aspeed/smc: define registers for all possible CS

The model should expose one control register per possible CS. When
testing the validity of the register number in the read operation,
replace 's->num_cs' by 'ctrl->max_slaves' which represents the maximum
number of flash devices a controller can handle.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190124140519.13838-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aspeed/smc: fix default read value

0xFFFFFFFF should be returned for non implemented registers.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190124140519.13838-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

xlnx-zynqmp: Don't create rpu-cluster if there are no RPUs

If we aren't going to create any RPUs, then don't create the
rpu-cluster unit. This allows us to add an assertion to the
cluster object that it contains at least one CPU, which helps
to avoid bugs in creating clusters and putting CPUs in them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190121184314.14311-1-peter.maydell@linaro.org

checkpatch: Don't emit spurious warnings about block comments

In checkpatch we attempt to check for and warn about
block comments which start with /* or /** followed by a
non-blank. Unfortunately a bug in the regex meant that
we would incorrectly warn about comments starting with
"/**" with no following text:

  git show 9813dc6ac3954d58ba16b3920556f106f97e1c67|./scripts/checkpatch.pl -
  WARNING: Block comments use a leading /* on a separate line
  #34: FILE: tests/libqtest.h:233:
  +/**

The sequence "/\*\*?" was intended to match either "/*" or "/**",
but Perl's semantics for '?' allow it to backtrack and try the
"matches 0 chars" option if the "matches 1 char" choice leads to
a failure of the rest of the regex to match.  Switch to "/\*\*?+"
which uses what perlre(1) calls the "possessive" quantifier form:
this means that if it matches the "/**" string it will not later
backtrack to matching just the "/*" prefix.

The other end of the regex is also wrong: it is attempting
to check for "/* or /** followed by something that isn't
just whitespace", but [ \t]*.+[ \t]* will match on pure
whitespace. This is less significant but means that a line
with just a comment-starter followed by trailing whitespace
will generate an incorrect warning about block comment style
as well as the correct error about trailing whitespace which
a different checkpatch test emits.

Fixes: 8c06fbdf36bf4d ("scripts/checkpatch.pl: Enforce multiline comment syntax")
Reported-by: Thomas Huth <thuth@redhat.com>
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190118165050.22270-1-peter.maydell@linaro.org

tests/microbit-test: Check nRF51 UART functionality

Some functional tests for:
    Basic reception/transmittion
    Suspending
    INTEN* registers

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190123120759.7162-4-jusual@mail.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/microbit-test: Make test independent of global_qtest

Using of global_qtest is not required here. Let's replace functions like
readl() with the corresponding qtest_* counterparts.

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190123120759.7162-3-jusual@mail.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

tests/libqtest: Introduce qtest_init_with_serial()

Run qtest with a socket that connects QEMU chardev and test code.

Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190123120759.7162-2-jusual@mail.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

memory: add memory_region_flush_rom_device()

ROM devices go via MemoryRegionOps->write() callbacks for write
operations and do not dirty/invalidate that memory.  Device emulation
must be able to mark memory ranges that have been modified internally
(e.g. using memory_region_get_ram_ptr()).

Introduce the memory_region_flush_rom_device() API for this purpose.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190123212234.32068-2-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fix block comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Don't clear supported PMU events when initializing PMCEID1

A bug was introduced during a respin of:

commit 57a4a11b2b281bb548b419ca81bfafb214e4c77a
target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0

This patch introduced two calls to get_pmceid() during CPU
initialization - one each for PMCEID0 and PMCEID1. In addition to
building the register values, get_pmceid() clears an internal array
mapping event numbers to their implementations (supported_event_map)
before rebuilding it. This is an optimization since much of the logic is
shared. However, since it was called twice, the contents of
supported_event_map reflect only the events in PMCEID1 (the second call
to get_pmceid()).

Fix this bug by moving the initialization of PMCEID0 and PMCEID1 back
into a single function call, and name it more appropriately since it is
doing more than simply generating the contents of the PMCEID[01]
registers.

Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190123195814.29253-1-aaron@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: update microbit ARM board files

New source files were added without corresponding ./MAINTAINERS file
entries.  Let's get things up to date.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190123183352.11025-1-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

accel/tcg/user-exec: Don't parse aarch64 insns to test for read vs write

In cpu_signal_handler() for aarch64 hosts, currently we parse
the faulting instruction to see if it is a load or a store.
Since the 3.16 kernel (~2014), the kernel has provided us with
the syndrome register for a fault, which includes the WnR bit.
Use this instead if it is present, only falling back to
instruction parsing if not.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108180014.32386-1-peter.maydell@linaro.org

exec.c: Use correct attrs in cpu_memory_rw_debug()

In the softmmu version of cpu_memory_rw_debug(), we ask the
CPU for the attributes to use for the virtual memory access,
and we correctly use those to identify the address space
index. However, we were not passing them in to the
address_space_write_rom() and address_space_rw() functions.

The effect of this was that a memory access from the gdbstub
to a device which had behaviour that was sensitive to the
memory attributes (such as some ARMv8M NVIC registers) was
incorrectly always performed as if non-secure, rather than
using the right security state for the CPU's current state.

