OSDN Git Service
Joel Becker [Thu, 13 Nov 2008 22:49:16 +0000 (14:49 -0800)]
ocfs2: Wrap extent block reads in a dedicated function.
We weren't consistently checking extent blocks after we read them.
Most places checked the signature, but none checked h_blkno or
h_fs_signature. Create a toplevel ocfs2_read_extent_block() that does
the read and the validation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Thu, 13 Nov 2008 22:49:15 +0000 (14:49 -0800)]
ocfs2: Morph the haphazard OCFS2_IS_VALID_GROUP_DESC() checks.
Random places in the code would check a group descriptor bh to see if it
was valid. The previous commit unified descriptor block reads,
validating all block reads in the same place. Thus, these checks are no
longer necessary. Rather than eliminate them, however, we change them
to BUG_ON() checks. This ensures the assumptions remain true. All of
the code paths to these checks have been audited to ensure they come
from a validated descriptor read.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Thu, 13 Nov 2008 22:49:14 +0000 (14:49 -0800)]
ocfs2: Wrap group descriptor reads in a dedicated function.
We have a clean call for validating group descriptors, but every place
that wants the always does a read_block()+validate() call pair. Create
a toplevel ocfs2_read_group_descriptor() that does the right
thing. This allows us to leverage the single call point later for
fancier handling. We also add validation of gd->bg_generation against
the superblock and gd->bg_blkno against the block we thought we read.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Thu, 13 Nov 2008 22:49:13 +0000 (14:49 -0800)]
ocfs2: Consolidate validation of group descriptors.
Currently the validation of group descriptors is directly duplicated so
that one version can error the filesystem and the other (resize) can
just report the problem. Consolidate to one function that takes a
boolean. Wrap that function with the old call for the old users.
This is in preparation for lifting the read+validate step into a
single function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Thu, 13 Nov 2008 22:49:12 +0000 (14:49 -0800)]
ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.
Random places in the code would check a dinode bh to see if it was
valid. Not only did they do different levels of validation, they
handled errors in different ways.
The previous commit unified inode block reads, validating all block
reads in the same place. Thus, these haphazard checks are no longer
necessary. Rather than eliminate them, however, we change them to
BUG_ON() checks. This ensures the assumptions remain true. All of the
code paths to these checks have been audited to ensure they come from a
validated inode read.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Thu, 13 Nov 2008 22:49:11 +0000 (14:49 -0800)]
ocfs2: Wrap inode block reads in a dedicated function.
The ocfs2 code currently reads inodes off disk with a simple
ocfs2_read_block() call. Each place that does this has a different set
of sanity checks it performs. Some check only the signature. A couple
validate the block number (the block read vs di->i_blkno). A couple
others check for VALID_FL. Only one place validates i_fs_generation. A
couple check nothing. Even when an error is found, they don't all do
the same thing.
We wrap inode reading into ocfs2_read_inode_block(). This will validate
all the above fields, going readonly if they are invalid (they never
should be). ocfs2_read_inode_block_full() is provided for the places
that want to pass read_block flags. Every caller is passing a struct
inode with a valid ip_blkno, so we don't need a separate blkno argument
either.
We will remove the validation checks from the rest of the code in a
later commit, as they are no longer necessary.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:17:52 +0000 (11:17 +0800)]
ocfs2: add mount option and Kconfig option for acl
This patch adds the Kconfig option "CONFIG_OCFS2_FS_POSIX_ACL"
and mount options "acl" to enable acls in Ocfs2.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:17:41 +0000 (11:17 +0800)]
ocfs2: add ocfs2_init_acl in mknod
We need to get the parent directories acls and let the new child inherit it.
To this, we add additional calculations for data/metadata allocation.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:17:29 +0000 (11:17 +0800)]
ocfs2: add ocfs2_acl_chmod
This function is used to update acl xattrs during file mode changes.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:17:18 +0000 (11:17 +0800)]
ocfs2: add ocfs2_check_acl
This function is used to enhance permission checking with POSIX ACLs.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:17:04 +0000 (11:17 +0800)]
ocfs2: add POSIX ACL API
This patch adds POSIX ACL(access control lists) APIs in ocfs2. We convert
struct posix_acl to many ocfs2_acl_entry and regard them as an extended
attribute entry.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:16:53 +0000 (11:16 +0800)]
ocfs2: add ocfs2_xattr_get_nolock
This function does the work of ocfs2_xattr_get under an open lock.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:16:41 +0000 (11:16 +0800)]
ocfs2: add ocfs2_init_security in during file create
Security attributes must be set when creating a new inode.
We do this in three steps.
