OSDN Git Service
Jiri Olsa [Tue, 10 May 2022 12:26:16 +0000 (14:26 +0200)]
selftests/bpf: Add attach bench test
Adding test that reads all functions from ftrace available_filter_functions
file and attach them all through kprobe_multi API.
It also prints stats info with -v option, like on my setup:
test_bench_attach: found 48712 functions
test_bench_attach: attached in 1.069s
test_bench_attach: detached in 0.373s
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Tue, 10 May 2022 12:26:15 +0000 (14:26 +0200)]
bpf: Resolve symbols with ftrace_lookup_symbols for kprobe multi link
Using kallsyms_lookup_names function to speed up symbols lookup in
kprobe multi link attachment and replacing with it the current
kprobe_multi_resolve_syms function.
This speeds up bpftrace kprobe attachment:
# perf stat -r 5 -e cycles ./src/bpftrace -e 'kprobe:x* { } i:ms:1 { exit(); }'
...
6.5681 +- 0.0225 seconds time elapsed ( +- 0.34% )
After:
# perf stat -r 5 -e cycles ./src/bpftrace -e 'kprobe:x* { } i:ms:1 { exit(); }'
...
0.5661 +- 0.0275 seconds time elapsed ( +- 4.85% )
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Tue, 10 May 2022 12:26:14 +0000 (14:26 +0200)]
fprobe: Resolve symbols with ftrace_lookup_symbols
Using ftrace_lookup_symbols to speed up symbols lookup
in register_fprobe_syms API.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Tue, 10 May 2022 12:26:13 +0000 (14:26 +0200)]
ftrace: Add ftrace_lookup_symbols function
Adding ftrace_lookup_symbols function that resolves array of symbols
with single pass over kallsyms.
The user provides array of string pointers with count and pointer to
allocated array for resolved values.
int ftrace_lookup_symbols(const char **sorted_syms, size_t cnt,
unsigned long *addrs)
It iterates all kallsyms symbols and tries to loop up each in provided
symbols array with bsearch. The symbols array needs to be sorted by
name for this reason.
We also check each symbol to pass ftrace_location, because this API
will be used for fprobe symbols resolving.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Tue, 10 May 2022 12:26:12 +0000 (14:26 +0200)]
kallsyms: Make kallsyms_on_each_symbol generally available
Making kallsyms_on_each_symbol generally available, so it can be
used outside CONFIG_LIVEPATCH option in following changes.
Rather than adding another ifdef option let's make the function
generally available (when CONFIG_KALLSYMS option is defined).
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220510122616.2652285-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Tue, 10 May 2022 18:20:45 +0000 (11:20 -0700)]
Merge branch 'bpf: bpf link iterator'
Dmitrii Dolgov says:
====================
Bpf links seem to be one of the important structures for which no
iterator is provided. Such iterator could be useful in those cases when
generic 'task/file' is not suitable or better performance is needed.
The implementation is mostly copied from prog iterator. This time tests were
executed, although I still had to exclude test_bpf_nf (failed to find BTF info
for global/extern symbol 'bpf_skb_ct_lookup') -- since it's unrelated, I hope
it's a minor issue.
Per suggestion from the previous discussion, there is a new patch for
converting CHECK to corresponding ASSERT_* macro. Such replacement is done only
if the final result would be the same, e.g. CHECK with important-looking custom
formatting strings are still in place -- from what I understand ASSERT_*
doesn't allow to specify such format.
The third small patch fixes what looks like a copy-paste error in the condition
checking.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dmitrii Dolgov [Tue, 10 May 2022 15:52:33 +0000 (17:52 +0200)]
selftests/bpf: Add bpf link iter test
Add a simple test for bpf link iterator
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20220510155233.9815-5-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dmitrii Dolgov [Tue, 10 May 2022 15:52:32 +0000 (17:52 +0200)]
selftests/bpf: Use ASSERT_* instead of CHECK
Replace usage of CHECK with a corresponding ASSERT_* macro for bpf_iter
tests. Only done if the final result is equivalent, no changes when
replacement means loosing some information, e.g. from formatting string.
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20220510155233.9815-4-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dmitrii Dolgov [Tue, 10 May 2022 15:52:31 +0000 (17:52 +0200)]
selftests/bpf: Fix result check for test_bpf_hash_map
The original condition looks like a typo, verify the skeleton loading
result instead.
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20220510155233.9815-3-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dmitrii Dolgov [Tue, 10 May 2022 15:52:30 +0000 (17:52 +0200)]
bpf: Add bpf_link iterator
Implement bpf_link iterator to traverse links via bpf_seq_file
operations. The changeset is mostly shamelessly copied from
commit
a228a64fc1e4 ("bpf: Add bpf_prog iterator")
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220510155233.9815-2-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Tue, 10 May 2022 17:49:03 +0000 (10:49 -0700)]
Merge branch 'Add source ip in bpf tunnel key'
Kaixi Fan says:
====================
From: Kaixi Fan <fankaixi.li@bytedance.com>
Now bpf code could not set tunnel source ip address of ip tunnel. So it
could not support flow based tunnel mode completely. Because flow based
tunnel mode could set tunnel source, destination ip address and tunnel
key simultaneously.
Flow based tunnel is useful for overlay networks. And by configuring tunnel
source ip address, user could make their networks more elastic.
For example, tunnel source ip could be used to select different egress
nic interface for different flows with same tunnel destination ip. Another
example, user could choose one of multiple ip address of the egress nic
interface as the packet's tunnel source ip.
Add tunnel and tunnel source testcases in test_progs. Other types of
tunnel testcases would be moved to test_progs step by step in the
future.
v6:
- use libbpf api to attach tc progs and remove some shell commands to reduce
test runtime based on Alexei Starovoitov's suggestion
v5:
- fix some code format errors
- use bpf kernel code at namespace at_ns0 to set tunnel metadata
v4:
- fix subject error of first patch
v3:
- move vxlan tunnel testcases to test_progs
- replace bpf_trace_printk with bpf_printk
- rename bpf kernel prog section name to tic
v2:
- merge vxlan tunnel and tunnel source ip testcases in test_tunnel.sh
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kaixi Fan [Sat, 30 Apr 2022 07:48:44 +0000 (15:48 +0800)]
selftests/bpf: Replace bpf_trace_printk in tunnel kernel code
Replace bpf_trace_printk with bpf_printk in test_tunnel_kern.c.
function bpf_printk is more easier and useful than bpf_trace_printk.
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Link: https://lore.kernel.org/r/20220430074844.69214-4-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kaixi Fan [Sat, 30 Apr 2022 07:48:43 +0000 (15:48 +0800)]
selftests/bpf: Move vxlan tunnel testcases to test_progs
Move vxlan tunnel testcases from test_tunnel.sh to test_progs.
And add vxlan tunnel source testcases also. Other tunnel testcases
will be moved to test_progs step by step in the future.
Rename bpf program section name as SEC("tc") because test_progs
bpf loader could not load sections with name SEC("gre_set_tunnel").
Because of this, add bpftool to load bpf programs in test_tunnel.sh.
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Link: https://lore.kernel.org/r/20220430074844.69214-3-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kaixi Fan [Sat, 30 Apr 2022 07:48:42 +0000 (15:48 +0800)]
bpf: Add source ip in "struct bpf_tunnel_key"
Add tunnel source ip field in "struct bpf_tunnel_key". Add related code
to set and get tunnel source field.
Signed-off-by: Kaixi Fan <fankaixi.li@bytedance.com>
Link: https://lore.kernel.org/r/20220430074844.69214-2-fankaixi.li@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KP Singh [Mon, 9 May 2022 21:49:05 +0000 (21:49 +0000)]
bpftool: bpf_link_get_from_fd support for LSM programs in lskel
bpf_link_get_from_fd currently returns a NULL fd for LSM programs.
LSM programs are similar to tracing programs and can also use
skel_raw_tracepoint_open.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220509214905.3754984-1-kpsingh@kernel.org
Takshak Chahande [Tue, 10 May 2022 08:22:21 +0000 (01:22 -0700)]
selftests/bpf: Handle batch operations for map-in-map bpf-maps
This patch adds up test cases that handles 4 combinations:
a) outer map: BPF_MAP_TYPE_ARRAY_OF_MAPS
inner maps: BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_HASH
b) outer map: BPF_MAP_TYPE_HASH_OF_MAPS
inner maps: BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_HASH
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220510082221.2390540-2-ctakshak@fb.com
Takshak Chahande [Tue, 10 May 2022 08:22:20 +0000 (01:22 -0700)]
bpf: Extend batch operations for map-in-map bpf-maps
This patch extends batch operations support for map-in-map map-types:
BPF_MAP_TYPE_HASH_OF_MAPS and BPF_MAP_TYPE_ARRAY_OF_MAPS
A usecase where outer HASH map holds hundred of VIP entries and its
associated reuse-ports per VIP stored in REUSEPORT_SOCKARRAY type
inner map, needs to do batch operation for performance gain.
