git.osdn.net Git - tomoyo/tomoyo-test1.git/log

net: ena: fix incorrect default RSS key

Bug description:
When running "ethtool -x <if_name>" the key shows up as all zeros.

When we use "ethtool -X <if_name> hfunc toeplitz hkey <some:random:key>" to
set the key and then try to retrieve it using "ethtool -x <if_name>" then
we return the correct key because we return the one we saved.

Bug cause:
We don't fetch the key from the device but instead return the key
that we have saved internally which is by default set to zero upon
allocation.

Fix:
This commit fixes the issue by initializing the key to a random value
using netdev_rss_key_fill().

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: add missing ethtool TX timestamping indication

Current implementation of the driver calls skb_tx_timestamp()to add a
software tx timestamp to the skb, however the software-transmit capability
is not reported in ethtool -T.

This commit updates the ethtool structure to report the software-transmit
capability in ethtool -T using the standard ethtool_op_get_ts_info().
This function reports all software timestamping capabilities (tx and rx),
as well as setting phc_index = -1. phc_index is the index of the PTP
hardware clock device that will be used for hardware timestamps. Since we
don't have such a device in ENA, using the default -1 value is the correct
setting.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Ezequiel Lara Gomez <ezegomez@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix uses of round_jiffies()

>From the documentation of round_jiffies():
"Rounds a time delta in the future (in jiffies) up or down to
(approximately) full seconds. This is useful for timers for which
the exact time they fire does not matter too much, as long as
they fire approximately every X seconds.
By rounding these timers to whole seconds, all such timers will fire
at the same time, rather than at various times spread out. The goal
of this is to have the CPU wake up less, which saves power."

There are 2 parts to this patch:
================================
Part 1:
-------
In our case we need timer_service to be called approximately every
X=1 seconds, and the exact time does not matter, so using round_jiffies()
is the right way to go.

Therefore we add round_jiffies() to the mod_timer() in ena_timer_service().

Part 2:
-------
round_jiffies() is used in check_for_missing_keep_alive() when
getting the jiffies of the expiration of the keep_alive timeout. Here it
is actually a mistake to use round_jiffies() because we want the exact
time when keep_alive should expire and not an approximate rounded time,
which can cause early, false positive, timeouts.

Therefore we remove round_jiffies() in the calculation of
keep_alive_expired() in check_for_missing_keep_alive().

Fixes: 82ef30f13be0 ("net: ena: add hardware hints capability to the driver")
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix potential crash when rxfh key is NULL

When ethtool -X is called without an hkey, ena_com_fill_hash_function()
is called with key=NULL, which is passed to memcpy causing a crash.

This commit fixes this issue by checking key is not NULL.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: fix leak of kernel memory to user space

As nlmsg_put() does not clear the memory that is reserved,
it this the caller responsability to make sure all of this
memory will be written, in order to not reveal prior content.

While we are at it, we can provide the socket cookie even
if clsock is not set.

syzbot reported :

BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in __swab32p include/uapi/linux/swab.h:179 [inline]
BUG: KMSAN: uninit-value in __be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
BUG: KMSAN: uninit-value in get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
BUG: KMSAN: uninit-value in ____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
BUG: KMSAN: uninit-value in bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252
CPU: 1 PID: 5262 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
__arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
__fswab32 include/uapi/linux/swab.h:59 [inline]
__swab32p include/uapi/linux/swab.h:179 [inline]
__be32_to_cpup include/uapi/linux/byteorder/little_endian.h:82 [inline]
get_unaligned_be32 include/linux/unaligned/access_ok.h:30 [inline]
____bpf_skb_load_helper_32 net/core/filter.c:240 [inline]
____bpf_skb_load_helper_32_no_cache net/core/filter.c:255 [inline]
bpf_skb_load_helper_32_no_cache+0x14a/0x390 net/core/filter.c:252

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
kmsan_kmalloc_large+0x73/0xc0 mm/kmsan/kmsan_hooks.c:128
kmalloc_large_node_hook mm/slub.c:1406 [inline]
kmalloc_large_node+0x282/0x2c0 mm/slub.c:3841
__kmalloc_node_track_caller+0x44b/0x1200 mm/slub.c:4368
__kmalloc_reserve net/core/skbuff.c:141 [inline]
__alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209
alloc_skb include/linux/skbuff.h:1049 [inline]
netlink_dump+0x44b/0x1ab0 net/netlink/af_netlink.c:2224
__netlink_dump_start+0xbb2/0xcf0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:233 [inline]
smc_diag_handler_dump+0x2ba/0x300 net/smc/smc_diag.c:242
sock_diag_rcv_msg+0x211/0x610 net/core/sock_diag.c:256
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
kernel_sendmsg+0x433/0x440 net/socket.c:679
sock_no_sendpage+0x235/0x300 net/core/sock.c:2740
kernel_sendpage net/socket.c:3776 [inline]
sock_sendpage+0x1e1/0x2c0 net/socket.c:937
pipe_to_sendpage+0x38c/0x4c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x539/0xed0 fs/splice.c:636
splice_from_pipe fs/splice.c:671 [inline]
generic_splice_sendpage+0x1d5/0x2d0 fs/splice.c:844
do_splice_from fs/splice.c:863 [inline]
do_splice fs/splice.c:1170 [inline]
__do_sys_splice fs/splice.c:1447 [inline]
__se_sys_splice+0x2380/0x3350 fs/splice.c:1427
__x64_sys_splice+0x6e/0x90 fs/splice.c:1427
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

i40e: Fix the conditional for i40e_vc_validate_vqs_bitmaps

Commit d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap
validation") introduced a necessary change for verifying how queue
bitmaps from the iavf driver get validated. Unfortunately, the
conditional was reversed. Fix this.

Fixes: d9d6a9aed3f6 ("i40e: Fix virtchnl_queue_select bitmap validation")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

core: Don't skip generic XDP program execution for cloned SKBs

The current generic XDP handler skips execution of XDP programs entirely if
an SKB is marked as cloned. This leads to some surprising behaviour, as
packets can end up being cloned in various ways, which will make an XDP
program not see all the traffic on an interface.

This was discovered by a simple test case where an XDP program that always
returns XDP_DROP is installed on a veth device. When combining this with
the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending
side, SKBs reliably end up in the cloned state, causing them to be passed
through to the receiving interface instead of being dropped. A minimal
reproducer script for this is included below.

This patch fixed the issue by simply triggering the existing linearisation
code for cloned SKBs instead of skipping the XDP program execution. This
behaviour is in line with the behaviour of the native XDP implementation
for the veth driver, which will reallocate and copy the SKB data if the SKB
is marked as shared.

