OSDN Git Service
Bart Van Assche [Tue, 20 May 2014 13:08:34 +0000 (15:08 +0200)]
IB/srp: Add fast registration support
Certain HCA types (e.g. Connect-IB) and certain configurations (e.g.
ConnectX VF) support fast registration but not FMR. Hence add fast
registration support.
In function srp_rport_reconnect(), move the the srp_finish_req()
loop from after to before the srp_create_target_ib() call. This is
needed to avoid that srp_finish_req() tries to queue any
invalidation requests for rkeys associated with the old queue pair
on the newly allocated queue pair. Invoking srp_finish_req() before
the queue pair has been reallocated is safe since srp_claim_req()
handles completions correctly that arrive after srp_finish_req()
has been invoked.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Bart Van Assche [Tue, 20 May 2014 13:07:45 +0000 (15:07 +0200)]
IB/srp: Rename FMR-related variables
The next patch will cause the renamed variables to be shared between
the code for FMR and for FR memory registration. Make the names of
these variables independent of the memory registration mode. This
patch does not change any functionality. The start of this patch was
the changes applied via the following shell command:
sed -i.orig 's/SRP_FMR_SIZE/SRP_MAX_PAGES_PER_MR/g; \
s/fmr_page_mask/mr_page_mask/g;s/fmr_page_size/mr_page_size/g; \
s/fmr_page_shift/mr_page_shift/g;s/fmr_max_size/mr_max_size/g; \
s/max_pages_per_fmr/max_pages_per_mr/g;s/nfmr/nmdesc/g; \
s/fmr_len/dma_len/g' drivers/infiniband/ulp/srp/ib_srp.[ch]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Bart Van Assche [Tue, 20 May 2014 13:07:20 +0000 (15:07 +0200)]
IB/srp: One FMR pool per SRP connection
Allocate one FMR pool per SRP connection instead of one SRP pool
per HCA. This improves scalability of the SRP initiator.
Only request the SCSI mid-layer to retry a SCSI command after a
temporary mapping failure (-ENOMEM) but not after a permanent
mapping failure. This avoids that SCSI commands are retried
indefinitely if a permanent memory mapping failure occurs.
Tell the SCSI mid-layer to reduce queue depth temporarily in the
unlikely case where an application is queuing many requests with
more than max_pages_per_fmr sg-list elements.
For FMR pool allocation, base the max_pages_per_fmr parameter on
the HCA memory registration limit. Only try to allocate an FMR
pool if FMR is supported.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Bart Van Assche [Tue, 20 May 2014 13:06:41 +0000 (15:06 +0200)]
IB/srp: Introduce the 'register_always' kernel module parameter
Add a kernel module parameter that enables memory registration also for SG-lists
that can be processed without memory registration. This makes it easier for kernel
developers to test the memory registration code.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Bart Van Assche [Tue, 20 May 2014 13:05:46 +0000 (15:05 +0200)]
IB/srp: Introduce srp_finish_mapping()
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Bart Van Assche [Tue, 20 May 2014 13:05:21 +0000 (15:05 +0200)]
IB/srp: Introduce srp_map_fmr()
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Bart Van Assche [Tue, 20 May 2014 13:04:45 +0000 (15:04 +0200)]
IB/srp: Introduce an additional local variable
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Bart Van Assche [Tue, 20 May 2014 13:04:21 +0000 (15:04 +0200)]
IB/srp: Fix kernel-doc warnings
Avoid that the kernel-doc tool warns about missing argument
descriptions for the ib_srp.[ch] source files.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Bart Van Assche [Tue, 20 May 2014 13:03:49 +0000 (15:03 +0200)]
IB/srp: Fix a sporadic crash triggered by cable pulling
Avoid that the loops that iterate over the request ring can encounter
a pointer to a SCSI command in req->scmnd that is no longer associated
with that request. If the function srp_unmap_data() is invoked twice
for a SCSI command that is not in flight then that would cause
ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument,
resulting in a kernel oops.
Reported-by: Sagi Grimberg <sagig@mellanox.com>
Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Linus Torvalds [Fri, 9 May 2014 20:10:52 +0000 (13:10 -0700)]
Linux 3.15-rc5
Linus Torvalds [Fri, 9 May 2014 19:24:20 +0000 (12:24 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"A somewhat unpleasantly large collection of small fixes. The big ones
are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'. It
was using __init functions with predictably suboptimal results.
Another key fix is a build fix which would produce output that simply
would not decompress correctly in some configuration, due to the
existing Makefiles picking up an unfortunate local label and mistaking
it for the global symbol _end.
Additional fixes include the handling of 64-bit numbers when setting
the vdso data page (a latent bug which became manifest when i386
started exporting a vdso with time functions), a fix to the new MSR
manipulation accessors which would cause features to not get properly
unblocked, a build fix for 32-bit userland, and a few new platform
quirks"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro
x86: Fix typo preventing msr_set/clear_bit from having an effect
x86/intel: Add quirk to disable HPET for the Baytrail platform
x86/hpet: Make boot_hpet_disable extern
x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
x86/reboot: Add reboot quirk for Certec BPC600
asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
asmlinkage, x86: Add explicit __visible to arch/x86/*
asmlinkage: Revert "lto: Make asmlinkage __visible"
x86, build: Don't get confused by local symbols
x86/efi: earlyprintk=efi,keep fix
Boris Ostrovsky [Fri, 9 May 2014 15:11:27 +0000 (11:11 -0400)]
x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
With tk->wall_to_monotonic.tv_nsec being a 32-bit value on 32-bit
systems, (tk->wall_to_monotonic.tv_nsec << tk->shift) in update_vsyscall()
may lose upper bits or, worse, add them since compiler will do this:
(u64)(tk->wall_to_monotonic.tv_nsec << tk->shift)
instead of
((u64)tk->wall_to_monotonic.tv_nsec << tk->shift)
So if, for example, tv_nsec is 0x800000 and shift is 8 we will end up
with 0xffffffff80000000 instead of 0x80000000. And then we are stuck in
the subsequent 'while' loop.
We need an explicit cast.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1399648287-15178-1-git-send-email-boris.ostrovsky@oracle.com
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Andres Freund [Fri, 9 May 2014 01:29:17 +0000 (03:29 +0200)]
x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro
The spuriously added semicolon didn't have any effect because the
macro isn't currently in use.
c0a639ad0bc6b178b46996bd1f821a04643e2bde
Signed-off-by: Andres Freund <andres@anarazel.de>
Link: http://lkml.kernel.org/r/1399598957-7011-3-git-send-email-andres@anarazel.de
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Andres Freund [Fri, 9 May 2014 01:29:16 +0000 (03:29 +0200)]
x86: Fix typo preventing msr_set/clear_bit from having an effect
Due to a typo the msr accessor function introduced in
22085a66c2fab6cf9b9393c056a3600a6b4735de didn't have any lasting
effects because they accidentally wrote the old value back.
After
c0a639ad0bc6b178b46996bd1f821a04643e2bde this at the very least
this causes cpuid limits not to be lifted on some cpus leading to
missing capabilities for those.
Signed-off-by: Andres Freund <andres@anarazel.de>
Link: http://lkml.kernel.org/r/1399598957-7011-2-git-send-email-andres@anarazel.de
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Linus Torvalds [Fri, 9 May 2014 02:20:45 +0000 (19:20 -0700)]
Merge tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfs
Pull xfs fixes from Dave Chinner:
"The main fix is adding support for default ACLs on O_TMPFILE opened
inodes to bring XFS into line with other filesystems. Metadata CRCs
are now also considered well enough tested to be fully supported, so
we're removing the shouty warnings issued at mount time for
filesystems with that format. And there's transaction block
reservation overrun fix.
