OSDN Git Service
Dave Airlie [Tue, 26 Jul 2016 07:26:29 +0000 (17:26 +1000)]
Backmerge tag 'v4.7' into drm-next
Linux 4.7
As requested by Daniel Vetter as the conflicts were getting messy.
Linus Torvalds [Sun, 24 Jul 2016 19:23:50 +0000 (12:23 -0700)]
Linux 4.7
Linus Torvalds [Sun, 24 Jul 2016 01:00:31 +0000 (10:00 +0900)]
Merge tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a long-standing bug in the incremental osdmap handling code
that caused misdirected requests, tagged for stable"
The tag is signed with a brand new key - Sage is on vacation and I
didn't anticipate this"
* tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client:
libceph: apply new_state before new_up_client on incrementals
Linus Torvalds [Sat, 23 Jul 2016 06:44:31 +0000 (15:44 +0900)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix memory leak in nftables, from Liping Zhang.
2) Need to check result of vlan_insert_tag() in batman-adv otherwise we
risk NULL skb derefs, from Sven Eckelmann.
3) Check for dev_alloc_skb() failures in cfg80211, from Gregory
Greenman.
4) Handle properly when we have ppp_unregister_channel() happening in
parallel with ppp_connect_channel(), from WANG Cong.
5) Fix DCCP deadlock, from Eric Dumazet.
6) Bail out properly in UDP if sk_filter() truncates the packet to be
smaller than even the space that the protocol headers need. From
Michal Kubecek.
7) Similarly for rose, dccp, and sctp, from Willem de Bruijn.
8) Make TCP challenge ACKs less predictable, from Eric Dumazet.
9) Fix infinite loop in bgmac_dma_tx_add() from Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
packet: propagate sock_cmsg_send() error
net/mlx5e: Fix del vxlan port command buffer memset
packet: fix second argument of sock_tx_timestamp()
net: switchdev: change ageing_time type to clock_t
Update maintainer for EHEA driver.
net/mlx4_en: Add resilience in low memory systems
net/mlx4_en: Move filters cleanup to a proper location
sctp: load transport header after sk_filter
net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int
net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata
net: nb8800: Fix SKB leak in nb8800_receive()
et131x: Fix logical vs bitwise check in et131x_tx_timeout()
vlan: use a valid default mtu value for vlan over macsec
net: bgmac: Fix infinite loop in bgmac_dma_tx_add()
mlxsw: spectrum: Prevent invalid ingress buffer mapping
mlxsw: spectrum: Prevent overwrite of DCB capability fields
mlxsw: spectrum: Don't emit errors when PFC is disabled
mlxsw: spectrum: Indicate support for autonegotiation
mlxsw: spectrum: Force link training according to admin state
r8152: add MODULE_VERSION
...
Linus Torvalds [Sat, 23 Jul 2016 05:25:02 +0000 (14:25 +0900)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This contains a fix for a potential crash/corruption issue and another
where the suid/sgid bits weren't cleared on write"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: verify upper dentry in ovl_remove_and_whiteout()
ovl: Copy up underlying inode's ->i_mode to overlay inode
ovl: handle ATTR_KILL*
Linus Torvalds [Sat, 23 Jul 2016 03:54:20 +0000 (12:54 +0900)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Five fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
pps: do not crash when failed to register
tools/vm/slabinfo: fix an unintentional printf
testing/radix-tree: fix a macro expansion bug
radix-tree: fix radix_tree_iter_retry() for tagged iterators.
mm: memcontrol: fix cgroup creation failure after many small jobs
Linus Torvalds [Sat, 23 Jul 2016 03:51:52 +0000 (12:51 +0900)]
Merge tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git://people.freedesktop.org/~airlied/linux
Pull intel kabylake drm fixes from Dave Airlie:
"As mentioned Intel has gathered all the Kabylake fixes from -next,
which we've enabled in 4.7 for the first time, these are pretty much
limited in scope to only affects kabylake, which is hw that isn't
shipping yet. So I'm mostly okay with it going in now.
If we don't land this, it might be a good idea to disable kabylake
support in 4.7 before we ship"
* tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git://people.freedesktop.org/~airlied/linux: (28 commits)
drm/i915/kbl: Introduce the first official DMC for Kabylake.
drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.
drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate
drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance
drm/i195/fbc: Add WaFbcNukeOnHostModify
drm/i915/gen9: Add WaFbcWakeMemOn
drm/i915/gen9: Add WaFbcTurnOffFbcWatermark
drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch
drm/i915/gen9: Add WaEnableChickenDCPR
drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing
drm/i915/kbl: Add WaDisableGafsUnitClkGating
drm/i915/kbl: Add WaForGAMHang
drm/i915: Add WaInsertDummyPushConstP for bxt and kbl
drm/i915/kbl: Add WaDisableDynamicCreditSharing
drm/i915/kbl: Add WaDisableGamClockGating
drm/i915/gen9: Enable must set chicken bits in config0 reg
drm/i915/kbl: Add WaDisableLSQCROPERFforOCL
drm/i915/kbl: Add WaDisableSDEUnitClockGating
drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0
drm/i915/kbl: Add WaEnableGapsTsvCreditFix
...
Linus Torvalds [Sat, 23 Jul 2016 03:46:42 +0000 (12:46 +0900)]
Merge tag 'drm-fixes-for-v4.7-rc8-intel' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Two i915 regression fixes.
Intel have submitted some Kabylake fixes I'll send separately, since
this is the first kernel with kabylake support and they don't go much
outside that area I think they should be fine"
* tag 'drm-fixes-for-v4.7-rc8-intel' of git://people.freedesktop.org/~airlied/linux:
drm/i915: add missing condition for committing planes on crtc
drm/i915: Treat eDP as always connected, again
Linus Torvalds [Sat, 23 Jul 2016 03:39:08 +0000 (12:39 +0900)]
Merge tag 'm68k-for-v4.8-tag1' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k upddates from Geert Uytterhoeven:
- assorted spelling fixes
- defconfig updates
* tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.7-rc2
m68k: Assorted spelling fixes
Linus Torvalds [Sat, 23 Jul 2016 03:32:50 +0000 (12:32 +0900)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes before final release:
Marvell Armada:
- One to fix a typo in the devicetree specifying memory ranges for
the crypto engine
- Two to deal with marking PCI and device-memory as strongly ordered
to avoid hardware deadlocks, in particular when enabling above
crypto driver.
- Compile fix for PM
Allwinner:
- DT clock fixes to deal with u-boot-enabled framebuffer (simplefb).
- Make R8 (C.H.I.P. SoC) inherit system compatibility from A13 to
make clocks register proper.
Tegra:
- Fix SD card voltage setting on the Tegra3 Beaver dev board
Misc:
- Two maintainers updates for STM32 and STi platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: beaver: Allow SD card voltage to be changed
MAINTAINERS: update STi maintainer list
MAINTAINERS: update STM32 maintainers list
ARM: mvebu: compile pm code conditionally
ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock
ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists
ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys
ARM: mvebu: map PCI I/O regions strongly ordered
ARM: mvebu: fix HW I/O coherency related deadlocks
ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
Linus Torvalds [Sat, 23 Jul 2016 03:20:55 +0000 (12:20 +0900)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a sporadic build failure in the qat driver as well as a
memory corruption bug in rsa-pkcs1pad"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
crypto: qat - make qat_asym_algs.o depend on asn1 headers
Linus Torvalds [Sat, 23 Jul 2016 03:15:48 +0000 (12:15 +0900)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull key handling fixes from James Morris:
"Quoting David Howells:
Here are three miscellaneous fixes:
(1) Fix a panic in some debugging code in PKCS#7. This can only
happen by explicitly inserting a #define DEBUG into the code.
