OSDN Git Service
Bernhard Beschow [Sun, 29 May 2022 18:40:06 +0000 (20:40 +0200)]
hw/rtc/mc146818rtc: QOM'ify io_base offset
Exposing the io_base offset as a QOM property not only allows it to be
configurable but also to be displayed in HMP:
Before:
(qemu) info qtree
...
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
irq = 8 (0x8)
lost_tick_policy = "discard"
After:
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
iobase = 112 (0x70)
irq = 8 (0x8)
lost_tick_policy = "discard"
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220529184006.10712-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Sun, 29 May 2022 18:40:05 +0000 (20:40 +0200)]
hw/i386/microvm-dt: Determine mc146818rtc's IRQ number from QOM property
Since commit
3b004a16540aa41f2aa6a1ceb0bf306716766914 'hw/rtc/
mc146818rtc: QOM'ify IRQ number' mc146818rtc's IRQ number is
configurable. Fix microvm-dt to respect its value.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220529184006.10712-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Sun, 29 May 2022 18:40:04 +0000 (20:40 +0200)]
hw/i386/microvm-dt: Force explicit failure if retrieving QOM property fails
New code will be added where this is best practice. So update existing code
as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220529184006.10712-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:45 +0000 (20:50 +0200)]
hw/isa/piix3: Inline and remove piix3_create()
During the previous changesets piix3_create() became a trivial
wrapper around more generic functions. Modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20220603185045.143789-12-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:44 +0000 (20:50 +0200)]
hw/isa/piix3: Factor out ISABus retrieval from piix3_create()
Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20220603185045.143789-11-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:43 +0000 (20:50 +0200)]
hw/isa/piix3: QOM'ify PCI device creation and wiring
PCI interrupt wiring was performed in create() functions which are
obsolete. Move these tasks into QOM functions to modernize the code.
In order to avoid duplicate checking for xen_enabled() the realize
methods are now split.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20220603185045.143789-10-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:42 +0000 (20:50 +0200)]
hw/isa/piix3: Move pci_map_irq_fn near pci_set_irq_fn
The pci_map_irq_fn was implemented below type_init() which made it
inaccessible to QOM functions. So move it up.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220603185045.143789-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:41 +0000 (20:50 +0200)]
hw/isa/piix4: Inline and remove piix4_create()
During the previous changesets piix4_create() became a trivial
wrapper around more generic functions. Modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20220603185045.143789-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:40 +0000 (20:50 +0200)]
hw/isa/piix4: QOM'ify PIIX4 PM creation
Just like the real hardware, create the PIIX4 ACPI controller as part of
the PIIX4 southbridge. This also mirrors how the IDE and USB functions
are already created.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20220603185045.143789-7-shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:39 +0000 (20:50 +0200)]
hw/isa/piix4: Factor out ISABus retrieval from piix4_create()
Modernizes the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220603185045.143789-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:38 +0000 (20:50 +0200)]
hw/isa/piix4: QOM'ify PCI device creation and wiring
PCI interrupt wiring and device creation were performed in create()
functions which are obsolete. Move these tasks into QOM functions to
modernize the code.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20220603185045.143789-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:37 +0000 (20:50 +0200)]
hw/isa/piix4: Move pci_map_irq_fn' near pci_set_irq_fn
The pci_map_irq_fn was implemented below type_init() which made it
inaccessible to QOM functions. So move it up.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220603185045.143789-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:36 +0000 (20:50 +0200)]
hw/isa/piix4: Use object_initialize_child() for embedded struct
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20220603185045.143789-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow [Fri, 3 Jun 2022 18:50:35 +0000 (20:50 +0200)]
hw/southbridge/piix: Aggregate all PIIX southbridge type names
TYPE_PIIX3_PCI_DEVICE resides there as already, so add the remaining
ones, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220603185045.143789-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: remove unused piix4_pm_initfn() function
This function is now unused and so can be completely removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220528091934.15520-13-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/isa/piix4.c: create PIIX4_PM device directly instead of using piix4_pm_initfn()
Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM
device can be instantiated directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220528091934.15520-12-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/i386/pc_piix: create PIIX4_PM device directly instead of using piix4_pm_initfn()
Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM
device can be instantiated directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220528091934.15520-11-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: use qdev gpio to wire up smi_irq
Initialize the SMI IRQ in piix4_pm_init().
The smi_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220528091934.15520-10-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash
20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: use qdev gpio to wire up sci_irq
Introduce piix4_pm_init() instance init function and use it to
initialise the separate qdev gpio for the SCI IRQ.
The sci_irq can now be wired up directly using a qdev gpio instead
of having to set the IRQ externally in piix4_pm_initfn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220528091934.15520-9-mark.cave-ayland@ilande.co.uk>
[PMD: Partially squash
20220528091934.15520-8-mark.cave-ayland@ilande.co.uk]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: rename piix4_pm_init() to piix4_pm_initfn()
When QOMifying a device it is typical to use _init() as the suffix for an
instance_init function, however this name is already in use by the legacy
piix4_pm_init() wrapper function. Eventually the wrapper function will be
removed, but for now rename it to piix4_pm_initfn() to avoid a naming
collision.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220528091934.15520-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: alter piix4_pm_init() to return PIIX4PMState
This exposes the PIIX4_PM device to the caller to allow any qdev gpios to be
mapped outside of piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220528091934.15520-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: move PIIX4PMState into separate piix4.h header
This allows the QOM types in hw/acpi/piix4.c to be used elsewhere by simply including
hw/acpi/piix4.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220528091934.15520-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: convert smm_enabled bool to qdev property
This allows the smm_enabled value to be set using a standard qdev property instead
of being referenced directly in piix4_pm_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <
20220528091934.15520-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: change smm_enabled from int to bool
This is in preparation for conversion to a qdev property.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <
20220528091934.15520-3-mark.cave-ayland@ilande.co.uk>
[PMD: Change simm_enabled from int to bool, suggested by Ani Sinha]
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Mark Cave-Ayland [Sat, 28 May 2022 09:02:11 +0000 (10:02 +0100)]
hw/acpi/piix4: move xen_enabled() logic from piix4_pm_init() to piix4_pm_realize()
This logic can be included as part of piix4_pm_realize() and does not need to
be handled externally.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <
20220528091934.15520-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Peter Maydell [Thu, 5 May 2022 10:18:42 +0000 (11:18 +0100)]
hw/block/fdc-sysbus: Always mark sysbus floppy controllers as not having DMA
The sysbus floppy controllers (devices sysbus-fdc and sun-fdtwo)
don't support DMA. The core floppy controller code expects this to
be indicated by setting FDCtrl::dma_chann to -1. This used to be
done in the device instance_init functions sysbus_fdc_initfn() and
sun4m_fdc_initfn(), but in commit
1430759ec3e we refactored this code
and accidentally lost the setting of dma_chann.