Summary:
- fix a remote attribute size calculation bug that leads to a
transaction overrun
- add default ACLs to O_TMPFILE files
- Remove the EXPERIMENTAL tag from filesystems with metadata CRC
support"
* tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfs:
xfs: remote attribute overwrite causes transaction overrun
xfs: initialize default acls for ->tmpfile()
xfs: fully support v5 format filesystems
Linus Torvalds [Thu, 8 May 2014 21:17:13 +0000 (14:17 -0700)]
Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains two fixes.
The first is a long standing bug that causes bogus data to show up in
the refcnt field of the module_refcnt tracepoint. It was introduced
by a merge conflict resolution back in 2.6.35-rc days.
The result should be 'refcnt = incs - decs', but instead it did
'refcnt = incs + decs'.
The second fix is to a bug that was introduced in this merge window
that allowed for a tracepoint funcs pointer to be used after it was
freed. Moving the location of where the probes are released solved
the problem"
* tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Fix use of tracepoint funcs after rcu free
trace: module: Maintain a valid user count
Linus Torvalds [Thu, 8 May 2014 21:06:45 +0000 (14:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"Just a few fixups to various drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elantech - fix touchpad initialization on Gigabyte U2442
Input: tca8418 - fix loading this driver as a module from a device tree
Input: bma150 - extend chip detection for bma180
Input: atkbd - fix keyboard not working on some LG laptops
Input: synaptics - add min/max quirk for ThinkPad Edge E431
Linus Torvalds [Thu, 8 May 2014 20:51:53 +0000 (13:51 -0700)]
Merge tag 'sound-3.15-rc5' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes for USB-audio and HD-audio, where most of them
are for regressions: USB-audio PM fixes, ratelimit annoyance fix, HDMI
offline state fix, and a couple of device-specific quirks"
* tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - hdmi: Set converter channel count even without sink
ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data
ALSA: usb-audio: Fix deadlocks at resuming
ALSA: usb-audio: Save mixer status only once at suspend
ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined
ALSA: hda - add headset mic detect quirk for a Dell laptop
Linus Torvalds [Thu, 8 May 2014 19:41:14 +0000 (12:41 -0700)]
Merge tag 'mfd-mmc-fixes-3.15-rc4' of git://git./linux/kernel/git/lee/mfd
Pull mmc/rtsx revert from Lee Jones.
* tag 'mfd-mmc-fixes-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"
Mathieu Desnoyers [Thu, 8 May 2014 11:47:49 +0000 (07:47 -0400)]
tracepoint: Fix use of tracepoint funcs after rcu free
Commit
de7b2973903c "tracepoint: Use struct pointer instead of name hash
for reg/unreg tracepoints" introduces a use after free by calling
release_probes on the old struct tracepoint array before the newly
allocated array is published with rcu_assign_pointer. There is a race
window where tracepoints (RCU readers) can perform a
"use-after-grace-period-after-free", which shows up as a GPF in
stress-tests.
Link: http://lkml.kernel.org/r/53698021.5020108@oracle.com
Link: http://lkml.kernel.org/p/1399549669-25465-1-git-send-email-mathieu.desnoyers@efficios.com
Reported-by: Sasha Levin <sasha.levin@oracle.com>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Dave Jones <davej@redhat.com>
Fixes:
de7b2973903c "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints"
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Romain Izard [Tue, 4 Mar 2014 09:09:39 +0000 (10:09 +0100)]
trace: module: Maintain a valid user count
The replacement of the 'count' variable by two variables 'incs' and
'decs' to resolve some race conditions during module unloading was done
in parallel with some cleanup in the trace subsystem, and was integrated
as a merge.
Unfortunately, the formula for this replacement was wrong in the tracing
code, and the refcount in the traces was not usable as a result.
Use 'count = incs - decs' to compute the user count.
Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.com
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org # 2.6.35
Fixes:
c1ab9cab7509 "merge conflict resolution"
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Micky Ching [Tue, 29 Apr 2014 01:54:54 +0000 (09:54 +0800)]
mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"
This reverts commit
c42deffd5b53c9e583d83c7964854ede2f12410d.
commit <mmc: rtsx: add support for pre_req and post_req> did use
mutex_unlock() in tasklet, but mutex_unlock() can't be used in
tasklet(atomic context). The driver needs to use mutex to avoid
concurrency, so we can't use tasklet here, the patch need to be
removed.
The spinlock host->lock and pcr->lock may deadlock, one way to solve
the deadlock is remove host->lock in sd_isr_done_transfer(), but if
using workqueue the we can avoid using the spinlock and also avoid
the problem.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Feng Tang [Thu, 24 Apr 2014 08:18:18 +0000 (16:18 +0800)]
x86/intel: Add quirk to disable HPET for the Baytrail platform
HPET on current Baytrail platform has accuracy problem to be
used as reliable clocksource/clockevent, so add a early quirk to
disable it.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1398327498-13163-2-git-send-email-feng.tang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Feng Tang [Thu, 24 Apr 2014 08:18:17 +0000 (16:18 +0800)]
x86/hpet: Make boot_hpet_disable extern
HPET on some platform has accuracy problem. Making
"boot_hpet_disable" extern so that we can runtime disable
the HPET timer by using quirk to check the platform.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1398327498-13163-1-git-send-email-feng.tang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Wed, 7 May 2014 23:28:52 +0000 (16:28 -0700)]
Merge tag 'for-linus-
20140507' of git://git.infradead.org/linux-mtd
Pull MTD fix from Brian Norris:
"A single update for Keystone SoC's, whose NAND controller does not
support subpage programming"
* tag 'for-linus-
20140507' of git://git.infradead.org/linux-mtd:
mtd: davinci-nand: disable subpage write for keystone-nand
Linus Torvalds [Wed, 7 May 2014 23:07:58 +0000 (16:07 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- fix a small bug in computation of report size, which might cause some
devices (Atmel touchpad found on the Samsung Ativ 9) to reject
reports with otherwise valid contents
- a few device-ID specific quirks/additions piggy-backing on top of it
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas
HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S
HID: core: fix computation of the report size
HID: multitouch: add support of EliteGroup 05D8 panels
Linus Torvalds [Wed, 7 May 2014 22:47:47 +0000 (15:47 -0700)]
Merge branch 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux
Pull radeon mullins support from Dave Airlie:
"This is support for the new AMD mullins APU, it pretty much just adds
support to the driver in the all the right places, and is pretty low
risk wrt other GPUs"
Oh well. I guess it ends up fitting under "support new hardware" for
merging late.
* 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: add pci ids for Mullins
drm/radeon: add Mullins VCE support
drm/radeon: modesetting updates for Mullins.
drm/radeon: dpm updates for KV/KB
drm/radeon: add Mullins dpm support.
drm/radeon: add Mullins UVD support.
drm/radeon: update cik init for Mullins.
drm/radeon: add Mullins chip family
Linus Torvalds [Wed, 7 May 2014 22:45:13 +0000 (15:45 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"radeon, i915 and nouveau fixes, all fixes for regressions or black
screens, or possible oopses"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: lower the ref * post PLL maximum
drm/radeon: check that we have a clock before PLL setup
drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path
drm/radeon: Fix num_banks calculation for SI
agp: info leak in agpioc_info_wrap()
drm/gm107/gr: bump attrib cb size quite a bit
drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
drm/nouveau/bios: fix shadowing from PROM on big-endian systems
drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
drm/radeon/dp: check for errors in dpcd reads
drm/radeon: avoid high jitter with small frac divs
drm/radeon: check buffer relocation offset
drm/radeon: use pflip irq on R600+ v2
drm/radeon/uvd: use lower clocks on old UVD to boot v2
drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
drm/i915: Sanitize the enable_ppgtt module option once
drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
George Spelvin [Wed, 7 May 2014 21:05:52 +0000 (17:05 -0400)]
x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
If you are using a 64-bit kernel with 32-bit userland, then
scripts/gcc-x86_64-has-stack-protector.sh invokes 32-bit gcc
with -mcmodel=kernel, which produces:
<stdin>:1:0: error: code model 'kernel' not supported in the 32 bit mode
and trips the "broken compiler" test at arch/x86/Makefile:120.