(2) Fix the calculation of the digest length in the PE file parser.
This causes a failure where there should be a success.
(3) Fix the case where an X.509 cert can be added as an asymmetric key
to a trusted keyring with no trust restriction if no AKID is
supplied.
Bugs (1) and (2) aren't particularly problematic, but (3) allows a
security check to be bypassed. Happily, this is a recent regression
and never made it into a released kernel"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
KEYS: Fix for erroneous trust of incorrectly signed X.509 certs
pefile: Fix the failure of calculation for digest
PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined
Linus Torvalds [Sat, 23 Jul 2016 03:10:48 +0000 (12:10 +0900)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A few more fixes for the input subsystem:
- restore naming for tsc2005 touchscreens as some userspace match on it
- fix out of bound access in legacy keyboard driver
- fixup in RMI4 driver
Everything is tagged for stable as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: tsc200x - report proper input_dev name
tty/vt/keyboard: fix OOB access in do_compute_shiftstate()
Input: synaptics-rmi4 - fix maximum size check for F12 control register 8
Linus Torvalds [Sat, 23 Jul 2016 03:07:37 +0000 (12:07 +0900)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"This contains a regression fix for a problem that was introduced in
v4.7-rc6.
In 4.7-rc1 we introduced auto-probing for the ACPI DSM (device-
specific-method) format that the platform firmware implements for
nvdimm devices. We initially fixed a regression in probing the QEMU
DSM implementation by making acpi_check_dsm() tolerant of the way QEMU
reports the "0 DSMs supported" condition.
However, that broke HPE platforms since that tolerance caused the
driver to mistakenly match the 1-zero-byte response those platforms
give to "unknown" commands. Instead, we simply make the driver
tolerant of not finding any supported DSMs. This has been tested to
work with both QEMU and HPE platforms.
This commit has appeared in a -next release with no reported issues"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: make DIMM DSMs optional
Linus Torvalds [Sat, 23 Jul 2016 03:03:21 +0000 (12:03 +0900)]
Merge tag 'gpio-v4.7-6' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"Compile problem fix for Tegra,
Sorry to send this in the last minute but Ingo says this build failure
is very prominent so I'm not going to wait for v4.7 before sending it.
It is a case of COMPILE_TEST causing more problems than it solves and
I'm already swearing about me shooting myself in the foot with that
gun :("
* tag 'gpio-v4.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: tegra: don't auto-enable for COMPILE_TEST
Linus Torvalds [Sat, 23 Jul 2016 02:55:20 +0000 (11:55 +0900)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Michael Turquette:
"Fix a bug in the at91 clk driver, two compile time warnings in sunxi
clk drivers, and one bug in a sunxi clk driver introduced in the 4.7
merge window"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: at91: fix clk_programmable_set_parent()
clk: sunxi: remove unused variable
clk: sunxi: display: Add per-clock flags
clk: sunxi: tcon-ch1: Do not return a negative error in get_parent
Linus Torvalds [Sat, 23 Jul 2016 02:46:59 +0000 (11:46 +0900)]
Merge branch 'for-4.7-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fix from Tejun Heo:
"Another fallout from max_sectors bump a couple years ago. The lite-on
optical drive times out on large requests"
* 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: LITE-ON CX1-JB256-HP needs lower max_sectors
Linus Torvalds [Sat, 23 Jul 2016 02:43:17 +0000 (11:43 +0900)]
Merge tag 'mmc-v4.7-rc7' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are a few late mmc fixes intended for v4.7 final.
MMC core:
- Fix eMMC packed command header endianness
- Fix free of uninitialized buffer for mmc ioctl
MMC host:
- pxamci: Fix potential oops in ->probe()"
* tag 'mmc-v4.7-rc7' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: pxamci: fix potential oops
mmc: block: fix packed command header endianness
mmc: block: fix free of uninitialized 'idata->buf'
Linus Torvalds [Sat, 23 Jul 2016 02:28:06 +0000 (11:28 +0900)]
Merge tag 'sound-4.7-fix2' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No surprise, just a few small fixes: a couple of changes are seen in
the core part, and both of them are rather for unusual error paths.
The rest are the regular HD-audio fixes and one USB-audio regression
fix"
* tag 'sound-4.7-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix quirks code is not called
ALSA: hda: add AMD Stoney PCI ID with proper driver caps
ALSA: hda - fix use-after-free after module unload
ALSA: pcm: Free chmap at PCM free callback, too
ALSA: ctl: Stop notification after disconnection
ALSA: hda/realtek - add new pin definition in alc225 pin quirk table
Linus Torvalds [Sat, 23 Jul 2016 02:22:37 +0000 (11:22 +0900)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull NVMe fix from Jens Axboe:
"Late addition here, it's basically a revert of a patch that was added
in this merge window, but has proven to cause problems.
This is swapping out the RCU based namespace protection with a good
old mutex instead"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: Remove RCU namespace protection
Jiri Slaby [Wed, 20 Jul 2016 22:45:08 +0000 (15:45 -0700)]
pps: do not crash when failed to register
With this command sequence:
modprobe plip
modprobe pps_parport
rmmod pps_parport
the partport_pps modules causes this crash:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: parport_detach+0x1d/0x60 [pps_parport]
Oops: 0000 [#1] SMP
...
Call Trace:
parport_unregister_driver+0x65/0xc0 [parport]
SyS_delete_module+0x187/0x210
The sequence that builds up to this is:
1) plip is loaded and takes the parport device for exclusive use:
plip0: Parallel port at 0x378, using IRQ 7.
2) pps_parport then fails to grab the device:
pps_parport: parallel port PPS client
parport0: cannot grant exclusive access for device pps_parport
pps_parport: couldn't register with parport0
3) rmmod of pps_parport is then killed because it tries to access
pardev->name, but pardev (taken from port->cad) is NULL.
So add a check for NULL in the test there too.
Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 20 Jul 2016 22:45:05 +0000 (15:45 -0700)]
tools/vm/slabinfo: fix an unintentional printf
The curly braces are missing here so we print stuff unintentionally.
Fixes:
9da4714a2d44 ('slub: slabinfo update for cmpxchg handling')
Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 20 Jul 2016 22:45:03 +0000 (15:45 -0700)]
testing/radix-tree: fix a macro expansion bug
There are no parentheses around this macro and it causes a problem when
we do:
index = rand() % THRASH_SIZE;
Link: http://lkml.kernel.org/r/20160715210953.GC19522@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Wed, 20 Jul 2016 22:45:00 +0000 (15:45 -0700)]
radix-tree: fix radix_tree_iter_retry() for tagged iterators.
radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags.
Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot()
leading to crash:
RIP: radix_tree_next_slot include/linux/radix-tree.h:473
find_get_pages_tag+0x334/0x930 mm/filemap.c:1452
....
