OSDN Git Service
Sophie Matter [Wed, 11 Jul 2018 09:45:51 +0000 (11:45 +0200)]
staging: pi433: Comply with 80 character column limit
Lines have been split where it makes sense to shorten them in order
to comply with the coding standards and fix checkpatch.pl warnings.
There are still lines left that are too long, however breaking
those would impair readability.
Changes in v2:
- now working on staging-next branch of the staging tree
- the changes to the defines previously made are deleted
due to readability
Signed-off-by: Sophie Matter <sophie.matter@web.de>
Signed-off-by: Rico Schrage <rico.schrage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 9 Jul 2018 20:21:04 +0000 (22:21 +0200)]
staging: mt7621-pci: factor out mt7621_pci_get_cfgaddr function
To get config address the same pattern is repeated in some functions
along the code. Factor out a new mt7621_pci_get_cfgaddr for calculate
it and use it in convenient places. Adjust types to match to u32 where
is neccesary.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 9 Jul 2018 20:21:03 +0000 (22:21 +0200)]
staging: mt7621-pci: remove unused macro MV_READ_DATA
This macro is not being used at all along the code.
Just remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 9 Jul 2018 16:05:48 +0000 (18:05 +0200)]
staging: mt7621-gpio: remove driver from staging
Remove driver from staging. It has been accepted in
the linux-gpio tree.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Mon, 9 Jul 2018 13:50:39 +0000 (15:50 +0200)]
staging: rtl8723bs: use mac_pton()
Use mac_pton() instead of custom approach.
Remove the now unused hex2num_i() and hwaddr_aton_i().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 9 Jul 2018 11:28:30 +0000 (13:28 +0200)]
Revert "staging: mt7621-pinctrl: replace core_initcall_sync with builtin_platform_driver"
That patch causes the network interface on the device to stop working.
device_initcall() is called much later than core_initcall_sync() and
that seem to be a problem. Revert it to get a correct behaviour.
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Mon, 9 Jul 2018 04:52:45 +0000 (06:52 +0200)]
staging: mt7621-pinctrl: init *map to NULL for correct memory assignation
pinctrl_utils_reserve_map() calls krealloc() on *map. Because of this
*map need to be initialized to NULL before calling it.
Fixes:
62b6215c11ea ("staging: mt7621-pinctrl: make use of pinctrl_utils_reserve_map")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Radulescu [Mon, 9 Jul 2018 15:01:11 +0000 (10:01 -0500)]
staging: fsl-dpaa2/eth: Remove Rx frame size check
Most Ethernet drivers don't enforce the MTU value as upper limit
for ingress frames. We too support receiving frames larger than
MTU, so allow that.
Remove our ndo_change_mtu implementation, letting the default
stack implementation handle things. Also, set the max frame length
allowed by hardware only once at probe time, with the largest
possible value.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Radulescu [Mon, 9 Jul 2018 15:01:10 +0000 (10:01 -0500)]
staging: fsl-dpaa2/eth: MTU cleanup
Don't set the lower MTU limit explicitly, since we use
the default value anyway.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Radulescu [Mon, 9 Jul 2018 15:01:09 +0000 (10:01 -0500)]
staging: fsl-dpaa2/eth: Remove pointless instruction
We don't need to call dev_set_drvdata(dev, NULL) on driver
remove since core kernel code also performs this step.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Radulescu [Mon, 9 Jul 2018 15:01:08 +0000 (10:01 -0500)]
staging: fsl-dpaa2/eth: Remove obsolete reference
Commit
2b7c86eb7bf3 ("staging: fsl-dpaa2/eth: Don't enable FAS on Tx")
removed the status field from the TX confirm frame annotation,
but a reference to it remained in the description of free_tx_fd().
Remove it.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Radulescu [Mon, 9 Jul 2018 15:01:07 +0000 (10:01 -0500)]
staging: fsl-dpaa2/eth: Fix DMA mapping direction
We are using DMA_FROM_DEVICE when mapping RX frame buffers,
but DMA_BIDIRECTIONAL for unmap. Fix the direction for DMA
unmapping operation.