For sysbus-fdc this has no ill effects because we were redundantly
also setting dma_chann in fdctrl_init_sysbus(), but for sun-fdtwo
this means that guests which try to enable DMA on the floppy
controller will cause QEMU to crash because FDCtrl::dma is NULL.
Set dma_chann to -1 in the common instance init, and remove the
redundant code in fdctrl_init_sysbus() that is also setting it.
There is a six-year-old FIXME comment in the jazz board code to the
effect that in theory it should support doing DMA via a custom DMA
controller. If anybody ever chooses to fix that they can do it by
adding support for setting both FDCtrl::dma_chann and FDCtrl::dma.
(A QOM link property 'dma-controller' on the sysbus device which can
be set to an instance of IsaDmaClass is probably the way to go.)
Fixes:
1430759ec3 ("hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.c")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/958
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <
20220505101842.
2757905-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Stefan Pejic [Wed, 4 May 2022 11:04:03 +0000 (13:04 +0200)]
target/mips: Undeprecate nanoMIPS ISA support in QEMU
nanoMIPS ISA support in QEMU is actively used by MediaTek and is
planned to be maintained and potentially extended by MediaTek in
future.
Un-orphan nanoMIPS ISA support in QEMU by setting a maintainer from
MediaTek and remove deprecation notes from documentation as well.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Message-Id: <
20220504110403.613168-8-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Stefan Pejic [Wed, 4 May 2022 11:04:02 +0000 (13:04 +0200)]
target/mips: Add missing default cases for some nanoMIPS pools
Switch statements for the code segments that handle nanoMIPS
instruction pools P.LL, P.SC, P.SHIFT, P.LS.S1, P.LS.E0, PP.LSXS
do not have proper default case, resulting in not generating
reserved instruction exception for certain illegal opcodes.
Fix this by adding default cases for these switch statements that
trigger reserved instruction exception.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220504110403.613168-7-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Dragan Mladjenovic [Wed, 4 May 2022 11:04:01 +0000 (13:04 +0200)]
target/mips: Fix handling of unaligned memory access for nanoMIPS ISA
nanoMIPS ISA does not support unaligned memory access. Adjust
DisasContext's default_tcg_memop_mask to reflect this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220504110403.613168-6-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Dragan Mladjenovic [Wed, 4 May 2022 11:04:00 +0000 (13:04 +0200)]
target/mips: Fix emulation of nanoMIPS BNEC[32] instruction
If both rs and rt are the same register, the nanoMIPS instruction
BNEC[32] rs, rt, address is equivalent to NOP (branch is not taken and
there is no delay slot). This commit provides such behavior. Without
this commit, this scenario results in an incorrect behavior.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220504110403.613168-5-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Dragan Mladjenovic [Wed, 4 May 2022 11:03:59 +0000 (13:03 +0200)]
target/mips: Fix emulation of nanoMIPS BPOSGE32C instruction
There are currently two problems related to the emulation of the
instruction BPOSGE32C.
The nanoMIPS instruction BPOSGE32C belongs to DSP R3 instructions
(actually, as of now, it is the only instruction of DSP R3). The
presence of DSP R3 instructions in QEMU is indicated by the flag
MIPS_HFLAG_DSP_R3 (0x20000000). This flag is currently being properly
set in CPUMIPSState's hflags (for example, for I7200 nanoMIPS CPU).
However, it is not propagated to DisasContext's hflags, since the flag
MIPS_HFLAG_DSP_R3 is not set in MIPS_HFLAG_TMASK (while similar flags
MIPS_HFLAG_DSP_R2 and MIPS_HFLAG_DSP are set in this mask, and there
is no problem in functioning check_dsp_r2(), check_dsp()). This means
the function check_dsp_r3() currently does not work properly, and the
emulation of BPOSGE32C can not work properly as well.
Change MIPS_HFLAG_TMASK from 0x1F5807FF to 0x3F5807FF (logical OR
with 0x20000000) to fix this.
Additionally, check_cp1_enabled() is currently incorrectly called
while emulating BPOSGE32C. BPOSGE32C is in the same pool (P.BR1) as
FPU branch instruction BC1EQZC and BC1NEZC, but it not a part of FPU
(CP1) instructions, and check_cp1_enabled() should not be involved
while emulating BPOSGE32C.
Rearrange invocations of check_cp1_enabled() within P.BR1 pool
handling to affect only BC1EQZC and BC1NEZC emulation, and not
BPOSGE32C emulation.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220504110403.613168-4-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Dragan Mladjenovic [Wed, 4 May 2022 11:03:58 +0000 (13:03 +0200)]
target/mips: Fix emulation of nanoMIPS EXTRV_S.H instruction
The field rs in the instruction EXTRV_S.H rt, ac, rs is specified in
nanoMIPS documentation as opcode[20..16]. It is, however, erroneously
considered as opcode[25..21] in the current QEMU implementation. In
function gen_pool32axf_2_nanomips_insn(), the variable v0_t corresponds
to rt/opcode[25..21], and v1_t corresponds to rs/opcode[20..16]), and
v0_t is by mistake passed to the helper gen_helper_extr_s_h().
Use v1_t rather than v0_t in the invocation of gen_helper_extr_s_h()
to fix this.
