018 14:20:05 +0000 (18:20 +0400)]
tests: qdev_prop_check_globals() doesn't return "all_used"
Instead, it returns 1 if an error was detected, which is the case for:
/qdev/properties/dynamic/global/subprocess:
warning: global dynamic-prop-type-bad.prop3 has invalid class name
warning: global nohotplug-type.prop5=105 not used
warning: global nondevice-type.prop6 has invalid class name
Clarify the function return value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181204142023.15982-2-marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Wed, 5 Dec 2018 20:58:27 +0000 (18:58 -0200)]
pc: Use default_machine_opts to set suppress_vmdesc
Instead of setting suppress_vmdesc at instance_init time, set
default_machine_opts on pc_i440fx_2_2_machine_options() to
implement equivalent behavior.
This will let us eliminate the need for pc_compat_*() functions
for PC machine-types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181205205827.19387-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Wed, 5 Dec 2018 20:58:26 +0000 (18:58 -0200)]
spapr: Delete instance_options functions
Now that all instance_options functions for spapr are empty,
delete them.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181205205827.19387-5-ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Wed, 5 Dec 2018 20:58:25 +0000 (18:58 -0200)]
spapr: Use default_machine_opts to set suppress_vmdesc
Instead of setting suppress_vmdesc at instance_init time, set
default_machine_opts on spapr_machine_2_2_class_options() to
implement equivalent behavior.
This will let us eliminate the need for separate instance_init
functions for each spapr machine-type.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181205205827.19387-4-ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Wed, 5 Dec 2018 20:58:24 +0000 (18:58 -0200)]
spapr: Use default_machine_opts to set use_hotplug_event_source
Instead of setting use_hotplug_event_source at instance_init
time, set default_machine_opts on spapr_machine_2_7_class_options()
to implement equivalent behavior.
This will let us eliminate the need for separate instance_init
functions for each spapr machine-type.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181205205827.19387-3-ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Wed, 5 Dec 2018 20:58:23 +0000 (18:58 -0200)]
virt: Eliminate separate instance_init functions
All instance_init functions for all virt machine-types run
exactly the same code, so we don't need separate functions. We
only need to set instance_init for TYPE_VIRT_MACHINE.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181205205827.19387-2-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Alex Williamson [Tue, 4 Dec 2018 16:27:16 +0000 (09:27 -0700)]
q35/440fx/arm/spapr: Add QEMU 4.0 machine type
Including all machine types that might have a pcie-root-port.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <
154394083644.28192.
8501647946108201466.stgit@gimli.home>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
[ehabkost: fixed accidental recursion at spapr_machine_3_1_class_options()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Fri, 30 Nov 2018 12:28:44 +0000 (10:28 -0200)]
hostmem: Validate host-nodes before setting bitmap
host_memory_backend_set_host_nodes() was not validating
host-nodes before writing to backend->host_nodes, making QEMU
write beyond the end of the bitmap.
Fix the crash and add a simple regression test for the fix.
While at it, fix memory leak of the list returned by
visit_type_uint16List().
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181130122844.29103-1-ehabkost@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[ehabkost: removed test case code]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eric Blake [Thu, 15 Nov 2018 21:17:52 +0000 (15:17 -0600)]
numa: Match struct to typedef name
There's no reason to violate our naming conventions by having a
struct with a different name than its typedef. Messed up since
its introduction in commit
8c85901e, but made more obvious when
commit
3bfe5716 promoted it to typedefs.h.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <
20181115211752.
1295571-3-eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Corey Minyard [Wed, 7 Nov 2018 15:24:34 +0000 (09:24 -0600)]
i386: Rename bools in PCMachineState to end in _enabled
This makes their function more clear and prevents conflicts when adding
the actual devices to the machine state, if necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181107152434.22219-1-minyard@acm.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Gerd Hoffmann [Tue, 6 Nov 2018 10:23:30 +0000 (11:23 +0100)]
move ObjectClass to typedefs.h
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20181106102335.20027-2-kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Tue, 23 Oct 2018 15:23:05 +0000 (17:23 +0200)]
memory-device: avoid overflows on very huge devices
Should not be a problem right now, but it could theoretically happen
in the future.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181023152306.3123-7-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Tue, 23 Oct 2018 15:23:04 +0000 (17:23 +0200)]
memory-device: use QEMU_IS_ALIGNED
Shorter and easier to read.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181023152306.3123-6-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
David Hildenbrand [Tue, 23 Oct 2018 15:23:02 +0000 (17:23 +0200)]
range: pass const pointer where possible
If there are no changes, let's use a const pointer.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <
20181023152306.3123-4-david@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Kashyap Chamarthy [Tue, 30 Oct 2018 12:35:25 +0000 (13:35 +0100)]
Deprecate HMP `cpu-add`
Since we're deprecating the QMP `cpu-add`, let's deprecate its HMP
equivalent, too.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <
20181030123526.26415-3-kchamart@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Kashyap Chamarthy [Tue, 30 Oct 2018 12:35:24 +0000 (13:35 +0100)]
Deprecate QMP `cpu-add`
The intended functionality of QMP `cpu-add` is replaced with
`device_add` (and `query-hotpluggable-cpus`). So let's deprecate
`cpu-add`.
