OSDN Git Service
Thomas Zimmermann [Mon, 8 Nov 2021 09:31:47 +0000 (10:31 +0100)]
drm/shmem-helper: Unexport drm_gem_shmem_create_with_handle()
Turn drm_gem_shmem_create_with_handle() into an internal helper
function. It's not used outside of the compilation unit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108093149.7226-2-tzimmermann@suse.de
Hans Verkuil [Wed, 10 Nov 2021 15:58:42 +0000 (16:58 +0100)]
drm/nouveau: set RGB quantization range to FULL
The nouveau driver outputs full range RGB, but the AVI InfoFrame just says
'Default' instead of 'Full'.
Call drm_hdmi_avi_infoframe_quant_range to fill in the quantization field
of the AVI InfoFrame correctly. Now displays that advertise RGB Selectable
Quantization Range in their EDID will understand that full range is
transmitted by the HDMI output. This is consistent to how the Nvidia's
driver behaves.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e9a4a58a-0500-50f6-58cc-938a253cedeb@xs4all.nl
Luo Jiaxing [Thu, 25 Feb 2021 07:51:42 +0000 (15:51 +0800)]
drm/nouveau/kms: delete an useless function call in nouveau_framebuffer_new()
nouveau_framebuffer_new() call drm_format_info_plane_width() to get a width
of plane, but width is not used then, so it's a useless function call here.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Luo Jiaxing [Thu, 25 Feb 2021 07:27:06 +0000 (15:27 +0800)]
drm/nouveau/kms/nv50-: Remove several set but not used variables "ret" in disp.c
Fixes the following warning when using W=1 to build kernel:
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function ‘nv50_mstm_cleanup’:
drivers/gpu/drm/nouveau/dispnv50/disp.c:1389:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
1389 | int ret;
| ^~~
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function ‘nv50_mstm_prepare’:
drivers/gpu/drm/nouveau/dispnv50/disp.c:1413:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
1413 | int ret;
| ^~~
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Jiapeng Chong [Fri, 26 Feb 2021 10:07:15 +0000 (18:07 +0800)]
drm/nouveau/fifo: make tu102_fifo_runlist static
Fix the following sparse warning:
drivers/gpu/drm/nouveau/nvkm/engine/fifo/tu102.c:53:1: warning: symbol
'tu102_fifo_runlist' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lee Jones [Wed, 3 Mar 2021 13:42:43 +0000 (13:42 +0000)]
drm/nouveau/dispnv50/headc57d: Make local function 'headc57d_olut' static
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/nouveau/dispnv50/headc57d.c:173:1: warning: no previous prototype for ‘headc57d_olut’ [-Wmissing-prototypes]
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Luo Jiaxing [Mon, 8 Mar 2021 08:32:52 +0000 (16:32 +0800)]
drm/nouveau/device: use snprintf() to replace strncpy() to avoid NUL-terminated string loss
Following warning is found when using W=1 to build kernel:
In function ‘nvkm_udevice_info’,
inlined from ‘nvkm_udevice_mthd’ at drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:195:10:
drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:164:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
164 | strncpy(args->v0.chip, device->chip->name, sizeof(args->v0.chip));
drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:165:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation]
165 | strncpy(args->v0.name, device->name, sizeof(args->v0.name));
The reason of this warning is strncpy() does not guarantee that the
destination buffer will be NUL terminated. If the length of source string
is bigger than number we set by third input parameter, only a part of
characters is copied to the destination, and no NUL-terminated string is
automatically added. There are some potential risks.
So use snprintf() to replace strncpy().
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Ilia Mirkin [Sun, 7 Mar 2021 17:48:53 +0000 (12:48 -0500)]
drm/nouveau/kms/nv04: use vzalloc for nv04_display
The struct is giant, and triggers an order-7 allocation (512K). There is
no reason for this to be kmalloc-type memory, so switch to vmalloc. This
should help loading nouveau on low-memory and/or long-running systems.
Reported-by: Nathan E. Egge <unlord@xiph.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
tangchunyou [Wed, 17 Mar 2021 09:35:45 +0000 (17:35 +0800)]
nouveau/nvkm/subdev/devinit/mcp89.c:Unneeded variable
disable,delete disable and return 0
Signed-off-by: tangchunyou <tangchunyou@yulong.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lyude Paul [Wed, 17 Mar 2021 23:01:46 +0000 (19:01 -0400)]
drm/nouveau/kms/nv50-: Always validate LUTs in nv50_head_atomic_check_lut()
When it comes to gamma or degamma luts, nouveau will actually skip the
calculation of certain LUTs depending on the head and plane states. For
instance, when the head is disabled we don't perform any error checking on
the gamma LUT, and likewise if no planes are present and enabled in our
atomic state we will skip error checking the degamma LUT. This is a bit of
a problem though, since the per-head gamma and degamma props in DRM can be
changed even while a head is disabled - a situation which can be triggered
by the igt testcase mentioned down below.
Originally I thought this was a bit silly and was tempted to just fix the
igt test to only set gamma/degamma with the head enabled. After a bit of
thinking though I realized we should fix this in nouveau. This is because
if a program decides to set an invalid LUT for a head before enabling the
head, such a property change would succeed while also making it impossible
to turn the head back on until the LUT is removed or corrected - something
that could be painful for a user to figure out.
So, fix this checking both degamma and gamma LUTs unconditionally during
atomic checks. We start by calling nv50_head_atomic_check_lut() regardless
of whether the head is active or not in nv50_head_atomic_check(). Then we
move the ilut error checking into nv50_head_atomic_check_lut() and add a
per-head hook for it, primarily because as a per-CRTC property DRM we want
the LUT to be error checked by the head any time it's included in an atomic
state. Of course though, actual programming of the degamma lut to hardware
is still handled in each plane's atomic check and commit.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Testcase: igt/kms_color/pipe-invalid-*-lut-sizes
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lyude Paul [Wed, 17 Mar 2021 23:01:45 +0000 (19:01 -0400)]
drm/nouveau/kms/nv50-: Use NV_ATOMIC() in nv50_head_atomic_check_lut()
Since this is used in the atomic check, we should use the right debug macro
for it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Jiapeng Chong [Fri, 19 Mar 2021 08:40:40 +0000 (16:40 +0800)]
drm/nouveau: Remove unused variable ret
Fix the following coccicheck warnings:
./drivers/gpu/drm/nouveau/nouveau_bios.c:2048:5-8: Unneeded variable:
"ret". Return "0" on line 2061.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lyude Paul [Thu, 18 Mar 2021 23:03:49 +0000 (19:03 -0400)]
drm/nouveau/kms/nv50-: Correct size checks for cursors
Found this while trying to make some changes to the kms_cursor_crc test.
curs507a_acquire checks that the width and height of the cursor framebuffer
are equal (asyw->image.{w,h}). This isn't entirely correct though, as the
height of the cursor can be larger than the size of the cursor, as long as
the width is the same as the cursor size and there's no framebuffer offset.