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Fixes:
8b3698b294 ("target/mips: Add emulation of DSP ASE for nanoMIPS")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220504110403.613168-3-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Stefan Pejic [Wed, 4 May 2022 11:03:57 +0000 (13:03 +0200)]
target/mips: Fix emulation of nanoMIPS MTHLIP instruction
The field ac in nanoMIPS instruction MTHLIP rs, ac is specified in
nanoMIPS documentation as opcode[15..14] (2 bits). However, in the
current QEMU code, the corresponding argument passed to the helper
gen_helper_mthlip() has the value of opcode[15..11] (5 bits). Right
shift the value of this argument by three bits to fix this.
Signed-off-by: Stefan Pejic <stefan.pejic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220504110403.613168-2-stefan.pejic@syrmia.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Ni Hui [Tue, 3 May 2022 14:42:41 +0000 (22:42 +0800)]
target/mips: Fix FTRUNC_S and FTRUNC_U trans helper
Fix the FTRUNC_S and FTRUNC_U trans helper problem.
Fixes:
5c5b64000c ("target/mips: Convert MSA 2RF instruction format to decodetree")
Signed-off-by: nihui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220503144241.289239-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Ni Hui [Wed, 4 May 2022 02:33:19 +0000 (10:33 +0800)]
target/mips: Fix store adress of high 64bit in helper_msa_st_b()
This patch fix the issue that helper_msa_st_b() write high 64bit
data to where the low 64bit resides, leaving high 64bit undefined.
Fixes:
68ad9260e0 ("target/mips: Use 8-byte memory ops for msa load/store")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220504023319.12923-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Ni Hui [Tue, 3 May 2022 13:07:08 +0000 (21:07 +0800)]
target/mips: Do not treat msa INSERT as NOP when wd is zero
Only for msa COPY_U/COPY_S with wd zero, we treat it as NOP.
Move this special rule into COPY_U and COPY_S trans function.
Fixes:
97fe675519 ("target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220503130708.272850-4-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Ni Hui [Tue, 3 May 2022 13:07:07 +0000 (21:07 +0800)]
target/mips: Fix msa checking condition in trans_msa_elm_fn()
Fix issue that condition of check_msa_enabled(ctx) is reversed
that causes segfault when msa elm_fn op encountered.
Fixes:
2f2745c81a ("target/mips: Convert MSA COPY_U opcode to decodetree")
Fixes:
97fe675519 ("target/mips: Convert MSA COPY_S and INSERT opcodes to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220503130708.272850-3-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Ni Hui [Tue, 3 May 2022 13:07:06 +0000 (21:07 +0800)]
target/mips: Fix df_extract_val() and df_extract_df() dfe lookup
Actually look into dfe structure data so that df_extract_val() and
df_extract_df() can return immediate and datafield other than BYTE.
Fixes:
4701d23aef ("target/mips: Convert MSA BIT instruction format to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220503130708.272850-2-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Ni Hui [Tue, 3 May 2022 13:07:05 +0000 (21:07 +0800)]
target/mips: Fix SAT_S trans helper
Fix the SAT_S and SAT_U trans helper confusion.
Fixes:
4701d23aef ("target/mips: Convert MSA BIT instruction format to decodetree")
Signed-off-by: Ni Hui <shuizhuyuanluo@126.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220503130708.272850-1-shuizhuyuanluo@126.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Marcin Nowakowski [Wed, 26 May 2021 09:35:06 +0000 (11:35 +0200)]
target/mips: Fix WatchHi.M handling
bit 31 (M) of WatchHiN register is a read-only register indicating
whether the next WatchHi register is present. It must not be reset
during user writes to the register.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: David Daney <david.daney@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@fungible.com>
Message-Id: <
20220511212953.74738-1-philmd@fungible.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Richard Henderson [Sat, 11 Jun 2022 01:15:34 +0000 (18:15 -0700)]
Merge tag 'for_upstream' of git://git./virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key
5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 20:16:48 +0000 (13:16 -0700)]
Merge tag 'pull-target-arm-
20220610' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
* refactor exception routing code
* fix SCR_EL3 RAO/RAZ bits
* gdbstub: Don't use GDB syscalls if no GDB is attached
* semihosting/config: Merge --semihosting-config option groups
* tests/qtest: Reduce npcm7xx_sdhci test image size
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmKjbBoZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3iMGEACAA+c88ifpbMlqmDaxPArw
# pcUNbwAel9IzCMSb/SiX0JYyf6omGx84RfKQ7hoCGnn23L47tTcRwGDXkr0vOKLG
# +JUXvkIYO9Ylp0M/PnJFL90aO7B6uMGQVfK57yjn+URlchm+wzphI/6V1jGLMVk/
# UaUHCOW2jFWXxsiUnj3HTyh46T+ZPMMebv4ZEaMH41jZs8D8DrEM65UFmCaBljPB
# eEZPMRUClveosB6O9cj9qAHT5198Za7emzvsWie6AQFI/7TVxQ5oPf8QaeB74w28
# EypXlIlMvOqF0W3mE00IPAgi8f/PgB0X6iqiwXxo+nFwm3J6rPoxo7aI5psXHQn4
# uo2U9Ngvz/A2KVm+j7Qpgst70MScDJey7h1c4w//P8gjqLGL8OxJiyGz+rv+xLkd
# L9Q4gIRJ0FK6brOVZX5aRXMqsnDzVZ8Ki5b6tCoAnfNNAq5y8i3gOss/DDYTKmO0
# C4Ectuq65Qodp82EeMPW25UT1EouCQVDgD2VkaPumI3uVn6+XKDGpM36UOctPOXm
# 6RsGvJAWsV7k0llAKjrl8p+B+bCoT6hH41oFkpl96nJuTdx7tS3+OccvEINKZwT1
# rJ5q7IcwbMJwVTbZIJckDXvbTwcj/A9e0SqSOb7AbBiHuATUZxyRbwsQFpazigsa
# t7Lj+Y/obz5shrq3BsIlYQ==
# =yMh4
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 09:06:50 AM PDT
# gpg: using RSA key
E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-
20220610' of https://git.linaro.org/people/pmaydell/qemu-arm: (28 commits)
semihosting/config: Merge --semihosting-config option groups
gdbstub: Don't use GDB syscalls if no GDB is attached
target/arm: SCR_EL3.RW is RAO/WI without AArch32 EL[12]
target/arm: Adjust format test in scr_write
tests/qtest: Reduce npcm7xx_sdhci test image size
target/arm: Fix Secure PL1 tests in fp_exception_el
target/arm: Move arm_debug_target_el to debug_helper.c
target/arm: Create raise_exception_debug
target/arm: Remove default_exception_el
target/arm: Introduce helper_exception_with_syndrome
target/arm: Introduce gen_exception_el_v
target/arm: Introduce gen_exception
target/arm: Rename gen_exception to gen_exception_el
target/arm: Move gen_exception to translate.c
target/arm: Remove TBFLAG_ANY.DEBUG_TARGET_EL
target/arm: Create helper_exception_swstep
target/arm: Introduce gen_exception_insn
target/arm: Rename gen_exception_insn to gen_exception_insn_el
target/arm: Introduce gen_exception_insn_el_v
target/arm: Rename helper_exception_with_syndrome
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Fri, 10 Jun 2022 13:32:36 +0000 (14:32 +0100)]
semihosting/config: Merge --semihosting-config option groups
Currently we mishandle the --semihosting-config option if the
user specifies it on the command line more than once. For
example with:
--semihosting-config target=gdb --semihosting-config arg=foo,arg=bar
the function qemu_semihosting_config_options() is called twice, once
for each argument. But that function expects to be called only once,
and it always unconditionally sets the semihosting.enabled,
semihost_chardev and semihosting.target variables. This means that
if any of those options were set anywhere except the last
--semihosting-config option on the command line, those settings are
ignored. In the example above, 'target=gdb' in the first option is
overridden by an implied default 'target=auto' in the second.