There are several places a fix is possible, but the following seems
cleanest. (But it's minimal; it would also be possible to factor
out a bunch of stuff from the two branches of the if.)
Signed-off-by: George Spelvin <linux@horizon.com>
Link: http://lkml.kernel.org/r/20140507210552.7581.qmail@ns.horizon.com
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Christian Gmeiner [Wed, 7 May 2014 07:01:54 +0000 (09:01 +0200)]
x86/reboot: Add reboot quirk for Certec BPC600
Certec BPC600 needs reboot=pci to actually reboot.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Li Aubrey <aubrey.li@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1399446114-2147-1-git-send-email-christian.gmeiner@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Tue, 6 May 2014 23:10:28 +0000 (09:10 +1000)]
Merge branch 'mullins' of git://people.freedesktop.org/~deathsimple/linux into drm-fixes
Add Mullins chips support.
* 'mullins' of git://people.freedesktop.org/~deathsimple/linux:
drm/radeon: add pci ids for Mullins
drm/radeon: add Mullins VCE support
drm/radeon: modesetting updates for Mullins.
drm/radeon: dpm updates for KV/KB
drm/radeon: add Mullins dpm support.
drm/radeon: add Mullins UVD support.
drm/radeon: update cik init for Mullins.
drm/radeon: add Mullins chip family
Dave Airlie [Tue, 6 May 2014 23:06:21 +0000 (09:06 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
nouveau fixes.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/gm107/gr: bump attrib cb size quite a bit
drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
drm/nouveau/bios: fix shadowing from PROM on big-endian systems
drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
Dave Airlie [Tue, 6 May 2014 22:56:03 +0000 (08:56 +1000)]
Merge tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Some more i915 fixes. There's still some DP issues we are looking into,
but wanted to get these moving.
* tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel:
drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
drm/i915: Sanitize the enable_ppgtt module option once
drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
Dave Airlie [Tue, 6 May 2014 22:55:27 +0000 (08:55 +1000)]
Merge branch 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux into drm-fixes
this is the next pull quested for stashed up radeon fixes for 3.15. As discussed support for Mullins was separated out and will get it's own pull request. Remaining highlights are:
1. Some more patches to better handle PLL limits.
2. Making use of the PFLIP additional to the VBLANK interrupt, otherwise we sometimes miss page flip events.
3. Fix for the UVD command stream parser.
4. Fix for bootup UVD clocks on RV7xx systems.
5. Adding missing error check on dpcd reads.
6. Fixes number of banks calculation on SI.
* 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux:
drm/radeon: lower the ref * post PLL maximum
drm/radeon: check that we have a clock before PLL setup
drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path
drm/radeon: Fix num_banks calculation for SI
drm/radeon/dp: check for errors in dpcd reads
drm/radeon: avoid high jitter with small frac divs
drm/radeon: check buffer relocation offset
drm/radeon: use pflip irq on R600+ v2
drm/radeon/uvd: use lower clocks on old UVD to boot v2
Linus Torvalds [Tue, 6 May 2014 20:07:41 +0000 (13:07 -0700)]
Merge branch 'akpm' (incoming from Andrew)
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
agp: info leak in agpioc_info_wrap()
fs/affs/super.c: bugfix / double free
fanotify: fix -EOVERFLOW with large files on 64-bit
slub: use sysfs'es release mechanism for kmem_cache
revert "mm: vmscan: do not swap anon pages just because free+file is low"
autofs: fix lockref lookup
mm: filemap: update find_get_pages_tag() to deal with shadow entries
mm/compaction: make isolate_freepages start at pageblock boundary
MAINTAINERS: zswap/zbud: change maintainer email address
mm/page-writeback.c: fix divide by zero in pos_ratio_polynom
hugetlb: ensure hugepage access is denied if hugepages are not supported
slub: fix memcg_propagate_slab_attrs
drivers/rtc/rtc-pcf8523.c: fix month definition
Dan Carpenter [Tue, 6 May 2014 19:50:12 +0000 (12:50 -0700)]
agp: info leak in agpioc_info_wrap()
On 64 bit systems the agp_info struct has a 4 byte hole between
->agp_mode and ->aper_base. We need to clear it to avoid disclosing
stack information to userspace.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fabian Frederick [Tue, 6 May 2014 19:50:11 +0000 (12:50 -0700)]
fs/affs/super.c: bugfix / double free
Commit
842a859db26b ("affs: use ->kill_sb() to simplify ->put_super()
and failure exits of ->mount()") adds .kill_sb which frees sbi but
doesn't remove sbi free in case of parse_options error causing double
free+random crash.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org> [3.14.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Woods [Tue, 6 May 2014 19:50:10 +0000 (12:50 -0700)]
fanotify: fix -EOVERFLOW with large files on 64-bit
On 64-bit systems, O_LARGEFILE is automatically added to flags inside
the open() syscall (also openat(), blkdev_open(), etc). Userspace
therefore defines O_LARGEFILE to be 0 - you can use it, but it's a
no-op. Everything should be O_LARGEFILE by default.
But: when fanotify does create_fd() it uses dentry_open(), which skips
all that. And userspace can't set O_LARGEFILE in fanotify_init()
because it's defined to 0. So if fanotify gets an event regarding a
large file, the read() will just fail with -EOVERFLOW.
This patch adds O_LARGEFILE to fanotify_init()'s event_f_flags on 64-bit
systems, using the same test as open()/openat()/etc.
Addresses https://bugzilla.redhat.com/show_bug.cgi?id=696821
Signed-off-by: Will Woods <wwoods@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Lameter [Tue, 6 May 2014 19:50:08 +0000 (12:50 -0700)]
slub: use sysfs'es release mechanism for kmem_cache
debugobjects warning during netfilter exit:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 4178 at lib/debugobjects.c:260 debug_print_object+0x8d/0xb0()
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20
Modules linked in:
CPU: 6 PID: 4178 Comm: kworker/u16:2 Tainted: G W 3.11.0-next-
20130906-sasha #3984
Workqueue: netns cleanup_net
Call Trace:
dump_stack+0x52/0x87
warn_slowpath_common+0x8c/0xc0
warn_slowpath_fmt+0x46/0x50
debug_print_object+0x8d/0xb0
__debug_check_no_obj_freed+0xa5/0x220
debug_check_no_obj_freed+0x15/0x20
kmem_cache_free+0x197/0x340
kmem_cache_destroy+0x86/0xe0
nf_conntrack_cleanup_net_list+0x131/0x170
nf_conntrack_pernet_exit+0x5d/0x70
ops_exit_list+0x5e/0x70
cleanup_net+0xfb/0x1c0
process_one_work+0x338/0x550
worker_thread+0x215/0x350
kthread+0xe7/0xf0
ret_from_fork+0x7c/0xb0
Also during dcookie cleanup:
WARNING: CPU: 12 PID: 9725 at lib/debugobjects.c:260 debug_print_object+0x8c/0xb0()
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20
Modules linked in:
CPU: 12 PID: 9725 Comm: trinity-c141 Not tainted
3.15.0-rc2-next-20140423-sasha-00018-gc4ff6c4 #408
Call Trace:
dump_stack (lib/dump_stack.c:52)
warn_slowpath_common (kernel/panic.c:430)
warn_slowpath_fmt (kernel/panic.c:445)
debug_print_object (lib/debugobjects.c:262)
__debug_check_no_obj_freed (lib/debugobjects.c:697)
debug_check_no_obj_freed (lib/debugobjects.c:726)
kmem_cache_free (mm/slub.c:2689 mm/slub.c:2717)
kmem_cache_destroy (mm/slab_common.c:363)
dcookie_unregister (fs/dcookies.c:302 fs/dcookies.c:343)
event_buffer_release (arch/x86/oprofile/../../../drivers/oprofile/event_buffer.c:153)
__fput (fs/file_table.c:217)
____fput (fs/file_table.c:253)
task_work_run (kernel/task_work.c:125 (discriminator 1))
do_notify_resume (include/linux/tracehook.h:196 arch/x86/kernel/signal.c:751)
int_signal (arch/x86/kernel/entry_64.S:807)
Sysfs has a release mechanism. Use that to release the kmem_cache
structure if CONFIG_SYSFS is enabled.
