8021q: fix a memory leak for VLAN 0 device

[ Upstream commit 78bbb15f2239bc8e663aa20bbe1987c91a0b75f6 ]

A vlan device with vid 0 is allow to creat by not able to be fully
cleaned up by unregister_vlan_dev() which checks for vlan_id!=0.

Also, VLAN 0 is probably not a valid number and it is kinda
"reserved" for HW accelerating devices, but it is probably too
late to reject it from creation even if makes sense. Instead,
just remove the check in unregister_vlan_dev().

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)")
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/acpi: Reduce code duplication in mp_override_legacy_irq()

commit 4ee2ec1b122599f7b10c849fa7915cebb37b7edb upstream.

The new function mp_register_ioapic_irq() is a subset of the code in
mp_override_legacy_irq().

Replace the code duplication by invoking mp_register_ioapic_irq() from
mp_override_legacy_irq().

Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: kkamagui@gmail.com
Cc: linux-acpi@vger.kernel.org
Link: https://lkml.kernel.org/r/1510848825-21965-3-git-send-email-vikas.cha.sajjan@hpe.com
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: aloop: Fix racy hw constraints adjustment

commit 898dfe4687f460ba337a01c11549f87269a13fa2 upstream.

The aloop driver tries to update the hw constraints of the connected
target on the cable of the opened PCM substream.  This is done by
adding the extra hw constraints rules referring to the substream
runtime->hw fields, while the other substream may update the runtime
hw of another side on the fly.

This is, however, racy and may result in the inconsistent values when
both PCM streams perform the prepare concurrently.  One of the reason
is that it overwrites the other's runtime->hw field; which is not only
racy but also broken when it's called before the open of another side
finishes.  And, since the reference to runtime->hw isn't protected,
the concurrent write may give the partial value update and become
inconsistent.

This patch is an attempt to fix and clean up:
- The prepare doesn't change the runtime->hw of other side any longer,
  but only update the cable->hw that is referred commonly.
- The extra rules refer to the loopback_pcm object instead of the
  runtime->hw.  The actual hw is deduced from cable->hw.
- The extra rules take the cable_lock to protect against the race.

Fixes: b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: aloop: Fix inconsistent format due to incomplete rule

commit b088b53e20c7d09b5ab84c5688e609f478e5c417 upstream.

The extra hw constraint rule for the formats the aloop driver
introduced has a slight flaw, where it doesn't return a positive value
when the mask got changed.  It came from the fact that it's basically
a copy&paste from snd_hw_constraint_mask64().  The original code is
supposed to be a single-shot and it modifies the mask bits only once
and never after, while what we need for aloop is the dynamic hw rule
that limits the mask bits.

This difference results in the inconsistent state, as the hw_refine
doesn't apply the dependencies fully.  The worse and surprisingly
result is that it causes a crash in OSS emulation when multiple
full-duplex reads/writes are performed concurrently (I leave why it
triggers Oops to readers as a homework).

For fixing this, replace a few open-codes with the standard
snd_mask_*() macros.

Reported-by: syzbot+3902b5220e8ca27889ca@syzkaller.appspotmail.com
Fixes: b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: aloop: Release cable upon open error path

commit 9685347aa0a5c2869058ca6ab79fd8e93084a67f upstream.

The aloop runtime object and its assignment in the cable are left even
when opening a substream fails.  This doesn't mean any memory leak,
but it still keeps the invalid pointer that may be referred by the
another side of the cable spontaneously, which is a potential Oops
cause.

Clean up the cable assignment and the empty cable upon the error path
properly.

Fixes: 597603d615d2 ("ALSA: introduce the snd-aloop module for the PCM loopback")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Allow aborting mutex lock at OSS read/write loops

commit 900498a34a3ac9c611e9b425094c8106bdd7dc1c upstream.

PCM OSS read/write loops keep taking the mutex lock for the whole
read/write, and this might take very long when the exceptionally high
amount of data is given.  Also, since it invokes with mutex_lock(),
the concurrent read/write becomes unbreakable.

This patch tries to address these issues by replacing mutex_lock()
with mutex_lock_interruptible(), and also splits / re-takes the lock
at each read/write period chunk, so that it can switch the context
more finely if requested.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Abort properly at pending signal in OSS read/write loops

commit 29159a4ed7044c52e3e2cf1a9fb55cec4745c60b upstream.

The loops for read and write in PCM OSS emulation have no proper check
of pending signals, and they keep processing even after user tries to
break.  This results in a very long delay, often seen as RCU stall
when a huge unprocessed bytes remain queued.  The bug could be easily
triggered by syzkaller.

As a simple workaround, this patch adds the proper check of pending
signals and aborts the loop appropriately.

Reported-by: syzbot+993cb4cfcbbff3947c21@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Add missing error checks in OSS emulation plugin builder

commit 6708913750344a900f2e73bfe4a4d6dbbce4fe8d upstream.

In the OSS emulation plugin builder where the frame size is parsed in
the plugin chain, some places miss the possible errors returned from
the plugin src_ or dst_frames callback.

This patch papers over such places.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Workaround for weird PulseAudio behavior on rewind error

commit fb51f1cd06f9ced7b7085a2a4636375d520431ca upstream.

The commit 9027c4639ef1 ("ALSA: pcm: Call ack() whenever appl_ptr is
updated") introduced the possible error code returned from the PCM
rewind ioctl.  Basically the change was for handling the indirect PCM
more correctly, but ironically, it caused rather a side-effect:
PulseAudio gets pissed off when receiving an error from rewind, throws
everything away and stops processing further, resulting in the
silence.

It's clearly a failure in the application side, so the best would be
to fix that bug in PA.  OTOH, PA is mostly the only user of the rewind
feature, so it's not good to slap the sole customer.

This patch tries to mitigate the situation: instead of returning an
error, now the rewind ioctl returns zero when the driver can't rewind.
It indicates that no rewind was performed, so the behavior is
consistent, at least.

Fixes: 9027c4639ef1 ("ALSA: pcm: Call ack() whenever appl_ptr is updated")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Remove incorrect snd_BUG_ON() usages

commit fe08f34d066f4404934a509b6806db1a4f700c86 upstream.

syzkaller triggered kernel warnings through PCM OSS emulation at
closing a stream:
  WARNING: CPU: 0 PID: 3502 at sound/core/pcm_lib.c:1635
  snd_pcm_hw_param_first+0x289/0x690 sound/core/pcm_lib.c:1635
  Call Trace:
  ....
   snd_pcm_hw_param_near.constprop.27+0x78d/0x9a0 sound/core/oss/pcm_oss.c:457
   snd_pcm_oss_change_params+0x17d3/0x3720 sound/core/oss/pcm_oss.c:969
   snd_pcm_oss_make_ready+0xaa/0x130 sound/core/oss/pcm_oss.c:1128
   snd_pcm_oss_sync+0x257/0x830 sound/core/oss/pcm_oss.c:1638
   snd_pcm_oss_release+0x20b/0x280 sound/core/oss/pcm_oss.c:2431
   __fput+0x327/0x7e0 fs/file_table.c:210
   ....

This happens while it tries to open and set up the aloop device
concurrently.  The warning above (invoked from snd_BUG_ON() macro) is
to detect the unexpected logical error where snd_pcm_hw_refine() call
shouldn't fail.  The theory is true for the case where the hw_params
config rules are static.  But for an aloop device, the hw_params rule
condition does vary dynamically depending on the connected target;
when another device is opened and changes the parameters, the device
connected in another side is also affected, and it caused the error
from snd_pcm_hw_refine().

That is, the simplest "solution" for this is to remove the incorrect
assumption of static rules, and treat such an error as a normal error
path.  As there are a couple of other places using snd_BUG_ON()
incorrectly, this patch removes these spurious snd_BUG_ON() calls.

Reported-by: syzbot+6f11c7e2a1b91d466432@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/acpi: Handle SCI interrupts above legacy space gracefully

commit 252714155f04c5d16989cb3aadb85fd1b5772f99 upstream.

Platforms which support only IOAPIC mode, pass the SCI information above
the legacy space (0-15) via the FADT mechanism and not via MADT.

In such cases mp_override_legacy_irq() which is invoked from
acpi_sci_ioapic_setup() to register SCI interrupts fails for interrupts
greater equal 16, since it is meant to handle only the legacy space and
emits error "Invalid bus_irq %u for legacy override".

Add a new function to handle SCI interrupts >= 16 and invoke it
conditionally in acpi_sci_ioapic_setup().

The code duplication due to this new function will be cleaned up in a
separate patch.

Co-developed-by: Sunil V L <sunil.vl@hpe.com>
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Signed-off-by: Sunil V L <sunil.vl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Abdul Lateef Attar <abdul-lateef.attar@hpe.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: kkamagui@gmail.com
Cc: linux-acpi@vger.kernel.org
Link: https://lkml.kernel.org/r/1510848825-21965-2-git-send-email-vikas.cha.sajjan@hpe.com
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iw_cxgb4: when flushing, complete all wrs in a chain

commit d14587334580bc94d3ee11e8320e0c157f91ae8f upstream.

If a wr chain was posted and needed to be flushed, only the first
wr in the chain was completed with FLUSHED status.  The rest were
never completed.  This caused isert to hang on shutdown due to the
missing completions which left iscsi IO commands referenced, stalling
the shutdown.

Fixes: 4fe7c2962e11 ("iw_cxgb4: refactor sq/rq drain logic")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iw_cxgb4: reflect the original WR opcode in drain cqes

commit 96a236ed286776554fbd227c6d2876fd3b5dc65d upstream.

The flush/drain logic was not retaining the original wr opcode in
its completion.  This can cause problems if the application uses
the completion opcode to make decisions.

Use bit 10 of the CQE header word to indicate the CQE is a special
drain completion, and save the original WR opcode in the cqe header
opcode field.