- First, get security xattr's name and value by security_operation
- Calculate and reserve the meta data and clusters needed by this security
xattr before starting transaction
- Finally, we set it before add_entry
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:16:27 +0000 (11:16 +0800)]
ocfs2: add security xattr API
This patch add security xattr set/get/list APIs to
support security attributes in Ocfs2.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:16:03 +0000 (11:16 +0800)]
ocfs2: add ocfs2_xattr_set_handle
This function is used to set xattr's in a started transaction. It is only
called during inode creation inode for initial security/acl xattrs of the
new inode. These xattrs could be put into ibody or extent block, so xattr
bucket would not be use in this case.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tiger Yang [Fri, 14 Nov 2008 03:15:44 +0000 (11:15 +0800)]
ocfs2: move new inode allocation out of the transaction
Move out inode allocation from ocfs2_mknod_locked() because
vfs_dq_init() must be called outside of a transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Mark Fasheh [Wed, 12 Nov 2008 23:16:38 +0000 (15:16 -0800)]
ocfs2: turn __ocfs2_remove_inode_range() into ocfs2_remove_btree_range()
This patch genericizes the high level handling of extent removal.
ocfs2_remove_btree_range() is nearly identical to
__ocfs2_remove_inode_range(), except that extent tree operations have been
used where necessary. We update ocfs2_remove_inode_range() to use the
generic helper. Now extent tree based structures have an easy way to
truncate ranges.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Tao Ma [Wed, 12 Nov 2008 00:27:01 +0000 (08:27 +0800)]
ocfs2/xattr: Merge xattr set transaction.
In current ocfs2/xattr, the whole xattr set is divided into
many steps are many transaction are used, this make the
xattr set process isn't like a real transaction, so this
patch try to merge all the transaction into one. Another
benefit is that acl can use it easily now.
I don't merge the transaction of deleting xattr when we
remove an inode. The reason is that if we have a large number
of xattrs and every xattrs has large values(large enough
for outside storage), the whole transaction will be very
huge and it looks like jbd can't handle it(I meet with a
jbd complain once). And the old inode removal is also divided
into many steps, so I'd like to leave as it is.
Note:
In xattr set, I try to avoid ocfs2_extend_trans since if
the credits aren't enough for the extension, it will commit
all the dirty blocks and create a new transaction which may
lead to inconsistency in metadata. All ocfs2_extend_trans
remained are safe now.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tao Ma [Wed, 12 Nov 2008 00:27:00 +0000 (08:27 +0800)]
ocfs2/xattr: Reserve meta/data at the beginning of ocfs2_xattr_set.
In ocfs2 xattr set, we reserve metadata and clusters in any place
they are needed. It is time-consuming and ineffective, so this
patch try to reserve metadata and clusters at the beginning of
ocfs2_xattr_set.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tao Ma [Wed, 12 Nov 2008 00:26:59 +0000 (08:26 +0800)]
ocfs2/xattr: Move clusters free into dealloc.
Move clusters free process into dealloc context so that
they can be freed after the transaction.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tao Ma [Wed, 12 Nov 2008 00:26:58 +0000 (08:26 +0800)]
ocfs2: Add clusters free in dealloc_ctxt.
Now in ocfs2 xattr set, the whole process are divided into many small
parts and they are wrapped into diffrent transactions and it make the
set doesn't look like a real transaction. So we want to integrate it
into a real one.
In some cases we will allocate some clusters and free some in just one
transaction. e.g, one xattr is larger than inline size, so it and its
value root is stored within the inode while the value is outside in a
cluster. Then we try to update it with a smaller value(larger than the
size of root but smaller than inline size), we may need to free the
outside cluster while allocate a new bucket(one cluster) since now the
inode may be full. The old solution will lock the global_bitmap(if the
local alloc failed in stress test) and then the truncate log. This will
cause a ABBA lock with truncate log flush.
This patch add the clusters free in dealloc_ctxt, so that we can record
the free clusters during the transaction and then free it after we
release the global_bitmap in xattr set.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tao Ma [Wed, 12 Nov 2008 00:26:57 +0000 (08:26 +0800)]
ocfs2/xattr: Only extend xattr bucket in need.
When the first block of a bucket is filled up with xattr
entries, we normally extend the bucket. But if we are
just replace one xattr with small length, we don't need
to extend it. This is important since we will calculate
what we need before the transaction and in this situation
no resources will be allocated.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tao Ma [Thu, 6 Nov 2008 00:10:48 +0000 (08:10 +0800)]
ocfs2/xattr: Only set buffer update if it doesn't exist in cache.
When we call ocfs2_init_xattr_bucket, we deem that the new buffer head
will be written to disk immediately, so we just use sb_getblk. But in
some cases the buffer may have already been in ocfs2 uptodate cache,
so we only call ocfs2_set_buffer_uptodate if the buffer head isn't
in the cache.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tao Ma [Thu, 6 Nov 2008 00:10:47 +0000 (08:10 +0800)]
ocfs2/xattr: Remove additional bucket allocation in bucket defragment.