Only slub is changed - slab currently only supports /proc/slabinfo and
not /sys/kernel/slab/*. We talked about adding that and someone was
working on it.
[akpm@linux-foundation.org: fix CONFIG_SYSFS=n build]
[akpm@linux-foundation.org: fix CONFIG_SYSFS=n build even more]
Signed-off-by: Christoph Lameter <cl@linux.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Greg KH <greg@kroah.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Tue, 6 May 2014 19:50:07 +0000 (12:50 -0700)]
revert "mm: vmscan: do not swap anon pages just because free+file is low"
This reverts commit
0bf1457f0cfc ("mm: vmscan: do not swap anon pages
just because free+file is low") because it introduced a regression in
mostly-anonymous workloads, where reclaim would become ineffective and
trap every allocating task in direct reclaim.
The problem is that there is a runaway feedback loop in the scan balance
between file and anon, where the balance tips heavily towards a tiny
thrashing file LRU and anonymous pages are no longer being looked at.
The commit in question removed the safe guard that would detect such
situations and respond with forced anonymous reclaim.
This commit was part of a series to fix premature swapping in loads with
relatively little cache, and while it made a small difference, the cure
is obviously worse than the disease. Revert it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent [Tue, 6 May 2014 19:50:06 +0000 (12:50 -0700)]
autofs: fix lockref lookup
autofs needs to be able to see private data dentry flags for its dentrys
that are being created but not yet hashed and for its dentrys that have
been rmdir()ed but not yet freed. It needs to do this so it can block
processes in these states until a status has been returned to indicate
the given operation is complete.
It does this by keeping two lists, active and expring, of dentrys in
this state and uses ->d_release() to keep them stable while it checks
the reference count to determine if they should be used.
But with the recent lockref changes dentrys being freed sometimes don't
transition to a reference count of 0 before being freed so autofs can
occassionally use a dentry that is invalid which can lead to a panic.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Tue, 6 May 2014 19:50:05 +0000 (12:50 -0700)]
mm: filemap: update find_get_pages_tag() to deal with shadow entries
Dave Jones reports the following crash when find_get_pages_tag() runs
into an exceptional entry:
kernel BUG at mm/filemap.c:1347!
RIP: find_get_pages_tag+0x1cb/0x220
Call Trace:
find_get_pages_tag+0x36/0x220
pagevec_lookup_tag+0x21/0x30
filemap_fdatawait_range+0xbe/0x1e0
filemap_fdatawait+0x27/0x30
sync_inodes_sb+0x204/0x2a0
sync_inodes_one_sb+0x19/0x20
iterate_supers+0xb2/0x110
sys_sync+0x44/0xb0
ia32_do_call+0x13/0x13
1343 /*
1344 * This function is never used on a shmem/tmpfs
1345 * mapping, so a swap entry won't be found here.
1346 */
1347 BUG();
After commit
0cd6144aadd2 ("mm + fs: prepare for non-page entries in
page cache radix trees") this comment and BUG() are out of date because
exceptional entries can now appear in all mappings - as shadows of
recently evicted pages.
However, as Hugh Dickins notes,
"it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably
any other PAGECACHE_TAG_*) to appear on an exceptional entry.
I expect it comes down to an occasional race in RCU lookup of the
radix_tree: lacking absolute synchronization, we might sometimes
catch an exceptional entry, with the tag which really belongs with
the unexceptional entry which was there an instant before."
And indeed, not only is the tree walk lockless, the tags are also read
in chunks, one radix tree node at a time. There is plenty of time for
page reclaim to swoop in and replace a page that was already looked up
as tagged with a shadow entry.
Remove the BUG() and update the comment. While reviewing all other
lookup sites for whether they properly deal with shadow entries of
evicted pages, update all the comments and fix memcg file charge moving
to not miss shmem/tmpfs swapcache pages.
Fixes:
0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 6 May 2014 19:50:03 +0000 (12:50 -0700)]
mm/compaction: make isolate_freepages start at pageblock boundary
The compaction freepage scanner implementation in isolate_freepages()
starts by taking the current cc->free_pfn value as the first pfn. In a
for loop, it scans from this first pfn to the end of the pageblock, and
then subtracts pageblock_nr_pages from the first pfn to obtain the first
pfn for the next for loop iteration.
This means that when cc->free_pfn starts at offset X rather than being
aligned on pageblock boundary, the scanner will start at offset X in all
scanned pageblock, ignoring potentially many free pages. Currently this
can happen when
a) zone's end pfn is not pageblock aligned, or
b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE
enabled and a hole spanning the beginning of a pageblock
This patch fixes the problem by aligning the initial pfn in
isolate_freepages() to pageblock boundary. This also permits replacing
the end-of-pageblock alignment within the for loop with a simple
pageblock_nr_pages increment.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Heesub Shin <heesub.shin@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Seth Jennings [Tue, 6 May 2014 19:50:02 +0000 (12:50 -0700)]
MAINTAINERS: zswap/zbud: change maintainer email address
sjenning@linux.vnet.ibm.com is no longer a viable entity.
Signed-off-by: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rik van Riel [Tue, 6 May 2014 19:50:01 +0000 (12:50 -0700)]
mm/page-writeback.c: fix divide by zero in pos_ratio_polynom
It is possible for "limit - setpoint + 1" to equal zero, after getting
truncated to a 32 bit variable, and resulting in a divide by zero error.
Using the fully 64 bit divide functions avoids this problem. It also
will cause pos_ratio_polynom() to return the correct value when
(setpoint - limit) exceeds 2^32.
Also uninline pos_ratio_polynom, at Andrew's request.
Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nishanth Aravamudan [Tue, 6 May 2014 19:50:00 +0000 (12:50 -0700)]
hugetlb: ensure hugepage access is denied if hugepages are not supported
Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`. I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:
Unable to handle kernel paging request for data at address 0x00000031
Faulting instruction address: 0xc000000000245710
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
....
In KVM guests on Power, in a guest not backed by hugepages, we see the
following:
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 64 kB
HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init(). Extract the check to a helper function, and use it in a
few relevant places.
This does make hugetlbfs not supported (not registered at all) in this
environment. I believe this is fine, as there are no valid hugepages
and that won't change at runtime.
[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Tue, 6 May 2014 19:49:59 +0000 (12:49 -0700)]
slub: fix memcg_propagate_slab_attrs
After creating a cache for a memcg we should initialize its sysfs attrs
with the values from its parent. That's what memcg_propagate_slab_attrs
is for. Currently it's broken - we clearly muddled root-vs-memcg caches
there. Let's fix it up.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Cui [Tue, 6 May 2014 19:49:58 +0000 (12:49 -0700)]
drivers/rtc/rtc-pcf8523.c: fix month definition
PCF8523 uses 1-12 to represent month according to datasheet.
link: www.nxp.com/documents/data_sheet/PCF8523.pdf.