Reproducer Python script (requires BCC and Scapy):

from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP
from bcc import BPF
import time, sys, subprocess, shlex

SKB_MODE = (1 << 1)
DRV_MODE = (1 << 2)
PYTHON=sys.executable

def client():
    time.sleep(2)
    # Sniffing on the sender causes skb_cloned() to be set
    s = AsyncSniffer()
    s.start()

    for p in range(10):
        sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"),
              verbose=False)
        time.sleep(0.1)

    s.stop()
    return 0

def server(mode):
    prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}")
    func = prog.load_func("dummy_drop", BPF.XDP)
    prog.attach_xdp("a_to_b", func, mode)

    time.sleep(1)

    s = sniff(iface="a_to_b", count=10, timeout=15)
    if len(s):
        print(f"Got {len(s)} packets - should have gotten 0")
        return 1
    else:
        print("Got no packets - as expected")
        return 0

if len(sys.argv) < 2:
    print(f"Usage: {sys.argv[0]} <skb|drv>")
    sys.exit(1)

if sys.argv[1] == "client":
    sys.exit(client())
elif sys.argv[1] == "server":
    mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE
    sys.exit(server(mode))
else:
    try:
        mode = sys.argv[1]
        if mode not in ('skb', 'drv'):
            print(f"Usage: {sys.argv[0]} <skb|drv>")
            sys.exit(1)
        print(f"Running in {mode} mode")

        for cmd in [
                'ip netns add netns_a',
                'ip netns add netns_b',
                'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b',
                # Disable ipv6 to make sure there's no address autoconf traffic
                'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1',
                'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1',
                'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa',
                'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc',
                'ip -n netns_a link set dev a_to_b up',
                'ip -n netns_b link set dev b_to_a up']:
            subprocess.check_call(shlex.split(cmd))

        server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}"))
        client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client"))

        client.wait()
        server.wait()
        sys.exit(server.returncode)

    finally:
        subprocess.run(shlex.split("ip netns delete netns_a"))
        subprocess.run(shlex.split("ip netns delete netns_b"))

Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Reported-by: Stepan Horacek <shoracek@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'dax-fixes-5.6-rc1' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull dax fixes from Dan Williams:
"A fix for an xfstest failure and some and an update that removes an
  fsdax dependency on block devices.

  Summary:

   - Fix RWF_NOWAIT writes to properly return -EAGAIN

   - Clean up an unused helper

   - Update dax_writeback_mapping_range to not need a block_device
     argument"

* tag 'dax-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: pass NOWAIT flag to iomap_apply
  dax: Get rid of fs_dax_get_by_host() helper
  dax: Pass dax_dev instead of bdev to dax_writeback_mapping_range()

Merge tag 'trace-v5.6-rc1' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Various fixes:

   - Fix an uninitialized variable

   - Fix compile bug to bootconfig userspace tool (in tools directory)

   - Suppress some error messages of bootconfig userspace tool

   - Remove unneded CONFIG_LIBXBC from bootconfig

   - Allocate bootconfig xbc_nodes dynamically. To ease complaints about
     taking up static memory at boot up

   - Use of parse_args() to parse bootconfig instead of strstr() usage
     Prevents issues of double quotes containing the interested string

   - Fix missing ring_buffer_nest_end() on synthetic event error path

   - Return zero not -EINVAL on soft disabled synthetic event (soft
     disabling must be the same as hard disabling, which returns zero)

   - Consolidate synthetic event code (remove duplicate code)"

* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Consolidate trace() functions
  tracing: Don't return -EINVAL when tracing soft disabled synth events
  tracing: Add missing nest end to synth_event_trace_start() error case
  tools/bootconfig: Suppress non-error messages
  bootconfig: Allocate xbc_nodes array dynamically
  bootconfig: Use parse_args() to find bootconfig and '--'
  tracing/kprobe: Fix uninitialized variable bug
  bootconfig: Remove unneeded CONFIG_LIBXBC
  tools/bootconfig: Fix wrong __VA_ARGS__ usage

ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system

If the platform triggers a spurious SCI even though the status bit
is not set for any GPE when the system is suspended to idle, it will
be treated as a genuine wakeup, so avoid that by checking if any GPEs
are active at all before returning 'true' from acpi_s2idle_wake().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206413
Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow")
Reported-by: Tsuchiya Yuto <kitakar@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA: Introduce acpi_any_gpe_status_set()

Introduce a new helper function, acpi_any_gpe_status_set(), for
checking the status bits of all enabled GPEs in one go.

It is needed to distinguish spurious SCIs from genuine ones when
deciding whether or not to wake up the system from suspend-to-idle.

Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drm/amdgpu:/navi10: use the ODCAP enum to index the caps array

Rather than the FEATURE_ID flags. Avoids a possible reading past
the end of the array.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.5.x

drm/amdgpu: update smu_v11_0_pptable.h

Update to the latest changes.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.5.x

drm/amdgpu: correct comment to clear up the confusion

Former comment looks to be one intended behavior in code,
actually it's not. So correct it.

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DCN2.x Do not program DPPCLK if same value

[WHY]
Programming DPPCLK to the same value currently set may cause
underflow while playing video in certain conditions.

[HOW]
Only program DPPCLK if clock is not the same as the
previous value programmed.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't map ATOM_ENABLE to ATOM_INIT

[Why]
In DCN hardware sequencer we do actually call ATOM_INIT correctly per
pipe. The workaround is not necessary for command table offloading.

[How]
Drop the workaround since it's not needed.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn2.5: fix warning

Fix warning during switching to dpg pause mode for
VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16

Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: limit GDS clearing workaround in cold boot sequence

GDS clear workaround will cause gfx failure in suspend/resume case.

[   98.679559] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <gfx_v9_0> failed -110
[   98.679561] PM: dpm_run_callback(): pci_pm_resume+0x0/0xa0 returns -110
[   98.679562] PM: Device 0000:03:00.0 failed to resume async: error -110

As this workaround is specific to the HW bug of GDS's ECC error
existing in cold boot up, so bypass this workaround in suspend/
resume case after booting up.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->conf

hwc->conf was designated specifically for AMD APU IOMMU purposes. This
could cause problems in performance and/or function since APU IOMMU
implementation is elsewhere. Also hwc->conf and hwc->config are
different members of an anonymous union so hwc->conf aliases as
hw->last_tag.

Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags

On PowerPC, the compiler will tag object files with whether they
use hard or soft float FP ABI and whether they use 64 or 128-bit
long double ABI. On systems with 64-bit long double ABI, a tag
will get emitted whenever a double is used, as on those systems
a long double is the same as a double. This will prevent linkage
as other files are being compiled with hard-float.

On ppc64, this code will never actually get used for the time
being, as the only currently existing hardware using it are the
Renoir APUs. Therefore, until this is testable and can be fixed
properly, at least make sure the build will not fail.

Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn2.5: fix DPG mode power off issue on instance 1

Support pause_state for multiple instance, and it will fix vcn2.5 DPG mode
power off issue on instance 1.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add initialitions for PLL2 clock source

[Why]
Starting from 14nm, the PLL is built into the PHY and the PLL is mapped
to PHY on 1 to 1 basis. In the code, the DP port is mapped to a PLL that was not
initialized. This causes DP to HDMI dongle to not light up the display.

[How]
Initializations added for PLL2 when creating resources.

Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Limit minimum DPPCLK to 100MHz.

[Why]
Underflow is observed when plug in a 4K@60 monitor with
1366x768 eDP due to DPPCLK is too low.

[How]
Limit minimum DPPCLK to 100MHz.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check engine is not NULL before acquiring

[Why]
Engine can be NULL in some cases, so we must not acquire it.

[How]
Check for NULL engine before acquiring.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ALSA: usb-audio: Apply sample rate quirk for Audioengine D1

The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate,
but it returns the rate in byte-reversed order.

When setting sampling rate, the driver produces these warning messages:
[168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100
[168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000
[168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000

As can be seen from the hexadecimal conversion, the current rate read
back is byte-reversed from the rate that was set.

44100 == 0x00ac44, 4500480 == 0x44ac00
48000 == 0x00bb80, 8436480 == 0x80bb00
96000 == 0x017700, 30465 == 0x007701

Rather than implementing a new quirk to reverse the order, just skip
checking the rate to avoid spamming the log.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>

drm/amd/display: Use dcfclk to populate watermark ranges

[WHY & HOW]
Previously drain clk was unconstrained and fill clk was constrained on fclk.
We want to change it to fill clk unconstrained and drain clock constrained
to dcfclk.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not set optimized_require to false after plane disable

[WHY]
The optimized_require flag is needed to set watermarks and clocks lower
in certain conditions. This flag is set to true and then set to false
while programming front end in dcn20.