Note that I'm not entirely sure why this wasn't previously breaking
kms_cursor_crc tests - they all set up cursors with the height being one
pixel larger than the actual size of the cursor. But this seems to fix
things, and the code before was definitely incorrect - so it's not really
worth looking into further imho.
Changes since v1:
* Don't use crtc_w everywhere for determining cursor layout, just use fb
size again
* Change check so that we only check that the w/h of the cursor plane is
the same, the width of the scanout surface is the same as the framebuffer
width, and that there's no offset being used for the cursor surface.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Martin Peres <martin.peres@mupuf.org>
Cc: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Bhaskar Chowdhury [Wed, 24 Mar 2021 06:34:40 +0000 (12:04 +0530)]
drm/nouveau/bios/init: A typo fix
s/conditon/condition/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Zou Wei [Tue, 23 Mar 2021 07:48:57 +0000 (07:48 +0000)]
drm/nouveau/core/client: Mark nvkm_uclient_sclass with static keyword
Fix the following sparse warning:
drivers/gpu/drm/nouveau/nvkm/core/client.c:64:1: warning: symbol 'nvkm_uclient_sclass' was not declared. Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Ben Skeggs [Thu, 25 Feb 2021 04:54:59 +0000 (14:54 +1000)]
drm/nouveau/pmu/gm200-: use alternate falcon reset sequence
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Ben Skeggs [Wed, 24 Feb 2021 09:29:52 +0000 (19:29 +1000)]
drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR
There have been reports of the WFI timing out on some boards, and a
patch was proposed to just remove it. This stuff is rather fragile,
and I believe the WFI might be needed with our FW prior to GM200.
However, we probably should not be touching PMU during init on GPUs
where we depend on NVIDIA FW, outside of limited circumstances, so
this should be a somewhat safer change that achieves the desired
result.
Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lyude Paul [Tue, 19 Jan 2021 01:48:49 +0000 (20:48 -0500)]
drm/nouveau/kms/nv140-: Add CRC methods to gv100_disp_core_mthd_head
Noticed this while trying to figure out the bit that we need to set in
order to get cursor CRCs to come up correctly on volta+: we never actually
went and added these methods to gv100_disp_core_mthd_head in
drm/nouveau/nvkm/engine/disp/coregv100.c which means we don't trace their
values when disp tracing is enabled in nvkm. So, fix that.
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lyude Paul [Tue, 23 Feb 2021 23:56:47 +0000 (18:56 -0500)]
drm/nouveau/kms/nvd9-nv138: Fix CRC calculation for the cursor channel
Something that didn't get noticed until I started running cursor tests:
we're accidentally disabling an option for CRC calculation that's enabled
by default: WidePipeCrc, which controls whether we use the full width of
the data in the display pipe in order calculate CRCs. Having this disabled
apparently causes frames with the cursor plane enabled to generate
different CRCs than frames without the cursor plane enabled, even if the
frames are pixel-equivalent.
So, let's make sure to enable this and fix a bunch of cursor related tests
in IGT.
v2:
* Nvidia added the specific bit we were using to fix this issues to
open-gpu-docs, so pull in the actual macro definitions for it
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lyude Paul [Tue, 19 Jan 2021 01:48:47 +0000 (20:48 -0500)]
drm/nouveau/kms/nv140-: Use hard-coded wndws or core channel for CRC channel
Originally it was assumed based on Nvidia's open-gpu-docs and testing that
NVDisplay required that at least one wndw which belongs to a given head to
be used as the controlling channel
(NVC37D_HEAD_SET_CRC_CONTROL_CONTROLLING_CHANNEL) in order for CRC capture
to function. While this is the case on Volta, Turing actually adds the
ability to instead use the core channel as the controlling channel. For
Turing this is quite useful, as it means that we can always default to the
core channel as the controlling channel and we don't need to be concerned
about ensuring we have at least one wndw channel owned by a head with CRC
output enabled. While Volta lacks this ability, Volta conveniently also
lacks flexible wndw mapping - meaning that we can always rely on each head
having four wndw channels mapped to it regardless of the atomic state.
So, simply use the hard-coded wndw mappings we're guaranteed to have on
Volta as the controlling channel, and use the core channel as the
controlling channel for Turing+. As a result this also renders the plane
ownership logic in nv50_crc_atomic_check() unnessecary, which gives us one
less thing to implement when we get support for flexible wndw mapping. We
also can entirely drop the wndw parameter from our set_src callbacks, and
the atomic state.
v2 (Karol): put prackets around complex macro definition
removed spaces before :32 in structs
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lyude Paul [Tue, 19 Jan 2021 01:48:46 +0000 (20:48 -0500)]
drm/nouveau/kms/nv50-: Check vbl count after CRC context flip
While I haven't seen us take too long in nv50_crc_ctx_flip_work() outside
of users with kernel logging on a serial port, it probably would be a good
idea to check how long we take just in case we need to go faster in the
future.
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Lyude Paul [Tue, 19 Jan 2021 01:48:45 +0000 (20:48 -0500)]
drm/nouveau/kms/nv50-: Use drm_dbg_kms() in crc.c
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Karol Herbst [Wed, 10 Nov 2021 13:31:57 +0000 (14:31 +0100)]
MAINTAINERS: update information for nouveau
Some side notes on this. Atm we do want to use gitlab for bug tracking and
merge requests. But due to the nature of the current linux kernel
development, we can only do so for nouveau internal changes.
Everything else still needs to be sent as emails and this is also includes
changes to UAPI etc.
Anyway, if somebody wants to submit patches via gitlab, they are free to
do so and this should just make this more official and documented.
People listed as maintainers are such that have push access to drm-misc
(where changes are pushed to after landing in gitlab) and are known
nouveau developers.
We did this already for some trivial changes and critical bug fixes
already, we just weren't thinking about updating the MAINTAINERS file.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110133157.553251-1-kherbst@redhat.com
Neil Armstrong [Wed, 20 Oct 2021 12:39:47 +0000 (14:39 +0200)]
drm/meson: encoder_cvbs: switch to bridge with ATTACH_NO_CONNECTOR
Drop the local connector and move all callback to bridge funcs in order
to leverage the generic CVBS display connector.
This will also permit adding custom cvbs connectors for ADC based HPD
detection on some Amlogic SoC based boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed diplay typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-7-narmstrong@baylibre.com
Neil Armstrong [Wed, 20 Oct 2021 12:39:46 +0000 (14:39 +0200)]
drm/meson: rename venc_cvbs to encoder_cvbs
Rename the cvbs encoder to match the newly introduced meson_encoder_hdmi.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-6-narmstrong@baylibre.com
Neil Armstrong [Wed, 20 Oct 2021 12:39:45 +0000 (14:39 +0200)]
drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR
This implements the necessary change to no more use the embedded
connector in dw-hdmi and use the dedicated bridge connector driver
by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
The necessary connector properties are added to handle the same
functionalities as the embedded dw-hdmi connector, i.e. the HDR
metadata, the CEC notifier & other flags.
The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-5-narmstrong@baylibre.com
Neil Armstrong [Wed, 20 Oct 2021 12:39:44 +0000 (14:39 +0200)]
drm/meson: split out encoder from meson_dw_hdmi
This moves all the non-DW-HDMI code where it should be:
an encoder in the drm/meson core driver.
