sparc64/mm: set fields in deferred pages

[ Upstream commit 2a20aa171071a334d80c4e5d5af719d8374702fc ]

Without deferred struct page feature (CONFIG_DEFERRED_STRUCT_PAGE_INIT),
flags and other fields in "struct page"es are never changed prior to
first initializing struct pages by going through __init_single_page().

With deferred struct page feature enabled there is a case where we set
some fields prior to initializing:

mem_init() {
     register_page_bootmem_info();
     free_all_bootmem();
     ...
}

When register_page_bootmem_info() is called only non-deferred struct
pages are initialized.  But, this function goes through some reserved
pages which might be part of the deferred, and thus are not yet
initialized.

mem_init
register_page_bootmem_info
register_page_bootmem_info_node
 get_page_bootmem
  .. setting fields here ..
  such as: page->freelist = (void *)type;

free_all_bootmem()
free_low_memory_core_early()
 for_each_reserved_mem_region()
  reserve_bootmem_region()
   init_reserved_page() <- Only if this is deferred reserved page
    __init_single_pfn()
     __init_single_page()
      memset(0) <-- Loose the set fields here

We end up with similar issue as in the previous patch, where currently
we do not observe problem as memory is zeroed.  But, if flag asserts are
changed we can start hitting issues.

Also, because in this patch series we will stop zeroing struct page
memory during allocation, we must make sure that struct pages are
properly initialized prior to using them.

The deferred-reserved pages are initialized in free_all_bootmem().
Therefore, the fix is to switch the above calls.

Link: http://lkml.kernel.org/r/20171013173214.27300-4-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: wake up all tasks blocked in get_request()

[ Upstream commit 34d9715ac1edd50285168dd8d80c972739a4f6a4 ]

Once blk_set_queue_dying() is done in blk_cleanup_queue(), we call
blk_freeze_queue() and wait for q->q_usage_counter becoming zero. But
if there are tasks blocked in get_request(), q->q_usage_counter can
never become zero. So we have to wake up all these tasks in
blk_set_queue_dying() first.

Fixes: 3ef28e83ab157997 ("block: generic request_queue reference counting")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc: Fix rpc_task_begin trace point

[ Upstream commit b2bfe5915d5fe7577221031a39ac722a0a2a1199 ]

The rpc_task_begin trace point always display a task ID of zero.
Move the trace point call site so that it picks up the new task ID.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Fix a typo in nfs_rename()

[ Upstream commit d803224c84be067754db7fa58a93f36f61566493 ]

On successful rename, the "old_dentry" is retained and is attached to
the "new_dir", so we need to call nfs_set_verifier() accordingly.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0

[ Upstream commit 1f3c790bd5989fcfec9e53ad8fa09f5b740c958f ]

line-range is supposed to treat "1-" as "1-endoffile", so
handle the special case by setting last_lineno to UINT_MAX.

Fixes this error:

  dynamic_debug:ddebug_parse_query: last-line:0 < 1st-line:1
  dynamic_debug:ddebug_exec_query: query parse failed

Link: http://lkml.kernel.org/r/10a6a101-e2be-209f-1f41-54637824788e@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/genalloc.c: make the avail variable an atomic_long_t

[ Upstream commit 36a3d1dd4e16bcd0d2ddfb4a2ec7092f0ae0d931 ]

If the amount of resources allocated to a gen_pool exceeds 2^32 then the
avail atomic overflows and this causes problems when clients try and
borrow resources from the pool.  This is only expected to be an issue on
64 bit systems.

Add the <linux/atomic.h> header to pull in atomic_long* operations.  So
that 32 bit systems continue to use atomic32_t but 64 bit systems can
use atomic64_t.

Link: http://lkml.kernel.org/r/1509033843-25667-1-git-send-email-sbates@raithlin.com
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Daniel Mentz <danielmentz@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

route: update fnhe_expires for redirect when the fnhe exists

[ Upstream commit e39d5246111399dbc6e11cd39fd8580191b86c47 ]

Now when creating fnhe for redirect, it sets fnhe_expires for this
new route cache. But when updating the exist one, it doesn't do it.
It will cause this fnhe never to be expired.

Paolo already noticed it before, in Jianlin's test case, it became
even worse:

When ip route flush cache, the old fnhe is not to be removed, but
only clean it's members. When redirect comes again, this fnhe will
be found and updated, but never be expired due to fnhe_expires not
being set.

So fix it by simply updating fnhe_expires even it's for redirect.

Fixes: aee06da6726d ("ipv4: use seqlock for nh_exceptions")
Reported-by: Jianlin Shi <jishi@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

route: also update fnhe_genid when updating a route cache

[ Upstream commit cebe84c6190d741045a322f5343f717139993c08 ]

Now when ip route flush cache and it turn out all fnhe_genid != genid.
If a redirect/pmtu icmp packet comes and the old fnhe is found and all
it's members but fnhe_genid will be updated.

Then next time when it looks up route and tries to rebind this fnhe to
the new dst, the fnhe will be flushed due to fnhe_genid != genid. It
causes this redirect/pmtu icmp packet acutally not to be applied.

This patch is to also reset fnhe_genid when updating a route cache.

Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()

[ Upstream commit 67bd52386125ce1159c0581cbcd2740addf33cd4 ]

hwsim_new_radio_nl() now copies the name attribute in order to add a
null-terminator.  mac80211_hwsim_new_radio() (indirectly) copies it
again into the net_device structure, so the first copy is not used or
freed later.  Free the first copy before returning.

Fixes: ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: pkg: use --transform option to prefix paths in tar

[ Upstream commit 2dbc644ac62bbcb9ee78e84719953f611be0413d ]

For rpm-pkg and deb-pkg, a source tar file is created.  All paths in
the archive must be prefixed with the base name of the tar so that
everything is contained in the directory when you extract it.

Currently, scripts/package/Makefile uses a symlink for that, and
removes it after the tar is created.

If you terminate the build during the tar creation, the symlink is
left over.  Then, at the next package build, you will see a warning
like follows:

  ln: '.' and 'kernel-4.14.0+/.' are the same file

It is possible to fix it by adding -n (--no-dereference) option to
the "ln" command, but a cleaner way is to use --transform option
of "tar" command.  This option is GNU extension, but it should not
hurt to use it in the Linux build system.

The 'S' flag is needed to exclude symlinks from the path fixup.
Without it, symlinks in the kernel are broken.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, i5000, i5400: Fix definition of NRECMEMB register

[ Upstream commit a8c8261425649da58bdf08221570e5335ad33a31 ]

In the i5000 and i5400 drivers, the NRECMEMB register is defined as a
16-bit value, which results in wrong shifts in the code, as reported by
sparse.

In the datasheets ([1], section 3.9.22.20 and [2], section 3.9.22.21),
this register is a 32-bit register. A u32 value for the register fixes
the wrong shifts warnings and matches the datasheet.

Also fix the mask to access to the CAS bits [27:16] in the i5000 driver.

[1]: https://www.intel.com/content/dam/doc/datasheet/5000p-5000v-5000z-chipset-memory-controller-hub-datasheet.pdf
[2]: https://www.intel.se/content/dam/doc/datasheet/5400-chipset-memory-controller-hub-datasheet.pdf

Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170629005729.8478-1-jeremy.lefaure@lse.epita.fr
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro

[ Upstream commit e61555c29c28a4a3b6ba6207f4a0883ee236004d ]

The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used
as if it returned a boolean true if the width if 8. Fix the tests where
MTR_DRAM_WIDTH is misused.

Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170309011809.8340-1-jeremy.lefaure@lse.epita.fr
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested

[ Upstream commit 7aafac11e308d37ed3c509829bb43d80c1811ac3 ]

The IODA2 specification says that a 64 DMA address cannot use top 4 bits
(3 are reserved and one is a "TVE select"); bottom page_shift bits
cannot be used for multilevel table addressing either.