Call Trace:
pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960
mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516
ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736
do_writepages+0x97/0x100 mm/page-writeback.c:2364
__filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300
filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490
ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115
vfs_fsync_range+0x10a/0x250 fs/sync.c:195
vfs_fsync fs/sync.c:209
do_fsync+0x42/0x70 fs/sync.c:219
SYSC_fdatasync fs/sync.c:232
SyS_fdatasync+0x19/0x20 fs/sync.c:230
entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207
We must reset iterator's tags to bail out from radix_tree_next_slot()
and go to the slow-path in radix_tree_next_chunk().
Fixes:
46437f9a554f ("radix-tree: fix race in gang lookup")
Link: http://lkml.kernel.org/r/1468495196-10604-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jul 2016 22:44:57 +0000 (15:44 -0700)]
mm: memcontrol: fix cgroup creation failure after many small jobs
The memory controller has quite a bit of state that usually outlives the
cgroup and pins its CSS until said state disappears. At the same time
it imposes a 16-bit limit on the CSS ID space to economically store IDs
in the wild. Consequently, when we use cgroups to contain frequent but
small and short-lived jobs that leave behind some page cache, we quickly
run into the 64k limitations of outstanding CSSs. Creating a new cgroup
fails with -ENOSPC while there are only a few, or even no user-visible
cgroups in existence.
Although pinning CSSs past cgroup removal is common, there are only two
instances that actually need an ID after a cgroup is deleted: cache
shadow entries and swapout records.
Cache shadow entries reference the ID weakly and can deal with the CSS
having disappeared when it's looked up later. They pose no hurdle.
Swap-out records do need to pin the css to hierarchically attribute
swapins after the cgroup has been deleted; though the only pages that
remain swapped out after offlining are tmpfs/shmem pages. And those
references are under the user's control, so they are manageable.
This patch introduces a private 16-bit memcg ID and switches swap and
cache shadow entries over to using that. This ID can then be recycled
after offlining when the CSS remains pinned only by objects that don't
specifically need it.
This script demonstrates the problem by faulting one cache page in a new
cgroup and deleting it again:
set -e
mkdir -p pages
for x in `seq 128000`; do
[ $((x % 1000)) -eq 0 ] && echo $x
mkdir /cgroup/foo
echo $$ >/cgroup/foo/cgroup.procs
echo trex >pages/$x
echo $$ >/cgroup/cgroup.procs
rmdir /cgroup/foo
done
When run on an unpatched kernel, we eventually run out of possible IDs
even though there are no visible cgroups:
[root@ham ~]# ./cssidstress.sh
[...]
65000
mkdir: cannot create directory '/cgroup/foo': No space left on device
After this patch, the IDs get released upon cgroup destruction and the
cache and css objects get released once memory reclaim kicks in.
[hannes@cmpxchg.org: init the IDR]
Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org
Fixes:
b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups")
Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: John Garcia <john.garcia@mesosphere.io>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Nikolay Borisov <kernel@kyup.com>
Cc: <stable@vger.kernel.org> [3.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Wed, 6 Jul 2016 12:54:03 +0000 (14:54 +0200)]
gpio: tegra: don't auto-enable for COMPILE_TEST
I stumbled over a build error with COMPILE_TEST and CONFIG_OF
disabled:
drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe':
drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node'
The problem is that the newly added GPIO_TEGRA Kconfig symbol
does not have a dependency on CONFIG_OF. However, there is another
problem here as the driver gets enabled unconditionally whenever
COMPILE_TEST is set.
This fixes both problems, by making the symbol user-visible
when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y.
As a side-effect, it is now possible to compile-test a Tegra
kernel with GPIO support disabled, which is harmless.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
4dd4dd1d2120 ("gpio: tegra: Allow compile test")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ilya Dryomov [Tue, 19 Jul 2016 01:50:28 +0000 (03:50 +0200)]
libceph: apply new_state before new_up_client on incrementals
Currently, osd_weight and osd_state fields are updated in the encoding
order. This is wrong, because an incremental map may look like e.g.
new_up_client: { osd=6, addr=... } # set osd_state and addr
new_state: { osd=6, xorstate=EXISTS } # clear osd_state
Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After
applying new_up_client, osd_state is changed to EXISTS | UP. Carrying
on with the new_state update, we flip EXISTS and leave osd6 in a weird
"!EXISTS but UP" state. A non-existent OSD is considered down by the
mapping code
2087 for (i = 0; i < pg->pg_temp.len; i++) {
2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) {
2089 if (ceph_can_shift_osds(pi))
2090 continue;
2091
2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE;
and so requests get directed to the second OSD in the set instead of
the first, resulting in OSD-side errors like:
[WRN] : client.4239 192.168.122.21:0/
2444980242 misdirected client.4239.1:2827 pg 2.
5df899f2 to osd.4 not [1,4,6] in e680/680
and hung rbds on the client:
[ 493.566367] rbd: rbd0: write 400000 at
11cc00000 (0)
[ 493.566805] rbd: rbd0: result -6 xferred 400000
[ 493.567011] blk_update_request: I/O error, dev rbd0, sector
9330688
The fix is to decouple application from the decoding and:
- apply new_weight first
- apply new_state before new_up_client
- twiddle osd_state flags if marking in
- clear out some of the state if osd is destroyed
Fixes: http://tracker.ceph.com/issues/14901
Cc: stable@vger.kernel.org # 3.15+: 6dd74e44dc1d: libceph: set 'exists' flag for newly up osd
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Herbert Xu [Fri, 22 Jul 2016 09:58:21 +0000 (17:58 +0800)]
crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
To allow for child request context the struct akcipher_request child_req
needs to be at the end of the structure.
Cc: stable@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Maxim Patlasov [Fri, 22 Jul 2016 01:24:26 +0000 (18:24 -0700)]
ovl: verify upper dentry in ovl_remove_and_whiteout()
The upper dentry may become stale before we call ovl_lock_rename_workdir.
For example, someone could (mistakenly or maliciously) manually unlink(2)
it directly from upperdir.
To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir
and and check if it matches the upper dentry.
Essentially, it is the same problem and similar solution as in
commit
11f3710417d0 ("ovl: verify upper dentry before unlink and rename").
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Soheil Hassas Yeganeh [Wed, 20 Jul 2016 22:01:18 +0000 (18:01 -0400)]
packet: propagate sock_cmsg_send() error
sock_cmsg_send() can return different error codes and not only
-EINVAL, and we should properly propagate them.
Fixes:
c14ac9451c34 ("sock: enable timestamping using control messages")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Fri, 22 Jul 2016 01:40:24 +0000 (11:40 +1000)]
Merge branch 'for-next' of git.agner.ch/git/linux-drm-fsl-dcu into drm-next
This adds drm bridge support for the NXP/Freescale DCU. The patchset
has been discussed on the mailing list since quite some time...
Plus there is a small fix provided by Peter.
* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: add support for drm bridge
drm/fsl-dcu: rework codes to support of_graph dt binding for panel
drm/fsl-dcu: add missing of_node_put after calling of_parse_phandle
Dave Airlie [Fri, 22 Jul 2016 01:39:31 +0000 (11:39 +1000)]
Merge branch 'drm-rockchip-next-fixes-2016-07-19' of https://github.com/markyzq/kernel-drm-rockchip into drm-next
Here are some little fixes for rockchip drm, looks good for me, and there is no doubt on them, So I'd like you can land them.