The bridge functions are copied as-is, except:
- the encoder init uses the simple kms helper
- the mode_set has been moved to atomic_enable()
- debug prints are converted to dev_debg()
For now the bridge attach flags is 0, DRM_BRIDGE_ATTACH_NO_CONNECTOR
will be handled later.
The meson dw-hdmi glue is slightly fixed to live without the
encoder in the same driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed warning because missing meson_encoder_hdmi.h include]
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-4-narmstrong@baylibre.com
Neil Armstrong [Wed, 20 Oct 2021 12:39:43 +0000 (14:39 +0200)]
drm/meson: remove useless recursive components matching
The initial design was recursive to cover all port/endpoints, but only the first layer
of endpoints should be covered by the components list.
This also breaks the MIPI-DSI init/bridge attach sequence, thus only parse the
first endpoints instead of recursing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-3-narmstrong@baylibre.com
Neil Armstrong [Wed, 20 Oct 2021 12:39:42 +0000 (14:39 +0200)]
drm/bridge: display-connector: implement bus fmts callbacks
Since this bridge is tied to the connector, it acts like a passthrough,
so concerning the output & input bus formats, either pass the bus formats from the
previous bridge or return fallback data like done in the bridge function:
drm_atomic_bridge_chain_select_bus_fmts() & select_bus_fmt_recursive.
This permits avoiding skipping the negociation if the remaining bridge chain has
all the bits in place.
Without this bus fmt negociation breaks on drm/meson HDMI pipeline when attaching
dw-hdmi with DRM_BRIDGE_ATTACH_NO_CONNECTOR, because the last bridge of the
display-connector doesn't implement buf fmt callbacks and MEDIA_BUS_FMT_FIXED
is used leading to select an unsupported default bus format from dw-hdmi.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-2-narmstrong@baylibre.com
Neil Armstrong [Fri, 29 Oct 2021 13:59:47 +0000 (15:59 +0200)]
drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTOR
The current ELD handling takes the internal connector ELD buffer and
shares it to the I2S and AHB sub-driver.
But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created
elsewhere (or not), and an eventual connector is known only
if the bridge chain up to a connector is enabled.
The current dw-hdmi code gets the current connector from
atomic_enable() so use the already stored connector pointer and
replace the buffer pointer with a callback returning the current
connector ELD buffer.
Since a connector is not always available, either pass an empty
ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld()
in AHB driver.
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed typo in commit log]
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029135947.3022875-1-narmstrong@baylibre.com
Philip Chen [Thu, 28 Oct 2021 17:58:11 +0000 (10:58 -0700)]
drm/bridge: parade-ps8640: Populate devices on aux-bus
Conventionally, panel is listed under the root of the device tree.
When userland asks for display mode, ps8640 bridge is responsible
for returning EDID when ps8640_bridge_get_edid() is called.
Now enable a new option of listing panel under "aux-bus" of ps8640
bridge node in the device tree. In this case, panel driver can retrieve
EDID by triggering AUX transactions, without ps8640_bridge_get_edid()
calls at all.
To prevent the "old" and "new" options from interfering with each
other's logic flow, disable DRM_BRIDGE_OP_EDID when the new option
is taken.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028105754.v5.2.I09899dea340f11feab97d719cb4b62bef3179e4b@changeid
Philip Chen [Thu, 28 Oct 2021 17:58:10 +0000 (10:58 -0700)]
drm/bridge: parade-ps8640: Enable runtime power management
Fit ps8640 driver into runtime power management framework:
First, break _poweron() to 3 parts: (1) turn on power and wait for
ps8640's internal MCU to finish init (2) check panel HPD (which is
proxied by GPIO9) (3) the other configs. As runtime_resume() can be
called before panel is powered, we only add (1) to _resume() and leave
(2)(3) to _pre_enable(). We also add (2) to _aux_transfer() as we want
to ensure panel HPD is asserted before we start AUX CH transactions.
Second, the original driver has a mysterious delay of 50 ms between (2)
and (3). Since Parade's support can't explain what the delay is for,
and we don't see removing the delay break any boards at hand, remove
the delay to fit into this driver change.
In addition, rename "powered" to "pre_enabled" and don't check for it
in the pm_runtime calls. The pm_runtime calls are already refcounted
so there's no reason to check there. The other user of "powered",
_get_edid(), only cares if pre_enable() has already been called.
Lastly, change some existing DRM_...() logging to dev_...() along the
way, since DRM_...() seem to be deprecated in [1].
[1] https://patchwork.freedesktop.org/patch/454760/
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed whitespace warning reported by dim tool]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028105754.v5.1.I828f5db745535fb7e36e8ffdd62d546f6d08b6d1@changeid
Thomas Zimmermann [Wed, 10 Nov 2021 10:37:02 +0000 (11:37 +0100)]
drm: Clarify semantics of struct drm_mode_config.{min, max}_{width, height}
Add additional information on the semantics of the size fields in
struct drm_mode_config. Also add a TODO to review all driver for
correct usage of these fields.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-10-tzimmermann@suse.de
Thomas Zimmermann [Wed, 10 Nov 2021 10:37:01 +0000 (11:37 +0100)]
drm/simpledrm: Support virtual screen sizes
Add constants for the maximum size of the shadow-plane surface
size. Useful for shadow planes with virtual screen sizes. The
current sizes are 4096 scanlines with 4096 pixels each. This
seems reasonable for current hardware, but can be increased as
necessary.
In simpledrm, set the maximum framebuffer size from the constants
for shadow planes. Implements support for virtual screen sizes and
page flipping on the fbdev console.
v3:
* use decimal numbers for shadow-plane constants (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-9-tzimmermann@suse.de
Thomas Zimmermann [Wed, 10 Nov 2021 10:37:00 +0000 (11:37 +0100)]
drm/simpledrm: Enable FB_DAMAGE_CLIPS property
Enable the FB_DAMAGE_CLIPS property to reduce display-update
overhead. Also fixes a warning in the kernel log.
simple-framebuffer simple-framebuffer.0: [drm] drm_plane_enable_fb_damage_clips() not called
Fix the computation of the blit rectangle. This wasn't an issue so
far, as simpledrm always blitted the full framebuffer. The code now
supports damage clipping and virtual screen sizes.
v3:
* fix drm_dev_enter() error path (Noralf)
* remove unnecessary clipping from update function (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-8-tzimmermann@suse.de
Thomas Zimmermann [Wed, 10 Nov 2021 10:36:59 +0000 (11:36 +0100)]
drm/fb-helper: Allocate shadow buffer of surface height
Allocating a shadow buffer of the height of the buffer object does
not support fbdev overallocation. Use surface height instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-7-tzimmermann@suse.de
Thomas Zimmermann [Wed, 10 Nov 2021 10:36:58 +0000 (11:36 +0100)]
drm/format-helper: Streamline blit-helper interface
Move destination-buffer clipping from format-helper blit function into
caller. Rename drm_fb_blit_rect_dstclip() to drm_fb_blit_toio(). Done for
consistency with the rest of the interface. Remove drm_fb_blit_dstclip(),
which isn't required.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-6-tzimmermann@suse.de
Thomas Zimmermann [Wed, 10 Nov 2021 10:36:57 +0000 (11:36 +0100)]
drm/format-helper: Rework format-helper conversion functions
Move destination-buffer clipping from all format-helper conversion
functions into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Simply harmonize the interface and semantics of the existing code.