The existing IODA2 table allocation code aligns the minimum TCE table
size to PAGE_SIZE so in the case of 64K system pages and 4K IOMMU pages,
we have 64-4-12=48 bits. Since 64K page stores 8192 TCEs, i.e. needs
13 bits, the maximum number of levels is 48/13 = 3 so we physically
cannot address more and EEH happens on DMA accesses.

This adds a check that too many levels were requested.

It is still possible to have 5 levels in the case of 4K system page size.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/amdgpu: fix console deadlock if late init failed

[ Upstream commit c085bd5119d5d0bdf3ef591a5563566be7dedced ]

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

axonram: Fix gendisk handling

[ Upstream commit 672a2c87c83649fb0167202342ce85af9a3b4f1c ]

It is invalid to call del_gendisk() when disk->queue is NULL. Fix error
handling in axon_ram_probe() to avoid doing that.

Also del_gendisk() does not drop a reference to gendisk allocated by
alloc_disk(). That has to be done by put_disk(). Add that call where
needed.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: don't track fragmented packets

[ Upstream commit 7b4fdf77a450ec0fdcb2f677b080ddbf2c186544 ]

Andrey reports syzkaller splat caused by

NF_CT_ASSERT(!ip_is_fragment(ip_hdr(skb)));

in ipv4 nat.  But this assertion (and the comment) are wrong, this function
does see fragments when IP_NODEFRAG setsockopt is used.

As conntrack doesn't track packets without complete l4 header, only the
first fragment is tracked.

Because applying nat to first packet but not the rest makes no sense this
also turns off tracking of all fragments.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zram: set physical queue limits to avoid array out of bounds accesses

[ Upstream commit 0bc315381fe9ed9fb91db8b0e82171b645ac008f ]

zram can handle at most SECTORS_PER_PAGE sectors in a bio's bvec. When using
the NVMe over Fabrics loopback target which potentially sends a huge bulk of
pages attached to the bio's bvec this results in a kernel panic because of
array out of bounds accesses in zram_decompress_page().

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: riic: fix restart condition

[ Upstream commit 2501c1bb054290679baad0ff7f4f07c714251f4c ]

While modifying the driver to use the STOP interrupt, the completion of the
intermediate transfers need to wake the driver back up in order to initiate
the next transfer (restart condition). Otherwise you get never ending
interrupts and only the first transfer sent.

Fixes: 71ccea095ea1 ("i2c: riic: correctly finish transfers")
Reported-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: s5p-sss - Fix completing crypto request in IRQ handler

[ Upstream commit 07de4bc88ce6a4d898cad9aa4c99c1df7e87702d ]

In a regular interrupt handler driver was finishing the crypt/decrypt
request by calling complete on crypto request.  This is disallowed since
converting to skcipher in commit b286d8b1a690 ("crypto: skcipher - Add
skcipher walk interface") and causes a warning:
WARNING: CPU: 0 PID: 0 at crypto/skcipher.c:430 skcipher_walk_first+0x13c/0x14c

The interrupt is marked shared but in fact there are no other users
sharing it.  Thus the simplest solution seems to be to just use a
threaded interrupt handler, after converting it to oneshot.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: reorder icmpv6_init() and ip6_mr_init()

[ Upstream commit 15e668070a64bb97f102ad9cf3bccbca0545cda8 ]

Andrey reported the following kernel crash:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 14446 Comm: syz-executor6 Not tainted 4.10.0+ #82
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88001f311700 task.stack: ffff88001f6e8000
RIP: 0010:ip6mr_sk_done+0x15a/0x3d0 net/ipv6/ip6mr.c:1618
RSP: 0018:ffff88001f6ef418 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 1ffff10003edde8c RCX: ffffc900043ee000
RDX: 0000000000000004 RSI: ffffffff83e3b3f8 RDI: 0000000000000020
RBP: ffff88001f6ef508 R08: fffffbfff0dcc5d8 R09: 0000000000000000
R10: ffffffff86e62ec0 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88001f6ef4e0 R15: ffff8800380a0040
FS:  00007f7a52cec700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000061c500 CR3: 000000001f1ae000 CR4: 00000000000006f0
DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
 rawv6_close+0x4c/0x80 net/ipv6/raw.c:1217
 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432
 sock_release+0x8d/0x1e0 net/socket.c:597
 __sock_create+0x39d/0x880 net/socket.c:1226
 sock_create_kern+0x3f/0x50 net/socket.c:1243
 inet_ctl_sock_create+0xbb/0x280 net/ipv4/af_inet.c:1526
 icmpv6_sk_init+0x163/0x500 net/ipv6/icmp.c:954
 ops_init+0x10a/0x550 net/core/net_namespace.c:115
 setup_net+0x261/0x660 net/core/net_namespace.c:291
 copy_net_ns+0x27e/0x540 net/core/net_namespace.c:396
9pnet_virtio: no channels available for device ./file1
 create_new_namespaces+0x437/0x9b0 kernel/nsproxy.c:106
 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
 SYSC_unshare kernel/fork.c:2281 [inline]
 SyS_unshare+0x64e/0x1000 kernel/fork.c:2231
 entry_SYSCALL_64_fastpath+0x1f/0xc2

This is because net->ipv6.mr6_tables is not initialized at that point,
ip6mr_rules_init() is not called yet, therefore on the error path when
we iterator the list, we trigger this oops. Fix this by reordering
ip6mr_rules_init() before icmpv6_sk_init().

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: do not rollback VF MAC/VLAN filters we did not configure

[ Upstream commit 78d5505432436516456c12abbe705ec8dee7ee2b ]

On failure to configure a VF MAC/VLAN filter we should not attempt to
rollback filters that we failed to configure with -EEXIST.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: fix possible overrun of VFPF multicast addresses array

[ Upstream commit 22118d861cec5da6ed525aaf12a3de9bfeffc58f ]

It is too late to check for the limit of the number of VF multicast
addresses after they have already been copied to the req->multicast[]
array, possibly overflowing it.

Do the check before copying.

Also fix the error path to not skip unlocking vf2pf_mutex.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: prevent crash when accessing PTP with interface down

[ Upstream commit 466e8bf10ac104d96e1ea813e8126e11cb72ea20 ]

It is possible to crash the kernel by accessing a PTP device while its
associated bnx2x interface is down. Before the interface is brought up,
the timecounter is not initialized, so accessing it results in NULL
dereference.

Fix it by checking if the interface is up.

Use -ENETDOWN as the error code when the interface is down.
 -EFAULT in bnx2x_ptp_adjfreq() did not seem right.

Tested using phc_ctl get/set/adj/freq commands.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi_ks8995: fix "BUG: key accdaa28 not in .data!"

[ Upstream commit 4342696df764ec65dcdfbd0c10d90ea52505f8ba ]

Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: KVM: Survive unknown traps from guests

[ Upstream commit ba4dd156eabdca93501d92a980ba27fa5f4bbd27 ]

Currently we BUG() if we see an ESR_EL2.EC value we don't recognise. As
configurable disables/enables are added to the architecture (controlled
by RES1/RES0 bits respectively), with associated synchronous exceptions,
it may be possible for a guest to trigger exceptions with classes that
we don't recognise.

While we can't service these exceptions in a manner useful to the guest,
we can avoid bringing down the host. Per ARM DDI 0487A.k_iss10775, page
D7-1937, EC values within the range 0x00 - 0x2c are reserved for future
use with synchronous exceptions, and EC values within the range 0x2d -
0x3f may be used for either synchronous or asynchronous exceptions.

The patch makes KVM handle any unknown EC by injecting an UNDEFINED
exception into the guest, with a corresponding (ratelimited) warning in
the host dmesg. We could later improve on this with with a new (opt-in)
exit to the host userspace.