Fixes: 4fe7c2962e11 ("iw_cxgb4: refactor sq/rq drain logic")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iw_cxgb4: only clear the ARMED bit if a notification is needed

commit 335ebf6fa35ca1c59b73f76fad19b249d3550e86 upstream.

In __flush_qp(), the CQ ARMED bit was being cleared regardless of
whether any notification is actually needed.  This resulted in the iser
termination logic getting stuck in ib_drain_sq() because the CQ was not
marked ARMED and thus the drain CQE notification wasn't triggered.

This new bug was exposed when this commit was merged:

commit cbb40fadd31c ("iw_cxgb4: only call the cq comp_handler when the
cq is armed")

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iw_cxgb4: atomically flush the qp

commit bc52e9ca74b9a395897bb640c6671b2cbf716032 upstream.

__flush_qp() has a race condition where during the flush operation,
the qp lock is released allowing another thread to possibly post a WR,
which corrupts the queue state, possibly causing crashes.  The lock was
released to preserve the cq/qp locking hierarchy of cq first, then qp.
However releasing the qp lock is not necessary; both RQ and SQ CQ locks
can be acquired first, followed by the qp lock, and then the RQ and SQ
flushing can be done w/o unlocking.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iw_cxgb4: only call the cq comp_handler when the cq is armed

commit cbb40fadd31c6bbc59104e58ac95c6ef492d038b upstream.

The ULPs completion handler should only be called if the CQ is
armed for notification.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: wmi: Call acpi_wmi_init() later

commit 98b8e4e5c17bf87c1b18ed929472051dab39878c upstream.

Calling acpi_wmi_init() at the subsys_initcall() level causes ordering
issues to appear on some systems and they are difficult to reproduce,
because there is no guaranteed ordering between subsys_initcall()
calls, so they may occur in different orders on different systems.

In particular, commit 86d9f48534e8 (mm/slab: fix kmemcg cache
creation delayed issue) exposed one of these issues where genl_init()
and acpi_wmi_init() are both called at the same initcall level, but
the former must run before the latter so as to avoid a NULL pointer
dereference.

For this reason, move the acpi_wmi_init() invocation to the
initcall_sync level which should still be early enough for things
to work correctly in the WMI land.

Link: https://marc.info/?t=151274596700002&r=1&w=2
Reported-by: Jonathan McDowell <noodles@earth.li>
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: vmx: Scrub hardware GPRs at VM-exit

commit 0cb5b30698fdc8f6b4646012e3acb4ddce430788 upstream.

Guest GPR values are live in the hardware GPRs at VM-exit.  Do not
leave any guest values in hardware GPRs after the guest GPR values are
saved to the vcpu_vmx structure.

This is a partial mitigation for CVE 2017-5715 and CVE 2017-5753.
Specifically, it defeats the Project Zero PoC for CVE 2017-5715.

Suggested-by: Eric Northup <digitaleric@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Eric Northup <digitaleric@google.com>
Reviewed-by: Benjamin Serebrin <serebrin@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
[Paolo: Add AMD bits, Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: fix css_task_iter crash on CSS_TASK_ITER_PROC

commit 74d0833c659a8a54735e5efdd44f4b225af68586 upstream.

While teaching css_task_iter to handle skipping over tasks which
aren't group leaders, bc2fb7ed089f ("cgroup: add @flags to
css_task_iter_start() and implement CSS_TASK_ITER_PROCS") introduced a
silly bug.

CSS_TASK_ITER_PROCS is implemented by repeating
css_task_iter_advance() while the advanced cursor is pointing to a
non-leader thread.  However, the cursor variable, @l, wasn't updated
when the iteration has to advance to the next css_set and the
following repetition would operate on the terminal @l from the
previous iteration which isn't pointing to a valid task leading to
oopses like the following or infinite looping.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000254
  IP: __task_pid_nr_ns+0xc7/0xf0
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP
  ...
  CPU: 2 PID: 1 Comm: systemd Not tainted 4.14.4-200.fc26.x86_64 #1
  Hardware name: System manufacturer System Product Name/PRIME B350M-A, BIOS 3203 11/09/2017
  task: ffff88c4baee8000 task.stack: ffff96d5c3158000
  RIP: 0010:__task_pid_nr_ns+0xc7/0xf0
  RSP: 0018:ffff96d5c315bd50 EFLAGS: 00010206
  RAX: 0000000000000000 RBX: ffff88c4b68c6000 RCX: 0000000000000250
  RDX: ffffffffa5e47960 RSI: 0000000000000000 RDI: ffff88c490f6ab00
  RBP: ffff96d5c315bd50 R08: 0000000000001000 R09: 0000000000000005
  R10: ffff88c4be006b80 R11: ffff88c42f1b8004 R12: ffff96d5c315bf18
  R13: ffff88c42d7dd200 R14: ffff88c490f6a510 R15: ffff88c4b68c6000
  FS:  00007f9446f8ea00(0000) GS:ffff88c4be680000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000254 CR3: 00000007f956f000 CR4: 00000000003406e0
  Call Trace:
   cgroup_procs_show+0x19/0x30
   cgroup_seqfile_show+0x4c/0xb0
   kernfs_seq_show+0x21/0x30
   seq_read+0x2ec/0x3f0
   kernfs_fop_read+0x134/0x180
   __vfs_read+0x37/0x160
   ? security_file_permission+0x9b/0xc0
   vfs_read+0x8e/0x130
   SyS_read+0x55/0xc0
   entry_SYSCALL_64_fastpath+0x1a/0xa5
  RIP: 0033:0x7f94455f942d
  RSP: 002b:00007ffe81ba2d00 EFLAGS: 00000293 ORIG_RAX: 0000000000000000
  RAX: ffffffffffffffda RBX: 00005574e2233f00 RCX: 00007f94455f942d
  RDX: 0000000000001000 RSI: 00005574e2321a90 RDI: 000000000000002b
  RBP: 0000000000000000 R08: 00005574e2321a90 R09: 00005574e231de60
  R10: 00007f94458c8b38 R11: 0000000000000293 R12: 00007f94458c8ae0
  R13: 00007ffe81ba3800 R14: 0000000000000000 R15: 00005574e2116560
  Code: 04 74 0e 89 f6 48 8d 04 76 48 8d 04 c5 f0 05 00 00 48 8b bf b8 05 00 00 48 01 c7 31 c0 48 8b 0f 48 85 c9 74 18 8b b2 30 08 00 00 <3b> 71 04 77 0d 48 c1 e6 05 48 01 f1 48 3b 51 38 74 09 5d c3 8b
  RIP: __task_pid_nr_ns+0xc7/0xf0 RSP: ffff96d5c315bd50

Fix it by moving the initialization of the cursor below the repeat
label.  While at it, rename it to @next for readability.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: bc2fb7ed089f ("cgroup: add @flags to css_task_iter_start() and implement CSS_TASK_ITER_PROCS")
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Bronek Kozicki <brok@incorrekt.com>
Reported-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accesses

commit c8c5a3a24d395b14447a9a89d61586a913840a3b upstream.

Complement commit c23b3d1a5311 ("MIPS: ptrace: Change GP regset to use
correct core dump register layout") and also reject outsized
PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the
NT_PRSTATUS regset.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: c23b3d1a5311 ("MIPS: ptrace: Change GP regset to use correct core dump register layout")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17930/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSET

commit 006501e039eec411842bb3150c41358867d320c2 upstream.

Complement commit d614fd58a283 ("mips/ptrace: Preserve previous
registers for short regset write") and like with the PTRACE_GETREGSET
ptrace(2) request also apply a BUILD_BUG_ON check for the size of the
`elf_fpreg_t' type in the PTRACE_SETREGSET request handler.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17929/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSA

commit be07a6a1188372b6d19a3307ec33211fc9c9439d upstream.

Fix a commit 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for
FP regset") public API regression, then activated by commit 1db1af84d6df
("MIPS: Basic MSA context switching support"), that caused the FCSR
register not to be read or written for CONFIG_CPU_HAS_MSA kernel
configurations (regardless of actual presence or absence of the MSA
feature in a given processor) with ptrace(2) PTRACE_GETREGSET and
PTRACE_SETREGSET requests nor recorded in core dumps.

This is because with !CONFIG_CPU_HAS_MSA configurations the whole of
`elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR
in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA
configurations array elements are copied individually, and then only the
leading 32 FGR slots while the remaining slot is ignored.

Correct the code then such that only FGR slots are copied in the
respective !MSA and MSA helpers an then the FCSR slot is handled
separately in common code.  Use `ptrace_setfcr31' to update the FCSR
too, so that the read-only mask is respected.

Retrieving a correct value of FCSR is important in debugging not only
for the human to be able to get the right interpretation of the
situation, but for correct operation of GDB as well.  This is because
the condition code bits in FSCR are used by GDB to determine the
location to place a breakpoint at when single-stepping through an FPU
branch instruction.  If such a breakpoint is placed incorrectly (i.e.
with the condition reversed), then it will be missed, likely causing the
debuggee to run away from the control of GDB and consequently breaking
the process of investigation.

Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2)
request which is unaffected, so the regression only really hits with
post-mortem debug sessions using a core dump file, in which case
execution, and consequently single-stepping through branches is not
possible.  Of course core files created by buggy kernels out there will
have the value of FCSR recorded clobbered, but such core files cannot be
corrected and the person using them simply will have to be aware that
the value of FCSR retrieved is not reliable.

Which also means we can likely get away without defining a replacement
API which would ensure a correct value of FSCR to be retrieved, or none
at all.

This is based on previous work by Alex Smith, extensively rewritten.

Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Consistently handle buffer counter with PTRACE_SETREGSET

commit 80b3ffce0196ea50068885d085ff981e4b8396f4 upstream.