The QemuOptsList machinery has a flag for handling this kind of
"option group is setting global state": by setting
.merge_lists = true;
we make the machinery merge all the --semihosting-config arguments
the user passes into a single set of options and call our
qemu_semihosting_config_options() just once.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id:
20220526190053.521505-3-peter.maydell@linaro.org
Peter Maydell [Fri, 10 Jun 2022 13:32:36 +0000 (14:32 +0100)]
gdbstub: Don't use GDB syscalls if no GDB is attached
In two places in gdbstub.c we look at gdbserver_state.init to decide
whether we're going to do a semihosting syscall via the gdb remote
protocol:
* when setting up, if the user didn't explicitly select either
native semihosting or gdb semihosting, we autoselect, with the
intended behaviour "use gdb if gdb is connected"
* when the semihosting layer attempts to do a syscall via gdb, we
silently ignore it if the gdbstub wasn't actually set up
However, if the user's commandline sets up the gdbstub but tells QEMU
to start rather than waiting for a GDB to connect (eg using '-s' but
not '-S'), then we will have gdbserver_state.init true but no actual
connection; an attempt to use gdb syscalls will then crash because we
try to use gdbserver_state.c_cpu when it hasn't been set up:
#0 0x00007ffff6803ba8 in qemu_cpu_kick (cpu=0x0) at ../../softmmu/cpus.c:457
#1 0x00007ffff6c03913 in gdb_do_syscallv (cb=0x7ffff6c19944 <common_semi_cb>,
fmt=0x7ffff7573b7e "", va=0x7ffff56294c0) at ../../gdbstub.c:2946
#2 0x00007ffff6c19c3a in common_semi_gdb_syscall (cs=0x7ffff83fe060,
cb=0x7ffff6c19944 <common_semi_cb>, fmt=0x7ffff7573b75 "isatty,%x")
at ../../semihosting/arm-compat-semi.c:494
#3 0x00007ffff6c1a064 in gdb_isattyfn (cs=0x7ffff83fe060, gf=0x7ffff86a3690)
at ../../semihosting/arm-compat-semi.c:636
#4 0x00007ffff6c1b20f in do_common_semihosting (cs=0x7ffff83fe060)
at ../../semihosting/arm-compat-semi.c:967
#5 0x00007ffff693a037 in handle_semihosting (cs=0x7ffff83fe060)
at ../../target/arm/helper.c:10316
You can probably also get into this state via some odd
corner cases involving connecting a GDB and then telling it
to detach from all the vCPUs.
Abstract out the test into a new gdb_attached() function
which returns true only if there's actually a GDB connected
to the debug stub and attached to at least one vCPU.
Reported-by: Liviu Ionescu <ilg@livius.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id:
20220526190053.521505-2-peter.maydell@linaro.org
Richard Henderson [Fri, 10 Jun 2022 13:32:35 +0000 (14:32 +0100)]
target/arm: SCR_EL3.RW is RAO/WI without AArch32 EL[12]
Since DDI0487F.a, the RW bit is RAO/WI. When specifically
targeting such a cpu, e.g. cortex-a76, it is legitimate to
ignore the bit within the secure monitor.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1062
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609214657.
1217913-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:35 +0000 (14:32 +0100)]
target/arm: Adjust format test in scr_write
Because reset always initializes the AA64 version, SCR_EL3,
test the mode of EL3 instead of the type of the cpreg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609214657.
1217913-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hao Wu [Fri, 10 Jun 2022 13:32:35 +0000 (14:32 +0100)]
tests/qtest: Reduce npcm7xx_sdhci test image size
Creating 1GB image for a simple qtest is unnecessary
and could lead to failures. We reduce the image size
to 1MB to reduce the test overhead.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id:
20220609214125.
4192212-1-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:35 +0000 (14:32 +0100)]
target/arm: Fix Secure PL1 tests in fp_exception_el
We were using arm_is_secure and is_a64, which are
tests against the current EL, as opposed to
arm_el_is_aa64 and arm_is_secure_below_el3, which
can be applied to a different EL than current.
Consolidate the two tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:35 +0000 (14:32 +0100)]
target/arm: Move arm_debug_target_el to debug_helper.c
This function is no longer used outside debug_helper.c.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:34 +0000 (14:32 +0100)]
target/arm: Create raise_exception_debug
Handle the debug vs current el exception test in one place.