A complete example of vCPU hotplug with the recommended way (using
`device_add`) is provided as part of a seperate docs patch.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <
20181030123526.26415-2-kchamart@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Kashyap Chamarthy [Tue, 30 Oct 2018 12:35:26 +0000 (13:35 +0100)]
docs: Document vCPU hotplug procedure
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <
20181030123526.26415-4-kchamart@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Wed, 31 Oct 2018 00:18:43 +0000 (21:18 -0300)]
hw/timer/sun4v-rtc: Fix tracing at sun4v_rtc_write()
The code was converted to use sun4v_rtc_read() by mistake, fix
it.
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <
20181031001843.12892-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Zhang Yi [Wed, 24 Oct 2018 14:14:56 +0000 (22:14 +0800)]
hostmem-file: remove object id from pmem error message
We will never get the canonical path from the object
before object_property_add_child.
Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com>
Message-Id: <
a6491f996827f4039c1a52198ed5dcc7727cb0f9.
1540389255.git.yi.z.zhang@linux.intel.com>
[ehabkost: reword commit message]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
fabrice.desclaux@cea.fr [Fri, 7 Dec 2018 14:44:40 +0000 (15:44 +0100)]
Fixes i386 xchgq test
As "xchg" reads and writes both operands, the "+m" is required to avoid
undefined behavior on -O2 compilation.
Signed-off-by: Fabrice Desclaux <fabrice.desclaux@cea.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
03506cf0-a204-f619-8ee4-
4990a5e69af5@cea.fr>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Eric Blake [Fri, 7 Dec 2018 17:07:33 +0000 (11:07 -0600)]
maint: Grammar fix to mailmap
Make the sentence read better.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <
20181207170733.129532-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fam Zheng [Wed, 21 Nov 2018 15:30:36 +0000 (23:30 +0800)]
MAINTAINERS: Update email address for Fam Zheng
Since I am about to change company, update the email address in
MAINTAINERS to my personal one. Depending on responsibility changes I
may eventually fade out in some of the maintained areas, but that will
be figured out afterward, or maybe I'll use the work email later. For
now, just do a search and replace.
Signed-off-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181121153036.2941-1-famz@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Eric Blake [Thu, 6 Dec 2018 15:18:56 +0000 (09:18 -0600)]
cutils: Assert in-range base for string-to-integer conversions
POSIX states that the value of endptr is unspecified if strtol()
fails with EINVAL due to an invalid base argument. Since none of
the callers to check_strtox_error() initialized endptr, we could
end up propagating uninitialized data back to a caller on error.
However, passing an out-of-range base is already a sign of poor
programming, so let's just assert that base is in range, at which
point check_strtox_error() can be tightened to assert that it is
receiving an initialized ep that points somewhere within the
caller's original string, regardless of whether strto*() succeeded
or failed with ERANGE.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181206151856.77503-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Li Qiang [Fri, 30 Nov 2018 09:53:58 +0000 (01:53 -0800)]
util: vfio-helpers: use ARRAY_SIZE in qemu_vfio_init_pci()
Cc: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1543571638-2892-1-git-send-email-liq3ea@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Li Qiang [Tue, 27 Nov 2018 10:00:12 +0000 (02:00 -0800)]
target: hax: fix errors in comment
Cc: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1543312812-2929-1-git-send-email-liq3ea@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:59 +0000 (21:49 +0100)]
MAINTAINERS: Use my work email to review Build and test automation patches
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20181125205000.10324-25-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:56 +0000 (21:49 +0100)]
MAINTAINERS: Add a missing entry for the NVDIMM device
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20181125205000.10324-22-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:54 +0000 (21:49 +0100)]
MAINTAINERS: Add a missing entry to the QMP section
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20181125205000.10324-20-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:52 +0000 (21:49 +0100)]
MAINTAINERS: Add a missing entry to SPICE
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20181125205000.10324-18-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:51 +0000 (21:49 +0100)]
MAINTAINERS: Add missing entries for the MPS2 machine
Missed in
de343bb632a.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20181125205000.10324-17-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:50 +0000 (21:49 +0100)]
MAINTAINERS: Add missing entries for the Canon DIGIC machine
This pattern now also matches:
- include/hw/timer/digic-timer.h
- include/hw/char/digic-uart.h
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <
20181125205000.10324-16-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:49 +0000 (21:49 +0100)]
MAINTAINERS: Add missing entries to the vhost section
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20181125205000.10324-15-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:47 +0000 (21:49 +0100)]
MAINTAINERS: Add missing entries to the PC Chipset section
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <
20181125205000.10324-13-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:44 +0000 (21:49 +0100)]
MAINTAINERS: Add a missing entry for the sun4m machines
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20181125205000.10324-10-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:43 +0000 (21:49 +0100)]
MAINTAINERS: Add a missing entry for the Old World machines
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20181125205000.10324-9-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:41 +0000 (21:49 +0100)]
MAINTAINERS: Add a missing entry for the Xilinx S3A-DSP 1800 machine
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
20181125205000.10324-7-philmd@redhat.com>
[lv: added the missing 'F:' field]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:40 +0000 (21:49 +0100)]
MAINTAINERS: Add missing entries for the Jazz machine
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Message-Id: <
20181125205000.10324-6-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Philippe Mathieu-Daudé [Sun, 25 Nov 2018 20:49:39 +0000 (21:49 +0100)]
MAINTAINERS: Add missing entries for the Xilinx ZynqMP machine
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <
20181125205000.10324-5-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>