This patch leverages the exiting generic functions for most of the batch
operations. As map-in-map's value contains the actual reference of the inner map,
for BPF_MAP_TYPE_HASH_OF_MAPS type, it needed an extra step to fetch the
map_id from the reference value.
selftests are added in next patch 2/2.
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220510082221.2390540-1-ctakshak@fb.com
Tiezhu Yang [Tue, 10 May 2022 03:35:03 +0000 (11:35 +0800)]
bpf: Print some info if disable bpf_jit_enable failed
A user told me that bpf_jit_enable can be disabled on one system, but he
failed to disable bpf_jit_enable on the other system:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
bash: echo: write error: Invalid argument
No useful info is available through the dmesg log, a quick analysis shows
that the issue is related with CONFIG_BPF_JIT_ALWAYS_ON.
When CONFIG_BPF_JIT_ALWAYS_ON is enabled, bpf_jit_enable is permanently set
to 1 and setting any other value than that will return failure.
It is better to print some info to tell the user if disable bpf_jit_enable
failed.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1652153703-22729-3-git-send-email-yangtiezhu@loongson.cn
Tiezhu Yang [Tue, 10 May 2022 03:35:02 +0000 (11:35 +0800)]
net: sysctl: Use SYSCTL_TWO instead of &two
It is better to use SYSCTL_TWO instead of &two, and then we can
remove the variable "two" in net/core/sysctl_net_core.c.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1652153703-22729-2-git-send-email-yangtiezhu@loongson.cn
Yuntao Wang [Thu, 5 May 2022 07:01:14 +0000 (15:01 +0800)]
bpf: Remove unused parameter from find_kfunc_desc_btf()
The func_id parameter in find_kfunc_desc_btf() is not used, get rid of it.
Fixes:
2357672c54c3 ("bpf: Introduce BPF support for kernel module function calls")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20220505070114.3522522-1-ytcoode@gmail.com
Jason Wang [Mon, 9 May 2022 09:02:47 +0000 (17:02 +0800)]
bpftool: Declare generator name
Most code generators declare its name so did this for bfptool.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220509090247.5457-1-jasowang@redhat.com
Jerome Marchand [Sat, 7 May 2022 16:16:35 +0000 (18:16 +0200)]
samples: bpf: Don't fail for a missing VMLINUX_BTF when VMLINUX_H is provided
samples/bpf build currently always fails if it can't generate
vmlinux.h from vmlinux, even when vmlinux.h is directly provided by
VMLINUX_H variable, which makes VMLINUX_H pointless.
Only fails when neither method works.
Fixes:
384b6b3bbf0d ("samples: bpf: Add vmlinux.h generation support")
Reported-by: CKI Project <cki-project@redhat.com>
Reported-by: Veronika Kabatova <vkabatov@redhat.com>
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220507161635.2219052-1-jmarchan@redhat.com
Andrii Nakryiko [Tue, 10 May 2022 00:16:05 +0000 (17:16 -0700)]
Merge branch 'bpftool: fix feature output when helper probes fail'
Milan Landaverde says:
====================
Currently in bpftool's feature probe, we incorrectly tell the user that
all of the helper functions are supported for program types where helper
probing fails or is explicitly unsupported[1]:
$ bpftool feature probe
...
eBPF helpers supported for program type tracing:
- bpf_map_lookup_elem
- bpf_map_update_elem
- bpf_map_delete_elem
...
- bpf_redirect_neigh
- bpf_check_mtu
- bpf_sys_bpf
- bpf_sys_close
This patch adjusts bpftool to relay to the user when helper support
can't be determined:
$ bpftool feature probe
...
eBPF helpers supported for program type lirc_mode2:
Program type not supported
eBPF helpers supported for program type tracing:
Could not determine which helpers are available
eBPF helpers supported for program type struct_opts:
Could not determine which helpers are available
eBPF helpers supported for program type ext:
Could not determine which helpers are available
Rather than imply that no helpers are available for the program type, we
let the user know that helper function probing failed entirely.
[1] https://lore.kernel.org/bpf/
20211217171202.
3352835-2-andrii@kernel.org/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Milan Landaverde [Wed, 4 May 2022 16:13:32 +0000 (12:13 -0400)]
bpftool: Output message if no helpers found in feature probing
Currently in libbpf, we have hardcoded program types that are not
supported for helper function probing (e.g. tracing, ext, lsm).
Due to this (and other legitimate failures), bpftool feature probe returns
empty for those program type helper functions.
Instead of implying to the user that there are no helper functions
available for a program type, we output a message to the user explaining
that helper function probing failed for that program type.
Signed-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220504161356.3497972-3-milan@mdaverde.com
Milan Landaverde [Wed, 4 May 2022 16:13:31 +0000 (12:13 -0400)]
bpftool: Adjust for error codes from libbpf probes
Originally [1], libbpf's (now deprecated) probe functions returned a bool
to acknowledge support but the new APIs return an int with a possible
negative error code to reflect probe failure. This change decides for
bpftool to declare maps and helpers are not available on probe failures.
[1]: https://lore.kernel.org/bpf/
20220202225916.
3313522-3-andrii@kernel.org/
Signed-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220504161356.3497972-2-milan@mdaverde.com
Andrii Nakryiko [Mon, 9 May 2022 00:41:48 +0000 (17:41 -0700)]
selftests/bpf: Test libbpf's ringbuf size fix up logic
Make sure we always excercise libbpf's ringbuf map size adjustment logic
by specifying non-zero size that's definitely not a page size multiple.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-10-andrii@kernel.org
Andrii Nakryiko [Mon, 9 May 2022 00:41:47 +0000 (17:41 -0700)]
libbpf: Automatically fix up BPF_MAP_TYPE_RINGBUF size, if necessary
Kernel imposes a pretty particular restriction on ringbuf map size. It
has to be a power-of-2 multiple of page size. While generally this isn't
hard for user to satisfy, sometimes it's impossible to do this
declaratively in BPF source code or just plain inconvenient to do at
runtime.
One such example might be BPF libraries that are supposed to work on
different architectures, which might not agree on what the common page
size is.
Let libbpf find the right size for user instead, if it turns out to not
satisfy kernel requirements. If user didn't set size at all, that's most
probably a mistake so don't upsize such zero size to one full page,
though. Also we need to be careful about not overflowing __u32
max_entries.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-9-andrii@kernel.org
Andrii Nakryiko [Mon, 9 May 2022 00:41:46 +0000 (17:41 -0700)]
libbpf: Provide barrier() and barrier_var() in bpf_helpers.h
Add barrier() and barrier_var() macros into bpf_helpers.h to be used by
end users. While a bit advanced and specialized instruments, they are
sometimes indispensable. Instead of requiring each user to figure out
exact asm volatile incantations for themselves, provide them from
bpf_helpers.h.
Also remove conflicting definitions from selftests. Some tests rely on
barrier_var() definition being nothing, those will still work as libbpf
does the #ifndef/#endif guarding for barrier() and barrier_var(),
allowing users to redefine them, if necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-8-andrii@kernel.org
Andrii Nakryiko [Mon, 9 May 2022 00:41:45 +0000 (17:41 -0700)]
selftests/bpf: Add bpf_core_field_offset() tests
Add test cases for bpf_core_field_offset() helper.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-7-andrii@kernel.org
Andrii Nakryiko [Mon, 9 May 2022 00:41:44 +0000 (17:41 -0700)]
libbpf: Complete field-based CO-RE helpers with field offset helper
Add bpf_core_field_offset() helper to complete field-based CO-RE
helpers. This helper can be useful for feature-detection and for some
more advanced cases of field reading (e.g., reading flexible array members).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-6-andrii@kernel.org
Andrii Nakryiko [Mon, 9 May 2022 00:41:43 +0000 (17:41 -0700)]
selftests/bpf: Use both syntaxes for field-based CO-RE helpers
Excercise both supported forms of bpf_core_field_exists() and
bpf_core_field_size() helpers: variable-based field reference and
type/field name-based one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-5-andrii@kernel.org
Andrii Nakryiko [Mon, 9 May 2022 00:41:42 +0000 (17:41 -0700)]
libbpf: Improve usability of field-based CO-RE helpers
Allow to specify field reference in two ways:
- if user has variable of necessary type, they can use variable-based
reference (my_var.my_field or my_var_ptr->my_field). This was the
only supported syntax up till now.