Joel has refactored xattr bucket and make xattr bucket a general
wrapper. So in ocfs2_defrag_xattr_bucket, we have already passed the
bucket in, so there is no need to allocate a new one and read it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Tue, 28 Oct 2008 01:07:45 +0000 (18:07 -0700)]
ocfs2: Use buckets in ocfs2_xattr_set_entry_in_bucket().
The ocfs2_xattr_set_entry_in_bucket() function is already working on an
ocfs2_xattr_bucket structure, so let's use the bucket API.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Mon, 27 Oct 2008 22:25:18 +0000 (15:25 -0700)]
ocfs2: Use buckets in ocfs2_defrag_xattr_bucket().
Use the ocfs2_xattr_bucket abstraction for reading and writing the
bucket in ocfs2_defrag_xattr_bucket().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Mon, 27 Oct 2008 22:18:29 +0000 (15:18 -0700)]
ocfs2: Use buckets in ocfs2_xattr_create_index_block().
Use the ocfs2_xattr_bucket abstraction in
ocfs2_xattr_create_index_block() and its helpers. We get more efficient
reads, a lot less buffer_head munging, and nicer code to boot. While
we're at it, ocfs2_xattr_update_xattr_search() becomes void.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Mon, 27 Oct 2008 22:01:54 +0000 (15:01 -0700)]
ocfs2: Use buckets in ocfs2_xattr_bucket_find().
Change the ocfs2_xattr_bucket_find() function to use ocfs2_xattr_bucket
as its abstraction. This makes for more efficient reads, as buckets are
linear blocks, and also has improved caching characteristics. It also
reads better.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Sat, 25 Oct 2008 02:13:20 +0000 (19:13 -0700)]
ocfs2: Take ocfs2_xattr_bucket structures off of the stack.
The ocfs2_xattr_bucket structure is a nice abstraction, but it is a bit
large to have on the stack. Just like ocfs2_path, let's allocate it
with a ocfs2_xattr_bucket_new() function.
We can now store the inode on the bucket, cleaning up all the other
bucket functions. While we're here, we catch another place or two that
wasn't using ocfs2_read_xattr_bucket().
Updates:
- No longer allocating xis.bucket, as it will never be used.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Sat, 25 Oct 2008 01:54:43 +0000 (18:54 -0700)]
ocfs2: Copy xattr buckets with a dedicated function.
Now that the places that copy whole buckets are using struct
ocfs2_xattr_bucket, we can do the copy in a dedicated function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Sat, 25 Oct 2008 01:47:33 +0000 (18:47 -0700)]
ocfs2: Wrap journal_access/journal_dirty for xattr buckets.
A common action is to call ocfs2_journal_access() and
ocfs2_journal_dirty() on the buffer heads of an xattr bucket. Let's
create nice wrappers.
While we're there, let's drop the places that try to be smart by writing
only the first and last blocks of a bucket. A bucket is contiguous, so
writing the whole thing is actually more efficient.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Sat, 25 Oct 2008 00:33:40 +0000 (17:33 -0700)]
ocfs2: Improve ocfs2_read_xattr_bucket().
The ocfs2_read_xattr_bucket() function would read an xattr bucket into a
list of buffer heads. However, we have a nice ocfs2_xattr_bucket
structure. Let's have it fill that out instead.
In addition, ocfs2_read_xattr_bucket() would initialize buffer heads for
a bucket that's never been on disk before. That's confusing. Let's
call that functionality ocfs2_init_xattr_bucket().
The functions ocfs2_cp_xattr_bucket() and ocfs2_half_xattr_bucket() are
updated to use the ocfs2_xattr_bucket structure rather than raw bh
lists. That way they can use the new read/init calls. In addition,
they drop the wasted read of an existing target bucket.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Sat, 25 Oct 2008 00:16:48 +0000 (17:16 -0700)]
ocfs2: Provide a wrapper to brelse() xattr bucket buffers.
A common theme is walking all the buffer heads on an ocfs2_xattr_bucket
and releasing them. Let's wrap that.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Sat, 25 Oct 2008 00:04:49 +0000 (17:04 -0700)]
ocfs2: Convenient access to an xattr bucket's header.
The xattr code often wants to access the ocfs2_xattr_header at the start
of an bucket. Rather than walk the pointer chains, let's just create
another nice macro. As a side benefit, we can get rid of the mostly
spurious ->bu_xh element on the bucket structure. The idea is ripped
from the ocfs2_path code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Fri, 24 Oct 2008 23:57:21 +0000 (16:57 -0700)]
ocfs2: Convenient access to xattr bucket data blocks.
The xattr code often wants to access the data pointer for blocks in an
xattr bucket. This is usually found by dereferencing the bh array
hanging off of the ocfs2_xattr_bucket structure. Rather than do this
all the time, let's provide a nice little macro. The idea is ripped
from the ocfs2_path code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Fri, 24 Oct 2008 23:21:03 +0000 (16:21 -0700)]
ocfs2: Convenient access to an xattr bucket's block number.
