OSDN Git Service
Eric Dumazet [Wed, 10 Jan 2018 11:45:49 +0000 (03:45 -0800)]
ipv6: fix possible mem leaks in ipv6_make_skb()
[ Upstream commit
862c03ee1deb7e19e0f9931682e0294ecd1fcaf9 ]
ip6_setup_cork() might return an error, while memory allocations have
been done and must be rolled back.
Fixes:
6422398c2ab0 ("ipv6: introduce ipv6_make_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Reported-by: Mike Maloney <maloney@google.com>
Acked-by: Mike Maloney <maloney@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jerome Brunet [Wed, 3 Jan 2018 15:46:29 +0000 (16:46 +0100)]
net: stmmac: enable EEE in MII, GMII or RGMII only
[ Upstream commit
879626e3a52630316d817cbda7cec9a5446d1d82 ]
Note in the databook - Section 4.4 - EEE :
" The EEE feature is not supported when the MAC is configured to use the
TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC
supports multiple PHY interfaces, you should activate the EEE mode only
when the MAC is operating with GMII, MII, or RGMII interface."
Applying this restriction solves a stability issue observed on Amlogic
gxl platforms operating with RMII interface and the internal PHY.
Fixes:
83bf79b6bb64 ("stmmac: disable at run-time the EEE if not supported")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergei Shtylyov [Thu, 4 Jan 2018 18:06:49 +0000 (21:06 +0300)]
sh_eth: fix SH7757 GEther initialization
[ Upstream commit
5133550296d43236439494aa955bfb765a89f615 ]
Renesas SH7757 has 2 Fast and 2 Gigabit Ether controllers, while the
'sh_eth' driver can only reset and initialize TSU of the first controller
pair. Shimoda-san tried to solve that adding the 'needs_init' member to the
'struct sh_eth_plat_data', however the platform code still never sets this
flag. I think that we can infer this information from the 'devno' variable
(set to 'platform_device::id') and reset/init the Ether controller pair
only for an even 'devno'; therefore 'sh_eth_plat_data::needs_init' can be
removed...
Fixes:
150647fb2c31 ("net: sh_eth: change the condition of initialization")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergei Shtylyov [Wed, 3 Jan 2018 17:09:49 +0000 (20:09 +0300)]
sh_eth: fix TSU resource handling
[ Upstream commit
dfe8266b8dd10e12a731c985b725fcf7f0e537f0 ]
When switching the driver to the managed device API, I managed to break
the case of a dual Ether devices sharing a single TSU: the 2nd Ether port
wouldn't probe. Iwamatsu-san has tried to fix this but his patch was buggy
and he then dropped the ball...
The solution is to limit calling devm_request_mem_region() to the first
of the two ports sharing the same TSU, so devm_ioremap_resource() can't
be used anymore for the TSU resource...
Fixes:
d5e07e69218f ("sh_eth: use managed device API")
Reported-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mohamed Ghannam [Wed, 3 Jan 2018 21:06:06 +0000 (21:06 +0000)]
RDS: null pointer dereference in rds_atomic_free_op
[ Upstream commit
7d11f77f84b27cef452cee332f4e469503084737 ]
set rm->atomic.op_active to 0 when rds_pin_pages() fails
or the user supplied address is invalid,
this prevents a NULL pointer usage in rds_atomic_free_op()
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mohamed Ghannam [Tue, 2 Jan 2018 19:44:34 +0000 (19:44 +0000)]
RDS: Heap OOB write in rds_message_alloc_sgs()
[ Upstream commit
c095508770aebf1b9218e77026e48345d719b17c ]
When args->nr_local is 0, nr_pages gets also 0 due some size
calculation via rds_rm_size(), which is later used to allocate
pages for DMA, this bug produces a heap Out-Of-Bound write access
to a specific memory region.
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrii Vladyka [Thu, 4 Jan 2018 11:09:17 +0000 (13:09 +0200)]
net: core: fix module type in sock_diag_bind
[ Upstream commit
b8fd0823e0770c2d5fdbd865bccf0d5e058e5287 ]
Use AF_INET6 instead of AF_INET in IPv6-related code path
Signed-off-by: Andrii Vladyka <tulup@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eli Cooper [Mon, 25 Dec 2017 02:43:49 +0000 (10:43 +0800)]
ip6_tunnel: disable dst caching if tunnel is dual-stack
[ Upstream commit
23263ec86a5f44312d2899323872468752324107 ]
When an ip6_tunnel is in mode 'any', where the transport layer
protocol can be either 4 or 41, dst_cache must be disabled.
This is because xfrm policies might apply to only one of the two
protocols. Caching dst would cause xfrm policies for one protocol
incorrectly used for the other.
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Tue, 9 Jan 2018 21:40:41 +0000 (13:40 -0800)]
8021q: fix a memory leak for VLAN 0 device
[ Upstream commit
78bbb15f2239bc8e663aa20bbe1987c91a0b75f6 ]
A vlan device with vid 0 is allow to creat by not able to be fully
cleaned up by unregister_vlan_dev() which checks for vlan_id!=0.
Also, VLAN 0 is probably not a valid number and it is kinda
"reserved" for HW accelerating devices, but it is probably too
late to reject it from creation even if makes sense. Instead,
just remove the check in unregister_vlan_dev().
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes:
ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)")
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Tatashin [Fri, 12 Jan 2018 20:00:02 +0000 (15:00 -0500)]
x86/pti/efi: broken conversion from efi to kernel page table
In entry_64.S we have code like this:
/* Unconditionally use kernel CR3 for do_nmi() */
/* %rax is saved above, so OK to clobber here */
ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER
/* If PCID enabled, NOFLUSH now and NOFLUSH on return */
ALTERNATIVE "", "bts $63, %rax", X86_FEATURE_PCID
pushq %rax
/* mask off "user" bit of pgd address and 12 PCID bits: */
andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
movq %rax, %cr3
2:
/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
call do_nmi
With this instruction:
andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax
We unconditionally switch from whatever our CR3 was to kernel page table.
But, in arch/x86/platform/efi/efi_64.c We temporarily set a different page
table, that does not have the kernel page table with 0x1000 offset from it.
Look in efi_thunk() and efi_thunk_set_virtual_address_map().
So, while CR3 points to the other page table, we get an NMI interrupt,
and clear 0x1000 from CR3, resulting in a bogus CR3 if the 0x1000 bit was
set.
The efi page table comes from realmode/rm/trampoline_64.S:
arch/x86/realmode/rm/trampoline_64.S
141 .bss
142 .balign PAGE_SIZE
143 GLOBAL(trampoline_pgd) .space PAGE_SIZE
Notice: alignment is PAGE_SIZE, so after applying KAISER_SHADOW_PGD_OFFSET
which equal to PAGE_SIZE, we can get a different page table.
But, even if we fix alignment, here the trampoline binary is later copied
into dynamically allocated memory in reserve_real_mode(), so we need to
fix that place as well.
Fixes:
8a43ddfb93a0 ("KAISER: Kernel Address Isolation")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 13 Jan 2018 10:19:07 +0000 (11:19 +0100)]
Revert "userfaultfd: selftest: vm: allow to build in vm/ directory"
This reverts commit
b5213e1e9f25ccde958aa6364815ee87fef91100 which was
commit
46aa6a302b53f543f8e8b8e1714dc5e449ad36a6 upstream.
This is being reverted because the affected commit this was trying to
fix,
a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT"), was never
backported to the 4.4-stable tree.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Thu, 11 Jan 2018 17:01:36 +0000 (17:01 +0000)]
xhci: Fix ring leak in failure path of xhci_alloc_virt_device()
This is a stable-only fix for the backport of commit
5d9b70f7d52e
("xhci: Don't add a virt_dev to the devs array before it's fully
allocated").
In branches that predate commit
c5628a2af83a ("xhci: remove endpoint
ring cache") there is an additional failure path in
xhci_alloc_virt_device() where ring cache allocation fails, in
which case we need to free the ring allocated for endpoint 0.
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Ani Sinha [Fri, 18 Dec 2015 01:15:10 +0000 (17:15 -0800)]
sysrq: Fix warning in sysrq generated crash.
commit
984cf355aeaa8f2eda3861b50d0e8d3e3f77e83b upstream.
Commit
984d74a72076a1 ("sysrq: rcu-ify __handle_sysrq") replaced
spin_lock_irqsave() calls with rcu_read_lock() calls in sysrq. Since
rcu_read_lock() does not disable preemption, faulthandler_disabled() in
__do_page_fault() in x86/fault.c returns false. When the code later calls
might_sleep() in the pagefault handler, we get the following warning:
BUG: sleeping function called from invalid context at ../arch/x86/mm/fault.c:1187
in_atomic(): 0, irqs_disabled(): 0, pid: 4706, name: bash
Preemption disabled at:[<
ffffffff81484339>] printk+0x48/0x4a
To fix this, we release the RCU read lock before we crash.
Tested this patch on linux 3.18 by booting off one of our boards.
Fixes:
984d74a72076a1 ("sysrq: rcu-ify __handle_sysrq")
Signed-off-by: Ani Sinha <ani@arista.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Fri, 27 Nov 2015 15:50:43 +0000 (16:50 +0100)]
hwrng: core - sleep interruptible in read
commit
1ab87298cb59b649d8d648d25dc15b36ab865f5a upstream.
hwrng kthread can be waiting via hwrng_fillfn for some data from a rng
like virtio-rng:
hwrng D
ffff880093e17798 0 382 2 0x00000000
...
Call Trace:
[<
ffffffff817339c6>] wait_for_completion_killable+0x96/0x210
[<
ffffffffa00aa1b7>] virtio_read+0x57/0xf0 [virtio_rng]
[<
ffffffff814f4a35>] hwrng_fillfn+0x75/0x130
[<
ffffffff810aa243>] kthread+0xf3/0x110
And when some user program tries to read the /dev node in this state,
we get:
rngd D
ffff880093e17798 0 762 1 0x00000004
...
Call Trace:
[<
ffffffff817351ac>] mutex_lock_nested+0x15c/0x3e0
[<
ffffffff814f478e>] rng_dev_read+0x6e/0x240
[<
ffffffff81231958>] __vfs_read+0x28/0xe0
[<
ffffffff81232393>] vfs_read+0x83/0x130
And this is indeed unkillable. So use mutex_lock_interruptible
instead of mutex_lock in rng_dev_read and exit immediatelly when
interrupted. And possibly return already read data, if any (as POSIX
allows).
v2: use ERESTARTSYS instead of EINTR
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Kosina [Fri, 8 Jul 2016 09:38:28 +0000 (11:38 +0200)]
x86/mm/pat, /dev/mem: Remove superfluous error message
commit
39380b80d72723282f0ea1d1bbf2294eae45013e upstream.
Currently it's possible for broken (or malicious) userspace to flood a
kernel log indefinitely with messages a-la
Program dmidecode tried to access /dev/mem between f0000->100000
because range_is_allowed() is case of CONFIG_STRICT_DEVMEM being turned on
dumps this information each and every time devmem_is_allowed() fails.