Fixes:
87eb55e418b7 ("staging: fsl-dpaa2/eth: Fix potential endless loop")
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 8 Jul 2018 11:58:12 +0000 (13:58 +0200)]
staging: rtl8188eu: replace tabs with spaces
Replace tabs with spaces in some function definitions and variable
declarations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 8 Jul 2018 11:58:11 +0000 (13:58 +0200)]
staging: rtl8188eu: refactor rtw_macaddr_cfg()
Use ether_addr_copy() instead of memcpy() to copy the mac address.
Using is_broadcast_ether_addr() and is_zero_ether_addr() instead of
testing each byte of the mac[] array for 0xff and 0x00 shortens the
code and improves readability.
Instead of a fixed default mac address use a random one to reduce the
likelihood of mac address collision.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 8 Jul 2018 10:38:55 +0000 (12:38 +0200)]
staging: rtl8723bs: remove braces from single if statement
Remove braces from single if statement to follow kernel coding style.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 8 Jul 2018 10:38:54 +0000 (12:38 +0200)]
staging: rtl8723bs: add missing blank lines
Add missing blank lines after declarations as reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 8 Jul 2018 10:38:53 +0000 (12:38 +0200)]
staging: rtl8723bs: remove blank lines
Remove unrequired blank lines as reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 8 Jul 2018 10:38:52 +0000 (12:38 +0200)]
staging: rtl8723bs: fix indentation
Remove unrequired extra indentations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 8 Jul 2018 10:38:51 +0000 (12:38 +0200)]
staging: rtl8723bs: replace tab with space
Replace tabs with spaces in some function definitions.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 8 Jul 2018 10:38:50 +0000 (12:38 +0200)]
staging: rtl8723bs: replace while with shorter for loop
Simplify rtw_get_rateset_len() by replacing the while loop
with a shorter for loop.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sat, 7 Jul 2018 14:55:07 +0000 (15:55 +0100)]
staging:rtl8192u: rename HT_EXTCHNL_OFFSET -> enum ht_extension_chan_width
remove the typedef of enumerated type HT_EXTCHNL_OFFSET and replace it with
'enum ht_extension_chan_offset'
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sat, 7 Jul 2018 14:55:05 +0000 (15:55 +0100)]
staging:rtl8192u: Add spaces required around operators - Coding Style
Added the spaces, required by coding style, around the various operators.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sat, 7 Jul 2018 14:55:03 +0000 (15:55 +0100)]
staging:rtl8192u: Add space required before '(' - Style
Simple addition of the coding style required space before '('.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sat, 7 Jul 2018 14:55:02 +0000 (15:55 +0100)]
staging:rtl8192u: rename HT_CHANNEL_WIDTH -> enum ht_channel_width
remove the typedef HT_CHANNEL_WIDTH and replace with 'enum ht_channel_width'
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 11 Jun 2018 07:42:02 +0000 (09:42 +0200)]
MAINTAINERS: update two greybus sections
Fix a file entry typo and drop the obsolete timesync entries, which were
all caught by:
scripts/get_maintainer.pl --self-test=patterns
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 7 Jul 2018 11:22:50 +0000 (13:22 +0200)]
staging: rtl8188eu: replace while with shorter for loop
Simplify rtw_get_rateset_len() by replacing the while loop
with a shorter for loop. Also replace tabs with spaces in
the definition line.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 7 Jul 2018 11:38:41 +0000 (13:38 +0200)]
staging: rtl8723bs: remove rtw_beamforming.h
The header rtw_beamforming.h is not used anywhere.
'git grep rtw_beamforming.h' returns nothing, remove the file.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 7 Jul 2018 11:38:40 +0000 (13:38 +0200)]
staging: rtl8723bs: remove rtw_br_ext.h
The header rtw_br_ext.h is not used anywhere.
