OSDN Git Service
Harry Yang [Thu, 23 Mar 2017 05:45:25 +0000 (22:45 -0700)]
qcom: smblib: supsend USB input during boost
In parallel configuration, suspend one charger usb input before the
other enters boost mode. Even more so in USBIN-USBIN mode.
Change-Id: I63728421b7697e70bbd83c4c82203b7ebafdaa9f
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Harry Yang [Wed, 15 Mar 2017 21:40:46 +0000 (14:40 -0700)]
ARM: dts: msm: Specify smb138x vbus regulator for USBIN-USBIN
Expose vbus regulator from smb138x in USBIN-USBIN parallel mode.
Change-Id: I3581cbc7ffade0d25363038c25e40e35bd4fce28
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Abhijeet Dharmapurikar [Thu, 23 Mar 2017 18:25:11 +0000 (11:25 -0700)]
pmic-voter: bump up from 8 clients to 16
The current code only supports 8 clients max. There are
situations where we will need more than that.
Bump it up to 16.
Change-Id: I7a32f67b3a4579ec79eb4f0e2a971a1a3a29a7c1
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Linux Build Service Account [Wed, 29 Mar 2017 13:49:33 +0000 (06:49 -0700)]
Merge "ath10k: Use atomic read for fw_crashed state"
Linux Build Service Account [Wed, 29 Mar 2017 13:49:32 +0000 (06:49 -0700)]
Merge "ASoC: msm: add support for ADSP Stream Cmd and Callback"
Linux Build Service Account [Wed, 29 Mar 2017 13:49:32 +0000 (06:49 -0700)]
Merge "soc: qcom: pil: Explicitly clear the subsystem loading address"
Linux Build Service Account [Wed, 29 Mar 2017 13:49:31 +0000 (06:49 -0700)]
Merge "soc: qcom: Separate out qmi handle destruction and PD notification"
Govind Singh [Tue, 28 Mar 2017 04:20:48 +0000 (09:50 +0530)]
ath10k: Use atomic read for fw_crashed state
fw_crashed is atomic state variable, use atomic
read operation for reading the value
Change-Id: Ieaad558cad684a0eb7daaad9d220b44c032d69ca
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Linux Build Service Account [Tue, 28 Mar 2017 03:43:43 +0000 (20:43 -0700)]
Merge "qpnp-fg-gen3: prime CC_SOC_SW when capacity learning begins"
Linux Build Service Account [Tue, 28 Mar 2017 03:43:42 +0000 (20:43 -0700)]
Merge "esoc: add support for additonal physical link info"
Linux Build Service Account [Tue, 28 Mar 2017 03:43:41 +0000 (20:43 -0700)]
Merge "defconfig: msm: enable EDAC_CORTEX_ARM64_DBE_IRQ_ONLY for SDM660"
Linux Build Service Account [Tue, 28 Mar 2017 03:43:38 +0000 (20:43 -0700)]
Merge "BACKPORT: f2fs: add a max block check for get_data_block_bmap"
Linux Build Service Account [Tue, 28 Mar 2017 03:43:38 +0000 (20:43 -0700)]
Merge "qcom: smblib: Only enable hdc and icl irqs on QC/PD chargers"
Gaurav Kohli [Sat, 25 Mar 2017 12:06:30 +0000 (17:36 +0530)]
soc: qcom: pil: Explicitly clear the subsystem loading address
Explicitly clear the subsystem loading address in case of any
memory failure. It will help to avoid any platform dependency.
Change-Id: I3be8f6318d68f02c02e637fc34f4a868e9fafa45
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
Linux Build Service Account [Mon, 27 Mar 2017 07:00:25 +0000 (00:00 -0700)]
Merge "ARM: dts: msm: Update LPM parameter values for sdm630"
Linux Build Service Account [Mon, 27 Mar 2017 07:00:24 +0000 (00:00 -0700)]
Merge "usb: gadget: f_ncm: allocate/free net device upon driver bind/unbind"
Linux Build Service Account [Mon, 27 Mar 2017 07:00:23 +0000 (00:00 -0700)]
Merge "ath10k: msm: enable ATH10k DEBUG config for APQ8098"
Linux Build Service Account [Mon, 27 Mar 2017 07:00:22 +0000 (00:00 -0700)]
Merge "ath10k: Fix ATH10K_DBG_SNOC debug mask"
Linux Build Service Account [Mon, 27 Mar 2017 07:00:21 +0000 (00:00 -0700)]
Merge "msm: isp: initialize pd stats buffer index"
Linux Build Service Account [Mon, 27 Mar 2017 07:00:20 +0000 (00:00 -0700)]
Merge "msm: isp: Fix unbalanced hvx clk disable"
Linux Build Service Account [Mon, 27 Mar 2017 07:00:19 +0000 (00:00 -0700)]
Merge "msm: camera: isp: Set max address for stats write master"
Avaneesh Kumar Dwivedi [Sat, 25 Mar 2017 12:31:09 +0000 (18:01 +0530)]
soc: qcom: Separate out qmi handle destruction and PD notification
This patch move qmi handle destruction in a new function which is
executed in a worker thread and PD notification is issued in
blocking call. This avoid issue of late PD notification due to
delay in qmi handle destruction.