- now, bpf_core_field_exists() and bpf_core_field_size() support also
specifying field in a fashion similar to offsetof() macro, by
specifying type of the containing struct/union separately and field
name separately: bpf_core_field_exists(struct my_type, my_field).
This forms is quite often more convenient in practice and it matches
type-based CO-RE helpers that support specifying type by its name
without requiring any variables.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-4-andrii@kernel.org
Andrii Nakryiko [Mon, 9 May 2022 00:41:41 +0000 (17:41 -0700)]
libbpf: Make __kptr and __kptr_ref unconditionally use btf_type_tag() attr
It will be annoying and surprising for users of __kptr and __kptr_ref if
libbpf silently ignores them just because Clang used for compilation
didn't support btf_type_tag(). It's much better to get clear compiler
error than debug BPF verifier failures later on.
Fixes:
ef89654f2bc7 ("libbpf: Add kptr type tag macros to bpf_helpers.h")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-3-andrii@kernel.org
Andrii Nakryiko [Mon, 9 May 2022 00:41:40 +0000 (17:41 -0700)]
selftests/bpf: Prevent skeleton generation race
Prevent "classic" and light skeleton generation rules from stomping on
each other's toes due to the use of the same <obj>.linked{1,2,3}.o
naming pattern. There is no coordination and synchronizataion between
.skel.h and .lskel.h rules, so they can easily overwrite each other's
intermediate object files, leading to errors like:
/bin/sh: line 1: 170928 Bus error (core dumped)
/data/users/andriin/linux/tools/testing/selftests/bpf/tools/sbin/bpftool gen skeleton
/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.linked3.o
name test_ksyms_weak
> /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h
make: *** [Makefile:507: /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h] Error 135
make: *** Deleting file '/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h'
Fix by using different suffix for light skeleton rule.
Fixes:
c48e51c8b07a ("bpf: selftests: Add selftests for module kfunc support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-2-andrii@kernel.org
Mykola Lysenko [Thu, 28 Apr 2022 22:57:44 +0000 (15:57 -0700)]
selftests/bpf: Fix two memory leaks in prog_tests
Fix log_fp memory leak in dispatch_thread_read_log.
Remove obsolete log_fp clean-up code in dispatch_thread.
Also, release memory of subtest_selector. This can be
reproduced with -n 2/1 parameters.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220428225744.1961643-1-mykolal@fb.com
Alexei Starovoitov [Fri, 29 Apr 2022 03:03:30 +0000 (20:03 -0700)]
Merge branch 'libbpf: allow to opt-out from BPF map creation'
Andrii Nakryiko says:
====================
Add bpf_map__set_autocreate() API which is a BPF map counterpart of
bpf_program__set_autoload() and serves similar goal of allowing to build more
flexible CO-RE applications. See patch #3 for example scenarios in which the
need for such API came up previously.
Patch #1 is a follow-up patch to previous patch set adding verifier log fixup
logic, making sure bpf_core_format_spec()'s return result is used for
something useful.
Patch #2 is a small refactoring to avoid unnecessary verbose memory management
around obj->maps array.
Patch #3 adds and API and corresponding BPF verifier log fix up logic to
provide human-comprehensible error message with useful details.
Patch #4 adds a simple selftest validating both the API itself and libbpf's
log fixup logic for it.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Thu, 28 Apr 2022 04:15:23 +0000 (21:15 -0700)]
selftests/bpf: Test bpf_map__set_autocreate() and related log fixup logic
Add a subtest that excercises bpf_map__set_autocreate() API and
validates that libbpf properly fixes up BPF verifier log with correct
map information.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-5-andrii@kernel.org
Andrii Nakryiko [Thu, 28 Apr 2022 04:15:22 +0000 (21:15 -0700)]
libbpf: Allow to opt-out from creating BPF maps
Add bpf_map__set_autocreate() API that allows user to opt-out from
libbpf automatically creating BPF map during BPF object load.
This is a useful feature when building CO-RE-enabled BPF application
that takes advantage of some new-ish BPF map type (e.g., socket-local
storage) if kernel supports it, but otherwise uses some alternative way
(e.g., extra HASH map). In such case, being able to disable the creation
of a map that kernel doesn't support allows to successfully create and
load BPF object file with all its other maps and programs.
It's still up to user to make sure that no "live" code in any of their BPF
programs are referencing such map instance, which can be achieved by
guarding such code with CO-RE relocation check or by using .rodata
global variables.
If user fails to properly guard such code to turn it into "dead code",
libbpf will helpfully post-process BPF verifier log and will provide
more meaningful error and map name that needs to be guarded properly. As
such, instead of:
; value = bpf_map_lookup_elem(&missing_map, &zero);
4: (85) call unknown#
2001000000
invalid func unknown#
2001000000
... user will see:
; value = bpf_map_lookup_elem(&missing_map, &zero);
4: <invalid BPF map reference>
BPF map 'missing_map' is referenced but wasn't created
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-4-andrii@kernel.org
Andrii Nakryiko [Thu, 28 Apr 2022 04:15:21 +0000 (21:15 -0700)]
libbpf: Use libbpf_mem_ensure() when allocating new map
Reuse libbpf_mem_ensure() when adding a new map to the list of maps
inside bpf_object. It takes care of proper resizing and reallocating of
map array and zeroing out newly allocated memory.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-3-andrii@kernel.org
Andrii Nakryiko [Thu, 28 Apr 2022 04:15:20 +0000 (21:15 -0700)]
libbpf: Append "..." in fixed up log if CO-RE spec is truncated
Detect CO-RE spec truncation and append "..." to make user aware that
there was supposed to be more of the spec there.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-2-andrii@kernel.org
Andrii Nakryiko [Thu, 28 Apr 2022 18:53:49 +0000 (11:53 -0700)]
selftests/bpf: Use target-less SEC() definitions in various tests
Add new or modify existing SEC() definitions to be target-less and
validate that libbpf handles such program definitions correctly.
For kprobe/kretprobe we also add explicit test that generic
bpf_program__attach() works in cases when kprobe definition contains
proper target. It wasn't previously tested as selftests code always
explicitly specified the target regardless.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220428185349.3799599-4-andrii@kernel.org
Andrii Nakryiko [Thu, 28 Apr 2022 18:53:48 +0000 (11:53 -0700)]
libbpf: Support target-less SEC() definitions for BTF-backed programs
Similar to previous patch, support target-less definitions like
SEC("fentry"), SEC("freplace"), etc. For such BTF-backed program types
it is expected that user will specify BTF target programmatically at
runtime using bpf_program__set_attach_target() *before* load phase. If
not, libbpf will report this as an error.
Aslo use SEC_ATTACH_BTF flag instead of explicitly listing a set of
types that are expected to require attach_btf_id. This was an accidental
omission during custom SEC() support refactoring.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220428185349.3799599-3-andrii@kernel.org
Andrii Nakryiko [Thu, 28 Apr 2022 18:53:47 +0000 (11:53 -0700)]
libbpf: Allow "incomplete" basic tracing SEC() definitions
In a lot of cases the target of kprobe/kretprobe, tracepoint, raw
tracepoint, etc BPF program might not be known at the compilation time
and will be discovered at runtime. This was always a supported case by
libbpf, with APIs like bpf_program__attach_{kprobe,tracepoint,etc}()
accepting full target definition, regardless of what was defined in
SEC() definition in BPF source code.
Unfortunately, up till now libbpf still enforced users to specify at
least something for the fake target, e.g., SEC("kprobe/whatever"), which
is cumbersome and somewhat misleading.
This patch allows target-less SEC() definitions for basic tracing BPF
program types:
- kprobe/kretprobe;
- multi-kprobe/multi-kretprobe;
- tracepoints;
- raw tracepoints.
Such target-less SEC() definitions are meant to specify declaratively
proper BPF program type only. Attachment of them will have to be handled
programmatically using correct APIs. As such, skeleton's auto-attachment
of such BPF programs is skipped and generic bpf_program__attach() will
fail, if attempted, due to the lack of enough target information.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220428185349.3799599-2-andrii@kernel.org
Liu Jian [Wed, 27 Apr 2022 11:51:50 +0000 (19:51 +0800)]
bpf, sockmap: Call skb_linearize only when required in sk_psock_skb_ingress_enqueue
The skb_to_sgvec fails only when the number of frag_list and frags
exceeds MAX_MSG_FRAGS. Therefore, we can call skb_linearize only
when the conversion fails.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220427115150.210213-1-liujian56@huawei.com
Tiezhu Yang [Thu, 28 Apr 2022 09:55:54 +0000 (17:55 +0800)]
bpf, docs: Fix typo "respetively" to "respectively"
"respetively" should be "respectively".