[HOW]
Do not set the flag to false while disabling plane.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix psr static frames calculation

[Why]
Driver crash with psr feature enabled due to divide-by-zero error.
This is a regression after rework to calculate static screen frame
number entry time.

[How]
Correct order of operations to avoid divide-by-zero.

Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ALSA: usb-audio: Fix UAC2/3 effect unit parsing

We've got a regression report about M-Audio Fast Track C400 device,
and the git bisection resulted in the commit e0ccdef92653 ("ALSA:
usb-audio: Clean up check_input_term()").  This commit was about the
rewrite of the input terminal parser, and it's not too obvious from
the change what really broke.  The answer is: it's the interpretation
of UAC2/3 effect units.

In the original code, UAC2 effect unit is as if through UAC1
processing unit because both UAC1 PU and UAC2/3 EU share the same
number (0x07).  The old code went through a complex switch-case
fallthrough, finally bailing out in the middle:

  if (protocol == UAC_VERSION_2 &&
      hdr[2] == UAC2_EFFECT_UNIT) {
         /* UAC2/UAC1 unit IDs overlap here in an
          * uncompatible way. Ignore this unit for now.
          */
         return 0;
   }

... and this special handling was missing in the new code; the new
code treats UAC2/3 effect unit as if it were equivalent with the
processing unit.

Actually, the old code was too confusing.  The effect unit has an
incompatible unit description with the processing unit, so we
shouldn't have dealt with EU in the same way.

This patch addresses the regression by changing the effect unit
handling to the own parser function.  The own parser function makes
the clear distinct with PU, so it improves the readability, too.

The EU parser just sets the type and the id like the old kernels.
Once when the proper effect unit support is added, we can revisit this
parser function, but for now, let's keep this simple setup as is.

Fixes: e0ccdef92653 ("ALSA: usb-audio: Clean up check_input_term()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206147
Link: https://lore.kernel.org/r/20200211160521.31990-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Apply 48kHz fixed rate playback for Jabra Evolve 65 headset

Jabra Evolve 65 headset appears as if supporting lower rates than
48kHz, but it actually doesn't work but with 48kHz for playback.

This patch applies a workaround to enforce the 48kHz like LINE6
devices already did. The workaround is put in a unified helper
function, set_fixed_rate(), to be called from both places now.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206149
Link: https://lore.kernel.org/r/20200211111419.5895-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

drm/i915: Check activity on i915_vma after confirming pin_count==0

Only assert that the i915_vma is now idle if and only if no other pins
are present. If another user has the i915_vma pinned, they may submit
more work to the i915_vma skipping the vm->mutex used to serialise the
unbind. We need to wait again, if we want to continue and unbind this
vma.

However, if we own the i915_vma (we hold the vm->mutex for the unbind
and the pin_count is 0), we can assert that the vma remains idle as we
unbind.

Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/530
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123224459.38128-1-chris@chris-wilson.co.uk
(cherry picked from commit 60e94557fff1f5514c7fc4da7ddc2c7a13ffff26)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/gem: Detect overflow in calculating dumb buffer size

To multiply 2 u32 numbers to generate a u64 in C requires a bit of
forewarning for the compiler.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123125934.1401755-1-chris@chris-wilson.co.uk
(cherry picked from commit 0f8f8a64300092852b9361cd835395ee71e6a7d6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Don't show the blank process name for internal/simulated errors

For a simulated preemption reset, we don't populate the request and so
do not fill in the guilty context name.

[ 79.991294] i915 0000:00:02.0: GPU HANG: ecode 9:1:e757fefe, in [0]

Just don't mention the empty string in the logs!

Fixes: 742379c0c400 ("drm/i915: Start chopping up the GPU error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121132107.267709-1-chris@chris-wilson.co.uk
(cherry picked from commit 29baf3ae8daa4c673de58106ff41c7236dff57f4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/gem: Store mmap_offsets in an rbtree rather than a plain list

Currently we create a new mmap_offset for every call to
mmap_offset_ioctl. This exposes ourselves to an abusive client that may
simply create new mmap_offsets ad infinitum, which will exhaust physical
memory and the virtual address space. In addition to the exhaustion, a
very long linear list of mmap_offsets causes other clients using the
object to incur long list walks -- these long lists can also be
generated by simply having many clients generate their own mmap_offset.

However, we can simply use the drm_vma_node itself to manage the file
association (allow/revoke) dropping our need to keep an mmo per-file.
Then if we keep a small rbtree of per-type mmap_offsets, we can lookup
duplicate requests quickly.

Fixes: cc662126b413 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120104924.4000706-3-chris@chris-wilson.co.uk
(cherry picked from commit 7865559872074a9ab169c87915504661d630addf)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/execlists: Leave resetting ring to intel_ring

We need to allow concurrent intel_context_unpin, which means avoiding
doing destructive operations like intel_ring_reset(). This was already
fixed for intel_ring_unpin() in commit 0725d9a31869 ("drm/i915/gt: Make
intel_ring_unpin() safe for concurrent pint"), but I overlooked that
execlists_context_unpin() also made the same mistake.

Reported-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 841350223816 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin")
References: 0725d9a31869 ("drm/i915/gt: Make intel_ring_unpin() safe for concurrent pint")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115175829.2761329-1-chris@chris-wilson.co.uk
(cherry picked from commit f3c0efc9fe7a4e61544034f525348a3aa86ac5aa)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

arm64: Fix CONFIG_ARCH_RANDOM=n build

The entire asm/archrandom.h header is generically included via
linux/archrandom.h only when CONFIG_ARCH_RANDOM is already set, so the
stub definitions of __arm64_rndr() and __early_cpu_has_rndr() are only
visible to KASLR if it explicitly includes the arch-internal header.

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

ACPI: PM: s2idle: Avoid possible race related to the EC GPE

It is theoretically possible for the ACPI EC GPE to be set after the
s2idle_ops->wake() called from s2idle_loop() has returned and before
the subsequent pm_wakeup_pending() check is carried out. If that
happens, the resulting wakeup event will cause the system to resume
even though it may be a spurious one.

To avoid that race, first make the ->wake() callback in struct
platform_s2idle_ops return a bool value indicating whether or not
to let the system resume and rearrange s2idle_loop() to use that
value instad of the direct pm_wakeup_pending() call if ->wake() is
present.

Next, rework acpi_s2idle_wake() to process EC events and check
pm_wakeup_pending() before re-arming the SCI for system wakeup
to prevent it from triggering prematurely and add comments to
that function to explain the rationale for the new code flow.

Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI: EC: Fix flushing of pending work

Commit 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work")
introduced a subtle bug into the flushing of pending EC work while
suspended to idle, which may cause the EC driver to fail to
re-enable the EC GPE after handling a non-wakeup event (like a
battery status change event, for example).

The problem is that the work item flushed by flush_scheduled_work()
in __acpi_ec_flush_work() may disable the EC GPE and schedule another
work item expected to re-enable it, but that new work item is not
flushed, so __acpi_ec_flush_work() returns with the EC GPE disabled
and the CPU running it goes into an idle state subsequently. If all
of the other CPUs are in idle states at that point, the EC GPE won't
be re-enabled until at least one CPU is woken up by another interrupt
source, so system wakeup events that would normally come from the EC
then don't work.