'git grep rtw_br_ext.h' returns nothing, remove the file.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Collier [Fri, 6 Jul 2018 19:38:15 +0000 (20:38 +0100)]
staging: wlan-ng: remove unneeded parentheses from prism2mgmt.c
remove parentheses reported as unnecessary by checkpatch
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Collier [Fri, 6 Jul 2018 19:38:14 +0000 (20:38 +0100)]
staging: wlan-ng: fix expression continuation in prism2mgmt.c
checkpatch reports "CHECK: Logical continuations should be on the
previous line" when a continuation line begins with an
operator. Reformat the code so that the operator appears at the end of
the line being continued.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Collier [Fri, 6 Jul 2018 19:38:13 +0000 (20:38 +0100)]
staging: wlan-ng: fix expression continuation in prism2fw.c
checkpatch reports "CHECK: Logical continuations should be on the
previous line" when a continuation line begins with an
operator. Reformat the code so that the operator appears at the end of
the line being continued.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Sat, 7 Jul 2018 03:54:37 +0000 (20:54 -0700)]
staging/rtl8192u: fix defined but not used build warnings
Fix build warnings in rtl8192u when CONFIG_PROC_FS is not enabled
by marking the unused functions as __maybe_unused.
../drivers/staging/rtl8192u/r8192U_core.c:508:12: warning: 'proc_get_stats_ap' defined but not used [-Wunused-function]
../drivers/staging/rtl8192u/r8192U_core.c:527:12: warning: 'proc_get_registers' defined but not used [-Wunused-function]
../drivers/staging/rtl8192u/r8192U_core.c:568:12: warning: 'proc_get_stats_tx' defined but not used [-Wunused-function]
../drivers/staging/rtl8192u/r8192U_core.c:627:12: warning: 'proc_get_stats_rx' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jerry chuang <wlanfae@realtek.com>
Cc: devel@driverdev.osuosl.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Vernia [Sat, 7 Jul 2018 07:10:22 +0000 (03:10 -0400)]
staging: mt7621-pci: Move open-braces to match kernel code style
Moves some open-braces to the end of the conditional statement to match the
kernel's coding style
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Vernia [Sat, 7 Jul 2018 07:09:19 +0000 (03:09 -0400)]
staging: mt7621-pci: Add spaces after commas in pci-mt7621.c
Adds spaces after commas in parameter lists in pci-mt7621.c
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Vernia [Sat, 7 Jul 2018 07:08:36 +0000 (03:08 -0400)]
staging: mt7621-pci: Fix spacing around equals sign
Add spaces in front of the equals sign in assignment operations
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Vernia [Sat, 7 Jul 2018 07:07:55 +0000 (03:07 -0400)]
staging: mt7621-pci: Fix spaces around parenthesis in pci-7621.c
Adds spaces before open parenthesis, and removes spaces after open parenthesis
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Todd Poynor [Sat, 7 Jul 2018 06:43:10 +0000 (23:43 -0700)]
drivers/staging/gasket: Use refcount_read()
Use the refcount_read accessor function, avoid reaching into refcount
and atomic struct fields.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 14:20:56 +0000 (15:20 +0100)]
staging: rtl8192u: Add space after ', ' character - Coding Style
checkpatch requires a space after ',' - Added.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 14:20:55 +0000 (15:20 +0100)]
staging: rtl8192u: Add required space around '=' operator - Style
checkpatch requires spaces around '=' operator so added.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 14:20:54 +0000 (15:20 +0100)]
staging: rtl8192u: Remove space after cast - Coding Style
According to checkpatch - No space is necessary after a cast.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 14:20:53 +0000 (15:20 +0100)]
staging: rtl8192u: Add required spaces around '||' operator - Sytle
Additon of the coding style required spaces around the '||' operator.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 14:20:52 +0000 (15:20 +0100)]
staging: rtl8192u: Add space required around '==' opeartor - Style
Simple addition of the coding style required spaces around '==' operator.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 14:20:51 +0000 (15:20 +0100)]
staging: rtl8192u: Remove superfluous blank lines - Coding Style
Removal of extra blank lines from the ieee80211_softmac.c file
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 14:20:50 +0000 (15:20 +0100)]
staging: rtl8192u: Remove redundant definitions in header
Truncated header file removing definitions which aren't used.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 14:20:49 +0000 (15:20 +0100)]
staging: rtl8192u: Use memset to initialize memory, instead of loop.
