OSDN Git Service
Jedrzej Jagielski [Fri, 14 Jan 2022 13:19:28 +0000 (13:19 +0000)]
i40e: Add sending commands in atomic context
Change functions:
- i40e_aq_add_macvlan
- i40e_aq_remove_macvlan
- i40e_aq_delete_element
- i40e_aq_add_vsi
- i40e_aq_update_vsi_params
to explicitly use i40e_asq_send_command_atomic(..., true)
instead of i40e_asq_send_command, as they use mutexes and do some
work in an atomic context.
Without this change setting vlan via netdev will fail with
call trace cased by bug "BUG: scheduling while atomic".
Signed-off-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jakub Kicinski [Wed, 26 Jan 2022 18:55:44 +0000 (10:55 -0800)]
i40e: remove enum i40e_client_state
It's not used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Joe Damato [Wed, 5 Jan 2022 15:49:13 +0000 (07:49 -0800)]
i40e: Remove unused RX realloc stat
After commit
1a557afc4dd5 ("i40e: Refactor receive routine"),
rx_stats.realloc_count is no longer being incremented, so remove it.
The debugfs string was left, but hardcoded to 0. This is intended to
prevent breaking any existing code / scripts that are parsing debugfs
for i40e.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mateusz Palczewski [Thu, 16 Dec 2021 12:31:13 +0000 (13:31 +0100)]
i40e: Disable hw-tc-offload feature on driver load
After loading driver hw-tc-offload is enabled by default.
Change the behaviour of driver to disable hw-tc-offload by default as
this is the expected state. Additionally since this impacts ntuple
feature state change the way of checking NETIF_F_HW_TC flag.
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
David S. Miller [Thu, 3 Feb 2022 14:10:35 +0000 (14:10 +0000)]
Merge branch 'dsa-mv88e6xxx-phylink_generic_validate'
Russell King says:
====================
net: dsa: mv88e6xxx: convert to phylink_generic_validate()
The overall objective of this series is to convert the mv88e6xxx DSA
driver to use phylink_generic_validate().
Patch 1 adds a new helper mv88e6352_g2_scratch_port_has_serdes() which
indicates whether an
88e6352 port has a serdes associated with it. This
is necessary as ports 4 and 5 will normally be in automedia mode, where
the CMODE field in the port status register will change e.g. between 15
(internal PHY) and 9 (1000base-X) depending on whether the serdes has
link.
The existing code caches the cmode field, and depending whether the
serdes has link at probe time, determines whether we allow things such
as the serdes statistics to be accessed. This means if the link isn't
up at probe time, the serdes is essentially unavailable.
Patch 1 addresses this by reading the pin configuration to find out
whether the serdes is attached to port 4 or port 5.
Patch 2 is a joint effort between myself and Marek Behún, adding the
supported interfaces and MAC capabilities to all mv88e6xxx supported
switch devices. This is slightly more restrictive than the original
code as we didn't used to care too much about the interface mode, but
with this we do - which is why we must know if there's a serdes
associated now.
Patch 3 switches mv88e6xxx to use the generic validation by removing
the initialisation of the phylink_validate pointer in the dsa_ops
struct.
Patch 4 updates the statistics code to use the new helper in patch 1,
so the serdes statistics are available even if the link was down at
driver probe time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Thu, 3 Feb 2022 13:30:52 +0000 (13:30 +0000)]
net: dsa: mv88e6xxx: improve
88e6352 serdes statistics detection
The decision whether to report serdes statistics currently depends on
the cached C_Mode value for the port, read at probe time or updated by
configuration. However, port 4 can be in "automedia" mode when it is
used as a serdes port, meaning it switches between the internal PHY and
the serdes, changing the read-only C_Mode value depending on which
first gains link. Consequently, the C_Mode value read at probe does not
accurately reflect whether the port has the serdes associated with it.
In "net: dsa: mv88e6xxx: add mv88e6352_g2_scratch_port_has_serdes()",
we added a way to read the hardware configuration to determine which
port has the serdes associated with it. Use this to determine which
port reports the serdes statistics.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Thu, 3 Feb 2022 13:30:47 +0000 (13:30 +0000)]
net: dsa: mv88e6xxx: convert to phylink_generic_validate()
Now that the mv88e6xxx chip drivers are supplying the supported
interfaces and MAC capabilities, switch the driver to use the generic
phylink validation implementation by removing our own validation
implementations. This causes DSA to call phylink_generic_validate()
on our behalf.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Thu, 3 Feb 2022 13:30:42 +0000 (13:30 +0000)]
net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities
Populate the supported interfaces and MAC capabilities for the
Marvell MV88E6xxx DSA switches in preparation to using these for the
validation functionality.
Patch co-authored by Marek.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org> [ fixed 6341 and 6393x ]
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Thu, 3 Feb 2022 13:30:36 +0000 (13:30 +0000)]
net: dsa: mv88e6xxx: add mv88e6352_g2_scratch_port_has_serdes()
Read the hardware configuration to determine which port is attached
to the serdes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Feb 2022 14:05:57 +0000 (14:05 +0000)]
Merge branch 'dsa-mv88e6xxx-port-isolation'
Tobias Waldekranz says:
====================
net: dsa: mv88e6xxx: Improve standalone port isolation
The ideal isolation between standalone ports satisfies two properties:
1. Packets from one standalone port must not be forwarded to any other
port.
2. Packets from a standalone port must be sent to the CPU port.
mv88e6xxx solves (1) by isolating standalone ports using the PVT. Up
to this point though, (2) has not guaranteed; as the ATU is still
consulted, there is a chance that incoming packets never reach the CPU
if its DA has previously been used as the SA of an earlier packet (see
1/5 for more details). This is typically not a problem, except for one
very useful setup in which switch ports are looped in order to run the
bridge kselftests in tools/testing/selftests/net/forwarding. This
series attempts to solve (2).
Ideally, we could simply use the "ForceMap" bit of more modern chips
(Agate and newer) to classify all incoming packets as MGMT. This is
not available on older silicon that is still widely used (Opal Plus
chips like the 6097 for example).
Instead, this series takes a two pronged approach:
1/5: Always clear MapDA on standalone ports to make sure that no ATU
entry can lead packets astray. This solves (2) for single-chip
systems.
2/5: Trivial prep work for 4/5.
3/5: Trivial prep work for 4/5.
4/5: On multi-chip systems though, this is not enough. On the incoming
chip, the packet will be forced out towards the CPU thanks to
1/5, but on any intermediate chips the ATU is still consulted. We
override this behavior by marking the reserved standalone VID (0)
as a policy VID, the DSA ports' VID policy is set to TRAP. This
will cause the packet to be reclassified as MGMT on the first
intermediate chip, after which it's a straight shot towards the
CPU.
