efi/libstub: Skip GOP with PIXEL_BLT_ONLY format

commit 540f4c0e894f7e46a66dfa424b16424cbdc12c38 upstream.

The UEFI Specification permits Graphics Output Protocol (GOP) instances
without direct framebuffer access. This is indicated in the Mode structure
with a PixelFormat enumeration value of PIXEL_BLT_ONLY. Given that the
kernel does not know how to drive a Blt() only framebuffer (which is only
permitted before ExitBootServices() anyway), we should disregard such
framebuffers when looking for a GOP instance that is suitable for use as
the boot console.

So modify the EFI GOP initialization to not use a PIXEL_BLT_ONLY instance,
preventing attempts later in boot to use an invalid screen_info.lfb_base
address.

Signed-off-by: Eugene Cohen <eugene@hp.com>
[ Moved the Blt() only check into the loop and clarified that Blt() only GOPs are unusable by the kernel. ]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: lorenzo.pieralisi@arm.com
Fixes: 9822504c1fa5 ("efifb: Enable the efi-framebuffer platform driver ...")
Link: http://lkml.kernel.org/r/20170404152744.26687-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fix bugs in pa_memcpy

commit 409c1b250e30ad0e48b4d15d7319b4e18c046c4f upstream.

The patch 554bfeceb8a22d448cd986fc9efce25e833278a1 ("parisc: Fix access
fault handling in pa_memcpy()") reimplements the pa_memcpy function.
Unfortunatelly, it makes the kernel unbootable. The crash happens in the
function ide_complete_cmd where memcpy is called with the same source
and destination address.

This patch fixes a few bugs in pa_memcpy:

* When jumping to .Lcopy_loop_16 for the first time, don't skip the
  instruction "ldi 31,t0" (this bug made the kernel unbootable)
* Use the COND macro when comparing length, so that the comparison is
  64-bit (a theoretical issue, in case the length is greater than
  0xffffffff)
* Don't use the COND macro after the "extru" instruction (the PA-RISC
  specification says that the upper 32-bits of extru result are undefined,
  although they are set to zero in practice)
* Fix exception addresses in .Lcopy16_fault and .Lcopy8_fault
* Rename .Lcopy_loop_4 to .Lcopy_loop_8 (so that it is consistent with
  .Lcopy8_fault)

Fixes: 554bfeceb8a2 ("parisc: Fix access fault handling in pa_memcpy()")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / scan: Set the visited flag for all enumerated devices

commit f406270bf73d71ea7b35ee3f7a08a44f6594c9b1 upstream.

Commit 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for
bus rescans) attempted to fix a problem with ACPI-based enumerateion
of I2C/SPI devices, but it forgot to ensure that the visited flag
will be set for all of the other enumerated devices, so fix that.

Fixes: 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=194885
Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)

commit b03b99a329a14b7302f37c3ea6da3848db41c8c5 upstream.

While reviewing the -stable patch for commit 86ef58a4e35e "nfit,
libnvdimm: fix interleave set cookie calculation" Ben noted:

    "This is returning an int, thus it's effectively doing a 32-bit
     comparison and not the 64-bit comparison you say is needed."

Update the compare operation to be immune to this integer demotion problem.

Cc: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Fixes: 86ef58a4e35e ("nfit, libnvdimm: fix interleave set cookie calculation")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Plug race between mapping and ELF header setup

commit 6fdc6dd90272ce7e75d744f71535cfbd8d77da81 upstream.

The vsyscall32 sysctl can racy against a concurrent fork when it switches
from disabled to enabled:

    arch_setup_additional_pages()
if (vdso32_enabled)
           --> No mapping
                                        sysctl.vsysscall32()
                                          --> vdso32_enabled = true
    create_elf_tables()
      ARCH_DLINFO_IA32
        if (vdso32_enabled) {
           --> Add VDSO entry with NULL pointer

Make ARCH_DLINFO_IA32 check whether the VDSO mapping has been set up for
the newly forked process or not.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathias Krause <minipli@googlemail.com>
Link: http://lkml.kernel.org/r/20170410151723.602367196@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Ensure vdso32_enabled gets set to valid values only

commit c06989da39cdb10604d572c8c7ea8c8c97f3c483 upstream.

vdso_enabled can be set to arbitrary integer values via the kernel command
line 'vdso32=' parameter or via 'sysctl abi.vsyscall32'.

load_vdso32() only maps VDSO if vdso_enabled == 1, but ARCH_DLINFO_IA32
merily checks for vdso_enabled != 0. As a consequence the AT_SYSINFO_EHDR
auxiliary vector for the VDSO_ENTRY is emitted with a NULL pointer which
causes a segfault when the application tries to use the VDSO.

Restrict the valid arguments on the command line and the sysctl to 0 and 1.

Fixes: b0b49f2673f0 ("x86, vdso: Remove compat vdso support")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Link: http://lkml.kernel.org/r/1491424561-7187-1-git-send-email-minipli@googlemail.com
Link: http://lkml.kernel.org/r/20170410151723.518412863@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions

commit 11e63f6d920d6f2dfd3cd421e939a4aec9a58dcd upstream.

Before we rework the "pmem api" to stop abusing __copy_user_nocache()
for memcpy_to_pmem() we need to fix cases where we may strand dirty data
in the cpu cache. The problem occurs when copy_from_iter_pmem() is used
for arbitrary data transfers from userspace. There is no guarantee that
these transfers, performed by dax_iomap_actor(), will have aligned
destinations or aligned transfer lengths. Backstop the usage
__copy_user_nocache() with explicit cache management in these unaligned
cases.

Yes, copy_from_iter_pmem() is now too big for an inline, but addressing
that is saved for a later patch that moves the entirety of the "pmem
api" into the pmem driver directly.

Fixes: 5de490daec8b ("pmem: add copy_from_iter_pmem() and clear_pmem()")
Cc: <x86@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/signals: Fix lower/upper bound reporting in compat siginfo

commit cfac6dfa42bddfa9711b20d486e521d1a41ab09f upstream.

Put the right values from the original siginfo into the
userspace compat-siginfo.

This fixes the 32-bit MPX "tabletest" testcase on 64-bit kernels.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a4455082dc6f0 ('x86/signals: Add missing signal_compat code for x86 features')
Link: http://lkml.kernel.org/r/1491322501-5054-1-git-send-email-joro@8bytes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/efi: Don't try to reserve runtime regions

commit 6f6266a561306e206e0e31a5038f029b6a7b1d89 upstream.

Reserving a runtime region results in splitting the EFI memory
descriptors for the runtime region. This results in runtime region
descriptors with bogus memory mappings, leading to interesting crashes
like the following during a kexec:

  general protection fault: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1 #53
  Hardware name: Wiwynn Leopard-Orv2/Leopard-DDR BW, BIOS LBM05   09/30/2016
  RIP: 0010:virt_efi_set_variable()
  ...
  Call Trace:
   efi_delete_dummy_variable()
   efi_enter_virtual_mode()
   start_kernel()
   ? set_init_arg()
   x86_64_start_reservations()
   x86_64_start_kernel()
   start_cpu()
  ...
  Kernel panic - not syncing: Fatal exception

Runtime regions will not be freed and do not need to be reserved, so
skip the memmap modification in this case.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 8e80632fb23f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()")
Link: http://lkml.kernel.org/r/20170412152719.9779-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86: Avoid exposing wrong/stale data in intel_pmu_lbr_read_32()

commit f2200ac311302fcdca6556fd0c5127eab6c65a3e upstream.

When the perf_branch_entry::{in_tx,abort,cycles} fields were added,
intel_pmu_lbr_read_32() wasn't updated to initialize them.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 135c5612c460 ("perf/x86/intel: Support Haswell/v4 LBR format")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - add support for Razer Wildcat gamepad

commit 5376366886251e2f8f248704adb620a4bc4c0937 upstream.

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: store results of cifs_reopen_file to avoid infinite wait

commit 1fa839b4986d648b907d117275869a0e46c324b9 upstream.

This fixes Continuous Availability when errors during
file reopen are encountered.

cifs_user_readv and cifs_user_writev would wait for ever if
results of cifs_reopen_file are not stored and for later inspection.

In fact, results are checked and, in case of errors, a chain
of function calls leading to reads and writes to be scheduled in
a separate thread is skipped.
These threads will wake up the corresponding waiters once reads
and writes are done.

However, given the return value is not stored, when rc is checked
for errors a previous one (always zero) is inspected instead.
This leads to pending reads/writes added to the list, making
cifs_user_readv and cifs_user_writev wait for ever.

Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: reconnect thread reschedule itself

commit 18ea43113f5b74a97dd4be9bddbac10d68b1a6ce upstream.

In case of error, smb2_reconnect_server reschedule itself
with a delay, to avoid being too aggressive.

Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit()

commit 45abdf35cf82e4270328c7237e7812de960ac560 upstream.

Add the missing unlock before return from function etnaviv_gpu_submit()
in the error handling case.

lst: fixed label name.

Fixes: f3cd1b064f11 ("drm/etnaviv: (re-)protect fence allocation with GPU mutex")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one

commit f94773b9f5ecd1df7c88c2e921924dd41d2020cc upstream.

The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP
and PCI varieties, rather than a core PCIE chip with a bridge for
AGP/PCI as necessary. As a result, it appears that the MMU is also
non-functional. For AGP cards, the vast majority of the NV4A lineup,
this worked out since we force AGP cards to use the nv04 mmu. However
for PCI variants, this did not work.

Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for
the suggestion. This should be a no-op for NV4A AGP boards, as they were
using it already.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/mpeg: mthd returns true on success now

commit 83bce9c2baa51e439480a713119a73d3c8b61083 upstream.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes: 590801c1a3 ("drm/nouveau/mpeg: remove dependence on namedb/engctx lookup")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: free superblock when mount fails

commit 1ec1688c5360e14dde4094d6acbf7516bf6db37e upstream.

Otherwise lockdep says:

[ 1337.483798] ================================================
[ 1337.483999] [ BUG: lock held when returning to user space! ]
[ 1337.484252] 4.11.0-rc6 #19 Not tainted
[ 1337.484423] ------------------------------------------------
[ 1337.484626] mount/14766 is leaving the kernel with locks still held!
[ 1337.484841] 1 lock held by mount/14766:
[ 1337.485017]  #0:  (&type->s_umount_key#33/1){+.+.+.}, at: [<ffffffff8124171f>] sget_userns+0x2af/0x520

Caught by xfstests generic/413 which tried to mount with the unsupported
mount option dax.  Then xfstests generic/422 ran sync which deadlocks.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Acked-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zsmalloc: expand class bit

commit 85d492f28d056c40629fc25d79f54da618a29dc4 upstream.