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1651139754-4838-4-git-send-email-yangtiezhu@loongson.cn
Tiezhu Yang [Thu, 28 Apr 2022 09:55:53 +0000 (17:55 +0800)]
bpf, docs: BPF_FROM_BE exists as alias for BPF_TO_BE
According to include/uapi/linux/bpf.h:
#define BPF_FROM_LE BPF_TO_LE
#define BPF_FROM_BE BPF_TO_BE
BPF_FROM_BE exists as alias for BPF_TO_BE instead of BPF_TO_LE.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1651139754-4838-3-git-send-email-yangtiezhu@loongson.cn
Tiezhu Yang [Thu, 28 Apr 2022 09:55:52 +0000 (17:55 +0800)]
bpf, docs: Remove duplicated word "instructions"
The word "instructions" is duplicated, remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1651139754-4838-2-git-send-email-yangtiezhu@loongson.cn
Zhengchao Shao [Wed, 27 Apr 2022 06:23:38 +0000 (14:23 +0800)]
samples/bpf: Detach xdp prog when program exits unexpectedly in xdp_rxq_info_user
When xdp_rxq_info_user program exits unexpectedly, it doesn't detach xdp
prog of device, and other xdp prog can't be attached to the device. So
call init_exit() to detach xdp prog when program exits unexpectedly.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220427062338.80173-1-shaozhengchao@huawei.com
Mykola Lysenko [Wed, 27 Apr 2022 04:13:53 +0000 (21:13 -0700)]
bpf/selftests: Add granular subtest output for prog_test
Implement per subtest log collection for both parallel
and sequential test execution. This allows granular
per-subtest error output in the 'All error logs' section.
Add subtest log transfer into the protocol during the
parallel test execution.
Move all test log printing logic into dump_test_log
function. One exception is the output of test names when
verbose printing is enabled. Move test name/result
printing into separate functions to avoid repetition.
Print all successful subtest results in the log. Print
only failed test logs when test does not have subtests.
Or only failed subtests' logs when test has subtests.
Disable 'All error logs' output when verbose mode is
enabled. This functionality was already broken and is
causing confusion.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220427041353.246007-1-mykolal@fb.com
Jakub Kicinski [Thu, 28 Apr 2022 00:09:31 +0000 (17:09 -0700)]
Merge https://git./linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arun Ramadoss [Tue, 26 Apr 2022 09:10:48 +0000 (14:40 +0530)]
net: dsa: ksz9477: move get_stats64 to ksz_common.c
The mib counters for the ksz9477 is same for the ksz9477 switch and
LAN937x switch. Hence moving it to ksz_common.c file in order to have it
generic function. The DSA hook get_stats64 now can call ksz_get_stats64.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220426091048.9311-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Wed, 27 Apr 2022 11:22:56 +0000 (12:22 +0100)]
Merge branch 'remove-virt_to_bus-drivers'
Jakub Kicinski says:
====================
net: remove non-Ethernet drivers using virt_to_bus()
Networking is currently the main offender in using virt_to_bus().
Frankly all the drivers which use it are super old and unlikely
to be used today. They are just an ongoing maintenance burden.
In other words this series is using virt_to_bus() as an excuse
to shed some old stuff. Having done the tree-wide dev_addr_set()
conversion recently I have limited sympathy for carrying dead
code.
Obviously please scream if any of these drivers _is_ in fact
still being used. Otherwise let's take the chance, we can always
apologize and revert if users show up later.
Also I should say thanks to everyone who contributed to this code!
The work continues to be appreciated although realistically in more
of a "history book" fashion...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 26 Apr 2022 17:54:36 +0000 (10:54 -0700)]
net: hamradio: remove support for DMA SCC devices
Another incarnation of Z8530, looks like? Again, no real changes
in the git history, and it needs VIRT_TO_BUS. Unlikely to have
users, let's spend less time refactoring dead code...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 26 Apr 2022 17:54:35 +0000 (10:54 -0700)]
net: wan: remove support for Z85230-based devices
Looks like all the changes to this driver had been automated
churn since git era begun. The driver is using virt_to_bus(),
it's just a maintenance burden unlikely to have any users.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 26 Apr 2022 17:54:34 +0000 (10:54 -0700)]
net: wan: remove support for COSA and SRP synchronous serial boards
Looks like all the changes to this driver had been automated
churn since git era begun. The driver is using virt_to_bus()
so it should be updated to a proper DMA API or removed. Given
the latest "news" entry on the website is from 1999 I'm opting
for the latter.
I'm marking the allocated char device major number as [REMOVED],
I reckon we can't reuse it in case some SW out there assumes its
COSA?
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 26 Apr 2022 17:54:33 +0000 (10:54 -0700)]
net: atm: remove support for ZeitNet ZN122x ATM devices
This driver received nothing but automated fixes in the last 15 years.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 26 Apr 2022 17:54:32 +0000 (10:54 -0700)]
net: atm: remove support for Madge Horizon ATM devices
This driver received nothing but automated fixes since git era begun.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 26 Apr 2022 17:54:31 +0000 (10:54 -0700)]
net: atm: remove support for Fujitsu FireStream ATM devices
This driver received nothing but automated fixes (mostly spelling
and compiler warnings) since git era begun. Since it's using
virt_to_bus it's unlikely to be used on any modern platform.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 27 Apr 2022 11:03:18 +0000 (12:03 +0100)]
Merge branch 'lan966x-ptp-programmable-pins'
Horatiu Vultur says:
====================
net: lan966x: Add support for PTP programmable pins
Lan966x has 8 PTP programmable pins. The last pin is hardcoded to be used
by PHC0 and all the rest are shareable between the PHCs. The PTP pins can
implement both extts and perout functions.
v1->v2:
- use ptp_find_pin_unlocked instead of ptp_find_pin inside the irq handler.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Wed, 27 Apr 2022 06:51:27 +0000 (08:51 +0200)]
net: lan966x: Add support for PTP_PF_EXTTS
Extend the PTP programmable pins to implement also PTP_PF_EXTTS
function. The PTP pin can be configured to capture only on the rising
edge of the PPS signal. And once an event is seen then an interrupt is
generated and the local time counter is saved.
The interrupt is shared between all the pins.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Wed, 27 Apr 2022 06:51:26 +0000 (08:51 +0200)]
net: lan966x: Add support for PTP_PF_PEROUT
Lan966x has 8 PTP programmable pins, where the last pins is hardcoded to
be used by PHC0, which does the frame timestamping. All the rest of the
PTP pins can be shared between the PHCs and can have different functions
like perout or extts. For now add support for PTP_FS_PEROUT.
The HW is not able to support absolute start time but can use the nsec
for phase adjustment when generating PPS.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Wed, 27 Apr 2022 06:51:25 +0000 (08:51 +0200)]
net: lan966x: Add registers used to configure the PTP pin
Add registers that are used to configure the PTP pins. These registers
are used to enable the interrupts per PTP pin and to set the waveform
generated by the pin.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Wed, 27 Apr 2022 06:51:24 +0000 (08:51 +0200)]
net: lan966x: Change the PTP pin used to read/write the PHC.
To read/write a value to a PHC, it is required to use a PTP pin.
Currently it is used pin 5, but change to pin 7 as is the last pin.
All the other pins will have different functions.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Wed, 27 Apr 2022 06:51:23 +0000 (08:51 +0200)]
dt-bindings: net: lan966x: Extend with the ptp external interrupt.
Extend dt-bindings for lan966x with ptp external interrupt. This is
generated when an external 1pps signal is received on the ptp pin.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 27 Apr 2022 09:45:55 +0000 (10:45 +0100)]
Merge branch 'mptcp-MP_FAIL-timeout'
Mat Martineau says:
====================
mptcp: Timeout for MP_FAIL response
When one peer sends an infinite mapping to coordinate fallback from
MPTCP to regular TCP, the other peer is expected to send a packet with
the MPTCP MP_FAIL option to acknowledge the infinite mapping. Rather
than leave the connection in some half-fallback state, this series adds
a timeout after which the infinite mapping sender will reset the
connection.