Not all conversion helpers support all combinations of parameters.
We have to add additional features when we need them.
v2:
* fix default destination pitch in drm_fb_xrgb8888_to_gray8()
(Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-5-tzimmermann@suse.de
Thomas Zimmermann [Wed, 10 Nov 2021 10:36:56 +0000 (11:36 +0100)]
drm/format-helper: Add destination-buffer pitch to drm_fb_swab()
Add destination-buffer pitch as argument to drm_fb_swab(). Done for
consistency with the rest of the interface.
v2:
* update documentation (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-4-tzimmermann@suse.de
Thomas Zimmermann [Wed, 10 Nov 2021 10:36:55 +0000 (11:36 +0100)]
drm/format-helper: Rework format-helper memcpy functions
Move destination-buffer clipping from all format-helper memcpy
function into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-3-tzimmermann@suse.de
Thomas Zimmermann [Wed, 10 Nov 2021 10:36:54 +0000 (11:36 +0100)]
drm/format-helper: Export drm_fb_clip_offset()
Provide a function that computes the offset into a blit destination
buffer. This will allow to move destination-buffer clipping into the
format-helper callers.
v4:
* add missing '@' for parameter documentation
* fix typo 'frambuffer'
v2:
* provide documentation (Sam)
* return 'unsigned int' (Sam, Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-2-tzimmermann@suse.de
Thomas Zimmermann [Mon, 8 Nov 2021 10:28:46 +0000 (11:28 +0100)]
drm: Update documentation and TODO of gem_prime_mmap hook
The hook gem_prime_mmap in struct drm_driver is deprecated. Document
the new requirements.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108102846.309-4-tzimmermann@suse.de
Thomas Zimmermann [Mon, 8 Nov 2021 10:28:45 +0000 (11:28 +0100)]
drm/xen: Implement mmap as GEM object function
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective xen functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108102846.309-3-tzimmermann@suse.de
Christian König [Fri, 24 Sep 2021 06:54:57 +0000 (08:54 +0200)]
drm/etnaviv: use dma_resv_describe
Instead of dumping the fence info manually.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103081231.18578-4-christian.koenig@amd.com
Christian König [Thu, 23 Sep 2021 13:02:37 +0000 (15:02 +0200)]
drm/msm: use the new dma_resv_describe
Instead of hand rolling pretty much the same code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103081231.18578-3-christian.koenig@amd.com
Christian König [Thu, 23 Sep 2021 11:57:42 +0000 (13:57 +0200)]
dma-buf: add dma_fence_describe and dma_resv_describe v2
Add functions to dump dma_fence and dma_resv objects into a seq_file and
use them for printing the debugfs information.
v2: fix missing include reported by test robot.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103081231.18578-2-christian.koenig@amd.com
xinhui pan [Wed, 10 Nov 2021 04:31:48 +0000 (12:31 +0800)]
drm/ttm: Put BO in its memory manager's lru list
After we move BO to a new memory region, we should put it to
the new memory manager's lru list regardless we unlock the resv or not.
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110043149.57554-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Cai Huoqing [Tue, 7 Sep 2021 03:35:26 +0000 (11:35 +0800)]
drm/tidss: Make use of the helper macro SET_RUNTIME_PM_OPS()
Use the helper macro SET_RUNTIME_PM_OPS() instead of the verbose
operators ".runtime_suspend/.runtime_resume", because the
SET_RUNTIME_PM_OPS() is a nice helper macro that could be brought
in to make code a little more concise.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907033526.1612-1-caihuoqing@baidu.com
Tomi Valkeinen [Tue, 12 Oct 2021 13:39:39 +0000 (15:39 +0200)]
drm/omap: increase DSS5 max tv pclk to 192MHz
DSS5's maximum tv pclk rate (i.e. HDMI) is set to 186MHz, which comes
from the TRM (DPLL_HDMI_CLK1 frequency must be lower than 186 MHz). To
support DRA76's wide screen HDMI feature, we need to increase this
maximum rate.
Testing shows that the PLL seems to work fine even with ~240MHz clocks,
and even the HDMI output at that clock is stable enough for monitors to
show a picture. This holds true for all DRA7 and AM5 SoCs (and probably
also for OMAP5).
However, the highest we can go without big refactoring to the clocking
code is 192MHz, as that is the DSS func clock we get from the PRCM. So,
increase the max HDMI pixel clock to 192MHz for now, to allow some more
2k+ modes to work.
This patch never had a clear confirmation from HW people, but this
change stayed on production trees for multiple years without any report
on an eventual breakage.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012133939.2145462-1-narmstrong@baylibre.com
Cai Huoqing [Tue, 31 Aug 2021 13:57:06 +0000 (21:57 +0800)]
drm/omap: Make use of the helper function devm_platform_ioremap_resourcexxx()
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135707.4676-1-caihuoqing@baidu.com
Cai Huoqing [Sat, 28 Aug 2021 08:48:11 +0000 (16:48 +0800)]
drm/omap: dss: Make use of the helper macro SET_RUNTIME_PM_OPS()
Use the helper macro SET_RUNTIME_PM_OPS() instead of the verbose
operators ".runtime_suspend/.runtime_resume", because the
SET_RUNTIME_PM_OPS() is a nice helper macro that could be brought
in to make code a little clearer, a little more concise.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210828084811.104-1-caihuoqing@baidu.com
Cai Huoqing [Sun, 22 Aug 2021 07:23:23 +0000 (15:23 +0800)]
drm/omapdrm: Convert to SPDX identifier
use SPDX-License-Identifier instead of a verbose license text
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210822072323.408-1-caihuoqing@baidu.com
Qiang Yu [Sun, 31 Oct 2021 04:16:04 +0000 (12:16 +0800)]
drm/lima: fix warning when CONFIG_DEBUG_SG=y & CONFIG_DMA_API_DEBUG=y
Otherwise get following warning:
DMA-API: lima
1c40000.gpu: mapping sg segment longer than device claims to support [len=
4149248] [max=65536]
See: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5496
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211031041604.187216-1-yuq825@gmail.com
Maxime Ripard [Mon, 25 Oct 2021 14:11:13 +0000 (16:11 +0200)]
drm/vc4: hdmi: Introduce a scdc_enabled flag
We currently rely on two functions, vc4_hdmi_supports_scrambling() and
vc4_hdmi_mode_needs_scrambling() to determine if we should enable and
disable the scrambler for any given mode.
Since we might need to disable the controller at boot, we also always
run vc4_hdmi_disable_scrambling() and thus call those functions without
a mode yet, which in turns need to make some special casing in order for
it to work.