Replaced memory initialising loop with memset instead.
Suggested-by: Andy Shevchenko
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Wed, 4 Jul 2018 11:59:21 +0000 (12:59 +0100)]
staging: rtl8192u: Use __func__ instead of hardcoded string - Style
Changed logging statements to use %s and __func__ instead of hard coding the
function name in a string.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Wed, 4 Jul 2018 11:37:41 +0000 (13:37 +0200)]
staging: rtl8188eu: rename Hal8188ERateAdaptive
Rename header and source file to avoid CamelCase.
Hal8188ERateAdaptive.h -> hal8188e_rate_adaptive.h
Hal8188ERateAdaptive.c -> hal8188e_rate_adaptive.c
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Wed, 4 Jul 2018 11:37:40 +0000 (13:37 +0200)]
staging: rtl8188eu: rename Hal8188EPhyReg.h
Rename header file to avoid CamelCase.
Hal8188EPhyReg.h -> hal8188e_phy_reg.h
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Wed, 4 Jul 2018 11:37:39 +0000 (13:37 +0200)]
staging: rtl8188eu: rename Hal8188EPhyCfg.h
Rename header file to avoid CamelCase.
Hal8188EPhyCfg.h -> hal8188e_phy_cfg.h
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Fri, 6 Jul 2018 14:56:01 +0000 (16:56 +0200)]
staging: rtl8723bs: remove rtl8192c_rf.h
All functions declared in rtl8192c_rf.h have no definition/are not used
in any other file/anywhere. Checked with 'git grep <function_name>'.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Thu, 5 Jul 2018 09:22:35 +0000 (14:52 +0530)]
staging: wilc1000: fix static checker warning to unlock mutex in wilc_deinit()
Fix for static checker warning inconsistent returns of
'hif_deinit_lock'(more details [1]).
"drivers/staging/wilc1000/host_interface.c:3390 wilc_deinit()
warn: inconsistent returns 'hif_deinit_lock'."
Fixes:
ff52a57a7a42 ("staging: wilc1000: move the allocation of cmd out
of wilc_enqueue_cmd()")
[1]. https://www.spinics.net/lists/linux-driver-devel/msg114216.html
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Mon, 2 Jul 2018 19:35:07 +0000 (21:35 +0200)]
staging: rtl8188eu: remove rtw_mp_phy_regdef.h
The header rtw_mp_phy_regdef.h is not used anywhere.
'git grep rtw_mp_phy_regdef.h' returns nothing, remove the file.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Razvan Stefanescu [Wed, 4 Jul 2018 08:17:44 +0000 (11:17 +0300)]
staging: fsl-dpaa2/ethsw: Update maintainers for Ethernet Switch driver
Removing myself as the maintainer for this driver and adding Ioana R.
and Ioana C.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com>
Acked-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Mon, 2 Jul 2018 13:27:35 +0000 (14:27 +0100)]
staging: rts5208: fix missing error check on call to rtsx_write_register
Currently the check on error return from the call to rtsx_write_register
is checking the error status from the previous call. Fix this by adding
in the missing assignment of retval.
Detected by CoverityScan, CID#709877
Fixes:
fa590c222fba ("staging: rts5208: add support for rts5208 and rts5288")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 6 Jul 2018 08:39:21 +0000 (11:39 +0300)]
Staging: Gasket: shift wrapping bug in gasket_read_modify_write_64()
This function only has one caller so mask_width is 1 and mask_shift is
32. Shifting an int by 32 bits is undefined, but I guess on GCC it
wraps to 0x1? Anyway it's supposed to be 0x100000000.