* 'drm-rockchip-next-fixes-2016-07-19' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: allocate correct crtc state structure on reset
drm/rockchip: Delete an unnecessary check before drm_gem_object_unreference_unlocked()
drm/rockchip: fix a couple off by one bugs
drm/rockchip: vop: correct rk3036 register define
drm/rockchip: vop: correct the source size of uv scale factor setting
drm/rockchip: vop: add uv_vir register field for RK3036 VOP
drm/rockchip: fix "should it be static?" warnings
drm/rockchip: fb: add missing header
drm/rockchip: dw_hdmi: remove unused #include
Jan Stancek [Thu, 30 Jun 2016 10:23:51 +0000 (12:23 +0200)]
crypto: qat - make qat_asym_algs.o depend on asn1 headers
Parallel build can sporadically fail because asn1 headers may
not be built yet by the time qat_asym_algs.o is compiled:
drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory
#include "qat_rsapubkey-asn1.h"
Cc: stable@vger.kernel.org
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Michael Welling [Wed, 20 Jul 2016 17:02:07 +0000 (10:02 -0700)]
Input: tsc200x - report proper input_dev name
Passes input_id struct to the common probe function for the tsc200x drivers
instead of just the bustype.
This allows for the use of the product variable to set the input_dev->name
variable according to the type of touchscreen used. Note that when we
introduced support for TSC2004 we started calling everything TSC200X, so
let's keep this quirk.
Signed-off-by: Michael Welling <mwelling@ieee.org>
Cc: stable@vger.kernel.org
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Mon, 27 Jun 2016 21:12:34 +0000 (14:12 -0700)]
tty/vt/keyboard: fix OOB access in do_compute_shiftstate()
The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS,
which is currently 256, whereas number of keys/buttons in input device (and
therefor in key_down) is much larger - KEY_CNT - 768, and that can cause
out-of-bound access when we do
sym = U(key_maps[0][k]);
with large 'k'.
To fix it we should not attempt iterating beyond smaller of NR_KEYS and
KEY_CNT.
Also while at it let's switch to for_each_set_bit() instead of open-coding
it.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Saeed Mahameed [Wed, 20 Jul 2016 21:39:53 +0000 (00:39 +0300)]
net/mlx5e: Fix del vxlan port command buffer memset
memset the command buffers rather than the pointers to them.
Fixes:
b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshihiro Shimoda [Tue, 19 Jul 2016 05:40:51 +0000 (14:40 +0900)]
packet: fix second argument of sock_tx_timestamp()
This patch fixes an issue that a syscall (e.g. sendto syscall) cannot
work correctly. Since the sendto syscall doesn't have msg_control buffer,
the sock_tx_timestamp() in packet_snd() cannot work correctly because
the socks.tsflags is set to 0.
So, this patch sets the socks.tsflags to sk->sk_tsflags as default.
Fixes:
c14ac9451c34 ("sock: enable timestamping using control messages")
Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Reported-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Duggan [Wed, 20 Jul 2016 00:53:59 +0000 (17:53 -0700)]
Input: synaptics-rmi4 - fix maximum size check for F12 control register 8
According to the RMI4 spec the maximum size of F12 control register 8 is
15 bytes. The current code incorrectly reports an error if control 8 is
greater then 14. Making sensors with a control register 8 with 15 bytes
unusable.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Chris Healy <cphealy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Vivien Didelot [Mon, 18 Jul 2016 19:02:06 +0000 (15:02 -0400)]
net: switchdev: change ageing_time type to clock_t
The switchdev value for the SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME
attribute is a clock_t and requires to use helpers such as
clock_t_to_jiffies() to convert to milliseconds.
Change ageing_time type from u32 to clock_t to make it explicit.
Fixes:
f55ac58ae64c ("switchdev: add bridge ageing_time attribute")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Douglas Miller [Mon, 18 Jul 2016 17:28:45 +0000 (12:28 -0500)]
Update maintainer for EHEA driver.
Since Thadeu left IBM, EHEA has gone mostly unmaintained, since his email
address doesn't work anymore. I'm stepping up to help maintain this
driver upstream.
I'm adding Thadeu's personal e-mail address in Cc, hoping that we can
get his ack.
CC: Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br>
Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 Jul 2016 23:44:12 +0000 (16:44 -0700)]
Merge branch 'mlx4-fixes'
Tariq Toukan says:
====================
Safe flow for mlx4_en configuration change
This patchset improves the mlx4_en driver resiliency, especially on
systems with low memory. Upon a configuration change that requires
the allocation of new resources, we first try to allocate, prior to
destroying the current ones. Once it is successfully done,
we release the old resources and attach the new ones. Otherwise, we
stay with a functioning interface having the same old configuration.
This improvement became of greater significance after removing the use
of vmap.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eugenia Emantayev [Mon, 18 Jul 2016 15:35:12 +0000 (18:35 +0300)]
net/mlx4_en: Add resilience in low memory systems
This patch fixes the lost of Ethernet port on low memory system,
when driver frees its resources and fails to allocate new resources.
Issue could happen while changing number of channels, rings size or
changing the timestamp configuration.
This fix is necessary because of removing vmap use in the code.
When vmap was in use driver could allocate non-contiguous memory
and make it contiguous with vmap. Now it could fail to allocate
a large chunk of contiguous memory and lose the port.
Current code tries to allocate new resources and then upon success
frees the old resources.
Fixes:
73898db04301 ('net/mlx4: Avoid wrong virtual mappings')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eugenia Emantayev [Mon, 18 Jul 2016 15:35:11 +0000 (18:35 +0300)]
net/mlx4_en: Move filters cleanup to a proper location
Filters cleanup should be done once before destroying net device,
since filters list is contained in the private data.
Fixes:
1eb8c695bda9 ('net/mlx4_en: Add accelerated RFS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Tue, 19 Jul 2016 19:32:39 +0000 (12:32 -0700)]
nfit: make DIMM DSMs optional
Commit
4995734e973a "acpi, nfit: fix acpi_check_dsm() vs zero functions
implemented" attempted to fix a QEMU regression by supporting its usage
of a zero-mask as a valid response to a DSM-family probe request.
However, this behavior breaks HP platforms that return a zero-mask by
default causing the probe to misidentify the DSM-family.
Instead, the QEMU regression can be fixed by simply not requiring the DSM
family to be identified.
This effectively reverts commit
4995734e973a, and removes the DSM
requirement from the init path.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Fixes:
4995734e973a ("acpi, nfit: fix acpi_check_dsm() vs zero functions implemented")
Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dave Airlie [Tue, 19 Jul 2016 08:00:15 +0000 (18:00 +1000)]
Merge tag 'topic/kbl-4.7-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel into drm-fixes
As promised here's the pile of kbl cherry-picks assembled by Mika&Rodrigo.
It's a bit much, but all well-contained to kbl code and been tested for a
while in drm-intel-next. Still separate in case too much, but in that case
I think we'd need to disable kbl by default again (which would be annoying
too) in 4.7.