The xattr code often wants to know the block number of an xattr bucket.
This is usually found by dereferencing the first bh hanging off of the
ocfs2_xattr_bucket structure. Rather than do this all the time, let's
provide a nice little macro. The idea is ripped from the ocfs2_path
code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Joel Becker [Sun, 19 Oct 2008 02:11:42 +0000 (19:11 -0700)]
ocfs2: Field prefixes for the xattr_bucket structure
The ocfs2_xattr_bucket structure keeps track of the buffers for one
xattr bucket. Let's prefix the fields for easier code navigation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Linus Torvalds [Mon, 5 Jan 2009 00:32:11 +0000 (16:32 -0800)]
Merge branch 'audit.b61' of git://git./linux/kernel/git/viro/audit-current
* 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
audit: validate comparison operations, store them in sane form
clean up audit_rule_{add,del} a bit
make sure that filterkey of task,always rules is reported
audit rules ordering, part 2
fixing audit rule ordering mess, part 1
audit_update_lsm_rules() misses the audit_inode_hash[] ones
sanitize audit_log_capset()
sanitize audit_fd_pair()
sanitize audit_mq_open()
sanitize AUDIT_MQ_SENDRECV
sanitize audit_mq_notify()
sanitize audit_mq_getsetattr()
sanitize audit_ipc_set_perm()
sanitize audit_ipc_obj()
sanitize audit_socketcall
don't reallocate buffer in every audit_sockaddr()
Alessandro Zummo [Sun, 4 Jan 2009 20:00:54 +0000 (12:00 -0800)]
rtc: add alarm/update irq interfaces
Add standard interfaces for alarm/update irqs enabling. Drivers are no
more required to implement equivalent ioctl code as rtc-dev will provide
it.
UIE emulation should now be handled correctly and will work even for those
RTC drivers who cannot be configured to do both UIE and AIE.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Sun, 4 Jan 2009 20:00:53 +0000 (12:00 -0800)]
fs: symlink write_begin allocation context fix
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bruno Prémont [Sun, 4 Jan 2009 21:11:54 +0000 (13:11 -0800)]
viafb: fix crashes due to 4k stack overflow
The function viafb_cursor() uses 2 stack-variables of CURSOR_SIZE bits;
CURSOR_SIZE is defined as (8 * 1024). Using up twice 1k on stack is too
much for 4k-stack (though it works with 8k-stacks). Make those two
variables kzalloc'ed to preserve stack space.
Also merge the whole lot of local struct's in viafb_ioctl into a union so
the stack usage gets minimized here as well. (struct's are only accessed
in their indicidual IOCTL case) This second part is only compile-tested as
I know of no userspace app using the IOCTLs.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: <JosephChan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pekka Enberg [Sun, 4 Jan 2009 20:00:48 +0000 (12:00 -0800)]
fs: introduce bgl_lock_ptr()
As suggested by Andreas Dilger, introduce a bgl_lock_ptr() helper in
<linux/blockgroup_lock.h> and add separate sb_bgl_lock() helpers to
filesystem specific header files to break the hidden dependency to
struct ext[234]_sb_info.
Also, while at it, convert the macros to static inlines to try make up
for all the times I broke Andrew Morton's tree.
Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sun, 4 Jan 2009 20:00:47 +0000 (12:00 -0800)]
spi.h uses/needs device.h
Include header files as used/needed:
In file included from drivers/leds/leds-dac124s085.c:16:
include/linux/spi/spi.h:66: error: field 'dev' has incomplete type
include/linux/spi/spi.h: In function 'to_spi_device':
include/linux/spi/spi.h:100: warning: type defaults to 'int' in declaration of '__mptr'
...
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adam Lackorzynski [Sun, 4 Jan 2009 20:00:46 +0000 (12:00 -0800)]
vmalloc.c: fix flushing in vmap_page_range()
The flush_cache_vmap in vmap_page_range() is called with the end of the
range twice. The following patch fixes this for me.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Sun, 4 Jan 2009 20:00:45 +0000 (12:00 -0800)]
cgroups: fix a race between cgroup_clone and umount
The race is calling cgroup_clone() while umounting the ns cgroup subsys,
and thus cgroup_clone() might access invalid cgroup_fs, or kill_sb() is
called after cgroup_clone() created a new dir in it.
The BUG I triggered is BUG_ON(root->number_of_cgroups != 1);
------------[ cut here ]------------
kernel BUG at kernel/cgroup.c:1093!
invalid opcode: 0000 [#1] SMP
...
Process umount (pid: 5177, ti=
e411e000 task=
e40c4670 task.ti=
e411e000)
...
