OSDN Git Service
Roman Pen [Sun, 12 Mar 2017 08:17:57 +0000 (08:17 +0000)]
ext4: do not polute the extents cache while shifting extents
am:
a3068b3e80
Change-Id: I8a8eb01160a8dca91e99709f5247b9d159847c70
Roman Pen [Sun, 12 Mar 2017 08:17:48 +0000 (08:17 +0000)]
ext4: Include forgotten start block on fallocate insert range
am:
3daefdae5f
Change-Id: I96ed2bfb756e3a37c07656d632660757c100065b
Omar Sandoval [Sun, 12 Mar 2017 08:17:38 +0000 (08:17 +0000)]
loop: fix LO_FLAGS_PARTSCAN hang
am:
cd3db55c64
Change-Id: I19b2069183011982702a38dfad5f2b589bbd3f4e
Ming Lei [Sun, 12 Mar 2017 08:17:29 +0000 (08:17 +0000)]
block/loop: fix race between I/O and set_status
am:
356d71df73
Change-Id: I57316c57bb82477bd2e6d24047b9399016c48348
Theodore Ts'o [Sun, 12 Mar 2017 08:17:19 +0000 (08:17 +0000)]
jbd2: don't leak modified metadata buffers on an aborted journal
am:
973f40f368
Change-Id: I3c95a6a0e9d2daa4713da89a47c3aac6b6193d02
Mathieu Desnoyers [Sun, 12 Mar 2017 08:17:10 +0000 (08:17 +0000)]
Fix: Disable sys_membarrier when nohz_full is enabled
am:
c0ef1f537a
Change-Id: I3650becd64c5156d24dee601990d48c68057e81d
Hannes Reinecke [Sun, 12 Mar 2017 08:17:00 +0000 (08:17 +0000)]
sd: get disk reference in sd_check_events()
am:
ea240cfed9
Change-Id: Ie5d8f2f3588859d8a4f4466c158223afbf8e2ecb
Hannes Reinecke [Sun, 12 Mar 2017 08:16:50 +0000 (08:16 +0000)]
scsi: use 'scsi_device_from_queue()' for scsi_dh
am:
33950b56d2
Change-Id: Ie22776722d50f3c91cfdebd8e89284e123cf2648
Raghava Aditya Renukunta [Sun, 12 Mar 2017 08:16:41 +0000 (08:16 +0000)]
scsi: aacraid: Reorder Adapter status check
am:
2dc9a859eb
Change-Id: Idbd0d6bc38a75a802547ad44280c72f83d930604
Long Li [Sun, 12 Mar 2017 08:16:33 +0000 (08:16 +0000)]
scsi: storvsc: properly set residual data length on errors
am:
18dbfcae65
Change-Id: Icd112397502c0caed46d5c3613e9cb2720901e6f
Long Li [Sun, 12 Mar 2017 08:16:23 +0000 (08:16 +0000)]
scsi: storvsc: properly handle SRB_ERROR when sense message is present
am:
80bccab34a
Change-Id: Ia376c2f0f0a0b1328b60ed5fb707fe5a12ec64ad
Long Li [Sun, 12 Mar 2017 08:16:12 +0000 (08:16 +0000)]
scsi: storvsc: use tagged SRB requests if supported by the device
am:
5cdc8193ac
Change-Id: Id08acaf5e82dcfb9f447ba4e375f97423ae216b4
Mikulas Patocka [Sun, 12 Mar 2017 08:16:03 +0000 (08:16 +0000)]
dm stats: fix a leaked s->histogram_boundaries array
am:
6a284310d5
Change-Id: Iffdf38daa52f8e2386d20f50ae62dae523c41991
Joe Thornber [Sun, 12 Mar 2017 08:15:54 +0000 (08:15 +0000)]
dm cache: fix corruption seen when using cache > 2TB
am:
fdea1f9721
Change-Id: Ife7330de88f3c77653c946783ea95ca393b3d1b4
Davidlohr Bueso [Sun, 12 Mar 2017 08:15:46 +0000 (08:15 +0000)]
ipc/shm: Fix shmat mmap nil-page protection
am:
f0ae01568e
Change-Id: I53489954b39ece583120b8462d57a969ab1e972f
Minchan Kim [Sun, 12 Mar 2017 08:15:36 +0000 (08:15 +0000)]
mm: do not access page->mapping directly on page_endio
am:
c5c893e7c4
Change-Id: Ic37f4022408ccc77d7702ebc4be606bd94ad20e1
Vinayak Menon [Sun, 12 Mar 2017 08:15:27 +0000 (08:15 +0000)]
mm: vmpressure: fix sending wrong events on underflow
am:
66f43a5768
Change-Id: I914c9c65e90dc02251788277937daca32fd59818
Gavin Shan [Sun, 12 Mar 2017 08:15:17 +0000 (08:15 +0000)]
mm/page_alloc: fix nodes for reclaim in fast path
am:
612e4679b8
Change-Id: I134dc72c598a798d4f3dead4421c269ae7bb3791
Ashok Raj [Sun, 12 Mar 2017 08:15:08 +0000 (08:15 +0000)]
iommu/vt-d: Tylersburg isoch identity map check is done too late.
