OSDN Git Service
Aleksandar Markovic [Wed, 26 Jun 2019 10:07:09 +0000 (12:07 +0200)]
target/mips: Fix big endian host behavior for interleave MSA instructions
Fix big endian host behavior for interleave MSA instructions. Previous
fix used TARGET_WORDS_BIGENDIAN instead of HOST_WORDS_BIGENDIAN, which
was a mistake.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561543629-20327-9-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 26 Jun 2019 10:07:08 +0000 (12:07 +0200)]
tests/tcg: target/mips: Fix some test cases for pack MSA instructions
Fix certian test cases for MSA pack instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561543629-20327-8-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 26 Jun 2019 10:07:07 +0000 (12:07 +0200)]
tests/tcg: target/mips: Add support for MSA MIPS32R6 testings
Add files for MSA MIPS32R6 target testings (copiling and running).
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561543629-20327-7-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 26 Jun 2019 10:07:06 +0000 (12:07 +0200)]
tests/tcg: target/mips: Add support for MSA big-endian target testings
Add files for MSA big-endian target testings (copiling and running).
Little-endian files are renamed and ammended too.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561543629-20327-6-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 26 Jun 2019 10:07:05 +0000 (12:07 +0200)]
tests/tcg: target/mips: Amend tests for MSA int multiply instructions
Amend tests for MSA int multiply instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561543629-20327-5-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 26 Jun 2019 10:07:04 +0000 (12:07 +0200)]
tests/tcg: target/mips: Amend tests for MSA int dot product instructions
Add tests for instructions whose result depends on the value in destination
register (prior to instruction execution).
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561543629-20327-4-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 26 Jun 2019 10:07:03 +0000 (12:07 +0200)]
tests/tcg: target/mips: Add tests for MSA move instructions
Add tests for MSA move instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561543629-20327-3-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Wed, 26 Jun 2019 10:07:02 +0000 (12:07 +0200)]
tests/tcg: target/mips: Add tests for MSA bit move instructions
Add tests for MSA bit move instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561543629-20327-2-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Tue, 25 Jun 2019 14:27:18 +0000 (16:27 +0200)]
dma/rc4030: Minor code style cleanup
Fix some simple checkpatch.pl warnings in rc4030.c.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1561472838-32272-3-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Tue, 25 Jun 2019 14:27:17 +0000 (16:27 +0200)]
dma/rc4030: Fix off-by-one error in specified memory region size
The size is one byte less than it should be:
address-space: rc4030-dma
0000000000000000-
00000000fffffffe (prio 0, i/o): rc4030.dma
rc4030 is used in MIPS Jazz board context.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1561472838-32272-2-git-send-email-aleksandar.markovic@rt-rk.com>
Philippe Mathieu-Daudé [Mon, 24 Jun 2019 22:28:41 +0000 (00:28 +0200)]
hw/mips/gt64xxx_pci: Align the pci0-mem size
One byte is missing, use an aligned size.
(qemu) info mtree
memory-region: pci0-mem
0000000000000000-
00000000fffffffe (prio 0, i/o): pci0-mem
^
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20190624222844.26584-8-f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 24 Jun 2019 22:28:40 +0000 (00:28 +0200)]
hw/mips/gt64xxx_pci: Convert debug printf()s to trace events
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20190624222844.26584-7-f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 24 Jun 2019 22:28:39 +0000 (00:28 +0200)]
hw/mips/gt64xxx_pci: Use qemu_log_mask() instead of debug printf()
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20190624222844.26584-6-f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 24 Jun 2019 22:28:38 +0000 (00:28 +0200)]
hw/mips/gt64xxx_pci: Fix 'spaces' coding style issues
Since we'll move this code around, fix its style first:
ERROR: space prohibited between function name and open parenthesis
ERROR: line over 90 characters
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20190624222844.26584-5-f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 24 Jun 2019 22:28:37 +0000 (00:28 +0200)]
hw/mips/gt64xxx_pci: Fix 'braces' coding style issues
Since we'll move this code around, fix its style first:
ERROR: braces {} are necessary for all arms of this statement
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20190624222844.26584-4-f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 24 Jun 2019 22:28:36 +0000 (00:28 +0200)]
hw/mips/gt64xxx_pci: Fix 'tabs' coding style issues
Since we'll move this code around, fix its style first:
ERROR: code indent should never use tabs
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20190624222844.26584-3-f4bug@amsat.org>
Philippe Mathieu-Daudé [Mon, 24 Jun 2019 22:28:35 +0000 (00:28 +0200)]
hw/mips/gt64xxx_pci: Fix multiline comment syntax
Since commit
8c06fbdf36b checkpatch.pl enforce a new multiline
comment syntax. Since we'll move this code around, fix its style
first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <
20190624222844.26584-2-f4bug@amsat.org>
Peter Maydell [Fri, 21 Jun 2019 14:40:50 +0000 (15:40 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jun-21-2019' into staging
MIPS queue for June 21st, 2019
# gpg: Signature made Fri 21 Jun 2019 10:46:57 BST
# gpg: using RSA key
D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jun-21-2019:
target/mips: Fix emulation of ILVR.<B|H|W> on big endian host
target/mips: Fix emulation of ILVL.<B|H|W> on big endian host
target/mips: Fix emulation of ILVOD.<B|H|W> on big endian host
target/mips: Fix emulation of ILVEV.<B|H|W> on big endian host
tests/tcg: target/mips: Amend tests for MSA pack instructions
tests/tcg: target/mips: Include isa/ase and group name in test output
target/mips: Fix if-else-switch-case arms checkpatch errors in translate.c
target/mips: Fix some space checkpatch errors in translate.c
MAINTAINERS: Consolidate MIPS disassembler-related items
MAINTAINERS: Update file items for MIPS Malta board
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 21 Jun 2019 12:32:10 +0000 (13:32 +0100)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Nuke hw_compat_4_0_1 and pc_compat_4_0_1 (Greg)
* Static analysis fixes (Igor, Lidong)