Fixes:
9a69f5087ccc ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 6 Jul 2018 08:38:25 +0000 (11:38 +0300)]
Staging: Gasket: fix a couple off by one bugs
The > should be >= or we end up writing one element beyond the end of
the interrupt_data->eventfd_ctxs[] array.
Fixes:
9a69f5087ccc ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 6 Jul 2018 08:37:56 +0000 (11:37 +0300)]
Staging: Gasket: uninitialized return in gasket_mmap()
We forgot to set the error code on this error path so ret can be
uninitialized.
Fixes:
9a69f5087ccc ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Wed, 4 Jul 2018 17:31:25 +0000 (10:31 -0700)]
drivers/staging/gasket: Use 2-factor allocator calls
As already done treewide, switch from open-coded multiplication to using
2-factor allocator helpers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:09 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: replace core_initcall_sync with builtin_platform_driver
We don't really need initialization of this at such an early stage.
Just use builtin_platform_driver to initialize this driver.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:08 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: remove 'rt2880_pinctrl_pin_dbg_show' callback
The debug information provided by this function does not make
sense at all, so just remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:07 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: use ternary operator return in rt2880_get_group_name
Trivial change to have only one return in 'rt2880_get_group_name'
function using a ternary operator instead of an if statement and
two returns.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:06 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: refactor rt2880_pinctrl_dt_node_to_map function
Using 'function' and 'group' bindings in the device tree give the
posibility of refactor 'rt2880_pinctrl_dt_node_to_map' and simplify
it a lot. Make use of 'for_each_node_with_property' function to count
number of groups for the node and iterate over the groups using
'of_property_for_each_string' calling 'pinctrl_utils_add_map_mux'
function which is the same of the custom function in this driver code
'rt2880_pinctrl_dt_subnode_to_map' which is not needed anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:05 +0000 (21:03 +0200)]
staging: mt7621-dts: use 'function' and 'group' for pinctrl bindings
According to documentation 'pinctrl-bindings.txt' bindings 'group'
and 'function' can be used directly. So replace all of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:04 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: make use of pinctrl_utils_reserve_map
Function rt2880_pinctrl_dt_node_to_map was using 'kzalloc' to
reserve map memory. There is a 'pinctrl_utils_reserve_map' to
do this function. Just use it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:03 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: replace uint8_t type with u8 for 'gpio' field
Struct 'rt2880_priv' contains a field 'gpio' which is defined
as uint8_t and should be defined with 'u8' which is preferred.
Update some cast along the code related with this new change.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:02 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: make use of pinctrl_utils_free_map
There was a custom 'rt2880_pinctrl_dt_free_map' function which
it was doing the same as pinctrl_utils_free_map defined in
'pinctrl-utils.h' header file. Use it instead avoiding
code duplications.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:01 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: use tabs instead of spaces in some indentations
Kernel coding style use tabs for indent code instead of spaces.
Fix some places where spaces were being used silencing also
checkpatch script complains.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:03:00 +0000 (21:03 +0200)]
staging: mt7621-pinctrl: align function parameters in some functions
Function parameters along the code has different alignment styles.
Just unify all of them making style consistent.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:02:59 +0000 (21:02 +0200)]
staging: mt7621-pinctrl: replace seq_printf with seq_puts
For a constant format without additional arguments, use seq_puts()
instead of seq_printf() fixing also the following checkpatch.pl
warning: 'Prefer seq_puts to seq_printf'
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:02:58 +0000 (21:02 +0200)]
staging: mt7621-pinctrl: avoid lines over 80 chars
This commit silence checkpatch warnings about lines which
exceeds 80 chars.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 28 Jun 2018 19:02:57 +0000 (21:02 +0200)]
staging: mt7621-pinctrl: avoid space after if condition
Adding spaces between if condition and parenthesis are not
needed at all and checkpatch script complains about them.