Signed-off-by: Chris Cui <chris.wei.cui@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 6 May 2014 19:22:20 +0000 (12:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"dcache fixes + kvfree() (uninlined, exported by mm/util.c) + posix_acl
bugfix from hch"
The dcache fixes are for a subtle LRU list corruption bug reported by
Miklos Szeredi, where people inside IBM saw list corruptions with the
LTP/host01 test.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nick kvfree() from apparmor
posix_acl: handle NULL ACL in posix_acl_equiv_mode
dcache: don't need rcu in shrink_dentry_list()
more graceful recovery in umount_collect()
don't remove from shrink list in select_collect()
dentry_kill(): don't try to remove from shrink list
expand the call of dentry_lru_del() in dentry_kill()
new helper: dentry_free()
fold try_prune_one_dentry()
fold d_kill() and d_free()
fix races between __d_instantiate() and checks of dentry flags
Al Viro [Tue, 6 May 2014 18:02:53 +0000 (14:02 -0400)]
nick kvfree() from apparmor
too many places open-code it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Christoph Hellwig [Sun, 4 May 2014 11:03:32 +0000 (13:03 +0200)]
posix_acl: handle NULL ACL in posix_acl_equiv_mode
Various filesystems don't bother checking for a NULL ACL in
posix_acl_equiv_mode, and thus can dereference a NULL pointer when it
gets passed one. This usually happens from the NFS server, as the ACL tools
never pass a NULL ACL, but instead of one representing the mode bits.
Instead of adding boilerplat to all filesystems put this check into one place,
which will allow us to remove the check from other filesystems as well later
on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ben Greear <greearb@candelatech.com>
Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de>,
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Tue, 6 May 2014 16:09:35 +0000 (09:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"This adds ctime update in the new cached writeback mode and also
fixes/simplifies the mtime update handling. Support for rename flags
(aka renameat2) is also added to the userspace API"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add renameat2 support
fuse: clear MS_I_VERSION
fuse: clear FUSE_I_CTIME_DIRTY flag on setattr
fuse: trust kernel i_ctime only
fuse: remove .update_time
fuse: allow ctime flushing to userspace
fuse: fuse: add time_gran to INIT_OUT
fuse: add .write_inode
fuse: clean up fsync
fuse: fuse: fallocate: use file_update_time()
fuse: update mtime on open(O_TRUNC) in atomic_o_trunc mode
fuse: update mtime on truncate(2)
fuse: do not use uninitialized i_mode
fuse: fix mtime update error in fsync
fuse: check fallocate mode
fuse: add __exit to fuse_ctl_cleanup
Linus Torvalds [Tue, 6 May 2014 16:08:03 +0000 (09:08 -0700)]
Merge git://git./linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
"I've been auditing the THP support on sparc64 and found several bugs,
hopefully most of which are fixed completely here.
Also an RT kernel locking fix from Kirill Tkhai"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Give more detailed information in {pgd,pmd}_ERROR() and kill pte_ERROR().
sparc64: Add basic validations to {pud,pmd}_bad().
sparc64: Use 'ILOG2_4MB' instead of constant '22'.
sparc64: Fix range check in kern_addr_valid().
sparc64: Fix top-level fault handling bugs.
sparc64: Handle 32-bit tasks properly in compute_effective_address().
sparc64: Don't use _PAGE_PRESENT in pte_modify() mask.
sparc64: Fix hex values in comment above pte_modify().
sparc64: Fix bugs in get_user_pages_fast() wrt. THP.
sparc64: Fix huge PMD invalidation.
sparc64: Fix executable bit testing in set_pmd_at() paths.
sparc64: Normalize NMI watchdog logging and behavior.
sparc64: Make itc_sync_lock raw
sparc64: Fix argument sign extension for compat_sys_futex().
Samuel Li [Wed, 30 Apr 2014 22:40:55 +0000 (18:40 -0400)]
drm/radeon: add pci ids for Mullins
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Leo Liu [Wed, 30 Apr 2014 22:40:54 +0000 (18:40 -0400)]
drm/radeon: add Mullins VCE support
VCE 2.0 just like the other CIK parts.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Samuel Li [Wed, 30 Apr 2014 22:40:53 +0000 (18:40 -0400)]
drm/radeon: modesetting updates for Mullins.
Uses the same code as Kabini.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Alex Deucher [Wed, 30 Apr 2014 22:40:52 +0000 (18:40 -0400)]
drm/radeon: dpm updates for KV/KB
- Use vddc/sclk dep table for voltage if available
- Fix UVD DPM setup
- Patch voltage tables properly for non-UVD blocks
- Fix DPM + UVD/VCE on Mullins
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Samuel Li [Wed, 30 Apr 2014 22:40:51 +0000 (18:40 -0400)]
drm/radeon: add Mullins dpm support.
Generic dpm support similar to Kabini. Mullins specific features
will be worked on later.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Samuel Li [Wed, 30 Apr 2014 22:40:50 +0000 (18:40 -0400)]
drm/radeon: add Mullins UVD support.
Has same version of UVD as other CIK parts.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Samuel Li [Wed, 30 Apr 2014 22:40:49 +0000 (18:40 -0400)]
drm/radeon: update cik init for Mullins.
Also add golden registers, update firmware loading functions.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Samuel Li [Wed, 30 Apr 2014 22:40:48 +0000 (18:40 -0400)]
drm/radeon: add Mullins chip family
Mullins is a new CI-based APU.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Christian König [Thu, 1 May 2014 17:00:41 +0000 (19:00 +0200)]
drm/radeon: lower the ref * post PLL maximum
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75241
Signed-off-by: Christian König <christian.koenig@amd.com>
Christian König [Fri, 2 May 2014 12:27:42 +0000 (14:27 +0200)]
drm/radeon: check that we have a clock before PLL setup
Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75211
Signed-off-by: Christian König <christian.koenig@amd.com>
Maarten Lankhorst [Thu, 24 Apr 2014 11:29:14 +0000 (13:29 +0200)]
drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path
It would appear this bug has been copy/pasted many times without being noticed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Tue, 22 Apr 2014 07:53:52 +0000 (16:53 +0900)]
drm/radeon: Fix num_banks calculation for SI
The way the tile mode array index was calculated only makes sense for
the CIK specific macrotile mode array. For SI, we need to use one of the
tile mode array indices reserved for displayable surfaces.
This happened to result in correct display most if not all of the time
because most of the SI tiling modes use the same number of banks.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
David Miller [Mon, 5 May 2014 20:20:04 +0000 (16:20 -0400)]
slab: Fix off by one in object max number tests.
If freelist_idx_t is a byte, SLAB_OBJ_MAX_NUM should be 255 not 256, and
likewise if freelist_idx_t is a short, then it should be 65535 not
65536.
This was leading to all kinds of random crashes on sparc64 where
PAGE_SIZE is 8192. One problem shown was that if spinlock debugging was
enabled, we'd get deadlocks in copy_pte_range() or do_wp_page() with the
same cpu already holding a lock it shouldn't hold, or the lock belonging
to a completely unrelated process.
Fixes:
a41adfaa23df ("slab: introduce byte sized index for the freelist of a slab")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 18 Apr 2014 07:24:09 +0000 (16:24 +0900)]
slab: fix the type of the index on freelist index accessor
Commit
a41adfaa23df ("slab: introduce byte sized index for the freelist
of a slab") changes the size of freelist index and also changes
prototype of accessor function to freelist index. And there was a
mistake.