Finally, we allow more tests to be run on mv88e6xxx:
5/5: The bridge_vlan{,un}aware suites sets an ageing_time of 10s on
the bridge it creates, but mv88e6xxx has a minimum supported time
of 15s. Allow this time to be overridden in forwarding.config.
With this series in place, mv88e6xxx passes the following kselftest
suites:
- bridge_port_isolation.sh
- bridge_sticky_fdb.sh
- bridge_vlan_aware.sh
- bridge_vlan_unaware.sh
v1 -> v2:
- Wording/spelling (Vladimir)
- Use standard iterator in dsa_switch_upstream_port (Vladimir)
- Limit enabling of VTU port policy to downstream DSA ports (Vladimir)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz [Thu, 3 Feb 2022 10:16:57 +0000 (11:16 +0100)]
selftests: net: bridge: Parameterize ageing timeout
Allow the ageing timeout that is set on bridges to be customized from
forwarding.config. This allows the tests to be run on hardware which
does not support a 10s timeout (e.g. mv88e6xxx).
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz [Thu, 3 Feb 2022 10:16:56 +0000 (11:16 +0100)]
net: dsa: mv88e6xxx: Improve multichip isolation of standalone ports
Given that standalone ports are now configured to bypass the ATU and
forward all frames towards the upstream port, extend the ATU bypass to
multichip systems.
Load VID 0 (standalone) into the VTU with the policy bit set. Since
VID 4095 (bridged) is already loaded, we now know that all VIDs in use
are always available in all VTUs. Therefore, we can safely enable
802.1Q on DSA ports.
Setting the DSA ports' VTU policy to TRAP means that all incoming
frames on VID 0 will be classified as MGMT - as a result, the ATU is
bypassed on all subsequent switches.
With this isolation in place, we are able to support configurations
that are simultaneously very quirky and very useful. Quirky because it
involves looping cables between local switchports like in this
example:
CPU
| .------.
.---0---. | .----0----.
| sw0 | | | sw1 |
'-1-2-3-' | '-1-2-3-4-'
$ @ '---' $ @ % %
We have three physically looped pairs ($, @, and %).
This is very useful because it allows us to run the kernel's
kselftests for the bridge on mv88e6xxx hardware.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz [Thu, 3 Feb 2022 10:16:55 +0000 (11:16 +0100)]
net: dsa: mv88e6xxx: Enable port policy support on 6097
This chip has support for the same per-port policy actions found in
later versions of LinkStreet devices.
Fixes:
f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz [Thu, 3 Feb 2022 10:16:54 +0000 (11:16 +0100)]
net: dsa: mv88e6xxx: Support policy entries in the VTU
A VTU entry with policy enabled is used in combination with a port's
VTU policy setting to override normal switching behavior for frames
assigned to the entry's VID.
A typical example is to Treat all frames in a particular VLAN as
control traffic, and trap them to the CPU. In which case the relevant
user port's VTU policy would be set to TRAP.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz [Thu, 3 Feb 2022 10:16:53 +0000 (11:16 +0100)]
net: dsa: mv88e6xxx: Improve isolation of standalone ports
Clear MapDA on standalone ports to bypass any ATU lookup that might
point the packet in the wrong direction. This means that all packets
are flooded using the PVT config. So make sure that standalone ports
are only allowed to communicate with the local upstream port.
Here is a scenario in which this is needed:
CPU
| .----.
.---0---. | .--0--.
| sw0 | | | sw1 |
'-1-2-3-' | '-1-2-'
'---'
- sw0p1 and sw1p1 are bridged
- sw0p2 and sw1p2 are in standalone mode
- Learning must be enabled on sw0p3 in order for hardware forwarding
to work properly between bridged ports
1. A packet with SA :aa comes in on sw1p2
1a. Egresses sw1p0
1b. Ingresses sw0p3, ATU adds an entry for :aa towards port 3
1c. Egresses sw0p0
2. A packet with DA :aa comes in on sw0p2
2a. If an ATU lookup is done at this point, the packet will be
incorrectly forwarded towards sw0p3. With this change in place,
the ATU is bypassed and the packet is forwarded in accordance
with the PVT, which only contains the CPU port.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Feb 2022 14:00:58 +0000 (14:00 +0000)]
Merge branch 'ptp-virtual-clock-improvements'
Miroslav Lichvar says:
====================
Virtual PTP clock improvements and fix
v2:
- dropped patch changing initial time of virtual clocks
The first patch fixes an oops when unloading a driver with PTP clock and
enabled virtual clocks.
The other patches add missing features to make synchronization with
virtual clocks work as well as with the physical clock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Miroslav Lichvar [Wed, 2 Feb 2022 09:33:58 +0000 (10:33 +0100)]
ptp: add getcrosststamp() to virtual clocks.
If the physical clock supports cross timestamping (it has the
getcrosststamp() function), provide a wrapper in the virtual clock to
enable cross timestamping.
This adds support for the PTP_SYS_OFFSET_PRECISE ioctl.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miroslav Lichvar [Wed, 2 Feb 2022 09:33:57 +0000 (10:33 +0100)]
ptp: add gettimex64() to virtual clocks.
If the physical clock has the gettimex64() function, provide a
gettimex64() wrapper in the virtual clock to enable more accurate
and stable synchronization.
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miroslav Lichvar [Wed, 2 Feb 2022 09:33:56 +0000 (10:33 +0100)]
ptp: increase maximum adjustment of virtual clocks.
Increase the maximum frequency offset of virtual clocks to 50% to enable
faster slewing corrections.
This value cannot be represented as scaled ppm when long has 32 bits,
but that is already the case for other drivers, even those that provide
the adjfine() function, i.e. 32-bit applications are expected to check
for the limit.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miroslav Lichvar [Wed, 2 Feb 2022 09:33:55 +0000 (10:33 +0100)]
ptp: unregister virtual clocks when unregistering physical clock.
When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.
This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:
BUG: unable to handle page fault for address:
ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
timecounter_read+0xf/0x50
ptp_vclock_refresh+0x2c/0x50
? ptp_clock_release+0x40/0x40
ptp_aux_kworker+0x17/0x30
kthread_worker_fn+0x9b/0x240
? kthread_should_park+0x30/0x30
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Fixes:
73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 31 Jan 2022 16:40:01 +0000 (08:40 -0800)]
page_pool: Refactor page_pool to enable fragmenting after allocation
This change is meant to permit a driver to perform "fragmenting" of the
page from within the driver instead of the current model which requires
pre-partitioning the page. The main motivation behind this is to support
use cases where the page will be split up by the driver after DMA instead
of before.
With this change it becomes possible to start using page pool to replace
some of the existing use cases where multiple references were being used
for a single page, but the number needed was unknown as the size could be
dynamic.