Patch 1 adds a fallback self test.
Patches 2-5 make use of the MPTCP socket's retransmit timer to reset the
MPTCP connection if no MP_FAIL was received.
Patches 6 and 7 extends the self test to check MP_FAIL-related MIBs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 26 Apr 2022 21:57:17 +0000 (14:57 -0700)]
selftests: mptcp: print extra msg in chk_csum_nr
When the multiple checksum errors occur in chk_csum_nr(), print the
numbers of the errors as an extra message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 26 Apr 2022 21:57:16 +0000 (14:57 -0700)]
selftests: mptcp: check MP_FAIL response mibs
This patch extends chk_fail_nr to check the MP_FAIL response mibs.
Add a new argument invert for chk_fail_nr to allow it can check the
MP_FAIL TX and RX mibs from the opposite direction.
When the infinite map is received before the MP_FAIL response, the
response will be lost. A '-' can be added into fail_tx or fail_rx to
represent that MP_FAIL response TX or RX can be lost when doing the
checks.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 26 Apr 2022 21:57:15 +0000 (14:57 -0700)]
mptcp: reset subflow when MP_FAIL doesn't respond
This patch adds a new msk->flags bit MPTCP_FAIL_NO_RESPONSE, then reuses
sk_timer to trigger a check if we have not received a response from the
peer after sending MP_FAIL. If the peer doesn't respond properly, reset
the subflow.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 26 Apr 2022 21:57:14 +0000 (14:57 -0700)]
mptcp: add MP_FAIL response support
This patch adds a new struct member mp_fail_response_expect in struct
mptcp_subflow_context to support MP_FAIL response. In the single subflow
with checksum error and contiguous data special case, a MP_FAIL is sent
in response to another MP_FAIL.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 26 Apr 2022 21:57:13 +0000 (14:57 -0700)]
mptcp: add data lock for sk timers
mptcp_data_lock() needs to be held when manipulating the msk
retransmit_timer or the sk sk_timer. This patch adds the data
lock for the both timers.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 26 Apr 2022 21:57:12 +0000 (14:57 -0700)]
mptcp: use mptcp_stop_timer
Use the helper mptcp_stop_timer() instead of using sk_stop_timer() to
stop icsk_retransmit_timer directly.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 26 Apr 2022 21:57:11 +0000 (14:57 -0700)]
selftests: mptcp: add infinite map testcase
Add the single subflow test case for MP_FAIL, to test the infinite
mapping case. Use the test_linkfail value to make 128KB test files.
Add a new function reset_with_fail(), in it use 'iptables' and 'tc
action pedit' rules to produce the bit flips to trigger the checksum
failures. Set validate_checksum to enable checksums for the MP_FAIL
tests without passing the '-C' argument. Set check_invert flag to
enable the invert bytes check for the output data in check_transfer().
Instead of the file mismatch error, this test prints out the inverted
bytes.
Add a new function pedit_action_pkts() to get the numbers of the packets
edited by the tc pedit actions. Print this numbers to the output.
Also add the needed kernel configures in the selftests config file.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcel Ziswiler [Mon, 25 Apr 2022 15:48:56 +0000 (17:48 +0200)]
net: stmmac: dwmac-imx: comment spelling fix
Fix spelling in comment.
Fixes:
94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Link: https://lore.kernel.org/r/20220425154856.169499-1-marcel@ziswiler.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjorn Helgaas [Mon, 25 Apr 2022 21:26:44 +0000 (16:26 -0500)]
net: remove comments that mention obsolete __SLOW_DOWN_IO
The only remaining definitions of __SLOW_DOWN_IO (for alpha and ia64) do
nothing, and the only mentions in networking are in comments. Remove these
mentions.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjorn Helgaas [Mon, 25 Apr 2022 21:26:43 +0000 (16:26 -0500)]
net: wan: atp: remove unused eeprom_delay()
atp.h is included only by atp.c, which does not use eeprom_delay(). Remove
the unused definition.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 25 Apr 2022 23:33:09 +0000 (16:33 -0700)]
net: tls: fix async vs NIC crypto offload
When NIC takes care of crypto (or the record has already
been decrypted) we forget to update darg->async. ->async
is supposed to mean whether record is async capable on
input and whether record has been queued for async crypto
on output.
Reported-by: Gal Pressman <gal@nvidia.com>
Fixes:
3547a1f9d988 ("tls: rx: use async as an in-out argument")
Tested-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20220425233309.344858-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Mon, 25 Apr 2022 21:28:02 +0000 (22:28 +0100)]
net: dsa: mt753x: fix pcs conversion regression
Daniel Golle reports that the conversion of mt753x to phylink PCS caused
an oops as below.
The problem is with the placement of the PCS initialisation, which
occurs after mt7531_setup() has been called. However, burited in this
function is a call to setup the CPU port, which requires the PCS
structure to be already setup.
Fix this by changing the initialisation order.
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
Mem abort info:
ESR = 0x96000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=
0000000046057000
[
0000000000000020] pgd=
0000000000000000, p4d=
0000000000000000, pud=
0000000000000000
Internal error: Oops:
96000005 [#1] SMP
Modules linked in:
CPU: 0 PID: 32 Comm: kworker/u4:1 Tainted: G S 5.18.0-rc3-next-
20220422+ #0
Hardware name: Bananapi BPI-R64 (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate:
60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mt7531_cpu_port_config+0xcc/0x1b0
lr : mt7531_cpu_port_config+0xc0/0x1b0
sp :
ffffffc008d5b980
x29:
ffffffc008d5b990 x28:
ffffff80060562c8 x27:
00000000f805633b
x26:
ffffff80001a8880 x25:
00000000000009c4 x24:
0000000000000016
x23:
ffffff8005eb6470 x22:
0000000000003600 x21:
ffffff8006948080
x20:
0000000000000000 x19:
0000000000000006 x18:
0000000000000000
x17:
0000000000000001 x16:
0000000000000001 x15:
02963607fcee069e
x14:
0000000000000000 x13:
0000000000000030 x12:
0101010101010101
x11:
ffffffc037302000 x10:
0000000000000870 x9 :
ffffffc008d5b800
x8 :
ffffff800028f950 x7 :
0000000000000001 x6 :
00000000662b3000
x5 :
00000000000002f0 x4 :
0000000000000000 x3 :
ffffff800028f080
x2 :
0000000000000000 x1 :
ffffff800028f080 x0 :
0000000000000000
Call trace:
mt7531_cpu_port_config+0xcc/0x1b0
mt753x_cpu_port_enable+0x24/0x1f0
mt7531_setup+0x49c/0x5c0
mt753x_setup+0x20/0x31c
dsa_register_switch+0x8bc/0x1020
mt7530_probe+0x118/0x200
mdio_probe+0x30/0x64
really_probe.part.0+0x98/0x280
__driver_probe_device+0x94/0x140
driver_probe_device+0x40/0x114
__device_attach_driver+0xb0/0x10c
bus_for_each_drv+0x64/0xa0
__device_attach+0xa8/0x16c
device_initial_probe+0x10/0x20
bus_probe_device+0x94/0x9c
deferred_probe_work_func+0x80/0xb4
process_one_work+0x200/0x3a0
worker_thread+0x260/0x4c0
kthread+0xd4/0xe0
ret_from_fork+0x10/0x20
Code:
9409e911 937b7e60 8b0002a0 f9405800 (
f9401005)
---[ end trace
0000000000000000 ]---
Reported-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Fixes:
cbd1f243bc41 ("net: dsa: mt7530: partially convert to phylink_pcs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1nj6FW-007WZB-5Y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 22 Apr 2022 20:12:37 +0000 (13:12 -0700)]
net: generalize skb freeing deferral to per-cpu lists
Logic added in commit
f35f821935d8 ("tcp: defer skb freeing after socket
lock is released") helped bulk TCP flows to move the cost of skbs
frees outside of critical section where socket lock was held.
But for RPC traffic, or hosts with RFS enabled, the solution is far from
being ideal.
For RPC traffic, recvmsg() has to return to user space right after
skb payload has been consumed, meaning that BH handler has no chance
to pick the skb before recvmsg() thread. This issue is more visible
with BIG TCP, as more RPC fit one skb.
For RFS, even if BH handler picks the skbs, they are still picked
from the cpu on which user thread is running.
Ideally, it is better to free the skbs (and associated page frags)
on the cpu that originally allocated them.
This patch removes the per socket anchor (sk->defer_list) and
instead uses a per-cpu list, which will hold more skbs per round.
