OSDN Git Service
Nicholas Piggin [Tue, 9 May 2023 09:16:00 +0000 (19:16 +1000)]
powerpc/pseries: Remove unused hcall tracing instruction
When JUMP_LABEL=n, the tracepoint refcount test in the pre-call stores
the refcount value to the stack, so the same value can be used for the
post-call (presumably to avoid racing with the value concurrently
changing).
On little-endian (ELFv2) that might have just worked by luck, because
32(r1) is STK_PARAM(R3) there and so the value save gets clobbered by
the tracing code when it's non-zero, but fortunately r3 is the hcall
number and 0 is an invalid hcall number so it should get clobbered by
another non-zero value. In any case, commit
cc1adb5f32557
("powerpc/pseries: Use jump labels for hcall tracepoints") removed the
code that actually used the value stored, so now it's just dead code.
It's fragile to be storing to the stack like this, and confusing. Better
remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-2-npiggin@gmail.com
Nicholas Piggin [Tue, 9 May 2023 09:15:59 +0000 (19:15 +1000)]
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
With JUMP_LABEL=n, hcall_tracepoint_refcount's address is being tested
instead of its value. This results in the tracing slowpath always being
taken unnecessarily.
Fixes:
9a10ccb29c0a2 ("powerpc/pseries: move hcall_tracepoint_refcount out of .toc")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-1-npiggin@gmail.com
Krzysztof Kozlowski [Wed, 5 Jul 2023 14:57:43 +0000 (16:57 +0200)]
powerpc: dts: add missing space before {
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230705145743.292855-1-krzysztof.kozlowski@linaro.org
Jialin Zhang [Tue, 15 Aug 2023 02:33:03 +0000 (10:33 +0800)]
powerpc/eeh: Use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it mannually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230815023303.3515503-1-zhangjialin11@huawei.com
Michael Ellerman [Wed, 29 Mar 2023 23:43:08 +0000 (10:43 +1100)]
powerpc/64s: Move CPU -mtune options into Kconfig
Currently the -mtune options are set in the Makefile, depending on what
the compiler supports.
One downside of doing it that way is that the chosen -mtune option is
not recorded in the .config.
Another downside is that if there's ever a need to do more complicated
logic to calculate the correct option, that gets messy in the Makefile.
So move the determination of which -mtune option to use into Kconfig
logic.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230329234308.2215833-1-mpe@ellerman.id.au
Michael Ellerman [Mon, 21 Aug 2023 14:09:49 +0000 (00:09 +1000)]
powerpc/powermac: Fix unused function warning
Clang reports:
arch/powerpc/platforms/powermac/feature.c:137:19: error: unused function 'simple_feature_tweak'
It's only used inside the #ifndef CONFIG_PPC64 block, so move it in
there to fix the warning. While at it drop the inline, the compiler will
decide whether it should be inlined or not.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202308181501.AR5HMDWC-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230821140949.491881-1-mpe@ellerman.id.au
Russell Currey [Wed, 23 Aug 2023 05:53:17 +0000 (15:53 +1000)]
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:
BUG: using smp_processor_id() in preemptible [
00000000] code: grep/10693
caller is lparcfg_data+0x408/0x19a0
CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
Call Trace:
dump_stack_lvl+0x154/0x200 (unreliable)
check_preemption_disabled+0x214/0x220
lparcfg_data+0x408/0x19a0
...
This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.
Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.
Fixes:
f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
Michael Ellerman [Wed, 23 Aug 2023 05:53:16 +0000 (15:53 +1000)]
powerpc: Don't include lppaca.h in paca.h
By adding a forward declaration for struct lppaca we can untangle paca.h
and lppaca.h. Also move get_lppaca() into lppaca.h for consistency.
Add includes of lppaca.h to some files that need it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-3-mpe@ellerman.id.au
Michael Ellerman [Wed, 23 Aug 2023 05:53:15 +0000 (15:53 +1000)]
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
Consolidate the two prototypes for hcall_vphn() into vphn.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-2-mpe@ellerman.id.au
Michael Ellerman [Wed, 23 Aug 2023 05:53:14 +0000 (15:53 +1000)]
powerpc/pseries: Move VPHN constants into vphn.h
These don't have any particularly good reason to belong in lppaca.h,
move them into their own header.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-1-mpe@ellerman.id.au
Michael Ellerman [Wed, 23 Aug 2023 04:48:03 +0000 (14:48 +1000)]
cxl: Drop unused detach_spa()
Clang warns:
drivers/misc/cxl/native.c:272:20: error: unused function 'detach_spa' [-Werror,-Wunused-function]
It was created as part of some refactoring in commit
05155772f642 ("cxl:
Allocate and release the SPA with the AFU"), but has never been called
in its current form. Drop it.
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823044803.737175-1-mpe@ellerman.id.au
Michael Ellerman [Wed, 23 Aug 2023 05:54:30 +0000 (15:54 +1000)]
powerpc: Drop zalloc_maybe_bootmem()
The only callers of zalloc_maybe_bootmem() are PCI setup routines. These
used to be called early during boot before slab setup, and also during
runtime due to hotplug.
But commit
5537fcb319d0 ("powerpc/pci: Add ppc_md.discover_phbs()")
moved the boot-time calls later, after slab setup, meaning there's no
longer any need for zalloc_maybe_bootmem(), kzalloc() can be used in all
cases.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055430.752550-1-mpe@ellerman.id.au
Michael Ellerman [Mon, 21 Aug 2023 14:28:20 +0000 (00:28 +1000)]
powerpc/powernv: Use struct opal_prd_msg in more places
Use the newly added struct opal_prd_msg in some other functions that
operate on opal_prd messages, rather than using other types.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230821142820.497107-2-mpe@ellerman.id.au
Michael Ellerman [Mon, 21 Aug 2023 14:28:19 +0000 (00:28 +1000)]
powerpc/powernv: Fix fortify source warnings in opal-prd.c
As reported by Mahesh & Aneesh, opal_prd_msg_notifier() triggers a
FORTIFY_SOURCE warning:
memcpy: detected field-spanning write (size 32) of single field "&item->msg" at arch/powerpc/platforms/powernv/opal-prd.c:355 (size 4)
WARNING: CPU: 9 PID: 660 at arch/powerpc/platforms/powernv/opal-prd.c:355 opal_prd_msg_notifier+0x174/0x188 [opal_prd]
NIP opal_prd_msg_notifier+0x174/0x188 [opal_prd]
LR opal_prd_msg_notifier+0x170/0x188 [opal_prd]
Call Trace:
opal_prd_msg_notifier+0x170/0x188 [opal_prd] (unreliable)
notifier_call_chain+0xc0/0x1b0
atomic_notifier_call_chain+0x2c/0x40
opal_message_notify+0xf4/0x2c0
This happens because the copy is targeting item->msg, which is only 4
bytes in size, even though the enclosing item was allocated with extra
space following the msg.
To fix the warning define struct opal_prd_msg with a union of the header
and a flex array, and have the memcpy target the flex array.