Fixes: https://bugs.launchpad.net/qemu/+bug/1812091

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190117133834.7480-1-peter.maydell@linaro.org

tests/microbit-test: add TWI stub device test

This test verifies that we read back the expected I2C WHO_AM_I register
values for the accelerometer/magnetometer.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190110094020.18354-3-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm: Stub out NRF51 TWI magnetometer/accelerometer detection

Recent microbit firmwares panic if the TWI magnetometer/accelerometer
devices are not detected during startup.  We don't implement TWI (I2C)
so let's stub out these devices just to let the firmware boot.

Signed-off by: Steffen Görtz <contrib@steffen-goertz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190110094020.18354-2-stefanha@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

gdbstub: fix gdb_get_cpu(s, pid, tid) when pid and/or tid are 0

a TID or PID value means "any thread" (resp. "any process"). This commit
fixes the different combinations when at least one value is 0.

When both are 0, the function now returns the first attached CPU,
instead of the CPU with TID 1, which is not necessarily attached or even
existent.

When PID is specified but TID is 0, the function returns the first CPU
in the process, or NULL if the process does not exist or is not
attached.

In other cases, it returns the corresponding CPU, while ignoring the PID
check when PID is 0.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190119140000.11767-1-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: v8m: Ensure IDAU is respected if SAU is disabled

The current behavior of v8m_security_lookup in helper.c only checks whether the
IDAU specifies a higher security if the SAU is enabled. If SAU.ALLNS is set to
1, this will lead to addresses being treated as non-secure, even though the
IDAU indicates that they must be secure.

This patch changes the behavior to also check the IDAU if the SAU is currently
disabled.

(This brings the behaviour here into line with the v8M Arm ARM
SecurityCheck() pseudocode.)

Signed-off-by: Thomas Roth <code@stacksmashing.net>
Message-id: CAGGekkuc+-tvp5RJP7CM+Jy_hJF7eiRHZ96132sb=hPPCappKg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added pseudocode ref to the commit message, fixed comment style]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Fix validation of 32-bit address spaces for aa32

When tsz == 0, aarch32 selects the address space via exclusion,
and there are no "top_bits" remaining that require validation.

Fixes: ba97be9f4a4
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190125184913.5970-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190128' into staging

Backend vector enhancements
Dynamic tlb resizing

# gpg: Signature made Mon 28 Jan 2019 15:57:19 GMT
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190128: (23 commits)
  cputlb: Remove static tlb sizing
  tcg/tci: enable dynamic TLB sizing
  tcg/mips: enable dynamic TLB sizing
  tcg/mips: Fix tcg_out_qemu_ld_slow_path
  tcg/arm: enable dynamic TLB sizing
  tcg/riscv: enable dynamic TLB sizing
  tcg/s390: enable dynamic TLB sizing
  tcg/sparc: enable dynamic TLB sizing
  tcg/ppc: enable dynamic TLB sizing
  tcg/aarch64: enable dynamic TLB sizing
  tcg/i386: enable dynamic TLB sizing
  tcg: introduce dynamic TLB sizing
  cputlb: do not evict empty entries to the vtlb
  tcg/aarch64: Implement vector minmax arithmetic
  tcg/aarch64: Implement vector saturating arithmetic
  tcg/i386: Implement vector minmax arithmetic
  tcg/i386: Implement vector saturating arithmetic
  tcg/i386: Split subroutines out of tcg_expand_vec_op
  tcg: Add opcodes for vector minmax arithmetic
  tcg: Add opcodes for vector saturated arithmetic
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

cputlb: Remove static tlb sizing

Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/tci: enable dynamic TLB sizing

This is automatic due to TCI using the other softtlb macros.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/mips: enable dynamic TLB sizing

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/mips: Fix tcg_out_qemu_ld_slow_path

Patch the branch after it has been emitted rather
than before it exists.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/arm: enable dynamic TLB sizing

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/riscv: enable dynamic TLB sizing

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/s390: enable dynamic TLB sizing

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/sparc: enable dynamic TLB sizing

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/ppc: enable dynamic TLB sizing

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: enable dynamic TLB sizing

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: enable dynamic TLB sizing

As the following experiments show, this series is a net perf gain,
particularly for memory-heavy workloads. Experiments are run on an
Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz.

1. System boot + shudown, debian aarch64:

- Before (v3.1.0):
 Performance counter stats for './die.sh v3.1.0' (10 runs):

       9019.797015      task-clock (msec)         #    0.993 CPUs utilized            ( +-  0.23% )
    29,910,312,379      cycles                    #    3.316 GHz                      ( +-  0.14% )
    54,699,252,014      instructions              #    1.83  insn per cycle           ( +-  0.08% )
    10,061,951,686      branches                  # 1115.541 M/sec                    ( +-  0.08% )
       172,966,530      branch-misses             #    1.72% of all branches          ( +-  0.07% )

       9.084039051 seconds time elapsed                                          ( +-  0.23% )

- After:
 Performance counter stats for './die.sh tlb-dyn-v5' (10 runs):

       8624.084842      task-clock (msec)         #    0.993 CPUs utilized            ( +-  0.23% )
    28,556,123,404      cycles                    #    3.311 GHz                      ( +-  0.13% )
    51,755,089,512      instructions              #    1.81  insn per cycle           ( +-  0.05% )
     9,526,513,946      branches                  # 1104.641 M/sec                    ( +-  0.05% )
       166,578,509      branch-misses             #    1.75% of all branches          ( +-  0.19% )

       8.680540350 seconds time elapsed                                          ( +-  0.24% )

That is, a 4.4% perf increase.