am:
31dac0e870
Change-Id: I0e8dacd983deed5a478e50a4ce4c48622668e563
CQ Tang [Sun, 12 Mar 2017 08:14:59 +0000 (08:14 +0000)]
iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu
am:
07852563db
Change-Id: I19ddfcf5d9f41e3fc8580b6449b27c1485b06e16
Leonard Crestez [Sun, 12 Mar 2017 08:14:49 +0000 (08:14 +0000)]
regulator: Fix regulator_summary for deviceless consumers
am:
5cc0cd0e3a
Change-Id: I9bcef233094a090abaa0d344853f8f249ff5351f
Arnd Bergmann [Sun, 12 Mar 2017 08:14:40 +0000 (08:14 +0000)]
staging: rtl: fix possible NULL pointer dereference
am:
272d60bfce
Change-Id: I49cd1afa12c293484de6c18eb31e67d2baa0a4d4
Hui Wang [Sun, 12 Mar 2017 08:14:31 +0000 (08:14 +0000)]
ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
am:
8c8f42c9a4
Change-Id: I0075697f99a22a1364d3ecdc993c1257662f9eb5
Takashi Iwai [Sun, 12 Mar 2017 08:14:21 +0000 (08:14 +0000)]
ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
am:
cd585d3ba5
Change-Id: I7d9b34fdcf5dcc2d88d5cd0c1ebf263eefcf6acf
Takashi Iwai [Sun, 12 Mar 2017 08:14:11 +0000 (08:14 +0000)]
ALSA: seq: Fix link corruption by event error handling
am:
003aa34372
Change-Id: I5c14157cc11ff09f45950d0b9a58dcc2c22535d4
Takashi Iwai [Sun, 12 Mar 2017 08:14:01 +0000 (08:14 +0000)]
ALSA: ctxfi: Fallback DMA mask to 32bit
am:
70dbc00f7e
Change-Id: If4ce0b2e8a727aa341bdd484eb920ba33f09707d
Takashi Iwai [Sun, 12 Mar 2017 08:13:51 +0000 (08:13 +0000)]
ALSA: timer: Reject user params with too small ticks
am:
9879f9d01a
Change-Id: I3fb699e66b0e89da94eea1124c89fedf9f2cc576
Jaroslav Kysela [Sun, 12 Mar 2017 08:13:42 +0000 (08:13 +0000)]
ALSA: hda - fix Lewisburg audio issue
am:
b9bf1f0657
Change-Id: Ib9f0327ded792418c9c5d5531257fdacfef23ad8
Kai-Heng Feng [Sun, 12 Mar 2017 08:13:33 +0000 (08:13 +0000)]
ALSA: hda/realtek - Cannot adjust speaker's volume on a Dell AIO
am:
1f4f37076d
Change-Id: I644061092b4149f275fa5de0354a57ad2711b9a7
Alexandre Belloni [Sun, 12 Mar 2017 08:13:24 +0000 (08:13 +0000)]
ARM: dts: at91: Enable DMA on sama5d2_xplained console
am:
6b1d7b6f54
Change-Id: Id2e050faf5544cd7ea2cd5f414c851550ea59f70
Alexandre Belloni [Sun, 12 Mar 2017 08:13:15 +0000 (08:13 +0000)]
ARM: dts: at91: Enable DMA on sama5d4_xplained console
am:
be83ed085f
Change-Id: Ia3caad88499707a3c3c011e29b89dc2197231ba4
Alexandre Belloni [Sun, 12 Mar 2017 08:13:05 +0000 (08:13 +0000)]
ARM: at91: define LPDDR types
am:
b401418c6c
Change-Id: I3a3a6313fb6e75193fd502aa2b54401d218493c0
Randy Dunlap [Sun, 12 Mar 2017 08:12:57 +0000 (08:12 +0000)]
media: fix dm1105.c build error
am:
f3a0b20040
Change-Id: Icd2cd4503a794b66d64c45659b73f870d032eb65
Guennadi Liakhovetski [Sun, 12 Mar 2017 08:12:47 +0000 (08:12 +0000)]
uvcvideo: Fix a wrong macro
am:
b0bde9f6a0
Change-Id: I5c521825b9659f7ff74b8708550930f86a278b91
Nicolas Iooss [Sun, 12 Mar 2017 08:12:38 +0000 (08:12 +0000)]
am437x-vpfe: always assign bpp variable
am:
5988e73201
Change-Id: I2bdb0d627980fa6a38dd774e1f27c400edcbae76
Paul Burton [Sun, 12 Mar 2017 08:12:28 +0000 (08:12 +0000)]
MIPS: Handle microMIPS jumps in the same way as MIPS32/MIPS64 jumps
am:
ab7546e491
Change-Id: Idcfd907ca44b5d0e5231e07e1945eb7a1e874f39
Paul Burton [Sun, 12 Mar 2017 08:12:19 +0000 (08:12 +0000)]
MIPS: Calculate microMIPS ra properly when unwinding the stack
am:
cc387ae089
Change-Id: Ic8e08f715b0137db795069024c05dbbdcba65355
Paul Burton [Sun, 12 Mar 2017 08:12:09 +0000 (08:12 +0000)]
MIPS: Fix is_jump_ins() handling of 16b microMIPS instructions
am:
d75d675a05
Change-Id: I21332f13b7cb7a85cca19151ef909445879e2b44
Paul Burton [Sun, 12 Mar 2017 08:12:01 +0000 (08:12 +0000)]
MIPS: Fix get_frame_info() handling of microMIPS function size
am:
72a0cfae59
Change-Id: Id3a27d9cecbf32d7796c41fbd66865e04a0bf5a4
Paul Burton [Sun, 12 Mar 2017 08:11:51 +0000 (08:11 +0000)]
MIPS: Prevent unaligned accesses during stack unwinding
am:
2998bf60d3
Change-Id: I35cd0b6a76195d79d0416447d90f5168637c00dd
Paul Burton [Sun, 12 Mar 2017 08:11:42 +0000 (08:11 +0000)]
MIPS: Clear ISA bit correctly in get_frame_info()
am:
0d45490221
Change-Id: I531d407a5a29d93c60ac199b7ff7d13ced328c05
Felix Fietkau [Sun, 12 Mar 2017 08:11:34 +0000 (08:11 +0000)]
MIPS: Lantiq: Keep ethernet enabled during boot
am:
f1be0f5814
Change-Id: Id823b48dec5de9b66ca8f98eaffd4cb5eba52efe
James Cowgill [Sun, 12 Mar 2017 08:11:25 +0000 (08:11 +0000)]
MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
am:
093292b8f8
Change-Id: I366bdcba20ff678b6796f1805be0940297292dcd
Mirko Parthey [Sun, 12 Mar 2017 08:11:15 +0000 (08:11 +0000)]
MIPS: BCM47XX: Fix button inversion for Asus WL-500W
am:
b32e43cf3f
Change-Id: Ida853a4548c2f09b1fe2d070c25cad409d022525
Ralf Baechle [Sun, 12 Mar 2017 08:11:06 +0000 (08:11 +0000)]
MIPS: Fix special case in 64 bit IP checksumming.
am:
5636da7aba
Change-Id: I9ca72b7b7dbf94ecc4be5aaa910024ead497165c
Shuah Khan [Sun, 12 Mar 2017 08:10:58 +0000 (08:10 +0000)]
samples: move mic/mpssd example code from Documentation
am:
faf6aa4b12
Change-Id: I7ed0b2c9987635d6e46fa9207cc9c7457896b536
Roman Pen [Mon, 9 Jan 2017 02:00:35 +0000 (21:00 -0500)]
ext4: do not polute the extents cache while shifting extents
commit
03e916fa8b5577d85471452a3d0c5738aa658dae upstream.
Inside ext4_ext_shift_extents() function ext4_find_extent() is called
without EXT4_EX_NOCACHE flag, which should prevent cache population.
This leads to oudated offsets in the extents tree and wrong blocks
afterwards.
Patch fixes the problem providing EXT4_EX_NOCACHE flag for each
ext4_find_extents() call inside ext4_ext_shift_extents function.