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reported-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230821142820.497107-1-mpe@ellerman.id.au
Christophe Leroy [Tue, 22 Aug 2023 06:13:13 +0000 (08:13 +0200)]
powerpc/85xx: Mark some functions static and add missing includes to fix no previous prototype error
corenet{32/64}_smp_defconfig leads to:
CC arch/powerpc/sysdev/ehv_pic.o
arch/powerpc/sysdev/ehv_pic.c:45:6: error: no previous prototype for 'ehv_pic_unmask_irq' [-Werror=missing-prototypes]
45 | void ehv_pic_unmask_irq(struct irq_data *d)
| ^~~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:52:6: error: no previous prototype for 'ehv_pic_mask_irq' [-Werror=missing-prototypes]
52 | void ehv_pic_mask_irq(struct irq_data *d)
| ^~~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:59:6: error: no previous prototype for 'ehv_pic_end_irq' [-Werror=missing-prototypes]
59 | void ehv_pic_end_irq(struct irq_data *d)
| ^~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:66:6: error: no previous prototype for 'ehv_pic_direct_end_irq' [-Werror=missing-prototypes]
66 | void ehv_pic_direct_end_irq(struct irq_data *d)
| ^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:71:5: error: no previous prototype for 'ehv_pic_set_affinity' [-Werror=missing-prototypes]
71 | int ehv_pic_set_affinity(struct irq_data *d, const struct cpumask *dest,
| ^~~~~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/ehv_pic.c:112:5: error: no previous prototype for 'ehv_pic_set_irq_type' [-Werror=missing-prototypes]
112 | int ehv_pic_set_irq_type(struct irq_data *d, unsigned int flow_type)
| ^~~~~~~~~~~~~~~~~~~~
CC arch/powerpc/sysdev/fsl_rio.o
arch/powerpc/sysdev/fsl_rio.c:102:5: error: no previous prototype for 'fsl_rio_mcheck_exception' [-Werror=missing-prototypes]
102 | int fsl_rio_mcheck_exception(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/fsl_rio.c:306:5: error: no previous prototype for 'fsl_map_inb_mem' [-Werror=missing-prototypes]
306 | int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
| ^~~~~~~~~~~~~~~
arch/powerpc/sysdev/fsl_rio.c:357:6: error: no previous prototype for 'fsl_unmap_inb_mem' [-Werror=missing-prototypes]
357 | void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
| ^~~~~~~~~~~~~~~~~
arch/powerpc/sysdev/fsl_rio.c:445:5: error: no previous prototype for 'fsl_rio_setup' [-Werror=missing-prototypes]
445 | int fsl_rio_setup(struct platform_device *dev)
| ^~~~~~~~~~~~~
CC arch/powerpc/sysdev/fsl_rmu.o
arch/powerpc/sysdev/fsl_rmu.c:362:6: error: no previous prototype for 'msg_unit_error_handler' [-Werror=missing-prototypes]
362 | void msg_unit_error_handler(void)
| ^~~~~~~~~~~~~~~~~~~~~~
CC arch/powerpc/platforms/85xx/corenet_generic.o
arch/powerpc/platforms/85xx/corenet_generic.c:33:13: error: no previous prototype for 'corenet_gen_pic_init' [-Werror=missing-prototypes]
33 | void __init corenet_gen_pic_init(void)
| ^~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/85xx/corenet_generic.c:51:13: error: no previous prototype for 'corenet_gen_setup_arch' [-Werror=missing-prototypes]
51 | void __init corenet_gen_setup_arch(void)
| ^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/85xx/corenet_generic.c:104:12: error: no previous prototype for 'corenet_gen_publish_devices' [-Werror=missing-prototypes]
104 | int __init corenet_gen_publish_devices(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
CC arch/powerpc/platforms/85xx/qemu_e500.o
arch/powerpc/platforms/85xx/qemu_e500.c:28:13: error: no previous prototype for 'qemu_e500_pic_init' [-Werror=missing-prototypes]
28 | void __init qemu_e500_pic_init(void)
| ^~~~~~~~~~~~~~~~~~
CC arch/powerpc/kernel/pmc.o
arch/powerpc/kernel/pmc.c:78:6: error: no previous prototype for 'power4_enable_pmcs' [-Werror=missing-prototypes]
78 | void power4_enable_pmcs(void)
| ^~~~~~~~~~~~~~~~~~
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c90780017b624b91771a3e4240dcbadc68137915.1692684784.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 22 Aug 2023 06:07:50 +0000 (08:07 +0200)]
powerpc/64e: Fix circular dependency with CONFIG_SMP disabled
asm/percpu.h includes asm/paca.h which needs struct tlb_core_data
which is defined in mmu-e500.h
asm/percpu.h is included from asm/mmu.h in a #ifdef CONFIG_E500
before the inclusion of mmu-e500.h
To fix that, move the inclusion of asm/percpu.h into mmu-e500.h
after the definition of struct tlb_core_data
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202308220708.nRf5AUAe-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/
202308220857.uFq2oAxM-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/
202308221055.lw3UzJIL-lkp@intel.com/
Fixes:
3a24ea0df83e ("powerpc/kuap: Use ASM feature fixups instead of static branches")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5e0f97d5cbcd05238b56b4424ab096468296824d.1692684461.git.christophe.leroy@csgroup.eu
Immad Mir [Sun, 28 May 2023 07:46:44 +0000 (13:16 +0530)]
powerpc/powernv: fix debugfs_create_dir() error checking
The debugfs_create_dir returns ERR_PTR incase of an error and the
correct way of checking it by using the IS_ERR inline function, and
not the simple null comparision. This patch fixes this.
Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Immad Mir <mirimmad17@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/CY5PR12MB64553EE96EBB3927311DB598C6459@CY5PR12MB6455.namprd12.prod.outlook.com
Naveen N Rao [Mon, 19 Jun 2023 09:47:34 +0000 (15:17 +0530)]
powerpc/ftrace: Add support for -fpatchable-function-entry
GCC v13.1 updated support for -fpatchable-function-entry on ppc64le to
emit nops after the local entry point, rather than before it. This
allows us to use this in the kernel for ftrace purposes. A new script is
added under arch/powerpc/tools/ to help detect if nops are emitted after
the function local entry point, or before the global entry point.
With -fpatchable-function-entry, we no longer have the profiling
instructions generated at function entry, so we only need to validate
the presence of two nops at the ftrace location in ftrace_init_nop(). We
patch the preceding instruction with 'mflr r0' to match the
-mprofile-kernel ABI for subsequent ftrace use.
This changes the profiling instructions used on ppc32. The default -pg
option emits an additional 'stw' instruction after 'mflr r0' and before
the branch to _mcount 'bl _mcount'. This is very similar to the original
-mprofile-kernel implementation on ppc64le, where an additional 'std'
instruction was used to save LR to its save location in the caller's
stackframe. Subsequently, this additional store was removed in later
compiler versions for performance reasons. The same reasons apply for
ppc32 so we only patch in a 'mflr r0'.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/68586d22981a2c3bb45f27a2b621173d10a7d092.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:33 +0000 (15:17 +0530)]
powerpc/ftrace: Implement ftrace_replace_code()
Implement ftrace_replace_code() to consolidate logic from the different
ftrace patching routines: ftrace_make_nop(), ftrace_make_call() and
ftrace_modify_call(). Note that ftrace_make_call() is still required
primarily to handle patching modules during their load time. The other
two routines should no longer be called.
This lays the groundwork to enable better control in patching ftrace
locations, including the ability to nop-out preceding profiling
instructions when ftrace is disabled.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c28f852225646b0561bbf3c1d22d03f041ace8e0.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:32 +0000 (15:17 +0530)]
powerpc/ftrace: Replace use of ftrace_call_replace() with ftrace_create_branch_inst()
ftrace_create_branch_inst() is clearer about its intent than
ftrace_call_replace().
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/953513b88fa922ba7a66d772dc1310710efe9177.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:31 +0000 (15:17 +0530)]
powerpc/ftrace: Simplify ftrace_modify_call()
Now that we validate the ftrace location during initialization in
ftrace_init_nop(), we can simplify ftrace_modify_call() to patch-in the
updated branch instruction without worrying about the instructions
surrounding the ftrace location. Note that we continue to ensure we
have the expected branch instruction at the ftrace location before
patching it with the updated branch destination.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/06275720939f8ee4c2f61c9e9a3e89b1fa3c441d.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:30 +0000 (15:17 +0530)]
powerpc/ftrace: Simplify ftrace_make_call()
Now that we validate the ftrace location during initialization in
ftrace_init_nop(), we can simplify ftrace_make_call() to replace the nop
without worrying about the instructions surrounding the ftrace location.
Note that we continue to ensure that we have a nop at the ftrace
location before patching it.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2d28866d2f556488a663981abe5621511efb207b.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:29 +0000 (15:17 +0530)]
powerpc/ftrace: Simplify ftrace_make_nop()
Now that we validate the ftrace location during initialization in
ftrace_init_nop(), we can simplify ftrace_make_nop() to patch-in the nop
without worrying about the instructions surrounding the ftrace location.
Note that we continue to ensure that we have a bl to
ftrace_[regs_]caller at the ftrace location before nop-ing it out.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/e12ccbf28c50c3a07fb614f4d392e55f7098a729.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:28 +0000 (15:17 +0530)]
powerpc/ftrace: Add separate ftrace_init_nop() with additional validation
Currently, we validate instructions around the ftrace location every
time we have to enable/disable ftrace. Introduce ftrace_init_nop() to
instead perform all the validation during ftrace initialization. This
allows us to simply patch the necessary instructions during
enabling/disabling ftrace.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f373684081e8e98be09b7f44d2d93069768324dc.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:27 +0000 (15:17 +0530)]
powerpc/ftrace: Stop re-purposing linker generated long branches for ftrace
Commit
67361cf8071286 ("powerpc/ftrace: Handle large kernel configs")
added ftrace support for ppc64 kernel images with a text section larger
than 32MB. The patch did two things:
1. Add stubs at the end of .text to branch into ftrace_[regs_]caller for
functions that were out of branch range.
2. Re-purpose linker-generated long branches to _mcount to instead branch
to ftrace_[regs_]caller.
