x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec()

commit eab6870fee877258122a042bfd99ee7908c40280 upstream.

Mark Rutland noticed that GCC optimization passes have the potential to elide
necessary invocations of the array_index_mask_nospec() instruction sequence,
so mark the asm() volatile.

Mark explains:

"The volatile will inhibit *some* cases where the compiler could lift the
 array_index_nospec() call out of a branch, e.g. where there are multiple
 invocations of array_index_nospec() with the same arguments:

        if (idx < foo) {
                idx1 = array_idx_nospec(idx, foo)
                do_something(idx1);
        }

        < some other code >

        if (idx < foo) {
                idx2 = array_idx_nospec(idx, foo);
                do_something_else(idx2);
        }

 ... since the compiler can determine that the two invocations yield the same
 result, and reuse the first result (likely the same register as idx was in
 originally) for the second branch, effectively re-writing the above as:

        if (idx < foo) {
                idx = array_idx_nospec(idx, foo);
                do_something(idx);
        }

        < some other code >

        if (idx < foo) {
                do_something_else(idx);
        }

 ... if we don't take the first branch, then speculatively take the second, we
 lose the nospec protection.

 There's more info on volatile asm in the GCC docs:

   https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile
 "

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: babdde2698d4 ("x86: Implement array_index_mask_nospec")
Link: https://lkml.kernel.org/lkml/152838798950.14521.4893346294059739135.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/binfmt_misc.c: do not allow offset overflow

commit 5cc41e099504b77014358b58567c5ea6293dd220 upstream.

WHen registering a new binfmt_misc handler, it is possible to overflow
the offset to get a negative value, which might crash the system, or
possibly leak kernel data.

Here is a crash log when 2500000000 was used as an offset:

  BUG: unable to handle kernel paging request at ffff989cfd6edca0
  IP: load_misc_binary+0x22b/0x470 [binfmt_misc]
  PGD 1ef3e067 P4D 1ef3e067 PUD 0
  Oops: 0000 [#1] SMP NOPTI
  Modules linked in: binfmt_misc kvm_intel ppdev kvm irqbypass joydev input_leds serio_raw mac_hid parport_pc qemu_fw_cfg parpy
  CPU: 0 PID: 2499 Comm: bash Not tainted 4.15.0-22-generic #24-Ubuntu
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
  RIP: 0010:load_misc_binary+0x22b/0x470 [binfmt_misc]
  Call Trace:
    search_binary_handler+0x97/0x1d0
    do_execveat_common.isra.34+0x667/0x810
    SyS_execve+0x31/0x40
    do_syscall_64+0x73/0x130
    entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Use kstrtoint instead of simple_strtoul.  It will work as the code
already set the delimiter byte to '\0' and we only do it when the field
is not empty.

Tested with offsets -1, 2500000000, UINT_MAX and INT_MAX.  Also tested
with examples documented at Documentation/admin-guide/binfmt-misc.rst
and other registrations from packages on Ubuntu.

Link: http://lkml.kernel.org/r/20180529135648.14254-1-cascardo@canonical.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: mxc_w1: Enable clock before calling clk_get_rate() on it

commit 955bc61328dc0a297fb3baccd84e9d3aee501ed8 upstream.

According to the API, you may only call clk_get_rate() after actually
enabling it.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: a5fd9139f74c ("w1: add 1-wire master driver for i.MX27 / i.MX31")
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk

commit 2cfce3a86b64b53f0a70e92a6a659c720c319b45 upstream.

Commit 184add2ca23c ("libata: Apply NOLPM quirk for SanDisk
SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs.

This has lead to several reports of users of that SSD where LPM
was working fine and who know have a significantly increased idle
power consumption on their laptops.

Likely there is another problem on the T450s from the original
reporter which gets exposed by the uncore reaching deeper sleep
states (higher PC-states) due to LPM being enabled. The problem as
reported, a hardfreeze about once a day, already did not sound like
it would be caused by LPM and the reports of the SSD working fine
confirm this. The original reporter is ok with dropping the quirk.

A X250 user has reported the same hard freeze problem and for him
the problem went away after unrelated updates, I suspect some GPU
driver stack changes fixed things.

TL;DR: The original reporters problem were triggered by LPM but not
an LPM issue, so drop the quirk for the SSD in question.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207
Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com>
Reported-by: Lorenzo Dalrio <lorenzo.dalrio@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Richard W.M. Jones" <rjones@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: zpodd: small read overflow in eject_tray()

commit 18c9a99bce2a57dfd7e881658703b5d7469cc7b9 upstream.

We read from the cdb[] buffer in ata_exec_internal_sg().  It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.

Fixes: 213342053db5 ("libata: handle power transition of ODD")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: zpodd: make arrays cdb static, reduces object code size

commit 795ef788145ed2fa023efdf11e8d5d7bedc21462 upstream.

Don't populate the arrays cdb on the stack, instead make them static.
Makes the object code smaller by 230 bytes:

Before:
   text    data     bss     dec     hex filename
   3797     240       0    4037     fc5 drivers/ata/libata-zpodd.o

After:
   text    data     bss     dec     hex filename
   3407     400       0    3807     edf drivers/ata/libata-zpodd.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Fix new policy initialization during limits updates via sysfs

commit c7d1f119c48f64bebf0fa1e326af577c6152fe30 upstream.

If the policy limits are updated via cpufreq_update_policy() and
subsequently via sysfs, the limits stored in user_policy may be
set incorrectly.

For example, if both min and max are set via sysfs to the maximum
available frequency, user_policy.min and user_policy.max will also
be the maximum.  If a policy notifier triggered by
cpufreq_update_policy() lowers both the min and the max at this
point, that change is not reflected by the user_policy limits, so
if the max is updated again via sysfs to the same lower value,
then user_policy.max will be lower than user_policy.min which
shouldn't happen.  In particular, if one of the policy CPUs is
then taken offline and back online, cpufreq_set_policy() will
fail for it due to a failing limits check.

To prevent that from happening, initialize the min and max fields
of the new_policy object to the ones stored in user_policy that
were previously set via sysfs.

Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: add dock and led support for HP ProBook 640 G4

commit 7eef32c1ef895a3a96463f9cbd04203007cd5555 upstream.

This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP ProBook 640 G4

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: add dock and led support for HP EliteBook 830 G5

commit 2861751f67b91e1d24e68010ced96614fb3140f4 upstream.

This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP EliteBook 830 G5

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream()

commit a3aa60d511746bd6c0d0366d4eb90a7998bcde8b upstream.

When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is
created without setting its operators via 'snd_pcm_set_ops()'. Following
operations on the new pcm instance can trigger kernel null pointer dereferences
and cause kernel oops.

This bug was found with my work on building a gray-box fault-injection tool for
linux-kernel-module binaries. A kernel null pointer dereference was confirmed
from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in
file 'sound/core/pcm_native.c'.

This patch fixes the bug by calling 'snd_device_free()' in the error handling
path of 'kzalloc()', which removes the new pcm instance from the snd card before
returns with an error code.

Signed-off-by: Bo Chen <chenbo@pdx.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: scrub: Don't use inode pages for device replace

commit ac0b4145d662a3b9e34085dea460fb06ede9b69b upstream.

[BUG]
Btrfs can create compressed extent without checksum (even though it
shouldn't), and if we then try to replace device containing such extent,
the result device will contain all the uncompressed data instead of the
compressed one.

Test case already submitted to fstests:
https://patchwork.kernel.org/patch/10442353/

[CAUSE]
When handling compressed extent without checksum, device replace will
goe into copy_nocow_pages() function.

In that function, btrfs will get all inodes referring to this data
extents and then use find_or_create_page() to get pages direct from that
inode.

The problem here is, pages directly from inode are always uncompressed.
And for compressed data extent, they mismatch with on-disk data.
Thus this leads to corrupted compressed data extent written to replace
device.

[FIX]
In this attempt, we could just remove the "optimization" branch, and let
unified scrub_pages() to handle it.

Although scrub_pages() won't bother reusing page cache, it will be a
little slower, but it does the correct csum checking and won't cause
such data corruption caused by "optimization".

Note about the fix: this is the minimal fix that can be backported to
older stable trees without conflicts. The whole callchain from
copy_nocow_pages() can be deleted, and will be in followup patches.

Fixes: ff023aac3119 ("Btrfs: add code to scrub to copy read data to another disk")
CC: stable@vger.kernel.org # 4.4+
Reported-by: James Harvey <jamespharvey20@gmail.com>
Reviewed-by: James Harvey <jamespharvey20@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ remove code removal, add note why ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Don't ignore class_dir_create_and_add() failure.

commit 84d0c27d6233a9ba0578b20f5a09701eb66cee42 upstream.

syzbot is hitting WARN() at kernfs_add_one() [1].
This is because kernfs_create_link() is confused by previous device_add()
call which continued without setting dev->kobj.parent field when
get_device_parent() failed by memory allocation fault injection.
Fix this by propagating the error from class_dir_create_and_add() to
the calllers of get_device_parent().

[1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116f

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+df47f81c226b31d89fb1@syzkaller.appspotmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix fencepost error in check for inode count overflow during resize

commit 4f2f76f751433908364ccff82f437a57d0e6e9b7 upstream.

ext4_resize_fs() has an off-by-one bug when checking whether growing of
a filesystem will not overflow inode count. As a result it allows a
filesystem with 8192 inodes per group to grow to 64TB which overflows
inode count to 0 and makes filesystem unusable. Fix it.

Cc: stable@vger.kernel.org
Fixes: 3f8a6411fbada1fa482276591e037f3b1adcf55b
Reported-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: update mtime in ext4_punch_hole even if no blocks are released

commit eee597ac931305eff3d3fd1d61d6aae553bc0984 upstream.