Cc: Dave Martin <dave.martin@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: KVM: Survive unknown traps from guests

[ Upstream commit f050fe7a9164945dd1c28be05bf00e8cfb082ccf ]

Currently we BUG() if we see a HSR.EC value we don't recognise. As
configurable disables/enables are added to the architecture (controlled
by RES1/RES0 bits respectively), with associated synchronous exceptions,
it may be possible for a guest to trigger exceptions with classes that
we don't recognise.

While we can't service these exceptions in a manner useful to the guest,
we can avoid bringing down the host. Per ARM DDI 0406C.c, all currently
unallocated HSR EC encodings are reserved, and per ARM DDI
0487A.k_iss10775, page G6-4395, EC values within the range 0x00 - 0x2c
are reserved for future use with synchronous exceptions, and EC values
within the range 0x2d - 0x3f may be used for either synchronous or
asynchronous exceptions.

The patch makes KVM handle any unknown EC by injecting an UNDEFINED
exception into the guest, with a corresponding (ratelimited) warning in
the host dmesg. We could later improve on this with with a new (opt-in)
exit to the host userspace.

Cc: Dave Martin <dave.martin@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset

[ Upstream commit 2f707d97982286b307ef2a9b034e19aabc1abb56 ]

Reported by syzkaller:

    WARNING: CPU: 1 PID: 27742 at arch/x86/kvm/vmx.c:11029
    nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029
    CPU: 1 PID: 27742 Comm: a.out Not tainted 4.10.0+ #229
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     __dump_stack lib/dump_stack.c:15 [inline]
     dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
     panic+0x1fb/0x412 kernel/panic.c:179
     __warn+0x1c4/0x1e0 kernel/panic.c:540
     warn_slowpath_null+0x2c/0x40 kernel/panic.c:583
     nested_vmx_vmexit+0x5c35/0x74d0 arch/x86/kvm/vmx.c:11029
     vmx_leave_nested arch/x86/kvm/vmx.c:11136 [inline]
     vmx_set_msr+0x1565/0x1910 arch/x86/kvm/vmx.c:3324
     kvm_set_msr+0xd4/0x170 arch/x86/kvm/x86.c:1099
     do_set_msr+0x11e/0x190 arch/x86/kvm/x86.c:1128
     __msr_io arch/x86/kvm/x86.c:2577 [inline]
     msr_io+0x24b/0x450 arch/x86/kvm/x86.c:2614
     kvm_arch_vcpu_ioctl+0x35b/0x46a0 arch/x86/kvm/x86.c:3497
     kvm_vcpu_ioctl+0x232/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2721
     vfs_ioctl fs/ioctl.c:43 [inline]
     do_vfs_ioctl+0x1bf/0x1790 fs/ioctl.c:683
     SYSC_ioctl fs/ioctl.c:698 [inline]
     SyS_ioctl+0x8f/0xc0 fs/ioctl.c:689
     entry_SYSCALL_64_fastpath+0x1f/0xc2

The syzkaller folks reported a nested_run_pending warning during userspace
clear VMX capability which is exposed to L1 before.

The warning gets thrown while doing

(*(uint32_t*)0x20aecfe8 = (uint32_t)0x1);
(*(uint32_t*)0x20aecfec = (uint32_t)0x0);
(*(uint32_t*)0x20aecff0 = (uint32_t)0x3a);
(*(uint32_t*)0x20aecff4 = (uint32_t)0x0);
(*(uint64_t*)0x20aecff8 = (uint64_t)0x0);
r[29] = syscall(__NR_ioctl, r[4], 0x4008ae89ul,
0x20aecfe8ul, 0, 0, 0, 0, 0, 0);

i.e. KVM_SET_MSR ioctl with

struct kvm_msrs {
.nmsrs = 1,
.pad = 0,
.entries = {
{.index = MSR_IA32_FEATURE_CONTROL,
 .reserved = 0,
 .data = 0}
}
}

The VMLANCH/VMRESUME emulation should be stopped since the CPU is going to
reset here. This patch resets the nested_run_pending since the CPU is going
to be reset hence there should be nothing pending.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/crossbar: Fix incorrect type of register size

[ Upstream commit 4b9de5da7e120c7f02395da729f0ec77ce7a6044 ]

The 'size' variable is unsigned according to the dt-bindings.
As this variable is used as integer in other places, create a new variable
that allows to fix the following sparse issue (-Wtypesign):

  drivers/irqchip/irq-crossbar.c:279:52: warning: incorrect type in argument 3 (different signedness)
  drivers/irqchip/irq-crossbar.c:279:52:    expected unsigned int [usertype] *out_value
  drivers/irqchip/irq-crossbar.c:279:52:    got int *<noident>

Signed-off-by: Franck Demathieu <fdemathieu@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters

[ Upstream commit 5d181531bc6169e19a02a27d202cf0e982db9d0e ]

if REG_VPI fails, the driver was incorrectly issuing INIT_VFI
(a SLI4 command) on a SLI3 adapter.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq

[ Upstream commit 637fdbae60d6cb9f6e963c1079d7e0445c86ff7d ]

If queue_delayed_work() gets called with NULL @wq, the kernel will
oops asynchronuosly on timer expiration which isn't too helpful in
tracking down the offender.  This actually happened with smc.

__queue_delayed_work() already does several input sanity checks
synchronously.  Add NULL @wq check.

Reported-by: Dave Jones <davej@codemonkey.org.uk>
Link: http://lkml.kernel.org/r/20170227171439.jshx3qplflyrgcv7@codemonkey.org.uk
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: drop WARN from protocol error in ata_sff_qc_issue()

[ Upstream commit 0580b762a4d6b70817476b90042813f8573283fa ]

ata_sff_qc_issue() expects upper layers to never issue commands on a
command protocol that it doesn't implement.  While the assumption
holds fine with the usual IO path, nothing filters based on the
command protocol in the passthrough path (which was added later),
allowing the warning to be tripped with a passthrough command with the
right (well, wrong) protocol.

Failing with AC_ERR_SYSTEM is the right thing to do anyway.  Remove
the unnecessary WARN.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/CACT4Y+bXkvevNZU8uP6X0QVqsj6wNoUA_1exfTSOzc+SmUtMOA@mail.gmail.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: nVMX: VMCLEAR should not cause the vCPU to shut down

[ Upstream commit 587d7e72aedca91cee80c0a56811649c3efab765 ]

VMCLEAR should silently ignore a failure to clear the launch state of
the VMCS referenced by the operand.

Signed-off-by: Jim Mattson <jmattson@google.com>
[Changed "kvm_write_guest(vcpu->kvm" to "kvm_vcpu_write_guest(vcpu".]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadgetfs: Fix a potential memory leak in 'dev_config()'

[ Upstream commit b6e7aeeaf235901c42ec35de4633c7c69501d303 ]

'kbuf' is allocated just a few lines above using 'memdup_user()'.
If the 'if (dev->buf)' test fails, this memory is never released.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: configs: plug memory leak

[ Upstream commit 38355b2a44776c25b0f2ad466e8c51bb805b3032 ]

When binding a gadget to a device, "name" is stored in gi->udc_name, but
this does not happen when unregistering and the string is leaked.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: chicony: Add support for another ASUS Zen AiO keyboard

[ Upstream commit f2f10b7e722a75c6d75a7f7cd06b0eee3ae20f7c ]

Add support for media keys on the keyboard that comes with the
Asus V221ID and ZN241IC All In One computers.

The keys to support here are WLAN, BRIGHTNESSDOWN and BRIGHTNESSUP.