Before that, we only supported kernel .text up to ~32MB. With the above,
we now support up to ~96MB:
- The first 32MB of kernel text can branch directly into
ftrace_[regs_]caller since that symbol is usually at the beginning.
- The modified long_branch from (2) above is used by the next 32MB of
kernel text.
- The next 32MB of kernel text can use the stub at the end of text to
branch back to ftrace_[regs_]caller.
While re-purposing the long branch works in practice, it still restricts
ftrace to kernel text up to ~96MB. The stub at the end of kernel text
from (1) already enables us to extend ftrace support for kernel text
up to 64MB, which fulfils the original requirement. Further, once we
switch to -fpatchable-function-entry, there will not be a long branch
that we can use.
Stop re-purposing the linker-generated long branches for ftrace to
simplify the code. If there are good reasons to support ftrace on
kernels beyond 64MB, we can consider adding support by using
-fpatchable-function-entry.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/33fa3be97f8e1f2171254ef2e1b0d5c8836c11fd.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:26 +0000 (15:17 +0530)]
powerpc/ftrace: Refactor ftrace_modify_code()
Split up ftrace_modify_code() into a few helpers for future use. Also
update error messages accordingly.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/a8daa49712b44ff539e6c22a2ea649a540386798.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:25 +0000 (15:17 +0530)]
powerpc/ftrace: Consolidate ftrace support into fewer files
ftrace_low.S has just the _mcount stub and return_to_handler(). Merge
this back into ftrace_mprofile.S and ftrace_64_pg.S to keep all ftrace
code together, and to allow those to evolve independently.
ftrace_mprofile.S is also not an entirely accurate name since this also
holds ppc32 code. This will be all the more incorrect once support for
-fpatchable-function-entry is added. Rename files here to more
accurately describe the code:
- ftrace_mprofile.S is renamed to ftrace_entry.S
- ftrace_pg.c is renamed to ftrace_64_pg.c
- ftrace_64_pg.S is rename to ftrace_64_pg_entry.S
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b900c9a8bba9d6c3c295e0f99886acf3e5bf6f7b.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:24 +0000 (15:17 +0530)]
powerpc/ftrace: Extend ftrace support for large kernels to ppc32
Commit
67361cf8071286 ("powerpc/ftrace: Handle large kernel configs")
added ftrace support for ppc64 kernel images with a text section larger
than 32MB. The approach itself isn't specific to ppc64, so extend the
same to also work on ppc32.
While at it, reduce the space reserved for the stub from 64 bytes to 32
bytes since the different stub variants are all less than 8
instructions.
To reduce use of #ifdef, a stub implementation is provided for
kernel_toc_address() and -SZ_2G is cast to 'long long' to prevent
errors on ppc32.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/9fa3258cbb9105cf8a0a8135214d44ffbc75fe84.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:23 +0000 (15:17 +0530)]
powerpc/ftrace: Use FTRACE_REGS_ADDR to identify the correct ftrace trampoline
Instead of keying off DYNAMIC_FTRACE_WITH_REGS, use FTRACE_REGS_ADDR to
identify the proper ftrace trampoline address to use.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6045a280a57a7ea937a5bb13ccac747026dbfb07.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:22 +0000 (15:17 +0530)]
powerpc/ftrace: Simplify function_graph support in ftrace.c
Since we now support DYNAMIC_FTRACE_WITH_ARGS across ppc32 and ppc64
ELFv2, we can simplify function_graph tracer support code in ftrace.c
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/4dc92c4b1ed444dc62b748ae7327acdb9e096864.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:21 +0000 (15:17 +0530)]
powerpc64/ftrace: Move ELFv1 and -pg support code into a separate file
ELFv1 support is deprecated and on the way out. Pre -mprofile-kernel
ftrace support (-pg only) is very limited and is retained primarily for
clang builds. It won't be necessary once clang lands support for
-fpatchable-function-entry.
Copy the existing ftrace code supporting these into ftrace_pg.c.
ftrace.c can then be refactored and enhanced with a focus on ppc32 and
ppc64 ELFv2.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1eb6cc6c3141ddb77a2a25f8a9e83d83ff312b02.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:20 +0000 (15:17 +0530)]
powerpc/module: Remove unused .ftrace.tramp section
.ftrace.tramp section is not used for any purpose. This code was added
all the way back in the original commit introducing support for dynamic
ftrace on ppc64 modules. Remove it.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/9cf6d7f37ba82f7cb6dafecf660f44925c526d8d.1687166935.git.naveen@kernel.org
Naveen N Rao [Mon, 19 Jun 2023 09:47:19 +0000 (15:17 +0530)]
powerpc/ftrace: Fix dropping weak symbols with older toolchains
The minimum level of gcc supported for building the kernel is v5.1.
v5.x releases of gcc emitted a three instruction sequence for
-mprofile-kernel:
mflr r0
std r0, 16(r1)
bl _mcount
It is only with the v6.x releases that gcc started emitting the two
instruction sequence for -mprofile-kernel, omitting the second store
instruction.
With the older three instruction sequence, the actual ftrace location
can be the 5th instruction into a function. Update the allowed offset
for ftrace location from 12 to 16 to accommodate the same.
Cc: stable@vger.kernel.org
Fixes:
7af82ff90a2b06 ("powerpc/ftrace: Ignore weak functions")
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7b265908a9461e38fc756ef9b569703860a80621.1687166935.git.naveen@kernel.org
Christophe Leroy [Fri, 18 Aug 2023 08:59:44 +0000 (10:59 +0200)]
powerpc/perf: Convert fsl_emb notifier to state machine callbacks
CC arch/powerpc/perf/core-fsl-emb.o
arch/powerpc/perf/core-fsl-emb.c:675:6: error: no previous prototype for 'hw_perf_event_setup' [-Werror=missing-prototypes]
675 | void hw_perf_event_setup(int cpu)
| ^~~~~~~~~~~~~~~~~~~
Looks like fsl_emb was completely missed by commit
3f6da3905398 ("perf:
Rework and fix the arch CPU-hotplug hooks")
So, apply same changes as commit
3f6da3905398 ("perf: Rework and fix
the arch CPU-hotplug hooks") then commit
57ecde42cc74 ("powerpc/perf:
Convert book3s notifier to state machine callbacks")
While at it, also fix following error:
arch/powerpc/perf/core-fsl-emb.c: In function 'perf_event_interrupt':
arch/powerpc/perf/core-fsl-emb.c:648:13: error: variable 'found' set but not used [-Werror=unused-but-set-variable]
648 | int found = 0;
| ^~~~~
Fixes:
3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/603e1facb32608f88f40b7d7b9094adc50e7b2dc.1692349125.git.christophe.leroy@csgroup.eu
Mahesh Salgaonkar [Fri, 18 Aug 2023 11:29:43 +0000 (16:59 +0530)]
PCI: rpaphp: Error out on busy status from get-sensor-state
When certain PHB HW failure causes pHyp to recover PHB, it marks the PE
state as temporarily unavailable until recovery is complete. This also
triggers an EEH handler in Linux which needs to notify drivers, and perform
recovery. But before notifying the driver about the PCI error it uses
get_adapter_status()->rpaphp_get_sensor_state()->rtas_call(get-sensor-state)
operation of the hotplug_slot to determine if the slot contains a device or
not. If the slot is empty, the recovery is skipped entirely.
eeh_event_handler()
->eeh_handle_normal_event()
->eeh_slot_presence_check()
->get_adapter_status()
->rpaphp_get_sensor_state()
->rtas_get_sensor()
->rtas_call(get-sensor-state)
However on certain PHB failures, the RTAS call rtas_call(get-sensor-state)
returns extended busy error (9902) until PHB is recovered by pHyp. Once PHB
is recovered, the rtas_call(get-sensor-state) returns success with correct
presence status. The RTAS call interface rtas_get_sensor() loops over the
RTAS call on extended delay return code (9902) until the return value is
either success (0) or error (-1). This causes the EEH handler to get stuck
for ~6 seconds before it could notify that the PCI error has been detected
and stop any active operations. Hence with running I/O traffic, during this
6 seconds, the network driver continues its operation and hits a timeout
(netdev watchdog).
------------
[52732.244731] DEBUG: ibm_read_slot_reset_state2()
[52732.244762] DEBUG: ret = 0, rets[0]=5, rets[1]=1, rets[2]=4000, rets[3]=>
[52732.244798] DEBUG: in eeh_slot_presence_check
[52732.244804] DEBUG: error state check
[52732.244807] DEBUG: Is slot hotpluggable
[52732.244810] DEBUG: hotpluggable ops ?