Fixes:
331573febb6a2
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Pen [Mon, 9 Jan 2017 01:59:35 +0000 (20:59 -0500)]
ext4: Include forgotten start block on fallocate insert range
commit
2a9b8cba62c0741109c33a2be700ff3d7703a7c2 upstream.
While doing 'insert range' start block should be also shifted right.
The bug can be easily reproduced by the following test:
ptr = malloc(4096);
assert(ptr);
fd = open("./ext4.file", O_CREAT | O_TRUNC | O_RDWR, 0600);
assert(fd >= 0);
rc = fallocate(fd, 0, 0, 8192);
assert(rc == 0);
for (i = 0; i < 2048; i++)
*((unsigned short *)ptr + i) = 0xbeef;
rc = pwrite(fd, ptr, 4096, 0);
assert(rc == 4096);
rc = pwrite(fd, ptr, 4096, 4096);
assert(rc == 4096);
for (block = 2; block < 1000; block++) {
rc = fallocate(fd, FALLOC_FL_INSERT_RANGE, 4096, 4096);
assert(rc == 0);
for (i = 0; i < 2048; i++)
*((unsigned short *)ptr + i) = block;
rc = pwrite(fd, ptr, 4096, 4096);
assert(rc == 4096);
}
Because start block is not included in the range the hole appears at
the wrong offset (just after the desired offset) and the following
pwrite() overwrites already existent block, keeping hole untouched.
Simple way to verify wrong behaviour is to check zeroed blocks after
the test:
$ hexdump ./ext4.file | grep '0000 0000'
The root cause of the bug is a wrong range (start, stop], where start
should be inclusive, i.e. [start, stop].
This patch fixes the problem by including start into the range. But
not to break left shift (range collapse) stop points to the beginning
of the a block, not to the end.
The other not obvious change is an iterator check on validness in a
main loop. Because iterator is unsigned the following corner case
should be considered with care: insert a block at 0 offset, when stop
variables overflows and never becomes less than start, which is 0.
To handle this special case iterator is set to NULL to indicate that
end of the loop is reached.
Fixes:
331573febb6a2
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Sandoval [Wed, 1 Mar 2017 18:42:38 +0000 (10:42 -0800)]
loop: fix LO_FLAGS_PARTSCAN hang
commit
e02898b423802b1f3a3aaa7f16e896da069ba8f7 upstream.
loop_reread_partitions() needs to do I/O, but we just froze the queue,
so we end up waiting forever. This can easily be reproduced with losetup
-P. Fix it by moving the reread to after we unfreeze the queue.
Fixes:
ecdd09597a57 ("block/loop: fix race between I/O and set_status")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ming Lei [Sat, 11 Feb 2017 03:40:45 +0000 (11:40 +0800)]
block/loop: fix race between I/O and set_status
commit
ecdd09597a57251323b0de50e3d45e69298c4a83 upstream.
Inside set_status, transfer need to setup again, so
we have to drain IO before the transition, otherwise
oops may be triggered like the following:
divide error: 0000 [#1] SMP KASAN
CPU: 0 PID: 2935 Comm: loop7 Not tainted 4.10.0-rc7+ #213
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
task:
ffff88006ba1e840 task.stack:
ffff880067338000
RIP: 0010:transfer_xor+0x1d1/0x440 drivers/block/loop.c:110
RSP: 0018:
ffff88006733f108 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
ffff8800688d7000 RCX:
0000000000000059
RDX:
0000000000000000 RSI:
1ffff1000d743f43 RDI:
ffff880068891c08
RBP:
ffff88006733f160 R08:
ffff8800688d7001 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8800688d7000
R13:
ffff880067b7d000 R14:
dffffc0000000000 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff88006d000000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000006c17e0 CR3:
0000000066e3b000 CR4:
00000000001406f0
Call Trace:
lo_do_transfer drivers/block/loop.c:251 [inline]
lo_read_transfer drivers/block/loop.c:392 [inline]
do_req_filebacked drivers/block/loop.c:541 [inline]
loop_handle_cmd drivers/block/loop.c:1677 [inline]
loop_queue_work+0xda0/0x49b0 drivers/block/loop.c:1689
kthread_worker_fn+0x4c3/0xa30 kernel/kthread.c:630
kthread+0x326/0x3f0 kernel/kthread.c:227
ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
Code: 03 83 e2 07 41 29 df 42 0f b6 04 30 4d 8d 44 24 01 38 d0 7f 08
84 c0 0f 85 62 02 00 00 44 89 f8 41 0f b6 48 ff 25 ff 01 00 00 99 <f7>
7d c8 48 63 d2 48 03 55 d0 48 89 d0 48 89 d7 48 c1 e8 03 83
RIP: transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP:
ffff88006733f108
---[ end trace
0166f7bd3b0c0933 ]---
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Sun, 5 Feb 2017 04:14:19 +0000 (23:14 -0500)]
jbd2: don't leak modified metadata buffers on an aborted journal
commit
e112666b4959b25a8552d63bc564e1059be703e8 upstream.
If the journal has been aborted, we shouldn't mark the underlying
buffer head as dirty, since that will cause the metadata block to get
modified. And if the journal has been aborted, we shouldn't allow
this since it will almost certainly lead to a corrupted file system.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Desnoyers [Thu, 3 Nov 2016 16:29:28 +0000 (10:29 -0600)]
Fix: Disable sys_membarrier when nohz_full is enabled
commit
907565337ebf998a68cb5c5b2174ce5e5da065eb upstream.
Userspace applications should be allowed to expect the membarrier system
call with MEMBARRIER_CMD_SHARED command to issue memory barriers on
nohz_full CPUs, but synchronize_sched() does not take those into
account.
Given that we do not want unrelated processes to be able to affect
real-time sensitive nohz_full CPUs, simply return ENOSYS when membarrier
is invoked on a kernel with enabled nohz_full CPUs.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Reinecke [Tue, 26 Apr 2016 06:06:58 +0000 (08:06 +0200)]
sd: get disk reference in sd_check_events()
commit
eb72d0bb84eee5d0dc3044fd17b75e7101dabb57 upstream.
sd_check_events() is called asynchronously, and might race
with device removal. So always take a disk reference when
processing the event to avoid the device being removed while
the event is processed.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Jinpu Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Reinecke [Fri, 17 Feb 2017 08:02:45 +0000 (09:02 +0100)]
scsi: use 'scsi_device_from_queue()' for scsi_dh
commit
857de6e00778738dc3d61f75acbac35bdc48e533 upstream.
The device handler needs to check if a given queue belongs to a scsi
device; only then does it make sense to attach a device handler.