For example, with this code it would be possible to do something like
the following to handle allocation:
page = page_pool_alloc_pages();
if (!page)
return NULL;
page_pool_fragment_page(page, DRIVER_PAGECNT_BIAS_MAX);
rx_buf->page = page;
rx_buf->pagecnt_bias = DRIVER_PAGECNT_BIAS_MAX;
Then we would process a received buffer by handling it with:
rx_buf->pagecnt_bias--;
Once the page has been fully consumed we could then flush the remaining
instances with:
if (page_pool_defrag_page(page, rx_buf->pagecnt_bias))
continue;
page_pool_put_defragged_page(pool, page -1, !!budget);
The general idea is that we want to have the ability to allocate a page
with excess fragment count and then trim off the unneeded fragments.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Feb 2022 11:47:07 +0000 (11:47 +0000)]
Merge branch 'dsa-phylink_generic_validate'
Russell King says:
====================
Trivial DSA conversions to phylink_generic_validate()
This series converts five DSA drivers to use phylink_generic_validate().
No feedback or testing reports were received from the CFT posting.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Wed, 2 Feb 2022 10:24:28 +0000 (10:24 +0000)]
net: dsa: xrs700x: convert to phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the xrs700x
family of DSA switches and remove the old validate implementation to
allow DSA to use phylink_generic_validate() for this switch driver.
According to commit
ee00b24f32eb ("net: dsa: add Arrow SpeedChips
XRS700x driver") the switch supports one RMII port and up to three
RGMII ports. This commit assumes that port 0 is the RMII port and the
remainder are RGMII.
This commit also results in the Autoneg bit being set in the ethtool
link modes, which wasn't in the original; if this switch supports
RGMII to a 10/100/1G PHY, then surely we want to allow Autoneg on the
PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Wed, 2 Feb 2022 10:24:23 +0000 (10:24 +0000)]
net: dsa: qca8k: convert to phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the QCA8K
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
In making this change, we bring consistency to the ethtool linkmodes
that phylink's validate step produces, thereby following the expected
behaviour as the phylink documentation has explained. Specifically, the
ethtool 1000baseX_Full capability is now permitted for all interface
modes, as it is a property of the PHY driver whether 1000baseX fiber
connections can be supported.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Wed, 2 Feb 2022 10:24:18 +0000 (10:24 +0000)]
net: dsa: ksz8795: convert to phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the
Microchip KSZ8795 DSA switch and remove the old validate implementation
to allow DSA to use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Wed, 2 Feb 2022 10:24:13 +0000 (10:24 +0000)]
net: dsa: bcm_sf2: convert to phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the bcm_sf2
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
The exclusion of Gigabit linkmodes for MII and Reverse MII links is
handled within phylink_generic_validate() in phylink, so there is no
need to make them conditional on the interface mode in the driver.
Thanks to Florian Fainelli for suggesting how to populate the supported
interfaces.
Link: https://lore.kernel.org/r/3b3fed98-0c82-99e9-dc72-09fe01c2bcf3@gmail.com
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Wed, 2 Feb 2022 10:24:08 +0000 (10:24 +0000)]
net: dsa: ar9331: convert to phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the AR9331
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Feb 2022 11:44:08 +0000 (11:44 +0000)]
Merge branch 'mptcp-next'
Mat Martineau says:
====================
mptcp: Miscellaneous changes for 5.18
Patch 1 has some minor cleanup in mptcp_write_options().
Patch 2 moves a rarely-needed branch to optimize mptcp_write_options().
Patch 3 adds a comment explaining which combinations of MPTCP option
headers are expected.
Patch 4 adds a pr_debug() for the MPTCP_RST option.
Patches 5-7 allow setting MPTCP_PM_ADDR_FLAG_FULLMESH with the "set
flags" netlink command. This allows changing the behavior of existing
path manager endpoints. The flag was previously only set at endpoint
creation time. Associated selftests also updated.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:43 +0000 (17:03 -0800)]
selftests: mptcp: add fullmesh setting tests
This patch added the fullmesh setting and clearing selftests in
mptcp_join.sh.
Now we can set both backup and fullmesh flags, so avoid using the
words 'backup' and 'bkup'.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:42 +0000 (17:03 -0800)]
selftests: mptcp: set fullmesh flag in pm_nl_ctl
This patch added the fullmesh flag setting and clearing support in
pm_nl_ctl:
# pm_nl_ctl set ip flags fullmesh
# pm_nl_ctl set ip flags nofullmesh
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:41 +0000 (17:03 -0800)]
mptcp: set fullmesh flag in pm_netlink
This patch added the fullmesh flag setting support in pm_netlink.
If the fullmesh flag of the address is changed, remove all the related
subflows, update the fullmesh flag and create subflows again.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:40 +0000 (17:03 -0800)]
mptcp: print out reset infos of MP_RST
This patch printed out the reset infos, reset_transient and reset_reason,
of MP_RST in mptcp_parse_option() to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Thu, 3 Feb 2022 01:03:39 +0000 (17:03 -0800)]
mptcp: clarify when options can be used
RFC8684 doesn't seem to clearly specify which MPTCP options can be used
together.
Some options are mutually exclusive -- e.g. MP_CAPABLE and MP_JOIN --,
some can be used together -- e.g. DSS + MP_PRIO --, some can but we
prefer not to -- e.g. DSS + ADD_ADDR -- and some have to be used
together at some points -- e.g. MP_FAIL and DSS.
We need to clarify this as a base before allowing other modifications.
For example, does it make sense to send a RM_ADDR with an MPC or MPJ?
This remains open for possible future discussions.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Thu, 3 Feb 2022 01:03:38 +0000 (17:03 -0800)]
mptcp: reduce branching when writing MP_FAIL option
MP_FAIL should be use in very rare cases, either when the TCP RST flag
is set -- with or without an MP_RST -- or with a DSS, see
mptcp_established_options().
Here, we do the same in mptcp_write_options().
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:37 +0000 (17:03 -0800)]
mptcp: move the declarations of ssk and subflow
Move the declarations of ssk and subflow in MP_FAIL and MP_PRIO to the
beginning of the function mptcp_write_options().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 3 Feb 2022 05:13:51 +0000 (21:13 -0800)]
Merge branch 'net-ipa-support-variable-rx-buffer-size'
Alex Elder says:
====================
net: ipa: support variable RX buffer size
Specify the size of receive buffers used for RX endpoints in the
configuration data, rather than using 8192 bytes for all of them.
Increase the size of the AP receive buffer for the modem to 32KB.