The mistake is that although it changes the size of freelist index
correctly, it changes the size of the index of freelist index
incorrectly. With patch, freelist index can be 1 byte or 2 bytes, that
means that num of object on on a slab can be more than 255. So we need
more than 1 byte for the index to find the index of free object on
freelist. But, above patch makes this index type 1 byte, so slab which
have more than 255 objects cannot work properly and in consequence of
it, the system cannot boot.
This issue was reported by Steven King on m68knommu which would use
2 bytes freelist index:
https://lkml.org/lkml/2014/4/16/433
To fix is easy. To change the type of the index of freelist index on
accessor functions is enough to fix this bug. Although 2 bytes is
enough, I use 4 bytes since it have no bad effect and make things more
easier. This fix was suggested and tested by Steven in his original
report.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-and-acked-by: Steven King <sfking@fdwdc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Tested-by: David Miller <davem@davemloft.net>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andi Kleen [Thu, 1 May 2014 22:44:38 +0000 (00:44 +0200)]
asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
As requested by Linus add explicit __visible to the asmlinkage users.
This marks functions visible to assembler.
Tree sweep for rest of tree.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-4-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Andi Kleen [Thu, 1 May 2014 22:44:37 +0000 (00:44 +0200)]
asmlinkage, x86: Add explicit __visible to arch/x86/*
As requested by Linus add explicit __visible to the asmlinkage users.
This marks all functions visible to assembler.
Tree sweep for arch/x86/*
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Andi Kleen [Thu, 1 May 2014 22:44:36 +0000 (00:44 +0200)]
asmlinkage: Revert "lto: Make asmlinkage __visible"
As requested by Linus, revert adding __visible to asmlinkage.
Instead we add __visible explicitely to all the symbols
that need it.
This reverts commit
128ea04a9885af9629059e631ddf0cab4815b589.
Link: http://lkml.kernel.org/r/1398984278-29319-2-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Peter F. Patel-Schneider [Mon, 5 May 2014 22:55:32 +0000 (15:55 -0700)]
HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas
The sensor hub in Lenovo Yogas needs the enumeration quirk. I've been running
the patch for over a month with no problems, whereas the unpatched drivers
reliably mis-initialized the sensors.
Signed-off-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Mon, 5 May 2014 22:59:46 +0000 (15:59 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) e1000e computes header length incorrectly wrt vlans, fix from Vlad
Yasevich.
2) ns_capable() check in sock_diag netlink code, from Andrew
Lutomirski.
3) Fix invalid queue pairs handling in virtio_net, from Amos Kong.
4) Checksum offloading busted in sxgbe driver due to incorrect
descriptor layout, fix from Byungho An.
5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen
Lim.
6) Fix uninitialized A and X registers in BPF interpreter, from Alexei
Starovoitov.
7) Fix arch dependencies of candence driver.
8) Fix netlink capabilities checking tree-wide, from Eric W Biederman.
9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in
IFLA_EXT_MASK, from David Gibson.
10) IPV6 FIB dump restart doesn't handle table changes that happen
meanwhile, causing the code to loop forever or emit dups, fix from
Kumar Sandararajan.
11) Memory leak on VF removal in bnx2x, from Yuval Mintz.
12) Bug fixes for new Altera TSE driver from Vince Bridgers.
13) Fix route lookup key in SCTP, from Xugeng Zhang.
14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN
driver. From Oliver Hartkopp.
15) TCP doesn't bump retransmit counters in some code paths, fix from
Eric Dumazet.
16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by
zero. Fix from Liu Yu.
17) Fix locking imbalance in error paths of HHF packet scheduler, from
John Fastabend.
18) Properly reference the transport module when vsock_core_init() runs,
from Andy King.
19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork.
20) IP_ECN_decapsulate() doesn't see a correct SKB network header in
ip_tunnel_rcv(), fix from Ying Cai.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
net: macb: Fix race between HW and driver
net: macb: Remove 'unlikely' optimization
net: macb: Re-enable RX interrupt only when RX is done
net: macb: Clear interrupt flags
net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP
ip_tunnel: Set network header properly for IP_ECN_decapsulate()
e1000e: Restrict MDIO Slow Mode workaround to relevant parts
e1000e: Fix issue with link flap on 82579
e1000e: Expand workaround for 10Mb HD throughput bug
e1000e: Workaround for dropped packets in Gig/100 speeds on 82579
net/mlx4_core: Don't issue PCIe speed/width checks for VFs
net/mlx4_core: Load the Eth driver first
net/mlx4_core: Fix slave id computation for single port VF
net/mlx4_core: Adjust port number in qp_attach wrapper when detaching
net: cdc_ncm: fix buffer overflow
Altera TSE: ALTERA_TSE should depend on HAS_DMA
vsock: Make transport the proto owner
net: sched: lock imbalance in hhf qdisc
net: mvmdio: Check for a valid interrupt instead of an error
net phy: Check for aneg completion before setting state to PHY_RUNNING
...
Linus Torvalds [Mon, 5 May 2014 22:51:17 +0000 (15:51 -0700)]
Merge tag 'usb-3.15-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes and device ids for 3.15-rc4.
All have been in linux-next just fine"
* tag 'usb-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Nokia 5300 should be treated as unusual dev
USB: Nokia 305 should be treated as unusual dev
fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6
usb: storage: shuttle_usbat: fix discs being detected twice
usb: qcserial: add a number of Dell devices
USB: OHCI: fix problem with global suspend on ATI controllers
usb: gadget: at91-udc: fix irq and iomem resource retrieval
usb: phy: fsm: change "|" to "||" for condition OTG_STATE_A_WAIT_BCON at statemachine
usb: phy: fsm: update OTG HNP state transition
Linus Torvalds [Mon, 5 May 2014 22:50:16 +0000 (15:50 -0700)]
Merge tag 'tty-3.15-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for things reported
recently"
* tag 'tty-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix lockless tty buffer race
Revert "tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc"
drivers/tty/hvc: don't free hvc_console_setup after init
n_tty: Fix n_tty_write crash when echoing in raw mode
tty: serial: 8250_core.c Bug fix for Exar chips.
Linus Torvalds [Mon, 5 May 2014 22:49:38 +0000 (15:49 -0700)]
Merge tag 'staging-3.15-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging / iio fixes from Greg KH:
"Here are some small IIO driver fixes for 3.15-rc4 that resolve some
reported issues"
* tag 'staging-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: Nothing in ADC should be a bool CONFIG
iio: exynos_adc: use indio_dev->dev structure to handle child nodes
iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereference
staging:iio:ad2s1200 fix missing parenthesis in a for statment.
Linus Torvalds [Mon, 5 May 2014 22:36:59 +0000 (15:36 -0700)]
Merge tag 'xtensa-next-
20140503' of git://github.com/czankel/xtensa-linux
Pull Xtensa fixes from Chris Zankel:
- Fixes allmodconfig, allnoconfig builds
- Adds highmem support
- Enables build-time exception table sorting.
* tag 'xtensa-next-
20140503' of git://github.com/czankel/xtensa-linux:
xtensa: ISS: don't depend on CONFIG_TTY
xtensa: xt2000: drop redundant sysmem initialization
xtensa: add support for KC705
xtensa: xtfpga: introduce SoC I/O bus
xtensa: add HIGHMEM support
xtensa: optimize local_flush_tlb_kernel_range
xtensa: dump sysmem from the bootmem_init
xtensa: handle memmap kernel option
xtensa: keep sysmem banks ordered in mem_reserve
xtensa: keep sysmem banks ordered in add_sysmem_bank
xtensa: split bootparam and kernel meminfo
xtensa: enable sorting extable at build time
xtensa: export __{invalidate,flush}_dcache_range
xtensa: Export __invalidate_icache_range
H. Peter Anvin [Mon, 5 May 2014 22:23:35 +0000 (15:23 -0700)]
x86, build: Don't get confused by local symbols
arch/x86/crypto/sha1_avx2_x86_64_asm.S introduced _end as a local
symbol, which broke the build under certain circumstances. Although
the wisdom of _end as a local symbol can definitely be questioned, the
build should not break for that reason.