[mkp: dropped flags]
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Raghava Aditya Renukunta [Thu, 16 Feb 2017 20:51:21 +0000 (12:51 -0800)]
scsi: aacraid: Reorder Adapter status check
commit
c421530bf848604e97d0785a03b3fe2c62775083 upstream.
The driver currently checks the SELF_TEST_FAILED first and then
KERNEL_PANIC next. Under error conditions(boot code failure) both
SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time.
The driver has the capability to reset the controller on an KERNEL_PANIC,
but not on SELF_TEST_FAILED.
Fixed by first checking KERNEL_PANIC and then the others.
Fixes:
e8b12f0fb835223752 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <David.Carroll@microsemi.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Long Li [Thu, 15 Dec 2016 02:46:03 +0000 (18:46 -0800)]
scsi: storvsc: properly set residual data length on errors
commit
40630f462824ee24bc00d692865c86c3828094e0 upstream.
On I/O errors, the Windows driver doesn't set data_transfer_length
on error conditions other than SRB_STATUS_DATA_OVERRUN.
In these cases we need to set data_transfer_length to 0,
indicating there is no data transferred. On SRB_STATUS_DATA_OVERRUN,
data_transfer_length is set by the Windows driver to the actual data transferred.
Reported-by: Shiva Krishna <Shiva.Krishna@nimblestorage.com>
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Long Li [Thu, 15 Dec 2016 02:46:02 +0000 (18:46 -0800)]
scsi: storvsc: properly handle SRB_ERROR when sense message is present
commit
bba5dc332ec2d3a685cb4dae668c793f6a3713a3 upstream.
When sense message is present on error, we should pass along to the upper
layer to decide how to deal with the error.
This patch fixes connectivity issues with Fiber Channel devices.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Long Li [Thu, 15 Dec 2016 02:46:01 +0000 (18:46 -0800)]
scsi: storvsc: use tagged SRB requests if supported by the device
commit
3cd6d3d9b1abab8dcdf0800224ce26daac24eea2 upstream.
Properly set SRB flags when hosting device supports tagged queuing.
This patch improves the performance on Fiber Channel disks.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Wed, 15 Feb 2017 17:06:19 +0000 (12:06 -0500)]
dm stats: fix a leaked s->histogram_boundaries array
commit
6085831883c25860264721df15f05bbded45e2a2 upstream.
Fixes:
dfcfac3e4cd9 ("dm stats: collect and report histogram of IO latencies")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Thornber [Thu, 9 Feb 2017 16:46:18 +0000 (11:46 -0500)]
dm cache: fix corruption seen when using cache > 2TB
commit
ca763d0a53b264a650342cee206512bc92ac7050 upstream.
A rounding bug due to compiler generated temporary being 32bit was found
in remap_to_cache(). A localized cast in remap_to_cache() fixes the
corruption but this preferred fix (changing from uint32_t to sector_t)
eliminates potential for future rounding errors elsewhere.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Davidlohr Bueso [Mon, 27 Feb 2017 22:28:24 +0000 (14:28 -0800)]
ipc/shm: Fix shmat mmap nil-page protection
commit
95e91b831f87ac8e1f8ed50c14d709089b4e01b8 upstream.
The issue is described here, with a nice testcase:
https://bugzilla.kernel.org/show_bug.cgi?id=192931
The problem is that shmat() calls do_mmap_pgoff() with MAP_FIXED, and
the address rounded down to 0. For the regular mmap case, the
protection mentioned above is that the kernel gets to generate the
address -- arch_get_unmapped_area() will always check for MAP_FIXED and
return that address. So by the time we do security_mmap_addr(0) things
get funky for shmat().
The testcase itself shows that while a regular user crashes, root will
not have a problem attaching a nil-page. There are two possible fixes
to this. The first, and which this patch does, is to simply allow root
to crash as well -- this is also regular mmap behavior, ie when hacking
up the testcase and adding mmap(... |MAP_FIXED). While this approach
is the safer option, the second alternative is to ignore SHM_RND if the
rounded address is 0, thus only having MAP_SHARED flags. This makes the
behavior of shmat() identical to the mmap() case. The downside of this
is obviously user visible, but does make sense in that it maintains
semantics after the round-down wrt 0 address and mmap.
Passes shm related ltp tests.
Link: http://lkml.kernel.org/r/1486050195-18629-1-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Gareth Evans <gareth.evans@contextis.co.uk>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minchan Kim [Fri, 24 Feb 2017 22:59:59 +0000 (14:59 -0800)]
mm: do not access page->mapping directly on page_endio
commit
dd8416c47715cf324c9a16f13273f9fda87acfed upstream.
With rw_page, page_endio is used for completing IO on a page and it
propagates write error to the address space if the IO fails. The
problem is it accesses page->mapping directly which might be okay for
file-backed pages but it shouldn't for anonymous page. Otherwise, it
can corrupt one of field from anon_vma under us and system goes panic
randomly.
swap_writepage
bdev_writepage
ops->rw_page
I encountered the BUG during developing new zram feature and it was
really hard to figure it out because it made random crash, somtime
mmap_sem lockdep, sometime other places where places never related to
zram/zsmalloc, and not reproducible with some configuration.
When I consider how that bug is subtle and people do fast-swap test with
brd, it's worth to add stable mark, I think.
Fixes:
dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vinayak Menon [Fri, 24 Feb 2017 22:59:39 +0000 (14:59 -0800)]
mm: vmpressure: fix sending wrong events on underflow
commit
e1587a4945408faa58d0485002c110eb2454740c upstream.
At the end of a window period, if the reclaimed pages is greater than
scanned, an unsigned underflow can result in a huge pressure value and
thus a critical event. Reclaimed pages is found to go higher than
scanned because of the addition of reclaimed slab pages to reclaimed in
shrink_node without a corresponding increment to scanned pages.
Minchan Kim mentioned that this can also happen in the case of a THP
page where the scanned is 1 and reclaimed could be 512.
Link: http://lkml.kernel.org/r/1486641577-11685-1-git-send-email-vinmenon@codeaurora.org
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Shiraz Hashim <shashim@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gavin Shan [Fri, 24 Feb 2017 22:59:33 +0000 (14:59 -0800)]
mm/page_alloc: fix nodes for reclaim in fast path
commit
e02dc017c3032dcdce1b993af0db135462e1b4b7 upstream.
When @node_reclaim_node isn't 0, the page allocator tries to reclaim
pages if the amount of free memory in the zones are below the low
watermark. On Power platform, none of NUMA nodes are scanned for page
reclaim because no nodes match the condition in zone_allows_reclaim().