Call Trace:
[<
c0493df7>] ? deactivate_super+0x3f/0x51
[<
c04a3600>] ? mntput_no_expire+0xb3/0xdd
[<
c04a3ab2>] ? sys_umount+0x265/0x2ac
[<
c04a3b06>] ? sys_oldumount+0xd/0xf
[<
c0403911>] ? sysenter_do_call+0x12/0x31
...
EIP: [<
c0456e76>] cgroup_kill_sb+0x23/0xe0 SS:ESP 0068:
e411ef2c
---[ end trace
c766c1be3bf944ac ]---
Cc: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Tue, 16 Dec 2008 10:59:26 +0000 (05:59 -0500)]
audit: validate comparison operations, store them in sane form
Don't store the field->op in the messy (and very inconvenient for e.g.
audit_comparator()) form; translate to dense set of values and do full
validation of userland-submitted value while we are at it.
->audit_init_rule() and ->audit_match_rule() get new values now; in-tree
instances updated.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 15 Dec 2008 06:50:28 +0000 (01:50 -0500)]
clean up audit_rule_{add,del} a bit
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Tue, 16 Dec 2008 08:51:22 +0000 (03:51 -0500)]
make sure that filterkey of task,always rules is reported
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 15 Dec 2008 06:17:50 +0000 (01:17 -0500)]
audit rules ordering, part 2
Fix the actual rule listing; add per-type lists _not_ used for matching,
with all exit,... sitting on one such list. Simplifies "do something
for all rules" logics, while we are at it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Mon, 15 Dec 2008 04:45:27 +0000 (23:45 -0500)]
fixing audit rule ordering mess, part 1
Problem: ordering between the rules on exit chain is currently lost;
all watch and inode rules are listed after everything else _and_
exit,never on one kind doesn't stop exit,always on another from
being matched.
Solution: assign priorities to rules, keep track of the current
highest-priority matching rule and its result (always/never).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 14 Dec 2008 17:04:02 +0000 (12:04 -0500)]
audit_update_lsm_rules() misses the audit_inode_hash[] ones
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 4 Jan 2009 19:52:57 +0000 (14:52 -0500)]
sanitize audit_log_capset()
* no allocations
* return void
* don't duplicate checked for dummy context
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 14 Dec 2008 09:57:47 +0000 (04:57 -0500)]
sanitize audit_fd_pair()
* no allocations
* return void
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 14 Dec 2008 09:02:26 +0000 (04:02 -0500)]
sanitize audit_mq_open()
* don't bother with allocations
* don't do double copy_from_user()
* don't duplicate parts of check for audit_dummy_context()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 14 Dec 2008 08:46:48 +0000 (03:46 -0500)]
sanitize AUDIT_MQ_SENDRECV
* logging the original value of *msg_prio in mq_timedreceive(2)
is insane - the argument is write-only (i.e. syscall always
ignores the original value and only overwrites it).
* merge __audit_mq_timed{send,receive}
* don't do copy_from_user() twice
* don't mess with allocations in auditsc part
* ... and don't bother checking !audit_enabled and !context in there -
we'd already checked for audit_dummy_context().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 10 Dec 2008 12:16:12 +0000 (07:16 -0500)]
sanitize audit_mq_notify()
* don't copy_from_user() twice
* don't bother with allocations
* don't duplicate parts of audit_dummy_context()
* make it return void
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 10 Dec 2008 11:58:59 +0000 (06:58 -0500)]
sanitize audit_mq_getsetattr()
* get rid of allocations
* make it return void
* don't duplicate parts of audit_dummy_context()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 10 Dec 2008 08:47:15 +0000 (03:47 -0500)]
sanitize audit_ipc_set_perm()
* get rid of allocations
* make it return void
* simplify callers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 10 Dec 2008 08:40:06 +0000 (03:40 -0500)]
sanitize audit_ipc_obj()
* get rid of allocations
* make it return void
* simplify callers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 10 Dec 2008 08:16:51 +0000 (03:16 -0500)]
sanitize audit_socketcall
* don't bother with allocations
* now that it can't fail, make it return void
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Wed, 10 Dec 2008 00:50:34 +0000 (19:50 -0500)]
don't reallocate buffer in every audit_sockaddr()
No need to do that more than once per process lifetime; allocating/freeing
on each sendto/accept/etc. is bloody pointless.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 3 Jan 2009 20:04:39 +0000 (12:04 -0800)]
Merge branch 'cpus4096-for-linus-3' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
x86: setup_per_cpu_areas() cleanup
cpumask: fix compile error when CONFIG_NR_CPUS is not defined
cpumask: use alloc_cpumask_var_node where appropriate
cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
x86: use cpumask_var_t in acpi/boot.c
x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
sched: put back some stack hog changes that were undone in kernel/sched.c
x86: enable cpus display of kernel_max and offlined cpus
ia64: cpumask fix for is_affinity_mask_valid()
cpumask: convert RCU implementations, fix
xtensa: define __fls
mn10300: define __fls
m32r: define __fls
h8300: define __fls
frv: define __fls
cris: define __fls
cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
cpumask: zero extra bits in alloc_cpumask_var_node
cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
cpumask: convert mm/
...