Currently in ext4_punch_hole we're going to skip the mtime update if
there are no actual blocks to release. However we've actually modified
the file by zeroing the partial block so the mtime should be updated.

Moreover the sync and datasync handling is skipped as well, which is
also wrong. Fix it.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Joe Habermann <joe.habermann@quantum.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: verify the checksum of the first data segment in a new connection

[ Upstream commit 4fd44a98ffe0d048246efef67ed640fdf2098a62 ]

commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash
table") introduced an optimization for the handling of child sockets
created for a new TCP connection.

But this optimization passes any data associated with the last ACK of the
connection handshake up the stack without verifying its checksum, because it
calls tcp_child_process(), which in turn calls tcp_rcv_state_process()
directly.  These lower-level processing functions do not do any checksum
verification.

Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to
fix this.

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: re-evaluate force_primary when the primary slave name changes

[ Upstream commit eb55bbf865d9979098c6a7a17cbdb41237ece951 ]

There is a timing issue under active-standy mode, when bond_enslave() is
called, bond->params.primary might not be initialized yet.

Any time the primary slave string changes, bond->force_primary should be
set to true to make sure the primary becomes the active slave.

Signed-off-by: Xiangning Yu <yuxiangning@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: fix remote wakeup racing with suspend

[ Upstream commit ebc3dd688cd988754a304147753b13e58de1b5a1 ]

It has been observed that writing 0xF2 to the power register while it
reads as 0xF4 results in the register having the value 0xF0, i.e. clearing
RESUME and setting SUSPENDM in one go does not work. It might also violate
the USB spec to transition directly from resume to suspend, especially
when not taking T_DRSMDN into account. But this is what happens when a
remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the
root hub and musb_bus_suspend being called.

This commit returns -EBUSY when musb_bus_suspend is called while remote
wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring
this error when musb_port_suspend is called from musb_hub_control is ok.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: make raid6 rebuild retry more

[ Upstream commit 8810f7517a3bc4ca2d41d022446d3f5fd6b77c09 ]

There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,

- the 1st retry is to rebuild with all other stripes, it'll eventually
  be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
  that it will do raid6 style rebuild,

however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.

This extends btrfs to do more retries and each retry fails only one
stripe.  Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.

The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: do not overshoot window_clamp in tcp_rcv_space_adjust()

commit 02db55718d53f9d426cee504c27fb768e9ed4ffe upstream.

While rcvbuf is properly clamped by tcp_rmem[2], rcvwin
is left to a potentially too big value.

It has no serious effect, since :
1) tcp_grow_window() has very strict checks.
2) window_clamp can be mangled by user space to any value anyway.

tcp_init_buffer_space() and companions use tcp_full_space(),
we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Benjamin Gilbert <benjamin.gilbert@coreos.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Btrfs: fix scrub to repair raid6 corruption"

This reverts commit 95b286daf7ba784191023ad110122703eb2ebabc.

This commit used an incorrect log message.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sonic: Use dma_mapping_error()

[ Upstream commit 26de0b76d9ba3200f09c6cb9d9618bda338be5f7 ]

With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the
message, "DMA-API: device driver failed to check map error".
Add the missing dma_mapping_error() call.

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qmi_wwan: Add Netgear Aircard 779S

[ Upstream commit 2415f3bd059fe050eb98aedf93664d000ceb4e92 ]

Add support for Netgear Aircard 779S

Signed-off-by: Josh Hill <josh@joshuajhill.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

atm: zatm: fix memcmp casting

[ Upstream commit f9c6442a8f0b1dde9e755eb4ff6fa22bcce4eabc ]

memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One
can lose significant bits and get 0 from non-0 value returned by the
memcmp().

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvs: fix buffer overflow with sync daemon and service

[ Upstream commit 52f96757905bbf0edef47f3ee6c7c784e7f8ff8a ]

syzkaller reports for buffer overflow for interface name
when starting sync daemons [1]

What we do is that we copy user structure into larger stack
buffer but later we search NUL past the stack buffer.
The same happens for sched_name when adding/editing virtual server.

We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN
being used as size in include/uapi/linux/ip_vs.h, so they
include the space for NUL.

As using strlcpy is wrong for unsafe source, replace it with
strscpy and add checks to return EINVAL if source string is not
NUL-terminated. The incomplete strlcpy fix comes from 2.6.13.

For the netlink interface reduce the len parameter for
IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME,
so that we get proper EINVAL.

[1]
kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:ffff8801c976f800 EFLAGS: 00010282
RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000
RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6
RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0
R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20
R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b
FS:  00007fd99f75e700(0000) GS:ffff8801daf00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  strlen include/linux/string.h:270 [inline]
  strlcpy include/linux/string.h:293 [inline]
  do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388
  nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
  nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115
  ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253
  udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487
  ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917
  tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057
  sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046
  __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
  __do_sys_setsockopt net/socket.c:1914 [inline]
  __se_sys_setsockopt net/socket.c:1911 [inline]
  __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x447369
RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369
RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000
R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0
R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb
de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90
90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800

Reported-and-tested-by: syzbot+aac887f77319868646df@syzkaller.appspotmail.com
Fixes: e4ff67513096 ("ipvs: add sync_maxlen parameter for the sync daemon")
Fixes: 4da62fc70d7c ("[IPVS]: Fix for overflows")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ebtables: handle string from userspace with care

[ Upstream commit 94c752f99954797da583a84c4907ff19e92550a4 ]

strlcpy() can't be safely used on a user-space provided string,
as it can try to read beyond the buffer's end, if the latter is
not NULL terminated.

Leveraging the above, syzbot has been able to trigger the following
splat:

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300
[inline]
BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user
net/bridge/netfilter/ebtables.c:1957 [inline]
BUG: KASAN: stack-out-of-bounds in ebt_size_mwt
net/bridge/netfilter/ebtables.c:2059 [inline]
BUG: KASAN: stack-out-of-bounds in size_entry_mwt
net/bridge/netfilter/ebtables.c:2155 [inline]
BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0
net/bridge/netfilter/ebtables.c:2194
Write of size 33 at addr ffff8801b0abf888 by task syz-executor0/4504

CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #40
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  check_memory_region_inline mm/kasan/kasan.c:260 [inline]
  check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
  memcpy+0x37/0x50 mm/kasan/kasan.c:303
  strlcpy include/linux/string.h:300 [inline]
  compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline]
  ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline]
  size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline]
  compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194
  compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285
  compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367
  compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline]
  compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156
  compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279
  inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041
  compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901
  compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050
  __compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403
  __do_compat_sys_setsockopt net/compat.c:416 [inline]
  __se_compat_sys_setsockopt net/compat.c:413 [inline]
  __ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413
  do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline]
  do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394
  entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7fb3cb9
RSP: 002b:00000000fff0c26c EFLAGS: 00000282 ORIG_RAX: 000000000000016e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000080 RSI: 0000000020000300 RDI: 00000000000005f4
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

The buggy address belongs to the page:
page:ffffea0006c2afc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x2fffc0000000000()
raw: 02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: 0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Fix the issue replacing the unsafe function with strscpy() and
taking care of possible errors.

Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-and-tested-by: syzbot+4e42a04e0bc33cb6c087@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm6: avoid potential infinite loop in _decode_session6()

[ Upstream commit d9f92772e8ec388d070752ee8f187ef8fa18621f ]

syzbot found a way to trigger an infinitie loop by overflowing
@offset variable that has been forced to use u16 for some very
obscure reason in the past.

We probably want to look at NEXTHDR_FRAGMENT handling which looks
wrong, in a separate patch.

In net-next, we shall try to use skb_header_pointer() instead of
pskb_may_pull().

watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553]
Modules linked in:
irq event stamp: 13885653
hardirqs last  enabled at (13885652): [<ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b
hardirqs last disabled at (13885653): [<ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625
softirqs last  enabled at (13614028): [<ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline]
softirqs last  enabled at (13614028): [<ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825
softirqs last disabled at (13614032): [<ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942
CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline]
RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101
RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006
RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277
RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8
R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f
R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8
FS:  0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150
 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368
 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline]
 icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372
 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551
 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208
 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711
 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785
 napi_frags_finish net/core/dev.c:5226 [inline]
 napi_gro_frags+0x631/0xc40 net/core/dev.c:5299
 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951
 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996
 call_write_iter include/linux/fs.h:1784 [inline]
 do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680
 do_iter_write+0x185/0x5f0 fs/read_write.c:959
 vfs_writev+0x1c7/0x330 fs/read_write.c:1004
 do_writev+0x112/0x2f0 fs/read_write.c:1039
 __do_sys_writev fs/read_write.c:1112 [inline]
 __se_sys_writev fs/read_write.c:1109 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: syzbot+0053c8...@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.138

crypto: vmx - Remove overly verbose printk from AES init routines

commit 1411b5218adbcf1d45ddb260db5553c52e8d917c upstream.

In the vmx AES init routines we do a printk(KERN_INFO ...) to report
the fallback implementation we're using.

However with a slow console this can significantly affect the speed of
crypto operations. Using 'cryptsetup benchmark' the removal of the
printk() leads to a ~5x speedup for aes-cbc decryption.

So remove them.

Fixes: 8676590a1593 ("crypto: vmx - Adding AES routines for VMX module")
Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module")
Fixes: 4f7f60d312b3 ("crypto: vmx - Adding CTR routines for VMX module")
Fixes: cc333cd68dfa ("crypto: vmx - Adding GHASH routines for VMX module")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID

commit e6e7e9cd8eed0e18217c899843bffbe8c7dae564 upstream.

Add ELAN0612 to the list of supported touchpads; this ID is used in Lenovo
v330 14IKB devices.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199253
Signed-off-by: Johannes Wienke <languitar@semipol.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: goodix - add new ACPI id for GPD Win 2 touch screen

commit 5ca4d1ae9bad0f59bd6f851c39b19f5366953666 upstream.

GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp

Tested on a unit from the first production run sent to Indiegogo backers

Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access

commit 3c9fa24ca7c9c47605672916491f79e8ccacb9e6 upstream.

The functions that were used in the emulation of fxrstor, fxsave, sgdt and
sidt were originally meant for task switching, and as such they did not
check privilege levels.  This is very bad when the same functions are used
in the emulation of unprivileged instructions.  This is CVE-2018-10853.

The obvious fix is to add a new argument to ops->read_std and ops->write_std,
which decides whether the access is a "system" access or should use the
processor's CPL.

Fixes: 129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmw_balloon: fixing double free when batching mode is off

commit b23220fe054e92f616b82450fae8cd3ab176cc60 upstream.

The balloon.page field is used for two different purposes if batching is
on or off. If batching is on, the field point to the page which is used
to communicate with with the hypervisor. If it is off, balloon.page
points to the page that is about to be (un)locked.

Unfortunately, this dual-purpose of the field introduced a bug: when the
balloon is popped (e.g., when the machine is reset or the balloon driver
is explicitly removed), the balloon driver frees, unconditionally, the
page that is held in balloon.page.  As a result, if batching is
disabled, this leads to double freeing the last page that is sent to the
hypervisor.

The following error occurs during rmmod when kernel checkers are on, and
the balloon is not empty:

[   42.307653] ------------[ cut here ]------------
[   42.307657] Kernel BUG at ffffffffba1e4b28 [verbose debug info unavailable]
[   42.307720] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
[   42.312512] Modules linked in: vmw_vsock_vmci_transport vsock ppdev joydev vmw_balloon(-) input_leds serio_raw vmw_vmci parport_pc shpchp parport i2c_piix4 nfit mac_hid autofs4 vmwgfx drm_kms_helper hid_generic syscopyarea sysfillrect usbhid sysimgblt fb_sys_fops hid ttm mptspi scsi_transport_spi ahci mptscsih drm psmouse vmxnet3 libahci mptbase pata_acpi
[   42.312766] CPU: 10 PID: 1527 Comm: rmmod Not tainted 4.12.0+ #5
[   42.312803] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2016
[   42.313042] task: ffff9bf9680f8000 task.stack: ffffbfefc1638000
[   42.313290] RIP: 0010:__free_pages+0x38/0x40
[   42.313510] RSP: 0018:ffffbfefc163be98 EFLAGS: 00010246
[   42.313731] RAX: 000000000000003e RBX: ffffffffc02b9720 RCX: 0000000000000006
[   42.313972] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9bf97e08e0a0
[   42.314201] RBP: ffffbfefc163be98 R08: 0000000000000000 R09: 0000000000000000
[   42.314435] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffc02b97e4
[   42.314505] R13: ffffffffc02b9748 R14: ffffffffc02b9728 R15: 0000000000000200
[   42.314550] FS:  00007f3af5fec700(0000) GS:ffff9bf97e080000(0000) knlGS:0000000000000000
[   42.314599] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   42.314635] CR2: 00007f44f6f4ab24 CR3: 00000003a7d12000 CR4: 00000000000006e0
[   42.314864] Call Trace:
[   42.315774]  vmballoon_pop+0x102/0x130 [vmw_balloon]
[   42.315816]  vmballoon_exit+0x42/0xd64 [vmw_balloon]
[   42.315853]  SyS_delete_module+0x1e2/0x250
[   42.315891]  entry_SYSCALL_64_fastpath+0x23/0xc2
[   42.315924] RIP: 0033:0x7f3af5b0e8e7
[   42.315949] RSP: 002b:00007fffe6ce0148 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[   42.315996] RAX: ffffffffffffffda RBX: 000055be676401e0 RCX: 00007f3af5b0e8e7
[   42.316951] RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055be67640248
[   42.317887] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999
[   42.318845] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fffe6cdf130
[   42.319755] R13: 0000000000000000 R14: 0000000000000000 R15: 000055be676401e0
[   42.320606] Code: c0 74 1c f0 ff 4f 1c 74 02 5d c3 85 f6 74 07 e8 0f d8 ff ff 5d c3 31 f6 e8 c6 fb ff ff 5d c3 48 c7 c6 c8 0f c5 ba e8 58 be 02 00 <0f> 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 85 ff 75 01 c3 55 48
[   42.323462] RIP: __free_pages+0x38/0x40 RSP: ffffbfefc163be98
[   42.325735] ---[ end trace 872e008e33f81508 ]---

To solve the bug, we eliminate the dual purpose of balloon.page.

Fixes: f220a80f0c2e ("VMware balloon: add batching to the vmw_balloon.")
Cc: stable@vger.kernel.org
Reported-by: Oleksandr Natalenko <onatalen@redhat.com>
Signed-off-by: Gil Kupfer <gilkup@gmail.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: samsung: fix maxburst parameter for DMA transactions

commit aa2f80e752c75e593b3820f42c416ed9458fa73e upstream.

The best granularity of residue that DMA engine can report is in the BURST
units, so the serial driver must use MAXBURST = 1 and DMA_SLAVE_BUSWIDTH_1_BYTE
if it relies on exact number of bytes transferred by DMA engine.

Fixes: 62c37eedb74c ("serial: samsung: add dma reqest/release functions")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system

commit ce14e868a54edeb2e30cb7a7b104a2fc4b9d76ca upstream.

Int the next patch the emulator's .read_std and .write_std callbacks will
grow another argument, which is not needed in kvm_read_guest_virt and
kvm_write_guest_virt_system's callers.  Since we have to make separate
functions, let's give the currently existing names a nicer interface, too.

Fixes: 129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12)
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: introduce linear_{read,write}_system

commit 79367a65743975e5cac8d24d08eccc7fdae832b0 upstream.

Wrap the common invocation of ctxt->ops->read_std and ctxt->ops->write_std, so
as to have a smaller patch when the functions grow another argument.

Fixes: 129a72a0d3c8 ("KVM: x86: Introduce segmented_write_std", 2017-01-12)
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clarify (and fix) MAX_LFS_FILESIZE macros

commit 0cc3b0ec23ce4c69e1e890ed2b8d2fa932b14aad upstream.

We have a MAX_LFS_FILESIZE macro that is meant to be filled in by
filesystems (and other IO targets) that know they are 64-bit clean and
don't have any 32-bit limits in their IO path.

It turns out that our 32-bit value for that limit was bogus.  On 32-bit,
the VM layer is limited by the page cache to only 32-bit index values,
but our logic for that was confusing and actually wrong.  We used to
define that value to

(((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1)

which is actually odd in several ways: it limits the index to 31 bits,
and then it limits files so that they can't have data in that last byte
of a page that has the highest 31-bit index (ie page index 0x7fffffff).

Neither of those limitations make sense.  The index is actually the full
32 bit unsigned value, and we can use that whole full page.  So the
maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG".

However, we do wan tto avoid the maximum index, because we have code
that iterates over the page indexes, and we don't want that code to
overflow.  So the maximum size of a file on a 32-bit host should
actually be one page less than the full 32-bit index.

So the actual limit is ULONG_MAX << PAGE_SHIFT.  That means that we will
not actually be using the page of that last index (ULONG_MAX), but we
can grow a file up to that limit.

The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug
Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5
volume.  It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one
byte less), but the actual true VM limit is one page less than 16TiB.

This was invisible until commit c2a9737f45e2 ("vfs,mm: fix a dead loop
in truncate_inode_pages_range()"), which started applying that
MAX_LFS_FILESIZE limit to block devices too.

NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is
actually just the offset type itself (loff_t), which is signed.  But for
clarity, on 64-bit, just use the maximum signed value, and don't make
people have to count the number of 'f' characters in the hex constant.

So just use LLONG_MAX for the 64-bit case.  That was what the value had
been before too, just written out as a hex constant.

Fixes: c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
Reported-and-tested-by: Doug Nazar <nazard@nazar.ca>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael Tinoco <rafael.tinoco@linaro.org>
[backported to 4.4.y due to requests of failed LTP tests - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: No NULL owner

commit 7d18f0a14aa6a0d6bad39111c1fb655f07f71d59 upstream.

Sometimes a GPIO is fetched with NULL as parent device, and
that is just fine. So under these circumstances, avoid using
dev_name() to provide a name for the GPIO line.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/crypto, x86/fpu: Remove X86_FEATURE_EAGER_FPU #ifdef from the crc32c code

commit 02f39b2379fb81557ae864ec8f85421c0250c954 upstream.

The crypto code was checking both use_eager_fpu() and
defined(X86_FEATURE_EAGER_FPU).  The latter was nonsensical, so
remove it.  This will avoid breakage when we remove
X86_FEATURE_EAGER_FPU.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1475627678-20788-2-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_key: Always verify length of provided sadb_key

commit 4b66af2d6356a00e94bcdea3e7fea324e8b5c6f4 upstream.

Key extensions (struct sadb_key) include a user-specified number of key
bits.  The kernel uses that number to determine how much key data to copy
out of the message in pfkey_msg2xfrm_state().

The length of the sadb_key message must be verified to be long enough,
even in the case of SADB_X_AALG_NULL.  Furthermore, the sadb_key_len value
must be long enough to include both the key data and the struct sadb_key
itself.

Introduce a helper function verify_key_len(), and call it from
parse_exthdrs() where other exthdr types are similarly checked for
correctness.

Signed-off-by: Kevin Easton <kevin@guarana.org>
Reported-by: syzbot+5022a34ca5a3d49b84223653fab632dfb7b4cf37@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Fix math emulation in eager fpu mode

commit 4ecd16ec7059390b430af34bd8bc3ca2b5dcef9a upstream.