Change-Id: I0c7efa336f7849ffde95143e3a0134ebb9e33022
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Linux Build Service Account [Sat, 25 Mar 2017 20:54:58 +0000 (13:54 -0700)]
Merge "Merge tag v4.4.55 into branch 'msm-4.4'"
Linux Build Service Account [Sat, 25 Mar 2017 20:54:56 +0000 (13:54 -0700)]
Merge "qcom: smb138x-charger: add vbus regulator"
Linux Build Service Account [Sat, 25 Mar 2017 20:54:56 +0000 (13:54 -0700)]
Merge "qcom: smb138x-charger: Add support for setting parallel mode"
Linux Build Service Account [Sat, 25 Mar 2017 13:51:47 +0000 (06:51 -0700)]
Merge "ARM: dts: msm: add gpio irq for laser sensor on msm8998"
Neeraj Upadhyay [Sat, 25 Mar 2017 13:40:09 +0000 (19:10 +0530)]
defconfig: msm: enable EDAC_CORTEX_ARM64_DBE_IRQ_ONLY for SDM660
Disable handling of single bit errors for SDM660, as they are
correctable.
Change-Id: I14618e5f2685c08c57a6375e7a80d1090bbf0eaa
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Mark Salyzyn [Mon, 25 Apr 2016 22:52:05 +0000 (15:52 -0700)]
BACKPORT: f2fs: add a max block check for get_data_block_bmap
(cherry pick from commit
179448bfe4cd201e98e728391c6b01b25c849fe8)
This patch adds a max block check for get_data_block_bmap.
Trinity test program will send a block number as parameter into
ioctl_fibmap, which will be used in get_node_path(), when the block
number large than f2fs max blocks, it will trigger kernel bug.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Xue Liu <liuxueliu.liu@huawei.com>
[Jaegeuk Kim: fix missing condition, pointed by Chao Yu]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Bug:
28271368
Git-repo: https://android.googlesource.com/kernel/tegra.git
Git-commit:
3c714201e02ec08652be4b9544a5267e79bde3a9
Change-Id: Ia5acae04522993d5b60a0bcb5ccc184c66532be8
[d-cagle@codeaurora.org Resolve trivial merge conflicts]
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
Harry Yang [Tue, 14 Mar 2017 19:58:32 +0000 (12:58 -0700)]
qcom: smb138x-charger: add vbus regulator
Add vbus regulator in USBIN-USBIN parallel mode.
Change-Id: I57d5cc54aa789a942d5b1a5bc33677ba263d3284
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Harry Yang [Tue, 14 Mar 2017 19:23:01 +0000 (12:23 -0700)]
qcom: smb138x-charger: Add support for setting parallel mode
More than one parallel configurations between PMI8998 and SMB138x are
supported. Update the parallel mode from DT.
Change-Id: I07c30e8d4d860acaf24dd5d0608dca6ba3e65559
Signed-off-by: Harry Yang <harryy@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Satya Durga Srinivasu Prabhala [Tue, 14 Mar 2017 23:51:50 +0000 (16:51 -0700)]
esoc: add support for additonal physical link info
Some of the device configurations support multiple external SOCs.
To differentiate physical links, add support for additonal info
about the physical link.