* X86 Hyper-V CPUID improvements (Vitaly)
* X86 nested virt migration (Liran)
* New MSR-based features (Xiaoyao)
# gpg: Signature made Fri 21 Jun 2019 12:25:42 BST
# gpg: using RSA key
BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (25 commits)
hw: Nuke hw_compat_4_0_1 and pc_compat_4_0_1
util/main-loop: Fix incorrect assertion
sd: Fix out-of-bounds assertions
target/i386: kvm: Add nested migration blocker only when kernel lacks required capabilities
target/i386: kvm: Add support for KVM_CAP_EXCEPTION_PAYLOAD
target/i386: kvm: Add support for save and restore nested state
vmstate: Add support for kernel integer types
linux-headers: sync with latest KVM headers from Linux 5.2
target/i386: kvm: Block migration for vCPUs exposed with nested virtualization
target/i386: kvm: Re-inject #DB to guest with updated DR6
target/i386: kvm: Use symbolic constant for #DB/#BP exception constants
KVM: Introduce kvm_arch_destroy_vcpu()
target/i386: kvm: Delete VMX migration blocker on vCPU init failure
target/i386: define a new MSR based feature word - FEAT_CORE_CAPABILITY
i386/kvm: add support for Direct Mode for Hyper-V synthetic timers
i386/kvm: hv-evmcs requires hv-vapic
i386/kvm: hv-tlbflush/ipi require hv-vpindex
i386/kvm: hv-stimer requires hv-time and hv-synic
i386/kvm: implement 'hv-passthrough' mode
i386/kvm: document existing Hyper-V enlightenments
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Greg Kurz [Fri, 14 Jun 2019 13:09:02 +0000 (15:09 +0200)]
hw: Nuke hw_compat_4_0_1 and pc_compat_4_0_1
Commit
c87759ce876a fixed a regression affecting pc-q35 machines by
introducing a new pc-q35-4.0.1 machine version to be used instead
of pc-q35-4.0. The only purpose was to revert the default behaviour
of not using split irqchip, but the change also introduced the usual
hw_compat and pc_compat bits, and wired them for pc-q35 only.
This raises questions when it comes to add new compat properties for
4.0* machine versions of any architecture. Where to add them ? In
4.0, 4.0.1 or both ? Error prone. Another possibility would be to teach
all other architectures about 4.0.1. This solution isn't satisfying,
especially since this is a pc-q35 specific issue.
It turns out that the split irqchip default is handled in the machine
option function and doesn't involve compat lists at all.
Drop all the 4.0.1 compat lists and use the 4.0 ones instead in the 4.0.1
machine option function.
Move the compat props that were added to the 4.0.1 since
c87759ce876a to
4.0.
Even if only hw_compat_4_0_1 had an impact on other architectures,
drop pc_compat_4_0_1 as well for consistency.
Fixes:
c87759ce876a "q35: Revert to kernel irqchip"
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <
156051774276.244890.
8660277280145466396.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lidong Chen [Wed, 19 Jun 2019 19:14:47 +0000 (15:14 -0400)]
util/main-loop: Fix incorrect assertion
The check for poll_fds in g_assert() was incorrect. The correct assertion
should check "n_poll_fds + w->num <= ARRAY_SIZE(poll_fds)" because the
subsequent for-loop is doing access to poll_fds[n_poll_fds + i] where i
is in [0, w->num). This could happen with a very high number of file
descriptors and/or wait objects.
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
ded30967982811617ce7f0222d11228130c198b7.
1560806687.git.lidong.chen@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lidong Chen [Wed, 19 Jun 2019 19:14:46 +0000 (15:14 -0400)]
sd: Fix out-of-bounds assertions
Due to an off-by-one error, the assert statements allow an
out-of-bound array access. This doesn't happen in practice,
but the static analyzer notices.
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <
6b19cb7359a10a6bedc3ea0fce22fed3ef93c102.
1560806687.git.lidong.chen@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:40 +0000 (19:21 +0300)]
target/i386: kvm: Add nested migration blocker only when kernel lacks required capabilities
Previous commits have added support for migration of nested virtualization
workloads. This was done by utilising two new KVM capabilities:
KVM_CAP_NESTED_STATE and KVM_CAP_EXCEPTION_PAYLOAD. Both which are
required in order to correctly migrate such workloads.
Therefore, change code to add a migration blocker for vCPUs exposed with
Intel VMX or AMD SVM in case one of these kernel capabilities is
missing.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <
20190619162140.133674-11-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:39 +0000 (19:21 +0300)]
target/i386: kvm: Add support for KVM_CAP_EXCEPTION_PAYLOAD
Kernel commit
c4f55198c7c2 ("kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD")
introduced a new KVM capability which allows userspace to correctly
distinguish between pending and injected exceptions.
This distinguish is important in case of nested virtualization scenarios
because a L2 pending exception can still be intercepted by the L1 hypervisor
while a L2 injected exception cannot.
Furthermore, when an exception is attempted to be injected by QEMU,
QEMU should specify the exception payload (CR2 in case of #PF or
DR6 in case of #DB) instead of having the payload already delivered in
the respective vCPU register. Because in case exception is injected to
L2 guest and is intercepted by L1 hypervisor, then payload needs to be
reported to L1 intercept (VMExit handler) while still preserving
respective vCPU register unchanged.
This commit adds support for QEMU to properly utilise this new KVM
capability (KVM_CAP_EXCEPTION_PAYLOAD).
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <
20190619162140.133674-10-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:38 +0000 (19:21 +0300)]
target/i386: kvm: Add support for save and restore nested state
Kernel commit
8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
introduced new IOCTLs to extract and restore vCPU state related to
Intel VMX & AMD SVM.
Utilize these IOCTLs to add support for migration of VMs which are
running nested hypervisors.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Tested-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <
20190619162140.133674-9-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:37 +0000 (19:21 +0300)]
vmstate: Add support for kernel integer types
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20190619162140.133674-8-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:36 +0000 (19:21 +0300)]
linux-headers: sync with latest KVM headers from Linux 5.2
Improve the KVM_{GET,SET}_NESTED_STATE structs by detailing the format
of VMX nested state data in a struct.