Now 64K page system, zsamlloc has 257 classes so 8 class bit is not
enough.  With that, it corrupts the system when zsmalloc stores
65536byte data(ie, index number 256) so that this patch increases class
bit for simple fix for stable backport.  We should clean up this mess
soon.

  index size
  0 32
  1 288
  ..
  ..
  204 52256
  256 65536

Fixes: 3783689a1 ("zsmalloc: introduce zspage structure")
Link: http://lkml.kernel.org/r/1492042622-12074-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thp: fix MADV_DONTNEED vs clear soft dirty race

commit 5b7abeae3af8c08c577e599dd0578b9e3ee6687b upstream.

Yet another instance of the same race.

Fix is identical to change_huge_pmd().

See "thp: fix MADV_DONTNEED vs.  numa balancing race" for more details.

Link: http://lkml.kernel.org/r/20170302151034.27829-5-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thp: fix MADV_DONTNEED vs. MADV_FREE race

commit 58ceeb6bec86d9140f9d91d71a710e963523d063 upstream.

Both MADV_DONTNEED and MADV_FREE handled with down_read(mmap_sem).

It's critical to not clear pmd intermittently while handling MADV_FREE
to avoid race with MADV_DONTNEED:

CPU0: CPU1:
madvise_free_huge_pmd()
 pmdp_huge_get_and_clear_full()
madvise_dontneed()
 zap_pmd_range()
  pmd_trans_huge(*pmd) == 0 (without ptl)
  // skip the pmd
 set_pmd_at();
 // pmd is re-established

It results in MADV_DONTNEED skipping the pmd, leaving it not cleared.
It violates MADV_DONTNEED interface and can result is userspace
misbehaviour.

Basically it's the same race as with numa balancing in
change_huge_pmd(), but a bit simpler to mitigate: we don't need to
preserve dirty/young flags here due to MADV_FREE functionality.

[kirill.shutemov@linux.intel.com: Urgh... Power is special again]
Link: http://lkml.kernel.org/r/20170303102636.bhd2zhtpds4mt62a@black.fi.intel.com
Link: http://lkml.kernel.org/r/20170302151034.27829-4-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcmu: Skip Data-Out blocks before gathering Data-In buffer for BIDI case

commit a5d68ba85801a78c892a0eb8efb711e293ed314b upstream.

For the bidirectional case, the Data-Out buffer blocks will always at
the head of the tcmu_cmd's bitmap, and before gathering the Data-In
buffer, first of all it should skip the Data-Out ones, or the device
supporting BIDI commands won't work.

Fixed: 26418649eead ("target/user: Introduce data_bitmap, replace
data_length/data_head/data_tail")
Reported-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Tested-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcmu: Fix wrongly calculating of the base_command_size

commit abe342a5b4b5aa579f6bf40ba73447c699e6b579 upstream.

The t_data_nents and t_bidi_data_nents are the numbers of the
segments, but it couldn't be sure the block size equals to size
of the segment.

For the worst case, all the blocks are discontiguous and there
will need the same number of iovecs, that's to say: blocks == iovs.
So here just set the number of iovs to block count needed by tcmu
cmd.

Tested-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcmu: Fix possible overwrite of t_data_sg's last iov[]

commit ab22d2604c86ceb01bb2725c9860b88a7dd383bb upstream.

If there has BIDI data, its first iov[] will overwrite the last
iov[] for se_cmd->t_data_sg.

To fix this, we can just increase the iov pointer, but this may
introuduce a new memory leakage bug: If the se_cmd->data_length
and se_cmd->t_bidi_data_sg->length are all not aligned up to the
DATA_BLOCK_SIZE, the actual length needed maybe larger than just
sum of them.

So, this could be avoided by rounding all the data lengthes up
to DATA_BLOCK_SIZE.

Reviewed-by: Mike Christie <mchristi@redhat.com>
Tested-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups

commit 77f88796cee819b9c4562b0b6b44691b3b7755b1 upstream.

Creation of a kthread goes through a couple interlocked stages between
the kthread itself and its creator.  Once the new kthread starts
running, it initializes itself and wakes up the creator.  The creator
then can further configure the kthread and then let it start doing its
job by waking it up.

In this configuration-by-creator stage, the creator is the only one
that can wake it up but the kthread is visible to userland.  When
altering the kthread's attributes from userland is allowed, this is
fine; however, for cases where CPU affinity is critical,
kthread_bind() is used to first disable affinity changes from userland
and then set the affinity.  This also prevents the kthread from being
migrated into non-root cgroups as that can affect the CPU affinity and
many other things.

Unfortunately, the cgroup side of protection is racy.  While the
PF_NO_SETAFFINITY flag prevents further migrations, userland can win
the race before the creator sets the flag with kthread_bind() and put
the kthread in a non-root cgroup, which can lead to all sorts of
problems including incorrect CPU affinity and starvation.

This bug got triggered by userland which periodically tries to migrate
all processes in the root cpuset cgroup to a non-root one.  Per-cpu
workqueue workers got caught while being created and ended up with
incorrected CPU affinity breaking concurrency management and sometimes
stalling workqueue execution.

This patch adds task->no_cgroup_migration which disallows the task to
be migrated by userland.  kthreadd starts with the flag set making
every child kthread start in the root cgroup with migration
disallowed.  The flag is cleared after the kthread finishes
initialization by which time PF_NO_SETAFFINITY is set if the kthread
should stay in the root cgroup.

It'd be better to wait for the initialization instead of failing but I
couldn't think of a way of implementing that without adding either a
new PF flag, or sleeping and retrying from waiting side.  Even if
userland depends on changing cgroup membership of a kthread, it either
has to be synchronized with kthread_create() or periodically repeat,
so it's unlikely that this would break anything.

v2: Switch to a simpler implementation using a new task_struct bit
    field suggested by Oleg.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-and-debugged-by: Chris Mason <clm@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.23

dma-buf: add support for compat ioctl

commit 888022c0473d079bff9b47fb50434b1f20f8f37f upstream.

Add compat ioctl support to dma-buf. This lets one to use DMA_BUF_IOCTL_SYNC
ioctl from 32bit application on 64bit kernel. Data structures for both 32
and 64bit modes are same, so there is no need for additional translation
layer.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487683261-2655-1-git-send-email-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions

commit 7c3945bc2073554bb2ecf983e073dee686679c53 upstream.

Save the qp context flags byte containing the flag disabling vlan stripping
in the RESET to INIT qp transition, rather than in the INIT to RTR
transition. Per the firmware spec, the flags in this byte are active
in the RESET to INIT transition.

As a result of saving the flags in the incorrect qp transition, when
switching dynamically from VGT to VST and back to VGT, the vlan
remained stripped (as is required for VST) and did not return to
not-stripped (as is required for VGT).

Fixes: f0f829bf42cd ("net/mlx4_core: Add immediate activate for VGT->VST->VGT")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Fix racy CQ (Completion Queue) free

commit 291c566a28910614ce42d0ffe82196eddd6346f4 upstream.

In function mlx4_cq_completion() and mlx4_cq_event(), the
radix_tree_lookup requires a rcu_read_lock.
This is mandatory: if another core frees the CQ, it could
run the radix_tree_node_rcu_free() call_rcu() callback while
its being used by the radix tree lookup function.

Additionally, in function mlx4_cq_event(), since we are adding
the rcu lock around the radix-tree lookup, we no longer need to take
the spinlock. Also, the synchronize_irq() call for the async event
eliminates the need for incrementing the cq reference count in
mlx4_cq_event().

Other changes:
1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock:
   we no longer take this spinlock in the interrupt context.
   The spinlock here, therefore, simply protects against different
   threads simultaneously invoking mlx4_cq_free() for different cq's.

2. In function mlx4_cq_free(), we move the radix tree delete to before
   the synchronize_irq() calls. This guarantees that we will not
   access this cq during any subsequent interrupts, and therefore can
   safely free the CQ after the synchronize_irq calls. The rcu_read_lock
   in the interrupt handlers only needs to protect against corrupting the
   radix tree; the interrupt handlers may access the cq outside the
   rcu_read_lock due to the synchronize_irq calls which protect against
   premature freeing of the cq.

3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg.

4. We leave the cq reference count mechanism in place, because it is
   still needed for the cq completion tasklet mechanism.

Fixes: 6d90aa5cf17b ("net/mlx4_core: Make sure there are no pending async events when freeing CQ")
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_en: Fix bad WQE issue

commit 6496bbf0ec481966ef9ffe5b6660d8d1b55c60cc upstream.

Single send WQE in RX buffer should be stamped with software
ownership in order to prevent the flow of QP in error in FW
once UPDATE_QP is called.

Fixes: 9f519f68cfff ('mlx4_en: Not using Shared Receive Queues')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Wait for connection to be reestablished after port reset

commit 22547c4cc4fe20698a6a85a55b8788859134b8e4 upstream.

On a system with a defective USB device connected to an USB hub,
an endless sequence of port connect events was observed. The sequence
of events as observed is as follows:

- Port reports connected event (port status=USB_PORT_STAT_CONNECTION).
- Event handler debounces port and resets it by calling hub_port_reset().
- hub_port_reset() calls hub_port_wait_reset() to wait for the reset
  to complete.
- The reset completes, but USB_PORT_STAT_CONNECTION is not immediately
  set in the port status register.
- hub_port_wait_reset() returns -ENOTCONN.
- Port initialization sequence is aborted.
- A few milliseconds later, the port again reports a connected event,
  and the sequence repeats.

This continues either forever or, randomly, stops if the connection
is already re-established when the port status is read. It results in
a high rate of udev events. This in turn destabilizes userspace since
the above sequence holds the device mutex pretty much continuously
and prevents userspace from actually reading the device status.

To prevent the problem from happening, let's wait for the connection
to be re-established after a port reset. If the device was actually
disconnected, the code will still return an error, but it will do so
only after the long reset timeout.

Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: Avoid memory reclaim when remapping queues

commit 36e1f3d107867b25c616c2fd294f5a1c9d4e5d09 upstream.

While stressing memory and IO at the same time we changed SMT settings,
we were able to consistently trigger deadlocks in the mm system, which
froze the entire machine.

I think that under memory stress conditions, the large allocations
performed by blk_mq_init_rq_map may trigger a reclaim, which stalls
waiting on the block layer remmaping completion, thus deadlocking the
system.  The trace below was collected after the machine stalled,
waiting for the hotplug event completion.