This new per-cpu list is drained at the end of net_action_rx(),
after incoming packets have been processed, to lower latencies.
In normal conditions, skbs are added to the per-cpu list with
no further action. In the (unlikely) cases where the cpu does not
run net_action_rx() handler fast enough, we use an IPI to raise
NET_RX_SOFTIRQ on the remote cpu.
Also, we do not bother draining the per-cpu list from dev_cpu_dead()
This is because skbs in this list have no requirement on how fast
they should be freed.
Note that we can add in the future a small per-cpu cache
if we see any contention on sd->defer_lock.
Tested on a pair of hosts with 100Gbit NIC, RFS enabled,
and /proc/sys/net/ipv4/tcp_rmem[2] tuned to 16MB to work around
page recycling strategy used by NIC driver (its page pool capacity
being too small compared to number of skbs/pages held in sockets
receive queues)
Note that this tuning was only done to demonstrate worse
conditions for skb freeing for this particular test.
These conditions can happen in more general production workload.
10 runs of one TCP_STREAM flow
Before:
Average throughput: 49685 Mbit.
Kernel profiles on cpu running user thread recvmsg() show high cost for
skb freeing related functions (*)
57.81% [kernel] [k] copy_user_enhanced_fast_string
(*) 12.87% [kernel] [k] skb_release_data
(*) 4.25% [kernel] [k] __free_one_page
(*) 3.57% [kernel] [k] __list_del_entry_valid
1.85% [kernel] [k] __netif_receive_skb_core
1.60% [kernel] [k] __skb_datagram_iter
(*) 1.59% [kernel] [k] free_unref_page_commit
(*) 1.16% [kernel] [k] __slab_free
1.16% [kernel] [k] _copy_to_iter
(*) 1.01% [kernel] [k] kfree
(*) 0.88% [kernel] [k] free_unref_page
0.57% [kernel] [k] ip6_rcv_core
0.55% [kernel] [k] ip6t_do_table
0.54% [kernel] [k] flush_smp_call_function_queue
(*) 0.54% [kernel] [k] free_pcppages_bulk
0.51% [kernel] [k] llist_reverse_order
0.38% [kernel] [k] process_backlog
(*) 0.38% [kernel] [k] free_pcp_prepare
0.37% [kernel] [k] tcp_recvmsg_locked
(*) 0.37% [kernel] [k] __list_add_valid
0.34% [kernel] [k] sock_rfree
0.34% [kernel] [k] _raw_spin_lock_irq
(*) 0.33% [kernel] [k] __page_cache_release
0.33% [kernel] [k] tcp_v6_rcv
(*) 0.33% [kernel] [k] __put_page
(*) 0.29% [kernel] [k] __mod_zone_page_state
0.27% [kernel] [k] _raw_spin_lock
After patch:
Average throughput: 73076 Mbit.
Kernel profiles on cpu running user thread recvmsg() looks better:
81.35% [kernel] [k] copy_user_enhanced_fast_string
1.95% [kernel] [k] _copy_to_iter
1.95% [kernel] [k] __skb_datagram_iter
1.27% [kernel] [k] __netif_receive_skb_core
1.03% [kernel] [k] ip6t_do_table
0.60% [kernel] [k] sock_rfree
0.50% [kernel] [k] tcp_v6_rcv
0.47% [kernel] [k] ip6_rcv_core
0.45% [kernel] [k] read_tsc
0.44% [kernel] [k] _raw_spin_lock_irqsave
0.37% [kernel] [k] _raw_spin_lock
0.37% [kernel] [k] native_irq_return_iret
0.33% [kernel] [k] __inet6_lookup_established
0.31% [kernel] [k] ip6_protocol_deliver_rcu
0.29% [kernel] [k] tcp_rcv_established
0.29% [kernel] [k] llist_reverse_order
v2: kdoc issue (kernel bots)
do not defer if (alloc_cpu == smp_processor_id()) (Paolo)
replace the sk_buff_head with a single-linked list (Jakub)
add a READ_ONCE()/WRITE_ONCE() for the lockless read of sd->defer_list
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220422201237.416238-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov [Tue, 26 Apr 2022 22:41:47 +0000 (15:41 -0700)]
Merge branch 'Teach libbpf to "fix up" BPF verifier log'
Andrii Nakryiko says:
====================
This patch set teaches libbpf to enhance BPF verifier log with human-readable
and relevant information about failed CO-RE relocation. Patch #9 is the main
one with the new logic. See relevant commit messages for some more details.
All the other patches are either fixing various bugs detected
while working on this feature, most prominently a bug with libbpf not handling
CO-RE relocations for SEC("?...") programs, or are refactoring libbpf
internals to allow for easier reuse of CO-RE relo lookup and formatting logic.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:11 +0000 (17:45 -0700)]
selftests/bpf: Add libbpf's log fixup logic selftests
Add tests validating that libbpf is indeed patching up BPF verifier log
with CO-RE relocation details. Also test partial and full truncation
scenarios.
This test might be a bit fragile due to changing BPF verifier log
format. If that proves to be frequently breaking, we can simplify tests
or remove the truncation subtests. But for now it seems useful to test
it in those conditions that are otherwise rarely occuring in practice.
Also test CO-RE relo failure in a subprog as that excercises subprogram CO-RE
relocation mapping logic which doesn't work out of the box without extra
relo storage previously done only for gen_loader case.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-11-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:10 +0000 (17:45 -0700)]
libbpf: Fix up verifier log for unguarded failed CO-RE relos
Teach libbpf to post-process BPF verifier log on BPF program load
failure and detect known error patterns to provide user with more
context.
Currently there is one such common situation: an "unguarded" failed BPF
CO-RE relocation. While failing CO-RE relocation is expected, it is
expected to be property guarded in BPF code such that BPF verifier
always eliminates BPF instructions corresponding to such failed CO-RE
relos as dead code. In cases when user failed to take such precautions,
BPF verifier provides the best log it can:
123: (85) call unknown#
195896080
invalid func unknown#
195896080
Such incomprehensible log error is due to libbpf "poisoning" BPF
instruction that corresponds to failed CO-RE relocation by replacing it
with invalid `call 0xbad2310` instruction (
195896080 == 0xbad2310 reads
"bad relo" if you squint hard enough).
Luckily, libbpf has all the necessary information to look up CO-RE
relocation that failed and provide more human-readable description of
what's going on:
5: <invalid CO-RE relocation>
failed to resolve CO-RE relocation <byte_off> [6] struct task_struct___bad.fake_field_subprog (0:2 @ offset 8)
This hopefully makes it much easier to understand what's wrong with
user's BPF program without googling magic constants.
This BPF verifier log fixup is setup to be extensible and is going to be
used for at least one other upcoming feature of libbpf in follow up patches.
Libbpf is parsing lines of BPF verifier log starting from the very end.
Currently it processes up to 10 lines of code looking for familiar
patterns. This avoids wasting lots of CPU processing huge verifier logs
(especially for log_level=2 verbosity level). Actual verification error
should normally be found in last few lines, so this should work
reliably.
If libbpf needs to expand log beyond available log_buf_size, it
truncates the end of the verifier log. Given verifier log normally ends
with something like:
processed 2 insns (limit
1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
... truncating this on program load error isn't too bad (end user can
always increase log size, if it needs to get complete log).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-10-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:09 +0000 (17:45 -0700)]
libbpf: Simplify bpf_core_parse_spec() signature
Simplify bpf_core_parse_spec() signature to take struct bpf_core_relo as
an input instead of requiring callers to decompose them into type_id,
relo, spec_str, etc. This makes using and reusing this helper easier.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-9-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:08 +0000 (17:45 -0700)]
libbpf: Refactor CO-RE relo human description formatting routine
Refactor how CO-RE relocation is formatted. Now it dumps human-readable
representation, currently used by libbpf in either debug or error
message output during CO-RE relocation resolution process, into provided
buffer. This approach allows for better reuse of this functionality
outside of CO-RE relocation resolution, which we'll use in next patch
for providing better error message for BPF verifier rejecting BPF
program due to unguarded failed CO-RE relocation.
It also gets rid of annoying "stitching" of libbpf_print() calls, which
was the only place where we did this.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-8-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:07 +0000 (17:45 -0700)]
libbpf: Record subprog-resolved CO-RE relocations unconditionally
Previously, libbpf recorded CO-RE relocations with insns_idx resolved
according to finalized subprog locations (which are appended at the end
of entry BPF program) to simplify the job of light skeleton generator.