This device is not visibly branded as Chicony, and the USB Vendor ID
suggests that it is a JESS device. However this seems like the right place
to put it: the usage codes are identical to the currently supported
devices, and this driver already supports the ASUS AIO keyboard AK1D.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: altera: Use handle_level_irq when configured as a level_high

[ Upstream commit f759921cfbf4847319d197a6ed7c9534d593f8bc ]

When a threaded irq handler is chained attached to one of the gpio
pins when configure for level irq the altera_gpio_irq_leveL_high_handler
does not mask the interrupt while being handled by the chained irq.
This resulting in the threaded irq not getting enough cycles to complete
quickly enough before the irq was disabled as faulty. handle_level_irq
should be used in this situation instead of handle_simple_irq.

In gpiochip_irqchip_add set default handler to handle_bad_irq as
per Documentation/gpio/driver.txt. Then set the correct handler in
the set_type callback.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Release device node after it is no longer needed.

[ Upstream commit b92675d998a9fa37fe9e0e35053a95b4a23c158b ]

The device node returned by of_find_node_by_name() needs to be released
after it is no longer needed to avoid a device node leak.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Fix device node reference counts

[ Upstream commit 10e5778f54765c96fe0c8f104b7a030e5b35bc72 ]

After commit 0549bde0fcb1 ("of: fix of_node leak caused in
of_find_node_opts_by_path"), the following error may be
reported when running omap images.

OF: ERROR: Bad of_node_put() on /ocp@68000000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1
Hardware name: Generic OMAP3-GP (Flattened Device Tree)
[<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14)
[<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac)
[<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c)
[<c05af1b0>] (kobject_release)
from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94)
[<c0ad1aa4>] (of_find_node_by_name)
from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c)
[<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from
[<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274)
[<c1215d5c>] (omap3xxx_hwmod_init)
from [<c120faa8>] (omap3_init_early+0xa0/0x11c)
[<c120faa8>] (omap3_init_early)
from [<c120fb2c>] (omap3430_init_early+0x8/0x30)
[<c120fb2c>] (omap3430_init_early)
from [<c1204710>] (setup_arch+0xc04/0xc34)
[<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c)
[<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c)

of_find_node_by_name() drops the reference to the passed device node.
The commit referenced above exposes this problem.

To fix the problem, use of_get_child_by_name() instead of
of_find_node_by_name(); of_get_child_by_name() does not drop
the reference count of passed device nodes. While semantically
different, we only look for immediate children of the passed
device node, so of_get_child_by_name() is a more appropriate
function to use anyway.

Release the reference to the device node obtained with
of_get_child_by_name() after it is no longer needed to avoid
another device node leak.

While at it, clean up the code and change the return type of
omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use
and the return type of of_device_is_available().

Cc: Qi Hou <qi.hou@windriver.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module: set __jump_table alignment to 8

[ Upstream commit ab42632156becd35d3884ee5c14da2bedbf3149a ]

For powerpc the __jump_table section in modules is not aligned, this
causes a WARN_ON() splat when loading a module containing a __jump_table.

Strict alignment became necessary with commit 3821fd35b58d
("jump_label: Reduce the size of struct static_key"), currently in
linux-next, which uses the two least significant bits of pointers to
__jump_table elements.

Fix by forcing __jump_table to 8, which is the same alignment used for
this section in the kernel proper.

Link: http://lkml.kernel.org/r/20170301220453.4756-1-david.daney@cavium.com
Reviewed-by: Jason Baron <jbaron@akamai.com>
Acked-by: Jessica Yu <jeyu@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftest/powerpc: Fix false failures for skipped tests

[ Upstream commit a6d8a21596df041f36f4c2ccc260c459e3e851f1 ]

Tests under alignment subdirectory are skipped when executed on previous
generation hardware, but harness still marks them as failed.

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [FAIL]

The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till
the program exit which causes the test to be marked as failed.

This patch resets the value before returning to the main() routine.
With this patch the test o/p is as follows:

  test: test_copy_unaligned
  tags: git_version:unknown
  [SKIP] Test skipped on line 26
  skip: test_copy_unaligned
  selftests: copy_unaligned [PASS]

Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hpet: Prevent might sleep splat on resume

[ Upstream commit bb1a2c26165640ba2cbcfe06c81e9f9d6db4e643 ]

Sergey reported a might sleep warning triggered from the hpet resume
path. It's caused by the call to disable_irq() from interrupt disabled
context.

The problem with the low level resume code is that it is not accounted as a
special system_state like we do during the boot process. Calling the same
code during system boot would not trigger the warning. That's inconsistent
at best.

In this particular case it's trivial to replace the disable_irq() with
disable_hardirq() because this particular code path is solely used from
system resume and the involved hpet interrupts can never be force threaded.

Reported-and-tested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1703012108460.3684@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure

[ Upstream commit 7807e086a2d1f69cc1a57958cac04fea79fc2112 ]

gpmc_probe_onenand_child returns success even on gpmc_onenand_init
failure. Fix that.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vti6: Don't report path MTU below IPV6_MIN_MTU.

[ Upstream commit e3dc847a5f85b43ee2bfc8eae407a7e383483228 ]

In vti6_xmit(), the check for IPV6_MIN_MTU before we
send a ICMPV6_PKT_TOOBIG message is missing. So we might
report a PMTU below 1280. Fix this by adding the required
check.

Fixes: ccd740cbc6e ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "s390/kbuild: enable modversions for symbols exported from asm"

This reverts commit cabab3f9f5ca077535080b3252e6168935b914af.

Not needed for < 4.9.

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA"

This reverts commit dadab2d4e3cf708ceba22ecddd94aedfecb39199.

Not required on < 4.10.

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/armada: Fix compile fail"

This reverts commit 82f260d472c3b4dbb7324624e395c3e91f73a040.

Not required on < 4.10.

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: drop unused pmdp_huge_get_and_clear_notify()

commit c0c379e2931b05facef538e53bf3b21f283d9a0b upstream.

Dave noticed that after fixing MADV_DONTNEED vs numa balancing race the
last pmdp_huge_get_and_clear_notify() user is gone.

Let's drop the helper.

Link: http://lkml.kernel.org/r/20170306112047.24809-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[jwang: adjust context for 4.4]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thp: fix MADV_DONTNEED vs. numa balancing race

commit ced108037c2aa542b3ed8b7afd1576064ad1362a upstream.

In case prot_numa, we are under down_read(mmap_sem).  It's critical to
not clear pmd intermittently to avoid race with MADV_DONTNEED which is
also under down_read(mmap_sem):

CPU0: CPU1:
change_huge_pmd(prot_numa=1)
 pmdp_huge_get_and_clear_notify()
madvise_dontneed()
 zap_pmd_range()
  pmd_trans_huge(*pmd) == 0 (without ptl)
  // skip the pmd
 set_pmd_at();
 // pmd is re-established

The race makes MADV_DONTNEED miss the huge pmd and don't clear it
which may break userspace.

Found by code analysis, never saw triggered.

Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[jwang: adjust context for 4.4]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thp: reduce indentation level in change_huge_pmd()

commit 0a85e51d37645e9ce57e5e1a30859e07810ed07c upstream.

Patch series "thp: fix few MADV_DONTNEED races"

For MADV_DONTNEED to work properly with huge pages, it's critical to not
clear pmd intermittently unless you hold down_write(mmap_sem).

Otherwise MADV_DONTNEED can miss the THP which can lead to userspace
breakage.

See example of such race in commit message of patch 2/4.

All these races are found by code inspection.  I haven't seen them
triggered.  I don't think it's worth to apply them to stable@.

This patch (of 4):

Restructure code in preparation for a fix.

Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[jwang: adjust context for 4.4 kernel]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: storvsc: Workaround for virtual DVD SCSI version

commit f1c635b439a5c01776fe3a25b1e2dc546ea82e6f upstream.

Hyper-V host emulation of SCSI for virtual DVD device reports SCSI
version 0 (UNKNOWN) but is still capable of supporting REPORTLUN.