This is reproducible on a Dell XPS13 9360 in my office which
sometimes stops reacting to power button and lid events (triggered
by the EC on that machine) after switching from AC power to battery
power or vice versa while suspended to idle (each of those switches
causes the EC GPE to trigger for several times in a row, but they
are not system wakeup events).

To avoid this problem, it is necessary to drain the workqueue
entirely in __acpi_ec_flush_work(), but that cannot be done with
respect to system_wq, because work items may be added to it from
other places while __acpi_ec_flush_work() is running. For this
reason, make the EC driver use a dedicated workqueue for EC events
processing (let that workqueue be ordered so that EC events are
processed sequentially) and use drain_workqueue() on it in
__acpi_ec_flush_work().

Fixes: 016b87ca5c8c ("ACPI: EC: Rework flushing of pending work")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

tracing: Consolidate trace() functions

Move the checking, buffer reserve and buffer commit code in
synth_event_trace_start/end() into inline functions
__synth_event_trace_start/end() so they can also be used by
synth_event_trace() and synth_event_trace_array(), and then have all
those functions use them.

Also, change synth_event_trace_state.enabled to disabled so it only
needs to be set if the event is disabled, which is not normally the
case.

Link: http://lkml.kernel.org/r/b1f3108d0f450e58192955a300e31d0405ab4149.1581374549.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Don't return -EINVAL when tracing soft disabled synth events

There's no reason to return -EINVAL when tracing a synthetic event if
it's soft disabled - treat it the same as if it were hard disabled and
return normally.

Have synth_event_trace() and synth_event_trace_array() just return
normally, and have synth_event_trace_start set the trace state to
disabled and return.

Link: http://lkml.kernel.org/r/df5d02a1625aff97c9866506c5bada6a069982ba.1581374549.git.zanussi@kernel.org
Fixes: 8dcc53ad956d2 ("tracing: Add synth_event_trace() and related functions")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Add missing nest end to synth_event_trace_start() error case

If the ring_buffer reserve in synth_event_trace_start() fails, the
matching ring_buffer_nest_end() should be called in the error code,
since nothing else will ever call it in this case.

Link: http://lkml.kernel.org/r/20abc444b3eeff76425f895815380abe7aa53ff8.1581374549.git.zanussi@kernel.org
Fixes: 8dcc53ad956d2 ("tracing: Add synth_event_trace() and related functions")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge branch 'for-5.6-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
"I made a mistake while removing cgroup task list lazy init
  optimization making the root cgroup.procs show entries for the
  init_tasks. The zero entries doesn't cause critical failures but does
  make systemd print out warning messages during boot.

  Fix it by omitting init_tasks as they should be"

* 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: init_tasks shouldn't be linked to the root cgroup

Merge tag 'selinux-pr-20200210' of git://git./linux/kernel/git/pcmoore/selinux

Pull SELinux fixes from Paul Moore:
"Two small fixes: one fixes a locking problem in the recently merged
  label translation code, the other fixes an embarrassing 'binderfs' /
  'binder' filesystem name check"

* tag 'selinux-pr-20200210' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix sidtab string cache locking
  selinux: fix typo in filesystem name

tools/bootconfig: Suppress non-error messages

Suppress non-error messages when applying new bootconfig
to initrd image. To enable it, replace printf for error
message with pr_err() macro.
This also adds a testcase for this fix.

Link: http://lkml.kernel.org/r/158125351377.16911.13283712972275131160.stgit@devnote2
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

bootconfig: Allocate xbc_nodes array dynamically

To reduce the large static array from kernel data, allocate
xbc_nodes array dynamically only if the kernel loads a
bootconfig.

Note that this also add dummy memblock.h for user-spacae
bootconfig tool.

Link: http://lkml.kernel.org/r/158108569699.3187.6512834527603883707.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

kbuild: fix mismatch between .version and include/generated/compile.h

Since commit 56d589361572 ("kbuild: do not create orphan built-in.a or
obj-y objects"), scripts/link-vmlinux.sh does nothing when descending
into init/.

Once the version number becomes out of sync between .version and
include/generated/compile.h, it is not self-healing.

[How to reproduce]

$ echo 100 > .version
$ make

You will see the number in the .version is always bigger than that in
compile.h by one. After this, every time you run 'make', the vmlinux is
re-linked even when none of source files is updated.

Fixes: 56d589361572 ("kbuild: do not create orphan built-in.a or obj-y objects")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

scripts/kallsyms: fix memory corruption caused by write over-run

memcpy() writes one more byte than allocated.

Fixes: 8d60526999aa ("scripts/kallsyms: change table to store (strcut sym_entry *)")
Reported-by: youling257 <youling257@gmail.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>

perf/smmuv3: Use platform_get_irq_optional() for wired interrupt

Even though a SMMUv3 PMCG implementation may use an MSI as the form of
interrupt source, the kernel would still complain that it does not find
the wired (GSIV) interrupt in this case:

root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found"
[   59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found
[   59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found
[   59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found
[   59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found
[   59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found
[   59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found
[   59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found
[   60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found

Use platform_get_irq_optional() to silence the warning.

If neither interrupt source is found, then the driver will still warn that
IRQ setup errored and the probe will fail.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>

bootconfig: Use parse_args() to find bootconfig and '--'

The current implementation does a naive search of "bootconfig" on the kernel
command line. But this could find "bootconfig" that is part of another
option in quotes (although highly unlikely). But it also needs to find '--'
on the kernel command line to know if it should append a '--' or not when a
bootconfig in the initrd file has an "init" section. The check uses the
naive strstr() to find to see if it exists. But this can return a false
positive if it exists in an option and then the "init" section in the initrd
will not be appended properly.

Using parse_args() to find both of these will solve both of these problems.

Link: https://lore.kernel.org/r/202002070954.C18E7F58B@keescook
Fixes: 7495e0926fdf3 ("bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline")
Fixes: 1319916209ce8 ("bootconfig: init: Allow admin to use bootconfig for init command line")
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing/kprobe: Fix uninitialized variable bug

There is a potential execution path in which variable *ret* is returned
without being properly initialized, previously.

Fix this by initializing variable *ret* to 0.

Link: http://lkml.kernel.org/r/20200205223404.GA3379@embeddedor
Addresses-Coverity-ID: 1491142 ("Uninitialized scalar variable")
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

bootconfig: Remove unneeded CONFIG_LIBXBC

Since there is no user except CONFIG_BOOT_CONFIG and no plan
to use it from other functions, CONFIG_LIBXBC can be removed
and we can use CONFIG_BOOT_CONFIG directly.

Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tools/bootconfig: Fix wrong __VA_ARGS__ usage

Since printk() wrapper macro uses __VA_ARGS__ without "##" prefix, it causes
a build error if there is no variable arguments (e.g. only fmt is
specified.) To fix this error, use ##__VA_ARGS__ instead of __VAR_ARGS__.

Link: http://lkml.kernel.org/r/158108370130.2758.10893830923800978011.stgit@devnote2
Fixes: 950313ebf79c ("tools: bootconfig: Add bootconfig command")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

qmi_wwan: unconditionally reject 2 ep interfaces

We have been using the fact that the QMI and DIAG functions
usually are the only ones with class/subclass/protocol being
ff/ff/ff on Quectel modems. This has allowed us to match the
QMI function without knowing the exact interface number,
which can vary depending on firmware configuration.

The ability to silently reject the DIAG function, which is
usually handled by the option driver, is important for this
method to work.  This is done based on the knowledge that it
has exactly 2 bulk endpoints.  QMI function control interfaces
will have either 3 or 1 endpoint. This rule is universal so
the quirk condition can be removed.