2. System boot + shutdown, ubuntu 18.04 x86_64:

- Before (v3.1.0):
      56100.574751      task-clock (msec)         #    1.016 CPUs utilized            ( +-  4.81% )
   200,745,466,128      cycles                    #    3.578 GHz                      ( +-  5.24% )
   431,949,100,608      instructions              #    2.15  insn per cycle           ( +-  5.65% )
    77,502,383,330      branches                  # 1381.490 M/sec                    ( +-  6.18% )
       844,681,191      branch-misses             #    1.09% of all branches          ( +-  3.82% )

      55.221556378 seconds time elapsed                                          ( +-  5.01% )

- After:
      56603.419540      task-clock (msec)         #    1.019 CPUs utilized            ( +- 10.19% )
   202,217,930,479      cycles                    #    3.573 GHz                      ( +- 10.69% )
   439,336,291,626      instructions              #    2.17  insn per cycle           ( +- 14.14% )
    80,538,357,447      branches                  # 1422.853 M/sec                    ( +- 16.09% )
       776,321,622      branch-misses             #    0.96% of all branches          ( +-  3.77% )

      55.549661409 seconds time elapsed                                          ( +- 10.44% )

No improvement (within noise range). Note that for this workload,
increasing the time window too much can lead to perf degradation,
since it flushes the TLB *very* frequently.

3. x86_64 SPEC06int:

           x86_64-softmmu speedup vs. v3.1.0 for SPEC06int (test set)
            Host: Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz (Skylake)

5.5 +------------------------------------------------------------------------+
    |                   +-+                                                  |
  5 |-+.................+-+...............................tlb-dyn-v5.......+-|
    |                   * *                                                  |
4.5 |-+.................*.*................................................+-|
    |                   * *                                                  |
  4 |-+.................*.*................................................+-|
    |                   * *                                                  |
3.5 |-+.................*.*................................................+-|
    |                   * *                                                  |
  3 |-+......+-+*.......*.*................................................+-|
    |        *  *       * *                                                  |
2.5 |-+......*..*.......*.*.................................+-+*...........+-|
    |        *  *       * *                                 *  *             |
  2 |-+......*..*.......*.*.................................*..*...........+-|
    |        *  *       * *                                 *  *  +-+        |
1.5 |-+......*..*.......*.*.................................*..*.*+-+.*+-+.+-|
    |        *  * *+-+  * *  +-+       *+-+  +-+       +-+  *  * *  * *  *   |
  1 |++++-+*+*++*+*++*++*+*++*+*+++-+*+*+-++*+-++++-++++-+++*++*+*++*+*++*+++|
    |   *  * *  * *  *  * *  * *  *  * *  * *  *  * *  * *  *  * *  * *  *   |
0.5 +------------------------------------------------------------------------+
  400.perlb401.bzip403.g429445.g456.hm462.libq464.h471.omn47483.xalancbgeomean
  png: https://imgur.com/YRF90f7

That is, a 1.51x average speedup over the baseline, with a max speedup
of 5.17x.

Here's a different look at the SPEC06int results, using KVM as the baseline:

             x86_64-softmmu slowdown vs. KVM for SPEC06int (test set)
             Host: Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz (Skylake)

25 +---------------------------------------------------------------------------+
   |                   +-+                                        +-+          |
   |                   * *                             +-+      v3.1.0         |
   |                   * *                             +-+  tlb-dyn-v5         |
   |                   * *                             * *        +-+          |
20 |-+.................*.*.............................*.+-+......*.*........+-|
   |                   * *                             * # #      * *          |
   |        +-+        * *                             * # #      * *          |
   |        * *        * *                             * # #      * *          |
15 |-+......*.*........*.*.............................*.#.#......*.+-+......+-|
   |        * *        * *                             * # #      * #|#        |
   |        * *        * *        +-+                  * # #      * +-+        |
   |        * *  +-+   * *        ++-+       +-+       * # #      * # # +-+    |
   |        * *  +-+   * *        * ##       *|   +-+  * # #      * # # +-+    |
10 |-+......*.*..*.+-+.*.*........*.##.......++-+.*.+-+*.#.#......*.#.#.*.*..+-|
   |        * *  * +-+ * *        * ## +-+   *# # * # #* # # +-+  * # # * *    |
   |        * *  * # # * *  +-+   * ## * +-+ *# # * # #* # # * *  * # # *+-+   |
   |        * *  * # # * *  * +-+ * ## * # # *# # * # #* # # * *  * # # * ##   |
 5 |-+......*.+-+*.#.#.*.*..*.#.#.*.##.*.#.#.*#.#.*.#.#*.#.#.*.*..*.#.#.*.##.+-|
   |        * # #* # # * +-+* # # * ## * # # *# # * # #* # # * *  * # # * ##   |
   |        * # #* # # * # #* # # * ## * # # *# # * # #* # # * +-+* # # * ##   |
   |   ++-+ * # #* # # * # #* # # * ## * # # *# # * # #* # # * # #* # # * ##   |
   |+++*#+#+*+#+#*+#+#+*+#+#*+#+#+*+##+*+#+#+*#+#+*+#+#*+#+#+*+#+#*+#+#+*+##+++|
 0 +---------------------------------------------------------------------------+
 400.perlbe401.bzi403.gc429445.go456.h462.libqu464.h471.omne4483.xalancbmgeomean
  png: https://imgur.com/YzAMNEV

After this series, we bring down the average SPEC06int slowdown vs KVM
from 11.47x to 7.58x.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-4-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: introduce dynamic TLB sizing

Disabled in all TCG backends for now.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

cputlb: do not evict empty entries to the vtlb

Currently we evict an entry to the victim TLB when it doesn't match
the current address. But it could be that there's no match because
the current entry is empty (i.e. all -1's, for instance via tlb_flush).
Do not evict the entry to the vtlb in that case.