Linus Torvalds [Sat, 3 Jan 2009 20:03:52 +0000 (12:03 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/joro/linux-2.6-iommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu: (89 commits)
AMD IOMMU: remove now unnecessary #ifdefs
AMD IOMMU: prealloc_protection_domains should be static
kvm/iommu: fix compile warning
AMD IOMMU: add statistics about total number of map requests
AMD IOMMU: add statistics about allocated io memory
AMD IOMMU: add stats counter for domain tlb flushes
AMD IOMMU: add stats counter for single iommu domain tlb flushes
AMD IOMMU: add stats counter for cross-page request
AMD IOMMU: add stats counter for free_coherent requests
AMD IOMMU: add stats counter for alloc_coherent requests
AMD IOMMU: add stats counter for unmap_sg requests
AMD IOMMU: add stats counter for map_sg requests
AMD IOMMU: add stats counter for unmap_single requests
AMD IOMMU: add stats counter for map_single requests
AMD IOMMU: add stats counter for completion wait events
AMD IOMMU: add init code for statistic collection
AMD IOMMU: add necessary header defines for stats counting
AMD IOMMU: add Kconfig entry for statistic collection code
AMD IOMMU: use dev_name in iommu_enable function
AMD IOMMU: use calc_devid in prealloc_protection_domains
...
Linus Torvalds [Sat, 3 Jan 2009 20:02:18 +0000 (12:02 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (34 commits)
V4L/DVB (10173): Missing v4l2_prio_close in radio_release
V4L/DVB (10172): add DVB_DEVICE_TYPE= to uevent
V4L/DVB (10171): Use usb_set_intfdata
V4L/DVB (10170): tuner-simple: prevent possible OOPS caused by divide by zero error
V4L/DVB (10168): sms1xxx: fix inverted gpio for lna control on tiger r2
V4L/DVB (10167): sms1xxx: add support for inverted gpio
V4L/DVB (10166): dvb frontend: stop using non-C99 compliant comments
V4L/DVB (10165): Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2
V4L/DVB (10164): Add missing S2 caps flag to S2API
V4L/DVB (10163): em28xx: allocate adev together with struct em28xx dev
V4L/DVB (10162): tuner-simple: Fix tuner type set message
V4L/DVB (10161): saa7134: fix autodetection for AVer TV GO 007 FM Plus
V4L/DVB (10160): em28xx: update chip id for em2710
V4L/DVB (10157): Add USB ID for the Sil4701 radio from DealExtreme
V4L/DVB (10156): saa7134: Add support for Avermedia AVer TV GO 007 FM Plus
V4L/DVB (10155): Add TEA5764 radio driver
V4L/DVB (10154): saa7134: fix a merge conflict on Behold H6 board
V4L/DVB (10153): Add the Beholder H6 card to DVB-T part of sources.
V4L/DVB (10152): Change configuration of the Beholder H6 card
V4L/DVB (10151): Fix I2C bridge error in zl10353
...
Yinghai Lu [Sat, 3 Jan 2009 08:06:34 +0000 (00:06 -0800)]
sparseirq: move set/get_timer_rand_state back to .c
those two functions only used in that C file
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 3 Jan 2009 20:00:07 +0000 (12:00 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: warn about voltage mismatches
mmc_spi: Add support for OpenFirmware bindings
pxamci: fix dma_unmap_sg length
mmc_block: ensure all sectors that do not have errors are read
drivers/mmc: Move a dereference below a NULL test
sdhci: handle built-in sdhci with modular leds class
mmc: balanc pci_iomap with pci_iounmap
mmc_block: print better error messages
mmc: Add mmc_vddrange_to_ocrmask() helper function
ricoh_mmc: Handle newer models of Ricoh controllers
mmc: Add 8-bit bus width support
sdhci: activate led support also when module
mmc: trivial annotation of 'blocks'
pci: use pci_ioremap_bar() in drivers/mmc
sdricoh_cs: Add support for Bay Controller devices
mmc: at91_mci: reorder timer setup and mmc_add_host() call
Linus Torvalds [Sat, 3 Jan 2009 19:59:13 +0000 (11:59 -0800)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] Add support for the WM8350 watchdog
[WATCHDOG] Add SMSC SCH311x Watchdog Timer.
[WATCHDOG] ib700wdt - add timeout parameter
Linus Torvalds [Sat, 3 Jan 2009 19:56:24 +0000 (11:56 -0800)]
Merge branch 'cputime' of git://git390.osdl.marist.edu/linux-2.6
* 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[PATCH] fast vdso implementation for CLOCK_THREAD_CPUTIME_ID
[PATCH] improve idle cputime accounting
[PATCH] improve precision of idle time detection.
[PATCH] improve precision of process accounting.