The fixed layouts known from the Gobi1k and Gobi2k modems
have been gradually replaced by more dynamic layouts, and
many vendors now use configurable layouts without changing
device IDs.  Renaming the class/subclass/protocol matching
macro makes it more obvious that this is now not Quectel
specific anymore.

Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Prevent truncation of longer interrupt names

When adding support for unique interrupt names, after testing on a few
devices, it was assumed 32 characters would be sufficient. This
assumption turned out to be incorrect, ZII RDU2 for example uses a
device base name of mv88e6xxx-30be0000.ethernet-1:0, leaving no space
for post fixes such as -g1-atu-prob and -watchdog. The names then
become identical, defeating the point of the patch.

Increase the length of the string to 64 charactoes.

Reported-by: Chris Healy <Chris.Healy@zii.aero>
Fixes: 3095383a8ab4 ("net: dsa: mv88e6xxx: Unique IRQ name")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

qmi_wwan: re-add DW5821e pre-production variant

Commit f25e1392fdb5 removed the support for the pre-production variant
of the Dell DW5821e to avoid probing another USB interface unnecessarily.
However, the pre-production samples are found in the wild, and this lack
of support is causing problems for users of such samples.  It is therefore
necessary to support both variants.

Matching on both interfaces 0 and 1 is not expected to cause any problem
with either variant, as only the QMI function will be probed successfully
on either.  Interface 1 will be rejected based on the HID class for the
production variant:

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

And interface 0 will be rejected based on too few endpoints for the
pre-production variant:

T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev= 3.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Fixes: f25e1392fdb5 ("qmi_wwan: fix interface number for DW5821e production firmware")
Link: https://whrl.pl/Rf0vNk
Reported-by: Lars Melin <larsm17@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

gpio: sifive: fix static checker warning

Typcasting "irq_state" leads to the below static checker warning:
The fix is to declare "irq_state" as unsigned long instead of u32.

drivers/gpio/gpio-sifive.c:97 sifive_gpio_irq_enable()
warn: passing casted pointer '&chip->irq_state' to
'assign_bit()' 32 vs 64.

Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Link: https://lore.kernel.org/r/1580189061-14091-1-git-send-email-yash.shah@sifive.com
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drm/i915/gt: Use the BIT when checking the flags, not the index

In converting over to using set_bit()/test_bit(), when manually
inspecting the rq->fence.flags, we need to use BIT().

Fixes: e1c31fb5dde3 ("drm/i915: Merge i915_request.flags with i915_request.fence.flags")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115122509.2673075-1-chris@chris-wilson.co.uk
(cherry picked from commit 72ff2b8d5f2dcb09bfa37b902c23311eec426496)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/selftests: Add a mock i915_vma to the mock_ring

Add a i915_vma to the mock_engine/mock_ring so that the core code can
always assume the presence of ring->vma.

Fixes: 8ccfc20a7d56 ("drm/i915/gt: Mark ring->vma as active while pinned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200114160030.2468927-1-chris@chris-wilson.co.uk
(cherry picked from commit b63b4feaef7363d2cf46dd76bb6e87e060b2b0de)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Make a copy of the ggtt view for slave plane

intel_prepare_plane_fb() will always pin plane_state->hw.fb whenever
it is present. We copy that from the master plane to the slave plane,
but we fail to copy the corresponding ggtt view. Thus when it comes time
to pin the slave plane's fb we use some stale ggtt view left over from
the last time the plane was used as a non-slave plane. If that previous
use involved 90/270 degree rotation or remapping we'll try to shuffle
the pages of the new fb around accordingingly. However the new
fb may be backed by a bo with less pages than what the ggtt view
rotation/remapped info requires, and so we we trip a GEM_BUG().

Steps to reproduce on icl:
1. plane 1: whatever
plane 6: largish !NV12 fb + 90 degree rotation
2. plane 1: smallish NV12 fb
plane 6: make invisible so it gets slaved to plane 1
3. GEM_BUG()

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/951
Fixes: 1f594b209fe1 ("drm/i915: Remove special case slave handling during hw programming, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110183228.8199-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 103605e0d1e77cfb5d0f5a9e8aba7d97f1b49339)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/gem: Take local vma references for the parser

Take and hold a reference to each of the vma (and their objects) as we
process them with the cmdparser. This stops them being freed during the
work if the GEM execbuf is interrupted and the request we expected to
keep the objects alive is incomplete.

Fixes: 686c7c35abc2 ("drm/i915/gem: Asynchronous cmdparser")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/970
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113154555.1909639-1-chris@chris-wilson.co.uk
(cherry picked from commit 36c8e356a76e147f0b631fd29838147c01b50d04)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/pmu: Correct the rc6 offset upon enabling

The rc6 residency starts ticking from 0 from BIOS POST, but the kernel
starts measuring the time from its boot. If we start measuruing
I915_PMU_RC6_RESIDENCY while the GT is idle, we start our sampling from
0 and then upon first activity (park/unpark) add in all the rc6
residency since boot. After the first park with the sampler engaged, the
sleep/active counters are aligned.

v2: With a wakeref to be sure

Closes: https://gitlab.freedesktop.org/drm/intel/issues/973
Fixes: df6a42053513 ("drm/i915/pmu: Ensure monotonic rc6")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200114105648.2172026-1-chris@chris-wilson.co.uk
(cherry picked from commit f4e9894b6952a2819937f363cd42e7cd7894a1e4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

spmi: pmic-arb: Set lockdep class for hierarchical irq domains

I see the following lockdep splat in the qcom pinctrl driver when
attempting to suspend the device.

WARNING: possible recursive locking detected
5.4.11 #3 Tainted: G        W
--------------------------------------------
cat/3074 is trying to acquire lock:
ffffff81f49804c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

but task is already holding lock:
ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

6 locks held by cat/3074:
  #0: ffffff81f01d9420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4
  #1: ffffff81bd7d2080 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc
  #2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc
  #3: ffffffe411a41d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348
  #4: ffffff81f1c5e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c
  #5: ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

stack backtrace:
CPU: 5 PID: 3074 Comm: cat Tainted: G        W         5.4.11 #3
Hardware name: Google Cheza (rev3+) (DT)
Call trace:
  dump_backtrace+0x0/0x174
  show_stack+0x20/0x2c
  dump_stack+0xc8/0x124
  __lock_acquire+0x460/0x2388
  lock_acquire+0x1cc/0x210
  _raw_spin_lock_irqsave+0x64/0x80
  __irq_get_desc_lock+0x64/0x94
  irq_set_irq_wake+0x40/0x144
  qpnpint_irq_set_wake+0x28/0x34
  set_irq_wake_real+0x40/0x5c
  irq_set_irq_wake+0x70/0x144
  pm8941_pwrkey_suspend+0x34/0x44
  platform_pm_suspend+0x34/0x60
  dpm_run_callback+0x64/0xcc
  __device_suspend+0x310/0x41c
  dpm_suspend+0xf8/0x298
  dpm_suspend_start+0x84/0xb4
  suspend_devices_and_enter+0xbc/0x620
  pm_suspend+0x210/0x348
  state_store+0xb0/0x108
  kobj_attr_store+0x14/0x24
  sysfs_kf_write+0x4c/0x64
  kernfs_fop_write+0x15c/0x1fc
  __vfs_write+0x54/0x18c
  vfs_write+0xe4/0x1a4
  ksys_write+0x7c/0xe4
  __arm64_sys_write+0x20/0x2c
  el0_svc_common+0xa8/0x160
  el0_svc_handler+0x7c/0x98
  el0_svc+0x8/0xc

Set a lockdep class when we map the irq so that irq_set_wake() doesn't
warn about a lockdep bug that doesn't exist.