Leave EXCP_BKPT alone, since that treats debug < current differently.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:34 +0000 (14:32 +0100)]
target/arm: Remove default_exception_el
This function is no longer used. At the same time, remove
DisasContext.secure_routed_to_el3, as it in turn becomes unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:34 +0000 (14:32 +0100)]
target/arm: Introduce helper_exception_with_syndrome
With the helper we can use exception_target_el at runtime,
instead of default_exception_el at translate time.
While we're at it, remove the DisasContext parameter from
gen_exception, as it is no longer used.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:34 +0000 (14:32 +0100)]
target/arm: Introduce gen_exception_el_v
Split out a common helper function for gen_exception_el
and gen_exception_insn_el_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:33 +0000 (14:32 +0100)]
target/arm: Introduce gen_exception
Create a new wrapper function that passes the default
exception target to gen_exception_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:33 +0000 (14:32 +0100)]
target/arm: Rename gen_exception to gen_exception_el
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:33 +0000 (14:32 +0100)]
target/arm: Move gen_exception to translate.c
This function is not required by any other translation file.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:33 +0000 (14:32 +0100)]
target/arm: Remove TBFLAG_ANY.DEBUG_TARGET_EL
We no longer need this value during translation,
as it is now handled within the helpers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:32 +0000 (14:32 +0100)]
target/arm: Create helper_exception_swstep
Move the computation from gen_swstep_exception into a helper.
This fixes a bug when:
- MDSCR_EL1.KDE == 1 to enable debug exceptions within EL_D itself
- we singlestep an ERET from EL_D to some lower EL
Previously we were computing 'same el' based on the EL which
executed the ERET instruction, whereas it ought to be computed
based on the EL to which ERET returned. This happens naturally
with the new helper, which runs after EL has been changed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:32 +0000 (14:32 +0100)]
target/arm: Introduce gen_exception_insn
Create a new wrapper function that passes the default
exception target to gen_exception_insn_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:32 +0000 (14:32 +0100)]
target/arm: Rename gen_exception_insn to gen_exception_insn_el
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:32 +0000 (14:32 +0100)]
target/arm: Introduce gen_exception_insn_el_v
Create a function below gen_exception_insn that takes
the target_el as a TCGv_i32, replacing gen_exception_el.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:31 +0000 (14:32 +0100)]
target/arm: Rename helper_exception_with_syndrome
Rename to helper_exception_with_syndrome_el, to emphasize
that the target el is a parameter.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:31 +0000 (14:32 +0100)]
target/arm: Move arm_debug_exception_fsr to debug_helper.c
This function now now only used in debug_helper.c, so there is
no reason to have a declaration in a header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:31 +0000 (14:32 +0100)]
target/arm: Move exception_bkpt_insn to debug_helper.c
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:31 +0000 (14:32 +0100)]
target/arm: Use is_a64 in arm_generate_debug_exceptions
Use the accessor rather than the raw structure member.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:31 +0000 (14:32 +0100)]
target/arm: Move arm_generate_debug_exceptions out of line
Move arm_generate_debug_exceptions and its two subroutines,
{aa32,aa64}_generate_debug_exceptions into debug_helper.c,
and the one interface declaration to internals.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:30 +0000 (14:32 +0100)]
target/arm: Move arm_singlestep_active out of line
Move the function to debug_helper.c, and the
declaration to internals.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:30 +0000 (14:32 +0100)]
target/arm: Move exception_target_el out of line
Move the function to op_helper.c, near raise_exception.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:30 +0000 (14:32 +0100)]
target/arm: Add coproc parameter to syn_fp_access_trap
With ARMv8, this field is always RES0.
With ARMv7, targeting EL2 and TA=0, it is always 0xA.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 13:32:30 +0000 (14:32 +0100)]
target/arm: Mark exception helpers as noreturn
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id:
20220609202901.
1177572-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson [Fri, 10 Jun 2022 05:08:27 +0000 (22:08 -0700)]
Merge tag 'pull-riscv-to-apply-
20220610' of github.com:alistair23/qemu into staging
Fourth RISC-V PR for QEMU 7.1
* Update MAINTAINERS
* Add support for Zmmul extension
* Fixup FDT errors when supplying device tree from the command line for virt machine
* Avoid overflowing the addr_config buffer in the SiFive PLIC
* Support -device loader addresses above 2GB
* Correctly wake from WFI on VS-level external interrupts
* Fixes for RV128 support
* Support Vector extension tail agnostic setting elements' bits to all 1s
* Don't expose the CPU properties on named CPUs
* Fix vector extension assert for RV32
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmKix74ACgkQIeENKd+X
# cFTKdgf8DP85Mf91+m1Dd1zji6d4JiFa+i7wer5T6la7qQAiIbyyq6kax0K31YYF
# QuX3x7i9erF8Z/kox3MlYjjytPS0iJK9+Fica1ttslBJLv/o2K7SAaLmUwS65AB5
# rHjRCWDdeA3zPv7tcHEIpYZNFb163N2ZYqhmTTmL6Q0KTaa73OWKuJIbJzB8iT85
# LH1cUTfCEWNzsG0PLAD4Xh4ug4Hq6sW54NXXMDZiDSVak/FdNSEzuUMUsNW12XA1
# ib1uhfygHGYfSXFUgYmCiHK7iEey7A9IZtGKdNIXObx1/QVOrvyW+E90XRQqEHHC
# XeOkdTUB2YfPsC0Qs4VVqsVEQVjUCw==
# =gz3H
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Jun 2022 09:25:34 PM PDT
# gpg: using RSA key
F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-
20220610' of github.com:alistair23/qemu: (25 commits)
target/riscv: trans_rvv: Avoid assert for RV32 and e64
target/riscv: Don't expose the CPU properties on names CPUs
target/riscv: rvv: Add option 'rvv_ta_all_1s' to enable optional tail agnostic behavior
target/riscv: rvv: Add tail agnostic for vector permutation instructions
target/riscv: rvv: Add tail agnostic for vector mask instructions
target/riscv: rvv: Add tail agnostic for vector reduction instructions
target/riscv: rvv: Add tail agnostic for vector floating-point instructions
target/riscv: rvv: Add tail agnostic for vector fix-point arithmetic instructions
target/riscv: rvv: Add tail agnostic for vector integer merge and move instructions
target/riscv: rvv: Add tail agnostic for vector integer comparison instructions
target/riscv: rvv: Add tail agnostic for vector integer shift instructions
target/riscv: rvv: Add tail agnostic for vx, vvm, vxm instructions
target/riscv: rvv: Add tail agnostic for vector load / store instructions
target/riscv: rvv: Add tail agnostic for vv instructions
target/riscv: rvv: Early exit when vstart >= vl
target/riscv: rvv: Rename ambiguous esz
target/riscv: rvv: Prune redundant access_type parameter passed
target/riscv: rvv: Prune redundant ESZ, DSZ parameter passed
target/riscv/debug.c: keep experimental rv128 support working
target/riscv: Wake on VS-level external interrupts
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Alistair Francis [Wed, 8 Jun 2022 23:47:01 +0000 (09:47 +1000)]
target/riscv: trans_rvv: Avoid assert for RV32 and e64
When running a 32-bit guest, with a e64 vmv.v.x and vl_eq_vlmax set to
true the `tcg_debug_assert(vece <= MO_32)` will be triggered inside
tcg_gen_gvec_dup_i32().
