OSDN Git Service
Larry Finger [Thu, 22 Dec 2011 00:47:59 +0000 (18:47 -0600)]
b43legacy: Avoid packet losses in the dma worker code
This patch addresses a bug in the dma worker code that keeps draining
packets even when the hardware queues are full. In such cases packets
can not be passed down to the device and are erroneusly dropped by the
code. It is based on commit
bad6919469662b7c92bc6353642aaaa777b36bac,
which fixes the same problem in b43.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 21 Dec 2011 23:47:19 +0000 (00:47 +0100)]
b43: N-PHY: fix typo in TX power fix
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 21 Dec 2011 23:47:18 +0000 (00:47 +0100)]
b43: N-PHY: fix controling RF override
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 21 Dec 2011 23:47:17 +0000 (00:47 +0100)]
b43: N-PHY: update gain ctl workarounds
Specs were updated, now we match wl according to MMIO dumps.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Wed, 21 Dec 2011 23:47:16 +0000 (00:47 +0100)]
b43: add lacking boardflags defines
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Wed, 21 Dec 2011 17:27:01 +0000 (09:27 -0800)]
ath9k: make ath_mci_duty_cycle static
This fixes this sparse warning:
CHECK drivers/net/wireless/ath/ath9k/mci.c
drivers/net/wireless/ath/ath9k/mci.c:23:4: warning: symbol 'ath_mci_duty_cycle' was not declared. Should it be static?
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Djalal Harouni [Wed, 21 Dec 2011 00:21:47 +0000 (01:21 +0100)]
drivers/iwlwifi: use dma_zalloc_coherent() for DMA allocation
Replace dma_alloc_coherent()+memset() with the new dma_zalloc_coherent()
Signed-off-by: Djalal Harouni <tixxdz@opendz.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 20 Dec 2011 21:45:49 +0000 (22:45 +0100)]
b43: N-PHY: get idle TSSI values
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 20 Dec 2011 21:45:48 +0000 (22:45 +0100)]
b43: N-PHY: fix success condition of running samples
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 20 Dec 2011 21:45:47 +0000 (22:45 +0100)]
b43: N-PHY: move common TX/RX functions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 20:23:38 +0000 (12:23 -0800)]
cfg80211: relicense reg.c reg.h and genregdb.awk to ISC
Following the tradition we have had with ath5k, ath9k, CRDA,
wireless-regdb I'd like to license this code under the permissive ISC
license for the code sharing purposes with other OSes, it'd sure be nice
to help the landscape in this area. Although I am %82.89 owner of the
regulatory code I have asked every contributor to the regulatory code
and have receieved positive Acked-bys from everyone except two deceased
entities:
o Frans Pop RIP 2010 [0]
- Frans Pop <elendil@planet.nl>
- Frans Pop <fjp@debian.org>
o Nokia RIP February, 11, 2011 [1], [2]
- ext-yuri.ershov@nokia.com
- kalle.valo@nokia.com
Frans Pop's contribution was a simple patch
55f98938, titled,
"wireless: remove trailing space in messages" which just add a \n
to some printk lines. I'm going to treat these additions as
uncopyrightable.
As for the contributions made by employees on behalf of Nokia
my contact point was Petri Karhula <petri.karhula@nokia.com> but
after one month he noted he had not been able to get traction from the
legal department on this request, as such it I proceeded by replacing
their contributions in previous patches.
The end goal is to help a clean rewrite that starts in userspace
that is shared under ISC license which currently is taking place with
the regulatory simulator [3].
[0] http://lists.debian.org/debian-devel/2011/12/msg00263.html
[1] http://press.nokia.com/2011/02/11/nokia-outlines-new-strategy-introduces-new-leadership-operational-structure/
[2] http://NokiaPlanB.com
[3] git://github.com/mcgrof/regsim.git
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mihai Moldovan <ionic@ionic.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sven Neumann <s.neumann@raumfeld.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Tony Vroon <tony@linx.net>
Acked-by: Pavel Roskin <proski@gnu.org>
Acked-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: Pat Erley <pat-lkml@erley.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Joe Perches <joe@perches.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: John Gordon <john@devicescape.com>
Acked-by: Simon Barber <protocolmagic@gmail.com>
Acked-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Acked-by: Jiri Benc <jbenc@upir.cz>
Acked-by: Bruno Randolf <br1@einfach.org>
Acked-by: Scott James Remnant <keybuk@google.com>
Acked-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 20:23:37 +0000 (12:23 -0800)]
cfg80211: replace reg.c Nokia commit 269ac5
Nokia hasn't gotten back to me in over 1 month for a relicense
change request. There are only a few changes that they contributed,
so just reverting their changes but replacing with another set.
This change replaces this commit:
commit
269ac5fd2d75b118d76a2291e28796527db2f3f8
Author: Kalle Valo <kalle.valo@nokia.com>
Date: Tue Dec 1 10:47:15 2009 +0200
cfg80211: indent regulatory messages with spaces
The regulatory messages in syslog look weird:
kernel: cfg80211: Regulatory domain: US
kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
kernel: ^I(
2402000 KHz -
2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
kernel: ^I(
5170000 KHz -
5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
kernel: ^I(
5190000 KHz -
5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
kernel: ^I(
5210000 KHz -
5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
kernel: ^I(
5230000 KHz -
5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
kernel: ^I(
5735000 KHz -
5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Indent them with four spaces instead of the tab character to get prettier
output.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Petri Karhula <petri.karhula@nokia.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 20:23:36 +0000 (12:23 -0800)]
cfg80211: replace reg.c Nokia commit
c4c32294
Nokia hasn't gotten back to me in over 1 month for a relicense
change request. There are only a few changes that they contributed,
so just reverting their changes but replacing with another set.