This change will help us keep track of the TLB's use rate, which
we'll use to implement a policy for dynamic TLB sizing.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-2-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Implement vector minmax arithmetic

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/aarch64: Implement vector saturating arithmetic

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Implement vector minmax arithmetic

The avx instruction set does not directly provide MO_64.
We can still implement 64-bit with comparison and vpblendvb.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Implement vector saturating arithmetic

Only MO_8 and MO_16 are implemented, since that's all the
instruction set provides.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg/i386: Split subroutines out of tcg_expand_vec_op

This routine was becoming too large.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add opcodes for vector minmax arithmetic

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add opcodes for vector saturated arithmetic

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add write_aofs to GVecGen4

This allows writing 2 output, 3 input operations.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add gvec expanders for nand, nor, eqv

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

tcg: Add logical simplifications during gvec expand

We handle many of these during integer expansion, and the
rest of them during integer optimization.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging

Pull request

# gpg: Signature made Fri 25 Jan 2019 22:06:08 GMT
# gpg:                using RSA key 7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/ide-pull-request:
  ide/via: Implement and use native PCI IDE mode
  ide/via: Rename functions to match device name
  ide/via: Remove vt82c686b_init_ports() function
  sii3112: Remove duplicated code and use PCI IDE ops instead
  ide: Get rid of CMD646BAR struct
  cmd646: Move PCI IDE specific functions to ide/pci.c
  cmd646: Remove IDEBus from CMD646BAR
  cmd646: Remove unused variable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

ide/via: Implement and use native PCI IDE mode

This device only implemented ISA compatibility mode and native PCI IDE
mode was missing but no clients actually need ISA mode but to the
contrary, they usually want to switch to and use device in native
PCI IDE mode. Therefore implement native PCI mode and switch default
to that.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: c323f08c59b9931310c5d92503d370f77ce3a557.1548160772.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

ide/via: Rename functions to match device name

The device is called via-ide and the modelled IDE controller is not
specific to 82C686B but is also usable independently. Therefore, change
function name prefixes accordingly to match device name.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 2905ced862c8d2ad509d73152171ce2472d72605.1548160772.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

ide/via: Remove vt82c686b_init_ports() function

This function is only called once from vt82c686b_ide_realize() and its
content is simple enough to not need a separate function but be
included in realize directly (as done in other IDE models except PIIX
currently).

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 47d854e0fa41dad6861107eac61327c247965566.1548160772.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

sii3112: Remove duplicated code and use PCI IDE ops instead

Parts of the SiI3112 mmio are identical to PCI IDE registers so we can
use the corresponding functions that were factored out into ide/pci.c.
This removes code duplication and simplifies the SiI3112 model which
also helped to spot a copy paste error where reading status of the
2nd channel read the 1st channel instead. This is also fixed here.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 793b6a7934ef2bba26b8d066bec446019efa6c5d.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

ide: Get rid of CMD646BAR struct

Now that no CMD646 specific parts are left in CMD646BAR (all remaining
members are really PCI IDE specific) this struct can be deleted moving
the memory regions for PCI IDE BARs to PCIIDEState where they better
belong. The CMD646 PCI IDE model is adjusted accordingly.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 4b6cb2ae150dc0d21178209e4beb1e35140a7325.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

cmd646: Move PCI IDE specific functions to ide/pci.c

The io mem ops callbacks are not specific to CMD646 but really follow
the PCI IDE spec so move these from cmd646.c to pci.c to allow other
PCI IDE implementations to use them.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: a2b1b2b74afdc78330b8b75605687f683a249635.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

cmd646: Remove IDEBus from CMD646BAR

The cmd646 io mem ops callbacks only need the IDEBus which is
currently passed via a CMD646BAR struct. No need to wrap it up like
that, we can pass it directly to these callbacks which then allows to
drop the IDEBus from the CMD646BAR.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 7a31c155c9899869794499d841d30c7ef32aae47.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

cmd646: Remove unused variable

There was a pointer to PCIIDEState in CMD646BAR which was set but
not used afterwards. Get rid of this unused variable.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1e352f091aa601fb2e19771aac46529fe278dd91.1547166960.git.balaton@eik.bme.hu
Signed-off-by: John Snow <jsnow@redhat.com>

Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging

Python 3 compatibility fixes

# gpg: Signature made Fri 25 Jan 2019 14:04:56 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/python-next-pull-request:
  decodetree: re.fullmatch was added in 3.4
  device-crash-test: Python 3 compatibility fix

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-january-25-2019' into staging