Update commit d614fd58a283 ("mips/ptrace: Preserve previous registers
for short regset write") bug and consistently consume all data supplied
to `fpr_set_msa' with the ptrace(2) PTRACE_SETREGSET request, such that
a zero data buffer counter is returned where insufficient data has been
given to fill a whole number of FP general registers.

In reality this is not going to happen, as the caller is supposed to
only supply data covering a whole number of registers and it is verified
in `ptrace_regset' and again asserted in `fpr_set', however structuring
code such that the presence of trailing partial FP general register data
causes `fpr_set_msa' to return with a non-zero data buffer counter makes
it appear that this trailing data will be used if there are subsequent
writes made to FP registers, which is going to be the case with the FCSR
once the missing write to that register has been fixed.

Fixes: d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17927/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Guard against any partial write attempt with PTRACE_SETREGSET

commit dc24d0edf33c3e15099688b6bbdf7bdc24bf6e91 upstream.

Complement commit d614fd58a283 ("mips/ptrace: Preserve previous
registers for short regset write") and ensure that no partial register
write attempt is made with PTRACE_SETREGSET, as we do not preinitialize
any temporaries used to hold incoming register data and consequently
random data could be written.

It is the responsibility of the caller, such as `ptrace_regset', to
arrange for writes to span whole registers only, so here we only assert
that it has indeed happened.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17926/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Factor out NT_PRFPREG regset access helpers

commit a03fe72572c12e98f4173f8a535f32468e48b6ec upstream.

In preparation to fix a commit 72b22bbad1e7 ("MIPS: Don't assume 64-bit
FP registers for FP regset") FCSR access regression factor out
NT_PRFPREG regset access helpers for the non-MSA and the MSA variants
respectively, to avoid having to deal with excessive indentation in the
actual fix.

No functional change, however use `target->thread.fpu.fpr[0]' rather
than `target->thread.fpu.fpr[i]' for FGR holding type size determination
as there's no `i' variable to refer to anymore, and for the factored out
`i' variable declaration use `unsigned int' rather than `unsigned' as
its type, following the common style.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17925/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Validate PR_SET_FP_MODE prctl(2) requests against the ABI of the task

commit b67336eee3fcb8ecedc6c13e2bf88aacfa3151e2 upstream.

Fix an API loophole introduced with commit 9791554b45a2 ("MIPS,prctl:
add PR_[GS]ET_FP_MODE prctl options for MIPS"), where the caller of
prctl(2) is incorrectly allowed to make a change to CP0.Status.FR or
CP0.Config5.FRE register bits even if CONFIG_MIPS_O32_FP64_SUPPORT has
not been enabled, despite that an executable requesting the mode
requested via ELF file annotation would not be allowed to run in the
first place, or for n64 and n64 ABI tasks which do not have non-default
modes defined at all.  Add suitable checks to `mips_set_process_fp_mode'
and bail out if an invalid mode change has been requested for the ABI in
effect, even if the FPU hardware or emulation would otherwise allow it.

Always succeed however without taking any further action if the mode
requested is the same as one already in effect, regardless of whether
any mode change, should it be requested, would actually be allowed for
the task concerned.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Reviewed-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17800/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/srpt: Fix ACL lookup during login

commit a1ffa4670cb97ae3a4b3e8535d88be5f643f7c3b upstream.

Make sure that the initiator port GUID is stored in ch->ini_guid.
Note: when initiating a connection sgid and dgid members in struct
sa_path_rec represent the source and destination GIDs. When accepting
a connection however sgid represents the destination GID and dgid the
source GID.

Fixes: commit 2bce1a6d2209 ("IB/srpt: Accept GUIDs as port names")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/srpt: Disable RDMA access by the initiator

commit bec40c26041de61162f7be9d2ce548c756ce0f65 upstream.

With the SRP protocol all RDMA operations are initiated by the target.
Since no RDMA operations are initiated by the initiator, do not grant
the initiator permission to submit RDMA reads or writes to the target.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: gs_usb: fix return value of the "set_bittiming" callback

commit d5b42e6607661b198d8b26a0c30969605b1bf5c7 upstream.

The "set_bittiming" callback treats a positive return value as error!
For that reason "can_changelink()" will quit silently after setting
the bittiming values without processing ctrlmode, restart-ms, etc.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: vxcan: improve handling of missing peer name attribute

commit b4c2951a4833e66f1bbfe65ddcd4fdcdfafe5e8f upstream.

Picking up the patch from Serhey Popovych (commit 191cdb3822e5df6b3c8,
"veth: Be more robust on network device creation when no attributes").

When the peer name attribute is not provided the former implementation tries
to register the given device name twice ... which leads to -EEXIST.
If only one device name is given apply an automatic generated and valid name
for the peer.

Cc: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Fix stack-out-of-bounds read in write_mmio

commit e39d200fa5bf5b94a0948db0dae44c1b73b84a56 upstream.

Reported by syzkaller:

  BUG: KASAN: stack-out-of-bounds in write_mmio+0x11e/0x270 [kvm]
  Read of size 8 at addr ffff8803259df7f8 by task syz-executor/32298

  CPU: 6 PID: 32298 Comm: syz-executor Tainted: G           OE    4.15.0-rc2+ #18
  Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016
  Call Trace:
   dump_stack+0xab/0xe1
   print_address_description+0x6b/0x290
   kasan_report+0x28a/0x370
   write_mmio+0x11e/0x270 [kvm]
   emulator_read_write_onepage+0x311/0x600 [kvm]
   emulator_read_write+0xef/0x240 [kvm]
   emulator_fix_hypercall+0x105/0x150 [kvm]
   em_hypercall+0x2b/0x80 [kvm]
   x86_emulate_insn+0x2b1/0x1640 [kvm]
   x86_emulate_instruction+0x39a/0xb90 [kvm]
   handle_exception+0x1b4/0x4d0 [kvm_intel]
   vcpu_enter_guest+0x15a0/0x2640 [kvm]
   kvm_arch_vcpu_ioctl_run+0x549/0x7d0 [kvm]
   kvm_vcpu_ioctl+0x479/0x880 [kvm]
   do_vfs_ioctl+0x142/0x9a0
   SyS_ioctl+0x74/0x80
   entry_SYSCALL_64_fastpath+0x23/0x9a

The path of patched vmmcall will patch 3 bytes opcode 0F 01 C1(vmcall)
to the guest memory, however, write_mmio tracepoint always prints 8 bytes
through *(u64 *)val since kvm splits the mmio access into 8 bytes. This
leaks 5 bytes from the kernel stack (CVE-2017-17741).  This patch fixes
it by just accessing the bytes which we operate on.

Before patch:

syz-executor-5567  [007] .... 51370.561696: kvm_mmio: mmio write len 3 gpa 0x10 val 0x1ffff10077c1010f

After patch:

syz-executor-13416 [002] .... 51302.299573: kvm_mmio: mmio write len 3 gpa 0x10 val 0xc1010f

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm bufio: fix shrinker scans when (nr_to_scan < retain_target)

commit fbc7c07ec23c040179384a1f16b62b6030eb6bdd upstream.

When system is under memory pressure it is observed that dm bufio
shrinker often reclaims only one buffer per scan. This change fixes
the following two issues in dm bufio shrinker that cause this behavior:

1. ((nr_to_scan - freed) <= retain_target) condition is used to
terminate slab scan process. This assumes that nr_to_scan is equal
to the LRU size, which might not be correct because do_shrink_slab()
in vmscan.c calculates nr_to_scan using multiple inputs.
As a result when nr_to_scan is less than retain_target (64) the scan
will terminate after the first iteration, effectively reclaiming one
buffer per scan and making scans very inefficient. This hurts vmscan
performance especially because mutex is acquired/released every time
dm_bufio_shrink_scan() is called.
New implementation uses ((LRU size - freed) <= retain_target)
condition for scan termination. LRU size can be safely determined
inside __scan() because this function is called after dm_bufio_lock().

2. do_shrink_slab() uses value returned by dm_bufio_shrink_count() to
determine number of freeable objects in the slab. However dm_bufio
always retains retain_target buffers in its LRU and will terminate
a scan when this mark is reached. Therefore returning the entire LRU size
from dm_bufio_shrink_count() is misleading because that does not
represent the number of freeable objects that slab will reclaim during
a scan. Returning (LRU size - retain_target) better represents the
number of freeable objects in the slab. This way do_shrink_slab()
returns 0 when (LRU size < retain_target) and vmscan will not try to
scan this shrinker avoiding scans that will not reclaim any memory.

Test: tested using Android device running
<AOSP>/system/extras/alloc-stress that generates memory pressure
and causes intensive shrinker scans

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.13

KVM: s390: prevent buffer overrun on memory hotplug during migration

commit c2cf265d860882b51a200e4a7553c17827f2b730 upstream.

We must not go beyond the pre-allocated buffer. This can happen when
a new memory slot is added during migration.

Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 190df4a212a7 (KVM: s390: CMMA tracking, ESSA emulation, migration mode)
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: fix cmma migration for multiple memory slots

commit 32aa144fc32abfcbf7140f473dfbd94c5b9b4105 upstream.

When multiple memory slots are present the cmma migration code
does not allocate enough memory for the bitmap. The memory slots
are sorted in reverse order, so we must use gfn and size of
slot[0] instead of the last one.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Fixes: 190df4a212a7 (KVM: s390: CMMA tracking, ESSA emulation, migration mode)
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: pxa3xx: Fix READOOB implementation

commit fee4380f368e84ed216b62ccd2fbc4126f2bf40b upstream.

In the current driver, OOB bytes are accessed in raw mode, and when a
page access is done with NDCR_SPARE_EN set and NDCR_ECC_EN cleared, the
driver must read the whole spare area (64 bytes in case of a 2k page,
16 bytes for a 512 page). The driver was only reading the free OOB
bytes, which was leaving some unread data in the FIFO and was somehow
leading to a timeout.