In order to avoid changing the ioctl values of
KVM_{GET,SET}_NESTED_STATE, there is a need to preserve
sizeof(struct kvm_nested_state). This is done by defining the data
struct as "data.vmx[0]". It was the most elegant way I found to
preserve struct size while still keeping struct readable and easy to
maintain. It does have a misfortunate side-effect that now it has to be
accessed as "data.vmx[0]" rather than just "data.vmx".
Because we are already modifying these structs, I also modified the
following:
* Define the "format" field values as macros.
* Rename vmcs_pa to vmcs12_pa for better readability.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <
20190619162140.133674-7-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:35 +0000 (19:21 +0300)]
target/i386: kvm: Block migration for vCPUs exposed with nested virtualization
Commit
d98f26073beb ("target/i386: kvm: add VMX migration blocker")
added a migration blocker for vCPU exposed with Intel VMX.
However, migration should also be blocked for vCPU exposed with
AMD SVM.
Both cases should be blocked because QEMU should extract additional
vCPU state from KVM that should be migrated as part of vCPU VMState.
E.g. Whether vCPU is running in guest-mode or host-mode.
Fixes:
d98f26073beb ("target/i386: kvm: add VMX migration blocker")
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <
20190619162140.133674-6-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Aleksandar Markovic [Thu, 20 Jun 2019 13:45:49 +0000 (15:45 +0200)]
target/mips: Fix emulation of ILVR.<B|H|W> on big endian host
Fix emulation of ILVR.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561038349-17105-5-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 13:45:48 +0000 (15:45 +0200)]
target/mips: Fix emulation of ILVL.<B|H|W> on big endian host
Fix emulation of ILVL.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561038349-17105-4-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 13:45:47 +0000 (15:45 +0200)]
target/mips: Fix emulation of ILVOD.<B|H|W> on big endian host
Fix emulation of ILVOD.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561038349-17105-3-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 13:45:46 +0000 (15:45 +0200)]
target/mips: Fix emulation of ILVEV.<B|H|W> on big endian host
Fix emulation of ILVEV.<B|H|W> on big endian host by applying
mapping of data element indexes from one endian to another.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561038349-17105-2-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 11:49:18 +0000 (13:49 +0200)]
tests/tcg: target/mips: Amend tests for MSA pack instructions
Add tests for cases when destination register is the same as one
of source registers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561031359-6727-3-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 11:49:17 +0000 (13:49 +0200)]
tests/tcg: target/mips: Include isa/ase and group name in test output
For better appearance and usefullnes, include ISA/ASE name and
instruction group name in the output of tests. For example, all
this data will be displayed for FMAX_A.W test:
| MSA | Float Max Min | FMAX_A.W |
| PASS: 80 | FAIL: 0 | elapsed time: 0.16 ms |
(the data will be displayed in one row; they are presented here in two
rows not to exceed the width of the commit message)
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561031359-6727-2-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 13:33:15 +0000 (15:33 +0200)]
target/mips: Fix if-else-switch-case arms checkpatch errors in translate.c
Remove if-else-switch-case-arms-related checkpatch errors.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1561037595-14413-5-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 13:33:14 +0000 (15:33 +0200)]
target/mips: Fix some space checkpatch errors in translate.c
Remove some space-related checkpatch warning.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <
1561037595-14413-4-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 13:33:13 +0000 (15:33 +0200)]
MAINTAINERS: Consolidate MIPS disassembler-related items
Eliminate duplicate MIPS disassembler-related items in the
MAINTAINERS file, and use wildcards to shorten the list of
involved files.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561037595-14413-3-git-send-email-aleksandar.markovic@rt-rk.com>
Aleksandar Markovic [Thu, 20 Jun 2019 13:33:12 +0000 (15:33 +0200)]
MAINTAINERS: Update file items for MIPS Malta board
hw/mips/gt64xxx_pci.c is used for Malta only, so it is logical to
place this file in Malta board section of the MAINTAINERS file.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <
1561037595-14413-2-git-send-email-aleksandar.markovic@rt-rk.com>
Liran Alon [Wed, 19 Jun 2019 16:21:34 +0000 (19:21 +0300)]
target/i386: kvm: Re-inject #DB to guest with updated DR6
If userspace (QEMU) debug guest, when #DB is raised in guest and
intercepted by KVM, KVM forwards information on #DB to userspace
instead of injecting #DB to guest.
While doing so, KVM don't update vCPU DR6 but instead report the #DB DR6
value to userspace for further handling.
See KVM's handle_exception() DB_VECTOR handler.
QEMU handler for this case is kvm_handle_debug(). This handler basically
checks if #DB is related to one of user set hardware breakpoints and if
not, it re-inject #DB into guest.
The re-injection is done by setting env->exception_injected to #DB which
will later be passed as events.exception.nr to KVM_SET_VCPU_EVENTS ioctl
by kvm_put_vcpu_events().
However, in case userspace re-injects #DB, KVM expects userspace to set
vCPU DR6 as reported to userspace when #DB was intercepted! Otherwise,
KVM_REQ_EVENT handler will inject #DB with wrong DR6 to guest.
Fix this issue by updating vCPU DR6 appropriately when re-inject #DB to
guest.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <
20190619162140.133674-5-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:33 +0000 (19:21 +0300)]
target/i386: kvm: Use symbolic constant for #DB/#BP exception constants
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <
20190619162140.133674-4-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:32 +0000 (19:21 +0300)]
KVM: Introduce kvm_arch_destroy_vcpu()
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.
This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().
Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <
20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 19 Jun 2019 16:21:31 +0000 (19:21 +0300)]
target/i386: kvm: Delete VMX migration blocker on vCPU init failure
Commit
d98f26073beb ("target/i386: kvm: add VMX migration blocker")
added migration blocker for vCPU exposed with Intel VMX because QEMU
doesn't yet contain code to support migration of nested virtualization
workloads.