On Power platform, RECLAIM_DISTANCE is set to 10 which is the distance
of Node-A to Node-A. So the preferred node even won't be scanned for
page reclaim.
__alloc_pages_nodemask()
get_page_from_freelist()
zone_allows_reclaim()
Anton proposed the test code as below:
# cat alloc.c
:
int main(int argc, char *argv[])
{
void *p;
unsigned long size;
unsigned long start, end;
start = time(NULL);
size = strtoul(argv[1], NULL, 0);
printf("To allocate %ldGB memory\n", size);
size <<= 30;
p = malloc(size);
assert(p);
memset(p, 0, size);
end = time(NULL);
printf("Used time: %ld seconds\n", end - start);
sleep(3600);
return 0;
}
The system I use for testing has two NUMA nodes. Both have 128GB
memory. In below scnario, the page caches on node#0 should be reclaimed
when it encounters pressure to accommodate request of allocation.
# echo 2 > /proc/sys/vm/zone_reclaim_mode; \
sync; \
echo 3 > /proc/sys/vm/drop_caches; \
# taskset -c 0 cat file.32G > /dev/null; \
grep FilePages /sys/devices/system/node/node0/meminfo
Node 0 FilePages:
33619712 kB
# taskset -c 0 ./alloc 128
# grep FilePages /sys/devices/system/node/node0/meminfo
Node 0 FilePages:
33619840 kB
# grep MemFree /sys/devices/system/node/node0/meminfo
Node 0 MemFree: 186816 kB
With the patch applied, the pagecache on node-0 is reclaimed when its
free memory is running out. It's the expected behaviour.
# echo 2 > /proc/sys/vm/zone_reclaim_mode; \
sync; \
echo 3 > /proc/sys/vm/drop_caches
# taskset -c 0 cat file.32G > /dev/null; \
grep FilePages /sys/devices/system/node/node0/meminfo
Node 0 FilePages:
33605568 kB
# taskset -c 0 ./alloc 128
# grep FilePages /sys/devices/system/node/node0/meminfo
Node 0 FilePages:
1379520 kB
# grep MemFree /sys/devices/system/node/node0/meminfo
Node 0 MemFree: 317120 kB
Fixes:
5f7a75acdb24 ("mm: page_alloc: do not cache reclaim distances")
Link: http://lkml.kernel.org/r/1486532455-29613-1-git-send-email-gwshan@linux.vnet.ibm.com
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ashok Raj [Mon, 30 Jan 2017 17:39:53 +0000 (09:39 -0800)]
iommu/vt-d: Tylersburg isoch identity map check is done too late.
commit
21e722c4c8377b5bc82ad058fed12165af739c1b upstream.
The check to set identity map for tylersburg is done too late. It needs
to be done before the check for identity_map domain is done.
To: Joerg Roedel <joro@8bytes.org>
To: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: Ashok Raj <ashok.raj@intel.com>
Fixes:
86080ccc22 ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Reported-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CQ Tang [Mon, 30 Jan 2017 17:39:52 +0000 (09:39 -0800)]
iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu
commit
aaa59306b0b7e0ca4ba92cc04c5db101cbb1c096 upstream.
Some of the macros are incorrect with wrong bit-shifts resulting in picking
the incorrect invalidation granularity. Incorrect Source-ID in extended
devtlb invalidation caused device side errors.
To: Joerg Roedel <joro@8bytes.org>
To: David Woodhouse <dwmw2@infradead.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: CQ Tang <cq.tang@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Fixes:
2f26e0a9 ("iommu/vt-d: Add basic SVM PASID support")
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leonard Crestez [Tue, 14 Feb 2017 15:31:03 +0000 (17:31 +0200)]
regulator: Fix regulator_summary for deviceless consumers
commit
e42a46b6f52473661ad192f76a128a68fe301df4 upstream.
It is allowed to call regulator_get with a NULL dev argument
(_regulator_get explicitly checks for it) but this causes an error later
when printing /sys/kernel/debug/regulator_summary.
Fix this by explicitly handling "deviceless" consumers in the debugfs code.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 11 Jan 2017 14:53:08 +0000 (15:53 +0100)]
staging: rtl: fix possible NULL pointer dereference
commit
6e017006022abfea5d2466cad936065f45763ad1 upstream.
gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with
a destination argument that an earlier function call may have set to NULL:
staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr':
staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull]
staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr':
staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull]
I'm fixing this by adding a NULL pointer check and returning failure
from the function, which is hopefully already handled properly.
This seems to date back to when the drivers were originally added,
so backporting the fix to stable seems appropriate. There are other
related realtek drivers in the kernel, but none of them contain a
function with a similar name or produce this warning.
Fixes:
1cc18a22b96b ("staging: r8188eu: Add files for new driver - part 5")
Fixes:
2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Wang [Mon, 27 Feb 2017 02:11:47 +0000 (10:11 +0800)]
ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
commit
29693efcea0f38cf40d0055d2401490a4f9bf8be upstream.
On this machine, the micmute button is connected to Line2 of the
codec and the micmute led is connected to GPIO2 of the codec.
After applying this quirk, both hotkey and led work well.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 28 Feb 2017 16:27:57 +0000 (17:27 +0100)]
ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
commit
493de342748cc6f52938096f5480cf291da58a0b upstream.
Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like
Inspiron 7599 to support its subwoofer speaker.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 28 Feb 2017 21:15:51 +0000 (22:15 +0100)]
ALSA: seq: Fix link corruption by event error handling
commit
f3ac9f737603da80c2da3e84b89e74429836bb6d upstream.
The sequencer FIFO management has a bug that may lead to a corruption
(shortage) of the cell linked list. When a sequencer client faces an
error at the event delivery, it tries to put back the dequeued cell.
When the first queue was put back, this forgot the tail pointer
tracking, and the link will be screwed up.
Although there is no memory corruption, the sequencer client may stall
forever at exit while flushing the pending FIFO cells in
snd_seq_pool_done(), as spotted by syzkaller.
This patch addresses the missing tail pointer tracking at
snd_seq_fifo_cell_putback(). Also the patch makes sure to clear the
cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar
mess-up of the FIFO linked list.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 28 Feb 2017 16:16:48 +0000 (17:16 +0100)]
ALSA: ctxfi: Fallback DMA mask to 32bit
commit
15c75b09f8d190f89ab4db463b87d411ca349dfe upstream.
Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit
architectures, and bails out if it fails. This causes a problem on
some platforms since the 64bit DMA isn't always guaranteed. We should
fall back to the default 32bit DMA when 64bit DMA fails.