The simplest fix for this is to make allocations in this path
non-reclaimable, with GFP_NOIO.  With this patch, We couldn't hit the
issue anymore.

This should apply on top of Jens's for-next branch cleanly.

Changes since v1:
  - Use GFP_NOIO instead of GFP_NOWAIT.

 Call Trace:
[c000000f0160aaf0] [c000000f0160ab50] 0xc000000f0160ab50 (unreliable)
[c000000f0160acc0] [c000000000016624] __switch_to+0x2e4/0x430
[c000000f0160ad20] [c000000000b1a880] __schedule+0x310/0x9b0
[c000000f0160ae00] [c000000000b1af68] schedule+0x48/0xc0
[c000000f0160ae30] [c000000000b1b4b0] schedule_preempt_disabled+0x20/0x30
[c000000f0160ae50] [c000000000b1d4fc] __mutex_lock_slowpath+0xec/0x1f0
[c000000f0160aed0] [c000000000b1d678] mutex_lock+0x78/0xa0
[c000000f0160af00] [d000000019413cac] xfs_reclaim_inodes_ag+0x33c/0x380 [xfs]
[c000000f0160b0b0] [d000000019415164] xfs_reclaim_inodes_nr+0x54/0x70 [xfs]
[c000000f0160b0f0] [d0000000194297f8] xfs_fs_free_cached_objects+0x38/0x60 [xfs]
[c000000f0160b120] [c0000000003172c8] super_cache_scan+0x1f8/0x210
[c000000f0160b190] [c00000000026301c] shrink_slab.part.13+0x21c/0x4c0
[c000000f0160b2d0] [c000000000268088] shrink_zone+0x2d8/0x3c0
[c000000f0160b380] [c00000000026834c] do_try_to_free_pages+0x1dc/0x520
[c000000f0160b450] [c00000000026876c] try_to_free_pages+0xdc/0x250
[c000000f0160b4e0] [c000000000251978] __alloc_pages_nodemask+0x868/0x10d0
[c000000f0160b6f0] [c000000000567030] blk_mq_init_rq_map+0x160/0x380
[c000000f0160b7a0] [c00000000056758c] blk_mq_map_swqueue+0x33c/0x360
[c000000f0160b820] [c000000000567904] blk_mq_queue_reinit+0x64/0xb0
[c000000f0160b850] [c00000000056a16c] blk_mq_queue_reinit_notify+0x19c/0x250
[c000000f0160b8a0] [c0000000000f5d38] notifier_call_chain+0x98/0x100
[c000000f0160b8f0] [c0000000000c5fb0] __cpu_notify+0x70/0xe0
[c000000f0160b930] [c0000000000c63c4] notify_prepare+0x44/0xb0
[c000000f0160b9b0] [c0000000000c52f4] cpuhp_invoke_callback+0x84/0x250
[c000000f0160ba10] [c0000000000c570c] cpuhp_up_callbacks+0x5c/0x120
[c000000f0160ba60] [c0000000000c7cb8] _cpu_up+0xf8/0x1d0
[c000000f0160bac0] [c0000000000c7eb0] do_cpu_up+0x120/0x150
[c000000f0160bb40] [c0000000006fe024] cpu_subsys_online+0x64/0xe0
[c000000f0160bb90] [c0000000006f5124] device_online+0xb4/0x120
[c000000f0160bbd0] [c0000000006f5244] online_store+0xb4/0xc0
[c000000f0160bc20] [c0000000006f0a68] dev_attr_store+0x68/0xa0
[c000000f0160bc60] [c0000000003ccc30] sysfs_kf_write+0x80/0xb0
[c000000f0160bca0] [c0000000003cbabc] kernfs_fop_write+0x17c/0x250
[c000000f0160bcf0] [c00000000030fe6c] __vfs_write+0x6c/0x1e0
[c000000f0160bd90] [c000000000311490] vfs_write+0xd0/0x270
[c000000f0160bde0] [c0000000003131fc] SyS_write+0x6c/0x110
[c000000f0160be30] [c000000000009204] system_call+0x38/0xec

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Douglas Miller <dougmill@linux.vnet.ibm.com>
Cc: linux-block@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/packet: fix overflow in check for priv area size

commit 2b6867c2ce76c596676bec7d2d525af525fdc6e2 upstream.

Subtracting tp_sizeof_priv from tp_block_size and casting to int
to check whether one is less then the other doesn't always work
(both of them are unsigned ints).

Compare them as is instead.

Also cast tp_sizeof_priv to u64 before using BLK_PLUS_PRIV, as
it can overflow inside BLK_PLUS_PRIV otherwise.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/i915/execlists: Reset RING registers upon resume"

This reverts commit f2a0409a08502d64fbe3990354dff5902b08d2fb which is
commit bafb2f7d4755bf1571bd5e9a03b97f3fc4fe69ae upstream.

It was reported to have problems.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Eric Blau <eblau1@gmail.com>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

crypto: caam - fix invalid dereference in caam_rsa_init_tfm()

commit 33fa46d7b310e06d2cb2ab5417c100af120bfb65 upstream.

In case caam_jr_alloc() fails, ctx->dev carries the error code,
thus accessing it with dev_err() is incorrect.

Fixes: 8c419778ab57e ("crypto: caam - add support for RSA algorithm")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - fix RNG deinstantiation error checking

commit 40c98cb57cdbc377456116ad4582c89e329721b0 upstream.

RNG instantiation was previously fixed by
commit 62743a4145bb9 ("crypto: caam - fix RNG init descriptor ret. code checking")
while deinstantiation was not addressed.

Since the descriptors used are similar, in the sense that they both end
with a JUMP HALT command, checking for errors should be similar too,
i.e. status code 7000_0000h should be considered successful.

Fixes: 1005bccd7a4a6 ("crypto: caam - enable instantiation of all RNG4 state handles")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch

commit c25f8064c1d5731a2ce5664def890140dcdd3e5c upstream.

Commit dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts")
changed both the normal and vectored interrupt handlers. Unfortunately
the vectored version, "except_vec_vi_handler", was incorrectly modified
to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to
the vectored handler that has been set up. This is ok for many platforms
which set the vectored handler to plat_irq_dispatch anyway, but will
cause problems with platforms that use other handlers.

Fixes: dda45f701c9d ("MIPS: Switch to the irq_stack in interrupts")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15110/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Select HAVE_IRQ_EXIT_ON_IRQ_STACK

commit 3cc3434fd6307d06b53b98ce83e76bf9807689b9 upstream.

Since do_IRQ is now invoked on a separate IRQ stack, we select
HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly
from irq_exit(), rather than requiring do_softirq_own_stack.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14744/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Switch to the irq_stack in interrupts

commit dda45f701c9d7ad4ac0bb446e3a96f6df9a468d9 upstream.

When enterring interrupt context via handle_int or except_vec_vi, switch
to the irq_stack of the current CPU if it is not already in use.

The current stack pointer is masked with the thread size and compared to
the base or the irq stack. If it does not match then the stack pointer
is set to the top of that stack, otherwise this is a nested irq being
handled on the irq stack so the stack pointer should be left as it was.

The in-use stack pointer is placed in the callee saved register s1. It
will be saved to the stack when plat_irq_dispatch is invoked and can be
restored once control returns here.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14743/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Only change $28 to thread_info if coming from user mode

commit 510d86362a27577f5ee23f46cfb354ad49731e61 upstream.

The SAVE_SOME macro is used to save the execution context on all
exceptions.
If an exception occurs while executing user code, the stack is switched
to the kernel's stack for the current task, and register $28 is switched
to point to the current_thread_info, which is at the bottom of the stack
region.
If the exception occurs while executing kernel code, the stack is left,
and this change ensures that register $28 is not updated. This is the
correct behaviour when the kernel can be executing on the separate irq
stack, because the thread_info will not be at the base of it.

With this change, register $28 is only switched to it's kernel
conventional usage of the currrent thread info pointer at the point at
which execution enters kernel space. Doing it on every exception was
redundant, but OK without an IRQ stack, but will be erroneous once that
is introduced.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14742/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Stack unwinding while on IRQ stack

commit d42d8d106b0275b027c1e8992c42aecf933436ea upstream.

Within unwind stack, check if the stack pointer being unwound is within
the CPU's irq_stack and if so use that page rather than the task's stack
page.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14741/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Introduce irq_stack

commit fe8bd18ffea5327344d4ec2bf11f47951212abd0 upstream.

Allocate a per-cpu irq stack for use within interrupt handlers.

Also add a utility function on_irq_stack to determine if a given stack
pointer is within the irq stack for that cpu.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14740/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: bcm47xxpart: fix parsing first block after aligned TRX

commit bd5d21310133921021d78995ad6346f908483124 upstream.

After parsing TRX we should skip to the first block placed behind it.
Our code was working only with TRX with length not aligned to the
blocksize. In other cases (length aligned) it was missing the block
places right after TRX.

This fixes calculation and simplifies the comment.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: Fix incorrect usage of CONFIG_RT2X00_LIB_USB

commit a083c8fd277b4122c804f18ec8c84165f345c71c upstream.

In device removal routine, usage of "#ifdef CONFIG_RT2X00_LIB_USB"
will not cover the case when it is configured as module. This will
omit the entire if-block which does cleanup of URBs and cancellation
of pending work. Changing the #ifdef to #if IS_ENABLED() to fix it.

Signed-off-by: Vishal Thanki <vishalthanki@gmail.com>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00usb: do not anchor rx and tx urb's

commit 93c7018ec16bb83399dd4db61c361a6d6aba0d5a upstream.

We might kill TX or RX urb during rt2x00usb_flush_entry(), what can
cause anchor list corruption like shown below:

[ 2074.035633] WARNING: CPU: 2 PID: 14480 at lib/list_debug.c:33 __list_add+0xac/0xc0
[ 2074.035634] list_add corruption. prev->next should be next (ffff88020f362c28), but was dead000000000100. (prev=ffff8801d161bb70).
<snip>
[ 2074.035670] Call Trace:
[ 2074.035672]  [<ffffffff813bde47>] dump_stack+0x63/0x8c
[ 2074.035674]  [<ffffffff810a2231>] __warn+0xd1/0xf0
[ 2074.035676]  [<ffffffff810a22af>] warn_slowpath_fmt+0x5f/0x80
[ 2074.035678]  [<ffffffffa073855d>] ? rt2x00usb_register_write_lock+0x3d/0x60 [rt2800usb]
[ 2074.035679]  [<ffffffff813dbe4c>] __list_add+0xac/0xc0
[ 2074.035681]  [<ffffffff81591c6c>] usb_anchor_urb+0x4c/0xa0
[ 2074.035683]  [<ffffffffa07322af>] rt2x00usb_kick_rx_entry+0xaf/0x100 [rt2x00usb]
[ 2074.035684]  [<ffffffffa0732322>] rt2x00usb_clear_entry+0x22/0x30 [rt2x00usb]

To fix do not anchor TX and RX urb's, it is not needed as during
shutdown we kill those urbs in rt2x00usb_free_entries().