Without this patch, a GEN2 Linux guest on Hyper-V will not boot 4.11
successfully with virtual DVD ROM device. What happens is that the SCSI
scan process falls back to doing sequential probing by INQUIRY.  But the
storvsc driver has a previous workaround that masks/blocks all errors
reports from INQUIRY (or MODE_SENSE) commands.  This workaround causes
the scan to then populate a full set of bogus LUN's on the target and
then sends kernel spinning off into a death spiral doing block reads on
the non-existent LUNs.

By setting the correct blacklist flags, the target with the DVD device
is scanned with REPORTLUN and that works correctly.

Patch needs to go in current 4.11, it is safe but not necessary in older
kernels.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: avoid faulting on qemu

commit 3aaf33bebda8d4ffcc0fc8ef39e6c1ac68823b11 upstream.

When qemu starts a kernel in a bare environment, the default SCR has
the AW and FW bits clear, which means that the kernel can't modify
the PSR A or PSR F bits, and means that FIQs and imprecise aborts are
always masked.

When running uboot under qemu, the AW and FW SCR bits are set, and the
kernel functions normally - and this is how real hardware behaves.

Fix this for qemu by ignoring the FIQ bit.

Fixes: 8bafae202c82 ("ARM: BUG if jumping to usermode address in kernel mode")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: BUG if jumping to usermode address in kernel mode

commit 8bafae202c82dc257f649ea3c275a0f35ee15113 upstream.

Detect if we are returning to usermode via the normal kernel exit paths
but the saved PSR value indicates that we are in kernel mode.  This
could occur due to corrupted stack state, which has been observed with
"ftracetest".

This ensures that we catch the problem case before we get to user code.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Shi <alex.shi@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fpsimd: Prevent registers leaking from dead tasks

commit 071b6d4a5d343046f253a5a8835d477d93992002 upstream.

Currently, loading of a task's fpsimd state into the CPU registers
is skipped if that task's state is already present in the registers
of that CPU.

However, the code relies on the struct fpsimd_state * (and by
extension struct task_struct *) to unambiguously identify a task.

There is a particular case in which this doesn't work reliably:
when a task exits, its task_struct may be recycled to describe a
new task.

Consider the following scenario:

 1) Task P loads its fpsimd state onto cpu C.
        per_cpu(fpsimd_last_state, C) := P;
        P->thread.fpsimd_state.cpu := C;

 2) Task X is scheduled onto C and loads its fpsimd state on C.
        per_cpu(fpsimd_last_state, C) := X;
        X->thread.fpsimd_state.cpu := C;

 3) X exits, causing X's task_struct to be freed.

 4) P forks a new child T, which obtains X's recycled task_struct.
T == X.
T->thread.fpsimd_state.cpu == C (inherited from P).

 5) T is scheduled on C.
T's fpsimd state is not loaded, because
per_cpu(fpsimd_last_state, C) == T (== X) &&
T->thread.fpsimd_state.cpu == C.

        (This is the check performed by fpsimd_thread_switch().)

So, T gets X's registers because the last registers loaded onto C
were those of X, in (2).

This patch fixes the problem by ensuring that the sched-in check
fails in (5): fpsimd_flush_task_state(T) is called when T is
forked, so that T->thread.fpsimd_state.cpu == C cannot be true.
This relies on the fact that T is not schedulable until after
copy_thread() completes.

Once T's fpsimd state has been loaded on some CPU C there may still
be other cpus D for which per_cpu(fpsimd_last_state, D) ==
&X->thread.fpsimd_state.  But D is necessarily != C in this case,
and the check in (5) must fail.

An alternative fix would be to do refcounting on task_struct.  This
would result in each CPU holding a reference to the last task whose
fpsimd state was loaded there.  It's not clear whether this is
preferable, and it involves higher overhead than the fix proposed
in this patch.  It would also move all the task_struct freeing
work into the context switch critical section, or otherwise some
deferred cleanup mechanism would need to be introduced, neither of
which seems obviously justified.

Fixes: 005f78cd8849 ("arm64: defer reloading a task's FPSIMD state to userland resume")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: word-smithed the comment so it makes more sense]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: remove I/O port 0x80 bypass on Intel hosts

commit d59d51f088014f25c2562de59b9abff4f42a7468 upstream.

This fixes CVE-2017-1000407.

KVM allows guests to directly access I/O port 0x80 on Intel hosts.  If
the guest floods this port with writes it generates exceptions and
instability in the host kernel, leading to a crash.  With this change
guest writes to port 0x80 on Intel will behave the same as they
currently behave on AMD systems.

Prevent the flooding by removing the code that sets port 0x80 as a
passthrough port.  This is essentially the same as upstream patch
99f85a28a78e96d28907fe036e1671a218fee597, except that patch was
for AMD chipsets and this patch is for Intel.

Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes: fdef3ad1b386 ("KVM: VMX: Enable io bitmaps to avoid IO port 0x80 VMEXITs")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one

commit 26aa7b3b1c0fb3f1a6176a0c1847204ef4355693 upstream.

VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 47-bit addresses (instead of 48-bit) and also
insufficiently checking the alignment. This patch fixes it.

As an example, with 4k pages, before this patch we have:

  PHYS_MASK_SHIFT = 48
  VTTBR_X = 37 - 24 = 13
  VTTBR_BADDR_SHIFT = 13 - 1 = 12
  VTTBR_BADDR_MASK = ((1 << 35) - 1) << 12 = 0x00007ffffffff000

Which is wrong, because the mask doesn't allow bit 47 of the VTTBR
address to be set, and only requires the address to be 12-bit (4k)
aligned, while it actually needs to be 13-bit (8k) aligned because we
concatenate two 4k tables.

With this patch, the mask becomes 0x0000ffffffffe000, which is what we
want.

Fixes: 0369f6a34b9f ("arm64: KVM: EL2 register definitions")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb: i2c transfers over usb cannot be done from stack

commit 6d33377f2abbf9f0e561b116dd468d1c3ff36a6a upstream.

Signed-off-by: Laurent Caumont <lcaumont2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU

commit 120a264f9c2782682027d931d83dcbd22e01da80 upstream.

When no IOMMU is available, all GEM buffers allocated by Exynos DRM driver
are contiguous, because of the underlying dma_alloc_attrs() function
provides only such buffers. In such case it makes no sense to keep
BO_NONCONTIG flag for the allocated GEM buffers. This allows to avoid
failures for buffer contiguity checks in the subsequent operations on GEM
objects.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: extra printk() wrapper macros

commit 30b0da8d556e65ff935a56cd82c05ba0516d3e4a upstream.

We had only DRM_INFO() and DRM_ERROR(), whereas the underlying printk()
provides several other useful intermediate levels such as NOTICE and
WARNING. So this patch fills out the set by providing both regular and
once-only macros for each of the levels INFO, NOTICE, and WARNING, using
a common underlying macro that does all the token-pasting.

DRM_ERROR is unchanged, as it's not just a printk wrapper.

v2:
    Fix whitespace, missing ## (Eric Engestrom)

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: Fix handling of kallsyms_symbol_next() return value

commit c07d35338081d107e57cf37572d8cc931a8e32e2 upstream.

kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.

This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix compat system call table

commit e779498df587dd2189b30fe5b9245aefab870eb8 upstream.

When wiring up the socket system calls the compat entries were
incorrectly set. Not all of them point to the corresponding compat
wrapper functions, which clear the upper 33 bits of user space
pointers, like it is required.

Fixes: 977108f89c989 ("s390: wire up separate socketcalls system calls")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Fix scatterlist offset handling

commit 29a90b70893817e2f2bb3cea40a29f5308e21b21 upstream.