We could patch the driver to read ->spare_size + ->ecc_size instead of
just ->spare_size when READOOB is requested, but we'd better make
in-band and OOB accesses consistent.
Since the driver is always accessing in-band data in non-raw mode (with
the ECC engine enabled), we should also access OOB data in this mode.
That's particularly useful when using the BCH engine because in this
mode the free OOB bytes are also ECC protected.

Fixes: 43bcfd2bb24a ("mtd: nand: pxa3xx: Add driver-specific ECC BCH support")
Reported-by: Sean Nyekjær <sean.nyekjaer@prevas.dk>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: qemu idle sleep support

commit 310d82784fb4d60c80569f5ca9f53a7f3bf1d477 upstream.

Add qemu idle sleep support when running under qemu with SeaBIOS PDC
firmware.

Like the power architecture we use the "or" assembler instructions,
which translate to nops on real hardware, to indicate that qemu shall
idle sleep.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel

commit 88776c0e70be0290f8357019d844aae15edaa967 upstream.

Qemu for PARISC reported on a 32bit SMP parisc kernel strange failures
about "Not-handled unaligned insn 0x0e8011d6 and 0x0c2011c9."

Those opcodes evaluate to the ldcw() assembly instruction which requires
(on 32bit) an alignment of 16 bytes to ensure atomicity.

As it turns out, qemu is correct and in our assembly code in entry.S and
pacache.S we don't pay attention to the required alignment.

This patch fixes the problem by aligning the lock offset in assembly
code in the same manner as we do in our C-code.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apparmor: fix regression in mount mediation when feature set is pinned

commit 5b9f57cf47b87f07210875d6a24776b4496b818d upstream.

When the mount code was refactored for Labels it was not correctly
updated to check whether policy supported mediation of the mount
class.  This causes a regression when the kernel feature set is
reported as supporting mount and policy is pinned to a feature set
that does not support mount mediation.

BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882697#41
Fixes: 2ea3ffb7782a ("apparmor: add mount mediation")
Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/AMD: Add support for fam17h microcode loading

commit f4e9b7af0cd58dd039a0fb2cd67d57cea4889abf upstream.

The size for the Microcode Patch Block (MPB) for an AMD family 17h
processor is 3200 bytes.  Add a #define for fam17h so that it does
not default to 2048 bytes and fail a microcode load/update.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171130224640.15391.40247.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alice Ferrazzi <alicef@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - add new icbody type 15

commit 10d900303f1c3a821eb0bef4e7b7ece16768fba4 upstream.

The touchpad of Lenovo Thinkpad L480 reports it's version as 15.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR

commit ecb101aed86156ec7cd71e5dca668e09146e6994 upstream.

The recent refactoring of the powerpc page fault handler in commit
c3350602e876 ("powerpc/mm: Make bad_area* helper functions") caused
access to protected memory regions to indicate SEGV_MAPERR instead of
the traditional SEGV_ACCERR in the si_code field of a user-space
signal handler. This can confuse debug libraries that temporarily
change the protection of memory regions, and expect to use SEGV_ACCERR
as an indication to restore access to a region.

This commit restores the previous behavior. The following program
exhibits the issue:

    $ ./repro read  || echo "FAILED"
    $ ./repro write || echo "FAILED"
    $ ./repro exec  || echo "FAILED"

    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <unistd.h>
    #include <signal.h>
    #include <sys/mman.h>
    #include <assert.h>

    static void segv_handler(int n, siginfo_t *info, void *arg) {
            _exit(info->si_code == SEGV_ACCERR ? 0 : 1);
    }

    int main(int argc, char **argv)
    {
            void *p = NULL;
            struct sigaction act = {
                    .sa_sigaction = segv_handler,
                    .sa_flags = SA_SIGINFO,
            };

            assert(argc == 2);
            p = mmap(NULL, getpagesize(),
                    (strcmp(argv[1], "write") == 0) ? PROT_READ : 0,
                    MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
            assert(p != MAP_FAILED);

            assert(sigaction(SIGSEGV, &act, NULL) == 0);
            if (strcmp(argv[1], "read") == 0)
                    printf("%c", *(unsigned char *)p);
            else if (strcmp(argv[1], "write") == 0)
                    *(unsigned char *)p = 0;
            else if (strcmp(argv[1], "exec") == 0)
                    ((void (*)(void))p)();
            return 1;  /* failed to generate SEGV */
    }

Fixes: c3350602e876 ("powerpc/mm: Make bad_area* helper functions")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Add commit references in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: uaccess: dont use "l" gcc inline asm constraint modifier

commit 79435ac78d160e4c245544d457850a56f805ac0d upstream.

This used to setup the LP_COUNT register automatically, but now has been
removed.

There was an earlier fix 3c7c7a2fc8811 which fixed instance in delay.h but
somehow missed this one as gcc change had not made its way into
production toolchains and was not pedantic as it is now !

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-v3: Cope with duplicated Stream IDs

commit 563b5cbe334e9503ab2b234e279d500fc4f76018 upstream.

For PCI devices behind an aliasing PCIe-to-PCI/X bridge, the bridge
alias to DevFn 0.0 on the subordinate bus may match the original RID of
the device, resulting in the same SID being present in the device's
fwspec twice. This causes trouble later in arm_smmu_write_strtab_ent()
when we wind up visiting the STE a second time and find it already live.

Avoid the issue by giving arm_smmu_install_ste_for_dev() the cleverness
to skip over duplicates. It seems mildly counterintuitive compared to
preventing the duplicates from existing in the first place, but since
the DT and ACPI probe paths build their fwspecs differently, this is
actually the cleanest and most self-contained way to deal with it.

Fixes: 8f78515425da ("iommu/arm-smmu: Implement of_xlate() for SMMUv3")
Reported-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Tested-by: Jayachandran C. <jnair@caviumnetworks.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu-v3: Don't free page table ops twice

commit 57d72e159b60456c8bb281736c02ddd3164037aa upstream.

Kasan reports a double free when finalise_stage_fn fails: the io_pgtable
ops are freed by arm_smmu_domain_finalise and then again by
arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure.

Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in complete_signal()

commit 426915796ccaf9c2bd9bb06dc5702225957bc2e5 upstream.

complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy
the thread group, today this is wrong in many ways.

If nothing else, fatal_signal_pending() should always imply that the
whole thread group (except ->group_exit_task if it is not NULL) is
killed, this check breaks the rule.

After the previous changes we can rely on sig_task_ignored();
sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want
to kill this task and sig == SIGKILL OR it is traced and debugger can
intercept the signal.

This should hopefully fix the problem reported by Dmitry.  This
test-case

static int init(void *arg)
{
for (;;)
pause();
}

int main(void)
{
char stack[16 * 1024];

for (;;) {
int pid = clone(init, stack + sizeof(stack)/2,
CLONE_NEWPID | SIGCHLD, NULL);
assert(pid > 0);

assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0);
assert(waitpid(-1, NULL, WSTOPPED) == pid);

assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0);
assert(syscall(__NR_tkill, pid, SIGKILL) == 0);
assert(pid == wait(NULL));
}
}

triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in
task_participate_group_stop().  do_signal_stop()->signal_group_exit()
checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending()
checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING.

And his should fix the minor security problem reported by Kyle,
SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the
task is the root of a pid namespace.

Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Kyle Huey <me@kylehuey.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/signal.c: protect the SIGNAL_UNKILLABLE tasks from !sig_kernel_only() signals

commit ac25385089f673560867eb5179228a44ade0cfc1 upstream.

Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only()
signals even if force == T.  This simplifies the next change and this
matches the same check in get_signal() which will drop these signals
anyway.

Link: http://lkml.kernel.org/r/20171103184227.GC21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILL

commit 628c1bcba204052d19b686b5bac149a644cdb72e upstream.

The comment in sig_ignored() says "Tracers may want to know about even
ignored signals" but SIGKILL can not be reported to debugger and it is
just wrong to return 0 in this case: SIGKILL should only kill the
SIGNAL_UNKILLABLE task if it comes from the parent ns.

Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on
sig_task_ignored().

SISGTOP coming from within the namespace is not really right too but at
least debugger can intercept it, and we can't drop it here because this
will break "gdb -p 1": ptrace_attach() won't work.  Perhaps we will add
another ->ptrace check later, we will see.

Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86 / CPU: Always show current CPU frequency in /proc/cpuinfo

commit 7d5905dc14a87805a59f3c5bf70173aac2bb18f8 upstream.

After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get()
for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo
on x86 can be either the nominal CPU frequency (which is constant)
or the frequency most recently requested by a scaling governor in
cpufreq, depending on the cpufreq configuration.  That is somewhat
inconsistent and is different from what it was before 4.13, so in
order to restore the previous behavior, make it report the current
CPU frequency like the scaling_cur_freq sysfs file in cpufreq.

To that end, modify the /proc/cpuinfo implementation on x86 to use
aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback
registers, if available, and use their values to compute the CPU
frequency to be reported as "cpu MHz".

However, do that carefully enough to avoid accumulating delays that
lead to unacceptable access times for /proc/cpuinfo on systems with
many CPUs.  Run aperfmperf_snapshot_khz() once on all CPUs
asynchronously at the /proc/cpuinfo open time, add a single delay
upfront (if necessary) at that point and simply compute the current
frequency while running show_cpuinfo() for each individual CPU.

Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce
the default delay between consecutive APERF and MPERF reads to 10 ms,
which should be sufficient to get large enough numbers for the
frequency computation in all cases.

Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86 / CPU: Avoid unnecessary IPIs in arch_freq_get_on_cpu()

commit b29c6ef7bb1257853c1e31616d84f55e561cf631 upstream.

Even though aperfmperf_snapshot_khz() caches the samples.khz value to
return if called again in a sufficiently short time, its caller,
arch_freq_get_on_cpu(), still uses smp_call_function_single() to run it
which may allow user space to trigger an IPI storm by reading from the
scaling_cur_freq cpufreq sysfs file in a tight loop.