* tag 'topic/kbl-4.7-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel: (28 commits)
drm/i915/kbl: Introduce the first official DMC for Kabylake.
drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.
drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate
drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance
drm/i195/fbc: Add WaFbcNukeOnHostModify
drm/i915/gen9: Add WaFbcWakeMemOn
drm/i915/gen9: Add WaFbcTurnOffFbcWatermark
drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch
drm/i915/gen9: Add WaEnableChickenDCPR
drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing
drm/i915/kbl: Add WaDisableGafsUnitClkGating
drm/i915/kbl: Add WaForGAMHang
drm/i915: Add WaInsertDummyPushConstP for bxt and kbl
drm/i915/kbl: Add WaDisableDynamicCreditSharing
drm/i915/kbl: Add WaDisableGamClockGating
drm/i915/gen9: Enable must set chicken bits in config0 reg
drm/i915/kbl: Add WaDisableLSQCROPERFforOCL
drm/i915/kbl: Add WaDisableSDEUnitClockGating
drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0
drm/i915/kbl: Add WaEnableGapsTsvCreditFix
...
Dave Airlie [Tue, 19 Jul 2016 07:51:19 +0000 (17:51 +1000)]
Merge branch 'drm_bridge_for_4.8' of https://github.com/boddob/linux into drm-next
This is an update to the previous drm bridge pull request. The ADV7511
driver's conversion from slave encoder to bridge meant that its users
(the rcar-du kms driver) should use the bridge interface too. This pull
request now also contains a commit that updates the rcar-du's hdmi encoder
interface from slave encoder to bridge.
The other updates are as before:
- Converts the ADV7511 i2c slave encoder driver to a bridge driver.
Adds support for the ADV7533 bridge chip.
- Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips.
* 'drm_bridge_for_4.8' of https://github.com/boddob/linux:
drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
drm/bridge: tc358767: Add DPI to eDP bridge driver
dt-bindings: tc358767: add DT documentation
dt-bindings: drm/bridge: Update bindings for ADV7533
drm/bridge: adv7533: Change number of DSI lanes dynamically
drm/bridge: adv7533: Use internal timing generator
drm/bridge: adv7533: Create a MIPI DSI device
drm/bridge: adv7533: Initial support for ADV7533
drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
drm/i2c: adv7511: Move to bridge folder
drm/i2c: adv7511: Convert to drm_bridge
Geert Uytterhoeven [Mon, 6 Jun 2016 07:43:00 +0000 (09:43 +0200)]
m68k/defconfig: Update defconfigs for v4.7-rc2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Dave Airlie [Tue, 19 Jul 2016 06:09:20 +0000 (16:09 +1000)]
Merge tag 'drm-intel-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Two more regression fixes for 4.7.
* tag 'drm-intel-fixes-2016-07-18' of git://anongit.freedesktop.org/drm-intel:
drm/i915: add missing condition for committing planes on crtc
drm/i915: Treat eDP as always connected, again
John Keeping [Thu, 14 Jul 2016 15:29:15 +0000 (16:29 +0100)]
drm/rockchip: allocate correct crtc state structure on reset
Because we are using a custom crtc_state structure, we must override the
reset helper to allocate the correct amount of memory.
Cc: stable@vger.kernel.org
Fixes:
4e257d9eee23 ("drm/rockchip: get rid of rockchip_drm_crtc_mode_config")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Willem de Bruijn [Sat, 16 Jul 2016 21:33:15 +0000 (17:33 -0400)]
sctp: load transport header after sk_filter
Do not cache pointers into the skb linear segment across sk_filter.
The function call can trigger pskb_expand_head.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khlebnikov [Sat, 16 Jul 2016 14:08:56 +0000 (17:08 +0300)]
net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int
In kernel HTB keeps tokens in signed 64-bit in nanoseconds. In netlink
protocol these values are converted into pshed ticks (64ns for now) and
truncated to 32-bit. In struct tc_htb_xstats fields "tokens" and "ctokens"
are declared as unsigned 32-bit but they could be negative thus tool 'tc'
prints them as signed. Big values loose higher bits and/or become negative.
This patch clamps tokens in xstat into range from INT_MIN to INT_MAX.
In this way it's easier to understand what's going on here.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Fri, 15 Jul 2016 13:23:22 +0000 (15:23 +0200)]
drm/rockchip: Delete an unnecessary check before drm_gem_object_unreference_unlocked()
The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Dan Carpenter [Wed, 13 Jul 2016 10:15:04 +0000 (13:15 +0300)]
drm/rockchip: fix a couple off by one bugs
The priv->crtc_funcs[] array has ROCKCHIP_MAX_CRTC elements so > should
be >= here.
Fixes:
2048e3286f34 ('drm: rockchip: Add basic drm driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Mark Yao [Thu, 14 Jul 2016 02:23:26 +0000 (10:23 +0800)]
drm/rockchip: vop: correct rk3036 register define
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reported-by: Tomasz Figa <tfiga@chromium.org>
Mark Yao [Mon, 6 Jun 2016 07:58:46 +0000 (15:58 +0800)]
drm/rockchip: vop: correct the source size of uv scale factor setting
When the input color format is YUV, we need to do some external scale
for CBCR. Like,
* In YUV420 data format:
cbcr_xscale = dst_w / src_w * 2;
cbcr_yscale = dst_h / src_h * 2;
* In YUV422 data format:
cbcr_xscale = dst_w / src_w * 2;
cbcr_yscale = dst_h / src_h;
* In YUV444 data format
cbcr_xscale = dst_w / src_w;
cbcr_yscale = dst_h / src_h;
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Yakir Yang [Mon, 6 Jun 2016 07:58:32 +0000 (15:58 +0800)]
drm/rockchip: vop: add uv_vir register field for RK3036 VOP
The WIN0 of RK3036 VOP could support YUV data format, but driver
forget to add the uv_vir register field for it.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
John Keeping [Tue, 10 May 2016 16:03:56 +0000 (17:03 +0100)]
drm/rockchip: fix "should it be static?" warnings
Combined with the previous commit, this fixes all of the sparse warnings
in drm/rockchip.
Signed-off-by: John Keeping <john@metanate.com>
John Keeping [Tue, 10 May 2016 16:03:55 +0000 (17:03 +0100)]
drm/rockchip: fb: add missing header
This fixes the following sparse warnings:
drivers/gpu/drm/rockchip/rockchip_drm_fb.c:32:23: warning: symbol 'rockchip_fb_get_gem_obj' was not declared. Should it be static?
drivers/gpu/drm/rockchip/rockchip_drm_fb.c:315:24: warning: symbol 'rockchip_drm_framebuffer_init' was not declared. Should it be static?
drivers/gpu/drm/rockchip/rockchip_drm_fb.c:329:6: warning: symbol 'rockchip_drm_mode_config_init' was not declared. Should it be static?
Signed-off-by: John Keeping <john@metanate.com>
John Keeping [Tue, 10 May 2016 16:03:54 +0000 (17:03 +0100)]
drm/rockchip: dw_hdmi: remove unused #include
drm_encoder_slave is not used in this file.
Signed-off-by: John Keeping <john@metanate.com>
Boris Brezillon [Mon, 18 Jul 2016 07:49:12 +0000 (09:49 +0200)]
clk: at91: fix clk_programmable_set_parent()
Since commit
1bdf02326b71e ("clk: at91: make use of syscon/regmap
internally"), clk_programmable_set_parent() is always selecting the
first parent (AKA slow_clk), no matter what's passed in the 'index'
parameter.