CRs-Fixed:
2024578
Change-Id: If71bf23d798f8bf0b6594a686415fe9b806e4226
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Linux Build Service Account [Fri, 24 Mar 2017 19:13:09 +0000 (12:13 -0700)]
Merge "ath10k: Add rx rate histogram for data packet"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:08 +0000 (12:13 -0700)]
Merge "input: synaptics_dsx: remove array declaration in write function"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:07 +0000 (12:13 -0700)]
Merge "i2c-msm-v2: Create rx completion object for dma mode"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:06 +0000 (12:13 -0700)]
Merge "iio: qcom-rradc: Update reading battery ID channel"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:05 +0000 (12:13 -0700)]
Merge "msm: ipa: add retry to channel stop"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:04 +0000 (12:13 -0700)]
Merge "ath10k: Enable Subsystem Restart for ath10k WCN3990 driver"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:03 +0000 (12:13 -0700)]
Merge "msm: msm_bus: initialize the local variable"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:02 +0000 (12:13 -0700)]
Merge "ARM: dts: msm: config SD card GPIO on SDM630 QRD"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:01 +0000 (12:13 -0700)]
Merge "msm: msm_bus: fix the memory leak issue"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:00 +0000 (12:13 -0700)]
Merge "mmc: sdhci-msm: Cache mmc data structures for debugging"
Linux Build Service Account [Fri, 24 Mar 2017 19:13:00 +0000 (12:13 -0700)]
Merge "msm: mdss: Remove DSC parameters from MDP caps"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:58 +0000 (12:12 -0700)]
Merge "msm: mdss: Perform splash cleanup on slave control"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:57 +0000 (12:12 -0700)]
Merge "msm: mdss: handle force clock lane to HS option properly"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:57 +0000 (12:12 -0700)]
Merge "msm: mdss: ensure proper state transition during ULPS exit"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:56 +0000 (12:12 -0700)]
Merge "msm: mdss: initialize external BL level when fb probe"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:55 +0000 (12:12 -0700)]
Merge "ion: ion_system_heap: Fix null pointer dereference"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:53 +0000 (12:12 -0700)]
Merge "msm: wlan: Change EIRP value for country China"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:52 +0000 (12:12 -0700)]
Merge "USB: qdss: Fix NULL pointer deference issue during QDSS transfers"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:51 +0000 (12:12 -0700)]
Merge "Revert "ARM: dts: msm: Enable midframe sampling timer on SDM660""
Linux Build Service Account [Fri, 24 Mar 2017 19:12:50 +0000 (12:12 -0700)]
Merge "ARM: dts: msm: add speed bin 1 CPU clock boost frequency for msm8996pro"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:50 +0000 (12:12 -0700)]
Merge "arm64: kaslr: Fix up the kernel image alignment"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:49 +0000 (12:12 -0700)]
Merge "msm: camera: isp: Rate limit certain logs"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:48 +0000 (12:12 -0700)]
Merge "ARM: dts: msm: designate LDO10A as a parent of LDO7B on sdm660"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:47 +0000 (12:12 -0700)]
Merge "msm_serial_hs: modify uart driver to prevent race between timer calls"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:46 +0000 (12:12 -0700)]
Merge "ARM: dts: msm: designate LDO10A as a parent of LDO7B on sdm630"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:45 +0000 (12:12 -0700)]
Merge "USB: f_audio_source: Use different names for multi instances"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:44 +0000 (12:12 -0700)]
Merge "soc: qcom: service-locator: Free memory in case of error"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:43 +0000 (12:12 -0700)]
Merge "ARM: dts: msm: Set the rate for camss vfe clock on SDM660 & SDM630"
Linux Build Service Account [Fri, 24 Mar 2017 19:12:32 +0000 (12:12 -0700)]
Merge "ARM: dts: msm: designate LDO12 as a parent of LDO24 on msm8998"
Govind Singh [Fri, 24 Mar 2017 14:18:57 +0000 (19:48 +0530)]
ath10k: msm: enable ATH10k DEBUG config for APQ8098
CONFIG_ATH10K_DEBUG needs to enabled to get the
debug logs for various debug log levels.
Enable CONFIG_ATH10K_DEBUG to have debug log support
for ath10k driver.
Change-Id: Ibd8641fe79ca4cfb68e843247610dbd28d857cc7
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Sarada Prasanna Garnayak <sgarna@codeaurora.org>
Shantanu Jain [Fri, 29 Apr 2016 11:41:04 +0000 (17:11 +0530)]
input: synaptics_dsx: remove array declaration in write function
Remove array declaration in i2c write function of Synaptics DSX
touch driver and use the malloc function to allocate the memory.
This change is added to use heap memory instead of stack memory.
CRs-Fixed:
1010986
Change-Id: I8f2f75744bb442191d7d4577795d986e10ea1cf6
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Govind Singh [Fri, 24 Mar 2017 07:17:27 +0000 (12:47 +0530)]
ath10k: Fix ATH10K_DBG_SNOC debug mask
ATH10K_DBG_SNOC debug mask is incorrectly assigned.
Fix this by correctly assigning the debug mask
for WCN3990.
Change-Id: I261e4789e4c69cf2493b8e18df9ffb538b256b20
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Ashutosh Kumar [Sat, 25 Feb 2017 05:14:32 +0000 (10:44 +0530)]
ath10k: Add rx rate histogram for data packet
Add the rate histogram for rate_index, band, ht,
vht and vht_nss for received data packet.