To avoid that, move the decision on whether or not to return the cached
samples.khz value to arch_freq_get_on_cpu().

This change was part of commit 941f5f0f6ef5 ("x86: CPU: Fix up "cpu MHz"
in /proc/cpuinfo"), but it was not the reason for the revert and it
remains applicable.

Fixes: 4815d3c56d1e (cpufreq: x86: Make scaling_cur_freq behave more as expected)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: WANG Chao <chao.wang@ucloud.cn>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscache: Fix the default for fscache_maybe_release_page()

commit 98801506552593c9b8ac11021b0cdad12cab4f6b upstream.

Fix the default for fscache_maybe_release_page() for when the cookie isn't
valid or the page isn't cached.  It mustn't return false as that indicates
the page cannot yet be freed.

The problem with the default is that if, say, there's no cache, but a
network filesystem's pages are using up almost all the available memory, a
system can OOM because the filesystem ->releasepage() op will not allow
them to be released as fscache_maybe_release_page() incorrectly prevents
it.

This can be tested by writing a sequence of 512MiB files to an AFS mount.
It does not affect NFS or CIFS because both of those wrap the call in a
check of PG_fscache and it shouldn't bother Ceph as that only has
PG_private set whilst writeback is in progress.  This might be an issue for
9P, however.

Note that the pages aren't entirely stuck.  Removing a file or unmounting
will clear things because that uses ->invalidatepage() instead.

Fixes: 201a15428bd5 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunxi-rsb: Include OF based modalias in device uevent

commit e2bf801ecd4e62222a46d1ba9e57e710171d29c1 upstream.

Include the OF-based modalias in the uevent sent when registering devices
on the sunxi RSB bus, so that user space has a chance to autoload the
kernel module for the device.

Fixes a regression caused by commit 3f241bfa60bd ("arm64: allwinner: a64:
pine64: Use dcdc1 regulator for mmc0"). When the axp20x-rsb module for
the AXP803 PMIC is built as a module, it is not loaded and the system
ends up with an disfunctional MMC controller.

Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Apply Display WA #1183 on skl, kbl, and cfl

commit 30414f3010aff95ffdb6bed7b9dce62cde94fdc7 upstream.

Display WA #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
 enabling or in previous enabling."

This workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly, although
they were expecting the DPLL0 link rate to be unchanged on
runtime.

We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency with small
differences.

This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.

Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204232210.4958-1-lucas.demarchi@intel.com
(cherry picked from commit 53421c2fe99ce16838639ad89d772d914a119a49)
[ Lucas: Backport to 4.15 adding back variable that has been removed on
  commits not meant to be backported ]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102201837.6812-1-lucas.demarchi@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Disable DC states around GMBUS on GLK

commit 3488d0237f6364614f0c59d6d784bb79b11eeb92 upstream.

Prevent the DMC from destroying GMBUS transfers on GLK. GMBUS
lives in PG1 so DC off is all we need.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
(cherry picked from commit 156961ae7bdf6feb72778e8da83d321b273343fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: chelsio - select CRYPTO_GF128MUL

commit d042566d8c704e1ecec370300545d4a409222e39 upstream.

Without the gf128mul library support, we can run into a link
error:

drivers/crypto/chelsio/chcr_algo.o: In function `chcr_update_tweak':
chcr_algo.c:(.text+0x7e0): undefined reference to `gf128mul_x8_ble'

This adds a Kconfig select statement for it, next to the ones we
already have.

Fixes: b8fd1f4170e7 ("crypto: chcr - Add ctr mode and process large sg entries for cipher")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: pcrypt - fix freeing pcrypt instances

commit d76c68109f37cb85b243a1cf0f40313afd2bae68 upstream.

pcrypt is using the old way of freeing instances, where the ->free()
method specified in the 'struct crypto_template' is passed a pointer to
the 'struct crypto_instance'.  But the crypto_instance is being
kfree()'d directly, which is incorrect because the memory was actually
allocated as an aead_instance, which contains the crypto_instance at a
nonzero offset.  Thus, the wrong pointer was being kfree()'d.

Fix it by switching to the new way to free aead_instance's where the
->free() method is specified in the aead_instance itself.

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 0496f56065e0 ("crypto: pcrypt - Add support for new AEAD interface")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: chacha20poly1305 - validate the digest size

commit e57121d08c38dabec15cf3e1e2ad46721af30cae upstream.

If the rfc7539 template was instantiated with a hash algorithm with
digest size larger than 16 bytes (POLY1305_DIGEST_SIZE), then the digest
overran the 'tag' buffer in 'struct chachapoly_req_ctx', corrupting the
subsequent memory, including 'cryptlen'.  This caused a crash during
crypto_skcipher_decrypt().

Fix it by, when instantiating the template, requiring that the
underlying hash algorithm has the digest size expected for Poly1305.

Reproducer:

    #include <linux/if_alg.h>
    #include <sys/socket.h>
    #include <unistd.h>

    int main()
    {
            int algfd, reqfd;
            struct sockaddr_alg addr = {
                    .salg_type = "aead",
                    .salg_name = "rfc7539(chacha20,sha256)",
            };
            unsigned char buf[32] = { 0 };

            algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
            bind(algfd, (void *)&addr, sizeof(addr));
            setsockopt(algfd, SOL_ALG, ALG_SET_KEY, buf, sizeof(buf));
            reqfd = accept(algfd, 0, 0);
            write(reqfd, buf, 16);
            read(reqfd, buf, 16);
    }

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 71ebc4d1b27d ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: n2 - cure use after free

commit 203f45003a3d03eea8fa28d74cfc74c354416fdb upstream.

queue_cache_init is first called for the Control Word Queue
(n2_crypto_probe). At that time, queue_cache[0] is NULL and a new
kmem_cache will be allocated. If the subsequent n2_register_algs call
fails, the kmem_cache will be released in queue_cache_destroy, but
queue_cache_init[0] is not set back to NULL.

So when the Module Arithmetic Unit gets probed next (n2_mau_probe),
queue_cache_init will not allocate a kmem_cache again, but leave it
as its bogus value, causing a BUG() to trigger when queue_cache[0] is
eventually passed to kmem_cache_zalloc:

n2_crypto: Found N2CP at /virtual-devices@100/n2cp@7
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
n2_crypto: md5 alg registration failed
n2cp f028687c: /virtual-devices@100/n2cp@7: Unable to register algorithms.
called queue_cache_destroy
n2cp: probe of f028687c failed with error -22
n2_crypto: Found NCP at /virtual-devices@100/ncp@6
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
kernel BUG at mm/slab.c:2993!
Call Trace:
 [0000000000604488] kmem_cache_alloc+0x1a8/0x1e0
                  (inlined) kmem_cache_zalloc
                  (inlined) new_queue
                  (inlined) spu_queue_setup
                  (inlined) handle_exec_unit
 [0000000010c61eb4] spu_mdesc_scan+0x1f4/0x460 [n2_crypto]
 [0000000010c62b80] n2_mau_probe+0x100/0x220 [n2_crypto]
 [000000000084b174] platform_drv_probe+0x34/0xc0

Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi/capsule-loader: Reinstate virtual capsule mapping

commit f24c4d478013d82bd1b943df566fff3561d52864 upstream.

Commit:

  82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header")

... refactored the capsule loading code that maps the capsule header,
to avoid having to map it several times.

However, as it turns out, the vmap() call we ended up removing did not
just map the header, but the entire capsule image, and dropping this
virtual mapping breaks capsules that are processed by the firmware
immediately (i.e., without a reboot).

Unfortunately, that change was part of a larger refactor that allowed
a quirk to be implemented for Quark, which has a non-standard memory
layout for capsules, and we have slightly painted ourselves into a
corner by allowing quirk code to mangle the capsule header and memory
layout.

So we need to fix this without breaking Quark. Fortunately, Quark does
not appear to care about the virtual mapping, and so we can simply
do a partial revert of commit:

  2a457fb31df6 ("efi/capsule-loader: Use page addresses rather than struct page pointers")

... and create a vmap() mapping of the entire capsule (including header)
based on the reinstated struct page array, unless running on Quark, in
which case we pass the capsule header copy as before.

Reported-by: Ge Song <ge.song@hxt-semitech.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Tested-by: Ge Song <ge.song@hxt-semitech.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header")
Link: http://lkml.kernel.org/r/20180102172110.17018-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes

commit ec35e48b286959991cdbb886f1bdeda4575c80b4 upstream.

refcounts have a generic implementation and an asm optimized one.  The
generic version has extra debugging to make sure that once a refcount
goes to zero, refcount_inc won't increase it.

The btrfs delayed inode code wasn't expecting this, and we're tripping
over the warnings when the generic refcounts are used.  We ended up with
this race:

Process A                                         Process B
                                                  btrfs_get_delayed_node()
  spin_lock(root->inode_lock)
  radix_tree_lookup()
__btrfs_release_delayed_node()
refcount_dec_and_test(&delayed_node->refs)
our refcount is now zero
  refcount_add(2) <---
  warning here, refcount
                                                  unchanged

spin_lock(root->inode_lock)
radix_tree_delete()

With the generic refcounts, we actually warn again when process B above
tries to release his refcount because refcount_add() turned into a
no-op.

We saw this in production on older kernels without the asm optimized
refcounts.

The fix used here is to use refcount_inc_not_zero() to detect when the
object is in the middle of being freed and return NULL.  This is almost
always the right answer anyway, since we usually end up pitching the
delayed_node if it didn't have fresh data in it.

This also changes __btrfs_release_delayed_node() to remove the extra
check for zero refcounts before radix tree deletion.
btrfs_get_delayed_node() was the only path that was allowing refcounts
to go from zero to one.