Instead of duplicating the check for whether or not we need to take care
of the scrambler in both vc4_hdmi_enable_scrambling() and
vc4_hdmi_disable_scrambling(), we can do that check only when we enable
it and store whether or not it's been enabled in our private structure.
We also need to initialize that flag at true to make sure we disable the
scrambler at boot since we can't really know its state yet.
This allows to simplify a bit that part of the driver, and removes one
user of our copy of the CRTC adjusted mode outside of KMS (since
vc4_hdmi_disable_scrambling() might be called from the hotplug interrupt
handler).
It also removes our last user of the legacy encoder->crtc pointer.
Link: https://lore.kernel.org/r/20211025141113.702757-10-maxime@cerno.tech
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:12 +0000 (16:11 +0200)]
drm/vc4: hdmi: Introduce an output_enabled flag
We currently poke at encoder->crtc in the ALSA code path to determine
whether the HDMI output is enabled or not, and thus whether we should
allow the audio output.
However, that pointer is deprecated and shouldn't really be used by
atomic drivers anymore. Since we have the infrastructure in place now,
let's just create a flag that we toggle to report whether the controller
is currently enabled and use that instead of encoder->crtc in ALSA.
Link: https://lore.kernel.org/r/20211025141113.702757-9-maxime@cerno.tech
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:11 +0000 (16:11 +0200)]
drm/vc4: hdmi: Check the device state in prepare()
Even though we already check that the encoder->crtc pointer is there
during in startup(), which is part of the open() path in ASoC, nothing
guarantees that our encoder state won't change between the time when we
open the device and the time we prepare it.
Move the sanity checks we do in startup() to a helper and call it from
prepare().
Link: https://lore.kernel.org/r/20211025141113.702757-8-maxime@cerno.tech
Fixes:
91e99e113929 ("drm/vc4: hdmi: Register HDMI codec")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:10 +0000 (16:11 +0200)]
drm/vc4: hdmi: Prevent access to crtc->state outside of KMS
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
However, in the vc4 HDMI driver we do use that pointer in the ALSA code
path, and potentially in the hotplug interrupt handler path.
These paths both need access to the CRTC adjusted mode in order for the
proper dividers to be set for ALSA, and the scrambler state to be
reinstated properly for hotplug.
Let's copy this mode into our private encoder structure and reference it
from there when needed. Since that part is shared between KMS and other
paths, we need to protect it using our mutex.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-7-maxime@cerno.tech
Fixes:
bb7d78568814 ("drm/vc4: Add HDMI audio support")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:09 +0000 (16:11 +0200)]
drm/vc4: hdmi: Use a mutex to prevent concurrent framework access
The vc4 HDMI controller registers into the KMS, CEC and ALSA
frameworks.
However, no particular care is done to prevent the concurrent execution
of different framework hooks from happening at the same time.
In order to protect against that scenario, let's introduce a mutex that
relevant ALSA and KMS hooks will need to take to prevent concurrent
execution.
CEC is left out at the moment though, since the .get_modes and .detect
KMS hooks, when running cec_s_phys_addr_from_edid, can end up calling
CEC's .adap_enable hook. This introduces some reentrancy that isn't easy
to deal with properly.
The CEC hooks also don't share much state with the rest of the driver:
the registers are entirely separate, we don't share any variable, the
only thing that can conflict is the CEC clock divider setup that can be
affected by a mode set.
However, after discussing it, it looks like CEC should be able to
recover from this if it was to happen.
Link: https://lore.kernel.org/r/20211025141113.702757-6-maxime@cerno.tech
Fixes:
bb7d78568814 ("drm/vc4: Add HDMI audio support")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:08 +0000 (16:11 +0200)]
drm/vc4: hdmi: Add a spinlock to protect register access
The vc4 HDMI driver has multiple path shared between the CEC, ALSA and
KMS frameworks, plus two interrupt handlers (CEC and hotplug) that will
read and modify a number of registers.
Even though not bug has been reported so far, it's definitely unsafe, so
let's just add a spinlock to protect the register access of the HDMI
controller.
Link: https://lore.kernel.org/r/20211025141113.702757-5-maxime@cerno.tech
Fixes:
c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:07 +0000 (16:11 +0200)]
drm/vc4: crtc: Copy assigned channel to the CRTC
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
In VC4, a number of users of that pointers have crept in over the years,
and the previous commits removed them all but the HVS channel a CRTC has
been assigned.
Let's move this channel in struct vc4_crtc at atomic_begin() time, drop
it from our private state structure, and remove our use of crtc->state
from our vblank handler entirely.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-4-maxime@cerno.tech
Fixes:
87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:06 +0000 (16:11 +0200)]
drm/vc4: Fix non-blocking commit getting stuck forever
In some situation, we can end up being stuck on a non-blocking that went
through properly.
The situation that seems to trigger it reliably is to first start a
non-blocking commit, and then right after, and before we had any vblank
interrupt), start a blocking commit.
This will lead to the first commit workqueue to be scheduled, setup the
display, while the second commit is waiting for the first one to be
completed.
The vblank interrupt will then be raised, vc4_crtc_handle_vblank() will
run and will compare the active dlist in the HVS channel to the one
associated with the crtc->state.
However, at that point, the second commit is waiting using
drm_atomic_helper_wait_for_dependencies that occurs after
drm_atomic_helper_swap_state has been called, so crtc->state points to
the second commit state. vc4_crtc_handle_vblank() will compare the two
dlist addresses and since they don't match will ignore the interrupt.
The vblank event will never be reported, and the first and second commit
will wait for the first commit completion until they timeout.
The underlying reason is that it was never safe to do so. Indeed,
accessing the ->state pointer access synchronization is based on
ownership guarantees that can only occur within the functions and hooks
defined as part of the KMS framework, and obviously the irq handler
isn't one of them. The rework to move to generic helpers only uncovered
the underlying issue.
However, since the code path between
drm_atomic_helper_wait_for_dependencies() and
drm_atomic_helper_wait_for_vblanks() is serialised and we can't get two
commits in that path at the same time, we can work around this issue by
setting a variable associated to struct drm_crtc to the dlist we expect,
and then using it from the vc4_crtc_handle_vblank() function.
Since that state is shared with the modesetting path, we also need to
introduce a spinlock to protect the code shared between the interrupt
handler and the modesetting path, protecting only our new variable for
now.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-3-maxime@cerno.tech
Fixes:
56d1fe0979dc ("drm/vc4: Make pageflip completion handling more robust.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Maxime Ripard [Mon, 25 Oct 2021 14:11:05 +0000 (16:11 +0200)]
drm/vc4: crtc: Drop feed_txp from state
Accessing the crtc->state pointer from outside the modesetting context
is not allowed. We thus need to copy whatever we need from the KMS state
to our structure in order to access it.
In VC4, a number of users of that pointers have crept in over the years,
the first one being whether or not the downstream controller of the
pixelvalve is our writeback controller.
Fortunately for us, Since commit
39fcb2808376 ("drm/vc4: txp: Turn the
TXP into a CRTC of its own") this is no longer something that can change
from one commit to the other and is hardcoded.