Fix that by initializing the pckr variable to the index value.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Hans Verkuil <hans.verkuil@cisco.com>
Fixes:
1bdf02326b71e ("clk: at91: make use of syscon/regmap internally")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/
1468828152-18389-1-git-send-email-boris.brezillon@free-electrons.com
Tejun Heo [Mon, 18 Jul 2016 22:40:00 +0000 (18:40 -0400)]
libata: LITE-ON CX1-JB256-HP needs lower max_sectors
Since
34b48db66e08 ("block: remove artifical max_hw_sectors cap"),
max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON
CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to
the previous value.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: dgerasimov@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671
Cc: stable@vger.kernel.org # v3.19+
Fixes:
34b48db66e08 ("block: remove artifical max_hw_sectors cap")
Signed-off-by: Tejun Heo <tj@kernel.org>
Rodrigo Vivi [Tue, 26 Apr 2016 21:59:51 +0000 (14:59 -0700)]
drm/i915/kbl: Introduce the first official DMC for Kabylake.
Version 1.01.
This firmware is made for Kabylake platform so it doesn't
need the stepping workaround that we had before.
v2: Rebased on top of latest nightly with min version
required change.
v3: With right CSR_VERSION (Patrik).
Cc: Christophe Prigent <christophe.prigent@intel.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461707991-15336-1-git-send-email-rodrigo.vivi@intel.com
(cherry picked from commit
4922d4919596219864686be1e70dcd92c685ec9f)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lionel Landwerlin [Wed, 25 May 2016 13:30:41 +0000 (14:30 +0100)]
drm/i915: add missing condition for committing planes on crtc
The i915 driver checks for color management properties changes as part
of a plane update. Therefore a color management update must imply a
plane update, otherwise we never update the transformation matrixes
and degamma/gamma LUTs.
v2: add comment about moving the commit of color management registers
to an async worker
v3: Commit color management register right after vblank
v4: Move back color management commit condition together with planes
commit
v5: Trigger color management commit through the planes commit (Daniel)
v6: Make plane change update more readable
Fixes:
20a34e78f0d7 (drm/i915: Update color management during vblank evasion.)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
References: https://lkml.org/lkml/2016/7/14/614
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464183041-8478-1-git-send-email-lionel.g.landwerlin@intel.com
(cherry picked from commit
e7852a4b3a4fb6f6c18fdaff934580aa8521599a)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 18 Jul 2016 10:15:14 +0000 (13:15 +0300)]
drm/i915: Treat eDP as always connected, again
eDP should be treated as connected even if doesn't have an EDID. In that
case we'll use the timings from the VBT. That used to be the case until
commit
f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
broke things by considering even eDP disconnected if we fail to get
an EDID for it.
Fix things up again by treating eDP as always connected.
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Larry Finger <larry.finger@lwfinger.net>
Reported-by: Larry Finger <larry.finger@lwfinger.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96675
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes:
f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Larry Finger <larry.finger@lwfinger.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1468836914-16537-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit
1b7f2c8b0773d5ccbef43ef38a13ad33136c9679)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Kazuki Oikawa [Sun, 17 Jul 2016 16:16:15 +0000 (01:16 +0900)]
ALSA: usb-audio: Fix quirks code is not called
snd_usb_{set_interface,ctl_msg}_quirk checks chip->usb_id to need
calling a quirks code. But existed code path that not calling
dev_set_drvdata in usb_audio_probe.
Fixes:
79289e24194a ("ALSA: usb-audio: Refer to chip->usb_id for quirks and MIDI creation")
Signed-off-by: Kazuki Oikawa <k@oikw.org>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Robert Jarzmik [Thu, 14 Jul 2016 15:05:50 +0000 (17:05 +0200)]
mmc: pxamci: fix potential oops
As reported by Dan in his report in [1], there is a potential NULL
pointer derefence if these conditions are met :
- there is no platform_data provided, ie. host->pdata = NULL
Fix this by only using the platform data ro_invert when a gpio for
read-only is provided by the platform data.
This doesn't appear yet as every pxa board provides a platform_data, and
calls pxa_set_mci_info() with a non NULL pointer.
[1] [bug report] mmc: pxamci: fix card detect with slot-gpio API.
The commit
fd546ee6a7dc ("mmc: pxamci: fix card detect with slot-gpio
API") from Sep 26, 2015, leads to the following static checker warning:
drivers/mmc/host/pxamci.c:809 pxamci_probe()
warn: variable dereferenced before check 'host->pdata' (see line 798)
Fixes:
fd546ee6a7dc ("mmc: pxamci: fix card detect with slot-gpio API")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Taras Kondratiuk [Wed, 13 Jul 2016 22:05:38 +0000 (22:05 +0000)]
mmc: block: fix packed command header endianness
The code that fills packed command header assumes that CPU runs in
little-endian mode. Hence the header is malformed in big-endian mode
and causes MMC data transfer errors:
[ 563.200828] mmcblk0: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc40
[ 563.219647] mmcblk0: packed cmd failed, nr 2, sectors 16, failure index: -1
Convert header data to LE.
Signed-off-by: Taras Kondratiuk <takondra@cisco.com>
Fixes:
ce39f9d17c14 ("mmc: support packed write command for eMMC4.5 devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ville Viinikka [Fri, 8 Jul 2016 15:27:02 +0000 (18:27 +0300)]
mmc: block: fix free of uninitialized 'idata->buf'
Set 'idata->buf' to NULL so that it never gets returned without
initialization. This fixes a bug where mmc_blk_ioctl_cmd() would
free both 'idata' and 'idata->buf' but 'idata->buf' was returned
uninitialized.
Fixes:
1ff8950c0433 ("mmc: block: change to use kmalloc when copy data from userspace")
Signed-off-by: Ville Viinikka <ville@tuxera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Dave Airlie [Mon, 18 Jul 2016 05:38:17 +0000 (15:38 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
This time, a bunch of cleanups and refactoring work so that we can get
dt bindings upstream. In general, we keep compatibility with existing
downstream bindings as much as possible, to make backports to device
kernels easier, but now we have cleaner upstream bindings so that we
can start landing gpu/display support in upstream dts files.
Plus shrinker and madvise support, which has been on my todo list for
a long time. And support for arbitrary # of cmd bufs in submit ioctl
(I've got libdrm+mesa userspace for this on branches) to enable some
of the mesa batch/reorder stuff I'm working on. Userspace decides
whether this is supported based on advertised driver version. For the
interesting userspace bits, see:
https://github.com/freedreno/libdrm/commit/
1baf03ac6e77049d9c8be1e3d5164283ce82c9db
Plus support for ASoC hdmi audio codec, and few other random other
cleanups.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (52 commits)
drm/msm: Delete an unnecessary check before drm_gem_object_unreference()
drm/msm: Delete unnecessary checks before drm_gem_object_unreference_unlocked()
drm/msm/hdmi: Delete an unnecessary check before the function call "kfree"
drm/msm: return -EFAULT instead of bytes remaining
drm/msm/hdmi: use PTR_ERR_OR_ZERO() to simplify the code
drm/msm: add missing of_node_put after calling of_parse_phandle
drm/msm: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
drm/msm/dsi: Fix return value check in msm_dsi_host_set_display_mode()
drm: msm: Add ASoC generic hdmi audio codec support.
drm/msm/rd: add module param to dump all bo's
drm/msm/rd: split out snapshot_buf helper
drm/msm: bump kernel api version
drm/msm: deal with arbitrary # of cmd buffers
drm/msm: wire up vmap shrinker
drm/msm: change gem->vmap() to get/put
drm/msm: shrinker support
drm/msm: add put_iova() helper
drm/msm: add madvise ioctl
drm/msm: use mutex_lock_interruptible for submit ioctl
dt-bindings: msm/mdp: Provide details on MDP interface ports
...