Fixes:
6d74b86d3c0f ("ALSA: ctxfi - Allow 64bit DMA")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 28 Feb 2017 13:49:07 +0000 (14:49 +0100)]
ALSA: timer: Reject user params with too small ticks
commit
71321eb3f2d0df4e6c327e0b936eec4458a12054 upstream.
When a user sets a too small ticks with a fine-grained timer like
hrtimer, the kernel tries to fire up the timer irq too frequently.
This may lead to the condensed locks, eventually the kernel spinlock
lockup with warnings.
For avoiding such a situation, we define a lower limit of the
resolution, namely 1ms. When the user passes a too small tick value
that results in less than that, the kernel returns -EINVAL now.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaroslav Kysela [Wed, 15 Feb 2017 16:09:42 +0000 (17:09 +0100)]
ALSA: hda - fix Lewisburg audio issue
commit
e7480b34ad1ab84a63540b2c884cb92c0764ab74 upstream.
Like for Sunrise Point, the total stream number of Lewisburg's
input and output stream exceeds 15 (GCAP is 0x9701), which will
cause some streams do not work because of the overflow on
SDxCTL.STRM field if using the legacy stream tag allocation method.
Fixes:
5cf92c8b3dc5 ("ALSA: hda - Add Intel Lewisburg device IDs Audio")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Thu, 16 Feb 2017 07:26:54 +0000 (15:26 +0800)]
ALSA: hda/realtek - Cannot adjust speaker's volume on a Dell AIO
commit
9f1bc2c4c58fcb2d86e0e26437dc8f3a18ac3276 upstream.
The issue is the same as "
dd9aa335c880 ALSA: hda/realtek - Can't adjust
speaker's volume on a Dell AIO", the output requires to connect to a node
with Amp-out capability.
Applying the same fixup "ALC298_FIXUP_SPK_VOLUME" can fix the issue.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Belloni [Thu, 19 Jan 2017 22:05:39 +0000 (23:05 +0100)]
ARM: dts: at91: Enable DMA on sama5d2_xplained console
commit
78162d48466d23c45a784034630c5928af631e3d upstream.
Enable DMA on uart1 to get a more reliable console.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Belloni [Thu, 19 Jan 2017 00:46:58 +0000 (01:46 +0100)]
ARM: dts: at91: Enable DMA on sama5d4_xplained console
commit
ef8d02d4a2c36f7a93e74c95a9c419353b310117 upstream.
Enable DMA on usart3 to get a more reliable console. This is especially
useful for automation and kernelci were a kernel with PROVE_LOCKING enabled
is quite susceptible to character loss, resulting in tests failure.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Belloni [Tue, 25 Oct 2016 09:37:58 +0000 (11:37 +0200)]
ARM: at91: define LPDDR types
commit
e3f0a4017c2143b4b813df6a93e8cf79e3f76936 upstream.
The Atmel MPDDR controller support LPDDR2 and LPDDR3 memories, add their
types.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Sun, 8 Jan 2017 01:08:49 +0000 (23:08 -0200)]
media: fix dm1105.c build error
commit
e3bb3cddd177550d63a3e4909cf1a7782f13414d upstream.
Fix dm1105 build error when CONFIG_I2C_ALGOBIT=m and
CONFIG_DVB_DM1105=y.
drivers/built-in.o: In function `dm1105_probe':
dm1105.c:(.text+0x2836e7): undefined reference to `i2c_bit_add_bus'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guennadi Liakhovetski [Mon, 12 Dec 2016 11:16:51 +0000 (09:16 -0200)]
uvcvideo: Fix a wrong macro
commit
17c341ec0115837a610b2da15e32546e26068234 upstream.
Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes.
Fixes:
6998b6fb4b1c ("[media] uvcvideo: Use videobuf2-vmalloc")
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Iooss [Tue, 27 Dec 2016 18:02:36 +0000 (16:02 -0200)]
am437x-vpfe: always assign bpp variable
commit
6ebf75774f823ddbdbd10921006989d4df222f4a upstream.
In vpfe_s_fmt(), when the sensor format and the requested format were
the same, bpp was assigned to vpfe->bpp without being initialized first.
Grab the bpp value that is currently used by using __vpfe_get_format()
instead of its wrapper, vpfe_try_fmt().
This use of uninitialized variable has been found by compiling the
kernel with clang.
Fixes:
417d2e507edc ("[media] media: platform: add VPFE capture driver
support for AM437X")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Mon, 7 Nov 2016 15:07:07 +0000 (15:07 +0000)]
MIPS: Handle microMIPS jumps in the same way as MIPS32/MIPS64 jumps
commit
096a0de427ea333f56f0ee00328cff2a2731bcf1 upstream.
is_jump_ins() checks for plain jump ("j") instructions since commit
e7438c4b893e ("MIPS: Fix sibling call handling in get_frame_info") but
that commit didn't make the same change to the microMIPS code, leaving
it inconsistent with the MIPS32/MIPS64 code. Handle the microMIPS
encoding of the jump instruction too such that it behaves consistently.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes:
e7438c4b893e ("MIPS: Fix sibling call handling in get_frame_info")
Cc: Tony Wu <tung7970@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14533/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Mon, 7 Nov 2016 15:07:06 +0000 (15:07 +0000)]
MIPS: Calculate microMIPS ra properly when unwinding the stack
commit
bb9bc4689b9c635714fbcd5d335bad9934a7ebfc upstream.
get_frame_info() calculates the offset of the return address within a
stack frame simply by dividing a the bottom 16 bits of the instruction,
treated as a signed integer, by the size of a long. Whilst this works
for MIPS32 & MIPS64 ISAs where the sw or sd instructions are used, it's
incorrect for microMIPS where encodings differ. The result is that we
typically completely fail to unwind the stack on microMIPS.
Fix this by adjusting is_ra_save_ins() to calculate the return address
offset, and take into account the various different encodings there in
the same place as we consider whether an instruction is storing the
ra/$31 register.