Cc: Vishal Thanki <vishalthanki@gmail.com>
Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00usb: fix anchor initialization

commit 0488a6121dfe6cbd44de15ea3627913b7549a1e9 upstream.

If device fail to initialize we can OOPS in rt2x00lib_remove_dev(), due
to using uninitialized usb_anchor structure:

[  855.435820] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  855.435826] ieee80211 phy3: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  855.435829] ieee80211 phy3: rt2x00lib_probe_dev: Error - Failed to allocate device
[  855.435845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[  855.435900] IP: _raw_spin_lock_irq+0xd/0x30
[  855.435926] PGD 0
[  855.435953] Oops: 0002 [#1] SMP
<snip>
[  855.437011] Call Trace:
[  855.437029]  ? usb_kill_anchored_urbs+0x27/0xc0
[  855.437061]  rt2x00lib_remove_dev+0x190/0x1c0 [rt2x00lib]
[  855.437097]  rt2x00lib_probe_dev+0x246/0x7a0 [rt2x00lib]
[  855.437149]  ? ieee80211_roc_setup+0x9e/0xd0 [mac80211]
[  855.437183]  ? __kmalloc+0x1af/0x1f0
[  855.437207]  ? rt2x00usb_probe+0x13d/0xc50 [rt2x00usb]
[  855.437240]  rt2x00usb_probe+0x155/0xc50 [rt2x00usb]
[  855.437273]  rt2800usb_probe+0x15/0x20 [rt2800usb]
[  855.437304]  usb_probe_interface+0x159/0x2d0
[  855.437333]  driver_probe_device+0x2bb/0x460

Patch changes initialization sequence to fix the problem.

Cc: Vishal Thanki <vishalthanki@gmail.com>
Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: bcm2835: Fix hang for writing messages larger than 16 bytes

commit e2474541032db65d02bf88b6a8c2f954654b443f upstream.

Writing messages larger than the FIFO size results in a hang, rendering
the machine unusable. This is because the RXD status flag is set on the
first interrupt which results in bcm2835_drain_rxfifo() stealing bytes
from the buffer. The controller continues to trigger interrupts waiting
for the missing bytes, but bcm2835_fill_txfifo() has none to give.
In this situation wait_for_completion_timeout() apparently is unable to
stop the madness.

The BCM2835 ARM Peripherals datasheet has this to say about the flags:
  TXD: is set when the FIFO has space for at least one byte of data.
  RXD: is set when the FIFO contains at least one byte of data.
  TXW: is set during a write transfer and the FIFO is less than full.
  RXR: is set during a read transfer and the FIFO is or more full.

Implementing the logic from the downstream i2c-bcm2708 driver solved
the hang problem.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: fix buffer size mis-match between kernel space and user space.

commit eb68d0324dc4d88ab0d6159bdcd98c247a3a8954 upstream.

The deamon through which the kernel module communicates with the userspace
part of Orangefs, the "client-core", sends initialization data to the
kernel module with ioctl. The initialization data was built by the
client-core in a 2k buffer and copy_from_user'd into a 1k buffer
in the kernel module. When more than 1k of initialization data needed
to be sent, some was lost, reducing the usability of the control by which
debug levels are set. This patch sets the kernel side buffer to 2K to
match the userspace side...

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: Dan Carpenter influenced cleanups...

commit 05973c2efb40122f2a9ecde2d065f7ea5068d024 upstream.

This patch is simlar to one Dan Carpenter sent me, cleans
up some return codes and whitespace errors. There was one
place where he thought inserting an error message into
the ring buffer might be too chatty, I hope I convinced him
othewise. As a consolation <g> I changed a truly chatty
error message in another location into a debug message,
system-admins had already yelled at me about that one...

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

orangefs: fix memory leak of string 'new' on exit path

commit 4defb5f912a0ba60e07e91a4b62634814cd99b7f upstream.

allocates string 'new' is not free'd on the exit path when
cdm_element_count <= 0. Fix this by kfree'ing it.

Fixes CoverityScan CID#1375923 "Resource Leak"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)

commit 3d3d18f086cdda72ee18a454db70ca72c6e3246c upstream.

The rcu_barrier() takes the cpu_hotplug mutex which itself is not
reclaim-safe, and so rcu_barrier() is illegal from inside the shrinker.

[  309.661373] =========================================================
[  309.661376] [ INFO: possible irq lock inversion dependency detected ]
[  309.661380] 4.11.0-rc1-CI-CI_DRM_2333+ #1 Tainted: G        W
[  309.661383] ---------------------------------------------------------
[  309.661386] gem_exec_gttfil/6435 just changed the state of lock:
[  309.661389]  (rcu_preempt_state.barrier_mutex){+.+.-.}, at: [<ffffffff81100731>] _rcu_barrier+0x31/0x160
[  309.661399] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[  309.661402]  (cpu_hotplug.lock){+.+.+.}
[  309.661404]

               and interrupts could create inverse lock ordering between them.

[  309.661410]
               other info that might help us debug this:
[  309.661414]  Possible interrupt unsafe locking scenario:

[  309.661417]        CPU0                    CPU1
[  309.661419]        ----                    ----
[  309.661421]   lock(cpu_hotplug.lock);
[  309.661425]                                local_irq_disable();
[  309.661432]                                lock(rcu_preempt_state.barrier_mutex);
[  309.661441]                                lock(cpu_hotplug.lock);
[  309.661446]   <Interrupt>
[  309.661448]     lock(rcu_preempt_state.barrier_mutex);
[  309.661453]
                *** DEADLOCK ***

[  309.661460] 4 locks held by gem_exec_gttfil/6435:
[  309.661464]  #0:  (sb_writers#10){.+.+.+}, at: [<ffffffff8120d83d>] vfs_write+0x17d/0x1f0
[  309.661475]  #1:  (debugfs_srcu){......}, at: [<ffffffff81320491>] debugfs_use_file_start+0x41/0xa0
[  309.661486]  #2:  (&attr->mutex){+.+.+.}, at: [<ffffffff8123a3e7>] simple_attr_write+0x37/0xe0
[  309.661495]  #3:  (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0091b4a>] i915_drop_caches_set+0x3a/0x150 [i915]
[  309.661540]
               the shortest dependencies between 2nd lock and 1st lock:
[  309.661547]  -> (cpu_hotplug.lock){+.+.+.} ops: 829 {
[  309.661553]     HARDIRQ-ON-W at:
[  309.661560]                       __lock_acquire+0x5e5/0x1b50
[  309.661565]                       lock_acquire+0xc9/0x220
[  309.661572]                       __mutex_lock+0x6e/0x990
[  309.661576]                       mutex_lock_nested+0x16/0x20
[  309.661583]                       get_online_cpus+0x61/0x80
[  309.661590]                       kmem_cache_create+0x25/0x1d0
[  309.661596]                       debug_objects_mem_init+0x30/0x249
[  309.661602]                       start_kernel+0x341/0x3fe
[  309.661607]                       x86_64_start_reservations+0x2a/0x2c
[  309.661612]                       x86_64_start_kernel+0x173/0x186
[  309.661619]                       verify_cpu+0x0/0xfc
[  309.661622]     SOFTIRQ-ON-W at:
[  309.661627]                       __lock_acquire+0x611/0x1b50
[  309.661632]                       lock_acquire+0xc9/0x220
[  309.661636]                       __mutex_lock+0x6e/0x990
[  309.661641]                       mutex_lock_nested+0x16/0x20
[  309.661646]                       get_online_cpus+0x61/0x80
[  309.661650]                       kmem_cache_create+0x25/0x1d0
[  309.661655]                       debug_objects_mem_init+0x30/0x249
[  309.661660]                       start_kernel+0x341/0x3fe
[  309.661664]                       x86_64_start_reservations+0x2a/0x2c
[  309.661669]                       x86_64_start_kernel+0x173/0x186
[  309.661674]                       verify_cpu+0x0/0xfc
[  309.661677]     RECLAIM_FS-ON-W at:
[  309.661682]                          mark_held_locks+0x6f/0xa0
[  309.661687]                          lockdep_trace_alloc+0xb3/0x100
[  309.661693]                          kmem_cache_alloc_trace+0x31/0x2e0
[  309.661699]                          __smpboot_create_thread.part.1+0x27/0xe0
[  309.661704]                          smpboot_create_threads+0x61/0x90
[  309.661709]                          cpuhp_invoke_callback+0x9c/0x8a0
[  309.661713]                          cpuhp_up_callbacks+0x31/0xb0
[  309.661718]                          _cpu_up+0x7a/0xc0
[  309.661723]                          do_cpu_up+0x5f/0x80
[  309.661727]                          cpu_up+0xe/0x10
[  309.661734]                          smp_init+0x71/0xb3
[  309.661738]                          kernel_init_freeable+0x94/0x19e
[  309.661743]                          kernel_init+0x9/0xf0
[  309.661748]                          ret_from_fork+0x2e/0x40
[  309.661752]     INITIAL USE at:
[  309.661757]                      __lock_acquire+0x234/0x1b50
[  309.661761]                      lock_acquire+0xc9/0x220
[  309.661766]                      __mutex_lock+0x6e/0x990
[  309.661771]                      mutex_lock_nested+0x16/0x20
[  309.661775]                      get_online_cpus+0x61/0x80
[  309.661780]                      __cpuhp_setup_state+0x44/0x170
[  309.661785]                      page_alloc_init+0x23/0x3a
[  309.661790]                      start_kernel+0x124/0x3fe
[  309.661794]                      x86_64_start_reservations+0x2a/0x2c
[  309.661799]                      x86_64_start_kernel+0x173/0x186
[  309.661804]                      verify_cpu+0x0/0xfc
[  309.661807]   }
[  309.661813]   ... key      at: [<ffffffff81e37690>] cpu_hotplug+0xb0/0x100
[  309.661817]   ... acquired at:
[  309.661821]    lock_acquire+0xc9/0x220
[  309.661825]    __mutex_lock+0x6e/0x990
[  309.661829]    mutex_lock_nested+0x16/0x20
[  309.661833]    get_online_cpus+0x61/0x80
[  309.661837]    _rcu_barrier+0x9f/0x160
[  309.661841]    rcu_barrier+0x10/0x20
[  309.661847]    netdev_run_todo+0x5f/0x310
[  309.661852]    rtnl_unlock+0x9/0x10
[  309.661856]    default_device_exit_batch+0x133/0x150
[  309.661862]    ops_exit_list.isra.0+0x4d/0x60
[  309.661866]    cleanup_net+0x1d8/0x2c0
[  309.661872]    process_one_work+0x1f4/0x6d0
[  309.661876]    worker_thread+0x49/0x4a0
[  309.661881]    kthread+0x107/0x140
[  309.661884]    ret_from_fork+0x2e/0x40