[52732.244953] DEBUG: Calling ops->get_adapter_status
[52732.244958] DEBUG: calling rpaphp_get_sensor_state
[52736.564262] ------------[ cut here ]------------
[52736.564299] NETDEV WATCHDOG: enP64p1s0f3 (tg3): transmit queue 0 timed o>
[52736.564324] WARNING: CPU: 1442 PID: 0 at net/sched/sch_generic.c:478 dev>
[...]
[52736.564505] NIP [
c000000000c32368] dev_watchdog+0x438/0x440
[52736.564513] LR [
c000000000c32364] dev_watchdog+0x434/0x440
------------
On timeouts, network driver starts dumping debug information to console
(e.g bnx2 driver calls bnx2x_panic_dump()), and go into recovery path while
pHyp is still recovering the PHB. As part of recovery, the driver tries to
reset the device and it keeps failing since every PCI read/write returns
ff's. And when EEH recovery kicks-in, the driver is unable to recover the
device. This impacts the ssh connection and leads to the system being
inaccessible. To get the NIC working again it needs a reboot or re-assign
the I/O adapter from HMC.
[ 9531.168587] EEH: Beginning: 'slot_reset'
[ 9531.168601] PCI 0013:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
[...]
[ 9614.110094] bnx2x: [bnx2x_func_stop:9129(enP19p1s0f0)]FUNC_STOP ramrod failed. Running a dry transaction
[ 9614.110300] bnx2x: [bnx2x_igu_int_disable:902(enP19p1s0f0)]BUG! Proper val not read from IGU!
[ 9629.178067] bnx2x: [bnx2x_fw_command:3055(enP19p1s0f0)]FW failed to respond!
[ 9629.178085] bnx2x 0013:01:00.0 enP19p1s0f0: bc 7.10.4
[ 9629.178091] bnx2x: [bnx2x_fw_dump_lvl:789(enP19p1s0f0)]Cannot dump MCP info while in PCI error
[ 9644.241813] bnx2x: [bnx2x_io_slot_reset:14245(enP19p1s0f0)]IO slot reset --> driver unload
[...]
[ 9644.241819] PCI 0013:01:00.0#10000: EEH: bnx2x driver reports: 'disconnect'
[ 9644.241823] PCI 0013:01:00.1#10000: EEH: Invoking bnx2x->slot_reset()
[ 9644.241827] bnx2x: [bnx2x_io_slot_reset:14229(enP19p1s0f1)]IO slot reset initializing...
[ 9644.241916] bnx2x 0013:01:00.1: enabling device (0140 -> 0142)
[ 9644.258604] bnx2x: [bnx2x_io_slot_reset:14245(enP19p1s0f1)]IO slot reset --> driver unload
[ 9644.258612] PCI 0013:01:00.1#10000: EEH: bnx2x driver reports: 'disconnect'
[ 9644.258615] EEH: Finished:'slot_reset' with aggregate recovery state:'disconnect'
[ 9644.258620] EEH: Unable to recover from failure from PHB#13-PE#10000.
[ 9644.261811] EEH: Beginning: 'error_detected(permanent failure)'
[...]
[ 9644.261823] EEH: Finished:'error_detected(permanent failure)'
Hence, it becomes important to inform driver about the PCI error detection
as early as possible, so that driver is aware of PCI error and waits for
EEH handler's next action for successful recovery.
Current implementation uses rtas_get_sensor() API which blocks the slot
check state until RTAS call returns success. To avoid this, fix the PCI
hotplug driver (rpaphp) to return an error (-EBUSY) if the slot presence
state can not be detected immediately while PE is in EEH recovery state.
Change rpaphp_get_sensor_state() to invoke rtas_call(get-sensor-state)
directly only if the respective PE is in EEH recovery state, and take
actions based on RTAS return status. This way EEH handler will not be
blocked on rpaphp_get_sensor_state() and can immediately notify driver
about the PCI error and stop any active operations.
In normal cases (non-EEH case) rpaphp_get_sensor_state() will continue to
invoke rtas_get_sensor() as it was earlier with no change in existing
behavior.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/169235815601.193557.13989873835811325343.stgit@jupiter
Mahesh Salgaonkar [Fri, 18 Aug 2023 11:29:07 +0000 (16:59 +0530)]
powerpc/rtas: export rtas_error_rc() for reuse.
Also, #define descriptive names for common rtas return codes and use it
instead of numeric values.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/169235811556.193557.1023625262204809514.stgit@jupiter
Vaibhav Jain [Fri, 18 Aug 2023 05:07:37 +0000 (10:37 +0530)]
powerpc/idle: Add support for nohlt
This patch enables config option GENERIC_IDLE_POLL_SETUP for arch
powerpc. This adds support for kernel param 'nohlt'.
Powerpc kernel also supports another kernel boot-time param called
'powersave' which can also be used to disable all cpu idle-states and
forces CPU to an idle-loop similar to what cpu_idle_poll() does. This
patch however makes powerpc kernel-parameters better aligned to the
generic boot-time parameters.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230818050739.827851-1-vaibhav@linux.ibm.com
Hari Bathini [Fri, 9 Jun 2023 07:14:04 +0000 (12:44 +0530)]
powerpc/fadump: invoke ibm,os-term with rtas_call_unlocked()
Invoke ibm,os-term call with rtas_call_unlocked(), without using the
RTAS spinlock, to avoid deadlock in the unlikely event of a machine
crash while making an RTAS call.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230609071404.425529-1-hbathini@linux.ibm.com
Nathan Lynch [Thu, 17 Aug 2023 16:21:53 +0000 (11:21 -0500)]
selftests/powerpc: add const qualification where possible
Various char * parameters in the common powerpc selftest APIs can be
const.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817-powerpc-selftest-misc-v1-2-a84cc1ef78b2@linux.ibm.com
Nathan Lynch [Thu, 17 Aug 2023 16:21:52 +0000 (11:21 -0500)]
powerpc/selftests: sort mm/.gitignore, add exec_prot
Add exec_prot to to mm/.gitignore and sort the result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817-powerpc-selftest-misc-v1-1-a84cc1ef78b2@linux.ibm.com
Michal Suchanek [Thu, 17 Aug 2023 16:24:08 +0000 (18:24 +0200)]
powerpc: Move DMA64_PROPNAME define to a header
Avoid redefining the same value in multiple source.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817162411.429-1-msuchanek@suse.de
Nick Desaulniers [Thu, 17 Aug 2023 18:11:56 +0000 (11:11 -0700)]
Revert "powerpc/xmon: Relax frame size for clang"
This reverts commit
9c87156cce5a63735d1218f0096a65c50a7a32aa.
I have not been able to reproduce the reported -Wframe-larger-than=
warning (or disassembly) with clang-11 or clang-18.
I don't know precisely when this was fixed in llvm, but it may be time
to revert this.
Closes: https://github.com/ClangBuiltLinux/linux/issues/252
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817-ppc_xmon-v1-1-8cc2d51b9995@google.com
Aneesh Kumar K.V [Tue, 1 Aug 2023 04:44:46 +0000 (10:14 +0530)]
powerpc/mm: Cleanup memory block size probing
Parse the device tree in early init to find the memory block size to be
used by the kernel. Consolidate the memory block size device tree parsing
to one helper and use that on both powernv and pseries. We still want to
use machine-specific callback because on all machine types other than
powernv and pseries we continue to return MIN_MEMORY_BLOCK_SIZE.
pseries_memory_block_size used to look for the second memory
block (memory@x) to determine the memory_block_size value. This patch
changed that to look at all memory blocks and make sure we can map them all
correctly using the computed memory block size value.
Add workaround to force 256MB memory block size if device driver managed
memory such as GPU memory is present. This helps to add GPU memory
that is not aligned to 1G.
Co-developed-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801044447.11275-1-aneesh.kumar@linux.ibm.com
Trevor Woerner [Thu, 17 Aug 2023 11:50:14 +0000 (07:50 -0400)]
powerpc/configs: Drop CONFIG_IP_NF_TARGET_CLUSTERIP
Drop CONFIG_IP_NF_TARGET_CLUSTERIP as it was removed in commit
9db5d918e2c0
("netfilter: ip_tables: remove clusterip target").
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817115017.35663-5-twoerner@gmail.com
Sourabh Jain [Tue, 4 Jul 2023 05:07:15 +0000 (10:37 +0530)]
powerpc/fadump: reset dump area size if fadump memory reserve fails
In case fadump_reserve_mem() fails to reserve memory, the
reserve_dump_area_size variable will retain the reserve area size. This
will lead to /sys/kernel/fadump/mem_reserved node displaying an incorrect
memory reserved by fadump.