Thus, filter the output of nm to only get global symbols of
appropriate type.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-uxm3j3w3odglcwhafwq5tjqu@git.kernel.org
Linus Torvalds [Mon, 5 May 2014 22:17:02 +0000 (15:17 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull Ceph fixes from Sage Weil:
"First, there is a critical fix for the new primary-affinity function
that went into -rc1.
The second batch of patches from Zheng fix a range of problems with
directory fragmentation, readdir, and a few odds and ends for cephfs"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: reserve caps for file layout/lock MDS requests
ceph: avoid releasing caps that are being used
ceph: clear directory's completeness when creating file
libceph: fix non-default values check in apply_primary_affinity()
ceph: use fpos_cmp() to compare dentry positions
ceph: check directory's completeness before emitting directory entry
Dave Chinner [Mon, 5 May 2014 21:37:31 +0000 (07:37 +1000)]
xfs: remote attribute overwrite causes transaction overrun
Commit
e461fcb ("xfs: remote attribute lookups require the value
length") passes the remote attribute length in the xfs_da_args
structure on lookup so that CRC calculations and validity checking
can be performed correctly by related code. This, unfortunately has
the side effect of changing the args->valuelen parameter in cases
where it shouldn't.
That is, when we replace a remote attribute, the incoming
replacement stores the value and length in args->value and
args->valuelen, but then the lookup which finds the existing remote
attribute overwrites args->valuelen with the length of the remote
attribute being replaced. Hence when we go to create the new
attribute, we create it of the size of the existing remote
attribute, not the size it is supposed to be. When the new attribute
is much smaller than the old attribute, this results in a
transaction overrun and an ASSERT() failure on a debug kernel:
XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331
Fix this by keeping the remote attribute value length separate to
the attribute value length in the xfs_da_args structure. The enables
us to pass the length of the remote attribute to be removed without
overwriting the new attribute's length.
Also, ensure that when we save remote block contexts for a later
rename we zero the original state variables so that we don't confuse
the state of the attribute to be removes with the state of the new
attribute that we just added. [Spotted by Brain Foster.]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Brian Foster [Mon, 5 May 2014 21:34:28 +0000 (07:34 +1000)]
xfs: initialize default acls for ->tmpfile()
The current tmpfile handler does not initialize default ACLs. Doing so
within xfs_vn_tmpfile() makes it roughly equivalent to xfs_vn_mknod(),
which is already used as a common create handler.
xfs_vn_mknod() does not currently have a mechanism to determine whether
to link the file into the namespace. Therefore, further abstract
xfs_vn_mknod() into a new xfs_generic_create() handler with a tmpfile
parameter. This new handler calls xfs_create_tmpfile() and d_tmpfile()
on the dentry when called via ->tmpfile().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Soren Brinkmann [Sun, 4 May 2014 22:43:02 +0000 (15:43 -0700)]
net: macb: Fix race between HW and driver
Under "heavy" RX load, the driver cannot handle the descriptors fast
enough. In detail, when a descriptor is consumed, its used flag is
cleared and once the RX budget is consumed all descriptors with a
cleared used flag are prepared to receive more data. Under load though,
the HW may constantly receive more data and use those descriptors with a
cleared used flag before they are actually prepared for next usage.
The head and tail pointers into the RX-ring should always be valid and
we can omit clearing and checking of the used flag.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soren Brinkmann [Sun, 4 May 2014 22:43:01 +0000 (15:43 -0700)]
net: macb: Remove 'unlikely' optimization
Coverage data suggests that the unlikely case of receiving data while
the receive handler is running may not be that unlikely.
Coverage data after running iperf for a while:
91320: 891: work_done = bp->macbgem_ops.mog_rx(bp, budget);
91320: 892: if (work_done < budget) {
2362: 893: napi_complete(napi);
-: 894:
-: 895: /* Packets received while interrupts were disabled */
4724: 896: status = macb_readl(bp, RSR);
2362: 897: if (unlikely(status)) {
762: 898: if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
762: 899: macb_writel(bp, ISR, MACB_BIT(RCOMP));
-: 900: napi_reschedule(napi);
-: 901: } else {
1600: 902: macb_writel(bp, IER, MACB_RX_INT_FLAGS);
-: 903: }
-: 904: }
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soren Brinkmann [Sun, 4 May 2014 22:43:00 +0000 (15:43 -0700)]
net: macb: Re-enable RX interrupt only when RX is done
When data is received during the driver processing received data the
NAPI is re-scheduled. In that case the RX interrupt should not be
re-enabled.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soren Brinkmann [Sun, 4 May 2014 22:42:59 +0000 (15:42 -0700)]
net: macb: Clear interrupt flags
A few interrupt flags were not cleared in the ISR, resulting in a sytem
trapped in the ISR in cases one of those interrupts occurred. Clear all
flags to avoid such situations.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soren Brinkmann [Sun, 4 May 2014 22:42:58 +0000 (15:42 -0700)]
net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP
Just as commit "net: macb: DMA-unmap full rx-buffer"
(
48330e08fa168395b9fd9f369f06cca1df204361), pass the size that
was used for mapping the memory also to the unmap routine to
avoid warnings from the DMA_API.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Cai [Sun, 4 May 2014 22:20:04 +0000 (15:20 -0700)]
ip_tunnel: Set network header properly for IP_ECN_decapsulate()
In ip_tunnel_rcv(), set skb->network_header to inner IP header
before IP_ECN_decapsulate().
Without the fix, IP_ECN_decapsulate() takes outer IP header as
inner IP header, possibly causing error messages or packet drops.
Note that this skb_reset_network_header() call was in this spot when
the original feature for checking consistency of ECN bits through
tunnels was added in
eccc1bb8d4b4 ("tunnel: drop packet if ECN present
with not-ECT"). It was only removed from this spot in
3d7b46cd20e3
("ip_tunnel: push generic protocol handling to ip_tunnel module.").
Fixes:
3d7b46cd20e3 ("ip_tunnel: push generic protocol handling to ip_tunnel module.")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Ying Cai <ycai@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 5 May 2014 20:30:03 +0000 (16:30 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates
This series contains updates to e1000e only.
David provides four fixes for e1000e, first is a workaround for a hardware
erratum on 82579 devices which experienced packet loss in gigabit and 100
speeds when interconnect between the PHY and MAC is exiting K1 power saving
state. Second expands the scope of a workaround to include i217 and i218
parts as well to address over aggressive transmit behavior when connecting
at 10Mbs half-duplex. Next is to resolve a reported link flap issue on
82579 parts which was root caused as an interoperability problem between
82579 and at least some Broadcom PHYs in the Energy Efficient Ethernet wake
mechanism. Lastly, restricts the workaround of putting the PHY into MDIO
slow mode to access the PHY id to relevant parts since this issue has been
fixed on the newer hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ertman [Thu, 1 May 2014 02:19:03 +0000 (02:19 +0000)]
e1000e: Restrict MDIO Slow Mode workaround to relevant parts
It has been determined that the workaround of putting the PHY into MDIO
slow mode to access the PHY id is not necessary with Lynx Point and newer
parts. The issue that necessitated the workaround has been fixed on the
newer hardware.
We will maintains, as a last ditch attempt, the conversion to MDIO Slow
Mode in the failure branch when attempting to access the PHY id so as to
cover all contingencies.