This change replaces this commit:
commit
c4c322941ce0d7e2b7b8794ad70683123d9cb26a
Author: Yuri Ershov <ext-yuri.ershov@nokia.com>
Date: Tue Jun 29 15:08:08 2010 +0400
cfg80211: Update of regulatory request initiator handling
In some cases there could be possible dereferencing freed pointer. The
update is intended to avoid this issue.
Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Petri Karhula <petri.karhula@nokia.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 18:46:11 +0000 (10:46 -0800)]
ath9k_hw: fix sparse complaint on ar9003_switch_com_spdt_get()
This fixes this sparse complaint:
make C=2 CF="-D__CHECK_ENDIAN__" M=drivers/net/wireless/ath/
CHECK drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: expected restricted __le32 [usertype] val
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3544:21: got restricted __le16 [usertype] switchcomspdt
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: expected restricted __le32 [usertype] val
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c:3546:21: got restricted __le16 [usertype] switchcomspdt
The eep->modalHeader5G.switchcomspdt is a le16 and we return u16,
so just return le16_to_cpu().
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 18:46:10 +0000 (10:46 -0800)]
ath5k: avoid sparse warnings on tracing
Just skip the sparse checks on tracing.
CHECK drivers/net/wireless/ath/ath5k/base.c
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: error: incompatible types for operation (<)
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: left side has type struct ath5k_hw *<noident>
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:19:1: right side has type int
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: error: incompatible types for operation (<)
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: left side has type struct ath5k_hw *<noident>
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:37:1: right side has type int
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: error: incompatible types for operation (<)
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: left side has type struct ath5k_hw *<noident>
include/trace/../../drivers/net/wireless/ath/ath5k/trace.h:63:1: right side has type int
/home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output
/home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output
/home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output
/home/mcgrof/wireless-testing/arch/x86/include/asm/jump_label.h:16:9: error: bad asm output
CC [M] drivers/net/wireless/ath/ath5k/base.o
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 18:46:09 +0000 (10:46 -0800)]
ath9k: fix tx queue sparse complaint
This fixes this rant from sparse:
CHECK drivers/net/wireless/ath/ath9k/xmit.c
drivers/net/wireless/ath/ath9k/xmit.c:107:13: warning: context imbalance in 'ath_txq_lock' - wrong count at exit
drivers/net/wireless/ath/ath9k/xmit.c:112:13: warning: context imbalance in 'ath_txq_unlock' - unexpected unlock
drivers/net/wireless/ath/ath9k/xmit.c:123:30: warning: context imbalance in 'ath_txq_unlock_complete' - unexpected unlock
CC [M] drivers/net/wireless/ath/ath9k/xmit.
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 18:46:08 +0000 (10:46 -0800)]
ath9k_hw: fix sparse warnings on ar9003_rtt.c
This fixes these sparse warnings:
CHECK drivers/net/wireless/ath/ath9k/ar9003_rtt.c
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:36:6: warning: symbol 'ar9003_hw_rtt_enable' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:41:6: warning: symbol 'ar9003_hw_rtt_disable' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:46:6: warning: symbol 'ar9003_hw_rtt_set_mask' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:52:6: warning: symbol 'ar9003_hw_rtt_force_restore' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:102:6: warning: symbol 'ar9003_hw_rtt_load_hist' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:135:6: warning: symbol 'ar9003_hw_rtt_fill_hist' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:143:6: warning: symbol 'ar9003_hw_rtt_clear_hist' was not declared. Should it be stati
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ilan Elias [Tue, 20 Dec 2011 14:57:41 +0000 (16:57 +0200)]
NFC: Handle error during NCI data exchange
Add support for NCI Interface Error Notification.
When this notification is received and we're during a
data exchange transaction, indicate an error to the NFC
core layer via the data exchange callback.
Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ilan Elias [Tue, 20 Dec 2011 14:57:40 +0000 (16:57 +0200)]
NFC: Update names and structs to NCI spec 1.0 d22
Addition, deletion, and modification of NCI constants.
Changes in NCI commands, responses, and notifications structures.
Signed-off-by: Ilan Elias <ilane@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dmitry Shmidt [Mon, 19 Dec 2011 20:32:21 +0000 (12:32 -0800)]
wireless: Protect regdomain change by mutex
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Helmut Schaa [Mon, 19 Dec 2011 10:39:54 +0000 (11:39 +0100)]
mac80211: Remove superfluous ieee80211_rx_h_remove_qos_control
This seems to not serve any purpose anymore, at least all frame
processing afterwards seems to be able to deal with QoS frames. So,
let's save the expensive memmove and just leave the QoS header in the
802.11 frame for further processing.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Mon, 2 Jan 2012 21:43:54 +0000 (16:43 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/padovan/bluetooth-next
Gustavo F. Padovan [Tue, 27 Dec 2011 16:43:41 +0000 (14:43 -0200)]
Bluetooth: Fix a compile warning in RFCOMM
sock and sk were leftover from another change.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Hemant Gupta [Fri, 23 Dec 2011 05:37:24 +0000 (11:07 +0530)]
Bluetooth: Incorrect address while storing LTK.
This patch fixes incorrect address storage while storing
Long Term Key for LE Devices using SMP (Security Manager Protocol).
The address stored should be of remote device and not of source device.