However, that commit missed adding deletion of the migration blocker in
case init of vCPU failed. Similar to invtsc_mig_blocker. This commit fix
that issue.
Fixes:
d98f26073beb ("target/i386: kvm: add VMX migration blocker")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <
20190619162140.133674-2-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xiaoyao Li [Mon, 17 Jun 2019 15:36:54 +0000 (23:36 +0800)]
target/i386: define a new MSR based feature word - FEAT_CORE_CAPABILITY
MSR IA32_CORE_CAPABILITY is a feature-enumerating MSR, which only
enumerates the feature split lock detection (via bit 5) by now.
The existence of MSR IA32_CORE_CAPABILITY is enumerated by CPUID.7_0:EDX[30].
The latest kernel patches about them can be found here:
https://lkml.org/lkml/2019/4/24/1909
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Message-Id: <
20190617153654.916-1-xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:24 +0000 (16:19 +0200)]
i386/kvm: add support for Direct Mode for Hyper-V synthetic timers
Hyper-V on KVM can only use Synthetic timers with Direct Mode (opting for
an interrupt instead of VMBus message). This new capability is only
announced in KVM_GET_SUPPORTED_HV_CPUID.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:23 +0000 (16:19 +0200)]
i386/kvm: hv-evmcs requires hv-vapic
Enlightened VMCS is enabled by writing to a field in VP assist page and
these require virtual APIC.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:22 +0000 (16:19 +0200)]
i386/kvm: hv-tlbflush/ipi require hv-vpindex
The corresponding hypercalls require using VP indexes.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:21 +0000 (16:19 +0200)]
i386/kvm: hv-stimer requires hv-time and hv-synic
Synthetic timers operate in hv-time time and Windows won't use these
without SynIC.
Add .dependencies field to kvm_hyperv_properties[] and a generic mechanism
to check dependencies between features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:20 +0000 (16:19 +0200)]
i386/kvm: implement 'hv-passthrough' mode
In many case we just want to give Windows guests all currently supported
Hyper-V enlightenments and that's where this new mode may come handy. We
pass through what was returned by KVM_GET_SUPPORTED_HV_CPUID.
hv_cpuid_check_and_set() is modified to also set cpu->hyperv_* flags as
we may want to check them later (and we actually do for hv_runtime,
hv_synic,...).
'hv-passthrough' is a development only feature, a migration blocker is
added to prevent issues while migrating between hosts with different
feature sets.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:19 +0000 (16:19 +0200)]
i386/kvm: document existing Hyper-V enlightenments
Currently, there is no doc describing hv-* CPU flags, people are
encouraged to get the information from Microsoft Hyper-V Top Level
Functional specification (TLFS). There is, however, a bit of QEMU
specifics.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:18 +0000 (16:19 +0200)]
i386/kvm: move Hyper-V CPUID filling to hyperv_handle_properties()
Let's consolidate Hyper-V features handling in hyperv_handle_properties().
The change is necessary to support 'hv-passthrough' mode as we'll be just
copying CPUIDs from KVM instead of filling them in.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:17 +0000 (16:19 +0200)]
i386/kvm: add support for KVM_GET_SUPPORTED_HV_CPUID
KVM now supports reporting supported Hyper-V features through CPUID
(KVM_GET_SUPPORTED_HV_CPUID ioctl). Going forward, this is going to be
the only way to announce new functionality and this has already happened
with Direct Mode stimers.
While we could just support KVM_GET_SUPPORTED_HV_CPUID for new features,
it seems to be beneficial to use it for all Hyper-V enlightenments when
possible. This way we can implement 'hv-all' pass-through mode giving the
guest all supported Hyper-V features even when QEMU knows nothing about
them.
Implementation-wise we create a new kvm_hyperv_properties structure
defining Hyper-V features, get_supported_hv_cpuid()/
get_supported_hv_cpuid_legacy() returning the supported CPUID set and
a bit over-engineered hv_cpuid_check_and_set() which we will also be
used to set cpu->hyperv_* properties for 'hv-all' mode.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 17 May 2019 14:19:16 +0000 (16:19 +0200)]
i386/kvm: convert hyperv enlightenments properties from bools to bits
Representing Hyper-V properties as bits will allow us to check features
and dependencies between them in a natural way.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <
20190517141924.19024-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Colin Xu [Mon, 10 Jun 2019 02:19:39 +0000 (10:19 +0800)]
hax: Honor CPUState::halted
QEMU tracks whether a vcpu is halted using CPUState::halted. E.g.,
after initialization or reset, halted is 0 for the BSP (vcpu 0)
and 1 for the APs (vcpu 1, 2, ...). A halted vcpu should not be
handed to the hypervisor to run (e.g. hax_vcpu_run()).
Under HAXM, Android Emulator sometimes boots into a "vcpu shutdown
request" error while executing in SeaBIOS, with the HAXM driver
logging a guest triple fault in vcpu 1, 2, ... at RIP 0x3. That is
ultimately because the HAX accelerator asks HAXM to run those APs
when they are still in the halted state.
Normally, the vcpu thread for an AP will start by looping in
qemu_wait_io_event(), until the BSP kicks it via a pair of IPIs
(INIT followed by SIPI). But because the HAX accelerator does not
honor cpu->halted, it allows the AP vcpu thread to proceed to
hax_vcpu_run() as soon as it receives any kick, even if the kick
does not come from the BSP. It turns out that emulator has a
worker thread which periodically kicks every vcpu thread (possibly
to collect CPU usage data), and if one of these kicks comes before
those by the BSP, the AP will start execution from the wrong RIP,
resulting in the aforementioned SMP boot failure.
The solution is inspired by the KVM accelerator (credit to
Chuanxiao Dong <chuanxiao.dong@intel.com> for the pointer):
1. Get rid of questionable logic that unconditionally resets
cpu->halted before hax_vcpu_run(). Instead, only reset it at the
right moments (there are only a few "unhalt" events).