Fix one in driver code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergej Perschin [Thu, 5 Jul 2018 12:41:01 +0000 (14:41 +0200)]
staging: mt7621-mmc: Fix printk() facility level
The patch fixes the following issue:
WARNING: printk() should include KERN_<LEVEL> facility level
Signed-off-by: Sergej Perschin <ser.perschin@gmail.com>
Signed-off-by: Marcel Budoj <marcel.budoj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 5 Jul 2018 06:00:29 +0000 (08:00 +0200)]
staging: mt7621-gpio: use devm_kasprintf to set gpio banks labels
Instead of using a custom function to return desired name for gpio
use the default assigned one and concat it '-bankN' suffix using
devm_kasprintf kernel function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 5 Jul 2018 06:00:28 +0000 (08:00 +0200)]
staging: mt7621-gpio: assign gpio chip custom changes after bgpio_init
bgpio_init function set different data of the gpio chip, like the name.
We want specific name for each bank so to get that not overwritten
move all custom changes after the bgpio_init function call.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 5 Jul 2018 06:00:27 +0000 (08:00 +0200)]
staging: mt7621-gpio: use custom xlate function
The default gpio.of_xlate function assumes there is one gpio chip
for each devicetree node. Device tree had changed to only use one node,
which corresponds to 3 different gpio chips now. For that approach
to work we need a custom xlate function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Thu, 5 Jul 2018 06:00:26 +0000 (08:00 +0200)]
staging: mt7621-gpio: set irq chip name only once
There is only one irq chip so set its name only once
in driver probe function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radek Dostál [Mon, 2 Jul 2018 07:28:49 +0000 (09:28 +0200)]
staging: fbtft: indent fbtft_device_display - last entry - pdev - dev
The dev section was opening curly bracket, but not adding ident, which
resulted in two times "}," after each other with same indentation. Add
ident at the right place fixes this problem.
This formatting issue is not detectable by checkpatch.pl
Signed-off-by: Radek Dostál <radek.dostal@streamunlimited.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 30 Jun 2018 18:14:40 +0000 (20:14 +0200)]
staging: rtl8188eu: fix block comments - coding style
Write multiple single line comments as block comments to
follow kernel coding style and improve readability.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 30 Jun 2018 18:14:39 +0000 (20:14 +0200)]
staging: rtl8188eu: move return type to functions definition line
The return type of a function should be on the same line as the
definition.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 30 Jun 2018 18:14:38 +0000 (20:14 +0200)]
staging: rtl8188eu: reorder switch cases and remove default break
Reorder the cases of a switch statement to be in ascending order.
Remove unrequired break from default case.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 30 Jun 2018 11:36:28 +0000 (13:36 +0200)]
staging: rtl8723bs: simplify if else statement
Simplify if else statement to a single function call
by passing the variable.
Suggested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 30 Jun 2018 11:36:27 +0000 (13:36 +0200)]
staging: rtl8723bs: fix comparsion to true/false and brace issues
Use if(x) and if(!x) instead of comparsion to true/false.
Reported by checkpatch.
Remove unrequired braces from single if else statement.
Add missing space after else: else{ -> else {
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Fri, 29 Jun 2018 18:10:06 +0000 (19:10 +0100)]
staging: rtl8192u Remove redundant #include directive
The file includes the file rtl819x_HT.h, which has already been included by
the previously included file ieee80211.h
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Safonov [Sat, 30 Jun 2018 17:25:29 +0000 (20:25 +0300)]
staging:r8188eu: Use lib80211 to encrypt (WEP) tx frames
Put data to skb, decrypt with lib80211_crypt_wep, and place back to tx buffer.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Thu, 28 Jun 2018 17:02:52 +0000 (19:02 +0200)]
staging: rtl8723bs: remove pointless if else in rtw_sdio_resume()
Whether any of the conditions is true or not, the return variable
is always set to rtw_resume_process(padapter). Replace the if else
construct with a single call to rtw_resume_process(). Also remove
the now unused local variable pwrpriv.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Fri, 29 Jun 2018 18:59:44 +0000 (20:59 +0200)]
staging: rtl8188eu: remove unnecessary parentheses
Remove unnecessary parentheses as reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 30 Jun 2018 08:24:52 +0000 (10:24 +0200)]
staging: rtl8723bs: fix line over 80 characters
Fix line over 80 characters by replacing tab with space.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 30 Jun 2018 14:59:41 +0000 (16:59 +0200)]
staging: rtl8188eu: remove rtw_ioctl_rtl.h
The header rtw_ioctl_rtl.h is not used anywhere.