Reportedly userspace that is able to trigger contignuous flow of these
messages exists.
It would be possible to rate limit this message, but that'd have a
questionable value; the administrator wouldn't get information about all
the failing accessess, so then the information would be both superfluous
and incomplete at the same time :)
Returning EPERM (which is what is actually happening) is enough indication
for userspace what has happened; no need to log this particular error as
some sort of special condition.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1607081137020.24757@cbobk.fhfr.pm
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 19 Apr 2017 16:59:22 +0000 (09:59 -0700)]
cx82310_eth: use skb_cow_head() to deal with cloned skbs
commit
a9e840a2081ed28c2b7caa6a9a0041c950b3c37d upstream.
We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.
skb_cow_head() is the proper helper to deal with this.
Fixes:
cc28a20e77b2 ("introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 19 Apr 2017 16:59:21 +0000 (09:59 -0700)]
smsc75xx: use skb_cow_head() to deal with cloned skbs
commit
b7c6d2675899cfff0180412c63fc9cbd5bacdb4d upstream.
We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.
skb_cow_head() is the proper helper to deal with this.
Fixes:
d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 19 Apr 2017 16:59:23 +0000 (09:59 -0700)]
sr9700: use skb_cow_head() to deal with cloned skbs
commit
d532c1082f68176363ed766d09bf187616e282fe upstream.
We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.
skb_cow_head() is the proper helper to deal with this.
Fixes:
c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 19 Apr 2017 16:59:24 +0000 (09:59 -0700)]
lan78xx: use skb_cow_head() to deal with cloned skbs
commit
d4ca73591916b760478d2b04334d5dcadc028e9c upstream.
We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.
skb_cow_head() is the proper helper to deal with this.
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hayeswang [Thu, 7 Jan 2016 09:51:12 +0000 (17:51 +0800)]
r8152: adjust ALDPS function
commit
cda9fb01dc3cafd718b2865b447e869bf6624ddd upstream.
Replace disable_aldps() and enable_aldps() with aldps_en().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hayeswang [Thu, 7 Jan 2016 09:51:11 +0000 (17:51 +0800)]
r8152: use test_and_clear_bit
commit
216a8349d3a0dd1bc2afbcc821e374c8f929bd62 upstream.
Replace test_bit() followed by clear_bit() with test_and_clear_bit().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hayeswang [Thu, 7 Jan 2016 09:12:17 +0000 (17:12 +0800)]
r8152: fix the wake event
commit
5ee3c60c8d3b88cab6496c9b7d49a01576dd9cf9 upstream.
When the autosuspend is enabled and occurs before system suspend, we should
wake the device before running system syspend. Then, we could change the wake
event for system suspend. Otherwise, the device would resume the system when
receiving any packet.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ulf Hansson [Mon, 25 Jan 2016 12:01:29 +0000 (13:01 +0100)]
usb: musb: ux500: Fix NULL pointer dereference at system PM
commit
79c5623f1cb85f33403eb9f1e45124e9f56181f8 upstream.
The commit
7d32cdef5356 ("usb: musb: fail with error when no DMA
controller set"), caused the core platform driver to correctly return an
error code when fail probing.
Unfurtante it also caused bug for a NULL pointer dereference, during
system suspend for the ux500 driver. The reason is a lacking validation
of the corresponding ->driver_data pointer, which won't be set when the
musb core driver fails to probe (or haven't yet been probed).
Fixes:
7d32cdef5356 ("usb: musb: fail with error when no DMA...")
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Tue, 27 Oct 2015 11:51:34 +0000 (09:51 -0200)]
usbvision fix overflow of interfaces array
commit
588afcc1c0e45358159090d95bf7b246fb67565f upstream.
This fixes the crash reported in:
http://seclists.org/bugtraq/2015/Oct/35
The interface number needs a sanity check.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Davidlohr Bueso [Mon, 25 Jan 2016 02:23:43 +0000 (18:23 -0800)]
locking/mutex: Allow next waiter lockless wakeup
commit
1329ce6fbbe4536592dfcfc8d64d61bfeb598fe6 upstream.
Make use of wake-queues and enable the wakeup to occur after releasing the
wait_lock. This is similar to what we do with rtmutex top waiter,
slightly shortening the critical region and allow other waiters to
acquire the wait_lock sooner. In low contention cases it can also help
the recently woken waiter to find the wait_lock available (fastpath)
when it continues execution.
Reviewed-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Waiman Long <waiman.long@hpe.com>
Cc: Will Deacon <Will.Deacon@arm.com>
Link: http://lkml.kernel.org/r/20160125022343.GA3322@linux-uzut.site
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jianyu Zhan [Mon, 7 Mar 2016 01:32:24 +0000 (09:32 +0800)]
futex: Replace barrier() in unqueue_me() with READ_ONCE()
commit
29b75eb2d56a714190a93d7be4525e617591077a upstream.
Commit
e91467ecd1ef ("bug in futex unqueue_me") introduced a barrier() in
unqueue_me() to prevent the compiler from rereading the lock pointer which
might change after a check for NULL.
Replace the barrier() with a READ_ONCE() for the following reasons:
1) READ_ONCE() is a weaker form of barrier() that affects only the specific
load operation, while barrier() is a general compiler level memory barrier.
READ_ONCE() was not available at the time when the barrier was added.
2) Aside of that READ_ONCE() is descriptive and self explainatory while a
barrier without comment is not clear to the casual reader.
No functional change.
[ tglx: Massaged changelog ]
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: dave@stgolabs.net
Cc: peterz@infradead.org
Cc: linux@rasmusvillemoes.dk
Cc: akpm@linux-foundation.org
Cc: fengguang.wu@intel.com
Cc: bigeasy@linutronix.de
Link: http://lkml.kernel.org/r/1457314344-5685-1-git-send-email-nasa4836@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Layton [Fri, 8 Jan 2016 12:30:43 +0000 (07:30 -0500)]
locks: don't check for race with close when setting OFD lock
commit
0752ba807b04ccd69cb4bc8bbf829a80ee208a3c upstream.
We don't clean out OFD locks on close(), so there's no need to check
for a race with them here. They'll get cleaned out at the same time
that flock locks are.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Dan Streetman [Mon, 27 Feb 2017 22:26:53 +0000 (14:26 -0800)]
zswap: don't param_set_charp while holding spinlock
commit
fd5bb66cd934987e49557455b6497fc006521940 upstream.
Change the zpool/compressor param callback function to release the
zswap_pools_lock spinlock before calling param_set_charp, since that
function may sleep when it calls kmalloc with GFP_KERNEL.
While this problem has existed for a while, I wasn't able to trigger it
using a tight loop changing either/both the zpool and compressor params; I
think it's very unlikely to be an issue on the stable kernels, especially
since most zswap users will change the compressor and/or zpool from sysfs
only one time each boot - or zero times, if they add the params to the
kernel boot.
Fixes:
c99b42c3529e ("zswap: use charp for zswap param strings")
Link: http://lkml.kernel.org/r/20170126155821.4545-1-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Streetman [Fri, 20 May 2016 23:59:54 +0000 (16:59 -0700)]
mm/zswap: use workqueue to destroy pool
commit
200867af4dedfe7cb707f96773684de1d1fd21e6 upstream.
Add a work_struct to struct zswap_pool, and change __zswap_pool_empty to
use the workqueue instead of using call_rcu().
When zswap destroys a pool no longer in use, it uses call_rcu() to
perform the destruction/freeing. Since that executes in softirq
context, it must not sleep. However, actually destroying the pool
involves freeing the per-cpu compressors (which requires locking the
cpu_add_remove_lock mutex) and freeing the zpool, for which the
implementation may sleep (e.g. zsmalloc calls kmem_cache_destroy, which
locks the slab_mutex). So if either mutex is currently taken, or any
other part of the compressor or zpool implementation sleeps, it will
result in a BUG().
It's not easy to reproduce this when changing zswap's params normally.
In testing with a loaded system, this does not fail:
$ cd /sys/module/zswap/parameters
$ echo lz4 > compressor ; echo zsmalloc > zpool
nor does this:
$ while true ; do
> echo lzo > compressor ; echo zbud > zpool
> sleep 1
> echo lz4 > compressor ; echo zsmalloc > zpool
> sleep 1
> done
although it's still possible either of those might fail, depending on
whether anything else besides zswap has locked the mutexes.
However, changing a parameter with no delay immediately causes the
schedule while atomic BUG:
$ while true ; do
> echo lzo > compressor ; echo lz4 > compressor
> done
This is essentially the same as Yu Zhao's proposed patch to zsmalloc,
but moved to zswap, to cover compressor and zpool freeing.
Fixes:
f1c54846ee45 ("zswap: dynamic pool creation")
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Streetman <dan.streetman@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Tue, 15 Mar 2016 21:55:27 +0000 (14:55 -0700)]
mm/page-writeback: fix dirty_ratelimit calculation
commit
d59b1087a98e402ed9a7cc577f4da435f9a555f5 upstream.
Calculation of dirty_ratelimit sometimes is not correct. E.g. initial
values of dirty_ratelimit == INIT_BW and step == 0, lead to the
following result:
UBSAN: Undefined behaviour in ../mm/page-writeback.c:1286:7
shift exponent 25600 is too large for 64-bit type 'long unsigned int'
The fix is straightforward - make step 0 if the shift exponent is too
big.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:57:48 +0000 (14:57 -0700)]
mm/compaction: pass only pageblock aligned range to pageblock_pfn_to_page
commit
e1409c325fdc1fef7b3d8025c51892355f065d15 upstream.
pageblock_pfn_to_page() is used to check there is valid pfn and all
pages in the pageblock is in a single zone. If there is a hole in the
pageblock, passing arbitrary position to pageblock_pfn_to_page() could
cause to skip whole pageblock scanning, instead of just skipping the
hole page. For deterministic behaviour, it's better to always pass
pageblock aligned range to pageblock_pfn_to_page(). It will also help
further optimization on pageblock_pfn_to_page() in the following patch.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joonsoo Kim [Tue, 15 Mar 2016 21:57:45 +0000 (14:57 -0700)]
mm/compaction: fix invalid free_pfn and compact_cached_free_pfn
commit
623446e4dc45b37740268165107cc63abb3022f0 upstream.
free_pfn and compact_cached_free_pfn are the pointer that remember
restart position of freepage scanner. When they are reset or invalid,
we set them to zone_end_pfn because freepage scanner works in reverse
direction. But, because zone range is defined as [zone_start_pfn,
zone_end_pfn), zone_end_pfn is invalid to access. Therefore, we should
not store it to free_pfn and compact_cached_free_pfn. Instead, we need
to store zone_end_pfn - 1 to them. There is one more thing we should
consider. Freepage scanner scan reversely by pageblock unit. If
free_pfn and compact_cached_free_pfn are set to middle of pageblock, it
regards that sitiation as that it already scans front part of pageblock
so we lose opportunity to scan there. To fix-up, this patch do
round_down() to guarantee that reset position will be pageblock aligned.