2. Add a check for cpu->halted before hax_vcpu_run().
Note that although the non-Unrestricted Guest (!ug_platform) code
path also forcibly resets cpu->halted, it is left untouched,
because only the UG code path supports SMP guests.
The patch is first merged to android emulator with Change-Id:
I9c5752cc737fd305d7eace1768ea12a07309d716
Cc: Yu Ning <yu.ning@intel.com>
Cc: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Message-Id: <
20190610021939.13669-1-colin.xu@intel.com>
Yury Kotov [Fri, 7 Jun 2019 09:08:30 +0000 (12:08 +0300)]
kvm-all: Add/update fprintf's for kvm_*_ioeventfd_del
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <
20190607090830.18807-1-yury-kotov@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 18 Jun 2019 16:00:52 +0000 (17:00 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- block: Remove bs->job
- block: Ignore loosening perm restrictions failures
- block/null: Expose read-zeroes option in QAPI schema
- iotests: Hide timestamps for skipped tests
# gpg: Signature made Tue 18 Jun 2019 15:44:12 BST
# gpg: using RSA key
7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block/null: Expose read-zeroes option in QAPI schema
iotests: Test failure to loosen restrictions
block: Ignore loosening perm restrictions failures
block: Add *tighten_restrictions to *check*_perm()
block: Fix order in bdrv_replace_child()
block/commit: Drop bdrv_child_try_set_perm()
block/mirror: Fix child permissions
block: Add bdrv_child_refresh_perms()
file-posix: Update open_flags in raw_set_perm()
block: drop bs->job
blockdev: blockdev_mark_auto_del: drop usage of bs->job
block/block-backend: blk_iostatus_reset: drop usage of bs->job
block/replication: drop usage of bs->job
iotests: Hide timestamps for skipped tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 18 Jun 2019 14:47:16 +0000 (15:47 +0100)]
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2019-06-18
Use a different method to dump avocado job log, to work around
timing-dependent issues in the arm test cases.
# gpg: Signature made Tue 18 Jun 2019 15:39:31 BST
# gpg: using RSA key
2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
Travis: print acceptance tests logs in case of job failure
Revert "travis: Make check-acceptance job more verbose"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Mon, 17 Jun 2019 11:54:48 +0000 (13:54 +0200)]
block/null: Expose read-zeroes option in QAPI schema
Commit
cd219eb1e55 added the read-zeroes option for the null-co and
null-aio block driver, but forgot to add them to the QAPI schema.
Therefore, this option wasn't available in -blockdev and blockdev-add
until now.
Add the missing option in the schema to make it available there, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Wed, 22 May 2019 17:03:52 +0000 (19:03 +0200)]
iotests: Test failure to loosen restrictions
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 22 May 2019 17:03:51 +0000 (19:03 +0200)]
block: Ignore loosening perm restrictions failures
We generally assume that loosening permission restrictions can never
fail. We have seen in the past that this assumption is wrong. This has
led to crashes because we generally pass &error_abort when loosening
permissions.
However, a failure in such a case should actually be handled in quite
the opposite way: It is very much not fatal, so qemu may report it, but
still consider the operation successful. The only realistic problem is
that qemu may then retain permissions and thus locks on images it
actually does not require. But again, that is not fatal.
To implement this behavior, we make all functions that change
permissions and that pass &error_abort to the initiating function
(bdrv_check_perm() or bdrv_child_check_perm()) evaluate the
@loosen_restrictions value introduced in the previous patch. If it is
true and an error did occur, we abort the permission update, discard the
error, and instead report success to the caller.
bdrv_child_try_set_perm() itself does not pass &error_abort, but it is
the only public function to change permissions. As such, callers may
pass &error_abort to it, expecting dropping permission restrictions to
never fail.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 22 May 2019 17:03:50 +0000 (19:03 +0200)]
block: Add *tighten_restrictions to *check*_perm()
This patch makes three functions report whether the necessary permission
change tightens restrictions or not. These functions are:
- bdrv_check_perm()
- bdrv_check_update_perm()
- bdrv_child_check_perm()
Callers can use this result to decide whether a failure is fatal or not
(see the next patch).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 22 May 2019 17:03:49 +0000 (19:03 +0200)]
block: Fix order in bdrv_replace_child()
We have to start by applying the permission restrictions to new_bs
before we can loosen them on old_bs. See the comment for the
explanation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 22 May 2019 17:03:48 +0000 (19:03 +0200)]
block/commit: Drop bdrv_child_try_set_perm()
commit_top_bs never requests or unshares any permissions. There is no
reason to make this so explicit here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 22 May 2019 17:03:47 +0000 (19:03 +0200)]
block/mirror: Fix child permissions
We cannot use bdrv_child_try_set_perm() to give up all restrictions on
the child edge, and still have bdrv_mirror_top_child_perm() request
BLK_PERM_WRITE. Fix this by making bdrv_mirror_top_child_perm() return
0/BLK_PERM_ALL when we want to give up all permissions, and replacing
bdrv_child_try_set_perm() by bdrv_child_refresh_perms().
The bdrv_child_try_set_perm() before removing the node with
bdrv_replace_node() is then unnecessary. No permissions have changed
since the previous invocation of bdrv_child_try_set_perm().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 22 May 2019 17:03:46 +0000 (19:03 +0200)]
block: Add bdrv_child_refresh_perms()
If a block node uses bdrv_child_try_set_perm() to change the permission
it takes on its child, the result may be very short-lived. If anything
makes the block layer recalculate the permissions internally, it will
invoke the node driver's .bdrv_child_perm() implementation. The
permission/shared permissions masks that returns will then override the
values previously passed to bdrv_child_try_set_perm().