With this we are now able to unwind the stack for kernels targetting the
microMIPS ISA, for example we can produce:
Call Trace:
[<
80109e1f>] show_stack+0x63/0x7c
[<
8011ea17>] __warn+0x9b/0xac
[<
8011ea45>] warn_slowpath_fmt+0x1d/0x20
[<
8013fe53>] register_console+0x43/0x314
[<
8067c58d>] of_setup_earlycon+0x1dd/0x1ec
[<
8067f63f>] early_init_dt_scan_chosen_stdout+0xe7/0xf8
[<
8066c115>] do_early_param+0x75/0xac
[<
801302f9>] parse_args+0x1dd/0x308
[<
8066c459>] parse_early_options+0x25/0x28
[<
8066c48b>] parse_early_param+0x2f/0x38
[<
8066e8cf>] setup_arch+0x113/0x488
[<
8066c4f3>] start_kernel+0x57/0x328
---[ end trace
0000000000000000 ]---
Whereas previously we only produced:
Call Trace:
[<
80109e1f>] show_stack+0x63/0x7c
---[ end trace
0000000000000000 ]---
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes:
34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14532/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Mon, 7 Nov 2016 15:07:05 +0000 (15:07 +0000)]
MIPS: Fix is_jump_ins() handling of 16b microMIPS instructions
commit
67c75057709a6d85c681c78b9b2f9b71191f01a2 upstream.
is_jump_ins() checks 16b instruction fields without verifying that the
instruction is indeed 16b, as is done by is_ra_save_ins() &
is_sp_move_ins(). Add the appropriate check.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes:
34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Mon, 7 Nov 2016 15:07:04 +0000 (15:07 +0000)]
MIPS: Fix get_frame_info() handling of microMIPS function size
commit
b6c7a324df37bf05ef7a2c1580683cf10d082d97 upstream.
get_frame_info() is meant to iterate over up to the first 128
instructions within a function, but for microMIPS kernels it will not
reach that many instructions unless the function is 512 bytes long since
we calculate the maximum number of instructions to check by dividing the
function length by the 4 byte size of a union mips_instruction. In
microMIPS kernels this won't do since instructions are variable length.
Fix this by instead checking whether the pointer to the current
instruction has reached the end of the function, and use max_insns as a
simple constant to check the number of iterations against.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes:
34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14530/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Mon, 7 Nov 2016 15:07:03 +0000 (15:07 +0000)]
MIPS: Prevent unaligned accesses during stack unwinding
commit
a3552dace7d1d0cabf573e88fc3025cb90c4a601 upstream.
During stack unwinding we call a number of functions to determine what
type of instruction we're looking at. The union mips_instruction pointer
provided to them may be pointing at a 2 byte, but not 4 byte, aligned
address & we thus cannot directly access the 4 byte wide members of the
union mips_instruction. To avoid this is_ra_save_ins() copies the
required half-words of the microMIPS instruction to a correctly aligned
union mips_instruction on the stack, which it can then access safely.
The is_jump_ins() & is_sp_move_ins() functions do not correctly perform
this temporary copy, and instead attempt to directly dereference 4 byte
fields which may be misaligned and lead to an address exception.
Fix this by copying the instruction halfwords to a temporary union
mips_instruction in get_frame_info() such that we can provide a 4 byte
aligned union mips_instruction to the is_*_ins() functions and they do
not need to deal with misalignment themselves.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes:
34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Mon, 7 Nov 2016 15:07:02 +0000 (15:07 +0000)]
MIPS: Clear ISA bit correctly in get_frame_info()
commit
ccaf7caf2c73c6db920772bf08bf1d47b2170634 upstream.
get_frame_info() can be called in microMIPS kernels with the ISA bit
already clear. For example this happens when unwind_stack_by_address()
is called because we begin with a PC that has the ISA bit set & subtract
the (odd) offset from the preceding symbol (which does not have the ISA
bit set). Since get_frame_info() unconditionally subtracts 1 from the PC
in microMIPS kernels it incorrectly misaligns the address it then
attempts to access code at, leading to an address error exception.
Fix this by using msk_isa16_mode() to clear the ISA bit, which allows
get_frame_info() to function regardless of whether it is provided with a
PC that has the ISA bit set or not.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes:
34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14528/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Fietkau [Thu, 19 Jan 2017 13:20:09 +0000 (14:20 +0100)]
MIPS: Lantiq: Keep ethernet enabled during boot
commit
774f0c6419bb8f9d83901d33582c7fe3ba6a6cb3 upstream.
Disabling ethernet during reboot (only to enable it again when the
ethernet driver attaches) can put the chip into a faulty state where it
corrupts the header of all incoming packets.
This happens if packets arrive during the time window where the core is
disabled, and it can be easily reproduced by rebooting while sending a
flood ping to the broadcast address.
Fixes:
95135bfa7ead ("MIPS: Lantiq: Deactivate most of the devices by default")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: John Crispin <john@phrozen.org>
Cc: hauke.mehrtens@lantiq.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15078/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Cowgill [Mon, 9 Jan 2017 16:52:28 +0000 (16:52 +0000)]
MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
commit
884b426917e4b3c85f33b382c792a94305dfdd62 upstream.
If copy_from_user is called with a large buffer (>= 128 bytes) and the
userspace buffer refers partially to unreadable memory, then it is
possible for Octeon's copy_from_user to report the wrong number of bytes
have been copied. In the case where the buffer size is an exact multiple
of 128 and the fault occurs in the last 64 bytes, copy_from_user will
report that all the bytes were copied successfully but leave some
garbage in the destination buffer.
The bug is in the main __copy_user_common loop in octeon-memcpy.S where
in the middle of the loop, src and dst are incremented by 128 bytes. The
l_exc_copy fault handler is used after this but that assumes that
"src < THREAD_BUADDR($28)". This is not the case if src has already been
incremented.
Fix by adding an extra fault handler which rewinds the src and dst
pointers 128 bytes before falling though to l_exc_copy.
Thanks to the pwritev test from the strace test suite for originally
highlighting this bug!
Fixes:
5b3b16880f40 ("MIPS: Add Cavium OCTEON processor support ...")
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14978/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mirko Parthey [Wed, 15 Feb 2017 22:31:30 +0000 (23:31 +0100)]
MIPS: BCM47XX: Fix button inversion for Asus WL-500W
commit
bdfdaf1a016ef09cb941f2edad485a713510b8d5 upstream.
The Asus WL-500W buttons are active high, but the software treats them
as active low. Fix the inverted logic.
Fixes:
3be972556fa1 ("MIPS: BCM47XX: Import buttons database from OpenWrt")
Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15295/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ralf Baechle [Thu, 26 Jan 2017 01:16:47 +0000 (02:16 +0100)]
MIPS: Fix special case in 64 bit IP checksumming.
commit
66fd848cadaa6be974a8c780fbeb328f0af4d3bd upstream.
For certain arguments such as saddr = 0xc0a8fd60, daddr = 0xc0a8fda1,
len = 80, proto = 17, sum = 0x7eae049d there will be a carry when
folding the intermediate 64 bit checksum to 32 bit but the code doesn't
add the carry back to the one's complement sum, thus an incorrect result
will be generated.
Reported-by: Mark Zhang <bomb.zhang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Fri, 16 Sep 2016 21:53:52 +0000 (15:53 -0600)]
samples: move mic/mpssd example code from Documentation
commit
6bee835dd54e279f3d3ae2eca92a9c394b4fd028 upstream.