MIPS queue for January 25, 2019

# gpg: Signature made Fri 25 Jan 2019 13:25:57 GMT
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-queue-january-25-2019:
  docs/qemu-cpu-models: Add MIPS/nanoMIPS QEMU supported CPU models
  qemu-doc: Add nanoMIPS ISA information
  tests: tcg: mips: Remove old directories
  tests: tcg: mips: Add two new Makefiles
  tests: tcg: mips: Move source files to new locations
  MAINTAINERS: Update MIPS sections
  target/mips: Add I6500 core configuration
  target/mips: nanoMIPS: Fix branch handling
  disas: nanoMIPS: Amend DSP instructions related comments
  target/mips: Extend gen_scwp() functionality to support EVA
  target/mips: Correct the second argument type of cpu_supports_isa()
  target/mips: nanoMIPS: Rename macros for extracting 3-bit-coded GPR numbers
  target/mips: nanoMIPS: Remove an unused macro
  target/mips: nanoMIPS: Remove duplicate macro definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

decodetree: re.fullmatch was added in 3.4

Python 3 versions earlier than 3.4 do not have it, use the
same workaround that is in place for 3.0.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1548410602-16008-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

device-crash-test: Python 3 compatibility fix

Restrict whitelist entry stats in debug mode to be sorted only by
"count", since Python 3 does not implicitly support comparing
dictionaries.

Signed-off-by: Nisarg Shah <nshah@disroot.org>
Message-Id: <20190116183358.30287-1-nshah@disroot.org>
[ehabkost: removed 2 unnecessary hunks from patch]
[ehabkost: edited commit message]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-01-24' into staging

QAPI patches for 2019-01-24

# gpg: Signature made Thu 24 Jan 2019 14:25:19 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2019-01-24:
  json: Fix % handling when not interpolating
  qmp: Add examples to qom list, get, and set commands
  qapi: Eliminate indirection through qmp_event_get_func_emit()
  qapi: Belatedly update docs for commit 9c2f56e9f9d

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190124-pull-request' into staging

audio: pc speaker init fix, rework driver probing

# gpg: Signature made Thu 24 Jan 2019 13:19:52 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20190124-pull-request:
  audio: probe audio drivers by default
  audio: error message tweak
  audio: check for pulseaudio daemon pidfile
  audio: use try-sdl for openbsd
  audio: allow optional audio drivers.
  audio: use pkg-config
  audio: fix pc speaker init

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-patches-pull-request' into staging

- Some typo and UTF-8 fixes
- a ppc e6500 fix to remove duplicate SPR registering

# gpg: Signature made Thu 24 Jan 2019 12:48:05 GMT
# gpg:                using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-patches-pull-request:
  hw/i386/pc.c: fix one typo in function name
  virtio-net: Fix a typo
  ppc: e6500 registers SPR 604 twice
  contrib/gitdm: Fix a typo
  MAINTAINERS: Fix utf-8 mangling

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/berrange/tags/qio-next-pull-request' into staging

Merge qio 2010/01/24

Fixes accidental deletion of VNC server UNIX listener socket

# gpg: Signature made Thu 24 Jan 2019 12:24:43 GMT
# gpg:                using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/qio-next-pull-request:
  io: ensure UNIX client doesn't unlink server socket

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/qemu-cpu-models: Add MIPS/nanoMIPS QEMU supported CPU models

Add list of supported and preferred CPU models for MIPS32, MIPS64
and nanoMIPS hosts.

Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

qemu-doc: Add nanoMIPS ISA information

Add nanoMIPS information in qemu-doc.texi. An example of usage
is included.

Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

tests: tcg: mips: Remove old directories

Remove old test directories.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

tests: tcg: mips: Add two new Makefiles

Add Makefiles for two new direcitories.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

tests: tcg: mips: Move source files to new locations

MIPS TCG test will be organized by ISAs and ASEs in future.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

MAINTAINERS: Update MIPS sections

Remove Stefan Markovic as a reviewer for MIPS directories and
files, as he left Wave Computing.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

target/mips: Add I6500 core configuration

Add I6500 core configuration. Note that this configuration is
supported only on best-effort basis due to the lack of certain
features in QEMU.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

target/mips: nanoMIPS: Fix branch handling

Fix nanoMIPS branch handling.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

disas: nanoMIPS: Amend DSP instructions related comments

Amend some DSP instructions related comments.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

target/mips: Extend gen_scwp() functionality to support EVA

Extend gen_scwp() functionality to support EVA by adding an
additional argument, modify internals of the function to handle
new functionality, and accordingly change its invocations.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

target/mips: Correct the second argument type of cpu_supports_isa()

"insn_flags" bitfield was expanded from 32-bit to 64-bit in commit
f9c9cd63e3. However, this was not reflected on the second argument
of the function cpu_supports_isa(). By chance, this did not create
some wrong behavior, since the left-most halves of all instances of
the second argument are currently all zeros. However, this is still
a bug waiting to happen. Correct this by changing the type of the
second argument to be always 64-bit.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

target/mips: nanoMIPS: Rename macros for extracting 3-bit-coded GPR numbers

Rename macros for extracting 3-bit-coded GPR numbers, to achieve
better consistency with the nanoMIPS documentation.

Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

target/mips: nanoMIPS: Remove an unused macro

Remove a macro that is never used.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

target/mips: nanoMIPS: Remove duplicate macro definitions

Several macros were defined twice, with identical values, so
remove duplicates.

Previously added in 80845edf37b.

This reverts commit 6bfa9f4c9cf24d6cfaaa227722e9cdcca1ad6fe9.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190124-pull-request' into staging

input-linux: customizable grab toggle keys

# gpg: Signature made Thu 24 Jan 2019 10:35:29 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190124-pull-request:
  input-linux: customizable grab toggle keys

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

Changelog: No user-visible changes.