If drivers want a child edge to have specific values for the
permissions/shared permissions mask, it must return them in
.bdrv_child_perm(). Consequentially, there is no need for them to pass
the same values to bdrv_child_try_set_perm() then: It is better to have
a function that invokes .bdrv_child_perm() and calls
bdrv_child_try_set_perm() with the result. This patch adds such a
function under the name of bdrv_child_refresh_perms().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 22 May 2019 17:03:45 +0000 (19:03 +0200)]
file-posix: Update open_flags in raw_set_perm()
raw_check_perm() + raw_set_perm() can change the flags associated with
the current FD. If so, we have to update BDRVRawState.open_flags
accordingly. Otherwise, we may keep reopening the FD even though the
current one already has the correct flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 6 Jun 2019 15:41:32 +0000 (18:41 +0300)]
block: drop bs->job
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
3.1 Some jobs creates filters to be their main node, so, this check
don't actually prevent creating second job on same real node (which
will create another filter node) (but I hope it is restricted by
other mechanisms)
3.2 Even without bs->job we have two systems of permissions:
op-blockers and BLK_PERM
3.3 We may want to run several jobs on one node one day
And finally, drop bs->job pointer itself. Hurrah!
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 6 Jun 2019 15:41:31 +0000 (18:41 +0300)]
blockdev: blockdev_mark_auto_del: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in
blockdev_mark_auto_del: instead of looking at bs->job let's check all
jobs for references to bs.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 6 Jun 2019 15:41:30 +0000 (18:41 +0300)]
block/block-backend: blk_iostatus_reset: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in
blk_iostatus_reset.
blk_iostatus_reset() has only two callers:
1. blk_attach_dev(). This doesn't have anything to do with jobs and
attaching a new guest device won't solve any problem the job
encountered, so no reason to reset the iostatus for the job.
2. qmp_cont(). This resets the iostatus for everything. We can just
call block_job_iostatus_reset() for all block jobs instead of going
through BlockBackend.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Vladimir Sementsov-Ogievskiy [Thu, 6 Jun 2019 15:41:29 +0000 (18:41 +0300)]
block/replication: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in replication
code. Additionally we have to return job pointer from some mirror APIs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Thu, 13 Jun 2019 18:37:27 +0000 (20:37 +0200)]
iotests: Hide timestamps for skipped tests
Currently, the "thistime" variable is not reinitialized on every loop
iteration. This leads to tests that do not yield a run time (because
they failed or were skipped) printing the run time of the previous test
that did. Fix that by reinitializing "thistime" for every test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cleber Rosa [Fri, 7 Jun 2019 15:22:16 +0000 (11:22 -0400)]
Travis: print acceptance tests logs in case of job failure
Because Travis doesn't allow us to keep files produced during tests
(such as log files), let's print the complete job log to the "console"
in case of job failures.
This is a debugging aid, and given that there's been some timeouts
happening on some tests, we absolutely needs the logs to have a proper
action.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <
20190607152223.9467-2-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Tue, 18 Jun 2019 14:10:43 +0000 (11:10 -0300)]
Revert "travis: Make check-acceptance job more verbose"
This reverts commit
6d7a134da4afebe8551a69329478415cfb4cbe91.
We'll have a better fix, that will show the full avocado job log
only if a test case failed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Mon, 17 Jun 2019 16:01:30 +0000 (17:01 +0100)]
target/arm: Check for dp support for dp VFM, not sp
In commit
1120827fa182f0e7622 we accidentally put the
"UNDEF unless FPU has double-precision support" check in
the single-precision VFM function. Put it in the dp
function where it belongs.
Fixes:
1120827fa182f0e7622
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190617160130.3207-1-peter.maydell@linaro.org
Peter Maydell [Tue, 18 Jun 2019 09:47:00 +0000 (10:47 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-06-17-v2' into staging
Monitor patches for 2019-06-17
# gpg: Signature made Tue 18 Jun 2019 07:20:25 BST
# gpg: using RSA key
354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-monitor-2019-06-17-v2:
vl: Deprecate -mon pretty=... for HMP monitors
monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()
monitor: Split Monitor.flags into separate bools
monitor: Split out monitor/monitor.c
monitor: Split out monitor/hmp.c
monitor: Split out monitor/qmp.c
monitor: Create monitor-internal.h with common definitions
monitor: Move {hmp, qmp}.c to monitor/{hmp, qmp}-cmds.c
Move monitor.c to monitor/misc.c
monitor: Rename HMP command type and tables
monitor: Remove Monitor.cmd_table indirection
monitor: Create MonitorHMP with readline state
monitor: Make MonitorQMP a child class of Monitor
monitor: Split monitor_init in HMP and QMP function
monitor: Remove unused password prompting fields
monitor: Fix return type of monitor_fdset_dup_fd_find
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Thu, 13 Jun 2019 15:34:05 +0000 (17:34 +0200)]
vl: Deprecate -mon pretty=... for HMP monitors
The -mon pretty=on|off switch of the -mon option applies only to QMP
monitors. It's silently ignored for HMP. Deprecate this combination so
that we can make it an error in future versions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20190613153405.24769-16-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:34:04 +0000 (17:34 +0200)]
monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()
Most callers know which monitor type they want to have. Instead of
calling monitor_init() with flags that can describe both types of
monitors, make monitor_init_{hmp,qmp}() public interfaces that take
specific bools instead of flags and call these functions directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20190613153405.24769-15-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:34:03 +0000 (17:34 +0200)]
monitor: Split Monitor.flags into separate bools
Monitor.flags contains three different flags: One to distinguish HMP
from QMP; one specific to HMP (MONITOR_USE_READLINE) that is ignored
with QMP; and another one specific to QMP (MONITOR_USE_PRETTY) that is
ignored with HMP.
Split the flags field into three bools and move them to the right
subclass. Flags are still in use for the monitor_init() interface.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20190613153405.24769-14-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:34:02 +0000 (17:34 +0200)]
monitor: Split out monitor/monitor.c
Move the monitor core infrastructure from monitor/misc.c to
monitor/monitor.c. This is code that can be shared for all targets, so
compile it only once.
What remains in monitor/misc.c after this patch is mostly monitor
command implementations (which could move to hmp-cmds.c or qmp-cmds.c
later) and code that requires a system emulator or is even
target-dependent (including HMP command completion code).