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Thu, 22 Dec 2011 18:35:05 +0000 (16:35 -0200)]
Bluetooth: Don't disable interrupt when locking the queue
We run everything in process context now.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Thu, 22 Dec 2011 18:30:27 +0000 (16:30 -0200)]
Bluetooth: remove *_bh usage from hci_dev_list and hci_cb_list
They don't need to disable interrupts anymore, we only run in process
context now.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Thu, 22 Dec 2011 18:15:42 +0000 (16:15 -0200)]
Bluetooth: Remove lock from inquiry_cache
It was never used, so removing it.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Thu, 22 Dec 2011 18:56:05 +0000 (16:56 -0200)]
Bluetooth: add debug output to l2cap_ack_timeout()
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Tue, 20 Dec 2011 18:30:44 +0000 (16:30 -0200)]
Bluetooth: Remove l2cap priority from inside RFCOMM.
RFCOMM needs a proper priority mechanism inside itself and not try to use
l2cap priority to fix its own problem.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Jesse Sung [Thu, 22 Dec 2011 02:48:47 +0000 (10:48 +0800)]
Bluetooth: Add support for BCM20702A0 [0a5c:21e3]
Add another vendor specific ID for BCM20702A0.
output of usb-devices:
T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e3 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=
9439E5CBF66C
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Brian Gix [Thu, 22 Dec 2011 00:12:13 +0000 (16:12 -0800)]
Bluetooth: Add SMP to User Passkey and Confirm
Low Energy pairing is performed through the SMP (Security Manager Protocol)
mechanism rather than HCI.
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Brian Gix [Thu, 22 Dec 2011 00:12:12 +0000 (16:12 -0800)]
Bluetooth: Add MITM mechanism to LE-SMP
To achive Man-In-The-Middle (MITM) level security with Low Energy,
we have to enable User Passkey Comparison. This commit modifies the
hard-coded JUST-WORKS pairing mechanism to support query via the MGMT
interface of Passkey comparison and User Confirmation.
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Acked-by: Marcel Holtmann<marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ulisses Furquim [Wed, 21 Dec 2011 22:02:36 +0000 (20:02 -0200)]
Bluetooth: Fix deadlocks with sock lock and L2CAP timers locks
When cancelling a delayed work (timer) in L2CAP we can not sleep holding
the sock mutex otherwise we might deadlock with an L2CAP timer handler.
This is possible because RX/TX and L2CAP timers run in different workqueues.
The scenario below illustrates the problem. Thus we are now avoiding to
sleep on the timers locks.
======================================================
[ INFO: possible circular locking dependency detected ]
3.1.0-05270-ga978dc7-dirty #239
-------------------------------------------------------
kworker/1:1/873 is trying to acquire lock:
(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<
ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
but task is already holding lock:
((&(&chan->chan_timer)->work)){+.+...}, at: [<
ffffffff81051a86>] process_one_work+0x126/0x450
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 ((&(&chan->chan_timer)->work)){+.+...}:
[<
ffffffff8106b276>] check_prevs_add+0xf6/0x170
[<
ffffffff8106b903>] validate_chain+0x613/0x790
[<
ffffffff8106dfee>] __lock_acquire+0x4be/0xac0
[<
ffffffff8106ec2d>] lock_acquire+0x8d/0xb0
[<
ffffffff81052a6f>] wait_on_work+0x4f/0x160
[<
ffffffff81052ca3>] __cancel_work_timer+0x73/0x80
[<
ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10
[<
ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth]
[<
ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth]
[<
ffffffff8130811b>] kernel_connect+0xb/0x10
[<
ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm]
[<
ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm]
[<
ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm]
[<
ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm]
[<
ffffffff8130bd7e>] sys_connect+0xae/0xc0
[<
ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220
[<
ffffffff813b2089>] sysenter_dispatch+0x7/0x30
-> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}:
[<
ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0
[<
ffffffff8106b276>] check_prevs_add+0xf6/0x170
[<
ffffffff8106b903>] validate_chain+0x613/0x790
[<
ffffffff8106dfee>] __lock_acquire+0x4be/0xac0
[<
ffffffff8106ec2d>] lock_acquire+0x8d/0xb0
[<
ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0
[<
ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
[<
ffffffff81051ae4>] process_one_work+0x184/0x450
[<
ffffffff8105276e>] worker_thread+0x15e/0x340
[<
ffffffff81057bb6>] kthread+0x96/0xa0
[<
ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((&(&chan->chan_timer)->work));
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
lock((&(&chan->chan_timer)->work));
lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
*** DEADLOCK ***
2 locks held by kworker/1:1/873:
#0: (events){.+.+.+}, at: [<
ffffffff81051a86>] process_one_work+0x126/0x450
#1: ((&(&chan->chan_timer)->work)){+.+...}, at: [<
ffffffff81051a86>] process_one_work+0x126/0x450
stack backtrace:
Pid: 873, comm: kworker/1:1 Not tainted
3.1.0-05270-ga978dc7-dirty #239
Call Trace:
[<
ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3
[<
ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0
[<
ffffffff8106b276>] check_prevs_add+0xf6/0x170
[<
ffffffff8106b903>] validate_chain+0x613/0x790
[<
ffffffff8106dfee>] __lock_acquire+0x4be/0xac0
[<
ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0
[<
ffffffff8106ea30>] ? lock_release_nested+0x100/0x110
[<
ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0
[<
ffffffff8106ec2d>] lock_acquire+0x8d/0xb0
[<
ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
[<
ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0
[<
ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
[<
ffffffff81051a86>] ? process_one_work+0x126/0x450
[<
ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth]
[<
ffffffff81051ae4>] process_one_work+0x184/0x450
[<
ffffffff81051a86>] ? process_one_work+0x126/0x450
[<
ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth]
[<
ffffffff8105276e>] worker_thread+0x15e/0x340
[<
ffffffff81052610>] ? manage_workers+0x110/0x110
[<
ffffffff81057bb6>] kthread+0x96/0xa0
[<
ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10
[<
ffffffff813af69d>] ? retint_restore_args+0xe/0xe
[<
ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70
[<
ffffffff813b1ef0>] ? gs_change+0xb/0xb
Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ulisses Furquim [Wed, 21 Dec 2011 12:11:33 +0000 (10:11 -0200)]
Bluetooth: Make HCI call directly into SCO and L2CAP event functions
The struct hci_proto and all related register/unregister and dispatching
code was removed. HCI core code now call directly the SCO and L2CAP
event functions.
Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Andrei Emeltchenko [Mon, 19 Dec 2011 14:14:18 +0000 (16:14 +0200)]
Bluetooth: Remove magic numbers from le scan cmd
Make code readable by removing magic numbers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Tue, 20 Dec 2011 19:15:56 +0000 (17:15 -0200)]
Bluetooth: fix bt_accept_dequeue() to work in process context
No local_bh_disable is needed there once we run everything in process
context. The same goes for the replacement of bh_lock_sock() by
lock_sock().
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Helmut Schaa [Wed, 21 Dec 2011 08:11:35 +0000 (09:11 +0100)]
mac80211: Keep skb->piority for relayed frames in AP mode
When mac80211 relays a frame from STA1 to STA2 in AP mode it will get
re-classified in the tx path. Unfortunately the frame protocol field
is always set to ETH_P_8023 while the classification only kicks in
for ETH_P_IP. Hence, a high priority frame from STA1 will be send to
STA2 as best effort.
Instead of running classification on the frame just use the same
priority as STA1 did. Do this by adding 256 to the skb->priority
to allow cfg80211_classify8021d to shortcut frame classification.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Wed, 21 Dec 2011 07:47:22 +0000 (23:47 -0800)]
mwifiex: fix issues in band configuration code
Currently due to following issues in the code even if device is
configured in B only, G only or BG mode using iw bitrates command,
ibss is getting created in BGN mode.
1) mwifiex_channels_to_cfg80211_channel_type() routine gives channel
type as NL80211_CHAN_HT20 for non-HT channel as well, because driver
doesn't store HT information provided by stack for the channel.
This issue is fixed by maintaining channel type information in
'adapter->channel_type'.
2) Band configuration is unnecessarily overwritten with BGN/AN while
setting channel.
This patch makes sure that "adapter->config_bands" correctly gets
modified while setting channel.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Wed, 21 Dec 2011 07:47:21 +0000 (23:47 -0800)]
mwifiex: use IEEE80211_HT_PARAM_CHA_SEC_* macros
Replace driver specific macros with the corresponding
IEEE80211_HT_PARAM_CHA_SEC_* macros defined in ieee80211.h.
Also, rename 'adapter->chan_offset' to 'adapter->sec_chan_offset'
for consistency.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Wed, 21 Dec 2011 07:47:20 +0000 (23:47 -0800)]
mwifiex: remove redundant band config code
struct mwifiex_ds_band_cfg and mwifiex_set_radio_band_cfg() routine
are unnecessary. It can be done with simple equivalant code.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 19:18:48 +0000 (11:18 -0800)]
atheros: force endian checks on atheros wireless drivers
Please NACK nasty patches.
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Marek Lindner [Tue, 20 Dec 2011 15:16:52 +0000 (23:16 +0800)]
mac80211: ibss should not purge clients it is not responsible for
The IBSS merge code calls ieee80211_sta_expire() with a relatively
short expire timeout that purges other clients prematurely. The
expire function has to check that only the clients belonging to
the vif in question are purged.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yogesh Ashok Powar [Tue, 20 Dec 2011 06:07:08 +0000 (11:37 +0530)]
mwl8k: Call ieee80211_stop_tx_ba_cb_irqsafe for already deleted BA stream
When stack calls ampdu_action with action = IEEE80211_AMPDU_TX_STOP
for a stream that has already been removed from the driver, call
ieee80211_tx_ba_stop_irqsafe to clear the stream in the stack.
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Tue, 20 Dec 2011 03:30:43 +0000 (19:30 -0800)]
ath9k: fix roadkill due to Joe's patch on ath_dbg() changes
Joe changed ath_dbg() to simpify code but while his patch was
being merged dfs.c was born and as such did not get the change
Joe envisioned. This fixes that. Test compiled with:
make allmodconfig
Cc: Joe Perches <joe@perches.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: John W. Linville <linville@tuxdriver.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 19 Dec 2011 22:00:59 +0000 (14:00 -0800)]
iwlagn: fix (remove) use of PAGE_SIZE
The ICT code erroneously uses PAGE_SIZE. The bug
is that PAGE_SIZE isn't necessarily 4096, so on
such platforms this code will not work correctly
as we'll try to attempt to read an index in the
table that the device never wrote, it always has
4096-byte pages.
Additionally, the manual alignment code here is
unnecessary -- Documentation/DMA-API-HOWTO.txt
states:
The cpu return address and the DMA bus master address are both
guaranteed to be aligned to the smallest PAGE_SIZE order which
is greater than or equal to the requested size. This invariant
exists (for example) to guarantee that if you allocate a chunk
which is smaller than or equal to 64 kilobytes, the extent of the
buffer you receive will not cross a 64K boundary.