Systems without an FPU are generally old and therefore use lazy FPU
switching. Unsurprisingly, math emulation in eager FPU mode is a
bit buggy. Fix it.

There were two bugs involving kernel code trying to use the FPU
registers in eager mode even if they didn't exist and one BUG_ON()
that was incorrect.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/b4b8d112436bd6fab866e1b4011131507e8d7fbe.1453675014.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Fix FNSAVE usage in eagerfpu mode

commit 5ed73f40735c68d8a656b46d09b1885d3b8740ae upstream.

In eager fpu mode, having deactivated FPU without immediately
reloading some other context is illegal.  Therefore, to recover from
FNSAVE, we can't just deactivate the state -- we need to reload it
if we're not actively context switching.

We had this wrong in fpu__save() and fpu__copy().  Fix both.
__kernel_fpu_begin() was fine -- add a comment.

This fixes a warning triggerable with nofxsr eagerfpu=on.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/60662444e13c76f06e23c15c5dcdba31b4ac3d67.1453675014.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Hard-disable lazy FPU mode

commit ca6938a1cd8a1c5e861a99b67f84ac166fc2b9e7 upstream.

Since commit:

  58122bf1d856 ("x86/fpu: Default eagerfpu=on on all CPUs")

... in Linux 4.6, eager FPU mode has been the default on all x86
systems, and no one has reported any regressions.

This patch removes the ability to enable lazy mode: use_eager_fpu()
becomes "return true" and all of the FPU mode selection machinery is
removed.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pbonzini@redhat.com
Link: http://lkml.kernel.org/r/1475627678-20788-3-git-send-email-riel@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Fix eager-FPU handling on legacy FPU machines

commit 6e6867093de35141f0a76b66ac13f9f2e2c8e77a upstream.

i486 derived cores like Intel Quark support only the very old,
legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and
our FPU code wasn't handling the saving and restoring there
properly in the 'eagerfpu' case.

So after we made eagerfpu the default for all CPU types:

  58122bf1d856 x86/fpu: Default eagerfpu=on on all CPUs

these old FPU designs broke. First, Andy Shevchenko reported a splat:

  WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160

which was us trying to execute FXRSTOR on those machines even though
they don't support it.

After taking care of that, Bryan O'Donoghue reported that a simple FPU
test still failed because we weren't initializing the FPU state properly
on those machines.

Take care of all that.

Reported-and-tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off")

commit a65050c6f17e52442716138d48d0a47301a8344b upstream.

Leonid Shatz noticed that the SDM interpretation of the following
recent commit:

  394db20ca240741 ("x86/fpu: Disable AVX when eagerfpu is off")

... is incorrect and that the original behavior of the FPU code was correct.

Because AVX is not stated in CR0 TS bit description, it was mistakenly
believed to be not supported for lazy context switch. This turns out
to be false:

  Intel Software Developer's Manual Vol. 3A, Sec. 2.5 Control Registers:

   'TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the x87 FPU/
    MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch to be delayed until
    an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4 instruction is actually executed
    by the new task.'

  Intel Software Developer's Manual Vol. 2A, Sec. 2.4 Instruction Exception
  Specification:

   'AVX instructions refer to exceptions by classes that include #NM
    "Device Not Available" exception for lazy context switch.'

So revert the commit.

Reported-by: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457569734-3785-1-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Fix 'no387' regression

commit f363938c70a04e6bc99023a5e0c44ef7879b903f upstream.

After fixing FPU option parsing, we now parse the 'no387' boot option
too early: no387 clears X86_FEATURE_FPU before it's even probed, so
the boot CPU promptly re-enables it.

I suspect it gets even more confused on SMP.

Fix the probing code to leave X86_FEATURE_FPU off if it's been
disabled by setup_clear_cpu_cap().

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Fixes: 4f81cbafcce2 ("x86/fpu: Fix early FPU command-line parsing")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Default eagerfpu=on on all CPUs

commit 58122bf1d856a4ea9581d62a07c557d997d46a19 upstream.

We have eager and lazy FPU modes, introduced in:

  304bceda6a18 ("x86, fpu: use non-lazy fpu restore for processors supporting xsave")

The result is rather messy.  There are two code paths in almost all
of the FPU code, and only one of them (the eager case) is tested
frequently, since most kernel developers have new enough hardware
that we use eagerfpu.

It seems that, on any remotely recent hardware, eagerfpu is a win:
glibc uses SSE2, so laziness is probably overoptimistic, and, in any
case, manipulating TS is far slower that saving and restoring the
full state.  (Stores to CR0.TS are serializing and are poorly
optimized.)

To try to shake out any latent issues on old hardware, this changes
the default to eager on all CPUs.  If no performance or functionality
problems show up, a subsequent patch could remove lazy mode entirely.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/ac290de61bf08d9cfc2664a4f5080257ffc1075a.1453675014.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Disable AVX when eagerfpu is off

commit 394db20ca240741a08d472173db13d6f6a6e5a28 upstream.

When "eagerfpu=off" is given as a command-line input, the kernel
should disable AVX support.

The Task Switched bit used for lazy context switching does not
support AVX. If AVX is enabled without eagerfpu context
switching, one task's AVX state could become corrupted or leak
to other tasks. This is a bug and has bad security implications.

This only affects systems that have AVX/AVX2/AVX512 and this
issue will be found only when one actually uses AVX/AVX2/AVX512
_AND_ does eagerfpu=off.

Reference: Intel Software Developer's Manual Vol. 3A

Sec. 2.5 Control Registers:
TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the
x87 FPU/ MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch
to be delayed until an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4
instruction is actually executed by the new task.

Sec. 13.4.1 Using the TS Flag to Control the Saving of the X87
FPU and SSE State
When the TS flag is set, the processor monitors the instruction
stream for x87 FPU, MMX, SSE instructions. When the processor
detects one of these instructions, it raises a
device-not-available exeception (#NM) prior to executing the
instruction.

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-5-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Disable MPX when eagerfpu is off

commit a5fe93a549c54838063d2952dd9643b0b18aa67f upstream.

This issue is a fallout from the command-line parsing move.

When "eagerfpu=off" is given as a command-line input, the kernel
should disable MPX support. The decision for turning off MPX was
made in fpu__init_system_ctx_switch(), which is after the
selection of the XSAVE format. This patch fixes it by getting
that decision done earlier in fpu__init_system_xstate().

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-4-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/cpufeature: Remove unused and seldomly used cpu_has_xx macros

commit 362f924b64ba0f4be2ee0cb697690c33d40be721 upstream.

Those are stupid and code should use static_cpu_has_safe() or
boot_cpu_has() instead. Kill the least used and unused ones.

The remaining ones need more careful inspection before a conversion can
happen. On the TODO.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de
Cc: David Sterba <dsterba@suse.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Remove unused function cpu_has_ht_siblings()

commit ed29210cd6a67425026e78aa298fa434e11a74e3 upstream.

It is used nowhere.

Signed-off-by: Juergen Gross <jgross@suse.com>
Link: http://lkml.kernel.org/r/1447761943-770-1-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Fix early FPU command-line parsing

commit 4f81cbafcce2c603db7865e9d0e461f7947d77d4 upstream.

The function fpu__init_system() is executed before
parse_early_param(). This causes wrong FPU configuration. This
patch fixes this issue by parsing boot_command_line in the
beginning of fpu__init_system().

With all four patches in this series, each parameter disables
features as the following:

eagerfpu=off: eagerfpu, avx, avx2, avx512, mpx
no387: fpu
nofxsr: fxsr, fxsropt, xmm
noxsave: xsave, xsaveopt, xsaves, xsavec, avx, avx2, avx512,
mpx, xgetbv1 noxsaveopt: xsaveopt
noxsaves: xsaves

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-2-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.137

net: metrics: add proper netlink validation

[ Upstream commit 5b5e7a0de2bbf2a1afcd9f49e940010e9fb80d53 ]

Before using nla_get_u32(), better make sure the attribute
is of the proper size.

Code recently was changed, but bug has been there from beginning
of git.

BUG: KMSAN: uninit-value in rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746
CPU: 1 PID: 14139 Comm: syz-executor6 Not tainted 4.17.0-rc5+ #103
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084
 __msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686
 rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746
 fib_dump_info+0xc42/0x2190 net/ipv4/fib_semantics.c:1361
 rtmsg_fib+0x65f/0x8c0 net/ipv4/fib_semantics.c:419
 fib_table_insert+0x2314/0x2b50 net/ipv4/fib_trie.c:1287
 inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779
 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x455a09
RSP: 002b:00007faae5fd8c68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007faae5fd96d4 RCX: 0000000000455a09
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000013
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000005d0 R14: 00000000006fdc20 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:529
 fib_convert_metrics net/ipv4/fib_semantics.c:1056 [inline]
 fib_create_info+0x2d46/0x9dc0 net/ipv4/fib_semantics.c:1150
 fib_table_insert+0x3e4/0x2b50 net/ipv4/fib_trie.c:1146
 inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779
 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2753 [inline]
 __kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:988 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
 netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: a919525ad832 ("net: Move fib_convert_metrics to metrics file")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: broadcom: Fix bcm_write_exp()

[ Upstream commit 79fb218d97980d4fee9a64f4c8ff05289364ba25 ]

On newer PHYs, we need to select the expansion register to write with
setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior
to being migrated to generic code under bcm-phy-lib.c which
unfortunately used the older implementation from the BCM54xx days.

Fix this by creating an inline stub: bcm_write_exp_sel() which adds the
correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY
and BCM7xxx PHY drivers which require setting these bits.

broadcom.c is unchanged because some PHYs even use a different selector
method, so let them specify it directly (e.g: SerDes secondary selector).

Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: validate attributes in do_setlink()

[ Upstream commit 644c7eebbfd59e72982d11ec6cc7d39af12450ae ]

It seems that rtnl_group_changelink() can call do_setlink
while a prior call to validate_linkmsg(dev = NULL, ...) could
not validate IFLA_ADDRESS / IFLA_BROADCAST

Make sure do_setlink() calls validate_linkmsg() instead
of letting its callers having this responsibility.

With help from Dmitry Vyukov, thanks a lot !

BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:199 [inline]
BUG: KMSAN: uninit-value in eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline]
BUG: KMSAN: uninit-value in eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308
CPU: 1 PID: 8695 Comm: syz-executor3 Not tainted 4.17.0-rc5+ #103
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084
 __msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686
 is_valid_ether_addr include/linux/etherdevice.h:199 [inline]
 eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline]
 eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308
 dev_set_mac_address+0x261/0x530 net/core/dev.c:7157
 do_setlink+0xbc3/0x5fc0 net/core/rtnetlink.c:2317
 rtnl_group_changelink net/core/rtnetlink.c:2824 [inline]
 rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976
 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x455a09
RSP: 002b:00007fc07480ec68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fc07480f6d4 RCX: 0000000000455a09
RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000014
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000005d0 R14: 00000000006fdc20 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527
 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:478
 do_setlink+0xb84/0x5fc0 net/core/rtnetlink.c:2315
 rtnl_group_changelink net/core/rtnetlink.c:2824 [inline]
 rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976
 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315
 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2753 [inline]
 __kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:988 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
 netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: e7ed828f10bd ("netlink: support setting devgroup parameters")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

team: use netdev_features_t instead of u32

[ Upstream commit 25ea66544bfd1d9df1b7e1502f8717e85fa1e6e6 ]

This code was introduced in 2011 around the same time that we made
netdev_features_t a u64 type.  These days a u32 is not big enough to
hold all the potential features.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4: Fix irq-unsafe spinlock usage

[ Upstream commit d546b67cda015fb92bfee93d5dc0ceadb91deaee ]

spin_lock/unlock was used instead of spin_un/lock_irq
in a procedure used in process space, on a spinlock
which can be grabbed in an interrupt.

This caused the stack trace below to be displayed (on kernel
4.17.0-rc1 compiled with Lock Debugging enabled):

[  154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[  154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G          I
[  154.675856] -----------------------------------------------------
[  154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[  154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core]
[  154.700927]
and this task is already holding:
[  154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib]
[  154.718028] which would create a new lock dependency:
[  154.723705]  (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.}
[  154.731922]
but this new dependency connects a SOFTIRQ-irq-safe lock:
[  154.740798]  (&(&cq->lock)->rlock){..-.}
[  154.740800]
... which became SOFTIRQ-irq-safe at:
[  154.752163]   _raw_spin_lock_irqsave+0x3e/0x50
[  154.757163]   mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib]
[  154.762554]   ipoib_tx_poll+0x4a/0xf0 [ib_ipoib]
...
to a SOFTIRQ-irq-unsafe lock:
[  154.815603]  (&(&qp_table->lock)->rlock){+.+.}
[  154.815604]
... which became SOFTIRQ-irq-unsafe at:
[  154.827718] ...
[  154.827720]   _raw_spin_lock+0x35/0x50
[  154.833912]   mlx4_qp_lookup+0x1e/0x50 [mlx4_core]
[  154.839302]   mlx4_flow_attach+0x3f/0x3d0 [mlx4_core]

Since mlx4_qp_lookup() is called only in process space, we can
simply replace the spin_un/lock calls with spin_un/lock_irq calls.

Fixes: 6dc06c08bef1 ("net/mlx4: Fix the check in attaching steering rules")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix mask for physical address in ILT entry

[ Upstream commit fdd13dd350dda1826579eb5c333d76b14513b812 ]

ILT entry requires 12 bit right shifted physical address.
Existing mask for ILT entry of physical address i.e.
ILT_ENTRY_PHY_ADDR_MASK is not sufficient to handle 64bit
address because upper 8 bits of 64 bit address were getting
masked which resulted in completer abort error on
PCIe bus due to invalid address.

Fix that mask to handle 64bit physical address.

Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: fix reserve calculation

[ Upstream commit 9aad13b087ab0a588cd68259de618f100053360e ]

Commit b84bbaf7a6c8 ("packet: in packet_snd start writing at link
layer allocation") ensures that packet_snd always starts writing
the link layer header in reserved headroom allocated for this
purpose.

This is needed because packets may be shorter than hard_header_len,
in which case the space up to hard_header_len may be zeroed. But
that necessary padding is not accounted for in skb->len.

The fix, however, is buggy. It calls skb_push, which grows skb->len
when moving skb->data back. But in this case packet length should not
change.

Instead, call skb_reserve, which moves both skb->data and skb->tail
back, without changing length.

Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation")
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: cdc_mbim: add flag FLAG_SEND_ZLP

[ Upstream commit 9f7c728332e8966084242fcd951aa46583bc308c ]

Testing Telit LM940 with ICMP packets > 14552 bytes revealed that
the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc
mbim data interface won't be anymore responsive.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/packet: refine check for priv area size

[ Upstream commit eb73190f4fbeedf762394e92d6a4ec9ace684c88 ]

syzbot was able to trick af_packet again [1]

Various commits tried to address the problem in the past,
but failed to take into account V3 header size.

[1]

tpacket_rcv: packet too big, clamped from 72 to 4294967224. macoff=96
BUG: KASAN: use-after-free in prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
BUG: KASAN: use-after-free in prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
Write of size 2 at addr ffff8801cb62000e by task kworker/1:2/2106

CPU: 1 PID: 2106 Comm: kworker/1:2 Not tainted 4.17.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_store2_noabort+0x17/0x20 mm/kasan/report.c:436
 prb_run_all_ft_ops net/packet/af_packet.c:1016 [inline]
 prb_fill_curr_block.isra.59+0x4e5/0x5c0 net/packet/af_packet.c:1039
 __packet_lookup_frame_in_block net/packet/af_packet.c:1094 [inline]
 packet_current_rx_frame net/packet/af_packet.c:1117 [inline]
 tpacket_rcv+0x1866/0x3340 net/packet/af_packet.c:2282
 dev_queue_xmit_nit+0x891/0xb90 net/core/dev.c:2018
 xmit_one net/core/dev.c:3049 [inline]
 dev_hard_start_xmit+0x16b/0xc10 net/core/dev.c:3069
 __dev_queue_xmit+0x2724/0x34c0 net/core/dev.c:3584
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3617
 neigh_resolve_output+0x679/0xad0 net/core/neighbour.c:1358
 neigh_output include/net/neighbour.h:482 [inline]
 ip6_finish_output2+0xc9c/0x2810 net/ipv6/ip6_output.c:120
 ip6_finish_output+0x5fe/0xbc0 net/ipv6/ip6_output.c:154
 NF_HOOK_COND include/linux/netfilter.h:277 [inline]
 ip6_output+0x227/0x9b0 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ndisc_send_skb+0x100d/0x1570 net/ipv6/ndisc.c:491
 ndisc_send_ns+0x3c1/0x8d0 net/ipv6/ndisc.c:633
 addrconf_dad_work+0xbef/0x1340 net/ipv6/addrconf.c:4033
 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the page:
page:ffffea00072d8800 count:0 mapcount:-127 mapping:0000000000000000 index:0xffff8801cb620e80
flags: 0x2fffc0000000000()
raw: 02fffc0000000000 0000000000000000 ffff8801cb620e80 00000000ffffff80
raw: ffffea00072e3820 ffffea0007132d20 0000000000000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801cb61ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8801cb61ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8801cb620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                      ^
 ffff8801cb620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8801cb620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Fixes: 2b6867c2ce76 ("net/packet: fix overflow in check for priv area size")
Fixes: dc808110bb62 ("packet: handle too big packets for PACKET_V3")
Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netdev-FAQ: clarify DaveM's position for stable backports

[ Upstream commit 75d4e704fa8d2cf33ff295e5b441317603d7f9fd ]

Per discussion with David at netconf 2018, let's clarify
DaveM's position of handling stable backports in netdev-FAQ.

This is important for people relying on upstream -stable
releases.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isdn: eicon: fix a missing-check bug

[ Upstream commit 6009d1fe6ba3bb2dab55921da60465329cc1cd89 ]

In divasmain.c, the function divas_write() firstly invokes the function
diva_xdi_open_adapter() to open the adapter that matches with the adapter
number provided by the user, and then invokes the function diva_xdi_write()
to perform the write operation using the matched adapter. The two functions
diva_xdi_open_adapter() and diva_xdi_write() are located in diva.c.

In diva_xdi_open_adapter(), the user command is copied to the object 'msg'
from the userspace pointer 'src' through the function pointer 'cp_fn',
which eventually calls copy_from_user() to do the copy. Then, the adapter
number 'msg.adapter' is used to find out a matched adapter from the
'adapter_queue'. A matched adapter will be returned if it is found.
Otherwise, NULL is returned to indicate the failure of the verification on
the adapter number.

As mentioned above, if a matched adapter is returned, the function
diva_xdi_write() is invoked to perform the write operation. In this
function, the user command is copied once again from the userspace pointer
'src', which is the same as the 'src' pointer in diva_xdi_open_adapter() as
both of them are from the 'buf' pointer in divas_write(). Similarly, the
copy is achieved through the function pointer 'cp_fn', which finally calls
copy_from_user(). After the successful copy, the corresponding command
processing handler of the matched adapter is invoked to perform the write
operation.