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between all
monitor parts can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20190613153405.24769-13-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:34:01 +0000 (17:34 +0200)]
monitor: Split out monitor/hmp.c
Move HMP infrastructure from monitor/misc.c to monitor/hmp.c. This is
code that can be shared for all targets, so compile it only once.
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between HMP
and the monitor core can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20190613153405.24769-12-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment reformatted to make checkpatch.pl happy, #include <dirent.h>
moved to fix Windows build, superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:34:00 +0000 (17:34 +0200)]
monitor: Split out monitor/qmp.c
Move QMP infrastructure from monitor/misc.c to monitor/qmp.c. This is
code that can be shared for all targets, so compile it only once.
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between QMP
and the monitor core can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20190613153405.24769-11-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[monitor_is_qmp() tidied up to make checkpatch.pl happy,
superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:59 +0000 (17:33 +0200)]
monitor: Create monitor-internal.h with common definitions
Before we can split monitor/misc.c, we need to create a header file that
contains the common definitions that will be used by multiple source
files.
For a start, add the type definitions for Monitor, MonitorHMP and
MonitorQMP and their dependencies. We'll add functions as needed when
splitting monitor/misc.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20190613153405.24769-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Header guard symbol tidied up, superfluous #include dropped, FIXME in
hmp_change() resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:58 +0000 (17:33 +0200)]
monitor: Move {hmp, qmp}.c to monitor/{hmp, qmp}-cmds.c
Now that we have a monitor/ subdirectory, let's move hmp.c and qmp.c
from the root directory there. As they contain implementations of
monitor commands, rename them to {hmp,qmp}-cmds.c, so that {hmp,qmp}.c
are free for the HMP and QMP infrastructure.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20190613153405.24769-9-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:57 +0000 (17:33 +0200)]
Move monitor.c to monitor/misc.c
Create a new monitor/ subdirectory and move monitor.c there. As the plan
is to move the monitor core into separate files, use the chance to
rename it to misc.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20190613153405.24769-8-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:56 +0000 (17:33 +0200)]
monitor: Rename HMP command type and tables
This renames the type for HMP monitor commands and the tables holding
the commands to make clear that they are related to HMP and to allow
making them public later:
* mon_cmd_t -> HMPCommand (fixing use of a reserved name, too)
* mon_cmds -> hmp_cmds
* info_cmds -> hmp_info_cmds
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20190613153405.24769-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[sortcmdlist() cleaned up to make checkpatch.pl happy]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:55 +0000 (17:33 +0200)]
monitor: Remove Monitor.cmd_table indirection
Monitor.cmd_table is initialised to point to mon_cmds and never changed
afterwards. We can remove the indirection and just reference mon_cmds
directly instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <
20190613153405.24769-6-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:54 +0000 (17:33 +0200)]
monitor: Create MonitorHMP with readline state
The ReadLineState in Monitor is only used for HMP monitors. Create
MonitorHMP and move it there.
Can't use container_of() in hmp_change(). Cast instead, and mark
FIXME. Will be cleaned up shortly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20190613153405.24769-5-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous variable in monitor_data_destroy() eliminated, whitespace
tweaked in hmp_change(), commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:53 +0000 (17:33 +0200)]
monitor: Make MonitorQMP a child class of Monitor
Currently, struct Monitor mixes state that is only relevant for HMP,
state that is only relevant for QMP, and some actually shared state.
In particular, a MonitorQMP field is present in the state of any
monitor, even if it's not a QMP monitor and therefore doesn't use the
state.
As a first step towards a clean separation between QMP and HMP, let
MonitorQMP extend Monitor and create a MonitorQMP object only when the
monitor is actually a QMP monitor.
Some places accessed Monitor.qmp unconditionally, even for HMP monitors.
They can't keep doing this now, so during the conversion, they are
either changed to become conditional on monitor_is_qmp() or to assert()
that they always get a QMP monitor.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <
20190613153405.24769-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous variable in monitor_data_destroy() eliminated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:52 +0000 (17:33 +0200)]
monitor: Split monitor_init in HMP and QMP function
Instead of mixing HMP and QMP monitors in the same function, separate
the monitor creation function for both.
While in theory, one could pass both MONITOR_USE_CONTROL and
MONITOR_USE_READLINE before this patch and both flags would do
something, readline support is tightly coupled with HMP: QMP never feeds
its input to readline, and the tab completion function treats the input
as an HMP command. Therefore, this configuration is useless.
After this patch, the QMP path asserts that MONITOR_USE_READLINE is not
set. The HMP path can be used with or without MONITOR_USE_READLINE, like
before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20190613153405.24769-3-kwolf@redhat.com>
[Zero initialization of Monitor moved from monitor_data_init() to
callers]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Thu, 13 Jun 2019 15:33:51 +0000 (17:33 +0200)]
monitor: Remove unused password prompting fields
Commit
788cf9f8c removed the code for password prompting from the
monitor. Since then, the Monitor fields password_completion_cb and
password_opaque have been unused. Remove them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20190613153405.24769-2-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Yury Kotov [Thu, 23 May 2019 09:44:33 +0000 (12:44 +0300)]
monitor: Fix return type of monitor_fdset_dup_fd_find
monitor_fdset_dup_fd_find_remove() and monitor_fdset_dup_fd_find()
return mon_fdset->id which is int64_t. Downcasting from int64_t to int
leads to a bug with removing fd from fdset with id >= 2^32.