Just use appropriate new constants and get rid of
the alignment code.
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Alan Cox [Mon, 19 Dec 2011 21:07:33 +0000 (21:07 +0000)]
rt2800: Add support for the Fujitsu Stylistic Q550
Just another USB identifier.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andres Salomon [Mon, 19 Dec 2011 20:22:58 +0000 (12:22 -0800)]
libertas: clean up scan thread handling
The libertas scan thread expects priv->scan_req to be non-NULL. In theory,
it should always be set. In practice, we've seen the following oops:
[ 8363.067444] Unable to handle kernel NULL pointer dereference at virtual address
00000004
[ 8363.067490] pgd =
c0004000
[ 8363.078393] [
00000004] *pgd=
00000000
[ 8363.086711] Internal error: Oops: 17 [#1] PREEMPT
[ 8363.091375] Modules linked in: fuse libertas_sdio libertas psmouse mousedev ov7670 mmp_camera joydev videobuf2_core videobuf2_dma_sg videobuf2_memops [last unloaded: scsi_wait_scan]
[ 8363.107490] CPU: 0 Not tainted (
3.0.0-gf7ccc69 #671)
[ 8363.112799] PC is at lbs_scan_worker+0x108/0x5a4 [libertas]
[ 8363.118326] LR is at 0x0
[ 8363.120836] pc : [<
bf03a854>] lr : [<
00000000>] psr:
60000113
[ 8363.120845] sp :
ee66bf48 ip :
00000000 fp :
00000000
[ 8363.120845] r10:
ee2c2088 r9 :
c04e2efc r8 :
eef97005
[ 8363.132231] r7 :
eee0716f r6 :
ee2c02c0 r5 :
ee2c2088 r4 :
eee07160
[ 8363.137419] r3 :
00000000 r2 :
a0000113 r1 :
00000001 r0 :
eee07160
[ 8363.143896] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 8363.157630] Control:
10c5387d Table:
2e754019 DAC:
00000015
[ 8363.163334] Process kworker/u:1 (pid: 25, stack limit = 0xee66a2f8)
While I've not found a smoking gun, there are two places that raised red flags
for me. The first is in _internal_start_scan, when we queue up a scan; we
first queue the worker, and then set priv->scan_req. There's theoretically
a 50mS delay which should be plenty, but doing things that way just seems
racy (and not in the good way).
The second is in the scan worker thread itself. Depending on the state of
priv->scan_channel, we cancel pending scan runs and then requeue a run in
300mS. We then send the scan command down to the hardware, sleep, and if
we get scan results for all the desired channels, we set priv->scan_req to
NULL. However, it that's happened in less than 300mS, what happens with
the pending scan run?
This patch addresses both of those concerns. With the patch applied, we
have not seen the oops in the past two weeks.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Luis R. Rodriguez [Mon, 19 Dec 2011 16:11:54 +0000 (08:11 -0800)]
ath9k: classify DFS debug header further
DFS_DEBUG_H is very generic, instead use something more specific
to ath9k such as ATH9K_DFS_DEBUG_H.
Reported-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Wed, 21 Dec 2011 20:02:18 +0000 (15:02 -0500)]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx
Ulisses Furquim [Wed, 21 Dec 2011 03:32:09 +0000 (01:32 -0200)]
Bluetooth: Always compile SCO and L2CAP in Bluetooth Core
The handling of SCO audio links and the L2CAP protocol are essential to
any system with Bluetooth thus are always compiled in from now on.
Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Ulisses Furquim [Tue, 20 Dec 2011 19:10:51 +0000 (17:10 -0200)]
Bluetooth: Remove global mutex hci_task_lock
The hci_task_lock mutex (previously a lock) was supposed to protect the
register/unregister of HCI protocols against RX/TX tasks. This will not
be needed anymore because SCO and L2CAP will always be compiled.
Moreover, with the recent move of RX/TX to workqueues per device the
global hci_task_lock was causing starvation between different HCI
devices.
Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Bing Zhao [Wed, 21 Dec 2011 02:19:00 +0000 (18:19 -0800)]
Bluetooth: btusb: fix bInterval for high/super speed isochronous endpoints
For high-speed/super-speed isochronous endpoints, the bInterval
value is used as exponent, 2^(bInterval-1). Luckily we have
usb_fill_int_urb() function that handles it correctly. So we just
call this function to fill in the RX URB.
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Eyal Shapira [Tue, 20 Dec 2011 12:55:38 +0000 (14:55 +0200)]
wl12xx: mark no sched scan only after FW event
stop sched scan isn't an immediate operation
and we need to wait for PERIODIC_SCAN_COMPLETE_EVENT_ID
after sending a stop before changing internal state
and notifying upper layers.
Not doing this caused problems when canceling an existing sched
scan and immediately requesting to start a new one
with a different configuration as the FW was still
in the middle of the previous sched scan.
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eyal Shapira [Tue, 20 Dec 2011 10:04:01 +0000 (12:04 +0200)]
wl12xx: fix sched scan of DFS channels
DFS channels weren't scanned properly because
min/max_duration weren't set for these channels
even though they're required by the FW.
The change sets passive_duration and min/max_duration
for all channels as the FW uses the correct parameters
according to the channel type.
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Luciano Coelho [Mon, 19 Dec 2011 14:31:55 +0000 (16:31 +0200)]
wl12xx: add missing copyright notice
The wl12xx_platform_data.c file did not have a proper copyright
notice.