Fixes: 6de5f18e7b0da ("btrfs: fix refcount_t usage when deleting btrfs_delayed_node")
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails

commit 0cbb4b4f4c44f54af268969b18d8deda63aded59 upstream.

The previous fix in commit 384632e67e08 ("userfaultfd: non-cooperative:
fix fork use after free") corrected the refcounting in case of
UFFD_EVENT_FORK failure for the fork userfault paths.

That still didn't clear the vma->vm_userfaultfd_ctx of the vmas that
were set to point to the aborted new uffd ctx earlier in
dup_userfaultfd.

Link: http://lkml.kernel.org/r/20171223002505.593-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/sparse.c: wrong allocation for mem_section

commit d09cfbbfa0f761a97687828b5afb27b56cbf2e19 upstream.

In commit 83e3c48729d9 ("mm/sparsemem: Allocate mem_section at runtime
for CONFIG_SPARSEMEM_EXTREME=y") mem_section is allocated at runtime to
save memory.

It allocates the first dimension of array with sizeof(struct mem_section).

It costs extra memory, should be sizeof(struct mem_section *).

Fix it.

Link: http://lkml.kernel.org/r/1513932498-20350-1-git-send-email-bhe@redhat.com
Fixes: 83e3c48729 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mprotect: add a cond_resched() inside change_pmd_range()

commit 4991c09c7c812dba13ea9be79a68b4565bb1fa4e upstream.

While testing on a large CPU system, detected the following RCU stall
many times over the span of the workload.  This problem is solved by
adding a cond_resched() in the change_pmd_range() function.

  INFO: rcu_sched detected stalls on CPUs/tasks:
   154-....: (670 ticks this GP) idle=022/140000000000000/0 softirq=2825/2825 fqs=612
   (detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864)
  Sending NMI from CPU 955 to CPUs 154:
  NMI backtrace for cpu 154
  CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3
  NIP:  c0000000000b3f64 LR: c0000000000b33d4 CTR: 000000000000aa18
  REGS: 00000000a4b0fb44 TRAP: 0501   Not tainted  (4.15.0-rc3+)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22422082  XER: 00000000
  CFAR: 00000000006cf8f0 SOFTE: 1
  GPR00: 0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000
  GPR04: 8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00
  GPR08: 8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00
  GPR12: ffffffffffffffff c00000000fb25100
  NIP [c0000000000b3f64] plpar_hcall9+0x44/0x7c
  LR [c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420
  Call Trace:
    flush_hash_range+0x48/0x100
    __flush_tlb_pending+0x44/0xd0
    hpte_need_flush+0x408/0x470
    change_protection_range+0xaac/0xf10
    change_prot_numa+0x30/0xb0
    task_numa_work+0x2d0/0x3e0
    task_work_run+0x130/0x190
    do_notify_resume+0x118/0x120
    ret_from_except_lite+0x70/0x74
  Instruction dump:
  60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378
  e9410060 e9610068 e9810070 44000022 <7d806378> e9810028 f88c0000 f8ac0008

Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/acct.c: fix the acct->needcheck check in check_free_space()

commit 4d9570158b6260f449e317a5f9ed030c2504a615 upstream.

As Tsukada explains, the time_is_before_jiffies(acct->needcheck) check
is very wrong, we need time_is_after_jiffies() to make sys_acct() work.

Ignoring the overflows, the code should "goto out" if needcheck >
jiffies, while currently it checks "needcheck < jiffies" and thus in the
likely case check_free_space() does nothing until jiffies overflow.

In particular this means that sys_acct() is simply broken, acct_on()
sets acct->needcheck = jiffies and expects that check_free_space()
should set acct->active = 1 after the free-space check, but this won't
happen if jiffies increments in between.

This was broken by commit 32dc73086015 ("get rid of timer in
kern/acct.c") in 2011, then another (correct) commit 795a2f22a8ea
("acct() should honour the limits from the very beginning") made the
problem more visible.

Link: http://lkml.kernel.org/r/20171213133940.GA6554@redhat.com
Fixes: 32dc73086015 ("get rid of timer in kern/acct.c")
Reported-by: TSUKADA Koutaro <tsukada@ascade.co.jp>
Suggested-by: TSUKADA Koutaro <tsukada@ascade.co.jp>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN

commit de791821c295cc61419a06fe5562288417d1bc58 upstream.

Use the name associated with the particular attack which needs page table
isolation for mitigation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Koshina <jikos@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Lutomirski <luto@amacapital.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Greg KH <gregkh@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801051525300.1724@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm

commit b9e705ef7cfaf22db0daab91ad3cd33b0fa32eb9 upstream.

Where an ALTERNATIVE is used in the middle of an inline asm block, this
would otherwise lead to the following instruction being appended directly
to the trailing ".popsection", and a failed compile.

Fixes: 9cebed423c84 ("x86, alternative: Use .pushsection/.popsection")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: ak@linux.intel.com
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Turner <pjt@google.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180104143710.8961-8-dwmw@amazon.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/tlb: Drop the _GPL from the cpu_tlbstate export

commit 1e5476815fd7f98b888e01a0f9522b63085f96c9 upstream.

The recent changes for PTI touch cpu_tlbstate from various tlb_flush
inlines. cpu_tlbstate is exported as GPL symbol, so this causes a
regression when building out of tree drivers for certain graphics cards.

Aside of that the export was wrong since it was introduced as it should
have been EXPORT_PER_CPU_SYMBOL_GPL().

Use the correct PER_CPU export and drop the _GPL to restore the previous
state which allows users to utilize the cards they payed for.

As always I'm really thrilled to make this kind of change to support the
#friends (or however the hot hashtag of today is spelled) from that closet
sauce graphics corp.

Fixes: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")
Fixes: 6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches")
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers

commit 42f3bdc5dd962a5958bc024c1e1444248a6b8b4a upstream.

Thomas reported the following warning:

 BUG: using smp_processor_id() in preemptible [00000000] code: ovsdb-server/4498
 caller is native_flush_tlb_single+0x57/0xc0
 native_flush_tlb_single+0x57/0xc0
 __set_pte_vaddr+0x2d/0x40
 set_pte_vaddr+0x2f/0x40
 cea_set_pte+0x30/0x40
 ds_update_cea.constprop.4+0x4d/0x70
 reserve_ds_buffers+0x159/0x410
 x86_reserve_hardware+0x150/0x160
 x86_pmu_event_init+0x3e/0x1f0
 perf_try_init_event+0x69/0x80
 perf_event_alloc+0x652/0x740
 SyS_perf_event_open+0x3f6/0xd60
 do_syscall_64+0x5c/0x190

set_pte_vaddr is used to map the ds buffers into the cpu entry area, but
there are two problems with that:

 1) The resulting flush is not supposed to be called in preemptible context

 2) The cpu entry area is supposed to be per CPU, but the debug store
    buffers are mapped for all CPUs so these mappings need to be flushed
    globally.

Add the necessary preemption protection across the mapping code and flush
TLBs globally.

Fixes: c1961a4631da ("x86/events/intel/ds: Map debug buffers in cpu_entry_area")
Reported-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Link: https://lkml.kernel.org/r/20180104170712.GB3040@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kaslr: Fix the vaddr_end mess

commit 1dddd25125112ba49706518ac9077a1026a18f37 upstream.

vaddr_end for KASLR is only documented in the KASLR code itself and is
adjusted depending on config options. So it's not surprising that a change
of the memory layout causes KASLR to have the wrong vaddr_end. This can map
arbitrary stuff into other areas causing hard to understand problems.

Remove the whole ifdef magic and define the start of the cpu_entry_area to
be the end of the KASLR vaddr range.

Add documentation to that effect.

Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Reported-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801041320360.1771@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Map cpu_entry_area at the same place on 4/5 level

commit f2078904810373211fb15f91888fba14c01a4acc upstream.

There is no reason for 4 and 5 level pagetables to have a different
layout. It just makes determining vaddr_end for KASLR harder than
necessary.

Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801041320360.1771@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Set MODULES_END to 0xffffffffff000000

commit f5a40711fa58f1c109165a4fec6078bf2dfd2bdc upstream.

Since f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
kasan_mem_to_shadow(MODULES_END) could be not aligned to a page boundary.

So passing page unaligned address to kasan_populate_zero_shadow() have two
possible effects:

1) It may leave one page hole in supposed to be populated area. After commit
  21506525fb8d ("x86/kasan/64: Teach KASAN about the cpu_entry_area") that
  hole happens to be in the shadow covering fixmap area and leads to crash:

 BUG: unable to handle kernel paging request at fffffbffffe8ee04
 RIP: 0010:check_memory_region+0x5c/0x190

 Call Trace:
  <NMI>
  memcpy+0x1f/0x50
  ghes_copy_tofrom_phys+0xab/0x180
  ghes_read_estatus+0xfb/0x280
  ghes_notify_nmi+0x2b2/0x410
  nmi_handle+0x115/0x2c0
  default_do_nmi+0x57/0x110
  do_nmi+0xf8/0x150
  end_repeat_nmi+0x1a/0x1e

Note, the crash likely disappeared after commit 92a0f81d8957, which
changed kasan_populate_zero_shadow() call the way it was before
commit 21506525fb8d.

2) Attempt to load module near MODULES_END will fail, because
   __vmalloc_node_range() called from kasan_module_alloc() will hit the
   WARN_ON(!pte_none(*pte)) in the vmap_pte_range() and bail out with error.

To fix this we need to make kasan_mem_to_shadow(MODULES_END) page aligned
which means that MODULES_END should be 8*PAGE_SIZE aligned.

The whole point of commit f06bdd4001c2 was to move MODULES_END down if
NR_CPUS is big, so the cpu_entry_area takes a lot of space.
But since 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
the cpu_entry_area is no longer in fixmap, so we could just set
MODULES_END to a fixed 8*PAGE_SIZE aligned address.