It is obvious that there are two copies here from userspace, one is in
diva_xdi_open_adapter(), and one is in diva_xdi_write(). Plus, both of
these two copies share the same source userspace pointer, i.e., the 'buf'
pointer in divas_write(). Given that a malicious userspace process can race
to change the content pointed by the 'buf' pointer, this can pose potential
security issues. For example, in the first copy, the user provides a valid
adapter number to pass the verification process and a valid adapter can be
found. Then the user can modify the adapter number to an invalid number.
This way, the user can bypass the verification process of the adapter
number and inject inconsistent data.

This patch reuses the data copied in
diva_xdi_open_adapter() and passes it to diva_xdi_write(). This way, the
above issues can be avoided.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: remove warning in ip_recv_error

[ Upstream commit 730c54d59403658a62af6517338fa8d4922c1b28 ]

A precondition check in ip_recv_error triggered on an otherwise benign
race. Remove the warning.

The warning triggers when passing an ipv6 socket to this ipv4 error
handling function. RaceFuzzer was able to trigger it due to a race
in setsockopt IPV6_ADDRFORM.

  ---
  CPU0
    do_ipv6_setsockopt
      sk->sk_socket->ops = &inet_dgram_ops;

  ---
  CPU1
    sk->sk_prot->recvmsg
      udp_recvmsg
        ip_recv_error
          WARN_ON_ONCE(sk->sk_family == AF_INET6);

  ---
  CPU0
    do_ipv6_setsockopt
      sk->sk_family = PF_INET;

This socket option converts a v6 socket that is connected to a v4 peer
to an v4 socket. It updates the socket on the fly, changing fields in
sk as well as other structs. This is inherently non-atomic. It races
with the lockless udp_recvmsg path.

No other code makes an assumption that these fields are updated
atomically. It is benign here, too, as ip_recv_error cares only about
the protocol of the skbs enqueued on the error queue, for which
sk_family is not a precise predictor (thanks to another isue with
IPV6_ADDRFORM).

Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr
Fixes: 7ce875e5ecb8 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error")
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds

[ Upstream commit 848235edb5c93ed086700584c8ff64f6d7fc778d ]

Currently, raw6_sk(sk)->ip6mr_table is set unconditionally during
ip6_mroute_setsockopt(MRT6_TABLE). A subsequent attempt at the same
setsockopt will fail with -ENOENT, since we haven't actually created
that table.

A similar fix for ipv4 was included in commit 5e1859fbcc3c ("ipv4: ipmr:
various fixes and cleanups").

Fixes: d1db275dd3f6 ("ipv6: ip6mr: support multiple tables")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

enic: set DMA mask to 47 bit

[ Upstream commit 322eaa06d55ebc1402a4a8d140945cff536638b4 ]

In commit 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then
failover to DMA") DMA mask was changed from 40 bits to 64 bits.
Hardware actually supports only 47 bits.

Fixes: 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: don't free ccid2_hc_tx_sock struct in dccp_disconnect()

[ Upstream commit 2677d20677314101293e6da0094ede7b5526d2b1 ]

Syzbot reported the use-after-free in timer_is_static_object() [1].

This can happen because the structure for the rto timer (ccid2_hc_tx_sock)
is removed in dccp_disconnect(), and ccid2_hc_tx_rto_expire() can be
called after that.

The report [1] is similar to the one in commit 120e9dabaf55 ("dccp:
defer ccid_hc_tx_delete() at dismantle time"). And the fix is the same,
delay freeing ccid2_hc_tx_sock structure, so that it is freed in
dccp_sk_destruct().

[1]

==================================================================
BUG: KASAN: use-after-free in timer_is_static_object+0x80/0x90
kernel/time/timer.c:607
Read of size 8 at addr ffff8801bebb5118 by task syz-executor2/25299

CPU: 1 PID: 25299 Comm: syz-executor2 Not tainted 4.17.0-rc5+ #54
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  <IRQ>
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  timer_is_static_object+0x80/0x90 kernel/time/timer.c:607
  debug_object_activate+0x2d9/0x670 lib/debugobjects.c:508
  debug_timer_activate kernel/time/timer.c:709 [inline]
  debug_activate kernel/time/timer.c:764 [inline]
  __mod_timer kernel/time/timer.c:1041 [inline]
  mod_timer+0x4d3/0x13b0 kernel/time/timer.c:1102
  sk_reset_timer+0x22/0x60 net/core/sock.c:2742
  ccid2_hc_tx_rto_expire+0x587/0x680 net/dccp/ccids/ccid2.c:147
  call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
  expire_timers kernel/time/timer.c:1363 [inline]
  __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
  run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
  invoke_softirq kernel/softirq.c:365 [inline]
  irq_exit+0x1d1/0x200 kernel/softirq.c:405
  exiting_irq arch/x86/include/asm/apic.h:525 [inline]
  smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
  apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
  </IRQ>
...
Allocated by task 25374:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
  kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
  kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
  ccid_new+0x25b/0x3e0 net/dccp/ccid.c:151
  dccp_hdlr_ccid+0x27/0x150 net/dccp/feat.c:44
  __dccp_feat_activate+0x184/0x270 net/dccp/feat.c:344
  dccp_feat_activate_values+0x3a7/0x819 net/dccp/feat.c:1538
  dccp_create_openreq_child+0x472/0x610 net/dccp/minisocks.c:128
  dccp_v4_request_recv_sock+0x12c/0xca0 net/dccp/ipv4.c:408
  dccp_v6_request_recv_sock+0x125d/0x1f10 net/dccp/ipv6.c:415
  dccp_check_req+0x455/0x6a0 net/dccp/minisocks.c:197
  dccp_v4_rcv+0x7b8/0x1f3f net/dccp/ipv4.c:841
  ip_local_deliver_finish+0x2e3/0xd80 net/ipv4/ip_input.c:215
  NF_HOOK include/linux/netfilter.h:288 [inline]
  ip_local_deliver+0x1e1/0x720 net/ipv4/ip_input.c:256
  dst_input include/net/dst.h:450 [inline]
  ip_rcv_finish+0x81b/0x2200 net/ipv4/ip_input.c:396
  NF_HOOK include/linux/netfilter.h:288 [inline]
  ip_rcv+0xb70/0x143d net/ipv4/ip_input.c:492
  __netif_receive_skb_core+0x26f5/0x3630 net/core/dev.c:4592
  __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4657
  process_backlog+0x219/0x760 net/core/dev.c:5337
  napi_poll net/core/dev.c:5735 [inline]
  net_rx_action+0x7b7/0x1930 net/core/dev.c:5801
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285

Freed by task 25374:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
  kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
  __cache_free mm/slab.c:3498 [inline]
  kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
  ccid_hc_tx_delete+0xc3/0x100 net/dccp/ccid.c:190
  dccp_disconnect+0x130/0xc66 net/dccp/proto.c:286
  dccp_close+0x3bc/0xe60 net/dccp/proto.c:1045
  inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
  inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
  sock_release+0x96/0x1b0 net/socket.c:594
  sock_close+0x16/0x20 net/socket.c:1149
  __fput+0x34d/0x890 fs/file_table.c:209
  ____fput+0x15/0x20 fs/file_table.c:243
  task_work_run+0x1e4/0x290 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:191 [inline]
  exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166
  prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
  do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801bebb4cc0
  which belongs to the cache ccid2_hc_tx_sock of size 1240
The buggy address is located 1112 bytes inside of
  1240-byte region [ffff8801bebb4cc0, ffff8801bebb5198)
The buggy address belongs to the page:
page:ffffea0006faed00 count:1 mapcount:0 mapping:ffff8801bebb41c0
index:0xffff8801bebb5240 compound_mapcount: 0
flags: 0x2fffc0000008100(slab|head)
raw: 02fffc0000008100 ffff8801bebb41c0 ffff8801bebb5240 0000000100000003
raw: ffff8801cdba3138 ffffea0007634120 ffff8801cdbaab40 0000000000000000
page dumped because: kasan: bad access detected
...
==================================================================

Reported-by: syzbot+5d47e9ec91a6f15dbd6f@syzkaller.appspotmail.com
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: use the right constant

[ Upstream commit dd612f18a49b63af8b3a5f572d999bdb197385bc ]

Nearby code that also tests port suggests that the P0 constant should be
used when port is zero.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1;
@@

* e ? e1 : e1
// </smpl>

Fixes: 6c3218c6f7e5 ("bnx2x: Adjust ETS to 578xx")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Fix check for ISO3166 code

commit 9b9322db5c5a1917a66c71fe47c3848a9a31227e upstream.

The commit "regulatory: add NUL to request alpha2" increases the length of
alpha2 to 3. This causes a regression on brcmfmac, because
brcmf_cfg80211_reg_notifier() expect valid ISO3166 codes in the complete
array. So fix this accordingly.

Fixes: 657308f73e67 ("regulatory: add NUL to request alpha2")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 4.4: adjust filename]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: set FMODE_UNSIGNED_OFFSET for drm files

commit 76ef6b28ea4f81c3d511866a9b31392caa833126 upstream.

Since we have the ttm and gem vma managers using a subset
of the file address space for objects, and these start at
0x100000000 they will overflow the new mmap checks.

I've checked all the mmap routines I could see for any
bad behaviour but overall most people use GEM/TTM VMA
managers even the legacy drivers have a hashtable.

Reported-and-Tested-by: Arthur Marsh (amarsh04 on #radeon)
Fixes: be83bbf8068 (mmap: introduce sane default mmap limits)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix incorrect log_flushed on fsync

commit 47c7d0b19502583120c3f396c7559e7a77288a68 upstream.

When calling into _xfs_log_force{,_lsn}() with a pointer
to log_flushed variable, log_flushed will be set to 1 if:
1. xlog_sync() is called to flush the active log buffer
AND/OR
2. xlog_wait() is called to wait on a syncing log buffers

xfs_file_fsync() checks the value of log_flushed after
_xfs_log_force_lsn() call to optimize away an explicit
PREFLUSH request to the data block device after writing
out all the file's pages to disk.