Note that thanks to the current pageblock_pfn_to_page() implementation,
actual access to zone_end_pfn doesn't happen until now. But, following
patch will change pageblock_pfn_to_page() so this patch is needed from
now on.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vikas C Sajjan [Thu, 16 Nov 2017 16:13:45 +0000 (21:43 +0530)]
x86/acpi: Reduce code duplication in mp_override_legacy_irq()
commit
4ee2ec1b122599f7b10c849fa7915cebb37b7edb upstream.
The new function mp_register_ioapic_irq() is a subset of the code in
mp_override_legacy_irq().
Replace the code duplication by invoking mp_register_ioapic_irq() from
mp_override_legacy_irq().
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: kkamagui@gmail.com
Cc: linux-acpi@vger.kernel.org
Link: https://lkml.kernel.org/r/1510848825-21965-3-git-send-email-vikas.cha.sajjan@hpe.com
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 4 Jan 2018 16:38:54 +0000 (17:38 +0100)]
ALSA: aloop: Fix racy hw constraints adjustment
commit
898dfe4687f460ba337a01c11549f87269a13fa2 upstream.
The aloop driver tries to update the hw constraints of the connected
target on the cable of the opened PCM substream. This is done by
adding the extra hw constraints rules referring to the substream
runtime->hw fields, while the other substream may update the runtime
hw of another side on the fly.
This is, however, racy and may result in the inconsistent values when
both PCM streams perform the prepare concurrently. One of the reason
is that it overwrites the other's runtime->hw field; which is not only
racy but also broken when it's called before the open of another side
finishes. And, since the reference to runtime->hw isn't protected,
the concurrent write may give the partial value update and become
inconsistent.
This patch is an attempt to fix and clean up:
- The prepare doesn't change the runtime->hw of other side any longer,
but only update the cable->hw that is referred commonly.
- The extra rules refer to the loopback_pcm object instead of the
runtime->hw. The actual hw is deduced from cable->hw.
- The extra rules take the cable_lock to protect against the race.
Fixes:
b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 5 Jan 2018 15:15:33 +0000 (16:15 +0100)]
ALSA: aloop: Fix inconsistent format due to incomplete rule
commit
b088b53e20c7d09b5ab84c5688e609f478e5c417 upstream.
The extra hw constraint rule for the formats the aloop driver
introduced has a slight flaw, where it doesn't return a positive value
when the mask got changed. It came from the fact that it's basically
a copy&paste from snd_hw_constraint_mask64(). The original code is
supposed to be a single-shot and it modifies the mask bits only once
and never after, while what we need for aloop is the dynamic hw rule
that limits the mask bits.
This difference results in the inconsistent state, as the hw_refine
doesn't apply the dependencies fully. The worse and surprisingly
result is that it causes a crash in OSS emulation when multiple
full-duplex reads/writes are performed concurrently (I leave why it
triggers Oops to readers as a homework).
For fixing this, replace a few open-codes with the standard
snd_mask_*() macros.
Reported-by: syzbot+3902b5220e8ca27889ca@syzkaller.appspotmail.com
Fixes:
b1c73fc8e697 ("ALSA: snd-aloop: Fix hw_params restrictions and checking")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 5 Jan 2018 15:09:47 +0000 (16:09 +0100)]
ALSA: aloop: Release cable upon open error path
commit
9685347aa0a5c2869058ca6ab79fd8e93084a67f upstream.
The aloop runtime object and its assignment in the cable are left even
when opening a substream fails. This doesn't mean any memory leak,
but it still keeps the invalid pointer that may be referred by the
another side of the cable spontaneously, which is a potential Oops
cause.
Clean up the cable assignment and the empty cable upon the error path
properly.
Fixes:
597603d615d2 ("ALSA: introduce the snd-aloop module for the PCM loopback")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 8 Jan 2018 13:03:53 +0000 (14:03 +0100)]
ALSA: pcm: Allow aborting mutex lock at OSS read/write loops
commit
900498a34a3ac9c611e9b425094c8106bdd7dc1c upstream.
PCM OSS read/write loops keep taking the mutex lock for the whole
read/write, and this might take very long when the exceptionally high
amount of data is given. Also, since it invokes with mutex_lock(),
the concurrent read/write becomes unbreakable.
This patch tries to address these issues by replacing mutex_lock()
with mutex_lock_interruptible(), and also splits / re-takes the lock
at each read/write period chunk, so that it can switch the context
more finely if requested.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 8 Jan 2018 12:58:31 +0000 (13:58 +0100)]
ALSA: pcm: Abort properly at pending signal in OSS read/write loops
commit
29159a4ed7044c52e3e2cf1a9fb55cec4745c60b upstream.
The loops for read and write in PCM OSS emulation have no proper check
of pending signals, and they keep processing even after user tries to
break. This results in a very long delay, often seen as RCU stall
when a huge unprocessed bytes remain queued. The bug could be easily
triggered by syzkaller.
As a simple workaround, this patch adds the proper check of pending
signals and aborts the loop appropriately.
Reported-by: syzbot+993cb4cfcbbff3947c21@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 4 Jan 2018 15:39:27 +0000 (16:39 +0100)]
ALSA: pcm: Add missing error checks in OSS emulation plugin builder
commit
6708913750344a900f2e73bfe4a4d6dbbce4fe8d upstream.
In the OSS emulation plugin builder where the frame size is parsed in
the plugin chain, some places miss the possible errors returned from
the plugin src_ or dst_frames callback.
This patch papers over such places.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 1 Jan 2018 08:50:50 +0000 (09:50 +0100)]
ALSA: pcm: Remove incorrect snd_BUG_ON() usages
commit
fe08f34d066f4404934a509b6806db1a4f700c86 upstream.
syzkaller triggered kernel warnings through PCM OSS emulation at
closing a stream:
WARNING: CPU: 0 PID: 3502 at sound/core/pcm_lib.c:1635
snd_pcm_hw_param_first+0x289/0x690 sound/core/pcm_lib.c:1635
Call Trace:
....
snd_pcm_hw_param_near.constprop.27+0x78d/0x9a0 sound/core/oss/pcm_oss.c:457
snd_pcm_oss_change_params+0x17d3/0x3720 sound/core/oss/pcm_oss.c:969
snd_pcm_oss_make_ready+0xaa/0x130 sound/core/oss/pcm_oss.c:1128
snd_pcm_oss_sync+0x257/0x830 sound/core/oss/pcm_oss.c:1638
snd_pcm_oss_release+0x20b/0x280 sound/core/oss/pcm_oss.c:2431
__fput+0x327/0x7e0 fs/file_table.c:210
....
This happens while it tries to open and set up the aloop device
concurrently. The warning above (invoked from snd_BUG_ON() macro) is
to detect the unexpected logical error where snd_pcm_hw_refine() call
shouldn't fail. The theory is true for the case where the hw_params
config rules are static. But for an aloop device, the hw_params rule
condition does vary dynamically depending on the connected target;
when another device is opened and changes the parameters, the device
connected in another side is also affected, and it caused the error
from snd_pcm_hw_refine().
That is, the simplest "solution" for this is to remove the incorrect
assumption of static rules, and treat such an error as a normal error
path. As there are a couple of other places using snd_BUG_ON()
incorrectly, this patch removes these spurious snd_BUG_ON() calls.
Reported-by: syzbot+6f11c7e2a1b91d466432@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean-Philippe Brucker [Thu, 14 Dec 2017 11:03:01 +0000 (11:03 +0000)]
iommu/arm-smmu-v3: Don't free page table ops twice
commit
57d72e159b60456c8bb281736c02ddd3164037aa upstream.
Kasan reports a double free when finalise_stage_fn fails: the io_pgtable
ops are freed by arm_smmu_domain_finalise and then again by
arm_smmu_domain_free. Prevent this by leaving pgtbl_ops empty on failure.
Fixes:
48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vikas C Sajjan [Thu, 16 Nov 2017 16:13:44 +0000 (21:43 +0530)]
x86/acpi: Handle SCI interrupts above legacy space gracefully
commit
252714155f04c5d16989cb3aadb85fd1b5772f99 upstream.
Platforms which support only IOAPIC mode, pass the SCI information above
the legacy space (0-15) via the FADT mechanism and not via MADT.
In such cases mp_override_legacy_irq() which is invoked from
acpi_sci_ioapic_setup() to register SCI interrupts fails for interrupts
greater equal 16, since it is meant to handle only the legacy space and
emits error "Invalid bus_irq %u for legacy override".
Add a new function to handle SCI interrupts >= 16 and invoke it
conditionally in acpi_sci_ioapic_setup().
The code duplication due to this new function will be cleaned up in a
separate patch.
Co-developed-by: Sunil V L <sunil.vl@hpe.com>
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Signed-off-by: Sunil V L <sunil.vl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Abdul Lateef Attar <abdul-lateef.attar@hpe.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: kkamagui@gmail.com
Cc: linux-acpi@vger.kernel.org
Link: https://lkml.kernel.org/r/1510848825-21965-2-git-send-email-vikas.cha.sajjan@hpe.com
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Wed, 30 Dec 2015 04:12:18 +0000 (20:12 -0800)]
x86/vsdo: Fix build on PARAVIRT_CLOCK=y, KVM_GUEST=n
commit
8705d603edd49f1cff165cd3b7998f4c7f098d27 upstream.
arch/x86/built-in.o: In function `arch_setup_additional_pages':
(.text+0x587): undefined reference to `pvclock_pvti_cpu0_va'
KVM_GUEST selects PARAVIRT_CLOCK, so we can make pvclock_pvti_cpu0_va depend
on KVM_GUEST.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/444d38a9bcba832685740ea1401b569861d09a72.1451446564.git.luto@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: James Dingwall <james@dingwall.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Mattson [Wed, 3 Jan 2018 22:31:38 +0000 (14:31 -0800)]
kvm: vmx: Scrub hardware GPRs at VM-exit
commit
0cb5b30698fdc8f6b4646012e3acb4ddce430788 upstream.
Guest GPR values are live in the hardware GPRs at VM-exit. Do not
leave any guest values in hardware GPRs after the guest GPR values are
saved to the vcpu_vmx structure.
This is a partial mitigation for CVE 2017-5715 and CVE 2017-5753.
Specifically, it defeats the Project Zero PoC for CVE 2017-5715.
Suggested-by: Eric Northup <digitaleric@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Eric Northup <digitaleric@google.com>
Reviewed-by: Benjamin Serebrin <serebrin@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
[Paolo: Add AMD bits, Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Wed, 20 Jan 2016 23:00:51 +0000 (15:00 -0800)]
net/mac80211/debugfs.c: prevent build failure with CONFIG_UBSAN=y
commit
68920c973254c5b71a684645c5f6f82d6732c5d6 upstream.