# gpg: Signature made Thu 24 Jan 2019 10:28:53 GMT
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  qemu-coroutine-sleep: drop CoSleepCB
  iotests: add 238 for throttling tgm unregister iothread segfault
  throttle-groups: fix restart coroutine iothread race

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

json: Fix % handling when not interpolating

Commit 8bca4613 added support for %% in json strings when interpolating,
but in doing so broke handling of % when not interpolating.

When parse_string() is fed a string token containing '%', it skips the
'%' regardless of ctxt->ap, i.e. even it's not interpolating.  If the
'%' is the string's last character, it fails an assertion.  Else, it
"merely" swallows the '%'.

Fix parse_string() to handle '%' specially only when interpolating.

To gauge the bug's impact, let's review non-interpolating users of this
parser, i.e. code passing NULL context to json_message_parser_init():

* tests/check-qjson.c, tests/test-qobject-input-visitor.c,
  tests/test-visitor-serialization.c

  Plenty of tests, but we still failed to cover the buggy case.

* monitor.c: QMP input

* qga/main.c: QGA input

* qobject_from_json():

  - qobject-input-visitor.c: JSON command line option arguments of
    -display and -blockdev

    Reproducer: -blockdev '{"%"}'

  - block.c: JSON pseudo-filenames starting with "json:"

    Reproducer: https://bugzilla.redhat.com/show_bug.cgi?id=1668244#c3

  - block/rbd.c: JSON key pairs

    Pseudo-filenames starting with "rbd:".

Command line, QMP and QGA input are trusted.

Filenames are trusted when they come from command line, QMP or HMP.
They are untrusted when they come from from image file headers.
Example: QCOW2 backing file name.  Note that this is *not* the security
boundary between host and guest.  It's the boundary between host and an
image file from an untrusted source.

Neither failing an assertion nor skipping a character in a filename of
your choice looks exploitable.  Note that we don't support compiling
with NDEBUG.

Fixes: 8bca4613e6cddd948895b8db3def05950463495b
Cc: qemu-stable@nongnu.org
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-Id: <20190102140535.11512-1-cfergeau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
[Commit message extended to discuss impact]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190123a' into staging

Migration pull 2019-01-23

New pages-per-second stat, a new test, and a bunch
of fixes and tidy ups.

# gpg: Signature made Wed 23 Jan 2019 15:54:48 GMT
# gpg:                using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A  9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20190123a:
  migration: introduce pages-per-second
  vmstate: constify SaveVMHandlers
  tests: add /vmstate/simple/array
  migration/rdma: unregister fd handler
  migration: unify error handling for process_incoming_migration_co
  migration: add more error handling for postcopy_ram_enable_notify
  migration: multifd_save_cleanup() can't fail, simplify
  migration: fix the multifd code when receiving less channels
  Fix segmentation fault when qemu_signal_init fails

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/i386/pc.c: fix one typo in function name

Rename pc_get_hotpug_handler to pc_get_hotplug_handler.

No functional change.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190124073626.20534-1-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

virtio-net: Fix a typo

Fixes: 2974e916df8
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190121181335.3326-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

ppc: e6500 registers SPR 604 twice

When using the e6500 CPU, QEMU generates a fatal error after
complaining about registering SPR 604 twice.

Building and testing with commit
9b2e891ec5ccdb4a7d583b77988848282606fdea shows the issue:

qemu-system-ppc64 --version
QEMU emulator version 3.1.50 (v3.1.0-456-g9b2e891ec5-dirty)
Copyright (c) 2003-2018 Fabrice Bellard and the QEMU Project developers

qemu-system-ppc64 -M none -cpu e6500
Error: Trying to register SPR 604 (25c) twice !

Signed-off-by: Jon Diekema <jon.diekema@ge.com>
Message-Id: <CALvuzg43uSodseEHjNaRcPFBKKPTY2mcppUbYgiLL=QO9RxX_Q@mail.gmail.com>
[removed duplicated mail header in the commit message]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

contrib/gitdm: Fix a typo

Typo comes from upstream git://git.lwn.net/gitdm.git.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190111155555.8270-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

MAINTAINERS: Fix utf-8 mangling

Patch incorrectly applied as 15ffb43cbf4.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190117161355.18204-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

io: ensure UNIX client doesn't unlink server socket

The qio_channel_socket_close method for was mistakenly unlinking the
UNIX server socket, even if the channel was a client connection. This
was not noticed with chardevs, since they never call close, but with the
VNC server, this caused the VNC server socket to be deleted after the
first client quit.

The qio_channel_socket_close method also needlessly reimplemented the
logic that already exists in socket_listen_cleanup(). Just call that
method directly, for listen sockets only.

This fixes a regression introduced in QEMU 3.0.0 with

  commit d66f78e1eaa832f73c771d9df1b606fe75d52a50
  Author: Pavel Balaev <mail@void.so>
  Date:   Mon May 21 19:17:35 2018 +0300

    Delete AF_UNIX socket after close

Fixes launchpad #1795100

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

audio: probe audio drivers by default

Add the drivers listed in audio_possible_drivers to audio_drv_list,
using the try-* variants.  That way the probable drivers are compiled by
default if possible.