====================
Link: https://lore.kernel.org/r/20220201153737.601149-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Tue, 1 Feb 2022 15:37:37 +0000 (09:37 -0600)]
net: ipa: set IPA v4.11 AP<-modem RX buffer size to 32KB
Increase the receive buffer size used for data received from the
modem to 32KB, to improve download performance by allowing much
greater aggregation.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Tue, 1 Feb 2022 15:37:36 +0000 (09:37 -0600)]
net: ipa: define per-endpoint receive buffer size
Allow RX endpoints to have differing receive buffer sizes. Define
the receive buffer size in the configuration data, and use that
rather than IPA_RX_BUFFER_SIZE when configuring the endpoint.
Add verification in ipa_endpoint_data_valid_one() that the receive
buffer specified for AP RX endpoints is both big enough to handle at
least one full packet, and not so big in an aggregating endpoint
that its size can't be represented when programming the hardware.
Move aggr_byte_limit_max() up in "ipa_endpoint.c" so it can be used
earlier in the file without a forward-reference.
Initially we'll just keep the 8KB receive buffer size already in use
for all AP RX endpoints..
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafael J. Wysocki [Wed, 2 Feb 2022 14:19:20 +0000 (15:19 +0100)]
drivers: net: Replace acpi_bus_get_device()
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/11918902.O9o76ZdvQC@kreacher
Link: https://lore.kernel.org/r/11920660.O9o76ZdvQC@kreacher
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Akhmat Karakotov [Fri, 28 Jan 2022 19:26:21 +0000 (22:26 +0300)]
tcp: Use BPF timeout setting for SYN ACK RTO
When setting RTO through BPF program, some SYN ACK packets were unaffected
and continued to use TCP_TIMEOUT_INIT constant. This patch adds timeout
option to struct request_sock. Option is initialized with TCP_TIMEOUT_INIT
and is reassigned through BPF using tcp_timeout_init call. SYN ACK
retransmits now use newly added timeout option.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Acked-by: Martin KaFai Lau <kafai@fb.com>
v2:
- Add timeout option to struct request_sock. Do not call
tcp_timeout_init on every syn ack retransmit.
v3:
- Use unsigned long for min. Bound tcp_timeout_init to TCP_RTO_MAX.
v4:
- Refactor duplicate code by adding reqsk_timeout function.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 2 Feb 2022 14:44:00 +0000 (14:44 +0000)]
Merge branch 'qca8k-mdio'
Ansuel Smith says:
====================
Add support for qca8k mdio rw in Ethernet packet
The main reason for this is that we notice some routing problem in the
switch and it seems assisted learning is needed. Considering mdio is
quite slow due to the indirect write using this Ethernet alternative way
seems to be quicker.
The qca8k switch supports a special way to pass mdio read/write request
using specially crafted Ethernet packet.
This works by putting some defined data in the Ethernet header where the
mac source and dst should be placed. The Ethernet type header is set to qca
header and is set to a mdio read/write type.
This is used to communicate to the switch that this is a special packet
and should be parsed differently.
Currently we use Ethernet packet for
- MIB counter
- mdio read/write configuration
- phy read/write for each port
Current implementation of this use completion API to wait for the packet
to be processed by the tagger and has a timeout that fallback to the
legacy mdio way and mutex to enforce one transaction at time.
We now have connect()/disconnect() ops for the tagger. They are used to
allocate priv data in the dsa priv. The header still has to be put in
global include to make it usable by a dsa driver.
They are called when the tag is connect to the dst and the data is freed
using discconect on tagger change.
(if someone wonder why the bind function is put at in the general setup
function it's because tag is set in the cpu port where the notifier is
still not available and we require the notifier to sen the
tag_proto_connect() event.
We now have a tag_proto_connect() for the dsa driver used to put
additional data in the tagger priv (that is actually the dsa priv).
This is called using a switch event DSA_NOTIFIER_TAG_PROTO_CONNECT.
Current use for this is adding handler for the Ethernet packet to keep
the tagger code as dumb as possible.
The tagger priv implement only the handler for the special packet. All the
other stuff is placed in the qca8k_priv and the tagger has to access
it under lock.
We use the new API from Vladimir to track if the master port is
operational or not. We had to track many thing to reach a usable state.
Checking if the port is UP is not enough and tracking a NETDEV_CHANGE is
also not enough since it use also for other task. The correct way was
both track for interface UP and if a qdisc was assigned to the
interface. That tells us the port (and the tagger indirectly) is ready
to accept and process packet.
I tested this with multicpu port and with port6 set as the unique port and
it's sad.
It seems they implemented this feature in a bad way and this is only
supported with cpu port0. When cpu port6 is the unique port, the switch
doesn't send ack packet. With multicpu port, packet ack are not duplicated
and only cpu port0 sends them. This is the same for the MIB counter.
For this reason this feature is enabled only when cpu port0 is enabled and
operational.
v8:
- Reworked to rolling counter for the seq_num
- Reworked the hi/lo cache patch
- Fix multiple missing skb free and mutex lock errors
- Fix some spelling mistake
- Add macro build check for mgmt packet size
- Change some struct naming to make them more descriptive
v7:
- Rebase on net-next changes
- Add bulk patches to speedup this even more
v6:
- Fix some error in ethtool handler caused by rebase/cleanup
v5:
- Adapt to new API fixes
- Fix a wrong logic for noop
- Add additional lock for master_state change
- Limit mdio Ethernet to cpu port0 (switch limitation)
- Add priority to these special packet
- Move mdio cache to qca8k_priv
v4:
- Remove duplicate patch sent by mistake.
v3:
- Include MIB with Ethernet packet.
- Include phy read/write with Ethernet packet.
- Reorganize code with new API.
- Introuce master tracking by Vladimir
v2:
- Address all suggestion from Vladimir.
Try to generilize this with connect/disconnect function from the
tagger and tag_proto_connect for the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:35 +0000 (01:03 +0100)]
net: dsa: qca8k: introduce qca8k_bulk_read/write function
Introduce qca8k_bulk_read/write() function to use mgmt Ethernet way to
read/write packet in bulk. Make use of this new function in the fdb
function and while at it reduce the reg for fdb_read from 4 to 3 as the
max bit for the ARL(fdb) table is 83 bits.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:34 +0000 (01:03 +0100)]
net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet
mgmt Ethernet packet can read/write up to 16byte at times. The len reg
is limited to 15 (0xf). The switch actually sends and accepts data in 4
different steps of len values.
Len steps:
- 0: nothing
- 1-4: first 4 byte
- 5-6: first 12 byte
- 7-15: all 16 byte
In the alloc skb function we check if the len is 16 and we fix it to a
len of 15. It the read/write function interest to extract the real asked
data. The tagger handler will always copy the fully 16byte with a READ
command. This is useful for some big regs like the fdb reg that are
more than 4byte of data. This permits to introduce a bulk function that
will send and request the entire entry in one go.