The intel-iommu DMA ops fail to correctly handle scatterlists where
sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed
appropriately based on the page-aligned portion of the offset, but the
mapping is set up relative to sg->page, which means it fails to actually
cover the whole buffer (and in the worst case doesn't cover it at all):

    (sg->dma_address + sg->dma_len) ----+
    sg->dma_address ---------+          |
    iov_pfn------+           |          |
                 |           |          |
                 v           v          v
iova:   a        b        c        d        e        f
        |--------|--------|--------|--------|--------|
                          <...calculated....>
                 [_____mapped______]
pfn:    0        1        2        3        4        5
        |--------|--------|--------|--------|--------|
                 ^           ^          ^
                 |           |          |
    sg->page ----+           |          |
    sg->offset --------------+          |
    (sg->offset + sg->length) ----------+

As a result, the caller ends up overrunning the mapping into whatever
lies beyond, which usually goes badly:

[  429.645492] DMAR: DRHD: handling fault status reg 2
[  429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ...

Whilst this is a fairly rare occurrence, it can happen from the result
of intermediate scatterlist processing such as scatterwalk_ffwd() in the
crypto layer. Whilst that particular site could be fixed up, it still
seems worthwhile to bring intel-iommu in line with other DMA API
implementations in handling this robustly.

To that end, fix the intel_map_sg() path to line up the mapping
correctly (in units of MM pages rather than VT-d pages to match the
aligned_nrpages() calculation) regardless of the offset, and use
sg_phys() consistently for clarity.

Reported-by: Harsh Jain <Harsh@chelsio.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed by: Ashok Raj <ashok.raj@intel.com>
Tested by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add check return value for usb_string()

commit 89b89d121ffcf8d9546633b98ded9d18b8f75891 upstream.

snd_usb_copy_string_desc() returns zero if usb_string() fails.
In case of failure, we need to check the snd_usb_copy_string_desc()'s
return value and add an exception case

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix out-of-bound error

commit 251552a2b0d454badc8f486e6d79100970c744b0 upstream.

The snd_usb_copy_string_desc() retrieves the usb string corresponding to
the index number through the usb_string(). The problem is that the
usb_string() returns the length of the string (>= 0) when successful, but
it can also return a negative value about the error case or status of
usb_control_msg().

If iClockSource is '0' as shown below, usb_string() will returns -EINVAL.
This will result in '0' being inserted into buf[-22], and the following
KASAN out-of-bound error message will be output.

AudioControl Interface Descriptor:
  bLength                 8
  bDescriptorType        36
  bDescriptorSubtype     10 (CLOCK_SOURCE)
  bClockID                1
  bmAttributes         0x07 Internal programmable Clock (synced to SOF)
  bmControls           0x07
  Clock Frequency Control (read/write)
  Clock Validity Control (read-only)
  bAssocTerminal          0
  iClockSource            0

To fix it, check usb_string()'return value and bail out.

==================================================================
BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376

CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3
Hardware name: LG Electronics                   15N540-RFLGL/White Tip Mountain, BIOS 15N5
Call Trace:
dump_stack+0x63/0x8d
print_address_description+0x70/0x290
? parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
kasan_report+0x265/0x350
__asan_store1+0x4a/0x50
parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
? save_stack+0xb5/0xd0
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
? kasan_kmalloc+0xad/0xe0
? kmem_cache_alloc_trace+0xff/0x230
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? usb_probe_interface+0x1f5/0x440
? driver_probe_device+0x3ed/0x660
? build_feature_ctl+0xb10/0xb10 [snd_usb_audio]
? save_stack_trace+0x1b/0x20
? init_object+0x69/0xa0
? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio]
snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio]
? build_audio_procunit+0x890/0x890 [snd_usb_audio]
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? kmem_cache_alloc_trace+0xff/0x230
? usb_ifnum_to_if+0xbd/0xf0
snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio]
? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio]
usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio]
? __pm_runtime_idle+0x90/0x90
? kernfs_activate+0xa6/0xc0
? usb_match_one_id_intf+0xdc/0x130
? __pm_runtime_set_status+0x2d4/0x450
usb_probe_interface+0x1f5/0x440

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Remove spurious WARN_ON() at timer check

commit 43a3542870328601be02fcc9d27b09db467336ef upstream.

The use of snd_BUG_ON() in ALSA sequencer timer may lead to a spurious
WARN_ON() when a slave timer is deployed as its backend and a
corresponding master timer stops meanwhile.  The symptom was triggered
by syzkaller spontaneously.

Since the NULL timer is valid there, rip off snd_BUG_ON().

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: prevent UAF in snd_pcm_info

commit 362bca57f5d78220f8b5907b875961af9436e229 upstream.

When the device descriptor is closed, the `substream->runtime` pointer
is freed. But another thread may be in the ioctl handler, case
SNDRV_CTL_IOCTL_PCM_INFO. This case calls snd_pcm_info_user() which
calls snd_pcm_info() which accesses the now freed `substream->runtime`.

Note: this fixes CVE-2017-0861

Signed-off-by: Robb Glasser <rglasser@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/PCI: Make broadcom_postcore_init() check acpi_disabled

commit ddec3bdee05b06f1dda20ded003c3e10e4184cab upstream.

acpi_os_get_root_pointer() may return a valid address even if acpi_disabled
is set, but the host bridge information from the ACPI tables is not going
to be used in that case and the Broadcom host bridge initialization should
not be skipped then, So make broadcom_postcore_init() check acpi_disabled
too to avoid this issue.

Fixes: 6361d72b04d1 (x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan)
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linux PCI <linux-pci@vger.kernel.org>
Link: https://lkml.kernel.org/r/3186627.pxZj1QbYNg@aspire.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

X.509: reject invalid BIT STRING for subjectPublicKey

commit 0f30cbea005bd3077bd98cd29277d7fc2699c1da upstream.

Adding a specially crafted X.509 certificate whose subjectPublicKey
ASN.1 value is zero-length caused x509_extract_key_data() to set the
public key size to SIZE_MAX, as it subtracted the nonexistent BIT STRING
metadata byte.  Then, x509_cert_parse() called kmemdup() with that bogus
size, triggering the WARN_ON_ONCE() in kmalloc_slab().

This appears to be harmless, but it still must be fixed since WARNs are
never supposed to be user-triggerable.

Fix it by updating x509_cert_parse() to validate that the value has a
BIT STRING metadata byte, and that the byte is 0 which indicates that
the number of bits in the bitstring is a multiple of 8.

It would be nice to handle the metadata byte in asn1_ber_decoder()
instead.  But that would be tricky because in the general case a BIT
STRING could be implicitly tagged, and/or could legitimately have a
length that is not a whole number of bytes.

Here was the WARN (cleaned up slightly):

    WARNING: CPU: 1 PID: 202 at mm/slab_common.c:971 kmalloc_slab+0x5d/0x70 mm/slab_common.c:971
    Modules linked in:
    CPU: 1 PID: 202 Comm: keyctl Tainted: G    B            4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    task: ffff880033014180 task.stack: ffff8800305c8000
    Call Trace:
     __do_kmalloc mm/slab.c:3706 [inline]
     __kmalloc_track_caller+0x22/0x2e0 mm/slab.c:3726
     kmemdup+0x17/0x40 mm/util.c:118
     kmemdup include/linux/string.h:414 [inline]
     x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASN.1: check for error from ASN1_OP_END__ACT actions

commit 81a7be2cd69b412ab6aeacfe5ebf1bb6e5bce955 upstream.

asn1_ber_decoder() was ignoring errors from actions associated with the
opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT,
ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT.  In practice, this
meant the pkcs7_note_signed_info() action (since that was the only user
of those opcodes).  Fix it by checking for the error, just like the
decoder does for actions associated with the other opcodes.

This bug allowed users to leak slab memory by repeatedly trying to add a
specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY).

In theory, this bug could also be used to bypass module signature
verification, by providing a PKCS#7 message that is misparsed such that
a signature's ->authattrs do not contain its ->msgdigest.  But it
doesn't seem practical in normal cases, due to restrictions on the
format of the ->authattrs.

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASN.1: fix out-of-bounds read when parsing indefinite length item

commit e0058f3a874ebb48b25be7ff79bc3b4e59929f90 upstream.