CRs-Fixed:
2019645
Change-Id: I52ae3b94c886b8a200162cd7d2a220548296bf91
Signed-off-by: Ashutosh Kumar <askuma@codeaurora.org>
Xiaojun Sang [Tue, 7 Feb 2017 13:30:14 +0000 (21:30 +0800)]
ASoC: msm: add support for ADSP Stream Cmd and Callback
Add support for ADSP Stream Cmd and Callback for PCM
and compress driver. Mixer controls are added as interface
for ADSP stream cmd and callback event.
CRs-Fixed:
2023802
Change-Id: Ib2de5aebe257332171c3b1ebe3d26b3422d61c97
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Sayali Lokhande [Wed, 14 Dec 2016 05:40:55 +0000 (11:10 +0530)]
mmc: sdhci-msm: Cache mmc data structures for debugging
Add debug RAM to store few important mmc data structures
on first point of failure(like mmc_card, mmc_host, sdhci_host)
for debugging purpose, otherwise it will be overwritten as
BUG_ON is removed now.
Change-Id: Ia1388a77aeed60d4d49a63b8798d3a925a60ac2c
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Odelu Kukatla [Thu, 23 Mar 2017 16:36:07 +0000 (22:06 +0530)]
msm: msm_bus: fix the memory leak issue
Client name allocated dynamically during the registration
is not freed at the time of unregistration. This is
leading to memory leak issue. This patch fixes the issue
by freeing up the client name during unregistartion time.
Change-Id: I0fe75ce71fdf0ee9a1268d52ac244047cc3413d7
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Govind Singh [Mon, 27 Feb 2017 07:49:17 +0000 (13:19 +0530)]
ath10k: Enable Subsystem Restart for ath10k WCN3990 driver
Add service registry and PD indication support
Add support for USER PD service discovery and
associated notifications.
Enable recovery when USER PD DOWN indication is
received.
Change-Id: I548cd231f3d2090c5aa0ed328fbfb909d17467e8
Signed-off-by: Govind Singh <govinds@codeaurora.org>
xiaonian [Fri, 24 Mar 2017 02:50:10 +0000 (10:50 +0800)]
ARM: dts: msm: config SD card GPIO on SDM630 QRD
As GPIO 54 has already been connected to an external
pull up resistor, config it to no pull to save power
consumption.
CRs-Fixed:
2024143
Change-Id: Ic52896f9bf0e001f505d1bb7400df2ae96f44d49
Signed-off-by: xiaonian <xiaonian@codeaurora.org>
Hemant Kumar [Thu, 9 Mar 2017 03:05:14 +0000 (19:05 -0800)]
usb: gadget: f_ncm: allocate/free net device upon driver bind/unbind
Driver registers net device in bind but does not unregister it upon
driver unbind. Upon composition switch ncm net device is no longer
in use, hence unregister and free it in driver unbind. Unregistering
net device sends notification to user space which can be used by user
space entities to perform necessary actions for example updating UI.
Symmetrically allocate and register net device in driver bind.
Change-Id: Ie1bb781aba8efee20cc98c1d6bf264403c3b087e
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Siddartha Mohanadoss [Wed, 22 Mar 2017 23:45:18 +0000 (16:45 -0700)]
iio: qcom-rradc: Update reading battery ID channel
The battery ID channel on the RRADC can be disabled
during initialization. Therefore update the sequence
to enable the channel before enabling the trigger and
continuous mode. After reading the battery ID result
from the RRADC controller, disable the trigger
and disable the channel after conversion request.
CRs-Fixed:
2023991
Change-Id: I461e04175ae351312b68771ef85cd928d5c0e4b1
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Subbaraman Narayanamurthy [Wed, 15 Mar 2017 20:15:31 +0000 (13:15 -0700)]
qpnp-fg-gen3: prime CC_SOC_SW when capacity learning begins
CC_SOC_SW can accumulate error over time and get saturated high
during capacity learning. Prime it to a value based on battery
SOC when capacity learning begins. This way, it can be ensured
that CC_SOC_SW doesn't saturate in a capacity learning cycle.
Change-Id: I2866ed6dadee84e84bf28fb08dc3a5a0ae353852
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Subbaraman Narayanamurthy [Wed, 15 Mar 2017 03:30:47 +0000 (20:30 -0700)]
qpnp-fg-gen3: fg-memif: Clear CLEAR_LOG bit in DMA_CTL after handling error
Currently, if a DMA error is present, SW sets CLEAR_LOG bit
in DMA_CTL register to clear it. Since this bit is not self
clearing, one has to reset this back to 0 after error handling
finishes.