This optimization is incorrect in the following sequence of events:

 Task A                    Task B
 -------------------------------------------------------
 xfs_file_fsync()
   _xfs_log_force_lsn()
     xlog_sync()
        [submit PREFLUSH]
                           xfs_file_fsync()
                             file_write_and_wait_range()
                               [submit WRITE X]
                               [endio  WRITE X]
                             _xfs_log_force_lsn()
                               xlog_wait()
        [endio  PREFLUSH]

The write X is not guarantied to be on persistent storage
when PREFLUSH request in completed, because write A was submitted
after the PREFLUSH request, but xfs_file_fsync() of task A will
be notified of log_flushed=1 and will skip explicit flush.

If the system crashes after fsync of task A, write X may not be
present on disk after reboot.

This bug was discovered and demonstrated using Josef Bacik's
dm-log-writes target, which can be used to record block io operations
and then replay a subset of these operations onto the target device.
The test goes something like this:
- Use fsx to execute ops of a file and record ops on log device
- Every now and then fsync the file, store md5 of file and mark
  the location in the log
- Then replay log onto device for each mark, mount fs and compare
  md5 of file to stored value

Cc: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <jbacik@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kconfig: Avoid format overflow warning from GCC 8.1

commit 2ae89c7a82ea9d81a19b4fc2df23bef4b112f24e upstream.

In file included from scripts/kconfig/zconf.tab.c:2485:
scripts/kconfig/confdata.c: In function ‘conf_write’:
scripts/kconfig/confdata.c:773:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
  sprintf(newname, "%s%s", dirname, basename);
                      ^~
scripts/kconfig/confdata.c:773:19: note: assuming directive output of 7 bytes
  sprintf(newname, "%s%s", dirname, basename);
                   ^~~~~~
scripts/kconfig/confdata.c:773:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097
  sprintf(newname, "%s%s", dirname, basename);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
scripts/kconfig/confdata.c:776:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
                       ^~~~~~~~~~~
scripts/kconfig/confdata.c:776:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097
   sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid());
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Increase the size of tmpname and newname to make GCC happy.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmap: relax file size limit for regular files

commit 423913ad4ae5b3e8fb8983f70969fb522261ba26 upstream.

Commit be83bbf80682 ("mmap: introduce sane default mmap limits") was
introduced to catch problems in various ad-hoc character device drivers
doing mmap and getting the size limits wrong.  In the process, it used
"known good" limits for the normal cases of mapping regular files and
block device drivers.

It turns out that the "s_maxbytes" limit was less "known good" than I
thought.  In particular, /proc doesn't set it, but exposes one regular
file to mmap: /proc/vmcore.  As a result, that file got limited to the
default MAX_INT s_maxbytes value.

This went unnoticed for a while, because apparently the only thing that
needs it is the s390 kernel zfcpdump, but there might be other tools
that use this too.

Vasily suggested just changing s_maxbytes for all of /proc, which isn't
wrong, but makes me nervous at this stage.  So instead, just make the
new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't
affect anything else.  It wasn't the regular file case I was worried
about.

I'd really prefer for maxsize to have been per-inode, but that is not
how things are today.

Fixes: be83bbf80682 ("mmap: introduce sane default mmap limits")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmap: introduce sane default mmap limits

commit be83bbf806822b1b89e0a0f23cd87cddc409e429 upstream.

The internal VM "mmap()" interfaces are based on the mmap target doing
everything using page indexes rather than byte offsets, because
traditionally (ie 32-bit) we had the situation that the byte offset
didn't fit in a register.  So while the mmap virtual address was limited
by the word size of the architecture, the backing store was not.

So we're basically passing "pgoff" around as a page index, in order to
be able to describe backing store locations that are much bigger than
the word size (think files larger than 4GB etc).

But while this all makes a ton of sense conceptually, we've been dogged
by various drivers that don't really understand this, and internally
work with byte offsets, and then try to work with the page index by
turning it into a byte offset with "pgoff << PAGE_SHIFT".

Which obviously can overflow.

Adding the size of the mapping to it to get the byte offset of the end
of the backing store just exacerbates the problem, and if you then use
this overflow-prone value to check various limits of your device driver
mmap capability, you're just setting yourself up for problems.

The correct thing for drivers to do is to do their limit math in page
indices, the way the interface is designed.  Because the generic mmap
code _does_ test that the index doesn't overflow, since that's what the
mmap code really cares about.

HOWEVER.

Finding and fixing various random drivers is a sisyphean task, so let's
just see if we can just make the core mmap() code do the limiting for
us.  Realistically, the only "big" backing stores we need to care about
are regular files and block devices, both of which are known to do this
properly, and which have nice well-defined limits for how much data they
can access.

So let's special-case just those two known cases, and then limit other
random mmap users to a backing store that still fits in "unsigned long".
Realistically, that's not much of a limit at all on 64-bit, and on
32-bit architectures the only worry might be the GPU drivers, which can
have big physical address spaces.

To make it possible for drivers like that to say that they are 64-bit
clean, this patch does repurpose the "FMODE_UNSIGNED_OFFSET" bit in the
file flags to allow drivers to mark their file descriptors as safe in
the full 64-bit mmap address space.

[ The timing for doing this is less than optimal, and this should really
  go in a merge window. But realistically, this needs wide testing more
  than it needs anything else, and being main-line is the only way to do
  that.

  So the earlier the better, even if it's outside the proper development
  cycle        - Linus ]

Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: self test failure should not cause suspend to fail

commit 0803d7befa15cab5717d667a97a66214d2a4c083 upstream.

The Acer Acer Veriton X4110G has a TPM device detected as:
  tpm_tis 00:0b: 1.2 TPM (device-id 0xFE, rev-id 71)

After the first S3 suspend, the following error appears during resume:
  tpm tpm0: A TPM error(38) occurred continue selftest

Any following S3 suspend attempts will now fail with this error:
  tpm tpm0: Error (38) sending savestate before suspend
  PM: Device 00:0b failed to suspend: error 38

Error 38 is TPM_ERR_INVALID_POSTINIT which means the TPM is
not in the correct state. This indicates that the platform BIOS
is not sending the usual TPM_Startup command during S3 resume.
>From this point onwards, all TPM commands will fail.

The same issue was previously reported on Foxconn 6150BK8MC and
Sony Vaio TX3.

The platform behaviour seems broken here, but we should not break
suspend/resume because of this.

When the unexpected TPM state is encountered, set a flag to skip the
affected TPM_SaveState command on later suspends.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: http://lkml.kernel.org/r/CAB4CAwfSCvj1cudi+MWaB5g2Z67d9DwY1o475YOZD64ma23UiQ@mail.gmail.com
Link: https://lkml.org/lkml/2011/3/28/192
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591031
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: do not suspend/resume if power stays on

commit b5d0ebc99bf5d0801a5ecbe958caa3d68b8eaee8 upstream.

The suspend/resume behavior of the TPM can be controlled by setting
"powered-while-suspended" in the DTS. This is useful for the cases
when hardware does not power-off the TPM.

Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.136

sparc64: Fix build warnings with gcc 7.

commit 0fde7ad71ee371ede73b3f326e58f9e8d102feb6 upstream.

arch/sparc/kernel/ds.c: In function ‘register_services’:
arch/sparc/kernel/ds.c:912:3: error: ‘strcpy’: writing at least 1 byte
into a region of size 0 overflows the destination

Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix the NULL mapping case in __isolate_lru_page()

commit 145e1a71e090575c74969e3daa8136d1e5b99fc8 upstream.

George Boole would have noticed a slight error in 4.16 commit
69d763fc6d3a ("mm: pin address_space before dereferencing it while
isolating an LRU page").  Fix it, to match both the comment above it,
and the original behaviour.

Although anonymous pages are not marked PageDirty at first, we have an
old habit of calling SetPageDirty when a page is removed from swap
cache: so there's a category of ex-swap pages that are easily
migratable, but were inadvertently excluded from compaction's async
migration in 4.16.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805302014001.12558@eggly.anvils
Fixes: 69d763fc6d3a ("mm: pin address_space before dereferencing it while isolating an LRU page")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Ivan Kalvachev <ikalvachev@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix io_destroy()/aio_complete() race

commit 4faa99965e027cc057c5145ce45fa772caa04e8d upstream.

If io_destroy() gets to cancelling everything that can be cancelled and
gets to kiocb_cancel() calling the function driver has left in ->ki_cancel,
it becomes vulnerable to a race with IO completion.  At that point req
is already taken off the list and aio_complete() does *NOT* spin until
we (in free_ioctx_users()) releases ->ctx_lock.  As the result, it proceeds
to kiocb_free(), freing req just it gets passed to ->ki_cancel().

Fix is simple - remove from the list after the call of kiocb_cancel().  All
instances of ->ki_cancel() already have to cope with the being called with
iocb still on list - that's what happens in io_cancel(2).

Cc: stable@kernel.org
Fixes: 0460fef2a921 "aio: use cancellation list lazily"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kbuild: change CC_OPTIMIZE_FOR_SIZE definition

commit 877417e6ffb9578e8580abf76a71e15732473456 upstream.

CC_OPTIMIZE_FOR_SIZE disables the often useful -Wmaybe-unused warning,
because that causes a ridiculous amount of false positives when combined
with -Os.

This means a lot of warnings don't show up in testing by the developers
that should see them with an 'allmodconfig' kernel that has
CC_OPTIMIZE_FOR_SIZE enabled, but only later in randconfig builds
that don't.