To fix this problem, reserve dump area size variable is set to 0 if fadump
failed to reserve memory.
Fixes:
8255da95e545 ("powerpc/fadump: release all the memory above boot memory size")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230704050715.203581-1-sourabhjain@linux.ibm.com
Christophe Leroy [Thu, 17 Aug 2023 14:27:23 +0000 (16:27 +0200)]
powerpc/4xx: Add missing includes to fix no previous prototype errors
A W=1 build of ppc40x_defconfig throws the followings errors:
CC arch/powerpc/platforms/4xx/uic.o
arch/powerpc/platforms/4xx/uic.c:274:13: warning: no previous prototype for 'uic_init_tree' [-Wmissing-prototypes]
274 | void __init uic_init_tree(void)
| ^~~~~~~~~~~~~
arch/powerpc/platforms/4xx/uic.c:319:14: warning: no previous prototype for 'uic_get_irq' [-Wmissing-prototypes]
319 | unsigned int uic_get_irq(void)
| ^~~~~~~~~~~
CC arch/powerpc/platforms/4xx/machine_check.o
CC arch/powerpc/platforms/4xx/soc.o
arch/powerpc/platforms/4xx/soc.c:193:6: warning: no previous prototype for 'ppc4xx_reset_system' [-Wmissing-prototypes]
193 | void ppc4xx_reset_system(char *cmd)
| ^~~~~~~~~~~~~~~~~~~
Add missing includes to get the missing prototypes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c8253017e355638132737ff47936e290df8738d1.1692282432.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 17 Aug 2023 14:25:49 +0000 (16:25 +0200)]
powerpc/47x: Add prototype for mmu_init_secondary()
A W=1 build of 44x/iss476-smp_defconfig gives:
arch/powerpc/mm/nohash/44x.c:220:13: error: no previous prototype for 'mmu_init_secondary' [-Werror=missing-prototypes]
220 | void __init mmu_init_secondary(int cpu)
| ^~~~~~~~~~~~~~~~~~
That function is called from head_4xx.S
Add a prototype in mmu_decl.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/e89d9927c926044e54fd056a849785f526c6414f.1692282340.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 17 Aug 2023 14:26:44 +0000 (16:26 +0200)]
powerpc/47x: Remove early_init_mmu_47x() to fix no previous prototype
4xx/iss476-smp_defconfig leads to:
CC arch/powerpc/mm/nohash/tlb.o
arch/powerpc/mm/nohash/tlb.c:322:13: error: no previous prototype for 'early_init_mmu_47x' [-Werror=missing-prototypes]
322 | void __init early_init_mmu_47x(void)
| ^~~~~~~~~~~~~~~~~~
early_init_mmu_47x() is used only at one place and only locally.
Fold it into its only caller and remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0a667b7c2e05d3cf41ecd38f33cc334083a61c8d.1692282396.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 17 Aug 2023 13:44:26 +0000 (15:44 +0200)]
powerpc/4xx: Remove pika_dtm_[un]register_shutdown() to fix no previous prototype
ppc4xx_defconfig with W=1 results in:
CC arch/powerpc/platforms/44x/warp.o
arch/powerpc/platforms/44x/warp.c:369:5: error: no previous prototype for 'pika_dtm_register_shutdown' [-Werror=missing-prototypes]
369 | int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/44x/warp.c:374:5: error: no previous prototype for 'pika_dtm_unregister_shutdown' [-Werror=missing-prototypes]
374 | int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
The functions were added by commit
4ebef31fa6e0 ("[POWERPC] PIKA Warp:
Update platform code to support Rev B boards")
Those functions are not used localy and allthough their symbols are
exported they are not declared in any header file so they can't be used.
Remove them, then remove the associated list as it will now remain empty
hence becomes useless.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/830923f0e0375a14609204246d302c7476a8f948.1692279855.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 17 Aug 2023 12:40:49 +0000 (14:40 +0200)]
powerpc/4xx: Remove WatchdogHandler() to fix no previous prototype error
Building ppc40x_defconfig throws the following error:
CC arch/powerpc/kernel/traps.o
arch/powerpc/kernel/traps.c:2232:29: warning: no previous prototype for 'WatchdogHandler' [-Wmissing-prototypes]
2232 | void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~
This function was imported by commit
14cf11af6cf6 ("powerpc: Merge
enough to start building in arch/powerpc.") as a weak function but
never defined and/or called outside traps.c
As it has only one caller fold it inside its caller and remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/38fe1078eb403eef74dc8f29387636fd7ecdf43c.1692276041.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 15 Aug 2023 17:42:40 +0000 (19:42 +0200)]
powerpc/32s: Cleanup the mess in __set_pte_at()
__set_pte_at() handles 3 main cases with #ifdefs plus the 'percpu'
subcase which leads to code duplication.
Rewrite the function using IS_ENABLED() to minimise the total number
of cases and remove duplicated code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2322dd08217bccab25456fe8b189edf0e6a8b6dd.1692121353.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 17 Aug 2023 12:26:45 +0000 (14:26 +0200)]
powerpc/8xx: Remove init_internal_rtc() to fix no previous prototype error
A W=1 build of mpc885_ads_defconfig throws the following error:
CC arch/powerpc/platforms/8xx/m8xx_setup.o
arch/powerpc/platforms/8xx/m8xx_setup.c:41:1: error: no previous prototype for 'init_internal_rtc' [-Werror=missing-prototypes]
41 | init_internal_rtc(void)
| ^~~~~~~~~~~~~~~~~
init_internal_rtc() was introduced by commit
df34403dcaac ("[POWERPC]
8xx: Add mpc885ads support and common mpc8xx files") as a weak
function but has never been defined and/or used outside m8xx_setup.c
As it is called only once there, just fold it into its caller and
remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0aa1141e18a84d926e199093204b37ec993f0c87.1692275185.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 17 Aug 2023 08:05:49 +0000 (10:05 +0200)]
powerpc/82xx: Remove CONFIG_8260 and CONFIG_8272
CONFIG_8272 is never used, remove it.
CONFIG_8260 is redundant with CONFIG_PPC_82xx, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/80930252a5167f3cdaa7eb694074d75521a0bdf9.1692259495.git.christophe.leroy@csgroup.eu
Christophe Leroy [Thu, 17 Aug 2023 08:05:08 +0000 (10:05 +0200)]
powerpc/82xx: Remove pq2_init_pci
Commit
859b21a008eb ("powerpc: drop PowerQUICC II Family ADS platform
support") removed last user of pq2_init_pci.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8b2db7c3c2c346aa8aa49507415c360d441e5bf5.1692259498.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 16 Aug 2023 15:22:17 +0000 (17:22 +0200)]
powerpc/83xx: Split usb.c
usb.c contains three independent parts with no common part.
Split it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop usb.o from Makefile to fix build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/75712b54bf9cb85ab10e47cd2772cd2a098ca895.1692199324.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 16 Aug 2023 15:22:16 +0000 (17:22 +0200)]
powerpc/83xx: Fix style problems in usb.c and remove unneccessary includes from mpc83xx.h
Replace printk(KERN_WARN with pr_warn(
Remove a couple of blank lines
Re-align multi-line code.
Replace asm/io.h by linux/io.h
mpc83xx.h doesn't need linux/device.h or asm/pci-bridge.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2cb498f637e082a4af8032311fad3cae84d6aa5d.1692199324.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 16 Aug 2023 15:19:54 +0000 (17:19 +0200)]
powerpc/fsl_pci: Make fsl_add_bridge() static
Since commit
905e75c46dba ("powerpc/fsl-pci: Unify pci/pcie initialization code")
fsl_add_bridge() is not used anymore outside of fsl_pci.c
Make it static.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2115e3597d81e72a865820af54f0e290d0fd2b3a.1692199186.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 18 Aug 2023 06:51:48 +0000 (08:51 +0200)]
powerpc/512x: Make mpc512x_select_reset_compat() static
mpc512x_select_reset_compat() is only used in the file it
is defined.
Make it static.