Fixes: 12a9eeaebba3 ("spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200121183748.68662-1-swboyd@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: xilinx: Fix bug where the wrong GPIO register is written to

Care is taken with "index", however with the current version
the actual xgpio_writereg is using index for data but
xgpio_regoffset(chip, i) for the offset. And since i is already
incremented it is incorrect. This patch fixes it so that index
is used for the offset too.

Cc: stable@vger.kernel.org
Signed-off-by: Paul Thomas <pthomas8589@gmail.com>
Link: https://lore.kernel.org/r/20200125221410.8022-1-pthomas8589@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'gpio-fixes-for-v5.6-rc2' of git://git./linux/kernel/git/brgl/linux into fixes

gpio fixes for v5.6-rc2

- fix a regression introduced by gpio_do_set_config()
- sort GPIO entries in MAINTAINERS
- remove leftover defines in gpio-bd71828
- remove an redundant switch case in gpio_set_config()

arm64/spinlock: fix a -Wunused-function warning

The commit f5bfdc8e3947 ("locking/osq: Use optimized spinning loop for
arm64") introduced a warning from Clang because vcpu_is_preempted() is
compiled away,

kernel/locking/osq_lock.c:25:19: warning: unused function 'node_cpu'
[-Wunused-function]
static inline int node_cpu(struct optimistic_spin_node *node)
^
1 warning generated.

Fix it by converting vcpu_is_preempted() to a static inline function.

Fixes: f5bfdc8e3947 ("locking/osq: Use optimized spinning loop for arm64")
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: ssbs: Fix context-switch when SSBS is present on all CPUs

When all CPUs in the system implement the SSBS extension, the SSBS field
in PSTATE is the definitive indication of the mitigation state. Further,
when the CPUs implement the SSBS manipulation instructions (advertised
to userspace via an HWCAP), EL0 can toggle the SSBS field directly and
so we cannot rely on any shadow state such as TIF_SSBD at all.

Avoid forcing the SSBS field in context-switch on such a system, and
simply rely on the PSTATE register instead.

Cc: <stable@vger.kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Srinivas Ramana <sramana@codeaurora.org>
Fixes: cbdf8a189a66 ("arm64: Force SSBS on context switch")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: use shared sysctl constants

Use shared sysctl variables for zero and one constants, as in
commit eec4844fae7c ("proc/sysctl: add shared variables for range check")

Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Drop do_el0_ia_bp_hardening() & do_sp_pc_abort() declarations

There is a redundant do_sp_pc_abort() declaration in exceptions.h which can
be removed. Also do_el0_ia_bp_hardening() as been already been dropped with
the commit bfe298745afc ("arm64: entry-common: don't touch daif before
bp-hardening") and hence does not need a declaration any more. This should
not introduce any functional change.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

gpiolib: remove unnecessary argument from set_config call

Remove unnecessary argument when setting PIN_CONFIG_BIAS_DISABLE. No
argument is expected by pinctrl, so removing it should be harmless.

Fixes: 2148ad7790ea ("gpiolib: add support for disabling line bias")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpio: bd71828: Remove unneeded defines for GPIO_LINE_DIRECTION_IN/OUT

They are defined in gpio/driver.h now.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

MAINTAINERS: Sort entries in database for GPIO

Run parse-maintainers.pl and choose GPIO records. Fix them accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

gpiolib: fix gpio_do_set_config()

Commit d90f36851d65 ("gpiolib: have a single place of calling
set_config()") introduced a regression where we don't pass the right
variable as argument to the set_config() callback of gpio driver from
gpio_set_config(). After reverting two additional patches that came
on top of it - this addresses the issue by changing the type of the last
argument of gpio_do_set_config() to unsigned long and making sure the
packed config variable is actually used in gpio_set_config().

Fixes: d90f36851d65 ("gpiolib: have a single place of calling set_config()")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>

Revert "gpiolib: remove set but not used variable 'config'"

This reverts commit e5e42ad224a040f93bf112e96f82b3a0ed97ffab.

This patch came on top of another patch that introduced a regression.
Revert it before addressing the culprit.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>

Revert "gpiolib: Remove duplicated function gpio_do_set_config()"

This reverts commit d18fddff061d2796525e6d4a958cb3d30aed8efd.

This patch came on top of another patch that introduced a regression.
Revert it before addressing the culprit.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>

tipc: fix successful connect() but timed out

In commit 9546a0b7ce00 ("tipc: fix wrong connect() return code"), we
fixed the issue with the 'connect()' that returns zero even though the
connecting has failed by waiting for the connection to be 'ESTABLISHED'
really. However, the approach has one drawback in conjunction with our
'lightweight' connection setup mechanism that the following scenario
can happen:

          (server)                        (client)

   +- accept()|                      |             wait_for_conn()
   |          |                      |connect() -------+
   |          |<-------[SYN]---------|                 > sleeping
   |          |                      *CONNECTING       |
   |--------->*ESTABLISHED           |                 |
              |--------[ACK]-------->*ESTABLISHED      > wakeup()
        send()|--------[DATA]------->|\                > wakeup()
        send()|--------[DATA]------->| |               > wakeup()
          .   .          .           . |-> recvq       .
          .   .          .           . |               .
        send()|--------[DATA]------->|/                > wakeup()
       close()|--------[FIN]-------->*DISCONNECTING    |
              *DISCONNECTING         |                 |
              |                      ~~~~~~~~~~~~~~~~~~> schedule()
                                                       | wait again
                                                       .
                                                       .
                                                       | ETIMEDOUT

Upon the receipt of the server 'ACK', the client becomes 'ESTABLISHED'
and the 'wait_for_conn()' process is woken up but not run. Meanwhile,
the server starts to send a number of data following by a 'close()'
shortly without waiting any response from the client, which then forces
the client socket to be 'DISCONNECTING' immediately. When the wait
process is switched to be running, it continues to wait until the timer
expires because of the unexpected socket state. The client 'connect()'
will finally get ‘-ETIMEDOUT’ and force to release the socket whereas
there remains the messages in its receive queue.

Obviously the issue would not happen if the server had some delay prior
to its 'close()' (or the number of 'DATA' messages is large enough),
but any kind of delay would make the connection setup/shutdown "heavy".
We solve this by simply allowing the 'connect()' returns zero in this
particular case. The socket is already 'DISCONNECTING', so any further
write will get '-EPIPE' but the socket is still able to read the
messages existing in its receive queue.

Note: This solution doesn't break the previous one as it deals with a
different situation that the socket state is 'DISCONNECTING' but has no
error (i.e. sk->sk_err = 0).

Fixes: 9546a0b7ce00 ("tipc: fix wrong connect() return code")
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: make the symbol 'mptcp_sk_clone_lock' static

Fix the following sparse warning:
net/mptcp/protocol.c:646:13: warning: symbol 'mptcp_sk_clone_lock' was not declared. Should it be static?

Fixes: b0519de8b3f1 ("mptcp: fix use-after-free for ipv6")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: make three functions static

Fix the following sparse warning:

net/tipc/node.c:281:6: warning: symbol 'tipc_node_free' was not declared. Should it be static?
net/tipc/node.c:2801:5: warning: symbol '__tipc_nl_node_set_key' was not declared. Should it be static?
net/tipc/node.c:2878:5: warning: symbol '__tipc_nl_node_flush_key' was not declared. Should it be static?

Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Fixes: e1f32190cf7d ("tipc: add support for AEAD key setting via netlink")

Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drm/i915/gvt: more locking for ppgtt mm LRU list

When the lock was introduced in commit 72aabfb862e40 ("drm/i915/gvt: Add mutual
lock for ppgtt mm LRU list") one place got lost.