Fixes: f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Link: https://lkml.kernel.org/r/20171228160620.23818-1-aryabinin@virtuozzo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.12

rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate

commit 05a03bf260e0480bfc0db91b1fdbc2115e3f193b upstream.

m41t80_sqw_set_rate will be called with the result from
m41t80_sqw_round_rate, so might as well make
m41t80_sqw_set_rate(n) same as
m41t80_sqw_set_rate(m41t80_sqw_round_rate(n))

As Russell King wrote[1],
"clk_round_rate() is supposed to tell you what you end up with if you
ask clk_set_rate() to set the exact same value you passed in - but
clk_round_rate() won't modify the hardware."

[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2012-January/080175.html

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared

commit 13bb1d78f2e372ec0d9b30489ac63768240140fc upstream.

This is a little more efficient and avoids the warning

 WARNING: possible circular locking dependency detected
 4.14.0-rc7-00010 #16 Not tainted
 ------------------------------------------------------
 kworker/2:1/70 is trying to acquire lock:
  (prepare_lock){+.+.}, at: [<c049300c>] clk_prepare_lock+0x80/0xf4

 but task is already holding lock:
  (i2c_register_adapter){+.+.}, at: [<c0690b04>]
i2c_adapter_lock_bus+0x14/0x18

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (i2c_register_adapter){+.+.}:
        rt_mutex_lock+0x44/0x5c
        i2c_adapter_lock_bus+0x14/0x18
        i2c_transfer+0xa8/0xbc
        i2c_smbus_xfer+0x20c/0x5d8
        i2c_smbus_read_byte_data+0x38/0x48
        m41t80_sqw_is_prepared+0x18/0x28

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate

commit 2cb90ed3de1e279dbaf23df141f54eb9fb1861e6 upstream.

This is a little more efficient, and avoids the warning

 WARNING: possible circular locking dependency detected
 4.14.0-rc7-00007 #14 Not tainted
 ------------------------------------------------------
 alsactl/330 is trying to acquire lock:
 (prepare_lock){+.+.}, at: [<c049300c>] clk_prepare_lock+0x80/0xf4

 but task is already holding lock:
 (i2c_register_adapter){+.+.}, at: [<c0690ae0>]
i2c_adapter_lock_bus+0x14/0x18

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (i2c_register_adapter){+.+.}:
        rt_mutex_lock+0x44/0x5c
        i2c_adapter_lock_bus+0x14/0x18
        i2c_transfer+0xa8/0xbc
        i2c_smbus_xfer+0x20c/0x5d8
        i2c_smbus_read_byte_data+0x38/0x48
        m41t80_sqw_recalc_rate+0x24/0x58

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: m41t80: fix m41t80_sqw_round_rate return value

commit c8384bb04261b9d32fe7402a6068ddaf38913b23 upstream.

Previously it was returning the best of
32768, 8192, 1024, 64, 2, 0

Now, best of
32768, 8192, 4096, 2048, 1024, 512, 256, 128,
64, 32, 16, 8, 4, 2, 1, 0

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: m41t80: m41t80_sqw_set_rate should return 0 on success

commit de6042d2fa8afe22b76e3c68fd6e9584c9415a3b upstream.

Previously it was returning -EINVAL upon success.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "xfrm: Fix stack-out-of-bounds read in xfrm_state_find."

commit 94802151894d482e82c324edf2c658f8e6b96508 upstream.

This reverts commit c9f3f813d462c72dbe412cee6a5cbacf13c4ad5e.

This commit breaks transport mode when the policy template
has widlcard addresses configured, so revert it.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: From: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/process: Define cpu_tss_rw in same section as declaration

commit 2fd9c41aea47f4ad071accf94b94f94f2c4d31eb upstream.

cpu_tss_rw is declared with DECLARE_PER_CPU_PAGE_ALIGNED
but then defined with DEFINE_PER_CPU_SHARED_ALIGNED
leading to section mismatch warnings.

Use DEFINE_PER_CPU_PAGE_ALIGNED consistently. This is necessary because
it's mapped to the cpu entry area and must be page aligned.

[ tglx: Massaged changelog a bit ]

Fixes: 1a935bc3d4ea ("x86/entry: Move SYSENTER_stack to the beginning of struct tss_struct")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: thomas.lendacky@amd.com
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: tklauser@distanz.ch
Cc: minipli@googlemail.com
Cc: me@kylehuey.com
Cc: namit@vmware.com
Cc: luto@kernel.org
Cc: jpoimboe@redhat.com
Cc: tj@kernel.org
Cc: cl@linux.com
Cc: bp@suse.de
Cc: thgarnie@google.com
Cc: kirill.shutemov@linux.intel.com
Link: https://lkml.kernel.org/r/20180103203954.183360-1-ndesaulniers@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat()

commit d7732ba55c4b6a2da339bb12589c515830cfac2c upstream.

The preparation for PTI which added CR3 switching to the entry code
misplaced the CR3 switch in entry_SYSCALL_compat().

With PTI enabled the entry code tries to access a per cpu variable after
switching to kernel GS. This fails because that variable is not mapped to
user space. This results in a double fault and in the worst case a kernel
crash.

Move the switch ahead of the access and clobber RSP which has been saved
already.

Fixes: 8a09317b895f ("x86/mm/pti: Prepare the x86/entry assembly code for entry/exit CR3 switching")
Reported-by: Lars Wendler <wendler.lars@web.de>
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>,
Cc: Dave Hansen <dave.hansen@linux.intel.com>,
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Greg KH <gregkh@linuxfoundation.org>, ,
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Cc: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801031949200.1957@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/dumpstack: Print registers for first stack frame

commit 3ffdeb1a02be3086f1411a15c5b9c481fa28e21f upstream.

In the stack dump code, if the frame after the starting pt_regs is also
a regs frame, the registers don't get printed.  Fix that.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Fixes: 3b3fa11bc700 ("x86/dumpstack: Print any pt_regs found on the stack")
Link: http://lkml.kernel.org/r/396f84491d2f0ef64eda4217a2165f5712f6a115.1514736742.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/dumpstack: Fix partial register dumps

commit a9cdbe72c4e8bf3b38781c317a79326e2e1a230d upstream.

The show_regs_safe() logic is wrong.  When there's an iret stack frame,
it prints the entire pt_regs -- most of which is random stack data --
instead of just the five registers at the end.

show_regs_safe() is also poorly named: the on_stack() checks aren't for
safety.  Rename the function to show_regs_if_on_stack() and add a
comment to explain why the checks are needed.

These issues were introduced with the "partial register dump" feature of
the following commit:

  b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully")

That patch had gone through a few iterations of development, and the
above issues were artifacts from a previous iteration of the patch where
'regs' pointed directly to the iret frame rather than to the (partially
empty) pt_regs.

Tested-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Fixes: b02fcf9ba121 ("x86/unwinder: Handle stack overflows more gracefully")
Link: http://lkml.kernel.org/r/5b05b8b344f59db2d3d50dbdeba92d60f2304c54.1514736742.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/pti: Make sure the user/kernel PTEs match

commit 52994c256df36fda9a715697431cba9daecb6b11 upstream.

Meelis reported that his K8 Athlon64 emits MCE warnings when PTI is
enabled:

[Hardware Error]: Error Addr: 0x0000ffff81e000e0
[Hardware Error]: MC1 Error: L1 TLB multimatch.
[Hardware Error]: cache level: L1, tx: INSN

The address is in the entry area, which is mapped into kernel _AND_ user
space. That's special because we switch CR3 while we are executing
there.

User mapping:
0xffffffff81e00000-0xffffffff82000000           2M     ro         PSE     GLB x  pmd

Kernel mapping:
0xffffffff81000000-0xffffffff82000000          16M     ro         PSE         x  pmd

So the K8 is complaining that the TLB entries differ. They differ in the
GLB bit.

Drop the GLB bit when installing the user shared mapping.

Fixes: 6dc72c3cbca0 ("x86/mm/pti: Share entry text PMD")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Meelis Roos <mroos@linux.ee>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801031407180.1957@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpu, x86/pti: Do not enable PTI on AMD processors

commit 694d99d40972f12e59a3696effee8a376b79d7c8 upstream.

AMD processors are not subject to the types of attacks that the kernel
page table isolation feature protects against.  The AMD microarchitecture
does not allow memory references, including speculative references, that
access higher privileged data when running in a lesser privileged mode
when that access would result in a page fault.

Disable page table isolation by default on AMD processors by not setting
the X86_BUG_CPU_INSECURE feature, which controls whether X86_FEATURE_PTI
is set.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20171227054354.20369.94587.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

capabilities: fix buffer overread on very short xattr

commit dc32b5c3e6e2ef29cef76d9ce1b92d394446150e upstream.

If userspace attempted to set a "security.capability" xattr shorter than
4 bytes (e.g. 'setfattr -n security.capability -v x file'), then
cap_convert_nscap() read past the end of the buffer containing the xattr
value because it accessed the ->magic_etc field without verifying that
the xattr value is long enough to contain that field.

Fix it by validating the xattr value size first.

This bug was found using syzkaller with KASAN.  The KASAN report was as
follows (cleaned up slightly):

    BUG: KASAN: slab-out-of-bounds in cap_convert_nscap+0x514/0x630 security/commoncap.c:498
    Read of size 4 at addr ffff88002d8741c0 by task syz-executor1/2852

    CPU: 0 PID: 2852 Comm: syz-executor1 Not tainted 4.15.0-rc6-00200-gcc0aac99d977 #253
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    Call Trace:
     __dump_stack lib/dump_stack.c:17 [inline]
     dump_stack+0xe3/0x195 lib/dump_stack.c:53
     print_address_description+0x73/0x260 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x235/0x350 mm/kasan/report.c:409
     cap_convert_nscap+0x514/0x630 security/commoncap.c:498
     setxattr+0x2bd/0x350 fs/xattr.c:446
     path_setxattr+0x168/0x1b0 fs/xattr.c:472
     SYSC_setxattr fs/xattr.c:487 [inline]
     SyS_setxattr+0x36/0x50 fs/xattr.c:483
     entry_SYSCALL_64_fastpath+0x18/0x85

Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exec: Weaken dumpability for secureexec

commit e816c201aed5232171f8eb80b5d46ae6516683b9 upstream.