This is necessary because once subprogs' instructions are appended to
main entry BPF program all the subprog instruction indices are shifted
and that shift is different for each entry (main) BPF program, so it's
generally impossible to map final absolute insn_idx of the finalized BPF
program to their original locations inside subprograms.
This information is now going to be used not only during light skeleton
generation, but also to map absolute instruction index to subprog's
instruction and its corresponding CO-RE relocation. So start recording
these relocations always, not just when obj->gen_loader is set.
This information is going to be freed at the end of bpf_object__load()
step, as before (but this can change in the future if there will be
a need for this information post load step).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-7-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:06 +0000 (17:45 -0700)]
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
Enhance linked_funcs selftest with two tricky features that might not
obviously work correctly together. We add CO-RE relocations to entry BPF
programs and mark those programs as non-autoloadable with SEC("?...")
annotation. This makes sure that libbpf itself handles .BTF.ext CO-RE
relocation data matching correctly for SEC("?...") programs, as well as
ensures that BPF static linker handles this correctly (this was the case
before, no changes are necessary, but it wasn't explicitly tested).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-6-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:05 +0000 (17:45 -0700)]
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
Instead of using ELF section names as a joining key between .BTF.ext and
corresponding BPF programs, pre-build .BTF.ext section number to ELF
section index mapping during bpf_object__open() and use it later for
matching .BTF.ext information (func/line info or CO-RE relocations) to
their respective BPF programs and subprograms.
This simplifies corresponding joining logic and let's libbpf do
manipulations with BPF program's ELF sections like dropping leading '?'
character for non-autoloaded programs. Original joining logic in
bpf_object__relocate_core() (see relevant comment that's now removed)
was never elegant, so it's a good improvement regardless. But it also
avoids unnecessary internal assumptions about preserving original ELF
section name as BPF program's section name (which was broken when
SEC("?abc") support was added).
Fixes:
a3820c481112 ("libbpf: Support opting out from autoloading BPF programs declaratively")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-5-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:04 +0000 (17:45 -0700)]
libbpf: Fix logic for finding matching program for CO-RE relocation
Fix the bug in bpf_object__relocate_core() which can lead to finding
invalid matching BPF program when processing CO-RE relocation. IF
matching program is not found, last encountered program will be assumed
to be correct program and thus error detection won't detect the problem.
Fixes:
9c82a63cf370 ("libbpf: Fix CO-RE relocs against .text section")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-4-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:03 +0000 (17:45 -0700)]
libbpf: Drop unhelpful "program too large" guess
libbpf pretends it knows actual limit of BPF program instructions based
on UAPI headers it compiled with. There is neither any guarantee that
UAPI headers match host kernel, nor BPF verifier actually uses
BPF_MAXINSNS constant anymore. Just drop unhelpful "guess", BPF verifier
will emit actual reason for failure in its logs anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-3-andrii@kernel.org
Andrii Nakryiko [Tue, 26 Apr 2022 00:45:02 +0000 (17:45 -0700)]
libbpf: Fix anonymous type check in CO-RE logic
Use type name for checking whether CO-RE relocation is referring to
anonymous type. Using spec string makes no sense.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-2-andrii@kernel.org
Menglong Dong [Mon, 25 Apr 2022 13:32:47 +0000 (21:32 +0800)]
bpf: Compute map_btf_id during build time
For now, the field 'map_btf_id' in 'struct bpf_map_ops' for all map
types are computed during vmlinux-btf init:
btf_parse_vmlinux() -> btf_vmlinux_map_ids_init()
It will lookup the btf_type according to the 'map_btf_name' field in
'struct bpf_map_ops'. This process can be done during build time,
thanks to Jiri's resolve_btfids.
selftest of map_ptr has passed:
$96 map_ptr:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ethan Yang [Mon, 25 Apr 2022 05:40:28 +0000 (13:40 +0800)]
net: usb: qmi_wwan: add support for Sierra Wireless EM7590
add support for Sierra Wireless EM7590 0xc081 composition.
Signed-off-by: Ethan Yang <etyang@sierrawireless.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220425054028.5444-1-etyang@sierrawireless.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu [Mon, 25 Apr 2022 01:45:02 +0000 (09:45 +0800)]
net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO
Currently, the kernel drops GSO VLAN tagged packet if it's created with
socket(AF_PACKET, SOCK_RAW, 0) plus virtio_net_hdr.
The reason is AF_PACKET doesn't adjust the skb network header if there is
a VLAN tag. Then after virtio_net_hdr_set_proto() called, the skb->protocol
will be set to ETH_P_IP/IPv6. And in later inet/ipv6_gso_segment() the skb
is dropped as network header position is invalid.
Let's handle VLAN packets by adjusting network header position in
packet_parse_headers(). The adjustment is safe and does not affect the
later xmit as tap device also did that.
In packet_snd(), packet_parse_headers() need to be moved before calling
virtio_net_hdr_set_proto(), so we can set correct skb->protocol and
network header first.
There is no need to update tpacket_snd() as it calls packet_parse_headers()
in tpacket_fill_skb(), which is already before calling virtio_net_hdr_*
functions.
skb->no_fcs setting is also moved upper to make all skb settings together
and keep consistency with function packet_sendmsg_spkt().
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220425014502.985464-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arun Ramadoss [Sun, 24 Apr 2022 11:28:31 +0000 (16:58 +0530)]
net: dsa: ksz: added the generic port_stp_state_set function
The ksz8795 and ksz9477 uses the same algorithm for the
port_stp_state_set function except the register address is different. So
moved the algorithm to the ksz_common.c and used the dev_ops for
register read and write. This function can also used for the lan937x
part. Hence making it generic for all the parts.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424112831.11504-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Arun Ramadoss [Sat, 23 Apr 2022 15:47:27 +0000 (21:17 +0530)]
net: phy: LAN937x: add interrupt support for link detection
Added the config_intr and handle_interrupt for the LAN937x phy which is
same as the LAN87xx phy.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220423154727.29052-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alexei Starovoitov [Tue, 26 Apr 2022 00:31:36 +0000 (17:31 -0700)]
Merge branch 'Introduce typed pointer support in BPF maps'
Kumar Kartikeya Dwivedi says:
====================
This set enables storing pointers of a certain type in BPF map, and extends the
verifier to enforce type safety and lifetime correctness properties.
The infrastructure being added is generic enough for allowing storing any kind
of pointers whose type is available using BTF (user or kernel) in the future
(e.g. strongly typed memory allocation in BPF program), which are internally
tracked in the verifier as PTR_TO_BTF_ID, but for now the series limits them to
two kinds of pointers obtained from the kernel.
Obviously, use of this feature depends on map BTF.
1. Unreferenced kernel pointer
In this case, there are very few restrictions. The pointer type being stored
must match the type declared in the map value. However, such a pointer when
loaded from the map can only be dereferenced, but not passed to any in-kernel
helpers or kernel functions available to the program. This is because while the
verifier's exception handling mechanism coverts BPF_LDX to PROBE_MEM loads,
which are then handled specially by the JIT implementation, the same liberty is
not available to accesses inside the kernel. The pointer by the time it is
passed into a helper has no lifetime related guarantees about the object it is
pointing to, and may well be referencing invalid memory.
2. Referenced kernel pointer
This case imposes a lot of restrictions on the programmer, to ensure safety. To
transfer the ownership of a reference in the BPF program to the map, the user
must use the bpf_kptr_xchg helper, which returns the old pointer contained in
the map, as an acquired reference, and releases verifier state for the
referenced pointer being exchanged, as it moves into the map.
This a normal PTR_TO_BTF_ID that can be used with in-kernel helpers and kernel
functions callable by the program.
However, if BPF_LDX is used to load a referenced pointer from the map, it is
still not permitted to pass it to in-kernel helpers or kernel functions. To
obtain a reference usable with helpers, the user must invoke a kfunc helper
which returns a usable reference (which also must be eventually released before
BPF_EXIT, or moved into a map).
Since the load of the pointer (preserving data dependency ordering) must happen
inside the RCU read section, the kfunc helper will take a pointer to the map
value, which must point to the actual pointer of the object whose reference is
to be raised. The type will be verified from the BTF information of the kfunc,
as the prototype must be:
T *func(T **, ... /* other arguments */);
Then, the verifier checks whether pointer at offset of the map value points to
the type T, and permits the call.
This convention is followed so that such helpers may also be called from
sleepable BPF programs, where RCU read lock is not necessarily held in the BPF
program context, hence necessiating the need to pass in a pointer to the actual
pointer to perform the load inside the RCU read section.