[  309.661890] -> (rcu_preempt_state.barrier_mutex){+.+.-.} ops: 179 {
[  309.661896]    HARDIRQ-ON-W at:
[  309.661901]                     __lock_acquire+0x5e5/0x1b50
[  309.661905]                     lock_acquire+0xc9/0x220
[  309.661910]                     __mutex_lock+0x6e/0x990
[  309.661914]                     mutex_lock_nested+0x16/0x20
[  309.661919]                     _rcu_barrier+0x31/0x160
[  309.661923]                     rcu_barrier+0x10/0x20
[  309.661928]                     netdev_run_todo+0x5f/0x310
[  309.661932]                     rtnl_unlock+0x9/0x10
[  309.661936]                     default_device_exit_batch+0x133/0x150
[  309.661941]                     ops_exit_list.isra.0+0x4d/0x60
[  309.661946]                     cleanup_net+0x1d8/0x2c0
[  309.661951]                     process_one_work+0x1f4/0x6d0
[  309.661955]                     worker_thread+0x49/0x4a0
[  309.661960]                     kthread+0x107/0x140
[  309.661964]                     ret_from_fork+0x2e/0x40
[  309.661968]    SOFTIRQ-ON-W at:
[  309.661972]                     __lock_acquire+0x611/0x1b50
[  309.661977]                     lock_acquire+0xc9/0x220
[  309.661981]                     __mutex_lock+0x6e/0x990
[  309.661986]                     mutex_lock_nested+0x16/0x20
[  309.661990]                     _rcu_barrier+0x31/0x160
[  309.661995]                     rcu_barrier+0x10/0x20
[  309.661999]                     netdev_run_todo+0x5f/0x310
[  309.662003]                     rtnl_unlock+0x9/0x10
[  309.662008]                     default_device_exit_batch+0x133/0x150
[  309.662013]                     ops_exit_list.isra.0+0x4d/0x60
[  309.662017]                     cleanup_net+0x1d8/0x2c0
[  309.662022]                     process_one_work+0x1f4/0x6d0
[  309.662027]                     worker_thread+0x49/0x4a0
[  309.662031]                     kthread+0x107/0x140
[  309.662035]                     ret_from_fork+0x2e/0x40
[  309.662039]    IN-RECLAIM_FS-W at:
[  309.662043]                        __lock_acquire+0x638/0x1b50
[  309.662048]                        lock_acquire+0xc9/0x220
[  309.662053]                        __mutex_lock+0x6e/0x990
[  309.662058]                        mutex_lock_nested+0x16/0x20
[  309.662062]                        _rcu_barrier+0x31/0x160
[  309.662067]                        rcu_barrier+0x10/0x20
[  309.662089]                        i915_gem_shrink_all+0x33/0x40 [i915]
[  309.662109]                        i915_drop_caches_set+0x141/0x150 [i915]
[  309.662114]                        simple_attr_write+0xc7/0xe0
[  309.662119]                        full_proxy_write+0x4f/0x70
[  309.662124]                        __vfs_write+0x23/0x120
[  309.662128]                        vfs_write+0xc6/0x1f0
[  309.662133]                        SyS_write+0x44/0xb0
[  309.662138]                        entry_SYSCALL_64_fastpath+0x1c/0xb1
[  309.662142]    INITIAL USE at:
[  309.662147]                    __lock_acquire+0x234/0x1b50
[  309.662151]                    lock_acquire+0xc9/0x220
[  309.662156]                    __mutex_lock+0x6e/0x990
[  309.662160]                    mutex_lock_nested+0x16/0x20
[  309.662165]                    _rcu_barrier+0x31/0x160
[  309.662169]                    rcu_barrier+0x10/0x20
[  309.662174]                    netdev_run_todo+0x5f/0x310
[  309.662178]                    rtnl_unlock+0x9/0x10
[  309.662183]                    default_device_exit_batch+0x133/0x150
[  309.662188]                    ops_exit_list.isra.0+0x4d/0x60
[  309.662192]                    cleanup_net+0x1d8/0x2c0
[  309.662197]                    process_one_work+0x1f4/0x6d0
[  309.662202]                    worker_thread+0x49/0x4a0
[  309.662206]                    kthread+0x107/0x140
[  309.662210]                    ret_from_fork+0x2e/0x40
[  309.662214]  }
[  309.662220]  ... key      at: [<ffffffff81e4e1c8>] rcu_preempt_state+0x508/0x780
[  309.662225]  ... acquired at:
[  309.662229]    check_usage_forwards+0x12b/0x130
[  309.662233]    mark_lock+0x360/0x6f0
[  309.662237]    __lock_acquire+0x638/0x1b50
[  309.662241]    lock_acquire+0xc9/0x220
[  309.662245]    __mutex_lock+0x6e/0x990
[  309.662249]    mutex_lock_nested+0x16/0x20
[  309.662253]    _rcu_barrier+0x31/0x160
[  309.662257]    rcu_barrier+0x10/0x20
[  309.662279]    i915_gem_shrink_all+0x33/0x40 [i915]
[  309.662298]    i915_drop_caches_set+0x141/0x150 [i915]
[  309.662303]    simple_attr_write+0xc7/0xe0
[  309.662307]    full_proxy_write+0x4f/0x70
[  309.662311]    __vfs_write+0x23/0x120
[  309.662315]    vfs_write+0xc6/0x1f0
[  309.662319]    SyS_write+0x44/0xb0
[  309.662323]    entry_SYSCALL_64_fastpath+0x1c/0xb1

[  309.662329]
               stack backtrace:
[  309.662335] CPU: 1 PID: 6435 Comm: gem_exec_gttfil Tainted: G        W       4.11.0-rc1-CI-CI_DRM_2333+ #1
[  309.662342] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
[  309.662348] Call Trace:
[  309.662354]  dump_stack+0x67/0x92
[  309.662359]  print_irq_inversion_bug.part.19+0x1a4/0x1b0
[  309.662365]  check_usage_forwards+0x12b/0x130
[  309.662369]  mark_lock+0x360/0x6f0
[  309.662374]  ? print_shortest_lock_dependencies+0x1a0/0x1a0
[  309.662379]  __lock_acquire+0x638/0x1b50
[  309.662383]  ? __mutex_unlock_slowpath+0x3e/0x2e0
[  309.662388]  ? trace_hardirqs_on+0xd/0x10
[  309.662392]  ? _rcu_barrier+0x31/0x160
[  309.662396]  lock_acquire+0xc9/0x220
[  309.662400]  ? _rcu_barrier+0x31/0x160
[  309.662404]  ? _rcu_barrier+0x31/0x160
[  309.662409]  __mutex_lock+0x6e/0x990
[  309.662412]  ? _rcu_barrier+0x31/0x160
[  309.662416]  ? _rcu_barrier+0x31/0x160
[  309.662421]  ? synchronize_rcu_expedited+0x35/0xb0
[  309.662426]  ? _raw_spin_unlock_irqrestore+0x52/0x60
[  309.662434]  mutex_lock_nested+0x16/0x20
[  309.662438]  _rcu_barrier+0x31/0x160
[  309.662442]  rcu_barrier+0x10/0x20
[  309.662464]  i915_gem_shrink_all+0x33/0x40 [i915]
[  309.662484]  i915_drop_caches_set+0x141/0x150 [i915]
[  309.662489]  simple_attr_write+0xc7/0xe0
[  309.662494]  full_proxy_write+0x4f/0x70
[  309.662498]  __vfs_write+0x23/0x120
[  309.662503]  ? rcu_read_lock_sched_held+0x75/0x80
[  309.662507]  ? rcu_sync_lockdep_assert+0x2a/0x50
[  309.662512]  ? __sb_start_write+0x102/0x210
[  309.662516]  ? vfs_write+0x17d/0x1f0
[  309.662520]  vfs_write+0xc6/0x1f0
[  309.662524]  ? trace_hardirqs_on_caller+0xe7/0x200
[  309.662529]  SyS_write+0x44/0xb0
[  309.662533]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  309.662537] RIP: 0033:0x7f507eac24a0
[  309.662541] RSP: 002b:00007fffda8720e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  309.662548] RAX: ffffffffffffffda RBX: ffffffff81482bd3 RCX: 00007f507eac24a0
[  309.662552] RDX: 0000000000000005 RSI: 00007fffda8720f0 RDI: 0000000000000005
[  309.662557] RBP: ffffc9000048bf88 R08: 0000000000000000 R09: 000000000000002c
[  309.662561] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fffda872230
[  309.662566] R13: 00007fffda872228 R14: 0000000000000201 R15: 00007fffda8720f0
[  309.662572]  ? __this_cpu_preempt_check+0x13/0x20

Fixes: 0eafec6d3244 ("drm/i915: Enable lockless lookup of request tracking via RCU")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100192
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314115019.18127-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit bd784b7cc41af7a19cfb705fa6d800e511c4ab02)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321144531.12344-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Stop using RP_DOWN_EI on Baytrail

commit 8f68d591d4765b2e1ce9d916ac7bc5583285c4ad upstream.

On Baytrail, we manually calculate busyness over the evaluation interval
to avoid issues with miscaluations with RC6 enabled. However, it turns
out that the DOWN_EI interrupt generator is completely bust - it
operates in two modes, continuous or never. Neither of which are
conducive to good behaviour. Stop unmask the DOWN_EI interrupt and just
compute everything from the UP_EI which does seem to correspond to the
desired interval.

v2: Fixup gen6_rps_pm_mask() as well
v3: Inline vlv_c0_above() to combine the now identical elapsed
calculation for up/down and simplify the threshold testing

Fixes: 43cf3bf084ba ("drm/i915: Improved w/a for rps on Baytrail")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170309211232.28878-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170617.31564-1-chris@chris-wilson.co.uk
(cherry picked from commit e0e8c7cb6eb68e9256de2d8cbeb481d3701c05ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Drop support for I915_EXEC_CONSTANTS_* execbuf parameters.

commit 0f5418e564ac6452b9086295646e602a9addc4bf upstream.