Let's set this flag in struct vc4_crtc if we happen to be the TXP, and
drop the flag from our private state structure.
Link: https://lore.kernel.org/all/YWgteNaNeaS9uWDe@phenom.ffwll.local/
Link: https://lore.kernel.org/r/20211025141113.702757-2-maxime@cerno.tech
Fixes:
008095e065a8 ("drm/vc4: Add support for the transposer block")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Brian Norris [Wed, 3 Nov 2021 20:52:00 +0000 (13:52 -0700)]
drm/bridge: analogix_dp: Make PSR-exit block less
Prior to commit
6c836d965bad ("drm/rockchip: Use the helpers for PSR"),
"PSR exit" used non-blocking analogix_dp_send_psr_spd(). The refactor
started using the blocking variant, for a variety of reasons -- quoting
Sean Paul's potentially-faulty memory:
"""
- To avoid racing a subsequent PSR entry (if exit takes a long time)
- To avoid racing disable/modeset
- We're not displaying new content while exiting PSR anyways, so there
is minimal utility in allowing frames to be submitted
- We're lying to userspace telling them frames are on the screen when
we're just dropping them on the floor
"""
However, I'm finding that this blocking transition is causing upwards of
60+ ms of unneeded latency on PSR-exit, to the point that initial cursor
movements when leaving PSR are unbearably jumpy.
It turns out that we need to meet in the middle somewhere: Sean is right
that we were "lying to userspace" with a non-blocking PSR-exit, but the
new blocking behavior is also waiting too long:
According to the eDP specification, the sink device must support PSR
entry transitions from both state 4 (ACTIVE_RESYNC) and state 0
(INACTIVE). It also states that in ACTIVE_RESYNC, "the Sink device must
display the incoming active frames from the Source device with no
visible glitches and/or artifacts."
Thus, for our purposes, we only need to wait for ACTIVE_RESYNC before
moving on; we are ready to display video, and subsequent PSR-entry is
safe.
Tested on a Samsung Chromebook Plus (i.e., Rockchip RK3399 Gru Kevin),
where this saves about 60ms of latency, for PSR-exit that used to
take about 80ms.
Fixes:
6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Cc: <stable@vger.kernel.org>
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103135112.v3.1.I67612ea073c3306c71b46a87be894f79707082df@changeid
Xin Ji [Thu, 4 Nov 2021 03:38:57 +0000 (11:38 +0800)]
drm/bridge: anx7625: add HDMI audio function
Add audio HDMI codec function support, enable it through device true
flag "analogix,audio-enable".
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104033857.2634562-1-xji@analogixsemi.com
Xin Ji [Thu, 4 Nov 2021 03:36:39 +0000 (11:36 +0800)]
drm/bridge: anx7625: add MIPI DPI input feature
The basic anx7625 driver only support MIPI DSI rx signal input.
This patch add MIPI DPI rx input configuration support, after apply
this patch, the driver can support DSI rx or DPI rx by adding
'bus-type' in DT.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104033639.2634502-1-xji@analogixsemi.com
Xin Ji [Thu, 4 Nov 2021 03:36:09 +0000 (11:36 +0800)]
drm/bridge: anx7625: fix not correct return value
At some time, the original code may return non zero value, force return 0
if operation finished.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104033609.2634452-1-xji@analogixsemi.com
Xin Ji [Thu, 4 Nov 2021 03:34:44 +0000 (11:34 +0800)]
dt-bindings:drm/bridge:anx7625:add vendor define
Add 'bus-type' and 'data-lanes' define for port0. Add DP tx lane0,
lane1 swing register setting array, and audio enable flag.
The device which cannot pass DP tx PHY CTS caused by long PCB trace or
embedded MUX, adjusting ANX7625 PHY parameters can pass the CTS test. The
adjusting type include Pre-emphasis, Vp-p, Rterm(Resistor Termination)
and Rsel(Driven Strength). Each lane has maximum 20 registers for
these settings.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104033444.2634397-1-xji@analogixsemi.com
Maxime Ripard [Mon, 25 Oct 2021 15:29:03 +0000 (17:29 +0200)]
drm/vc4: Increase the core clock based on HVS load
Depending on a given HVS output (HVS to PixelValves) and input (planes
attached to a channel) load, the HVS needs for the core clock to be
raised above its boot time default.
Failing to do so will result in a vblank timeout and a stalled display
pipeline.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-11-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:29:02 +0000 (17:29 +0200)]
drm/vc4: hdmi: Enable the scrambler on reconnection
If we have a state already and disconnect/reconnect the display, the
SCDC messages won't be sent again since we didn't go through a disable /
enable cycle.
In order to fix this, let's call the vc4_hdmi_enable_scrambling function
in the detect callback if there is a mode and it needs the scrambler to
be enabled.
Fixes:
c85695a2016e ("drm/vc4: hdmi: Enable the scrambler")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-10-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:29:01 +0000 (17:29 +0200)]
drm/vc4: hdmi: Raise the maximum clock rate
Now that we have the infrastructure in place, we can raise the maximum
pixel rate we can reach for HDMI0 on the BCM2711.
HDMI1 is left untouched since its pixelvalve has a smaller FIFO and
would need a clock faster than what we can provide to support the same
modes.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211025152903.1088803-9-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:29:00 +0000 (17:29 +0200)]
drm/vc4: Leverage the load tracker on the BCM2711
The load tracker was initially designed to report and warn about a load
too high for the HVS. To do so, it computes for each plane the impact
it's going to have on the HVS, and will warn (if it's enabled) if we go
over what the hardware can process.
While the limits being used are a bit irrelevant to the BCM2711, the
algorithm to compute the HVS load will be one component used in order to
compute the core clock rate on the BCM2711.
Let's remove the hooks to prevent the load tracker to do its
computation, but since we don't have the same limits, don't check them
against them, and prevent the debugfs file to enable it from being
created.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-8-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:59 +0000 (17:28 +0200)]
drm/vc4: crtc: Add some logging
The encoder retrieval code has been a source of bugs and glitches in the
past and the crtc <-> encoder association been wrong in a number of
different ways.
Add some logging to quickly spot issues if they occur.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-7-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:58 +0000 (17:28 +0200)]
drm/vc4: crtc: Rework the encoder retrieval code (again)
It turns out the encoder retrieval code, in addition to being
unnecessarily complicated, has a bug when only the planes and crtcs are
affected by a given atomic commit.
Indeed, in such a case, either drm_atomic_get_old_connector_state or
drm_atomic_get_new_connector_state will return NULL and thus our encoder
retrieval code will not match on anything.
We can however simplify the code by using drm_for_each_encoder_mask, the
drm_crtc_state storing the encoders a given CRTC is connected to
directly and without relying on any other state.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-6-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:57 +0000 (17:28 +0200)]
drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype
vc4_crtc_config_pv() retrieves the encoder again, even though its only
caller, vc4_crtc_atomic_enable(), already did.