This patch checks that condition and instead uses tcg_gen_gvec_dup_i64()
is required.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1028
Suggested-by: Robert Bu <robert.bu@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <
20220608234701.369536-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Changpeng Liu [Wed, 25 May 2022 12:55:40 +0000 (20:55 +0800)]
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
Currently vhost-user-scsi driver doesn't allow to change
the configuration space of virtio_scsi, while vhost-user-blk
support that, so here we set the flag in vhost-user-blk driver
and unset it in vhost-user-scsi.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Message-Id: <
20220525125540.50979-2-changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Changpeng Liu [Wed, 25 May 2022 12:55:39 +0000 (20:55 +0800)]
hw/virtio/vhost-user: don't use uninitialized variable
Variable `vdev` in `struct vhost_dev` will not be ready
until start the device, so let's not use it for the error
output here.
Fixes:
5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported")
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Message-Id: <
20220525125540.50979-1-changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes:
5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported")
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes:
5653493 ("hw/virtio/vhost-user: don't suppress F_CONFIG when supported")
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Mark Cave-Ayland [Wed, 25 May 2022 17:32:32 +0000 (18:32 +0100)]
tests/acpi: virt: update golden masters for VIOT
Differences between disassembled ASL files for VIOT:
+++ /tmp/asl-V69GM1.dsl 2022-05-18 10:22:27.
239796759 +0100
@@ -36,11 +36,11 @@
[041h 0065 1] Reserved : 00
[042h 0066 2] Length : 0018
-[044h 0068 4] Endpoint start :
00003000
+[044h 0068 4] Endpoint start :
00001000
[048h 0072 2] PCI Segment start : 0000
[04Ah 0074 2] PCI Segment end : 0000
-[04Ch 0076 2] PCI BDF start : 3000
-[04Eh 0078 2] PCI BDF end : 30FF
+[04Ch 0076 2] PCI BDF start : 1000
+[04Eh 0078 2] PCI BDF end : 10FF
[050h 0080 2] Output node : 0030
[052h 0082 6] Reserved :
000000000000
@@ -48,11 +48,11 @@
[059h 0089 1] Reserved : 00
[05Ah 0090 2] Length : 0018
-[05Ch 0092 4] Endpoint start :
00001000
+[05Ch 0092 4] Endpoint start :
00003000
[060h 0096 2] PCI Segment start : 0000
[062h 0098 2] PCI Segment end : 0000
-[064h 0100 2] PCI BDF start : 1000
-[066h 0102 2] PCI BDF end : 10FF
+[064h 0100 2] PCI BDF start : 3000
+[066h 0102 2] PCI BDF end : 30FF
[068h 0104 2] Output node : 0030
[06Ah 0106 6] Reserved :
000000000000
@@ -62,6 +62,6 @@
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 03 00 30 00 00 00 00 00 00 00 00 00 // ......0.........
0030: 03 00 10 00 00 00 10 00 00 00 00 00 00 00 00 00 // ................
- 0040: 01 00 18 00 00 30 00 00 00 00 00 00 00 30 FF 30 // .....0.......0.0
- 0050: 30 00 00 00 00 00 00 00 01 00 18 00 00 10 00 00 // 0...............
- 0060: 00 00 00 00 00 10 FF 10 30 00 00 00 00 00 00 00 // ........0.......
+ 0040: 01 00 18 00 00 10 00 00 00 00 00 00 00 10 FF 10 // ................
+ 0050: 30 00 00 00 00 00 00 00 01 00 18 00 00 30 00 00 // 0............0..
+ 0060: 00 00 00 00 00 30 FF 30 30 00 00 00 00 00 00 00 // .....0.00.......
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220525173232.31429-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark Cave-Ayland [Wed, 25 May 2022 17:32:31 +0000 (18:32 +0100)]
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
This ensures that the VIOT ACPI table output is always stable for a given PCI
topology by ensuring that entries are ordered according to min_bus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220525173232.31429-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark Cave-Ayland [Wed, 25 May 2022 17:32:30 +0000 (18:32 +0100)]
tests/acpi: virt: allow VIOT acpi table changes
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220525173232.31429-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark Cave-Ayland [Wed, 25 May 2022 17:32:29 +0000 (18:32 +0100)]
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
Perform the generation of the VIOT ACPI table in 2 separate passes: the first pass
enumerates all of the PCI host bridges and adds the min_bus and max_bus information
to an array.
Once this is done the VIOT table header is generated using the size of the array
to calculate the node count, which means it is no longer necessary to use a
sub-array to hold the PCI host bridge range information along with viommu_off.
Finally the PCI host bridge array is iterated again to add the required entries
to the final VIOT ACPI table.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220525173232.31429-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark Cave-Ayland [Wed, 25 May 2022 17:32:28 +0000 (18:32 +0100)]
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
Instead of generating each table entry inline, move the individual PCI host bridge
table entry generation to a separate build_pci_host_range() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220525173232.31429-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark Cave-Ayland [Wed, 25 May 2022 17:32:27 +0000 (18:32 +0100)]
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
This is in preparation for separating out the VIOT ACPI table build from the
PCI host bridge numeration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <
20220525173232.31429-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Wed, 8 Jun 2022 13:08:04 +0000 (14:08 +0100)]
hw/cxl: Fix missing write mask for HDM decoder target list registers
Without being able to write these registers, no interleaving is possible.