Write function is changed and it does now require to pass the pointer to
val to also handle array val.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:33 +0000 (01:03 +0100)]
net: dsa: qca8k: cache lo and hi for mdio write
From Documentation, we can cache lo and hi the same way we do with the
page. This massively reduce the mdio write as 3/4 of the time as we only
require to write the lo or hi part for a mdio write.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:32 +0000 (01:03 +0100)]
net: dsa: qca8k: move page cache to driver priv
There can be multiple qca8k switch on the same system. Move the static
qca8k_current_page to qca8k_priv and make it specific for each switch.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:31 +0000 (01:03 +0100)]
net: dsa: qca8k: add support for phy read/write with mgmt Ethernet
Use mgmt Ethernet also for phy read/write if availabale. Use a different
seq number to make sure we receive the correct packet.
On any error, we fallback to the legacy mdio read/write.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:30 +0000 (01:03 +0100)]
net: dsa: qca8k: add support for mib autocast in Ethernet packet
The switch can autocast MIB counter using Ethernet packet.
Add support for this and provide a handler for the tagger.
The switch will send packet with MIB counter for each port, the switch
will use completion API to wait for the correct packet to be received
and will complete the task only when each packet is received.
Although the handler will drop all the other packet, we still have to
consume each MIB packet to complete the request. This is done to prevent
mixed data with concurrent ethtool request.
connect_tag_protocol() is used to add the handler to the tag_qca tagger,
master_state_change() use the MIB lock to make sure no MIB Ethernet is
in progress.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:29 +0000 (01:03 +0100)]
net: dsa: qca8k: add support for mgmt read/write in Ethernet packet
Add qca8k side support for mgmt read/write in Ethernet packet.
qca8k supports some specially crafted Ethernet packet that can be used
for mgmt read/write instead of the legacy method uart/internal mdio.
This add support for the qca8k side to craft the packet and enqueue it.
Each port and the qca8k_priv have a special struct to put data in it.
The completion API is used to wait for the packet to be received back
with the requested data.
The various steps are:
1. Craft the special packet with the qca hdr set to mgmt read/write
mode.
2. Set the lock in the dedicated mgmt struct.
3. Increment the seq number and set it in the mgmt pkt
4. Reinit the completion.
5. Enqueue the packet.
6. Wait the packet to be received.
7. Use the data set by the tagger to complete the mdio operation.
If the completion timeouts or the ack value is not true, the legacy
mdio way is used.
It has to be considered that in the initial setup mdio is still used and
mdio is still used until DSA is ready to accept and tag packet.
tag_proto_connect() is used to fill the required handler for the tagger
to correctly parse and elaborate the special Ethernet mdio packet.
Locking is added to qca8k_master_change() to make sure no mgmt Ethernet
are in progress.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:28 +0000 (01:03 +0100)]
net: dsa: qca8k: add tracking state of master port
MDIO/MIB Ethernet require the master port and the tagger availabale to
correctly work. Use the new api master_state_change to track when master
is operational or not and set a bool in qca8k_priv.
We cache the first cached master available and we check if other cpu
port are operational when the cached one goes down.
This cached master will later be used by mdio read/write and mib request to
correctly use the working function.
qca8k implementation for MDIO/MIB Ethernet is bad. CPU port0 is the only
one that answers with the ack packet or sends MIB Ethernet packets. For
this reason the master_state_change ignore CPU port6 and only checks
CPU port0 if it's operational and enables this mode.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:27 +0000 (01:03 +0100)]
net: dsa: tag_qca: add support for handling mgmt and MIB Ethernet packet
Add connect/disconnect helper to assign private struct to the DSA switch.
Add support for Ethernet mgmt and MIB if the DSA driver provide an handler
to correctly parse and elaborate the data.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:26 +0000 (01:03 +0100)]
net: dsa: tag_qca: add define for handling MIB packet
Add struct to correctly parse a mib Ethernet packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:25 +0000 (01:03 +0100)]
net: dsa: tag_qca: add define for handling mgmt Ethernet packet
Add all the required define to prepare support for mgmt read/write in
Ethernet packet. Any packet of this type has to be dropped as the only
use of these special packet is receive ack for an mgmt write request or
receive data for an mgmt read request.
A struct is used that emulates the Ethernet header but is used for a
different purpose.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:24 +0000 (01:03 +0100)]
net: dsa: tag_qca: enable promisc_on_master flag
Ethernet MDIO packets are non-standard and DSA master expects the first
6 octets to be the MAC DA. To address these kind of packet, enable
promisc_on_master flag for the tagger.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:23 +0000 (01:03 +0100)]
net: dsa: tag_qca: move define to include linux/dsa
Move tag_qca define to include dir linux/dsa as the qca8k require access
to the tagger define to support in-band mdio read/write using ethernet
packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:22 +0000 (01:03 +0100)]
net: dsa: tag_qca: convert to FIELD macro
Convert driver to FIELD macro to drop redundant define.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 2 Feb 2022 00:03:21 +0000 (01:03 +0100)]
net: dsa: replay master state events in dsa_tree_{setup,teardown}_master
In order for switch driver to be able to make simple and reliable use of
the master tracking operations, they must also be notified of the
initial state of the DSA master, not just of the changes. This is
because they might enable certain features only during the time when
they know that the DSA master is up and running.
Therefore, this change explicitly checks the state of the DSA master
under the same rtnl_mutex as we were holding during the
dsa_master_setup() and dsa_master_teardown() call. The idea being that
if the DSA master became operational in between the moment in which it
became a DSA master (dsa_master_setup set dev->dsa_ptr) and the moment
when we checked for the master being up, there is a chance that we
would emit a ->master_state_change() call with no actual state change.
We need to avoid that by serializing the concurrent netdevice event with
us. If the netdevice event started before, we force it to finish before
we begin, because we take rtnl_lock before making netdev_uses_dsa()
return true. So we also handle that early event and do nothing on it.
Similarly, if the dev_open() attempt is concurrent with us, it will
attempt to take the rtnl_mutex, but we're holding it. We'll see that
the master flag IFF_UP isn't set, then when we release the rtnl_mutex
we'll process the NETDEV_UP notifier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 2 Feb 2022 00:03:20 +0000 (01:03 +0100)]
net: dsa: provide switch operations for tracking the master state
Certain drivers may need to send management traffic to the switch for
things like register access, FDB dump, etc, to accelerate what their
slow bus (SPI, I2C, MDIO) can already do.
Ethernet is faster (especially in bulk transactions) but is also more
unreliable, since the user may decide to bring the DSA master down (or
not bring it up), therefore severing the link between the host and the
attached switch.