Notes
-----
* C selftests require https://reviews.llvm.org/
D119799 to pass.
* Unlike BPF timers, kptr is not reset or freed on map_release_uref.
* Referenced kptr storage is always treated as unsigned long * on kernel side,
as BPF side cannot mutate it. The storage (8 bytes) is sufficient for both
32-bit and 64-bit platforms.
* Use of WRITE_ONCE to reset unreferenced kptr on 32-bit systems is fine, as
the actual pointer is always word sized, so the store tearing into two 32-bit
stores won't be a problem as the other half is always zeroed out.
Changelog:
----------
v5 -> v6
v5: https://lore.kernel.org/bpf/
20220415160354.
1050687-1-memxor@gmail.com
* Address comments from Alexei
* Drop 'Revisit stack usage' comment
* Rename off_btf to kernel_btf
* Add comment about searching using type from map BTF
* Do kmemdup + btf_get instead of get + kmemdup + put
* Add comment for btf_struct_ids_match
* Add comment for assigning non-zero id for mark_ptr_or_null_reg
* Rename PTR_RELEASE to OBJ_RELEASE
* Rename BPF_MAP_OFF_DESC_TYPE_XXX_KPTR to BPF_KPTR_XXX
* Remove unneeded likely/unlikely in cold functions
* Fix other misc nits
* Keep release_regno instead of replacing with bool + regno
* Add a patch to prevent type match for first member when off == 0 for
release functions (kfunc + BPF helpers)
* Guard kptr/kptr_ref definition in libbpf header with __has_attribute
to prevent selftests compilation error with old clang not support
type tags
v4 -> v5
v4: https://lore.kernel.org/bpf/
20220409093303.499196-1-memxor@gmail.com
* Address comments from Joanne
* Move __btf_member_bit_offset before strcmp
* Move strcmp conditional on name to unref kptr patch
* Directly return from btf_find_struct in patch 1
* Use enum btf_field_type vs int field_type
* Put btf and btf_id in off_desc in named struct 'kptr'
* Switch order for BTF_FIELD_IGNORE check
* Drop dead tab->nr_off = 0 store
* Use i instead of tab->nr_off to btf_put on failure
* Replace kzalloc + memcpy with kmemdup (kernel test robot)
* Reject both BPF_F_RDONLY_PROG and BPF_F_WRONLY_PROG
* Add logging statement for reject BPF_MODE(insn->code) != BPF_MEM
* Rename off_desc -> kptr_off_desc in check_mem_access
* Drop check for err, fallthrough to end of function
* Remove is_release_function, use meta.release_regno to detect release
function, release reference state, and remove check_release_regno
* Drop off_desc->flags, use off_desc->type
* Update comment for ARG_PTR_TO_KPTR
* Distinguish between direct/indirect access to kptr
* Drop check_helper_mem_access from process_kptr_func, check_mem_reg in kptr_get
* Add verifier test for helper accessing kptr indirectly
* Fix other misc nits, add Acked-by for patch 2
v3 -> v4
v3: https://lore.kernel.org/bpf/
20220320155510.671497-1-memxor@gmail.com
* Use btf_parse_kptrs, plural kptrs naming (Joanne, Andrii)
* Remove unused parameters in check_map_kptr_access (Joanne)
* Handle idx < info_cnt kludge using tmp variable (Andrii)
* Validate tags always precede modifiers in BTF (Andrii)
* Split out into https://lore.kernel.org/bpf/
20220406004121.282699-1-memxor@gmail.com
* Store u32 type_id in btf_field_info (Andrii)
* Use base_type in map_kptr_match_type (Andrii)
* Free kptr_off_tab when not bpf_capable (Martin)
* Use PTR_RELEASE flag instead of bools in bpf_func_proto (Joanne)
* Drop extra reg->off and reg->ref_obj_id checks in map_kptr_match_type (Martin)
* Use separate u32 and u8 arrays for offs and sizes in off_arr (Andrii)
* Simplify and remove map->value_size sentinel in copy_map_value (Andrii)
* Use sort_r to keep both arrays in sync while sorting (Andrii)
* Rename check_and_free_timers_and_kptr to check_and_free_fields (Andrii)
* Move dtor prototype checks to registration phase (Alexei)
* Use ret variable for checking ASSERT_XXX, use shorter strings (Andrii)
* Fix missing checks for other maps (Jiri)
* Fix various other nits, and bugs noticed during self review
v2 -> v3
v2: https://lore.kernel.org/bpf/
20220317115957.
3193097-1-memxor@gmail.com
* Address comments from Alexei
* Set name, sz, align in btf_find_field
* Do idx >= info_cnt check in caller of btf_find_field_*
* Use extra element in the info_arr to make this safe
* Remove while loop, reject extra tags
* Remove cases of defensive programming
* Move bpf_capable() check to map_check_btf
* Put check_ptr_off_reg reordering hunk into separate patch
* Warn for ref_ptr once
* Make the meta.ref_obj_id == 0 case simpler to read
* Remove kptr_percpu and kptr_user support, remove their tests
* Store size of field at offset in off_arr
* Fix BPF_F_NO_PREALLOC set wrongly for hash map in C selftest
* Add missing check_mem_reg call for kptr_get kfunc arg#0 check
v1 -> v2
v1: https://lore.kernel.org/bpf/
20220220134813.
3411982-1-memxor@gmail.com
* Address comments from Alexei
* Rename bpf_btf_find_by_name_kind_all to bpf_find_btf_id
* Reduce indentation level in that function
* Always take reference regardless of module or vmlinux BTF
* Also made it the same for btf_get_module_btf
* Use kptr, kptr_ref, kptr_percpu, kptr_user type tags
* Don't reserve tag namespace
* Refactor btf_find_field to be side effect free, allocate and populate
kptr_off_tab in caller
* Move module reference to dtor patch
* Remove support for BPF_XCHG, BPF_CMPXCHG insn
* Introduce bpf_kptr_xchg helper
* Embed offset array in struct bpf_map, populate and sort it once
* Adjust copy_map_value to memcpy directly using this offset array
* Removed size member from offset array to save space
* Fix some problems pointed out by kernel test robot
* Tidy selftests
* Lots of other minor fixes
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kumar Kartikeya Dwivedi [Sun, 24 Apr 2022 21:49:01 +0000 (03:19 +0530)]
selftests/bpf: Add test for strict BTF type check
Ensure that the edge case where first member type was matched
successfully even if it didn't match BTF type of register is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-14-memxor@gmail.com
Kumar Kartikeya Dwivedi [Sun, 24 Apr 2022 21:49:00 +0000 (03:19 +0530)]
selftests/bpf: Add verifier tests for kptr
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in
BPF map case, including some tests that verify implementation sanity and
corner cases.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-13-memxor@gmail.com
Kumar Kartikeya Dwivedi [Sun, 24 Apr 2022 21:48:59 +0000 (03:18 +0530)]
selftests/bpf: Add C tests for kptr
This uses the __kptr and __kptr_ref macros as well, and tries to test
the stuff that is supposed to work, since we have negative tests in
test_verifier suite. Also include some code to test map-in-map support,
such that the inner_map_meta matches the kptr_off_tab of map added as
element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-12-memxor@gmail.com
Kumar Kartikeya Dwivedi [Sun, 24 Apr 2022 21:48:58 +0000 (03:18 +0530)]
libbpf: Add kptr type tag macros to bpf_helpers.h
Include convenience definitions:
__kptr: Unreferenced kptr
__kptr_ref: Referenced kptr
Users can use them to tag the pointer type meant to be used with the new
support directly in the map value definition.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-11-memxor@gmail.com
Kumar Kartikeya Dwivedi [Sun, 24 Apr 2022 21:48:57 +0000 (03:18 +0530)]
bpf: Make BTF type match stricter for release arguments
The current of behavior of btf_struct_ids_match for release arguments is
that when type match fails, it retries with first member type again
(recursively). Since the offset is already 0, this is akin to just
casting the pointer in normal C, since if type matches it was just
embedded inside parent sturct as an object. However, we want to reject
cases for release function type matching, be it kfunc or BPF helpers.
An example is the following:
struct foo {
struct bar b;
};
struct foo *v = acq_foo();
rel_bar(&v->b); // btf_struct_ids_match fails btf_types_are_same, then
// retries with first member type and succeeds, while
// it should fail.
Hence, don't walk the struct and only rely on btf_types_are_same for
strict mode. All users of strict mode must be dealing with zero offset
anyway, since otherwise they would want the struct to be walked.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-10-memxor@gmail.com