More refined checks of HDM register state on commit to follow.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <
20220608130804.25795-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Claudio Fontana [Tue, 31 May 2022 11:47:07 +0000 (13:47 +0200)]
pci: fix overflow in snprintf string formatting
the code in pcibus_get_fw_dev_path contained the potential for a
stack buffer overflow of 1 byte, potentially writing to the stack an
extra NUL byte.
This overflow could happen if the PCI slot is >= 0x10000000,
and the PCI function is >= 0x10000000, due to the size parameter
of snprintf being incorrectly calculated in the call:
if (PCI_FUNC(d->devfn))
snprintf(path + off, sizeof(path) + off, ",%x", PCI_FUNC(d->devfn));
since the off obtained from a previous call to snprintf is added
instead of subtracted from the total available size of the buffer.
Without the accurate size guard from snprintf, we end up writing in the
worst case:
name (32) + "@" (1) + SLOT (8) + "," (1) + FUNC (8) + term NUL (1) = 51 bytes
In order to provide something more robust, replace all of the code in
pcibus_get_fw_dev_path with a single call to g_strdup_printf,
so there is no need to rely on manual calculations.
Found by compiling QEMU with FORTIFY_SOURCE=3 as the error:
*** buffer overflow detected ***: terminated
Thread 1 "qemu-system-x86" received signal SIGABRT, Aborted.
[Switching to Thread 0x7ffff642c380 (LWP 121307)]
0x00007ffff71ff55c in __pthread_kill_implementation () from /lib64/libc.so.6
(gdb) bt
#0 0x00007ffff71ff55c in __pthread_kill_implementation () at /lib64/libc.so.6
#1 0x00007ffff71ac6f6 in raise () at /lib64/libc.so.6
#2 0x00007ffff7195814 in abort () at /lib64/libc.so.6
#3 0x00007ffff71f279e in __libc_message () at /lib64/libc.so.6
#4 0x00007ffff729767a in __fortify_fail () at /lib64/libc.so.6
#5 0x00007ffff7295c36 in () at /lib64/libc.so.6
#6 0x00007ffff72957f5 in __snprintf_chk () at /lib64/libc.so.6
#7 0x0000555555b1c1fd in pcibus_get_fw_dev_path ()
#8 0x0000555555f2bde4 in qdev_get_fw_dev_path_helper.constprop ()
#9 0x0000555555f2bd86 in qdev_get_fw_dev_path_helper.constprop ()
#10 0x00005555559a6e5d in get_boot_device_path ()
#11 0x00005555559a712c in get_boot_devices_list ()
#12 0x0000555555b1a3d0 in fw_cfg_machine_reset ()
#13 0x0000555555bf4c2d in pc_machine_reset ()
#14 0x0000555555c66988 in qemu_system_reset ()
#15 0x0000555555a6dff6 in qdev_machine_creation_done ()
#16 0x0000555555c79186 in qmp_x_exit_preconfig.part ()
#17 0x0000555555c7b459 in qemu_init ()
#18 0x0000555555960a29 in main ()
Found-by: Dario Faggioli <Dario Faggioli <dfaggioli@suse.com>
Found-by: Martin Liška <martin.liska@suse.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <
20220531114707.18830-1-cfontana@suse.de>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Jonathan Cameron [Wed, 8 Jun 2022 14:54:40 +0000 (15:54 +0100)]
hw/machine: Drop cxl_supported flag as no longer useful
As all the CXL elements have moved to boards that support
CXL, there is no need to maintain a top level flag.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <
20220608145440.26106-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Wed, 8 Jun 2022 14:54:39 +0000 (15:54 +0100)]
hw/cxl: Move the CXLState from MachineState to machine type specific state.
This removes the last of the CXL code from the MachineState where it
is visible to all Machines to only those that support CXL (currently i386/pc)
As i386/pc always support CXL now, stop allocating the state independently.
Note the pxb register hookup code runs even if cxl=off in order to detect
pxb_cxl host bridges and fail to start if any are present as they won't
have the control registers available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <
20220608145440.26106-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Wed, 8 Jun 2022 14:54:38 +0000 (15:54 +0100)]
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
The CEDT table includes addreses of host bridge registers.
There are allocated in a different order due to the previous
patch, so update to the table is needed.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <
20220608145440.26106-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Wed, 8 Jun 2022 14:54:37 +0000 (15:54 +0100)]
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
As the CXLState will no long be accessible via MachineState
at time of PXB_CXL realization, come back later from the machine specific
code to fill in the missing memory region setup. Only at this stage
is it possible to check if cxl=on, so that check is moved to this
later point.
Note that for multiple host bridges, the allocation order of the
register spaces is changed. This will be reflected in ACPI CEDT.
Stubs are added to handle case of CONFIG_PXB=n for machines that
call these functions.
The bus walking logic is common to all machines so add a utility
function + stub to cxl-host*.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <
20220608145440.26106-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Wed, 8 Jun 2022 14:54:36 +0000 (15:54 +0100)]
tests/acpi: Allow modification of q35 CXL CEDT table.
Needed to allow memory address changes as a result of next patch.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <
20220608145440.26106-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Wed, 8 Jun 2022 14:54:35 +0000 (15:54 +0100)]
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
Whilst here take the oportunity to shorten the function name.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <
20220608145440.26106-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Wed, 8 Jun 2022 14:54:34 +0000 (15:54 +0100)]
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
Refactoring step on path to moving all CXL state out of
MachineState.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Message-Id: <
20220608145440.26106-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jonathan Cameron [Wed, 8 Jun 2022 14:54:33 +0000 (15:54 +0100)]
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
Paolo Bonzini requested this change to simplify the ongoing
effort to allow machine setup entirely via RPC.
Includes shortening the command line form cxl-fixed-memory-window
to cxl-fmw as the command lines are extremely long even with this
change.