Fixes: 72aabfb862e4 ("drm/i915/gvt: Add mutual lock for ppgtt mm LRU list")
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1580742421-25194-1-git-send-email-igor.druzhinin@citrix.com

drm/i915/gvt: fix high-order allocation failure on late load

If the module happens to be loaded later at runtime there is a chance
memory is already fragmented enough to fail allocation of firmware
blob storage and consequently GVT init. Since it doesn't seem to be
necessary to have the blob contiguous, use vmalloc() instead to avoid
the issue.

Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1579723824-25711-1-git-send-email-igor.druzhinin@citrix.com

Linux 5.6-rc1

Merge tag 'kbuild-v5.6-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

- fix randconfig to generate a sane .config

- rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

- optimize scripts/kallsyms

- fix yes2modconfig and mod2yesconfig

- make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config

Merge tag 'zonefs-5.6-rc1' of git://git./linux/kernel/git/dlemoal/zonefs

Pull new zonefs file system from Damien Le Moal:
"Zonefs is a very simple file system exposing each zone of a zoned
  block device as a file.

  Unlike a regular file system with native zoned block device support
  (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
  sequential write constraint of zoned block devices to the user. As a
  result, zonefs is not a POSIX compliant file system. Its goal is to
  simplify the implementation of zoned block devices support in
  applications by replacing raw block device file accesses with a richer
  file based API, avoiding relying on direct block device file ioctls
  which may be more obscure to developers.

  One example of this approach is the implementation of LSM
  (log-structured merge) tree structures (such as used in RocksDB and
  LevelDB) on zoned block devices by allowing SSTables to be stored in a
  zone file similarly to a regular file system rather than as a range of
  sectors of a zoned device. The introduction of the higher level
  construct "one file is one zone" can help reducing the amount of
  changes needed in the application while at the same time allowing the
  use of zoned block devices with various programming languages other
  than C.

  Zonefs IO management implementation uses the new iomap generic code.
  Zonefs has been successfully tested using a functional test suite
  (available with zonefs userland format tool on github) and a prototype
  implementation of LevelDB on top of zonefs"

* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Add documentation
  fs: New zonefs file system

irqchip/gic-v4.1: Avoid 64bit division for the sake of 32bit ARM

In order to allow the GICv4 code to link properly on 32bit ARM,
make sure we don't use 64bit divisions when it isn't strictly
necessary.

Fixes: 4e6437f12d6e ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week:

   - Important fix for multichannel and for modefromsid mounts.

   - Two reconnect fixes

   - Addition of SMB3 change notify support

   - Backup tools fix

   - A few additional minor debug improvements (tracepoints and
     additional logging found useful during testing this week)"

* tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Add defines for new information level, FileIdInformation
  smb3: print warning once if posix context returned on open
  smb3: add one more dynamic tracepoint missing from strict fsync path
  cifs: fix mode bits from dir listing when mounted with modefromsid
  cifs: fix channel signing
  cifs: add SMB3 change notification support
  cifs: make multichannel warning more visible
  cifs: fix soft mounts hanging in the reconnect code
  cifs: Add tracepoints for errors on flush or fsync
  cifs: log warning message (once) if out of disk space
  cifs: fail i/o on soft mounts if sessionsetup errors out
  smb3: fix problem with null cifs super block with previous patch
  SMB3: Backup intent flag missing from some more ops

Merge branch 'work.vboxsf' of git://git./linux/kernel/git/viro/vfs

Pull vboxfs from Al Viro:
"This is the VirtualBox guest shared folder support by Hans de Goede,
  with fixups for fs_parse folded in to avoid bisection hazards from
  those API changes..."

* 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Add VirtualBox guest shared folder (vboxsf) support

Merge tag 'x86-urgent-2020-02-09' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:

   - Ensure that the PIT is set up when the local APIC is disable or
     configured in legacy mode. This is caused by an ordering issue
     introduced in the recent changes which skip PIT initialization when
     the TSC and APIC frequencies are already known.

   - Handle malformed SRAT tables during early ACPI parsing which caused
     an infinite loop anda boot hang.

   - Fix a long standing race in the affinity setting code which affects
     PCI devices with non-maskable MSI interrupts. The problem is caused
     by the non-atomic writes of the MSI address (destination APIC id)
     and data (vector) fields which the device uses to construct the MSI
     message. The non-atomic writes are mandated by PCI.

     If both fields change and the device raises an interrupt after
     writing address and before writing data, then the MSI block
     constructs a inconsistent message which causes interrupts to be
     lost and subsequent malfunction of the device.

     The fix is to redirect the interrupt to the new vector on the
     current CPU first and then switch it over to the new target CPU.
     This allows to observe an eventually raised interrupt in the
     transitional stage (old CPU, new vector) to be observed in the APIC
     IRR and retriggered on the new target CPU and the new vector.

     The potential spurious interrupts caused by this are harmless and
     can in the worst case expose a buggy driver (all handlers have to
     be able to deal with spurious interrupts as they can and do happen
     for various reasons).

   - Add the missing suspend/resume mechanism for the HYPERV hypercall
     page which prevents resume hibernation on HYPERV guests. This
     change got lost before the merge window.

   - Mask the IOAPIC before disabling the local APIC to prevent
     potentially stale IOAPIC remote IRR bits which cause stale
     interrupt lines after resume"

* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Mask IOAPIC entries when disabling the local APIC
  x86/hyperv: Suspend/resume the hypercall page for hibernation
  x86/apic/msi: Plug non-maskable MSI affinity race
  x86/boot: Handle malformed SRAT tables during early ACPI parsing
  x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode

Merge tag 'smp-urgent-2020-02-09' of git://git./linux/kernel/git/tip/tip

Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP related functionality:

   - Make the UP version of smp_call_function_single() match SMP
     semantics when called for a not available CPU. Instead of emitting
     a warning and assuming that the function call target is CPU0,
     return a proper error code like the SMP version does.

   - Remove a superfluous check in smp_call_function_many_cond()"

* tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp/up: Make smp_call_function_single() match SMP semantics
  smp: Remove superfluous cond_func check in smp_call_function_many_cond()

Merge tag 'perf-urgent-2020-02-09' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
"A set of fixes and improvements for the perf subsystem:

  Kernel fixes:

   - Install cgroup events to the correct CPU context to prevent a
     potential list double add

   - Prevent an integer underflow in the perf mlock accounting

   - Add a missing prototype for arch_perf_update_userpage()

  Tooling:

   - Add a missing unlock in the error path of maps__insert() in perf
     maps.

   - Fix the build with the latest libbfd

   - Fix the perf parser so it does not delete parse event terms, which
     caused a regression for using perf with the ARM CoreSight as the
     sink configuration was missing due to the deletion.

   - Fix the double free in the perf CPU map merging test case

   - Add the missing ustring support for the perf probe command"

* tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf maps: Add missing unlock to maps__insert() error case
  perf probe: Add ustring support for perf probe command
  perf: Make perf able to build with latest libbfd
  perf test: Fix test case Merge cpu map
  perf parse: Copy string to perf_evsel_config_term
  perf parse: Refactor 'struct perf_evsel_config_term'
  kernel/events: Add a missing prototype for arch_perf_update_userpage()
  perf/cgroups: Install cgroup events to correct cpuctx
  perf/core: Fix mlock accounting in perf_mmap()

Merge tag 'timers-urgent-2020-02-09' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
"Two small fixes for the time(r) subsystem:

   - Handle a subtle race between the clocksource watchdog and a
     concurrent clocksource watchdog stop/start sequence correctly to
     prevent a timer double add bug.