Pass the encoder pointer as an argument instead of going through all the
connectors to retrieve it again.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-5-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:56 +0000 (17:28 +0200)]
drm/vc4: Make vc4_crtc_get_encoder public
We'll need that function in vc4_kms to compute the core clock rate
requirements.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-4-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:55 +0000 (17:28 +0200)]
drm/vc4: hdmi: Fix HPD GPIO detection
Prior to commit
6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod"), in the
detect hook, if we had an HPD GPIO we would only rely on it and return
whatever state it was in.
However, that commit changed that by mistake to only consider the case
where we have a GPIO and it returns a logical high, and would fall back
to the other methods otherwise.
Since we can read the EDIDs when the HPD signal is low on some displays,
we changed the detection status from disconnected to connected, and we
would ignore an HPD pulse.
Fixes:
6800234ceee0 ("drm/vc4: hdmi: Convert to gpiod")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-3-maxime@cerno.tech
Maxime Ripard [Mon, 25 Oct 2021 15:28:54 +0000 (17:28 +0200)]
drm/vc4: hdmi: Remove the DDC probing for status detection
Commit
9d44abbbb8d5 ("drm/vc4: Fall back to using an EDID probe in the
absence of a GPIO.") added some code to read the EDID through DDC in the
HDMI driver detect hook since the Pi3 had no HPD GPIO back then.
However, commit
b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of
Expander") changed that a couple of years later.
This causes an issue though since some TV (like the LG 55C8) when it
comes out of standy will deassert the HPD line, but the EDID will
remain readable.
It causes an issues nn platforms without an HPD GPIO, like the Pi4,
where the DDC probing will be our primary mean to detect a display, and
thus we will never detect the HPD pulse. This was fine before since the
pulse was small enough that we would never detect it, and we also didn't
have anything (like the scrambler) that needed to be set up in the
display.
However, now that we have both, the display during the HPD pulse will
clear its scrambler status, and since we won't detect the
disconnect/reconnect cycle we will never enable the scrambler back.
As our main reason for that DDC probing is gone, let's just remove it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20211025152903.1088803-2-maxime@cerno.tech
Christian König [Wed, 27 Oct 2021 11:30:40 +0000 (13:30 +0200)]
drm/radeon: use dma_resv_wait_timeout() instead of manually waiting
Don't touch the exclusive fence manually here, but rather use the
general dma_resv function. We did that for better hw reset handling but
this doesn't necessary work correctly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deuche <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028132630.2330-6-christian.koenig@amd.com
Christian König [Wed, 22 Sep 2021 12:16:25 +0000 (14:16 +0200)]
drm/etnaviv: stop getting the excl fence separately here
Just grab all fences in one go.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028132630.2330-3-christian.koenig@amd.com
Simon Ser [Mon, 18 Oct 2021 08:47:31 +0000 (08:47 +0000)]
i915/display/dp: send a more fine-grained link-status uevent
When link-status changes, send a hotplug uevent which contains the
connector ID. That way, user-space can more easily figure out that
only this connector has been updated.
Changes in v4: avoid sending two uevents (Ville)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-7-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:30 +0000 (08:47 +0000)]
drm/probe-helper: use drm_kms_helper_connector_hotplug_event
If an hotplug event only updates a single connector, use
drm_kms_helper_connector_hotplug_event instead of
drm_kms_helper_hotplug_event.
Changes in v4:
- Simplify loop logic (Ville, Sam)
- Update drm_connector_helper_hpd_irq_event (Maxime)
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-6-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:28 +0000 (08:47 +0000)]
amdgpu: use drm_kms_helper_connector_hotplug_event
When updating a single connector, use
drm_kms_helper_connector_hotplug_event instead of
drm_kms_helper_hotplug_event.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-5-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:27 +0000 (08:47 +0000)]
drm/connector: use drm_sysfs_connector_hotplug_event
In drm_connector_register, use drm_sysfs_connector_hotplug_event
instead of drm_sysfs_hotplug_event, because the hotplug event
only updates a single connector.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-4-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:26 +0000 (08:47 +0000)]
drm/probe-helper: add drm_kms_helper_connector_hotplug_event
This function is the same as drm_kms_helper_hotplug_event, but takes
a connector instead of a device.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-3-contact@emersion.fr
Simon Ser [Mon, 18 Oct 2021 08:47:25 +0000 (08:47 +0000)]
drm/sysfs: introduce drm_sysfs_connector_hotplug_event
This function sends a hotplug uevent with a CONNECTOR property.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018084707.32253-2-contact@emersion.fr
Andrey Grodzovsky [Thu, 28 Oct 2021 16:24:03 +0000 (12:24 -0400)]
drm/sched: Avoid lockdep spalt on killing a processes
Probelm:
Singlaning one sched fence from within another's sched
fence singal callback generates lockdep splat because
the both have same lockdep class of their fence->lock
Fix:
Fix bellow stack by rescheduling to irq work of
signaling and killing of jobs that left when entity is killed.
[11176.741181] dump_stack+0x10/0x12
[11176.741186] __lock_acquire.cold+0x208/0x2df
[11176.741197] lock_acquire+0xc6/0x2d0
[11176.741204] ? dma_fence_signal+0x28/0x80
[11176.741212] _raw_spin_lock_irqsave+0x4d/0x70
[11176.741219] ? dma_fence_signal+0x28/0x80
[11176.741225] dma_fence_signal+0x28/0x80
[11176.741230] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[11176.741240] drm_sched_entity_kill_jobs_cb+0x1c/0x50 [gpu_sched]
[11176.741248] dma_fence_signal_timestamp_locked+0xac/0x1a0
[11176.741254] dma_fence_signal+0x3b/0x80
[11176.741260] drm_sched_fence_finished+0x12/0x20 [gpu_sched]
[11176.741268] drm_sched_job_done.isra.0+0x7f/0x1a0 [gpu_sched]
[11176.741277] drm_sched_job_done_cb+0x12/0x20 [gpu_sched]
[11176.741284] dma_fence_signal_timestamp_locked+0xac/0x1a0
[11176.741290] dma_fence_signal+0x3b/0x80
[11176.741296] amdgpu_fence_process+0xd1/0x140 [amdgpu]
[11176.741504] sdma_v4_0_process_trap_irq+0x8c/0xb0 [amdgpu]
[11176.741731] amdgpu_irq_dispatch+0xce/0x250 [amdgpu]
[11176.741954] amdgpu_ih_process+0x81/0x100 [amdgpu]
[11176.742174] amdgpu_irq_handler+0x26/0xa0 [amdgpu]
[11176.742393] __handle_irq_event_percpu+0x4f/0x2c0
[11176.742402] handle_irq_event_percpu+0x33/0x80
[11176.742408] handle_irq_event+0x39/0x60
[11176.742414] handle_edge_irq+0x93/0x1d0
[11176.742419] __common_interrupt+0x50/0xe0
[11176.742426] common_interrupt+0x80/0x90
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Christian König <christian.koenig@amd.com>
Tested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/dri-devel/msg321250.html
Paul Cercueil [Sat, 30 Oct 2021 10:00:32 +0000 (11:00 +0100)]
drm/ingenic: Remove bogus register write
Commit
1bdb542da736 ("drm/ingenic: Simplify code by using hwdescs
array") caused the dma_hwdesc_phys_f{0,1} variables to be used while
uninitialized in a mmio register write, which most certainly broke the
ingenic-drm driver.