The json change is needed to ensure that there is
a CXLFixedMemoryWindowOptionsList even though the actual
element in the json is never used. Similar to existing
SgxEpcProperties.
Update qemu-options.hx to reflect that this is now a -machine
parameter. The bulk of -M / -machine parameters are documented
under machine, so use that in preference to M.
Update cxl-test and bios-tables-test to reflect new parameters.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Message-Id: <
20220608145440.26106-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:40 +0000 (09:53 -0400)]
x86: acpi-build: do not include hw/isa/isa.h directly
the last remaining dependency on ISA in acpi-build.c
is iapc_boot_arch_8042() which pulls in in isa.h
in its own header hw/input/i8042.h. Clean up
not longer needed direct inclusion of isa.h in
acpi-build.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20220608135340.
3304695-36-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:39 +0000 (09:53 -0400)]
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
expected move of tmp-tis device description directly under
Device(ISA) node.
for tpm-tis 2.0:
@@ -145,6 +145,189 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Name (_ADR, 0x001F0000) // _ADR: Address
OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+ Device (TPM)
+ {
+ Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID
+ Name (_STR, "TPM 2.0 Device") // _STR: Description String
+ Name (_UID, One) // _UID: Unique ID
+ Name (_STA, 0x0F) // _STA: Status
...
+ }
@@ -3281,189 +3464,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
Method (PCNT, 0, NotSerialized)
{
}
-
- Device (TPM)
- {
- Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID
- Name (_STR, "TPM 2.0 Device") // _STR: Description String
- Name (_UID, One) // _UID: Unique ID
- Name (_STA, 0x0F) // _STA: Status
...
- }
for tpm-tis 1.2:
@@ -145,6 +145,188 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Name (_ADR, 0x001F0000) // _ADR: Address
OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+ Device (TPM)
+ {
+ Name (_HID, EisaId ("PNP0C31")) // _HID: Hardware ID
+ Name (_UID, One) // _UID: Unique ID
+ Name (_STA, 0x0F) // _STA: Status
...
+ }
@@ -3281,188 +3463,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
Method (PCNT, 0, NotSerialized)
{
}
-
- Device (ISA.TPM)
- {
- Name (_HID, EisaId ("PNP0C31")) // _HID: Hardware ID
- Name (_UID, One) // _UID: Unique ID
- Name (_STA, 0x0F) // _STA: Status
...
- }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <
20220608135340.
3304695-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:38 +0000 (09:53 -0400)]
acpi: tpm-tis: use AcpiDevAmlIfClass:build_dev_aml to provide device's AML
.. and clean up not longer needed conditionals in DSTD build code
tpm-tis AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20220608135340.
3304695-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:37 +0000 (09:53 -0400)]
acpi: pc/q35: remove not needed 'if' condition on pci bus
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20220608135340.
3304695-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:36 +0000 (09:53 -0400)]
acpi: pc/q35: tpm-tis: fix TPM device scope
tpm-tis 2.0, is not a PCI device but ISA one, move it
under ISA scope to fix incorrect placement.
Fixes:
24cf5413aa0 (acpi: Make TPM 2.0 with TIS available as MSFT0101)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20220608135340.
3304695-32-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:35 +0000 (09:53 -0400)]
tests: acpi: white-list DSDT.tis.tpm2/DSDT.tis.tpm12 expected blobs
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <
20220608135340.
3304695-31-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:34 +0000 (09:53 -0400)]
tests: acpi: update expected DSDT.pvpanic-isa blob
@@ -145,6 +145,37 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Name (_ADR, 0x001F0000) // _ADR: Address
OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+ Device (PEVT)
+ {
+ Name (_HID, "QEMU0001") // _HID: Hardware ID
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ IO (Decode16,
+ 0x0505, // Range Minimum
+ 0x0505, // Range Maximum
+ 0x01, // Alignment
+ 0x01, // Length
+ )
+ })
+ OperationRegion (PEOR, SystemIO, 0x0505, One)
+ Field (PEOR, ByteAcc, NoLock, Preserve)
+ {
+ PEPT, 8
+ }
+
+ Name (_STA, 0x0F) // _STA: Status
+ Method (RDPT, 0, NotSerialized)
+ {
+ Local0 = PEPT /* \_SB_.PCI0.ISA_.PEVT.PEPT */
+ Return (Local0)
+ }
+
+ Method (WRPT, 1, NotSerialized)
+ {
+ PEPT = Arg0
+ }
+ }
+
Device (KBD)
{
Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID
@@ -3246,40 +3277,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
}
}
- Scope (\_SB.PCI0.ISA)
- {
- Device (PEVT)
- {
- Name (_HID, "QEMU0001") // _HID: Hardware ID
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
- {
- IO (Decode16,
- 0x0505, // Range Minimum
- 0x0505, // Range Maximum
- 0x01, // Alignment
- 0x01, // Length
- )
- })
- OperationRegion (PEOR, SystemIO, 0x0505, One)
- Field (PEOR, ByteAcc, NoLock, Preserve)
- {
- PEPT, 8
- }
-
- Name (_STA, 0x0F) // _STA: Status
- Method (RDPT, 0, NotSerialized)
- {
- Local0 = PEPT /* \_SB_.PCI0.ISA_.PEVT.PEPT */
- Return (Local0)
- }
-
- Method (WRPT, 1, NotSerialized)
- {
- PEPT = Arg0
- }
- }
- }
-
Scope (\_SB)
{
Scope (PCI0)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
20220608135340.
3304695-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:33 +0000 (09:53 -0400)]
acpi: pvpanic-isa: use AcpiDevAmlIfClass:build_dev_aml to provide device's AML
.. and clean up not longer needed conditionals in DSTD build code
pvpanic-isa AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20220608135340.
3304695-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:32 +0000 (09:53 -0400)]
tests: acpi: add pvpanic-isa: testcase
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <
20220608135340.
3304695-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Igor Mammedov [Wed, 8 Jun 2022 13:53:31 +0000 (09:53 -0400)]
tests: acpi: white-lists expected DSDT.pvpanic-isa blob
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <
20220608135340.
3304695-27-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>