So, fix return types for these function.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <
20190523094433.30297-1-yury-kotov@yandex-team.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Maydell [Mon, 17 Jun 2019 15:41:25 +0000 (16:41 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-
20190617' into staging
docs infrastructure queue:
* fix some minor syntax issues in docs/specs/index.rst
* build and install the 'specs' manual, since it now has some content
* delete the "QEMU compared to other emulators" section of the docs
* Convert "translator internals" docs to RST, move to devel manual
# gpg: Signature made Mon 17 Jun 2019 15:56:07 BST
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-docs-
20190617:
docs: Build and install specs manual
docs/specs/index.rst: Fix minor syntax issues
qemu-tech.texi: Remove "QEMU compared to other emulators" section
Convert "translator internals" docs to RST, move to devel manual
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 17 Jun 2019 14:35:31 +0000 (15:35 +0100)]
docs: Build and install specs manual
Now we have some rST format docs in the docs/specs/ manual, we should
actually build and install it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id:
20190610152444.20859-3-peter.maydell@linaro.org
Peter Maydell [Mon, 17 Jun 2019 14:35:31 +0000 (15:35 +0100)]
docs/specs/index.rst: Fix minor syntax issues
The docs/specs/index.rst has a couple of minor issues which
we didn't notice because we weren't building the manual:
* the ToC entry for the new PPC XIVE docs points to
a nonexistent file
* the initial comment needs to be marked by '..', not '.',
or it will appear in the output
* the title doesn't match the capitialization used by
the existing interop or devel manuals, and uses
'full-system emulation' rather than the 'system emulation'
that the interop manual title uses
Fix these minor issues before we start trying to build the manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id:
20190610152444.20859-2-peter.maydell@linaro.org
Peter Maydell [Mon, 17 Jun 2019 14:35:31 +0000 (15:35 +0100)]
qemu-tech.texi: Remove "QEMU compared to other emulators" section
The "QEMU compared to other emulators" section of our documentation
hasn't been updated since 2015 (and parts of the text are even older).
We're clearly not very well placed to track the evolution of a
dozen other emulation projects, and an inaccurate or out of date
comparison doesn't serve anybody, so we're best off just removing
the whole documentation section.
If anybody cares strongly about maintaining a comparison page,
it's probably better to do that on the project's wiki where
we can update it more dynamically.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190607152827.18003-3-peter.maydell@linaro.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Mon, 17 Jun 2019 14:35:30 +0000 (15:35 +0100)]
Convert "translator internals" docs to RST, move to devel manual
Our user-facing manual currently has a section "translator internals"
which has some high-level information about the design of the
TCG translator. This should really be in our new devel/ manual.
Convert it to RST format and move it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190607152827.18003-2-peter.maydell@linaro.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Mon, 17 Jun 2019 14:35:21 +0000 (15:35 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-
20190617' into staging
target-arm queue:
* support large kernel images in bootloader (by avoiding
putting the initrd over the top of them)
* correctly disable FPU/DSP in the CPU for the mps2-an521, musca-a boards
* arm_gicv3: Fix decoding of ID register range
* arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
* some code cleanups following on from the VFP decodetree conversion
* Only implement doubles if the FPU supports them
(so we now correctly model Cortex-M4, -M33 as single precision only)
# gpg: Signature made Mon 17 Jun 2019 15:33:01 BST
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-
20190617: (24 commits)
target/arm: Only implement doubles if the FPU supports them
target/arm: Fix typos in trans function prototypes
target/arm: Remove unused cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d
target/arm: Stop using deprecated functions in NEON_2RM_VCVT_F32_F16
target/arm: stop using deprecated functions in NEON_2RM_VCVT_F16_F32
target/arm: Stop using cpu_F0s in Neon VCVT fixed-point ops
target/arm: Stop using cpu_F0s for Neon f32/s32 VCVT
target/arm: Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F
target/arm: Stop using cpu_F0s for NEON_2RM_VCVT[ANPM][US]
target/arm: Stop using cpu_F0s for NEON_2RM_VRINT*
target/arm: Stop using cpu_F0s for NEON_2RM_VNEG_F
target/arm: Stop using cpu_F0s for NEON_2RM_VABS_F
target/arm: Use vfp_expand_imm() for AArch32 VFP VMOV_imm
target/arm: Move vfp_expand_imm() to translate.[ch]
hw/intc/arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
hw/intc/arm_gicv3: Fix decoding of ID register range
hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boards
hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPU
target/arm: Allow M-profile CPUs to disable the DSP extension via CPU property
target/arm: Allow VFP and Neon to be disabled via a CPU property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 14 Jun 2019 10:44:57 +0000 (11:44 +0100)]
target/arm: Only implement doubles if the FPU supports them
The architecture permits FPUs which have only single-precision
support, not double-precision; Cortex-M4 and Cortex-M33 are
both like that. Add the necessary checks on the MVFR0 FPDP
field so that we UNDEF any double-precision instructions on
CPUs like this.
Note that even if FPDP==0 the insns like VMOV-to/from-gpreg,
VLDM/VSTM, VLDR/VSTR which take double precision registers
still exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20190614104457.24703-3-peter.maydell@linaro.org
Peter Maydell [Fri, 14 Jun 2019 10:44:56 +0000 (11:44 +0100)]
target/arm: Fix typos in trans function prototypes
In several places cut and paste errors meant we were using the wrong
type for the 'arg' struct in trans_ functions called by the
decodetree decoder, because we were using the _sp version of the
struct in the _dp function. These were harmless, because the two
structs were identical and so decodetree made them typedefs of the
same underlying structure (and we'd have had a compile error if they
were not harmless), but we should clean them up anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20190614104457.24703-2-peter.maydell@linaro.org
Peter Maydell [Thu, 13 Jun 2019 16:39:17 +0000 (17:39 +0100)]
target/arm: Remove unused cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d
Remove the now unused TCG globals cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d.
cpu_M0 is still used by the iwmmxt code, and cpu_V0 and
cpu_V1 are used by both iwmmxt and Neon.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20190613163917.28589-13-peter.maydell@linaro.org
Peter Maydell [Thu, 13 Jun 2019 16:39:16 +0000 (17:39 +0100)]
target/arm: Stop using deprecated functions in NEON_2RM_VCVT_F32_F16
Remove some old constructns from NEON_2RM_VCVT_F16_F32 code:
* don't use CPU_F0s
* don't use tcg_gen_st_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id:
20190613163917.28589-12-peter.maydell@linaro.org