With upcoming CONFIG_UBSAN the following BUILD_BUG_ON in
net/mac80211/debugfs.c starts to trigger:
BUILD_BUG_ON(hw_flag_names[NUM_IEEE80211_HW_FLAGS] != (void *)0x1);
It seems, that compiler instrumentation causes some code
deoptimizations. Because of that GCC is not being able to resolve
condition in BUILD_BUG_ON() at compile time.
We could make size of hw_flag_names array unspecified and replace the
condition in BUILD_BUG_ON() with following:
ARRAY_SIZE(hw_flag_names) != NUM_IEEE80211_HW_FLAGS
That will have the same effect as before (adding new flag without
updating array will trigger build failure) except it doesn't fail with
CONFIG_UBSAN. As a bonus this patch slightly decreases size of
hw_flag_names array.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Daniel: backport to 4.4.]
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Mon, 11 Dec 2017 22:56:54 +0000 (22:56 +0000)]
MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accesses
commit
c8c5a3a24d395b14447a9a89d61586a913840a3b upstream.
Complement commit
c23b3d1a5311 ("MIPS: ptrace: Change GP regset to use
correct core dump register layout") and also reject outsized
PTRACE_SETREGSET requests to the NT_PRFPREG regset, like with the
NT_PRSTATUS regset.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes:
c23b3d1a5311 ("MIPS: ptrace: Change GP regset to use correct core dump register layout")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17930/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Mon, 11 Dec 2017 22:55:40 +0000 (22:55 +0000)]
MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSET
commit
006501e039eec411842bb3150c41358867d320c2 upstream.
Complement commit
d614fd58a283 ("mips/ptrace: Preserve previous
registers for short regset write") and like with the PTRACE_GETREGSET
ptrace(2) request also apply a BUILD_BUG_ON check for the size of the
`elf_fpreg_t' type in the PTRACE_SETREGSET request handler.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes:
d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17929/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Mon, 11 Dec 2017 22:54:33 +0000 (22:54 +0000)]
MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSA
commit
be07a6a1188372b6d19a3307ec33211fc9c9439d upstream.
Fix a commit
72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for
FP regset") public API regression, then activated by commit
1db1af84d6df
("MIPS: Basic MSA context switching support"), that caused the FCSR
register not to be read or written for CONFIG_CPU_HAS_MSA kernel
configurations (regardless of actual presence or absence of the MSA
feature in a given processor) with ptrace(2) PTRACE_GETREGSET and
PTRACE_SETREGSET requests nor recorded in core dumps.
This is because with !CONFIG_CPU_HAS_MSA configurations the whole of
`elf_fpregset_t' array is bulk-copied as it is, which includes the FCSR
in one half of the last, 33rd slot, whereas with CONFIG_CPU_HAS_MSA
configurations array elements are copied individually, and then only the
leading 32 FGR slots while the remaining slot is ignored.
Correct the code then such that only FGR slots are copied in the
respective !MSA and MSA helpers an then the FCSR slot is handled
separately in common code. Use `ptrace_setfcr31' to update the FCSR
too, so that the read-only mask is respected.
Retrieving a correct value of FCSR is important in debugging not only
for the human to be able to get the right interpretation of the
situation, but for correct operation of GDB as well. This is because
the condition code bits in FSCR are used by GDB to determine the
location to place a breakpoint at when single-stepping through an FPU
branch instruction. If such a breakpoint is placed incorrectly (i.e.
with the condition reversed), then it will be missed, likely causing the
debuggee to run away from the control of GDB and consequently breaking
the process of investigation.
Fortunately GDB continues using the older PTRACE_GETFPREGS ptrace(2)
request which is unaffected, so the regression only really hits with
post-mortem debug sessions using a core dump file, in which case
execution, and consequently single-stepping through branches is not
possible. Of course core files created by buggy kernels out there will
have the value of FCSR recorded clobbered, but such core files cannot be
corrected and the person using them simply will have to be aware that
the value of FCSR retrieved is not reliable.
Which also means we can likely get away without defining a replacement
API which would ensure a correct value of FSCR to be retrieved, or none
at all.
This is based on previous work by Alex Smith, extensively rewritten.
Signed-off-by: Alex Smith <alex@alex-smith.me.uk>
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes:
72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Mon, 11 Dec 2017 22:53:14 +0000 (22:53 +0000)]
MIPS: Consistently handle buffer counter with PTRACE_SETREGSET
commit
80b3ffce0196ea50068885d085ff981e4b8396f4 upstream.
Update commit
d614fd58a283 ("mips/ptrace: Preserve previous registers
for short regset write") bug and consistently consume all data supplied
to `fpr_set_msa' with the ptrace(2) PTRACE_SETREGSET request, such that
a zero data buffer counter is returned where insufficient data has been
given to fill a whole number of FP general registers.
In reality this is not going to happen, as the caller is supposed to
only supply data covering a whole number of registers and it is verified
in `ptrace_regset' and again asserted in `fpr_set', however structuring
code such that the presence of trailing partial FP general register data
causes `fpr_set_msa' to return with a non-zero data buffer counter makes
it appear that this trailing data will be used if there are subsequent
writes made to FP registers, which is going to be the case with the FCSR
once the missing write to that register has been fixed.
Fixes:
d614fd58a283 ("mips/ptrace: Preserve previous registers for short regset write")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17927/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Mon, 11 Dec 2017 22:52:15 +0000 (22:52 +0000)]
MIPS: Guard against any partial write attempt with PTRACE_SETREGSET
commit
dc24d0edf33c3e15099688b6bbdf7bdc24bf6e91 upstream.
Complement commit
d614fd58a283 ("mips/ptrace: Preserve previous
registers for short regset write") and ensure that no partial register
write attempt is made with PTRACE_SETREGSET, as we do not preinitialize
any temporaries used to hold incoming register data and consequently
random data could be written.
It is the responsibility of the caller, such as `ptrace_regset', to
arrange for writes to span whole registers only, so here we only assert
that it has indeed happened.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes:
72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17926/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Mon, 11 Dec 2017 22:51:35 +0000 (22:51 +0000)]
MIPS: Factor out NT_PRFPREG regset access helpers
commit
a03fe72572c12e98f4173f8a535f32468e48b6ec upstream.
In preparation to fix a commit
72b22bbad1e7 ("MIPS: Don't assume 64-bit
FP registers for FP regset") FCSR access regression factor out
NT_PRFPREG regset access helpers for the non-MSA and the MSA variants
respectively, to avoid having to deal with excessive indentation in the
actual fix.
No functional change, however use `target->thread.fpu.fpr[0]' rather
than `target->thread.fpu.fpr[i]' for FGR holding type size determination
as there's no `i' variable to refer to anymore, and for the factored out
`i' variable declaration use `unsigned int' rather than `unsigned' as
its type, following the common style.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes:
72b22bbad1e7 ("MIPS: Don't assume 64-bit FP registers for FP regset")
Cc: James Hogan <james.hogan@mips.com>
Cc: Paul Burton <Paul.Burton@mips.com>
Cc: Alex Smith <alex@alex-smith.me.uk>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17925/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Mon, 27 Nov 2017 09:33:03 +0000 (09:33 +0000)]
MIPS: Validate PR_SET_FP_MODE prctl(2) requests against the ABI of the task
commit
b67336eee3fcb8ecedc6c13e2bf88aacfa3151e2 upstream.
Fix an API loophole introduced with commit
9791554b45a2 ("MIPS,prctl:
add PR_[GS]ET_FP_MODE prctl options for MIPS"), where the caller of
prctl(2) is incorrectly allowed to make a change to CP0.Status.FR or
CP0.Config5.FRE register bits even if CONFIG_MIPS_O32_FP64_SUPPORT has
not been enabled, despite that an executable requesting the mode
requested via ELF file annotation would not be allowed to run in the
first place, or for n64 and n64 ABI tasks which do not have non-default
modes defined at all. Add suitable checks to `mips_set_process_fp_mode'
and bail out if an invalid mode change has been requested for the ABI in
effect, even if the FPU hardware or emulation would otherwise allow it.
Always succeed however without taking any further action if the mode
requested is the same as one already in effect, regardless of whether
any mode change, should it be requested, would actually be allowed for
the task concerned.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Fixes:
9791554b45a2 ("MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS")
Reviewed-by: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <james.hogan@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17800/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Wed, 3 Jan 2018 21:39:15 +0000 (13:39 -0800)]
IB/srpt: Disable RDMA access by the initiator
commit
bec40c26041de61162f7be9d2ce548c756ce0f65 upstream.
With the SRP protocol all RDMA operations are initiated by the target.
Since no RDMA operations are initiated by the initiator, do not grant
the initiator permission to submit RDMA reads or writes to the target.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfgang Grandegger [Wed, 13 Dec 2017 18:52:23 +0000 (19:52 +0100)]
can: gs_usb: fix return value of the "set_bittiming" callback
commit
d5b42e6607661b198d8b26a0c30969605b1bf5c7 upstream.
The "set_bittiming" callback treats a positive return value as error!
For that reason "can_changelink()" will quit silently after setting
the bittiming values without processing ctrlmode, restart-ms, etc.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wanpeng Li [Fri, 15 Dec 2017 01:40:50 +0000 (17:40 -0800)]
KVM: Fix stack-out-of-bounds read in write_mmio
commit
e39d200fa5bf5b94a0948db0dae44c1b73b84a56 upstream.
Reported by syzkaller:
BUG: KASAN: stack-out-of-bounds in write_mmio+0x11e/0x270 [kvm]
Read of size 8 at addr
ffff8803259df7f8 by task syz-executor/32298
CPU: 6 PID: 32298 Comm: syz-executor Tainted: G OE 4.15.0-rc2+ #18
Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016
Call Trace:
dump_stack+0xab/0xe1
print_address_description+0x6b/0x290
kasan_report+0x28a/0x370
write_mmio+0x11e/0x270 [kvm]
emulator_read_write_onepage+0x311/0x600 [kvm]
emulator_read_write+0xef/0x240 [kvm]
emulator_fix_hypercall+0x105/0x150 [kvm]
em_hypercall+0x2b/0x80 [kvm]
x86_emulate_insn+0x2b1/0x1640 [kvm]
x86_emulate_instruction+0x39a/0xb90 [kvm]
handle_exception+0x1b4/0x4d0 [kvm_intel]
vcpu_enter_guest+0x15a0/0x2640 [kvm]
kvm_arch_vcpu_ioctl_run+0x549/0x7d0 [kvm]
kvm_vcpu_ioctl+0x479/0x880 [kvm]
do_vfs_ioctl+0x142/0x9a0
SyS_ioctl+0x74/0x80
entry_SYSCALL_64_fastpath+0x23/0x9a
The path of patched vmmcall will patch 3 bytes opcode 0F 01 C1(vmcall)
to the guest memory, however, write_mmio tracepoint always prints 8 bytes
through *(u64 *)val since kvm splits the mmio access into 8 bytes. This
leaks 5 bytes from the kernel stack (CVE-2017-17741). This patch fixes
it by just accessing the bytes which we operate on.