Move mpc512x_restart_init() after mpc512x_select_reset_compat().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/36a19e13025dbf17e92e832dd24150642b0e9bad.1692341499.git.christophe.leroy@csgroup.eu
Justin Stitt [Wed, 16 Aug 2023 21:39:24 +0000 (21:39 +0000)]
powerpc/ps3: refactor strncpy usage
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
`make_first_field()` should use similar implementation to `make_field()`
due to memcpy having more obvious behavior here. The end result yields
the same behavior as the previous `strncpy`-based implementation
including the NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230816-strncpy-arch-powerpc-platforms-ps3-repository-v1-1-88283b02fb09@google.com
Christophe Leroy [Thu, 22 Jun 2023 10:01:23 +0000 (12:01 +0200)]
powerpc/ptrace: Split gpr32_set_common
objtool reports the following warning:
arch/powerpc/kernel/ptrace/ptrace-view.o: warning: objtool:
gpr32_set_common+0x23c (.text+0x860): redundant UACCESS disable
gpr32_set_common() conditionally opens and closes UACCESS based on
whether kbuf pointer is NULL or not. This is wackelig.
Split gpr32_set_common() in two fonctions, one for user one for
kernel.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix oops in gpr32_set_common_user() due to NULL kbuf]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b8d6ae4483fcfd17524e79d803c969694a85cc02.1687428075.git.christophe.leroy@csgroup.eu
Benjamin Gray [Tue, 25 Jul 2023 00:58:38 +0000 (10:58 +1000)]
Documentation/powerpc: Fix ptrace request names
The documented ptrace request names are currently wrong/incomplete.
Fix this to improve correctness and searchability.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725005841.28854-2-bgray@linux.ibm.com
Benjamin Gray [Tue, 1 Aug 2023 01:17:44 +0000 (11:17 +1000)]
perf/hw_breakpoint: Remove arch breakpoint hooks
PowerPC was the only user of these hooks, and has been refactored to no
longer require them. There is no need to keep them around, so remove
them to reduce complexity.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-8-bgray@linux.ibm.com
Benjamin Gray [Tue, 1 Aug 2023 01:17:43 +0000 (11:17 +1000)]
selftests/powerpc/ptrace: Update ptrace-perf watchpoint selftest
Now that ptrace and perf are no longer exclusive, update the
test to exercise interesting interactions.
An assembly file is used for the children to allow precise instruction
choice and addresses, while avoiding any compiler quirks.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-7-bgray@linux.ibm.com
Benjamin Gray [Tue, 1 Aug 2023 01:17:42 +0000 (11:17 +1000)]
powerpc/watchpoints: Remove ptrace/perf exclusion tracking
ptrace and perf watchpoints were considered incompatible in
commit
29da4f91c0c1 ("powerpc/watchpoint: Don't allow concurrent perf
and ptrace events"), but the logic in that commit doesn't really apply.
Ptrace doesn't automatically single step; the ptracer must request this
explicitly. And the ptracer can do so regardless of whether a
ptrace/perf watchpoint triggered or not: it could single step every
instruction if it wanted to. Whatever stopped the ptracee before
executing the instruction that would trigger the perf watchpoint is no
longer relevant by this point.
To get correct behaviour when perf and ptrace are watching the same
data we must ignore the perf watchpoint. After all, ptrace has
before-execute semantics, and perf is after-execute, so perf doesn't
actually care about the watchpoint trigger at this point in time.
Pausing before execution does not mean we will actually end up executing
the instruction.
Importantly though, we don't remove the perf watchpoint yet. This is
key.
The ptracer is free to do whatever it likes right now. E.g., it can
continue the process, single step. or even set the child PC somewhere
completely different.
If it does try to execute the instruction though, without reinserting
the watchpoint (in which case we go back to the start of this example),
the perf watchpoint would immediately trigger. This time there is no
ptrace watchpoint, so we can safely perform a single step and increment
the perf counter. Upon receiving the single step exception, the existing
code already handles propagating or consuming it based on whether
another subsystem (e.g. ptrace) requested a single step. Again, this is
needed with or without perf/ptrace exclusion, because ptrace could be
single stepping this instruction regardless of if a watchpoint is
involved.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-6-bgray@linux.ibm.com
Benjamin Gray [Tue, 1 Aug 2023 01:17:41 +0000 (11:17 +1000)]
powerpc/watchpoints: Simplify watchpoint reinsertion
We only remove watchpoints when they have the perf_single_step flag set,
so we can reinsert them during the first iteration.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-5-bgray@linux.ibm.com
Benjamin Gray [Tue, 1 Aug 2023 01:17:40 +0000 (11:17 +1000)]
powerpc/watchpoints: Track perf single step directly on the breakpoint
There is a bug in the current watchpoint tracking logic, where the
teardown in arch_unregister_hw_breakpoint() uses bp->ctx->task, which it
does not have a reference of and parallel threads may be in the process
of destroying. This was partially addressed in commit
fb822e6076d9
("powerpc/hw_breakpoint: Fix oops when destroying hw_breakpoint event"),
but the underlying issue of accessing a struct member in an unknown
state still remained. Syzkaller managed to trigger a null pointer
derefernce due to the race between the task destructor and checking the
pointer and dereferencing it in the loop.
While this null pointer dereference could be fixed by using READ_ONCE
to access the task up front, that just changes the error to manipulating
possbily freed memory.
Instead, the breakpoint logic needs to be reworked to remove any
dependency on a context or task struct during breakpoint removal.
The reason we have this currently is to clear thread.last_hit_ubp. This
member is used to differentiate the perf DAWR single-step sequence from
other causes of single-step, such as userspace just calling
ptrace(PTRACE_SINGLESTEP, ...). We need to differentiate them because,
when the single step interrupt is received, we need to know whether to
re-insert the DAWR breakpoint (perf) or not (ptrace / other).
arch_unregister_hw_breakpoint() needs to clear this information to
prevent dangling pointers to possibly freed memory. These pointers are
dereferenced in single_step_dabr_instruction() without a way to check
their validity.
This patch moves the tracking of this information to the breakpoint
itself. This means we no longer have to do anything special to clean up.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-4-bgray@linux.ibm.com
Benjamin Gray [Tue, 1 Aug 2023 01:17:39 +0000 (11:17 +1000)]
powerpc/watchpoints: Don't track info persistently
info is cheap to retrieve, and is likely optimised by the compiler
anyway. On the other hand, propagating it across the functions makes it
possible to be inconsistent and adds needless complexity.
Remove it, and invoke counter_arch_bp() when we need to work with it.
As we don't persist it, we just use the local bp array to track whether
we are ignoring a breakpoint.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-3-bgray@linux.ibm.com
Benjamin Gray [Tue, 1 Aug 2023 01:17:38 +0000 (11:17 +1000)]
powerpc/watchpoints: Explain thread_change_pc() more
The behaviour of the thread_change_pc() function is a bit cryptic
without being more familiar with how the watchpoint logic handles
perf's after-execute semantics.
Expand the comment to explain why we can re-insert the breakpoint and
unset the perf_single_step flag.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801011744.153973-2-bgray@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:55 +0000 (13:04 +0530)]
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_partition sysfs interface file
Add details of the new hv-gpci interface file called
"affinity_domain_via_partition" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-11-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:54 +0000 (13:04 +0530)]
powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via partition information
The hcall H_GET_PERF_COUNTER_INFO with counter request value as
AFFINITY_DOMAIN_INFORMATION_BY_PARTITION(0XB1), can be used to get
the system affinity domain via partition information. To expose the system
affinity domain via partition information, patch adds sysfs file called
"affinity_domain_via_partition" to the "/sys/devices/hv_gpci/interface/"
of hv_gpci pmu driver.
Add new entry for AFFINITY_DOMAIN_VIA_PAR in sysinfo_counter_request
array, which points to the counter request value
"affinity_domain_via_partition" in hv-gpci.c file. Also add a
new function called "affinity_domain_via_partition_result_parse" to parse
the hcall result and store it in output buffer.
The affinity_domain_via_partition sysfs file is only available for power10
and above platforms. Add a macro called
INTERFACE_AFFINITY_DOMAIN_VIA_PAR_ATTR, which points to the index of NULL
placeholder, for affinity_domain_via_partition attribute in
interface_attrs array. Also updated the value of INTERFACE_NULL_ATTR
macro in hv-gpci.c file.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-10-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:53 +0000 (13:04 +0530)]
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_domain sysfs interface file
Add details of the new hv-gpci interface file called
"affinity_domain_via_domain" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-9-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:52 +0000 (13:04 +0530)]
powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via domain information
The hcall H_GET_PERF_COUNTER_INFO with counter request value as
AFFINITY_DOMAIN_INFORMATION_BY_DOMAIN(0XB0), can be used to get
the system affinity domain via domain information. To expose the system
affinity domain via domain information, patch adds sysfs file called
"affinity_domain_via_domain" to the "/sys/devices/hv_gpci/interface/"
of hv_gpci pmu driver.
Add new entry for AFFINITY_DOMAIN_VIA_DOM in sysinfo_counter_request
array, which points to the counter request value
"affinity_domain_via_domain" in hv-gpci.c file.