Archit Taneja [Mon, 18 Jul 2016 03:14:04 +0000 (08:44 +0530)]
drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
The hdmi output in rcar-du uses the i2c slave encoder interface to link
to the adv7511 encoder chip. The kms driver creates encoder and connector
entities that internally uses the drm_encoder_slave_funcs ops provided by
the slave encoder driver.
Change the driver such that it expects a bridge entity instead of a slave
encoder. The hdmi connector code isn't needed anymore as we expect the
adv7511 bridge driver to create/manage the connector.
Note that the kms driver still expects a connector node for hdmi to be
present in DT. This node has no connection to the connector created
by the bridge driver.
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Mat Martineau [Sun, 17 Jul 2016 23:10:55 +0000 (00:10 +0100)]
KEYS: Fix for erroneous trust of incorrectly signed X.509 certs
Arbitrary X.509 certificates without authority key identifiers (AKIs)
can be added to "trusted" keyrings, including IMA or EVM certs loaded
from the filesystem. Signature verification is currently bypassed for
certs without AKIs.
Trusted keys were recently refactored, and this bug is not present in
4.6.
restrict_link_by_signature should return -ENOKEY (no matching parent
certificate found) if the certificate being evaluated has no AKIs,
instead of bypassing signature checks and returning 0 (new certificate
accepted).
Reported-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Lans Zhang [Sun, 17 Jul 2016 23:10:47 +0000 (00:10 +0100)]
pefile: Fix the failure of calculation for digest
Commit
e68503bd68 forgot to set digest_len and thus cause the following
error reported by kexec when launching a crash kernel:
kexec_file_load failed: Bad message
Fixes:
e68503bd68 (KEYS: Generalise system_verify_data() to provide access to internal content)
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
cc: kexec@lists.infradead.org
cc: linux-crypto@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
Lans Zhang [Sun, 17 Jul 2016 23:10:39 +0000 (00:10 +0100)]
PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined
This fix resolves the following kernel panic if an empty or missing
AuthorityKeyIdentifier is encountered and DEBUG is defined in
pkcs7_verify.c.
[ 459.041989] PKEY: <==public_key_verify_signature() = 0
[ 459.041993] PKCS7: Verified signature 1
[ 459.041995] PKCS7: ==> pkcs7_verify_sig_chain()
[ 459.041999] PKCS7: verify Sample DB Certificate for SCP: 01
[ 459.042002] PKCS7: - issuer Sample KEK Certificate for SCP
[ 459.042014] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 459.042135] IP: [<
ffffffff813e7b4c>] pkcs7_verify+0x72c/0x7f0
[ 459.042217] PGD
739e6067 PUD
77719067 PMD 0
[ 459.042286] Oops: 0000 [#1] PREEMPT SMP
[ 459.042328] Modules linked in:
[ 459.042368] CPU: 0 PID: 474 Comm: kexec Not tainted 4.7.0-rc7-WR8.0.0.0_standard+ #18
[ 459.042462] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 10/09/2014
[ 459.042586] task:
ffff880073a50000 ti:
ffff8800738e8000 task.ti:
ffff8800738e8000
[ 459.042675] RIP: 0010:[<
ffffffff813e7b4c>] [<
ffffffff813e7b4c>] pkcs7_verify+0x72c/0x7f0
[ 459.042784] RSP: 0018:
ffff8800738ebd58 EFLAGS:
00010246
[ 459.042845] RAX:
0000000000000000 RBX:
ffff880076b7da80 RCX:
0000000000000006
[ 459.042929] RDX:
0000000000000001 RSI:
ffffffff81c85001 RDI:
ffffffff81ca00a9
[ 459.043014] RBP:
ffff8800738ebd98 R08:
0000000000000400 R09:
ffff8800788a304c
[ 459.043098] R10:
0000000000000000 R11:
00000000000060ca R12:
ffff8800769a2bc0
[ 459.043182] R13:
ffff880077358300 R14:
0000000000000000 R15:
ffff8800769a2dc0
[ 459.043268] FS:
00007f24cc741700(0000) GS:
ffff880074e00000(0000) knlGS:
0000000000000000
[ 459.043365] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 459.043431] CR2:
0000000000000000 CR3:
0000000073a36000 CR4:
00000000001006f0
[ 459.043514] Stack:
[ 459.043530]
0000000000000000 ffffffbf00000020 31ffffff813e68b0 0000000000000002
[ 459.043644]
ffff8800769a2bc0 0000000000000000 00000000007197b8 0000000000000002
[ 459.043756]
ffff8800738ebdd8 ffffffff81153fb1 0000000000000000 0000000000000000
[ 459.043869] Call Trace:
[ 459.043898] [<
ffffffff81153fb1>] verify_pkcs7_signature+0x61/0x140
[ 459.043974] [<
ffffffff813e7f0b>] verify_pefile_signature+0x2cb/0x830
[ 459.044052] [<
ffffffff813e8470>] ? verify_pefile_signature+0x830/0x830
[ 459.044134] [<
ffffffff81048e25>] bzImage64_verify_sig+0x15/0x20
[ 459.046332] [<
ffffffff81046e09>] arch_kexec_kernel_verify_sig+0x29/0x40
[ 459.048552] [<
ffffffff810f10e4>] SyS_kexec_file_load+0x1f4/0x6c0
[ 459.050768] [<
ffffffff81050e36>] ? __do_page_fault+0x1b6/0x550
[ 459.052996] [<
ffffffff8199241f>] entry_SYSCALL_64_fastpath+0x17/0x93
[ 459.055242] Code: e8 0a d6 ff ff 85 c0 0f 88 7a fb ff ff 4d 39 fd 4d 89 7d 08 74 45 4d 89 fd e9 14 fe ff ff 4d 8b 76 08 31 c0 48 c7 c7 a9 00 ca 81 <41> 0f b7 36 49 8d 56 02 e8 d0 91 d6 ff 4d 8b 3c 24 4d 85 ff 0f
[ 459.060535] RIP [<
ffffffff813e7b4c>] pkcs7_verify+0x72c/0x7f0
[ 459.063040] RSP <
ffff8800738ebd58>
[ 459.065456] CR2:
0000000000000000
[ 459.075998] ---[ end trace
c15f0e897cda28dc ]---
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
Andrey Gusakov [Wed, 13 Jul 2016 07:49:59 +0000 (13:19 +0530)]
drm/bridge: tc358767: Add DPI to eDP bridge driver
Add a drm_bridge driver for the Toshiba TC358767 DPI/DSI to
eDP/DP bridge. Currently only DPI input with 24-bit RGB is
supported.