Before patch:
syz-executor-5567 [007] .... 51370.561696: kvm_mmio: mmio write len 3 gpa 0x10 val 0x1ffff10077c1010f
After patch:
syz-executor-13416 [002] .... 51302.299573: kvm_mmio: mmio write len 3 gpa 0x10 val 0xc1010f
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suren Baghdasaryan [Wed, 6 Dec 2017 17:27:30 +0000 (09:27 -0800)]
dm bufio: fix shrinker scans when (nr_to_scan < retain_target)
commit
fbc7c07ec23c040179384a1f16b62b6030eb6bdd upstream.
When system is under memory pressure it is observed that dm bufio
shrinker often reclaims only one buffer per scan. This change fixes
the following two issues in dm bufio shrinker that cause this behavior:
1. ((nr_to_scan - freed) <= retain_target) condition is used to
terminate slab scan process. This assumes that nr_to_scan is equal
to the LRU size, which might not be correct because do_shrink_slab()
in vmscan.c calculates nr_to_scan using multiple inputs.
As a result when nr_to_scan is less than retain_target (64) the scan
will terminate after the first iteration, effectively reclaiming one
buffer per scan and making scans very inefficient. This hurts vmscan
performance especially because mutex is acquired/released every time
dm_bufio_shrink_scan() is called.
New implementation uses ((LRU size - freed) <= retain_target)
condition for scan termination. LRU size can be safely determined
inside __scan() because this function is called after dm_bufio_lock().
2. do_shrink_slab() uses value returned by dm_bufio_shrink_count() to
determine number of freeable objects in the slab. However dm_bufio
always retains retain_target buffers in its LRU and will terminate
a scan when this mark is reached. Therefore returning the entire LRU size
from dm_bufio_shrink_count() is misleading because that does not
represent the number of freeable objects that slab will reclaim during
a scan. Returning (LRU size - retain_target) better represents the
number of freeable objects in the slab. This way do_shrink_slab()
returns 0 when (LRU size < retain_target) and vmscan will not try to
scan this shrinker avoiding scans that will not reclaim any memory.
Test: tested using Android device running
<AOSP>/system/extras/alloc-stress that generates memory pressure
and causes intensive shrinker scans
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 10 Jan 2018 08:27:15 +0000 (09:27 +0100)]
Linux 4.4.111
Greg Kroah-Hartman [Tue, 9 Jan 2018 09:24:02 +0000 (10:24 +0100)]
Fix build error in vma.c
This fixes the following much-reported build issue:
arch/x86/entry/vdso/vma.c: In function ‘map_vdso’:
arch/x86/entry/vdso/vma.c:175:9: error:
implicit declaration of function ‘pvclock_pvti_cpu0_va’
on some arches and configurations.
Thanks to Guenter for being persistent enough to get it fixed :)
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Thu, 4 Jan 2018 16:42:45 +0000 (17:42 +0100)]
Map the vsyscall page with _PAGE_USER
This needs to happen early in kaiser_pagetable_walk(), before the
hierarchy is established so that _PAGE_USER permission can be really
set.
A proper fix would be to teach kaiser_pagetable_walk() to update those
permissions but the vsyscall page is the only exception here so ...
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Dobriyan [Sat, 8 Oct 2016 00:02:14 +0000 (17:02 -0700)]
proc: much faster /proc/vmstat
commit
68ba0326b4e14988f9e0c24a6e12a85cf2acd1ca upstream.
Every current KDE system has process named ksysguardd polling files
below once in several seconds:
$ strace -e trace=open -p $(pidof ksysguardd)
Process 1812 attached
open("/etc/mtab", O_RDONLY|O_CLOEXEC) = 8
open("/etc/mtab", O_RDONLY|O_CLOEXEC) = 8
open("/proc/net/dev", O_RDONLY) = 8
open("/proc/net/wireless", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/proc/stat", O_RDONLY) = 8
open("/proc/vmstat", O_RDONLY) = 8
Hell knows what it is doing but speed up reading /proc/vmstat by 33%!
Benchmark is open+read+close 1.000.000 times.
BEFORE
$ perf stat -r 10 taskset -c 3 ./proc-vmstat
Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs):
13146.768464 task-clock (msec) # 0.960 CPUs utilized ( +- 0.60% )
15 context-switches # 0.001 K/sec ( +- 1.41% )
1 cpu-migrations # 0.000 K/sec ( +- 11.11% )
104 page-faults # 0.008 K/sec ( +- 0.57% )
45,489,799,349 cycles # 3.460 GHz ( +- 0.03% )
9,970,175,743 stalled-cycles-frontend # 21.92% frontend cycles idle ( +- 0.10% )
2,800,298,015 stalled-cycles-backend # 6.16% backend cycles idle ( +- 0.32% )
79,241,190,850 instructions # 1.74 insn per cycle
# 0.13 stalled cycles per insn ( +- 0.00% )
17,616,096,146 branches # 1339.956 M/sec ( +- 0.00% )
176,106,232 branch-misses # 1.00% of all branches ( +- 0.18% )
13.
691078109 seconds time elapsed ( +- 0.03% )
^^^^^^^^^^^^
AFTER
$ perf stat -r 10 taskset -c 3 ./proc-vmstat
Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs):
8688.353749 task-clock (msec) # 0.950 CPUs utilized ( +- 1.25% )
10 context-switches # 0.001 K/sec ( +- 2.13% )
1 cpu-migrations # 0.000 K/sec
104 page-faults # 0.012 K/sec ( +- 0.56% )
30,384,010,730 cycles # 3.497 GHz ( +- 0.07% )
12,296,259,407 stalled-cycles-frontend # 40.47% frontend cycles idle ( +- 0.13% )
3,370,668,651 stalled-cycles-backend # 11.09% backend cycles idle ( +- 0.69% )
28,969,052,879 instructions # 0.95 insn per cycle
# 0.42 stalled cycles per insn ( +- 0.01% )
6,308,245,891 branches # 726.058 M/sec ( +- 0.00% )
214,685,502 branch-misses # 3.40% of all branches ( +- 0.26% )
9.
146081052 seconds time elapsed ( +- 0.07% )
^^^^^^^^^^^
vsnprintf() is slow because:
1. format_decode() is busy looking for format specifier: 2 branches
per character (not in this case, but in others)
2. approximately million branches while parsing format mini language
and everywhere
3. just look at what string() does /proc/vmstat is good case because
most of its content are strings
Link: http://lkml.kernel.org/r/20160806125455.GA1187@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Libor Pechacek [Wed, 13 Apr 2016 01:36:12 +0000 (11:06 +0930)]
module: Issue warnings when tainting kernel
commit
3205c36cf7d96024626f92d65f560035df1abcb2 upstream.
While most of the locations where a kernel taint bit is set are accompanied
with a warning message, there are two which set their bits silently. If
the tainting module gets unloaded later on, it is almost impossible to tell
what was the reason for setting the flag.
Signed-off-by: Libor Pechacek <lpechacek@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miroslav Benes [Thu, 26 Nov 2015 02:48:06 +0000 (13:18 +1030)]
module: keep percpu symbols in module's symtab
commit
e0224418516b4d8a6c2160574bac18447c354ef0 upstream.
Currently, percpu symbols from .data..percpu ELF section of a module are
not copied over and stored in final symtab array of struct module.
Consequently such symbol cannot be returned via kallsyms API (for
example kallsyms_lookup_name). This can be especially confusing when the
percpu symbol is exported. Only its __ksymtab et al. are present in its
symtab.
The culprit is in layout_and_allocate() function where SHF_ALLOC flag is
dropped for .data..percpu section. There is in fact no need to copy the
section to final struct module, because kernel module loader allocates
extra percpu section by itself. Unfortunately only symbols from
SHF_ALLOC sections are copied due to a check in is_core_symbol().
The patch changes is_core_symbol() function to copy over also percpu
symbols (their st_shndx points to .data..percpu ELF section). We do it
only if CONFIG_KALLSYMS_ALL is set to be consistent with the rest of the
function (ELF section is SHF_ALLOC but !SHF_EXECINSTR). Finally
elf_type() returns type 'a' for a percpu symbol because its address is
absolute.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Marek [Wed, 9 Dec 2015 14:08:21 +0000 (15:08 +0100)]
genksyms: Handle string literals with spaces in reference files
commit
a78f70e8d65e88b9f631d073f68cb26dcd746298 upstream.
The reference files use spaces to separate tokens, however, we must
preserve spaces inside string literals. Currently the only case in the
tree is struct edac_raw_error_desc in <linux/edac.h>:
$ KBUILD_SYMTYPES=1 make -s drivers/edac/amd64_edac.symtypes
$ mv drivers/edac/amd64_edac.{symtypes,symref}
$ KBUILD_SYMTYPES=1 make -s drivers/edac/amd64_edac.symtypes
drivers/edac/amd64_edac.c:527: warning: amd64_get_dram_hole_info: modversion changed because of changes in struct edac_raw_error_desc
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Thu, 4 Jan 2018 21:19:04 +0000 (22:19 +0100)]
x86/tlb: Drop the _GPL from the cpu_tlbstate export
commit
1e5476815fd7f98b888e01a0f9522b63085f96c9 upstream.
The recent changes for PTI touch cpu_tlbstate from various tlb_flush
inlines. cpu_tlbstate is exported as GPL symbol, so this causes a
regression when building out of tree drivers for certain graphics cards.
Aside of that the export was wrong since it was introduced as it should
have been EXPORT_PER_CPU_SYMBOL_GPL().
Use the correct PER_CPU export and drop the _GPL to restore the previous
state which allows users to utilize the cards they payed for.
As always I'm really thrilled to make this kind of change to support the
#friends (or however the hot hashtag of today is spelled) from that closet
sauce graphics corp.
Fixes:
1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")
Fixes:
6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches")
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Tue, 2 Jan 2018 19:36:44 +0000 (20:36 +0100)]
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
commit
88776c0e70be0290f8357019d844aae15edaa967 upstream.
Qemu for PARISC reported on a 32bit SMP parisc kernel strange failures
about "Not-handled unaligned insn 0x0e8011d6 and 0x0c2011c9."
Those opcodes evaluate to the ldcw() assembly instruction which requires
(on 32bit) an alignment of 16 bytes to ensure atomicity.
As it turns out, qemu is correct and in our assembly code in entry.S and
pacache.S we don't pay attention to the required alignment.
This patch fixes the problem by aligning the lock offset in assembly
code in the same manner as we do in our C-code.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Lendacky [Thu, 30 Nov 2017 22:46:40 +0000 (16:46 -0600)]
x86/microcode/AMD: Add support for fam17h microcode loading
commit
f4e9b7af0cd58dd039a0fb2cd67d57cea4889abf upstream.