Move mic/mpssd examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build mic/mpssd. It can be built
from top level directory or from mic/mpssd directory:
Run make -C samples/mic/mpssd or cd samples/mic/mpssd; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
[backported to 4.4-stable as this code is broken on newer versions of
gcc and we don't want to break the build for a Documentation sample.
- gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martijn Coenen [Fri, 30 Sep 2016 14:40:04 +0000 (16:40 +0200)]
android: binder: move global binder state into context struct.
This change moves all global binder state into
the context struct, thereby completely separating
the state and the locks between two different contexts.
The debugfs entries remain global, printing entries
from all contexts.
Change-Id: If8e3e2bece7bc6f974b66fbcf1d91d529ffa62f0
Signed-off-by: Martijn Coenen <maco@google.com>
Martijn Coenen [Tue, 7 Mar 2017 14:54:56 +0000 (15:54 +0100)]
android: binder: add padding to binder_fd_array_object.
binder_fd_array_object starts with a 4-byte header,
followed by a few fields that are 8 bytes when
ANDROID_BINDER_IPC_32BIT=N.
This can cause alignment issues in a 64-bit kernel
with a 32-bit userspace, as on x86_32 an 8-byte primitive
may be aligned to a 4-byte address. Pad with a __u32
to fix this.
Change-Id: I4374ed2cc3ccd3c6a1474cb7209b53ebfd91077b
Signed-off-by: Martijn Coenen <maco@android.com>
Martijn Coenen [Tue, 7 Mar 2017 14:51:18 +0000 (15:51 +0100)]
binder: use group leader instead of open thread
The binder allocator assumes that the thread that
called binder_open will never die for the lifetime of
that proc. That thread is normally the group_leader,
however it may not be. Use the group_leader instead
of current.
Bug:
35707103
Test: Created test case to open with temporary thread
Change-Id: Id693f74b3591f3524a8c6e9508e70f3e5a80c588
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Subash Abhinov Kasiviswanathan [Wed, 2 Nov 2016 17:56:40 +0000 (11:56 -0600)]
nf: IDLETIMER: Use fullsock when querying uid
sock_i_uid() acquires the sk_callback_lock which does not exist for
sockets in TCP_NEW_SYN_RECV state. This results in errors showing up
as spinlock bad magic. Fix this by looking for the full sock as
suggested by Eric.
Callstack for reference -
-003|rwlock_bug
-004|arch_read_lock
-004|do_raw_read_lock
-005|raw_read_lock_bh
-006|sock_i_uid
-007|from_kuid_munged(inline)
-007|reset_timer
-008|idletimer_tg_target
-009|ipt_do_table
-010|iptable_mangle_hook
-011|nf_iterate
-012|nf_hook_slow
-013|NF_HOOK_COND(inline)
-013|ip_output
-014|ip_local_out
-015|ip_build_and_send_pkt
-016|tcp_v4_send_synack
-017|atomic_sub_return(inline)
-017|reqsk_put(inline)
-017|tcp_conn_request
-018|tcp_v4_conn_request
-019|tcp_rcv_state_process
-020|tcp_v4_do_rcv
-021|tcp_v4_rcv
-022|ip_local_deliver_finish
-023|NF_HOOK_THRESH(inline)
-023|NF_HOOK(inline)
-023|ip_local_deliver
-024|ip_rcv_finish
-025|NF_HOOK_THRESH(inline)
-025|NF_HOOK(inline)
-025|ip_rcv
-026|deliver_skb(inline)
-026|deliver_ptype_list_skb(inline)
-026|__netif_receive_skb_core
-027|__netif_receive_skb
-028|netif_receive_skb_internal
-029|netif_receive_skb
Change-Id: Ic8f3a3d2d7af31434d1163b03971994e2125d552
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Eric Dumazet <edumazet@google.com>
Subash Abhinov Kasiviswanathan [Fri, 11 Nov 2016 02:36:15 +0000 (19:36 -0700)]
nf: IDLETIMER: Fix use after free condition during work
schedule_work(&timer->work) appears to be called after
cancel_work_sync(&info->timer->work) is completed.
Work can be scheduled from the PM_POST_SUSPEND notification event
even after cancel_work_sync is called.
Call stack
-004|notify_netlink_uevent(
| [X19] timer = 0xFFFFFFC0A5DFC780 -> (
| ...
| [NSD:0xFFFFFFC0A5DFC800] kobj = 0x6B6B6B6B6B6B6B6B,
| [NSD:0xFFFFFFC0A5DFC868] timeout = 0x6B6B6B6B,
| [NSD:0xFFFFFFC0A5DFC86C] refcnt = 0x6B6B6B6B,
| [NSD:0xFFFFFFC0A5DFC870] work_pending = 0x6B,
| [NSD:0xFFFFFFC0A5DFC871] send_nl_msg = 0x6B,
| [NSD:0xFFFFFFC0A5DFC872] active = 0x6B,
| [NSD:0xFFFFFFC0A5DFC874] uid = 0x6B6B6B6B,
| [NSD:0xFFFFFFC0A5DFC878] suspend_time_valid = 0x6B))
-005|idletimer_tg_work(
-006|__read_once_size(inline)
-006|static_key_count(inline)
-006|static_key_false(inline)
-006|trace_workqueue_execute_end(inline)
-006|process_one_work(
-007|worker_thread(
-008|kthread(
-009|ret_from_fork(asm)
---|end of frame
Force any pending idletimer_tg_work() to complete before freeing
the associated work struct and after unregistering to the pm_notifier
callback.
Change-Id: I4c5f0a1c142f7d698c092cf7bcafdb0f9fbaa9c1
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Todd Kjos [Thu, 2 Mar 2017 21:53:48 +0000 (13:53 -0800)]
Merge branch 'upstream-linux-4.4.y' into android-4.4
Greg Hackmann [Mon, 14 Nov 2016 17:48:02 +0000 (09:48 -0800)]
ANDROID: dm: android-verity: fix table_make_digest() error handling
If table_make_digest() fails, verify_verity_signature() would try to
pass the returned ERR_PTR() to kfree().
This fixes the smatch error:
drivers/md/dm-android-verity.c:601 verify_verity_signature() error: 'pks' dereferencing possible ERR_PTR()
Change-Id: I9b9b7764b538cb4a5f94337660e9b0f149b139be
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Anson Jacob [Thu, 17 Nov 2016 07:32:40 +0000 (02:32 -0500)]
ANDROID: usb: gadget: function: Fix commenting style
Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Change-Id: I9c92f128fdb3aeeb6ab9c7039e11f857bebb9539
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>