Additioal tweaks:
  linux: reorder to: pa alsa sdl oss.
  *bsd: drop pa.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-7-kraxel@redhat.com

audio: error message tweak

Only print a message about the failed driver initialization in case it
was the driver explicitly requested by the user via QEMU_AUDIO_DRV=$drv.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190124112055.547-6-kraxel@redhat.com

audio: check for pulseaudio daemon pidfile

Check whenever the pulseaudio daemon pidfile is present before trying to
initialize the pulseaudio backend.  Just return NULL if that is not the
case, so qemu will check the next backend in line.

In case the user explicitly configured a non-default pulseaudio server
skip the check.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-5-kraxel@redhat.com

audio: use try-sdl for openbsd

Fixes the openbsd build failure with SDL disabled.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-4-kraxel@redhat.com

audio: allow optional audio drivers.

For those audio drivers which can be probed (sdl, alsa, pulse) add a
try-$name variants.  Unlike the variants without try- prefix they will
not error out on probe failure, the driver will be dropped from the list
instead.  Mainly useful for the audio_drv_list default values.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-3-kraxel@redhat.com

audio: use pkg-config

Use pkg-config to probe for alsa and pulseaudio.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190124112055.547-2-kraxel@redhat.com

audio: fix pc speaker init

Get rid of the pcspk_state global, allow pc speaker
be added using "-device isa-pcspk".

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190124110810.1040-1-kraxel@redhat.com

Merge remote-tracking branch 'remotes/stsquad/tags/pull-fpu-next-230119-2' into staging

Some more softfloat/fpu fixes

   - make check-softfloat
   - fixes for fp-bench
   - workaround broken host fma
   - compile fix for s390x/clang
   - fixed for bigendian (v2)
   - minor makefile tweaks (v2)

# gpg: Signature made Wed 23 Jan 2019 11:37:53 GMT
# gpg:                using RSA key FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-fpu-next-230119-2:
  tests/Makefile: add check-softfloat rule
  scripts/archive-source: include softfloat tests
  tests/Makefile: add floating point tests
  include/fpu/softfloat: Fix compilation with Clang on s390x
  softfloat: enforce softfloat if the host's FMA is broken
  tests/fp/platform.h: include config-host.h
  fp-test: fix signature of slow_clear_flags and qemu_clear_flags
  tests/fp/Makefile: do not use gcc-only -W flags
  berkeley-testfloat-3: pull changes
  fp-bench: remove wrong exponent raise in fill_random
  fp-bench: fix update_random_ops

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

qemu-coroutine-sleep: drop CoSleepCB

Drop CoSleepCB structure. It's actually unused.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190122143113.20331-1-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

iotests: add 238 for throttling tgm unregister iothread segfault

Hot-unplug a scsi-hd using an iothread.  The previous patch fixes a
segfault in this scenario.

This patch adds a regression test.

Suggested-by: Alberto Garcia <berto@igalia.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190114133257.30299-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

throttle-groups: fix restart coroutine iothread race

The following QMP command leads to a crash when iothreads are used:

  { 'execute': 'device_del', 'arguments': {'id': 'data'} }

The backtrace involves the queue restart coroutine where
tgm->throttle_state is a NULL pointer because
throttle_group_unregister_tgm() has already been called:

  (gdb) bt full
  #0  0x00005585a7a3b378 in qemu_mutex_lock_impl (mutex=0xffffffffffffffd0, file=0x5585a7bb3d54 "block/throttle-groups.c", line=412) at util/qemu-thread-posix.c:64
        err = <optimized out>
        __PRETTY_FUNCTION__ = "qemu_mutex_lock_impl"
        __func__ = "qemu_mutex_lock_impl"
  #1  0x00005585a79be074 in throttle_group_restart_queue_entry (opaque=0x5585a9de4eb0) at block/throttle-groups.c:412
        _f = <optimized out>
        data = 0x5585a9de4eb0
        tgm = 0x5585a9079440
        ts = 0x0
        tg = 0xffffffffffffff98
        is_write = false
        empty_queue = 255

This coroutine should not execute in the iothread after the throttle
group member has been unregistered!

The root cause is that the device_del code path schedules the restart
coroutine in the iothread while holding the AioContext lock.  Therefore
the iothread cannot execute the coroutine until after device_del
releases the lock - by this time it's too late.

This patch adds a reference count to ThrottleGroupMember so we can
synchronously wait for restart coroutines to complete.  Once they are
done it is safe to unregister the ThrottleGroupMember.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190114133257.30299-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

input-linux: customizable grab toggle keys

This patch adds a new option to the input-linux object:

grab-toggle=[key-combo]

The key combination can be one of the following:

* ctrl-ctrl
* alt-alt
* meta-meta
* scrolllock
* ctrl-scrolllock

The user can pick any of these key combinations. The VM's grab
of the evdev device will be toggled when the key combination is
pressed.

Any invalid setting will result in an error. No setting will
result in the current default of ctrl-ctrl.

The right and left ctrl key both work for Ctrl-Scrolllock.

If scrolllock is selected as one of the grab-toggle keys, it
will be entirely disabled and not passed to the guest at all.
This is to prevent enabling it while attempting to leave or enter
the VM. On the host, scrolllock can be disabled using xmodmap.