In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed
to the action functions before their lengths had been computed, using
the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH).  This resulted in
reading data past the end of the input buffer, when given a specially
crafted message.

Fix it by rearranging the code so that the indefinite length is resolved
before the action is called.

This bug was originally found by fuzzing the X.509 parser in userspace
using libFuzzer from the LLVM project.

KASAN report (cleaned up slightly):

    BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline]
    BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
    Read of size 128 at addr ffff880035dd9eaf by task keyctl/195

    CPU: 1 PID: 195 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    Call Trace:
     __dump_stack lib/dump_stack.c:17 [inline]
     dump_stack+0xd1/0x175 lib/dump_stack.c:53
     print_address_description+0x78/0x260 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x23f/0x350 mm/kasan/report.c:409
     memcpy+0x1f/0x50 mm/kasan/kasan.c:302
     memcpy ./include/linux/string.h:341 [inline]
     x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
     asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447
     x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89
     x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

    Allocated by task 195:
     __do_kmalloc_node mm/slab.c:3675 [inline]
     __kmalloc_node+0x47/0x60 mm/slab.c:3682
     kvmalloc ./include/linux/mm.h:540 [inline]
     SYSC_add_key security/keys/keyctl.c:104 [inline]
     SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0x96

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: Move some sysfs files to be read-only by root

commit af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.

Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.

So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: align sata_device's rps_resp on a cacheline

commit c2e8fbf908afd81ad502b567a6639598f92c9b9d upstream.

The rps_resp buffer in ata_device is a DMA target, but it isn't
explicitly cacheline aligned. Due to this, adjacent fields can be
overwritten with stale data from memory on non-coherent architectures.
As a result, the kernel is sometimes unable to communicate with an SATA
device behind a SAS expander.

Fix this by ensuring that the rps_resp buffer is cacheline aligned.

This issue is similar to that fixed by Commit 84bda12af31f93 ("libata:
align ap->sector_buf") and Commit 4ee34ea3a12396f35b26 ("libata: Align
ata_device's id on a cacheline").

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isa: Prevent NULL dereference in isa_bus driver callbacks

commit 5a244727f428a06634f22bb890e78024ab0c89f3 upstream.

The isa_driver structure for an isa_bus device is stored in the device
platform_data member of the respective device structure. This
platform_data member may be reset to NULL if isa_driver match callback
for the device fails, indicating a device unsupported by the ISA driver.

This patch fixes a possible NULL pointer dereference if one of the
isa_driver callbacks to attempted for an unsupported device. This error
should not occur in practice since ISA devices are typically manually
configured and loaded by the users, but we may as well prevent this
error from popping up for the 0day testers.

Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus")
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv: kvp: Avoid reading past allocated blocks from KVP file

commit 297d6b6e56c2977fc504c61bbeeaa21296923f89 upstream.

While reading in more than one block (50) of KVP records, the allocation
goes per block, but the reads used the total number of allocated records
(without resetting the pointer/stream). This causes the records buffer to
overrun when the refresh reads more than one block over the previous
capacity (e.g. reading more than 100 KVP records whereas the in-memory
database was empty before).

Fix this by reading the correct number of KVP records from file each time.

Signed-off-by: Paul Meyer <Paul.Meyer@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio: release virtio index when fail to device_register

commit e60ea67bb60459b95a50a156296041a13e0e380e upstream.

index can be reused by other virtio device.

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: usb_8dev: cancel urb on -EPIPE and -EPROTO

commit 12147edc434c9e4c7c2f5fee2e5519b2e5ac34ce upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: esd_usb2: cancel urb on -EPIPE and -EPROTO

commit 7a31ced3de06e9878e4f9c3abe8f87d9344d8144 upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: ems_usb: cancel urb on -EPIPE and -EPROTO

commit bd352e1adfe0d02d3ea7c8e3fb19183dc317e679 upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: cancel urb on -EPIPE and -EPROTO

commit 6aa8d5945502baf4687d80de59b7ac865e9e666b upstream.

In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).

This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: ratelimit errors if incomplete messages are received

commit 8bd13bd522ff7dfa0eb371921aeb417155f7a3be upstream.

Avoid flooding the kernel log with "Formate error", if incomplete message
are received.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()

commit e84f44eb5523401faeb9cc1c97895b68e3cfb78d upstream.

The conditon in the while-loop becomes true when actual_length is less than
2 (MSG_HEADER_LEN). In best case we end up with a former, already
dispatched msg, that got msg->len greater than actual_length. This will
result in a "Format error" error printout.

Problem seen when unplugging a Kvaser USB device connected to a vbox guest.

warning: comparison between signed and unsigned integer expressions
[-Wsign-compare]

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: free buf in error paths

commit 435019b48033138581a6171093b181fc6b4d3d30 upstream.

The allocated buffer was not freed if usb_submit_urb() failed.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: ti_hecc: Fix napi poll return value for repoll

commit f6c23b174c3c96616514827407769cbcfc8005cf upstream.

After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi
repoll is done only when work_done == budget.
So we need to return budget if there are still packets to receive.

Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.105

xen-netfront: avoid crashing on resume after a failure in talk_to_netback()

commit d86b5672b1adb98b4cdd6fbf0224bbfb03db6e2e upstream.

Unavoidable crashes in netfront_resume() and netback_changed() after a
previous fail in talk_to_netback() (e.g. when we fail to read MAC from
xenstore) were discovered. The failure path in talk_to_netback() does
unregister/free for netdev but we don't reset drvdata and we try accessing
it after resume.

Fix the bug by removing the whole xen device completely with
device_unregister(), this guarantees we won't have any calls into netfront
after a failure.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: fix incorrect updating of offset

commit 1d5a31582ef046d3b233f0da1a68ae26519b2f0a upstream.

The variable temp is incorrectly being updated, instead it should
be offset otherwise the loop just reads the same capability value
and loops forever.  Thanks to Alan Stern for pointing out the
correct fix to my original fix.  Fix also cleans up clang warning:

drivers/usb/host/ehci-dbg.c:840:4: warning: Value stored to 'temp'
is never read

Fixes: d49d43174400 ("USB: misc ehci updates")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usbfs: Filter flags passed in from user space

commit 446f666da9f019ce2ffd03800995487e79a91462 upstream.

USBDEVFS_URB_ISO_ASAP must be accepted only for ISO endpoints.
Improve sanity checking.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: devio: Prevent integer overflow in proc_do_submiturb()

commit 57999d1107c1e60c2ca7088f2ac0f819e2f554b3 upstream.

There used to be an integer overflow check in proc_do_submiturb() but
we removed it.  It turns out that it's still required.  The
uurb->buffer_length variable is a signed integer and it's controlled by
the user.  It can lead to an integer overflow when we do:

num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE);

If we strip away the macro then that line looks like this:

num_sgs = (uurb->buffer_length + USB_SG_SIZE - 1) / USB_SG_SIZE;
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
It's the first addition which can overflow.

Fixes: 1129d270cbfb ("USB: Increase usbfs transfer limit")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Increase usbfs transfer limit

commit 1129d270cbfbb7e2b1ec3dede4a13930bdd10e41 upstream.

Promote a variable keeping track of USB transfer memory usage to a
wider data type and allow for higher bandwidth transfers from a large
number of USB devices connected to a single host.

Signed-off-by: Mateusz Berezecki <mateuszb@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Add type-specific length check of BOS descriptors

commit 81cf4a45360f70528f1f64ba018d61cb5767249a upstream.

As most of BOS descriptors are longer in length than their header
'struct usb_dev_cap_header', comparing solely with it is not sufficient
to avoid out-of-bounds access to BOS descriptors.

This patch adds descriptor type specific length check in
usb_get_bos_descriptor() to fix the issue.