This changes the Kconfig logic around CC_OPTIMIZE_FOR_SIZE to make
it a 'choice' statement defaulting to CC_OPTIMIZE_FOR_PERFORMANCE
that gets added for this purpose. The allmodconfig and allyesconfig
kernels now default to -O2 with the maybe-unused warning enabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Disable LVDS on Radiant P845

commit b3fb22733ae61050f8d10a1d6a8af176c5c5db1a upstream.

Radiant P845 does not have LVDS, only VGA.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105468
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309222204.4771-1-linux@rainbow-software.org
(cherry picked from commit 7f7105f99b75aca4f8c2a748ed6b82c7f8be3293)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwtracing: stm: fix build error on some arches

commit 806e30873f0e74d9d41b0ef761bd4d3e55c7d510 upstream.

Commit b5e2ced9bf81 ("stm class: Use vmalloc for the master map") caused
a build error on some arches as vmalloc.h was not explicitly included.

Fix that by adding it to the list of includes.

Fixes: b5e2ced9bf81 ("stm class: Use vmalloc for the master map")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Use vmalloc for the master map

commit b5e2ced9bf81393034072dd4d372f6b430bc1f0a upstream.

Fengguang is running into a warning from the buddy allocator:

> swapper/0: page allocation failure: order:9, mode:0x14040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc1 #262
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> Call Trace:
...
>  __kmalloc+0x14b/0x180: ____cache_alloc at mm/slab.c:3127
>  stm_register_device+0xf3/0x5c0: stm_register_device at drivers/hwtracing/stm/core.c:695
...

Which is basically a result of the stm class trying to allocate ~512kB
for the dummy_stm with its default parameters. There's no reason, however,
for it not to be vmalloc()ed instead, which is what this patch does.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
CC: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_transport_srp: Fix shost to rport translation

commit c9ddf73476ff4fffb7a87bd5107a0705bf2cf64b upstream.

Since an SRP remote port is attached as a child to shost->shost_gendev
and as the only child, the translation from the shost pointer into an
rport pointer must happen by looking up the shost child that is an
rport. This patch fixes the following KASAN complaint:

BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp]
Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19

CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1
Workqueue: kblockd blk_mq_timeout_work
Call Trace:
dump_stack+0x85/0xc7
print_address_description+0x65/0x270
kasan_report+0x231/0x350
srp_timed_out+0x57/0x110 [scsi_transport_srp]
scsi_times_out+0xc7/0x3f0 [scsi_mod]
blk_mq_terminate_expired+0xc2/0x140
bt_iter+0xbc/0xd0
blk_mq_queue_tag_busy_iter+0x1c7/0x350
blk_mq_timeout_work+0x325/0x3f0
process_one_work+0x441/0xa50
worker_thread+0x76/0x6c0
kthread+0x1b2/0x1d0
ret_from_fork+0x24/0x30

Fixes: e68ca75200fe ("scsi_transport_srp: Reduce failover time")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests

commit 28e4213dd331e944e7fca1954a946829162ed9d4 upstream.

Having PR_FP_MODE_FRE (i.e. Config5.FRE) set without PR_FP_MODE_FR (i.e.
Status.FR) is not supported as the lone purpose of Config5.FRE is to
emulate Status.FR=0 handling on FPU hardware that has Status.FR=1
hardwired[1][2].  Also we do not handle this case elsewhere, and assume
throughout our code that TIF_HYBRID_FPREGS and TIF_32BIT_FPREGS cannot
be set both at once for a task, leading to inconsistent behaviour if
this does happen.

Return unsuccessfully then from prctl(2) PR_SET_FP_MODE calls requesting
PR_FP_MODE_FRE to be set with PR_FP_MODE_FR clear.  This corresponds to
modes allowed by `mips_set_personality_fp'.

References:

[1] "MIPS Architecture For Programmers, Vol. III: MIPS32 / microMIPS32
    Privileged Resource Architecture", Imagination Technologies,
    Document Number: MD00090, Revision 6.02, July 10, 2015, Table 9.69
    "Config5 Register Field Descriptions", p. 262

[2] "MIPS Architecture For Programmers, Volume III: MIPS64 / microMIPS64
    Privileged Resource Architecture", Imagination Technologies,
    Document Number: MD00091, Revision 6.03, December 22, 2015, Table
    9.72 "Config5 Register Field Descriptions", p. 288

Fixes: 9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/19327/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs

commit c7e814628df65f424fe197dde73bfc67e4a244d7 upstream.

Use 64-bit accesses for 64-bit floating-point general registers with
PTRACE_PEEKUSR, removing the truncation of their upper halves in the
FR=1 mode, caused by commit bbd426f542cb ("MIPS: Simplify FP context
access"), which inadvertently switched them to using 32-bit accesses.

The PTRACE_POKEUSR side is fine as it's never been broken and continues
using 64-bit accesses.

Fixes: bbd426f542cb ("MIPS: Simplify FP context access")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/19334/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:kfifo_buf: check for uint overflow

commit 3d13de4b027d5f6276c0f9d3a264f518747d83f2 upstream.

Currently, the following causes a kernel OOPS in memcpy:

echo 1073741825 > buffer/length
echo 1 > buffer/enable

Note that using 1073741824 instead of 1073741825 causes "write error:
Cannot allocate memory" but no OOPS.

This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo
rounds up to the nearest power of 2, it will actually call kmalloc with
roundup_pow_of_two(length) * bytes_per_datum.

Using length == 1073741825 and bytes_per_datum == 2, we get:

kmalloc(roundup_pow_of_two(1073741825) * 2
or kmalloc(2147483648 * 2)
or kmalloc(4294967296)
or kmalloc(UINT_MAX + 1)

so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and
subsequent memcpy to fail once the device is enabled.

Fix this by checking for overflow prior to allocating a kfifo. With this
check added, the above code returns -EINVAL when enabling the buffer,
rather than causing an OOPS.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: usb-dmac: fix endless loop in usb_dmac_chan_terminate_all()

commit d9f5efade2cfd729138a7cafb46d01044da40f5e upstream.

This patch fixes an issue that list_for_each_entry() in
usb_dmac_chan_terminate_all() is possible to cause endless loop because
this will move own desc to the desc_freed. So, this driver should use
list_for_each_entry_safe() instead of list_for_each_entry().

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: revoke START request early

commit 52df445f29b79006d8b2dcd129152987c0d3bd64 upstream.

If we don't clear START generation as soon as possible, it may cause
another message to be generated, e.g. when receiving NACK in address
phase. To keep the race window as small as possible, we clear it right
at the beginning of the interrupt. We don't need any checks since we
always want to stop START and STOP generation on the next occasion after
we started it.

This patch improves the situation but sadly does not completely fix it.
It is still to be researched if we can do better given this HW design.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: check master irqs before slave irqs

commit c3be0af15959e11fa535d5332ab3d7cf34abd09b upstream.

Due to the HW design, master IRQs are timing critical, so give them
precedence over slave IRQ.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: don't issue stop when HW does it automatically

commit d89667b14f9d13b684287f6189ca209af5feee43 upstream.

The manual says (55.4.8.6) that HW does automatically send STOP after
NACK was received. My measuerments confirm that.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: init new messages in irq

commit cc21d0b4b62e41e5013d763adade5ea4462c33a4 upstream.

Setting up new messages was done in process context while handling a
message was in interrupt context. Because of the HW design, this IP core
is sensitive to timing, so the context switches were too expensive. Move
this setup to interrupt context as well.

In my test setup, this fixed the occasional 'data byte sent twice' issue
which a number of people have seen. It also fixes to send REP_START
after a read message which was wrongly send as a STOP + START sequence
before.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: refactor setup of a msg

commit b9d0684c79c4b9d30ce0d47d3270493dd0e76e59 upstream.

We want to reuse this function later.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: remove spinlock

commit ff2316b87a336bff940939cd9fc56287ed48e578 upstream.

After making sure to reinit the HW and clear interrupts in the timeout
case, we know that interrupts are always disabled in the sections
protected by the spinlock. Thus, we can simply remove it which is a
preparation for further refactoring. While here, rename the timeout
variable to time_left which is way more readable.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: remove unused IOERROR state

commit 90f779e565bdc18dd4f79d81cf11f43a7266010b upstream.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: rework hw init

commit 2c78cdc1c06308a59d6ed4145cdba73fdeff8c0d upstream.

We don't need to init HW before every transfer since we know the HW
state then. HW init at probe time is enough. While here, add setting the
clock register which belongs to init HW. Also, set MDBS bit since not
setting it is prohibited according to the manual.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: rcar: make sure clocks are on when doing clock calculation

commit e43e0df13f8528ca55ed79f469c4b2af897fa796 upstream.

When calculating the bus speed, the clock should be on, of course. Most
bootloaders left them on, so this went unnoticed so far.

Move the ioremapping out of this clock-enabled-block and prepare for
adding hw initialization there, too.

Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: avoid integer overflows in tcp_rcv_space_adjust()

commit 607065bad9931e72207b0cac365d7d4abc06bd99 upstream.

When using large tcp_rmem[2] values (I did tests with 500 MB),
I noticed overflows while computing rcvwin.

Lets fix this before the following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Backport: sysctl_tcp_rmem is not Namespace-ify'd in older kernels]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irda: fix overly long udelay()

commit c9bd28233b6d0d82ac3ba0215723be0a8262c39c upstream.

irda_get_mtt() returns a hardcoded '10000' in some cases,
and with gcc-7, we get a build error because this triggers a
compile-time check in udelay():

drivers/net/irda/w83977af_ir.o: In function `w83977af_hard_xmit':
w83977af_ir.c:(.text.w83977af_hard_xmit+0x14c): undefined reference to `__bad_udelay'

Older compilers did not run into this because they either did not
completely inline the irda_get_mtt() or did not consider the
10000 value a constant expression.

The code has been wrong since the start of git history.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>