Drivers needing Ethernet-based register access already should have
fallback logic to the slow bus if the Ethernet method fails, but that
fallback may be based on a timeout, and the I/O to the switch may slow
down to a halt if the master is down, because every Ethernet packet will
have to time out. The driver also doesn't have the option to turn off
Ethernet-based I/O momentarily, because it wouldn't know when to turn it
back on.
Which is where this change comes in. By tracking NETDEV_CHANGE,
NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know
the exact interval of time during which this interface is reliably
available for traffic. Provide this information to switches so they can
use it as they wish.
An helper is added dsa_port_master_is_operational() to check if a master
port is operational.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Mon, 31 Jan 2022 11:10:54 +0000 (11:10 +0000)]
sfc: The size of the RX recycle ring should be more flexible
Ideally the size would depend on the link speed, but the recycle
ring is created when the interface is brought up before the driver
knows the link speed. So size it for the maximum speed of a given NIC.
PowerPC is only supported on SFN7xxx and SFN8xxx NICs.
With this patch on a 40G NIC the number of calls to alloc_pages and
friends went down from about 18% to under 2%.
On a 10G NIC the number of calls to alloc_pages and friends went down
from about 15% to 0 (perf did not capture any calls during the 60
second test).
On a 100G NIC the number of calls to alloc_pages and friends went down
from about 23% to 4%.
Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220131111054.cp4f6foyinaarwbn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Mon, 31 Jan 2022 18:37:22 +0000 (19:37 +0100)]
r8169: support L1.2 control on RTL8168h
According to Realtek RTL8168h supports the same L1.2 control as RTL8125.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4784d5ce-38ac-046a-cbfa-5fdd9773f820@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 31 Jan 2022 23:33:57 +0000 (15:33 -0800)]
net: allow SO_MARK with CAP_NET_RAW via cmsg
There's not reason SO_MARK would be allowed via setsockopt()
and not via cmsg, let's keep the two consistent. See
commit
079925cce1d0 ("net: allow SO_MARK with CAP_NET_RAW")
for justification why NET_RAW -> SO_MARK is safe.
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220131233357.52964-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Tue, 1 Feb 2022 14:18:44 +0000 (14:18 +0000)]
Merge branch 'lan966x-ptp'
Horatiu Vultur says:
====================
net: lan966x: Add PTP Hardward Clock support
Add support for PTP Hardware Clock (PHC) for lan966x. The switch supports
both PTP 1-step and 2-step modes.
v1->v2:
- fix commit messages
- reduce the scope of the lock ptp_lock inside the function
lan966x_ptp_hwtstamp_set
- the rx timestamping is always enabled for all packages
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:22 +0000 (11:01 +0100)]
net: lan966x: Implement get_ts_info
Implement the function get_ts_info in ethtool_ops which is needed to get
the HW capabilities for timestamping.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:21 +0000 (11:01 +0100)]
net: lan966x: Add support for ptp interrupts
When doing 2-step timestamping the HW will generate an interrupt when it
managed to timestamp a frame. It is the SW responsibility to read it
from the FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:20 +0000 (11:01 +0100)]
net: lan966x: Update extraction/injection for timestamping
Update both the extraction and injection to do timestamping of the
frames. The extraction is always doing the timestamping while for
injection is doing the timestamping only if it is configured.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:19 +0000 (11:01 +0100)]
net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP
Implement the ioctl callbacks SIOCSHWTSTAMP and SIOCGHWTSTAMP to allow
to configure the ports to enable/disable timestamping for TX. The RX
timestamping is always enabled. The HW is capable to run both 1-step
timestamping and 2-step timestamping.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:18 +0000 (11:01 +0100)]
net: lan966x: Add support for ptp clocks
The lan966x has 3 PHC. Enable each of them, for now all the
timestamping is happening on the first PHC.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:17 +0000 (11:01 +0100)]
net: lan966x: Add registers that are use for ptp functionality
Add the registers that will be used to configure the PHC in the HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:16 +0000 (11:01 +0100)]
dt-bindings: net: lan966x: Extend with the ptp interrupt
Extend dt-bindings for lan966x with ptp interrupt. This is generated
when doing 2-step timestamping and the timestamp can be read from the
FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Mon, 31 Jan 2022 15:42:09 +0000 (16:42 +0100)]
selftests: fib rule: Don't echo modified sysctls
Run sysctl in quiet mode. Echoing the modified sysctl doesn't bring any
useful information.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Mon, 31 Jan 2022 15:42:06 +0000 (16:42 +0100)]
selftests: fib rule: Log test description
All callers of fib_rule6_test_match_n_redirect() and
fib_rule4_test_match_n_redirect() pass a third argument containing a
description of the test being run. Instead of ignoring this argument,
let's use it for logging instead of printing a truncated version of the
command.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Mon, 31 Jan 2022 15:42:04 +0000 (16:42 +0100)]
selftests: fib rule: Drop erroneous TABLE variable
The fib_rule6_del_by_pref() and fib_rule4_del_by_pref() functions use
an uninitialised $TABLE variable. They should use $RTABLE instead.
This doesn't alter the result of the test, as it just makes the grep
command less specific (but since the script always uses the same table
number, that doesn't really matter).
Let's fix it anyway and, while there, specify the filtering parameters
directly in 'ip -X rule show' to avoid the extra grep command entirely.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Mon, 31 Jan 2022 15:42:01 +0000 (16:42 +0100)]
selftests: fib rule: Make 'getmatch' and 'match' local variables
Let's restrict the scope of these variables to avoid possible
interferences.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 1 Feb 2022 12:53:18 +0000 (12:53 +0000)]
Merge branch '10GbE' of git://git./linux/kernel/git/tnguy/next
-queue
Tony Nguyen says:
====================
10GbE Intel Wired LAN Driver Updates 2022-01-31
Alexander Lobakin says:
This is an interpolation of [0] to other Intel Ethernet drivers
(and is (re)based on its code).
The main aim is to keep XDP metadata not only in case with
build_skb(), but also when we do napi_alloc_skb() + memcpy().
All Intel drivers suffers from the same here:
- metadata gets lost on XDP_PASS in legacy-rx;
- excessive headroom allocation on XSK Rx to skbs;
- metadata gets lost on XSK Rx to skbs.
Those get especially actual in XDP Hints upcoming.
I couldn't have addressed the first one for all Intel drivers due to
that they don't reserve any headroom for now in legacy-rx mode even
with XDP enabled. This is hugely wrong, but requires quite a bunch
of work and a separate series. Luckily, ice doesn't suffer from
that.
igc has 1 and 3 already fixed in [0].
[0] https://lore.kernel.org/netdev/
163700856423.565980.