Running 'grep -r rtw_ioctl_rtl *' from kernel root
directory returns nothing, remove the file.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 1 Jul 2018 20:57:24 +0000 (13:57 -0700)]
staging: speakup: Replace strncpy with memcpy
gcc 8.1.0 generates the following warnings.
drivers/staging/speakup/kobjects.c: In function 'punc_store':
drivers/staging/speakup/kobjects.c:522:2: warning:
'strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
drivers/staging/speakup/kobjects.c:504:6: note: length computed here
drivers/staging/speakup/kobjects.c: In function 'synth_store':
drivers/staging/speakup/kobjects.c:391:2: warning:
'strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
drivers/staging/speakup/kobjects.c:388:8: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Que [Sat, 30 Jun 2018 02:49:38 +0000 (22:49 -0400)]
drivers/staging: Gasket driver framework + Apex driver
The Gasket (Google ASIC Software, Kernel Extensions, and Tools) kernel
framework is a generic, flexible system that supports thin kernel
drivers. Gasket kernel drivers are expected to handle opening and
closing devices, mmap'ing BAR space as requested, a small selection of
ioctls, and handling page table translation (covered below). Any other
functions should be handled by userspace code.
The Gasket common module is not enough to run a device. In order to
customize the Gasket code for a given piece of hardware, a device
specific module must be created. At a minimum, this module must define a
struct gasket_driver_desc containing the device-specific data for use by
the framework; in addition, the module must declare an __init function
that calls gasket_register_device with the module's gasket_driver_desc
struct. Finally, the driver must define an exit function that calls
gasket_unregister_device with the module's gasket_driver_desc struct.
One of the core assumptions of the Gasket framework is that precisely
one process is allowed to have an open write handle to the device node
at any given time. (That process may, once it has one write handle, open
any number of additional write handles.) This is accomplished by
tracking open and close data for each driver instance.
Signed-off-by: Rob Springer <rspringer@google.com>
Signed-off-by: John Joseph <jnjoseph@google.com>
Signed-off-by: Simon Que <sque@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Cooper [Sun, 1 Jul 2018 18:48:14 +0000 (14:48 -0400)]
staging/skein: Remove Skein and Threefish code
It's been four years since this was added. In the interim, skein has
not seen any mainstream adoption. Same with the threefish block cipher
upon which it's based.
In the discussion over which hash algorithm will replace SHA1 in git,
it's not one of the contenders.
There's absolutely no reason to think that there is anything wrong with
Skein or Threefish. The only reason for this removal is a lack of
adoption.
If a real user comes forward, I'd be happy to assist with integrating
this code into mainline.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 2 Jul 2018 06:21:54 +0000 (08:21 +0200)]
Merge 4.18-rc3 into staging-next
We want the staging/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 1 Jul 2018 23:04:53 +0000 (16:04 -0700)]
Linux 4.18-rc3
Linus Torvalds [Sun, 1 Jul 2018 19:38:16 +0000 (12:38 -0700)]
Merge tag 'for-4.18-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few regression fixes for qgroup rescan status tracking and
the vm_fault_t conversion that mixed up the error values"
* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix mount failure when qgroup rescan is in progress
Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf
Linus Torvalds [Sun, 1 Jul 2018 19:32:19 +0000 (12:32 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"Followup to procfs-seq_file series this window"
This fixes a memory leak by making sure that proc seq files release any
private data on close. The 'proc_seq_open' has to be properly paired
with 'proc_seq_release' that releases the extra private data.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
proc: add proc_seq_release
Linus Torvalds [Sun, 1 Jul 2018 19:20:20 +0000 (12:20 -0700)]
Merge tag 'staging-4.18-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a few small staging and IIO driver fixes for 4.18-rc3.