Change-Id: I824543338f98e06661276da0364dcb6d7496f9cc
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Subbaraman Narayanamurthy [Wed, 15 Mar 2017 02:50:57 +0000 (19:50 -0700)]
power: qpnp-fg-gen3: allow negative Rconn configuration
In some cases, to offset the battery resistance which may be high
because of battery profile characterization and hardware layout,
negative connector resistance (Rconn) should be specified. Allow
configuring it.
Change-Id: Ief64ac13ba0a384a599fe6fffdbc0d093180d0b8
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Skylar Chang [Thu, 23 Mar 2017 23:17:14 +0000 (16:17 -0700)]
msm: ipa: add retry to channel stop
Add a retry mechanism when trying to stop a producer pipe.
This is to avoid a timeout on stop channel when IPA is busy.
Change-Id: If9e0df976def1195171730624e02c185142e2964
CRs-Fixed:
2024084
Acked-by: Ady Abraham <adya@qti.qualcomm.com>
Signed-off-by: Skylar Chang <chiaweic@codeaurora.org>
Odelu Kukatla [Thu, 23 Mar 2017 16:50:44 +0000 (22:20 +0530)]
msm: msm_bus: initialize the local variable
Initialize the local variable 'ret' which is returned
from the function.
Change-Id: Ie82e74ce55b622db924e353a6ea98323c7642fa6
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Linux Build Service Account [Thu, 23 Mar 2017 16:44:51 +0000 (09:44 -0700)]
Merge "msm: mdss: add checks to fail solid fill with scaling"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:49 +0000 (09:44 -0700)]
Merge "ARM: dts: msm: disable core_ctl for SDM630"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:48 +0000 (09:44 -0700)]
Merge "sched/core_ctl: Fix state_lock spinlock contention"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:47 +0000 (09:44 -0700)]
Merge "drm/msm: Take the mutex before calling msm_gem_new_impl"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:46 +0000 (09:44 -0700)]
Merge "msm: mdss: dp: fix check for audio support on the sink"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:45 +0000 (09:44 -0700)]
Merge "net: rmnet_data: Add support to configure custom device name"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:44 +0000 (09:44 -0700)]
Merge "usb: core: Enable xhci irq after starting controller"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:44 +0000 (09:44 -0700)]
Merge "arm64: kaslr: use callee saved register to preserve SCTLR across C call"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:43 +0000 (09:44 -0700)]
Merge "input: keyboard: add syscore_ops support to gpio_key driver"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:42 +0000 (09:44 -0700)]
Merge "devfreq_spdm: Handle spurious interrupts during bootup"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:41 +0000 (09:44 -0700)]
Merge "hwrng: Add quality parameter to msm-rng driver"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:40 +0000 (09:44 -0700)]
Merge "f_qc_rndis: Compile rndis.c if CONFIG_USB_F_QCRNDIS is enabled"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:40 +0000 (09:44 -0700)]
Merge "ARM: dts: msm: Add support for speed-bin 2 for MSM8996v3"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:39 +0000 (09:44 -0700)]
Merge "ARM: dts: msm: add panel physical dimensions for truly panel"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:38 +0000 (09:44 -0700)]
Merge "ASoC: msm_sdw: Avoid initial SSR notifications at bootup"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:37 +0000 (09:44 -0700)]
Merge "ASoC: wsa881x: Add mixer control to set WSA PA mute"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:36 +0000 (09:44 -0700)]
Merge "ASoC: sdm660_cdc: Fix 44.1 clip mute first time after boot"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:36 +0000 (09:44 -0700)]
Merge "ASoC: swr-wcd: Reduce latency for cold start on speaker"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:35 +0000 (09:44 -0700)]
Merge "ASoC: sdm660_cdc: fix HPH CnP on sdm660 internal codec"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:34 +0000 (09:44 -0700)]
Merge "ASoC: msm_sdw: Fix random mute on speaker when device switch"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:33 +0000 (09:44 -0700)]
Merge "ASoC: msm_sdw: Fix compander register setting for speaker"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:33 +0000 (09:44 -0700)]
Merge "ASoC: wcd-mbhc: Fix list del entry issue on mbhc variable"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:32 +0000 (09:44 -0700)]
Merge "pinctrl: qcom: correct register offset for lpi_gpio_16/17 on sdm660"
Linux Build Service Account [Thu, 23 Mar 2017 16:44:31 +0000 (09:44 -0700)]
Merge "ASoC: audio-ext-clk: correct pinctrl info for lpass mclk"