10162564921347693758.stgit@firesoul
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergey Shtylyov [Sat, 29 Jan 2022 18:45:45 +0000 (21:45 +0300)]
sh_eth: kill useless initializers in sh_eth_{suspend|resume}()
sh_eth_{suspend|resume}() initialize their local variable 'ret' to 0 but
this value is never really used, thus we can kill those intializers...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/f09d7c64-4a2b-6973-09a4-10d759ed0df4@omp.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hyeonggon Yoo [Sat, 29 Jan 2022 08:53:36 +0000 (08:53 +0000)]
net: ena: Do not waste napi skb cache
By profiling, discovered that ena device driver allocates skb by
build_skb() and frees by napi_skb_cache_put(). Because the driver
does not use napi skb cache in allocation path, napi skb cache is
periodically filled and flushed. This is waste of napi skb cache.
As ena_alloc_skb() is called only in napi, Use napi_build_skb()
and napi_alloc_skb() when allocating skb.
This patch was tested on aws a1.metal instance.
[ jwiedmann.dev@gmail.com: Use napi_alloc_skb() instead of
netdev_alloc_skb_ip_align() to keep things consistent. ]
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/YfUAkA9BhyOJRT4B@ip-172-31-19-208.ap-northeast-1.compute.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Venkata Sudheer Kumar Bhavaraju [Mon, 31 Jan 2022 00:52:35 +0000 (16:52 -0800)]
qed: use msleep() in qed_mcp_cmd() and add qed_mcp_cmd_nosleep() for udelay.
Change qed_mcp_cmd() to use msleep() (by setting QED_MB_FLAG_CAN_SLEEP
flag) and add new nosleep() version of the api. These api are used to
issue cmds to management fw and the change affects how driver
behaves while waiting for a response/resource.
All sleepable callers of the existing api now use msleep() version. For
non-sleepable callers, the new nosleep() version is explicitly used.
Signed-off-by: Venkata Sudheer Kumar Bhavaraju <vbhavaraju@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220131005235.1647881-1-vbhavaraju@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Lobakin [Wed, 8 Dec 2021 14:07:02 +0000 (15:07 +0100)]
ixgbe: respect metadata on XSK Rx to skb
For now, if the XDP prog returns XDP_PASS on XSK, the metadata
will be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ixgbe_construct_skb().
Fixes:
d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Wed, 8 Dec 2021 14:07:01 +0000 (15:07 +0100)]
ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ixgbe_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes:
d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Wed, 8 Dec 2021 14:07:00 +0000 (15:07 +0100)]
ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly
To not dereference bi->xdp each time in ixgbe_construct_skb_zc(),
pass bi->xdp as an argument instead of bi. We can also call
xsk_buff_free() outside of the function as well as assign bi->xdp
to NULL, which seems to make it closer to its name.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Wed, 8 Dec 2021 14:06:59 +0000 (15:06 +0100)]
igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, igc_construct_skb_zc() currently allocates and reserves
additional `xdp->data_meta - xdp->data_hard_start`, which is about
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only (+ meta) to
__napi_alloc_skb() and don't reserve anything. This will give
enough headroom for stack processing.
Also, net_prefetch() xdp->data_meta and align the copy size to
speed-up memcpy() a little and better match igc_construct_skb().
Fixes:
fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Wed, 8 Dec 2021 14:06:58 +0000 (15:06 +0100)]
ice: respect metadata on XSK Rx to skb
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ice_construct_skb().
Fixes:
2d4238f55697 ("ice: Add support for AF_XDP")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Wed, 8 Dec 2021 14:06:57 +0000 (15:06 +0100)]
ice: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ice_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes:
2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Wed, 8 Dec 2021 14:06:56 +0000 (15:06 +0100)]
ice: respect metadata in legacy-rx/ice_construct_skb()
In "legacy-rx" mode represented by ice_construct_skb(), we can
still use XDP (and XDP metadata), but after XDP_PASS the metadata
will be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
Point net_prefetch() to xdp->data_meta instead of data. This won't
change anything when the meta is not here, but will save some cache
misses otherwise.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Wed, 8 Dec 2021 14:06:55 +0000 (15:06 +0100)]
i40e: respect metadata on XSK Rx to skb
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().
Fixes:
0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Alexander Lobakin [Wed, 8 Dec 2021 14:06:54 +0000 (15:06 +0100)]
i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes:
0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
David S. Miller [Mon, 31 Jan 2022 15:39:59 +0000 (15:39 +0000)]
Merge branch 'mana-XDP-counters'
Haiyang Zhang says:
====================
net: mana: Add XDP counters, reuse dropped pages
Add drop, tx counters for XDP.
Reuse dropped pages
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Sat, 29 Jan 2022 02:03:38 +0000 (18:03 -0800)]
net: mana: Reuse XDP dropped page
Reuse the dropped page in RX path to save page allocation
overhead.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Sat, 29 Jan 2022 02:03:37 +0000 (18:03 -0800)]
net: mana: Add counter for XDP_TX
This counter will show up in ethtool stat. It is the
number of packets received and forwarded by XDP program.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Sat, 29 Jan 2022 02:03:36 +0000 (18:03 -0800)]
net: mana: Add counter for packet dropped by XDP
This counter will show up in ethtool stat data.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 31 Jan 2022 15:08:20 +0000 (15:08 +0000)]
Merge branch 'smc-improvements'
Tony Lu says:
====================
net/smc: Improvements for TCP_CORK and sendfile()
Currently, SMC use default implement for syscall sendfile() [1], which
is wildly used in nginx and big data sences. Usually, applications use
sendfile() with TCP_CORK:
fstat(20, {st_mode=S_IFREG|0644, st_size=4096, ...}) = 0
setsockopt(19, SOL_TCP, TCP_CORK, [1], 4) = 0
writev(19, [{iov_base="HTTP/1.1 200 OK\r\nServer: nginx/1"..., iov_len=240}], 1) = 240
sendfile(19, 20, [0] => [4096], 4096) = 4096
close(20) = 0
setsockopt(19, SOL_TCP, TCP_CORK, [0], 4) = 0
The above is an example of Nginx, when sendfile() on, Nginx first
enables TCP_CORK, write headers, the data will not be sent. Then call
sendfile(), it reads file and write to sndbuf. When TCP_CORK is cleared,
all pending data is sent out.
The performance of the default implement of sendfile is lower than when
it is off. After investigation, it shows two parts to improve:
- unnecessary lock contention of delayed work
- less data per send than when sendfile off
Patch #1 tries to reduce lock_sock() contention in smc_tx_work().
Patch #2 removes timed work for corking, and let applications control
it. See TCP_CORK [2] MSG_MORE [3].
Patch #3 adds MSG_SENDPAGE_NOTLAST for corking more data when
sendfile().