This patch makes the I915_PARAM_HAS_EXEC_CONSTANTS getparam return 0
(indicating the optional feature is not supported), and makes execbuf
always return -EINVAL if the flags are used.

Apparently, no userspace ever shipped which used this optional feature:
I checked the git history of Mesa, xf86-video-intel, libva, and Beignet,
and there were zero commits showing a use of these flags.  Kernel commit
72bfa19c8deb4 apparently introduced the feature prematurely.  According
to Chris, the intention was to use this in cairo-drm, but "the use was
broken for gen6", so I don't think it ever happened.

'relative_constants_mode' has always been tracked per-device, but this
has actually been wrong ever since hardware contexts were introduced, as
the INSTPM register is saved (and automatically restored) as part of the
render ring context. The software per-device value could therefore get
out of sync with the hardware per-context value.  This meant that using
them is actually unsafe: a client which tried to use them could damage
the state of other clients, causing the GPU to interpret their BO
offsets as absolute pointers, leading to bogus memory reads.

These flags were also never ported to execlist mode, making them no-ops
on Gen9+ (which requires execlists), and Gen8 in the default mode.

On Gen8+, userspace can write these registers directly, achieving the
same effect.  On Gen6-7.5, it likely makes sense to extend the command
parser to support them.  I don't think anyone wants this on Gen4-5.

Based on a patch by Dave Gordon.

v3: Return -ENODEV for the getparam, as this is what we do for other
    obsolete features.  Suggested by Chris Wilson.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92448
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215093446.21291-1-kenneth@whitecape.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170433.26843-1-chris@chris-wilson.co.uk
(cherry picked from commit ef0f411f51475f4eebf9fc1b19a85be698af19ff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Only enable hotplug interrupts if the display interrupts are enabled

commit 35a3abfd198e6c69a6644784bb09a2d951fc6b21 upstream.

In order to prevent accessing the hpd registers outside of the display
power wells, we should refrain from writing to the registers before the
display interrupts are enabled.

[    4.740136] WARNING: CPU: 1 PID: 221 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x44/0x50 [i915]
[    4.740155] Unclaimed read from register 0x1e1110
[    4.740168] Modules linked in: i915(+) intel_gtt drm_kms_helper prime_numbers
[    4.740190] CPU: 1 PID: 221 Comm: systemd-udevd Not tainted 4.10.0-rc6+ #384
[    4.740203] Hardware name:                  /        , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[    4.740220] Call Trace:
[    4.740236]  dump_stack+0x4d/0x6f
[    4.740251]  __warn+0xc1/0xe0
[    4.740265]  warn_slowpath_fmt+0x4a/0x50
[    4.740281]  ? insert_work+0x77/0xc0
[    4.740355]  ? fwtable_write32+0x90/0x130 [i915]
[    4.740431]  __unclaimed_reg_debug+0x44/0x50 [i915]
[    4.740507]  fwtable_read32+0xd8/0x130 [i915]
[    4.740575]  i915_hpd_irq_setup+0xa5/0x100 [i915]
[    4.740649]  intel_hpd_init+0x68/0x80 [i915]
[    4.740716]  i915_driver_load+0xe19/0x1380 [i915]
[    4.740784]  i915_pci_probe+0x32/0x90 [i915]
[    4.740799]  pci_device_probe+0x8b/0xf0
[    4.740815]  driver_probe_device+0x2b6/0x450
[    4.740828]  __driver_attach+0xda/0xe0
[    4.740841]  ? driver_probe_device+0x450/0x450
[    4.740853]  bus_for_each_dev+0x5b/0x90
[    4.740865]  driver_attach+0x19/0x20
[    4.740878]  bus_add_driver+0x166/0x260
[    4.740892]  driver_register+0x5b/0xd0
[    4.740906]  ? 0xffffffffa0166000
[    4.740920]  __pci_register_driver+0x47/0x50
[    4.740985]  i915_init+0x5c/0x5e [i915]
[    4.740999]  do_one_initcall+0x3e/0x160
[    4.741015]  ? __vunmap+0x7c/0xc0
[    4.741029]  ? kmem_cache_alloc+0xcf/0x120
[    4.741045]  do_init_module+0x55/0x1c4
[    4.741060]  load_module+0x1f3f/0x25b0
[    4.741073]  ? __symbol_put+0x40/0x40
[    4.741086]  ? kernel_read_file+0x100/0x190
[    4.741100]  SYSC_finit_module+0xbc/0xf0
[    4.741112]  SyS_finit_module+0x9/0x10
[    4.741125]  entry_SYSCALL_64_fastpath+0x17/0x98
[    4.741135] RIP: 0033:0x7f8559a140f9
[    4.741145] RSP: 002b:00007fff7509a3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    4.741161] RAX: ffffffffffffffda RBX: 00007f855aba02d1 RCX: 00007f8559a140f9
[    4.741172] RDX: 0000000000000000 RSI: 000055b6db0914f0 RDI: 0000000000000011
[    4.741183] RBP: 0000000000020000 R08: 0000000000000000 R09: 000000000000000e
[    4.741193] R10: 0000000000000011 R11: 0000000000000246 R12: 000055b6db0854d0
[    4.741204] R13: 000055b6db091150 R14: 0000000000000000 R15: 000055b6db035924

v2: Set dev_priv->display_irqs_enabled to true for all platforms other
than vlv/chv that manually control the display power domain.

Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215131547.5064-1-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170313170231.18633-1-chris@chris-wilson.co.uk
(cherry picked from commit 262fd485ac6b476479f41f00bb104f6a1766ae66)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3

commit 34dc8993eef63681b062871413a9484008a2a78f upstream.

Certain Baytrails, namely the 4 cpu core variants, have been
plaqued by spurious system hangs, mostly occurring with light loads.

Multiple bisects by various people point to a commit which changes the
reclocking strategy for Baytrail to follow its bigger brethen:
commit 8fb55197e64d ("drm/i915: Agressive downclocking on Baytrail")

There is also a review comment attached to this commit from Deepak S
on avoiding punit access on Cherryview and thus it was excluded on
common reclocking path. By taking the same approach and omitting
the punit access by not tweaking the thresholds when the hardware
has been asked to move into different frequency, considerable gains
in stability have been observed.

With J1900 box, light render/video load would end up in system hang
in usually less than 12 hours. With this patch applied, the cumulative
uptime has now been 34 days without issues. To provoke system hang,
light loads on both render and bsd engines in parallel have been used:
glxgears >/dev/null 2>/dev/null &
mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4

So far, author has not witnessed system hang with above load
and this patch applied. Reports from the tenacious people at
kernel bugzilla are also promising.

Considering that the punit access frequency with this patch is
considerably less, there is a possibility that this will push
the, still unknown, root cause past the triggering point on most loads.

But as we now can reliably reproduce the hang independently,
we can reduce the pain that users are having and use a
static thresholds until a root cause is found.

v3: don't break debugfs and simplification (Chris Wilson)

References: https://bugzilla.kernel.org/show_bug.cgi?id=109051
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: fritsch@xbmc.org
Cc: miku@iki.fi
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
CC: Michal Feix <michal@feix.cz>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487166779-26945-1-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 6067a27d1f0184596d51decbac1c1fdc4acb012f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Nuke debug messages from the pipe update critical section

commit edd06b8353772dca7afcd4640dafa83b521edd55 upstream.

printks are slow so we should not be doing them from the vblank evade
critical section. These could explain why we sometimes seem to
blow past our 100 usec deadline.

The problem has been there ever since commit bfd16b2a23dc ("drm/i915:
Make updating pipe without modeset atomic.") but it may not have
been readily visible until commit e1edbd44e23b ("drm/i915: Complain
if we take too long under vblank evasion.") increased our chances
of noticing it.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: bfd16b2a23dc ("drm/i915: Make updating pipe without modeset atomic.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170307205419.19447-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit c3f8ad57a01a31397e5a0349a226a32f35ddc19c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gen9: Increase PCODE request timeout to 50ms

commit d253371c4c2f5fc2d884ef25f64decd7549aff5a upstream.

After
commit 2c7d0602c815277f7cb7c932b091288710d8aba7
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon Dec 5 18:27:37 2016 +0200

    drm/i915/gen9: Fix PCODE polling during CDCLK change notification

there is still one report of the CDCLK-change request timing out on a
KBL machine, see the Reference link. On that machine the maximum time
the request took to succeed was 34ms, so increase the timeout to 50ms.

v2:
- Change timeout from 100 to 50 ms to maintain the current 50 ms limit
  for atomic waits in the driver. (Chris, Tvrtko)

Reference: https://bugs.freedesktop.org/show_bug.cgi?id=99345
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1487946730-17162-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 0129936ddda26afd5d9d207c4e86b2425952579f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.22

x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk

[ Upstream commit bba8376aea1dcbbe22bbda118c52abee317c7609 ]

The reboot quirk for ASUS EeeBook X205TA contains a typo in
DMI_PRODUCT_NAME, improperly referring to X205TAW instead of
X205TA, which prevents the quirk from being triggered. The
model X205TAW already has a reboot quirk of its own.

This fix simply removes the inappropriate final letter W.

Fixes: 90b28ded88dd ("x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk")
Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Link: http://lkml.kernel.org/r/1489064417-7445-1-git-send-email-matjaz.hegedic@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add ignore-residue quirk for Initio INIC-3619

[ Upstream commit d595259fbb7a7afed241b1afb2c4fe4b47de47fa ]

This USB-SATA bridge chip is used in a StarTech enclosure for
optical drives.

Without the quirk MakeMKV fails during the key exchange with an
installed BluRay drive:
> Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED'
> occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:2'

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk

[ Upstream commit 3b3e78552d3077ec70d2640e629e07e3ab416a6a ]

Without the parameter reboot=a, ASUS EeeBook X205TA/W will hang
when it should reboot. This adds the appropriate quirk, thus
fixing the problem.

Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Link: http://lkml.kernel.org/r/1488737804-20681-1-git-send-email-matjaz.hegedic@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk

[ Upstream commit 90b28ded88dda8bea82b4a86923e73ba0746d884 ]

Without the parameter reboot=a, ASUS EeeBook X205TA will hang when it should reboot.

This adds the appropriate quirk, thus fixing the problem.

Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: asus-wmi: Detect quirk_no_rfkill from the DSDT

[ Upstream commit 71050ae7bf83e4d71a859257d11adc5de517073e ]

Some Asus laptops that have an airplane-mode indicator LED, also have
the WMI WLAN user bit set, and the following bits in their DSDT:

    Scope (_SB)
    {
      (...)
      Device (ATKD)
      {
        (...)
        Method (WMNB, 3, Serialized)
        {
          (...)
          If (LEqual (IIA0, 0x00010002))
          {
            OWGD (IIA1)
            Return (One)
          }
        }
      }
    }

So when asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store the
wlan state, it drives the airplane-mode indicator LED (through the call
to OWGD) in an inverted fashion: the LED is ON when airplane mode is OFF
(since wlan is ON), and vice-versa.

This commit skips registering RFKill switches at all for these laptops,
to allow the asus-wireless driver to drive the airplane mode LED
correctly through the ASHS ACPI device. Relying on the presence of ASHS
and ASUS_WMI_DSTS_USER_BIT avoids adding DMI-based quirks for at least
21 different laptops.

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB

[ Upstream commit 8023eff10e7b0327898f17f0b553d2e45c71cef3 ]

The bluetooth adapter Atheros AR3012 can't be enumerated
and make the bluetooth function broken.

T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3362 Rev=00.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

The error is:

 usb 2-6: device not accepting address 7, error -62
 usb usb2-port6: unable to enumerate USB device

It is caused by adapter's connected port is mapped to xHC
controller, but the xHCI is not supported by the usb device.

The output of 'sudo lspci -nnxxx -s 00:14.0':

 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04)
 00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00
 10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00
 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20
 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00
 40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00
 50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00
 60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00
 80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00
 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00
 d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00
 e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00
 f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00

By referencing Intel Platform Controller Hub(PCH) datasheet,
the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h
decides the setting of mapping the port to EHCI controller or
xHC controller. And the port mapped to xHC will enable xHCI
during bus resume.

The setting of disabling bluetooth adapter's connected port is
0x000001D9. The value can be obtained by few times 1 bit flip
operation. The suited configuration should have the 'lsusb -t'
result with bluetooth using ehci:

/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M
    |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
        |__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
        |__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M

Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[andy: resolve merge conflict in asus-wmi.h]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: s3c2410: Fix infinite interrupt in soft mode

[ Upstream commit 0b445549ea6f91ffea78a976fe89b932db6e077a ]

In soft (no-reboot) mode, the driver self-pings watchdog upon expiration
of an interrupt.  However the interrupt itself was not cleared thus on
first hit, the system enters infinite interrupt handling loop.

On Odroid U3 (Exynos4412), when booted with s3c2410_wdt.soft_noboot=1
argument the console is flooded:
# killall -9 watchdog
[   60.523760] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq)
[   60.536744] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq)

Fix this by writing something to the WTCLRINT register to clear the
interrupt.  The register WTCLRINT however appeared in S3C6410 so a new
watchdog quirk and flavor are needed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add ACS quirk for Qualcomm QDF2400 and QDF2432

[ Upstream commit 33be632b8443b6ac74aa293504f430604fb9abeb ]

The Qualcomm QDF2xxx root ports don't advertise an ACS capability, but they
do provide ACS-like features to disable peer transactions and validate bus
numbers in requests.

To be specific:
* Hardware supports source validation but it will report the issue as
Completer Abort instead of ACS Violation.

* Hardware doesn't support peer-to-peer and each root port is a root
complex with unique segment numbers.

* It is not possible for one root port to pass traffic to the other root
port.  All PCIe transactions are terminated inside the root port.

Add an ACS quirk for the QDF2400 and QDF2432 products.

[bhelgaas: changelog]
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Sort the list of devices with D3 delay quirk by ID

[ Upstream commit cd3e2eb8905d14fe28a2fc75362b8ecec16f0fb6 ]

Sort the list of Intel devices that have no PCI D3 delay by ID.  Add a
comment for group of devices that had not been marked yet.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-esdhc: remove default broken-cd for ARM

[ Upstream commit e9acc77dd046b22c7ebf70e35f68968978445f8b ]

Initially all QorIQ platforms were PowerPC architecture and they didn't
support card detection except several platforms. The driver added the
quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION as default and this made broken-cd
property in dts node didn't work. Now QorIQ platform turns to ARM
architecture and most of them could support card detection. However it's
a large number of dts trees that need to be fixed with broken-cd if we
remove the default SDHCI_QUIRK_BROKEN_CARD_DETECTION in driver. And the
users don't want to see this. So this patch is to remove this default
quirk just for ARM and keep it for PowerPC.(Note, QorIQ PowerPC platform
only has big-endian eSDHC while QorIQ ARM platform has big-endian or
little-endian eSDHC) This makes broken-cd property work again for ARM.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports

[ Upstream commit 72f2ff0deb870145a5a2d24cd75b4f9936159a62 ]

The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it
cannot generate MSIs.  It can transfer MSI/MSI-X from downstream devices,
but does not support MSI/MSI-X itself.

Add a quirk to prevent use of MSI/MSI-X by the Root Port.

[bhelgaas: changelog, sort vendor ID #define, drop device ID #define]
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add Broadcom Northstar2 PAXC quirk for device class and MPSS

[ Upstream commit ce709f86501a013e941e9986cb072eae375ddf3e ]

The Broadcom Northstar2 SoC has a number of quirks for the PAXC
(internal/fake) PCI bus.  Specifically, the PCI config space is shared
between the root port and the first PF (ie., PF0), and a number of fields
are tied to zero (thus preventing them from being set).  These cannot be
"fixed" in device firmware, so we must fix them with a quirk.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: smccc: Update HVC comment to describe new quirk parameter

[ Upstream commit 3046ec674d441562c6bb3e4284cd866743042ef3 ]

Commit 680a0873e193 ("arm: kernel: Add SMC structure parameter") added
a new "quirk" parameter to the SMC and HVC SMCCC backends, but only
updated the comment for the SMC version. This patch adds the new
paramater to the comment describing the HVC version too.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/adreno: move function declarations to header file

[ Upstream commit a5725ab0497ad91a2df7c01a78bf1a0cc5be4526 ]

We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:535:17: warning: no previous prototype for 'a3xx_gpu_init' [-Wmissing-prototypes]
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:624:17: warning: no previous prototype for 'a4xx_gpu_init' [-Wmissing-prototypes]

In fact, both functions are declared in
drivers/gpu/drm/msm/adreno/adreno_device.c, but should be declared
in a header file. So this patch moves both function declarations to
drivers/gpu/drm/msm/adreno/adreno_gpu.h.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477127865-9381-1-git-send-email-baoyou.xie@linaro.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: qcom: scm: Fix interrupted SCM calls

[ Upstream commit 82bcd087029f6056506ea929f11af02622230901 ]

This patch adds a Qualcomm specific quirk to the arm_smccc_smc call.

On Qualcomm ARM64 platforms, the SMC call can return before it has
completed.  If this occurs, the call can be restarted, but it requires
using the returned session ID value from the interrupted SMC call.

The quirk stores off the session ID from the interrupted call in the
quirk structure so that it can be used by the caller.

This patch folds in a fix given by Sricharan R:
https://lkml.org/lkml/2016/9/28/272

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: kernel: Add SMC structure parameter

[ Upstream commit 680a0873e193bae666439f4b5e32c758e68f114c ]

This patch adds a quirk parameter to the arm_smccc_(smc/hvc) calls.
The quirk structure allows for specialized SMC operations due to SoC
specific requirements.  The current arm_smccc_(smc/hvc) is renamed and
macros are used instead to specify the standard arm_smccc_(smc/hvc) or
the arm_smccc_(smc/hvc)_quirk function.

This patch and partial implementation was suggested by Will Deacon.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: don't apply generic settings to old devices

[ Upstream commit e7deb1570a527d3c74be4e21a72b1b459605c501 ]

Non-generic devices have numbered_buttons set for both pen and
touch interfaces by default. The actual number of buttons on the
interface is normally manually decided later, which is different
from what those HID generic devices are processed, where number
of buttons are directly retrieved from HID descriptors.

This patch adds the missed HID_GENERIC check and moves the statement
to wacom_setup_pad_input_capabilities since it's not a quirk anymore.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sun4i-i2s: Add quirks to handle a31 compatible

[ Upstream commit 2ad6f30de7087515a0bc2a718fca6681a57739a0 ]

Some SoCs have a reset line that must be asserted/deasserted.
This patch adds a quirk to handle the new compatible
"allwinner,sun6i-a31-i2s" which will deassert the reset
line on probe function and assert it on remove's one.

This new compatible is useful in case of A33 codec driver, for example.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: save NVS memory for Lenovo G50-45

[ Upstream commit cbc00c1310d34139a63946482b40a6b261a03fb9 ]

In commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to
accelerate S3), to optimize S3 suspend/resume speed, code is introduced
to ignore NVS memory saving during S3 for all the platforms later than
2012.

But, Lenovo G50-45, a platform released in 2015, still needs NVS memory
saving during S3. A quirk is introduced for this platform.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431
Tested-by: Przemek <soprwa@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Drop unnecessary code ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: cht_bsw_rt5645: add Baytrail MCLK support

[ Upstream commit a50477e55fff69e1028f25624ee9fc9182d59b1f ]

The existing code assumes a 19.2 MHz MCLK as the default
hardware configuration. This is valid for CherryTrail but
not for Baytrail.

Add explicit MCLK configuration to set the 19.2 clock on/off
depending on DAPM events.

This is a prerequisite step to enable devices with Baytrail
and RT5645 such as Asus X205TA

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: cht_bsw_rt5645: harden ACPI device detection

[ Upstream commit 42648c2270ca0c96935dfc5d0f5c4f8d2406cf75 ]

Fix classic issue of having multiple codecs listed in DSDT
but a single one actually enabled. The previous code did
not handle such errors and could also lead to uninitalized
configurations

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Baytrail: add quirk for Lenovo Thinkpad 10

[ Upstream commit fd0138dc5d17c636477b371d99265c406437c583 ]

the BIOS reports this codec as RT5640 but it's a rt5670. Use the
quirk mechanism to use the cht_bsw_rt5672 machine driver

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codecs: rt5670: add quirk for Lenovo Thinkpad 10

[ Upstream commit 93ffeaa8ee3f10a0628ad135b552a2497e0bef2c ]

the BIOS incorrectly reports this codec as 5640 but it is
really a rt5670

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rt5670: Add missing 10EC5072 ACPI ID

[ Upstream commit d25280060835e1b2b84c242905da8334ab15c5b4 ]

rt5670 driver supports also RT5672 codec, but its ACPI ID is missing.
This was found on Dell Wyse 3040 box.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / button: Change default behavior to lid_init_state=open

[ Upstream commit 77e9a4aa9de10cc1418bf9a892366988802a8025 ]

More and more platforms need the button.lid_init_state=open quirk. This
patch sets it the default behavior.