The size for the Microcode Patch Block (MPB) for an AMD family 17h
processor is 3200 bytes. Add a #define for fam17h so that it does
not default to 2048 bytes and fail a microcode load/update.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171130224640.15391.40247.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alice Ferrazzi <alicef@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Ma [Sun, 26 Nov 2017 00:48:41 +0000 (16:48 -0800)]
Input: elantech - add new icbody type 15
commit
10d900303f1c3a821eb0bef4e7b7ece16768fba4 upstream.
The touchpad of Lenovo Thinkpad L480 reports it's version as 15.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vineet Gupta [Fri, 8 Dec 2017 16:26:58 +0000 (08:26 -0800)]
ARC: uaccess: dont use "l" gcc inline asm constraint modifier
commit
79435ac78d160e4c245544d457850a56f805ac0d upstream.
This used to setup the LP_COUNT register automatically, but now has been
removed.
There was an earlier fix
3c7c7a2fc8811 which fixed instance in delay.h but
somehow missed this one as gcc change had not made its way into
production toolchains and was not pedantic as it is now !
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Fri, 17 Nov 2017 23:30:08 +0000 (15:30 -0800)]
kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in complete_signal()
commit
426915796ccaf9c2bd9bb06dc5702225957bc2e5 upstream.
complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy
the thread group, today this is wrong in many ways.
If nothing else, fatal_signal_pending() should always imply that the
whole thread group (except ->group_exit_task if it is not NULL) is
killed, this check breaks the rule.
After the previous changes we can rely on sig_task_ignored();
sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want
to kill this task and sig == SIGKILL OR it is traced and debugger can
intercept the signal.
This should hopefully fix the problem reported by Dmitry. This
test-case
static int init(void *arg)
{
for (;;)
pause();
}
int main(void)
{
char stack[16 * 1024];
for (;;) {
int pid = clone(init, stack + sizeof(stack)/2,
CLONE_NEWPID | SIGCHLD, NULL);
assert(pid > 0);
assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0);
assert(waitpid(-1, NULL, WSTOPPED) == pid);
assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0);
assert(syscall(__NR_tkill, pid, SIGKILL) == 0);
assert(pid == wait(NULL));
}
}
triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in
task_participate_group_stop(). do_signal_stop()->signal_group_exit()
checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending()
checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING.
And his should fix the minor security problem reported by Kyle,
SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the
task is the root of a pid namespace.
Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Kyle Huey <me@kylehuey.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Fri, 17 Nov 2017 23:30:04 +0000 (15:30 -0800)]
kernel/signal.c: protect the SIGNAL_UNKILLABLE tasks from !sig_kernel_only() signals
commit
ac25385089f673560867eb5179228a44ade0cfc1 upstream.
Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only()
signals even if force == T. This simplifies the next change and this
matches the same check in get_signal() which will drop these signals
anyway.
Link: http://lkml.kernel.org/r/20171103184227.GC21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Fri, 17 Nov 2017 23:30:01 +0000 (15:30 -0800)]
kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILL
commit
628c1bcba204052d19b686b5bac149a644cdb72e upstream.
The comment in sig_ignored() says "Tracers may want to know about even
ignored signals" but SIGKILL can not be reported to debugger and it is
just wrong to return 0 in this case: SIGKILL should only kill the
SIGNAL_UNKILLABLE task if it comes from the parent ns.
Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on
sig_task_ignored().
SISGTOP coming from within the namespace is not really right too but at
least debugger can intercept it, and we can't drop it here because this
will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add
another ->ptrace check later, we will see.
Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thiago Rafael Becker [Thu, 14 Dec 2017 23:33:12 +0000 (15:33 -0800)]
kernel: make groups_sort calling a responsibility group_info allocators
commit
bdcf0a423ea1c40bbb40e7ee483b50fc8aa3d758 upstream.
In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.
This patch:
- Make groups_sort globally visible.
- Move the call to groups_sort to the modifiers of group_info
- Remove the call to groups_sort from set_groups
Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.com
Signed-off-by: Thiago Rafael Becker <thiago.becker@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Tue, 2 Jan 2018 10:02:19 +0000 (10:02 +0000)]
fscache: Fix the default for fscache_maybe_release_page()
commit
98801506552593c9b8ac11021b0cdad12cab4f6b upstream.
Fix the default for fscache_maybe_release_page() for when the cookie isn't
valid or the page isn't cached. It mustn't return false as that indicates
the page cannot yet be freed.
The problem with the default is that if, say, there's no cache, but a
network filesystem's pages are using up almost all the available memory, a
system can OOM because the filesystem ->releasepage() op will not allow
them to be released as fscache_maybe_release_page() incorrectly prevents
it.
This can be tested by writing a sequence of 512MiB files to an AFS mount.
It does not affect NFS or CIFS because both of those wrap the call in a
check of PG_fscache and it shouldn't bother Ceph as that only has
PG_private set whilst writeback is in progress. This might be an issue for
9P, however.
Note that the pages aren't entirely stuck. Removing a file or unmounting
will clear things because that uses ->invalidatepage() instead.
Fixes:
201a15428bd5 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Brüns [Mon, 27 Nov 2017 19:05:34 +0000 (20:05 +0100)]
sunxi-rsb: Include OF based modalias in device uevent
commit
e2bf801ecd4e62222a46d1ba9e57e710171d29c1 upstream.
Include the OF-based modalias in the uevent sent when registering devices
on the sunxi RSB bus, so that user space has a chance to autoload the
kernel module for the device.
Fixes a regression caused by commit
3f241bfa60bd ("arm64: allwinner: a64:
pine64: Use dcdc1 regulator for mmc0"). When the axp20x-rsb module for
the AXP803 PMIC is built as a module, it is not loaded and the system
ends up with an disfunctional MMC controller.
Fixes:
d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Wed, 20 Dec 2017 22:28:25 +0000 (14:28 -0800)]
crypto: pcrypt - fix freeing pcrypt instances
commit
d76c68109f37cb85b243a1cf0f40313afd2bae68 upstream.
pcrypt is using the old way of freeing instances, where the ->free()
method specified in the 'struct crypto_template' is passed a pointer to
the 'struct crypto_instance'. But the crypto_instance is being
kfree()'d directly, which is incorrect because the memory was actually
allocated as an aead_instance, which contains the crypto_instance at a
nonzero offset. Thus, the wrong pointer was being kfree()'d.
Fix it by switching to the new way to free aead_instance's where the
->free() method is specified in the aead_instance itself.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes:
0496f56065e0 ("crypto: pcrypt - Add support for new AEAD interface")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 11 Dec 2017 20:15:17 +0000 (12:15 -0800)]
crypto: chacha20poly1305 - validate the digest size
commit
e57121d08c38dabec15cf3e1e2ad46721af30cae upstream.
If the rfc7539 template was instantiated with a hash algorithm with
digest size larger than 16 bytes (POLY1305_DIGEST_SIZE), then the digest
overran the 'tag' buffer in 'struct chachapoly_req_ctx', corrupting the
subsequent memory, including 'cryptlen'. This caused a crash during
crypto_skcipher_decrypt().
Fix it by, when instantiating the template, requiring that the
underlying hash algorithm has the digest size expected for Poly1305.
Reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
int algfd, reqfd;
struct sockaddr_alg addr = {
.salg_type = "aead",
.salg_name = "rfc7539(chacha20,sha256)",
};
unsigned char buf[32] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (void *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, buf, sizeof(buf));
reqfd = accept(algfd, 0, 0);
write(reqfd, buf, 16);
read(reqfd, buf, 16);
}
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes:
71ebc4d1b27d ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Engelhardt [Tue, 19 Dec 2017 18:09:07 +0000 (19:09 +0100)]
crypto: n2 - cure use after free
commit
203f45003a3d03eea8fa28d74cfc74c354416fdb upstream.
queue_cache_init is first called for the Control Word Queue
(n2_crypto_probe). At that time, queue_cache[0] is NULL and a new
kmem_cache will be allocated. If the subsequent n2_register_algs call
fails, the kmem_cache will be released in queue_cache_destroy, but
queue_cache_init[0] is not set back to NULL.
So when the Module Arithmetic Unit gets probed next (n2_mau_probe),
queue_cache_init will not allocate a kmem_cache again, but leave it
as its bogus value, causing a BUG() to trigger when queue_cache[0] is
eventually passed to kmem_cache_zalloc:
n2_crypto: Found N2CP at /virtual-devices@100/n2cp@7
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
n2_crypto: md5 alg registration failed
n2cp
f028687c: /virtual-devices@100/n2cp@7: Unable to register algorithms.
called queue_cache_destroy
n2cp: probe of
f028687c failed with error -22
n2_crypto: Found NCP at /virtual-devices@100/ncp@6
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
kernel BUG at mm/slab.c:2993!
Call Trace:
[
0000000000604488] kmem_cache_alloc+0x1a8/0x1e0
(inlined) kmem_cache_zalloc
(inlined) new_queue
(inlined) spu_queue_setup
(inlined) handle_exec_unit
[
0000000010c61eb4] spu_mdesc_scan+0x1f4/0x460 [n2_crypto]
[
0000000010c62b80] n2_mau_probe+0x100/0x220 [n2_crypto]
[
000000000084b174] platform_drv_probe+0x34/0xc0
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Fri, 5 Jan 2018 00:17:49 +0000 (16:17 -0800)]
kernel/acct.c: fix the acct->needcheck check in check_free_space()
commit
4d9570158b6260f449e317a5f9ed030c2504a615 upstream.
As Tsukada explains, the time_is_before_jiffies(acct->needcheck) check
is very wrong, we need time_is_after_jiffies() to make sys_acct() work.
Ignoring the overflows, the code should "goto out" if needcheck >
jiffies, while currently it checks "needcheck < jiffies" and thus in the
likely case check_free_space() does nothing until jiffies overflow.
In particular this means that sys_acct() is simply broken, acct_on()
sets acct->needcheck = jiffies and expects that check_free_space()
should set acct->active = 1 after the free-space check, but this won't
happen if jiffies increments in between.
This was broken by commit
32dc73086015 ("get rid of timer in
kern/acct.c") in 2011, then another (correct) commit
795a2f22a8ea
("acct() should honour the limits from the very beginning") made the
problem more visible.
Link: http://lkml.kernel.org/r/20171213133940.GA6554@redhat.com
Fixes:
32dc73086015 ("get rid of timer in kern/acct.c")
Reported-by: TSUKADA Koutaro <tsukada@ascade.co.jp>
Suggested-by: TSUKADA Koutaro <tsukada@ascade.co.jp>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Mon, 11 Jan 2016 12:51:19 +0000 (15:51 +0300)]
x86/kasan: Write protect kasan zero shadow
commit
063fb3e56f6dd29b2633b678b837e1d904200e6f upstream.
After kasan_init() executed, no one is allowed to write to kasan_zero_page,
so write protect it.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1452516679-32040-3-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 5 Jan 2018 14:44:27 +0000 (15:44 +0100)]
Linux 4.4.110
Guenter Roeck [Thu, 4 Jan 2018 21:41:55 +0000 (13:41 -0800)]
kaiser: Set _PAGE_NX only if supported
This resolves a crash if loaded under qemu + haxm under windows.