[PATCH] idle cputime accounting
[PATCH] fix scaled & unscaled cputime accounting
Linus Torvalds [Sat, 3 Jan 2009 19:46:17 +0000 (11:46 -0800)]
Make %p print '(null)' for NULL pointers
Before, when we only ever printed out the pointer value itself, a NULL
pointer would never cause issues and might as well be printed out as
just its numeric value.
However, with the extended %p formats, especially %pR, we might validly
want to print out resources for debugging. And sometimes they don't
even exist, and the resource pointer is just NULL. Print it out as
such, rather than oopsing.
This is a more generic version of a patch done by Trent Piepho (catching
all %p cases rather than just %pR, and using "(null)" instead of
"[NULL]" to match glibc).
Requested-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 3 Jan 2009 07:16:33 +0000 (07:16 +0000)]
get rid of special-casing the /sbin/loader on alpha
... just make it a binfmt handler like #! one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 3 Jan 2009 07:16:23 +0000 (07:16 +0000)]
sanitize ifdefs in binfmt_aout
They are actually alpha vs. i386/arm/m68k i.e. ecoff vs. aout.
In the only place where we actually tried to handle arm and i386/m68k in
different ways (START_DATA() in coredump handling), the arm variant
works for all of them (i386 and m68k have u.start_code set to 0).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sat, 3 Jan 2009 07:16:13 +0000 (07:16 +0000)]
remove the rudiment of a.out for sparc
it's been used only in sunos compat
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Blemings [Sat, 3 Jan 2009 05:48:44 +0000 (16:48 +1100)]
Updated contact info for CREDITS file
This updates some personal info in the CREDITS file.
I'm no longer actively involved in Keyspan driver work so shouldn't
really be listed as a Maintainer here.
I do however field the occasional question on them and as I'm dropping
the misc.nu domain, want to ensure people can find me should they need
to.
Signed-off-by: Hugh Blemings <hugh@blemings.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cyrill Gorcunov [Fri, 2 Jan 2009 18:51:32 +0000 (21:51 +0300)]
x86: setup_per_cpu_areas() cleanup
Impact: cleanup
__alloc_bootmem and __alloc_bootmem_node do panic
for us in case of fail so no need for additional
checks here.
Also lets use pr_*() macros for printing.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike Travis [Thu, 1 Jan 2009 02:08:48 +0000 (18:08 -0800)]
cpumask: fix compile error when CONFIG_NR_CPUS is not defined
CONFIG_NR_CPUS will be defined for all arch's whether SMP or not, but
it may not have made it into all arches yet.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike Travis [Thu, 1 Jan 2009 02:08:47 +0000 (18:08 -0800)]
cpumask: use alloc_cpumask_var_node where appropriate
Impact: Reduce inter-node memory traffic.
Reduces inter-node memory traffic (offloading the global system bus)
by allocating referenced struct cpumasks on the same node as the
referring struct.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rusty Russell [Thu, 1 Jan 2009 02:08:47 +0000 (18:08 -0800)]
cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
Impact: Reduce memory usage, use new API.
This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS. cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).
(Changes to powernow-k* by <travis>.)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rusty Russell [Thu, 1 Jan 2009 02:08:47 +0000 (18:08 -0800)]
x86: use cpumask_var_t in acpi/boot.c
Impact: reduce stack size, use new API.
Replace cpumask_t with cpumask_var_t.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike Travis [Thu, 1 Jan 2009 02:08:46 +0000 (18:08 -0800)]
x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
Impact: Reduce future system panics due to cpumask operations using NR_CPUS
Insure that code does not look at bits >= nr_cpu_ids as when cpumasks are
allocated based on nr_cpu_ids, these extra bits will not be defined.
Also some other minor updates:
* change in to use cpu accessor function set_cpu_present() instead of
directly accessing cpu_present_map w/cpu_clear() [arch/x86/kernel/reboot.c]
* use cpumask_of() instead of &cpumask_of_cpu() [arch/x86/kernel/reboot.c]
* optimize some cpu_mask_to_apicid_and functions.
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike Travis [Thu, 1 Jan 2009 02:08:45 +0000 (18:08 -0800)]
sched: put back some stack hog changes that were undone in kernel/sched.c
Impact: prevents panic from stack overflow on numa-capable machines.
Some of the "removal of stack hogs" changes in kernel/sched.c by using
node_to_cpumask_ptr were undone by the early cpumask API updates, and
causes a panic due to stack overflow. This patch undoes those changes
by using cpumask_of_node() which returns a 'const struct cpumask *'.
In addition, cpu_coregoup_map is replaced with cpu_coregroup_mask further
reducing stack usage. (Both of these updates removed 9 FIXME's!)
Also:
Pick up some remaining changes from the old 'cpumask_t' functions to
the new 'struct cpumask *' functions.