If a platform doesn't send lid open event or lid open event is lost due to
the underlying system problems, then we can compare various combinations:
1. systemd/acpid is used to suspend system or not, systemd has a special
   logic forcing open event after resuming;
2. _LID returns a cached value or not.

The result is as follows:

 1. lid_init_state=method
   1. cached
      1. resumed by lid:
         (x) event=close
         (x) systemd=suspends again
         (x) acpid=suspends again
         (x) state=close
      2. resumed by other:
         (o) event=close
         (x) systemd=suspends again
         (x) acpid=suspends again
         (o) state=close
   2. non-cached
      1. resumed by lid:
         (o) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (o) state=open
      2. resumed by other:
         (o) event=close
         (x) systemd=suspends again
         (x) acpid=suspends again
         (o) state=close
 2. lid_init_state=open
   1. cached
      1. resumed by lid:
         (o) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (x) state=close
      2. resumed by other:
         (x) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (o) state=close
   2. non-cached
      1. resumed by lid:
         (o) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (o) state=open
      2. resumed by other:
         (x) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (o) state=close
 3. lid_init_state=ignore
   1. cached
      1. resumed by lid:
         (o) event=none
         (x) systemd=suspends again
         (o) acpid=resumes
         (x) state=close
      2. resumed by other:
         (o) event=none
         (x) systemd=suspends again
         (o) acpid=resumes
         (o) state=close
   2. non-cached
      1. resumed by lid:
         (o) event=none
         (x) systemd=suspends again
         (o) acpid=resumes
         (o) state=open
      2. resumed by other:
         (o) event=none
         (x) systemd=suspends again
         (o) acpid=resumes
         (o) state=close

As a conclusion:
 1. With systemd changed, lid_init_state=ignore has only one problem and the
    problem comes from an underlying issue, not userspace and kernel lid
    handling.
 2. Without systemd changed, lid_init_state=open can be the default
    behavior as the pass ratio is not much worse than lid_init_state=ignore.
 3. lid_init_state=method is buggy, we can have a separate patch to make it
    deprectated.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=187271
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sata: ahci-da850: implement a workaround for the softreset quirk

[ Upstream commit f4d435f3265661d04e5290a0a0450e3a38898128 ]

There's an issue with the da850 SATA controller: if port multiplier
support is compiled in, but we're connecting the drive directly to
the SATA port on the board, the drive can't be detected.

To make SATA work on the da850-lcdk board: first try to softreset
with pmp - if the operation fails with -EBUSY, retry without pmp.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add ACS quirk for Intel Union Point

[ Upstream commit 7184f5b451cf3dc61de79091d235b5d2bba2782d ]

Intel 200-series chipsets have the same errata as 100-series: the ACS
capability doesn't follow the PCIe spec, the capability and control
registers are dwords rather than words.  Add PCIe root port device IDs to
existing quirk.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk

[ Upstream commit 8413299cb3933dade6186bbee8363f190032107e ]

Since v4.10-rc1, the following logs appears in loop :
[  801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[  801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[  801.966611] usb usb6-port1: cannot disable (err = -32)
[  806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[  806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[  806.096494] usb usb6-port1: cannot disable (err = -32)

After analysis, xhci try to set link in U3 and returns an error.
Using snps,dis_u3_susphy_quirk fix this issue.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mga: remove device_is_agp callback

[ Upstream commit 858b2c1bf820ebfba89c5e2867ab882bdb5b2f5a ]

It's only for a device quirk, and we might as well do that in the load
callback.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-10-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: host: pass quirk-broken-port-ped property for known broken revisions

[ Upstream commit e42a5dbb8a3d14f5a35bffa3bf7dcb87883f767a ]

dwc3 revisions <=3.00a have a limitation where Port Disable command
doesn't work. Set the quirk-broken-port-ped property for such
controllers so XHCI core can do the necessary workaround.

[rogerq@ti.com] Updated code from platform data to device property.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: enable BROKEN_PED quirk if platform requested

[ Upstream commit 21939f003ad09355d9c975735750bb22aa37d8de ]

In case 'quirk-broken-port-ped' property is passed in via device property,
we should enable the corresponding BROKEN_PED quirk flag for XHCI core.

[rogerq@ti.com] Updated code from platform data to device property
and added DT binding.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: add quirk flag for broken PED bits

[ Upstream commit 41135de1e7fd14c6fcb9158404ba5c8fb97bf259 ]

Some devices from Texas Instruments [1] suffer from
a silicon bug where Port Enabled/Disabled bit
should not be used to silence an erroneous device.

The bug is so that if port is disabled with PED
bit, an IRQ for device removal (or attachment)
will never fire.

Just for the sake of completeness, the actual
problem lies with SNPS USB IP and this affects
all known versions up to 3.00a. A separate
patch will be added to dwc3 to enabled this
quirk flag if version is <= 3.00a.

[1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf
Section i896— USB xHCI Port Disable Feature Does Not Work

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: davinci: PM: support da8xx DT platforms

[ Upstream commit 7e431af8fa0b9ed9d74378c99514856211cb9db8 ]

Add PM support for DA850 device-tree boot.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: gpio_keys - add support for GPIO descriptors

[ Upstream commit 5feeca3c1e39c01f9ef5abc94dea94021ccf94fc ]

GPIO descriptors are the preferred way over legacy GPIO numbers
nowadays. Convert the driver to use GPIO descriptors internally but
still allow passing legacy GPIO numbers from platform data to support
existing platforms.

Based on commits 633a21d80b4a2cd6 ("input: gpio_keys_polled: Add support
for GPIO descriptors") and 1ae5ddb6f8837558 ("Input: gpio_keys_polled -
request GPIO pin as input.").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_omap: Add OMAP_DMA_TX_KICK quirk for AM437x

[ Upstream commit b6ffcf21082300519bc4f9c3d24f61207cc9eae4 ]

UART uses as EDMA as dma engine on AM437x SoC and therefore, requires
OMAP_DMA_TX_KICK quirk just like AM33xx. So, enable OMAP_DMA_TX_KICK
quirk for AM437x platform as well. While at that, drop use of
of_machine_is_compatible() and instead pass quirks via device data.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: msm: Rely on core to override AHBBURST

[ Upstream commit dd3749099cfa2c80039193c438b90f3160eaf7f9 ]

The core framework already handles setting this parameter with a
platform quirk. Add the appropriate flag so that we always set
AHBBURST to 0. Technically DT should be doing this, but we always
do it for msm chipidea devices so setting the flag in the driver
works just as well. If the burst needs to be anything besides 0,
we expect the 'ahb-burst-config' dts property to be present.

Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: issue link starup 2 times if device isn't active

[ Upstream commit 7caf489b99a42a9017ef3d733912aea8794677e7 ]

If we issue the link startup to the device while its UniPro state is
LinkDown (and device state is sleep/power-down) then link startup
will not move the device state to Active. Device will only move to
active state if the link starup is issued when its UniPro state is
LinkUp. So in this case, we would have to issue the link startup 2
times to make sure that device moves to active state.

Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: introduce a new ufshcd_statea UFSHCD_STATE_EH_SCHEDULED

[ Upstream commit 141f81651037ea109188a6bafdc5c9a318bd5a46 ]

Add a new ufshcd_state, indicats that an err handler may get to run
immediately. Use UFSHCD_STATE_ERROR here looks not literaly correct.

Signed-off-by: Zang Leigang <zangleigang@hisilicon.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: bytcr_rt5640: quirks for Insyde devices

[ Upstream commit 571800487837263e914ef68681e4ad6a57d49c7f ]

There are literally dozens of Insyde devices with a different
name but with the same audio routing. Use a generic quirk to
match on vendor name only to avoid recurring edits of the
same thing.

Signed-off-by: youling257 <youling257@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: actually drive the BDW reserved IDs

[ Upstream commit 98b2f01c8dfc8922a2af1fe82a1c40cac4911634 ]

Back in 2014, commit fb7023e0e248 ("drm/i915: BDW: Adding Reserved PCI
IDs.") added the reserved PCI IDs in order to try to make sure we had
working drivers in case we ever released products using these IDs
(since we had instances of this type of problem in the past). The
problem is that the patch only touched the macros used by
early-quirks.c and by the user space components that rely on
i915_pciids.h, it didn't touch the macros used by i915_pci.c. So we
correctly handled the stolen memory for these theoretical IDs, but we
didn't actually drive the devices from i915.ko.

So this patch fixes the original commit by actually making i915.ko
drive these IDs, which was the goal. There's no information on what
would be the GT count on these IDs, so we just go with the safer
intel_broadwell_info, at the risk of ignoring a possibly inexistent
BSD2_RING.

I did some checking, and it seems that these IDs are driven by
intel-gpu-tools, xf86-video-intel and libdrm (since they contain old
copies of i915_pciids.h), but they are not checked by mesa.

The alternative to this patch would be to just assume we're actually
never going to use these IDs, and then remove them from our ID lists
and make sure our user space components sync the latest i915_pciids.h
copy. I'm fine with either approaches, as long as we make sure that
every component tries to drive the same list of PCI IDs.

Fixes: fb7023e0e248 ("drm/i915: BDW: Adding Reserved PCI IDs.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-3-git-send-email-paulo.r.zanoni@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: more .is_mobile cleanups for BDW

[ Upstream commit 0784bc624ae9be4269f8129572ee164ca680ca7c ]

Commit 8d9c20e1d1e3 ("drm/i915: Remove .is_mobile field from platform
struct") removed mobile vs desktop differences for HSW+, but forgot
the Broadwell reserved IDs, so do it now.

It's interesting to notice that these IDs are used by early-quirks.c
but are *not* used by i915_pci.c.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-2-git-send-email-paulo.r.zanoni@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: fix INTEL_BDW_IDS definition

[ Upstream commit 7fbd995ce4241e98d30859405504c3fb279c4ccb ]

Remove duplicated IDs from the list. Currently, this definition is
only used by early-quirks.c. From my understanding of the code, having
duplicated IDs shouldn't be causing any bugs.

Fixes: 8d9c20e1d1e3 ("drm/i915: Remove .is_mobile field from platform struct")
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-1-git-send-email-paulo.r.zanoni@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/edid: constify edid quirk list

[ Upstream commit 23c4cfbdab494568600ae6073a2bf02be4b10f4e ]

No reason not to be const.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482923186-22430-1-git-send-email-jani.nikula@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>