First, find the modifier that Scroll_Lock is bound to:

$ xmodmap -pm

Then, remove Scroll_Lock from it, replacing modX with the modifier:

$ xmodmap -e 'remove modX = Scroll_Lock'

If Scroll_Lock is not bound to any modifier, it is already disabled.

To save the changes, add them to your xinitrc.

Ryan El Kochta (1):
  input-linux: customizable grab toggle keys v5

Signed-off-by: Ryan El Kochta <relkochta@gmail.com>
Message-id: 20190123214555.12712-2-relkochta@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

qmp: Add examples to qom list, get, and set commands

Added examples for the qom-list, qom-get, and qom-set
commands in qapi misc JSON file.

Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20181228194442.3506-1-wainersm@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

qapi: Eliminate indirection through qmp_event_get_func_emit()

The qapi_event_send_FOO() functions emit events like this:

    QMPEventFuncEmit emit;

    emit = qmp_event_get_func_emit();
    if (!emit) {
        return;
    }

    qmp = qmp_event_build_dict("FOO");
    [put event arguments into @qmp...]

    emit(QAPI_EVENT_FOO, qmp);

The value of qmp_event_get_func_emit() depends only on the program:

* In qemu-system-FOO, it's always monitor_qapi_event_queue.

* In tests/test-qmp-event, it's always event_test_emit.

* In all other programs, it's always null.

This is exactly the kind of dependence the linker is supposed to
resolve; we don't actually need an indirection.

Note that things would fall apart if we linked more than one QAPI
schema into a single program: each set of qapi_event_send_FOO() uses
its own event enumeration, yet they share a single emit function.
Which takes the event enumeration as an argument.  Which one if
there's more than one?

More seriously: how does this work even now?  qemu-system-FOO wants
QAPIEvent, and passes a function taking that to
qmp_event_set_func_emit().  test-qmp-event wants test_QAPIEvent, and
passes a function taking that to qmp_event_set_func_emit().

It works by type trickery, of course:

    typedef void (*QMPEventFuncEmit)(unsigned event, QDict *dict);

    void qmp_event_set_func_emit(QMPEventFuncEmit emit);

    QMPEventFuncEmit qmp_event_get_func_emit(void);

We use unsigned instead of the enumeration type.  Relies on both
enumerations boiling down to unsigned, which happens to be true for
the compilers we use.

Clean this up as follows:

* Generate qapi_event_send_FOO() that call PREFIX_qapi_event_emit()
  instead of the value of qmp_event_set_func_emit().

* Generate a prototype for PREFIX_qapi_event_emit() into
  qapi-events.h.

* PREFIX_ is empty for qapi/qapi-schema.json, and test_ for
  tests/qapi-schema/qapi-schema-test.json.  It's qga_ for
  qga/qapi-schema.json, and doc-good- for
  tests/qapi-schema/doc-good.json, but those don't define any events.

* Rename monitor_qapi_event_queue() to qapi_event_emit() instead of
  passing it to qmp_event_set_func_emit().  This takes care of
  qemu-system-FOO.

* Rename event_test_emit() to test_qapi_event_emit() instead of
  passing it to qmp_event_set_func_emit().  This takes care of
  tests/test-qmp-event.

* Add a qapi_event_emit() that does nothing to stubs/monitor.c.  This
  takes care of all other programs that link code emitting QMP events.

* Drop qmp_event_set_func_emit(), qmp_event_get_func_emit().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181218182234.28876-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Commit message typos fixed]

qapi: Belatedly update docs for commit 9c2f56e9f9d

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181218182234.28876-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>

Merge remote-tracking branch 'remotes/xtensa/tags/20190122-xtensa' into staging

target/xtensa: zero overhead loops rework/helpers split

- change xtensa zero overhead loops implementation to avoid invalidation
  of TBs corresponding to previous loop body when a new loop is
  encountered;
- extract helper function groups from op_helper.c and move them into
  separate source files: exc_helper.c (exception helpers), win_helper.c
  (windowed registers helpers), fpu_helper.c (floating point helpers),
  mmu_helper.c (memory management helpers) and dbg_helper.c (native debug
  helpers).

# gpg: Signature made Tue 22 Jan 2019 18:44:17 GMT
# gpg:                using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg:                 aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB  17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20190122-xtensa:
  target/xtensa: move non-HELPER functions to helper.c
  target/xtensa: drop dump_state helper
  target/xtensa: extract interrupt and exception helpers
  target/xtensa: extract debug helpers
  target/xtensa: extract MMU helpers
  target/xtensa: extract windowed registers helpers
  target/xtensa: extract FPU helpers
  target/xtensa: rework zero overhead loops implementation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20190121-pull-request' into staging

ui: highres logo for sdl and gtk, bugfixes for vnc and egl.

# gpg: Signature made Mon 21 Jan 2019 14:11:39 GMT
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20190121-pull-request:
  egl-helpers.h: do not depend on X11 Window type, use EGLNativeWindowType
  vnc: detect and optimize pageflips
  sdl: add support for high resolution window icon
  ui: fix icon display for GTK frontend under GNOME Shell with Wayland
  ui: install logo icons to $prefix/share/icons

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: introduce pages-per-second

It introduces a new statistic, pages-per-second, as bandwidth or mbps is
not enough to measure the performance of posting pages out as we have
compression, xbzrle, which can significantly reduce the amount of the
data size, instead, pages-per-second is the one we want

Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20190111063732.10484-2-xiaoguangrong@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  With typo's Eric spotted fixed