See https://www.spinics.net/lists/kernel/msg2689835.html for details.
Here is a boot log (the log is from chromeos-4.4, but Tao Wu says that
the same log is also seen with vanilla v4.4.110-rc1).
[ 0.712750] Freeing unused kernel memory: 552K
[ 0.721821] init: Corrupted page table at address
57b029b332e0
[ 0.722761] PGD
80000000bb238067 PUD
bc36a067 PMD
bc369067 PTE
45d2067
[ 0.722761] Bad pagetable: 000b [#1] PREEMPT SMP
[ 0.722761] Modules linked in:
[ 0.722761] CPU: 1 PID: 1 Comm: init Not tainted 4.4.96 #31
[ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014
[ 0.722761] task:
ffff8800bc290000 ti:
ffff8800bc28c000 task.ti:
ffff8800bc28c000
[ 0.722761] RIP: 0010:[<
ffffffff83f4129e>] [<
ffffffff83f4129e>] __clear_user+0x42/0x67
[ 0.722761] RSP: 0000:
ffff8800bc28fcf8 EFLAGS:
00010202
[ 0.722761] RAX:
0000000000000000 RBX:
00000000000001a4 RCX:
00000000000001a4
[ 0.722761] RDX:
0000000000000000 RSI:
0000000000000008 RDI:
000057b029b332e0
[ 0.722761] RBP:
ffff8800bc28fd08 R08:
ffff8800bc290000 R09:
ffff8800bb2f4000
[ 0.722761] R10:
ffff8800bc290000 R11:
ffff8800bb2f4000 R12:
000057b029b332e0
[ 0.722761] R13:
0000000000000000 R14:
000057b029b33340 R15:
ffff8800bb1e2a00
[ 0.722761] FS:
0000000000000000(0000) GS:
ffff8800bfb00000(0000) knlGS:
0000000000000000
[ 0.722761] CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
[ 0.722761] CR2:
000057b029b332e0 CR3:
00000000bb2f8000 CR4:
00000000000006e0
[ 0.722761] Stack:
[ 0.722761]
000057b029b332e0 ffff8800bb95fa80 ffff8800bc28fd18 ffffffff83f4120c
[ 0.722761]
ffff8800bc28fe18 ffffffff83e9e7a1 ffff8800bc28fd68 0000000000000000
[ 0.722761]
ffff8800bc290000 ffff8800bc290000 ffff8800bc290000 ffff8800bc290000
[ 0.722761] Call Trace:
[ 0.722761] [<
ffffffff83f4120c>] clear_user+0x2e/0x30
[ 0.722761] [<
ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7
[ 0.722761] [<
ffffffff83de2088>] search_binary_handler+0x86/0x19c
[ 0.722761] [<
ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98
[ 0.722761] [<
ffffffff844febe0>] ? rest_init+0x87/0x87
[ 0.722761] [<
ffffffff83de40be>] do_execve+0x23/0x25
[ 0.722761] [<
ffffffff83c002e3>] run_init_process+0x2b/0x2d
[ 0.722761] [<
ffffffff844fec4d>] kernel_init+0x6d/0xda
[ 0.722761] [<
ffffffff84505b2f>] ret_from_fork+0x3f/0x70
[ 0.722761] [<
ffffffff844febe0>] ? rest_init+0x87/0x87
[ 0.722761] Code: 86 84 be 12 00 00 00 e8 87 0d e8 ff 66 66 90 48 89 d8 48 c1
eb 03 4c 89 e7 83 e0 07 48 89 d9 be 08 00 00 00 31 d2 48 85 c9 74 0a <48> 89 17
48 01 f7 ff c9 75 f6 48 89 c1 85 c9 74 09 88 17 48 ff
[ 0.722761] RIP [<
ffffffff83f4129e>] __clear_user+0x42/0x67
[ 0.722761] RSP <
ffff8800bc28fcf8>
[ 0.722761] ---[ end trace
def703879b4ff090 ]---
[ 0.722761] BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/v4.4/kernel/locking/rwsem.c:21
[ 0.722761] in_atomic(): 0, irqs_disabled(): 1, pid: 1, name: init
[ 0.722761] CPU: 1 PID: 1 Comm: init Tainted: G D 4.4.96 #31
[ 0.722761] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014
[ 0.722761]
0000000000000086 dcb5d76098c89836 ffff8800bc28fa30 ffffffff83f34004
[ 0.722761]
ffffffff84839dc2 0000000000000015 ffff8800bc28fa40 ffffffff83d57dc9
[ 0.722761]
ffff8800bc28fa68 ffffffff83d57e6a ffffffff84a53640 0000000000000000
[ 0.722761] Call Trace:
[ 0.722761] [<
ffffffff83f34004>] dump_stack+0x4d/0x63
[ 0.722761] [<
ffffffff83d57dc9>] ___might_sleep+0x13a/0x13c
[ 0.722761] [<
ffffffff83d57e6a>] __might_sleep+0x9f/0xa6
[ 0.722761] [<
ffffffff84502788>] down_read+0x20/0x31
[ 0.722761] [<
ffffffff83cc5d9b>] __blocking_notifier_call_chain+0x35/0x63
[ 0.722761] [<
ffffffff83cc5ddd>] blocking_notifier_call_chain+0x14/0x16
[ 0.800374] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 0.722761] [<
ffffffff83cefe97>] profile_task_exit+0x1a/0x1c
[ 0.802309] [<
ffffffff83cac84e>] do_exit+0x39/0xe7f
[ 0.802309] [<
ffffffff83ce5938>] ? vprintk_default+0x1d/0x1f
[ 0.802309] [<
ffffffff83d7bb95>] ? printk+0x57/0x73
[ 0.802309] [<
ffffffff83c46e25>] oops_end+0x80/0x85
[ 0.802309] [<
ffffffff83c7b747>] pgtable_bad+0x8a/0x95
[ 0.802309] [<
ffffffff83ca7f4a>] __do_page_fault+0x8c/0x352
[ 0.802309] [<
ffffffff83eefba5>] ? file_has_perm+0xc4/0xe5
[ 0.802309] [<
ffffffff83ca821c>] do_page_fault+0xc/0xe
[ 0.802309] [<
ffffffff84507682>] page_fault+0x22/0x30
[ 0.802309] [<
ffffffff83f4129e>] ? __clear_user+0x42/0x67
[ 0.802309] [<
ffffffff83f4127f>] ? __clear_user+0x23/0x67
[ 0.802309] [<
ffffffff83f4120c>] clear_user+0x2e/0x30
[ 0.802309] [<
ffffffff83e9e7a1>] load_elf_binary+0xa7f/0x18f7
[ 0.802309] [<
ffffffff83de2088>] search_binary_handler+0x86/0x19c
[ 0.802309] [<
ffffffff83de389e>] do_execveat_common.isra.26+0x909/0xf98
[ 0.802309] [<
ffffffff844febe0>] ? rest_init+0x87/0x87
[ 0.802309] [<
ffffffff83de40be>] do_execve+0x23/0x25
[ 0.802309] [<
ffffffff83c002e3>] run_init_process+0x2b/0x2d
[ 0.802309] [<
ffffffff844fec4d>] kernel_init+0x6d/0xda
[ 0.802309] [<
ffffffff84505b2f>] ret_from_fork+0x3f/0x70
[ 0.802309] [<
ffffffff844febe0>] ? rest_init+0x87/0x87
[ 0.830559] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 0.830559]
[ 0.831305] Kernel Offset: 0x2c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 0.831305] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
The crash part of this problem may be solved with the following patch
(thanks to Hugh for the hint). There is still another problem, though -
with this patch applied, the qemu session aborts with "VCPU Shutdown
request", whatever that means.
Cc: lepton <ytht.net@gmail.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Ryabinin [Mon, 11 Jan 2016 12:51:18 +0000 (15:51 +0300)]
x86/kasan: Clear kasan_zero_page after TLB flush
commit
69e0210fd01ff157d332102219aaf5c26ca8069b upstream.
Currently we clear kasan_zero_page before __flush_tlb_all(). This
works with current implementation of native_flush_tlb[_global]()
because it doesn't cause do any writes to kasan shadow memory.
But any subtle change made in native_flush_tlb*() could break this.
Also current code seems doesn't work for paravirt guests (lguest).
Only after the TLB flush we can be sure that kasan_zero_page is not
used as early shadow anymore (instrumented code will not write to it).
So it should cleared it only after the TLB flush.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1452516679-32040-2-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jamie Iles <jamie.iles@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Fri, 11 Dec 2015 03:20:20 +0000 (19:20 -0800)]
x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap
commit
dac16fba6fc590fa7239676b35ed75dae4c4cd2b upstream.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/9d37826fdc7e2d2809efe31d5345f97186859284.1449702533.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jamie Iles <jamie.iles@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Fri, 11 Dec 2015 03:20:19 +0000 (19:20 -0800)]
x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader
commit
6b078f5de7fc0851af4102493c7b5bb07e49c4cb upstream.
The pvclock vdso code was too abstracted to understand easily
and excessively paranoid. Simplify it for a huge speedup.
This opens the door for additional simplifications, as the vdso
no longer accesses the pvti for any vcpu other than vcpu 0.
Before, vclock_gettime using kvm-clock took about 45ns on my
machine. With this change, it takes 29ns, which is almost as
fast as the pure TSC implementation.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/6b51dcc41f1b101f963945c5ec7093d72bdac429.1449702533.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jamie Iles <jamie.iles@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Wed, 3 Jan 2018 18:43:32 +0000 (10:43 -0800)]
KPTI: Report when enabled
Make sure dmesg reports when KPTI is enabled.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Wed, 3 Jan 2018 18:43:15 +0000 (10:43 -0800)]
KPTI: Rename to PAGE_TABLE_ISOLATION
This renames CONFIG_KAISER to CONFIG_PAGE_TABLE_ISOLATION.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Mon, 25 Dec 2017 12:57:16 +0000 (13:57 +0100)]
x86/kaiser: Move feature detection up
... before the first use of kaiser_enabled as otherwise funky
things happen:
about to get started...
(XEN) d0v0 Unhandled page fault fault/trap [#14, ec=0000]
(XEN) Pagetable walk from
ffff88022a449090:
(XEN) L4[0x110] =
0000000229e0e067 0000000000001e0e
(XEN) L3[0x008] =
0000000000000000 ffffffffffffffff
(XEN) domain_crash_sync called from entry.S: fault at
ffff82d08033fd08
entry.o#create_bounce_frame+0x135/0x14d
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-4.9.1_02-3.21 x86_64 debug=n Not tainted ]----
(XEN) CPU: 0
(XEN) RIP: e033:[<
ffffffff81007460>]
(XEN) RFLAGS:
0000000000000286 EM: 1 CONTEXT: pv guest (d0v0)
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Kosina [Tue, 2 Jan 2018 13:19:49 +0000 (14:19 +0100)]
kaiser: disabled on Xen PV
Kaiser cannot be used on paravirtualized MMUs (namely reading and writing CR3).