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Philipp Zabel [Wed, 13 Jul 2016 07:07:10 +0000 (09:07 +0200)]
dt-bindings: tc358767: add DT documentation
Add DT binding documentation for the Toshiba TC358767 eDP bridge.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Florian Fainelli [Fri, 15 Jul 2016 23:42:16 +0000 (16:42 -0700)]
net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata
The label lio_xmit_failed is used 3 times through liquidio_xmit() but it
always makes a call to dma_unmap_single() using potentially
uninitialized variables from "ndata" variable. Out of the 3 gotos, 2 run
after ndata has been initialized, and had a prior dma_map_single() call.
Fix this by adding a new error label: lio_xmit_dma_failed which does
this dma_unmap_single() and then processed with the lio_xmit_failed
fallthrough.
Fixes:
f21fb3ed364bb ("Add support of Cavium Liquidio ethernet adapters")
Reported-by: coverity (CID 1309740)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 15 Jul 2016 23:41:16 +0000 (16:41 -0700)]
net: nb8800: Fix SKB leak in nb8800_receive()
In case nb8800_receive() fails to allocate a fragment, we would leak the
SKB freshly allocated and just return, instead, free it.
Reported-by: coverity (CID 1341750)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 15 Jul 2016 23:40:22 +0000 (16:40 -0700)]
et131x: Fix logical vs bitwise check in et131x_tx_timeout()
We should be using a logical check here instead of a bitwise operation
to check if the device is closed already in et131x_tx_timeout().
Reported-by: coverity (CID 146498)
Fixes:
38df6492eb511 ("et131x: Add PCIe gigabit ethernet driver et131x to drivers/net")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Thu, 14 Jul 2016 16:00:10 +0000 (18:00 +0200)]
vlan: use a valid default mtu value for vlan over macsec
macsec can't cope with mtu frames which need vlan tag insertion, and
vlan device set the default mtu equal to the underlying dev's one.
By default vlan over macsec devices use invalid mtu, dropping
all the large packets.
This patch adds a netif helper to check if an upper vlan device
needs mtu reduction. The helper is used during vlan devices
initialization to set a valid default and during mtu updating to
forbid invalid, too bit, mtu values.
The helper currently only check if the lower dev is a macsec device,
if we get more users, we need to update only the helper (possibly
reserving an additional IFF bit).
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Markus Elfring [Wed, 13 Jul 2016 17:29:19 +0000 (19:29 +0200)]
drm/msm: Delete an unnecessary check before drm_gem_object_unreference()
The drm_gem_object_unreference() function tests whether its argument
is NULL and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Markus Elfring [Wed, 13 Jul 2016 17:15:35 +0000 (19:15 +0200)]
drm/msm: Delete unnecessary checks before drm_gem_object_unreference_unlocked()
The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Markus Elfring [Wed, 13 Jul 2016 16:54:11 +0000 (18:54 +0200)]
drm/msm/hdmi: Delete an unnecessary check before the function call "kfree"
The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Dan Carpenter [Wed, 13 Jul 2016 10:35:29 +0000 (13:35 +0300)]
drm/msm: return -EFAULT instead of bytes remaining
copy_to/from_user returns the number of bytes remaining to be copied but
we want to return -EFAULT.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Wei Yongjun [Tue, 12 Jul 2016 11:06:52 +0000 (11:06 +0000)]
drm/msm/hdmi: use PTR_ERR_OR_ZERO() to simplify the code
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Peter Chen [Mon, 4 Jul 2016 08:49:50 +0000 (16:49 +0800)]
drm/msm: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
[rebased on top of Archit's DT rework, so looses one hunk]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Laurent Pinchart [Wed, 8 Jun 2016 23:32:10 +0000 (02:32 +0300)]
drm/msm: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
The driver needs the number of bytes per pixel, not the bpp and depth
info meant for fbdev compatibility. Use the right API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Wei Yongjun [Sat, 18 Jun 2016 17:26:37 +0000 (17:26 +0000)]
drm/msm/dsi: Fix return value check in msm_dsi_host_set_display_mode()
In case of error, the function drm_mode_duplicate() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Srinivas Kandagatla [Fri, 10 Jun 2016 09:45:56 +0000 (10:45 +0100)]
drm: msm: Add ASoC generic hdmi audio codec support.
This patch adds support to generic audio codec via
ASoC hdmi-codec infrastucture which is merged recently.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[rebased on
efc9194]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Thu, 16 Jun 2016 15:54:41 +0000 (11:54 -0400)]
drm/msm/rd: add module param to dump all bo's
By default, if using $debugfs/.../rd to log cmdstream, only the
cmdstream buffers themselves are logged. But in some cases we want
to capture other buffers in the submit (to see VBO's or shaders).
So add a mod-param knob to control this.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Thu, 16 Jun 2016 15:49:09 +0000 (11:49 -0400)]
drm/msm/rd: split out snapshot_buf helper
(reduce the noise in next patch)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 1 Jun 2016 18:02:02 +0000 (14:02 -0400)]
drm/msm: bump kernel api version
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 1 Jun 2016 18:17:40 +0000 (14:17 -0400)]
drm/msm: deal with arbitrary # of cmd buffers
For some optimizations coming on the userspace side, splitting larger
draw or gmem cmds into multiple cmdstream buffers, we need to support
much more than the previous small/arbitrary limit.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 27 May 2016 15:16:28 +0000 (11:16 -0400)]
drm/msm: wire up vmap shrinker
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Thu, 26 May 2016 20:24:35 +0000 (16:24 -0400)]
drm/msm: change gem->vmap() to get/put
Before we can add vmap shrinking, we really need to know which vmap'ings
are currently being used. So switch to get/put interface. Stubbed put
fxns for now.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 17 May 2016 20:19:32 +0000 (16:19 -0400)]
drm/msm: shrinker support
For a first step, only purge obj->madv==DONTNEED objects. We could be
more agressive and next try unpinning inactive objects.. but that is
only useful if you have swap.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 1 Jun 2016 15:38:28 +0000 (11:38 -0400)]
drm/msm: add put_iova() helper
We'll need this too for shrinker/purging.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 17 May 2016 19:44:49 +0000 (15:44 -0400)]
drm/msm: add madvise ioctl
Doesn't do anything too interesting until we wire up shrinker. Pretty
much lifted from i915.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Tue, 17 May 2016 19:43:35 +0000 (15:43 -0400)]
drm/msm: use mutex_lock_interruptible for submit ioctl
Be kinder to things that do lots of signal handling (ie. Xorg)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Archit Taneja [Tue, 14 Jun 2016 12:17:26 +0000 (17:47 +0530)]
dt-bindings: msm/mdp: Provide details on MDP interface ports
The MDP4/5 DT node now contains a list of ports that describe how it
connects to external encoder interfaces like DSI and HDMI. These follow
the standard of_graph bindings, and allow us to get rid of the 'connectors'
phandle that contained a list of all the external encoders connected to
MDP.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Archit Taneja [Tue, 14 Jun 2016 10:43:51 +0000 (16:13 +0530)]
dt-bindings: msm/mdp5: Add MDP5 display bindings
Add a new doc for DT bindings for platforms that contain MDP5 display
controller hardware. The doc describes bindings for the top level
MDSS wrapper hardware and MDP5 itself.
Add an example for the bindings as found in MSM8916.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>