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Sun, 18 Dec 2011 18:25:45 +0000 (20:25 +0200)]
wl12xx: check the actual vif operstate in wl1271_dev_notify
The current wl1271_dev_notify implementation sets the
new operstate to all associated stations (while only
a specific vif was changed).
Until we'll have a method to get the actual vif from
the given dev, check the current operstate of each vif.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Sun, 18 Dec 2011 18:25:44 +0000 (20:25 +0200)]
wl12xx: stop device role on remove_interface
When removing a sta/ibss role, the device role has to
stopped (and disabled) as well.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Sun, 18 Dec 2011 18:25:43 +0000 (20:25 +0200)]
wl12xx: fix checking of started dev role
dev_role_id only indicates whether the dev role
is enabled, not started (e.g. on IBSS merge,
the device role is enabled, but not started).
Checking for any role in ROC (in order to determine
whether dev role was started) is wrong as well,
especially in multi-vif env.
Check for started dev role only by checking the dev_hlid.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Sun, 18 Dec 2011 18:25:42 +0000 (20:25 +0200)]
wl12xx: flush packets before stopping dev role
During sta disconnection, a deauth packet is being queued to
the dev role queue. However, the dev role is being stopped
before the packet was sent.
Flush the tx queue before stopping the dev role.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Sun, 18 Dec 2011 18:25:41 +0000 (20:25 +0200)]
wl12xx: make WL1271_FLAG_IDLE flag per-vif
This flag should be set per-vif, rather than globally.
Rename the flag to indicate IN_USE (rather than IDLE), as
in the default configuration (i.e. flag is clear) the vif
should be idle.
Change all the bit operations (and elp conditions) appropriately.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Sun, 18 Dec 2011 18:25:40 +0000 (20:25 +0200)]
wl12xx: remove redundant code from wl1271_op_conf_tx
Since the conf_tx callback passes the vif as param,
we must have been added first (and mac80211 verifies it).
Remove the handling of such case.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Mon, 19 Dec 2011 10:00:03 +0000 (12:00 +0200)]
wl12xx: implement change_interface
Implement the change_interface callback by simply removing the
current vif and adding a new one after updating the vif type.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Gustavo F. Padovan [Tue, 20 Dec 2011 12:57:28 +0000 (10:57 -0200)]
Bluetooth: Rename info_work to info_timer
It makes more sense this way, since info_timer is a timer using delayed
work API.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Tue, 20 Dec 2011 12:57:27 +0000 (10:57 -0200)]
Bluetooth: convert security timer to delayed_work
This one also needs to run in process context
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Gustavo F. Padovan [Tue, 20 Dec 2011 12:57:26 +0000 (10:57 -0200)]
Bluetooth: Move l2cap_{set,clear}_timer to l2cap.h
It is the only place where it is used.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Andrei Emeltchenko [Mon, 19 Dec 2011 14:31:30 +0000 (16:31 +0200)]
Bluetooth: Clean up magic pointers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Andrei Emeltchenko [Mon, 19 Dec 2011 14:31:29 +0000 (16:31 +0200)]
Bluetooth: Check for flow control mode
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Andrei Emeltchenko [Mon, 19 Dec 2011 14:31:28 +0000 (16:31 +0200)]
Bluetooth: Initialize default flow control mode
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Andrei Emeltchenko [Mon, 19 Dec 2011 14:31:27 +0000 (16:31 +0200)]
Bluetooth: Split ctrl init to BREDR and AMP parts
Current controller initialization is moved tp bredr_init and new
function added amp_init to handle later AMP init sequence. Current
AMP init sequence include Reset and Read Local Version.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Venkataraman, Meenakshi [Thu, 15 Dec 2011 00:54:21 +0000 (16:54 -0800)]
iwlwifi: Execute runtime calibration always
Runtime DC calibration was previously conditional. Remove this
behaviour, as new devices support runtime DC calibration,
while older devices ignore the runtime DC calibration request.
This patch addresses low TX throughput issues seen with the 6205.
Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Sat, 10 Dec 2011 19:33:53 +0000 (11:33 -0800)]
iwlwifi: use bus_get_hw_id for IWL_TM_CMD_APP2DEV_GET_DEVICE_ID
instead of doing all the work in IWL_TM_CMD_APP2DEV_GET_DEVICE_ID, just use
the information from bus_get_hw_id()
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Sat, 10 Dec 2011 19:33:52 +0000 (11:33 -0800)]
iwlwifi: set hw_version in wiphy
Set the hw_version in wiphy structure
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Wed, 14 Dec 2011 15:41:36 +0000 (07:41 -0800)]
iwlwifi: deliver hw version in both string and u32 format
Add function to get hw version in both strind and u32 format
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Tue, 13 Dec 2011 08:07:40 +0000 (00:07 -0800)]
iwlagn: finer-grained HT disable
At least while debugging, a lot of people use
11n_disable=1 to disable HT completely. To be
able to figure out what parts of HT cause the
problems we see, make the parameter a bitmap,
allowing to disable all of HT and aggregation
(TX/RX) separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Fri, 9 Dec 2011 15:26:13 +0000 (07:26 -0800)]
iwlagn: add IRQ tracing
The legacy IRQs could be read from a trace by their
IO accesses, but reading the ICT doesn't leave any
trace (pun intended ;-) ) so in order to see what
input they get we need to add specific tracepoints.