Test environments:
- CPU Intel Xeon Platinum 8 core, mem 32 GiB, nic Mellanox CX4
- socket sndbuf / rcvbuf: 16384 / 131072 bytes
- server: smc_run nginx
- client: smc_run ./wrk -c 100 -t 2 -d 30 http://192.168.100.1:8080/4k.html
- payload: 4KB local disk file
Items QPS
sendfile off 272477.10
sendfile on (orig) 223622.79
sendfile on (this) 395847.21
This benchmark shows +45.28% improvement compared with sendfile off, and
+77.02% compared with original sendfile implement.
[1] https://man7.org/linux/man-pages/man2/sendfile.2.html
[2] https://linux.die.net/man/7/tcp
[3] https://man7.org/linux/man-pages/man2/send.2.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lu [Sun, 30 Jan 2022 18:02:57 +0000 (02:02 +0800)]
net/smc: Cork when sendpage with MSG_SENDPAGE_NOTLAST flag
This introduces a new corked flag, MSG_SENDPAGE_NOTLAST, which is
involved in syscall sendfile() [1], it indicates this is not the last
page. So we can cork the data until the page is not specify this flag.
It has the same effect as MSG_MORE, but existed in sendfile() only.
This patch adds a option MSG_SENDPAGE_NOTLAST for corking data, try to
cork more data before sending when using sendfile(), which acts like
TCP's behaviour. Also, this reimplements the default sendpage to inform
that it is supported to some extent.
[1] https://man7.org/linux/man-pages/man2/sendfile.2.html
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lu [Sun, 30 Jan 2022 18:02:56 +0000 (02:02 +0800)]
net/smc: Remove corked dealyed work
Based on the manual of TCP_CORK [1] and MSG_MORE [2], these two options
have the same effect. Applications can set these options and informs the
kernel to pend the data, and send them out only when the socket or
syscall does not specify this flag. In other words, there's no need to
send data out by a delayed work, which will queue a lot of work.
This removes corked delayed work with SMC_TX_CORK_DELAY (250ms), and the
applications control how/when to send them out. It improves the
performance for sendfile and throughput, and remove unnecessary race of
lock_sock(). This also unlocks the limitation of sndbuf, and try to fill
it up before sending.
[1] https://linux.die.net/man/7/tcp
[2] https://man7.org/linux/man-pages/man2/send.2.html
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lu [Sun, 30 Jan 2022 18:02:55 +0000 (02:02 +0800)]
net/smc: Send directly when TCP_CORK is cleared
According to the man page of TCP_CORK [1], if set, don't send out
partial frames. All queued partial frames are sent when option is
cleared again.
When applications call setsockopt to disable TCP_CORK, this call is
protected by lock_sock(), and tries to mod_delayed_work() to 0, in order
to send pending data right now. However, the delayed work smc_tx_work is
also protected by lock_sock(). There introduces lock contention for
sending data.
To fix it, send pending data directly which acts like TCP, without
lock_sock() protected in the context of setsockopt (already lock_sock()ed),
and cancel unnecessary dealyed work, which is protected by lock.
[1] https://linux.die.net/man/7/tcp
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 31 Jan 2022 15:05:25 +0000 (15:05 +0000)]
Merge branch 'hash-rethink'
Akhmat Karakotov says:
====================
Make hash rethink configurable
As it was shown in the report by Alexander Azimov, hash rethink at the
client-side may lead to connection timeout toward stateful anycast
services. Tom Herbert created a patchset to address this issue by applying
hash rethink only after a negative routing event (3RTOs) [1]. This change
also affects server-side behavior, which we found undesirable. This
patchset changes defaults in a way to make them safe: hash rethink at the
client-side is disabled and enabled at the server-side upon each RTO
event or in case of duplicate acknowledgments.
This patchset provides two options to change default behaviour. The hash
rethink may be disabled at the server-side by the new sysctl option.
Changes in the sysctl option don't affect default behavior at the
client-side.
Hash rethink can also be enabled/disabled with socket option or bpf
syscalls which ovewrite both default and sysctl settings. This socket
option is available on both client and server-side. This should provide
mechanics to enable hash rethink inside administrative domain, such as DC,
where hash rethink at the client-side can be desirable.
[1] https://lore.kernel.org/netdev/
20210809185314.38187-1-tom@herbertland.com/
v2:
- Changed sysctl default to ENABLED in all patches. Reduced sysctl
and socket option size to u8. Fixed netns bug reported by kernel
test robot.
v3:
- Fixed bug with bad u8 comparison. Moved sk_txrehash to use less
bytes in struct. Added WRITE_ONCE() in setsockopt in and
READ_ONCE() in tcp_rtx_synack.
v4:
- Rebase and add documentation for sysctl option.
v5:
- Move sk_txrehash out of busy poll ifdef.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:25 +0000 (16:31 +0300)]
tcp: Change SYN ACK retransmit behaviour to account for rehash
Disabling rehash behavior did not affect SYN ACK retransmits because hash
was forcefully changed bypassing the sk_rethink_hash function. This patch
adds a condition which checks for rehash mode before resetting hash.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:24 +0000 (16:31 +0300)]
bpf: Add SO_TXREHASH setsockopt
Add bpf socket option to override rehash behaviour from userspace or from bpf.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:23 +0000 (16:31 +0300)]
txhash: Add txrehash sysctl description
Update Documentation/admin-guide/sysctl/net.rst with txrehash usage
description.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:22 +0000 (16:31 +0300)]
txhash: Add socket option to control TX hash rethink behavior
Add the SO_TXREHASH socket option to control hash rethink behavior per socket.
When default mode is set, sockets disable rehash at initialization and use
sysctl option when entering listen state. setsockopt() overrides default
behavior.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:21 +0000 (16:31 +0300)]
txhash: Make rethinking txhash behavior configurable via sysctl
Add a per ns sysctl that controls the txhash rethink behavior:
net.core.txrehash. When enabled, the same behavior is retained,
when disabled, rethink is not performed. Sysctl is enabled by default.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerhard Engleder [Sun, 30 Jan 2022 09:54:22 +0000 (10:54 +0100)]
selftests/net: timestamping: Fix bind_phc check
timestamping checks socket options during initialisation. For the field
bind_phc of the socket option SO_TIMESTAMPING it expects the value -1 if
PHC is not bound. Actually the value of bind_phc is 0 if PHC is not
bound. This results in the following output:
SIOCSHWTSTAMP: tx_type 0 requested, got 0; rx_filter 0 requested, got 0
SO_TIMESTAMP 0
SO_TIMESTAMPNS 0
SO_TIMESTAMPING flags 0, bind phc 0
not expected, flags 0, bind phc -1
This is fixed by setting default value and expected value of bind_phc to
0.
Fixes:
2214d7032479 ("selftests/net: timestamping: support binding PHC")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>