Nothing major or big, all just fixes for reported problems since
4.18-rc1. All of these have been in linux-next this week with no
reported problems"
* tag 'staging-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ion: Return an ERR_PTR in ion_map_kernel
staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()
iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
iio: buffer: fix the function signature to match implementation
iio: mma8452: Fix ignoring MMA8452_INT_DRDY
iio: tsl2x7x/tsl2772: avoid potential division by zero
iio: pressure: bmp280: fix relative humidity unit
Linus Torvalds [Sun, 1 Jul 2018 19:05:53 +0000 (12:05 -0700)]
Merge tag 'tty-4.18-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are five fixes for the tty core and some serial drivers.
The tty core ones fix some security and other issues reported by the
syzbot that I have taken too long in responding to (sorry Tetsuo!).
The 8350 serial driver fix resolves an issue of devices that used to
work properly stopping working as they shouldn't have been added to a
blacklist.
All of these have been in linux-next for a few days with no reported
issues"
* tag 'tty-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: prevent leaking uninitialized data to userspace via /dev/vcs*
serdev: fix memleak on module unload
serial: 8250_pci: Remove stalled entries in blacklist
n_tty: Access echo_* variables carefully.
n_tty: Fix stall at n_tty_receive_char_special().
Linus Torvalds [Sun, 1 Jul 2018 18:50:16 +0000 (11:50 -0700)]
Merge tag 'usb-4.18-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here is a number of USB gadget and other driver fixes for 4.18-rc3.
There's a bunch of them here, most of them being gadget driver and
xhci host controller fixes for reported issues (as normal), but there
are also some new device ids, and some fixes for the typec code.
There is an acpi core patch in here that was acked by the acpi
maintainer as it is needed for the typec fixes in order to properly
solve a problem in that driver.
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
usb: chipidea: host: fix disconnection detect issue
usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-entered
typec: tcpm: Fix a msecs vs jiffies bug
NFC: pn533: Fix wrong GFP flag usage
usb: cdc_acm: Add quirk for Uniden UBC125 scanner
staging/typec: fix tcpci_rt1711h build errors
usb: typec: ucsi: Fix for incorrect status data issue
usb: typec: ucsi: acpi: Workaround for cache mode issue
acpi: Add helper for deactivating memory region
usb: xhci: increase CRS timeout value
usb: xhci: tegra: fix runtime PM error handling
usb: xhci: remove the code build warning
xhci: Fix kernel oops in trace_xhci_free_virt_device
xhci: Fix perceived dead host due to runtime suspend race with event handler
dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation
usb: gadget: dwc2: fix memory leak in gadget_init()
usb: gadget: composite: fix delayed_status race condition when set_interface
usb: dwc2: fix isoc split in transfer with no data
usb: dwc2: alloc dma aligned buffer for isoc split in
usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub
...
Linus Torvalds [Sun, 1 Jul 2018 17:45:13 +0000 (10:45 -0700)]
Merge tag 'dma-mapping-4.18-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma mapping fixlet from Christoph Hellwig:
"Add a missing export required by riscv and unicore"
* tag 'dma-mapping-4.18-2' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: export swiotlb_dma_ops
Linus Torvalds [Sat, 30 Jun 2018 21:16:30 +0000 (14:16 -0700)]
Merge branch 'parisc-4.18-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes and cleanups from Helge Deller:
"Nothing exiting in this patchset, just
- small cleanups of header files
- default to 4 CPUs when building a SMP kernel
- mark 16kB and 64kB page sizes broken
- addition of the new io_pgetevents syscall"
* 'parisc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Build kernel without -ffunction-sections
parisc: Reduce debug output in unwind code
parisc: Wire up io_pgetevents syscall
parisc: Default to 4 SMP CPUs
parisc: Convert printk(KERN_LEVEL) to pr_lvl()
parisc: Mark 16kB and 64kB page sizes BROKEN
parisc: Drop struct sigaction from not exported header file