While at it, fix whitespace in two related places.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Yogesh Ashok Powar [Fri, 16 Dec 2011 06:17:15 +0000 (11:47 +0530)]
mac80211: Fixing sparse warning at sta_info.c
The commit
42624d4913a00219a8fdbb4bafd634d1d843be85
created following sparse warning
>net/mac80211/sta_info.c:965:24: warning: incorrect type in assignment (different address spaces)
>net/mac80211/sta_info.c:965:24: expected struct tid_ampdu_tx *tid_tx
>net/mac80211/sta_info.c:965:24: got struct tid_ampdu_tx [noderef] <asn:4>*<noident>
Making use of rcu_dereference_protected to fix the problem.
V2:
- Replacing rcu_dereference with rcu_dereference_protected
as suggested by Johannes.
- Adding mutex_lock/unlock to satisfy the condition at
rcu_dereference_protected
Cc: Nishant Sarmukadam <nishants@marvell.com>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Mon, 19 Dec 2011 15:45:54 +0000 (16:45 +0100)]
ath9k: fix tx locking issues
The commit "ath9k: simplify tx locking" introduced a soft lockup triggered
by mac80211 sending a BAR frame triggered by a driver call to
ieee80211_tx_send_bar or ieee80211_tx_status.
Fix these issues by queueing processed tx status skbs and submitting them
to mac80211 outside of the lock.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Felix Fietkau [Sat, 17 Dec 2011 15:47:56 +0000 (16:47 +0100)]
ath9k_hw: make bluetooth coexistence support optional at compile time
Many systems (e.g. embedded systems) do not have wifi modules connected to
bluetooth modules, so bluetooth coexistence is irrelevant there. With the
addition of MCI support, ath9k picked up quite a bit of extra code that
can be compiled out this way.
This patch redefines ATH9K_HW_CAP_MCI and adds an inline wrapper for
querying the bluetooth coexistence scheme, allowing the compiler to
eliminate code that uses it, with only very little use of #ifdef.
On MIPS this reduces the total size for the modules by about 20k.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 17 Dec 2011 12:57:27 +0000 (13:57 +0100)]
b43: N-PHY: reorder functions: random cleanups
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 17 Dec 2011 12:57:26 +0000 (13:57 +0100)]
b43: N-PHY: reorder functions: move rest of workarounds
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 17 Dec 2011 12:57:25 +0000 (13:57 +0100)]
b43: N-PHY: reorder functions: move RSSI calibration
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 17 Dec 2011 12:57:24 +0000 (13:57 +0100)]
b43: N-PHY: split gain control workarounds
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 17 Dec 2011 12:57:23 +0000 (13:57 +0100)]
b43: N-PHY: reorder functions: collect RSSI selects
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 17 Dec 2011 12:57:22 +0000 (13:57 +0100)]
b43: N-PHY: reorder functions: collect samples ones
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 17 Dec 2011 12:57:21 +0000 (13:57 +0100)]
b43: N-PHY: reorder functions: collect radio ones
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Sat, 17 Dec 2011 12:57:20 +0000 (13:57 +0100)]
b43: N-PHY: reorder functions: put basic ones at beginning
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Sat, 17 Dec 2011 03:17:16 +0000 (21:17 -0600)]
rtlwifi: Fix locking problem introduces with commit
6539306b
When I tested commit
6539306, I did not notice that loading an out-of-tree
module turns off lockdep testing in kernel 3.2. For that reason, I missed
the kernel WARNING shown below:
The solution fixes the warning by partially reverting commit
6539306.
[ 84.168146] ------------[ cut here ]------------
[ 84.168155] WARNING: at kernel/mutex.c:198 mutex_lock_nested+0x309/0x310()
[ 84.168158] Hardware name: HP Pavilion dv2700 Notebook PC
[ 84.168161] Modules linked in: nfs lockd auth_rpcgss nfs_acl sunrpc af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 mperf e
xt3 jbd ide_cd_mod cdrom snd_hda_codec_conexant arc4 rtl8192ce ide_pci_generic rtl8192c_common rtlwifi snd_hda_intel mac80211 snd_hda_codec snd_pcm snd_timer
amd74xx ide_core cfg80211 k8temp snd joydev soundcore hwmon battery forcedeth i2c_nforce2 sg rfkill ac serio_raw snd_page_alloc button video i2c_core ipv6 a
utofs4 ext4 mbcache jbd2 crc16 sd_mod ahci ohci_hcd libahci libata scsi_mod ehci_hcd usbcore usb_common fan processor thermal
[ 84.168231] Pid: 1218, comm: kworker/u:2 Not tainted 3.2.0-rc5-wl+ #155
[ 84.168234] Call Trace:
[ 84.168240] [<
ffffffff81048aaa>] warn_slowpath_common+0x7a/0xb0
[ 84.168245] [<
ffffffff81048af5>] warn_slowpath_null+0x15/0x20
[ 84.168249] [<
ffffffff813811f9>] mutex_lock_nested+0x309/0x310
[ 84.168269] [<
ffffffffa00793f9>] ? rtl_ips_nic_on+0x49/0xb0 [rtlwifi]
[ 84.168277] [<
ffffffffa00793f9>] rtl_ips_nic_on+0x49/0xb0 [rtlwifi]
[ 84.168284] [<
ffffffffa007ab85>] rtl_pci_tx+0x1b5/0x560 [rtlwifi]
[ 84.168291] [<
ffffffffa007635a>] rtl_op_tx+0x9a/0xa0 [rtlwifi]
[ 84.168359] [<
ffffffffa043cf51>] __ieee80211_tx+0x181/0x2b0 [mac80211]
[ 84.168375] [<
ffffffffa043ef06>] ieee80211_tx+0xf6/0x120 [mac80211]
[ 84.168391] [<
ffffffffa043ee49>] ? ieee80211_tx+0x39/0x120 [mac80211]
[ 84.168408] [<