The affinity_domain_via_domain sysfs file is only available for power10
and above platforms. Add a macro called
INTERFACE_AFFINITY_DOMAIN_VIA_DOM_ATTR, which points to the index of NULL
placeholder, for affinity_domain_via_domain attribute in interface_attrs
array. Also updated the value of INTERFACE_NULL_ATTR macro in hv-gpci.c
file.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-8-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:51 +0000 (13:04 +0530)]
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_virtual_processor sysfs interface file
Add details of the new hv-gpci interface file called
"affinity_domain_via_virtual_processor" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-7-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:50 +0000 (13:04 +0530)]
powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via virtual processor information
The hcall H_GET_PERF_COUNTER_INFO with counter request value as
AFFINITY_DOMAIN_INFORMATION_BY_VIRTUAL_PROCESSOR(0XA0), can be used to get
the system affinity domain via virtual processor information. To expose
the system affinity domain via virtual processor information, patch adds
sysfs file called "affinity_domain_via_virtual_processor" to the
"/sys/devices/hv_gpci/interface/" of hv_gpci pmu driver.
The affinity_domain_via_virtual_processor sysfs file is only available for
power10 and above platforms. Add a macro called
INTERFACE_AFFINITY_DOMAIN_VIA_VP_ATTR, which points to the index of NULL
placeholder, for affinity_domain_via_virtual_processor attribute in
interface_attrs array. Also updated the value of INTERFACE_NULL_ATTR macro
in hv-gpci.c file.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-6-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:49 +0000 (13:04 +0530)]
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document processor_config sysfs interface file
Add details of the new hv-gpci interface file called
"processor_config" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-5-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:48 +0000 (13:04 +0530)]
powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show processor config information
The hcall H_GET_PERF_COUNTER_INFO with counter request value as
PROCESSOR_CONFIG(0X90), can be used to get the system
processor configuration information. To expose the system
processor config information, patch adds sysfs file called
"processor_config" to the "/sys/devices/hv_gpci/interface/"
of hv_gpci pmu driver.
Add enum and sysinfo_counter_request array to get required
counter request value in hv-gpci.c file.
Also add a new function called "sysinfo_device_attr_create",
which will create and return required device attribute to the
add_sysinfo_interface_files function.
The processor_config sysfs file is only available for power10
and above platforms. Add a new macro called
INTERFACE_PROCESSOR_CONFIG_ATTR, which points to the index of
NULL placefolder, for processor_config attribute in the interface_attrs
array. Also add macro INTERFACE_NULL_ATTR which points to index of NULL
attribute in interface_attrs array.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-4-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:47 +0000 (13:04 +0530)]
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document processor_bus_topology sysfs interface file
Add details of the new hv-gpci interface file called
"processor_bus_topology" in the ABI documentation.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-3-kjain@linux.ibm.com
Kajol Jain [Sat, 29 Jul 2023 07:34:46 +0000 (13:04 +0530)]
powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show processor bus topology information
The hcall H_GET_PERF_COUNTER_INFO with counter request value as
PROCESSOR_BUS_TOPOLOGY(0XD0), can be used to get the system
topology information. To expose the system topology information,
patch adds sysfs file called "processor_bus_topology" to the
"/sys/devices/hv_gpci/interface/" of hv_gpci pmu driver.
Add macro for PROCESSOR_BUS_TOPOLOGY counter request value
in hv-gpci.c file. Also add a new function called
"systeminfo_gpci_request", to make the H_GET_PERF_COUNTER_INFO hcall
with added macro and populates the output buffer.
The processor_bus_topology sysfs file is only available for power10
and above platforms. Add a new function called
"add_sysinfo_interface_files", which will add processor_bus_topology
attribute in the interface_attrs array, only for power10 and
above platforms.
Also add macro INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR in hv-gpci.c
file, which points to the index of NULL placefolder, for
processor_bus_topology attribute.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230729073455.7918-2-kjain@linux.ibm.com
Linus Walleij [Wed, 9 Aug 2023 08:07:13 +0000 (10:07 +0200)]
powerpc: Make virt_to_pfn() a static inline
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
Move the virt_to_pfn() and related functions below the
declaration of __pa() so it compiles.
For symmetry do the same with pfn_to_kaddr().
As the file is included right into the linker file, we need
to surround the functions with ifndef __ASSEMBLY__ so we
don't cause compilation errors.
The conversion moreover exposes the fact that pmd_page_vaddr()
was returning an unsigned long rather than a const void * as
could be expected, so all the sites defining pmd_page_vaddr()
had to be augmented as well.
Finally the KVM code in book3s_64_mmu_hv.c was passing an
unsigned int to virt_to_phys() so fix that up with a cast so the
result compiles.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[mpe: Fixup kfence.h, simplify pfn_to_kaddr() & pmd_page_vaddr()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230809-virt-to-phys-powerpc-v1-1-12e912a7d439@linaro.org
Xiongfeng Wang [Fri, 4 Aug 2023 08:04:35 +0000 (16:04 +0800)]
powerpc/powernv/pci: use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it mannually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230804080435.191196-1-wangxiongfeng2@huawei.com
Gautam Menghani [Mon, 31 Jul 2023 11:55:39 +0000 (17:25 +0530)]
powerpc/xics: Remove unnecessary endian conversion
Remove an unnecessary piece of code that does an endianness conversion
but does not use the result. The following warning was reported by
Clang's static analyzer:
arch/powerpc/sysdev/xics/ics-opal.c:114:2: warning: Value stored to
'server' is never read [deadcode.DeadStores]
server = be16_to_cpu(oserver);
'server' was used as a parameter to opal_get_xive() in commit
5c7c1e9444d8 ("powerpc/powernv: Add OPAL ICS backend") when it was
introduced. 'server' was also used in an error message for the call to
opal_get_xive().
'server' was always later set by a call to ics_opal_mangle_server()
before being used.
Commit
bf8e0f891a32 ("powerpc/powernv: Fix endian issues in OPAL ICS
backend") used a new variable 'oserver' as the parameter to
opal_get_xive() instead of 'server' for endian correctness. It also
removed 'server' from the error message for the call to opal_get_xive().
Fix the warning by removing the server variable assignment.
Fixes:
bf8e0f891a32 ("powerpc/powernv: Fix endian issues in OPAL ICS backend")
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230731115543.36991-1-gautam@linux.ibm.com
ruanjinjie [Thu, 10 Nov 2022 01:19:29 +0000 (09:19 +0800)]
powerpc/pseries: fix possible memory leak in ibmebus_bus_init()
If device_register() returns error in ibmebus_bus_init(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop
the reference count that was set in device_initialize() when it fails,
so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com
Masahiro Yamada [Sun, 6 Aug 2023 15:09:54 +0000 (00:09 +0900)]
powerpc: remove <asm/export.h>
All *.S files under arch/powerpc/ have been converted to include
<linux/export.h> instead of <asm/export.h>.
Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230806150954.394189-3-masahiroy@kernel.org
Masahiro Yamada [Sun, 6 Aug 2023 15:09:53 +0000 (00:09 +0900)]
powerpc: replace #include <asm/export.h> with #include <linux/export.h>
Commit
ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.
Replace #include <asm/export.h> with #include <linux/export.h>.
After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[mpe: Fixup selftests that stub asm/export.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230806150954.394189-2-masahiroy@kernel.org
Masahiro Yamada [Sun, 6 Aug 2023 15:09:52 +0000 (00:09 +0900)]
powerpc: remove unneeded #include <asm/export.h>
There is no EXPORT_SYMBOL line there, hence #include <asm/export.h>
is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230806150954.394189-1-masahiroy@kernel.org
Nick Desaulniers [Thu, 3 Aug 2023 18:33:52 +0000 (11:33 -0700)]
powerpc/inst: add PPC_TLBILX_LPID
Clang didn't recognize the instruction tlbilxlpid. This was fixed in
clang-18 [0] then backported to clang-17 [1]. To support clang-16 and
older, rather than using that instruction bare in inline asm, add it to
ppc-opcode.h and use that macro as is done elsewhere for other
instructions.
Link: https://github.com/ClangBuiltLinux/linux/issues/1891
Link: https://github.com/llvm/llvm-project/issues/64080
Link: https://github.com/llvm/llvm-project/commit/53648ac1d0c953ae6d008864dd2eddb437a92468
Link: https://github.com/llvm/llvm-project-release-prs/commit/0af7e5e54a8c7ac665773ac1ada328713e8338f5
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/llvm/
202307211945.TSPcyOhh-lkp@intel.com/
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230803-ppc_tlbilxlpid-v3-1-ca84739bfd73@google.com
Xiongfeng Wang [Fri, 4 Aug 2023 07:56:30 +0000 (15:56 +0800)]
cxl: Use pci_find_vsec_capability() to simplify the code
PCI core add pci_find_vsec_capability() to query VSEC. We can use that
core API to simplify the code.