Optimize memory traffic by allocating each percpu local_cpu_mask on the
same node as the referring cpu.
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike Travis [Thu, 1 Jan 2009 02:08:45 +0000 (18:08 -0800)]
x86: enable cpus display of kernel_max and offlined cpus
Impact: enables /sys/devices/system/cpu/{kernel_max,offline} user interface
By setting total_cpus, the drivers/base/cpu.c will display the
values of kernel_max (NR_CPUS-1) and the offlined cpu map.
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 3 Jan 2009 11:50:46 +0000 (12:50 +0100)]
ia64: cpumask fix for is_affinity_mask_valid()
Impact: build fix on ia64
ia64's default_affinity_write() still had old cpumask_t usage:
/home/mingo/tip/kernel/irq/proc.c: In function `default_affinity_write':
/home/mingo/tip/kernel/irq/proc.c:114: error: incompatible type for argument 1 of `is_affinity_mask_valid'
make[3]: *** [kernel/irq/proc.o] Error 1
make[3]: *** Waiting for unfinished jobs....
update it to cpumask_var_t.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 3 Jan 2009 12:16:09 +0000 (13:16 +0100)]
cpumask: convert RCU implementations, fix
Impact: cleanup
This warning:
kernel/rcuclassic.c: In function ‘rcu_start_batch’:
kernel/rcuclassic.c:397: warning: passing argument 1 of ‘cpumask_andnot’ from incompatible pointer type
triggers because one usage site of rcp->cpumask was not converted
to to_cpumask(rcp->cpumask). There's no ill effects of this bug.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 3 Jan 2009 17:54:51 +0000 (18:54 +0100)]
Merge branch 'master' of git://git./linux/kernel/git/rusty/linux-2.6-cpumask into cpus4096-v2
Mike Travis [Thu, 1 Jan 2009 01:34:16 +0000 (17:34 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask
Conflicts:
arch/x86/kernel/io_apic.c
kernel/rcuclassic.c
kernel/sched.c
kernel/time/tick-sched.c
Signed-off-by: Mike Travis <travis@sgi.com>
[ mingo@elte.hu: backmerged typo fix for io_apic.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Joerg Roedel [Sat, 3 Jan 2009 13:16:35 +0000 (14:16 +0100)]
AMD IOMMU: remove now unnecessary #ifdefs
The #ifdef's are no longer necessary when the iommu-api and the amd
iommu updates are merged together.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Sat, 3 Jan 2009 15:43:44 +0000 (16:43 +0100)]
Merge branches 'iommu/api' and 'iommu/amd' into for-linus
Jaswinder Singh Rajput [Mon, 29 Dec 2008 16:15:22 +0000 (21:45 +0530)]
AMD IOMMU: prealloc_protection_domains should be static
Impact: cleanup, reduce kernel size a bit, avoid sparse warning
Fixes sparse warning:
arch/x86/kernel/amd_iommu.c:1299:6: warning: symbol 'prealloc_protection_domains' was not declared. Should it be static?
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Sat, 3 Jan 2009 15:37:53 +0000 (16:37 +0100)]
kvm/iommu: fix compile warning
This fixes a compile warning about a variable thats maybe used
uninitialized in the function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 15:13:04 +0000 (16:13 +0100)]
AMD IOMMU: add statistics about total number of map requests
Impact: see total number of map requests in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:57:30 +0000 (15:57 +0100)]
AMD IOMMU: add statistics about allocated io memory
Impact: see amount of allocated io memory in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:48:28 +0000 (15:48 +0100)]
AMD IOMMU: add stats counter for domain tlb flushes
Impact: see number of domain tlb flushes in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:46:29 +0000 (15:46 +0100)]
AMD IOMMU: add stats counter for single iommu domain tlb flushes
Impact: see number of single iommu domain tlb flushes in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:42:39 +0000 (15:42 +0100)]
AMD IOMMU: add stats counter for cross-page request
Impact: see number of requests for more than one page in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:16:38 +0000 (15:16 +0100)]
AMD IOMMU: add stats counter for free_coherent requests
Impact: see number of free_coherent requests in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:14:21 +0000 (15:14 +0100)]
AMD IOMMU: add stats counter for alloc_coherent requests
Impact: see number of alloc_coherent requests in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:12:14 +0000 (15:12 +0100)]
AMD IOMMU: add stats counter for unmap_sg requests
Impact: see number of unmap_sg requests in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:09:48 +0000 (15:09 +0100)]
AMD IOMMU: add stats counter for map_sg requests
Impact: see number of map_sg requests in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:07:12 +0000 (15:07 +0100)]
AMD IOMMU: add stats counter for unmap_single requests
Impact: see number of unmap_single requests in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Joerg Roedel [Fri, 12 Dec 2008 14:05:16 +0000 (15:05 +0100)]
AMD IOMMU: add stats counter for map_single requests
Impact: see number of map_single requests in debugfs
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>