ffffffffa043f80b>] ieee80211_xmit+0xdb/0x100 [mac80211]
[ 84.168425] [<
ffffffffa043f730>] ? ieee80211_skb_resize.isra.26+0xb0/0xb0 [mac80211]
[ 84.168441] [<
ffffffffa0440b2a>] ieee80211_tx_skb_tid+0x5a/0x70 [mac80211]
[ 84.168458] [<
ffffffffa0443da2>] ieee80211_send_auth+0x152/0x1b0 [mac80211]
[ 84.168474] [<
ffffffffa042e169>] ieee80211_work_work+0x1049/0x1860 [mac80211]
[ 84.168489] [<
ffffffffa042d120>] ? free_work+0x20/0x20 [mac80211]
[ 84.168504] [<
ffffffffa042d120>] ? free_work+0x20/0x20 [mac80211]
[ 84.168510] [<
ffffffff81065ffc>] process_one_work+0x17c/0x530
[ 84.168514] [<
ffffffff81065f92>] ? process_one_work+0x112/0x530
[ 84.168519] [<
ffffffff81066994>] worker_thread+0x164/0x350
[ 84.168524] [<
ffffffff8108420d>] ? trace_hardirqs_on+0xd/0x10
[ 84.168528] [<
ffffffff81066830>] ? manage_workers.isra.28+0x220/0x220
[ 84.168533] [<
ffffffff8106bc17>] kthread+0x87/0x90
[ 84.168539] [<
ffffffff813854b4>] kernel_thread_helper+0x4/0x10
[ 84.168543] [<
ffffffff81382bdd>] ? retint_restore_args+0xe/0xe
[ 84.168547] [<
ffffffff8106bb90>] ? __init_kthread_worker+0x70/0x70
[ 84.168552] [<
ffffffff813854b0>] ? gs_change+0xb/0xb
[ 84.168554] ---[ end trace
f25a4fdc768c028f ]---
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stanislaw Gruska <sgruszka@redhat.com>
Cc: Chaoming Li <chaoming_li@realsil.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:20 +0000 (18:37 -0800)]
brcm80211: fmac: add Kconfig option for SDIO bus support
This patch adds a Kconfig option for SDIO bus support and abstracts
a build subset correspondingly. It's the final patch of fullmac bus
interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:19 +0000 (18:37 -0800)]
brcm80211: fmac: exclude unnecessary header files
This patch removes some headers files include lines from sdio layer
code. This is part of the fullmac bus interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:18 +0000 (18:37 -0800)]
brcm80211: fmac: move idle macros to dhd_sdio.c
The idle macros are only used by dhd_sdio.c. It's more appropriate
to place them in dhd_sdio.c instead of dhd.h.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:17 +0000 (18:37 -0800)]
brcm80211: fmac: move debug level macros to dhd_dbg.h
Debug message level macros are used for debug purpose. It would be
more appropriate to place them at dhd_dbg.h.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:16 +0000 (18:37 -0800)]
brcm80211: fmac: abstract ctrl frames interface function pointers
Abstract bus layer brcmf_bus_txctl/brcmf_bus_rxctl function
pointers for common layer. This patch is part of the fullmac bus
interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:15 +0000 (18:37 -0800)]
brcm80211: fmac: abstract bus_txdata interface function pointer
Abstract bus layer brcmf_bus_txdata function pointer for common
layer. This patch is part of the fullmac bus interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:14 +0000 (18:37 -0800)]
brcm80211: fmac: abstract bus_init interface function pointer
Abstract bus layer brcmf_bus_init function pointer for common
layer. This patch is part of the fullmac bus interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:13 +0000 (18:37 -0800)]
brcm80211: fmac: move common layer bus interface context to dhd_bus.h
dhd_bus.h is the header file for bus interface. Move functions
declarations and brcmf_bus structure to there. This is part of
the fullmac bus interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:12 +0000 (18:37 -0800)]
brcm80211: fmac: abstract bus_stop interface function pointer
Common layer should use interface function pointer stored in
brcmf_bus to invoke corresponding interface function in bus layer.
This patch is part of the fullmac bus interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:11 +0000 (18:37 -0800)]
brcm80211: fmac: move sdio related macros to sdio_host.h
dhd_bus.h will be used as the shared header file for common layer
and bus layer. It should not contain any sdio specific macros.
This patch moves them to sdio_host.h as part of the fullmac bus
interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:10 +0000 (18:37 -0800)]
brcm80211: fmac: stop referencing brcmf_sdio in common layer
brcmf_sdio is the data structure for sdio bus layer. Stop
referencing brcmf_sdio from common layer. This patch is part of
the fullmac bus interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:09 +0000 (18:37 -0800)]
brcm80211: fmac: stop referencing brcmf_pub in bus layer
brcmf_pub is the data structure for common layer. Since brcmf_bus
should be the only structure shared by common layer and bus layer,
stop referencing brcmf_pub from bus layer. This patch is part of
the fullmac bus interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Franky Lin [Sat, 17 Dec 2011 02:37:08 +0000 (18:37 -0800)]
brcm80211: fmac: move tx flow ctrl flag to bus layer
txoff is the flow control flag for transmit used in sdio layer.
Move it to bus layer data structure brcmf_sdio. Also flag
management code is moved out of brcmf_txflowcontrol(). This is
part of the fullmac bus interface refactoring.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>