This is a logical revert of commit e37fdb785a5f ("exec: Use secureexec
for setting dumpability")

This weakens dumpability back to checking only for uid/gid changes in
current (which is useless), but userspace depends on dumpability not
being tied to secureexec.

  https://bugzilla.redhat.com/show_bug.cgi?id=1528633

Reported-by: Tom Horsley <horsley1953@gmail.com>
Fixes: e37fdb785a5f ("exec: Use secureexec for setting dumpability")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.11

tty: fix tty_ldisc_receive_buf() documentation

commit e7e51dcf3b8a5f65c5653a054ad57eb2492a90d0 upstream.

The tty_ldisc_receive_buf() helper returns the number of bytes
processed so drop the bogus "not" from the kernel doc comment.

Fixes: 8d082cd300ab ("tty: Unify receive_buf() code paths")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)

commit 966031f340185eddd05affcf72b740549f056348 upstream.

We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty:
Add EXTPROC support for LINEMODE") and the intent was to allow it to
override some (all?) ICANON behavior.  Quoting from that original commit
message:

         There is a new bit in the termios local flag word, EXTPROC.
         When this bit is set, several aspects of the terminal driver
         are disabled.  Input line editing, character echo, and mapping
         of signals are all disabled.  This allows the telnetd to turn
         off these functions when in linemode, but still keep track of
         what state the user wants the terminal to be in.

but the problem turns out that "several aspects of the terminal driver
are disabled" is a bit ambiguous, and you can really confuse the n_tty
layer by setting EXTPROC and then causing some of the ICANON invariants
to no longer be maintained.

This fixes at least one such case (TIOCINQ) becoming unhappy because of
the confusion over whether ICANON really means ICANON when EXTPROC is set.

This basically makes TIOCINQ match the case of read: if EXTPROC is set,
we ignore ICANON.  Also, make sure to reset the ICANON state ie EXTPROC
changes, not just if ICANON changes.

Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/ldt: Make LDT pgtable free conditional

commit 7f414195b0c3612acd12b4611a5fe75995cf10c7 upstream.

Andy prefers to be paranoid about the pagetable free in the error path of
write_ldt(). Make it conditional and warn whenever the installment of a
secondary LDT fails.

Requested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/ldt: Plug memory leak in error path

commit a62d69857aab4caa43049e72fe0ed5c4a60518dd upstream.

The error path in write_ldt() tries to free 'old_ldt' instead of the newly
allocated 'new_ldt', resulting in a memory leak. It also misses to clean up a
half populated LDT pagetable, which is not a leak as it gets cleaned up
when the process exits.

Free both the potentially half populated LDT pagetable and the newly
allocated LDT struct. This can be done unconditionally because once an LDT
is mapped subsequent maps will succeed, because the PTE page is already
populated and the two LDTs fit into that single page.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f55f0501cbf6 ("x86/pti: Put the LDT in its own PGD if PTI is on")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1712311121340.1899@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/espfix/64: Fix espfix double-fault handling on 5-level systems

commit c739f930be1dd5fd949030e3475a884fe06dae9b upstream.

Using PGDIR_SHIFT to identify espfix64 addresses on 5-level systems
was wrong, and it resulted in panics due to unhandled double faults.
Use P4D_SHIFT instead, which is correct on 4-level and 5-level
machines.

This fixes a panic when running x86 selftests on 5-level machines.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1d33b219563f ("x86/espfix: Add support for 5-level paging")
Link: http://lkml.kernel.org/r/24c898b4f44fdf8c22d93703850fb384ef87cfdc.1513035461.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)

commit ac461122c88a10b7d775de2f56467f097c9e627a upstream.

Commit e802a51ede91 ("x86/idt: Consolidate IDT invalidation") cleaned up
and unified the IDT invalidation that existed in a couple of places.  It
changed no actual real code.

Despite not changing any actual real code, it _did_ change code generation:
by implementing the common idt_invalidate() function in
archx86/kernel/idt.c, it made the use of the function in
arch/x86/kernel/machine_kexec_32.c be a real function call rather than an
(accidental) inlining of the function.

That, in turn, exposed two issues:

 - in load_segments(), we had incorrectly reset all the segment
   registers, which then made the stack canary load (which gcc does
   using offset of %gs) cause a trap.  Instead of %gs pointing to the
   stack canary, it will be the normal zero-based kernel segment, and
   the stack canary load will take a page fault at address 0x14.

 - to make this even harder to debug, we had invalidated the GDT just
   before calling idt_invalidate(), which meant that the fault happened
   with an invalid GDT, which in turn causes a triple fault and
   immediate reboot.

Fix this by

 (a) not reloading the special segments in load_segments(). We currently
     don't do any percpu accesses (which would require %fs on x86-32) in
     this area, but there's no reason to think that we might not want to
     do them, and like %gs, it's pointless to break it.

 (b) doing idt_invalidate() before invalidating the GDT, to keep things
     at least _slightly_ more debuggable for a bit longer. Without a
     IDT, traps will not work. Without a GDT, traps also will not work,
     but neither will any segment loads etc. So in a very real sense,
     the GDT is even more core than the IDT.

Fixes: e802a51ede91 ("x86/idt: Consolidate IDT invalidation")
Reported-and-tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/alpine.LFD.2.21.1712271143180.8572@i7.lan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()

commit decab0888e6e14e11d53cefa85f8b3d3b45ce73c upstream.

The preempt_disable/enable() pair in __native_flush_tlb() was added in
commit:

  5cf0791da5c1 ("x86/mm: Disable preemption during CR3 read+write")

... to protect the UP variant of flush_tlb_mm_range().

That preempt_disable/enable() pair should have been added to the UP variant
of flush_tlb_mm_range() instead.

The UP variant was removed with commit:

  ce4a4e565f52 ("x86/mm: Remove the UP asm/tlbflush.h code, always use the (formerly) SMP code")

... but the preempt_disable/enable() pair stayed around.

The latest change to __native_flush_tlb() in commit:

  6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches")

... added an access to a per CPU variable outside the preempt disabled
regions, which makes no sense at all. __native_flush_tlb() must always
be called with at least preemption disabled.

Remove the preempt_disable/enable() pair and add a WARN_ON_ONCE() to catch
bad callers independent of the smp_processor_id() debugging.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171230211829.679325424@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/smpboot: Remove stale TLB flush invocations

commit 322f8b8b340c824aef891342b0f5795d15e11562 upstream.

smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector()
invoke local_flush_tlb() for no obvious reason.

Digging in history revealed that the original code in the 2.1 era added
those because the code manipulated a swapper_pg_dir pagetable entry. The
pagetable manipulation was removed long ago in the 2.3 timeframe, but the
TLB flush invocations stayed around forever.

Remove them along with the pointless pr_debug()s which come from the same 2.1
change.

Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()

commit 5d62c183f9e9df1deeea0906d099a94e8a43047a upstream.

The conditions in irq_exit() to invoke tick_nohz_irq_exit() which
subsequently invokes tick_nohz_stop_sched_tick() are:

  if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu))

If need_resched() is not set, but a timer softirq is pending then this is
an indication that the softirq code punted and delegated the execution to
softirqd. need_resched() is not true because the current interrupted task
takes precedence over softirqd.

Invoking tick_nohz_irq_exit() in this case can cause an endless loop of
timer interrupts because the timer wheel contains an expired timer, but
softirqs are not yet executed. So it returns an immediate expiry request,
which causes the timer to fire immediately again. Lather, rinse and
repeat....

Prevent that by adding a check for a pending timer soft interrupt to the
conditions in tick_nohz_stop_sched_tick() which avoid calling
get_next_timer_interrupt(). That keeps the tick sched timer on the tick and
prevents a repetitive programming of an already expired timer.

Reported-by: Sebastian Siewior <bigeasy@linutronix.d>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device

commit d6b246bb7a29703f53aa4c050b8b3205d749caee upstream.

Use the direction argument passed into begin_cpu_access
and end_cpu_access when calling the dma_sync_sg_for_cpu/device.
The actual cache primitive called depends on the direction
passed in.

Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: base: cacheinfo: fix cache type for non-architected system cache

commit f57ab9a01a36ef3454333251cc57e3a9948b17bf upstream.

Commit dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for
cache properties") doesn't initialise the cache type if it's present
only in DT and the architecture is not aware of it. They are unified
system level cache which are generally transparent.

This patch check if the cache type is set to NOCACHE but the DT node
indicates that it's unified cache and sets the cache type accordingly.

Fixes: dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties")
Reported-and-tested-by: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: tegra: fix device-tree node lookups

commit 046046737bd35bed047460f080ea47e186be731e upstream.

Fix child-node lookups during probe, which ended up searching the whole
device tree depth-first starting at the parents rather than just
matching on their children.

To make things worse, some parent nodes could end up being being
prematurely freed (by tegra_xusb_pad_register()) as
of_find_node_by_name() drops a reference to its first argument.

Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support")
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix proc->files use-after-free

commit 7f3dc0088b98533f17128058fac73cd8b2752ef1 upstream.

proc->files cleanup is initiated by binder_vma_close. Therefore
a reference on the binder_proc is not enough to prevent the
files_struct from being released while the binder_proc still has
a reference. This can lead to an attempt to dereference the
stale pointer obtained from proc->files prior to proc->files
cleanup. This has been seen once in task_get_unused_fd_flags()
when __alloc_fd() is called with a stale "files".

The fix is to protect proc->files with a mutex to prevent cleanup
while in use.

Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>