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David Ertman [Thu, 1 May 2014 01:22:26 +0000 (01:22 +0000)]
e1000e: Fix issue with link flap on 82579
Several customers have reported a link flap issue on 82579. The symptoms
are random and intermittent link losses when 82579 is connected to specific
link partners. Issue has been root caused as interoperability problem
between 82579 and at least some Broadcom PHYs in the Energy Efficient
Ethernet wake mechanism.
To fix the issue, we are disabling the Phase Locked Loop shutdown in 100M
Low Power Idle. This solution will cause an increase of power in 100M EEE
link. It will cost additional 28mW in this specific mode.
Cc: Lukasz Adamczuk <lukasz.adamczuk@intel.com>
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David Ertman [Tue, 22 Apr 2014 05:48:54 +0000 (05:48 +0000)]
e1000e: Expand workaround for 10Mb HD throughput bug
In commit
772d05c51c4f4896c120ad418b1e91144a2ac813 "e1000e: slow performance
between two 82579 connected via 10Mbit hub", a workaround was put into place
to address the overaggressive transmit behavior of 82579 parts when connecting
at 10Mbs half-duplex.
This same behavior is seen on i217 and i218 parts as well. This patch expands
the original workaround to encompass these parts.
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David Ertman [Tue, 22 Apr 2014 05:25:53 +0000 (05:25 +0000)]
e1000e: Workaround for dropped packets in Gig/100 speeds on 82579
This is a workaround for a HW erratum on 82579 devices.
Erratum is #23 in Intel 6 Series Chipset and Intel C200 Series Chipset
specification Update June 2013.
Problem: 82579 parts experience packet loss in Gig and 100 speeds
when interconnect between PHY and MAC is exiting K1 power saving state.
This was previously believed to only affect 1Gig speed, but has been observed
at 100Mbs also.
Workaround: Disable K1 for 82579 devices at Gig and 100 speeds.
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Mon, 5 May 2014 19:49:29 +0000 (15:49 -0400)]
Merge branch 'mlx4'
Or Gerlitz says:
====================
This series contains fixes for 3.15-rc, mostly around SRIOV. The patches by Jack,
Matan and myself fix few issues related to mlx4 SRIOV support for RoCE and single
port VFs, and the patch from Eyal eliminates checking PCI caps for VFs which is misleading.
Patches done against the net tree, commit
014f1b2 "net: bonding: Fix format string
mismatch in bond_sysfs.c"
We'd be happy to get Eyal's patch queued in your -stable list for 3.14.y
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eyal Perry [Sun, 4 May 2014 14:07:25 +0000 (17:07 +0300)]
net/mlx4_core: Don't issue PCIe speed/width checks for VFs
Carrying out PCI speed/width checks through pcie_get_minimum_link()
on VFs yield wrong results, so remove them.
Fixes:
b912b2f ('net/mlx4_core: Warn if device doesn't have enough PCI bandwidth')
Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Sun, 4 May 2014 14:07:24 +0000 (17:07 +0300)]
net/mlx4_core: Load the Eth driver first
When running in SRIOV mode, VM that is assigned with a non-provisioned
Ethernet VFs get themselves a random mac when the Eth driver starts. In
this case, if the IB driver startup code that deals with RoCE runs first,
it will use a zero mac as the source mac for the Para-Virtual CM MADs
which is buggy. To handle that, we change the order of loading.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matan Barak [Sun, 4 May 2014 14:07:23 +0000 (17:07 +0300)]
net/mlx4_core: Fix slave id computation for single port VF
The code that deals with computing the slave id based on a given GID
gave wrong results when the number of single port VFs wasn't the
same for port 1 vs. port 2 and the relevant VF is single ported on
port 2. As a result, incoming CM MADs were dispatched to the wrong VF.
Fixed that and added documentation to clarify the computation steps.
Fixes:
449fc48 ('net/mlx4: Adapt code for N-Port VF')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jack Morgenstein [Sun, 4 May 2014 14:07:22 +0000 (17:07 +0300)]
net/mlx4_core: Adjust port number in qp_attach wrapper when detaching
When using single ported VFs and the VF is using port 2, we need
to adjust the port accordingly (change it from 1 to 2).
Fixes:
449fc48 ('net/mlx4: Adapt code for N-Port VF')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans de Goede [Mon, 5 May 2014 16:36:43 +0000 (09:36 -0700)]
Input: elantech - fix touchpad initialization on Gigabyte U2442
The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept
0x0b as initialization value for r10, this stand-alone version of the
driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2
Uses 0x03 which does work, so this means not setting bit 3 of r10 which
sets: "Enable Real H/W Resolution In Absolute mode"
Which will result in half the x and y resolution we get with that bit set,
so simply not setting it everywhere is not a solution. We've been unable to
find a way to identify touchpads where setting the bit will fail, so this
patch uses a dmi based blacklist for this.
https://bugzilla.kernel.org/show_bug.cgi?id=61151
Cc: stable@vger.kernel.org
Reported-by: Philipp Wolfer <ph.wolfer@gmail.com>
Tested-by: Philipp Wolfer <ph.wolfer@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Bjørn Mork [Fri, 2 May 2014 21:27:00 +0000 (23:27 +0200)]
net: cdc_ncm: fix buffer overflow
Commit
4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs
if we send ZLPs") changed the padding logic for devices with the ZLP
flag set. This meant that frames of any size will be sent without
additional padding, except for the single byte added if the size is
a multiple of the USB packet size. But if the unpadded size is
identical to the maximum frame size, and the maximum size is a
multiplum of the USB packet size, then this one-byte padding will
overflow the buffer.
Prevent padding if already at maximum frame size, letting usbnet
transmit a ZLP instead in this case.
Fixes:
4d619f625a60 ("net: cdc_ncm: no point in filling up the NTBs if we send ZLPs")
Reported by: Yu-an Shih <yshih@nvidia.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven [Fri, 2 May 2014 04:29:21 +0000 (06:29 +0200)]
Altera TSE: ALTERA_TSE should depend on HAS_DMA
If NO_DMA=y:
drivers/built-in.o: In function `altera_tse_probe':
altera_tse_main.c:(.text+0x25ec2e): undefined reference to `dma_set_mask'
altera_tse_main.c:(.text+0x25ec78): undefined reference to `dma_supported'
altera_tse_main.c:(.text+0x25ecb6): undefined reference to `dma_supported'
drivers/built-in.o: In function `sgdma_async_read':
altera_sgdma.c:(.text+0x25f620): undefined reference to `dma_sync_single_for_cpu'
drivers/built-in.o: In function `sgdma_uninitialize':
(.text+0x25f678): undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `sgdma_uninitialize':
(.text+0x25f696): undefined reference to `dma_unmap_single'
drivers/built-in.o: In function `sgdma_initialize':
(.text+0x25f6f0): undefined reference to `dma_map_single'
drivers/built-in.o: In function `sgdma_initialize':
(.text+0x25f702): undefined reference to `dma_mapping_error'
drivers/built-in.o: In function `sgdma_tx_buffer':
(.text+0x25f92a): undefined reference to `dma_sync_single_for_cpu'
drivers/built-in.o: In function `sgdma_rx_status':
(.text+0x25fa24): undefined reference to `dma_sync_single_for_cpu'
make[3]: *** [vmlinux] Error 1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy King [Thu, 1 May 2014 22:20:43 +0000 (15:20 -0700)]
vsock: Make transport the proto owner
Right now the core vsock module is the owner of the proto family. This
means there's nothing preventing the transport module from unloading if
there are open sockets, which results in a panic. Fix that by allowing
the transport to be the owner, which will refcount it properly.
Includes version bump to 1.0.1.0-k
Passes checkpatch this time, I swear...
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Andy King <acking@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>