   - Fix the file path for the core time namespace file"

* tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Prevent double add_timer_on() for watchdog_timer
  MAINTAINERS: Correct path to time namespace source file

Merge tag 'irq-urgent-2020-02-09' of git://git./linux/kernel/git/tip/tip

Pull interrupt fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem:

   - Provision only ACPI enabled redistributors on GICv3

   - Use the proper command colums when building the INVALL command for
     the GICv3-ITS

   - Ensure the allocation of the L2 vPE table for GICv4.1

   - Correct the GICv4.1 VPROBASER programming so it uses the proper
     size

   - A set of small GICv4.1 tidy up patches

   - Configuration cleanup for C-SKY interrupt chip

   - Clarify the function documentation for irq_set_wake() to document
     that the wakeup functionality is orthogonal to the irq
     disable/enable mechanism"

* tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors
  irqchip/gic-v3-its: Remove superfluous WARN_ON
  irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()
  irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level
  irqchip/gic-v4.1: Set vpe_l1_base for all redistributors
  irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE
  genirq: Clarify that irq wake state is orthogonal to enable/disable
  irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
  irqchip: Some Kconfig cleanup for C-SKY
  irqchip/gic-v3: Only provision redistributors that are enabled in ACPI

Merge tag 'efi-urgent-2020-02-09' of git://git./linux/kernel/git/tip/tip

Pull EFI fix from Thomas Gleixner:
"A single fix for a EFI boot regression on X86 which was caused by the
  recent rework of the EFI memory map parsing. On systems with invalid
  memmap entries the cleanup function uses an value which cannot be
  relied on in this stage. Use the actual EFI memmap entry instead"

* tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/x86: Fix boot regression on systems with invalid memmap entries

drm/i915: Fix i915_error_state_store error defination

Since commit 742379c0c4001 ("drm/i915: Start chopping up the GPU error
capture"), function 'i915_error_state_store' was defined and used with
only one parameter.

But if no 'CONFIG_DRM_I915_CAPTURE_ERROR', this function was defined
with two parameter.

This may lead compile error. This patch fix it.

Fixes: 742379c0c400 ("drm/i915: Start chopping up the GPU error capture")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117073436.6507-1-zhangxiaoxu5@huawei.com
(cherry picked from commit 04062c58faafddf62006c6f8e5077dc050e8207e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/bios: Fix the timing parameters

Fix htotal and vtotal parameters derived from DTD block of VBT. The
values miss the back porch.

Fixes: 33ef6d4fd8df ("drm/i915/vbt: Handle generic DTD block")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124125829.16973-1-vandita.kulkarni@intel.com
(cherry picked from commit ad278f358446707d03a1fe89f880e6ac80ca06cd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsi: Ensure that the ACPI adapter lookup overrides the bus num

Remove the i2c_bus_num >= 0 check from the adapter lookup function
as this would prevent ACPI bus number override. This check was mainly
there to return early if the bus number has already been found but we
anyway return in the next line if the slave address does not match.

Fixes: 8cbf89db2941 ("drm/i915/dsi: Parse the I2C element from the VBT MIPI sequence block (v3)")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200118005848.20382-1-vivek.kasireddy@intel.com
(cherry picked from commit de409661c4c90d63cfc64579edbad0a6b10bd50d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Fix post-fastset modeset check for port sync

The post-fastset "does anyone still need a full modeset?" for
port sync looks busted. The outer loop bails out of a full modeset
is still needed by the current crtc, and then we skip forcing
a full modeset on the related crtcs. That's totally the opposite
of what we want.

The MST path has the logic mostly the other way around so it
looks correct. To fix the port sync case let's follow the MST
logic for both. So, if the current crtc already needs a modeset
we do nothing. otherwise we check if any of the related crtcs
needs a modeset, and if so we force a full modeset for the
current crtc.

And while at let's change the else if to a plain if to so
we don't have needless coupling between the MST and port sync
checks.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 05a8e45136ca ("drm/i915/display: Use external dependency loop for port sync")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit d0eed1545fe75f115a548691a008e94b0e7abc45)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsi: Lookup the i2c bus from ACPI NS only if CONFIG_ACPI=y (v2)

Perform the i2c bus/adapter lookup from ACPI Namespace only if ACPI is
enabled in the kernel config. If ACPI is not enabled or if the lookup
fails, we'll fallback to using the VBT for identifying the i2c bus.

v2: Add fixes tag (Jani)

Fixes: 8cbf89db2941 ("drm/i915/dsi: Parse the I2C element from the VBT MIPI sequence block (v3)")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115012305.27395-1-vivek.kasireddy@intel.com
(cherry picked from commit 960287ca58fd549af9826ff1cb735fe17d031486)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull misc SCSI fixes from James Bottomley:
"Five small patches, all in drivers or doc, which missed the initial
  pull request.

  The qla2xxx and megaraid_sas are actual fixes and the rest are
  spelling and doc changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: fix spelling mistake "initilized" -> "initialized"
  scsi: pm80xx: fix spelling mistake "to" -> "too"
  scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com
  scsi: megaraid_sas: fixup MSIx interrupt setup during resume
  scsi: qla2xxx: Fix unbound NVME response length

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.

2) Fix thermal zone registration in iwlwifi, from Andrei
    Otcheretianski.

3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.

4) Use after free in mptcp, from Florian Westphal.

5) Use after free in wireguard's root_remove_peer_lists, from Eric
    Dumazet.

6) Properly access packets heads in bonding alb code, from Eric
    Dumazet.

7) Fix data race in skb_queue_len(), from Qian Cai.

8) Fix regression in r8169 on some chips, from Heiner Kallweit.

9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.

10) Certain kinds of set link netlink operations can cause a NULL deref
    in the ipv6 addrconf code. Fix from Eric Dumazet.

11) Don't cancel uninitialized work queue in drop monitor, from Ido
    Schimmel.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  net: thunderx: use proper interface type for RGMII
  mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
  bpf: Improve bucket_log calculation logic
  selftests/bpf: Test freeing sockmap/sockhash with a socket in it
  bpf, sockhash: Synchronize_rcu before free'ing map
  bpf, sockmap: Don't sleep while holding RCU lock on tear-down
  bpftool: Don't crash on missing xlated program instructions
  bpf, sockmap: Check update requirements after locking
  drop_monitor: Do not cancel uninitialized work item
  mlxsw: spectrum_dpipe: Add missing error path
  mlxsw: core: Add validation of hardware device types for MGPIR register
  mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
  selftests: mlxsw: Add test cases for local table route replacement
  mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
  net: dsa: microchip: enable module autoprobe
  ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
  dpaa_eth: support all modes with rate adapting PHYs
  net: stmmac: update pci platform data to use phy_interface
  net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
  net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
  ...

fs: Add VirtualBox guest shared folder (vboxsf) support

VirtualBox hosts can share folders with guests, this commit adds a
VFS driver implementing the Linux-guest side of this, allowing folders
exported by the host to be mounted under Linux.

This driver depends on the guest <-> host IPC functions exported by
the vboxguest driver.

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'powerpc-5.6-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix an existing bug in our user access handling, exposed by one of
   the bug fixes we merged this cycle.

- A fix for a boot hang on 32-bit with CONFIG_TRACE_IRQFLAGS and the
   recently added CONFIG_VMAP_STACK.

Thanks to: Christophe Leroy, Guenter Roeck.

* tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK
  powerpc/futex: Fix incorrect user access blocking