This does not work with KAISER as the CR3 switch from and to user space PGD
would require to map the whole XEN_PV machinery into both.
More importantly, enabling KAISER on Xen PV doesn't make too much sense, as PV
guests use distinct %cr3 values for kernel and user already.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Tue, 2 Jan 2018 13:19:49 +0000 (14:19 +0100)]
x86/kaiser: Reenable PARAVIRT
Now that the required bits have been addressed, reenable
PARAVIRT.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Mon, 4 Dec 2017 14:07:30 +0000 (15:07 +0100)]
x86/paravirt: Dont patch flush_tlb_single
commit
a035795499ca1c2bd1928808d1a156eda1420383 upstream
native_flush_tlb_single() will be changed with the upcoming
PAGE_TABLE_ISOLATION feature. This requires to have more code in
there than INVLPG.
Remove the paravirt patching for it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: linux-mm@kvack.org
Cc: michael.schwarz@iaik.tugraz.at
Cc: moritz.lipp@iaik.tugraz.at
Cc: richard.fellner@student.tugraz.at
Link: https://lkml.kernel.org/r/20171204150606.828111617@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Sun, 5 Nov 2017 01:43:06 +0000 (18:43 -0700)]
kaiser: kaiser_flush_tlb_on_return_to_user() check PCID
Let kaiser_flush_tlb_on_return_to_user() do the X86_FEATURE_PCID
check, instead of each caller doing it inline first: nobody needs
to optimize for the noPCID case, it's clearer this way, and better
suits later changes. Replace those no-op X86_CR3_PCID_KERN_FLUSH lines
by a BUILD_BUG_ON() in load_new_mm_cr3(), in case something changes.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Sun, 5 Nov 2017 01:23:24 +0000 (18:23 -0700)]
kaiser: asm/tlbflush.h handle noPGE at lower level
I found asm/tlbflush.h too twisty, and think it safer not to avoid
__native_flush_tlb_global_irq_disabled() in the kaiser_enabled case,
but instead let it handle kaiser_enabled along with cr3: it can just
use __native_flush_tlb() for that, no harm in re-disabling preemption.
(This is not the same change as Kirill and Dave have suggested for
upstream, flipping PGE in cr4: that's neat, but needs a cpu_has_pge
check; cr3 is enough for kaiser, and thought to be cheaper than cr4.)
Also delete the X86_FEATURE_INVPCID invpcid_flush_all_nonglobals()
preference from __native_flush_tlb(): unlike the invpcid_flush_all()
preference in __native_flush_tlb_global(), it's not seen in upstream
4.14, and was recently reported to be surprisingly slow.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Sun, 29 Oct 2017 18:36:19 +0000 (11:36 -0700)]
kaiser: drop is_atomic arg to kaiser_pagetable_walk()
I have not observed a might_sleep() warning from setup_fixmap_gdt()'s
use of kaiser_add_mapping() in our tree (why not?), but like upstream
we have not provided a way for that to pass is_atomic true down to
kaiser_pagetable_walk(), and at startup it's far from a likely source
of trouble: so just delete the walk's is_atomic arg and might_sleep().
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Wed, 4 Oct 2017 03:49:04 +0000 (20:49 -0700)]
kaiser: use ALTERNATIVE instead of x86_cr3_pcid_noflush
Now that we're playing the ALTERNATIVE game, use that more efficient
method: instead of user-mapping an extra page, and reading an extra
cacheline each time for x86_cr3_pcid_noflush.
Neel has found that __stringify(bts $X86_CR3_PCID_NOFLUSH_BIT, %rax)
is a working substitute for the "bts $63, %rax" in these ALTERNATIVEs;
but the one line with $63 in looks clearer, so let's stick with that.
Worried about what happens with an ALTERNATIVE between the jump and
jump label in another ALTERNATIVE? I was, but have checked the
combinations in SWITCH_KERNEL_CR3_NO_STACK at entry_SYSCALL_64,
and it does a good job.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Tue, 2 Jan 2018 13:19:48 +0000 (14:19 +0100)]
x86/kaiser: Check boottime cmdline params
AMD (and possibly other vendors) are not affected by the leak
KAISER is protecting against.
Keep the "nopti" for traditional reasons and add pti=<on|off|auto>
like upstream.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Tue, 2 Jan 2018 13:19:48 +0000 (14:19 +0100)]
x86/kaiser: Rename and simplify X86_FEATURE_KAISER handling
Concentrate it in arch/x86/mm/kaiser.c and use the upstream string "nopti".
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Sun, 24 Sep 2017 23:59:49 +0000 (16:59 -0700)]
kaiser: add "nokaiser" boot option, using ALTERNATIVE
Added "nokaiser" boot option: an early param like "noinvpcid".
Most places now check int kaiser_enabled (#defined 0 when not
CONFIG_KAISER) instead of #ifdef CONFIG_KAISER; but entry_64.S
and entry_64_compat.S are using the ALTERNATIVE technique, which
patches in the preferred instructions at runtime. That technique
is tied to x86 cpu features, so X86_FEATURE_KAISER is fabricated.
Prior to "nokaiser", Kaiser #defined _PAGE_GLOBAL 0: revert that,
but be careful with both _PAGE_GLOBAL and CR4.PGE: setting them when
nokaiser like when !CONFIG_KAISER, but not setting either when kaiser -
neither matters on its own, but it's hard to be sure that _PAGE_GLOBAL
won't get set in some obscure corner, or something add PGE into CR4.
By omitting _PAGE_GLOBAL from __supported_pte_mask when kaiser_enabled,
all page table setup which uses pte_pfn() masks it out of the ptes.
It's slightly shameful that the same declaration versus definition of
kaiser_enabled appears in not one, not two, but in three header files
(asm/kaiser.h, asm/pgtable.h, asm/tlbflush.h). I felt safer that way,
than with #including any of those in any of the others; and did not
feel it worth an asm/kaiser_enabled.h - kernel/cpu/common.c includes
them all, so we shall hear about it if they get out of synch.
Cleanups while in the area: removed the silly #ifdef CONFIG_KAISER
from kaiser.c; removed the unused native_get_normal_pgd(); removed
the spurious reg clutter from SWITCH_*_CR3 macro stubs; corrected some
comments. But more interestingly, set CR4.PSE in secondary_startup_64:
the manual is clear that it does not matter whether it's 0 or 1 when
4-level-pts are enabled, but I was distracted to find cr4 different on
BSP and auxiliaries - BSP alone was adding PSE, in probe_page_size_mask().
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Tue, 5 Dec 2017 04:13:35 +0000 (20:13 -0800)]
kaiser: fix unlikely error in alloc_ldt_struct()
An error from kaiser_add_mapping() here is not at all likely, but
Eric Biggers rightly points out that __free_ldt_struct() relies on
new_ldt->size being initialized: move that up.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Fri, 13 Oct 2017 19:10:00 +0000 (12:10 -0700)]
kaiser: _pgd_alloc() without __GFP_REPEAT to avoid stalls
Synthetic filesystem mempressure testing has shown softlockups, with
hour-long page allocation stalls, and pgd_alloc() trying for order:1
with __GFP_REPEAT in one of the backtraces each time.
That's _pgd_alloc() going for a Kaiser double-pgd, using the __GFP_REPEAT
common to all page table allocations, but actually having no effect on
order:0 (see should_alloc_oom() and should_continue_reclaim() in this
tree, but beware that ports to another tree might behave differently).
Order:1 stack allocation has been working satisfactorily without
__GFP_REPEAT forever, and page table allocation only asks __GFP_REPEAT
for awkward occasions in a long-running process: it's not appropriate
at fork or exec time, and seems to be doing much more harm than good:
getting those contiguous pages under very heavy mempressure can be
hard (though even without it, Kaiser does generate more mempressure).
Mask out that __GFP_REPEAT inside _pgd_alloc(). Why not take it out
of the PGALLOG_GFP altogether, as v4.7 commit
a3a9a59d2067 ("x86: get
rid of superfluous __GFP_REPEAT") did? Because I think that might
make a difference to our page table memcg charging, which I'd prefer
not to interfere with at this time.
hughd adds: __alloc_pages_slowpath() in the 4.4.89-stable tree handles
__GFP_REPEAT a little differently than in prod kernel or 3.18.72-stable,
so it may not always be exactly a no-op on order:0 pages, as said above;
but I think still appropriate to omit it from Kaiser or non-Kaiser pgd.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hugh Dickins [Wed, 27 Sep 2017 01:43:07 +0000 (18:43 -0700)]
kaiser: paranoid_entry pass cr3 need to paranoid_exit
Neel Natu points out that paranoid_entry() was wrong to assume that
an entry that did not need swapgs would not need SWITCH_KERNEL_CR3:
paranoid_entry (used for debug breakpoint, int3, double fault or MCE;
though I think it's only the MCE case that is cause for concern here)
can break in at an awkward time, between cr3 switch and swapgs, but
its handling always needs kernel gs and kernel cr3.
Easy to fix in itself, but paranoid_entry() also needs to convey to
paranoid_exit() (and my reading of macro idtentry says paranoid_entry
and paranoid_exit are always paired) how to restore the prior state.
The swapgs state is already conveyed by %ebx (0 or 1), so extend that
also to convey when SWITCH_USER_CR3 will be needed (2 or 3).
(Yes, I'd much prefer that 0 meant no swapgs, whereas it's the other
way round: and a convention shared with error_entry() and error_exit(),
which I don't want to touch. Perhaps I should have inverted the bit
for switch cr3 too, but did not.)
paranoid_exit() would be straightforward, except for TRACE_IRQS: it
did TRACE_IRQS_IRETQ when doing swapgs, but TRACE_IRQS_IRETQ_DEBUG
when not: which is it supposed to use when SWITCH_USER_CR3 is split
apart from that? As best as I can determine, commit
5963e317b1e9
("ftrace/x86: Do not change stacks in DEBUG when calling lockdep")
missed the swapgs case, and should have used TRACE_IRQS_IRETQ_DEBUG
there too (the discrepancy has nothing to do with the liberal use
of _NO_STACK and _UNSAFE_STACK hereabouts: TRACE_IRQS_OFF_DEBUG has
just been used in all cases); discrepancy lovingly preserved across
several paranoid_exit() cleanups, but I'm now removing it.
Neel further indicates that to use SWITCH_USER_CR3_NO_STACK there in
paranoid_exit() is now not only unnecessary but unsafe: might corrupt
syscall entry's unsafe_stack_register_backup of %rax. Just use
SWITCH_USER_CR3: and delete SWITCH_USER_CR3_NO_STACK altogether,
before we make the mistake of using it again.
hughd adds: this commit fixes an issue in the Kaiser-without-PCIDs
part of the series, and ought to be moved earlier, if you decided
to make a release of Kaiser-without-PCIDs.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>