The only logical change is that pci_find_vsec_capability check the
Vendor ID before finding the VSEC.
PCI spec rev 5.0 says in 7.9.5.2 Vendor-Specific Header:
VSEC ID - This field is a vendor-defined ID number that indicates the
nature and format of the VSEC structure
Software must qualify the Vendor ID before interpreting this field.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230804075630.186054-1-wangxiongfeng2@huawei.com
Christophe Leroy [Wed, 21 Jun 2023 10:40:50 +0000 (12:40 +0200)]
powerpc/reg: Remove #ifdef around mtspr macro
That ifdef was introduced by commit
1458dd951f7c ("powerpc/8xx:
Handle CPU6 ERRATA directly in mtspr() macro") and left over by
commit
2a45addd21de ("powerpc/8xx: Remove CPU6 ERRATA Workaround")
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/cf652e47ea9e453e89813611b6f76d0939a12063.1687344017.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 21 Jun 2023 10:38:10 +0000 (12:38 +0200)]
powerpc/step: Mark __copy_mem_out() and __emulate_dcbz() __always_inline
objtool reports two folliwng warnings:
arch/powerpc/lib/sstep.o: warning: objtool: copy_mem_out+0x3c
(.text+0x30c): call to __copy_mem_out() with UACCESS enabled
arch/powerpc/lib/sstep.o: warning: objtool: emulate_dcbz+0x70
(.text+0x4dc): call to __emulate_dcbz() with UACCESS enabled
Mark __copy_mem_out() and __emulate_dcbz() __always_inline
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f1d4a15da70190f8c2fcddb377bbc1e09827242c.1687343857.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 8 Aug 2023 06:04:43 +0000 (08:04 +0200)]
powerpc/cpm2: Remove cpm2_map() and cpm2_unmap()
Since commit
449012daa92a ("[POWERPC] cpm2: Infrastructure code
cleanup.") cpm2_map() is just returning cpm2_immr pointer and
cpm2_unmap() does nothing.
We already have parts of code that use cpm2_immr directly so get rid
of cpm2_map() and cpm2_unmap() by using cpm2_immr directly. And avoid
going through local pointers that hide the pointed structure.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/9fe6ff7284e9f968b12abe7de7c08d7ea40e29d6.1691474658.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 8 Aug 2023 06:04:42 +0000 (08:04 +0200)]
powerpc/8xx: Remove immr_map() and immr_unmap()
Since commit
fb533d0c5a97 ("[POWERPC] 8xx: Infrastructure code cleanup.")
immr_map() is just returning mpc8xxx_immr pointer and immr_unmap()
do nothing.
We already have parts of code that use mpc8xxx_immr directly so get rid
of immr_map() and immr_unmap() by using mpc8xxx_immr directly. And avoid
going through local pointers that hide the pointed structure.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/633ed46f6015ff44d5599258647ea517f75d6a1d.1691474658.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 8 Aug 2023 06:04:41 +0000 (08:04 +0200)]
powerpc: Remove CONFIG_PCI_8260
CONFIG_PCI_8260 is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/19a4c07466ce8b80f287a06eadcc80c4ab1d2c9e.1691474658.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 8 Aug 2023 06:04:40 +0000 (08:04 +0200)]
powerpc/include: Remove mpc8260.h and m82xx_pci.h
SIU_INT_IRQ1 is not used anywhere and __IO_BASE is defined in
asm/io.h
Remove m82xx_pci.h
Then the only thing remaining in mpc8260.h is MPC82XX_BCR_PLDP
Move MPC82XX_BCR_PLDP into asm/cpm2.h then remove mpc8260.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/afe23bf3624c389ff17e9789884c78c124b7b202.1691474658.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 8 Aug 2023 06:04:39 +0000 (08:04 +0200)]
powerpc/include: Declare mpc8xx_immr in 8xx_immap.h
Do the same as for cmp2_immr : declare it at the same place
as its type immap_t, that is in 8xx_immap.h instead of fs_pd.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62d490b65899c2f2667ca7045c5f0fad9cbda458.1691474658.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 8 Aug 2023 06:04:38 +0000 (08:04 +0200)]
powerpc/include: Remove unneeded #include <asm/fs_pd.h>
tqm8xx_setup.c and fs_enet.h don't use any items provided by fs_pd.h
Remove unneeded #include <asm/fs_pd.h>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b056c4e986a4a7707fc1994304c34f7bd15d6871.1691474658.git.christophe.leroy@csgroup.eu
Zheng Zengkai [Fri, 11 Aug 2023 10:20:39 +0000 (18:20 +0800)]
ocxl: Use pci_dev_id() to simplify the code
PCI core API pci_dev_id() can be used to get the BDF number for a pci
device. We don't need to compose it mannually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230811102039.17257-1-zhengzengkai@huawei.com
Arnd Bergmann [Thu, 10 Aug 2023 14:19:24 +0000 (16:19 +0200)]
macintosh/ams: mark ams_init() static
This is the module init function, which by definition is used only
locally, so mark it static to avoid a warning:
drivers/macintosh/ams/ams-core.c:179:12: error: no previous prototype for 'ams_init' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810141947.1236730-7-arnd@kernel.org
Randy Dunlap [Thu, 10 Aug 2023 00:07:40 +0000 (17:07 -0700)]
powerpc/pseries: PLPKS: undo kernel-doc comment notation
Don't use kernel-doc "/**" comment format for non-kernel-doc comments.
This prevents a kernel-doc warning:
arch/powerpc/platforms/pseries/plpks.c:186: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Label is combination of label attributes + name.
Fixes:
2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/
202308040430.GxmPAnwZ-lkp@intel.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810000740.23756-1-rdunlap@infradead.org
Christophe Leroy [Wed, 9 Aug 2023 08:01:43 +0000 (10:01 +0200)]
powerpc/radix: Move some functions into #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
With skiboot_defconfig, Clang reports:
CC arch/powerpc/mm/book3s64/radix_tlb.o
arch/powerpc/mm/book3s64/radix_tlb.c:419:20: error: unused function '_tlbie_pid_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
^
arch/powerpc/mm/book3s64/radix_tlb.c:663:20: error: unused function '_tlbie_va_range_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_va_range_lpid(unsigned long start, unsigned long end,
^
This is because those functions are only called from functions
enclosed in a #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
Move below functions inside that #ifdef
* __tlbie_pid_lpid(unsigned long pid,
* __tlbie_va_lpid(unsigned long va, unsigned long pid,
* fixup_tlbie_pid_lpid(unsigned long pid, unsigned long lpid)
* _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
* fixup_tlbie_va_range_lpid(unsigned long va,
* __tlbie_va_range_lpid(unsigned long start, unsigned long end,
* _tlbie_va_range_lpid(unsigned long start, unsigned long end,
Fixes:
f0c6fbbb9050 ("KVM: PPC: Book3S HV: Add support for H_RPT_INVALIDATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202307260802.Mjr99P5O-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3d72efd39f986ee939d068af69fdce28bd600766.1691568093.git.christophe.leroy@csgroup.eu
Arnd Bergmann [Wed, 9 Aug 2023 13:10:09 +0000 (15:10 +0200)]
powerpc: xmon: remove unused variables
Randconfig testing with W=1 showed up these warnings that I'd like to enable
by default:
arch/powerpc/xmon/xmon.c: In function 'dump_tlb_book3e':
arch/powerpc/xmon/xmon.c:3833:42: error: variable 'lrat' set but not used [-Werror=unused-but-set-variable]
3833 | int i, tlb, ntlbs, pidsz, lpidsz, rasz, lrat = 0;
| ^~~~
arch/powerpc/xmon/xmon.c:3831:23: error: variable 'lpidmask' set but not used [-Werror=unused-but-set-variable]
3831 | u32 mmucfg, pidmask, lpidmask;
| ^~~~~~~~
arch/powerpc/xmon/xmon.c:3831:14: error: variable 'pidmask' set but not used [-Werror=unused-but-set-variable]
3831 | u32 mmucfg, pidmask, lpidmask;
| ^~~~~~~
Just remove these as they have been unused since the code was added in 2010.
Fixes:
03247157f7391 ("powerpc/book3e: Add TLB dump in xmon for Book3E")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230809131024.2039647-2-arnd@kernel.org