Signed-off-by: Masakazu Mokuno <masakazu.mokuno@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ch9: Add size macro for SSP dev cap descriptor

commit 446fa3a95df1e8b78f25e1babc41e46edd200821 upstream.

The SuperspeedPlus Device Capability Descriptor has a variable size
depending on the number of sublink speed attributes.

This patch adds a macro to calculate that size. The macro takes one
argument, the Sublink Speed Attribute Count (SSAC) as reported by the
descriptor in bmAttributes[4:0].

See USB 3.1 9.6.2.5, Table 9-19.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Add USB 3.1 Precision time measurement capability descriptor support

commit faee822c5a7ab99de25cd34fcde3f8d37b6b9923 upstream.

USB 3.1 devices that support precision time measurement have an
additional PTM cabaility descriptor as part of the full BOS descriptor

Look for this descriptor while parsing the BOS descriptor, and store it in
struct usb_hub_bos if it exists.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix panic in xhci_free_virt_devices_depth_first

commit 80e457699a8dbdd70f2d26911e46f538645c55fc upstream.

Check vdev->real_port 0 to avoid panic
[    9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108
[    9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570
[    9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8
[    9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0
[    9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8
[    9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70
[    9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108
[    9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40
[    9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120
[    9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210
[    9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0
[    9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488
[    9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8
[    9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490
[    9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0
[    9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100
[    9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50

The problem can occur if xhci_plat_remove() is called shortly after
xhci_plat_probe(). While xhci_free_virt_devices_depth_first been
called before the device has been setup and get real_port initialized.
The problem occurred on Hikey960 and was reproduced by Guenter Roeck
on Kevin with chromeos-4.4.

Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first")
Cc: Guenter Roeck <groeck@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Fan Ning <fanning4@hisilicon.com>
Signed-off-by: Li Rui <lirui39@hisilicon.com>
Signed-off-by: yangdi <yangdi10@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Cycle HUB power when initialization fails

commit 973593a960ddac0f14f0d8877d2d0abe0afda795 upstream.

Sometimes the USB device gets confused about the state of the initialization and
the connection fails. In particular, the device thinks that it's already set up
and running while the host thinks the device still needs to be configured. To
work around this issue, power-cycle the hub's output to issue a sort of "reset"
to the device. This makes the device restart its state machine and then the
initialization succeeds.

This fixes problems where the kernel reports a list of errors like this:

usb 1-1.3: device not accepting address 19, error -71

The end result is a non-functioning device. After this patch, the sequence
becomes like this:

usb 1-1.3: new high-speed USB device number 18 using ci_hdrc
usb 1-1.3: device not accepting address 18, error -71
usb 1-1.3: new high-speed USB device number 19 using ci_hdrc
usb 1-1.3: device not accepting address 19, error -71
usb 1-1-port3: attempt power cycle
usb 1-1.3: new high-speed USB device number 21 using ci_hdrc
usb-storage 1-1.3:1.2: USB Mass Storage device detected

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ocfs2: should wait dio before inode lock in ocfs2_setattr()"

This reverts commit c4baa4a5870cb02f713def1620052bfca7a82bbb which is
commit 28f5a8a7c033cbf3e32277f4cc9c6afd74f05300 upstream.

It shouldn't be applied to the 4.4-stable tree.

Ben and Alex write:

> Now that ocfs2_setattr() calls this outside of the inode locked region,
> what prevents another task adding a new dio request immediately
> afterward?
>

In the kernel 4.6, firstly, we use the inode_lock() in do_truncate() to
prevent another bio to be issued from this node.
Furthermore, we use the ocfs2_rw_lock() and ocfs2_inode_lock() in ocfs2_setattr()
to guarantee no more bio will be issued from the other nodes in this cluster.

> Also, ocfs2_dio_end_io_write() was introduced in 4.6 and it looks like
> the dio completion path didn't previously take the inode lock.  So it
> doesn't look this fix is needed in 3.18 or 4.4.

Yes, ocfs2_dio_end_io_write() was introduced in 4.6 and the problem this patch
fixes is only exist in the kernel 4.6 and above 4.6.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Alex Chen <alex.chen@huawei.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fec: fix multicast filtering hardware setup

[ Upstream commit 01f8902bcf3ff124d0aeb88a774180ebcec20ace ]

Fix hardware setup of multicast address hash:
- Never clear the hardware hash (to avoid packet loss)
- Construct the hash register values in software and then write once
to hardware

Signed-off-by: Rui Sousa <rui.sousa@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netfront: Improve error handling during initialization

[ Upstream commit e2e004acc7cbe3c531e752a270a74e95cde3ea48 ]

This fixes a crash when running out of grant refs when creating many
queues across many netdevs.

* If creating queues fails (i.e. there are no grant refs available),
call xenbus_dev_fatal() to ensure that the xenbus device is set to the
closed state.
* If no queues are created, don't call xennet_disconnect_backend as
netdev->real_num_tx_queues will not have been set correctly.
* If setup_netfront() fails, ensure that all the queues created are
cleaned up, not just those that have been set up.
* If any queues were set up and an error occurs, call
xennet_destroy_queues() to clean up the napi context.
* If any fatal error occurs, unregister and destroy the netdev to avoid
leaving around a half setup network device.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers

[ Upstream commit 0911d0041c22922228ca52a977d7b0b0159fee4b ]

Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this).  However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.

Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.

Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: correct memory barrier usage in tcp_check_space()

[ Upstream commit 56d806222ace4c3aeae516cd7a855340fb2839d8 ]

sock_reset_flag() maps to __clear_bit() not the atomic version clear_bit().
Thus, we need smp_mb(), smp_mb__after_atomic() is not sufficient.

Fixes: 3c7151275c0c ("tcp: add memory barriers to write space paths")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: pl330: fix double lock

[ Upstream commit 91539eb1fda2d530d3b268eef542c5414e54bf1a ]

The static bug finder EBA (http://www.iagoabal.eu/eba/) reported the
following double-lock bug:

    Double lock:
    1. spin_lock_irqsave(pch->lock, flags) at pl330_free_chan_resources:2236;
    2. call to function `pl330_release_channel' immediately after;
    3. call to function `dma_pl330_rqcb' in line 1753;
    4. spin_lock_irqsave(pch->lock, flags) at dma_pl330_rqcb:1505.

I have fixed it as suggested by Marek Szyprowski.

First, I have replaced `pch->lock' with `pl330->lock' in functions
`pl330_alloc_chan_resources' and `pl330_free_chan_resources'. This avoids
the double-lock by acquiring a different lock than `dma_pl330_rqcb'.

NOTE that, as a result, `pl330_free_chan_resources' executes
`list_splice_tail_init' on `pch->work_list' under lock `pl330->lock',
whereas in the rest of the code `pch->work_list' is protected by
`pch->lock'. I don't know if this may cause race conditions. Similarly
`pch->cyclic' is written by `pl330_alloc_chan_resources' under
`pl330->lock' but read by `pl330_tx_submit' under `pch->lock'.

Second, I have removed locking from `pl330_request_channel' and
`pl330_release_channel' functions. Function `pl330_request_channel' is
only called from `pl330_alloc_chan_resources', so the lock is already
held. Function `pl330_release_channel' is called from
`pl330_free_chan_resources', which already holds the lock, and from
`pl330_del'. Function `pl330_del' is called in an error path of
`pl330_probe' and at the end of `pl330_remove', but I assume that there
cannot be concurrent accesses to the protected data at those points.

Signed-off-by: Iago Abal <mail@iagoabal.eu>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix cleanup at module unload

[ Upstream commit 35e22e49a5d6a741ebe7f2dd280b2052c3003ef7 ]

In tipc_server_stop(), we iterate over the connections with limiting
factor as server's idr_in_use. We ignore the fact that this variable
is decremented in tipc_close_conn(), leading to premature exit.

In this commit, we iterate until the we have no connections left.

Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>