However, the very same patchset also submitted commit
6055466203df
("drm/ingenic: Upload palette before frame"), which restored a correct
behaviour by doing the register writes in a different place in the code.
What's left of this, is just to remove the bogus register writes in the
probe function.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211030100032.42066-1-paul@crapouillou.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Paul Cercueil [Tue, 26 Oct 2021 18:12:40 +0000 (19:12 +0100)]
drm/ingenic: Attach bridge chain to encoders
Attach a top-level bridge to each encoder, which will be used for
negociating the bus format and flags.
All the bridges are now attached with DRM_BRIDGE_ATTACH_NO_CONNECTOR.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-7-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:39 +0000 (19:12 +0100)]
drm/ingenic: Upload palette before frame
When using C8 color mode, make sure that the palette is always uploaded
before a frame; otherwise the very first frame will have wrong colors.
Do that by changing the link order of the DMA descriptors.
v3: Fix ingenic_drm_get_new_priv_state() called instead of
ingenic_drm_get_priv_state()
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-6-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:38 +0000 (19:12 +0100)]
drm/ingenic: Set DMA descriptor chain register when starting CRTC
Setting the DMA descriptor chain register in the probe function has been
fine until now, because we only ever had one descriptor per foreground.
As the driver will soon have real descriptor chains, and the DMA
descriptor chain register updates itself to point to the current
descriptor being processed, this register needs to be reset after a full
modeset to point to the first descriptor of the chain.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-5-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:37 +0000 (19:12 +0100)]
drm/ingenic: Move IPU scale settings to private state
The IPU scaling information is computed in the plane's ".atomic_check"
callback, and used in the ".atomic_update" callback. As such, it is
state-specific, and should be moved to a private state structure.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-4-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:36 +0000 (19:12 +0100)]
drm/ingenic: Add support for private objects
Until now, the ingenic-drm as well as the ingenic-ipu drivers used to
put state-specific information in their respective private structure.
Add boilerplate code to support private objects in the two drivers, so
that state-specific information can be put in the state-specific private
structure.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-3-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Paul Cercueil [Tue, 26 Oct 2021 18:12:35 +0000 (19:12 +0100)]
drm/ingenic: Simplify code by using hwdescs array
Instead of having one 'hwdesc' variable for the plane #0, one for the
plane #1 and one for the palette, use a 'hwdesc[3]' array, where the
DMA hardware descriptors are indexed by the plane's number.
v2: dma_hwdesc_addr() extended to support palette hwdesc. The palette
hwdesc is now hwdesc[3] to simplify things. Add
ingenic_drm_configure_hwdesc*() functions to factorize code.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20211026181240.213806-2-paul@crapouillou.net
Tested-by: Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Christophe Branchereau <cbranchereau@gmail.com>
Marcel Ziswiler [Wed, 27 Oct 2021 21:25:05 +0000 (23:25 +0200)]
drm: import DMA_BUF module namespace
Today's -next fails building arm64 defconfig as follows:
ERROR: modpost: module drm_cma_helper uses symbol dma_buf_vunmap from
namespace DMA_BUF, but does not import it.
ERROR: modpost: module drm_cma_helper uses symbol dma_buf_vmap from
namespace DMA_BUF, but does not import it.
Fix this by importing DMA_BUF namespace into drm_cma_helper.ko. Also
fix the problem with drm_shmem_helper.ko.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes:
4b2b5e142ff4 ("drm: Move GEM memory managers into modules")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027212506.3418521-1-marcel@ziswiler.com
Christian König [Mon, 13 Sep 2021 12:08:13 +0000 (14:08 +0200)]
drm/nouveau: use the new interator in nv50_wndw_prepare_fb
Makes the handling a bit more complex, but avoids the use of
dma_resv_get_excl_unlocked().
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005113742.1101-27-christian.koenig@amd.com
Colin Ian King [Thu, 30 Sep 2021 10:27:48 +0000 (11:27 +0100)]
drm/virtio: fix another potential integer overflow on shift of a int
The left shift of unsigned int 32 bit integer constant 1 is evaluated
using 32 bit arithmetic and then assigned to a signed 64 bit integer.
In the case where value is 32 or more this can lead to an overflow
(value can be in range 0..MAX_CAPSET_ID (63). Fix this by shifting
the value 1ULL instead.
Addresses-Coverity: ("Uninitentional integer overflow")
Fixes:
4fb530e5caf7 ("drm/virtio: implement context init: support init ioctl")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210930102748.16922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Colin Ian King [Thu, 30 Sep 2021 10:19:41 +0000 (11:19 +0100)]
drm/virtio: fix potential integer overflow on shift of a int
The left shift of unsigned int 32 bit integer constant 1 is evaluated
using 32 bit arithmetic and then assigned to a signed 64 bit integer.
In the case where i is 32 or more this can lead to an overflow. Fix
this by shifting the value 1ULL instead.
Addresses-Coverity: ("Uninitentional integer overflow")
Fixes:
8d6b006e1f51 ("drm/virtio: implement context init: handle VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210930101941.16546-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Chia-I Wu [Thu, 28 Oct 2021 21:34:46 +0000 (14:34 -0700)]
MAINTAINERS: add reviewers for virtio-gpu
Add Gurchetan Singh and me as reviewers for virtio-gpu.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211028213446.955338-1-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Bjorn Andersson [Thu, 28 Oct 2021 16:35:48 +0000 (09:35 -0700)]
drm/bridge: sn65dsi86: ti_sn65dsi86_read_u16() __maybe_unused
When built without CONFIG_PWM there are no references to
ti_sn65dsi86_read_u16(), avoid the W=1 build warning by marking the
function as __maybe_unused.
__maybe_unused is used insted of a #ifdef guard as it looks slighly
cleaner and it avoids issues if in the future other permutations of the
config options would use the function.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
cea86c5bb442 ("drm/bridge: ti-sn65dsi86: Implement the pwm_chip")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028163548.273736-1-bjorn.andersson@linaro.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Guangming Cao [Thu, 14 Oct 2021 10:25:51 +0000 (18:25 +0800)]
dma-buf: remove restriction of IOCTL:DMA_BUF_SET_NAME
In this patch(https://patchwork.freedesktop.org/patch/310349),
it add a new IOCTL to support dma-buf user to set debug name.
But it also added a limitation of this IOCTL, it needs the
attachments of dmabuf should be empty, otherwise it will fail.
For the original series, the idea was that allowing name change
mid-use could confuse the users about the dma-buf.
However, the rest of the series also makes sure each dma-buf have a unique
inode(https://patchwork.freedesktop.org/patch/310387/), and any accounting
should probably use that, without relying on the name as much.
So, removing this restriction will let dma-buf userspace users to use it
more comfortably and without any side effect.
Signed-off-by: Guangming Cao <Guangming.Cao@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014102551.54983-1-guangming.cao@mediatek.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>